Search Results

Search found 15439 results on 618 pages for 'wls configuration'.

Page 41/618 | < Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >

• Second network card configuration not working.

  - by Sebas

  I have 4 servers running Centos 5. All of them have two ethernet network cards. I have configured 192.168.1.x IP addresses on their eth0 card. They are all connected to the same switch using their eth0 card and they are all working. I have configured 10.72.11.x IP addresses on their eth1 card.They are all connected to the same switch - a different one from the switch used with eth0 card - using their eth1 card and they are NOT all working. Their configuration files is like: DEVICE=eth1 BOOTPROTO=static IPADDR=10.72.11.236 BROADCAST=10.72.11.191 NETMASK=255.255.255.192 NETWORK=10.72.11.128 HWADDR=84:2B:2B:55:4B:98 IPV6INIT=yes IPV6_AUTOCONF=yes ONBOOT=yes The interfase is starting and configured as I need. [root@sql1 network-scripts]# ifconfig eth0 Link encap:Ethernet HWaddr 84:2B:2B:55:4B:97 inet addr:192.168.1.105 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::862b:2bff:fe55:4b97/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2981 errors:0 dropped:0 overruns:0 frame:0 TX packets:319 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:386809 (377.7 KiB) TX bytes:66134 (64.5 KiB) Interrupt:36 Memory:da000000-da012800 eth1 Link encap:Ethernet HWaddr 84:2B:2B:55:4B:98 inet addr:10.72.11.236 Bcast:10.72.11.191 Mask:255.255.255.192 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interrupt:48 Memory:dc000000-dc012800 I also added a route-eth1 file that looks like: 10.0.0.0/8 via 10.72.11.254 Routing looks fine to me: [root@sql1 network-scripts]# netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 10.72.11.192 0.0.0.0 255.255.255.192 U 0 0 0 eth1 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 10.0.0.0 10.72.11.254 255.0.0.0 UG 0 0 0 eth1 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 But I cannot ping one server from the other. [root@sql1 network-scripts]# ping 10.72.11.235 PING 10.72.11.235 (10.72.11.235) 56(84) bytes of data. From 10.72.11.236 icmp_seq=1 Destination Host Unreachable From 10.72.11.236 icmp_seq=2 Destination Host Unreachable From 10.72.11.236 icmp_seq=3 Destination Host Unreachable From 10.72.11.236 icmp_seq=4 Destination Host Unreachable From 10.72.11.236 icmp_seq=5 Destination Host Unreachable From 10.72.11.236 icmp_seq=6 Destination Host Unreachable ^C --- 10.72.11.235 ping statistics --- 7 packets transmitted, 0 received, +6 errors, 100% packet loss, time 6033ms , pipe 3 What am I doing wrong?

  Read the article

• Reading web-service information from assembly app.config file

  - by Benjamin Ortuzar

  I have a plugin architecture solution written in .NET C# 3.5, where each plug-in is an assembly loaded by the main project. Each plug-in connects to a different web-service, so I would like to have the configuration of that plugin in its own plugin.dll.config file instead of having it in the app.config of the main project. I have been looking around and I saw that i could load from each class its own config file: // Get the application configuration file. System.Configuration.Configuration config = ConfigurationManager.OpenMappedExeConfiguration(fileMap,userLevel) I see how that would help me get the basic settings from the appSettings section, but I cant see a way to read the web-service information stored in the plugin.dll.config file. Any help on how to approach this situation is very welcome.

  Read the article

• Nginx common configuration that I might have missed

  - by ApPeL

  I recently moved from Apache Mod_wsgi to Nginx, and I have seen a major improvement on speed a lowering on memory usage and I am generally very happy with the it. I am not a server expert, so please be gentle. I am wondering if there are any small configuration that I might have missed, that will cause me some issues in the long run... Please see my nginx.conf file user nginx nginx; worker_processes 4; error_log /var/log/nginx/error_log info; events { worker_connections 1024; use epoll; } http { include /etc/nginx/mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] ' '"$request" $status $bytes_sent ' '"$http_referer" "$http_user_agent" ' '"$gzip_ratio"'; client_header_timeout 10m; client_body_timeout 10m; send_timeout 10m; connection_pool_size 256; client_header_buffer_size 1k; large_client_header_buffers 4 2k; request_pool_size 4k; gzip on; gzip_min_length 1100; gzip_buffers 4 8k; gzip_types text/plain; output_buffers 1 32k; postpone_output 1460; sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 75 20; ignore_invalid_headers on; index index.html; server { listen 80; server_name localhost; location /media/ { root /www/django_test1/myapp; # Notice this is the /media folder that we create above } location /mediaadmin/ { alias /opt/python2.6/lib/python2.6/site-packages/django/contrib/admin/media/; # Notice this is the /media folder that we create above } location / { # host and port to fastcgi server fastcgi_pass 127.0.0.1:8080; fastcgi_param SERVER_ADDR $server_addr; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_NAME $server_name; fastcgi_param SERVER_PROTOCOL $server_protocol; fastcgi_param PATH_INFO $fastcgi_script_name; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param QUERY_STRING $query_string; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_pass_header Authorization; fastcgi_intercept_errors off; client_max_body_size 100M; } access_log /var/log/nginx/localhost.access_log main; error_log /var/log/nginx/localhost.error_log; } }

  Read the article

• Accessing Custom Configurations in NUnit class

  - by Martin Ongtangco

  I'm really banging my head onto this one. I can't make the Custom Configuration to work with NUnit. It kept on failing to read the configuration file. I followed carefully this article: http://devlicio.us/blogs/derik_whittaker/archive/2006/11/13/app-config-and-custom-configuration-sections.aspx placed the references in the Unit test class App.Config, still everything failed. Is there some sort of a magic setting to do here?

  Read the article

• How do you manually insert options into boost.Program_options?

  - by windfinder

  I have an application that uses Boost.Program_options to store and manage its configuration options. We are currently moving away from configuration files and using database loaded configuration instead. I've written an API that reads configuration options from the database by hostname and instance name. (cool!) However, as far as I can see there is no way to manually insert these options into the boost Program_options. Has anyone used this before, any ideas? The docs from boost seem to indicate the only way to get stuff in that map is by the store function, which either reads from the command line or config file (not what I want). Basically looking for a way to manually insert the DB read values in to the map.

  Read the article

• Auto-Configuring SSIS Packages

  - by Davide Mauri

  SSIS Package Configurations are very useful to make packages flexible so that you can change objects properties at run-time and thus make the package configurable without having to open and edit it. In a complex scenario where you have dozen of packages (even in in the smallest BI project I worked on I had 50 packages), each package may have its own configuration needs. This means that each time you have to run the package you have to pass the correct Package Configuration. I usually use XML configuration files and I also force everyone that works with me to make sure that an object that is used in several packages has the same name in all package where it is used, in order to simplify configurations usage. Connection Managers are a good example of one of those objects. For example, all the packages that needs to access to the Data Warehouse database must have a Connection Manager named DWH. Basically we define a set of “global” objects so that we can have a configuration file for them, so that it can be used by all packages. If a package as some specific configuration needs, we create a specific – or “local” – XML configuration file or we set the value that needs to be configured at runtime using DTLoggedExec’s Package Parameters: http://dtloggedexec.davidemauri.it/Package%20Parameters.ashx Now, how we can improve this even more? I’d like to have a package that, when it’s run, automatically goes “somewhere” and search for global or local configuration, loads it and applies it to itself. That’s the basic idea of Auto-Configuring Packages. The “somewhere” is a SQL Server table, defined in this way In this table you’ll put the values that you want to be used at runtime by your package: The ConfigurationFilter column specify to which package that configuration line has to be applied. A package will use that line only if the value specified in the ConfigurationFilter column is equal to its name. In the above sample. only the package named “simple-package” will use the line number two. There is an exception here: the $$Global value indicate a configuration row that has to be applied to any package. With this simple behavior it’s possible to replicate the “global” and the “local” configuration approach I’ve described before. The ConfigurationValue contains the value you want to be applied at runtime and the PackagePath contains the object to which that value will be applied. The ConfiguredValueType column defined the data type of the value and the Checksum column is contains a calculated value that is simply the hash value of ConfigurationFilter plus PackagePath so that it can be used as a Primary Key to guarantee uniqueness of configuration rows. As you may have noticed the table is very similar to the table originally used by SSIS in order to put DTS Configuration into SQL Server tables: SQL Server SSIS Configuration Type: http://msdn.microsoft.com/en-us/library/ms141682.aspx Now, how it works? It’s very easy: you just have to call DTLoggedExec with the /AC option: DTLoggedExec.exe /FILE:”mypackage.dtsx” /AC:"localhost;ssis_auto_configuration;ssiscfg.configuration" the AC option expects a string with the following format: <database_server>;<database_name>;<table_name>; only Windows Authentication is supported. When DTLoggedExec finds an Auto-Configuration request, it injects a new connection manager in the loaded package. The injected connection manager is named $$DTLoggedExec_AutoConfigure and is used by the two SQL Server DTS Configuration ($$DTLoggedExec_Global and $$DTLoggedExec_Local) also injected by DTLoggedExec, used to load “local” and “global” configuration. Now, you may start to wonder why this approach cannot be used without having all this stuff going around, but just passing to a package always two XML DTS Configuration files, (to have to “local” and the “global” configurations) doing something like this: DTLoggedExec.exe /FILE:”mypackage.dtsx” /CONF:”global.dtsConfig” /CONF:”mypackage.dtsConfig” The problem is that this approach doesn’t work if you have, in one of the two configuration file, a value that has to be applied to an object that doesn’t exists in the loaded package. This situation will raise an error that will halt package execution. To solve this problem, you may want to create a configuration file for each package. Unfortunately this will make deployment and management harder, since you’ll have to deal with a great number of configuration files. The Auto-Configuration approach solve all these problems at once! We’re using it in a project where we have hundreds of packages and I can tell you that deployment of packages and their configuration for the pre-production and production environment has never been so easy! To use the Auto-Configuration option you have to download the latest DTLoggedExec release: http://dtloggedexec.codeplex.com/releases/view/62218 Feedback, as usual, are very welcome!

  Read the article

• WebLogic Server Weekly for March 26th, 2012: WLS 1211 Update, Java 7 Certification, Galleria, WebLogic for DBAs, REST and Enterprise Architecture, Singleton Services

  - by Steve Button

  WebLogic Server 12c Certified with Java 7 for Production Use WebLogic Server 12c (12.1.1) has been certified with JDK 7 for development usage since December and we have now completed JDK 7 certification for use with production systems. In doing so, we have updated the WebLogic Server 12c (12.1.1) distributions incorporating fixes associated with JDK 7 support as well as some bundled patches that address several issues that have been discovered since the initial release. These updated distributions are available for download from OTN and will be beneficial for all WebLogic Server 12c (12.1.1) users in general. What's New Release Notes Download Here! Updated Oracle WebLogic Server 12.1.1.0 distribution Never one to miss a trick, Markus Eisele was one of the first to notice the WebLogic Server 12c update and post a blog about it. Sources told me that as of Friday last week you have an updated version of WebLogic Server 12c on OTN. http://blog.eisele.net/2012/03/updated-oracle-weblogic-server-12110.html Using WebLogic Server 12c with Java 7 - Video To illustrate the use of Java 7 with WebLogic Server 12c, I put together a screen cam showing the creation of a domain using Java 7 and then build and deploy a simple web application that uses Java 7 syntax to show it working. Ireland OUG Presentation: WebLogic for DBAs Simon Haslam posted his slides from a presentation he gave Dublin on 21/3/12 at the OUG Ireland conference. In this presentation, he explains the core concepts and ideas behind WebLogic Server, walks through an installation and offers some tips and common gotcha's to avoid. Simon also covers some aspects of installing and use Enterprise Manager 12c. Note: I usually install the JVM and use the generic .jar installer rather than using an installer bundled with a JVM. http://www.slideshare.net/Veriton/weblogic-for-dbas-10h Slightly Retro: Jeff West on Enterprise Architecure and REST In this weeks flashback, we look at Jeff West's blog from early 2011 where he provides some thoughtful opinions on enterprise architecture and innovation, then jumps into his views on REST. After I progressed in my career and did more team-leading and architecture type roles I was ‘educated’ on what it meant to have Asynchronous and Long-Running processes as part of your Enterprise Application architecture. If I had a synchronous process then I needed a thread available to service the request and then provide the response. https://blogs.oracle.com/jeffwest/entry/weblogic_integration_wli_web_services_and_soap_and_rest_part_1 Starting Managed Servers without an Administration Server using Node Manager and WLST Blogger weblogic-tips shows how to start a managed server without going through the Administration Server, using the Node Manager and WLST. Connect WLST to a Node Manager by entering the nmConnect command. http://www.weblogic-tips.com/2012/02/18/starting-managed-servers-without-an-administration-server-using-node-manager-and-wlst/ Using WebLogic Server Singleton Services WebLogic Server has supported the notion of a Singleton Service for a number of releases, in which WebLogic Server will maintain a single instance of a configured singleton service on one managed server within a cluster. This blog demonstrates how the singleton service can be accessed and used from applications deployed on the cluster. http://buttso.blogspot.com.au/2012/03/weblogic-server-singleton-services.html

  Read the article

• OpenBSD configuration: Client unable to mount via NFS using Berkeley Automounter (amd)

  - by Rilindo

  What I am trying to do is to have my openBSD client (OpenBSD 4.9) auto mount a Linux NFS file system (Scientific Linux 6.1). So far, I am not sure if it is configured correctly. To get things out of the way, I am able to mount nfs manually: # mount_nfs -T -3 192.168.15.100:/exports /mnt # ls -la /mnt total 52 drwxr-xr-x 7 root wheel 4096 Oct 4 22:42 . drwxr-xr-x 16 root wheel 512 Nov 26 16:33 .. drwxrwxr-x 5 _sndio _sndio 4096 Oct 31 21:58 centos drwxr-xr-x 15 root wheel 4096 Nov 6 09:17 home drwxr-xr-x 5 root wheel 4096 Oct 31 21:27 sl drwxr-xr-x 3 root wheel 4096 Nov 19 16:02 sles drwxr-xr-x 17 503 503 4096 Nov 10 17:37 users # So connectivity is not an issue, as far as I can tell. As per man page, the following is configured in /etc/amd/auto.home: /defaults type:=nfs;sublink:=${key};opts:=rw,soft,intr,vers=3,proto=tcp * rhost:=192.168.15.100;rfs:=/exports In turn, /etc/amd/master is configured as such: # cat /etc/amd/master /exports amd.home Upon reboot, I can it see mount, but curiously enough, instead of the hostname: amd:24490 0 0 0 100% /exports From what I understand, amd acts a little different from FreeBSD. Still, I tried to see if I it can automount. Nope: ksh: cd: /exports/users - Resource temporarily unavailable # cd /exports/192.168.15.100/host/users ksh: cd: /exports/192.168.15.100/host/users - Resource temporarily unavailable A search in google doesn't help too much - it seems that automounting NFS with OpenBSD is not something that is usually done. Other than this, information is fairly sparse. I can, of course, always mount is permanently, but I tend to be a bit anal on convention, so no for now. :) Some direction would be appreciation. (And oh, in case you are a wondering, I tried FreeBSD way of using amd and that hasn't worked out - although I wouldn't mind an explanation of the difference between how FreeBSD implements and how OpenBSD implements it) UPDATE: After re-writing the map file several times, I got as far as actually communicating with the NFS server with this configuration: /defaults type:=nfs;rhost:=kerberos.monzell.com;rfs:=/exports;\ sublink:=${key};opts:=rw,nodev,nosuid,soft,intr,tcp,resvport * ${host}==${rhost};type:=nfs;fs:=${rfs};opts:=rw,nodev,nosuid,soft,intr,tcp,resvport However, for some reason, it seems that amd will only default to NFS version 2 over udp: # tcpdump dst kerberos tcpdump: listening on pcn0, link-type EN10MB tcpdump: WARNING: compensating for unaligned libpcap packets 20:38:28.558385 openbsd.monzell.com.856 > kerberos.monzell.com.sunrpc: udp 100 20:38:28.559154 openbsd.monzell.com.856 > kerberos.monzell.com.892: udp 96 20:38:30.592761 openbsd.monzell.com.856 > kerberos.monzell.com.nfsd: xid 0x22000000 (NFSv2) 40 null 20:38:33.558107 arp reply openbsd.monzell.com is-at 52:54:00:52:8f:66 I tried various options of forcing it to try to mount as nfsv3 such as: /defaults type:=nfs;rhost:=kerberos.monzell.com;rfs:=/exports;\ sublink:=${key};opts:=rw,nodev,nosuid,soft,intr,vers=3,proto=tcp,resvport * ${host}==${rhost};type:=nfs;fs:=${rfs};opts:=rw,nodev,nosuid,soft,intr,vers=3,proto=tcp,resvport or: /defaults type:=nfs;rhost:=kerberos.monzell.com;rfs:=/exports;\ sublink:=${key};opts:=rw,nodev,nosuid,soft,intr,vers=-3,proto=tcp,resvport * ${host}==${rhost};type:=nfs;fs:=${rfs};opts:=rw,nodev,nosuid,soft,intr,vers=3,proto=tcp,resvport Nothing yet still. Curious enough, OpenBSD mounts defaults to version 3, so I am not sure why it would start with version in amd. What would be the correct options to pass?

  Read the article

• apache+mod_wsgi configuration for django project(s) on a quad core

  - by Stefano

  I've been experiment quite some time with a "typical" django setting upon nginx+apache2+mod_wsgi+memcached(+postgresql) (reading the doc and some questions on SO and SF, see comments) Since I'm still unsatisfied with the behavior (definitely because of some bad misconfiguration on my part) I would like to know what a good configuration would look like with these hypotesis: Quad-Core Xeon 2.8GHz 8 gigs memory several django projects (anything special related to this?) These are excerpts form my current confs: apache2 SetEnv VHOST null #WSGIPythonOptimize 2 <VirtualHost *:8082> ServerName subdomain.domain.com ServerAlias www.domain.com SetEnv VHOST subdomain.domain AddDefaultCharset UTF-8 ServerSignature Off LogFormat "%{X-Real-IP}i %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-agent}i\"" custom ErrorLog /home/project1/var/logs/apache_error.log CustomLog /home/project1/var/logs/apache_access.log custom AllowEncodedSlashes On WSGIDaemonProcess subdomain.domain user=www-data group=www-data threads=25 WSGIScriptAlias / /home/project1/project/wsgi.py WSGIProcessGroup %{ENV:VHOST} </VirtualHost> wsgi.py import os import sys # setting all the right paths.... _realpath = os.path.realpath(os.path.dirname(__file__)) _public_html = os.path.normpath(os.path.join(_realpath, '../')) sys.path.append(_realpath) sys.path.append(os.path.normpath(os.path.join(_realpath, 'apps'))) sys.path.append(os.path.normpath(_public_html)) sys.path.append(os.path.normpath(os.path.join(_public_html, 'libs'))) sys.path.append(os.path.normpath(os.path.join(_public_html, 'django'))) os.environ['DJANGO_SETTINGS_MODULE'] = 'settings' import django.core.handlers.wsgi _application = django.core.handlers.wsgi.WSGIHandler() def application(environ, start_response): """ Launches django passing over some environment (domain name) settings """ application_group = environ['mod_wsgi.application_group'] """ wsgi application group is required. It's also used to generate the HOST.DOMAIN.TLD:PORT parameters to pass over """ assert application_group fields = application_group.replace('|', '').split(':') server_name = fields[0] os.environ['WSGI_APPLICATION_GROUP'] = application_group os.environ['WSGI_SERVER_NAME'] = server_name if len(fields) > 1 : os.environ['WSGI_PORT'] = fields[1] splitted = server_name.rsplit('.', 2) assert splitted >= 2 splited.reverse() if len(splitted) > 0 : os.environ['WSGI_TLD'] = splitted[0] if len(splitted) > 1 : os.environ['WSGI_DOMAIN'] = splitted[1] if len(splitted) > 2 : os.environ['WSGI_HOST'] = splitted[2] return _application(environ, start_response)` folder structure in case it matters (slightly shortened actually) /home/www-data/projectN/var/logs /project (contains manage.py, wsgi.py, settings.py) /project/apps (all the project ups are here) /django /libs Please forgive me in advance if I overlooked something obvious. My main question is about the apache2 wsgi settings. Are those fine? Is 25 threads an /ok/ number with a quad core for one only django project? Is it still ok with several django projects on different virtual hosts? Should I specify 'process'? Any other directive which I should add? Is there anything really bad in the wsgi.py file? I've been reading about potential issues with the standard wsgi.py file, should I switch to that? Or.. should this conf just be running fine, and I should look for issues somewhere else? So, what do I mean by "unsatisfied": well, I often get quite high CPU WAIT; but what is worse, is that relatively often apache2 gets stuck. It just does not answer anymore, and has to be restarted. I have setup a monit to take care of that, but it ain't a real solution. I have been wondering if it's an issue with the database access (postgresql) under heavy load, but even if it was, why would the apache2 processes get stuck? Beside these two issues, performance is overall great. I even tried New Relic and got very good average results.

  Read the article

• DHCP and DNS services configuration for VOIP system, windows domain, etc

  - by Stemen

  My company has numerous physical offices (for purposes of this discussion, 15 buildings). Some of them are well-connected to our primary data center via fiber. Others will be connected to the data center by P2P T1. We are in the beginning stages of implementing an Avaya VOIP telephone system, and we will be replacing a significant portion of our network infrastructure in the process. In tandem with the phone system implementation, we are going to be re-addressing some of our networks, and consolidating most of our Windows domains into one (not all domains, just most). We currently have quite a few Windows domains, and they of course each have their own DNS zones. A few of those networks currently use DHCP, but the majority use static IP assignments for every device. I'm tired of managing static assignments -- I want to use DHCP configuration on everything except servers. Printers and etc will have DHCP reservations. The new IP phones will need to get IP addresses from DHCP, though they need to be in a separate VLAN from the computers/printers/etc. The computers and printers need to be registered in DNS. That's currently handled by the Windows DHCP servers on each of the respective domains. We need to place a priority on DHCP and DNS being available on a per-site basis (in case something were to interrupt the WAN connection) for computers and (primarily) phones. Smaller locations (which will have IP phones but not be a member of any Windows domain) will not have any Windows DNS/DHCP server(s) available. We also are looking for the easiest way to replace a part if it were to fail. That is to say, if a server/appliance/router hosting DHCP were to crash hard, and we couldn't extremely quickly recover the DHCP reservations and leases (and subsequently restore them onto a cold spare), we anticipate that bad things could happen. What is the best idea for how to re-implement DNS and DHCP keeping all of the above in mind? Some thoughts that have been raised (by myself or my coworkers): Use Windows DNS and DHCP servers, where they exist, and use IP helpers to route DHCP requests to some other Windows server if necessary. May not be acceptable if the WAN goes down and clients don't get a DHCP response. Use Windows DNS (everywhere, over WAN in some cases) and a mix of Windows DHCP and DHCP provided by Cisco routers. Every site would be covered for DHCP, but from what I've read, Cisco routers can't handle dynamic registration of DHCP clients to Windows DNS servers, which might create a problem where Cisco routers are used for DHCP. Use Windows DNS (everywhere, over WAN in some cases) and a mix of Windows DHCP and DHCP provided by some service running on an extremely low-price linux server. Is there any such software that would allow DHCP leases granted by these linux boxes to be dynamically registered on the Windows DNS servers? Come up with a Linux solution for both DNS and DHCP, and deploy low-price linux servers to every site. Requirements would be that the DNS zone be multi-master (like Windows DNS integrated with Active Directory), that DHCP be able to make dynamic DNS registrations in that zone, for every lease (where a hostname is provided and is thus possible), and that multiple servers be either authoritative for the same DHCP scope or at least receiving a real-time copy / replication / sync of the leases table so that if one server dies, we still know which MAC has what address. Purchase dedicated DNS/DHCP appliances, deploying to all sites. From what I read/see, this solves all of our technical problems. Then come the financial problems... I don't have a ton of money to spend on this. Or, some other solution that we've thus far overlooked and will consider upon recommendation. Can Cisco routers or Windows servers sync DHCP lease tables so that multiple servers can be authoritative (or active/passive for all I care) for the same scope, in case one of the partners were to fail? I've read online (repeatedly) that ISC's DHCP is able to maintain the same lease table across multiple servers, in order to solve this problem. Does anyone have any experience or advice to regarding that?

  Read the article

• OpenBSD configuration: Client unable to automount via NFS using amd

  - by Rilindo

  What I am trying to do is to have my openBSD client (OpenBSD 4.9) auto mount a Linux NFS file system (Scientific Linux 6.1). So far, I am not sure if it is configured correctly. To get things out of the way, I am able to mount nfs manually: # mount_nfs -T -3 192.168.15.100:/exports /mnt # ls -la /mnt total 52 drwxr-xr-x 7 root wheel 4096 Oct 4 22:42 . drwxr-xr-x 16 root wheel 512 Nov 26 16:33 .. drwxrwxr-x 5 _sndio _sndio 4096 Oct 31 21:58 centos drwxr-xr-x 15 root wheel 4096 Nov 6 09:17 home drwxr-xr-x 5 root wheel 4096 Oct 31 21:27 sl drwxr-xr-x 3 root wheel 4096 Nov 19 16:02 sles drwxr-xr-x 17 503 503 4096 Nov 10 17:37 users # So connectivity is not an issue, as far as I can tell. As per man page, the following is configured in /etc/amd/auto.home: /defaults type:=nfs;sublink:=${key};opts:=rw,soft,intr,vers=3,proto=tcp * rhost:=192.168.15.100;rfs:=/exports In turn, /etc/amd/master is configured as such: # cat /etc/amd/master /exports amd.home Upon reboot, I can it see mount, but curiously enough, instead of the hostname: amd:24490 0 0 0 100% /exports From what I understand, amd acts a little different from FreeBSD. Still, I tried to see if I it can automount. Nope: ksh: cd: /exports/users - Resource temporarily unavailable # cd /exports/192.168.15.100/host/users ksh: cd: /exports/192.168.15.100/host/users - Resource temporarily unavailable A search in google doesn't help too much - it seems that automounting NFS with OpenBSD is not something that is usually done. Other than this, information is fairly sparse. I can, of course, always mount is permanently, but I tend to be a bit anal on convention, so no for now. :) Some direction would be appreciation. (And oh, in case you are a wondering, I tried FreeBSD way of using amd and that hasn't worked out - although I wouldn't mind an explanation of the difference between how FreeBSD implements and how OpenBSD implements it) UPDATE: After re-writing the map file several times, I got as far as actually communicating with the NFS server with this configuration: /defaults type:=nfs;rhost:=kerberos.monzell.com;rfs:=/exports;\ sublink:=${key};opts:=rw,nodev,nosuid,soft,intr,tcp,resvport * ${host}==${rhost};type:=nfs;fs:=${rfs};opts:=rw,nodev,nosuid,soft,intr,tcp,resvport However, for some reason, it seems that amd will only default to NFS version 2 over udp: # tcpdump dst kerberos tcpdump: listening on pcn0, link-type EN10MB tcpdump: WARNING: compensating for unaligned libpcap packets 20:38:28.558385 openbsd.monzell.com.856 > kerberos.monzell.com.sunrpc: udp 100 20:38:28.559154 openbsd.monzell.com.856 > kerberos.monzell.com.892: udp 96 20:38:30.592761 openbsd.monzell.com.856 > kerberos.monzell.com.nfsd: xid 0x22000000 (NFSv2) 40 null 20:38:33.558107 arp reply openbsd.monzell.com is-at 52:54:00:52:8f:66 I tried various options of forcing it to try to mount as nfsv3 such as: /defaults type:=nfs;rhost:=kerberos.monzell.com;rfs:=/exports;\ sublink:=${key};opts:=rw,nodev,nosuid,soft,intr,vers=3,proto=tcp,resvport * ${host}==${rhost};type:=nfs;fs:=${rfs};opts:=rw,nodev,nosuid,soft,intr,vers=3,proto=tcp,resvport or: /defaults type:=nfs;rhost:=kerberos.monzell.com;rfs:=/exports;\ sublink:=${key};opts:=rw,nodev,nosuid,soft,intr,vers=-3,proto=tcp,resvport * ${host}==${rhost};type:=nfs;fs:=${rfs};opts:=rw,nodev,nosuid,soft,intr,vers=3,proto=tcp,resvport Nothing yet still. Curious enough, OpenBSD mounts defaults to version 3, so I am not sure why it would start with version in amd. What would be the correct options to pass?

  Read the article

• what's wrong with my Ubuntu 11.10 bind9 configuration?

  - by John Bowlinger

  I've followed several tutorials on installing your own nameservers and I'm pretty much at my wit's end, because I cannot get them to resolve. Note, the actual domain and ip address has been changed for privacy to example.com and 192.168.0.1. My named.conf.local file: zone "example.com" { type master; file "/var/cache/bind/example.com.db"; }; zone "0.168.192.in_addr.arpa" { type master; file "/var/cache/bind/192.168.0.db"; }; My named.conf.options file: options { forwarders { 192.168.0.1; }; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; }; My resolv.conf file: search example.com. nameserver 192.168.0.1 My Forward DNS file: ORIGIN example.com. $TTL 86400 @ IN SOA ns1.example.com. root.example.com. ( 2012083101 ; Serial 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 3600 ) ; Negative Cache TTL example.com. NS ns1.example.com. example.com. NS ns2.example.com. example.com. MX 10 mail.example.com. @ IN A 192.168.0.1 ns1.example.com IN A 192.168.0.1 ns2.example.com IN A 192.168.0.2 mail IN A 192.168.0.1 server1 IN A 192.168.0.1 gateway IN CNAME ns1.example.com. headoffice IN CNAME server1.example.com. smtp IN CNAME mail.example.com. pop IN CNAME mail.example.com. imap IN CNAME mail.example.com. www IN CNAME server1.example.com. sql IN CNAME server1.example.com. And my reverse DNS: $ORIGIN 0.168.192.in-addr.arpa. $TTL 86400 @ IN SOA ns1.example.com. root.example.com. ( 2009013101 ; Serial 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 3600 ) ; Negative Cache TTL 1 PTR mail.example.com. 1 PTR server1.example.com. 2 PTR ns1.example.com. Yet, when I restart bind9 and do: host ns1.example.com localhost I get: Using domain server: Name: localhost Address: 127.0.0.1#53 Aliases: Host ns1.example.com.example.com not found: 2(SERVFAIL) Similarly, for: host 192.168.0.1 localhost I get: ;; connection timed out; no servers could be reached Anybody know what's going on? Btw, my domain name "www.example.com" that I've used in this question is being forwarded to my ISP's nameservers. Would that affect my bind9 configuration? I want to learn how to do set up nameservers on my own for learning, so that is why I'm going through all this trouble.

  Read the article

• MPLS basic configuration

  - by Vineet Menon

  I want to test out MPLS VPN in my lab. I have 3 routers. 2 PEs and 1P router, all cisco 2921. Something like this, ----- ---- ----- | PE1 |.1____192.168.1.0____.2| P |.2____192.168.2.0____.1| PE2 | | | | | | | ----- ---- ----- lo0:10.1.1.1 lo0:10.1.1.2 lo0:10.1.1.3 Here's the configuration file for each of them, PE1 router hostname PE1 ! no ipv6 cef ip source-route ip cef ! ! ! ip vrf cust1 rd 100:100 route-target export 100:100 route-target import 100:100 ! ! interface Loopback0 ip address 10.1.1.1 255.255.255.255 ! interface GigabitEthernet0/0 ip address 192.168.1.1 255.255.255.0 duplex auto speed auto ! interface GigabitEthernet0/1 ip vrf forwarding cust1 ip address 172.16.1.1 255.255.255.0 duplex auto speed auto ! router ospf 1 network 10.1.1.1 0.0.0.0 area 0 network 192.168.1.0 0.0.0.255 area 0 ! router bgp 100 bgp log-neighbor-changes neighbor 10.1.1.3 remote-as 100 neighbor 10.1.1.3 update-source Loopback0 neighbor 172.16.1.2 remote-as 65001 ! address-family vpnv4 neighbor 10.1.1.3 activate neighbor 10.1.1.3 send-community extended exit-address-family For P router: hostname P ! no ipv6 cef ip source-route ip cef ! interface Loopback0 ip address 10.1.1.2 255.255.255.255 ! interface GigabitEthernet0/1 ip address 192.168.1.2 255.255.255.0 duplex auto speed auto ! interface GigabitEthernet0/2 ip address 192.168.2.2 255.255.255.0 duplex auto speed auto ! router ospf 1 network 10.1.1.2 0.0.0.0 area 0 network 192.168.1.0 0.0.0.255 area 0 network 192.168.2.0 0.0.0.255 area 0 ! For PE2 router: ! hostname PE2 ! no ipv6 cef ip source-route ip cef ! ! ! ip vrf cust1 rd 100:100 route-target export 100:100 route-target import 100:100 ! ! ! interface Loopback0 ip address 10.1.1.3 255.255.255.0 ! interface GigabitEthernet0/0 ip address 192.168.2.1 255.255.255.0 duplex auto speed auto ! interface GigabitEthernet0/1 ip vrf forwarding cust1 ip address 172.16.2.1 255.255.255.0 duplex auto speed auto ! router ospf 1 network 10.1.1.3 0.0.0.0 area 0 network 192.168.2.0 0.0.0.255 area 0 ! router bgp 100 bgp log-neighbor-changes neighbor 10.1.1.1 remote-as 100 neighbor 10.1.1.1 update-source Loopback0 neighbor 172.16.2.2 remote-as 65001 ! address-family vpnv4 neighbor 10.1.1.1 activate neighbor 10.1.1.1 send-community extended exit-address-family ! I am following this article form cisco. But things are not working properly. Any help would be appreciated.

  Read the article

• Plugin execution not covered by lifecycle configuration: org.codehaus.mojo:aspectj-maven-plugin:1.0

  - by alexm

  I switched from q4e Helios to Indigo m2e plugin and my Maven 2 project no longer works. I had a ROO-generated Spring MVC project. This is what I get: Plugin execution not covered by lifecycle configuration: org.codehaus.mojo:aspectj-maven-plugin:1.0:test-compile (execution: default, phase: process-test-sources) Plugin execution not covered by lifecycle configuration: org.codehaus.mojo:aspectj-maven-plugin:1.0:compile (execution: default, phase: process-sources) Any insight is greatly appreciated. Thank you.

  Read the article

• iPhone configuration file

  - by Pirks

  I try to create iPhone configuration file via c# script as proposed in "Enterprise deployment Guide" of Apple and faced the following problem : iPCU.exe TestScript.cs // This command should create the profile but he not . He just run iPhone configuration //utility. TestScrip.cs consist example from Apple's pdf. Maybe somebody know the way that really work ?

  Read the article

• .Net framework 2.0 Configuration Tool

  - by Cédric Boivin

  I recently installed windows 7, visual studio 2008, and .net framework 3.5. With these installed, I was unable to find the .net framework configuration tool. It should be located in %windir%\Microsoft.net\framework\v2.0.507727\ with the file name mscorcfg.msc The only place I found something similar is in %windir%\Microsoft.net\framework\v1.0.3705 where there are files named mscormmc.cfg and mscormmc.dll Any idea where to get the configuration tool?

  Read the article

• Visual Studio Macro To Switch Solution Configuration

  - by Eddie Parker

  I'm trying to write a macro that toggles between release/debug solution configurations in Visual Studio. It appears I can switch the configuration by using 'DTE.ExecuteCommand("Build.SolutionConfigurations", "Debug")'. Is there a way I can 'read' the value? Or is there a way I can use macros to 'focus' on the solution configuration UI element?

  Read the article

• Serverside configuration constants in GWT

  - by Claus Jørgensen

  Hi I need some configuration files, that can be changed without recompiling the project in my GWT application. However, the GWT i18n doesn't allow to be used serverside. So what's the solution for getting configuration constants to be used serverside? Thanks.

  Read the article

• End user browser and OS configuration

  - by Joshua

  Sometimes in case of a bug in our code, we usually ask the end user to provide the browser configuration and OS configuration to isolate the issue. How can we get this information in case of a problem while the end users are accessing a web application.

  Read the article

• where should i put the configuration files in a webservice

  - by KItis

  Could some one help me on this problem. i have webservice , which reads data from configuration files. When i run this webservice from eclipse , i give absolute the path for these webservices of these configuration files , but when i shift the webservice in to server and run, it can not read the config file. so how can i solve this problem. is there a relative path that webservice can understand during run time.

  Read the article

• JBoss Application Server Log Configuration

  - by Anand

  Hi, Is there any configuration for JBoss Application Server's Log configuration where in the logs get deleted automatically if the log size exceeds some threshold or if it is older than a certain date ?

  Read the article

• Lighttpd check request headers in configuration

  - by Mike Hayes

  Hi I was wondering if it was possible in the configuration of Lighttpd to read request headers, I've searched and searched.. apparently it's not possible. For example, conditional configuration based upon IP address: $HTTP["remoteip"] == "0.0.0.0" { // Do something } Is there something similar to check headers, for example: $HTTP["X-Some-Header"] == "Value" { // Do something } I'm thinking there isn't but thought I would post here as a last resort. Google didn't help much, and Lighttpd documentation would suggest this is not possible. Thanks Mike

  Read the article

• Debugging TestNG configuration failures

  - by Ula Karzelek

  I'm running testng from ant. I'm using my own test listeners. I'm refactoring the code and once a while I got [testng] Total tests run: 7, Failures: 0, Skips: 7 [testng] Configuration Failures: 1, Skips: 2 What will be the best approach to fix configuration failures?

  Read the article

• How to get configuration for WCF Service

  - by klashar

  I want to check whether the endpoint is defined in the configuration before I'll try to create it System.ServiceModel.ClientBase<T> sourceClient = new System.ServiceModel.ClientBase<T>(EndpointName, new EndpointAddress(discoveryUri)); To check it I need get a configuration but how can I define whether I need to use WebConfigurationManager or ConfigurationManager. Is there any way to define where a WCF service is hosted?

  Read the article

• Best way to store configuration settings outside of web.config

  - by Wil

  I'm starting to consider creating a class library that I want to make generic so others can use it. While planning it out, I came to thinking about the various configuration settings that I would need. Since the idea is to make it open/shared, I wanted to make things as easy on the end user as possible. What's the best way to setup configuration settings without making use of web.config/app.config?

  Read the article

< Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >