Search Results

Search found 2349 results on 94 pages for 'webdev webserver'.

Page 41/94 | < Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >

• Solaris 11 pkg fix is my new friend

  - by user12611829

  While putting together some examples of the Solaris 11 Automated Installer (AI), I managed to really mess up my system, to the point where AI was completely unusable. This was my fault as a combination of unfortunate incidents left some remnants that were causing problems, so I tried to clean things up. Unsuccessfully. Perhaps that was a bad idea (OK, it was a terrible idea), but this is Solaris 11 and there are a few more tricks in the sysadmin toolbox. Here's what I did. # rm -rf /install/* # rm -rf /var/ai # installadm create-service -n solaris11-x86 --imagepath /install/solaris11-x86 \ -s [email protected] Warning: Service svc:/network/dns/multicast:default is not online. Installation services will not be advertised via multicast DNS. Creating service from: [email protected] DOWNLOAD PKGS FILES XFER (MB) SPEED Completed 1/1 130/130 264.4/264.4 0B/s PHASE ITEMS Installing new actions 284/284 Updating package state database Done Updating image state Done Creating fast lookup database Done Reading search index Done Updating search index 1/1 Creating i386 service: solaris11-x86 Image path: /install/solaris11-x86 So far so good. Then comes an oops..... setup-service[168]: cd: /var/ai//service/.conf-templ: [No such file or directory] ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ This is where you generally say a few things to yourself, and then promise to quit deleting configuration files and directories when you don't know what you are doing. Then you recall that the new Solaris 11 packaging system has some ability to correct common mistakes (like the one I just made). Let's give it a try. # pkg fix installadm Verifying: pkg://solaris/install/installadm ERROR dir: var/ai Group: 'root (0)' should be 'sys (3)' dir: var/ai/ai-webserver Missing: directory does not exist dir: var/ai/ai-webserver/compatibility-configuration Missing: directory does not exist dir: var/ai/ai-webserver/conf.d Missing: directory does not exist dir: var/ai/image-server Group: 'root (0)' should be 'sys (3)' dir: var/ai/image-server/cgi-bin Missing: directory does not exist dir: var/ai/image-server/images Group: 'root (0)' should be 'sys (3)' dir: var/ai/image-server/logs Missing: directory does not exist dir: var/ai/profile Missing: directory does not exist dir: var/ai/service Group: 'root (0)' should be 'sys (3)' dir: var/ai/service/.conf-templ Missing: directory does not exist dir: var/ai/service/.conf-templ/AI_data Missing: directory does not exist dir: var/ai/service/.conf-templ/AI_files Missing: directory does not exist file: var/ai/ai-webserver/ai-httpd-templ.conf Missing: regular file does not exist file: var/ai/service/.conf-templ/AI.db Missing: regular file does not exist file: var/ai/image-server/cgi-bin/cgi_get_manifest.py Missing: regular file does not exist Created ZFS snapshot: 2012-12-11-21:09:53 Repairing: pkg://solaris/install/installadm Creating Plan (Evaluating mediators): | DOWNLOAD PKGS FILES XFER (MB) SPEED Completed 1/1 3/3 0.0/0.0 0B/s PHASE ITEMS Updating modified actions 16/16 Updating image state Done Creating fast lookup database Done In just a few moments, IPS found the missing files and incorrect ownerships/permissions. Instead of reinstalling the system, or falling back to an earlier Live Upgrade boot environment, I was able to create my AI services and now all is well. # installadm create-service -n solaris11-x86 --imagepath /install/solaris11-x86 \ -s [email protected] Warning: Service svc:/network/dns/multicast:default is not online. Installation services will not be advertised via multicast DNS. Creating service from: [email protected] DOWNLOAD PKGS FILES XFER (MB) SPEED Completed 1/1 130/130 264.4/264.4 0B/s PHASE ITEMS Installing new actions 284/284 Updating package state database Done Updating image state Done Creating fast lookup database Done Reading search index Done Updating search index 1/1 Creating i386 service: solaris11-x86 Image path: /install/solaris11-x86 Refreshing install services Warning: mDNS registry of service solaris11-x86 could not be verified. Creating default-i386 alias Setting the default PXE bootfile(s) in the local DHCP configuration to: bios clients (arch 00:00): default-i386/boot/grub/pxegrub Refreshing install services Warning: mDNS registry of service default-i386 could not be verified. # installadm create-service -n solaris11u1-x86 --imagepath /install/solaris11u1-x86 \ -s [email protected] Warning: Service svc:/network/dns/multicast:default is not online. Installation services will not be advertised via multicast DNS. Creating service from: [email protected] DOWNLOAD PKGS FILES XFER (MB) SPEED Completed 1/1 514/514 292.3/292.3 0B/s PHASE ITEMS Installing new actions 661/661 Updating package state database Done Updating image state Done Creating fast lookup database Done Reading search index Done Updating search index 1/1 Creating i386 service: solaris11u1-x86 Image path: /install/solaris11u1-x86 Refreshing install services Warning: mDNS registry of service solaris11u1-x86 could not be verified. # installadm list Service Name Alias Of Status Arch Image Path ------------ -------- ------ ---- ---------- default-i386 solaris11-x86 on i386 /install/solaris11-x86 solaris11-x86 - on i386 /install/solaris11-x86 solaris11u1-x86 - on i386 /install/solaris11u1-x86 This is way way better than pkgchk -f in Solaris 10. I'm really beginning to like this new IPS packaging system.

  Read the article

• Creating alias and script alias in Ubuntu

  - by Jesi

  I am configuring LG looking glass on Ubuntu. I have followed this link. In step 3 they said to add following two lines to webserver config: Alias /lg/favicon.ico /usr/local/httpd/htdocs/lg/favicon.ico ScriptAlias /lg /usr/local/httpd/htdocs/lg/lg.cgi I have added it to my webserver config: #vi /etc/apache2/sites-available/default Alias /lg/favicon.ico "/usr/local/httpd/htdocs/lg/favicon.ico" <Directory "/usr/local/httpd/htdocs/lg/favicon.ico"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> ScriptAlias /lg/ "/usr/local/httpd/htdocs/lg/lg.cgi" <Directory "/usr/local/httpd/htdocs/lg/lg.cgi"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> When I tried http://127.0.0.1/lg in my browser, it shows not found. I am new with web-server, can anyone help me please?

  Read the article

• PHPPgAdmin not working in Ubuntu 14.04

  - by Adam

  After a fresh install of Ubuntu 14.04, I've installed postgresql and phppgadmin from the Ubuntu repos. I am using the Apache2 webserver. PHP is working fine in the webserver, as is PHPMyAdmin, but PHPPgAdmin is not working. When I try to access it at localhost/phppgadmin, I get a 404 message. I've tried creating a symlink in /var/www to the phppgadmin content, but that doesn't seem to work. How do I fix this? EDIT: note that I am using a local proxy server (squid) through which I funnel all my online traffic. While this may be part of the problem, I would be surprised if it was, because I am still on the same machine as phppgadmin and the requests logged in the apache access log indicate that incoming requests for the page are coming from the local machine (which is allowed in the policies for phppgadmin, if I understand things correctly).

  Read the article

• Sharing one static ip for both ftp and www service

  - by user11496

  Trying to figure out how to update the Zone record and configure webserver so that one application on the webserver is accessible by public. I'm completely not good at NS/DNS/NAT/firewall/routing/port forwarding/networking etc. "faraday" is the intranet name. Everyone within local network can access all applications hosted on "faraday". Hostname for webserver is "www", FTP server is "ftpserver". Both servers running RHEL4 OS. The goal is to allow anyone outside the company network (public) to access only one of the many applications on "faraday". Hope somebody can help me with some of the questions below, if not all. From zoneedit record, the static IP is used by FTP now. Can I use the same existing static IP - 219.95.10.100, for web service? Currently anyone who enter "http://www.abc.com.my" will be directed to "http://www.abc.com". I don't want this to change. Currently, no one else, except employee on local network, can access "faraday" web pages. How to configure so that when anyone type "http://thisapp.abc.com.my" on their web browser, the url will lead them to "http://faraday/thisapp" (application folder is /var/www/html/thisapp on RHEL4 web server). If possible, how to set the URL will continue to show "http://thisapp.abc.com.my" instead of "http://faraday/thisapp" How to limit/restrict user (those who are not from local network) so they only have access to "http://thisapp.abc.com.my", but not "http://faraday" or "http://faraday/anotherapp", etc. What's the configuration changes needed in /etc/httpd.conf on web server? Company domain name is "abc.com.my". Following is the zone records on www.zoneedit.com. Subdomain Type IP sdsl A 219.95.10.100 ftp CNAME sdsl.abc.com.my @ NS ns3.zoneedit.com @ NS ns7.zoneedit.com WebForward record: New Domain Destination Cloaked www.abc.com.my http://www.abc.com N On my local DNS server, there are 2 zone files: abc.com.my and pnmy.abc.com. > cat abc.com.my.zone ftp CNAME ftp.pnmy.abc.com. sdsl A 219.95.10.100 > cat pnmy.abc.com.zone ftp CNAME ftpserver ftpserver A 172.16.5.1 faraday CNAME www www A 172.16.5.2

  Read the article

• Thomson TG782T ADSL2+ modem loses network connection

  - by squashbuff

  I am using an ubuntu 10.04 server (running on a Lenovo Thinkpad notebook) as my webserver. It is performing well in terms of handling the traffic etc. However my internet connection is ADSL2+ (using Thomson TG782T modem-router) and if the modem is reset, then my server loses network connection. The networkmanager icon shows a red exclamation mark showing that is has no connection. But as soon as I click on it and tell it to connect to eth0, the connection is back on. It must be something that networkmanager is failing to do and because of this, the reliability of my webserver is suffering. Any advice on how this can be fixed?

  Read the article

• Forward .html/.htm to .php with .config

  - by PhilipK

  I'm moving a site from my linux hosted server to a client's windows hosted server. The .htaccess file no longer works and I'm told that windows servers use .config . How can I forward all users accessing .html & .htm files to the equivalent .php file. Server Info... OS/Hosting Type: Windows / Shared Hosting .Net Runtime Version: ASP.Net 2.0/3.0/3.5 PHP Version: PHP 5.2 IIS Version: IIS 7.0 Data Center: US Regional EDIT *Hosting provided by GoDaddy Was told by a friend following should work but it has no effect on the site. <configuration> <system.webServer> <handlers> <add name="PHP-FastCGI" verb="*" path="*.html" modules="FastCgiModule" scriptProcessor="c:\php\php-cgi.exe" resourceType="Either" /> </handlers> </system.webServer> </configuration>

  Read the article

• Do PHP-FPM (and other PHP handlers) need execute permissions on the PHP files they're serving?

  - by Andrew Cheong

  I read in a post at Server Fault that PHP-FPM needs execute permissions. However, the answer in When creating a website, what permissions and directory structure? only grants read and write permissions to PHP-FPM. Maybe I don't quite understand how PHP handlers (or CGI in general) work, but the two claims seem contradictory to me. As I understand, when Apache / Nginx gets a request for foobar.php, it "passes" the file to an appropriate handler. That is, I imagine it's as if www-root (or apache or whomever the webserver's running as) were to run some command, /usr/sbin/php-fpm foobar.php Actually, no, that's naive, I just realized. PHP-FPM must be a running instance (if it's to be performant, and cache, etc.), so probably PHP-FPM is just being told, "Hey, quick, process this file for me!" In either case, I don't see why execute permissions are necessary. It's not like the webserver needs to literally execute the file, i.e. ./foobar.php Is the Server Fault answer simply mistaken?

  Read the article

• Install Java on Ubuntu server (Parallels Plesk)

  - by atMaarten

  I want to install Java to my server so I can use PHP shell_exec to compile Java online. So I'm trying to install Java on my webserver (Ubuntu - Parallels Plesk). I logged in to the server with PuTTY and tried some commands like: sudo apt-get install openjdk-6-jre or sudo apt-get install oracle-java7-installer But than I get error's like: Package drweb-bases must be reinstalled, but there can be no archive found. I tried to uninstall drweb-bases, reinstall, no matter what. I still get that error. What you I need to do? I am doing it completly wrong? Am I not destroying my webserver? There is not much to find on this topic on Google.

  Read the article

• nginx bad gateway 502 with mono fastcgi

  - by Bradley Lederholz Leatherwood

  Hello so I have been trying to get my website to run on mono (on ubuntu server) and I have followed these tutorials almost to the letter: However when my directory is not blank fastcgi logs reveal this: Notice Beginning to receive records on connection. Error Failed to process connection. Reason: Exception has been thrown by the target of an invocation. I am not really sure what this means, and depending on what I do I can get another error that tells me the resource cannot be found: The resource cannot be found. Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly. Requested URL: /Default.aspx/ Version information: Mono Runtime Version: 2.10.8 (tarball Thu Aug 16 23:46:03 UTC 2012) ASP.NET Version: 4.0.30319.1 If I should provide some more information please let me know. Edit: I am now getting a nginx gateway error. My nginx configuration file looks like this: server { listen 2194; server_name localhost; access_log $HOME/WWW/nginx.log; location / { root $HOME/WWW/dev/; index index.html index.html default.aspx Default.aspx Index.cshtml; fastcgi_index Views/Home/; fastcgi_pass 127.0.0.1:8000; include /etc/nginx/fastcgi_params; } } Running the entire thing with xsp4 I have discovered what the "Exception has been thrown by the target of an invocation." Handling exception type TargetInvocationException Message is Exception has been thrown by the target of an invocation. IsTerminating is set to True System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. Server stack trace: at System.Reflection.MonoCMethod.Invoke (System.Object obj, BindingFlags invokeAttr, System.Reflection.Binder binder, System.Object[] parameters, System.Globalization.CultureInfo culture) [0x00000] in :0 at System.Reflection.MethodBase.Invoke (System.Object obj, System.Object[] parameters) [0x00000] in :0 at System.Runtime.Serialization.ObjectRecord.LoadData (System.Runtime.Serialization.ObjectManager manager, ISurrogateSelector selector, StreamingContext context) [0x00000] in :0 at System.Runtime.Serialization.ObjectManager.DoFixups () [0x00000] in :0 at System.Runtime.Serialization.Formatters.Binary.ObjectReader.ReadNextObject (System.IO.BinaryReader reader) [0x00000] in :0 at System.Runtime.Serialization.Formatters.Binary.ObjectReader.ReadObjectGraph (BinaryElement elem, System.IO.BinaryReader reader, Boolean readHeaders, System.Object& result, System.Runtime.Remoting.Messaging.Header[]& headers) [0x00000] in :0 at System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.NoCheckDeserialize (System.IO.Stream serializationStream, System.Runtime.Remoting.Messaging.HeaderHandler handler) [0x00000] in :0 at System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.Deserialize (System.IO.Stream serializationStream) [0x00000] in :0 at System.Runtime.Remoting.RemotingServices.DeserializeCallData (System.Byte[] array) [0x00000] in :0 at (wrapper xdomain-dispatch) System.AppDomain:DoCallBack (object,byte[]&,byte[]&) Exception rethrown at [0]: --- System.ArgumentException: Couldn't bind to method 'SetHostingEnvironment'. at System.Delegate.GetCandidateMethod (System.Type type, System.Type target, System.String method, BindingFlags bflags, Boolean ignoreCase, Boolean throwOnBindFailure) [0x00000] in :0 at System.Delegate.CreateDelegate (System.Type type, System.Type target, System.String method, Boolean ignoreCase, Boolean throwOnBindFailure) [0x00000] in :0 at System.Delegate.CreateDelegate (System.Type type, System.Type target, System.String method) [0x00000] in :0 at System.DelegateSerializationHolder+DelegateEntry.DeserializeDelegate (System.Runtime.Serialization.SerializationInfo info) [0x00000] in :0 at System.DelegateSerializationHolder..ctor (System.Runtime.Serialization.SerializationInfo info, StreamingContext ctx) [0x00000] in :0 at (wrapper managed-to-native) System.Reflection.MonoCMethod:InternalInvoke (System.Reflection.MonoCMethod,object,object[],System.Exception&) at System.Reflection.MonoCMethod.Invoke (System.Object obj, BindingFlags invokeAttr, System.Reflection.Binder binder, System.Object[] parameters, System.Globalization.CultureInfo culture) [0x00000] in :0 --- End of inner exception stack trace --- at (wrapper xdomain-invoke) System.AppDomain:DoCallBack (System.CrossAppDomainDelegate) at (wrapper remoting-invoke-with-check) System.AppDomain:DoCallBack (System.CrossAppDomainDelegate) at System.Web.Hosting.ApplicationHost.CreateApplicationHost (System.Type hostType, System.String virtualDir, System.String physicalDir) [0x00000] in :0 at Mono.WebServer.VPathToHost.CreateHost (Mono.WebServer.ApplicationServer server, Mono.WebServer.WebSource webSource) [0x00000] in :0 at Mono.WebServer.XSP.Server.RealMain (System.String[] args, Boolean root, IApplicationHost ext_apphost, Boolean quiet) [0x00000] in :0 at Mono.WebServer.XSP.Server.Main (System.String[] args) [0x00000] in :0

  Read the article

• Coda 2 and SCP uploading files with the wrong permission

  - by Tom Black

  Currently I have a basic Ubuntu server running a website. The website is for a few students learning HTML/PHP and each student has their own account with a symbolic link to the shared website folder. Since the students are working on the website together, each user needs to be able to modify all the files (index.html for example). So I created a Webdev group containing all of the students with the default umask of 0002 set in their .bashrc (This allows newly created files to be 774). The shared folder is owned by the group Webdev with a chmod g+s so that new files/folders also belong to the group Webdev. The problem is that the students are using an IDE (Coda 2) and when they create a new file or folder using the IDE the file has the permissions of 644 on the server (not group writable). However when I make a new file through connecting with Cyberduck (SFTP client) the file permissions are 664 (as they should be). So I don't understand why Coda would be any different. However, after some trial and error I believe that Coda is first creating the file on local disk and then uploading that file to the server. On a mac by default a newly created file is 644. When the client uploads a file that's already 644 it stays 644 on the server side (umask is kind of useless in this situation). I've also tried creating ACL permissions for that folder but an uploaded file from my mac via SCP doesn't get the default ACL permissions. In Coda there is an option to change file permissions on a transfer. However this option seems to apply a chmod to all files being uploaded or saved. When one of students is modifying a file created by someone else when they try to upload the file or save it Coda tries to also do a chmod but fails because that user isn't the owner of the file. My current solution is using bindfs... I mount the shared web folder and bindfs sets permissions and group ownership of newly created files. However, bindfs seems to be a bit slow and I'm sure there is a better solution. Even if the students ditched Coda 2 and used Mac vim with scp the newly created files on the server would behave the same (644) which is default on the mac. Other options... 1) Either I teach the students to use (ssh/chmod) with their IDE to change their own file permissions when uploading. 2) I make all the students' Macs have the default umask of 0002 which would upload files with the right permissions. 3) Write a corn script to fix the file permissions every 5 to 15 minutes... (This option I think is the worst if students are working together at the same time). Is there any way that I could make all files that are uploaded via SCP have the default file permissions of 664 even though the uploaded file has a lower permission? (After hours of searching I don't think this is possible) I guess a corn script is my best option for novice users. How do web developers work together on larger sites? similar to this: http://serverfault.com/questions/283492/how-to-specify-file-permission-when-putting-a-file-using-openssh-sftp-command Also similar: http://serverfault.com/questions/395418/managing-linux-directory-permissions-sftp

  Read the article

• ASP.NET vNext in Visual Studio &ldquo;14&rdquo; CTP

  - by TATWORTH

  Originally posted on: http://geekswithblogs.net/TATWORTH/archive/2014/06/05/asp.net-vnext-in-visual-studio-ldquo14rdquo-ctp.aspxMicrosoft have issued a long article about Visual Studio “14” CTP at http://blogs.msdn.com/b/webdev/archive/2014/06/03/asp-net-vnext-in-visual-studio-14-ctp.aspx. Please remember that the 14” CTP does NOT have “side-by-side” support and thus should be installed on PC or virtual machine with no other version of Visual Studio installed.

  Read the article

• Improvements to ASP.NET Web Forms

  - by TATWORTH

  Originally posted on: http://geekswithblogs.net/TATWORTH/archive/2014/05/19/improvements-to-asp.net-web-forms.aspxContrary to what the prophets of gloom might say, the ASP.NET team at Microsoft are continuing to develop web forms. Please see the article at http://blogs.msdn.com/b/webdev/archive/2014/05/13/improvements-to-asp-net-web-forms.aspx The bulk of these changes should be part of VS2013 Update 2 which is now available as an RTM.

  Read the article

• How to securely enable file sharing over PPTP on Windows 2008 Server

  - by Damage

  I have set up a Windows SBS 2003 domain (LAN) and a stand-alone Windows 2008 Server (web server) at another location (workgroup). I established PPTP VPN connection (SBS dials web server) over which users from LAN should be able to access web server. On web server I enabled TCP/IPv4 and File and Printer sharing protocol. It has a few external addresses (one of them is default) AND one local address (192.x.x.x) assigned to network adapter. Firewall allows port 445 for file sharing. There's the problem - I can not enable web server file shares to be visible to LAN users and ONLY to LAN users: From SBS I can access webserver but I cannot access webserver from LAN workstations (XP, Vista). I have had same configuration - I have just replaced old (web server) Windows 2003 server with 2008 so SBS settings are the same (static route, DNS etc.). How can I enable file sharing on web server for LAN workstations? Now I have opened File and printer sharing to the internet which is of course totaly unsecure. I tried to secure the tunnel so I moved RAS (VPN) connection (Network Center) on web server to "Private" profile and moved firewall port 445 to "Private" profile but suddenly file sharing does not work and I cannot telnet webserver on port 445. How can I secure file sharing so I do not have to open it to the internet?

  Read the article

• IIS7 error config and remote errors

  - by Kev

  Certain IIS7/7.5 500.19 configuration errors only render on a browser running on the local server. This appears to happen regardless of whether I set <httpErrors errorMode="Detailed" existingResponse="PassThrough" /> in the system.webServer section of a site's web.config file (or even globally for that matter). For example, I had a developer who reported that he was just getting the generic IIS7 500 error page: This was happening even though he had the following configured in his web.config: <configuration> <system.webServer> <httpErrors errorMode="Detailed" existingResponse="PassThrough" /> </system.webServer> </configuration> If I browse to the site on the server itself I see (some sensitive info redacted): Would the reason for this be that if the web.config has errors it therefore can't be parsed. Because it can't be parsed the local <httpErrors> setting doesn't get read and thus causes IIS to revert to default settings (i.e. DetailedLocalOnly)? Update: @LazyOne - suggested setting the above config at the server level which I already tried. This resulted in just raw 500 errors:

  Read the article

• apache authentication

  - by veilig

  I'm trying to set up a local webserver on my network. I want to be able to be able to access the webserver from any machine inside my network w/out authenticating. and two extra domains need access to it w/out authenticating. Everyone else I would like to authenticate in. so far, I can get to it from inside my network. and the two extra domains can access my webserver, but everyone else is just hanging. They don't get an authentication or anything. can anyone tell me what I'm doing wrong here? This is part of my apache's site-available file so far: <Directory /path/to/server/> Options Indexes FollowSymLinks -Multiviews Order Deny,Allow Deny from All Allow from 192.168 Allow from localhost Allow from domain1 Allow from domain2 AuthType Basic AuthName "my authentication" AuthUserFile /path/to/file Require valid-user Satisfy Any AllowOverride All <Files .htaccess> Order Allow,Deny Allow from All </Files> </Directory>

  Read the article

• Cisco router not receiving OSPF updates

  - by WebDevHobo

  Or at least, that's what I think is happening. There doesn't appear to be a debug command for this, or to see if something is in the routing table. I'm testing out this setup in Packet Tracer. I have 3 routers and a webserver From left to right, you have: Webserver - Router1 - Router2 - Router3 Router1 and Router2 can succesfully ping WebServer. Router3 cannot. Router2 has a default gateway set, to send all not-recognized data through its serial interface to Router1. Like this: ip route 0.0.0.0 0.0.0.0 Serial 0/0/1 Serial 0/0/1 being the connection to Router1 Router2 and Router3 have OSPF configured. From their "show run": Router2: router ospf 1 log-adjacency-changes passive-interface Serial0/0/1 network 10.1.1.0 0.0.0.3 area 0 default-information originate ! Router3: router ospf 1 log-adjacency-changes network 10.1.1.0 0.0.0.3 area 0 passive-interface FastEthernet0/0 ! I was under the assumption that setting default-information originate on Router2 would give Router3 the needed information. What's going wrong here? The interfaces are up. Ip addresses are with mask-range, clock rate is set at correct end. I don't know what else to check.

  Read the article

• Balancing internal services using a Cisco CSS 11501

  - by Ladadadada

  First, the background to the problem: I have a Cisco CSS11501 that I am using to load balance a few web servers. These web servers have two network interfaces, one internal and one external and we are sending the requests to the internal interface. We have the CSS configured to do NAT because our webservers need to see the client's IP address. Because the TCP packets hit the webservers with a source address on the Internet, the webserver tries to send the packet back to the client over the external interface and not through the load balancer. In order to stop these requests being sent back out to the Internet via the external interface, we added a routing rule on these boxes so that all traffic with a source address on the internet will use the load balancer as the gateway. This part works fine. What I would also like to to is use the CSS as a load balancer for internal services such as our MySQL slaves. When I do this, I run into a similar problem; the TCP connection goes from the web server to the load balancer and then from the load balancer to the MySQL slave but the CSS spoofs a source address of the original webserver. The MySQL slave then tries to send the response directly to the webserver via the internal network and not via the load balancer. The ideal solution would be to tell the CSS not to do source address spoofing on the internal network and only do it for requests originating on the Internet. Is this possible ? Failing that, is there a way of directing the load balanced traffic back through the load balancer while keeping the other traffic (say SSH) purely on the internal network ? Is there another way of using the CSS11501 to load balance internal services ?

  Read the article

• Squid reverse proxy array - siblings not communicating with each other

  - by V. Romanov

  I want to set up 2 squid servers to act as reverse proxy and cache for a webserver on our intranet. The load balancing will be done with DNS round robin or just different mappings for different clients. The thing is, I want both servers to try and contact each other to see if they have the object required in cache before contacting the webserver for it (the network that servers the webserver is the bottleneck and I'm trying to eliminate it) Both squids are configured the same, here are the relevant config lines : acl dvr1_cache_it_best_tv_com dstdomain dvr1.cache.it.best-tv.com acl squid1_it_best_tv_com dstdomain squid1.it.best-tv.com acl squid2_it_best_tv_com dstdomain squid2.it.best-tv.com http_access allow dvr1_cache_it_best_tv_com http_access allow squid1_it_best_tv_com http_access allow squid2_it_best_tv_com http_access allow all http_port 8081 accel defaultsite=dvr1.cache.it.best-tv.com cache_peer dvr1.origin.it.best-tv.com parent 80 0 no-query originserver name=Proxy_dvr1_origin_it_best_tv_com cache_peer squid1.it.best-tv.com sibling 8081 3130 weight=10 name=Proxy_Squid1_it_best_tv_com cache_peer squid2.it.best-tv.com sibling 8081 3130 weight=10 name=Proxy_Squid2_it_best_tv_com cache_peer_access Proxy_dvr1_origin_it_best_tv_com allow dvr1_cache_it_best_tv_com cache_peer_access Proxy_squid1_it_best_tv_com allow squid1_it_best_tv_com cache_peer_access Proxy_squid1_it_best_tv_com allow squid2_it_best_tv_com cache_peer_access Proxy_squid1_it_best_tv_com allow dvr1_cache_it_best_tv_com cache_peer_access Proxy_squid2_it_best_tv_com allow squid1_it_best_tv_com cache_peer_access Proxy_squid2_it_best_tv_com allow squid2_it_best_tv_com cache_peer_access Proxy_squid2_it_best_tv_com allow dvr1_cache_it_best_tv_com just to make it clear - dvr1.cache is the alias for the proxy servers. dvr1.origin is the web server. Both servers work, both serve content and cache it and work fine. However, when I clear the cache on one server and then access it, it gets the content from the parent (DVR1_ORIGIN) instead of going to the sibling squid. What did I configure wrong? Or perhaps I don't understand the architecture correctly? I read the squid manuals but as far as I see i did it all by the book and yet it doesn't work right. Any help will be appreciated!

  Read the article

• DNS resolve .com domain on local domain

  - by Joost Verdaasdonk

  I'm building a local 2008 R2 domain as a test case to be able to write a roadmap for the real new domain that needs to be created soon. What I would like to know if I'm able to make a record in DNS that will point the domain name: www.example.com and example.com to one of the servers in my network. I tried creating an a-record for it but that doesn't work. To be honest I'm not even sure if this is possible? So can I do this? That way I would be able to fully test all our services (and webb app) offline before I build the real domain and switch the DNS records at the provider. Some advice if possible and where to start is appreciated. The solution (Thanks Brent): Create new Forward lookup zone pointing to example.com Create empty A record pointing to IP of the webserver you are targeting If www is needed create A record with Name: www and IP of your webserver sub domains repeat the process but then with names for example: sub or www.sub (and ip your webserver) Be aware of the DNS Cache while you are in this process. Things can take time or do the following: Right click the server and choose clear cache in CMD: ipconfig /flushdns (to flush the client cache)

  Read the article

• How to limit reverse SSH tunelling ports?

  - by funktku

  We have a public server which accepts SSH connections from multiple clients behind firewalls. Each of these clients create a Reverse SSH tunnel by using the ssh -R command from their web servers at port 80 to our public server. The destination port(at the client side) of the Reverse SSH Tunnel is 80 and the source port(at public server side) depends on the user. We are planning on maintaining a map of port addresses for each user. For example, client A would tunnel their web server at port 80 to our port 8000; client B from 80 to 8001; client C from 80 to 8002. Client A: ssh -R 8000:internal.webserver:80 clienta@publicserver Client B: ssh -R 8001:internal.webserver:80 clientb@publicserver Client C: ssh -R 8002:internal.webserver:80 clientc@publicserver Basically, what we are trying to do is bind each user with a port and not allow them to tunnel to any other ports. If we were using the forward tunneling feature of SSH with ssh -L, we could permit which port to be tunneled by using the permitopen=host:port configuration. However, there is no equivalent for reverse SSH tunnel. Is there a way of restricting reverse tunneling ports per user?

  Read the article

• XAMPP server giving 404 error when requested by ipv4 connection

  - by boyb

  This is in reference to a previous question that I asked and was answered by womble. http://serverfault.com/a/406280/127729 So, now we have the real DNS records, we can do some diagnosis. dig for both A and AAAA on akosiboybastos.broker.freenet6.net gives a valid response, with an appropriate address. Good. dig for both A and AAAA on bastosforum.strangled.net gives the same responses (with a CNAME response thrown in). Also good. This means that the problem is not DNS-related, as those records are in order. wget -6 bastosforum.strangled.net/ gives a 200 OK response. wget -4 bastosforum.strangled.net/ gives a 404 Not Found response. This means that your webserver is misconfigured so that it's not serving the response you desire on IPv4. Given that the initial DNS problem asked in this question has been solved, I would recommend posting a new question with relevant webserver-related configuration, if you can't determine the configuration error yourself. I am using XAMPP(latest version) running phpbb3.0.10 via ipv6 tunnel from freenet6 and my domain is akosiboybastos.broker.freenet6.com, nothing fancy with the installation just out of the box install(with a few cosmetic mod). Both ipv4 and ipv6 traffic can connect using that url, but when I try to put a CNAME record on my test domain which is bastosforum.strangled.net pointing it to akosiboybastos.broker.freenet6.com only ipv6 can connect. As suggested by womble, this is a misconfigured webserver. To be honest I don't know where to start checking on the server as it is fully working if you use the domain given by freenet6 (akosiboybastos.broker.freenet6.com), any info on how to go about this server issue is welcome as i'm really a noob when it comes to computers. regards boyb

  Read the article

• proxy setting through iphone sdk?

  - by senthilmuthu

  hi, My safari browser has been set through proxy user name and pass word,so when i communicate webserver through NSUrl , it returns the data inwhich they have mentioned that we cant reach webserver like that.how can i over come this problem?can i give give user name password for proxy through iphone sdk?is it possible?any help please?

  Read the article

• VirtualBox guest OS accessing local server on host OS.

  - by Maxim

  Hi, On my Ubuntu HOST I have my local webserver. I installed VirtualBox and Debian as a GUEST. I would like Debian guest to be able to hit my webserver running on my Ubuntu host (for example, I just type http://localhost:8080/ in the browser under Debian). How can this be done? Thanks in advance.

  Read the article

• setting through iphone sdk?

  - by senthilmuthu

  hi, My safari browser has been set through proxy user name and pass word,so when i communicate webserver through NSUrl , it returns the data inwhich they have mentioned that we cant reach webserver like that.how can i over come this problem?can i give give user name password for proxy through iphone sdk?is it possible?any help please?

  Read the article

• Configure Notepad++ DBGP plugin and XDebug for PHP

  - by Wasim

  I followed these steps: download x-debug*.dll to D:\Program Files\webserver\php\ext\php_xdebug.dll modify php.ini and insert following zend_extension_ts="D:\Program Files\webserver\php\ext\php_xdebug.dll" xdebug.remote_enable=1 xdebug.remote_handler=dbgp xdebug.remote_mode=req xdebug.idekey=default xdebug.remote_autostart=1 restart apache and XDebug is successfully installed. DBGP is installed successfully and configured with 127.0.0.1 but XDebugger is still not connecting/working with notepad++.

  Read the article

< Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >