Search Results

Search found 89718 results on 3589 pages for 'code blocks'.

Page 410/3589 | < Previous Page | 406 407 408 409 410 411 412 413 414 415 416 417  | Next Page >

• So&hellip; What is a SharePoint Developer?

  - by Mark Rackley

  A few days ago Stacy Draper and I were chatting about what it means to be a SharePoint Developer. That actually turns about to be a conversation with lots of shades of grey. Stacy thought it would make a good blog post… well, I can’t promise this to be a GOOD blog post… So, anyway, I decided to let off a little bomb this morning by posting the following tweet on Twitter: @mrackley: Can someone be considered a SharePoint Developer if all they know how to do is work in SPD? Now, I knew this is a debate that has been going on since the first SharePoint Designer User put SharePoint Developer on their resume. There are probably several blogs out there on the subject, but with the wildfire that is jQuery and a few other new features out there I believe it is an important subject to tackle again. I got a lot of great feedback as well on Twitter. The entire twitter conversation is at the end of this blog posting. Thanks everyone for their opinions. Who cares? Why does it matter? Can’t we all just get along? Yes it matters… everything must be labeled and put in it’s proper place. Pigeon holing is the only way to go!  Just kidding.. I’m not near that anal, but yes! It is important to be able to properly identify the skill set of those people on your team and correctly identify the role you are wanting to hire. Saying you are a “SharePoint Developer” is just too vague and just barely begins to answer the question. Also, knowing who’s on your team and what they can do will ensure you give your clients the best people for the job. A Developer writes code right? So, a Developer uses Visual Studio! Whoa, hold on there Sparky. Even if I concede that to be a developer you have to write code then you still can’t say a SharePoint Developer has to use Visual Studio.  So, you can spell C#, how well can you write XSLT? How’s your jQuery? Sorry bud, that’s code whether you like it or not. There are many ways to write code in SharePoint that have nothing to do with cracking open Visual Studio. So, what are the different ways to develop in SharePoint then? How many different ways can you “develop” in SharePoint?? A lot… Out of the box features In SharePoint you can create a site, create a custom list on that site, do basic calculations in a calculated column, set up alerts, and add all sorts of web parts to a page. Let’s face it.. that IS development! javaScript/jQuery Perhaps you’ve heard by now about this thing called jQuery? It’s all over the place and the answer to a lot of people’s prayers. However be careful, with great power comes great responsibility. Remember, javaScript is executed on the client side and if you abuse it your performance could be affected. Also, Marc Anderson (@sympmarc) wrote a pretty awesome javaScript library called SPServices.  This allows you to access SharePoint’s Web Services using jQuery. How freakin cool is that? With these tools at your disposal the number of things you CAN’T do without Visual Studio grows smaller and smaller. This is definitely development no matter what anyone else says and there is no Visual Studio involved. SharePoint Designer Ahhh.. The cause of and the answer to all of your SharePoint development problems. With SharePoint Designer you can use DataView Web Parts, develop (there’s that word again) your branding, and even connect to external datasources.  There’s a lot you can do in SharePoint Designer. It’s got it’s shortcomings, but it is an invaluable tool in the SharePoint developers toolbox. InfoPath So, can InfoPath development really be considered SharePoint development? I would say yes. You can connect to SharePoint lists, populate fields in a SharePoint list, and even write code in InfoPath. Sounds like SharePoint development to me. Visual Studio – Web Services/WCF So, get this. You can write code for SharePoint and not have a clue what the 12 hive is, what “site actions” means, or know how to do ANYTHING in SharePoint? Poppycock! You say? SharePoint Web Services I say… With SharePoint Web Services you can totally interact with SharePoint without knowing anything about SharePoint. I don’t recommend it of course, but it’s possible. What can you write using SharePoint Web Services? How about a little application called SharePoint Designer? Visual Studio – Object Model And here we are finally:  the SharePoint Object Model.  When you hear “SharePoint Developer” most people think of someone opening Visual Studio and creating a custom web part, workflow, event receiver, etc.. etc.. but I hope that by now I have made the point that this is NOT the only form of SharePoint Development! Again… Who cares? Just crack open Visual Studio for everything! Problem solved! Let’s ponder for a moment, shall we? The business comes to you with a requirement that involves some pretty fancy business calculations, and a complicated view that they do NOT want to look like SharePoint. “No Problem” you proclaim you mighty SharePoint Developer. You go back to your cube, chuckle at the latest Dilbert comic, and crack open Visual Studio. Then you build your custom web part… fight with all the deployment, migration, and UAT that you must go through and proclaim victory two weeks later!!!! Well done my good sir/ma’am! Oh wait… it turns out Sally who is not a “developer” did the exact same thing with a Dataview web part and some jQuery and it’s been in production for two weeks? #CockinessFail I know there are many ASP.NET developers out there that can create a custom control and wrap it to be a SharePoint Web Part.  That does NOT mean they are SharePoint Developers though as far as I’m concerned and I personally would much rather have someone on my team that can manipulate the heck (yes, I said ‘heck’) out of SharePoint using Dataview Web Parts, jQuery, and a roll of duct tape. Just because you know how to write code in Visual Studio does not mean you are a SharePoint Developer. What’s the conclusion here? How do we define ‘it’ and what ‘it’ is called? Fortunately, this is MY blog. I don’t have to give answers, I can stir the pot, laugh and leave you to ponder what it means! There is obviously no right or wrong answer here (unless you disagree with me,then you are flat out wrong). Anyway, there are many opinions.  Here’s mine.  If you put SharePoint Developer on your resume make sure to clearly specify HOW you develop in SharePoint and what tools you use. If we must label these gurus of jQuery and SPD, how about “SharePoint Client Developer” or “SharePoint Front End Developer”? Just throwing out an idea. Whatever we call them, to say they are not developers is short-sighted, arrogant, and unfair. Of course, then we need to figure out what to call all those other SharePoint development types.  Twitter Conversation @next_connect: RT @mrackley: Can someone be considered a SharePoint Developer if all they know how to do is work in SPD? | I say no.... @mikegil:  @mrackley re: yr Developer question: SPD expert <> SP Developer. Can be "sous-developer," though. #SharePoint #SPD @WonderLaura:  Rt @mrackley Can someone be considered a SharePoint Dev if all they know how to do is work in SPD? -- My opinion is that devs write code. @exnav29:  Rt @mrackley Can someone be considered a SharePoint Dev if all they know how to do is work in SPD? => I think devs would use VS as well @ssKevin:  @WonderLaura @mrackley does that mean strictly vb and c# when it comes to #SharePoint ? @jimmywim:  @exnav29 @mrackley nah, I'd say they were a power user. Devs know their way around the 12 hive ;) @sympmarc:  RT @mrackley: Can someone be considered a SharePoint Developer if all they know how to do is work in SPD? -> Fighting words. @sympmarc:  @next_connect @mrackley Besides, we prefer to be called "hacks". ;+) @next_connect:  @sympmarc The important thing is that you don't have to develop code to solve problems and create solutions. @mrackley @mrackley:  @sympmarc @next_connect not tryin to pick fight.. just try and find consensus on definition @usher:  @mrackley I'd still argue that you have a DevLite title that's out there for the collaboration engineers (@sympmarc @next_connect) @next_connect: @usher I agree. I've called it Light Dev/ Configuration before. @sympmarc @mrackley @usher:  @next_connect I like DevLite, low calorie but still same great taste :) @mrackley @sympmarc @mrackley:  @next_connect @usher @sympmarc I don't think there's any "lite" to someone who can bend jQuery and XSLT to their will. @usher:  @mrackley okay, so would you refer to someone that writes user controls and assemblies something different (@next_connect @sympmarc) @usher:  @mrackley when looking for a developer that can write .net code, it's a bit different than an XSLT/jQuery designer. @sympmarc @next_connect @jimmywim:  @mrackley @sympmarc @next_connect I reckon a "dev" does managed code and works in the 12 hive @sympmarc:  @jimmywim @mrackley @next_connect We had a similar debate a few days ago @toddbleeker et al @sympmarc:  @sympmarc @jimmywim @mrackley @next_connect @toddbleeker @stevenmfowler More abt my Middle Tier term, but still connected. Meet bus need. @toddbleeker:  @sympmarc @jimmywim @mrackley @next_connect I used "No Assembly Required" in the past. I also suggested "Supplimenting the SharePoint DOM" @toddbleeker:  @sympmarc @jimmywim @mrackley @next_connect Others suggested Information Worker Solutions/Enhancements @toddbleeker:  @sympmarc @jimmywim @mrackley @next_connect @stevenmfowler I also like "SharePoint Scripting Solutions". All the technologies are script. @jimmywim:  @toddbleeker @sympmarc @mrackley @next_connect I like the IW solutions one... @toddbleeker:  @sympmarc @jimmywim @mrackley @next_connect @stevenmfowler This is like the debate that never ends: it is definitely not called Middle Tier. @jimmywim:  @toddbleeker @sympmarc @mrackley @next_connect @stevenmfowler "Scripting" these days makes me think PowerShell... @sympmarc:  @toddbleeker @jimmywim @mrackley @next_connect @stevenmfowler If it forces a debate on h2 best solve bus probs, I'll keep sayin Middle Tier. @usher:  @sympmarc so we know what we're looking for, we just can't define a name? @toddbleeker @jimmywim @mrackley @next_connect @stevemfowler @sympmarc:  @usher @sympmarc @toddbleeker @jimmywim @mrackley @next_connect @stevemfowler The naming seems to matter more than the substance. :-( @jimmywim:  @sympmarc @usher @toddbleeker @mrackley @next_connect @stevemfowler work brkdn defines tasks, defines tools needed, can then b grp'd by user @WonderLaura:  @mrackley @toddbleeker @jimmywim @sympmarc @usher @next_connect Funny you're asking. @johnrossjr and I spent hours this week on the subject. @stevenmfowler:  RT @toddbleeker: @sympmarc @jimmywim @mrackley @next_connect @stevenmfowler it is definitely not called Middle Tier. < I'm with Todd

  Read the article

• The Incremental Architect&acute;s Napkin - #2 - Balancing the forces

  - by Ralf Westphal

  Originally posted on: http://geekswithblogs.net/theArchitectsNapkin/archive/2014/06/02/the-incremental-architectacutes-napkin---2---balancing-the-forces.aspxCategorizing requirements is the prerequisite for ecconomic architectural decisions. Not all requirements are created equal. However, to truely understand and describe the requirement forces pulling on software development, I think further examination of the requirements aspects is varranted. Aspects of Functionality There are two sides to Functionality requirements. It´s about what a software should do. I call that the Operations it implements. Operations are defined by expressions and control structures or calls to frameworks of some sort, i.e. (business) logic statements. Operations calculate, transform, aggregate, validate, send, receive, load, store etc. Operations are about behavior; they take input and produce output by considering state. I´m not using the term “function” here, because functions - or methods or sub-programs - are not necessary to implement Operations. Functions belong to a different sub-aspect of requirements (see below). Operations alone are not enough, though, to make a customer happy with regard to his/her Functionality requirements. Only correctly implemented Operations provide full value. This should make clear, why testing is so important. And not just manual tests during development of some operational feature, but automated tests. Because only automated tests scale when over time the number of operations increases. Without automated tests there is no guarantee formerly correct operations are still correct after more got added. To retest all previous operations manually is infeasible. So whoever relies just on manual tests is not really balancing the two forces Operations and Correctness. With manual tests more weight is put on the side of the scale of Operations. That might be ok for a short period of time - but in the long run it will bite you. You need to plan for Correctness in the long run from the first day of your project on. Aspects of Quality As important as Functionality is, it´s not the driver for software development. No software has ever been written to just implement some operation in code. We don´t need computers just to do something. All computers can do with software we can do without them. Well, at least given enough time and resources. We could calculate the most complex formulas without computers. We could do auctions with millions of people without computers. The only reason we want computers to help us with this and a million other Operations is… We don´t want to wait for the results very long. Or we want less errors. Or we want easier accessability to complicated solutions. So the main reason for customers to buy/order software is some Quality. They want some Functionality with a higher Quality (e.g. performance, scalability, usability, security…) than without the software. But Qualities come in at least two flavors: Most important are Primary Qualities. That´s the Qualities software truely is written for. Take an online auction website for example. Its Primary Qualities are performance, scalability, and usability, I´d say. Auctions should come within reach of millions of people; setting up an auction should be very easy; finding a suitable auction and bidding on it should be as fast as possible. Only if those Qualities have been implemented does security become relevant. A secure auction website is important - but not as important as a fast auction website. Nobody would want to use the most secure auction website if it was unbearably slow. But there would be people willing to use the fastest auction website even it was lacking security. That´s why security - with regard to online auction software - is not a Primary Quality, but just a Secondary Quality. It´s a supporting quality, so to speak. It does not deliver value by itself. With a password manager software this might be different. There security might be a Primary Quality. Please get me right: I don´t want to denigrate any Quality. There´s a long list of non-functional requirements at Wikipedia. They are all created equal - but that does not mean they are equally important for all software projects. When confronted with Quality requirements check with the customer which are primary and which are secondary. That will help to make good economical decisions when in a crunch. Resources are always limited - but requirements are a bottomless ocean. Aspects of Security of Investment Functionality and Quality are traditionally the requirement aspects cared for most - by customers and developers alike. Even today, when pressure rises in a project, tunnel vision will focus on them. Any measures to create and hold up Security of Investment (SoI) will be out of the window pretty quickly. Resistance to customers and/or management is futile. As long as SoI is not placed on equal footing with Functionality and Quality it´s bound to suffer under pressure. To look closer at what SoI means will help to become more conscious about it and make customers and management aware of the risks of neglecting it. SoI to me has two facets: Production Efficiency (PE) is about speed of delivering value. Customers like short response times. Short response times mean less money spent. So whatever makes software development faster supports this requirement. This must not lead to duct tape programming and banging out features by the dozen, though. Because customers don´t just want Operations and Quality, but also Correctness. So if Correctness gets compromised by focussing too much on Production Efficiency it will fire back. Customers want PE not just today, but over the whole course of a software´s lifecycle. That means, it´s not just about coding speed, but equally about code quality. If code quality leads to rework the PE is on an unsatisfactory level. Also if code production leads to waste it´s unsatisfactory. Because the effort which went into waste could have been used to produce value. Rework and waste cost money. Rework and waste abound, however, as long as PE is not addressed explicitly with management and customers. Thanks to the Agile and Lean movements that´s increasingly the case. Nevertheless more could and should be done in many teams. Each and every developer should keep in mind that Production Efficiency is as important to the customer as Functionality and Quality - whether he/she states it or not. Making software development more efficient is important - but still sooner or later even agile projects are going to hit a glas ceiling. At least as long as they neglect the second SoI facet: Evolvability. Delivering correct high quality functionality in short cycles today is good. But not just any software structure will allow this to happen for an indefinite amount of time.[1] The less explicitly software was designed the sooner it´s going to get stuck. Big ball of mud, monolith, brownfield, legacy code, technical debt… there are many names for software structures that have lost the ability to evolve, to be easily changed to accomodate new requirements. An evolvable code base is the opposite of a brownfield. It´s code which can be easily understood (by developers with sufficient domain expertise) and then easily changed to accomodate new requirements. Ideally the costs of adding feature X to an evolvable code base is independent of when it is requested - or at least the costs should only increase linearly, not exponentially.[2] Clean Code, Agile Architecture, and even traditional Software Engineering are concerned with Evolvability. However, it seems no systematic way of achieving it has been layed out yet. TDD + SOLID help - but still… When I look at the design ability reality in teams I see much room for improvement. As stated previously, SoI - or to be more precise: Evolvability - can hardly be measured. Plus the customer rarely states an explicit expectation with regard to it. That´s why I think, special care must be taken to not neglect it. Postponing it to some large refactorings should not be an option. Rather Evolvability needs to be a core concern for every single developer day. This should not mean Evolvability is more important than any of the other requirement aspects. But neither is it less important. That´s why more effort needs to be invested into it, to bring it on par with the other aspects, which usually are much more in focus. In closing As you see, requirements are of quite different kinds. To not take that into account will make it harder to understand the customer, and to make economic decisions. Those sub-aspects of requirements are forces pulling in different directions. To improve performance might have an impact on Evolvability. To increase Production Efficiency might have an impact on security etc. No requirement aspect should go unchecked when deciding how to allocate resources. Balancing should be explicit. And it should be possible to trace back each decision to a requirement. Why is there a null-check on parameters at the start of the method? Why are there 5000 LOC in this method? Why are there interfaces on those classes? Why is this functionality running on the threadpool? Why is this function defined on that class? Why is this class depending on three other classes? These and a thousand more questions are not to mean anything should be different in a code base. But it´s important to know the reason behind all of these decisions. Because not knowing the reason possibly means waste and having decided suboptimally. And how do we ensure to balance all requirement aspects? That needs practices and transparency. Practices means doing things a certain way and not another, even though that might be possible. We´re dealing with dangerous tools here. Like a knife is a dangerous tool. Harm can be done if we use our tools in just any way at the whim of the moment. Over the centuries rules and practices have been established how to use knifes. You don´t put them in peoples´ legs just because you´re feeling like it. You hand over a knife with the handle towards the receiver. You might not even be allowed to cut round food like potatos or eggs with it. The same should be the case for dangerous tools like object-orientation, remote communication, threads etc. We need practices to use them in a way so requirements are balanced almost automatically. In addition, to be able to work on software as a team we need transparency. We need means to share our thoughts, to work jointly on mental models. So far our tools are focused on working with code. Testing frameworks, build servers, DI containers, intellisense, refactoring support… That´s all nice and well. I don´t want to miss any of that. But I think it´s not enough. We´re missing mental tools, tools for making thinking and talking about software (independently of code) easier. You might think, enough of such tools already exist like all those UML diagram types or Flow Charts. But then, isn´t it strange, hardly any team is using them to design software? Or is that just due to a lack of education? I don´t think so. It´s a matter value/weight ratio: the current mental tools are too heavy weight compared to the value they deliver. So my conclusion is, we need lightweight tools to really be able to balance requirements. Software development is complex. We need guidance not to forget important aspects. That´s like with flying an airplane. Pilots don´t just jump in and take off for their destination. Yes, there are times when they are “flying by the seats of their pants”, when they are just experts doing thing intuitively. But most of the time they are going through honed practices called checklist. See “The Checklist Manifesto” for very enlightening details on this. Maybe then I should say it like this: We need more checklists for the complex businss of software development.[3] But that´s what software development mostly is about: changing software over an unknown period of time. It needs to be corrected in order to finally provide promised operations. It needs to be enhanced to provide ever more operations and qualities. All this without knowing when it´s going to stop. Probably never - until “maintainability” hits a wall when the technical debt is too large, the brownfield too deep. Software development is not a sprint, is not a marathon, not even an ultra marathon. Because to all this there is a foreseeable end. Software development is like continuously and foreever running… ? And sometimes I dare to think that costs could even decrease over time. Think of it: With each feature a software becomes richer in functionality. So with each additional feature the chance of there being already functionality helping its implementation increases. That should lead to less costs of feature X if it´s requested later than sooner. X requested later could stand on the shoulders of previous features. Alas, reality seems to be far from this despite 20+ years of admonishing developers to think in terms of reusability.[1] ? Please don´t get me wrong: I don´t want to bog down the “art” of software development with heavyweight practices and heaps of rules to follow. The framework we need should be lightweight. It should not stand in the way of delivering value to the customer. It´s purpose is even to make that easier by helping us to focus and decreasing waste and rework. ?

  Read the article

• ANTS Memory Profiler 7.0 Review

  - by Michael B. McLaughlin

  (This is my first review as a part of the GeeksWithBlogs.net Influencers program. It’s a program in which I (and the others who have been selected for it) get the opportunity to check out new products and services and write reviews about them. We don’t get paid for this, but we do generally get to keep a copy of the software or retain an account for some period of time on the service that we review. In this case I received a copy of Red Gate Software’s ANTS Memory Profiler 7.0, which was released in January. I don’t have any upgrade rights nor is my review guided, restrained, influenced, or otherwise controlled by Red Gate or anyone else. But I do get to keep the software license. I will always be clear about what I received whenever I do a review – I leave it up to you to decide whether you believe I can be objective. I believe I can be. If I used something and really didn’t like it, keeping a copy of it wouldn’t be worth anything to me. In that case though, I would simply uninstall/deactivate/whatever the software or service and tell the company what I didn’t like about it so they could (hopefully) make it better in the future. I don’t think it’d be polite to write up a terrible review, nor do I think it would be a particularly good use of my time. There are people who get paid for a living to review things, so I leave it to them to tell you what they think is bad and why. I’ll only spend my time telling you about things I think are good.) Overview of Common .NET Memory Problems When coming to land of managed memory from the wilds of unmanaged code, it’s easy to say to one’s self, “Wow! Now I never have to worry about memory problems again!” But this simply isn’t true. Managed code environments, such as .NET, make many, many things easier. You will never have to worry about memory corruption due to a bad pointer, for example (unless you’re working with unsafe code, of course). But managed code has its own set of memory concerns. For example, failing to unsubscribe from events when you are done with them leaves the publisher of an event with a reference to the subscriber. If you eliminate all your own references to the subscriber, then that memory is effectively lost since the GC won’t delete it because of the publishing object’s reference. When the publishing object itself becomes subject to garbage collection then you’ll get that memory back finally, but that could take a very long time depending of the life of the publisher. Another common source of resource leaks is failing to properly release unmanaged resources. When writing a class that contains members that hold unmanaged resources (e.g. any of the Stream-derived classes, IsolatedStorageFile, most classes ending in “Reader” or “Writer”), you should always implement IDisposable, making sure to use a properly written Dispose method. And when you are using an instance of a class that implements IDisposable, you should always make sure to use a 'using' statement in order to ensure that the object’s unmanaged resources are disposed of properly. (A ‘using’ statement is a nicer, cleaner looking, and easier to use version of a try-finally block. The compiler actually translates it as though it were a try-finally block. Note that Code Analysis warning 2202 (CA2202) will often be triggered by nested using blocks. A properly written dispose method ensures that it only runs once such that calling dispose multiple times should not be a problem. Nonetheless, CA2202 exists and if you want to avoid triggering it then you should write your code such that only the innermost IDisposable object uses a ‘using’ statement, with any outer code making use of appropriate try-finally blocks instead). Then, of course, there are situations where you are operating in a memory-constrained environment or else you want to limit or even eliminate allocations within a certain part of your program (e.g. within the main game loop of an XNA game) in order to avoid having the GC run. On the Xbox 360 and Windows Phone 7, for example, for every 1 MB of heap allocations you make, the GC runs; the added time of a GC collection can cause a game to drop frames or run slowly thereby making it look bad. Eliminating allocations (or else minimizing them and calling an explicit Collect at an appropriate time) is a common way of avoiding this (the other way is to simplify your heap so that the GC’s latency is low enough not to cause performance issues). ANTS Memory Profiler 7.0 When the opportunity to review Red Gate’s recently released ANTS Memory Profiler 7.0 arose, I jumped at it. In order to review it, I was given a free copy (which does not include upgrade rights for future versions) which I am allowed to keep. For those of you who are familiar with ANTS Memory Profiler, you can find a list of new features and enhancements here. If you are an experienced .NET developer who is familiar with .NET memory management issues, ANTS Memory Profiler is great. More importantly still, if you are new to .NET development or you have no experience or limited experience with memory profiling, ANTS Memory Profiler is awesome. From the very beginning, it guides you through the process of memory profiling. If you’re experienced and just want dive in however, it doesn’t get in your way. The help items GAHSFLASHDAJLDJA are well designed and located right next to the UI controls so that they are easy to find without being intrusive. When you first launch it, it presents you with a “Getting Started” screen that contains links to “Memory profiling video tutorials”, “Strategies for memory profiling”, and the “ANTS Memory Profiler forum”. I’m normally the kind of person who looks at a screen like that only to find the “Don’t show this again” checkbox. Since I was doing a review, though, I decided I should examine them. I was pleasantly surprised. The overview video clocks in at three minutes and fifty seconds. It begins by showing you how to get started profiling an application. It explains that profiling is done by taking memory snapshots periodically while your program is running and then comparing them. ANTS Memory Profiler (I’m just going to call it “ANTS MP” from here) analyzes these snapshots in the background while your application is running. It briefly mentions a new feature in Version 7, a new API that give you the ability to trigger snapshots from within your application’s source code (more about this below). You can also, and this is the more common way you would do it, take a memory snapshot at any time from within the ANTS MP window by clicking the “Take Memory Snapshot” button in the upper right corner. The overview video goes on to demonstrate a basic profiling session on an application that pulls information from a database and displays it. It shows how to switch which snapshots you are comparing, explains the different sections of the Summary view and what they are showing, and proceeds to show you how to investigate memory problems using the “Instance Categorizer” to track the path from an object (or set of objects) to the GC’s root in order to find what things along the path are holding a reference to it/them. For a set of objects, you can then click on it and get the “Instance List” view. This displays all of the individual objects (including their individual sizes, values, etc.) of that type which share the same path to the GC root. You can then click on one of the objects to generate an “Instance Retention Graph” view. This lets you track directly up to see the reference chain for that individual object. In the overview video, it turned out that there was an event handler which was holding on to a reference, thereby keeping a large number of strings that should have been freed in memory. Lastly the video shows the “Class List” view, which lets you dig in deeply to find problems that might not have been clear when following the previous workflow. Once you have at least one memory snapshot you can begin analyzing. The main interface is in the “Analysis” tab. You can also switch to the “Session Overview” tab, which gives you several bar charts highlighting basic memory data about the snapshots you’ve taken. If you hover over the individual bars (and the individual colors in bars that have more than one), you will see a detailed text description of what the bar is representing visually. The Session Overview is good for a quick summary of memory usage and information about the different heaps. You are going to spend most of your time in the Analysis tab, but it’s good to remember that the Session Overview is there to give you some quick feedback on basic memory usage stats. As described above in the summary of the overview video, there is a certain natural workflow to the Analysis tab. You’ll spin up your application and take some snapshots at various times such as before and after clicking a button to open a window or before and after closing a window. Taking these snapshots lets you examine what is happening with memory. You would normally expect that a lot of memory would be freed up when closing a window or exiting a document. By taking snapshots before and after performing an action like that you can see whether or not the memory is really being freed. If you already know an area that’s giving you trouble, you can run your application just like normal until just before getting to that part and then you can take a few strategic snapshots that should help you pin down the problem. Something the overview didn’t go into is how to use the “Filters” section at the bottom of ANTS MP together with the Class List view in order to narrow things down. The video tutorials page has a nice 3 minute intro video called “How to use the filters”. It’s a nice introduction and covers some of the basics. I’m going to cover a bit more because I think they’re a really neat, really helpful feature. Large programs can bring up thousands of classes. Even simple programs can instantiate far more classes than you might realize. In a basic .NET 4 WPF application for example (and when I say basic, I mean just MainWindow.xaml with a button added to it), the unfiltered Class List view will have in excess of 1000 classes (my simple test app had anywhere from 1066 to 1148 classes depending on which snapshot I was using as the “Current” snapshot). This is amazing in some ways as it shows you how in stark detail just how immensely powerful the WPF framework is. But hunting through 1100 classes isn’t productive, no matter how cool it is that there are that many classes instantiated and doing all sorts of awesome things. Let’s say you wanted to examine just the classes your application contains source code for (in my simple example, that would be the MainWindow and App). Under “Basic Filters”, click on “Classes with source” under “Show only…”. Voilà. Down from 1070 classes in the snapshot I was using as “Current” to 2 classes. If you then click on a class’s name, it will show you (to the right of the class name) two little icon buttons. Hover over them and you will see that you can click one to view the Instance Categorizer for the class and another to view the Instance List for the class. You can also show classes based on which heap they live on. If you chose both a Baseline snapshot and a Current snapshot then you can use the “Comparing snapshots” filters to show only: “New objects”; “Surviving objects”; “Survivors in growing classes”; or “Zombie objects” (if you aren’t sure what one of these means, you can click the helpful “?” in a green circle icon to bring up a popup that explains them and provides context). Remember that your selection(s) under the “Show only…” heading will still apply, so you should update those selections to make sure you are seeing the view you want. There are also links under the “What is my memory problem?” heading that can help you diagnose the problems you are seeing including one for “I don’t know which kind I have” for situations where you know generally that your application has some problems but aren’t sure what the behavior you have been seeing (OutOfMemoryExceptions, continually growing memory usage, larger memory use than expected at certain points in the program). The Basic Filters are not the only filters there are. “Filter by Object Type” gives you the ability to filter by: “Objects that are disposable”; “Objects that are/are not disposed”; “Objects that are/are not GC roots” (GC roots are things like static variables); and “Objects that implement _______”. “Objects that implement” is particularly neat. Once you check the box, you can then add one or more classes and interfaces that an object must implement in order to survive the filtering. Lastly there is “Filter by Reference”, which gives you the option to pare down the list based on whether an object is “Kept in memory exclusively by” a particular item, a class/interface, or a namespace; whether an object is “Referenced by” one or more of those choices; and whether an object is “Never referenced by” one or more of those choices. Remember that filtering is cumulative, so anything you had set in one of the filter sections still remains in effect unless and until you go back and change it. There’s quite a bit more to ANTS MP – it’s a very full featured product – but I think I touched on all of the most significant pieces. You can use it to debug: a .NET executable; an ASP.NET web application (running on IIS); an ASP.NET web application (running on Visual Studio’s built-in web development server); a Silverlight 4 browser application; a Windows service; a COM+ server; and even something called an XBAP (local XAML browser application). You can also attach to a .NET 4 process to profile an application that’s already running. The startup screen also has a large number of “Charting Options” that let you adjust which statistics ANTS MP should collect. The default selection is a good, minimal set. It’s worth your time to browse through the charting options to examine other statistics that may also help you diagnose a particular problem. The more statistics ANTS MP collects, the longer it will take to collect statistics. So just turning everything on is probably a bad idea. But the option to selectively add in additional performance counters from the extensive list could be a very helpful thing for your memory profiling as it lets you see additional data that might provide clues about a particular problem that has been bothering you. ANTS MP integrates very nicely with all versions of Visual Studio that support plugins (i.e. all of the non-Express versions). Just note that if you choose “Profile Memory” from the “ANTS” menu that it will launch profiling for whichever project you have set as the Startup project. One quick tip from my experience so far using ANTS MP: if you want to properly understand your memory usage in an application you’ve written, first create an “empty” version of the type of project you are going to profile (a WPF application, an XNA game, etc.) and do a quick profiling session on that so that you know the baseline memory usage of the framework itself. By “empty” I mean just create a new project of that type in Visual Studio then compile it and run it with profiling – don’t do anything special or add in anything (except perhaps for any external libraries you’re planning to use). The first thing I tried ANTS MP out on was a demo XNA project of an editor that I’ve been working on for quite some time that involves a custom extension to XNA’s content pipeline. The first time I ran it and saw the unmanaged memory usage I was convinced I had some horrible bug that was creating extra copies of texture data (the demo project didn’t have a lot of texture data so when I saw a lot of unmanaged memory I instantly figured I was doing something wrong). Then I thought to run an empty project through and when I saw that the amount of unmanaged memory was virtually identical, it dawned on me that the CLR itself sits in unmanaged memory and that (thankfully) there was nothing wrong with my code! Quite a relief. Earlier, when discussing the overview video, I mentioned the API that lets you take snapshots from within your application. I gave it a quick trial and it’s very easy to integrate and make use of and is a really nice addition (especially for projects where you want to know what, if any, allocations there are in a specific, complicated section of code). The only concern I had was that if I hadn’t watched the overview video I might never have known it existed. Even then it took me five minutes of hunting around Red Gate’s website before I found the “Taking snapshots from your code" article that explains what DLL you need to add as a reference and what method of what class you should call in order to take an automatic snapshot (including the helpful warning to wrap it in a try-catch block since, under certain circumstances, it can raise an exception, such as trying to call it more than 5 times in 30 seconds. The difficulty in discovering and then finding information about the automatic snapshots API was one thing I thought could use improvement. Another thing I think would make it even better would be local copies of the webpages it links to. Although I’m generally always connected to the internet, I imagine there are more than a few developers who aren’t or who are behind very restrictive firewalls. For them (and for me, too, if my internet connection happens to be down), it would be nice to have those documents installed locally or to have the option to download an additional “documentation” package that would add local copies. Another thing that I wish could be easier to manage is the Filters area. Finding and setting individual filters is very easy as is understanding what those filter do. And breaking it up into three sections (basic, by object, and by reference) makes sense. But I could easily see myself running a long profiling session and forgetting that I had set some filter a long while earlier in a different filter section and then spending quite a bit of time trying to figure out why some problem that was clearly visible in the data wasn’t showing up in, e.g. the instance list before remembering to check all the filters for that one setting that was only culling a few things from view. Some sort of indicator icon next to the filter section names that appears you have at least one filter set in that area would be a nice visual clue to remind me that “oh yeah, I told it to only show objects on the Gen 2 heap! That’s why I’m not seeing those instances of the SuperMagic class!” Something that would be nice (but that Red Gate cannot really do anything about) would be if this could be used in Windows Phone 7 development. If Microsoft and Red Gate could work together to make this happen (even if just on the WP7 emulator), that would be amazing. Especially given the memory constraints that apps and games running on mobile devices need to work within, a good memory profiler would be a phenomenally helpful tool. If anyone at Microsoft reads this, it’d be really great if you could make something like that happen. Perhaps even a (subsidized) custom version just for WP7 development. (For XNA games, of course, you can create a Windows version of the game and use ANTS MP on the Windows version in order to get a better picture of your memory situation. For Silverlight on WP7, though, there’s quite a bit of educated guess work and WeakReference creation followed by forced collections in order to find the source of a memory problem.) The only other thing I found myself wanting was a “Back” button. Between my Windows Phone 7, Zune, and other things, I’ve grown very used to having a “back stack” that lets me just navigate back to where I came from. The ANTS MP interface is surprisingly easy to use given how much it lets you do, and once you start using it for any amount of time, you learn all of the different areas such that you know where to go. And it does remember the state of the areas you were previously in, of course. So if you go to, e.g., the Instance Retention Graph from the Class List and then return back to the Class List, it will remember which class you had selected and all that other state information. Still, a “Back” button would be a welcome addition to a future release. Bottom Line ANTS Memory Profiler is not an inexpensive tool. But my time is valuable. I can easily see ANTS MP saving me enough time tracking down memory problems to justify it on a cost basis. More importantly to me, knowing what is happening memory-wise in my programs and having the confidence that my code doesn’t have any hidden time bombs in it that will cause it to OOM if I leave it running for longer than I do when I spin it up real quickly for debugging or just to see how a new feature looks and feels is a good feeling. It’s a feeling that I like having and want to continue to have. I got the current version for free in order to review it. Having done so, I’ve now added it to my must-have tools and will gladly lay out the money for the next version when it comes out. It has a 14 day free trial, so if you aren’t sure if it’s right for you or if you think it seems interesting but aren’t really sure if it’s worth shelling out the money for it, give it a try.

  Read the article

• Unit Testing DateTime – The Crazy Way

  - by João Angelo

  We all know that the process of unit testing code that depends on DateTime, particularly the current time provided through the static properties (Now, UtcNow and Today), it’s a PITA. If you go ask how to unit test DateTime.Now on stackoverflow I’ll bet that you’ll get two kind of answers: Encapsulate the current time in your own interface and use a standard mocking framework; Pull out the big guns like Typemock Isolator, JustMock or Microsoft Moles/Fakes and mock the static property directly. Now each alternative has is pros and cons and I would have to say that I glean more to the second approach because the first adds a layer of abstraction just for the sake of testability. However, the second approach depends on commercial tools that not every shop wants to buy or in the not so friendly Microsoft Moles. (Sidenote: Moles is now named Fakes and it will ship with VS 2012) This tends to leave people without an acceptable and simple solution so after reading another of these types of questions in SO I came up with yet another alternative, one based on the first alternative that I presented here but tries really hard to not get in your way with yet another layer of abstraction. So, without further dues, I present you, the Tardis. The Tardis is single section of conditionally compiled code that overrides the meaning of the DateTime expression inside a single class. You still get the normal coding experience of using DateTime all over the place, but in a DEBUG compilation your tests will be able to mock every static method or property of the DateTime class. An example follows, while the full Tardis code can be downloaded from GitHub: using System; using NSubstitute; using NUnit.Framework; using Tardis; public class Example { public Example() : this(string.Empty) { } public Example(string title) { #if DEBUG this.DateTime = DateTimeProvider.Default; this.Initialize(title); } internal IDateTimeProvider DateTime { get; set; } internal Example(string title, IDateTimeProvider provider) { this.DateTime = provider; #endif this.Initialize(title); } private void Initialize(string title) { this.Title = title; this.CreatedAt = DateTime.UtcNow; } private string title; public string Title { get { return this.title; } set { this.title = value; this.UpdatedAt = DateTime.UtcNow; } } public DateTime CreatedAt { get; private set; } public DateTime UpdatedAt { get; private set; } } public class TExample { public void T001() { // Arrange var tardis = Substitute.For<IDateTimeProvider>(); tardis.UtcNow.Returns(new DateTime(2000, 1, 1, 6, 6, 6)); // Act var sut = new Example("Title", tardis); // Assert Assert.That(sut.CreatedAt, Is.EqualTo(tardis.UtcNow)); } public void T002() { // Arrange var tardis = Substitute.For<IDateTimeProvider>(); var sut = new Example("Title", tardis); tardis.UtcNow.Returns(new DateTime(2000, 1, 1, 6, 6, 6)); // Act sut.Title = "Updated"; // Assert Assert.That(sut.UpdatedAt, Is.EqualTo(tardis.UtcNow)); } } This approach is also suitable for other similar classes with commonly used static methods or properties like the ConfigurationManager class.

  Read the article

• CodePlex Daily Summary for Saturday, October 29, 2011

  CodePlex Daily Summary for Saturday, October 29, 2011Popular Releasespatterns & practices: Enterprise Library Contrib: Enterprise Library Contrib - 5.0 (Oct 2011): This release of Enterprise Library Contrib is based on the Microsoft patterns & practices Enterprise Library 5.0 core and contains the following: Common extensionsTypeConfigurationElement<T> - A Polymorphic Configuration Element without having to be part of a PolymorphicConfigurationElementCollection. AnonymousConfigurationElement - A Configuration element that can be uniquely identified without having to define its name explicitly. Data Access Application Block extensionsMySql Provider - ...Network Monitor Open Source Parsers: Network Monitor Parsers 3.4.2748: The Network Monitor Parsers packages contain parsers for more than 400 network protocols, including RFC based public protocols and protocols for Microsoft products defined in the Microsoft Open Specifications for Windows and SQL Server. NetworkMonitor_Parsers.msi is the base parser package which defines parsers for commonly used public protocols and protocols for Microsoft Windows. In this release, NetowrkMonitor_Parsers.msi continues to improve quality and fix bugs. It has included the fo...Duckworth Lewis Professional Edition Calculator: DLcalc 3.0: DLcalc 3.0 can perform Duckworth/Lewis Professional Edition calculations 100% accurately. It also produces over-by-over and ball-by-ball PAR score tables.Folder Bookmarks: Folder Bookmarks 2.2.0.1: In this version: Custom Icons - now you can change the icons of the bookmarks. By default, whenever an image is added, the icon is automatically changed to a thumbnail of the picture. This can be turned off in the settings (Options... > Settings) Ability to remove items from the 'Recent' category Bugfixes - 'Choose' button in 'Edit Bookmark' now works Another bug fix: another problem in the 'Edit Bookmark' windowMedia Companion: MC 3.420b Weekly: Ensure .NET 4.0 Full Framework is installed. (Available from http://www.microsoft.com/download/en/details.aspx?id=17718) Ensure the NFO ID fix is applied when transitioning from versions prior to 3.416b. (Details here) Movies Fixed: Fanart and poster scraping issues TV Shows (Re)Added: Rebuild single show Fixed: Issue when shows are moved from original location Ability to handle " for actor nicknames Crash when episode name contains "<" (does not scrape yet) Clears fanart when switch...patterns & practices - Unity: Unity 3.0 for .NET4.5 Preview: The Unity 3.0.1026.0 Preview enables Unity to work on .NET 4.5 with both the WinRT and desktop profiles. The major changes include: Unity projects updated to target .NET 4.5. Dynamic build plans modified to use compiled lambda expressions instead of Reflection.Emit Converting reflection to use the new TypeInfo for reflection. Projects updated to work with the Microsoft Visual Studio 2011 Preview Notes/Known Issues: The Microsoft.Practices.Unity.UnityServiceLocator class cannot be use...Managed Extensibility Framework: MEF 2 Preview 4: Detailed information on this release is available on the BCL team blog.Image Converter: Image Converter 0.3: New Features: - English and German support Technical Improvements: - Microsoft All Rules using Code Analysis Planned Features for future release: 1. Unit testing 2. Command line interface 3. Automatic UpdatesAcDown????? - Anime&Comic Downloader: AcDown????? v3.6: ?? ● AcDown??????????、??????，??????????????????????，???????Acfun、Bilibili、???、???、???、Tucao.cc、SF???、?????80????，???????????、?????????。 ● AcDown???????????????????????????，???，???????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7 ????????????? ??：????????Windows XP???,?????????.NET Framework 2.0???(x86)?.NET Framework 2.0???(x64)，?????"?????????"??? ??????????????，??????????： ??"AcDown?????"????????? ?? v3.6?? ??“????”...DotNetNuke® Events: 05.02.01: This release fixes any know bugs from any previous version. Events 05.02.01 will work for any DNN version 5.5.0 and up. Full details on the changes can be found at http://dnnevents.codeplex.com/workitem/list/basic Please review and rate this release... (stars are welcome)BUG FIXESAdded validation around category cookie RSS feed was missing an explicit close of the file when writing. Fixed. Added extra security into detail view .ICS Files did not include correct line folding. Fixed Cha...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.33: Add JSParser.ParseExpression method to parse JavaScript expressions rather than source-elements. Add -strict switch (CodeSettings.StrictMode) to force input code to ECMA5 Strict-mode (extra error-checking, "use strict" at top). Fixed bug when MinifyCode setting was set to false but RemoveUnneededCode was left it's default value of true.Path Copy Copy: 8.0: New version that mostly adds lots of requested features: 11340 11339 11338 11337 This version also features a more elaborate Settings UI that has several tabs. I tried to add some notes to better explain the use and purpose of the various options. The Path Copy Copy documentation is also on the way, both to explain how to develop custom plugins and to explain how to pre-configure options if you're a network admin. Stay tuned.MVC Controls Toolkit: Mvc Controls Toolkit 1.5.0: Added: The new Client Blocks feaure of Views A new "move" js method for the TreeViews The NewHtmlCreated js event to the DataGrid Improved the ChoiceList structure that now allows also the selection list of a dropdown to be chosen with a lambda expression Improved the AcceptViewHintAttribute controller filter. Now a client can specify not only the name of a View or Partial View it prefers, but also to receive just the rough data in Json format. Fixed: Issue with partial thrust Cl...Free SharePoint Master Pages: Buried Alive (Halloween) Theme: Release Notes *Created for Halloween, you will find theme file, custom css file and images. *Created by Al Roome @AlstarRoome Features: Custom styling for web part Custom background *Screenshot https://s3.amazonaws.com/kkhipple/post/sharepoint-showcase-halloween.pngDevForce Application Framework: DevForce AF 2.0.3 RTW: PrerequisitesWPF 4.0 Silverlight 4.0 DevForce 2010 6.1.3.1 Download ContentsDebug and Release Assemblies API Documentation Source code License.txt Requirements.txt Release HighlightsNew: EventAggregator event forwarding New: EntityManagerInterceptor<T> to intercept EntityManger events New: IHarnessAware to allow for ViewModel setup when executed inside of the Development Harness New: Improved design time stability New: Support for add-in development New: CoroutineFns.To...NicAudio: NicAudio 2.0.5: Minor change to accept special DTS stereo modes (LtRt, AB,...)NDepend TFS 2010 integration: version 0.5.0 beta 1: Only the activity and the VS plugin are avalaible right now. They basically work. Data types that are logged into tfs reports are subject to change. This is no big deal since data is not yet sent into the warehouse.Windows Azure Toolkit for Windows Phone: Windows Azure Toolkit for Windows Phone v1.3.1: Upgraded Windows Azure projects to Windows Azure Tools for Microsoft Visual Studio 2010 1.5 – September 2011 Upgraded the tools tools to support the Windows Phone Developer Tools RTW Update SQL Azure only scenarios to use ASP.NET Universal Providers (through the System.Web.Providers v1.0.1 NuGet package) Changed Shared Access Signature service interface to support more operations Refactored Blobs API to have a similar interface and usage to that provided by the Windows Azure SDK Stor...DotNetNuke® FAQ: 05.00.00: FAQ (Frequently Asked Questions) 05.00.00 will work for any DNN version 5.6.1 and up. It is the first version which is rewritten in C#. The scope of this update is to fix all known issues and improve user interface. Please review and rate this release... (stars are welcome)BUG FIXESManage Categories button text was not localized Edit/Add FAQ Entry: button text was not localized ENHANCEMENTSAdded an option to select the control for category display: Listbox with checkboxes (flat category ...SiteMap Editor for Microsoft Dynamics CRM 2011: SiteMap Editor (1.0.921.340): Added CodePlex and PayPal links New iconNew ProjectsAsynk: Asynk is a framework/application that allows existing applications to easily be extended with an offloaded asynchronous worker layer. Asynk is developed using C#.Blob Tower Defense: 3D tower defense game for Windows Phone 7. School project for Brno University of Technology, computer graphics class.Booz: Booz is... An extended version of the boo shell (booish2 to be precise). Offers additional commands like cd, md, ls etc. I hope this shell can be used to take the position of/surpass the native windows shell in the near future.CIMS: a sanction infomation system for sencience and technology of hustCrystalDot - Icon Collection / Pack (LGPL): .Net / Mono freundliche Varainte der Crystal-Icons von Everaldo Icon collection / pack for .NET and Mono designed by Everaldo - KDE style http://www.everaldo.com/crystal/dotetes: dotetes adalah teka teki silang tool dikembangkan dengan bahasa c#Emoe': This Project is a Windows Phone 7.1 application.Equation Inversion: Visual Studion 2008 Add-in for equation inversions.Exploring VMR Features on WEC7: This is the sample application helps you to do alpha blending the bitmap on camera streaming in Windows Embedded Compact 7 using Directshow video Renderer (VMR). It is a VS2008 based smart device project developed on C++. I have explained the sample application in the following blog link. http://www.e-consystems.com/blog/windowsce/?p=759 EzValidation: Custom validation extensions for ASP.NET MVC 3. Includes server and client side model based validation attributes for: -- Equal To -- Not Equal To -- Greater Than -- Greater Than or Equal To -- Less Than -- Less Than or Equal To Supports validating against: -- Another Model Field -- A Specific Value -- Current Date/Yesterday/Tomorrow (for Dates and Strings) Download & Install via NuGet "package-install ezvalidation"Flu.net: Flu.net is a tool that helps you creating your own fluent syntax for .NET Framework applications in a declarative fashion. It is aimed for infrastructures and other open-source projects use.For Chess Endgames: King vs. King Opposition Calculator: You must input the locations of 2 kings on a chessboard, and whose turn it is to move. The calculator will display which king has the opposition, and how it can be used or maintained.GameTrakXNA: This project aims to create a simple library to use the unique GameTrak controller within XNA and Flash.Google Speech Recognition Example: Google Speech Recognition contains a working example of application that uses google speech recognition API. App contains all necessary dlls to record, decode and send your voice request to google service and recieve a text representation of what you've said. It's developed in C#Interval Mandelbrot Explorer: Explore the Mandelbrot set using interval arithmetic.ISD training tasks: ISD training examples and tasksiTunesControlBar: The iTunesControlBar helps user control their iTunes Application while it is minimized. iTunesControlBar resides at the top of the screen, invisible when not used, and allows playback and volume control, library searches and media information without the need to bring up iTunes.iTurtle: A bunch of Powerscripts to automate server management in AD environment.M26WC - Mono 2.6 Wizard Control: Wizard which runs under Mono2.6 A fork of: http://aerowizard.codeplex.com/Microsoft Help Viewer 2: Help Viewer 2 is the help runtime for both Visual Studio 11 help and Windows 8 help. The code in this project will help you use and understand the HV2 runtime API.MONTRASEC: Monitoring Trafficking in human beings and Sexual Exploitation of Children: benchmarking for member state and EU reporting, turning the SIAMSECT templates into a user-friendly interface and reporting tool. MTF.NET Runtime: Managed Task Framework .NET Runtime The MTF.NET runtime software and resulting assemblies are required to run applications built using the Managed Task Framework.NET Professional (Visual Studio 2010 extension) software design editor. The MTF.NET team are committed to continuously improving the core MTF.NET runtime and ensuring it is always available free and fully transparent. Pandoras Box: A greenfield inversion of control project utilising the power and flexibility of expressions and preferring convention over configuration.Pass the Puzzle: Pass the Puzzle is a frantic word-guessing party game. The game displays a few letters, and the players must come up with words containing those letters. But beware: if the timer goes off, you lose! It is based on the folk party game Pass the Parcel and is written in C#.PerCiGal: Percigal is a project for the development of applications for managing your personal media library. It consists in - a windows application to use at home to catalog movies, TV series, cast and books, with the support of the Internet for information retrieval; - a web interface for viewing and cataloging everywhere your media; - an application for smartphones. Project Flying Carpet: Este jogo é um projeto para a cadeira Projeto de Jogos: Motores Jogos do curso de Jogos Digitais da Unisinos.proxy browser: sed leo Latin's Butterfly....Python Multiple Dispatch: Multiple dispatch (AKA multimethods) for Python 3 via a metaclass and type annotations.reDune: ?????????? ???? ? ????? «????????? ? ???????? ???????». ???????? ?? Dune2000 ?? Westwood ? Electronic Arts.Rereadable: Keep page from internet for read it latter.ServStop: ServStop is a .NET application that makes it easy to stop several system services at once. Now you don't have to change startup types or stop them one at a time. It has a simple list-based interface with the ability to save and load lists of user services to stop. Written in C#.SharePoint 2010 Audience Membership Workflow Activity (Full Trust): A simple SharePoint 2010 workflow activity / workflow condition to check whether the user initiating the workflow is a member of a specified audience. Farm-level .wsp solution, written in C#. Once installed, the workflow activity can be used in SharePoint Designer 2010 declarative workflows.SQL Server® to Firebird DB converter: Converts Microsoft SQL Server® database into Firebird database including entire structure and datastegitest: test projectSystem.Threading.Joins: The Joins project provides asynchronous concurrency semantics based on join calculus and modeled after the Microsoft Research C? (C Omega) project.TestAndroidGame: try dev a TestAndroidGametetribricks: block game Topographic Explorer: A project to import, convert, explore, manipulate, and save topographical maps. Looking to use C# and WPF.Trading: Under construction!!!Trombone: Trombone makes it easier for Windows Mobile Professional users to automate status reply through SMS. It's developed in Visual C# 2008.Tulsa SharePoint Interest Group: Repository for source code for the Tulsa SharePoint Interest Group's web site. The Tulsa SharePoint Interest Group is using the Community Kit for SharePoint. This project will house any modifications that are specific to our user group.World of Tanks RU tiny stats collection utilty.: Tiny utility to load players stats for World of Tanks RU server. Results saved to comma separated file.WS-Discovery Proxy: Attempt at creating general purpose WS-Discovery Proxy.Yamaha Tu?n Tr?c: This application is used to manage information for Yamaha Tu?n Tr?c

  Read the article

• Detecting HTML5/CSS3 Features using Modernizr

  - by dwahlin

  HTML5, CSS3, and related technologies such as canvas and web sockets bring a lot of useful new features to the table that can take Web applications to the next level. These new technologies allow applications to be built using only HTML, CSS, and JavaScript allowing them to be viewed on a variety of form factors including tablets and phones. Although HTML5 features offer a lot of promise, it’s not realistic to develop applications using the latest technologies without worrying about supporting older browsers in the process. If history has taught us anything it’s that old browsers stick around for years and years which means developers have to deal with backward compatibility issues. This is especially true when deploying applications to the Internet that target the general public. This begs the question, “How do you move forward with HTML5 and CSS3 technologies while gracefully handling unsupported features in older browsers?” Although you can write code by hand to detect different HTML5 and CSS3 features, it’s not always straightforward. For example, to check for canvas support you need to write code similar to the following:   <script> window.onload = function () { if (canvasSupported()) { alert('canvas supported'); } }; function canvasSupported() { var canvas = document.createElement('canvas'); return (canvas.getContext && canvas.getContext('2d')); } </script> If you want to check for local storage support the following check can be made. It’s more involved than it should be due to a bug in older versions of Firefox. <script> window.onload = function () { if (localStorageSupported()) { alert('local storage supported'); } }; function localStorageSupported() { try { return ('localStorage' in window && window['localStorage'] != null); } catch(e) {} return false; } </script> Looking through the previous examples you can see that there’s more than meets the eye when it comes to checking browsers for HTML5 and CSS3 features. It takes a lot of work to test every possible scenario and every version of a given browser. Fortunately, you don’t have to resort to writing custom code to test what HTML5/CSS3 features a given browser supports. By using a script library called Modernizr you can add checks for different HTML5/CSS3 features into your pages with a minimal amount of code on your part. Let’s take a look at some of the key features Modernizr offers.   Getting Started with Modernizr The first time I heard the name “Modernizr” I thought it “modernized” older browsers by added missing functionality. In reality, Modernizr doesn’t actually handle adding missing features or “modernizing” older browsers. The Modernizr website states, “The name Modernizr actually stems from the goal of modernizing our development practices (and ourselves)”. Because it relies on feature detection rather than browser sniffing (a common technique used in the past – that never worked that great), Modernizr definitely provides a more modern way to test features that a browser supports and can even handle loading additional scripts called shims or polyfills that fill in holes that older browsers may have. It’s a great tool to have in your arsenal if you’re a web developer. Modernizr is available at http://modernizr.com. Two different types of scripts are available including a development script and custom production script. To generate a production script, the site provides a custom script generation tool rather than providing a single script that has everything under the sun for HTML5/CSS3 feature detection. Using the script generation tool you can pick the specific test functionality that you need and ignore everything that you don’t need. That way the script is kept as small as possible. An example of the custom script download screen is shown next. Notice that specific CSS3, HTML5, and related feature tests can be selected. Once you’ve downloaded your custom script you can add it into your web page using the standard <script> element and you’re ready to start using Modernizr. <script src="Scripts/Modernizr.js" type="text/javascript"></script>   Modernizr and the HTML Element Once you’ve add a script reference to Modernizr in a page it’ll go to work for you immediately. In fact, by adding the script several different CSS classes will be added to the page’s <html> element at runtime. These classes define what features the browser supports and what features it doesn’t support. Features that aren’t supported get a class name of “no-FeatureName”, for example “no-flexbox”. Features that are supported get a CSS class name based on the feature such as “canvas” or “websockets”. An example of classes added when running a page in Chrome is shown next:   <html class=" js flexbox canvas canvastext webgl no-touch geolocation postmessage websqldatabase indexeddb hashchange history draganddrop websockets rgba hsla multiplebgs backgroundsize borderimage borderradius boxshadow textshadow opacity cssanimations csscolumns cssgradients cssreflections csstransforms csstransforms3d csstransitions fontface generatedcontent video audio localstorage sessionstorage webworkers applicationcache svg inlinesvg smil svgclippaths"> Here’s an example of what the <html> element looks like at runtime with Internet Explorer 9:   <html class=" js no-flexbox canvas canvastext no-webgl no-touch geolocation postmessage no-websqldatabase no-indexeddb hashchange no-history draganddrop no-websockets rgba hsla multiplebgs backgroundsize no-borderimage borderradius boxshadow no-textshadow opacity no-cssanimations no-csscolumns no-cssgradients no-cssreflections csstransforms no-csstransforms3d no-csstransitions fontface generatedcontent video audio localstorage sessionstorage no-webworkers no-applicationcache svg inlinesvg smil svgclippaths">   When using Modernizr it’s a common practice to define an <html> element in your page with a no-js class added as shown next:   <html class="no-js">   You’ll see starter projects such as HTML5 Boilerplate (http://html5boilerplate.com) or Initializr (http://initializr.com) follow this approach (see my previous post for more information on HTML5 Boilerplate). By adding the no-js class it’s easy to tell if a browser has JavaScript enabled or not. If JavaScript is disabled then no-js will stay on the <html> element. If JavaScript is enabled, no-js will be removed by Modernizr and a js class will be added along with other classes that define supported/unsupported features. Working with HTML5 and CSS3 Features You can use the CSS classes added to the <html> element directly in your CSS files to determine what style properties to use based upon the features supported by a given browser. For example, the following CSS can be used to render a box shadow for browsers that support that feature and a simple border for browsers that don’t support the feature: .boxshadow #MyContainer { border: none; -webkit-box-shadow: #666 1px 1px 1px; -moz-box-shadow: #666 1px 1px 1px; } .no-boxshadow #MyContainer { border: 2px solid black; }   If a browser supports box-shadows the boxshadow CSS class will be added to the <html> element by Modernizr. It can then be associated with a given element. This example associates the boxshadow class with a div with an id of MyContainer. If the browser doesn’t support box shadows then the no-boxshadow class will be added to the <html> element and it can be used to render a standard border around the div. This provides a great way to leverage new CSS3 features in supported browsers while providing a graceful fallback for older browsers. In addition to using the CSS classes that Modernizr provides on the <html> element, you also use a global Modernizr object that’s created. This object exposes different properties that can be used to detect the availability of specific HTML5 or CSS3 features. For example, the following code can be used to detect canvas and local storage support. You can see that the code is much simpler than the code shown at the beginning of this post. It also has the added benefit of being tested by a large community of web developers around the world running a variety of browsers.   $(document).ready(function () { if (Modernizr.canvas) { //Add canvas code } if (Modernizr.localstorage) { //Add local storage code } }); The global Modernizr object can also be used to test for the presence of CSS3 features. The following code shows how to test support for border-radius and CSS transforms:   $(document).ready(function () { if (Modernizr.borderradius) { $('#MyDiv').addClass('borderRadiusStyle'); } if (Modernizr.csstransforms) { $('#MyDiv').addClass('transformsStyle'); } });   Several other CSS3 feature tests can be performed such as support for opacity, rgba, text-shadow, CSS animations, CSS transitions, multiple backgrounds, and more. A complete list of supported HTML5 and CSS3 tests that Modernizr supports can be found at http://www.modernizr.com/docs.   Loading Scripts using Modernizr In cases where a browser doesn’t support a specific feature you can either provide a graceful fallback or load a shim/polyfill script to fill in missing functionality where appropriate (more information about shims/polyfills can be found at https://github.com/Modernizr/Modernizr/wiki/HTML5-Cross-Browser-Polyfills). Modernizr has a built-in script loader that can be used to test for a feature and then load a script if the feature isn’t available. The script loader is built-into Modernizr and is also available as a standalone yepnope script (http://yepnopejs.com). It’s extremely easy to get started using the script loader and it can really simplify the process of loading scripts based on the availability of a particular browser feature. To load scripts dynamically you can use Modernizr’s load() function which accepts properties defining the feature to test (test property), the script to load if the test succeeds (yep property), the script to load if the test fails (nope property), and a script to load regardless of if the test succeeds or fails (both property). An example of using load() with these properties is show next: Modernizr.load({ test: Modernizr.canvas, yep: 'html5CanvasAvailable.js’, nope: 'excanvas.js’, both: 'myCustomScript.js' }); In this example Modernizr is used to not only load scripts but also to test for the presence of the canvas feature. If the target browser supports the HTML5 canvas then the html5CanvasAvailable.js script will be loaded along with the myCustomScript.js script (use of the yep property in this example is a bit contrived – it was added simply to demonstrate how the property can be used in the load() function). Otherwise, a polyfill script named excanvas.js will be loaded to add missing canvas functionality for Internet Explorer versions prior to 9. Once excanvas.js is loaded the myCustomScript.js script will be loaded. Because Modernizr handles loading scripts, you can also use it in creative ways. For example, you can use it to load local scripts when a 3rd party Content Delivery Network (CDN) such as one provided by Google or Microsoft is unavailable for whatever reason. The Modernizr documentation provides the following example that demonstrates the process for providing a local fallback for jQuery when a CDN is down:   Modernizr.load([ { load: '//ajax.googleapis.com/ajax/libs/jquery/1.6.4/jquery.js', complete: function () { if (!window.jQuery) { Modernizr.load('js/libs/jquery-1.6.4.min.js'); } } }, { // This will wait for the fallback to load and // execute if it needs to. load: 'needs-jQuery.js' } ]); This code attempts to load jQuery from the Google CDN first. Once the script is downloaded (or if it fails) the function associated with complete will be called. The function checks to make sure that the jQuery object is available and if it’s not Modernizr is used to load a local jQuery script. After all of that occurs a script named needs-jQuery.js will be loaded. Conclusion If you’re building applications that use some of the latest and greatest features available in HTML5 and CSS3 then Modernizr is an essential tool. By using it you can reduce the amount of custom code required to test for browser features and provide graceful fallbacks or even load shim/polyfill scripts for older browsers to help fill in missing functionality. 

  Read the article

• BizTalk and SQL: Alternatives to the SQL receive adapter. Using Msmq to receive SQL data

  - by Leonid Ganeline

  If we have to get data from the SQL database, the standard way is to use a receive port with SQL adapter. SQL receive adapter is a solicit-response adapter. It periodically polls the SQL database with queries. That’s only way it can work. Sometimes it is undesirable. With new WCF-SQL adapter we can use the lightweight approach but still with the same principle, the WCF-SQL adapter periodically solicits the database with queries to check for the new records. Imagine the situation when the new records can appear in very broad time limits, some - in a second interval, others - in the several minutes interval. Our requirement is to process the new records ASAP. That means the polling interval should be near the shortest interval between the new records, a second interval. As a result the most of the poll queries would return nothing and would load the database without good reason. If the database is working under heavy payload, it is very undesirable. Do we have other choices? Sure. We can change the polling to the “eventing”. The good news is the SQL server could issue the event in case of new records with triggers. Got a new record –the trigger event is fired. No new records – no the trigger events – no excessive load to the database. The bad news is the SQL Server doesn’t have intrinsic methods to send the event data outside. For example, we would rather use the adapters that do listen for the data and do not solicit. There are several such adapters-listeners as File, Ftp, SOAP, WCF, and Msmq. But the SQL Server doesn’t have methods to create and save files, to consume the Web-services, to create and send messages in the queue, does it? Can we use the File, FTP, Msmq, WCF adapters to get data from SQL code? Yes, we can. The SQL Server 2005 and 2008 have the possibility to use .NET code inside SQL code. See the SQL Integration. How it works for the Msmq, for example: ·         New record is created, trigger is fired ·         Trigger calls the CLR stored procedure and passes the message parameters to it ·         The CLR stored procedure creates message and sends it to the outgoing queue in the SQL Server computer. ·         Msmq service transfers message to the queue in the BizTalk Server computer. ·         WCF-NetMsmq adapter receives the message from this queue. For the File adapter the idea is the same, the CLR stored procedure creates and stores the file with message, and then the File adapter picks up this file. Using WCF-NetMsmq adapter to get data from SQL I am describing the full set of the deployment and development steps for the case with the WCF-NetMsmq adapter. Development: 1.       Create the .NET code: project, class and method to create and send the message to the MSMQ queue. 2.       Create the SQL code in triggers to call the .NET code. Installation and Deployment: 1.       SQL Server: a.       Register the CLR assembly with .NET (CLR) code b.      Install the MSMQ Services 2.       BizTalk Server: a.       Install the MSMQ Services b.      Create the MSMQ queue c.       Create the WCF-NetMsmq receive port. The detailed description is below. Code .NET code … using System.Xml; using System.Xml.Linq; using System.Xml.Serialization;   //namespace MyCompany.MySolution.MyProject – doesn’t work. The assembly name is MyCompany.MySolution.MyProject // I gave up with the compound namespace. Seems the CLR Integration cannot work with it L. Maybe I’m wrong.     public class Event     {         static public XElement CreateMsg(int par1, int par2, int par3)         {             XNamespace ns = "http://schemas.microsoft.com/Sql/2008/05/TypedPolling/my_storedProc";             XElement xdoc =                 new XElement(ns + "TypedPolling",                     new XElement(ns + "TypedPollingResultSet0",                         new XElement(ns + "TypedPollingResultSet0",                             new XElement(ns + "par1", par1),                             new XElement(ns + "par2", par2),                             new XElement(ns + "par3", par3),                         )                     )                 );             return xdoc;         }     }   //////////////////////////////////////////////////////////////////////// … using System.ServiceModel; using System.ServiceModel.Channels; using System.Transactions; using System.Data; using System.Data.Sql; using System.Data.SqlTypes;   public class MsmqHelper {     [Microsoft.SqlServer.Server.SqlProcedure]     // msmqAddress as "net.msmq://localhost/private/myapp.myqueue";     public static void SendMsg(string msmqAddress, string action, int par1, int par2, int par3)     {         using (TransactionScope scope = new TransactionScope(TransactionScopeOption.Suppress))         {             NetMsmqBinding binding = new NetMsmqBinding(NetMsmqSecurityMode.None);             binding.ExactlyOnce = true;             EndpointAddress address = new EndpointAddress(msmqAddress);               using (ChannelFactory<IOutputChannel> factory = new ChannelFactory<IOutputChannel>(binding, address))             {                 IOutputChannel channel = factory.CreateChannel();                 try                 {                     XElement xe = Event.CreateMsg(par1, par2, par3);                     XmlReader xr = xe.CreateReader();                     Message msg = Message.CreateMessage(MessageVersion.Default, action, xr);                     channel.Send(msg);                     //SqlContext.Pipe.Send(…); // to test                 }                 catch (Exception ex)                 { …                 }             }             scope.Complete();         }     }   SQL code in triggers   -- sp_SendMsg was registered as a name of the MsmqHelper.SendMsg() EXEC sp_SendMsg'net.msmq://biztalk_server_name/private/myapp.myqueue', 'Create', @par1, @par2, @par3   Installation and Deployment On the SQL Server Registering the CLR assembly 1.       Prerequisites: .NET 3.5 SP1 Framework. It could be the issue for the production SQL Server! 2.       For more information, please, see the link http://nielsb.wordpress.com/sqlclrwcf/ 3.       Copy files: >copy “\Windows\Microsoft.net\Framework\v3.0\Windows Communication Foundation\Microsoft.Transactions.Bridge.dll” “\Program Files\Reference Assemblies\Microsoft\Framework\v3.0 \Microsoft.Transactions.Bridge.dll” If your machine is a 64-bit, run two commands: >copy “\Windows\Microsoft.net\Framework\v3.0\Windows Communication Foundation\Microsoft.Transactions.Bridge.dll” “\Program Files (x86)\Reference Assemblies\Microsoft\Framework\v3.0 \Microsoft.Transactions.Bridge.dll” >copy “\Windows\Microsoft.net\Framework64\v3.0\Windows Communication Foundation\Microsoft.Transactions.Bridge.dll” “\Program Files\Reference Assemblies\Microsoft\Framework\v3.0 \Microsoft.Transactions.Bridge.dll” 4.       Execute the SQL code to register the .NET assemblies: -- For x64 OS: CREATE ASSEMBLY SMdiagnostics AUTHORIZATION dbo FROM 'C:\Windows\Microsoft.NET\Framework\v3.0\Windows Communication Foundation\SMdiagnostics.dll' WITH permission_set = unsafe CREATE ASSEMBLY [System.Web] AUTHORIZATION dbo FROM 'C:\Windows\Microsoft.NET\Framework64\v2.0.50727\System.Web.dll' WITH permission_set = unsafe CREATE ASSEMBLY [System.Messaging] AUTHORIZATION dbo FROM 'C:\Windows\Microsoft.NET\Framework\v2.0.50727\System.Messaging.dll' WITH permission_set = unsafe CREATE ASSEMBLY [System.ServiceModel] AUTHORIZATION dbo FROM 'C:\Program Files (x86)\Reference Assemblies\Microsoft\Framework\v3.0\System.ServiceModel.dll' WITH permission_set = unsafe CREATE ASSEMBLY [System.Xml.Linq] AUTHORIZATION dbo FROM 'C:\Program Files\Reference Assemblies\Microsoft\Framework\v3.5\System.Xml.Linq.dll' WITH permission_set = unsafe   -- For x32 OS: --CREATE ASSEMBLY SMdiagnostics AUTHORIZATION dbo FROM 'C:\Windows\Microsoft.NET\Framework\v3.0\Windows Communication Foundation\SMdiagnostics.dll' WITH permission_set = unsafe --CREATE ASSEMBLY [System.Web] AUTHORIZATION dbo FROM 'C:\Windows\Microsoft.NET\Framework\v2.0.50727\System.Web.dll' WITH permission_set = unsafe --CREATE ASSEMBLY [System.Messaging] AUTHORIZATION dbo FROM 'C:\Windows\Microsoft.NET\Framework\v2.0.50727\System.Messaging.dll' WITH permission_set = unsafe --CREATE ASSEMBLY [System.ServiceModel] AUTHORIZATION dbo FROM 'C:\Program Files\Reference Assemblies\Microsoft\Framework\v3.0\System.ServiceModel.dll' WITH permission_set = unsafe 5.       Register the assembly with the external stored procedure: CREATE ASSEMBLY [HelperClass] AUTHORIZATION dbo FROM ’<FilePath>MyCompany.MySolution.MyProject.dll' WITH permission_set = unsafe where the <FilePath> - the path of the file on this machine! 6. Create the external stored procedure CREATE PROCEDURE sp_SendMsg (        @msmqAddress nvarchar(100),        @Action NVARCHAR(50),        @par1 int,        @par2 int,        @par3 int ) AS EXTERNAL NAME HelperClear.MsmqHelper.SendMsg   Installing the MSMQ Services 1.       Check if the MSMQ service is NOT installed. To check:  Start / Administrative Tools / Computer Management, on the left pane open the “Services and Applications”, search to the “Message Queuing”. If you cannot see it, follow next steps. 2.       Start / Control Panel / Programs and Features 3.       Click “Turn Windows Features on or off” 4.       Click Features, click “Add Features” 5.       Scroll down the feature list; open the “Message Queuing” / “Message Queuing Services”; and check the “Message Queuing Server” option  6.       Click Next; Click Install; wait to the successful finish of the installation Creating the MSMQ queue We don’t need to create the queue on the “sender” side. On the BizTalk Server Installing the MSMQ Services The same is as for the SQL Server. Creating the MSMQ queue 1.       Start / Administrative Tools / Computer Management, on the left pane open the “Services and Applications”, open the “Message Queuing”, and open the “Private Queues”. 2.       Right-click the “Private Queues”; choose New; choose “Private Queue”. 3.       Type the Queue name as ’myapp.myqueue'; check the “Transactional” option. Creating the WCF-NetMsmq receive port I will not go through this step in all details. It is straightforward. URI for this receive location should be 'net.msmq://localhost/private/myapp.myqueue'. Notes ·         The biggest problem is usually on the step the “Registering the CLR assembly”. It is hard to predict where are the assemblies from the assembly list, what version should be used, x86 or x64. It is pity of such “rude” integration of the SQL with .NET. ·         In couple cases the new WCF-NetMsmq port was not able to work with the queue. Try to replace the WCF- NetMsmq port with the WCF-Custom port with netMsmqBinding. It was working fine for me. ·         To test how messages go through the queue you can turn on the Journal /Enabled option for the queue. I used the QueueExplorer utility to look to the messages in Journal. The Computer Management can also show the messages but it shows only small part of the message body and in the weird format. The QueueExplorer can do the better job; it shows the whole body and Xml messages are in good color format.

  Read the article

• Inside the DLR – Invoking methods

  - by Simon Cooper

  So, we’ve looked at how a dynamic call is represented in a compiled assembly, and how the dynamic lookup is performed at runtime. The last piece of the puzzle is how the resolved method gets invoked, and that is the subject of this post. Invoking methods As discussed in my previous posts, doing a full lookup and bind at runtime each and every single time the callsite gets invoked would be far too slow to be usable. The results obtained from the callsite binder must to be cached, along with a series of conditions to determine whether the cached result can be reused. So, firstly, how are the conditions represented? These conditions can be anything; they are determined entirely by the semantics of the language the binder is representing. The binder has to be able to return arbitary code that is then executed to determine whether the conditions apply or not. Fortunately, .NET 4 has a neat way of representing arbitary code that can be easily combined with other code – expression trees. All the callsite binder has to return is an expression (called a ‘restriction’) that evaluates to a boolean, returning true when the restriction passes (indicating the corresponding method invocation can be used) and false when it does’t. If the bind result is also represented in an expression tree, these can be combined easily like so: if ([restriction is true]) { [invoke cached method] } Take my example from my previous post: public class ClassA { public static void TestDynamic() { CallDynamic(new ClassA(), 10); CallDynamic(new ClassA(), "foo"); } public static void CallDynamic(dynamic d, object o) { d.Method(o); } public void Method(int i) {} public void Method(string s) {} } When the Method(int) method is first bound, along with an expression representing the result of the bind lookup, the C# binder will return the restrictions under which that bind can be reused. In this case, it can be reused if the types of the parameters are the same: if (thisArg.GetType() == typeof(ClassA) && arg1.GetType() == typeof(int)) { thisClassA.Method(i); } Caching callsite results So, now, it’s up to the callsite to link these expressions returned from the binder together in such a way that it can determine which one from the many it has cached it should use. This caching logic is all located in the System.Dynamic.UpdateDelegates class. It’ll help if you’ve got this type open in a decompiler to have a look yourself. For each callsite, there are 3 layers of caching involved: The last method invoked on the callsite. All methods that have ever been invoked on the callsite. All methods that have ever been invoked on any callsite of the same type. We’ll cover each of these layers in order Level 1 cache: the last method called on the callsite When a CallSite<T> object is first instantiated, the Target delegate field (containing the delegate that is called when the callsite is invoked) is set to one of the UpdateAndExecute generic methods in UpdateDelegates, corresponding to the number of parameters to the callsite, and the existance of any return value. These methods contain most of the caching, invoke, and binding logic for the callsite. The first time this method is invoked, the UpdateAndExecute method finds there aren’t any entries in the caches to reuse, and invokes the binder to resolve a new method. Once the callsite has the result from the binder, along with any restrictions, it stitches some extra expressions in, and replaces the Target field in the callsite with a compiled expression tree similar to this (in this example I’m assuming there’s no return value): if ([restriction is true]) { [invoke cached method] return; } if (callSite._match) { _match = false; return; } else { UpdateAndExecute(callSite, arg0, arg1, ...); } Woah. What’s going on here? Well, this resulting expression tree is actually the first level of caching. The Target field in the callsite, which contains the delegate to call when the callsite is invoked, is set to the above code compiled from the expression tree into IL, and then into native code by the JIT. This code checks whether the restrictions of the last method that was invoked on the callsite (the ‘primary’ method) match, and if so, executes that method straight away. This means that, the next time the callsite is invoked, the first code that executes is the restriction check, executing as native code! This makes this restriction check on the primary cached delegate very fast. But what if the restrictions don’t match? In that case, the second part of the stitched expression tree is executed. What this section should be doing is calling back into the UpdateAndExecute method again to resolve a new method. But it’s slightly more complicated than that. To understand why, we need to understand the second and third level caches. Level 2 cache: all methods that have ever been invoked on the callsite When a binder has returned the result of a lookup, as well as updating the Target field with a compiled expression tree, stitched together as above, the callsite puts the same compiled expression tree in an internal list of delegates, called the rules list. This list acts as the level 2 cache. Why use the same delegate? Stitching together expression trees is an expensive operation. You don’t want to do it every time the callsite is invoked. Ideally, you would create one expression tree from the binder’s result, compile it, and then use the resulting delegate everywhere in the callsite. But, if the same delegate is used to invoke the callsite in the first place, and in the caches, that means each delegate needs two modes of operation. An ‘invoke’ mode, for when the delegate is set as the value of the Target field, and a ‘match’ mode, used when UpdateAndExecute is searching for a method in the callsite’s cache. Only in the invoke mode would the delegate call back into UpdateAndExecute. In match mode, it would simply return without doing anything. This mode is controlled by the _match field in CallSite<T>. The first time the callsite is invoked, _match is false, and so the Target delegate is called in invoke mode. Then, if the initial restriction check fails, the Target delegate calls back into UpdateAndExecute. This method sets _match to true, then calls all the cached delegates in the rules list in match mode to try and find one that passes its restrictions, and invokes it. However, there needs to be some way for each cached delegate to inform UpdateAndExecute whether it passed its restrictions or not. To do this, as you can see above, it simply re-uses _match, and sets it to false if it did not pass the restrictions. This allows the code within each UpdateAndExecute method to check for cache matches like so: foreach (T cachedDelegate in Rules) { callSite._match = true; cachedDelegate(); // sets _match to false if restrictions do not pass if (callSite._match) { // passed restrictions, and the cached method was invoked // set this delegate as the primary target to invoke next time callSite.Target = cachedDelegate; return; } // no luck, try the next one... } Level 3 cache: all methods that have ever been invoked on any callsite with the same signature The reason for this cache should be clear – if a method has been invoked through a callsite in one place, then it is likely to be invoked on other callsites in the codebase with the same signature. Rather than living in the callsite, the ‘global’ cache for callsite delegates lives in the CallSiteBinder class, in the Cache field. This is a dictionary, typed on the callsite delegate signature, providing a RuleCache<T> instance for each delegate signature. This is accessed in the same way as the level 2 callsite cache, by the UpdateAndExecute methods. When a method is matched in the global cache, it is copied into the callsite and Target cache before being executed. Putting it all together So, how does this all fit together? Like so (I’ve omitted some implementation & performance details): That, in essence, is how the DLR performs its dynamic calls nearly as fast as statically compiled IL code. Extensive use of expression trees, compiled to IL and then into native code. Multiple levels of caching, the first of which executes immediately when the dynamic callsite is invoked. And a clever re-use of compiled expression trees that can be used in completely different contexts without being recompiled. All in all, a very fast and very clever reflection caching mechanism.

  Read the article

• Java: Cannot find a method's symbol even though that method is declared later in the class. The remaining code is looking for a class.

  - by Midimistro

  This is an assignment that we use strings in Java to analyze a phone number. The error I am having is anything below tester=invalidCharacters(c); does not compile because every line past tester=invalidCharacters(c); is looking for a symbol or the class. In get invalidResults, all I am trying to do is evaluate a given string for non-alphabetical characters such as *,(,^,&,%,@,#,), and so on. What to answer: Why is it producing an error, what will work, and is there an easier method WITHOUT using regex. Here is the link to the assignment: http://cis.csuohio.edu/~hwang/teaching/cis260/assignments/assignment9.html public class PhoneNumber { private int areacode; private int number; private int ext; /////Constructors///// //Third Constructor (given one string arg) "xxx-xxxxxxx" where first three are numbers and the remaining (7) are numbers or letters public PhoneNumber(String newNumber){ //Note: Set default ext to 0 ext=0; ////Declare Temporary Storage and other variables//// //for the first three numbers String areaCodeString; //for the remaining seven characters String newNumberString; //For use in testing the second half of the string boolean containsLetters; boolean containsInvalid; /////Separate the two parts of string///// //Get the area code part of the string areaCodeString=newNumber.substring(0,2); //Convert the string and set it to the area code areacode=Integer.parseInt(areaCodeString); //Skip the "-" and Get the remaining part of the string newNumberString=newNumber.substring(4); //Create an array of characters from newNumberString to reuse in later methods for int length=newNumberString.length(); char [] myCharacters= new char [length]; int i; for (i=0;i<length;i++){ myCharacters [i]=newNumberString.charAt(i); } //Test if newNumberString contains letters & converting them into numbers String reNewNumber=""; //Test for invalid characters containsInvalid=getInvalidResults(newNumberString,length); if (containsInvalid==false){ containsLetters=getCharResults(newNumberString,length); if (containsLetters==true){ for (i=0;i<length;i++){ myCharacters [i]=(char)convertLetNum((myCharacters [i])); reNewNumber=reNewNumber+myCharacters[i]; } } } if (containsInvalid==false){ number=Integer.parseInt(reNewNumber); } else{ System.out.println("Error!"+"\t"+newNumber+" contains illegal characters. This number will be ignored and skipped."); } } //////Primary Methods/Behaviors/////// //Compare this phone number with the one passed by the caller public boolean equals(PhoneNumber pn){ boolean equal; String concat=(areacode+"-"+number); String pN=pn.toString(); if (concat==pN){ equal=true; } else{ equal=false; } return equal; } //Convert the stored number to a certain string depending on extension public String toString(){ String returned; if(ext==0){ returned=(areacode+"-"+number); } else{ returned=(areacode+"-"+number+" ext "+ext); } return returned; } //////Secondary Methods/////// //Method for testing if the second part of the string contains any letters public static boolean getCharResults(String newNumString,int getLength){ //Recreate a character array int i; char [] myCharacters= new char [getLength]; for (i=0;i<getLength;i++){ myCharacters [i]=newNumString.charAt(i); } boolean doesContainLetter=false; int j; for (j=0;j<getLength;j++){ if ((Character.isDigit(myCharacters[j])==true)){ doesContainLetter=false; } else{ doesContainLetter=true; return doesContainLetter; } } return doesContainLetter; } //Method for testing if the second part of the string contains any letters public static boolean getInvalidResults(String newNumString,int getLength){ boolean doesContainInvalid=false; int i; char c; boolean tester; char [] invalidCharacters= new char [getLength]; for (i=0;i<getLength;i++){ invalidCharacters [i]=newNumString.charAt(i); c=invalidCharacters [i]; tester=invalidCharacters(c); if(tester==true)){ doesContainInvalid=false; } else{ doesContainInvalid=true; return doesContainInvalid; } } return doesContainInvalid; } //Method for evaluating string for invalid characters public boolean invalidCharacters(char letter){ boolean returnNum=false; switch (letter){ case 'A': return returnNum; case 'B': return returnNum; case 'C': return returnNum; case 'D': return returnNum; case 'E': return returnNum; case 'F': return returnNum; case 'G': return returnNum; case 'H': return returnNum; case 'I': return returnNum; case 'J': return returnNum; case 'K': return returnNum; case 'L': return returnNum; case 'M': return returnNum; case 'N': return returnNum; case 'O': return returnNum; case 'P': return returnNum; case 'Q': return returnNum; case 'R': return returnNum; case 'S': return returnNum; case 'T': return returnNum; case 'U': return returnNum; case 'V': return returnNum; case 'W': return returnNum; case 'X': return returnNum; case 'Y': return returnNum; case 'Z': return returnNum; default: return true; } } //Method for converting letters to numbers public int convertLetNum(char letter){ int returnNum; switch (letter){ case 'A': returnNum=2;return returnNum; case 'B': returnNum=2;return returnNum; case 'C': returnNum=2;return returnNum; case 'D': returnNum=3;return returnNum; case 'E': returnNum=3;return returnNum; case 'F': returnNum=3;return returnNum; case 'G': returnNum=4;return returnNum; case 'H': returnNum=4;return returnNum; case 'I': returnNum=4;return returnNum; case 'J': returnNum=5;return returnNum; case 'K': returnNum=5;return returnNum; case 'L': returnNum=5;return returnNum; case 'M': returnNum=6;return returnNum; case 'N': returnNum=6;return returnNum; case 'O': returnNum=6;return returnNum; case 'P': returnNum=7;return returnNum; case 'Q': returnNum=7;return returnNum; case 'R': returnNum=7;return returnNum; case 'S': returnNum=7;return returnNum; case 'T': returnNum=8;return returnNum; case 'U': returnNum=8;return returnNum; case 'V': returnNum=8;return returnNum; case 'W': returnNum=9;return returnNum; case 'X': returnNum=9;return returnNum; case 'Y': returnNum=9;return returnNum; case 'Z': returnNum=9;return returnNum; default: return 0; } } } Note: Please Do not use this program to cheat in your own class. To ensure of this, I will take this question down if it has not been answered by the end of 2013, if I no longer need an explanation for it, or if the term for the class has ended.

  Read the article

• Does SOLARIS have similar file to Linux's /etc/security/limits.conf?

  - by SQL Warrior

  I'm doing compliance check on SOLARIS 10 OS. I need to verify the following parameter settings: core file size (blocks, -c) unlimited data seg size (kbytes, -d) unlimited file size (blocks, -f) unlimited open files (-n) 65536 stack size (kbytes, -s) unlimited cpu time (seconds, -t) unlimited virtual memory (kbytes, -v) unlimited Sure I could use ulimit -cH to get display above. But I also need to find where those settings are. I'm from Linux, in Linux we have /etc/security/limts.conf file to hold alike information. Do we have such file in Solaris? TIA!

  Read the article

• Linux partitioning problem

  - by Claudiu

  I am using cfdisk to repartition my hdd as from OS install I only got 1 big partition a swap. I wanted to resize the big partition to 1 GB /boot and use the rest of the space for an extended partition. After I do cfdisk, I recheck the partitions with fdisk -l and I get these: Disk /dev/sda: 320 GB, 320070320640 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda3 1 38455 308881755 f Extended LBA Warning: Partition 3 does not end on cylinder boundary. /dev/sda2 38455 38698 1951897 82 Linux swap /dev/sda1 * 38699 38913 311349654 83 Linux My problem is the Warning message, I think I know the cause, I think its because of sda1 Blocks size. How could that be soo big if Start and End interval is small?

  Read the article

• Cannot create file in directory even though it's writable by a group I belong to

  - by Alan Berndt

  I have a directory structure owned by a certain group, and I am a member of the group that owns these directories. I am able to create files in one directory, but not in another, even though the permissions are the same. alan@bricky:/mnt/storage/media$ stat Music Music\ \(Lossy\)/ File: `Music' Size: 34 Blocks: 8 IO Block: 4096 directory Device: fb00h/64256d Inode: 4215424 Links: 3 Access: (2775/drwxrwsr-x) Uid: ( 1001/ media) Gid: ( 1001/ media) Access: 2011-08-19 11:45:03.182586898 -0700 Modify: 2011-08-19 11:44:01.412840027 -0700 Change: 2011-08-19 11:45:02.734603240 -0700 File: `Music (Lossy)/' Size: 6 Blocks: 8 IO Block: 4096 directory Device: fb00h/64256d Inode: 1512056832 Links: 2 Access: (2775/drwxrwsr-x) Uid: ( 1001/ media) Gid: ( 1001/ media) Access: 2011-08-19 11:45:03.190586606 -0700 Modify: 2011-08-19 10:34:46.526530313 -0700 Change: 2011-08-19 11:45:02.738603094 -0700 alan@bricky:/mnt/storage/media$ touch Music/test alan@bricky:/mnt/storage/media$ touch Music\ \(Lossy\)/test touch: cannot touch `Music (Lossy)/test': Permission denied

  Read the article

• Postgres 9.0 locking up, 100% CPU

  - by Jake

  We are having a problem where our Postgres 9.0 server occasionally locks up and kills our webapp. Restarting Postgres fixes the problem. Here's what I've been able to observe: First, usage of one CPU jumps to 100% for a few minutes Disk operations drop to ~0 during this time Database operations drop to 0 (blocks and tuples per sec) Logs show during this time: WARNING: worker took too long to start; cancelled WARNING: worker took too long to start; cancelled No Queries in logs (only those over 200ms are logged) No unusually long-running queries logged before or during Then the second CPU jumps to 100% The number of postgres processes jumps from the usual 8-10 to ~20 Matched by a spike in Postgres Blocks per second (about twice normal) Logs show LOG: could not accept SSL connection: EOF detected Queries are running but slow Restarting postgres returns everything to normal Setup: Server: Amazon EC2 Large Ubuntu 10.04.2 LTS Postgres 9.0.3 Dedicated DB server Does anyone have any idea what's causing this? Or any suggestions about what else I should be checking out?

  Read the article

• error: cannot fork() for status: Resource temporarily unavailable (git)

  - by Elnaz Shahmehr

  when I want to do something: add , remove, pull , push in github, I just have this error in my terminal Thanks in advance! selnaz:iOS-Tidinfo Lnaz$ git add . error: cannot fork() for status: Resource temporarily unavailable fatal: Could not run git status --porcelain fatal: git status --porcelain failed fatal: git status --porcelain failed fatal: git status --porcelain failed fatal: git status --porcelain failed fatal: git status --porcelain failed fatal: git status --porcelain failed Edit: selnaz:iOS-Tidinfo Lnaz$ ulimit -a core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited file size (blocks, -f) unlimited max locked memory (kbytes, -l) unlimited max memory size (kbytes, -m) unlimited open files (-n) 256 pipe size (512 bytes, -p) 1 stack size (kbytes, -s) 8192 cpu time (seconds, -t) unlimited max user processes (-u) 709 virtual memory (kbytes, -v) unlimited Edit2 selnaz:iOS-Tidinfo Lnaz$ ps xfu | wc -l ps: illegal option -- f usage: ps [-AaCcEefhjlMmrSTvwXx] [-O fmt | -o fmt] [-G gid[,gid...]] [-u] [-p pid[,pid...]] [-t tty[,tty...]] [-U user[,user...]] ps [-L] 0

  Read the article

• 1Tb disk formatted on Linux won't mount on windows nor mac

  - by Pedro MC

  I have an external HD (western digital) with 1Tb. I use Linux but I wanted to reserve a cross platform partition on the disk. I decided to create two partitions and used the "disks" application to do it. I created one partition with the LUKS (version 1) encryption and the other one, cross platform, in NTFS filesystem. Things work fine on my OS but when I try to use the disk (the cross platform partition) on both windows and mac the device is not recognized. What could it be? Next, output of "sfdisk -l /dev/sdb": Disk /dev/sdb: 121600 cylinders, 255 heads, 63 sectors/track Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0 Device Boot Start End #cyls #blocks Id System /dev/sdb1 0+ 36473- 36473- 292968750 83 Linux /dev/sdb2 36473+ 121600- 85128- 683789062+ 83 Linux /dev/sdb3 0 - 0 0 0 Empty /dev/sdb4 0 - 0 0 0 Empty

  Read the article

• Compress with Gzip or Deflate my CSS & JS files

  - by muhammad usman

  i ve a fashion website & using wordpress. I want to Compress or Gzip or Deflate my CSS & JS files. i have tried many codes with .htaccess to compress but not working. Would any body help me please? My phpinfo is http://deemasfashion.co.uk/1.php below are the codes i have tried not not working. Few of them might be same but there is a difference in the syntax. <ifModule mod_gzip.c> mod_gzip_on Yes mod_gzip_dechunk Yes mod_gzip_item_include file .(html?|txt|css|js|php|pl)$ mod_gzip_item_include handler ^cgi-script$ mod_gzip_item_include mime ^text/.* mod_gzip_item_include mime ^application/x-javascript.* mod_gzip_item_exclude mime ^image/.* mod_gzip_item_exclude rspheader ^Content-Encoding:.*gzip.* </ifModule> other code I have tried but not working... <files *.css> SetOutputFilter DEFLATE </files> <files *.js> SetOutputFilter DEFLATE </files> I have also tried this code as well but no success. <ifModule mod_gzip.c> mod_gzip_on Yes mod_gzip_dechunk Yes mod_gzip_item_include file \.(html?|txt|css|js|php|pl)$ mod_gzip_item_include handler ^cgi-script$ mod_gzip_item_include mime ^text/.* mod_gzip_item_include mime ^application/x-javascript.* mod_gzip_item_exclude mime ^image/.* mod_gzip_item_exclude rspheader ^Content-Encoding:.*gzip.* </ifModule> This code is also not working <FilesMatch "\.(html?|txt|css|js|php|pl)$"> SetOutputFilter DEFLATE </FilesMatch> Here is another code not working. <ifmodule mod_deflate.c> AddOutputFilterByType DEFLATE text/text text/html text/plain text/xml text/css application/x- javascript application/javascript </ifmodule> Here is another code not working. <IFModule mod_deflate.c> <filesmatch "\.(js|css|html|jpg|png|php)$"> SetOutputFilter DEFLATE </filesmatch> </IFModule> Here is another code not working. <IfModule mod_deflate.c> AddOutputFilterByType DEFLATE text/html text/plain text/xml text/css application/x-javascript text/javascript application/javascript application/json <FilesMatch "\.(css|js)$" > SetOutputFilter DEFLATE </FilesMatch> </IfModule> Here is another code not working. #Gzip - compress text, html, javascript, css, xml <ifmodule mod_deflate.c> AddOutputFilterByType DEFLATE text/plain AddOutputFilterByType DEFLATE text/html AddOutputFilterByType DEFLATE text/xml AddOutputFilterByType DEFLATE text/css AddOutputFilterByType DEFLATE application/xml AddOutputFilterByType DEFLATE application/xhtml+xml AddOutputFilterByType DEFLATE application/rss+xml AddOutputFilterByType DEFLATE application/javascript AddOutputFilterByType DEFLATE application/x-javascript </ifmodule> #End Gzip Here is another code not working. <Location /> SetOutputFilter DEFLATE SetEnvIfNoCase Request_URI \.(?:gif|jpe?g|png)$ no-gzip dont-vary SetEnvIfNoCase Request_URI \.(?:exe|t?gz|zip|gz2|sit|rar)$ no-gzip dont-vary </Location>

  Read the article

• Could you share your emacs dot-files for web development

  - by Gok Demir

  Hi, could you kindly share your emacs dot-files for web development that works with CSS, HTML, JavaScript, PHP and if possible with Python Django. I really need complete setup. I looked nXhtml and its good on some parts (html code completion works but sucks on indentation and CSS code completion does not work and says tag table is empty most cases. I really need something that works: code completion works out of the box, git integration and pretty indentation and supports multi-mode for mixed HTML, CSS, JavaScript, PHP code.

  Read the article

• Using smartctl to get vendor specific Attributes from ssd drive behind a SmartArray P410 controller

  - by Lairsdragon

  Hi! Recently I have deployed some HP server with SSD's behind a SmartArray P410 controller. While not official supported from HP the server work well sofar. Now I like to get wear level info's, error statistics etc from the drive. While the SA P410 supports a passthru of the SMART Command to a single drive in the array the output I was not able to the the interesting things from the drive. In this case especially the value the Wear level indicator is from interest for me (Attr.ID 233), but this is ony present if the drive is directly attanched to a SATA Controller. smartctl on directly connected ssd: # smartctl -A /dev/sda smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 5 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 3 Spin_Up_Time 0x0000 100 000 000 Old_age Offline In_the_past 0 4 Start_Stop_Count 0x0000 100 000 000 Old_age Offline In_the_past 0 5 Reallocated_Sector_Ct 0x0002 100 100 000 Old_age Always - 0 9 Power_On_Hours 0x0002 100 100 000 Old_age Always - 8561 12 Power_Cycle_Count 0x0002 100 100 000 Old_age Always - 55 192 Power-Off_Retract_Count 0x0002 100 100 000 Old_age Always - 29 232 Unknown_Attribute 0x0003 100 100 010 Pre-fail Always - 0 233 Unknown_Attribute 0x0002 088 088 000 Old_age Always - 0 225 Load_Cycle_Count 0x0000 198 198 000 Old_age Offline - 508509 226 Load-in_Time 0x0002 255 000 000 Old_age Always In_the_past 0 227 Torq-amp_Count 0x0002 000 000 000 Old_age Always FAILING_NOW 0 228 Power-off_Retract_Count 0x0002 000 000 000 Old_age Always FAILING_NOW 0 smartctl on P410 connected ssd: # ./smartctl -A -d cciss,0 /dev/cciss/c1d0 smartctl 5.39.1 2010-01-28 r3054 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net (Right, it is complety empty) smartctl on P410 connected hdd: # ./smartctl -A -d cciss,0 /dev/cciss/c0d0 smartctl 5.39.1 2010-01-28 r3054 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net Current Drive Temperature: 27 C Drive Trip Temperature: 68 C Vendor (Seagate) cache information Blocks sent to initiator = 1871654030 Blocks received from initiator = 1360012929 Blocks read from cache and sent to initiator = 2178203797 Number of read and write commands whose size <= segment size = 46052239 Number of read and write commands whose size > segment size = 0 Vendor (Seagate/Hitachi) factory information number of hours powered up = 3363.25 number of minutes until next internal SMART test = 12 Do I hunt here a bug, or is this a limitation of the p410 SMART cmd Passthru?

  Read the article

• Differences in memory consumption between two identical D7 sites?

  - by aendrew

  I'm running Drupal on a news site that has a lot of different View blocks on the front page (~5 total, all cached). In trying to reduce the memory footprint of the site, I've checked out source from SVN to a local development install to try and convert some of those blocks into more optimized code. Here's the weird thing. Devel module lists memory consumption at 50mb on the Production site (Running Nginx, PHP 5.2.17, XCache and Zend Optimizer.) but only 14mb on my development site (Running Apache2, PHP 5.2.13 and XCache). These are nearly-identical versions of the same site — frankly, the Production site should use even less memory as I've disabled some of the modules running on the Dev site. Any idea why this might be the case?

  Read the article

• Getting "-bash: fork: Resource temporarily unavailable" in OSX

  - by Joseph Tura

  I seem to run into problems with the max. number of processes every so often. Anyone know what is best practice for fixing this? Running OSX 10.6 on a MacBook Pro i7. ulimit -a returns these values: core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited file size (blocks, -f) unlimited max locked memory (kbytes, -l) unlimited max memory size (kbytes, -m) unlimited open files (-n) 256 pipe size (512 bytes, -p) 1 stack size (kbytes, -s) 8192 cpu time (seconds, -t) unlimited max user processes (-u) 266 virtual memory (kbytes, -v) unlimited When the error occurred I checked, and there were 102 running tasks and 523 threads.

  Read the article

• Multiple ServerRoot directives in single apache

  - by fip

  i came across a apache httpd 2.2 configuration recently in which multiple ServerRoot-directives were defined, each followed by individual prefork Settings. Sort of like this: ServerRoot root1 <IfModule prefork.c> StartServers 5 MinSpareServers 5 MaxSpareServers 10 MaxClients 150 MaxRequestsPerChild 0 </IfModule> [vhost-configs] ServerRoot root2 <IfModule prefork.c> StartServers 10 MinSpareServers 10 MaxSpareServers 20 MaxClients 250 MaxRequestsPerChild 0 </IfModule> [vhost-configs] In my understanding these are global settings one overriding the other. But is that true and is it still true with the second ServerRoot directive between the prefork blocks? Thank you in advance EDIT They are not in different conditional blocks and both server roots are used in that way that files with relative paths to both are correctly included. I just wondered if a <ServerRoot> would initiate a new scope in which all global statements would not override the configuration of previous ones.

  Read the article

• Linux not picking up new partition correctly on emc pseudo device

  - by James

  Hi We have a database server running oracle rac. We were recently running out of space on the main LUN that it is attached to. I created a new 100GB LUN and concatenated this onto the existing LUN creating a new MetaLUN. After some messing I managed to get linux to recognise the new space. I then created a new partition in on the pseudo device, to use the new space. Previously when I have done this on other system the next step is to create an ASM disk on the new partition and add this disk to the oracle disk group. This however fails. I am aware of various issues with ASM and powerpath, but I don't think this is the issue here. As on while investigating the issue I discovered that one of the underlying logical device is not reflecting the size change. See below; Powermt displays all of the underlying logical units [root@XXXXX~]# powermt display dev=emcpowerd Pseudo name=emcpowerd CLARiiON ID=CKM00091500009 [VFRAC2] Logical device ID=6006016030312200787502866C65DE11 [LUN 30] state=alive; policy=CLAROpt; priority=0; queued-IOs=0 Owner: default=SP A, current=SP A Array failover mode: 1 ============================================================================== ---------------- Host --------------- - Stor - -- I/O Path - -- Stats --- ### HW Path I/O Paths Interf. Mode State Q-IOs Errors ============================================================================== 3 qla2xxx sde SP A0 active alive 0 0 3 qla2xxx sdj SP B0 active alive 0 0 4 qla2xxx sdo SP A1 active alive 0 0 4 qla2xxx sdt SP B1 active alive 0 0 Fdisk on the pseudo device shows correct space. [root@XXXXX ~]# fdisk -l /dev/emcpowerd Disk /dev/emcpowerd: 429.4 GB, 429496729600 bytes 255 heads, 63 sectors/track, 52216 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/emcpowerd1 1 39162 314568733+ 83 Linux /dev/emcpowerd2 39163 52216 104856255 83 Linux fdisk on one of the logical units is wrong [root@XXXXX~]# fdisk -l /dev/sde Disk /dev/sde: 322.1 GB, 322122547200 bytes 255 heads, 63 sectors/track, 39162 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sde1 1 39162 314568733+ 83 Linux /dev/sde2 39163 52216 104856255 83 Linux fdisk on the rest of the units is fine [root@XXXXX ~]# fdisk -l /dev/sdj Disk /dev/sdj: 429.4 GB, 429496729600 bytes 255 heads, 63 sectors/track, 52216 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdj1 1 39162 314568733+ 83 Linux /dev/sdj2 39163 52216 104856255 83 Linux Also when I created the the partition linux did not create the any entries in the /dev directory for the second partition so I created these manually [root@XXXXX dev]# mknod sde2 b 8 66 [root@XXXXX dev]# ls -al sd[ejot]? brw-r----- 1 root disk 8, 65 Dec 29 14:20 sde1 brw-r--r-- 1 root disk 8, 66 Apr 8 20:31 sde2 brw-r----- 1 root disk 8, 145 Dec 29 14:19 sdj1 brw-r--r-- 1 root disk 8, 146 Apr 8 20:33 sdj2 brw-r----- 1 root disk 8, 225 Apr 6 23:12 sdo1 brw-r--r-- 1 root disk 8, 226 Apr 8 20:33 sdo2 brw-r----- 1 root disk 65, 49 Dec 29 14:19 sdt1 brw-r--r-- 1 root disk 65, 50 Apr 8 20:33 sdt2 This is a production server that we cannot easily reboot. Any ideas would be much appreciated. J

  Read the article

• Accessing GMail when blocked

  - by user1413

  My corp blocks Gmail. Is there any way to access it?

  Read the article

• Single file changed: intrusion or corruption?

  - by Michaël Witrant

  rkhunter reported a single file change on a virtual server (netstat binary). It didn't report any other warning. The change was not the result of a package upgrade (I reinstalled it and the checksum is back as it was before). I'm wondering whether this is a file corruption or an intrusion. I guess an intrusion would have changed many other files watched by rkhunter (or none if the intruder had access to rkhunter's database). I disassembled both binaries with objdump -d and stored the diff here: https://gist.github.com/3972886 The full dump diff generated with objdump -s is here : https://gist.github.com/3972937 I guess a file corruption would have changed either large blocks or single bits, not small blocks like this. Do these changes look suspicious? How could I investigate more? The system is running Debian Squeeze.

  Read the article

• Xpath automatization software

  - by holms

  Too sad this topic was closed. But I'm kind of a having the same question. I want to construct xpathes, for common html block which appears on page. For example: you can give two URLs to that software, which will contain SAME html blocks (divs) , but having different content in it. by giving 2 stackoverflow.com url's, software could detect that same div#id is being used once again, and just give XPATH'es of those html blocks like for example. Of course I can find xpath'es my self, as far as I remember, firebug makes it easy,shows xpath of every html block, but this is kind of hard procedure if you want to get xpath'es for LOTS of html elements. so that's why I want this kind of software to help in this routine.

  Read the article

< Previous Page | 406 407 408 409 410 411 412 413 414 415 416 417  | Next Page >