Search Results

Search found 1084 results on 44 pages for 'yannick richard'.

Page 41/44 | < Previous Page | 37 38 39 40 41 42 43 44  | Next Page >

  • What should I encrypt in Debian during install?

    - by ianfuture
    I have seen various guides and recommendations on web about how best to do this but nothing that clearly explains the best way and why. So I understand there is a need for part of Debian during install to be un-encrypted on its own partition to allow it to boot. Most info I have seen is call this /boot and set the boot flag. Next I believe the best approach is to create another partition out of all the rest of the disk space, encrypt this, then on top of that create a LVM and then within the LVM create my various partitions , name them , select size, and file system type. Can I include /swap in the encrypted LVM part ? Is this approach sound? If so what are the partitions I should use (this is going to be a minimal server install with a view to install as and when what I need for a dev server)? Finally how does the installer know what to put in each partition I define ? I appreciate there are more than one question but any help and suggestions would be appreciated. If further clarification is needed please mention in the comments . EDIT : 16/3/2010 After Richard Holloways reply I thought it relevant to add this info: The reasons why I want to do this are to explore maximising security on any server install and set up, due to interest in the area of Computer Security and Forensics. Also I am trying to peform the task as if it being performed in an enterprise situation. On a technical matter, once set up and configured with minimal packages and ssh this server will not physically be easy to access so I will only be entering via ssh. (Yes I know why encrypt something no one will ever be able to get their hands on? Because I can and I want to is the simple answer, but see above too).

    Read the article

  • Clean Code Developer & Certification in IT - MSCC 21.09.2013

    It was a very busy weekend this time, and quite some hectic to organise the second meetup on a Saturday for the Mauritius Software Craftsmanship Community (MSCC) but it was absolutely fun. Following, I'm writing a brief summary about the topics we spoke about and the new impulses I got. "What a meetup... I was positively impressed. At the beginning I thought that noone would actually show up but then by the time the room got filled. Lots of conversation, great dialogues and fantastic networking between fresh students, experienced students, experienced employees, and self-employed attendees. That's what community is all about!" Above quote was my first reaction shortly after the gathering. And despite being busy during the weekend and yesterday, I took my time to reflect a little bit on things happened and statements made before writing it here on my blog. Additionally, I was also very curious about possible reactions and blogs from other attendees. Reactions from other craftsmen Let me quickly give you some links and quotes from others first... "Like Jochen posted on facebook, that was indeed a 5+ hours marathon (maybe 4 hours for me but still) … Wohoo! We’re indeed a bunch of crazy geeks who did not realise how time flew as we dived into the myriad discussions that sprouted. Yet in the end everyone was happy (:" -- Ish on MSCC meetup - The marathon (: "And the 4hours spent @ Talking drums bore its fruit..I was doing something I never did before....reading the borrowed book while walking....and though I was not that familiar with things mentionned in the book...I was skimming,scanning & flipping...reading titles...short paragraphs...and I skipped pages till I reached home." -- Yannick on Mauritius Software Craftsmanship 1st Meet-up "Hi Developers, Just wanted to share with you the meetups i attended last Saturday - [...] - The second meetup is the one hosted by Jochen Kirstätter, the MSCC, where the attendees were Craftsman, no woman, this time - all sharing the same passion of being a developer - even though it is on different platforms(Windows - Windows Phone - Linux - Adobe(yes a designer) - .Net) - but we manage to sit at the same table - sharing developer views and experience in the corporate world - also talking about good practice when coding( where Jochen initiated a discussion on Clean Coding ) i could not stay till the end - but from what i have heard - the longer you stay the more fun you have till 1600. Developers in the Facebook grouping i invite you to stay tuned about the various developer communities popping up - where you can come to share and learn good practices, develop the entrepreneurial spirit, and learn and share your passion about technologies" -- Arnaud on Facebook More feedback has been posted on the event directly. So, should I really write more? Wouldn't that spoil the impressions? Starting the day with a surprise Indeed, I was very pleased to stumble over the existence of Mobile Monday Mauritius on LinkedIn, an association about any kind of mobile app development, mobile gadgets and latest smartphones on the market. Despite the Monday in their name they had scheduled their recent meeting on Saturday between 10:00 and 12:00hrs. Wow, what a coincidence! Let's grap the bull by its horns and pay them an introductory visit. As they chose the Ebene Accelerator at the Orange Tower in Ebene it was a no-brainer to leave home a bit earlier and stop by. It was quite an experience and fun to talk to the geeks over there. Really looking forward to organise something together.... Arriving at the venue As the children got a bit uneasy at the MoMo gathering and I didn't want to disturb them too much, we arrived early at Bagatelle. Well, no problems as we went for a decent breakfast at Food Lover's Market. Shortly afterwards we went to our venue location, Talking Drums, and prepared the room for the meeting. We only had to take off a repro-painting of the wall in order to have a decent area for the projector. All went very smooth and my two little ones were of great help. Just in time, our first craftsman Avinash arrived on the spot. And then the waiting started... Luckily, not too long. Bit by bit more and more IT people came to join our meeting. Meanwhile, I used the time to give a brief introduction about the MSCC in general, what we are (hm, maybe I am) trying to achieve and that the recent phase is completely focused on creating more awareness that a community like the MSCC is active here in Mauritius. As soon as we reached some 'critical mass' of about ten people I asked everyone for a short introduction and bio, just in case... Conversation between participants started to kick in and we were actually more networking than having a focus on our topics of the day. Quick updates on latest news and development around the MSCC Finally, Clean Code Developer No matter how the position is actually called, whether it is Software Engineer, Software Developer, Programmer, Architect, or Craftsman, anyone working in IT is facing almost the same obstacles. As for the process of writing software applications there are re-occurring patterns and principles combined with some common exercise and best practices on how to resolve them. Initiated by the must-read book 'Clean Code' by Robert C. Martin (aka Uncle Bob) the concept of the Clean Code Developer (CCD) was born already some years ago. CCD is much likely to traditional martial arts where you create awareness of certain principles and learn how to apply practices to improve your style. The CCD initiative recommends to indicate your level of knowledge and experience with coloured wrist bands - equivalent to the belt colours - for various reasons. Frankly speaking, I think that the biggest advantage here is provided by the obvious recognition of conceptual understanding. For example, take the situation of a team meeting... A member with a higher grade in CCD, say Green grade, sees that there are mainly Red grades to talk to, and adjusts her way of communication to their level of understanding. The choice of words might change as certain elements of CCD are not yet familiar to all team members. So instead of talking in an abstract way which only Green grades could follow the whole scenario comes down to Red grade level. Different story, better results... Similar to learning martial arts, we only covered two grades during this occasion - black and red. Most interestingly, there was quite some positive feedback and lots of questions about the principles and practices of the red grade. And we gathered real-world examples from various craftsman and discussed them. Following the Clean Code Developer Red Grade and some annotations from our meetup: CCD Red Grade - Principles Don't Repeat Yourself - DRY Keep It Simple, Stupid (and Short) - KISS Beware of Optimisations! Favour Composition over Inheritance - FCoI Interestingly most of the attendees already heard about those key words but couldn't really classify or categorize them. It's very similar to a situation in which you do not the particular for a thing and have to describe it to others... until someone tells you the actual name and suddenly all is very simple. CCD Red Grade - Practices Follow the Boy Scouts Rule Root Cause Analysis - RCA Use a Version Control System Apply Simple Refactoring Pattern Reflect Daily Introduction to the principles and practices of Clean Code Developer - here: Red Grade As for the various ToDo's we commonly agreed that the Boy Scout Rule clearly is not limited to software development or IT administration but applies to daily life in general. Same for the root cause analysis, btw. We really had good stories with surprisingly endings and conclusions. A quick check about who is using a version control system brought more drive into the conversation. Not only that we had people that aren't using any VCS at all, we also had the 'classic' approach of backup folders and naming conventions as well as the VCS 'junkie' that has to use multiple systems at a time. Just for the records: Git and GitHub seem to be in favour of some of the attendees. Regarding the daily reflection at the end of the day we came up with an easy solution: Wrap it up as a blog entry! Certifications in IT This is kind of a controversy in IT in general. Is it interesting to go for certifications or are they completely obsolete? What are the possibilities to get certified? What are the options we have in Mauritius? How would certificates stand compared to other educational tracks like Computer Science or Web Design. The ratio between craftsmen with certifications like MCP, MSTS, CCNA or LPI versus the ones without wasn't in favour for the first group but there was a high interest in the topic itself and some were really surprised to hear that exam preparations are completely free available online including temporarily voucher codes for either discounts or completely free exams. Furthermore, we discussed possible options on forming so-called study groups on a specific certificates and organising more frequent meetups in order to learn together. Taking into consideration that we have sponsored access to the video course material of Pluralsight (and now PeepCode as well as TrainSignal), we might give it a try by the end of the year. Current favourites are LPIC Level 1 and one of the Microsoft exams 40-78x. Feedback and ideas for the MSCC The closing conversations and discussions about how the MSCC is recently doing, what are the possibilities and what's (hopefully) going to happen in the future were really fertile and I made a couple of mental bullet points which I'm looking forward to tackle down together with orher craftsmen. Eventually, it might be a good option to elaborate on some issues during our weekly Code & Coffee sessions one Wednesday morning. Active discussion on various IT topics like certifications (LPI, MCP, CCNA, etc) and sharing experience Finally, we made it till the end of the planned time. Well, actually the talk was still on and we continued even after 16:00hrs. Unfortunately, we (the children and I) had to leave for evening activities. My resume of the day... It was great to have 15 craftsmen in one room. There are hundreds of IT geeks out there in Mauritius, and as Mauritius Software Craftsmanship Community we still have a lot of work to do to pass on the message to some more key players and companies. Currently, it seems that we are able to attract a good number of students in Computer Science... but we have a lot more to offer, even or especially for IT people on the job. I'm already looking forward to our next Saturday meetup in the near future. PS: Meetup pictures are courtesy of Nirvan Pagooah. Thanks for sharing...

    Read the article

  • Clean Code Development & Flexible work environment - MSCC 26.10.2013

    Finally, some spare time to summarize my impressions and experiences of the recent meetup of Mauritius Software Craftsmanship Community. I already posted my comment on the event and on our social media networks: Professional - It's getting better with our meetups and I really appreciated that 'seniors' and 'juniors' were present today. Despite running a little bit out of time it was really great to see more students coming to the gathering. This time we changed location for our Saturday meetup and it worked out very well. A big thank you to Ebene Accelerator, namely Mrs Poonum, for the ability to use their meeting rooms for our community get-together. Already some weeks ago I had a very pleasant conversation with her about the MSCC aims, 'mission' and how we organise things. Additionally, I think that an environment like the Ebene Accelerator is a good choice as it acts as an incubator for young developers and start-ups. Reactions from other craftsmen Before I put my thoughts about our recent meeting down, I'd like to mention and cross-link to some of the other craftsmen that were present: "MSCC meet up is a massive knowledge gaining strategies for students, future entrepreneurs, or for geeks all around. Knowledge sharing becomes a fun. For those who have not been able to made it do subscribe on our MSCC meet up group at meetup.com." -- Nitin on Learning is fun with #MSCC #Ebene Accelerator "We then talked about the IT industry in Mauritius, salary issues in various field like system administration, software development etc. We analysed the reasons why people tend to hop from one company to another. That was a fun debate." -- Ish on MSCC meetup - Gang of Geeks "Flexible Learning Environment was quite interesting since these lines struck cords : "You're not a secretary....9 to 5 shouldn't suit you"....This allowed reflection...deep reflection....especially regarding the local mindset...which should be changed in a way which would promote creativity rather than choking it till death..." -- Yannick on 2nd MSCC Monthly Meet-up And others on Facebook... ;-) Visual impressions are available on our Meetup event page. More first time attendees We great pleasure I noticed that we have once again more first time visitors. A quick overlook showed that we had a majority of UoM students in first, second or last year. Some of them are already participating in the UoM Computer Club or are nominated as members of the Microsoft Student Partner (MSP) programme. Personally, I really appreciate the fact that the MSCC is able to gather such a broad audience. And as I wrote initially, the MSCC is technology-agnostic; we want IT people from any segment of this business. Of course, students which are about to delve into the 'real world' of working are highly welcome, and I hope that they might get one or other glimpse of experience or advice from employees. Sticking to the schedule? No, not really... And honestly, it was a good choice to go a little bit of the beaten tracks. I mean, yes we have a 'rough' agenda of topics that we would like to talk about or having a presentation about. But we keep it 'agile'. Due to the high number of new faces, we initiated another quick round of introductions and I gave a really brief overview of the MSCC. Next, we started to reflect on the Clean Code Developer (CCD) - Red Grade which we introduced on the last meetup. Nirvan was the lucky one and he did a good job on summarizing the various abbreviations of the first level of being a CCD. Actually, more interesting, we exchanged experience about the principles and practices of Red Grade, and it was very informative to get to know that Yann actually 'interviewed' a couple of friends, other students, local guys working in IT companies as well as some IT friends from India in order to counter-check on what he learned first-hand about Clean Code. Currently, he is reading the book of Robert C. Martin on that topic and I'm looking forward to his review soon. More output generates more input What seems to be like a personal mantra is working out pretty well for me since the beginning of this year. Being more active on social media networks, writing more article on my blog, starting the Mauritius Software Craftsmanship Community, and contributing more to other online communities has helped me to receive more project requests, job offers and possibilities to expand my business at IOS Indian Ocean Software Ltd. Actually, it is not a coincidence that one of the questions new craftsmen should answer during registration asks about having a personal blog. Whether you are just curious about IT, right in the middle of your Computer Studies, or already working in software development or system administration since a while you should consider to advertise and market yourself online. Easiest way to resolve this are to have online profiles on professional social media networks like LinkedIn, Xing, Twitter, and Google+ (no Facebook should be considered for private only), and considering to have a personal blog. Why? -- Be yourself, be proud of your work, and let other people know that you're passionate about your profession. Trust me, this is going to open up opportunities you might not have dreamt about... Exchanging ideas about having a professional online presence - MSCC meetup on the 26th October 2013 Furthermore, consider to put your Curriculum Vitae online, too. There are quite a number of service providers like 1ClickCV, Stack Overflow Careers 2.0, etc. which give you the ability to have an up to date CV online. At least put it on your site, next to your personal blog. Similar to what you would be able to see on my site here. Cyber Island Mauritius - are we there? A couple of weeks ago I got a 'cold' message on LinkedIn from someone living in the U.S. asking about the circumstances and conditions of the IT world of Mauritius. He has a great business idea, venture capital and is currently looking for a team of software developers (mainly mobile - iOS) for a new startup here in Mauritius. Since then we exchanged quite some details through private messages and Skype conversations, and I suggested that it might be a good chance to join our meetup through a conference call and see for yourself about potential candidates. During approximately 30 to 40 minutes the brief idea of the new startup was presented - very promising state-of-the-art technology aspects and integration of various public APIs -, and we had a good Q&A session about it. Also thanks to the excellent bandwidth provided by the Ebene Accelerator the video conference between three parties went absolutely well. Clean Code Developer - Orange Grade Hahaha - nice one... Being at the Orange Tower at Ebene and then talking about an Orange Grade as CCD. Well, once again I provided an overview of the principles and practices in that rank of Clean Code, and similar to our last meetup we discussed on the various aspect of each principle, whether someone already got in touch with it during studies or work, and how it could affect their future view on their source code. Following are the principles and practices of Clean Code Developer - Orange Grade: CCD Orange Grade - Principles Single Level of Abstraction (SLA) Single Responsibility Principle (SRP) Separation of Concerns (SoC) Source Code conventions CCD Orange Grade - Practices Issue Tracking Automated Integration Tests Reading, Reading, Reading Reviews Especially the part on reading technical books got some extra attention. We quickly gathered our views on that and came up with a result that ranges between Zero (0) and up to Fifteen (15) book titles per year. Personally, I'm keeping my progress between Six (6) and Eight (8) titles per year, but at least One (1) per quarter of a year. Which is also connected to the fact that I'm participating in the O'Reilly Reader Review Program and have a another benefit to get access to free books only by writing and publishing a review afterwards. We also had a good exchange on the extended topic of 'Reviews' - which to my opinion is abnormal difficult here in Mauritius for various reasons. As far as I can tell from my experience working with Mauritian software developers, either as colleagues, employees or during consulting services there are unfortunately two dominant pattern on that topic: Keeping quiet Running away Honestly, I have no evidence about why these are the two 'solutions' on reviews but that's the situation that I had to face over the last couple of years. Sitting together and talking about problematic issues, tackling down root causes of de-motivational activities and working on general improvements doesn't seem to have a ground within the IT world of Mauritius. Are you a typist or a creative software craftsman? - MSCC meetup on the 26th October 2013 One very good example that we talked about was the fact of 'job hoppers' as you can easily observe it on someone's CV - those people change job every single year; for no obvious reason! Frankly speaking, I wouldn't even consider an IT person like to for an interview. As a company you're investing money and effort into the abilities of your employees. Hiring someone that won't stay for a longer period is out of question. And sorry to say, these kind of IT guys smell fishy about their capabilities and more likely to cause problems than actually produce productive results. One of the reasons why there is a probation period on an employment contract is to give you the liberty to leave as early as possible in case that you don't like your new position. Don't fool yourself or waste other people's time and money by hanging around a full year only to snatch off the bonus payment... Future outlook: Developer's Conference Even though it is not official yet I already mentioned it several times during our weekly Code & Coffee sessions. The MSCC is looking forward to be able to organise or to contribute to an upcoming IT event. Currently, the rough schedule is set for April 2014 but this mainly depends on availability of location(s), a decent time frame for preparations, and the underlying procedures with public bodies to have it approved and so on. As soon as the information about date and location has been fixed there will be a 'Call for Papers' period in order to attract local IT enthusiasts to apply for a session slot and talk about their field of work and their passion in IT. More to come for sure... My resume of the day It was a great gathering and I am very pleased about the fact that we had another 15 craftsmen (plus 2 businessmen on conference call plus 2 young apprentices) in the same room, talking about IT related topics and sharing their experience as employees and students. Personally, I really appreciated the feedback from the students about their current view on their future career, and I really hope that some of them are going to pursue their dreams. Start promoting yourself and it will happen... Looking forward to your blogs! And last but not least our numbers on Meetup and Facebook have been increased as a direct consequence of this meetup. Please, spread the word about the MSCC and get your friends and colleagues to join our official site. The higher the number of craftsmen we have the better chances we have t achieve something great! Thanks!

    Read the article

  • Best ways to teach a beginner to program?

    - by Justin Standard
    Original Question I am currently engaged in teaching my brother to program. He is a total beginner, but very smart. (And he actually wants to learn). I've noticed that some of our sessions have gotten bogged down in minor details, and I don't feel I've been very organized. (But the answers to this post have helped a lot.) What can I do better to teach him effectively? Is there a logical order that I can use to run through concept by concept? Are there complexities I should avoid till later? The language we are working with is Python, but advice in any language is welcome. How to Help If you have good ones please add the following in your answer: Beginner Exercises and Project Ideas Resources for teaching beginners Screencasts / blog posts / free e-books Print books that are good for beginners Please describe the resource with a link to it so I can take a look. I want everyone to know that I have definitely been using some of these ideas. Your submissions will be aggregated in this post. Online Resources for teaching beginners: A Gentle Introduction to Programming Using Python How to Think Like a Computer Scientist Alice: a 3d program for beginners Scratch (A system to develop programming skills) How To Design Programs Structure and Interpretation of Computer Programs Learn To Program Robert Read's How To Be a Programmer Microsoft XNA Spawning the Next Generation of Hackers COMP1917 Higher Computing lectures by Richard Buckland (requires iTunes) Dive into Python Python Wikibook Project Euler - sample problems (mostly mathematical) pygame - an easy python library for creating games Create Your Own Games With Python ebook Foundations of Programming for a next step beyond basics. Squeak by Example Recommended Print Books for teaching beginners Accelerated C++ Python Programming for the Absolute Beginner Code by Charles Petzold

    Read the article

  • WCF Mono - BasicHttpBinding with SSL

    - by TheNextman
    I'm trying to port an existing WCF client application to run on Linux under Mono. Right now I'm testing everything out, figuring out what works on Mono and what doesn't. The client makes a super simple call over basicHttpBinding. It works great, until I enable SSL (that is, specify BasicHttpSecurityMode.Transport in the binding). Running on .NET in Windows, it works great Running on Mono on Ubuntu 9.10 / Mono 2.6 I get the following error: Exception in async operation: System.Net.WebException: Error getting response stream (Write: The authentication or decryption has failed.): SendFailure --- System.IO.IOException: The authentication or decryption has failed. --- Mono.Security.Protocol.Tls.TlsException: Invalid certificate received from server. Error code: 0xffffffff800b010a I've read the Mono security FAQ here: http://www.mono-project.com/FAQ:_Security; however the SSL certificate on the server is from a root CA (a purchased certificate) - issued by Equifax Secure Certificate Authority. I ran the TlsTest tool on the Ubuntu install against the .svc URL and there are no problems/errors. Also I can hit the service fine in Firefox (no security warnings). What am I missing? Thanks in advance, Richard

    Read the article

  • Linq - how does it work??

    - by clarkeyboy
    Hey, I have just been looking into Linq with ASP.Net. It is very neat indeed. I was just wondering - how do all the classes get populated? I mean in ASP.Net, suppose you have a Linq file called Catalogue, and you then use a For loop to loop through Catalogue.Products and print each Product name. How do the details get stored? Does it just go through the Products table on page load and create another instance of class Product for each row, effectively copying an entire table into an array of class Product? If so, I think I have created a system very much like this, in the sense that there is a SiteContent module with an instance of each Manager class - for example there is UserManager, ProductManager, SettingManager and alike. UserManager contains an instance of the User class for each row in the Users table. They also contain methods such as Create, Update and Remove. These Managers and their "Items" are created on every page load. This just makes it nice and easy to access users, products, settings etc in every page as far as I, the developer, am concerned. Any any subsequent pages I need to create, I just need to reference SiteContent.UserManager to access a list of users, rather than executing a query from within that page (ie this method separates out data access from the workings of the page, in the same way as using code behind separates out the workings of the page from how the page is layed out). However the problem is that this technique seems rather slow. I mean it is effectively creating a database on every page load, taking data from another database. I have taken measures such as preventing, for example, the ProductManager from being created if it is not referenced on page load. Therefore it does not load data into storage when it is not needed. My question is basically whether my technique does the exact same thing as Linq, in the sense of duplicating data from tables into properties of classes.. Thanks in advance for any advice or answers about this. Regards, Richard Clarke

    Read the article

  • Internet Explorer 7 Bugs - incorrect display OR dead links

    - by ClarkeyBoy
    Hi, I recently launched a website I have been developing over the past year - http://Live.heritageartpapers.co.uk/. My dad, who owns the company, had a phone call today saying it doesnt display properly in IE7. Bug #1: The header and footer are both in a div, whereas the content is in a table between the two divs. Reportedly the content (table) sometimes (not always, according to IETester) displays below the footer, but the footer still displays where it is supposed to (ie there is a massive gap where the content should fit). Bug #2: When the content does display in the correct place, all the links on the page are dead - click on them and nothing happens. As you can see if you view it in Firefox (the version I am using is 3.6), the links in the left hand menu turn orange on mouseover. However they do not even do this in IE7. Note that they do turn orange and do work if the content is displayed below the footer. I cant see why its happening - according to IETester, the IE7 interpreted source code has all the tags capitalised and many quotes removed (for example for the id attribute on most, if not all, tags) but I doubt this could cause the above bugs, could it? My question is whether anyone has ever seen any of these problems before, and/or has a solution to any of these problems?? I currently do not have the application open, but will post any relevant code in a few minutes. Alternatively just use view source. Many thanks in advance. Regards, Richard Clarke

    Read the article

  • Postback event not firing on FIRST button click..

    - by ClarkeyBoy
    Hi, I have a form which accepts two arguments. The first one is mode - this is either view, new or edit. If it is new then the second argument is type - this is either range, collection or design. When set to new, and the type is valid, a new instance of that type is created and the data from the form is added to it. The item (range, collection or design) then validates the data. If any of the data is invalid then it throws an error, and this error is displayed at the top of the form telling the user why it is invalid. A variable, _Databind, is set to false so that it does not change the data input by the user (in the form fields). The button used to submit the button is called btnSave, and is created in the html source. The click event is wired up in the form Protected Sub Blah(sender, e) Handles btnSave.Click. Strangely, whenever I edit an item that already exists the form submits fine the first time - the click event is fired. However when in "new" mode I have to click the button twice to fire the event. It also blanks all the form fields out on first click. I have even put a Response.Write("Hello World") line at the start of the click event - this is not being output on first click when adding a new item either. It is on first load when the mode is set to edit however. Does anyone have any ideas as to what is causing it to behave this way? Thanks in advance for any help. Regards, Richard

    Read the article

  • ASP.Net application timeout

    - by ClarkeyBoy
    Hi, I have an application I have just deployed which, for complicated reasons, stores all the data from the database in a module the first time any data from the specific table is required (i.e. when a customer requests to view a product for the first time, all the product data is stored in the ProductManager class (of which an instance is stored in a shared property of the SiteContent class, making the ProductManager easily accessible from any page). Now forget that you are probably now glaring at me for using this approach.. I am sure it has its inefficiencies but I have only been studying .Net for a year or so now so I am still learning. One thing I have noticed is that I can go on the site once, then revisit it 5 minutes later and it will load all the data into the ProductManager class again. It seems this is a .Net application timeout thing - since the session timeout is set to 30 minutes and, when I am logged in on the administration frontend, it logs me out after 5 minutes (ish). Does anyone have any idea how to change this? Is there any way I can change this in the code without having to contact the hosting company? If not in the code is there any way to change this in the web.config? Thanks in advance. Regards, Richard

    Read the article

  • CSS - Class hierarchies???

    - by ClarkeyBoy
    Hi, I have a site with a customer front end, which has a catalogue, homepage, contact page, about us page and so on. There is also an administration front end. I would like to implement a kind of hierarchy where any elements within an element with class "admin" will inherit properties set in the admin stylesheet and anything else inherits from the customer stylesheet. The purpose of this is so that admin can login on the admin front end, where they have access to lots of advanced stuff, but they can also navigate to the customer front end where they can execute basic tasks (such as hiding catalogue items, running a debug script if a customer reports an issue and so on). I would like all the admin tools on the customer front end to have properties taken from the admin stylesheet instead of the customer one - this will change the background colour and stuff. Is there any easy way to set up like namespaces to make things simpler, for example: .admin { .list { .list-subtitle { } .list-item { } } a { } } .customer { .list { .list-subtitle { } .list-item { } } a { } } I know it can be like: .admin .list {} .admin .list .list-item {} .admin a I just dont want to have to keep putting .admin all the time. Does anyone have any suggestions on how I could do this? I suppose I could write a .net class which sets this up and writes a stylesheet according to whats put into it, but then I would not be able to read the styles so easily add there would be all sorts of like Classes.Add(blah) and so on. Thanks in advance for any replies... Regards, Richard

    Read the article

  • Reference for proper handling of PID file on Unix

    - by bignose
    Where can I find a well-respected reference that details the proper handling of PID files on Unix? On Unix operating systems, it is common practice to “lock” a program (often a daemon) by use of a special lock file: the PID file. This is a file in a predictable location, often ‘/var/run/foo.pid’. The program is supposed to check when it starts up whether the PID file exists and, if the file does exist, exit with an error. So it's a kind of advisory, collaborative locking mechanism. The file contains a single line of text, being the numeric process ID (hence the name “PID file”) of the process that currently holds the lock; this allows an easy way to automate sending a signal to the process that holds the lock. What I can't find is a good reference on expected or “best practice” behaviour for handling PID files. There are various nuances: how to actually lock the file (don't bother? use the kernel? what about platform incompatibilities?), handling stale locks (silently delete them? when to check?), when exactly to acquire and release the lock, and so forth. Where can I find a respected, most-authoritative reference (ideally on the level of W. Richard Stevens) for this small topic?

    Read the article

  • How is jQuery so fast?

    - by ClarkeyBoy
    Hey, I have a rather large application which, on the admin frontend, takes a few seconds to load a page because of all the pageviews that it has to load into objects before displaying anything. Its a bit complex to explain how the system works, but a few of my other questions explains the system in great detail. The main difference between what they say and the current system is that the customer frontend no longer loads all the pageviews into objects when a customer first views the page - it simply adds the pageview to the database and creates an object in an unsynchronised list... to put it simply, when a customer views a page it no longer loads all the pageviews into objects; but the admin frontend still does. I have been working on some admin tools on the customer frontend recently, so if an administrator clicks the description of an item in the catalogue then the right hand column will display statistics and available actions for the selected item. To do this the page which gets loaded (through $('action-container').load(bla bla bla);) into the right hand column has to loop through ALL the pageviews - this ultimately means that ALL the pageviews are loaded into objects if they haven't been already. For some reason this loads really REALLY fast. The difference in speed is only like a second on my dev site, but the live site has thousands of pageviews so the difference is quite big... So my question is: why is it that the admin frontend loads so slowly while using $(bla).load(bla); is so fast? I mean whatever method jQuery uses, can't browsers use this method too and load pages super-fast? Obviously not as someone would've done that by now - but I am interested to know just why the difference is so big... is it just my system or is there a major difference in speed between the browser getting a page and jQuery getting a page? Do other people experience the same kind of differences? Thanks in advance, Regards, Richard

    Read the article

  • OpenCV: Shift/Align face image relative to reference Image (Image Registration)

    - by Abhischek
    I am new to OpenCV2 and working on a project in emotion recognition and would like to align a facial image in relation to a reference facial image. I would like to get the image translation working before moving to rotation. Current idea is to run a search within a limited range on both x and y coordinates and use the sum of squared differences as error metric to select the optimal x/y parameters to align the image. I'm using the OpenCV face_cascade function to detect the face images, all images are resized to a fixed (128x128). Question: Which parameters of the Mat image do I need to modify to shift the image in a positive/negative direction on both x and y axis? I believe setImageROI is no longer supported by Mat datatypes? I have the ROIs for both faces available however I am unsure how to use them. void alignImage(vector<Rect> faceROIstore, vector<Mat> faceIMGstore) { Mat refimg = faceIMGstore[1]; //reference image Mat dispimg = faceIMGstore[52]; // "displaced" version of reference image //Rect refROI = faceROIstore[1]; //Bounding box for face in reference image //Rect dispROI = faceROIstore[52]; //Bounding box for face in displaced image Mat aligned; matchTemplate(dispimg, refimg, aligned, CV_TM_SQDIFF_NORMED); imshow("Aligned image", aligned); } The idea for this approach is based on Image Alignment Tutorial by Richard Szeliski Working on Windows with OpenCV 2.4. Any suggestions are much appreciated.

    Read the article

  • is this valid json array using php

    - by Rich
    Hello, I need to convert some code done by someone else, to work in my mvc model It is using some functions like EOD that I don't understand. Does that still work in a class? Primarely, my question focusus on the json output. The old code does not use the php json_encode function, but outputs it directly like this ?> { "username": "<?php echo $_SESSION['username'];?>", "items": [ <?php echo $items;?> ] } <?php I would do it like this, but I need to be sure it's right for the items part header('Content-type: application/json'); $output = array("username"=> isset( $_SESSION['username'] ) ? $_SESSION['username'] : "?", "items"=>$items ); $this->content = json_encode($output); This is some background on how the $items is made. An item is stored like this: $_SESSION['chatHistory'][$_POST['to']] .= <<<EOD { "s": "1", "f": "{$to}", "m": "{$messagesan}" }, EOD; and it is put in the $items variable like this $items = ''; if ( !empty($_SESSION['openChatBoxes'] ) ) { foreach ( $_SESSION['openChatBoxes'] as $chatbox => $void ) { $items .= $this->chatBoxSession($chatbox); } } //The chatBoxSession() function takes an item from the $_SESSION['chatHistory'] array and returns it. I hope this was somewhat clear enough? The php manual warns that in some cases you don't get an array output, instead you get an object. So, with the EOD syntax, I am not really sure. It could save me some time if I know some things are doing what they supposed too, and giving the right output. thanks, Richard

    Read the article

  • ASP.NET 2.0 RijndaelManaged encryption algorithm vs. FIPS

    - by R Rush
    I'm running into an issue with an ASP.NET 2.0 application. Our network folks just upped our security, and now I get the floowing error whenever I try to access the app: "This implementation is not part of the Windows Platform FIPS validated cryptographic algorithms." I've done a little research, and it sounds like ASP.NET uses the RijndaelManaged AES encryption algorithm to encrypt the ViewState of pages... and RijndaelManaged is on the list of algorithms that aren't FIPS compliant. We're certainly not explicitly calling any encryption algorithm... much less anything on the non-compliant list. This ViewState business makes sense to me, I guess. The thing I can't muddle out, though, is what to do about it. I've found a KB article that suggests using a web.config setting to specify a different algorithm... but either that didn't stick, or that algorithm isn't up to snuff, either. So: 1) Is the RijndaelManaged / ViewState thing actually the problem? Or am I barking up the wrong tree? 2) How to I specify what algorithm to use instead of RijndaelManaged? I've got a list of algorithms that are and aren't compliant; I'm just not sure where to plug that information in. Thanks! Richard

    Read the article

  • Floating point precision in Visual C++

    - by Luigi Giaccari
    HI, I am trying to use the robust predicates for computational geometry from Jonathan Richard Shewchuk. I am not a programmer, so I am not even sure of what I am saying, I may be doing some basic mistake. The point is the predicates should allow for precise aritmthetic with adaptive floating point precision. On my computer: Asus pro31/S (Core Due Centrino Processor) they do not work. The problem may stay in the fact the my computer may use some improvements in the floating point precision taht conflicts with the one used by Shewchuk. The author says: /* On some machines, the exact arithmetic routines might be defeated by the / / use of internal extended precision floating-point registers. Sometimes / / this problem can be fixed by defining certain values to be volatile, / / thus forcing them to be stored to memory and rounded off. This isn't / / a great solution, though, as it slows the arithmetic down. */ Now what I would like to know is that there is a way, maybe some compiler option, to turn off the internal extended precision floating-point registers. I really appriaciate your help

    Read the article

  • Why is it assumed that send may return with less than requested data transmitted on a blocking socke

    - by Ernelli
    The standard method to send data on a stream socket has always been to call send with a chunk of data to write, check the return value to see if all data was sent and then keep calling send again until the whole message has been accepted. For example this is a simple example of a common scheme: int send_all(int sock, unsigned char *buffer, int len) { int nsent; while(len 0) { nsent = send(sock, buffer, len, 0); if(nsent == -1) // error return -1; buffer += nsent; len -= nsent; } return 0; // ok, all data sent } Even the BSD manpage mentions that ...If no messages space is available at the socket to hold the message to be transmitted, then send() normally blocks... Which indicates that we should assume that send may return without sending all data. Now I find this rather broken but even W. Richard Stevens assumes this in his standard reference book about network programming, not in the beginning chapters, but the more advanced examples uses his own writen (write all data) function instead of calling write. Now I consider this still to be more or less broken, since if send is not able to transmit all data or accept the data in the underlying buffer and the socket is blocking, then send should block and return when the whole send request has been accepted. I mean, in the code example above, what will happen if send returns with less data sent is that it will be called right again with a new request. What has changed since last call? At max a few hundred CPU cycles have passed so the buffer is still full. If send now accepts the data why could'nt it accept it before? Otherwise we will end upp with an inefficient loop where we are trying to send data on a socket that cannot accept data and keep trying, or else? So it seems like the workaround, if needed, results in heavily inefficient code and in those circumstances blocking sockets should be avoided at all an non blocking sockets together with select should be used instead.

    Read the article

  • Server.Execute(path).. executed page returns the calling pages' url from request.url..

    - by ClarkeyBoy
    Hey, As explained in the title, I am having a problem with getting the URL of the page being executed from within a page. Basically I have a dynamic catalogue, where customers select products they are interested in. The manager of the company I am doing this for would like to be able to create an up to date offline catalogue at any given time, to send out to customers who dont have an internet connection. So far its going really well. I am using Server.Execute to get the content for each page, then putting it in static html pages and changing the dynamic links to static html links (ie changing all aspx links to htm). I am able to output all the pages for about us, contact us, home, and the entire catalogue. However, one of the stylesheets which is included in the page based on the URL (if the page is in the administration section then it is not included, otherwise it is) is not being included in the pages when it should be. I have tried outputting the URL but it just returns the URL of the calling page, not the page being called. Does anyone have any idea why this is happening? Any help would be greatly appreciated. Regards, Richard Clarke

    Read the article

  • Django: Serving Media Behind Custom URL

    - by TheLizardKing
    So I of course know that serving static files through Django will send you straight to hell but I am confused on how to use a custom url to mask the true location of the file using Django. http://stackoverflow.com/questions/2681338/django-serving-a-download-in-a-generic-view but the answer I accepted seems to be the "wrong" way of doing things. urls.py: url(r'^song/(?P<song_id>\d+)/download/$', song_download, name='song_download'), views.py: def song_download(request, song_id): song = Song.objects.get(id=song_id) fsock = open(os.path.join(song.path, song.filename)) response = HttpResponse(fsock, mimetype='audio/mpeg') response['Content-Disposition'] = "attachment; filename=%s - %s.mp3" % (song.artist, song.title) return response This solution works perfectly but not perfectly enough it turns out. How can I avoid having a direct link to the mp3 while still serving through nginx/apache? EDIT 1 - ADDITIONAL INFO Currently I can get my files by using an address such as: http://www.example.com/music/song/1692/download/ But the above mentioned method is the devil's work. How can I accomplished what I get above while still making nginx/apache serve the media? Is this something that should be done at the webserver level? Some crazy mod_rewrite? http://static.example.com/music/Aphex%20Twin%20-%20Richard%20D.%20James%20(V0)/10%20Logon-Rock%20Witch.mp3

    Read the article

  • How best to implement "favourites" feature? (like favourite products on a data driven website)

    - by ClarkeyBoy
    Hi, I have written a dynamic database driven, object oriented website with an administration frontend etc etc. I would like to add a feature where customers can save items as "favourites", without having to create an account and login, to come back to them later, but I dont know how exactly to go about doing this... I see three options: Log favourites based on IP address and then change these to be logged against an account if the customer then creates an account; Force customers to create an account to be able to use this functionality; Log favourites based on IP address but give users the option to save their favourites under a name they specify. The problem with option 1 is that I dont know much about IP addresses - my Dad thinks they are unique, but I know people have had problems with systems like this. The problem with 1 and 2 is that accounts have not been opened up to customers yet - only administrators can log in at the moment. It should be easy to alter this (no more than a morning or afternoons work) but I would also have to implement usergroups too. The problem with option 3 is that if user A saves a favourites list called "My Favourites", and then user B tries to save a list under this name and it is refused, user B will then be able to access the list saved by user A because they now know it already exists. A solution to this is to password protect lists, but to go to all this effort I may as well implement option 2. Of course I could always use option 4; use an alternative if anyone can suggest a better solution than any of the above options. So has anyone ever done something like this before? If so how did you go about it? What do you recommend (or not recommend)? Many thanks in advance, Regards, Richard

    Read the article

  • INSERT INTO sql server error : invalid object name

    - by thormayer
    I have a problem with some statement on SQL SERVER the error I get is that I have an invalid object name 'TBL_VIDEOS' INSERT INTO TBL_VIDEOS ( TBL_VIDEOS.ID, TBL_VIDEOS.TITLE, TBL_VIDEOS.V_DESCRIPTION, TBL_VIDEOS.UPLOAD_DATE, TBL_VIDEOS.V_VIEWS, TBL_VIDEOS.USERNAME, TBL_VIDEOS.RATING, TBL_VIDEOS.V_SOURCE, TBL_VIDEOS.FLAG ) VALUES ('Z8MTRH3LmTVm', 'Why Creativity is the New Economy', 'Dr Richard Florida, one of the world&#39;s leading experts on economic competitiveness, demographic trends and cultural and technological innovation shows how developing the full human and creative capabilities of each individual, combined with institutional supports such as commercial innovation and new industry, will put us back on the path to economic and social prosperity. Listen to the podcast of the full event including audience Q&amp;A: http://www.thersa.org/events/audio-and-past-events/2012/why-creativity-is-the-new-economy Our events are made possible with the support of our Fellowship. Support us by donating or applying to become a Fellow. Donate: http://www.thersa.org/support-the-rsa Become a Fellow: http://www.thersa.org/fellowship/apply', CURRENT_TIMESTAMP, 0, 1, 0, 'http://www.youtube.com/watch?v=VPX7gowr2vE&feature=g-all-u' ,0) and I wonder what i've done wrong ? (btw, the error refer to line 1.. guess its the table name.. but it correct!

    Read the article

  • "Unable to open file", when the program tries to open file in /proc

    - by tristartom
    Hi, I try to read file /proc/'pid'/status, using c program. The code is as follows, and even I use sudo to run it, the prompt still keeps throwing "Unable to open file". Please let me know if you have any ideas on how to fix this. thanks Richard ... int main (int argc, char* argv[]) { string line; char* fileLoc; if(argc != 2) { cout << "a.out file_path" << endl; fileLoc = "/proc/net/dev"; } else { sprintf(fileLoc, "/proc/%d/status", atoi(argv[1])); } cout<< fileLoc << endl; ifstream myfile (fileLoc); if (myfile.is_open()) { while (! myfile.eof() ) { getline (myfile,line); cout << line << endl; } myfile.close(); } else cout << "Unable to open file"; return 0; }

    Read the article

  • JavaScript snippet to read and output XML file on page load?

    - by Banderdash
    Hey guys, hoping I might get some help. Have XML file here of a list of books each with unique id and numeral value for whether they are checked out or not. I need a JavaScript snippet that requests the XML file after the page loads and displays the content of the XML file. XML file looks like this: <?xml version="1.0" encoding="UTF-8" ?> <response> <library name="My Library"> <book id="1" checked-out="1"> <authors> <author>John Resig</author> </authors> <title>Pro JavaScript Techniques (Pro)</title> <isbn-10>1590597273</isbn-10> </book> <book id="2" checked-out="0"> <authors> <author>Erich Gamma</author> <author>Richard Helm</author> <author>Ralph Johnson</author> <author>John M. Vlissides</author> </authors> <title>Design Patterns: Elements of Reusable Object-Oriented Software</title> <isbn-10>0201633612</isbn-10> </book> ... </library> </response> Would LOVE any and all help!

    Read the article

  • How can I have a VBA macro perform a Search/Replace in formulas across an entire workbook?

    - by richardtallent
    I distribute an Excel workbook to a number of users, and they are supposed to have a particular macro file pre-installed in their XLSTART folder. If they don't have the macro installed correctly, and they send the workbook back to me, any formulas depending on it include the full path of the macro, e.g.: 'C:\Documents and Settings\richard.tallent\Application Data\ Microsoft\Excel\XLSTART\pcs.xls'!MyMacroFunction() I want to create a quick macro I can use to remove the improper path from every formula in the workbook. I've successfully retrieved the special folder using GetSpecialFolder (an external function that is working just fine), but the Replace call itself shown below throws an "Application-defined or object-defined error". Public Sub FixBrokenMacroFormulas() Dim badpath As String badpath = "'" & GetSpecialFolder(AppDataFolder) & "\Microsoft\Excel\XLSTART\mymacro.xls'!" Dim Sheet As Worksheet For Each Sheet In ActiveWorkbook.Sheets Call Sheet.Activate Call Sheet.Select(True) Call Selection.Replace(What:=badpath, Replacement:="", LookIn:=xlFormulas) ''//LookAt:=xlPart, MatchCase:=False, SearchFormat:=False, ReplaceFormat:=False Next End Sub Automating search and replace isn't exactly my forte, what am I doing wrong? I've already commented out some of the parameters that don't seem essential.

    Read the article

  • How can I share an entity framework model across website users

    - by richardmoss
    Hello, Currently my website is based around MVC and the Entity Framework running against a SQL Server 2005 database. So far, it has all been running very smoothly, and I really enjoy MVC and its slimmer more concise code (and no huge viewstates or soul destroying postbacks ;)) Recently I was working on upgrading the site to use a simple forum system, and this is where I started running into problems. When I was testing the site using two different browsers, if I created or replied to a post in one browser, the other browser couldn't see the post. At the moment, each visitor to the site gets their own copy of the entity model, which I store in their session data. Obviously this is the problem as updates to one model aren't getting carried to the other. As a test, I tried storing a single copy of the model which all visitors would access by assigning the model to a static variable. This worked, and both browsers could see each others modifications. However, it had its side effects. For example, if I fired up both browsers at the same time and the model was initialized, one browser would crash, and the other would work fine, despite me using a locking object so in theory one of them should have been delayed until the model was ready (of course I could have implemented this wrong ;)). Also, originally this site did use one model for all visitors and when it was live, it frequently shut down - killing the IIS application pool while it did. Now I'm not sure if this was related, but I don't really want to reintroduce whatever bug I had that caused this shut down. So, my question is a simple one really - what is the best way of either using the same model for all website users so they all see updates, or if they do have separate copies (which I imagine will have a performance impact in time) how can the models detect changes in the database and update themselves according. Thanks in advance for any advice! Regards; Richard Moss

    Read the article

< Previous Page | 37 38 39 40 41 42 43 44  | Next Page >