Search Results

Search found 15323 results on 613 pages for 'db2 connect'.

Page 410/613 | < Previous Page | 406 407 408 409 410 411 412 413 414 415 416 417  | Next Page >

• Could I replace a stock PSU fan with a more quiet one?

  - by GaryJL

  I have a cheap 450W PSU with an exhaust fan at the rear. This fan, however, is very loud. Is it a good idea to replace the stock PSU fan with a quiet fan with similar airflow? The PSU fan is hard-wired to the PCB in the PSU so I was intending on snipping the stock fan wires and sealing the loose ends with electrical tape. I would then connect the new quiet fan to the PWR_FAN socket on the motherboard. Has anyone done this before themselves? Is it a good idea in the first place? Considering if my PSU fails, it could take out a couple of other components too.

  Read the article

• What to do if people can't ping me?

  - by slayerIQ

  Today, I installed my new router so I can connect my other pc and my ps3. In my network, there are some other computers these are connected with each other through another router. So I have one modem with 2 routers that make up my network. Everything works fine the only problem I am having is being pinged by other computers in the network. All the computers are on the same subnet 255.255.255.0. There is no problem with my firewall or anything I tested everything. How can I solve this?

  Read the article

• getaddrinfo(3) failed

  - by user101289

  I'm trying to connect to a webservice using a PHP wrapper (which is using curl under the covers). On my local linux machine running PHP 5.3 it works perfectly. However, when I move to a remote server (also running PHP 5.3 on Linux) the call the the webservice URL returns: getaddrinfo(3) failed for http://server.host.com:8080/login I get a similar error from a ping on the remote host: ping: unknown host http://server.host.com:8080/login But when I issue a curl request from the command line, it returns the expected URL. Can anyone shed any light on this issue? Thanks!

  Read the article

• Virtual PC "The page cannot be displayed" error connecting to iis7.5 site on Win7 host.

  - by stan

  I setup virtual pc with the Windows XP IE6 VHD to test a site on Windows 7 host. I created a loopback adapter connection on the host. I have several sites on IIS 7.5, I'm able to connect to all of them except one. And it's the site I need to test... I get "The page cannot be displayed" error. The site loads fine from the host(Windows 7). I've made sure the permissions match that of the other sites that do load. I've recreated the application in IIS manager. Does anyone know what the problem might be?

  Read the article

• How to change the terminal to SCO compliant in Ubuntu

  - by kaushik

  I have a server in which SCO 5.x is installed. I have several thin clients which were supplied from our head office. Those thin clients have linux pre-installed in them. When we tried to connect to our SCO server, we have found out that the thin client does not support SCO terminal type. So the program (Which is written in Oracle forms) is not working correctly. Lots of function keys stopped working and screen also not getting refreshed correctly. Hence we decided to use Ubuntu Live USB keys in thin clients. Now the problem is how can we change the terminal type to SCO in ubuntu ? Means I want it in the text terminal (Alt+Ctrl+F1,F2...) (Not in xterm...graphical terminal emulators). Does ubuntu support SCO terminal type ?

  Read the article

• Programtically get the Wireless lan config of a machine and use netsh to setup new profile

  - by Maestro1024

  Programtically get the Wireless lan config of a machine and use netsh to setup new profile I am having trouble getting the netsh command to set the ssid of a new card. I installed the drivers and plugged it in. I see in ipconfig it says the "media is disconnected" (fair enough). I then send the following command netsh wlan connect name=profile1 ssid=myNetwork interface="Wireless Network Connection 2" problem is I get an error "There is no profile "profile1" assigned to the specified interface. What is a profile for a wireless card? What should I set it to? How Can I get my SSID set and connected for the card.

  Read the article

• Wired Connection Problem

  - by Dave

  After upgrading to 12.04 my interent connection no longer works. More precisely it is really, really, slow, and occasionally will connect, but do so only for a few moments and then disappear again. I am on a Lenovo Workstation e20. Output of ifconfig: eth0 Link encap:Ethernet HWaddr 70:f3:95:00:64:3e inet addr:192.168.1.20 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::72f3:95ff:fe00:643e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:7398 errors:0 dropped:74 overruns:0 frame:0 TX packets:6684 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:5407828 (5.4 MB) TX bytes:854343 (854.3 KB) Interrupt:20 Memory:fb120000-fb140000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1587 errors:0 dropped:0 overruns:0 frame:0 TX packets:1587 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:152089 (152.0 KB) TX bytes:152089 (152.0 KB) I am really at a loss for what to do. I am relatively new to Ubuntu, searched the other user questions and couldn't figure this out.

  Read the article

• Blogger Blog Takes Ages to Load after Custom Domain Redirection

  - by abhisek

  I recently bought a custom domain for a blogger blog (technabled.com) I have for sometime now. I followed the instructions on blogger's documentation. I added A-name records and CNAME records with my DNS provider. But, now, some strange problems are cropping up. If I connect to my broadband network and then ping technabled.com, it times out. Then, if I visit the webpage, which takes almost one and half minutes to load, and then if I ping technabled.com, it shows expected result. This is not just me. I asked some of the regular readers, who reported the same issue. As a result of this, I am losing a lot of visits. What is stranger is that the subsequent visits to the blog is faster. I have checked with a few online services to test the performance. WebPageTest seems to say the same thing: http://www.webpagetest.org/result/110117_1N_7PE/ (please see the First View / Repeat View time) Also, the pagespeed score is not that bad. So I am ruling out other possibilities. I am at a loss as to what I should do to find a solution. Help is much appreciated. :)

  Read the article

• How do I make subsonic (media server) work with SSL?

  - by John Baber

  The roughly out-of-the-box setup as a regular user works fine (meaning the site appears at http://myserver.com:4040). From ps aux java -Xmx100m -Dsubsonic.home=/var/subsonic -Dsubsonic.host=0.0.0.0 -Dsubsonic.port=4040 -Dsubsonic.httpsPort=0 -Dsubsonic.contextPath=/ -Dsubsonic.defaultMusicFolder=/var/music -Dsubsonic.defaultPodcastFolder=/var/music/Podcast -Dsubsonic.defaultPlaylistFolder=/var/playlists -Djava.awt.headless=true -verbose:gc -jar subsonic-booter-jar-with-dependencies.jar but just giving an https port java -Xmx100m -Dsubsonic.home=/var/subsonic -Dsubsonic.host=0.0.0.0 -Dsubsonic.port=4040 -Dsubsonic.httpsPort=6060 -Dsubsonic.contextPath=/ -Dsubsonic.defaultMusicFolder=/var/music -Dsubsonic.defaultPodcastFolder=/var/music/Podcast -Dsubsonic.defaultPlaylistFolder=/var/playlists -Djava.awt.headless=true -verbose:gc -jar subsonic-booter-jar-with-dependencies.jar makes http://myserver.com:4040 say HTTP ERROR: 404 NOT_FOUND RequestURI=/index.view Powered by jetty:// and https://myserver.com:6060 say Unable to connect I'm only making the change by doing # SUBSONIC_ARGS="--port=80 --https-port=443 --max-memory=120" SUBSONIC_ARGS="--max-memory=100 --https-port=6060" in /etc/default/subsonic and issuing a sudo service subsonic restart (this is Ubuntu Oneiric)

  Read the article

• Can T520+Bumblebee run an external monitor via DisplayPort?

  - by Fen

  Using 64-bit Ubuntu 11.10 and integrated (Intel) graphics, I can run the 1600x900 laptop display plus a 1600x1200 external monitor connected to the VGA adapter. But my external monitor is 1920x1200 so I have black stripes on each side. I believe the resolution is limited like this as the maximum resolution available from the Intel GPU is 2560x1600 = 4,096,000 pixels and I'm asking for a 3520x1200 = 4,224,000 display (with 1200x300 lost above the laptop screen). At 3200x1200 = 3,840,000 pixels, the Intel GPU seems happy. Under Windows, the same limit exists when using the VGA adapter, but if I turn Optimus on then I can connect the external monitor to the DisplayPort and get its full resolution and an extended desktop. I've seen that Bumblebee can run apps on the DisplayPort using the 'optirun' command. My question is: can Bumblebee run the DisplayPort in concert with the Intel card running the laptop screen creating a large virtual desktop (as on Windows)? If so, are there any pointers to how to do this? I tried once, failed, and dropped back to Integrated Graphics (and black stripes) as I could find no reports of this configuration working.

  Read the article

• Web site kills hard disk I/O, how to prevent?

  - by Taras Voynarovsky

  The situation: I have a server, on which we have 2-3 projects. Starting not long ago, the server started hanging up (We could not connect to it by ssh, and the connected clients had to wait 20 minutes for top to give results) Early today I managed to execute gstat while it was in this state and saw, that it stays on 100% on da0, da0s1 and da0s1f. I dont quite know what those ids meen, but I understand that some processes just kill the HD by bombing it down with requests. I ask of some propositions. I dont know how to find the culpit and can't prevent this. I have freebsd on server.

  Read the article

• ubuntu 12.10 Lenovo b570e, WiFi connected but not working

  - by koogee

  I'm running ubuntu 12.10 liveUSB on a lenovo b570e. It has an atheros wifi card that connects with my home network but I can't browse AT ALL. My network is multiple clients --> router --> isp modem --> Internet I can ping my router (192.168.0.1) but not my isp's modem(192.168.15.1). I have 3 other computers connected to the same router that are working fine (infact i'm posting from one) ping -c 3 google.com unknown host google.com ping -c 3 8.8.8.8 shows 100% packet loss I think its some networking issue. I tried directly connecting it to the router via ethernet cable but same issue. It gets an ip, shows LAN connected but can't browse. If I connect it directly to the isp modem via ethernet cable it starts working fine. Connection Information shows: Interface: 802.11 wifi (wlan0) driver: ath9k security: wpa/wpa2 speed: 150mb/s ip: 192.168.0.106 broadcast: 192.168.0.255 subnet:255.255.255.0 default route: 192.168.0.1 primary dns: 192.168.15.1 i have restarted the router and modem many times. Rebooted the LiveUSB many times.

  Read the article

• Iptables REDIRECT + openvpn problem

  - by Emilio

  I want to redirect connection to port 22 to my openvpn binded port, on 60001. Openvpn is running on server on 60001 server:~$ sudo netstat -apn | grep openvpn udp 0 0 67.xx.xx.137:60001 0.0.0.0:* 4301/openvpn I redirect on server port 22 to 60001 server:~$ sudo iptables -F -t nat server:~$ sudo iptables -A PREROUTING -t nat -p udp --dport 22 -j REDIRECT --to-ports 60001 I start openvpn client (openvpn.conf is correct, it works with remote IP 22 replaced with remote IP 60001) client:~$ ./openvpn openvpn.conf Tue Apr 27 00:42:50 2010 OpenVPN 2.1.1 i686-pc-linux-gnu [SSL] [EPOLL] built on Mar 23 2010 Tue Apr 27 00:42:50 2010 UDPv4 link local (bound): [undef]:1194 Tue Apr 27 00:42:50 2010 UDPv4 link remote: 67.xx.xx.137:22 Tue Apr 27 00:42:52 2010 read UDPv4 [ECONNREFUSED]: Connection refused (code=111) Tue Apr 27 00:42:55 2010 read UDPv4 [ECONNREFUSED]: Connection refused (code=111) ... It doesn't connect. iptables shows requests from client to server but no answers. What's wrong with it?

  Read the article

• linux intrusion detection software

  - by Sam Hammamy

  I have an Ubuntu VPS that I use for practice and deploying prototypes as I am a python developer. I recently started teaching my self sys admin tasks, like installing OpenLDAP. I happened to turn off the ufw firewall for just a minute, and when I ran an netstat command, I saw a foreign ip connected to ssh that I traced to china. I'd like to know a few things: 1) Is there any good network intrusion detection software, such that if any IP that's outside a specific range connects to the VPN, I can be notified? -- I am thinking about scripting this, but I'm pretty sure there's something useful out there and I believe in the wisdom of crowds. 2) How did this person gain access to my server? Is it because my firewall was down? Or is it because they browsed my LDAP directory and from there figured out a way to connect (there was a clear text password in the tree but it wasn't one used by the server's sshd)?

  Read the article

• Laptop loses signal from WiFi router, but mobile phone holds it fine

  - by Anton

  Hi, I have an extremely weird issue with my WiFi router. Both Ubuntu & Windows 7 can connect to it fine, but after 5-10 minutes browser (any one) stops opening pages and tells me it cannot resolve host address. But, at the same time, tools like Skype or BitTorrent work without any issues. I can also browse Internet on my mobile phone connected to the very same router. If I reset router it helps, but after 5-10 minutes I see just the same problem... Ubuntu tells me that WiFi signal is lost (mobile sees it), Windows 7 just won't let me browse anywhere. Can anyone give me a suggestion on this, please? Thanks

  Read the article

• routing weirdness - traceroute 'vanishes' en route

  - by The Journeyman geek

  I'm attempting to set up one of my boxes as a server (again), but i'm having some odd connection issues- the box itself connects fine to the internet, but trying to connect to my external ip address seems to result in the trace getting 'lost' partway. http://pastebin.com/HCQAGbvn - this is a traceroute from another system that's connected to another ISP - starhub is my own one, while i have another system that i have access to on singtel. I'm wondering if my ISP is messing around with routing, or is something very odd going on. As you note, the traceroute dosen't reach me, but if it helps, i use a dd-wrt router. edit: Facepalmishly, turning the firewall on my router on and off fixed it. I don't get why it dropped off at different ip addresses each time, or why the router set it self to block.. everything, or why it affected the ipv6 tunnel as well.

  Read the article

• Postfix not delivering mails

  - by Sotocan

  Hi all, I have problems with a recently configured postfix MTA. When postfix starts the following warning appears: "postfix/qmgr[5078]: warning: connect to transport private/filter: No such file or directory" I have amavis-new as a content-filter, but even if I comment-out the relevant line, the warning appears. As a result (I think), of the above, I get errors like below, for every virtual domain that I have: "postfix/error[5080]: 254851834107: to=, relay=none, delay=13082, delays=13082/0.01/0/0.01, dsn=4.3.0, status=deferred (mail transport unavailable)" The good news for me, is that somehow I managed to fix that (don't ask me how!!!!) The problem is that now I have 50 or so mails, that were affected by the aforementioned problem, in the mail-queue... If I "postqueue -f " I get the same style of error as before (mail transport unavailable)...however new mails are delivered to their final destination properly... Any suggestions? Kind regards. P.S. Local mail delivery from/to Unix and virtual users, was OK write from the beginning!

  Read the article

• Squeezebox server on Mac OS 10.6

  - by jonathancaryl

  I want to run Squeezebox server on my Mac running OS 10.6 Snow Leopard. The Firewall settings on 10.6 now let you speciy by Application things that are allowed to connect through the firewall. But Squeezebox server isn't an application, so I can't select it. If I turn the firewall off, it works fine. This is a reasonable step for a desktop (as it's always connecting to the 'net through the router's firewall) but on a laptop that connects via public WiFi it doesn't seem like a good idea. Help!

  Read the article

• CentOS 6 - iptables preventing web access via port 80

  - by bsod99

  I'm setting up a new web server with CentOS 6.2 and am not able to connect via the web. Everything looks set up correctly in httpd.conf and Apache is running, so I'm assuming it's an iptables issue. Is there anything in the following which could be causing the issue? # iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT icmp -- anywhere anywhere ACCEPT all -- anywhere anywhere ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:ssh REJECT all -- anywhere anywhere reject-with icmp-host-prohibited ACCEPT tcp -- anywhere anywhere tcp dpt:http Chain FORWARD (policy ACCEPT) target prot opt source destination REJECT all -- anywhere anywhere reject-with icmp-host-prohibited Chain OUTPUT (policy ACCEPT)

  Read the article

• Bluetooth connectivity

  - by Viniketa

  computer: Samsung All in One PC OS: Windows 7 (up-to-date) BT Radio: Broadcom I have Bluetooth speakers I have successfully used with the system in the past. In fact, I had them set as default speakers so audio would transfer when I turned them on. No longer. Now, they show as 'disconnected'. Asking for connection gives no response. Option to set as default is greyed out. Bluetooth view utility gives an error of 10049 when I try to connect (supposedly, the means an invalid device address). I uninstalled the device and re-installed. No help. Any advice? Thanks in advance.

  Read the article

• how to figure out why sites on my server aren't loading

  - by Derek

  I seem to randomly receive "page cannot load, cannot connect to server" errors for sites on one of my servers. when this happens, it seems to only happen on certain IPs or IP ranges at a time. I say this because while I'll get the error from my home laptop I'll be able to access the site fine from my work computer or from an offsite VPS. DNS records should already be fully propagated as these records were updated months ago. I have no idea how to diagnose what's going on. Is there a tool in cpanel or outside on the web that can help me figure out what's going on?

  Read the article

• WDS (Wireless Distribution System) not work [migrated]

  - by xdevel2000

  I've a dlink di-524 as main router (192.168.0.1) connected to Internet and a second router (192.168.0.2), a tplink wr841n, with WDS enabled and correctly configured to "join" with dlink. After I connect via wireless a laptop (192.168.0.100) to tplink and both work good but with the laptop I can't go to Internet. It seems as WDS not work. With the laptop I can only ping the tplink but other ping (the dlink or other LAN computer not responding). What's the problem? Perhaps also the dlink must have the WDS option? Thanks.

  Read the article

• Is it effective installing firewall within same machine which offering service?

  - by Eonil

  I'm a starting a small service practically. And I have single server currently. No money to purchase separated/dedicated firewall equipment now. Is it effective installing firewall software on same machine which offering internet service? My server will offer HTTP, NFS, and SSH, and custom made server software on a several ports. (edit) All services (except NFS) should be open to internet. Not internal services. I guess my machine (virtualized within Xen) is connected to the internet directly because I can connect to my machine SSH with only IP address. (edit) NFS is not open to internet. Sorry for my mistake. NFS will be served via SSH only.

  Read the article

• IIS7 folder permissions

  - by Eanna

  I build a basic WCF service that I now want to host in IIS7 under Windows Server 2008 R2. I added the service as an application under the default web site but whenever i try to run the application I get the following error: HTTP Error 500.19 - Internal Server Error The requested page cannot be accessed because the related configuration data for the page is invalid. Config Error - Cannot read configuration file due to insufficient permissions The only way I can get this service working is if i choose to "connect as" the server Administrator when adding the service. the "application user (pass-through authentication)" option does not seem to work. Could anyone help me out, I've just started using IIS7 and have no idea what to do... Thanks

  Read the article

• TCP > COM1 for receiving messages and displaying on POS display pole

  - by JakeTheSnake

  I currently have a Java Applet running on my web page that communicates to a display pole via COM1. However since the Java update I can no longer run self-signed Java Applets and I figure it would just be easier to send an AJAX request back to the server and have the server send a response to a TCP port on the computer...the computer would need a TCP COM virtual adapter. How do I install a virtual adapter to go from a TCP port to COM1? I've looked into com0com and that is just confusing as hell to me, and I don't see how to connect any ports to COM1. I've tried tcp2com but it doesn't seem to install the service in Windows 7 x64. I've tried com2tcp and the interface seems like it WOULD work (I haven't tested), but I don't want an app running on the desktop...it needs to be a service that runs in the background. So to summarize how it would work: Web page on comp1 sends AJAX request to server Server sends text response to comp1 on port 999 comp1 has virtual COM port listening on port 999, sends data to COM1 pole displays data

  Read the article

< Previous Page | 406 407 408 409 410 411 412 413 414 415 416 417  | Next Page >