Search Results

Search found 4157 results on 167 pages for 'zero subnet'.

Page 41/167 | < Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >

  • Potential impact of large broadcast domains

    - by john
    I recently switched jobs. By the time I left my last job our network was three years old and had been planned very well (in my opinion). Our address range was split down into a bunch of VLANs with the largest subnet a /22 range. It was textbook. The company I now work for has built up their network over about 20 years. It's quite large, reaches multiple sites, and has an eclectic mix of devices. This organisation only uses VLANs for very specific things. I only know of one usage of VLANs so far and that is the SAN which also crosses a site boundary. I'm not a network engineer, I'm a support technician. But occasionally I have to do some network traces for debugging problems and I'm astounded by the quantity of broadcast traffic I see. The largest network is a straight Class B network, so it uses a /16 mask. Of course if that were filled with devices the network would likely grind to a halt. I think there are probably 2000+ physical and virtual devices currently using that subnet, but it (mostly) seems to work. This practise seems to go against everything I've been taught. My question is: In your opinion and  From my perspective - What measurement of which metric would tell me that there is too much broadcast traffic bouncing about the network? And what are the tell-tale signs that you are perhaps treading on thin ice? The way I see it, there are more and more devices being added and that can only mean more broadcast traffic, so there must be a threshold. Would things just get slower and slower, or would the effects be more subtle than that?

    Read the article

  • what is best multi-server configuration with OpenVPN

    - by sebut
    We have a number of Database severs running MongoDB on Debian plus a number of Application servers also on Debian. The db servers hold replicating db clusters, so they need to talk to each other. Application servers need to talk to all db servers (for reasons of fault tolerance). The servers are potentially spread across multiple hosting centers, so we need secure channels between all servers. The number of servers is bound to grow, so we need a VPN solution that's easy to maintain and expand. This is why I feel that SSH that we use for testing might not be up to the task and OpenVPN seems the way to go. I have ruled out TAP, since I understand that this would mean all traffic going to all the servers - perhaps this is a misunderstanding and TAP acts more like a switch? With TUN devices I imagine that all DB servers would live in their own separate subnet, they would also need a client configured to be able to connect to each of their peers. The application servers could live in a common subnet range with a client config only. Does this sound like a reasonable setup? Strangely, on the web I did not find anything about multi-server with OpenVPN. Thanks for all insights and ideas!

    Read the article

  • WPF storyboard animation issue when using VisualBrush

    - by Flack
    Hey guys, I was playing around with storyboards, a flipping animation, and visual brushes. I have encountered an issue though. Below is the xaml and code-behind of a small sample I quickly put together to try to demonstrate the problem. When you first start the app, you are presented with a red square and two buttons. If you click the "Flip" button, the red square will "flip" over and a blue one will appear. In reality, all that is happening is that the scale of the width of the StackPanel that the red square is in is being decreased until it reaches zero and then the StackPanel where a blue square is, whose width is initially scaled to zero, has its width increased. If you click the "Flip" button a few times, the animation looks ok and smooth. Now, if you hit the "Reflection" button, a reflection of the red/blue buttons is added to their respective StackPanels. Hitting the "Flip" button now will still cause the flip animation but it is no longer a smooth animation. The StackPanels width often does not shrink to zero. The width shrinks somewhat but then just stops before being completely invisible. Then the other StackPanel appears as usual. The only thing that changed was adding the reflection, which is just a VisualBrush. Below is the code. Does anyone have any idea why the animations are different between the two cases (stalling in the second case)? Thanks. <Window xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xml:lang="en-US" xmlns:d="http://schemas.microsoft.com/expression/blend/2006" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" mc:Ignorable="d" x:Class="WpfFlipTest.Window1" x:Name="Window" Title="Window1" Width="214" Height="224"> <Window.Resources> <Storyboard x:Key="sbFlip"> <DoubleAnimationUsingKeyFrames BeginTime="00:00:00" Storyboard.TargetName="redStack" Storyboard.TargetProperty="(UIElement.RenderTransform).(ScaleTransform.ScaleX)"> <SplineDoubleKeyFrame KeyTime="00:00:00.4" Value="0"/> </DoubleAnimationUsingKeyFrames> <DoubleAnimationUsingKeyFrames BeginTime="00:00:00.4" Storyboard.TargetName="blueStack" Storyboard.TargetProperty="(UIElement.RenderTransform).(ScaleTransform.ScaleX)"> <SplineDoubleKeyFrame KeyTime="00:00:00.8" Value="1"/> </DoubleAnimationUsingKeyFrames> </Storyboard> <Storyboard x:Key="sbFlipBack"> <DoubleAnimationUsingKeyFrames BeginTime="00:00:00" Storyboard.TargetName="blueStack" Storyboard.TargetProperty="(UIElement.RenderTransform).(ScaleTransform.ScaleX)"> <SplineDoubleKeyFrame KeyTime="00:00:00.4" Value="0"/> </DoubleAnimationUsingKeyFrames> <DoubleAnimationUsingKeyFrames BeginTime="00:00:00.4" Storyboard.TargetName="redStack" Storyboard.TargetProperty="(UIElement.RenderTransform).(ScaleTransform.ScaleX)"> <SplineDoubleKeyFrame KeyTime="00:00:00.8" Value="1"/> </DoubleAnimationUsingKeyFrames> </Storyboard> </Window.Resources> <Grid x:Name="LayoutRoot" Background="Gray"> <Grid.RowDefinitions> <RowDefinition Height="Auto"/> <RowDefinition Height="Auto"/> </Grid.RowDefinitions> <Grid.ColumnDefinitions> <ColumnDefinition Width="Auto"/> <ColumnDefinition Width="Auto"/> </Grid.ColumnDefinitions> <StackPanel Name="redStack" Grid.Row="0" Grid.Column="0" RenderTransformOrigin="0.5,0.5"> <StackPanel.RenderTransform> <ScaleTransform/> </StackPanel.RenderTransform> <Border Name="redBorder" BorderBrush="Transparent" BorderThickness="4" Width="Auto" Height="Auto"> <Button Margin="0" Name="redButton" Height="75" Background="Red" Width="105" /> </Border> <Border Width="{Binding ElementName=redBorder, Path=ActualWidth}" Height="{Binding ElementName=redBorder, Path=ActualHeight}" Opacity="0.2" BorderBrush="Transparent" BorderThickness="4" Name="redRefelction" Visibility="Collapsed"> <Border.OpacityMask> <LinearGradientBrush StartPoint="0,0" EndPoint="0,1"> <LinearGradientBrush.GradientStops> <GradientStop Offset="0" Color="Black"/> <GradientStop Offset=".6" Color="Transparent"/> </LinearGradientBrush.GradientStops> </LinearGradientBrush> </Border.OpacityMask> <Border.Background> <VisualBrush Visual="{Binding ElementName=redButton}"> <VisualBrush.Transform> <ScaleTransform ScaleX="1" ScaleY="-1" CenterX="52.5" CenterY="37.5" /> </VisualBrush.Transform> </VisualBrush> </Border.Background> </Border> </StackPanel> <StackPanel Name="blueStack" Grid.Row="0" Grid.Column="0" RenderTransformOrigin="0.5,0.5"> <StackPanel.RenderTransform> <ScaleTransform ScaleX="0"/> </StackPanel.RenderTransform> <Border Name="blueBorder" BorderBrush="Transparent" BorderThickness="4" Width="Auto" Height="Auto"> <Button Grid.Row="0" Grid.Column="1" Margin="0" Width="105" Background="Blue" Name="blueButton" Height="75"/> </Border> <Border Width="{Binding ElementName=blueBorder, Path=ActualWidth}" Height="{Binding ElementName=blueBorder, Path=ActualHeight}" Opacity="0.2" BorderBrush="Transparent" BorderThickness="4" Name="blueRefelction" Visibility="Collapsed"> <Border.OpacityMask> <LinearGradientBrush StartPoint="0,0" EndPoint="0,1"> <LinearGradientBrush.GradientStops> <GradientStop Offset="0" Color="Black"/> <GradientStop Offset=".6" Color="Transparent"/> </LinearGradientBrush.GradientStops> </LinearGradientBrush> </Border.OpacityMask> <Border.Background> <VisualBrush Visual="{Binding ElementName=blueButton}"> <VisualBrush.Transform> <ScaleTransform ScaleX="1" ScaleY="-1" CenterX="52.5" CenterY="37.5" /> </VisualBrush.Transform> </VisualBrush> </Border.Background> </Border> </StackPanel> <Button Grid.Row="1" Click="FlipButton_Click" Height="19.45" HorizontalAlignment="Left" VerticalAlignment="Top" Width="76">Flip</Button> <Button Grid.Row="0" Grid.Column="1" Click="ReflectionButton_Click" Height="19.45" HorizontalAlignment="Left" VerticalAlignment="Top" Width="76">Reflection</Button> </Grid> </Window> Here are the button click handlers: using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Windows; using System.Windows.Controls; using System.Windows.Data; using System.Windows.Documents; using System.Windows.Input; using System.Windows.Media; using System.Windows.Media.Imaging; using System.Windows.Navigation; using System.Windows.Shapes; using System.Windows.Media.Animation; namespace WpfFlipTest { public partial class Window1 : Window { public Window1() { InitializeComponent(); } bool flipped = false; private void FlipButton_Click(object sender, RoutedEventArgs e) { Storyboard sbFlip = (Storyboard)Resources["sbFlip"]; Storyboard sbFlipBack = (Storyboard)Resources["sbFlipBack"]; if (flipped) { sbFlipBack.Begin(); flipped = false; } else { sbFlip.Begin(); flipped = true; } } bool reflection = false; private void ReflectionButton_Click(object sender, RoutedEventArgs e) { if (reflection) { reflection = false; redRefelction.Visibility = Visibility.Collapsed; blueRefelction.Visibility = Visibility.Collapsed; } else { reflection = true; redRefelction.Visibility = Visibility.Visible; blueRefelction.Visibility = Visibility.Visible; } } } } UPDATE: I have been testing this some more to try to find out what is causing the issue I am seeing and I believe I found what is causing the issue. Below I have pasted new xaml and code-behind. The new sample below is very similar to the original sample, with a few minor modifications. The xaml basically consists of two stack panels, each containing two borders. The second border in each stack panel is a visual brush (a reflection of the border above it). Now, when I click the "Flip" button, one stack panel gets its ScaleX reduced to zero, while the second stack panel, whose initial ScaleX is zero, gets its ScaleX increased to 1. This animation gives the illusion of flipping. There are also two textblocks which display the scale factor of each stack panel. I added those to try to diagnose my issue. The issue is (as described in the oringal post) that the flipping animation is not smooth. Every time I hit the flip button, the animation starts but whenever the ScaleX factor gets to around .14 to .16, the animation looks like it stalls and the stack panels never have there ScaleX reduced to zero, so they never totally disappear. Now, the strange thing is that if I change the Width/Height properties of the "frontBorder" and "backBorder" borders defined below to use explict values instead of Auto, such as Width=105 and Height=75 (to match the button in the border) everything works fine. The animation stutters the first two or three times I run it but after that the flips are smooth and flawless. (BTW, when an animation is run for the first time, is there something going on in the background, some sort of initialization, that causes it to be a little slow the first time?) Is it possible that the Auto Width/Height of the borders are causing the issue? I can reproduce it everytime but I am not sure why Auto Width/Height would be a problem. Below is the sample. Thanks for the help. <Window x:Class="FlipTest.Window1" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="Window1" Height="300" Width="300"> <Window.Resources> <Storyboard x:Key="sbFlip"> <DoubleAnimationUsingKeyFrames BeginTime="00:00:00" Storyboard.TargetName="front" Storyboard.TargetProperty="(UIElement.RenderTransform).(ScaleTransform.ScaleX)"> <SplineDoubleKeyFrame KeyTime="00:00:00.5" Value="0"/> </DoubleAnimationUsingKeyFrames> <DoubleAnimationUsingKeyFrames BeginTime="00:00:00.5" Storyboard.TargetName="back" Storyboard.TargetProperty="(UIElement.RenderTransform).(ScaleTransform.ScaleX)"> <SplineDoubleKeyFrame KeyTime="00:00:00.5" Value="1"/> </DoubleAnimationUsingKeyFrames> </Storyboard> <Storyboard x:Key="sbFlipBack"> <DoubleAnimationUsingKeyFrames BeginTime="00:00:00" Storyboard.TargetName="back" Storyboard.TargetProperty="(UIElement.RenderTransform).(ScaleTransform.ScaleX)"> <SplineDoubleKeyFrame KeyTime="00:00:00.5" Value="0"/> </DoubleAnimationUsingKeyFrames> <DoubleAnimationUsingKeyFrames BeginTime="00:00:00.5" Storyboard.TargetName="front" Storyboard.TargetProperty="(UIElement.RenderTransform).(ScaleTransform.ScaleX)"> <SplineDoubleKeyFrame KeyTime="00:00:00.5" Value="1"/> </DoubleAnimationUsingKeyFrames> </Storyboard> </Window.Resources> <Grid x:Name="LayoutRoot" Background="White" ShowGridLines="True"> <Grid.RowDefinitions> <RowDefinition Height="Auto"/> <RowDefinition Height="Auto"/> <RowDefinition Height="Auto"/> <RowDefinition Height="Auto"/> </Grid.RowDefinitions> <Grid.ColumnDefinitions> <ColumnDefinition Width="Auto"/> <ColumnDefinition Width="Auto"/> </Grid.ColumnDefinitions> <StackPanel x:Name="front" RenderTransformOrigin="0.5,0.5"> <StackPanel.RenderTransform> <ScaleTransform/> </StackPanel.RenderTransform> <Border Name="frontBorder" BorderBrush="Yellow" BorderThickness="2" Width="Auto" Height="Auto"> <Button Margin="0" Name="redButton" Height="75" Background="Red" Width="105" Click="FlipButton_Click"/> </Border> <Border Width="{Binding ElementName=frontBorder, Path=ActualWidth}" Height="{Binding ElementName=frontBorder, Path=ActualHeight}" Opacity="0.2" BorderBrush="Transparent"> <Border.OpacityMask> <LinearGradientBrush StartPoint="0,0" EndPoint="0,1"> <LinearGradientBrush.GradientStops> <GradientStop Offset="0" Color="Black"/> <GradientStop Offset=".6" Color="Transparent"/> </LinearGradientBrush.GradientStops> </LinearGradientBrush> </Border.OpacityMask> <Border.Background> <VisualBrush Visual="{Binding ElementName=frontBorder}"> <VisualBrush.Transform> <ScaleTransform ScaleX="1" ScaleY="-1" CenterX="52.5" CenterY="37.5" /> </VisualBrush.Transform> </VisualBrush> </Border.Background> </Border> </StackPanel> <StackPanel x:Name="back" RenderTransformOrigin="0.5,0.5"> <StackPanel.RenderTransform> <ScaleTransform ScaleX="0"/> </StackPanel.RenderTransform> <Border Name="backBorder" BorderBrush="Yellow" BorderThickness="2" Width="Auto" Height="Auto"> <Button Margin="0" Width="105" Background="Blue" Name="blueButton" Height="75" Click="FlipButton_Click"/> </Border> <Border Width="{Binding ElementName=backBorder, Path=ActualWidth}" Height="{Binding ElementName=backBorder, Path=ActualHeight}" Opacity="0.2" BorderBrush="Transparent"> <Border.OpacityMask> <LinearGradientBrush StartPoint="0,0" EndPoint="0,1"> <LinearGradientBrush.GradientStops> <GradientStop Offset="0" Color="Black"/> <GradientStop Offset=".6" Color="Transparent"/> </LinearGradientBrush.GradientStops> </LinearGradientBrush> </Border.OpacityMask> <Border.Background> <VisualBrush Visual="{Binding ElementName=backBorder}"> <VisualBrush.Transform> <ScaleTransform ScaleX="1" ScaleY="-1" CenterX="52.5" CenterY="37.5" /> </VisualBrush.Transform> </VisualBrush> </Border.Background> </Border> </StackPanel> <Button Grid.Row="1" Click="FlipButton_Click" Height="19.45" HorizontalAlignment="Left" VerticalAlignment="Top" Width="76">Flip</Button> <TextBlock Grid.Row="2" Grid.Column="0" Foreground="DarkRed" Height="19.45" HorizontalAlignment="Left" VerticalAlignment="Top" Width="76" Text="{Binding ElementName=front, Path=(UIElement.RenderTransform).(ScaleTransform.ScaleX)}"/> <TextBlock Grid.Row="3" Grid.Column="0" Foreground="DarkBlue" Height="19.45" HorizontalAlignment="Left" VerticalAlignment="Top" Width="76" Text="{Binding ElementName=back, Path=(UIElement.RenderTransform).(ScaleTransform.ScaleX)}"/> </Grid> </Window> Code-behind: using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Windows; using System.Windows.Controls; using System.Windows.Data; using System.Windows.Documents; using System.Windows.Input; using System.Windows.Media; using System.Windows.Media.Imaging; using System.Windows.Navigation; using System.Windows.Shapes; using System.Windows.Media.Animation; namespace FlipTest { /// <summary> /// Interaction logic for Window1.xaml /// </summary> public partial class Window1 : Window { public Window1() { InitializeComponent(); } bool flipped = false; private void FlipButton_Click(object sender, RoutedEventArgs e) { Storyboard sbFlip = (Storyboard)Resources["sbFlip"]; Storyboard sbFlipBack = (Storyboard)Resources["sbFlipBack"]; if (flipped) { sbFlipBack.Begin(); flipped = false; } else { sbFlip.Begin(); flipped = true; } } } }

    Read the article

  • Set Proxy Credential in Web Browser Control

    - by rockacola
    I am working on a legacy code where an application uses AxSHDocVw.AxWebBrowser (NOT System.Windows.Forms.Control) to open up web pages and am extending it to take proxy into considerations. I have following example on http://www.pinvoke.net/default.aspx/wininet/internetsetoption.html to use InternetSetOption() to go through specified proxy and tested that it works. Now the hurdle is I tried everything but failed to pass username and password with following code: //-- Set Proxy Username bool resultF = InternetSetOption(IntPtr.Zero, INTERNET_OPTION_PROXY_USERNAME, username, username.Length+1); var errorF = Marshal.GetLastWin32Error(); //-- Set Proxy Password bool resultG = InternetSetOption(IntPtr.Zero, INTERNET_OPTION_PROXY_PASSWORD, password, password.Length+1); var errorG = Marshal.GetLastWin32Error(); Both resultF and resultG return true and has no errors but it still working. Any hint on what may be happening here? and what method do I have to debug this? Thanks in advance.

    Read the article

  • App using MonoTouch Core Graphics mysteriously crashes

    - by Stephen Ashley
    My app launches with a view controller and a simple view consisting of a button and a subview. When the user touches the button, the subview is populated with scrollviews that display the column headers, row headers, and cells of a spreadsheet. To draw the cells, I use CGBitmapContext to draw the cells, generate an image, and then put the image into the imageview contained in the scrollview that displays the cells. When I run the app on the iPad, it displays the cells just fine, and the scrollview lets the user scroll around in the spreadsheet without any problems. If the user touches the button a second time, the spreadsheet redraws and continues to work perfectly, If, however, the user touches the button a third time, the app crashes. There is no exception information display in the Application Output window. My first thought was that the successive button pushes were using up all the available memory, so I overrode the DidReceiveMemoryWarning method in the view controller and used a breakpoint to confirm that this method was not getting called. My next thought was that the CGBitmapContext was not getting released and looked for a Monotouch equivalent of Objective C's CGContextRelease() function. The closest I could find was the CGBitmapContext instance method Dispose(), which I called, without solving the problem. In order to free up as much memory as possible (in case I was somehow running out of memory without tripping a warning), I tried forcing garbage collection each time I finished using a CGBitmapContext. This made the problem worse. Now the program would crash moments after displaying the spreadsheet the first time. This caused me to wonder whether the Garbage Collector was somehow collecting something necessary to the continued display of graphics on the screen. I would be grateful for any suggestions on further avenues to investigate for the cause of these crashes. I have included the source code for the SpreadsheetView class. The relevant method is DrawSpreadsheet(), which is called when the button is touched. Thank you for your assistance on this matter. Stephen Ashley public class SpreadsheetView : UIView { public ISpreadsheetMessenger spreadsheetMessenger = null; public UIScrollView cellsScrollView = null; public UIImageView cellsImageView = null; public SpreadsheetView(RectangleF frame) : base() { Frame = frame; BackgroundColor = Constants.backgroundBlack; AutosizesSubviews = true; } public void DrawSpreadsheet() { UInt16 RowHeaderWidth = spreadsheetMessenger.RowHeaderWidth; UInt16 RowHeaderHeight = spreadsheetMessenger.RowHeaderHeight; UInt16 RowCount = spreadsheetMessenger.RowCount; UInt16 ColumnHeaderWidth = spreadsheetMessenger.ColumnHeaderWidth; UInt16 ColumnHeaderHeight = spreadsheetMessenger.ColumnHeaderHeight; UInt16 ColumnCount = spreadsheetMessenger.ColumnCount; // Add the corner UIImageView cornerView = new UIImageView(new RectangleF(0f, 0f, RowHeaderWidth, ColumnHeaderHeight)); cornerView.BackgroundColor = Constants.headingColor; CGColorSpace cornerColorSpace = null; CGBitmapContext cornerContext = null; IntPtr buffer = Marshal.AllocHGlobal(RowHeaderWidth * ColumnHeaderHeight * 4); if (buffer == IntPtr.Zero) throw new OutOfMemoryException("Out of memory."); try { cornerColorSpace = CGColorSpace.CreateDeviceRGB(); cornerContext = new CGBitmapContext (buffer, RowHeaderWidth, ColumnHeaderHeight, 8, 4 * RowHeaderWidth, cornerColorSpace, CGImageAlphaInfo.PremultipliedFirst); cornerContext.SetFillColorWithColor(Constants.headingColor.CGColor); cornerContext.FillRect(new RectangleF(0f, 0f, RowHeaderWidth, ColumnHeaderHeight)); cornerView.Image = UIImage.FromImage(cornerContext.ToImage()); } finally { Marshal.FreeHGlobal(buffer); if (cornerContext != null) { cornerContext.Dispose(); cornerContext = null; } if (cornerColorSpace != null) { cornerColorSpace.Dispose(); cornerColorSpace = null; } } cornerView.Image = DrawBottomRightCorner(cornerView.Image); AddSubview(cornerView); // Add the cellsScrollView cellsScrollView = new UIScrollView (new RectangleF(RowHeaderWidth, ColumnHeaderHeight, Frame.Width - RowHeaderWidth, Frame.Height - ColumnHeaderHeight)); cellsScrollView.ContentSize = new SizeF (ColumnCount * ColumnHeaderWidth, RowCount * RowHeaderHeight); Size iContentSize = new Size((int)cellsScrollView.ContentSize.Width, (int)cellsScrollView.ContentSize.Height); cellsScrollView.BackgroundColor = UIColor.Black; AddSubview(cellsScrollView); CGColorSpace colorSpace = null; CGBitmapContext context = null; CGGradient gradient = null; UIImage image = null; int bytesPerRow = 4 * iContentSize.Width; int byteCount = bytesPerRow * iContentSize.Height; buffer = Marshal.AllocHGlobal(byteCount); if (buffer == IntPtr.Zero) throw new OutOfMemoryException("Out of memory."); try { colorSpace = CGColorSpace.CreateDeviceRGB(); context = new CGBitmapContext (buffer, iContentSize.Width, iContentSize.Height, 8, 4 * iContentSize.Width, colorSpace, CGImageAlphaInfo.PremultipliedFirst); float[] components = new float[] {.75f, .75f, .75f, 1f, .25f, .25f, .25f, 1f}; float[] locations = new float[]{0f, 1f}; gradient = new CGGradient(colorSpace, components, locations); PointF startPoint = new PointF(0f, (float)iContentSize.Height); PointF endPoint = new PointF((float)iContentSize.Width, 0f); context.DrawLinearGradient(gradient, startPoint, endPoint, 0); context.SetLineWidth(Constants.lineWidth); context.BeginPath(); for (UInt16 i = 1; i <= RowCount; i++) { context.MoveTo (0f, iContentSize.Height - i * RowHeaderHeight + (Constants.lineWidth/2)); context.AddLineToPoint((float)iContentSize.Width, iContentSize.Height - i * RowHeaderHeight + (Constants.lineWidth/2)); } for (UInt16 j = 1; j <= ColumnCount; j++) { context.MoveTo((float)j * ColumnHeaderWidth - Constants.lineWidth/2, (float)iContentSize.Height); context.AddLineToPoint((float)j * ColumnHeaderWidth - Constants.lineWidth/2, 0f); } context.StrokePath(); image = UIImage.FromImage(context.ToImage()); } finally { Marshal.FreeHGlobal(buffer); if (gradient != null) { gradient.Dispose(); gradient = null; } if (context != null) { context.Dispose(); context = null; } if (colorSpace != null) { colorSpace.Dispose(); colorSpace = null; } // GC.Collect(); //GC.WaitForPendingFinalizers(); } UIImage finalImage = ActivateCell(1, 1, image); finalImage = ActivateCell(0, 0, finalImage); cellsImageView = new UIImageView(finalImage); cellsImageView.Frame = new RectangleF(0f, 0f, iContentSize.Width, iContentSize.Height); cellsScrollView.AddSubview(cellsImageView); } private UIImage ActivateCell(UInt16 column, UInt16 row, UIImage backgroundImage) { UInt16 ColumnHeaderWidth = (UInt16)spreadsheetMessenger.ColumnHeaderWidth; UInt16 RowHeaderHeight = (UInt16)spreadsheetMessenger.RowHeaderHeight; CGColorSpace cellColorSpace = null; CGBitmapContext cellContext = null; UIImage cellImage = null; IntPtr buffer = Marshal.AllocHGlobal(4 * ColumnHeaderWidth * RowHeaderHeight); if (buffer == IntPtr.Zero) throw new OutOfMemoryException("Out of memory: ActivateCell()"); try { cellColorSpace = CGColorSpace.CreateDeviceRGB(); // Create a bitmap the size of a cell cellContext = new CGBitmapContext (buffer, ColumnHeaderWidth, RowHeaderHeight, 8, 4 * ColumnHeaderWidth, cellColorSpace, CGImageAlphaInfo.PremultipliedFirst); // Paint it white cellContext.SetFillColorWithColor(UIColor.White.CGColor); cellContext.FillRect(new RectangleF(0f, 0f, ColumnHeaderWidth, RowHeaderHeight)); // Convert it to an image cellImage = UIImage.FromImage(cellContext.ToImage()); } finally { Marshal.FreeHGlobal(buffer); if (cellContext != null) { cellContext.Dispose(); cellContext = null; } if (cellColorSpace != null) { cellColorSpace.Dispose(); cellColorSpace = null; } // GC.Collect(); //GC.WaitForPendingFinalizers(); } // Draw the border on the cell image cellImage = DrawBottomRightCorner(cellImage); CGColorSpace colorSpace = null; CGBitmapContext context = null; Size iContentSize = new Size((int)backgroundImage.Size.Width, (int)backgroundImage.Size.Height); buffer = Marshal.AllocHGlobal(4 * iContentSize.Width * iContentSize.Height); if (buffer == IntPtr.Zero) throw new OutOfMemoryException("Out of memory: ActivateCell()."); try { colorSpace = CGColorSpace.CreateDeviceRGB(); // Set up a bitmap context the size of the whole grid context = new CGBitmapContext (buffer, iContentSize.Width, iContentSize.Height, 8, 4 * iContentSize.Width, colorSpace, CGImageAlphaInfo.PremultipliedFirst); // Draw the original grid into the bitmap context.DrawImage(new RectangleF(0f, 0f, iContentSize.Width, iContentSize.Height), backgroundImage.CGImage); // Draw the cell image into the bitmap context.DrawImage(new RectangleF(column * ColumnHeaderWidth, iContentSize.Height - (row + 1) * RowHeaderHeight, ColumnHeaderWidth, RowHeaderHeight), cellImage.CGImage); // Convert the bitmap back to an image backgroundImage = UIImage.FromImage(context.ToImage()); } finally { Marshal.FreeHGlobal(buffer); if (context != null) { context.Dispose(); context = null; } if (colorSpace != null) { colorSpace.Dispose(); colorSpace = null; } // GC.Collect(); //GC.WaitForPendingFinalizers(); } return backgroundImage; } private UIImage DrawBottomRightCorner(UIImage image) { int width = (int)image.Size.Width; int height = (int)image.Size.Height; float lineWidth = Constants.lineWidth; CGColorSpace colorSpace = null; CGBitmapContext context = null; UIImage returnImage = null; IntPtr buffer = Marshal.AllocHGlobal(4 * width * height); if (buffer == IntPtr.Zero) throw new OutOfMemoryException("Out of memory: DrawBottomRightCorner()."); try { colorSpace = CGColorSpace.CreateDeviceRGB(); context = new CGBitmapContext (buffer, width, height, 8, 4 * width, colorSpace, CGImageAlphaInfo.PremultipliedFirst); context.DrawImage(new RectangleF(0f, 0f, width, height), image.CGImage); context.BeginPath(); context.MoveTo(0f, (int)(lineWidth/2f)); context.AddLineToPoint(width - (int)(lineWidth/2f), (int)(lineWidth/2f)); context.AddLineToPoint(width - (int)(lineWidth/2f), height); context.SetLineWidth(Constants.lineWidth); context.SetStrokeColorWithColor(UIColor.Black.CGColor); context.StrokePath(); returnImage = UIImage.FromImage(context.ToImage()); } finally { Marshal.FreeHGlobal(buffer); if (context != null){ context.Dispose(); context = null;} if (colorSpace != null){ colorSpace.Dispose(); colorSpace = null;} // GC.Collect(); //GC.WaitForPendingFinalizers(); } return returnImage; } }

    Read the article

  • Searching for Windows User SID's in C#

    - by Ubiquitous Che
    Context Context first - issues I'm trying to resolve are below. One of our clients has asked as to quote how long it would take for us to improve one of our applications. This application currently provides basic user authentication in the form of username/password combinations. This client would like the ability for their employees to log-in using the details of whatever Windows User account is currently logged in at the time of running the application. It's not a deal-breaker if I tell them know - but the client might be willing to pay the costs of development to add this feature to the application. It's worth looking into. Based on my hunting around, it seems like storing the user login details against Domain\Username will be problematic if those details are changed. But Windows User SID's aren't supposed to change at all. I've got the impression that it would be best to record Windows Users by SID - feel free to relieve me of that if I'm wrong. I've been having a fiddle with some Windows API calls. From within C#, grabbing the current user's SID is easy enough. I can already take any user's SID and process it using LookupAccountSid to get username and domain for display purposes. For the interested, my code for this is at the end of this post. That's just the tip of the iceberg, however. The two issues below are completely outside my experience. Not only do I not know how to implement them - I don't even known how to find out how to implement them, or what the pitfalls are on various systems. Any help getting myself aimed in the right direction would be very much appreciated. Issue 1) Getting hold of the local user at runtime is meaningless if that user hasn't been granted access to the application. We will need to add a new section to our application's 'administrator console' for adding Windows Users (or groups) and assigning within-app permissions against those users. Something like an 'Add Windows User Login' button that will raise a pop-up window that will allow the user to search for available Windows User accounts on the network (not just the local machine) to be added to the list of available application logins. If there's already a component in .NET or Windows that I can shanghai into doing this for me, it would make me a very happy man. Issue 2) I also want to know how to take a given Windows User SID and check it against a given Windows User Group (probably taken from a database). I'm not sure how to get started with this one either, though I expect it to be easier than the issue above. For the Interested [STAThread] static void Main(string[] args) { MessageBox.Show(WindowsUserManager.GetAccountNameFromSID(WindowsIdentity.GetCurrent().User.Value)); MessageBox.Show(WindowsUserManager.GetAccountNameFromSID("S-1-5-21-57989841-842925246-1957994488-1003")); } public static class WindowsUserManager { public static string GetAccountNameFromSID(string SID) { try { StringBuilder name = new StringBuilder(); uint cchName = (uint)name.Capacity; StringBuilder referencedDomainName = new StringBuilder(); uint cchReferencedDomainName = (uint)referencedDomainName.Capacity; WindowsUserManager.SID_NAME_USE sidUse; int err = (int)ESystemError.ERROR_SUCCESS; if (!WindowsUserManager.LookupAccountSid(null, SID, name, ref cchName, referencedDomainName, ref cchReferencedDomainName, out sidUse)) { err = Marshal.GetLastWin32Error(); if (err == (int)ESystemError.ERROR_INSUFFICIENT_BUFFER) { name.EnsureCapacity((int)cchName); referencedDomainName.EnsureCapacity((int)cchReferencedDomainName); err = WindowsUserManager.LookupAccountSid(null, SID, name, ref cchName, referencedDomainName, ref cchReferencedDomainName, out sidUse) ? (int)ESystemError.ERROR_SUCCESS : Marshal.GetLastWin32Error(); } } if (err != (int)ESystemError.ERROR_SUCCESS) throw new ApplicationException(String.Format("Could not retrieve acount name from SID. {0}", SystemExceptionManager.GetDescription(err))); return String.Format(@"{0}\{1}", referencedDomainName.ToString(), name.ToString()); } catch (Exception ex) { if (ex is ApplicationException) throw ex; throw new ApplicationException("Could not retrieve acount name from SID", ex); } } private enum SID_NAME_USE { SidTypeUser = 1, SidTypeGroup, SidTypeDomain, SidTypeAlias, SidTypeWellKnownGroup, SidTypeDeletedAccount, SidTypeInvalid, SidTypeUnknown, SidTypeComputer } [DllImport("advapi32.dll", EntryPoint = "GetLengthSid", CharSet = CharSet.Auto)] private static extern int GetLengthSid(IntPtr pSID); [DllImport("advapi32.dll", SetLastError = true)] private static extern bool ConvertStringSidToSid( string StringSid, out IntPtr ptrSid); [DllImport("advapi32.dll", CharSet = CharSet.Auto, SetLastError = true)] private static extern bool LookupAccountSid( string lpSystemName, [MarshalAs(UnmanagedType.LPArray)] byte[] Sid, StringBuilder lpName, ref uint cchName, StringBuilder ReferencedDomainName, ref uint cchReferencedDomainName, out SID_NAME_USE peUse); private static bool LookupAccountSid( string lpSystemName, string stringSid, StringBuilder lpName, ref uint cchName, StringBuilder ReferencedDomainName, ref uint cchReferencedDomainName, out SID_NAME_USE peUse) { byte[] SID = null; IntPtr SID_ptr = IntPtr.Zero; try { WindowsUserManager.ConvertStringSidToSid(stringSid, out SID_ptr); int err = SID_ptr == IntPtr.Zero ? Marshal.GetLastWin32Error() : (int)ESystemError.ERROR_SUCCESS; if (SID_ptr == IntPtr.Zero || err != (int)ESystemError.ERROR_SUCCESS) throw new ApplicationException(String.Format("'{0}' could not be converted to a SID byte array. {1}", stringSid, SystemExceptionManager.GetDescription(err))); int size = (int)GetLengthSid(SID_ptr); SID = new byte[size]; Marshal.Copy(SID_ptr, SID, 0, size); } catch (Exception ex) { if (ex is ApplicationException) throw ex; throw new ApplicationException(String.Format("'{0}' could not be converted to a SID byte array. {1}.", stringSid, ex.Message), ex); } finally { // Always want to release the SID_ptr (if it exists) to avoid memory leaks. if (SID_ptr != IntPtr.Zero) Marshal.FreeHGlobal(SID_ptr); } return WindowsUserManager.LookupAccountSid(lpSystemName, SID, lpName, ref cchName, ReferencedDomainName, ref cchReferencedDomainName, out peUse); } }

    Read the article

  • How to control the volume of a media player using jquery / javascript

    - by Geetha
    Hi All, I am using the following code for media player in asp.net page. Code: <object id="mediaPlayer" classid="clsid:22D6F312-B0F6-11D0-94AB-0080C74C7E95" codebase="http://activex.microsoft.com/activex/controls/mplayer/en/nsmp2inf.cab#Version=5,1,52,701" height="1" standby="Loading Microsoft Windows Media Player components..." type="application/x-oleobject" width="1"> <param name="fileName" value="" /> <param name="animationatStart" value="true" /> <param name="transparentatStart" value="true" /> <param name="autoStart" value="true" /> <param name="showControls" value="true" /> <param name="volume" value="70" /> </object> Problem: 1. How to set the default value for volume. [I have set it as 70 but showing 40] 2. If volume is zero the system volume also be zero.

    Read the article

  • RegEx match open tags except XHTML self-contained tags

    - by Jeff
    I need to match all of these opening tags: <p> <a href="foo"> But not these: <br /> <hr class="foo" /> I came up with this and wanted to make sure I've got it right. I am only capturing the a-z. <([a-z]+) *[^/]*?> I believe it says: Find a less-than, then Find (and capture) a-z one or more times, then Find zero or more spaces, then Find any character zero or more times, greedy, except /, then Find a greater-than Do I have that right? And more importantly, what do you think? =) EDIT: Hmm, which answer to mark as correct? For the record, ALL the answers are appreciated. Many thanks!

    Read the article

  • pchart pie chart legend and graph not correlating

    - by madphp
    Hi, I have ten values in the dataset, numbers 1 - 10 and corresponding values. Some of the values are coming back as zero, so they are not added to the chart, BUT, the legend is still listing 1 - 10. Because theres values missing in the chart, the colour coding is knocked off. ie Item 1, has a value of zero, its passed over in the chart, the colour in the legend is red, Item 2, has a value of 4, the percentage is calculated, and the chart gives it the colour red which is the colour for item 1 in the legend. Hope that makes sense. How can I print the legend just for the values that are displayed in the chart? --Mark

    Read the article

  • F# Static Member Type Constraints

    - by Stephen Swensen
    I'm trying to define a function, factorize, which uses structural type constraints (requires static members Zero, One, +, and /) similar to Seq.sum so that it can be used with int, long, bigint, etc. I can't seem to get the syntax right, and can't find a lot of resources on the subject. This is what I have, please help. let inline factorize (n:^NUM) = ^NUM : (static member get_Zero: unit->(^NUM)) ^NUM : (static member get_One: unit->(^NUM)) let rec factorize (n:^NUM) (j:^NUM) (flist: ^NUM list) = if n = ^NUM.One then flist elif n % j = ^NUM.Zero then factorize (n/j) (^NUM.One + ^NUM.One) (j::flist) else factorize n (j + ^NUM.One) (flist) factorize n (^NUM.One + ^NUM.One) []

    Read the article

  • WPF WIN32 hwndhost WM_MOUSEMOVE WM_MOUSEHOVER

    - by Neil B
    I have a WPF app with a usercontrol that contains a HwndHost. The HwndHost is created as follows: hwndHost = CreateWindowEx(0, "static", "", WS_CHILD | WS_VISIBLE, 0, 0, hostHeight, hostWidth, hwndParent.Handle, (IntPtr)HOST_ID, IntPtr.Zero, 0); hwndControl = CreateWindowEx(0, "Static", "", WS_CHILD | WS_VISIBLE | WS_CLIPCHILDREN , 0, 0, hostHeight, hostWidth, hwndHost, (IntPtr)PICTUREBOX_ID, IntPtr.Zero, 0); I then hook into the message pump using HwndSourceHook and loads of messages come through. Except the ones I want i.e. WM_MOUSEMOVE, WM_MOUSEHOVER, WM_LBUTTONDOWN and WM_LBUTTONUP Also the OnMouseLeftButtonDown event is not fired in the WPF code on the main window or the control, I assume because windows is trapping it and throwing it away. Anybody know how I can get these to come through, either with or without using the WIN32 window messages?

    Read the article

  • Skype Raw API (NOT COM API) send message problem

    - by Mike Trader
    In converting this CONSOLE example to a full windows dialog implementation I have run into a very "simple problem". SendMessage() (line 283) is returning zero, GetLastError reveals 0x578 - Invalid window handle. http://read.pudn.com/downloads51/sourcecode/windows/multimedia/175678/msgapitest.cpp__.htm (https://developer.skype.com/Download/Sample...example_win.zip) C++ 2005 Studio express edition instructions http://forum.skype.com/index.php?showtopic=54549 The previous call using HWND_BROADCAST works and Skype replies as expected, so I know Skype is installed and working properly. The handle I use is the wParam value from the Skype Reply message, as in the code. This is non zero, but I am not sure if there is a way to test it other than with SendMessage. The compiled app from this C++ code example (see zip download) does actually work so I am stumped. I do encode the message with UTF8, and I create an instance of the COPYDATASTRUCT in my app, populate it then call SendMessage() with the COPYDATASTRUCT pointer in lparam. Skype does not respond nor does it obey. Am I missing something obvious here?

    Read the article

  • UIWebView - get total height of contents using Javascript

    - by Emil
    Hey. I'm trying to use a UIWebView for displaying content higher than the screen of the iPhone, without needing to scroll in the webView itself. For that, I need a way to get the total document size, including the scrollable area. I have tried a number of different Javascript solutions: (document.height !== undefined) ? document.height : document.body.offsetHeight // Returns height of UIWebView document.body.offsetHeight // Returns zero document.body.clientHeight // Returns zero document.documentElement.clientHeight // Returns height of UIWebView window.innerHeight // Returns height of UIWebView -2 Can you think of any other way to do it? Thanks.

    Read the article

  • Help make sense of a KillDisk error/log

    - by user284194
    I have a hard drive that I've been trying to reformat. I tried reformatting it in the windows XP and 7 installers, and in an Ubuntu live cd with gparted. I tried using dd to 'zero' the drive as well with no success. Finally I ran across KillDisk after a search. I tried to zero the disk again with KillDisk and after 8 hours of zeroing I get the following errors in the log: ----------------------------------------Erase Session Begin--------------------------------------- 2010-03-23 19:35:54 Active@ KILLDISK for Windows Build 5.1.39 started Target: WDC WD2500KS-00MJB0 232.9 GB Located on: WDC WD2500KS-00MJB0 (Serial number: WD-WCANK9604799) Erase method: One Pass Zeros (1 pass) Passes: 1 Bad (unwritable) sectors detected from 1701 to 488397167 on Hard Disk 1. Error (the handle is invalid) refreshing device Hard Disk 1. Error (the handle is invalid) reading sector 0 on 81h. 2010-03-24 02:28:25 Total number of erased device(s): 0, partition(s): 0 -----------------------------------------Erase Session End---------------------------------------- Is the drive dead?

    Read the article

  • Refresh Windows Explorer in Win7

    - by Paja
    My program sets "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" value "Hidden". Hovewer I'm not able to refresh the explorer to take into account this change. I've tried: 1) SHChangeNotify(SHCNE_ASSOCCHANGED, SHCNF_IDLIST, IntPtr.Zero, IntPtr.Zero);` 2) SHELLSTATE state = new SHELLSTATE(); state.fShowAllObjects = (uint)1; SHGetSetSettings(ref state, SSF.SSF_SHOWALLOBJECTS, true); 3) SendMessageTimeout(HWND_BROADCAST, WM_SETTINGCHANGE, SPI_SETNONCLIENTMETRICS, 0, SMTO_ABORTIFHUNG, 5000, ref dwResult); 4) SendMessage(HWND_BROADCAST, WM_COMMAND, 28931 /* Refresh */, 0); Nothing works. So what should I do? If I refresh Explorer myself with F5, then it works. Hovewer I would like some elegant solution, so it would refresh the display everywhere, even in OpenFile/SaveFile dialogs, which are currently open. I'm using C# .NET, Win7.

    Read the article

  • Win C#: Refresh Windows Explorer in Win7

    - by Paja
    Hello, My program sets "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" value "Hidden". Hovewer I'm not able to refresh the explorer to take into account this change. I've tried: 1) SHChangeNotify(SHCNE_ASSOCCHANGED, SHCNF_IDLIST, IntPtr.Zero, IntPtr.Zero); 2) SHELLSTATE state = new SHELLSTATE(); state.fShowAllObjects = (uint)1; SHGetSetSettings(ref state, SSF.SSF_SHOWALLOBJECTS, true); 3) SendMessageTimeout(HWND_BROADCAST, WM_SETTINGCHANGE, SPI_SETNONCLIENTMETRICS, 0, SMTO_ABORTIFHUNG, 5000, ref dwResult); 4) SendMessage(HWND_BROADCAST, WM_COMMAND, 28931 /* Refresh */, 0); Nothing works. So what should I do? If I refresh Explorer myself with F5, then it works. Hovewer I would like some elegant solution, so it would refresh the display everywhere, even in OpenFile/SaveFile dialogs, which are currently open. I'm using C# .NET, Win7. Thank you.

    Read the article

  • Unit testing several implementation of the same trait/interface

    - by paradigmatic
    I program mostly in scala and java, using scalatest in scala and junit for unit testing. I would like to apply the very same tests to several implementations of the same interface/trait. The idea is to verify that the interface contract is enforced and to check Liskov substitution principle. For instance, when testing implementations of lists, tests could include: An instance should be empty, if and only if and only if it has zero size. After calling clear, the size sould be zero. Adding an element in the middle of a list, will increment by one the index of rhs elements. etc. What are the best practices ?

    Read the article

  • Getting the battery current values for the Android Phone

    - by themangoman
    I am trying to collect power usage statistics for the Android G1 Phone. I am interested in knowing the values of Voltage and Current, and then able to collect statistics as reported in this PDF. I am able to get the value of Battery voltage through registering for an intent receiver to receive the Broadcast for ACTION_BATTERY_CHANGED. But the problem is that Android does not expose the value of current through this SDK interface. One way I tried is via sysfs interface, where I can view the battery current value from adb shell, using the following command $cat /sys/class/power_supply/battery/batt_current 449 But that too works only if the phone is connected via USB interface. If I disconnect the phone, I see the value of batt_current as '0'. I am not sure why the value of current reported is zero. It should be more than zero, right? Any suggestion / pointers for getting battery current value? Also please correct me if I am wrong.

    Read the article

  • iPhone metering problems

    - by Eric Christensen
    When I'm recording an AVAudioRecorder object, I repeat a chunk of code via an NSTimer that includes: [soundrecording updateMeters]; NSLog(@"channel 0 average:%f, peak:%f",[soundrecording averagePowerForChannel:0],[soundrecording peakPowerForChannel:0]); NSLog(@"channel 1 average:%f, peak:%f",[soundrecording averagePowerForChannel:1],[soundrecording peakPowerForChannel:1]); When I'm recording a mono file, the peak power for channel 0 is just what you'd expect, a float from -160 to 0. But average power for channel 0 is always zero. (And, of course, the values for channel 1 are both zero.) When I'm recording a stereo file, both the average and peak values for both channels are as expected. Any thoughts on why, when recording a mono file, the average value for channel 0 isn't returning correctly, even though the peak is? Thanks!

    Read the article

  • Change NSNumber value by allocating new NSNumber?

    - by Peter Hajas
    I understand that NSNumber is immutable, but I still have the need to change it in my app. I use it because it's an object, and therefore usable with @property (if I could, I would use float or CGFloat in a heartbeat, but sadly, I can't). Is there any way to just overwrite the old NSNumber instance? I'm trying this: NSNumber *zero = [[NSNumber alloc] initWithFloat:0.0]; myNSNumber = zero but this doesn't change the value. This is a simplified version of my code, as I'm changing the root view controller's parameter (I know, not MVC-friendly). Still, the changing of the value should be the same assignment, right? Should I release myNSNumber first? What should I set the @property at for myNSNumber? Thanks!

    Read the article

  • Adding info to an exception

    - by NoozNooz42
    I'd like to add information to a stack trace/exception. Basically I've got something like this as of now, which I really like: Exception in thread "main" java.lang.ArithmeticException: / by zero at com.so.main(SO.java:41) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke However I'd like to catch that exception and add additional info to it, while still having the original stack trace. For example, I'd like to have that: Exception in thread "main" CustomException: / by zero (you tried to divide 42 by 0) at com.so.main(SO.java:41) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke So basically I want to catch the ArithmeticException and rethrow, say, a CustomException (adding "you tried to divide 42 by 0" in this example) while still keeping the stacktrace from the original ArithmeticException. What is the correct way to do this in Java? Is the following correct: try { .... } catch (ArithmeticException e) { throw new CustomException( "You tried to divide " + x + " by " + y, e ); }

    Read the article

  • Regex question: Why isn't this matching?

    - by AllenG
    I have the following regex: (?<=\.\d+?)0+(?=\D|$) I'm running it against a string which contains the following: SVC~NU^0270~313.3~329.18~~10~~6.00: When it runs, it matches the 6.00 (correctly) which my logic then trims by one zero to turn into 6.0. The regex then runs again (or should) but fails to pick up the 6.0. I'm by no means an expert on Regex, but my understanding of my expression is that it's looking for a decimal with 1 or more optional (so, really zero or more) digits prior to one or more zeros which are then followed by any non-digit character or the line break. Assuming that interpretation is correct, I can't see why it wouldn't match on the second pass. For that matter, I'm not sure why my Regex.Replace isn't matching the full 6.00 on the first pass and removing both of the trailing zeros... Any suggestions?

    Read the article

  • Rotation Interpolation

    - by Rob
    Hello, NB: I'll present this question in degrees purely for simplicity, radians, degrees, different zero-bearing, the problem is essentially the same. Does anyone have any ideas on the code behind rotational interpolation? Given a linear interpolation function: Lerp(from, to, amount), where amount is 0...1 which returns a value between from and to, by amount. How could I apply this same function to a rotational interpolation between 0 and 360 degrees? Given that degrees should not be returned outside 0 and 360. Given this unit circle for degrees: where from = 45 and to = 315, the algorithm should take the shortest path to the angle, i.e. it should go through zero, to 360 and then to 315 - and not all the way round 90, 180, 270 to 315. Is there a nice way to achieve this? Or is it going to just be a horrid mess of if() blocks? Am I missing some well understood standard way of doing this? Any help would be appreciated.

    Read the article

  • how i got the name of the string variable in the strange attempt to debug unknown variable ?

    - by justjoe
    i got several variable. One is variable string, object, and array. $mystring = "hello im input"; $myobject = new userclass; $myarray = array ( 0 = 'zero', 1 = "one"); i want to create a new array with its variable name as key before send it to as function parameter with it's first line use extract function. the multi_array will be like this multi_array = array ( 'mystring' = "hello im input", 'myobject' = new userclass, 'myarray' = array ( 0 = 'zero', 1 = "one") ) i use key to get the name of array and getclass to get the name of object. But how i got the name of the string variable ? function i_do_extract($multi_array) { extract($multi_array); // Do Rest }

    Read the article

  • Why does mysqldump need to be fully pathed when called from a controller or model?

    - by Kris
    When I call mysqldump from a controller or model I need to fully path the binary, when I call it from Rake I don't need to. If I do not fully path I get a zero byte file... I can confirm both processes are run using the same user. # Works in a controller, model and Rake task system "/usr/local/mysql/bin/mysqldump -u root #{w.database_name} > #{target_file}" # Only works in a Rake task system "mysqldump -u root #{w.database_name} > #{target_file}" If I call the Rake task from the action it also fails (zero byte file). OS: Mac Ruby 1.8.6 EDIT: I use Etc.getpwuid(Process.uid).name to get the User of the current process

    Read the article

< Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >