Search Results

Search found 10285 results on 412 pages for 'enterprise repository'.

Page 410/412 | < Previous Page | 406 407 408 409 410 411 412  | Next Page >

  • Network Logon Issues with Group Policy and Network

    - by bobloki
    I am gravely in need of your help and assistance. We have a problem with our logon and startup to our Windows 7 Enterprise system. We have more than 3000 Windows Desktops situated in roughly 20+ buildings around campus. Almost every computer on campus has the problem that I will be describing. I have spent over one month peering over etl files from Windows Performance Analyzer (A great product) and hundreds of thousands of event logs. I come to you today humbled that I could not figure this out. The problem as simply put our logon times are extremely long. An average first time logon is roughly 2-10 minutes depending on the software installed. All computers are Windows 7, the oldest computers being 5 years old. Startup times on various computers range from good (1-2 minutes) to very bad (5-60). Our second time logons range from 30 seconds to 4 minutes. We have a gigabit connection between each computer on the network. We have 5 domain controllers which also double as our DNS servers. Initial testing led us to believe that this was a software problem. So I spent a few days testing machines only to find inconsistent results from the etl files from xperfview. Each subset of computers on campus had a different subset of software issues, none seeming to interfere with logon just startup. So I started looking at our group policy and located some very interesting event ID’s. Group Policy 1129: The processing of Group Policy failed because of lack of network connectivity to a domain controller. Group Policy 1055: The processing of Group Policy failed. Windows could not resolve the computer name. This could be caused by one of more of the following: a) Name Resolution failure on the current domain controller. b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller). NETLOGON 5719 : This computer was not able to set up a secure session with a domain controller in domain OURDOMAIN due to the following: There are currently no logon servers available to service the logon request. This may lead to authentication problems. Make sure that this computer is connected to the network. If the problem persists, please contact your domain administrator. E1kexpress 27: Intel®82567LM-3 Gigabit Network Connection – Network link is disconnected. NetBT 4300 – The driver could not be created. WMI 10 - Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected. More or less with timestamps it becomes apparent that the network maybe the issue. 1:25:57 - Group Policy is trying to discover the domain controller information 1:25:57 - The network link has been disconnected 1:25:58 - The processing of Group Policy failed because of lack of network connectivity to a domain controller. This may be a transient condition. A success message would be generated once the machine gets connected to the domain controller and Group Policy has successfully processed. If you do not see a success message for several hours, then contact your administrator. 1:25:58 - Making LDAP calls to connect and bind to active directory. DC1.ourdomain.edu 1:25:58 - Call failed after 0 milliseconds. 1:25:58 - Forcing rediscovery of domain controller details. 1:25:58 - Group policy failed to discover the domain controller in 1030 milliseconds 1:25:58 - Periodic policy processing failed for computer OURDOMAIN\%name%$ in 1 seconds. 1:25:59 - A network link has been established at 1Gbps at full duplex 1:26:00 - The network link has been disconnected 1:26:02 - NtpClient was unable to set a domain peer to use as a time source because of discovery error. NtpClient will try again in 3473457 minutes and DOUBLE THE REATTEMPT INTERVAL thereafter. 1:26:05 - A network link has been established at 1Gbps at full duplex 1:26:08 - Name resolution for the name %Name% timed out after none of the configured DNS servers responded. 1:26:10 – The TCP/IP NetBIOS Helper service entered the running state. 1:26:11 - The time provider NtpClient is currently receiving valid time data at dc4.ourdomain.edu 1:26:14 – User Logon Notification for Customer Experience Improvement Program 1:26:15 - Group Policy received the notification Logon from Winlogon for session 1. 1:26:15 - Making LDAP calls to connect and bind to Active Directory. dc4.ourdomain.edu 1:26:18 - The LDAP call to connect and bind to Active Directory completed. dc4. ourdomain.edu. The call completed in 2309 milliseconds. 1:26:18 - Group Policy successfully discovered the Domain Controller in 2918 milliseconds. 1:26:18 - Computer details: Computer role : 2 Network name : (Blank) 1:26:18 - The LDAP call to connect and bind to Active Directory completed. dc4.ourdomain.edu. The call completed in 2309 milliseconds. 1:26:18 - Group Policy successfully discovered the Domain Controller in 2918 milliseconds. 1:26:19 - The WinHTTP Web Proxy Auto-Discovery Service service entered the running state. 1:26:46 - The Network Connections service entered the running state. 1:27:10 – Retrieved account information 1:27:10 – The system call to get account information completed. 1:27:10 - Starting policy processing due to network state change for computer OURDOMAIN\%name%$ 1:27:10 – Network state change detected 1:27:10 - Making system call to get account information. 1:27:11 - Making LDAP calls to connect and bind to Active Directory. dc4.ourdomain.edu 1:27:13 - Computer details: Computer role : 2 Network name : ourdomain.edu (Now not blank) 1:27:13 - Group Policy successfully discovered the Domain Controller in 2886 milliseconds. 1:27:13 - The LDAP call to connect and bind to Active Directory completed. dc4.ourdomain.edu The call completed in 2371 milliseconds. 1:27:15 - Estimated network bandwidth on one of the connections: 0 kbps. 1:27:15 - Estimated network bandwidth on one of the connections: 8545 kbps. 1:27:15 - A fast link was detected. The Estimated bandwidth is 8545 kbps. The slow link threshold is 500 kbps. 1:27:17 – Powershell - Engine state is changed from Available to Stopped. 1:27:20 - Completed Group Policy Local Users and Groups Extension Processing in 4539 milliseconds. 1:27:25 - Completed Group Policy Scheduled Tasks Extension Processing in 5210 milliseconds. 1:27:27 - Completed Group Policy Registry Extension Processing in 1529 milliseconds. 1:27:27 - Completed policy processing due to network state change for computer OURDOMAIN\%name%$ in 16 seconds. 1:27:27 – The Group Policy settings for the computer were processed successfully. There were no changes detected since the last successful processing of Group Policy. Any help would be appreciated. Please ask for any relevant information and it will be provided as soon as possible.

    Read the article

  • Profile creation process stuck halfway Websphere

    - by ngubk
    I'm creating a cell profile on Linux Mint 12 , WAS 8.0 Network Deployment Trial. But using manageProfiles.sh or Profile Management Tool, I can not create any profile (cell, application ...). When I check the log file, the profile creation process is always stop halfway (does not show any error, just stuck there). The log is always like this <record> <date>2012-11-02T04:11:15</date> <millis>1351847475108</millis> <sequence>2985</sequence> <logger>com.ibm.ws.install.configmanager.actionengine.ant.utils.ANTLogToCmtLogAdapter</logger> <level>INFO</level> <class>com.ibm.ws.install.configmanager.actionengine.ant.utils.ANTLogToCmtLogAdapter</class> <method>messageLogged</method> <thread>0</thread> <message>replacing value for user.install.root (null) with (/opt/IBM/WebSphere/AppServer/profiles)</message> </record> <record> <date>2012-11-02T04:11:15</date> <millis>1351847475108</millis> <sequence>2986</sequence> <logger>com.ibm.ws.install.configmanager.actionengine.ant.utils.ANTLogToCmtLogAdapter</logger> <level>INFO</level> <class>com.ibm.ws.install.configmanager.actionengine.ant.utils.ANTLogToCmtLogAdapter</class> <method>messageLogged</method> <thread>0</thread> <message>replacing value for was.install.root (/opt/IBM/WebSphere/AppServer) with (/opt/IBM/WebSphere/AppServer)</message> </record> <record> <date>2012-11-02T04:11:15</date> <millis>1351847475108</millis> <sequence>2987</sequence> <logger>com.ibm.ws.install.configmanager.actionengine.ant.utils.ANTLogToCmtLogAdapter</logger> <level>INFO</level> <class>com.ibm.ws.install.configmanager.actionengine.ant.utils.ANTLogToCmtLogAdapter</class> <method>messageLogged</method> <thread>0</thread> <message>replacing value for was.repository.root (null) with (/opt/IBM/WebSphere/AppServer/profiles/config)</message> </record> <record> <date>2012-11-02T04:11:15</date> <millis>1351847475108</millis> <sequence>2988</sequence> <logger>com.ibm.ws.install.configmanager.actionengine.ant.utils.ANTLogToCmtLogAdapter</logger> <level>INFO</level> <class>com.ibm.ws.install.configmanager.actionengine.ant.utils.ANTLogToCmtLogAdapter</class> <method>messageLogged</method> <thread>0</thread> <message>replacing value for com.ibm.ws.scripting.wsadminprops (null) with (/opt/IBM/WebSphere/AppServer/profiles/properties/wsadmin.properties)</message> </record> <record> <date>2012-11-02T04:11:15</date> <millis>1351847475120</millis> <sequence>2989</sequence> <logger>com.ibm.ws.install.configmanager.actionengine.ant.utils.ANTLogToCmtLogAdapter</logger> <level>INFO</level> <class>com.ibm.ws.install.configmanager.actionengine.ant.utils.ANTLogToCmtLogAdapter</class> <method>messageLogged</method> <thread>0</thread> <message>Resetting listener available status to: false</message> </record> <record> <date>2012-11-02T04:11:15</date> <millis>1351847475121</millis> <sequence>2990</sequence> <logger>com.ibm.ws.install.configmanager.actionengine.ant.utils.ANTLogToCmtLogAdapter</logger> <level>INFO</level> <class>com.ibm.ws.install.configmanager.actionengine.ant.utils.ANTLogToCmtLogAdapter</class> <method>messageLogged</method> <thread>0</thread> <message>setting wsadmin requester timeouts</message> </record> <record> <date>2012-11-02T04:11:15</date> <millis>1351847475128</millis> <sequence>2991</sequence> <logger>com.ibm.ws.install.configmanager.actionengine.ant.utils.ANTLogToCmtLogAdapter</logger> <level>INFO</level> <class>com.ibm.ws.install.configmanager.actionengine.ant.utils.ANTLogToCmtLogAdapter</class> <method>messageLogged</method> <thread>0</thread> <message>wsadmin requester retry count = 240000, initialization retry count = 12000, shutdown retry count = 12000</message> </record> <record> <date>2012-11-02T04:11:15</date> <millis>1351847475128</millis> <sequence>2992</sequence> <logger>com.ibm.ws.install.configmanager.actionengine.ant.utils.ANTLogToCmtLogAdapter</logger> <level>INFO</level> <class>com.ibm.ws.install.configmanager.actionengine.ant.utils.ANTLogToCmtLogAdapter</class> <method>messageLogged</method> <thread>0</thread> <message>Checking for wsadmin listener initialization</message> </record>

    Read the article

  • sharepoint 3.0 : access is denied after install

    - by phill
    I just finished install sharepoint 3.0 on a w2k3 enterprise server. It says installation successfully completed. Then when i attempt to go to 'Sharepoint Products and Technologies configuration wizard, i receive the following error: Unhandled exception has occurred in your application. If you click Continue, the application will ignore this error and attempt to continue. If you Quit, the application will close immediately. Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)). See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box. ***** Exception Text ******* System.UnauthorizedAccessException: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)) at Microsoft.SharePoint.SPGlobal.HandleUnauthorizedAccessException(UnauthorizedAccessException ex) at Microsoft.SharePoint.Library.SPRequest.OpenWeb(String bstrUrl, String& pbstrServerRelativeUrl, String& pbstrTitle, String& pbstrDescription, Guid& pguidID, String& pbstrRequestAccessEmail, UInt32& pwebVersion, Guid& pguidScopeId, UInt32& pnAuthorID, UInt32& pnLanguage, UInt32& pnLocale, UInt16& pnTimeZone, Boolean& bTime24, Int16& pnCollation, UInt32& pnCollationLCID, Int16& pnCalendarType, Int16& pnAdjustHijriDays, Int16& pnAltCalendarType, Boolean& pbShowWeeks, Int16& pnFirstWeekOfYear, UInt32& pnFirstDayOfWeek, Int16& pnWorkDays, Int16& pnWorkDayStartHour, Int16& pnWorkDayEndHour, Int16& pnMeetingCount, Int32& plFlags, Boolean& bConnectedToPortal, String& pbstrPortalUrl, String& pbstrPortalName, Int32& plWebTemplateId, Int16& pnProvisionConfig, String& pbstrDefaultTheme, String& pbstrDefaultThemeCSSUrl, String& pbstrAlternateCSSUrl, String& pbstrCustomizedCssFileList, String& pbstrCustomJSUrl, String& pbstrAlternateHeaderUrl, String& pbstrMasterUrl, String& pbstrCustomMasterUrl, String& pbstrSiteLogoUrl, String& pbstrSiteLogoDescription, Object& pvarUser, Boolean& pvarIsAuditor, UInt64& ppermMask, Boolean& bUserIsSiteAdmin, Boolean& bHasUniquePerm, Guid& pguidUserInfoListID, Guid& pguidUniqueNavParent, Int32& plSiteFlags, DateTime& pdtLastContentChange, DateTime& pdtLastSecurityChange, String& pbstrWelcomePage) at Microsoft.SharePoint.SPWeb.InitWeb() at Microsoft.SharePoint.SPWeb.get_WebTemplate() at Microsoft.SharePoint.SPEvaluatorModeProvisioning.TryGetIsSiteProvisioned(String template, String relativePath, Nullable`1 port, SPSite& provisionedSite, SPWeb& provisionedWeb, Uri& provisionedUri) at Microsoft.SharePoint.PostSetupConfiguration.WelcomeForm.ShowNextFormForServerRoleSingleServer() at Microsoft.SharePoint.PostSetupConfiguration.WelcomeForm.PsconfigBaseFormNextButtonClickedEventHandler(Object sender, EventArgs e) at System.Windows.Forms.Control.OnClick(EventArgs e) at System.Windows.Forms.Button.OnClick(EventArgs e) at System.Windows.Forms.Button.WndProc(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) ***** Loaded Assemblies ******* mscorlib Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.3607 (GDR.050727-3600) CodeBase: file:///c:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll ---------------------------------------- psconfigUI Assembly Version: 12.0.0.0 Win32 Version: 12.0.6500.5000 CodeBase: file:///C:/Program%20Files/Common%20Files/Microsoft%20Shared/web%20server%20extensions/12/BIN/psconfigui.exe ---------------------------------------- System.Windows.Forms Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000) CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll ---------------------------------------- System Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.3614 (GDR.050727-3600) CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll ---------------------------------------- System.Drawing Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000) CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll ---------------------------------------- System.Configuration Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000) CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll ---------------------------------------- System.Xml Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.3082 (QFE.050727-3000) CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll ---------------------------------------- Microsoft.SharePoint Assembly Version: 12.0.0.0 Win32 Version: 12.0.6535.5003 CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.SharePoint/12.0.0.0__71e9bce111e9429c/Microsoft.SharePoint.dll ---------------------------------------- Microsoft.SharePoint.SetupConfiguration.Intl Assembly Version: 12.0.0.0 Win32 Version: 12.0.6413.1000 CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.SharePoint.SetupConfiguration.intl/12.0.0.0__71e9bce111e9429c/Microsoft.SharePoint.SetupConfiguration.intl.dll ---------------------------------------- System.ServiceProcess Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000) CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.ServiceProcess/2.0.0.0__b03f5f7f11d50a3a/System.ServiceProcess.dll ---------------------------------------- System.Data Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000) CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Data/2.0.0.0__b77a5c561934e089/System.Data.dll ---------------------------------------- Microsoft.SharePoint.Security Assembly Version: 12.0.0.0 Win32 Version: 12.0.4518.1016 CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.SharePoint.Security/12.0.0.0__71e9bce111e9429c/Microsoft.SharePoint.Security.dll ---------------------------------------- System.Transactions Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000) CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Transactions/2.0.0.0__b77a5c561934e089/System.Transactions.dll ---------------------------------------- Microsoft.SharePoint.Search Assembly Version: 12.0.0.0 Win32 Version: 12.0.6531.5000 CodeBase: file:///C:/WINDOWS/assembly/GAC_32/Microsoft.SharePoint.Search/12.0.0.0__71e9bce111e9429c/Microsoft.SharePoint.Search.dll ---------------------------------------- msvcm80 Assembly Version: 8.0.50727.3053 Win32 Version: 8.00.50727.3053 CodeBase: file:///C:/WINDOWS/WinSxS/x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.3053_x-ww_B80FA8CA/msvcm80.dll ---------------------------------------- System.Web Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.3614 (GDR.050727-3600) CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Web/2.0.0.0__b03f5f7f11d50a3a/System.Web.dll ---------------------------------------- System.DirectoryServices Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000) CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.DirectoryServices/2.0.0.0__b03f5f7f11d50a3a/System.DirectoryServices.dll ---------------------------------------- Microsoft.SharePoint.AdministrationOperation Assembly Version: 12.0.0.0 Win32 Version: 12.0.6500.5000 CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.SharePoint.AdministrationOperation/12.0.0.0__71e9bce111e9429c/Microsoft.SharePoint.AdministrationOperation.dll ---------------------------------------- System.EnterpriseServices Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000) CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.EnterpriseServices/2.0.0.0__b03f5f7f11d50a3a/System.EnterpriseServices.dll ---------------------------------------- Microsoft.SharePoint.Library Assembly Version: 12.0.0.0 Win32 Version: 12.0.6517.5000 CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.SharePoint.Library/12.0.0.0__71e9bce111e9429c/Microsoft.SharePoint.Library.dll ***** JIT Debugging ******* To enable just-in-time (JIT) debugging, the .config file for this application or computer (machine.config) must have the jitDebugging value set in the system.windows.forms section. The application must also be compiled with debugging enabled. For example: When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the computer rather than be handled by this dialog box. Any ideas? thanks in advance

    Read the article

  • WSAECONNRESET (10054) error using WebDrive to map to a Subversion/Apache WebDAV share

    - by Dylan Beattie
    Hello, I'm using WebDrive to map a drive letter to a WebDAV share running on Subversion with the SVNAutoversioning flag enabled. The Subversion server is running CollabNet Subversion Edge with LDAP authentication. When trying to connect using WebDrive, I get: Connecting to site myserver Connecting to http://myserver/webdrive/ Resolving url myserver to an IP address Url resolved to IP address 192.168.0.12 Connecting to 192.168.0.12 on port 80 Connected successfully to the server on port 80 Testing directory listing ... Connecting to 192.168.0.12 on port 80 Connected successfully to the server on port 80 Unable to connect to server, error information below Error: Socket receive failure (4507) Operation: Connecting to server Winsock Error: WSAECONNRESET (10054) The httpd.conf file running on the server contains the following section: <Location /webdrive/> DAV svn SVNParentPath "C:\Program Files\Subversion\data\repositories" SVNReposName "My Subversion WebDrive" AuthzSVNAccessFile "C:\Program Files\Subversion\data/conf/svn_access_file" SVNListParentPath On Allow from all AuthType Basic AuthName "My Subversion Repository" AuthBasicProvider csvn-file-users ldap-users Require valid-user ModMimeUsePathInfo on SVNAutoversioning on </Location> and in the Apache error_yyyy_mm_dd.log file on the server, I'm seeing this when I try to connect via WebDAV: [Mon Jan 10 14:53:22 2011] [debug] mod_authnz_ldap.c(379): [client 192.168.0.50] [5572] auth_ldap authenticate: using URL ldap://mydc/dc=mydomain,dc=com?sAMAccountName?sub [Mon Jan 10 14:53:22 2011] [debug] mod_authnz_ldap.c(484): [client 192.168.0.50] [5572] auth_ldap authenticate: accepting dylan.beattie [Mon Jan 10 14:53:22 2011] [info] [client 192.168.0.50] Access granted: 'dylan.beattie' OPTIONS webdrive:/ [Mon Jan 10 14:53:22 2011] [debug] mod_authnz_ldap.c(379): [client 192.168.0.50] [5572] auth_ldap authenticate: using URL ldap://mydc/dc=mydomain,dc=com?sAMAccountName?sub [Mon Jan 10 14:53:22 2011] [debug] mod_authnz_ldap.c(484): [client 192.168.0.50] [5572] auth_ldap authenticate: accepting dylan.beattie [Mon Jan 10 14:53:22 2011] [info] [client 192.168.0.50] Access granted: 'dylan.beattie' PROPFIND webdrive:/ [Mon Jan 10 14:53:25 2011] [notice] Parent: child process exited with status 3221225477 -- Restarting. [Mon Jan 10 14:53:25 2011] [debug] util_ldap.c(1990): LDAP merging Shared Cache conf: shm=0xcd0f18 rmm=0xcd0f48 for VHOST: myserver.mydomain.com [Mon Jan 10 14:53:25 2011] [debug] util_ldap.c(1990): LDAP merging Shared Cache conf: shm=0xcd0f18 rmm=0xcd0f48 for VHOST: myserver.mydomain.com [Mon Jan 10 14:53:25 2011] [info] APR LDAP: Built with Microsoft Corporation. LDAP SDK [Mon Jan 10 14:53:25 2011] [info] LDAP: SSL support unavailable: LDAP: CA certificates cannot be set using this method, as they are stored in the registry instead. [Mon Jan 10 14:53:25 2011] [notice] Apache/2.2.16 (Win32) DAV/2 SVN/1.6.13 configured -- resuming normal operations [Mon Jan 10 14:53:25 2011] [notice] Server built: Oct 4 2010 19:55:36 [Mon Jan 10 14:53:25 2011] [notice] Parent: Created child process 4368 [Mon Jan 10 14:53:25 2011] [debug] mpm_winnt.c(487): Parent: Sent the scoreboard to the child [Mon Jan 10 14:53:25 2011] [debug] util_ldap.c(1990): LDAP merging Shared Cache conf: shm=0xca2bb0 rmm=0xca2be0 for VHOST: myserver.mydomain.com [Mon Jan 10 14:53:25 2011] [debug] util_ldap.c(1990): LDAP merging Shared Cache conf: shm=0xca2bb0 rmm=0xca2be0 for VHOST: myserver.mydomain.com [Mon Jan 10 14:53:25 2011] [info] APR LDAP: Built with Microsoft Corporation. LDAP SDK [Mon Jan 10 14:53:25 2011] [info] LDAP: SSL support unavailable: LDAP: CA certificates cannot be set using this method, as they are stored in the registry instead. [Mon Jan 10 14:53:25 2011] [error] python_init: Python version mismatch, expected '2.5', found '2.5.4'. [Mon Jan 10 14:53:25 2011] [error] python_init: Python executable found 'C:\\Program Files\\Subversion\\bin\\httpd.exe'. [Mon Jan 10 14:53:25 2011] [error] python_init: Python path being used 'C:\\Program Files\\Subversion\\Python25\\python25.zip;C:\\Program Files\\Subversion\\Python25\\\\DLLs;C:\\Program Files\\Subversion\\Python25\\\\lib;C:\\Program Files\\Subversion\\Python25\\\\lib\\plat-win;C:\\Program Files\\Subversion\\Python25\\\\lib\\lib-tk;C:\\Program Files\\Subversion\\bin'. [Mon Jan 10 14:53:25 2011] [notice] mod_python: Creating 8 session mutexes based on 0 max processes and 64 max threads. [Mon Jan 10 14:53:25 2011] [notice] Child 4368: Child process is running [Mon Jan 10 14:53:25 2011] [debug] mpm_winnt.c(408): Child 4368: Retrieved our scoreboard from the parent. [Mon Jan 10 14:53:25 2011] [info] Parent: Duplicating socket 288 and sending it to child process 4368 [Mon Jan 10 14:53:25 2011] [info] Parent: Duplicating socket 276 and sending it to child process 4368 [Mon Jan 10 14:53:25 2011] [debug] mpm_winnt.c(564): Child 4368: retrieved 2 listeners from parent [Mon Jan 10 14:53:25 2011] [notice] Child 4368: Acquired the start mutex. [Mon Jan 10 14:53:25 2011] [notice] Child 4368: Starting 64 worker threads. [Mon Jan 10 14:53:25 2011] [debug] mpm_winnt.c(605): Parent: Sent 2 listeners to child 4368 [Mon Jan 10 14:53:25 2011] [notice] Child 4368: Starting thread to listen on port 49159. [Mon Jan 10 14:53:25 2011] [notice] Child 4368: Starting thread to listen on port 80. [Mon Jan 10 14:53:25 2011] [debug] mod_authnz_ldap.c(379): [client 192.168.0.50] [4368] auth_ldap authenticate: using URL ldap://mydc/dc=mydomain,dc=com?sAMAccountName?sub [Mon Jan 10 14:53:25 2011] [debug] mod_authnz_ldap.c(484): [client 192.168.0.50] [4368] auth_ldap authenticate: accepting dylan.beattie [Mon Jan 10 14:53:25 2011] [info] [client 192.168.0.50] Access granted: 'dylan.beattie' PROPFIND webdrive:/ [Mon Jan 10 14:53:28 2011] [notice] Parent: child process exited with status 3221225477 -- Restarting. [Mon Jan 10 14:53:28 2011] [debug] util_ldap.c(1990): LDAP merging Shared Cache conf: shm=0xcd4f90 rmm=0xcd4fc0 for VHOST: myserver.mydomain.com [Mon Jan 10 14:53:28 2011] [debug] util_ldap.c(1990): LDAP merging Shared Cache conf: shm=0xcd4f90 rmm=0xcd4fc0 for VHOST: myserver.mydomain.com [Mon Jan 10 14:53:28 2011] [info] APR LDAP: Built with Microsoft Corporation. LDAP SDK [Mon Jan 10 14:53:28 2011] [info] LDAP: SSL support unavailable: LDAP: CA certificates cannot be set using this method, as they are stored in the registry instead. [Mon Jan 10 14:53:28 2011] [notice] Apache/2.2.16 (Win32) DAV/2 SVN/1.6.13 configured -- resuming normal operations [Mon Jan 10 14:53:28 2011] [notice] Server built: Oct 4 2010 19:55:36 [Mon Jan 10 14:53:28 2011] [notice] Parent: Created child process 5440 [Mon Jan 10 14:53:28 2011] [debug] mpm_winnt.c(487): Parent: Sent the scoreboard to the child [Mon Jan 10 14:53:28 2011] [debug] util_ldap.c(1990): LDAP merging Shared Cache conf: shm=0xda2bb0 rmm=0xda2be0 for VHOST: myserver.mydomain.com [Mon Jan 10 14:53:28 2011] [debug] util_ldap.c(1990): LDAP merging Shared Cache conf: shm=0xda2bb0 rmm=0xda2be0 for VHOST: myserver.mydomain.com [Mon Jan 10 14:53:28 2011] [info] APR LDAP: Built with Microsoft Corporation. LDAP SDK [Mon Jan 10 14:53:28 2011] [info] LDAP: SSL support unavailable: LDAP: CA certificates cannot be set using this method, as they are stored in the registry instead. [Mon Jan 10 14:53:28 2011] [error] python_init: Python version mismatch, expected '2.5', found '2.5.4'. [Mon Jan 10 14:53:28 2011] [error] python_init: Python executable found 'C:\\Program Files\\Subversion\\bin\\httpd.exe'. [Mon Jan 10 14:53:28 2011] [error] python_init: Python path being used 'C:\\Program Files\\Subversion\\Python25\\python25.zip;C:\\Program Files\\Subversion\\Python25\\\\DLLs;C:\\Program Files\\Subversion\\Python25\\\\lib;C:\\Program Files\\Subversion\\Python25\\\\lib\\plat-win;C:\\Program Files\\Subversion\\Python25\\\\lib\\lib-tk;C:\\Program Files\\Subversion\\bin'. [Mon Jan 10 14:53:28 2011] [notice] mod_python: Creating 8 session mutexes based on 0 max processes and 64 max threads. [Mon Jan 10 14:53:28 2011] [notice] Child 5440: Child process is running [Mon Jan 10 14:53:28 2011] [debug] mpm_winnt.c(408): Child 5440: Retrieved our scoreboard from the parent. [Mon Jan 10 14:53:28 2011] [info] Parent: Duplicating socket 288 and sending it to child process 5440 [Mon Jan 10 14:53:28 2011] [info] Parent: Duplicating socket 276 and sending it to child process 5440 [Mon Jan 10 14:53:28 2011] [debug] mpm_winnt.c(564): Child 5440: retrieved 2 listeners from parent [Mon Jan 10 14:53:28 2011] [notice] Child 5440: Acquired the start mutex. [Mon Jan 10 14:53:28 2011] [notice] Child 5440: Starting 64 worker threads. [Mon Jan 10 14:53:28 2011] [debug] mpm_winnt.c(605): Parent: Sent 2 listeners to child 5440 [Mon Jan 10 14:53:28 2011] [notice] Child 5440: Starting thread to listen on port 49159. [Mon Jan 10 14:53:28 2011] [notice] Child 5440: Starting thread to listen on port 80. Browsing http://myserver/webdrive/ from a web browser is working fine, and I have a similar set-up working perfectly on a different SVN server that isn't running Collabnet but has had Subversion and Apache installed and configured separately. Any ideas? The python version error might be red herring - I've seen it in a couple of places in the log files and in other scenarios it doesn't appear to be breaking anything...

    Read the article

  • Network Logon Issues with Group Policy and Network

    - by bobloki
    I am gravely in need of your help and assistance. We have a problem with our logon and startup to our Windows 7 Enterprise system. We have more than 3000 Windows Desktops situated in roughly 20+ buildings around campus. Almost every computer on campus has the problem that I will be describing. I have spent over one month peering over etl files from Windows Performance Analyzer (A great product) and hundreds of thousands of event logs. I come to you today humbled that I could not figure this out. The problem as simply put our logon times are extremely long. An average first time logon is roughly 2-10 minutes depending on the software installed. All computers are Windows 7, the oldest computers being 5 years old. Startup times on various computers range from good (1-2 minutes) to very bad (5-60). Our second time logons range from 30 seconds to 4 minutes. We have a gigabit connection between each computer on the network. We have 5 domain controllers which also double as our DNS servers. Initial testing led us to believe that this was a software problem. So I spent a few days testing machines only to find inconsistent results from the etl files from xperfview. Each subset of computers on campus had a different subset of software issues, none seeming to interfere with logon just startup. So I started looking at our group policy and located some very interesting event ID’s. Group Policy 1129: The processing of Group Policy failed because of lack of network connectivity to a domain controller. Group Policy 1055: The processing of Group Policy failed. Windows could not resolve the computer name. This could be caused by one of more of the following: a) Name Resolution failure on the current domain controller. b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller). NETLOGON 5719 : This computer was not able to set up a secure session with a domain controller in domain OURDOMAIN due to the following: There are currently no logon servers available to service the logon request. This may lead to authentication problems. Make sure that this computer is connected to the network. If the problem persists, please contact your domain administrator. E1kexpress 27: Intel®82567LM-3 Gigabit Network Connection – Network link is disconnected. NetBT 4300 – The driver could not be created. WMI 10 - Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected. More or less with timestamps it becomes apparent that the network maybe the issue. 1:25:57 - Group Policy is trying to discover the domain controller information 1:25:57 - The network link has been disconnected 1:25:58 - The processing of Group Policy failed because of lack of network connectivity to a domain controller. This may be a transient condition. A success message would be generated once the machine gets connected to the domain controller and Group Policy has successfully processed. If you do not see a success message for several hours, then contact your administrator. 1:25:58 - Making LDAP calls to connect and bind to active directory. DC1.ourdomain.edu 1:25:58 - Call failed after 0 milliseconds. 1:25:58 - Forcing rediscovery of domain controller details. 1:25:58 - Group policy failed to discover the domain controller in 1030 milliseconds 1:25:58 - Periodic policy processing failed for computer OURDOMAIN\%name%$ in 1 seconds. 1:25:59 - A network link has been established at 1Gbps at full duplex 1:26:00 - The network link has been disconnected 1:26:02 - NtpClient was unable to set a domain peer to use as a time source because of discovery error. NtpClient will try again in 3473457 minutes and DOUBLE THE REATTEMPT INTERVAL thereafter. 1:26:05 - A network link has been established at 1Gbps at full duplex 1:26:08 - Name resolution for the name %Name% timed out after none of the configured DNS servers responded. 1:26:10 – The TCP/IP NetBIOS Helper service entered the running state. 1:26:11 - The time provider NtpClient is currently receiving valid time data at dc4.ourdomain.edu 1:26:14 – User Logon Notification for Customer Experience Improvement Program 1:26:15 - Group Policy received the notification Logon from Winlogon for session 1. 1:26:15 - Making LDAP calls to connect and bind to Active Directory. dc4.ourdomain.edu 1:26:18 - The LDAP call to connect and bind to Active Directory completed. dc4. ourdomain.edu. The call completed in 2309 milliseconds. 1:26:18 - Group Policy successfully discovered the Domain Controller in 2918 milliseconds. 1:26:18 - Computer details: Computer role : 2 Network name : (Blank) 1:26:18 - The LDAP call to connect and bind to Active Directory completed. dc4.ourdomain.edu. The call completed in 2309 milliseconds. 1:26:18 - Group Policy successfully discovered the Domain Controller in 2918 milliseconds. 1:26:19 - The WinHTTP Web Proxy Auto-Discovery Service service entered the running state. 1:26:46 - The Network Connections service entered the running state. 1:27:10 – Retrieved account information 1:27:10 – The system call to get account information completed. 1:27:10 - Starting policy processing due to network state change for computer OURDOMAIN\%name%$ 1:27:10 – Network state change detected 1:27:10 - Making system call to get account information. 1:27:11 - Making LDAP calls to connect and bind to Active Directory. dc4.ourdomain.edu 1:27:13 - Computer details: Computer role : 2 Network name : ourdomain.edu (Now not blank) 1:27:13 - Group Policy successfully discovered the Domain Controller in 2886 milliseconds. 1:27:13 - The LDAP call to connect and bind to Active Directory completed. dc4.ourdomain.edu The call completed in 2371 milliseconds. 1:27:15 - Estimated network bandwidth on one of the connections: 0 kbps. 1:27:15 - Estimated network bandwidth on one of the connections: 8545 kbps. 1:27:15 - A fast link was detected. The Estimated bandwidth is 8545 kbps. The slow link threshold is 500 kbps. 1:27:17 – Powershell - Engine state is changed from Available to Stopped. 1:27:20 - Completed Group Policy Local Users and Groups Extension Processing in 4539 milliseconds. 1:27:25 - Completed Group Policy Scheduled Tasks Extension Processing in 5210 milliseconds. 1:27:27 - Completed Group Policy Registry Extension Processing in 1529 milliseconds. 1:27:27 - Completed policy processing due to network state change for computer OURDOMAIN\%name%$ in 16 seconds. 1:27:27 – The Group Policy settings for the computer were processed successfully. There were no changes detected since the last successful processing of Group Policy. Any help would be appreciated. Please ask for any relevant information and it will be provided as soon as possible.

    Read the article

  • Unable to install rubygems in ubuntu 10.04

    - by loganathan
    I had installed the ruby 1.8.7 with patch level 253 successfully on my ubuntu 10.04, but while installing ruby gems I am facing the below error, can anybody help me on this. ruby -v ruby 1.8.7 (2010-04-19 patchlevel 253) [i686-linux], MBARI 0x8770, Ruby Enterprise Edition 2010.02 gem install mongrel *** longjmp causes uninitialized stack frame ***: /usr/bin/ruby terminated ======= Backtrace: ========= /lib/tls/i686/cmov/libc.so.6(__fortify_fail+0x50)[0x3612d0] /lib/tls/i686/cmov/libc.so.6(+0xe223a)[0x36123a] /usr/bin/ruby[0x80577b9] /usr/bin/ruby[0x80577d5] /usr/bin/ruby(rb_thread_schedule+0x9fc)[0x80652ac] /usr/bin/ruby(rb_thread_kill+0x14)[0x8066c74] /usr/bin/ruby[0x806071d] /usr/bin/ruby[0x80608b9] /usr/bin/ruby[0x806a869] /usr/bin/ruby[0x806a290] /usr/bin/ruby[0x8060601] /usr/bin/ruby[0x80608b9] /usr/bin/ruby[0x806a869] /usr/bin/ruby[0x806995b] /usr/bin/ruby[0x8060601] /usr/bin/ruby[0x80608b9] /usr/bin/ruby[0x806aaa5] /usr/bin/ruby[0x8069d54] /usr/bin/ruby[0x8060601] /usr/bin/ruby[0x80608b9] /usr/bin/ruby[0x805df2d] /usr/bin/ruby[0x8069581] /usr/bin/ruby[0x805de52] /usr/bin/ruby[0x806a0eb] /usr/bin/ruby[0x805e630] /usr/bin/ruby[0x8060601] /usr/bin/ruby[0x80608b9] /usr/bin/ruby[0x806aaa5] /usr/bin/ruby[0x806a715] /usr/bin/ruby[0x8060601] /usr/bin/ruby[0x80608b9] /usr/bin/ruby[0x806a869] /usr/bin/ruby[0x805e48b] /usr/bin/ruby[0x805de52] /usr/bin/ruby[0x8060601] /usr/bin/ruby[0x80608b9] /usr/bin/ruby[0x806aaa5] /usr/bin/ruby[0x805e58a] /usr/bin/ruby[0x805e4aa] /usr/bin/ruby[0x805de52] /usr/bin/ruby[0x8060601] /usr/bin/ruby[0x80608b9] /usr/bin/ruby[0x806a869] /usr/bin/ruby[0x805e48b] /usr/bin/ruby[0x80693f1] /usr/bin/ruby[0x805de52] /usr/bin/ruby[0x806a0eb] /usr/bin/ruby[0x805e630] /usr/bin/ruby[0x805de52] /usr/bin/ruby[0x8060601] /usr/bin/ruby[0x80608b9] /usr/bin/ruby[0x806a869] /usr/bin/ruby[0x805e48b] /usr/bin/ruby[0x805de52] /usr/bin/ruby[0x806a0eb] /usr/bin/ruby[0x805e630] /usr/bin/ruby[0x805de52] /usr/bin/ruby[0x8060601] /usr/bin/ruby[0x80608b9] /usr/bin/ruby[0x806aaa5] /usr/bin/ruby[0x805e48b] /usr/bin/ruby[0x805de52] /usr/bin/ruby[0x8060601] ======= Memory map: ======== 00110000-00112000 r-xp 00000000 08:06 3805677 /usr/lib/ruby/1.8/i686-linux/etc.so 00112000-00113000 r--p 00001000 08:06 3805677 /usr/lib/ruby/1.8/i686-linux/etc.so 00113000-00114000 rw-p 00002000 08:06 3805677 /usr/lib/ruby/1.8/i686-linux/etc.so 00114000-0012e000 r-xp 00000000 08:06 3805682 /usr/lib/ruby/1.8/i686-linux/syck.so 0012e000-0012f000 r--p 00019000 08:06 3805682 /usr/lib/ruby/1.8/i686-linux/syck.so 0012f000-00130000 rw-p 0001a000 08:06 3805682 /usr/lib/ruby/1.8/i686-linux/syck.so 00130000-00131000 r-xp 00000000 08:06 3805666 /usr/lib/ruby/1.8/i686-linux/fcntl.so 00131000-00132000 r--p 00000000 08:06 3805666 /usr/lib/ruby/1.8/i686-linux/fcntl.so 00132000-00133000 rw-p 00001000 08:06 3805666 /usr/lib/ruby/1.8/i686-linux/fcntl.so 00133000-00150000 r-xp 00000000 08:06 11403438 /lib/libgcc_s.so.1 00150000-00151000 r--p 0001c000 08:06 11403438 /lib/libgcc_s.so.1 00151000-00152000 rw-p 0001d000 08:06 11403438 /lib/libgcc_s.so.1 001e2000-00206000 r-xp 00000000 08:06 11403697 /lib/tls/i686/cmov/libm-2.11.1.so 00206000-00207000 r--p 00023000 08:06 11403697 /lib/tls/i686/cmov/libm-2.11.1.so 00207000-00208000 rw-p 00024000 08:06 11403697 /lib/tls/i686/cmov/libm-2.11.1.so 0024d000-00256000 r-xp 00000000 08:06 11403688 /lib/tls/i686/cmov/libcrypt-2.11.1.so 00256000-00257000 r--p 00008000 08:06 11403688 /lib/tls/i686/cmov/libcrypt-2.11.1.so 00257000-00258000 rw-p 00009000 08:06 11403688 /lib/tls/i686/cmov/libcrypt-2.11.1.so 00258000-0027f000 rw-p 00000000 00:00 0 0027f000-003d2000 r-xp 00000000 08:06 11403695 /lib/tls/i686/cmov/libc-2.11.1.so 003d2000-003d4000 r--p 00153000 08:06 11403695 /lib/tls/i686/cmov/libc-2.11.1.so 003d4000-003d5000 rw-p 00155000 08:06 11403695 /lib/tls/i686/cmov/libc-2.11.1.so 003d5000-003d8000 rw-p 00000000 00:00 0 0047e000-00488000 r-xp 00000000 08:06 3805680 /usr/lib/ruby/1.8/i686-linux/socket.so 00488000-00489000 r--p 00009000 08:06 3805680 /usr/lib/ruby/1.8/i686-linux/socket.so 00489000-0048a000 rw-p 0000a000 08:06 3805680 /usr/lib/ruby/1.8/i686-linux/socket.so 004f2000-00507000 r-xp 00000000 08:06 11403690 /lib/tls/i686/cmov/libpthread-2.11.1.so 00507000-00508000 r--p 00014000 08:06 11403690 /lib/tls/i686/cmov/libpthread-2.11.1.so 00508000-00509000 rw-p 00015000 08:06 11403690 /lib/tls/i686/cmov/libpthread-2.11.1.so 00509000-0050b000 rw-p 00000000 00:00 0 00524000-00525000 r-xp 00000000 00:00 0 [vdso] 00544000-00557000 r-xp 00000000 08:06 11403553 /lib/libz.so.1.2.3.3 00557000-00558000 r--p 00012000 08:06 11403553 /lib/libz.so.1.2.3.3 00558000-00559000 rw-p 00013000 08:06 11403553 /lib/libz.so.1.2.3.3 00639000-0063c000 r-xp 00000000 08:06 3805679 /usr/lib/ruby/1.8/i686-linux/thread.so 0063c000-0063d000 r--p 00002000 08:06 3805679 /usr/lib/ruby/1.8/i686-linux/thread.so 0063d000-0063e000 rw-p 00003000 08:06 3805679 /usr/lib/ruby/1.8/i686-linux/thread.so 00649000-0064d000 r-xp 00000000 08:06 11403714 /lib/tls/i686/cmov/libnss_dns-2.11.1.so 0064d000-0064e000 r--p 00004000 08:06 11403714 /lib/tls/i686/cmov/libnss_dns-2.11.1.so 0064e000-0064f000 rw-p 00005000 08:06 11403714 /lib/tls/i686/cmov/libnss_dns-2.11.1.so 00663000-006a3000 r-xp 00000000 08:06 4329500 /usr/lib/ruby/site_ruby/1.8/i686-linux/openssl.so 006a3000-006a4000 r--p 0003f000 08:06 4329500 /usr/lib/ruby/site_ruby/1.8/i686-linux/openssl.so 006a4000-006a5000 rw-p 00040000 08:06 4329500 /usr/lib/ruby/site_ruby/1.8/i686-linux/openssl.so 006a5000-006a6000 rw-p 00000000 00:00 0 0070d000-0070f000 r-xp 00000000 08:06 11403689 /lib/tls/i686/cmov/libdl-2.11.1.so 0070f000-00710000 r--p 00001000 08:06 11403689 /lib/tls/i686/cmov/libdl-2.11.1.so 00710000-00711000 rw-p 00002000 08:06 11403689 /lib/tls/i686/cmov/libdl-2.11.1.so 00711000-0084b000 r-xp 00000000 08:06 11403909 /lib/libcrypto.so.0.9.8 0084b000-00853000 r--p 00139000 08:06 11403909 /lib/libcrypto.so.0.9.8 00853000-00861000 rw-p 00141000 08:06 11403909 /lib/libcrypto.so.0.9.8 00861000-00864000 rw-p 00000000 00:00 0 00864000-00865000 ---p 00000000 00:00 0 00865000-00966000 rwxp 00000000 00:00 0 00977000-00979000 r-xp 00000000 08:06 11403476 /lib/libnss_mdns4_minimal.so.2 00979000-0097a000 r--p 00001000 08:06 11403476 /lib/libnss_mdns4_minimal.so.2 0097a000-0097b000 rw-p 00002000 08:06 11403476 /lib/libnss_mdns4_minimal.so.2 009fa000-00a04000 r-xp 00000000 08:06 11403691 /lib/tls/i686/cmov/libnss_files-2.11.1.so 00a04000-00a05000 r--p 00009000 08:06 11403691 /lib/tls/i686/cmov/libnss_files-2.11.1.so 00a05000-00a06000 rw-p 0000a000 08:06 11403691 /lib/tls/i686/cmov/libnss_files-2.11.1.so 00ac0000-00ac4000 r-xp 00000000 08:06 3805670 /usr/lib/ruby/1.8/i686-linux/stringio.so 00ac4000-00ac5000 r--p 00003000 08:06 3805670 /usr/lib/ruby/1.8/i686-linux/stringio.so 00ac5000-00ac6000 rw-p 00004000 08:06 3805670 /usr/lib/ruby/1.8/i686-linux/stringio.so 00af3000-00b0e000 r-xp 00000000 08:06 11403607 /lib/ld-2.11.1.so 00b0e000-00b0f000 r--p 0001a000 08:06 11403607 /lib/ld-2.11.1.so 00b0f000-00b10000 rw-p 0001b000 08:06 11403607 /lib/ld-2.11.1.so 00c35000-00c45000 r-xp 00000000 08:06 11403692 /lib/tls/i686/cmov/libresolv-2.11.1.so 00c45000-00c46000 r--p 00010000 08:06 11403692 /lib/tls/i686/cmov/libresolv-2.11.1.so 00c46000-00c47000 rw-p 00011000 08:06 11403692 /lib/tls/i686/cmov/libresolv-2.11.1.so 00c47000-00c49000 rw-p 00000000 00:00 0 00d51000-00d59000 r-xp 00000000 08:06 4329502 /usr/lib/ruby/site_ruby/1.8/i686-linux/zlib.so 00d59000-00d5a000 r--p 00007000 08:06 4329502 /usr/lib/ruby/site_ruby/1.8/i686-linux/zlib.so 00d5a000-00d5b000 rw-p 00008000 08:06 4329502 /usr/lib/ruby/site_ruby/1.8/i686-linux/zlib.so 00d60000-00d61000 r-xp 00000000 08:06 3805664 /usr/lib/ruby/1.8/i686-linux/rational.so 00d61000-00d62000 r--p 00000000 08:06 3805664 /usr/lib/ruby/1.8/i686-linux/rational.so 00d62000-00d63000 rw-p 00001000 08:06 3805664 /usr/lib/ruby/1.8/i686-linux/rational.so 00de6000-00de9000 r-xp 00000000 08:06 3805691 /usr/lib/ruby/1.8/i686-linux/digest.so 00de9000-00dea000 r--p 00002000 08:06 3805691 /usr/lib/ruby/1.8/i686-linux/digest.so 00dea000-00deb000 rw-p 00003000 08:06 3805691 /usr/lib/ruby/1.8/i686-linux/digest.so 00e63000-00e6a000 r-xp 00000000 08:06 11403700 /lib/tls/i686/cmov/librt-2.11.1.so 00e6a000-00e6b000 r--p 00006000 08:06 11403700 /lib/tls/i686/cmov/librt-2.11.1.so 00e6b000-00e6c000 rw-p 00007000 08:06 11403700 /lib/tls/i686/cmov/librt-2.11.1.so 00f70000-00fb4000 r-xp 00000000 08:06 11403907 /lib/libssl.so.0.9.8Aborted

    Read the article

  • Installing Oracle 11gR2 on RHEL 6.2

    - by Chris
    Hello all I'm having some difficulty installing Oracle 11gR2 on RHEL 6.2 I have compiled a giant list of every single step I have taken so far I installed RHEL 6.2 on VMWARE it did it's easy install automatically I Selected 4gb of memory Selected max size of 80Gb Selected 2 processors Sorry for the bad styling copy paste isn't working correctly The version of oracle i downloaded is Linux x86-64 11.2.0.1 I am installing this on a local machine NOT a remote machine I followed the following documentation http://docs.oracle.com/cd/E11882_01/install.112/e24326/toc.htm I bolded the steps which I was least sure about from my research Easy installed with RHEL 6.2 for VMWARE Registered with red hat so I can get updates Reinstalled vmware-tools by pressing enter at every choice Sudo yum update at the end something about GPG key selected y then y Checked Memory Requirements grep MemTotal /proc/meminfo MemTotal: 3921368 kb uname -m x86_64 grep SwapTotal /proc/meminfo SwapTotal: 6160376 kb free total used free shared buffers cached Mem: 3921368 2032012 1889356 0 76216 1533268 -/+ buffers/cache: 422528 3498840 Swap: 6160376 0 6160376 df -h /dev/shm Filesystem Size Used Avail Use% Mounted on tmpfs 1.9G 276K 1.9G 1% /dev/shm df -h /tmp Filesystem Size Used Avail Use% Mounted on /dev/sda2 73G 2.7G 67G 4% / df -h Filesystem Size Used Avail Use% Mounted on /dev/sda2 73G 2.7G 67G 4% / tmpfs 1.9G 276K 1.9G 1% /dev/shm /dev/sda1 291M 58M 219M 21% /boot All looked fine to me except maybe for swap? Software Requirements cat /proc/version Linux version 2.6.32-220.el6.x86_64 ([email protected]) (gcc version 4.4.5 20110214 (Red Hat 4.4.5-6) (GCC) ) #1 SMP Wed Nov 9 08:03:13 EST 2011 uname -r 2.6.32-220.el6.x86_64 (same as above but whatever) According to the tutorial should be On Red Hat Enterprise Linux 6 2.6.32-71.el6.x86_64 or later These are the versions of software I have installed binutils-2.20.51.0.2-5.28.el6.x86_64 compat-libcap1-1.10-1.x86_64 compat-libstdc++-33-3.2.3-69.el6.x86_64 compat-libstdc++-33.i686 0:3.2.3-69.el6 gcc-4.4.6-3.el6.x86_64 gcc-c++.x86_64 0:4.4.6-3.el6 glibc-2.12-1.47.el6_2.12.x86_64 glibc-2.12-1.47.el6_2.12.i686 glibc-devel-2.12-1.47.el6_2.12.x86_64 glibc-devel.i686 0:2.12-1.47.el6_2.12 ksh.x86_64 0:20100621-12.el6_2.1 libgcc-4.4.6-3.el6.x86_64 libgcc-4.4.6-3.el6.i686 libstdc++-4.4.6-3.el6.x86_64 libstdc++.i686 0:4.4.6-3.el6 libstdc++-devel.i686 0:4.4.6-3.el6 libstdc++-devel-4.4.6-3.el6.x86_64 libaio-0.3.107-10.el6.x86_64 libaio-0.3.107-10.el6.i686 libaio-devel-0.3.107-10.el6.x86_64 libaio-devel-0.3.107-10.el6.i686 make-3.81-19.el6.x86_64 sysstat-9.0.4-18.el6.x86_64 unixODBC-2.2.14-11.el6.x86_64 unixODBC-devel-2.2.14-11.el6.x86_64 unixODBC-devel-2.2.14-11.el6.i686 unixODBC-2.2.14-11.el6.i686 8. Probably screwed up here or step 9 /usr/sbin/groupadd oinstall /usr/sbin/groupadd dba(not sure why this isn't in the tutorial) /usr/sbin/useradd -g oinstall -G dba oracle passwd oracle /sbin/sysctl -a | grep sem Xkernel.sem = 250 32000 32 128 /sbin/sysctl -a | grep shm kernel.shmmax = 68719476736 kernel.shmall = 4294967296 kernel.shmmni = 4096 vm.hugetlb_shm_group = 0 /sbin/sysctl -a | grep file-max Xfs.file-max = 384629 /sbin/sysctl -a | grep ip_local_port_range Xnet.ipv4.ip_local_port_range = 32768 61000 /sbin/sysctl -a | grep rmem_default Xnet.core.rmem_default = 124928 /sbin/sysctl -a | grep rmem_max Xnet.core.rmem_max = 131071 /sbin/sysctl -a | grep wmem_max Xnet.core.wmem_max = 131071 /sbin/sysctl -a | grep wmem_default Xnet.core.wmem_default = 124928 Here is my sysctl.conf file I only added the items that were bigger: Kernel sysctl configuration file for Red Hat Linux # For binary values, 0 is disabled, 1 is enabled. See sysctl(8) and sysctl.conf(5) for more details. Controls IP packet forwarding net.ipv4.ip_forward = 0 Controls source route verification net.ipv4.conf.default.rp_filter = 1 Do not accept source routing net.ipv4.conf.default.accept_source_route = 0 Controls the System Request debugging functionality of the kernel kernel.sysrq = 0 Controls whether core dumps will append the PID to the core filename. Useful for debugging multi-threaded applications. kernel.core_uses_pid = 1 Controls the use of TCP syncookies net.ipv4.tcp_syncookies = 1 Disable netfilter on bridges. net.bridge.bridge-nf-call-ip6tables = 0 net.bridge.bridge-nf-call-iptables = 0 net.bridge.bridge-nf-call-arptables = 0 Controls the maximum size of a message, in bytes kernel.msgmnb = 65536 Controls the default maxmimum size of a mesage queue kernel.msgmax = 65536 Controls the maximum shared segment size, in bytes kernel.shmmax = 68719476736 Controls the maximum number of shared memory segments, in pages kernel.shmall = 4294967296 fs.aio-max-nr = 1048576 fs.file-max = 6815744 kernel.sem = 250 32000 100 128 net.ipv4.ip_local_port_range = 9000 65500 net.core.rmem_default = 262144 net.core.rmem_max = 4194304 net.core.wmem_default = 262144 net.core.wmem_max = 1048576 /sbin/sysctl -p net.ipv4.ip_forward = 0 net.ipv4.conf.default.rp_filter = 1 net.ipv4.conf.default.accept_source_route = 0 kernel.sysrq = 0 kernel.core_uses_pid = 1 net.ipv4.tcp_syncookies = 1 error: "net.bridge.bridge-nf-call-ip6tables" is an unknown key error: "net.bridge.bridge-nf-call-iptables" is an unknown key error: "net.bridge.bridge-nf-call-arptables" is an unknown key kernel.msgmnb = 65536 kernel.msgmax = 65536 kernel.shmmax = 68719476736 kernel.shmall = 4294967296 fs.aio-max-nr = 1048576 fs.file-max = 6815744 kernel.sem = 250 32000 100 128 net.ipv4.ip_local_port_range = 9000 65500 net.core.rmem_default = 262144 net.core.rmem_max = 4194304 net.core.wmem_default = 262144 net.core.wmem_max = 1048576 su - oracle ulimit -Sn 1024 ulimit -Hn 1024 ulimit -Su 1024 ulimit -Hu 30482 ulimit -Su 1024 ulimit -Ss 10240 ulimit -Hs unlimited su - nano /etc/security/limits.conf *added to the end of the file * oracle soft nproc 2047 oracle hard nproc 16384 oracle soft nofile 1024 oracle hard nofile 65536 oracle soft stack 10240 exit exit su - mkdir -p /app/ chown -R oracle:oinstall /app/ chmod -R 775 /app/ 9. THIS IS PROBABLY WHERE I MESSED UP I then exited out of the root account so now I'm back in my account chris then I su - oracle echo $SHELL /bin/bash umask 0022 (so it should be set already to what is neccesary) Also from what I have read I do not need to set the DISPLAY variable because I'm installing this on the localhost I then opened the .bash_profile of the oracle and changed it to the following .bash_profile Get the aliases and functions if [ -f ~/.bashrc ]; then . ~/.bashrc fi User specific environment and startup programs PATH=$PATH:$HOME/bin; export PATH ORACLE_BASE=/app/oracle ORACLE_SID=orcl export ORACLE_BASE ORACLE_SID I then shutdown the virtual machine shared my desktop folder from my windows 7 then turned back on the virtual machine logged in as chris opened up a terminal then: su - for some reason the shared folder didn't appear so I reinstalled vmware tools again and restarted then same as before su - cp -R linux_oracle/database /db; chown -R oracle:oinstall /db; chmod -R 775 /db; ll /db drwxrwxr-x. 8 oracle oinstall 4096 Jun 5 06:20 database exit su - oracle cd /db/database ./runInstaller AND FINALLY THE INFAMOUS JAVA:132 ERROR MESSAGE Starting Oracle Universal Installer... Checking Temp space: must be greater than 80 MB. Actual 65646 MB Passed Checking swap space: must be greater than 150 MB. Actual 6015 MB Passed Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-06-05_06-47-12AM. Please wait ...[oracle@localhost database]$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2012-06-05_06-47-12AM/jdk/jre/lib/i386/xawt/libmawt.so: libXext.so.6: cannot open shared object file: No such file or directory at java.lang.ClassLoader$NativeLibrary.load(Native Method) at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1751) at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1647) at java.lang.Runtime.load0(Runtime.java:769) at java.lang.System.load(System.java:968) at java.lang.ClassLoader$NativeLibrary.load(Native Method) at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1751) at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1668) at java.lang.Runtime.loadLibrary0(Runtime.java:822) at java.lang.System.loadLibrary(System.java:993) at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:50) at java.security.AccessController.doPrivileged(Native Method) at java.awt.Toolkit.loadLibraries(Toolkit.java:1509) at java.awt.Toolkit.(Toolkit.java:1530) at com.jgoodies.looks.LookUtils.isLowResolution(Unknown Source) at com.jgoodies.looks.LookUtils.(Unknown Source) at com.jgoodies.looks.plastic.PlasticLookAndFeel.(PlasticLookAndFeel.java:122) at java.lang.Class.forName0(Native Method) at java.lang.Class.forName(Class.java:242) at javax.swing.SwingUtilities.loadSystemClass(SwingUtilities.java:1783) at javax.swing.UIManager.setLookAndFeel(UIManager.java:480) at oracle.install.commons.util.Application.startup(Application.java:758) at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:164) at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:181) at oracle.install.commons.base.driver.common.Installer.startup(Installer.java:265) at oracle.install.ivw.db.driver.DBInstaller.startup(DBInstaller.java:114) at oracle.install.ivw.db.driver.DBInstaller.main(DBInstaller.java:132)

    Read the article

  • AD-Integrated DNS failure: "Access was Denied"

    - by goldPseudo
    I have a single Windows 2008 R2 server configured as a domain controller with Active Directory Domain Services and DNS Server. The DNS Server was recently uninstalled and reinstalled in an attempt to fix a (possibly unrelated) problem; the event log was previously flooded with errors (#4000, "The DNS Server was unable to open Active Directory...") which reinstalling did not fix. However, while before it was at least showing and resolving names from the local network (slowly), now it's showing nothing at all. (The original error started with a #4015 error "The DNS server has encountered a critical error from the Active Directory," followed by a long string of #4000 and a few #4004. This may have been caused when a new DNS name was recently added, but I can't be sure of the timing.) Attempting to manage the DNS through Administrative Tools > DNS brings up an error: The server SERVERNAME could not be contacted. The error was: Access was denied. Would you like to add it anyway? Selecting yes just puts a SERVERNAME item on the list, but with all the configuration options grayed out. I attempted editing my hosts file as per this post but to no avail. Running dcdiag, it does identify the home server properly, but fails right away testing connectivity with: Starting test: Connectivity The host blahblahblahyaddayaddayadda could not be resolved to an IP address. Check the DNS server, DHCP, server name, etc. Got error while checking LDAP and RPC connectivity. Please check your firewall settings. ......................... SERVERNAME failed test Connectivity Adding the blahblahblahyaddayaddayadda address to hosts (pointing at 127.0.0.1), the connectivity test succeeded but it didn't seem to solve the fundamental problem (Access was denied) so I hashed it out again. Primary DNS server is properly pointing at 127.0.0.1 according to ipconfig /all. And the DNS server is forwarding requests to external addresses properly (if slowly), but the resolving of local network names is borked. The DNS database itself is small enough that I am (grudgingly) able to rebuild it if need be, but the DNS Server doesn't seem willing to let me work with (or around) it at all. (and yes before you ask there are no system backups available) Where do I go from here? As requested, my (slightly obfuscated) dcdiag output: Directory Server Diagnosis Performing initial setup: Trying to find home server... Home Server = bulgogi * Identified AD Forest. Done gathering initial info. Doing initial required tests Testing server: Obfuscated\BULGOGI Starting test: Connectivity The host a-whole-lot-of-numbers._msdcs.obfuscated.address could not be resolved to an IP address. Check the DNS server, DHCP, server name, etc. Got error while checking LDAP and RPC connectivity. Please check your firewall settings. ......................... BULGOGI failed test Connectivity Doing primary tests Testing server: Obfuscated\BULGOGI Skipping all tests, because server BULGOGI is not responding to directory service requests. Running partition tests on : ForestDnsZones Starting test: CheckSDRefDom ......................... ForestDnsZones passed test CheckSDRefDom Starting test: CrossRefValidation ......................... ForestDnsZones passed test CrossRefValidation Running partition tests on : DomainDnsZones Starting test: CheckSDRefDom ......................... DomainDnsZones passed test CheckSDRefDom Starting test: CrossRefValidation ......................... DomainDnsZones passed test CrossRefValidation Running partition tests on : Schema Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Running partition tests on : Configuration Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Running partition tests on : obfuscated Starting test: CheckSDRefDom ......................... obfuscated passed test CheckSDRefDom Starting test: CrossRefValidation ......................... obfuscated passed test CrossRefValidation Running enterprise tests on : obfuscated.address Starting test: LocatorCheck ......................... obfuscated.address passed test LocatorCheck Starting test: Intersite ......................... obfuscated.address passed test Intersite And my hosts file (minus the hashed lines for brevity): 127.0.0.1 localhost ::1 localhost And, for the sake of completion, here's selected chunks of my netstat -a -n output: TCP 0.0.0.0:88 0.0.0.0:0 LISTENING TCP 0.0.0.0:135 0.0.0.0:0 LISTENING TCP 0.0.0.0:389 0.0.0.0:0 LISTENING TCP 0.0.0.0:445 0.0.0.0:0 LISTENING TCP 0.0.0.0:464 0.0.0.0:0 LISTENING TCP 0.0.0.0:593 0.0.0.0:0 LISTENING TCP 0.0.0.0:636 0.0.0.0:0 LISTENING TCP 0.0.0.0:3268 0.0.0.0:0 LISTENING TCP 0.0.0.0:3269 0.0.0.0:0 LISTENING TCP 0.0.0.0:3389 0.0.0.0:0 LISTENING TCP 0.0.0.0:9389 0.0.0.0:0 LISTENING TCP 0.0.0.0:47001 0.0.0.0:0 LISTENING TCP 0.0.0.0:49152 0.0.0.0:0 LISTENING TCP 0.0.0.0:49153 0.0.0.0:0 LISTENING TCP 0.0.0.0:49154 0.0.0.0:0 LISTENING TCP 0.0.0.0:49155 0.0.0.0:0 LISTENING TCP 0.0.0.0:49157 0.0.0.0:0 LISTENING TCP 0.0.0.0:49158 0.0.0.0:0 LISTENING TCP 0.0.0.0:49164 0.0.0.0:0 LISTENING TCP 0.0.0.0:49178 0.0.0.0:0 LISTENING TCP 0.0.0.0:49179 0.0.0.0:0 LISTENING TCP 0.0.0.0:50480 0.0.0.0:0 LISTENING TCP 127.0.0.1:53 0.0.0.0:0 LISTENING TCP 192.168.12.127:53 0.0.0.0:0 LISTENING TCP 192.168.12.127:139 0.0.0.0:0 LISTENING TCP 192.168.12.127:445 192.168.12.50:51118 ESTABLISHED TCP 192.168.12.127:3389 192.168.12.4:33579 ESTABLISHED TCP 192.168.12.127:3389 192.168.12.100:1115 ESTABLISHED TCP 192.168.12.127:50784 192.168.12.50:49174 ESTABLISHED <snip ipv6> UDP 0.0.0.0:123 *:* UDP 0.0.0.0:500 *:* UDP 0.0.0.0:1645 *:* UDP 0.0.0.0:1645 *:* UDP 0.0.0.0:1646 *:* UDP 0.0.0.0:1646 *:* UDP 0.0.0.0:1812 *:* UDP 0.0.0.0:1812 *:* UDP 0.0.0.0:1813 *:* UDP 0.0.0.0:1813 *:* UDP 0.0.0.0:4500 *:* UDP 0.0.0.0:5355 *:* UDP 0.0.0.0:59638 *:* <snip a few thousand lines> UDP 0.0.0.0:62140 *:* UDP 127.0.0.1:53 *:* UDP 127.0.0.1:49540 *:* UDP 127.0.0.1:49541 *:* UDP 127.0.0.1:53655 *:* UDP 127.0.0.1:54946 *:* UDP 127.0.0.1:58345 *:* UDP 127.0.0.1:63352 *:* UDP 127.0.0.1:63728 *:* UDP 127.0.0.1:63729 *:* UDP 127.0.0.1:64215 *:* UDP 127.0.0.1:64646 *:* UDP 192.168.12.127:53 *:* UDP 192.168.12.127:67 *:* UDP 192.168.12.127:68 *:* UDP 192.168.12.127:88 *:* UDP 192.168.12.127:137 *:* UDP 192.168.12.127:138 *:* UDP 192.168.12.127:389 *:* UDP 192.168.12.127:464 *:* UDP 192.168.12.127:2535 *:* <snip ipv6 again>

    Read the article

  • IRQ problem with 2.6.32/2.6.39 kernel on Debian Squeeze x86_64

    - by MasterM
    I recently assembled a new computer so that all hardware is pretty new. Since then I've been experiencing some problem with IRQs when running Debian 6.0. On random occasions, usually after an hour or so of running I hear a beep and this shows up in dmesg: [ 3537.762795] irq 16: nobody cared (try booting with the "irqpoll" option) [ 3537.762797] Pid: 0, comm: swapper Tainted: P W O 2.6.39-2-amd64 #1 [ 3537.762798] Call Trace: [ 3537.762799] <IRQ> [<ffffffff810924d4>] ? __report_bad_irq+0x3a/0xa2 [ 3537.762803] [<ffffffff810926a4>] ? note_interrupt+0x168/0x1da [ 3537.762805] [<ffffffff81090dd4>] ? handle_irq_event_percpu+0x171/0x18f [ 3537.762807] [<ffffffff8100e0e2>] ? read_tsc+0x5/0x16 [ 3537.762809] [<ffffffff8106b8a2>] ? update_ts_time_stats+0x32/0x6b [ 3537.762810] [<ffffffff81090e26>] ? handle_irq_event+0x34/0x52 [ 3537.762812] [<ffffffff81063fb7>] ? sched_clock_idle_wakeup_event+0x12/0x1c [ 3537.762813] [<ffffffff81092df2>] ? handle_fasteoi_irq+0x82/0xa4 [ 3537.762815] [<ffffffff8100aadb>] ? handle_irq+0x1a/0x23 [ 3537.762816] [<ffffffff8100a384>] ? do_IRQ+0x45/0xaa [ 3537.762818] [<ffffffff81332c93>] ? common_interrupt+0x13/0x13 [ 3537.762818] <EOI> [<ffffffff81332c8e>] ? common_interrupt+0xe/0x13 [ 3537.762821] [<ffffffff81026800>] ? native_safe_halt+0x2/0x3 [ 3537.762829] [<ffffffffa016ed58>] ? acpi_idle_do_entry+0x39/0x62 [processor] [ 3537.762831] [<ffffffffa016edde>] ? acpi_idle_enter_c1+0x5d/0xad [processor] [ 3537.762834] [<ffffffff81261033>] ? cpuidle_idle_call+0x11f/0x1cc [ 3537.762835] [<ffffffff81008dd2>] ? cpu_idle+0xab/0xe1 [ 3537.762837] [<ffffffff8169fc60>] ? start_kernel+0x3e0/0x3eb [ 3537.762838] [<ffffffff8169f3c8>] ? x86_64_start_kernel+0x102/0x10f [ 3537.762839] handlers: [ 3537.762840] [<ffffffffa0358d5a>] (rtl8169_interrupt+0x0/0x2d7 [r8169]) [ 3537.762842] [<ffffffffa08ff2ca>] (nv_kern_isr+0x0/0x54 [nvidia]) [ 3537.762902] Disabling IRQ #16 After that Xorg either hogs on CPU or is unstable (up to hanging the system completely). When I restart Xorg everything is fine again and the problem doesn't occur until next reboot. I tried to upgrade the kernel from stock 2.6.32 to 2.6.39 from unstable repository but that didn't help. Booting with irqpoll option only seems to prolong the initial time period after which the problem occurs. I'm using latest NVIDIA drivers and Realtek firmware from firmware-realtek package. I have two GTX 560Ti that run in SLI. Disabling SLI or taking out one card completely doesn't solve the problem either. Output of uname -a is: Linux whitestar 2.6.39-2-amd64 #1 SMP Wed Jun 8 11:01:04 UTC 2011 x86_64 GNU/Linux Output of lspci is: 00:00.0 Host bridge: Intel Corporation Sandy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Sandy Bridge PCI Express Root Port (rev 09) 00:01.1 PCI bridge: Intel Corporation Sandy Bridge PCI Express Root Port (rev 09) 00:16.0 Communication controller: Intel Corporation Cougar Point HECI Controller #1 (rev 04) 00:19.0 Ethernet controller: Intel Corporation 82579V Gigabit Network Connection (rev 05) 00:1a.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation Cougar Point High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 2 (rev b5) 00:1c.2 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 3 (rev b5) 00:1c.4 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 5 (rev b5) 00:1c.6 PCI bridge: Intel Corporation 82801 PCI Bridge (rev b5) 00:1d.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation Cougar Point LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation Cougar Point 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation Cougar Point SMBus Controller (rev 05) 01:00.0 VGA compatible controller: nVidia Corporation Device 1200 (rev a1) 01:00.1 Audio device: nVidia Corporation Device 0e0c (rev a1) 02:00.0 VGA compatible controller: nVidia Corporation Device 1200 (rev a1) 02:00.1 Audio device: nVidia Corporation Device 0e0c (rev a1) 04:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) 06:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) 07:00.0 PCI bridge: Device 1b21:1080 (rev 01) 08:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10) 08:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0) Contents of /proc/interrupts: CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7 0: 77 0 0 0 0 0 0 0 IO-APIC-edge timer 1: 2 0 0 0 0 0 0 0 IO-APIC-edge i8042 8: 1 0 0 0 0 0 0 0 IO-APIC-edge rtc0 9: 0 0 0 0 0 0 0 0 IO-APIC-fasteoi acpi 12: 4 0 0 0 0 0 0 0 IO-APIC-edge i8042 16: 699083 0 0 0 0 0 0 0 IO-APIC-fasteoi nvidia, eth0 17: 87810 0 0 0 0 0 0 0 IO-APIC-fasteoi firewire_ohci, hda_intel, nvidia 18: 242 0 0 0 0 0 0 0 IO-APIC-fasteoi hda_intel 23: 85925 0 0 0 0 0 0 0 IO-APIC-fasteoi ehci_hcd:usb5, ehci_hcd:usb6 40: 0 0 0 0 0 0 0 0 PCI-MSI-edge PCIe PME 41: 0 0 0 0 0 0 0 0 PCI-MSI-edge PCIe PME 42: 0 0 0 0 0 0 0 0 PCI-MSI-edge PCIe PME 43: 0 0 0 0 0 0 0 0 PCI-MSI-edge PCIe PME 44: 0 0 0 0 0 0 0 0 PCI-MSI-edge PCIe PME 45: 0 0 0 0 0 0 0 0 PCI-MSI-edge PCIe PME 46: 79853 0 0 0 0 0 0 0 PCI-MSI-edge ahci 48: 1 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 49: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 50: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 51: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 52: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 53: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 54: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 55: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 56: 1 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 57: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 58: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 59: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 60: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 61: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 62: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 63: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 64: 173506 0 0 0 0 0 0 0 PCI-MSI-edge hda_intel NMI: 482 89 25 13 277 24 11 10 Non-maskable interrupts LOC: 783857 194752 114133 70577 372438 179065 117179 162016 Local timer interrupts SPU: 0 0 0 0 0 0 0 0 Spurious interrupts PMI: 482 89 25 13 277 24 11 10 Performance monitoring interrupts IWI: 0 0 0 0 0 0 0 0 IRQ work interrupts RES: 131917 46750 7432 3291 150003 9576 3435 3067 Rescheduling interrupts CAL: 2759 6563 7150 6997 5387 7140 7269 6678 Function call interrupts TLB: 4396 2038 1336 492 5434 1896 1121 606 TLB shootdowns TRM: 0 0 0 0 0 0 0 0 Thermal event interrupts THR: 0 0 0 0 0 0 0 0 Threshold APIC interrupts MCE: 0 0 0 0 0 0 0 0 Machine check exceptions MCP: 37 37 37 37 37 37 37 37 Machine check polls ERR: 0 MIS: 0 Last but not least, right after boot-up those lines are usually present in dmesg: [ 18.367094] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. [ 18.458859] hda-intel: IRQ timing workaround is activated for card #2. Suggest a bigger bdl_pos_adj. I'm not sure if it's related or a symptom of a bigger problem so I'm posting it just in case. I don't really know what other information might be of relevance here. Don't hesitate to ask for more in the comments.

    Read the article

  • PPTP ping client to client error

    - by Linux Intel
    I installed pptp server on a centos 6 64bit server PPTP Server ip : 55.66.77.10 PPTP Local ip : 10.0.0.1 Client1 IP : 10.0.0.60 centos 5 64bit Client2 IP : 10.0.0.61 centos5 64bit PPTP Server can ping Client1 And client 1 can ping PPTP Server PPTP Server can ping Client2 And client 2 can ping PPTP Server The problem is client 1 can not ping Client 2 route -n on PPTP Server Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.0.60 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 10.0.0.61 0.0.0.0 255.255.255.255 UH 0 0 0 ppp1 55.66.77.10 0.0.0.0 255.255.255.248 U 0 0 0 eth0 10.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 eth0 0.0.0.0 55.66.77.19 0.0.0.0 UG 0 0 0 eth0 route -n On Client 1 Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 55.66.77.10 70.14.13.19 255.255.255.255 UGH 0 0 0 eth0 10.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 eth1 0.0.0.0 70.14.13.19 0.0.0.0 UG 0 0 0 eth0 route -n On Client 2 Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 55.66.77.10 84.56.120.60 255.255.255.255 UGH 0 0 0 eth1 10.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 eth0 0.0.0.0 84.56.120.60 0.0.0.0 UG 0 0 0 eth1 cat /etc/ppp/options.pptpd on PPTP server ############################################################################### # $Id: options.pptpd,v 1.11 2005/12/29 01:21:09 quozl Exp $ # # Sample Poptop PPP options file /etc/ppp/options.pptpd # Options used by PPP when a connection arrives from a client. # This file is pointed to by /etc/pptpd.conf option keyword. # Changes are effective on the next connection. See "man pppd". # # You are expected to change this file to suit your system. As # packaged, it requires PPP 2.4.2 and the kernel MPPE module. ############################################################################### # Authentication # Name of the local system for authentication purposes # (must match the second field in /etc/ppp/chap-secrets entries) name pptpd # Strip the domain prefix from the username before authentication. # (applies if you use pppd with chapms-strip-domain patch) #chapms-strip-domain # Encryption # (There have been multiple versions of PPP with encryption support, # choose with of the following sections you will use.) # BSD licensed ppp-2.4.2 upstream with MPPE only, kernel module ppp_mppe.o # {{{ refuse-pap refuse-chap refuse-mschap # Require the peer to authenticate itself using MS-CHAPv2 [Microsoft # Challenge Handshake Authentication Protocol, Version 2] authentication. require-mschap-v2 # Require MPPE 128-bit encryption # (note that MPPE requires the use of MSCHAP-V2 during authentication) require-mppe-128 # }}} # OpenSSL licensed ppp-2.4.1 fork with MPPE only, kernel module mppe.o # {{{ #-chap #-chapms # Require the peer to authenticate itself using MS-CHAPv2 [Microsoft # Challenge Handshake Authentication Protocol, Version 2] authentication. #+chapms-v2 # Require MPPE encryption # (note that MPPE requires the use of MSCHAP-V2 during authentication) #mppe-40 # enable either 40-bit or 128-bit, not both #mppe-128 #mppe-stateless # }}} # Network and Routing # If pppd is acting as a server for Microsoft Windows clients, this # option allows pppd to supply one or two DNS (Domain Name Server) # addresses to the clients. The first instance of this option # specifies the primary DNS address; the second instance (if given) # specifies the secondary DNS address. #ms-dns 10.0.0.1 #ms-dns 10.0.0.2 # If pppd is acting as a server for Microsoft Windows or "Samba" # clients, this option allows pppd to supply one or two WINS (Windows # Internet Name Services) server addresses to the clients. The first # instance of this option specifies the primary WINS address; the # second instance (if given) specifies the secondary WINS address. #ms-wins 10.0.0.3 #ms-wins 10.0.0.4 # Add an entry to this system's ARP [Address Resolution Protocol] # table with the IP address of the peer and the Ethernet address of this # system. This will have the effect of making the peer appear to other # systems to be on the local ethernet. # (you do not need this if your PPTP server is responsible for routing # packets to the clients -- James Cameron) proxyarp # Normally pptpd passes the IP address to pppd, but if pptpd has been # given the delegate option in pptpd.conf or the --delegate command line # option, then pppd will use chap-secrets or radius to allocate the # client IP address. The default local IP address used at the server # end is often the same as the address of the server. To override this, # specify the local IP address here. # (you must not use this unless you have used the delegate option) #10.8.0.100 # Logging # Enable connection debugging facilities. # (see your syslog configuration for where pppd sends to) debug # Print out all the option values which have been set. # (often requested by mailing list to verify options) #dump # Miscellaneous # Create a UUCP-style lock file for the pseudo-tty to ensure exclusive # access. lock # Disable BSD-Compress compression nobsdcomp # Disable Van Jacobson compression # (needed on some networks with Windows 9x/ME/XP clients, see posting to # poptop-server on 14th April 2005 by Pawel Pokrywka and followups, # http://marc.theaimsgroup.com/?t=111343175400006&r=1&w=2 ) novj novjccomp # turn off logging to stderr, since this may be redirected to pptpd, # which may trigger a loopback nologfd # put plugins here # (putting them higher up may cause them to sent messages to the pty) cat /etc/ppp/options.pptp on Client1 and Client2 ############################################################################### # $Id: options.pptp,v 1.3 2006/03/26 23:11:05 quozl Exp $ # # Sample PPTP PPP options file /etc/ppp/options.pptp # Options used by PPP when a connection is made by a PPTP client. # This file can be referred to by an /etc/ppp/peers file for the tunnel. # Changes are effective on the next connection. See "man pppd". # # You are expected to change this file to suit your system. As # packaged, it requires PPP 2.4.2 or later from http://ppp.samba.org/ # and the kernel MPPE module available from the CVS repository also on # http://ppp.samba.org/, which is packaged for DKMS as kernel_ppp_mppe. ############################################################################### # Lock the port lock # Authentication # We don't need the tunnel server to authenticate itself noauth # We won't do PAP, EAP, CHAP, or MSCHAP, but we will accept MSCHAP-V2 # (you may need to remove these refusals if the server is not using MPPE) refuse-pap refuse-eap refuse-chap refuse-mschap # Compression # Turn off compression protocols we know won't be used nobsdcomp nodeflate # Encryption # (There have been multiple versions of PPP with encryption support, # choose which of the following sections you will use. Note that MPPE # requires the use of MSCHAP-V2 during authentication) # # Note that using PPTP with MPPE and MSCHAP-V2 should be considered # insecure: # http://marc.info/?l=pptpclient-devel&m=134372640219039&w=2 # https://github.com/moxie0/chapcrack/blob/master/README.md # http://technet.microsoft.com/en-us/security/advisory/2743314 # http://ppp.samba.org/ the PPP project version of PPP by Paul Mackarras # ppp-2.4.2 or later with MPPE only, kernel module ppp_mppe.o # If the kernel is booted in FIPS mode (fips=1), the ppp_mppe.ko module # is not allowed and PPTP-MPPE is not available. # {{{ # Require MPPE 128-bit encryption #require-mppe-128 # }}} # http://mppe-mppc.alphacron.de/ fork from PPP project by Jan Dubiec # ppp-2.4.2 or later with MPPE and MPPC, kernel module ppp_mppe_mppc.o # {{{ # Require MPPE 128-bit encryption #mppe required,stateless # }}} IPtables are stopped on clients and server, Also net.ipv4.ip_forward = 1 is enabled on PPTP Server. How can i solve this problem .?

    Read the article

  • Integrating JavaScript Unit Tests with Visual Studio

    - by Stephen Walther
    Modern ASP.NET web applications take full advantage of client-side JavaScript to provide better interactivity and responsiveness. If you are building an ASP.NET application in the right way, you quickly end up with lots and lots of JavaScript code. When writing server code, you should be writing unit tests. One big advantage of unit tests is that they provide you with a safety net that enable you to safely modify your existing code – for example, fix bugs, add new features, and make performance enhancements -- without breaking your existing code. Every time you modify your code, you can execute your unit tests to verify that you have not broken anything. For the same reason that you should write unit tests for your server code, you should write unit tests for your client code. JavaScript is just as susceptible to bugs as C#. There is no shortage of unit testing frameworks for JavaScript. Each of the major JavaScript libraries has its own unit testing framework. For example, jQuery has QUnit, Prototype has UnitTestJS, YUI has YUI Test, and Dojo has Dojo Objective Harness (DOH). The challenge is integrating a JavaScript unit testing framework with Visual Studio. Visual Studio and Visual Studio ALM provide fantastic support for server-side unit tests. You can easily view the results of running your unit tests in the Visual Studio Test Results window. You can set up a check-in policy which requires that all unit tests pass before your source code can be committed to the source code repository. In addition, you can set up Team Build to execute your unit tests automatically. Unfortunately, Visual Studio does not provide “out-of-the-box” support for JavaScript unit tests. MS Test, the unit testing framework included in Visual Studio, does not support JavaScript unit tests. As soon as you leave the server world, you are left on your own. The goal of this blog entry is to describe one approach to integrating JavaScript unit tests with MS Test so that you can execute your JavaScript unit tests side-by-side with your C# unit tests. The goal is to enable you to execute JavaScript unit tests in exactly the same way as server-side unit tests. You can download the source code described by this project by scrolling to the end of this blog entry. Rejected Approach: Browser Launchers One popular approach to executing JavaScript unit tests is to use a browser as a test-driver. When you use a browser as a test-driver, you open up a browser window to execute and view the results of executing your JavaScript unit tests. For example, QUnit – the unit testing framework for jQuery – takes this approach. The following HTML page illustrates how you can use QUnit to create a unit test for a function named addNumbers(). <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"> <html> <head> <title>Using QUnit</title> <link rel="stylesheet" href="http://github.com/jquery/qunit/raw/master/qunit/qunit.css" type="text/css" /> </head> <body> <h1 id="qunit-header">QUnit example</h1> <h2 id="qunit-banner"></h2> <div id="qunit-testrunner-toolbar"></div> <h2 id="qunit-userAgent"></h2> <ol id="qunit-tests"></ol> <div id="qunit-fixture">test markup, will be hidden</div> <script type="text/javascript" src="http://code.jquery.com/jquery-latest.js"></script> <script type="text/javascript" src="http://github.com/jquery/qunit/raw/master/qunit/qunit.js"></script> <script type="text/javascript"> // The function to test function addNumbers(a, b) { return a+b; } // The unit test test("Test of addNumbers", function () { equals(4, addNumbers(1,3), "1+3 should be 4"); }); </script> </body> </html> This test verifies that calling addNumbers(1,3) returns the expected value 4. When you open this page in a browser, you can see that this test does, in fact, pass. The idea is that you can quickly refresh this QUnit HTML JavaScript test driver page in your browser whenever you modify your JavaScript code. In other words, you can keep a browser window open and keep refreshing it over and over while you are developing your application. That way, you can know very quickly whenever you have broken your JavaScript code. While easy to setup, there are several big disadvantages to this approach to executing JavaScript unit tests: You must view your JavaScript unit test results in a different location than your server unit test results. The JavaScript unit test results appear in the browser and the server unit test results appear in the Visual Studio Test Results window. Because all of your unit test results don’t appear in a single location, you are more likely to introduce bugs into your code without noticing it. Because your unit tests are not integrated with Visual Studio – in particular, MS Test -- you cannot easily include your JavaScript unit tests when setting up check-in policies or when performing automated builds with Team Build. A more sophisticated approach to using a browser as a test-driver is to automate the web browser. Instead of launching the browser and loading the test code yourself, you use a framework to automate this process. There are several different testing frameworks that support this approach: · Selenium – Selenium is a very powerful framework for automating browser tests. You can create your tests by recording a Firefox session or by writing the test driver code in server code such as C#. You can learn more about Selenium at http://seleniumhq.org/. LTAF – The ASP.NET team uses the Lightweight Test Automation Framework to test JavaScript code in the ASP.NET framework. You can learn more about LTAF by visiting the project home at CodePlex: http://aspnet.codeplex.com/releases/view/35501 jsTestDriver – This framework uses Java to automate the browser. jsTestDriver creates a server which can be used to automate multiple browsers simultaneously. This project is located at http://code.google.com/p/js-test-driver/ TestSwam – This framework, created by John Resig, uses PHP to automate the browser. Like jsTestDriver, the framework creates a test server. You can open multiple browsers that are automated by the test server. Learn more about TestSwarm by visiting the following address: https://github.com/jeresig/testswarm/wiki Yeti – This is the framework introduced by Yahoo for automating browser tests. Yeti uses server-side JavaScript and depends on Node.js. Learn more about Yeti at http://www.yuiblog.com/blog/2010/08/25/introducing-yeti-the-yui-easy-testing-interface/ All of these frameworks are great for integration tests – however, they are not the best frameworks to use for unit tests. In one way or another, all of these frameworks depend on executing tests within the context of a “living and breathing” browser. If you create an ASP.NET Unit Test then Visual Studio will launch a web server before executing the unit test. Why is launching a web server so bad? It is not the worst thing in the world. However, it does introduce dependencies that prevent your code from being tested in isolation. One of the defining features of a unit test -- versus an integration test – is that a unit test tests code in isolation. Another problem with launching a web server when performing unit tests is that launching a web server can be slow. If you cannot execute your unit tests quickly, you are less likely to execute your unit tests each and every time you make a code change. You are much more likely to fall into the pit of failure. Launching a browser when performing a JavaScript unit test has all of the same disadvantages as launching a web server when performing an ASP.NET unit test. Instead of testing a unit of JavaScript code in isolation, you are testing JavaScript code within the context of a particular browser. Using the frameworks listed above for integration tests makes perfect sense. However, I want to consider a different approach for creating unit tests for JavaScript code. Using Server-Side JavaScript for JavaScript Unit Tests A completely different approach to executing JavaScript unit tests is to perform the tests outside of any browser. If you really want to test JavaScript then you should test JavaScript and leave the browser out of the testing process. There are several ways that you can execute JavaScript on the server outside the context of any browser: Rhino – Rhino is an implementation of JavaScript written in Java. The Rhino project is maintained by the Mozilla project. Learn more about Rhino at http://www.mozilla.org/rhino/ V8 – V8 is the open-source Google JavaScript engine written in C++. This is the JavaScript engine used by the Chrome web browser. You can download V8 and embed it in your project by visiting http://code.google.com/p/v8/ JScript – JScript is the JavaScript Script Engine used by Internet Explorer (up to but not including Internet Explorer 9), Windows Script Host, and Active Server Pages. Internet Explorer is still the most popular web browser. Therefore, I decided to focus on using the JScript Script Engine to execute JavaScript unit tests. Using the Microsoft Script Control There are two basic ways that you can pass JavaScript to the JScript Script Engine and execute the code: use the Microsoft Windows Script Interfaces or use the Microsoft Script Control. The difficult and proper way to execute JavaScript using the JScript Script Engine is to use the Microsoft Windows Script Interfaces. You can learn more about the Script Interfaces by visiting http://msdn.microsoft.com/en-us/library/t9d4xf28(VS.85).aspx The main disadvantage of using the Script Interfaces is that they are difficult to use from .NET. There is a great series of articles on using the Script Interfaces from C# located at http://www.drdobbs.com/184406028. I picked the easier alternative and used the Microsoft Script Control. The Microsoft Script Control is an ActiveX control that provides a higher level abstraction over the Window Script Interfaces. You can download the Microsoft Script Control from here: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=d7e31492-2595-49e6-8c02-1426fec693ac After you download the Microsoft Script Control, you need to add a reference to it to your project. Select the Visual Studio menu option Project, Add Reference to open the Add Reference dialog. Select the COM tab and add the Microsoft Script Control 1.0. Using the Script Control is easy. You call the Script Control AddCode() method to add JavaScript code to the Script Engine. Next, you call the Script Control Run() method to run a particular JavaScript function. The reference documentation for the Microsoft Script Control is located at the MSDN website: http://msdn.microsoft.com/en-us/library/aa227633%28v=vs.60%29.aspx Creating the JavaScript Code to Test To keep things simple, let’s imagine that you want to test the following JavaScript function named addNumbers() which simply adds two numbers together: MvcApplication1\Scripts\Math.js function addNumbers(a, b) { return 5; } Notice that the addNumbers() method always returns the value 5. Right-now, it will not pass a good unit test. Create this file and save it in your project with the name Math.js in your MVC project’s Scripts folder (Save the file in your actual MVC application and not your MVC test application). Creating the JavaScript Test Helper Class To make it easier to use the Microsoft Script Control in unit tests, we can create a helper class. This class contains two methods: LoadFile() – Loads a JavaScript file. Use this method to load the JavaScript file being tested or the JavaScript file containing the unit tests. ExecuteTest() – Executes the JavaScript code. Use this method to execute a JavaScript unit test. Here’s the code for the JavaScriptTestHelper class: JavaScriptTestHelper.cs   using System; using System.IO; using Microsoft.VisualStudio.TestTools.UnitTesting; using MSScriptControl; namespace MvcApplication1.Tests { public class JavaScriptTestHelper : IDisposable { private ScriptControl _sc; private TestContext _context; /// <summary> /// You need to use this helper with Unit Tests and not /// Basic Unit Tests because you need a Test Context /// </summary> /// <param name="testContext">Unit Test Test Context</param> public JavaScriptTestHelper(TestContext testContext) { if (testContext == null) { throw new ArgumentNullException("TestContext"); } _context = testContext; _sc = new ScriptControl(); _sc.Language = "JScript"; _sc.AllowUI = false; } /// <summary> /// Load the contents of a JavaScript file into the /// Script Engine. /// </summary> /// <param name="path">Path to JavaScript file</param> public void LoadFile(string path) { var fileContents = File.ReadAllText(path); _sc.AddCode(fileContents); } /// <summary> /// Pass the path of the test that you want to execute. /// </summary> /// <param name="testMethodName">JavaScript function name</param> public void ExecuteTest(string testMethodName) { dynamic result = null; try { result = _sc.Run(testMethodName, new object[] { }); } catch { var error = ((IScriptControl)_sc).Error; if (error != null) { var description = error.Description; var line = error.Line; var column = error.Column; var text = error.Text; var source = error.Source; if (_context != null) { var details = String.Format("{0} \r\nLine: {1} Column: {2}", source, line, column); _context.WriteLine(details); } } throw new AssertFailedException(error.Description); } } public void Dispose() { _sc = null; } } }     Notice that the JavaScriptTestHelper class requires a Test Context to be instantiated. For this reason, you can use the JavaScriptTestHelper only with a Visual Studio Unit Test and not a Basic Unit Test (These are two different types of Visual Studio project items). Add the JavaScriptTestHelper file to your MVC test application (for example, MvcApplication1.Tests). Creating the JavaScript Unit Test Next, we need to create the JavaScript unit test function that we will use to test the addNumbers() function. Create a folder in your MVC test project named JavaScriptTests and add the following JavaScript file to this folder: MvcApplication1.Tests\JavaScriptTests\MathTest.js /// <reference path="JavaScriptUnitTestFramework.js"/> function testAddNumbers() { // Act var result = addNumbers(1, 3); // Assert assert.areEqual(4, result, "addNumbers did not return right value!"); }   The testAddNumbers() function takes advantage of another JavaScript library named JavaScriptUnitTestFramework.js. This library contains all of the code necessary to make assertions. Add the following JavaScriptnitTestFramework.js to the same folder as the MathTest.js file: MvcApplication1.Tests\JavaScriptTests\JavaScriptUnitTestFramework.js var assert = { areEqual: function (expected, actual, message) { if (expected !== actual) { throw new Error("Expected value " + expected + " is not equal to " + actual + ". " + message); } } }; There is only one type of assertion supported by this file: the areEqual() assertion. Most likely, you would want to add additional types of assertions to this file to make it easier to write your JavaScript unit tests. Deploying the JavaScript Test Files This step is non-intuitive. When you use Visual Studio to run unit tests, Visual Studio creates a new folder and executes a copy of the files in your project. After you run your unit tests, your Visual Studio Solution will contain a new folder named TestResults that includes a subfolder for each test run. You need to configure Visual Studio to deploy your JavaScript files to the test run folder or Visual Studio won’t be able to find your JavaScript files when you execute your unit tests. You will get an error that looks something like this when you attempt to execute your unit tests: You can configure Visual Studio to deploy your JavaScript files by adding a Test Settings file to your Visual Studio Solution. It is important to understand that you need to add this file to your Visual Studio Solution and not a particular Visual Studio project. Right-click your Solution in the Solution Explorer window and select the menu option Add, New Item. Select the Test Settings item and click the Add button. After you create a Test Settings file for your solution, you can indicate that you want a particular folder to be deployed whenever you perform a test run. Select the menu option Test, Edit Test Settings to edit your test configuration file. Select the Deployment tab and select your MVC test project’s JavaScriptTest folder to deploy. Click the Apply button and the Close button to save the changes and close the dialog. Creating the Visual Studio Unit Test The very last step is to create the Visual Studio unit test (the MS Test unit test). Add a new unit test to your MVC test project by selecting the menu option Add New Item and selecting the Unit Test project item (Do not select the Basic Unit Test project item): The difference between a Basic Unit Test and a Unit Test is that a Unit Test includes a Test Context. We need this Test Context to use the JavaScriptTestHelper class that we created earlier. Enter the following test method for the new unit test: [TestMethod] public void TestAddNumbers() { var jsHelper = new JavaScriptTestHelper(this.TestContext); // Load JavaScript files jsHelper.LoadFile("JavaScriptUnitTestFramework.js"); jsHelper.LoadFile(@"..\..\..\MvcApplication1\Scripts\Math.js"); jsHelper.LoadFile("MathTest.js"); // Execute JavaScript Test jsHelper.ExecuteTest("testAddNumbers"); } This code uses the JavaScriptTestHelper to load three files: JavaScripUnitTestFramework.js – Contains the assert functions. Math.js – Contains the addNumbers() function from your MVC application which is being tested. MathTest.js – Contains the JavaScript unit test function. Next, the test method calls the JavaScriptTestHelper ExecuteTest() method to execute the testAddNumbers() JavaScript function. Running the Visual Studio JavaScript Unit Test After you complete all of the steps described above, you can execute the JavaScript unit test just like any other unit test. You can use the keyboard combination CTRL-R, CTRL-A to run all of the tests in the current Visual Studio Solution. Alternatively, you can use the buttons in the Visual Studio toolbar to run the tests: (Unfortunately, the Run All Impacted Tests button won’t work correctly because Visual Studio won’t detect that your JavaScript code has changed. Therefore, you should use either the Run Tests in Current Context or Run All Tests in Solution options instead.) The results of running the JavaScript tests appear side-by-side with the results of running the server tests in the Test Results window. For example, if you Run All Tests in Solution then you will get the following results: Notice that the TestAddNumbers() JavaScript test has failed. That is good because our addNumbers() function is hard-coded to always return the value 5. If you double-click the failing JavaScript test, you can view additional details such as the JavaScript error message and the line number of the JavaScript code that failed: Summary The goal of this blog entry was to explain an approach to creating JavaScript unit tests that can be easily integrated with Visual Studio and Visual Studio ALM. I described how you can use the Microsoft Script Control to execute JavaScript on the server. By taking advantage of the Microsoft Script Control, we were able to execute our JavaScript unit tests side-by-side with all of our other unit tests and view the results in the standard Visual Studio Test Results window. You can download the code discussed in this blog entry from here: http://StephenWalther.com/downloads/Blog/JavaScriptUnitTesting/JavaScriptUnitTests.zip Before running this code, you need to first install the Microsoft Script Control which you can download from here: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=d7e31492-2595-49e6-8c02-1426fec693ac

    Read the article

  • Eclipse juno can not open with error " An error has occurred. See the log file",ubuntu 12.04

    - by ana
    I'm trying to lunch eclipse for first time ,I've download the package and installed it manually.here is the log file : !SESSION 2012-10-10 16:06:11.460 ----------------------------------------------- eclipse.buildId=M20120914-1800 java.fullversion=GNU libgcj 4.6.3 BootLoader constants: OS=linux, ARCH=x86_64, WS=gtk, NL=en_US Command-line arguments: -os linux -ws gtk -arch x86_64 !ENTRY org.eclipse.osgi 4 0 2012-10-10 16:06:19.756 !MESSAGE Could not start bundle: org.eclipse.equinox.console !STACK 0 org.osgi.framework.BundleException: Could not start bundle: org.eclipse.equinox.console at org.eclipse.osgi.framework.internal.core.ConsoleManager.checkForConsoleBundle(ConsoleManager.java:217) at org.eclipse.core.runtime.adaptor.EclipseStarter.startup(EclipseStarter.java:297) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:176) at java.lang.reflect.Method.invoke(libgcj.so.12) at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:629) at org.eclipse.equinox.launcher.Main.basicRun(Main.java:584) at org.eclipse.equinox.launcher.Main.run(Main.java:1438) at org.eclipse.equinox.launcher.Main.main(Main.java:1414) Caused by: org.osgi.framework.BundleException: Exception in org.eclipse.equinox.console.command.adapter.Activator.start() of bundle org.eclipse.equinox.console. at org.eclipse.osgi.framework.internal.core.BundleContextImpl.startActivator(BundleContextImpl.java:734) at org.eclipse.osgi.framework.internal.core.BundleContextImpl.start(BundleContextImpl.java:683) at org.eclipse.osgi.framework.internal.core.BundleHost.startWorker(BundleHost.java:381) at org.eclipse.osgi.framework.internal.core.AbstractBundle.start(AbstractBundle.java:300) at org.eclipse.osgi.framework.internal.core.ConsoleManager.checkForConsoleBundle(ConsoleManager.java:215) ...7 more Caused by: org.osgi.framework.BundleException: Exception in org.apache.felix.gogo.command.Activator.start() of bundle org.apache.felix.gogo.command. at org.eclipse.osgi.framework.internal.core.BundleContextImpl.startActivator(BundleContextImpl.java:734) at org.eclipse.osgi.framework.internal.core.BundleContextImpl.start(BundleContextImpl.java:683) at org.eclipse.osgi.framework.internal.core.BundleHost.startWorker(BundleHost.java:381) at org.eclipse.osgi.framework.internal.core.AbstractBundle.start(AbstractBundle.java:300) at org.eclipse.equinox.console.command.adapter.Activator.startBundle(Activator.java:248) at org.eclipse.equinox.console.command.adapter.Activator.start(Activator.java:239) at org.eclipse.osgi.framework.internal.core.BundleContextImpl$1.run(BundleContextImpl.java:711) at java.security.AccessController.doPrivileged(libgcj.so.12) at org.eclipse.osgi.framework.internal.core.BundleContextImpl.startActivator(BundleContextImpl.java:702) ...11 more Caused by: java.lang.NoClassDefFoundError: org.apache.felix.gogo.command.OBR at java.lang.Class.initializeClass(libgcj.so.12) at org.apache.felix.gogo.command.Activator.start(Activator.java:54) at org.eclipse.osgi.framework.internal.core.BundleContextImpl$1.run(BundleContextImpl.java:711) at java.security.AccessController.doPrivileged(libgcj.so.12) at org.eclipse.osgi.framework.internal.core.BundleContextImpl.startActivator(BundleContextImpl.java:702) ...19 more Caused by: java.lang.ClassNotFoundException: org.apache.felix.bundlerepository.Repository at org.eclipse.osgi.internal.loader.BundleLoader.findClassInternal(BundleLoader.java:501) at org.eclipse.osgi.internal.loader.BundleLoader.findClass(BundleLoader.java:421) at org.eclipse.osgi.internal.loader.BundleLoader.findClass(BundleLoader.java:412) at org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.loadClass(DefaultClassLoader.java:107) at java.lang.ClassLoader.loadClass(libgcj.so.12) at java.lang.Class.initializeClass(libgcj.so.12) ...23 more Root exception: java.lang.NoClassDefFoundError: org.apache.felix.gogo.command.OBR at java.lang.Class.initializeClass(libgcj.so.12) at !ENTRY org.eclipse.osgi 2 0 2012-10-10 16:06:30.433 !MESSAGE The following is a complete list of bundles which are not resolved, see the prior log entry for the root cause if it exists: !SUBENTRY 1 org.eclipse.osgi 2 0 2012-10-10 16:06:30.433 !MESSAGE Bundle com.sun.el_2.2.0.v201108011116 [4] was not resolved. !SUBENTRY 2 com.sun.el 2 0 2012-10-10 16:06:30.434 !MESSAGE Missing imported package javax.el_2.2.0. !SUBENTRY 2 com.sun.el 2 0 2012-10-10 16:06:30.434 !MESSAGE Missing imported package javax.servlet.http_2.5.0. !SUBENTRY 1 org.eclipse.osgi 2 0 2012-10-10 16:06:30.434 !MESSAGE Bundle javax.el_2.2.0.v201108011116 [6] was not resolved. !SUBENTRY 2 javax.el 2 0 2012-10-10 16:06:30.434 !MESSAGE Missing imported package javax.servlet_2.5.0. !SUBENTRY 2 javax.el 2 0 2012-10-10 16:06:30.434 !MESSAGE Missing imported package javax.servlet.http_2.5.0. !SUBENTRY 1 org.eclipse.osgi 2 0 2012-10-10 16:06:30.434 !MESSAGE Bundle javax.servlet_3.0.0.v201112011016 [8] was not resolved. !SUBENTRY 2 javax.servlet 2 0 2012-10-10 16:06:30.434 !MESSAGE Missing required capability Require-Capability: osgi.ee; filter="(&(osgi.ee=JavaSE)(version=1.6))". !SUBENTRY 1 org.eclipse.osgi 2 0 2012-10-10 16:06:30.434 !MESSAGE Bundle javax.servlet.jsp_2.2.0.v201112011158 [9] was not resolved. !SUBENTRY 2 javax.servlet.jsp 2 0 2012-10-10 16:06:30.434 !MESSAGE Missing imported package javax.el_2.2.0. !SUBENTRY 2 javax.servlet.jsp 2 0 2012-10-10 16:06:30.434 !MESSAGE Missing imported package javax.servlet_2.6.0. !SUBENTRY 2 javax.servlet.jsp 2 0 2012-10-10 16:06:30.434 !MESSAGE Missing imported package javax.servlet.http_2.6.0. !SUBENTRY 2 javax.servlet.jsp 2 0 2012-10-10 16:06:30.434 !MESSAGE Missing required capability Require-Capability: osgi.ee; filter="(&(osgi.ee=JavaSE)(version=1.6))". !SUBENTRY 1 org.eclipse.osgi 2 0 2012-10-10 16:06:30.434 !MESSAGE Bundle org.apache.jasper.glassfish_2.2.2.v201205150955 [21] was not resolved. !SUBENTRY 2 org.apache.jasper.glassfish 2 0 2012-10-10 16:06:30.434 !MESSAGE Missing imported package javax.el_2.2.0. !SUBENTRY 2 org.apache.jasper.glassfish 2 0 2012-10-10 16:06:30.434 !MESSAGE Missing imported package javax.servlet_2.6.0. !SUBENTRY 2 org.apache.jasper.glassfish 2 0 2012-10-10 16:06:30.434 !MESSAGE Missing imported package javax.servlet.descriptor_2.6.0. !SUBENTRY 2 org.apache.jasper.glassfish 2 0 2012-10-10 16:06:30.434 !MESSAGE Missing imported package javax.servlet.http_2.6.0. !SUBENTRY 2 org.apache.jasper.glassfish 2 0 2012-10-10 16:06:30.434 !MESSAGE Missing imported package javax.servlet.jsp_2.2.0. !SUBENTRY 2 org.apache.jasper.glassfish 2 0 2012-10-10 16:06:30.434 !MESSAGE Missing imported package javax.servlet.jsp.el_2.2.0. !SUBENTRY 2 org.apache.jasper.glassfish 2 0 2012-10-10 16:06:30.434 !MESSAGE Missing imported package javax.servlet.jsp.tagext_2.2.0. !SUBENTRY 2 org.apache.jasper.glassfish 2 0 2012-10-10 16:06:30.434 !MESSAGE Missing optionally imported package javax.tools_0.0.0. !SUBENTRY 2 org.apache.jasper.glassfish 2 0 2012-10-10 16:06:30.434 !MESSAGE Missing required capability Require-Capability: osgi.ee; filter="(&(osgi.ee=JavaSE)(version=1.6))". !SUBENTRY 1 org.eclipse.osgi 2 0 2012-10-10 16:06:30.434 !MESSAGE Bundle org.eclipse.equinox.http.jetty_3.0.0.v20120522-1841 [91] was not resolved. !SUBENTRY 2 org.eclipse.equinox.http.jetty 2 0 2012-10-10 16:06:30.434 !MESSAGE Missing imported package javax.servlet_[2.6.0,4.0.0). !SUBENTRY 2 org.eclipse.equinox.http.jetty 2 0 2012-10-10 16:06:30.435 !MESSAGE Missing imported package javax.servlet.http_[2.6.0,4.0.0). !SUBENTRY 2 org.eclipse.equinox.http.jetty 2 0 2012-10-10 16:06:30.435 !MESSAGE Missing imported package org.eclipse.equinox.http.servlet_1.0.0. !SUBENTRY 2 org.eclipse.equinox.http.jetty 2 0 2012-10-10 16:06:30.435 !MESSAGE Missing imported package org.eclipse.jetty.http_[8.0.0,9.0.0). !SUBENTRY 2 org.eclipse.equinox.http.jetty 2 0 2012-10-10 16:06:30.435 !MESSAGE Missing imported package org.eclipse.jetty.io.bio_[8.0.0,9.0.0). !SUBENTRY 2 org.eclipse.equinox.http.jetty 2 0 2012-10-10 16:06:30.435 !MESSAGE Missing imported package org.eclipse.jetty.io.nio_[8.0.0,9.0.0). !SUBENTRY 2 org.eclipse.equinox.http.jetty 2 0 2012-10-10 16:06:30.435 !MESSAGE Missing imported package org.eclipse.jetty.server_[8.0.0,9.0.0). !SUBENTRY 2 org.eclipse.equinox.http.jetty 2 0 2012-10-10 16:06:30.435 !MESSAGE Missing imported package org.eclipse.jetty.server.bio_[8.0.0,9.0.0). !SUBENTRY 2 org.eclipse.equinox.http.jetty 2 0 2012-10-10 16:06:30.435 !MESSAGE Missing imported package org.eclipse.jetty.server.handler_[8.0.0,9.0.0). !SUBENTRY 2 org.eclipse.equinox.http.jetty 2 0 2012-10-10 16:06:30.435 !MESSAGE Missing imported package org.eclipse.jetty.server.nio_[8.0.0,9.0.0). !SUBENTRY 2 org.eclipse.equinox.http.jetty 2 0 2012-10-10 16:06:30.435 !MESSAGE Missing imported package org.eclipse.jetty.server.session_[8.0.0,9.0.0). !SUBENTRY 2 org.eclipse.equinox.http.jetty 2 0 2012-10-10 16:06:30.435 !MESSAGE Missing imported package org.eclipse.jetty.server.ssl_[8.0.0,9.0.0). !SUBENTRY 2 org.eclipse.equinox.http.jetty 2 0 2012-10-10 16:06:30.435 !MESSAGE Missing imported package org.eclipse.jetty.servlet_[8.0.0,9.0.0). !SUBENTRY 2 org.eclipse.equinox.http.jetty 2 0 2012-10-10 16:06:30.435 !MESSAGE Missing imported package org.eclipse.jetty.util_[8.0.0,9.0.0). !SUBENTRY 2 org.eclipse.equinox.http.jetty 2 0 2012-10-10 16:06:30.435 !MESSAGE Missing imported package org.eclipse.jetty.util.component_[8.0.0,9.0.0). !SUBENTRY 2 org.eclipse.equinox.http.jetty 2 0 2012-10-10 16:06:30.435 !MESSAGE Missing imported package org.eclipse.jetty.util.log_[8.0.0,9.0.0). !SUBENTRY 1 org.eclipse.osgi 2 0 2012-10-10 16:06:30.435 !MESSAGE Bundle org.eclipse.equinox.http.registry_1.1.200.v20120522-2049 [92] was not resolved. !SUBENTRY 2 org.eclipse.equinox.http.registry 2 0 2012-10-10 16:06:30.435 !MESSAGE Missing imported package javax.servlet_2.3.0. !SUBENTRY 2 org.eclipse.equinox.http.registry 2 0 2012-10-10 16:06:30.435 !MESSAGE Missing imported package javax.servlet.http_2.3.0. !SUBENTRY 2 org.eclipse.equinox.http.registry 2 0 2012-10-10 16:06:30.435 !MESSAGE Missing required capability Require-Capability: osgi.ee; filter="(|(&(osgi.ee=CDC/Foundation)(version=1.0))(&(osgi.ee=JavaSE)(version=1.3)))". !SUBENTRY 1 org.eclipse.osgi 2 0 2012-10-10 16:06:30.435 !MESSAGE Bundle org.eclipse.equinox.http.servlet_1.1.300.v20120522-1841 [93] was not resolved. !SUBENTRY 2 org.eclipse.equinox.http.servlet 2 0 2012-10-10 16:06:30.435 !MESSAGE Missing imported package javax.servlet_[2.3.0,3.1.0). !SUBENTRY 2 org.eclipse.equinox.http.servlet 2 0 2012-10-10 16:06:30.435 !MESSAGE Missing optionally imported package javax.servlet.annotation_2.6.0. !SUBENTRY 2 org.eclipse.equinox.http.servlet 2 0 2012-10-10 16:06:30.435 !MESSAGE Missing optionally imported package javax.servlet.descriptor_2.6.0. !SUBENTRY 2 org.eclipse.equinox.http.servlet 2 0 2012-10-10 16:06:30.435 !MESSAGE Missing imported package javax.servlet.http_[2.3.0,3.1.0). !SUBENTRY 2 org.eclipse.equinox.http.servlet 2 0 2012-10-10 16:06:30.436 !MESSAGE Missing required capability Require-Capability: osgi.ee; filter="(|(&(osgi.ee=CDC/Foundation)(version=1.0))(&(osgi.ee=JavaSE)(version=1.3)))". !SUBENTRY 1 org.eclipse.osgi 2 0 2012-10-10 16:06:30.436 !MESSAGE Bundle org.eclipse.equinox.jsp.jasper_1.0.400.v20120522-2049 [94] was not resolved. !SUBENTRY 2 org.eclipse.equinox.jsp.jasper 2 0 2012-10-10 16:06:30.436 !MESSAGE Missing imported package javax.servlet_[2.4.0,3.1.0). !SUBENTRY 2 org.eclipse.equinox.jsp.jasper 2 0 2012-10-10 16:06:30.436 !MESSAGE Missing optionally imported package javax.servlet.annotation_2.6.0. !SUBENTRY 2 org.eclipse.equinox.jsp.jasper 2 0 2012-10-10 16:06:30.436 !MESSAGE Missing optionally imported package javax.servlet.descriptor_2.6.0. !SUBENTRY 2 org.eclipse.equinox.jsp.jasper 2 0 2012-10-10 16:06:30.436 !MESSAGE Missing imported package javax.servlet.http_[2.4.0,3.1.0). !SUBENTRY 2 org.eclipse.equinox.jsp.jasper 2 0 2012-10-10 16:06:30.436 !MESSAGE Missing imported package javax.servlet.jsp_[2.0.0,2.3.0). !SUBENTRY 2 org.eclipse.equinox.jsp.jasper 2 0 2012-10-10 16:06:30.436 !MESSAGE Missing imported package org.apache.jasper.servlet_[0.0.0,6.0.0). !SUBENTRY 2 org.eclipse.equinox.jsp.jasper 2 0 2012-10-10 16:06:30.436 !MESSAGE Missing required capability Require-Capability: osgi.ee; filter="(|(&(osgi.ee=CDC/Foundation)(version=1.0))(&(osgi.ee=JavaSE)(version=1.3)))". !SUBENTRY 1 org.eclipse.osgi 2 0 2012-10-10 16:06:30.436 !MESSAGE Bundle org.eclipse.equinox.jsp.jasper.registry_1.0.300.v20120522-2049 [95] was not resolved. !SUBENTRY 2 org.eclipse.equinox.jsp.jasper.registry 2 0 2012-10-10 16:06:30.436 !MESSAGE Missing imported package org.eclipse.equinox.jsp.jasper_0.0.0. !SUBENTRY 2 org.eclipse.equinox.jsp.jasper.registry 2 0 2012-10-10 16:06:30.436 !MESSAGE Missing imported package javax.servlet_2.4.0. !SUBENTRY 2 org.eclipse.equinox.jsp.jasper.registry 2 0 2012-10-10 16:06:30.436 !MESSAGE Missing imported package javax.servlet.http_2.4.0. !SUBENTRY 2 org.eclipse.equinox.jsp.jasper.registry 2 0 2012-10-10 16:06:30.436 !MESSAGE Missing required capability Require-Capability: osgi.ee; filter="(|(&(osgi.ee=CDC/Foundation)(version=1.0))(&(osgi.ee=JavaSE)(version=1.3)))". !SUBENTRY 1 org.eclipse.osgi 2 0 2012-10-10 16:06:30.436 !MESSAGE Bundle org.eclipse.help.webapp_3.6.101.v20120717-130216 [135] was not resolved. !SUBENTRY 2 org.eclipse.help.webapp 2 0 2012-10-10 16:06:30.436 !MESSAGE Missing required bundle org.eclipse.equinox.jsp.jasper.registry_1.0.100. !SUBENTRY 2 org.eclipse.help.webapp 2 0 2012-10-10 16:06:30.436 !MESSAGE Missing required bundle org.eclipse.equinox.http.registry_1.0.200. !SUBENTRY 2 org.eclipse.help.webapp 2 0 2012-10-10 16:06:30.436 !MESSAGE Missing imported package javax.servlet_2.4.0. !SUBENTRY 2 org.eclipse.help.webapp 2 0 2012-10-10 16:06:30.436 !MESSAGE Missing imported package javax.servlet.http_2.4.0. !SUBENTRY 1 org.eclipse.osgi 2 0 2012-10-10 16:06:30.437 !MESSAGE Bundle org.eclipse.jdt.apt.pluggable.core_1.0.400.v20120522-1651 [139] was not resolved. !SUBENTRY 2 org.eclipse.jdt.apt.pluggable.core 2 0 2012-10-10 16:06:30.437 !MESSAGE Missing imported package org.eclipse.jdt.internal.compiler.tool_0.0.0. !SUBENTRY 2 org.eclipse.jdt.apt.pluggable.core 2 0 2012-10-10 16:06:30.437 !MESSAGE Missing imported package org.eclipse.jdt.internal.compiler.apt.dispatch_0.0.0. !SUBENTRY 2 org.eclipse.jdt.apt.pluggable.core 2 0 2012-10-10 16:06:30.437 !MESSAGE Missing imported package org.eclipse.jdt.internal.compiler.apt.model_0.0.0. !SUBENTRY 2 org.eclipse.jdt.apt.pluggable.core 2 0 2012-10-10 16:06:30.437 !MESSAGE Missing imported package org.eclipse.jdt.internal.compiler.apt.util_0.0.0. !SUBENTRY 2 org.eclipse.jdt.apt.pluggable.core 2 0 2012-10-10 16:06:30.437 !MESSAGE Missing required capability Require-Capability: osgi.ee; filter="(&(osgi.ee=JavaSE)(version=1.6))". !SUBENTRY 1 org.eclipse.osgi 2 0 2012-10-10 16:06:30.437 !MESSAGE Bundle org.eclipse.jdt.compiler.apt_1.0.500.v20120522-1651 [141] was not resolved. !SUBENTRY 2 org.eclipse.jdt.compiler.apt 2 0 2012-10-10 16:06:30.437 !MESSAGE Missing optionally imported package org.eclipse.jdt.internal.compiler.tool_0.0.0. !SUBENTRY 2 org.eclipse.jdt.compiler.apt 2 0 2012-10-10 16:06:30.437 !MESSAGE Missing required capability Require-Capability: osgi.ee; filter="(&(osgi.ee=JavaSE)(version=1.6))". !SUBENTRY 1 org.eclipse.osgi 2 0 2012-10-10 16:06:30.437 !MESSAGE Bundle org.eclipse.jdt.compiler.tool_1.0.101.v20120522-1651 [142] was not resolved. !SUBENTRY 2 org.eclipse.jdt.compiler.tool 2 0 2012-10-10 16:06:30.437 !MESSAGE Missing required capability Require-Capability: osgi.ee; filter="(&(osgi.ee=JavaSE)(version=1.6))". !SUBENTRY 1 org.eclipse.osgi 2 0 2012-10-10 16:06:30.437 !MESSAGE Bundle org.eclipse.jetty.continuation_8.1.3.v20120522 [155] was not resolved. !SUBENTRY 2 org.eclipse.jetty.continuation 2 0 2012-10-10 16:06:30.437 !MESSAGE Missing imported package javax.servlet_2.6.0. !SUBENTRY 2 org.eclipse.jetty.continuation 2 0 2012-10-10 16:06:30.437 !MESSAGE Missing optionally imported package org.mortbay.log_[6.1.0,7.0.0). !SUBENTRY 2 org.eclipse.jetty.continuation 2 0 2012-10-10 16:06:30.437 !MESSAGE Missing optionally imported package org.mortbay.util.ajax_[6.1.0,7.0.0). !SUBENTRY 1 org.eclipse.osgi 2 0 2012-10-10 16:06:30.437 !MESSAGE Bundle org.eclipse.jetty.http_8.1.3.v20120522 [156] was not resolved. !SUBENTRY 2 org.eclipse.jetty.http 2 0 2012-10-10 16:06:30.437 !MESSAGE Missing imported package javax.servlet_2.6.0. !SUBENTRY 2 org.eclipse.jetty.http 2 0 2012-10-10 16:06:30.437 !MESSAGE Missing imported package javax.servlet.http_2.6.0. !SUBENTRY 2 org.eclipse.jetty.http 2 0 2012-10-10 16:06:30.437 !MESSAGE Missing imported package org.eclipse.jetty.io_[8.1.0,9.0.0). org.eclipse.jetty.util.resource_[8.1.0,9.0.0). !SUBENTRY 2 org.eclipse.jetty.http 2 0 2012-10-10 16:06:30.438 !MESSAGE Missing imported package org.eclipse.jetty.util.ssl_[8.1.0,9.0.0). !SUBENTRY 1 org.eclipse.osgi 2 0 2012-10-10 16:06:30.438 !MESSAGE Bundle org.eclipse.jetty.io_8.1.3.v20120522 [157] was not resolved. !SUBENTRY 2 org.eclipse.jetty.io 2 0 2012-10-10 16:06:30.438 !MESSAGE Missing imported package org.eclipse.jetty.util_[8.1.0,9.0.0). !SUBENTRY 2 org.eclipse.jetty.io 2 0 2012-10-10 16:06:30.438 !MESSAGE Missing imported package org.eclipse.jetty.util.component_[8.1.0,9.0.0). !SUBENTRY 2 org.eclipse.jetty.io 2 0 2012-10-10 16:06:30.438 !MESSAGE Missing imported package org.eclipse.jetty.util.log_[8.1.0,9.0.0). !SUBENTRY 2 org.eclipse.jetty.io 2 0 2012-10-10 16:06:30.438 !MESSAGE Missing imported package org.eclipse.jetty.util.thread_[8.1.0,9.0.0). !SUBENTRY 1 org.eclipse.osgi 2 0 2012-10-10 16:06:30.438 !MESSAGE Bundle org.eclipse.jetty.security_8.1.3.v20120522 [158] was not resolved. !SUBENTRY 2 org.eclipse.jetty.security 2 0 2012-10-10 16:06:30.438 !MESSAGE Missing imported package javax.servlet_2.6.0. !SUBENTRY 2 org.eclipse.jetty.security 2 0 2012-10-10 16:06:30.438 !MESSAGE Missing imported package javax.servlet.http_2.6.0. !SUBENTRY 2 org.eclipse.jetty.security 2 0 2012-10-10 16:06:30.438 !MESSAGE Missing imported package org.eclipse.jetty.http_[8.1.0,9.0.0). !SUBENTRY 2 org.eclipse.jetty.security 2 0 2012-10-10 16:06:30.438 !MESSAGE Missing imported package org.eclipse.jetty.server_[8.1.0,9.0.0). !SUBENTRY 2 org.eclipse.jetty.security 2 0 2012-10-10 16:06:30.438 org.eclipse.jetty.jmx_8.0.0. !SUBENTRY 2 org.eclipse.jetty.servlet 2 0 2012-10-10 16:06:30.439 !MESSAGE Missing imported package org.eclipse.jetty.security_[8.1.0,9.0.0). !SUBENTRY 2 org.eclipse.jetty.servlet 2 0 2012-10-10 16:06:30.440 !MESSAGE Missing imported package org.eclipse.jetty.server_[8.1.0,9.0.0). !SUBENTRY 2 org.eclipse.jetty.servlet 2 0 2012-10-10 16:06:30.440 !MESSAGE Missing imported package org.eclipse.jetty.server.handler_[8.1.0,9.0.0). !SUBENTRY 2 org.eclipse.jetty.servlet 2 0 2012-10-10 16:06:30.440 !MESSAGE Missing imported package org.eclipse.jetty.server.nio_[8.1.0,9.0.0). !SUBENTRY 2 org.eclipse.jetty.servlet 2 0 2012-10-10 16:06:30.440 !MESSAGE Missing imported package org.eclipse.jetty.server.session_[8.1.0,9.0.0). !SUBENTRY 2 org.eclipse.jetty.servlet 2 0 2012-10-10 16:06:30.440 !MESSAGE Missing imported package org.eclipse.jetty.server.ssl_[8.1.0,9.0.0). !SUBENTRY 2 org.eclipse.jetty.servlet 2 0 2012-10-10 16:06:30.440 !MESSAGE Missing optionally imported package org.eclipse.jetty.util_[8.1.0,9.0.0). !SUBENTRY 2 org.eclipse.jetty.servlet 2 0 2012-10-10 16:06:30.440 !MESSAGE Missing optionally imported package org.eclipse.jetty.util.component_[8.1.0,9.0.0). !SUBENTRY 2 org.eclipse.jetty.servlet 2 0 2012-10-10 16:06:30.440 !MESSAGE Missing optionally imported package org.eclipse.jetty.util.log_[8.1.0,9.0.0). !SUBENTRY 2 org.eclipse.jetty.servlet 2 0 2012-10-10 16:06:30.440 !MESSAGE Missing optionally imported package org.eclipse.jetty.util.resource_[8.1.0,9.0.0). !SUBENTRY 1 org.eclipse.osgi 2 0 2012-10-10 16:06:30.440 !MESSAGE Bundle org.eclipse.jetty.util_8.1.3.v20120522 [161] was not resolved. !SUBENTRY 2 org.eclipse.jetty.util 2 0 2012-10-10 16:06:30.440 !MESSAGE Missing imported package javax.servlet_2.6.0. !SUBENTRY 2 org.eclipse.jetty.util 2 0 2012-10-10 16:06:30.440 !MESSAGE Missing imported package javax.servlet.http_2.6.0. !SUBENTRY 2 org.eclipse.jetty.util 2 0 2012-10-10 16:06:30.440 !MESSAGE Missing optionally imported package org.slf4j_[1.5.0,2.0.0). !SUBENTRY 2 org.eclipse.jetty.util 2 0 2012-10-10 16:06:30.440 !MESSAGE Missing optionally imported package org.slf4j.helpers_[1.6.0,2.0.0). !SUBENTRY 2 org.eclipse.jetty.util 2 0 2012-10-10 16:06:30.440 !MESSAGE Missing optionally imported package org.slf4j.impl_[1.5.0,2.0.0). !SUBENTRY 2 org.eclipse.jetty.util 2 0 2012-10-10 16:06:30.440 !MESSAGE Missing optionally imported package org.slf4j.spi_[1.6.0,2.0.0). !ENTRY org.eclipse.osgi 4 0 2012-10-10 16:06:30.441 !MESSAGE Application error !STACK 1 java.lang.ArrayIndexOutOfBoundsException: 0 at org.eclipse.e4.core.internal.di.ConstructorRequestor.calcDependentObjects(ConstructorRequestor.java:79) at org.eclipse.e4.core.internal.di.Requestor.getDependentObjects(Requestor.java:143) at org.eclipse.e4.core.internal.di.InjectorImpl.resolveArgs(InjectorImpl.java:408) at org.eclipse.e4.core.internal.di.InjectorImpl.internalMake(InjectorImpl.java:312) at org.eclipse.e4.core.internal.di.InjectorImpl.make(InjectorImpl.java:240) at org.eclipse.e4.core.contexts.ContextInjectionFactory.make(ContextInjectionFactory.java:161) at org.eclipse.e4.ui.internal.workbench.swt.E4Application.createDefaultHeadlessContext(E4Application.java:420) at org.eclipse.e4.ui.internal.workbench.swt.E4Application.createDefaultContext(E4Application.java:434) at org.eclipse.e4.ui.internal.workbench.swt.E4Application.createE4Workbench(E4Application.java:182) at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:557) at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332) at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:543) at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149) at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:124) at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:353) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:180) at java.lang.reflect.Method.invoke(libgcj.so.12) at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:629) at org.eclipse.equinox.launcher.Main.basicRun(Main.java:584) at org.eclipse.equinox.launcher.Main.run(Main.java:1438) at org.eclipse.equinox.launcher.Main.main(Main.java:1414) would you please help me with this?

    Read the article

  • Toorcon14

    - by danx
    Toorcon 2012 Information Security Conference San Diego, CA, http://www.toorcon.org/ Dan Anderson, October 2012 It's almost Halloween, and we all know what that means—yes, of course, it's time for another Toorcon Conference! Toorcon is an annual conference for people interested in computer security. This includes the whole range of hackers, computer hobbyists, professionals, security consultants, press, law enforcement, prosecutors, FBI, etc. We're at Toorcon 14—see earlier blogs for some of the previous Toorcon's I've attended (back to 2003). This year's "con" was held at the Westin on Broadway in downtown San Diego, California. The following are not necessarily my views—I'm just the messenger—although I could have misquoted or misparaphrased the speakers. Also, I only reviewed some of the talks, below, which I attended and interested me. MalAndroid—the Crux of Android Infections, Aditya K. Sood Programming Weird Machines with ELF Metadata, Rebecca "bx" Shapiro Privacy at the Handset: New FCC Rules?, Valkyrie Hacking Measured Boot and UEFI, Dan Griffin You Can't Buy Security: Building the Open Source InfoSec Program, Boris Sverdlik What Journalists Want: The Investigative Reporters' Perspective on Hacking, Dave Maas & Jason Leopold Accessibility and Security, Anna Shubina Stop Patching, for Stronger PCI Compliance, Adam Brand McAfee Secure & Trustmarks — a Hacker's Best Friend, Jay James & Shane MacDougall MalAndroid—the Crux of Android Infections Aditya K. Sood, IOActive, Michigan State PhD candidate Aditya talked about Android smartphone malware. There's a lot of old Android software out there—over 50% Gingerbread (2.3.x)—and most have unpatched vulnerabilities. Of 9 Android vulnerabilities, 8 have known exploits (such as the old Gingerbread Global Object Table exploit). Android protection includes sandboxing, security scanner, app permissions, and screened Android app market. The Android permission checker has fine-grain resource control, policy enforcement. Android static analysis also includes a static analysis app checker (bouncer), and a vulnerablity checker. What security problems does Android have? User-centric security, which depends on the user to grant permission and make smart decisions. But users don't care or think about malware (the're not aware, not paranoid). All they want is functionality, extensibility, mobility Android had no "proper" encryption before Android 3.0 No built-in protection against social engineering and web tricks Alternative Android app markets are unsafe. Simply visiting some markets can infect Android Aditya classified Android Malware types as: Type A—Apps. These interact with the Android app framework. For example, a fake Netflix app. Or Android Gold Dream (game), which uploads user files stealthy manner to a remote location. Type K—Kernel. Exploits underlying Linux libraries or kernel Type H—Hybrid. These use multiple layers (app framework, libraries, kernel). These are most commonly used by Android botnets, which are popular with Chinese botnet authors What are the threats from Android malware? These incude leak info (contacts), banking fraud, corporate network attacks, malware advertising, malware "Hackivism" (the promotion of social causes. For example, promiting specific leaders of the Tunisian or Iranian revolutions. Android malware is frequently "masquerated". That is, repackaged inside a legit app with malware. To avoid detection, the hidden malware is not unwrapped until runtime. The malware payload can be hidden in, for example, PNG files. Less common are Android bootkits—there's not many around. What they do is hijack the Android init framework—alteering system programs and daemons, then deletes itself. For example, the DKF Bootkit (China). Android App Problems: no code signing! all self-signed native code execution permission sandbox — all or none alternate market places no robust Android malware detection at network level delayed patch process Programming Weird Machines with ELF Metadata Rebecca "bx" Shapiro, Dartmouth College, NH https://github.com/bx/elf-bf-tools @bxsays on twitter Definitions. "ELF" is an executable file format used in linking and loading executables (on UNIX/Linux-class machines). "Weird machine" uses undocumented computation sources (I think of them as unintended virtual machines). Some examples of "weird machines" are those that: return to weird location, does SQL injection, corrupts the heap. Bx then talked about using ELF metadata as (an uintended) "weird machine". Some ELF background: A compiler takes source code and generates a ELF object file (hello.o). A static linker makes an ELF executable from the object file. A runtime linker and loader takes ELF executable and loads and relocates it in memory. The ELF file has symbols to relocate functions and variables. ELF has two relocation tables—one at link time and another one at loading time: .rela.dyn (link time) and .dynsym (dynamic table). GOT: Global Offset Table of addresses for dynamically-linked functions. PLT: Procedure Linkage Tables—works with GOT. The memory layout of a process (not the ELF file) is, in order: program (+ heap), dynamic libraries, libc, ld.so, stack (which includes the dynamic table loaded into memory) For ELF, the "weird machine" is found and exploited in the loader. ELF can be crafted for executing viruses, by tricking runtime into executing interpreted "code" in the ELF symbol table. One can inject parasitic "code" without modifying the actual ELF code portions. Think of the ELF symbol table as an "assembly language" interpreter. It has these elements: instructions: Add, move, jump if not 0 (jnz) Think of symbol table entries as "registers" symbol table value is "contents" immediate values are constants direct values are addresses (e.g., 0xdeadbeef) move instruction: is a relocation table entry add instruction: relocation table "addend" entry jnz instruction: takes multiple relocation table entries The ELF weird machine exploits the loader by relocating relocation table entries. The loader will go on forever until told to stop. It stores state on stack at "end" and uses IFUNC table entries (containing function pointer address). The ELF weird machine, called "Brainfu*k" (BF) has: 8 instructions: pointer inc, dec, inc indirect, dec indirect, jump forward, jump backward, print. Three registers - 3 registers Bx showed example BF source code that implemented a Turing machine printing "hello, world". More interesting was the next demo, where bx modified ping. Ping runs suid as root, but quickly drops privilege. BF modified the loader to disable the library function call dropping privilege, so it remained as root. Then BF modified the ping -t argument to execute the -t filename as root. It's best to show what this modified ping does with an example: $ whoami bx $ ping localhost -t backdoor.sh # executes backdoor $ whoami root $ The modified code increased from 285948 bytes to 290209 bytes. A BF tool compiles "executable" by modifying the symbol table in an existing ELF executable. The tool modifies .dynsym and .rela.dyn table, but not code or data. Privacy at the Handset: New FCC Rules? "Valkyrie" (Christie Dudley, Santa Clara Law JD candidate) Valkyrie talked about mobile handset privacy. Some background: Senator Franken (also a comedian) became alarmed about CarrierIQ, where the carriers track their customers. Franken asked the FCC to find out what obligations carriers think they have to protect privacy. The carriers' response was that they are doing just fine with self-regulation—no worries! Carriers need to collect data, such as missed calls, to maintain network quality. But carriers also sell data for marketing. Verizon sells customer data and enables this with a narrow privacy policy (only 1 month to opt out, with difficulties). The data sold is not individually identifiable and is aggregated. But Verizon recommends, as an aggregation workaround to "recollate" data to other databases to identify customers indirectly. The FCC has regulated telephone privacy since 1934 and mobile network privacy since 2007. Also, the carriers say mobile phone privacy is a FTC responsibility (not FCC). FTC is trying to improve mobile app privacy, but FTC has no authority over carrier / customer relationships. As a side note, Apple iPhones are unique as carriers have extra control over iPhones they don't have with other smartphones. As a result iPhones may be more regulated. Who are the consumer advocates? Everyone knows EFF, but EPIC (Electrnic Privacy Info Center), although more obsecure, is more relevant. What to do? Carriers must be accountable. Opt-in and opt-out at any time. Carriers need incentive to grant users control for those who want it, by holding them liable and responsible for breeches on their clock. Location information should be added current CPNI privacy protection, and require "Pen/trap" judicial order to obtain (and would still be a lower standard than 4th Amendment). Politics are on a pro-privacy swing now, with many senators and the Whitehouse. There will probably be new regulation soon, and enforcement will be a problem, but consumers will still have some benefit. Hacking Measured Boot and UEFI Dan Griffin, JWSecure, Inc., Seattle, @JWSdan Dan talked about hacking measured UEFI boot. First some terms: UEFI is a boot technology that is replacing BIOS (has whitelisting and blacklisting). UEFI protects devices against rootkits. TPM - hardware security device to store hashs and hardware-protected keys "secure boot" can control at firmware level what boot images can boot "measured boot" OS feature that tracks hashes (from BIOS, boot loader, krnel, early drivers). "remote attestation" allows remote validation and control based on policy on a remote attestation server. Microsoft pushing TPM (Windows 8 required), but Google is not. Intel TianoCore is the only open source for UEFI. Dan has Measured Boot Tool at http://mbt.codeplex.com/ with a demo where you can also view TPM data. TPM support already on enterprise-class machines. UEFI Weaknesses. UEFI toolkits are evolving rapidly, but UEFI has weaknesses: assume user is an ally trust TPM implicitly, and attached to computer hibernate file is unprotected (disk encryption protects against this) protection migrating from hardware to firmware delays in patching and whitelist updates will UEFI really be adopted by the mainstream (smartphone hardware support, bank support, apathetic consumer support) You Can't Buy Security: Building the Open Source InfoSec Program Boris Sverdlik, ISDPodcast.com co-host Boris talked about problems typical with current security audits. "IT Security" is an oxymoron—IT exists to enable buiness, uptime, utilization, reporting, but don't care about security—IT has conflict of interest. There's no Magic Bullet ("blinky box"), no one-size-fits-all solution (e.g., Intrusion Detection Systems (IDSs)). Regulations don't make you secure. The cloud is not secure (because of shared data and admin access). Defense and pen testing is not sexy. Auditors are not solution (security not a checklist)—what's needed is experience and adaptability—need soft skills. Step 1: First thing is to Google and learn the company end-to-end before you start. Get to know the management team (not IT team), meet as many people as you can. Don't use arbitrary values such as CISSP scores. Quantitive risk assessment is a myth (e.g. AV*EF-SLE). Learn different Business Units, legal/regulatory obligations, learn the business and where the money is made, verify company is protected from script kiddies (easy), learn sensitive information (IP, internal use only), and start with low-hanging fruit (customer service reps and social engineering). Step 2: Policies. Keep policies short and relevant. Generic SANS "security" boilerplate policies don't make sense and are not followed. Focus on acceptable use, data usage, communications, physical security. Step 3: Implementation: keep it simple stupid. Open source, although useful, is not free (implementation cost). Access controls with authentication & authorization for local and remote access. MS Windows has it, otherwise use OpenLDAP, OpenIAM, etc. Application security Everyone tries to reinvent the wheel—use existing static analysis tools. Review high-risk apps and major revisions. Don't run different risk level apps on same system. Assume host/client compromised and use app-level security control. Network security VLAN != segregated because there's too many workarounds. Use explicit firwall rules, active and passive network monitoring (snort is free), disallow end user access to production environment, have a proxy instead of direct Internet access. Also, SSL certificates are not good two-factor auth and SSL does not mean "safe." Operational Controls Have change, patch, asset, & vulnerability management (OSSI is free). For change management, always review code before pushing to production For logging, have centralized security logging for business-critical systems, separate security logging from administrative/IT logging, and lock down log (as it has everything). Monitor with OSSIM (open source). Use intrusion detection, but not just to fulfill a checkbox: build rules from a whitelist perspective (snort). OSSEC has 95% of what you need. Vulnerability management is a QA function when done right: OpenVas and Seccubus are free. Security awareness The reality is users will always click everything. Build real awareness, not compliance driven checkbox, and have it integrated into the culture. Pen test by crowd sourcing—test with logging COSSP http://www.cossp.org/ - Comprehensive Open Source Security Project What Journalists Want: The Investigative Reporters' Perspective on Hacking Dave Maas, San Diego CityBeat Jason Leopold, Truthout.org The difference between hackers and investigative journalists: For hackers, the motivation varies, but method is same, technological specialties. For investigative journalists, it's about one thing—The Story, and they need broad info-gathering skills. J-School in 60 Seconds: Generic formula: Person or issue of pubic interest, new info, or angle. Generic criteria: proximity, prominence, timeliness, human interest, oddity, or consequence. Media awareness of hackers and trends: journalists becoming extremely aware of hackers with congressional debates (privacy, data breaches), demand for data-mining Journalists, use of coding and web development for Journalists, and Journalists busted for hacking (Murdock). Info gathering by investigative journalists include Public records laws. Federal Freedom of Information Act (FOIA) is good, but slow. California Public Records Act is a lot stronger. FOIA takes forever because of foot-dragging—it helps to be specific. Often need to sue (especially FBI). CPRA is faster, and requests can be vague. Dumps and leaks (a la Wikileaks) Journalists want: leads, protecting ourselves, our sources, and adapting tools for news gathering (Google hacking). Anonomity is important to whistleblowers. They want no digital footprint left behind (e.g., email, web log). They don't trust encryption, want to feel safe and secure. Whistleblower laws are very weak—there's no upside for whistleblowers—they have to be very passionate to do it. Accessibility and Security or: How I Learned to Stop Worrying and Love the Halting Problem Anna Shubina, Dartmouth College Anna talked about how accessibility and security are related. Accessibility of digital content (not real world accessibility). mostly refers to blind users and screenreaders, for our purpose. Accessibility is about parsing documents, as are many security issues. "Rich" executable content causes accessibility to fail, and often causes security to fail. For example MS Word has executable format—it's not a document exchange format—more dangerous than PDF or HTML. Accessibility is often the first and maybe only sanity check with parsing. They have no choice because someone may want to read what you write. Google, for example, is very particular about web browser you use and are bad at supporting other browsers. Uses JavaScript instead of links, often requiring mouseover to display content. PDF is a security nightmare. Executible format, embedded flash, JavaScript, etc. 15 million lines of code. Google Chrome doesn't handle PDF correctly, causing several security bugs. PDF has an accessibility checker and PDF tagging, to help with accessibility. But no PDF checker checks for incorrect tags, untagged content, or validates lists or tables. None check executable content at all. The "Halting Problem" is: can one decide whether a program will ever stop? The answer, in general, is no (Rice's theorem). The same holds true for accessibility checkers. Language-theoretic Security says complicated data formats are hard to parse and cannot be solved due to the Halting Problem. W3C Web Accessibility Guidelines: "Perceivable, Operable, Understandable, Robust" Not much help though, except for "Robust", but here's some gems: * all information should be parsable (paraphrasing) * if not parsable, cannot be converted to alternate formats * maximize compatibility in new document formats Executible webpages are bad for security and accessibility. They say it's for a better web experience. But is it necessary to stuff web pages with JavaScript for a better experience? A good example is The Drudge Report—it has hand-written HTML with no JavaScript, yet drives a lot of web traffic due to good content. A bad example is Google News—hidden scrollbars, guessing user input. Solutions: Accessibility and security problems come from same source Expose "better user experience" myth Keep your corner of Internet parsable Remember "Halting Problem"—recognize false solutions (checking and verifying tools) Stop Patching, for Stronger PCI Compliance Adam Brand, protiviti @adamrbrand, http://www.picfun.com/ Adam talked about PCI compliance for retail sales. Take an example: for PCI compliance, 50% of Brian's time (a IT guy), 960 hours/year was spent patching POSs in 850 restaurants. Often applying some patches make no sense (like fixing a browser vulnerability on a server). "Scanner worship" is overuse of vulnerability scanners—it gives a warm and fuzzy and it's simple (red or green results—fix reds). Scanners give a false sense of security. In reality, breeches from missing patches are uncommon—more common problems are: default passwords, cleartext authentication, misconfiguration (firewall ports open). Patching Myths: Myth 1: install within 30 days of patch release (but PCI §6.1 allows a "risk-based approach" instead). Myth 2: vendor decides what's critical (also PCI §6.1). But §6.2 requires user ranking of vulnerabilities instead. Myth 3: scan and rescan until it passes. But PCI §11.2.1b says this applies only to high-risk vulnerabilities. Adam says good recommendations come from NIST 800-40. Instead use sane patching and focus on what's really important. From NIST 800-40: Proactive: Use a proactive vulnerability management process: use change control, configuration management, monitor file integrity. Monitor: start with NVD and other vulnerability alerts, not scanner results. Evaluate: public-facing system? workstation? internal server? (risk rank) Decide:on action and timeline Test: pre-test patches (stability, functionality, rollback) for change control Install: notify, change control, tickets McAfee Secure & Trustmarks — a Hacker's Best Friend Jay James, Shane MacDougall, Tactical Intelligence Inc., Canada "McAfee Secure Trustmark" is a website seal marketed by McAfee. A website gets this badge if they pass their remote scanning. The problem is a removal of trustmarks act as flags that you're vulnerable. Easy to view status change by viewing McAfee list on website or on Google. "Secure TrustGuard" is similar to McAfee. Jay and Shane wrote Perl scripts to gather sites from McAfee and search engines. If their certification image changes to a 1x1 pixel image, then they are longer certified. Their scripts take deltas of scans to see what changed daily. The bottom line is change in TrustGuard status is a flag for hackers to attack your site. Entire idea of seals is silly—you're raising a flag saying if you're vulnerable.

    Read the article

  • Using BPEL Performance Statistics to Diagnose Performance Bottlenecks

    - by fip
    Tuning performance of Oracle SOA 11G applications could be challenging. Because SOA is a platform for you to build composite applications that connect many applications and "services", when the overall performance is slow, the bottlenecks could be anywhere in the system: the applications/services that SOA connects to, the infrastructure database, or the SOA server itself.How to quickly identify the bottleneck becomes crucial in tuning the overall performance. Fortunately, the BPEL engine in Oracle SOA 11G (and 10G, for that matter) collects BPEL Engine Performance Statistics, which show the latencies of low level BPEL engine activities. The BPEL engine performance statistics can make it a bit easier for you to identify the performance bottleneck. Although the BPEL engine performance statistics are always available, the access to and interpretation of them are somewhat obscure in the early and current (PS5) 11G versions. This blog attempts to offer instructions that help you to enable, retrieve and interpret the performance statistics, before the future versions provides a more pleasant user experience. Overview of BPEL Engine Performance Statistics  SOA BPEL has a feature of collecting some performance statistics and store them in memory. One MBean attribute, StatLastN, configures the size of the memory buffer to store the statistics. This memory buffer is a "moving window", in a way that old statistics will be flushed out by the new if the amount of data exceeds the buffer size. Since the buffer size is limited by StatLastN, impacts of statistics collection on performance is minimal. By default StatLastN=-1, which means no collection of performance data. Once the statistics are collected in the memory buffer, they can be retrieved via another MBean oracle.as.soainfra.bpel:Location=[Server Name],name=BPELEngine,type=BPELEngine.> My friend in Oracle SOA development wrote this simple 'bpelstat' web app that looks up and retrieves the performance data from the MBean and displays it in a human readable form. It does not have beautiful UI but it is fairly useful. Although in Oracle SOA 11.1.1.5 onwards the same statistics can be viewed via a more elegant UI under "request break down" at EM -> SOA Infrastructure -> Service Engines -> BPEL -> Statistics, some unsophisticated minds like mine may still prefer the simplicity of the 'bpelstat' JSP. One thing that simple JSP does do well is that you can save the page and send it to someone to further analyze Follows are the instructions of how to install and invoke the BPEL statistic JSP. My friend in SOA Development will soon blog about interpreting the statistics. Stay tuned. Step1: Enable BPEL Engine Statistics for Each SOA Servers via Enterprise Manager First st you need to set the StatLastN to some number as a way to enable the collection of BPEL Engine Performance Statistics EM Console -> soa-infra(Server Name) -> SOA Infrastructure -> SOA Administration -> BPEL Properties Click on "More BPEL Configuration Properties" Click on attribute "StatLastN", set its value to some integer number. Typically you want to set it 1000 or more. Step 2: Download and Deploy bpelstat.war File to Admin Server, Note: the WAR file contains a JSP that does NOT have any security restriction. You do NOT want to keep in your production server for a long time as it is a security hazard. Deactivate the war once you are done. Download the bpelstat.war to your local PC At WebLogic Console, Go to Deployments -> Install Click on the "upload your file(s)" Click the "Browse" button to upload the deployment to Admin Server Accept the uploaded file as the path, click next Check the default option "Install this deployment as an application" Check "AdminServer" as the target server Finish the rest of the deployment with default settings Console -> Deployments Check the box next to "bpelstat" application Click on the "Start" button. It will change the state of the app from "prepared" to "active" Step 3: Invoke the BPEL Statistic Tool The BPELStat tool merely call the MBean of BPEL server and collects and display the in-memory performance statics. You usually want to do that after some peak loads. Go to http://<admin-server-host>:<admin-server-port>/bpelstat Enter the correct admin hostname, port, username and password Enter the SOA Server Name from which you want to collect the performance statistics. For example, SOA_MS1, etc. Click Submit Keep doing the same for all SOA servers. Step 3: Interpret the BPEL Engine Statistics You will see a few categories of BPEL Statistics from the JSP Page. First it starts with the overall latency of BPEL processes, grouped by synchronous and asynchronous processes. Then it provides the further break down of the measurements through the life time of a BPEL request, which is called the "request break down". 1. Overall latency of BPEL processes The top of the page shows that the elapse time of executing the synchronous process TestSyncBPELProcess from the composite TestComposite averages at about 1543.21ms, while the elapse time of executing the asynchronous process TestAsyncBPELProcess from the composite TestComposite2 averages at about 1765.43ms. The maximum and minimum latency were also shown. Synchronous process statistics <statistics>     <stats key="default/TestComposite!2.0.2-ScopedJMSOSB*soa_bfba2527-a9ba-41a7-95c5-87e49c32f4ff/TestSyncBPELProcess" min="1234" max="4567" average="1543.21" count="1000">     </stats> </statistics> Asynchronous process statistics <statistics>     <stats key="default/TestComposite2!2.0.2-ScopedJMSOSB*soa_bfba2527-a9ba-41a7-95c5-87e49c32f4ff/TestAsyncBPELProcess" min="2234" max="3234" average="1765.43" count="1000">     </stats> </statistics> 2. Request break down Under the overall latency categorized by synchronous and asynchronous processes is the "Request breakdown". Organized by statistic keys, the Request breakdown gives finer grain performance statistics through the life time of the BPEL requests.It uses indention to show the hierarchy of the statistics. Request breakdown <statistics>     <stats key="eng-composite-request" min="0" max="0" average="0.0" count="0">         <stats key="eng-single-request" min="22" max="606" average="258.43" count="277">             <stats key="populate-context" min="0" max="0" average="0.0" count="248"> Please note that in SOA 11.1.1.6, the statistics under Request breakdown is aggregated together cross all the BPEL processes based on statistic keys. It does not differentiate between BPEL processes. If two BPEL processes happen to have the statistic that share same statistic key, the statistics from two BPEL processes will be aggregated together. Keep this in mind when we go through more details below. 2.1 BPEL process activity latencies A very useful measurement in the Request Breakdown is the performance statistics of the BPEL activities you put in your BPEL processes: Assign, Invoke, Receive, etc. The names of the measurement in the JSP page directly come from the names to assign to each BPEL activity. These measurements are under the statistic key "actual-perform" Example 1:  Follows is the measurement for BPEL activity "AssignInvokeCreditProvider_Input", which looks like the Assign activity in a BPEL process that assign an input variable before passing it to the invocation:                                <stats key="AssignInvokeCreditProvider_Input" min="1" max="8" average="1.9" count="153">                                     <stats key="sensor-send-activity-data" min="0" max="1" average="0.0" count="306">                                     </stats>                                     <stats key="sensor-send-variable-data" min="0" max="0" average="0.0" count="153">                                     </stats>                                     <stats key="monitor-send-activity-data" min="0" max="0" average="0.0" count="306">                                     </stats>                                 </stats> Note: because as previously mentioned that the statistics cross all BPEL processes are aggregated together based on statistic keys, if two BPEL processes happen to name their Invoke activity the same name, they will show up at one measurement (i.e. statistic key). Example 2: Follows is the measurement of BPEL activity called "InvokeCreditProvider". You can not only see that by average it takes 3.31ms to finish this call (pretty fast) but also you can see from the further break down that most of this 3.31 ms was spent on the "invoke-service".                                  <stats key="InvokeCreditProvider" min="1" max="13" average="3.31" count="153">                                     <stats key="initiate-correlation-set-again" min="0" max="0" average="0.0" count="153">                                     </stats>                                     <stats key="invoke-service" min="1" max="13" average="3.08" count="153">                                         <stats key="prep-call" min="0" max="1" average="0.04" count="153">                                         </stats>                                     </stats>                                     <stats key="initiate-correlation-set" min="0" max="0" average="0.0" count="153">                                     </stats>                                     <stats key="sensor-send-activity-data" min="0" max="0" average="0.0" count="306">                                     </stats>                                     <stats key="sensor-send-variable-data" min="0" max="0" average="0.0" count="153">                                     </stats>                                     <stats key="monitor-send-activity-data" min="0" max="0" average="0.0" count="306">                                     </stats>                                     <stats key="update-audit-trail" min="0" max="2" average="0.03" count="153">                                     </stats>                                 </stats> 2.2 BPEL engine activity latency Another type of measurements under Request breakdown are the latencies of underlying system level engine activities. These activities are not directly tied to a particular BPEL process or process activity, but they are critical factors in the overall engine performance. These activities include the latency of saving asynchronous requests to database, and latency of process dehydration. My friend Malkit Bhasin is working on providing more information on interpreting the statistics on engine activities on his blog (https://blogs.oracle.com/malkit/). I will update this blog once the information becomes available. Update on 2012-10-02: My friend Malkit Bhasin has published the detail interpretation of the BPEL service engine statistics at his blog http://malkit.blogspot.com/2012/09/oracle-bpel-engine-soa-suite.html.

    Read the article

  • Quick guide to Oracle IRM 11g: Classification design

    - by Simon Thorpe
    Quick guide to Oracle IRM 11g indexThis is the final article in the quick guide to Oracle IRM. If you've followed everything prior you will now have a fully functional and tested Information Rights Management service. It doesn't matter if you've been following the 10g or 11g guide as this next article is common to both. ContentsWhy this is the most important part... Understanding the classification and standard rights model Identifying business use cases Creating an effective IRM classification modelOne single classification across the entire businessA context for each and every possible granular use caseWhat makes a good context? Deciding on the use of roles in the context Reviewing the features and security for context roles Summary Why this is the most important part...Now the real work begins, installing and getting an IRM system running is as simple as following instructions. However to actually have an IRM technology easily protecting your most sensitive information without interfering with your users existing daily work flows and be able to scale IRM across the entire business, requires thought into how confidential documents are created, used and distributed. This article is going to give you the information you need to ask the business the right questions so that you can deploy your IRM service successfully. The IRM team here at Oracle have over 10 years of experience in helping customers and it is important you understand the following to be successful in securing access to your most confidential information. Whatever you are trying to secure, be it mergers and acquisitions information, engineering intellectual property, health care documentation or financial reports. No matter what type of user is going to access the information, be they employees, contractors or customers, there are common goals you are always trying to achieve.Securing the content at the earliest point possible and do it automatically. Removing the dependency on the user to decide to secure the content reduces the risk of mistakes significantly and therefore results a more secure deployment. K.I.S.S. (Keep It Simple Stupid) Reduce complexity in the rights/classification model. Oracle IRM lets you make changes to access to documents even after they are secured which allows you to start with a simple model and then introduce complexity once you've understood how the technology is going to be used in the business. After an initial learning period you can review your implementation and start to make informed decisions based on user feedback and administration experience. Clearly communicate to the user, when appropriate, any changes to their existing work practice. You must make every effort to make the transition to sealed content as simple as possible. For external users you must help them understand why you are securing the documents and inform them the value of the technology to both your business and them. Before getting into the detail, I must pay homage to Martin White, Vice President of client services in SealedMedia, the company Oracle acquired and who created Oracle IRM. In the SealedMedia years Martin was involved with every single customer and was key to the design of certain aspects of the IRM technology, specifically the context model we will be discussing here. Listening carefully to customers and understanding the flexibility of the IRM technology, Martin taught me all the skills of helping customers build scalable, effective and simple to use IRM deployments. No matter how well the engineering department designed the software, badly designed and poorly executed projects can result in difficult to use and manage, and ultimately insecure solutions. The advice and information that follows was born with Martin and he's still delivering IRM consulting with customers and can be found at www.thinkers.co.uk. It is from Martin and others that Oracle not only has the most advanced, scalable and usable document security solution on the market, but Oracle and their partners have the most experience in delivering successful document security solutions. Understanding the classification and standard rights model The goal of any successful IRM deployment is to balance the increase in security the technology brings without over complicating the way people use secured content and avoid a significant increase in administration and maintenance. With Oracle it is possible to automate the protection of content, deploy the desktop software transparently and use authentication methods such that users can open newly secured content initially unaware the document is any different to an insecure one. That is until of course they attempt to do something for which they don't have any rights, such as copy and paste to an insecure application or try and print. Central to achieving this objective is creating a classification model that is simple to understand and use but also provides the right level of complexity to meet the business needs. In Oracle IRM the term used for each classification is a "context". A context defines the relationship between.A group of related documents The people that use the documents The roles that these people perform The rights that these people need to perform their role The context is the key to the success of Oracle IRM. It provides the separation of the role and rights of a user from the content itself. Documents are sealed to contexts but none of the rights, user or group information is stored within the content itself. Sealing only places information about the location of the IRM server that sealed it, the context applied to the document and a few other pieces of metadata that pertain only to the document. This important separation of rights from content means that millions of documents can be secured against a single classification and a user needs only one right assigned to be able to access all documents. If you have followed all the previous articles in this guide, you will be ready to start defining contexts to which your sensitive information will be protected. But before you even start with IRM, you need to understand how your own business uses and creates sensitive documents and emails. Identifying business use cases Oracle is able to support multiple classification systems, but usually there is one single initial need for the technology which drives a deployment. This need might be to protect sensitive mergers and acquisitions information, engineering intellectual property, financial documents. For this and every subsequent use case you must understand how users create and work with documents, to who they are distributed and how the recipients should interact with them. A successful IRM deployment should start with one well identified use case (we go through some examples towards the end of this article) and then after letting this use case play out in the business, you learn how your users work with content, how well your communication to the business worked and if the classification system you deployed delivered the right balance. It is at this point you can start rolling the technology out further. Creating an effective IRM classification model Once you have selected the initial use case you will address with IRM, you need to design a classification model that defines the access to secured documents within the use case. In Oracle IRM there is an inbuilt classification system called the "context" model. In Oracle IRM 11g it is possible to extend the server to support any rights classification model, but the majority of users who are not using an application integration (such as Oracle IRM within Oracle Beehive) are likely to be starting out with the built in context model. Before looking at creating a classification system with IRM, it is worth reviewing some recognized standards and methods for creating and implementing security policy. A very useful set of documents are the ISO 17799 guidelines and the SANS security policy templates. First task is to create a context against which documents are to be secured. A context consists of a group of related documents (all top secret engineering research), a list of roles (contributors and readers) which define how users can access documents and a list of users (research engineers) who have been given a role allowing them to interact with sealed content. Before even creating the first context it is wise to decide on a philosophy which will dictate the level of granularity, the question is, where do you start? At a department level? By project? By technology? First consider the two ends of the spectrum... One single classification across the entire business Imagine that instead of having separate contexts, one for engineering intellectual property, one for your financial data, one for human resources personally identifiable information, you create one context for all documents across the entire business. Whilst you may have immediate objections, there are some significant benefits in thinking about considering this. Document security classification decisions are simple. You only have one context to chose from! User provisioning is simple, just make sure everyone has a role in the only context in the business. Administration is very low, if you assign rights to groups from the business user repository you probably never have to touch IRM administration again. There are however some obvious downsides to this model.All users in have access to all IRM secured content. So potentially a sales person could access sensitive mergers and acquisition documents, if they can get their hands on a copy that is. You cannot delegate control of different documents to different parts of the business, this may not satisfy your regulatory requirements for the separation and delegation of duties. Changing a users role affects every single document ever secured. Even though it is very unlikely a business would ever use one single context to secure all their sensitive information, thinking about this scenario raises one very important point. Just having one single context and securing all confidential documents to it, whilst incurring some of the problems detailed above, has one huge value. Once secured, IRM protected content can ONLY be accessed by authorized users. Just think of all the sensitive documents in your business today, imagine if you could ensure that only everyone you trust could open them. Even if an employee lost a laptop or someone accidentally sent an email to the wrong recipient, only the right people could open that file. A context for each and every possible granular use case Now let's think about the total opposite of a single context design. What if you created a context for each and every single defined business need and created multiple contexts within this for each level of granularity? Let's take a use case where we need to protect engineering intellectual property. Imagine we have 6 different engineering groups, and in each we have a research department, a design department and manufacturing. The company information security policy defines 3 levels of information sensitivity... restricted, confidential and top secret. Then let's say that each group and department needs to define access to information from both internal and external users. Finally add into the mix that they want to review the rights model for each context every financial quarter. This would result in a huge amount of contexts. For example, lets just look at the resulting contexts for one engineering group. Q1FY2010 Restricted Internal - Engineering Group 1 - Research Q1FY2010 Restricted Internal - Engineering Group 1 - Design Q1FY2010 Restricted Internal - Engineering Group 1 - Manufacturing Q1FY2010 Restricted External- Engineering Group 1 - Research Q1FY2010 Restricted External - Engineering Group 1 - Design Q1FY2010 Restricted External - Engineering Group 1 - Manufacturing Q1FY2010 Confidential Internal - Engineering Group 1 - Research Q1FY2010 Confidential Internal - Engineering Group 1 - Design Q1FY2010 Confidential Internal - Engineering Group 1 - Manufacturing Q1FY2010 Confidential External - Engineering Group 1 - Research Q1FY2010 Confidential External - Engineering Group 1 - Design Q1FY2010 Confidential External - Engineering Group 1 - Manufacturing Q1FY2010 Top Secret Internal - Engineering Group 1 - Research Q1FY2010 Top Secret Internal - Engineering Group 1 - Design Q1FY2010 Top Secret Internal - Engineering Group 1 - Manufacturing Q1FY2010 Top Secret External - Engineering Group 1 - Research Q1FY2010 Top Secret External - Engineering Group 1 - Design Q1FY2010 Top Secret External - Engineering Group 1 - Manufacturing Now multiply the above by 6 for each engineering group, 18 contexts. You are then creating/reviewing another 18 every 3 months. After a year you've got 72 contexts. What would be the advantages of such a complex classification model? You can satisfy very granular rights requirements, for example only an authorized engineering group 1 researcher can create a top secret report for access internally, and his role will be reviewed on a very frequent basis. Your business may have very complex rights requirements and mapping this directly to IRM may be an obvious exercise. The disadvantages of such a classification model are significant...Huge administrative overhead. Someone in the business must manage, review and administrate each of these contexts. If the engineering group had a single administrator, they would have 72 classifications to reside over each year. From an end users perspective life will be very confusing. Imagine if a user has rights in just 6 of these contexts. They may be able to print content from one but not another, be able to edit content in 2 contexts but not the other 4. Such confusion at the end user level causes frustration and resistance to the use of the technology. Increased synchronization complexity. Imagine a user who after 3 years in the company ends up with over 300 rights in many different contexts across the business. This would result in long synchronization times as the client software updates all your offline rights. Hard to understand who can do what with what. Imagine being the VP of engineering and as part of an internal security audit you are asked the question, "What rights to researchers have to our top secret information?". In this complex model the answer is not simple, it would depend on many roles in many contexts. Of course this example is extreme, but it highlights that trying to build many barriers in your business can result in a nightmare of administration and confusion amongst users. In the real world what we need is a balance of the two. We need to seek an optimum number of contexts. Too many contexts are unmanageable and too few contexts does not give fine enough granularity. What makes a good context? Good context design derives mainly from how well you understand your business requirements to secure access to confidential information. Some customers I have worked with can tell me exactly the documents they wish to secure and know exactly who should be opening them. However there are some customers who know only of the government regulation that requires them to control access to certain types of information, they don't actually know where the documents are, how they are created or understand exactly who should have access. Therefore you need to know how to ask the business the right questions that lead to information which help you define a context. First ask these questions about a set of documentsWhat is the topic? Who are legitimate contributors on this topic? Who are the authorized readership? If the answer to any one of these is significantly different, then it probably merits a separate context. Remember that sealed documents are inherently secure and as such they cannot leak to your competitors, therefore it is better sealed to a broad context than not sealed at all. Simplicity is key here. Always revert to the first extreme example of a single classification, then work towards essential complexity. If there is any doubt, always prefer fewer contexts. Remember, Oracle IRM allows you to change your mind later on. You can implement a design now and continue to change and refine as you learn how the technology is used. It is easy to go from a simple model to a more complex one, it is much harder to take a complex model that is already embedded in the work practice of users and try to simplify it. It is also wise to take a single use case and address this first with the business. Don't try and tackle many different problems from the outset. Do one, learn from the process, refine it and then take what you have learned into the next use case, refine and continue. Once you have a good grasp of the technology and understand how your business will use it, you can then start rolling out the technology wider across the business. Deciding on the use of roles in the context Once you have decided on that first initial use case and a context to create let's look at the details you need to decide upon. For each context, identify; Administrative rolesBusiness owner, the person who makes decisions about who may or may not see content in this context. This is often the person who wanted to use IRM and drove the business purchase. They are the usually the person with the most at risk when sensitive information is lost. Point of contact, the person who will handle requests for access to content. Sometimes the same as the business owner, sometimes a trusted secretary or administrator. Context administrator, the person who will enact the decisions of the Business Owner. Sometimes the point of contact, sometimes a trusted IT person. Document related rolesContributors, the people who create and edit documents in this context. Reviewers, the people who are involved in reviewing documents but are not trusted to secure information to this classification. This role is not always necessary. (See later discussion on Published-work and Work-in-Progress) Readers, the people who read documents from this context. Some people may have several of the roles above, which is fine. What you are trying to do is understand and define how the business interacts with your sensitive information. These roles obviously map directly to roles available in Oracle IRM. Reviewing the features and security for context roles At this point we have decided on a classification of information, understand what roles people in the business will play when administrating this classification and how they will interact with content. The final piece of the puzzle in getting the information for our first context is to look at the permissions people will have to sealed documents. First think why are you protecting the documents in the first place? It is to prevent the loss of leaking of information to the wrong people. To control the information, making sure that people only access the latest versions of documents. You are not using Oracle IRM to prevent unauthorized people from doing legitimate work. This is an important point, with IRM you can erect many barriers to prevent access to content yet too many restrictions and authorized users will often find ways to circumvent using the technology and end up distributing unprotected originals. Because IRM is a security technology, it is easy to get carried away restricting different groups. However I would highly recommend starting with a simple solution with few restrictions. Ensure that everyone who reasonably needs to read documents can do so from the outset. Remember that with Oracle IRM you can change rights to content whenever you wish and tighten security. Always return to the fact that the greatest value IRM brings is that ONLY authorized users can access secured content, remember that simple "one context for the entire business" model. At the start of the deployment you really need to aim for user acceptance and therefore a simple model is more likely to succeed. As time passes and users understand how IRM works you can start to introduce more restrictions and complexity. Another key aspect to focus on is handling exceptions. If you decide on a context model where engineering can only access engineering information, and sales can only access sales data. Act quickly when a sales manager needs legitimate access to a set of engineering documents. Having a quick and effective process for permitting other people with legitimate needs to obtain appropriate access will be rewarded with acceptance from the user community. These use cases can often be satisfied by integrating IRM with a good Identity & Access Management technology which simplifies the process of assigning users the correct business roles. The big print issue... Printing is often an issue of contention, users love to print but the business wants to ensure sensitive information remains in the controlled digital world. There are many cases of physical document loss causing a business pain, it is often overlooked that IRM can help with this issue by limiting the ability to generate physical copies of digital content. However it can be hard to maintain a balance between security and usability when it comes to printing. Consider the following points when deciding about whether to give print rights. Oracle IRM sealed documents can contain watermarks that expose information about the user, time and location of access and the classification of the document. This information would reside in the printed copy making it easier to trace who printed it. Printed documents are slower to distribute in comparison to their digital counterparts, so time sensitive information in printed format may present a lower risk. Print activity is audited, therefore you can monitor and react to users abusing print rights. Summary In summary it is important to think carefully about the way you create your context model. As you ask the business these questions you may get a variety of different requirements. There may be special projects that require a context just for sensitive information created during the lifetime of the project. There may be a department that requires all information in the group is secured and you might have a few senior executives who wish to use IRM to exchange a small number of highly sensitive documents with a very small number of people. Oracle IRM, with its very flexible context classification system, can support all of these use cases. The trick is to introducing the complexity to deliver them at the right level. In another article i'm working on I will go through some examples of how Oracle IRM might map to existing business use cases. But for now, this article covers all the important questions you need to get your IRM service deployed and successfully protecting your most sensitive information.

    Read the article

  • Diving into OpenStack Network Architecture - Part 1

    - by Ronen Kofman
    v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} rkofman Normal rkofman 83 3045 2014-05-23T21:11:00Z 2014-05-27T06:58:00Z 3 1883 10739 Oracle Corporation 89 25 12597 12.00 140 Clean Clean false false false false EN-US X-NONE HE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:Arial; mso-bidi-theme-font:minor-bidi; mso-bidi-language:AR-SA;} Before we begin OpenStack networking has very powerful capabilities but at the same time it is quite complicated. In this blog series we will review an existing OpenStack setup using the Oracle OpenStack Tech Preview and explain the different network components through use cases and examples. The goal is to show how the different pieces come together and provide a bigger picture view of the network architecture in OpenStack. This can be very helpful to users making their first steps in OpenStack or anyone wishes to understand how networking works in this environment.  We will go through the basics first and build the examples as we go. According to the recent Icehouse user survey and the one before it, Neutron with Open vSwitch plug-in is the most widely used network setup both in production and in POCs (in terms of number of customers) and so in this blog series we will analyze this specific OpenStack networking setup. As we know there are many options to setup OpenStack networking and while Neturon + Open vSwitch is the most popular setup there is no claim that it is either best or the most efficient option. Neutron + Open vSwitch is an example, one which provides a good starting point for anyone interested in understanding OpenStack networking. Even if you are using different kind of network setup such as different Neutron plug-in or even not using Neutron at all this will still be a good starting point to understand the network architecture in OpenStack. The setup we are using for the examples is the one used in the Oracle OpenStack Tech Preview. Installing it is simple and it would be helpful to have it as reference. In this setup we use eth2 on all servers for VM network, all VM traffic will be flowing through this interface.The Oracle OpenStack Tech Preview is using VLANs for L2 isolation to provide tenant and network isolation. The following diagram shows how we have configured our deployment: This first post is a bit long and will focus on some basic concepts in OpenStack networking. The components we will be discussing are Open vSwitch, network namespaces, Linux bridge and veth pairs. Note that this is not meant to be a comprehensive review of these components, it is meant to describe the component as much as needed to understand OpenStack network architecture. All the components described here can be further explored using other resources. Open vSwitch (OVS) In the Oracle OpenStack Tech Preview OVS is used to connect virtual machines to the physical port (in our case eth2) as shown in the deployment diagram. OVS contains bridges and ports, the OVS bridges are different from the Linux bridge (controlled by the brctl command) which are also used in this setup. To get started let’s view the OVS structure, use the following command: # ovs-vsctl show 7ec51567-ab42-49e8-906d-b854309c9edf     Bridge br-int         Port br-int             Interface br-int type: internal         Port "int-br-eth2"             Interface "int-br-eth2"     Bridge "br-eth2"         Port "br-eth2"             Interface "br-eth2" type: internal         Port "eth2"             Interface "eth2"         Port "phy-br-eth2"             Interface "phy-br-eth2" ovs_version: "1.11.0" We see a standard post deployment OVS on a compute node with two bridges and several ports hanging off of each of them. The example above is a compute node without any VMs, we can see that the physical port eth2 is connected to a bridge called “br-eth2”. We also see two ports "int-br-eth2" and "phy-br-eth2" which are actually a veth pair and form virtual wire between the two bridges, veth pairs are discussed later in this post. When a virtual machine is created a port is created on one the br-int bridge and this port is eventually connected to the virtual machine (we will discuss the exact connectivity later in the series). Here is how OVS looks after a VM was launched: # ovs-vsctl show efd98c87-dc62-422d-8f73-a68c2a14e73d     Bridge br-int         Port "int-br-eth2"             Interface "int-br-eth2"         Port br-int             Interface br-int type: internal         Port "qvocb64ea96-9f" tag: 1             Interface "qvocb64ea96-9f"     Bridge "br-eth2"         Port "phy-br-eth2"             Interface "phy-br-eth2"         Port "br-eth2"             Interface "br-eth2" type: internal         Port "eth2"             Interface "eth2" ovs_version: "1.11.0" Bridge "br-int" now has a new port "qvocb64ea96-9f" which connects to the VM and tagged with VLAN 1. Every VM which will be launched will add a port on the “br-int” bridge for every network interface the VM has. Another useful command on OVS is dump-flows for example: # ovs-ofctl dump-flows br-int NXST_FLOW reply (xid=0x4): cookie=0x0, duration=735.544s, table=0, n_packets=70, n_bytes=9976, idle_age=17, priority=3,in_port=1,dl_vlan=1000 actions=mod_vlan_vid:1,NORMAL cookie=0x0, duration=76679.786s, table=0, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=2,in_port=1 actions=drop cookie=0x0, duration=76681.36s, table=0, n_packets=68, n_bytes=7950, idle_age=17, hard_age=65534, priority=1 actions=NORMAL As we see the port which is connected to the VM has the VLAN tag 1. However the port on the VM network (eth2) will be using tag 1000. OVS is modifying the vlan as the packet flow from the VM to the physical interface. In OpenStack the Open vSwitch agent takes care of programming the flows in Open vSwitch so the users do not have to deal with this at all. If you wish to learn more about how to program the Open vSwitch you can read more about it at http://openvswitch.org looking at the documentation describing the ovs-ofctl command. Network Namespaces (netns) Network namespaces is a very cool Linux feature can be used for many purposes and is heavily used in OpenStack networking. Network namespaces are isolated containers which can hold a network configuration and is not seen from outside of the namespace. A network namespace can be used to encapsulate specific network functionality or provide a network service in isolation as well as simply help to organize a complicated network setup. Using the Oracle OpenStack Tech Preview we are using the latest Unbreakable Enterprise Kernel R3 (UEK3), this kernel provides a complete support for netns. Let's see how namespaces work through couple of examples to control network namespaces we use the ip netns command: Defining a new namespace: # ip netns add my-ns # ip netns list my-ns As mentioned the namespace is an isolated container, we can perform all the normal actions in the namespace context using the exec command for example running the ifconfig command: # ip netns exec my-ns ifconfig -a lo        Link encap:Local Loopback           LOOPBACK  MTU:16436 Metric:1           RX packets:0 errors:0 dropped:0 overruns:0 frame:0           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0           RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b) We can run every command in the namespace context, this is especially useful for debug using tcpdump command, we can ping or ssh or define iptables all within the namespace. Connecting the namespace to the outside world: There are various ways to connect into a namespaces and between namespaces we will focus on how this is done in OpenStack. OpenStack uses a combination of Open vSwitch and network namespaces. OVS defines the interfaces and then we can add those interfaces to namespace. So first let's add a bridge to OVS: # ovs-vsctl add-br my-bridge Now let's add a port on the OVS and make it internal: # ovs-vsctl add-port my-bridge my-port # ovs-vsctl set Interface my-port type=internal And let's connect it into the namespace: # ip link set my-port netns my-ns Looking inside the namespace: # ip netns exec my-ns ifconfig -a lo        Link encap:Local Loopback           LOOPBACK  MTU:65536 Metric:1           RX packets:0 errors:0 dropped:0 overruns:0 frame:0           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0           RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b) my-port   Link encap:Ethernet HWaddr 22:04:45:E2:85:21           BROADCAST  MTU:1500 Metric:1           RX packets:0 errors:0 dropped:0 overruns:0 frame:0           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0           RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b) Now we can add more ports to the OVS bridge and connect it to other namespaces or other device like physical interfaces. Neutron is using network namespaces to implement network services such as DCHP, routing, gateway, firewall, load balance and more. In the next post we will go into this in further details. Linux Bridge and veth pairs Linux bridge is used to connect the port from OVS to the VM. Every port goes from the OVS bridge to a Linux bridge and from there to the VM. The reason for using regular Linux bridges is for security groups’ enforcement. Security groups are implemented using iptables and iptables can only be applied to Linux bridges and not to OVS bridges. Veth pairs are used extensively throughout the network setup in OpenStack and are also a good tool to debug a network problem. Veth pairs are simply a virtual wire and so veths always come in pairs. Typically one side of the veth pair will connect to a bridge and the other side to another bridge or simply left as a usable interface. In this example we will create some veth pairs, connect them to bridges and test connectivity. This example is using regular Linux server and not an OpenStack node: Creating a veth pair, note that we define names for both ends: # ip link add veth0 type veth peer name veth1 # ifconfig -a . . veth0     Link encap:Ethernet HWaddr 5E:2C:E6:03:D0:17           BROADCAST MULTICAST  MTU:1500 Metric:1           RX packets:0 errors:0 dropped:0 overruns:0 frame:0           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000           RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b) veth1     Link encap:Ethernet HWaddr E6:B6:E2:6D:42:B8           BROADCAST MULTICAST  MTU:1500 Metric:1           RX packets:0 errors:0 dropped:0 overruns:0 frame:0           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000           RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b) . . To make the example more meaningful this we will create the following setup: veth0 => veth1 => br-eth3 => eth3 ======> eth2 on another Linux server br-eth3 – a regular Linux bridge which will be connected to veth1 and eth3 eth3 – a physical interface with no IP on it, connected to a private network eth2 – a physical interface on the remote Linux box connected to the private network and configured with the IP of 50.50.50.1 Once we create the setup we will ping 50.50.50.1 (the remote IP) through veth0 to test that the connection is up: # brctl addbr br-eth3 # brctl addif br-eth3 eth3 # brctl addif br-eth3 veth1 # brctl show bridge name     bridge id               STP enabled     interfaces br-eth3         8000.00505682e7f6       no              eth3                                                         veth1 # ifconfig veth0 50.50.50.50 # ping -I veth0 50.50.50.51 PING 50.50.50.51 (50.50.50.51) from 50.50.50.50 veth0: 56(84) bytes of data. 64 bytes from 50.50.50.51: icmp_seq=1 ttl=64 time=0.454 ms 64 bytes from 50.50.50.51: icmp_seq=2 ttl=64 time=0.298 ms When the naming is not as obvious as the previous example and we don't know who are the paired veth interfaces we can use the ethtool command to figure this out. The ethtool command returns an index we can look up using ip link command, for example: # ethtool -S veth1 NIC statistics: peer_ifindex: 12 # ip link . . 12: veth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 Summary That’s all for now, we quickly reviewed OVS, network namespaces, Linux bridges and veth pairs. These components are heavily used in the OpenStack network architecture we are exploring and understanding them well will be very useful when reviewing the different use cases. In the next post we will look at how the OpenStack network is laid out connecting the virtual machines to each other and to the external world. @RonenKofman

    Read the article

  • An Honest look at SharePoint Web Services

    - by juanlarios
    INTRODUCTION If you are a SharePoint developer you know that there are two basic ways to develop against SharePoint. 1) The object Model 2) Web services. SharePoint object model has the advantage of being quite rich. Anything you can do through the SharePoint UI as an administrator or end user, you can do through the object model. In fact everything that is done through the UI is done through the object model behind the scenes. The major disadvantage to getting at SharePoint this way is that the code needs to run on the server. This means that all web parts, event receivers, features, etc… all of this is code that is deployed to the server. The second way to get to SharePoint is through the built in web services. There are many articles on how to manipulate web services, how to authenticate to them and interact with them. The basic idea is that a remote application or process can contact SharePoint through a web service. Lots has been written about how great these web services are. This article is written to document the limitations, some of the issues and frustrations with working with SharePoint built in web services. Ultimately, for the tasks I was given to , SharePoint built in web services did not suffice. My evaluation of SharePoint built in services was compared against creating my own WCF Services to do what I needed. The current project I'm working on right now involved several "integration points". A remote application, installed on a separate server was to contact SharePoint and perform an task or operation. So I decided to start up Visual Studio and built a DLL and basically have 2 layers of logic. An integration layer and a data layer. A good friend of mine pointed me to SOLID principles and referred me to some videos and tutorials about it. I decided to implement the methodology (although a lot of the principles are common sense and I already incorporated in my coding practices). I was to deliver this dll to the application team and they would simply call the methods exposed by this dll and voila! it would do some task or operation in SharePoint. SOLUTION My integration layer implemented an interface that defined some of the basic integration tasks that I was to put together. My data layer was about the same, it implemented an interface with some of the tasks that I was going to develop. This gave me the opportunity to develop different data layers, ultimately different ways to get at SharePoint if I needed to. This is a classic SOLID principle. In this case it proved to be quite helpful because I wrote one data layer completely implementing SharePoint built in Web Services and another implementing my own WCF Service that I wrote. I should mention there is another layer underneath the data layer. In referencing SharePoint or WCF services in my visual studio project I created a class for every web service call. So for example, if I used List.asx. I created a class called "DocumentRetreival" this class would do the grunt work to connect to the correct URL, It would perform the basic operation of contacting the service and so on. If I used a view.asmx, I implemented a class called "ViewRetrieval" with the same idea as the last class but it would now interact with all he operations in view.asmx. This gave my data layer the ability to perform multiple calls without really worrying about some of the grunt work each class performs. This again, is a classic SOLID principle. So, in order to compare them side by side we can look at both data layers and with is involved in each. Lets take a look at the "Create Project" task or operation. The integration point is described as , "dll is to provide a way to create a project in SharePoint". Projects , in this case are basically document libraries. I am to implement a way in which a remote application can create a document library in SharePoint. Easy enough right? Use the list.asmx Web service in SharePoint. So here we go! Lets take a look at the code. I added the List.asmx web service reference to my project and this is the class that contacts it:  class DocumentRetrieval     {         private ListsSoapClient _service;      d   private bool _impersonation;         public DocumentRetrieval(bool impersonation, string endpt)         {             _service = new ListsSoapClient();             this.SetEndPoint(string.Format("{0}/{1}", endpt, ConfigurationManager.AppSettings["List"]));             _impersonation = impersonation;             if (_impersonation)             {                 _service.ClientCredentials.Windows.ClientCredential.Password = ConfigurationManager.AppSettings["password"];                 _service.ClientCredentials.Windows.ClientCredential.UserName = ConfigurationManager.AppSettings["username"];                 _service.ClientCredentials.Windows.AllowedImpersonationLevel =                     System.Security.Principal.TokenImpersonationLevel.Impersonation;             }     private void SetEndPoint(string p)          {             _service.Endpoint.Address = new EndpointAddress(p);          }          /// <summary>         /// Creates a document library with specific name and templateID         /// </summary>         /// <param name="listName">New list name</param>         /// <param name="templateID">Template ID</param>         /// <returns></returns>         public XmlElement CreateLibrary(string listName, int templateID, ref ExceptionContract exContract)         {             XmlDocument sample = new XmlDocument();             XmlElement viewCol = sample.CreateElement("Empty");             try             {                 _service.Open();                 viewCol = _service.AddList(listName, "", templateID);             }             catch (Exception ex)             {                 exContract = new ExceptionContract("DocumentRetrieval/CreateLibrary", ex.GetType(), "Connection Error", ex.StackTrace, ExceptionContract.ExceptionCode.error);                             }finally             {                 _service.Close();             }                                      return viewCol;         } } There was a lot more in this class (that I am not including) because i was reusing the grunt work and making other operations with LIst.asmx, For example, updating content types, changing or configuring lists or document libraries. One of the first things I noticed about working with the built in services is that you are really at the mercy of what is available to you. Before creating a document library (Project) I wanted to expose a IsProjectExisting method. This way the integration or data layer could recognize if a library already exists. Well there is no service call or method available to do that check. So this is what I wrote:   public bool DocLibExists(string listName, ref ExceptionContract exContract)         {             try             {                 var allLists = _service.GetListCollection();                                return allLists.ChildNodes.OfType<XmlElement>().ToList().Exists(x => x.Attributes["Title"].Value ==listName);             }             catch (Exception ex)             {                 exContract = new ExceptionContract("DocumentRetrieval/GetList/GetListWSCall", ex.GetType(), "Unable to Retrieve List Collection", ex.StackTrace, ExceptionContract.ExceptionCode.error);             }             return false;         } This really just gets an XMLElement with all the lists. It was then up to me to sift through the clutter and noise and see if Document library already existed. This took a little bit of getting used to. Now instead of working with code, you are working with XMLElement response format from web service. I wrote a LINQ query to go through and find if the attribute "Title" existed and had a value of the listname then it would return True, if not False. I didn't particularly like working this way. Dealing with XMLElement responses and then having to manipulate it to get at the exact data I was looking for. Once the check for the DocLibExists, was done, I would either create the document library or send back an error indicating the document library already existed. Now lets examine the code that actually creates the document library. It does what you are really after, it creates a document library. Notice how the template ID is really an integer. Every document library template in SharePoint has an ID associated with it. Document libraries, Image Library, Custom List, Project Tasks, etc… they all he a unique integer associated with it. Well, that's great but the client came back to me and gave me some specifics that each "project" or document library, should have. They specified they had 3 types of projects. Each project would have unique views, about 10 views for each project. Each Project specified unique configurations (auditing, versioning, content types, etc…) So what turned out to be a simple implementation of creating a document library as a repository for a project, turned out to be quite involved.  The first thing I thought of was to create a template for document library. There are other ways you can do this too. Using the web Service call, you could configure views, versioning, even content types, etc… the only catch is, you have to be working quite extensively with CAML. I am not fond of CAML. I can do it and work with it, I just don't like doing it. It is quite touchy and at times it is quite tough to understand where errors were made with CAML statements. Working with Web Services and CAML proved to be quite annoying. The service call would return a generic error message that did not particularly point me to a CAML statement syntax error, or even a CAML error. I was not sure if it was a security , performance or code based issue. It was quite tough to work with. At times it was difficult to work with because of the way SharePoint handles metadata. There are "Names", "Display Name", and "StaticName" fields. It was quite tough to understand at times, which one to use. So it took a lot of trial and error. There are tools that can help with CAML generation. There is also now intellisense for CAML statements in Visual Studio that might help but ultimately I'm not fond of CAML with Web Services.   So I decided on the template. So my plan was to create create a document library, configure it accordingly and then use The Template Builder that comes with the SharePoint SDK. This tool allows you to create site templates, list template etc… It is quite interesting because it does not generate an STP file, it actually generates an xml definition and a feature you can activate and make that template available on a site or site collection. The first issue I experienced with this is that one of the specifications to this template was that the "All Documents" view was to have 2 web parts on it. Well, it turns out that using the template builder , it did not include the web parts as part of the list template definition it generated. It backed up the settings, the views, the content types but not the custom web parts. I still decided to try this even without the web parts on the page. This new template defined a new Document library definition with a unique ID. The problem was that the service call accepts an int but it only has access to the built in library int definitions. Any new ones added or created will not be available to create. So this made it impossible for me to approach the problem this way.     I should also mention that one of the nice features about SharePoint is the ability to create list templates, back them up and then create lists based on that template. It can all be done by end user administrators. These templates are quite unique because they are saved as an STP file and not an xml definition. I also went this route and tried to see if there was another service call where I could create a document library based no given template name. Nope! none.      After some thinking I decide to implement a WCF service to do this creation for me. I was quite certain that the object model would allow me to create document libraries base on a template in which an ID was required and also templates saved as STP files. Now I don't want to bother with posting the code to contact WCF service because it's self explanatory, but I will post the code that I used to create a list with custom template. public ServiceResult CreateProject(string name, string templateName, string projectId)         {             string siteurl = SPContext.Current.Site.Url;             Guid webguid = SPContext.Current.Web.ID;                        using (SPSite site = new SPSite(siteurl))             {                 using (SPWeb rootweb = site.RootWeb)                 {                     SPListTemplateCollection temps = site.GetCustomListTemplates(rootweb);                     ProcessWeb(siteurl, webguid, web => Act_CreateProject(web, name, templateName, projectId, temps));                 }//SpWeb             }//SPSite              return _globalResult;                   }         private void Act_CreateProject(SPWeb targetsite, string name, string templateName, string projectId, SPListTemplateCollection temps) {                         var temp = temps.Cast<SPListTemplate>().FirstOrDefault(x => x.Name.Equals(templateName));             if (temp != null)             {                             try                 {                                         Guid listGuid = targetsite.Lists.Add(name, "", temp);                     SPList newList = targetsite.Lists[listGuid];                     _globalResult = new ServiceResult(true, "Success", "Success");                 }                 catch (Exception ex)                 {                     _globalResult = new ServiceResult(false, (string.IsNullOrEmpty(ex.Message) ? "None" : ex.Message + " " + templateName), ex.StackTrace.ToString());                 }                                       }        private void ProcessWeb(string siteurl, Guid webguid, Action<SPWeb> action) {                        using (SPSite sitecollection = new SPSite(siteurl)) {                 using (SPWeb web = sitecollection.AllWebs[webguid]) {                     action(web);                 }                     }                  } This code is actually some of the code I implemented for the service. there was a lot more I did on Project Creation which I will cover in my next blog post. I implemented an ACTION method to process the web. This allowed me to properly dispose the SPWEb and SPSite objects and not rewrite this code over and over again. So I implemented a WCF service to create projects for me, this allowed me to do a lot more than just create a document library with a template, it now gave me the flexibility to do just about anything the client wanted at project creation. Once this was implemented , the client came back to me and said, "we reference all our projects with ID's in our application. we want SharePoint to do the same". This has been something I have been doing for a little while now but I do hope that SharePoint 2010 can have more of an answer to this and address it properly. I have been adding metadata to SPWebs through property bag. I believe I have blogged about it before. This time it required metadata added to a document library. No problem!!! I also mentioned these web parts that were to go on the "All Documents" View. I took the opportunity to configure them to the appropriate settings. There were two settings that needed to be set on these web parts. One of them was a Project ID configured in the webpart properties. The following code enhances and replaces the "Act_CreateProject " method above:  private void Act_CreateProject(SPWeb targetsite, string name, string templateName, string projectId, SPListTemplateCollection temps) {                         var temp = temps.Cast<SPListTemplate>().FirstOrDefault(x => x.Name.Equals(templateName));             if (temp != null)             {                 SPLimitedWebPartManager wpmgr = null;                               try                 {                                         Guid listGuid = targetsite.Lists.Add(name, "", temp);                     SPList newList = targetsite.Lists[listGuid];                     SPFolder rootFolder = newList.RootFolder;                     rootFolder.Properties.Add(KEY, projectId);                     rootFolder.Update();                     if (rootFolder.ParentWeb != targetsite)                         rootFolder.ParentWeb.Dispose();                     if (!templateName.Contains("Natural"))                     {                         SPView alldocumentsview = newList.Views.Cast<SPView>().FirstOrDefault(x => x.Title.Equals(ALLDOCUMENTS));                         SPFile alldocfile = targetsite.GetFile(alldocumentsview.ServerRelativeUrl);                         wpmgr = alldocfile.GetLimitedWebPartManager(PersonalizationScope.Shared);                         ConfigureWebPart(wpmgr, projectId, CUSTOMWPNAME);                                              alldocfile.Update();                     }                                        if (newList.ParentWeb != targetsite)                         newList.ParentWeb.Dispose();                     _globalResult = new ServiceResult(true, "Success", "Success");                 }                 catch (Exception ex)                 {                     _globalResult = new ServiceResult(false, (string.IsNullOrEmpty(ex.Message) ? "None" : ex.Message + " " + templateName), ex.StackTrace.ToString());                 }                 finally                 {                     if (wpmgr != null)                     {                         wpmgr.Web.Dispose();                         wpmgr.Dispose();                     }                 }             }                         }       private void ConfigureWebPart(SPLimitedWebPartManager mgr, string prjId, string webpartname)         {             var wp = mgr.WebParts.Cast<System.Web.UI.WebControls.WebParts.WebPart>().FirstOrDefault(x => x.DisplayTitle.Equals(webpartname));             if (wp != null)             {                           (wp as ListRelationshipWebPart.ListRelationshipWebPart).ProjectID = prjId;                 mgr.SaveChanges(wp);             }         }   This Shows you how I was able to set metadata on the document library. It has to be added to the RootFolder of the document library, Unfortunately, the SPList does not have a Property bag that I can add a key\value pair to. It has to be done on the root folder. Now everything in the integration will reference projects by ID's and will not care about names. My, "DocLibExists" will now need to be changed because a web service is not set up to look at property bags.  I had to write another method on the Service to do the equivalent but with ID's instead of names.  The second thing you will notice about the code is the use of the Webpartmanager. I have seen several examples online, and also read a lot about memory leaks, The above code does not produce memory leaks. The web part manager creates an SPWeb, so just dispose it like I did. CONCLUSION This is a long long post so I will stop here for now, I will continue with more comparisons and limitations in my next post. My conclusion for this example is that Web Services will do the trick if you can suffer through CAML and if you are doing some simple operations. For Everything else, there's WCF! **** fireI apologize for the disorganization of this post, I was on a bus on a 12 hour trip to IOWA while I wrote it, I was half asleep and half awake, hopefully it makes enough sense to someone.

    Read the article

  • WLS MBeans

    - by Jani Rautiainen
    WLS provides a set of Managed Beans (MBeans) to configure, monitor and manage WLS resources. We can use the WLS MBeans to automate some of the tasks related to the configuration and maintenance of the WLS instance. The MBeans can be accessed a number of ways; using various UIs and programmatically using Java or WLST Python scripts.For customization development we can use the features to e.g. manage the deployed customization in MDS, control logging levels, automate deployment of dependent libraries etc. This article is an introduction on how to access and use the WLS MBeans. The goal is to illustrate the various access methods in a single article; the details of the features are left to the linked documentation.This article covers Windows based environment, steps for Linux would be similar however there would be some differences e.g. on how the file paths are defined. MBeansThe WLS MBeans can be categorized to runtime and configuration MBeans.The Runtime MBeans can be used to access the runtime information about the server and its resources. The data from runtime beans is only available while the server is running. The runtime beans can be used to e.g. check the state of the server or deployment.The Configuration MBeans contain information about the configuration of servers and resources. The configuration of the domain is stored in the config.xml file and the configuration MBeans can be used to access and modify the configuration data. For more information on the WLS MBeans refer to: Understanding WebLogic Server MBeans WLS MBean reference Java Management Extensions (JMX)We can use JMX APIs to access the WLS MBeans. This allows us to create Java programs to configure, monitor, and manage WLS resources. In order to use the WLS MBeans we need to add the following library into the class-path: WL_HOME\lib\wljmxclient.jar Connecting to a WLS MBean server The WLS MBeans are contained in a Mbean server, depending on the requirement we can connect to (MBean Server / JNDI Name): Domain Runtime MBean Server weblogic.management.mbeanservers.domainruntime Runtime MBean Server weblogic.management.mbeanservers.runtime Edit MBean Server weblogic.management.mbeanservers.edit To connect to the WLS MBean server first we need to create a map containing the credentials; Hashtable<String, String> param = new Hashtable<String, String>(); param.put(Context.SECURITY_PRINCIPAL, "weblogic");        param.put(Context.SECURITY_CREDENTIALS, "weblogic1");        param.put(JMXConnectorFactory.PROTOCOL_PROVIDER_PACKAGES, "weblogic.management.remote"); These define the user, password and package containing the protocol. Next we create the connection: JMXServiceURL serviceURL =     new JMXServiceURL("t3","127.0.0.1",7101,     "/jndi/weblogic.management.mbeanservers.domainruntime"); JMXConnector connector = JMXConnectorFactory.connect(serviceURL, param); MBeanServerConnection connection = connector.getMBeanServerConnection(); With the connection we can now access the MBeans for the WLS instance. For a complete example see Appendix A of this post. For more details refer to Accessing WebLogic Server MBeans with JMX Accessing WLS MBeans The WLS MBeans are structured hierarchically; in order to access content we need to know the path to the MBean we are interested in. The MBean is accessed using “MBeanServerConnection. getAttribute” API.  WLS provides entry points to the hierarchy allowing us to navigate all the WLS MBeans in the hierarchy (MBean Server / JMX object name): Domain Runtime MBean Server com.bea:Name=DomainRuntimeService,Type=weblogic.management.mbeanservers.domainruntime.DomainRuntimeServiceMBean Runtime MBean Servers com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean Edit MBean Server com.bea:Name=EditService,Type=weblogic.management.mbeanservers.edit.EditServiceMBean For example we can access the Domain Runtime MBean using: ObjectName service = new ObjectName( "com.bea:Name=DomainRuntimeService," + "Type=weblogic.management.mbeanservers.domainruntime.DomainRuntimeServiceMBean"); Same syntax works for any “child” WLS MBeans e.g. to find out all application deployments we can: ObjectName domainConfig = (ObjectName)connection.getAttribute(service,"DomainConfiguration"); ObjectName[] appDeployments = (ObjectName[])connection.getAttribute(domainConfig,"AppDeployments"); Alternatively we could access the same MBean using the full syntax: ObjectName domainConfig = new ObjectName("com.bea:Location=DefaultDomain,Name=DefaultDomain,Type=Domain"); ObjectName[] appDeployments = (ObjectName[])connection.getAttribute(domainConfig,"AppDeployments"); For more details refer to Accessing WebLogic Server MBeans with JMX Invoking operations on WLS MBeans The WLS MBean operations can be invoked with MBeanServerConnection. invoke API; in the following example we query the state of “AppsLoggerService” application: ObjectName appRuntimeStateRuntime = new ObjectName("com.bea:Name=AppRuntimeStateRuntime,Type=AppRuntimeStateRuntime"); Object[] parameters = { "AppsLoggerService", "DefaultServer" }; String[] signature = { "java.lang.String", "java.lang.String" }; String result = (String)connection.invoke(appRuntimeStateRuntime,"getCurrentState",parameters, signature); The result returned should be "STATE_ACTIVE" assuming the "AppsLoggerService" application is up and running. WebLogic Scripting Tool (WLST) The WebLogic Scripting Tool (WLST) is a command-line scripting environment that we can access the same WLS MBeans. The tool is located under: $MW_HOME\oracle_common\common\bin\wlst.bat Do note that there are several instances of the wlst script under the $MW_HOME, each of them works, however the commands available vary, so we want to use the one under “oracle_common”. The tool is started in offline mode. In offline mode we can access and manipulate the domain configuration. In online mode we can access the runtime information. We connect to the Administration Server : connect("weblogic","weblogic1", "t3://127.0.0.1:7101") In both online and offline modes we can navigate the WLS MBean using commands like "ls" to print content and "cd" to navigate between objects, for example: All the commands available can be obtained with: help('all') For details of the tool refer to WebLogic Scripting Tool and for the commands available WLST Command and Variable Reference. Also do note that the WLST tool can be invoked from Java code in Embedded Mode. Running Scripts The WLST tool allows us to automate tasks using Python scripts in Script Mode. The script can be manually created or recorded by the WLST tool. Example commands of recording a script: startRecording("c:/temp/recording.py") <commands that we want to record> stopRecording() We can run the script from WLST: execfile("c:/temp/recording.py") We can also run the script from the command line: C:\apps\Oracle\Middleware\oracle_common\common\bin\wlst.cmd c:/temp/recording.py There are various sample scripts are provided with the WLS instance. UI to Access the WLS MBeans There are various UIs through which we can access the WLS MBeans. Oracle Enterprise Manager Fusion Middleware Control Oracle WebLogic Server Administration Console Fusion Middleware Control MBean Browser In the integrated JDeveloper environment only the Oracle WebLogic Server Administration Console is available to us. For more information refer to the documentation, one noteworthy feature in the console is the ability to record WLST scripts based on the navigation. In addition to the UIs above the JConsole included in the JDK can be used to access the WLS MBeans. The JConsole needs to be started with specific parameter to force WLS objects to be used and jar files in the classpath: "C:\apps\Oracle\Middleware\jdk160_24\bin\jconsole" -J-Djava.class.path=C:\apps\Oracle\Middleware\jdk160_24\lib\jconsole.jar;C:\apps\Oracle\Middleware\jdk160_24\lib\tools.jar;C:\apps\Oracle\Middleware\wlserver_10.3\server\lib\wljmxclient.jar -J-Djmx.remote.protocol.provider.pkgs=weblogic.management.remote For more details refer to the Accessing Custom MBeans from JConsole. Summary In this article we have covered various ways we can access and use the WLS MBeans in context of integrated WLS in JDeveloper to be used for Fusion Application customization development. References Developing Custom Management Utilities With JMX for Oracle WebLogic Server Accessing WebLogic Server MBeans with JMX WebLogic Server MBean Reference WebLogic Scripting Tool WLST Command and Variable Reference Appendix A package oracle.apps.test; import java.io.IOException;import java.net.MalformedURLException;import java.util.Hashtable;import javax.management.MBeanServerConnection;import javax.management.MalformedObjectNameException;import javax.management.ObjectName;import javax.management.remote.JMXConnector;import javax.management.remote.JMXConnectorFactory;import javax.management.remote.JMXServiceURL;import javax.naming.Context;/** * This class contains simple examples on how to access WLS MBeans using JMX. */public class BlogExample {    /**     * Connection to the WLS MBeans     */    private MBeanServerConnection connection;    /**     * Constructor that takes in the connection information for the      * domain and obtains the resources from WLS MBeans using JMX.     * @param hostName host name to connect to for the WLS server     * @param port port to connect to for the WLS server     * @param userName user name to connect to for the WLS server     * @param password password to connect to for the WLS server     */    public BlogExample(String hostName, String port, String userName,                       String password) {        super();        try {            initConnection(hostName, port, userName, password);        } catch (Exception e) {            throw new RuntimeException("Unable to connect to the domain " +                                       hostName + ":" + port);        }    }    /**     * Default constructor.     * Tries to create connection with default values. Runtime exception will be     * thrown if the default values are not used in the local instance.     */    public BlogExample() {        this("127.0.0.1", "7101", "weblogic", "weblogic1");    }    /**     * Initializes the JMX connection to the WLS Beans     * @param hostName host name to connect to for the WLS server     * @param port port to connect to for the WLS server     * @param userName user name to connect to for the WLS server     * @param password password to connect to for the WLS server     * @throws IOException error connecting to the WLS MBeans     * @throws MalformedURLException error connecting to the WLS MBeans     * @throws MalformedObjectNameException error connecting to the WLS MBeans     */    private void initConnection(String hostName, String port, String userName,                                String password)                                 throws IOException, MalformedURLException,                                        MalformedObjectNameException {        String protocol = "t3";        String jndiroot = "/jndi/";        String mserver = "weblogic.management.mbeanservers.domainruntime";        JMXServiceURL serviceURL =            new JMXServiceURL(protocol, hostName, Integer.valueOf(port),                              jndiroot + mserver);        Hashtable<String, String> h = new Hashtable<String, String>();        h.put(Context.SECURITY_PRINCIPAL, userName);        h.put(Context.SECURITY_CREDENTIALS, password);        h.put(JMXConnectorFactory.PROTOCOL_PROVIDER_PACKAGES,              "weblogic.management.remote");        JMXConnector connector = JMXConnectorFactory.connect(serviceURL, h);        connection = connector.getMBeanServerConnection();    }    /**     * Main method used to invoke the logic for testing     * @param args arguments passed to the program     */    public static void main(String[] args) {        BlogExample blogExample = new BlogExample();        blogExample.testEntryPoint();        blogExample.testDirectAccess();        blogExample.testInvokeOperation();    }    /**     * Example of using an entry point to navigate the WLS MBean hierarchy.     */    public void testEntryPoint() {        try {            System.out.println("testEntryPoint");            ObjectName service =             new ObjectName("com.bea:Name=DomainRuntimeService,Type=" +"weblogic.management.mbeanservers.domainruntime.DomainRuntimeServiceMBean");            ObjectName domainConfig =                (ObjectName)connection.getAttribute(service,                                                    "DomainConfiguration");            ObjectName[] appDeployments =                (ObjectName[])connection.getAttribute(domainConfig,                                                      "AppDeployments");            for (ObjectName appDeployment : appDeployments) {                String resourceIdentifier =                    (String)connection.getAttribute(appDeployment,                                                    "SourcePath");                System.out.println(resourceIdentifier);            }        } catch (Exception e) {            throw new RuntimeException(e);        }    }    /**     * Example of accessing WLS MBean directly with a full reference.     * This does the same thing as testEntryPoint in slightly difference way.     */    public void testDirectAccess() {        try {            System.out.println("testDirectAccess");            ObjectName appDeployment =                new ObjectName("com.bea:Location=DefaultDomain,"+                               "Name=AppsLoggerService,Type=AppDeployment");            String resourceIdentifier =                (String)connection.getAttribute(appDeployment, "SourcePath");            System.out.println(resourceIdentifier);        } catch (Exception e) {            throw new RuntimeException(e);        }    }    /**     * Example of invoking operation on a WLS MBean.     */    public void testInvokeOperation() {        try {            System.out.println("testInvokeOperation");            ObjectName appRuntimeStateRuntime =                new ObjectName("com.bea:Name=AppRuntimeStateRuntime,"+                               "Type=AppRuntimeStateRuntime");            String identifier = "AppsLoggerService";            String serverName = "DefaultServer";            Object[] parameters = { identifier, serverName };            String[] signature = { "java.lang.String", "java.lang.String" };            String result =                (String)connection.invoke(appRuntimeStateRuntime, "getCurrentState",                                          parameters, signature);            System.out.println("State of " + identifier + " = " + result);        } catch (Exception e) {            throw new RuntimeException(e);        }    }}

    Read the article

  • Grandparent – Parent – Child Reports in SQL Developer

    - by thatjeffsmith
    You’ll never see one of these family stickers on my car, but I promise not to judge…much. Parent – Child reports are pretty straightforward in Oracle SQL Developer. You have a ‘parent’ report, and then one or more ‘child’ reports which are based off of a value in a selected row or value from the parent. If you need a quick tutorial to get up to speed on the subject, go ahead and take 5 minutes Shortly before I left for vacation 2 weeks agao, I got an interesting question from one of my Twitter Followers: @thatjeffsmith any luck with the #Oracle awr reports in #SQLDeveloper?This is easy with multi generation parent>child Done in #dbvisualizer — Ronald Rood (@Ik_zelf) August 26, 2012 Now that I’m back from vacation, I can tell Ronald and everyone else that the answer is ‘Yes!’ And here’s how Time to Get Out Your XML Editor Don’t have one? That’s OK, SQL Developer can edit XML files. While the Reporting interface doesn’t surface the ability to create multi-generational reports, the underlying code definitely supports it. We just need to hack away at the XML that powers a report. For this example I’m going to start simple. A query that brings back DEPARTMENTs, then EMPLOYEES, then JOBs. We can build the first two parts of the report using the report editor. A Parent-Child report in Oracle SQL Developer (Departments – Employees) Save the Report to XML Once you’ve generated the XML file, open it with your favorite XML editor. For this example I’ll be using the build-it XML editor in SQL Developer. SQL Developer Reports in their raw XML glory! Right after the PDF element in the XML document, we can start a new ‘child’ report by inserting a DISPLAY element. I just copied and pasted the existing ‘display’ down so I wouldn’t have to worry about screwing anything up. Note I also needed to change the ‘master’ name so it wouldn’t confuse SQL Developer when I try to import/open a report that has the same name. Also I needed to update the binds tags to reflect the names from the child versus the original parent report. This is pretty easy to figure out on your own actually – I mean I’m no real developer and I got it pretty quick. <?xml version="1.0" encoding="UTF-8" ?> <displays> <display id="92857fce-0139-1000-8006-7f0000015340" type="" style="Table" enable="true"> <name><![CDATA[Grandparent]]></name> <description><![CDATA[]]></description> <tooltip><![CDATA[]]></tooltip> <drillclass><![CDATA[null]]></drillclass> <CustomValues> <TYPE>horizontal</TYPE> </CustomValues> <query> <sql><![CDATA[select * from hr.departments]]></sql> </query> <pdf version="VERSION_1_7" compression="CONTENT"> <docproperty title="" author="" subject="" keywords="" /> <cell toppadding="2" bottompadding="2" leftpadding="2" rightpadding="2" horizontalalign="LEFT" verticalalign="TOP" wrap="true" /> <column> <heading font="Courier" size="10" style="NORMAL" color="-16777216" rowshading="-1" labeling="FIRST_PAGE" /> <footing font="Courier" size="10" style="NORMAL" color="-16777216" rowshading="-1" labeling="NONE" /> <blob blob="NONE" zip="false" /> </column> <table font="Courier" size="10" style="NORMAL" color="-16777216" userowshading="false" oddrowshading="-1" evenrowshading="-1" showborders="true" spacingbefore="12" spacingafter="12" horizontalalign="LEFT" /> <header enable="false" generatedate="false"> <data> null </data> </header> <footer enable="false" generatedate="false"> <data value="null" /> </footer> <security enable="false" useopenpassword="false" openpassword="" encryption="EXCLUDE_METADATA"> <permission enable="false" permissionpassword="" allowcopying="true" allowprinting="true" allowupdating="false" allowaccessdevices="true" /> </security> <pagesetup papersize="LETTER" orientation="1" measurement="in" margintop="1.0" marginbottom="1.0" marginleft="1.0" marginright="1.0" /> </pdf> <display id="null" type="" style="Table" enable="true"> <name><![CDATA[Parent]]></name> <description><![CDATA[]]></description> <tooltip><![CDATA[]]></tooltip> <drillclass><![CDATA[null]]></drillclass> <CustomValues> <TYPE>horizontal</TYPE> </CustomValues> <query> <sql><![CDATA[select * from hr.employees where department_id = EPARTMENT_ID]]></sql> <binds> <bind id="DEPARTMENT_ID"> <prompt><![CDATA[DEPARTMENT_ID]]></prompt> <tooltip><![CDATA[DEPARTMENT_ID]]></tooltip> <value><![CDATA[NULL_VALUE]]></value> </bind> </binds> </query> <pdf version="VERSION_1_7" compression="CONTENT"> <docproperty title="" author="" subject="" keywords="" /> <cell toppadding="2" bottompadding="2" leftpadding="2" rightpadding="2" horizontalalign="LEFT" verticalalign="TOP" wrap="true" /> <column> <heading font="Courier" size="10" style="NORMAL" color="-16777216" rowshading="-1" labeling="FIRST_PAGE" /> <footing font="Courier" size="10" style="NORMAL" color="-16777216" rowshading="-1" labeling="NONE" /> <blob blob="NONE" zip="false" /> </column> <table font="Courier" size="10" style="NORMAL" color="-16777216" userowshading="false" oddrowshading="-1" evenrowshading="-1" showborders="true" spacingbefore="12" spacingafter="12" horizontalalign="LEFT" /> <header enable="false" generatedate="false"> <data> null </data> </header> <footer enable="false" generatedate="false"> <data value="null" /> </footer> <security enable="false" useopenpassword="false" openpassword="" encryption="EXCLUDE_METADATA"> <permission enable="false" permissionpassword="" allowcopying="true" allowprinting="true" allowupdating="false" allowaccessdevices="true" /> </security> <pagesetup papersize="LETTER" orientation="1" measurement="in" margintop="1.0" marginbottom="1.0" marginleft="1.0" marginright="1.0" /> </pdf> <display id="null" type="" style="Table" enable="true"> <name><![CDATA[Child]]></name> <description><![CDATA[]]></description> <tooltip><![CDATA[]]></tooltip> <drillclass><![CDATA[null]]></drillclass> <CustomValues> <TYPE>horizontal</TYPE> </CustomValues> <query> <sql><![CDATA[select * from hr.jobs where job_id = :JOB_ID]]></sql> <binds> <bind id="JOB_ID"> <prompt><![CDATA[JOB_ID]]></prompt> <tooltip><![CDATA[JOB_ID]]></tooltip> <value><![CDATA[NULL_VALUE]]></value> </bind> </binds> </query> <pdf version="VERSION_1_7" compression="CONTENT"> <docproperty title="" author="" subject="" keywords="" /> <cell toppadding="2" bottompadding="2" leftpadding="2" rightpadding="2" horizontalalign="LEFT" verticalalign="TOP" wrap="true" /> <column> <heading font="Courier" size="10" style="NORMAL" color="-16777216" rowshading="-1" labeling="FIRST_PAGE" /> <footing font="Courier" size="10" style="NORMAL" color="-16777216" rowshading="-1" labeling="NONE" /> <blob blob="NONE" zip="false" /> </column> <table font="Courier" size="10" style="NORMAL" color="-16777216" userowshading="false" oddrowshading="-1" evenrowshading="-1" showborders="true" spacingbefore="12" spacingafter="12" horizontalalign="LEFT" /> <header enable="false" generatedate="false"> <data> null </data> </header> <footer enable="false" generatedate="false"> <data value="null" /> </footer> <security enable="false" useopenpassword="false" openpassword="" encryption="EXCLUDE_METADATA"> <permission enable="false" permissionpassword="" allowcopying="true" allowprinting="true" allowupdating="false" allowaccessdevices="true" /> </security> <pagesetup papersize="LETTER" orientation="1" measurement="in" margintop="1.0" marginbottom="1.0" marginleft="1.0" marginright="1.0" /> </pdf> </display> </display> </display> </displays> Save the file and ‘Open Report…’ You’ll see your new report name in the tree. You just need to double-click it to open it. Here’s what it looks like running A 3 generation family Now Let’s Build an AWR Text Report Ronald wanted to have the ability to query AWR snapshots and generate the AWR reports. That requires a few inputs, including a START and STOP snapshot ID. That basically tells AWR what time period to use for generating the report. And here’s where it gets tricky. We’ll need to use aliases for the SNAP_ID column. Since we’re using the same column name from 2 different queries, we need to use different bind variables. Fortunately for us, SQL Developer’s clever enough to use the column alias as the BIND. Here’s what I mean: Grandparent Query SELECT snap_id start1, begin_interval_time, end_interval_time FROM dba_hist_snapshot ORDER BY 1 asc Parent Query SELECT snap_id stop1, begin_interval_time, end_interval_time, :START1 carry FROM dba_hist_snapshot WHERE snap_id > :START1 ORDER BY 1 asc And here’s where it gets even trickier – you can’t reference a bind from outside the parent query. My grandchild report can’t reference a value from the grandparent report. So I just carry the selected value down to the parent. In my parent query SELECT you see the ‘:START1′ at the end? That’s making that value available to me when I use it in my grandchild query. To complicate things a bit further, I can’t have a column name with a ‘:’ in it, or SQL Developer will get confused when I try to reference the value of the variable with the ‘:’ – and ‘::Name’ doesn’t work. But that’s OK, just alias it. Grandchild Query Select Output From Table(Dbms_Workload_Repository.Awr_Report_Text(1298953802, 1,:CARRY, :STOP1)); Ok, and the last trick – I hard-coded my report to use my database’s DB_ID and INST_ID into the AWR package call. Now a smart person could figure out a way to make that work on any database, but I got lazy and and ran out of time. But this should be far enough for you to take it from here. Here’s what my report looks like now: Caution: don’t run this if you haven’t licensed Enterprise Edition with Diagnostic Pack. The Raw XML for this AWR Report <?xml version="1.0" encoding="UTF-8" ?> <displays> <display id="927ba96c-0139-1000-8001-7f0000015340" type="" style="Table" enable="true"> <name><![CDATA[AWR Start Stop Report Final]]></name> <description><![CDATA[]]></description> <tooltip><![CDATA[]]></tooltip> <drillclass><![CDATA[null]]></drillclass> <CustomValues> <TYPE>horizontal</TYPE> </CustomValues> <query> <sql><![CDATA[SELECT snap_id start1, begin_interval_time, end_interval_time FROM dba_hist_snapshot ORDER BY 1 asc]]></sql> </query> <display id="null" type="" style="Table" enable="true"> <name><![CDATA[Stop SNAP_ID]]></name> <description><![CDATA[]]></description> <tooltip><![CDATA[]]></tooltip> <drillclass><![CDATA[null]]></drillclass> <CustomValues> <TYPE>horizontal</TYPE> </CustomValues> <query> <sql><![CDATA[SELECT snap_id stop1, begin_interval_time, end_interval_time, :START1 carry FROM dba_hist_snapshot WHERE snap_id > :START1 ORDER BY 1 asc]]></sql> </query> <display id="null" type="" style="Table" enable="true"> <name><![CDATA[AWR Report]]></name> <description><![CDATA[]]></description> <tooltip><![CDATA[]]></tooltip> <drillclass><![CDATA[null]]></drillclass> <CustomValues> <TYPE>horizontal</TYPE> </CustomValues> <query> <sql><![CDATA[Select Output From Table(Dbms_Workload_Repository.Awr_Report_Text(1298953802, 1,:CARRY, :STOP1 ))]]></sql> </query> </display> </display> </display> </displays> Should We Build Support for Multiple Levels of Reports into the User Interface? Let us know! A comment here or a suggestion on our SQL Developer Exchange might help your case!

    Read the article

  • Global Cache CR Requested But Current Block Received

    - by Liu Maclean(???)
    ????????«MINSCN?Cache Fusion Read Consistent» ????,???????????? ??????????????????: SQL> select * from V$version; BANNER -------------------------------------------------------------------------------- Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production PL/SQL Release 11.2.0.3.0 - Production CORE 11.2.0.3.0 Production TNS for Linux: Version 11.2.0.3.0 - Production NLSRTL Version 11.2.0.3.0 - Production SQL> select count(*) from gv$instance; COUNT(*) ---------- 2 SQL> select * from global_name; GLOBAL_NAME -------------------------------------------------------------------------------- www.oracledatabase12g.com ?11gR2 2??RAC??????????status???XG,????Xcurrent block???INSTANCE 2?hold?,?????INSTANCE 1?????????,?????: SQL> select * from test; ID ---------- 1 2 SQL> select dbms_rowid.rowid_block_number(rowid),dbms_rowid.rowid_relative_fno(rowid) from test; DBMS_ROWID.ROWID_BLOCK_NUMBER(ROWID) DBMS_ROWID.ROWID_RELATIVE_FNO(ROWID) ------------------------------------ ------------------------------------ 89233 1 89233 1 SQL> alter system flush buffer_cache; System altered. INSTANCE 1 Session A: SQL> update test set id=id+1 where id=1; 1 row updated. INSTANCE 1 Session B: SQL> select state,cr_scn_bas from x$bh where file#=1 and dbablk=89233 and state!=0; STATE CR_SCN_BAS ---------- ---------- 1 0 3 1755287 SQL> oradebug setmypid; Statement processed. SQL> oradebug dump gc_elements 255; Statement processed. SQL> oradebug tracefile_name; /s01/orabase/diag/rdbms/vprod/VPROD1/trace/VPROD1_ora_19111.trc GLOBAL CACHE ELEMENT DUMP (address: 0xa4ff3080): id1: 0x15c91 id2: 0x1 pkey: OBJ#76896 block: (1/89233) lock: X rls: 0x0 acq: 0x0 latch: 3 flags: 0x20 fair: 0 recovery: 0 fpin: 'kdswh11: kdst_fetch' bscn: 0x0.146e20 bctx: (nil) write: 0 scan: 0x0 lcp: (nil) lnk: [NULL] lch: [0xa9f6a6f8,0xa9f6a6f8] seq: 32 hist: 58 145:0 118 66 144:0 192 352 197 48 121 113 424 180 58 LIST OF BUFFERS LINKED TO THIS GLOBAL CACHE ELEMENT: flg: 0x02000001 lflg: 0x1 state: XCURRENT tsn: 0 tsh: 2 addr: 0xa9f6a5c8 obj: 76896 cls: DATA bscn: 0x0.1ac898 BH (0xa9f6a5c8) file#: 1 rdba: 0x00415c91 (1/89233) class: 1 ba: 0xa9e56000 set: 5 pool: 3 bsz: 8192 bsi: 0 sflg: 3 pwc: 0,15 dbwrid: 0 obj: 76896 objn: 76896 tsn: 0 afn: 1 hint: f hash: [0x91f4e970,0xbae9d5b8] lru: [0x91f58848,0xa9f6a828] lru-flags: debug_dump obj-flags: object_ckpt_list ckptq: [0x9df6d1d8,0xa9f6a740] fileq: [0xa2ece670,0xbdf4ed68] objq: [0xb4964e00,0xb4964e00] objaq: [0xb4964de0,0xb4964de0] st: XCURRENT md: NULL fpin: 'kdswh11: kdst_fetch' tch: 2 le: 0xa4ff3080 flags: buffer_dirty redo_since_read LRBA: [0x19.5671.0] LSCN: [0x0.1ac898] HSCN: [0x0.1ac898] HSUB: [1] buffer tsn: 0 rdba: 0x00415c91 (1/89233) scn: 0x0000.001ac898 seq: 0x01 flg: 0x00 tail: 0xc8980601 frmt: 0x02 chkval: 0x0000 type: 0x06=trans data ??????block: (1/89233)?GLOBAL CACHE ELEMENT DUMP?LOCK????X ??XG , ??????Current Block????Instance??modify???,????????????? ????Instance 2 ????: Instance 2 Session C: SQL> update test set id=id+1 where id=2; 1 row updated. Instance 2 Session D: SQL> select state,cr_scn_bas from x$bh where file#=1 and dbablk=89233 and state!=0; STATE CR_SCN_BAS ---------- ---------- 1 0 3 1756658 SQL> oradebug setmypid; Statement processed. SQL> oradebug dump gc_elements 255; Statement processed. SQL> oradebug tracefile_name; /s01/orabase/diag/rdbms/vprod/VPROD2/trace/VPROD2_ora_13038.trc GLOBAL CACHE ELEMENT DUMP (address: 0x89fb25a0): id1: 0x15c91 id2: 0x1 pkey: OBJ#76896 block: (1/89233) lock: XG rls: 0x0 acq: 0x0 latch: 3 flags: 0x20 fair: 0 recovery: 0 fpin: 'kduwh01: kdusru' bscn: 0x0.1acdf3 bctx: (nil) write: 0 scan: 0x0 lcp: (nil) lnk: [NULL] lch: [0x96f4cf80,0x96f4cf80] seq: 61 hist: 324 21 143:0 19 16 352 329 144:6 14 7 352 197 LIST OF BUFFERS LINKED TO THIS GLOBAL CACHE ELEMENT: flg: 0x0a000001 state: XCURRENT tsn: 0 tsh: 1 addr: 0x96f4ce50 obj: 76896 cls: DATA bscn: 0x0.1acdf6 BH (0x96f4ce50) file#: 1 rdba: 0x00415c91 (1/89233) class: 1 ba: 0x96bd4000 set: 5 pool: 3 bsz: 8192 bsi: 0 sflg: 2 pwc: 0,15 dbwrid: 0 obj: 76896 objn: 76896 tsn: 0 afn: 1 hint: f hash: [0x96ee1fe8,0xbae9d5b8] lru: [0x96f4d0b0,0x96f4cdc0] obj-flags: object_ckpt_list ckptq: [0xbdf519b8,0x96f4d5a8] fileq: [0xbdf519d8,0xbdf519d8] objq: [0xb4a47b90,0xb4a47b90] objaq: [0x96f4d0e8,0xb4a47b70] st: XCURRENT md: NULL fpin: 'kduwh01: kdusru' tch: 1 le: 0x89fb25a0 flags: buffer_dirty redo_since_read remote_transfered LRBA: [0x11.9e18.0] LSCN: [0x0.1acdf6] HSCN: [0x0.1acdf6] HSUB: [1] buffer tsn: 0 rdba: 0x00415c91 (1/89233) scn: 0x0000.001acdf6 seq: 0x01 flg: 0x00 tail: 0xcdf60601 frmt: 0x02 chkval: 0x0000 type: 0x06=trans data GCS CLIENT 0x89fb2618,6 resp[(nil),0x15c91.1] pkey 76896.0 grant 2 cvt 0 mdrole 0x42 st 0x100 lst 0x20 GRANTQ rl G0 master 1 owner 2 sid 0 remote[(nil),0] hist 0x94121c601163423c history 0x3c.0x4.0xd.0xb.0x1.0xc.0x7.0x9.0x14.0x1. cflag 0x0 sender 1 flags 0x0 replay# 0 abast (nil).x0.1 dbmap (nil) disk: 0x0000.00000000 write request: 0x0000.00000000 pi scn: 0x0000.00000000 sq[(nil),(nil)] msgseq 0x1 updseq 0x0 reqids[6,0,0] infop (nil) lockseq x2b8 pkey 76896.0 hv 93 [stat 0x0, 1->1, wm 32768, RMno 0, reminc 18, dom 0] kjga st 0x4, step 0.0.0, cinc 20, rmno 6, flags 0x0 lb 0, hb 0, myb 15250, drmb 15250, apifrz 0 ?Instance 2??????block: (1/89233)? GLOBAL CACHE ELEMENT Lock Convert?lock: XG ????GC_ELEMENTS DUMP???XCUR Cache Fusion?,???????X$ VIEW,??? X$LE X$KJBR X$KJBL, ???X$ VIEW???????????????????: INSTANCE 2 Session D: SELECT * FROM x$le WHERE le_addr IN (SELECT le_addr FROM x$bh WHERE obj IN (SELECT data_object_id FROM dba_objects WHERE owner = 'SYS' AND object_name = 'TEST') AND class = 1 AND state != 3); ADDR INDX INST_ID LE_ADDR LE_ID1 LE_ID2 ---------------- ---------- ---------- ---------------- ---------- ---------- LE_RLS LE_ACQ LE_FLAGS LE_MODE LE_WRITE LE_LOCAL LE_RECOVERY ---------- ---------- ---------- ---------- ---------- ---------- ----------- LE_BLKS LE_TIME LE_KJBL ---------- ---------- ---------------- 00007F94CA14CF60 7003 2 0000000089FB25A0 89233 1 0 0 32 2 0 1 0 1 0 0000000089FB2618 PCM Resource NAME?[ID1][ID2],[BL]???, ID1?ID2 ??blockno? fileno????, ??????????GC_elements dump?? id1: 0x15c91 id2: 0×1 pkey: OBJ#76896 block: (1/89233)?? ,?  kjblname ? kjbrname ??”[0x15c91][0x1],[BL]” ??: INSTANCE 2 Session D: SQL> set linesize 80 pagesize 1400 SQL> SELECT * 2 FROM x$kjbl l 3 WHERE l.kjblname LIKE '%[0x15c91][0x1],[BL]%'; ADDR INDX INST_ID KJBLLOCKP KJBLGRANT KJBLREQUE ---------------- ---------- ---------- ---------------- --------- --------- KJBLROLE KJBLRESP KJBLNAME ---------- ---------------- ------------------------------ KJBLNAME2 KJBLQUEUE ------------------------------ ---------- KJBLLOCKST KJBLWRITING ---------------------------------------------------------------- ----------- KJBLREQWRITE KJBLOWNER KJBLMASTER KJBLBLOCKED KJBLBLOCKER KJBLSID KJBLRDOMID ------------ ---------- ---------- ----------- ----------- ---------- ---------- KJBLPKEY ---------- 00007F94CA22A288 451 2 0000000089FB2618 KJUSEREX KJUSERNL 0 00 [0x15c91][0x1],[BL][ext 0x0,0x 89233,1,BL 0 GRANTED 0 0 1 0 0 0 0 0 76896 SQL> SELECT r.* FROM x$kjbr r WHERE r.kjbrname LIKE '%[0x15c91][0x1],[BL]%'; no rows selected Instance 1 session B: SQL> SELECT r.* FROM x$kjbr r WHERE r.kjbrname LIKE '%[0x15c91][0x1],[BL]%'; ADDR INDX INST_ID KJBRRESP KJBRGRANT KJBRNCVL ---------------- ---------- ---------- ---------------- --------- --------- KJBRROLE KJBRNAME KJBRMASTER KJBRGRANTQ ---------- ------------------------------ ---------- ---------------- KJBRCVTQ KJBRWRITER KJBRSID KJBRRDOMID KJBRPKEY ---------------- ---------------- ---------- ---------- ---------- 00007F801ACA68F8 1355 1 00000000B5A62AE0 KJUSEREX KJUSERNL 0 [0x15c91][0x1],[BL][ext 0x0,0x 0 00000000B48BB330 00 00 0 0 76896 ??????Instance 1???block: (1/89233),??????Instance 2 build cr block ????Instance 1, ?????????? ????? Instance 1? Foreground Process ? Instance 2?LMS??????RAC  TRACE: Instance 2: [oracle@vrh2 ~]$ ps -ef|grep ora_lms|grep -v grep oracle 23364 1 0 Apr29 ? 00:33:15 ora_lms0_VPROD2 SQL> oradebug setospid 23364 Oracle pid: 13, Unix process pid: 23364, image: [email protected] (LMS0) SQL> oradebug event 10046 trace name context forever,level 8:10708 trace name context forever,level 103: trace[rac.*] disk high; Statement processed. SQL> oradebug tracefile_name /s01/orabase/diag/rdbms/vprod/VPROD2/trace/VPROD2_lms0_23364.trc Instance 1 session B : SQL> select state,cr_scn_bas from x$bh where file#=1 and dbablk=89233 and state!=0; STATE CR_SCN_BAS ---------- ---------- 3 1756658 3 1756661 3 1755287 Instance 1 session A : SQL> alter session set events '10046 trace name context forever,level 8:10708 trace name context forever,level 103: trace[rac.*] disk high'; Session altered. SQL> select * from test; ID ---------- 2 2 SQL> select state,cr_scn_bas from x$bh where file#=1 and dbablk=89233 and state!=0; STATE CR_SCN_BAS ---------- ---------- 3 1761520 ?x$BH?????,???????Instance 1???build??CR block,????? TRACE ??: Instance 1 foreground Process: PARSING IN CURSOR #140336527348792 len=18 dep=0 uid=0 oct=3 lid=0 tim=1335939136125254 hv=1689401402 ad='b1a4c828' sqlid='c99yw1xkb4f1u' select * from test END OF STMT PARSE #140336527348792:c=2999,e=2860,p=0,cr=0,cu=0,mis=1,r=0,dep=0,og=1,plh=1357081020,tim=1335939136125253 EXEC #140336527348792:c=0,e=40,p=0,cr=0,cu=0,mis=0,r=0,dep=0,og=1,plh=1357081020,tim=1335939136125373 WAIT #140336527348792: nam='SQL*Net message to client' ela= 6 driver id=1650815232 #bytes=1 p3=0 obj#=0 tim=1335939136125420 *** 2012-05-02 02:12:16.125 kclscrs: req=0 block=1/89233 2012-05-02 02:12:16.125574 : kjbcro[0x15c91.1 76896.0][4] *** 2012-05-02 02:12:16.125 kclscrs: req=0 typ=nowait-abort *** 2012-05-02 02:12:16.125 kclscrs: bid=1:3:1:0:f:1e:0:0:10:0:0:0:1:2:4:1:20:0:0:0:c3:49:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:4:3:2:1:2:0:1c:0:4d:26:a3:52:0:0:0:0:c7:c:ca:62:c3:49:0:0:0:0:1:0:14:8e:47:76:1:2:dc:5:a9:fe:17:75:0:0:0:0:0:0:0:0:0:0:0:0:99:ed:0:0:0:0:0:0:10:0:0:0 2012-05-02 02:12:16.125718 : kjbcro[0x15c91.1 76896.0][4] 2012-05-02 02:12:16.125751 : GSIPC:GMBQ: buff 0xba0ee018, queue 0xbb79a7b8, pool 0x60013fa0, freeq 0, nxt 0xbb79a7b8, prv 0xbb79a7b8 2012-05-02 02:12:16.125780 : kjbsentscn[0x0.1ae0f0][to 2] 2012-05-02 02:12:16.125806 : GSIPC:SENDM: send msg 0xba0ee088 dest x20001 seq 177740 type 36 tkts xff0000 mlen x1680198 2012-05-02 02:12:16.125918 : kjbmscr(0x15c91.1)reqid=0x8(req 0xa4ff30f8)(rinst 1)hldr 2(infosz 200)(lseq x2b8) 2012-05-02 02:12:16.126959 : GSIPC:KSXPCB: msg 0xba0ee088 status 30, type 36, dest 2, rcvr 1 *** 2012-05-02 02:12:16.127 kclwcrs: wait=0 tm=1233 *** 2012-05-02 02:12:16.127 kclwcrs: got 1 blocks from ksxprcv WAIT #140336527348792: nam='gc cr block 2-way' ela= 1233 p1=1 p2=89233 p3=1 obj#=76896 tim=1335939136127199 2012-05-02 02:12:16.127272 : kjbcrcomplete[0x15c91.1 76896.0][0] 2012-05-02 02:12:16.127309 : kjbrcvdscn[0x0.1ae0f0][from 2][idx 2012-05-02 02:12:16.127329 : kjbrcvdscn[no bscn <= rscn 0x0.1ae0f0][from 2] ???? kjbcro[0x15c91.1 76896.0][4] kjbsentscn[0x0.1ae0f0][to 2] ?Instance 2??SCN=1ae0f0=1761520? block: (1/89233),???’gc cr block 2-way’ ??,?????????CR block? Instance 2 LMS TRACE 2012-05-02 02:12:15.634057 : GSIPC:RCVD: ksxp msg 0x7f16e1598588 sndr 1 seq 0.177740 type 36 tkts 0 2012-05-02 02:12:15.634094 : GSIPC:RCVD: watq msg 0x7f16e1598588 sndr 1, seq 177740, type 36, tkts 0 2012-05-02 02:12:15.634108 : GSIPC:TKT: collect msg 0x7f16e1598588 from 1 for rcvr -1, tickets 0 2012-05-02 02:12:15.634162 : kjbrcvdscn[0x0.1ae0f0][from 1][idx 2012-05-02 02:12:15.634186 : kjbrcvdscn[no bscn1, wm 32768, RMno 0, reminc 18, dom 0] kjga st 0x4, step 0.0.0, cinc 20, rmno 6, flags 0x0 lb 0, hb 0, myb 15250, drmb 15250, apifrz 0 GCS CLIENT END 2012-05-02 02:12:15.635211 : kjbdowncvt[0x15c91.1 76896.0][1][options x0] 2012-05-02 02:12:15.635230 : GSIPC:AMBUF: rcv buff 0x7f16e1c56420, pool rcvbuf, rqlen 1103 2012-05-02 02:12:15.635308 : GSIPC:GPBMSG: new bmsg 0x7f16e1c56490 mb 0x7f16e1c56420 msg 0x7f16e1c564b0 mlen 152 dest x101 flushsz -1 2012-05-02 02:12:15.635334 : kjbmslset(0x15c91.1)) seq 0x4 reqid=0x6 (shadow 0xb48bb330.xb)(rsn 2)(mas@1) 2012-05-02 02:12:15.635355 : GSIPC:SPBMSG: send bmsg 0x7f16e1c56490 blen 184 msg 0x7f16e1c564b0 mtype 33 attr|dest x30101 bsz|fsz x1ffff 2012-05-02 02:12:15.635377 : GSIPC:SNDQ: enq msg 0x7f16e1c56490, type 65521 seq 118669, inst 1, receiver 1, queued 1 *** 2012-05-02 02:12:15.635 kclccctx: cleanup copy 0x7f16e1d94798 2012-05-02 02:12:15.635479 : [kjmpmsgi:compl][type 36][msg 0x7f16e1598588][seq 177740.0][qtime 0][ptime 1257] 2012-05-02 02:12:15.635511 : GSIPC:BSEND: flushing sndq 0xb491dd28, id 1, dcx 0xbc516778, inst 1, rcvr 1 qlen 0 1 2012-05-02 02:12:15.635536 : GSIPC:BSEND: no batch1 msg 0x7f16e1c56490 type 65521 len 184 dest (1:1) 2012-05-02 02:12:15.635557 : kjbsentscn[0x0.1ae0f1][to 1] 2012-05-02 02:12:15.635578 : GSIPC:SENDM: send msg 0x7f16e1c56490 dest x10001 seq 118669 type 65521 tkts x10002 mlen xb800e8 WAIT #0: nam='gcs remote message' ela= 180 waittime=1 poll=0 event=0 obj#=0 tim=1335939135635819 2012-05-02 02:12:15.635853 : GSIPC:RCVD: ksxp msg 0x7f16e167e0b0 sndr 1 seq 0.177741 type 32 tkts 0 2012-05-02 02:12:15.635875 : GSIPC:RCVD: watq msg 0x7f16e167e0b0 sndr 1, seq 177741, type 32, tkts 0 2012-05-02 02:12:15.636012 : GSIPC:TKT: collect msg 0x7f16e167e0b0 from 1 for rcvr -1, tickets 0 2012-05-02 02:12:15.636040 : kjbrcvdscn[0x0.1ae0f1][from 1][idx 2012-05-02 02:12:15.636060 : kjbrcvdscn[no bscn <= rscn 0x0.1ae0f1][from 1] 2012-05-02 02:12:15.636082 : GSIPC:TKT: dest (1:1) rtkt not acked 1  unassigned bufs 0  tkts 0  newbufs 0 2012-05-02 02:12:15.636102 : GSIPC:TKT: remove ctx dest (1:1) 2012-05-02 02:12:15.636125 : [kjmxmpm][type 32][seq 0.177741][msg 0x7f16e167e0b0][from 1] 2012-05-02 02:12:15.636146 : kjbmpocr(0xb0.6)seq 0x1,reqid=0x23a,(client 0x9fff7b58,0x1)(from 1)(lseq xdf0) 2????LMS????????? ??gcs remote message GSIPC ????SCN=[0x0.1ae0f0] block=1/89233???,??BAST kjbmpbast(0x15c91.1),?? block=1/89233??????? ??fairness??(?11.2.0.3???_fairness_threshold=2),?current block?KCL: F156: fairness downconvert,?Xcurrent DownConvert? Scurrent: Instance 2: SQL> select state,cr_scn_bas from x$bh where file#=1 and dbablk=89233 and state!=0; STATE CR_SCN_BAS ---------- ---------- 2 0 3 1756658 ??Instance 2 LMS ?cr block??? kjbmslset(0x15c91.1)) ????SEND QUEUE GSIPC:SNDQ: enq msg 0x7f16e1c56490? ???????Instance 1???? block: (1/89233)??? ??????: Instance 2: SQL> select CURRENT_RESULTS,LIGHT_WORKS from v$cr_block_server; CURRENT_RESULTS LIGHT_WORKS --------------- ----------- 29273 437 Instance 1 session A: SQL> SQL> select * from test; ID ---------- 2 2 SQL> select state,cr_scn_bas from x$bh where file#=1 and dbablk=89233 and state!=0; STATE CR_SCN_BAS ---------- ---------- 3 1761942 3 1761932 1 0 3 1761520 Instance 2: SQL> select CURRENT_RESULTS,LIGHT_WORKS from v$cr_block_server; CURRENT_RESULTS LIGHT_WORKS --------------- ----------- 29274 437 select * from test END OF STMT PARSE #140336529675592:c=0,e=337,p=0,cr=0,cu=0,mis=0,r=0,dep=0,og=1,plh=1357081020,tim=1335939668940051 EXEC #140336529675592:c=0,e=96,p=0,cr=0,cu=0,mis=0,r=0,dep=0,og=1,plh=1357081020,tim=1335939668940204 WAIT #140336529675592: nam='SQL*Net message to client' ela= 5 driver id=1650815232 #bytes=1 p3=0 obj#=0 tim=1335939668940348 *** 2012-05-02 02:21:08.940 kclscrs: req=0 block=1/89233 2012-05-02 02:21:08.940676 : kjbcro[0x15c91.1 76896.0][5] *** 2012-05-02 02:21:08.940 kclscrs: req=0 typ=nowait-abort *** 2012-05-02 02:21:08.940 kclscrs: bid=1:3:1:0:f:21:0:0:10:0:0:0:1:2:4:1:20:0:0:0:c3:49:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:4:3:2:1:2:0:1f:0:4d:26:a3:52:0:0:0:0:c7:c:ca:62:c3:49:0:0:0:0:1:0:17:8e:47:76:1:2:dc:5:a9:fe:17:75:0:0:0:0:0:0:0:0:0:0:0:0:99:ed:0:0:0:0:0:0:10:0:0:0 2012-05-02 02:21:08.940799 : kjbcro[0x15c91.1 76896.0][5] 2012-05-02 02:21:08.940833 : GSIPC:GMBQ: buff 0xba0ee018, queue 0xbb79a7b8, pool 0x60013fa0, freeq 0, nxt 0xbb79a7b8, prv 0xbb79a7b8 2012-05-02 02:21:08.940859 : kjbsentscn[0x0.1ae28c][to 2] 2012-05-02 02:21:08.940870 : GSIPC:SENDM: send msg 0xba0ee088 dest x20001 seq 177810 type 36 tkts xff0000 mlen x1680198 2012-05-02 02:21:08.940976 : kjbmscr(0x15c91.1)reqid=0xa(req 0xa4ff30f8)(rinst 1)hldr 2(infosz 200)(lseq x2b8) 2012-05-02 02:21:08.941314 : GSIPC:KSXPCB: msg 0xba0ee088 status 30, type 36, dest 2, rcvr 1 *** 2012-05-02 02:21:08.941 kclwcrs: wait=0 tm=707 *** 2012-05-02 02:21:08.941 kclwcrs: got 1 blocks from ksxprcv 2012-05-02 02:21:08.941818 : kjbassume[0x15c91.1][sender 2][mymode x1][myrole x0][srole x0][flgs x0][spiscn 0x0.0][swscn 0x0.0] 2012-05-02 02:21:08.941852 : kjbrcvdscn[0x0.1ae28d][from 2][idx 2012-05-02 02:21:08.941871 : kjbrcvdscn[no bscn ??????????????SCN=[0x0.1ae28c]=1761932 Version?CR block, ????receive????Xcurrent Block??SCN=1ae28d=1761933,Instance 1???Xcurrent Block???build????????SCN=1761932?CR BLOCK, ????????Current block,?????????'gc current block 2-way'? ?????????????request current block,?????kjbcro;?????Instance 2?LMS???????Current Block: Instance 2 LMS trace: 2012-05-02 02:21:08.448743 : GSIPC:RCVD: ksxp msg 0x7f16e14a4398 sndr 1 seq 0.177810 type 36 tkts 0 2012-05-02 02:21:08.448778 : GSIPC:RCVD: watq msg 0x7f16e14a4398 sndr 1, seq 177810, type 36, tkts 0 2012-05-02 02:21:08.448798 : GSIPC:TKT: collect msg 0x7f16e14a4398 from 1 for rcvr -1, tickets 0 2012-05-02 02:21:08.448816 : kjbrcvdscn[0x0.1ae28c][from 1][idx 2012-05-02 02:21:08.448834 : kjbrcvdscn[no bscn <= rscn 0x0.1ae28c][from 1] 2012-05-02 02:21:08.448857 : GSIPC:TKT: dest (1:1) rtkt not acked 2  unassigned bufs 0  tkts 0  newbufs 0 2012-05-02 02:21:08.448875 : GSIPC:TKT: remove ctx dest (1:1) 2012-05-02 02:21:08.448970 : [kjmxmpm][type 36][seq 0.177810][msg 0x7f16e14a4398][from 1] 2012-05-02 02:21:08.448993 : kjbmpbast(0x15c91.1) reqid=0x6 (req 0xa4ff30f8)(reqinst 1)(reqid 10)(flags x0) *** 2012-05-02 02:21:08.449 kclcrrf: req=48054 block=1/89233 *** 2012-05-02 02:21:08.449 kcl_compress_block: compressed: 6 free space: 7680 2012-05-02 02:21:08.449085 : kjbsentscn[0x0.1ae28d][to 1] 2012-05-02 02:21:08.449142 : kjbdeliver[to 1][0xa4ff30f8][10][current 1] 2012-05-02 02:21:08.449164 : kjbmssch(reqlock 0xa4ff30f8,10)(to 1)(bsz 344) 2012-05-02 02:21:08.449183 : GSIPC:AMBUF: rcv buff 0x7f16e18bcec8, pool rcvbuf, rqlen 1102 *** 2012-05-02 02:21:08.449 kclccctx: cleanup copy 0x7f16e1d94838 *** 2012-05-02 02:21:08.449 kcltouched: touch seconds 3271 *** 2012-05-02 02:21:08.449 kclgrantlk: req=48054 2012-05-02 02:21:08.449347 : [kjmpmsgi:compl][type 36][msg 0x7f16e14a4398][seq 177810.0][qtime 0][ptime 1119] WAIT #0: nam='gcs remote message' ela= 568 waittime=1 poll=0 event=0 obj#=0 tim=1335939668449962 2012-05-02 02:21:08.450001 : GSIPC:RCVD: ksxp msg 0x7f16e1bb22a0 sndr 1 seq 0.177811 type 32 tkts 0 2012-05-02 02:21:08.450024 : GSIPC:RCVD: watq msg 0x7f16e1bb22a0 sndr 1, seq 177811, type 32, tkts 0 2012-05-02 02:21:08.450043 : GSIPC:TKT: collect msg 0x7f16e1bb22a0 from 1 for rcvr -1, tickets 0 2012-05-02 02:21:08.450060 : kjbrcvdscn[0x0.1ae28e][from 1][idx 2012-05-02 02:21:08.450078 : kjbrcvdscn[no bscn <= rscn 0x0.1ae28e][from 1] 2012-05-02 02:21:08.450097 : GSIPC:TKT: dest (1:1) rtkt not acked 3  unassigned bufs 0  tkts 0  newbufs 0 2012-05-02 02:21:08.450116 : GSIPC:TKT: remove ctx dest (1:1) 2012-05-02 02:21:08.450136 : [kjmxmpm][type 32][seq 0.177811][msg 0x7f16e1bb22a0][from 1] 2012-05-02 02:21:08.450155 : kjbmpocr(0xb0.6)seq 0x1,reqid=0x23e,(client 0x9fff7b58,0x1)(from 1)(lseq xdf4) ???Instance 2??LMS???,???build cr block,??????Instance 1?????Current Block??????Instance 2??v$cr_block_server??????LIGHT_WORKS?????current block transfer??????,??????? CR server? Light Work Rule(Light Work Rule?8i Cr Server?????????,?Remote LMS?? build CR????????,resource holder?LMS???????block,????CR build If creating the consistent read version block involves too much work (such as reading blocks from disk), then the holder sends the block to the requestor, and the requestor completes the CR fabrication. The holder maintains a fairness counter of CR requests. After the fairness threshold is reached, the holder downgrades it to lock mode.)? ??????? CR Request ????Current Block?? ???:??????class?block,CR server??????? ??undo block?? undo header block?CR quest, LMS????Current Block, ????? ???? ??????? block cleanout? CR  Version??????? ???????? data blocks, ??????? CR quest  & CR received?(???????Light Work Rule,LMS"??"), ??Current Block??DownConvert???S lock,??LMS???????ship??current version?block? ??????? , ?????? ,???????DownConvert?????”_fairness_threshold“???200,????Xcurrent Block?????Scurrent, ????LMS?????Current Version?Data Block: SQL> show parameter fair NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ _fairness_threshold integer 200 Instance 1: SQL> update test set id=id+1 where id=4; 1 row updated. Instance 2: SQL> update test set id=id+1 where id=2; 1 row updated. SQL> select state,cr_scn_bas from x$bh where file#=1 and dbablk=89233 and state!=0; STATE CR_SCN_BAS ---------- ---------- 1 0 3 1838166 ?Instance 1? ????,? ??instance 2? v$cr_block_server?? instance 1 SQL> select * from test; ID ---------- 10 3 instance 2: SQL> select state,cr_scn_bas from x$bh where file#=1 and dbablk=89233 and state!=0; STATE CR_SCN_BAS ---------- ---------- 1 0 3 1883707 8 0 SQL> select * from test; ID ---------- 10 3 SQL> select state,cr_scn_bas from x$bh where file#=1 and dbablk=89233 and state!=0; STATE CR_SCN_BAS ---------- ---------- 1 0 3 1883707 8 0 ................... SQL> / STATE CR_SCN_BAS ---------- ---------- 2 0 3 1883707 3 1883695 repeat cr request on Instance 1 SQL> / STATE CR_SCN_BAS ---------- ---------- 8 0 3 1883707 3 1883695 ??????_fairness_threshold????????,?????200 ????????CR serve??Downgrade?lock, ????data block? CR Request????Receive? Current Block?

    Read the article

  • Scaling-out Your Services by Message Bus based WCF Transport Extension &ndash; Part 1 &ndash; Background

    - by Shaun
    Cloud computing gives us more flexibility on the computing resource, we can provision and deploy an application or service with multiple instances over multiple machines. With the increment of the service instances, how to balance the incoming message and workload would become a new challenge. Currently there are two approaches we can use to pass the incoming messages to the service instances, I would like call them dispatcher mode and pulling mode.   Dispatcher Mode The dispatcher mode introduces a role which takes the responsible to find the best service instance to process the request. The image below describes the sharp of this mode. There are four clients communicate with the service through the underlying transportation. For example, if we are using HTTP the clients might be connecting to the same service URL. On the server side there’s a dispatcher listening on this URL and try to retrieve all messages. When a message came in, the dispatcher will find a proper service instance to process it. There are three mechanism to find the instance: Round-robin: Dispatcher will always send the message to the next instance. For example, if the dispatcher sent the message to instance 2, then the next message will be sent to instance 3, regardless if instance 3 is busy or not at that moment. Random: Dispatcher will find a service instance randomly, and same as the round-robin mode it regardless if the instance is busy or not. Sticky: Dispatcher will send all related messages to the same service instance. This approach always being used if the service methods are state-ful or session-ful. But as you can see, all of these approaches are not really load balanced. The clients will send messages at any time, and each message might take different process duration on the server side. This means in some cases, some of the service instances are very busy while others are almost idle. For example, if we were using round-robin mode, it could be happened that most of the simple task messages were passed to instance 1 while the complex ones were sent to instance 3, even though instance 1 should be idle. This brings some problem in our architecture. The first one is that, the response to the clients might be longer than it should be. As it’s shown in the figure above, message 6 and 9 can be processed by instance 1 or instance 2, but in reality they were dispatched to the busy instance 3 since the dispatcher and round-robin mode. Secondly, if there are many requests came from the clients in a very short period, service instances might be filled by tons of pending tasks and some instances might be crashed. Third, if we are using some cloud platform to host our service instances, for example the Windows Azure, the computing resource is billed by service deployment period instead of the actual CPU usage. This means if any service instance is idle it is wasting our money! Last one, the dispatcher would be the bottleneck of our system since all incoming messages must be routed by the dispatcher. If we are using HTTP or TCP as the transport, the dispatcher would be a network load balance. If we wants more capacity, we have to scale-up, or buy a hardware load balance which is very expensive, as well as scaling-out the service instances. Pulling Mode Pulling mode doesn’t need a dispatcher to route the messages. All service instances are listening to the same transport and try to retrieve the next proper message to process if they are idle. Since there is no dispatcher in pulling mode, it requires some features on the transportation. The transportation must support multiple client connection and server listening. HTTP and TCP doesn’t allow multiple clients are listening on the same address and port, so it cannot be used in pulling mode directly. All messages in the transportation must be FIFO, which means the old message must be received before the new one. Message selection would be a plus on the transportation. This means both service and client can specify some selection criteria and just receive some specified kinds of messages. This feature is not mandatory but would be very useful when implementing the request reply and duplex WCF channel modes. Otherwise we must have a memory dictionary to store the reply messages. I will explain more about this in the following articles. Message bus, or the message queue would be best candidate as the transportation when using the pulling mode. First, it allows multiple application to listen on the same queue, and it’s FIFO. Some of the message bus also support the message selection, such as TIBCO EMS, RabbitMQ. Some others provide in memory dictionary which can store the reply messages, for example the Redis. The principle of pulling mode is to let the service instances self-managed. This means each instance will try to retrieve the next pending incoming message if they finished the current task. This gives us more benefit and can solve the problems we met with in the dispatcher mode. The incoming message will be received to the best instance to process, which means this will be very balanced. And it will not happen that some instances are busy while other are idle, since the idle one will retrieve more tasks to make them busy. Since all instances are try their best to be busy we can use less instances than dispatcher mode, which more cost effective. Since there’s no dispatcher in the system, there is no bottleneck. When we introduced more service instances, in dispatcher mode we have to change something to let the dispatcher know the new instances. But in pulling mode since all service instance are self-managed, there no extra change at all. If there are many incoming messages, since the message bus can queue them in the transportation, service instances would not be crashed. All above are the benefits using the pulling mode, but it will introduce some problem as well. The process tracking and debugging become more difficult. Since the service instances are self-managed, we cannot know which instance will process the message. So we need more information to support debug and track. Real-time response may not be supported. All service instances will process the next message after the current one has done, if we have some real-time request this may not be a good solution. Compare with the Pros and Cons above, the pulling mode would a better solution for the distributed system architecture. Because what we need more is the scalability, cost-effect and the self-management.   WCF and WCF Transport Extensibility Windows Communication Foundation (WCF) is a framework for building service-oriented applications. In the .NET world WCF is the best way to implement the service. In this series I’m going to demonstrate how to implement the pulling mode on top of a message bus by extending the WCF. I don’t want to deep into every related field in WCF but will highlight its transport extensibility. When we implemented an RPC foundation there are many aspects we need to deal with, for example the message encoding, encryption, authentication and message sending and receiving. In WCF, each aspect is represented by a channel. A message will be passed through all necessary channels and finally send to the underlying transportation. And on the other side the message will be received from the transport and though the same channels until the business logic. This mode is called “Channel Stack” in WCF, and the last channel in the channel stack must always be a transport channel, which takes the responsible for sending and receiving the messages. As we are going to implement the WCF over message bus and implement the pulling mode scaling-out solution, we need to create our own transport channel so that the client and service can exchange messages over our bus. Before we deep into the transport channel, let’s have a look on the message exchange patterns that WCF defines. Message exchange pattern (MEP) defines how client and service exchange the messages over the transportation. WCF defines 3 basic MEPs which are datagram, Request-Reply and Duplex. Datagram: Also known as one-way, or fire-forgot mode. The message sent from the client to the service, and no need any reply from the service. The client doesn’t care about the message result at all. Request-Reply: Very common used pattern. The client send the request message to the service and wait until the reply message comes from the service. Duplex: The client sent message to the service, when the service processing the message it can callback to the client. When callback the service would be like a client while the client would be like a service. In WCF, each MEP represent some channels associated. MEP Channels Datagram IInputChannel, IOutputChannel Request-Reply IRequestChannel, IReplyChannel Duplex IDuplexChannel And the channels are created by ChannelListener on the server side, and ChannelFactory on the client side. The ChannelListener and ChannelFactory are created by the TransportBindingElement. The TransportBindingElement is created by the Binding, which can be defined as a new binding or from a custom binding. For more information about the transport channel mode, please refer to the MSDN document. The figure below shows the transport channel objects when using the request-reply MEP. And this is the datagram MEP. And this is the duplex MEP. After investigated the WCF transport architecture, channel mode and MEP, we finally identified what we should do to extend our message bus based transport layer. They are: Binding: (Optional) Defines the channel elements in the channel stack and added our transport binding element at the bottom of the stack. But we can use the build-in CustomBinding as well. TransportBindingElement: Defines which MEP is supported in our transport and create the related ChannelListener and ChannelFactory. This also defines the scheme of the endpoint if using this transport. ChannelListener: Create the server side channel based on the MEP it’s. We can have one ChannelListener to create channels for all supported MEPs, or we can have ChannelListener for each MEP. In this series I will use the second approach. ChannelFactory: Create the client side channel based on the MEP it’s. We can have one ChannelFactory to create channels for all supported MEPs, or we can have ChannelFactory for each MEP. In this series I will use the second approach. Channels: Based on the MEPs we want to support, we need to implement the channels accordingly. For example, if we want our transport support Request-Reply mode we should implement IRequestChannel and IReplyChannel. In this series I will implement all 3 MEPs listed above one by one. Scaffold: In order to make our transport extension works we also need to implement some scaffold stuff. For example we need some classes to send and receive message though out message bus. We also need some codes to read and write the WCF message, etc.. These are not necessary but would be very useful in our example.   Message Bus There is only one thing remained before we can begin to implement our scaling-out support WCF transport, which is the message bus. As I mentioned above, the message bus must have some features to fulfill all the WCF MEPs. In my company we will be using TIBCO EMS, which is an enterprise message bus product. And I have said before we can use any message bus production if it’s satisfied with our requests. Here I would like to introduce an interface to separate the message bus from the WCF. This allows us to implement the bus operations by any kinds bus we are going to use. The interface would be like this. 1: public interface IBus : IDisposable 2: { 3: string SendRequest(string message, bool fromClient, string from, string to = null); 4:  5: void SendReply(string message, bool fromClient, string replyTo); 6:  7: BusMessage Receive(bool fromClient, string replyTo); 8: } There are only three methods for the bus interface. Let me explain one by one. The SendRequest method takes the responsible for sending the request message into the bus. The parameters description are: message: The WCF message content. fromClient: Indicates if this message was came from the client. from: The channel ID that this message was sent from. The channel ID will be generated when any kinds of channel was created, which will be explained in the following articles. to: The channel ID that this message should be received. In Request-Reply and Duplex MEP this is necessary since the reply message must be received by the channel which sent the related request message. The SendReply method takes the responsible for sending the reply message. It’s very similar as the previous one but no “from” parameter. This is because it’s no need to reply a reply message again in any MEPs. The Receive method takes the responsible for waiting for a incoming message, includes the request message and specified reply message. It returned a BusMessage object, which contains some information about the channel information. The code of the BusMessage class is 1: public class BusMessage 2: { 3: public string MessageID { get; private set; } 4: public string From { get; private set; } 5: public string ReplyTo { get; private set; } 6: public string Content { get; private set; } 7:  8: public BusMessage(string messageId, string fromChannelId, string replyToChannelId, string content) 9: { 10: MessageID = messageId; 11: From = fromChannelId; 12: ReplyTo = replyToChannelId; 13: Content = content; 14: } 15: } Now let’s implement a message bus based on the IBus interface. Since I don’t want you to buy and install the TIBCO EMS or any other message bus products, I will implement an in process memory bus. This bus is only for test and sample purpose. It can only be used if the service and client are in the same process. Very straightforward. 1: public class InProcMessageBus : IBus 2: { 3: private readonly ConcurrentDictionary<Guid, InProcMessageEntity> _queue; 4: private readonly object _lock; 5:  6: public InProcMessageBus() 7: { 8: _queue = new ConcurrentDictionary<Guid, InProcMessageEntity>(); 9: _lock = new object(); 10: } 11:  12: public string SendRequest(string message, bool fromClient, string from, string to = null) 13: { 14: var entity = new InProcMessageEntity(message, fromClient, from, to); 15: _queue.TryAdd(entity.ID, entity); 16: return entity.ID.ToString(); 17: } 18:  19: public void SendReply(string message, bool fromClient, string replyTo) 20: { 21: var entity = new InProcMessageEntity(message, fromClient, null, replyTo); 22: _queue.TryAdd(entity.ID, entity); 23: } 24:  25: public BusMessage Receive(bool fromClient, string replyTo) 26: { 27: InProcMessageEntity e = null; 28: while (true) 29: { 30: lock (_lock) 31: { 32: var entity = _queue 33: .Where(kvp => kvp.Value.FromClient == fromClient && (kvp.Value.To == replyTo || string.IsNullOrWhiteSpace(kvp.Value.To))) 34: .FirstOrDefault(); 35: if (entity.Key != Guid.Empty && entity.Value != null) 36: { 37: _queue.TryRemove(entity.Key, out e); 38: } 39: } 40: if (e == null) 41: { 42: Thread.Sleep(100); 43: } 44: else 45: { 46: return new BusMessage(e.ID.ToString(), e.From, e.To, e.Content); 47: } 48: } 49: } 50:  51: public void Dispose() 52: { 53: } 54: } The InProcMessageBus stores the messages in the objects of InProcMessageEntity, which can take some extra information beside the WCF message itself. 1: public class InProcMessageEntity 2: { 3: public Guid ID { get; set; } 4: public string Content { get; set; } 5: public bool FromClient { get; set; } 6: public string From { get; set; } 7: public string To { get; set; } 8:  9: public InProcMessageEntity() 10: : this(string.Empty, false, string.Empty, string.Empty) 11: { 12: } 13:  14: public InProcMessageEntity(string content, bool fromClient, string from, string to) 15: { 16: ID = Guid.NewGuid(); 17: Content = content; 18: FromClient = fromClient; 19: From = from; 20: To = to; 21: } 22: }   Summary OK, now I have all necessary stuff ready. The next step would be implementing our WCF message bus transport extension. In this post I described two scaling-out approaches on the service side especially if we are using the cloud platform: dispatcher mode and pulling mode. And I compared the Pros and Cons of them. Then I introduced the WCF channel stack, channel mode and the transport extension part, and identified what we should do to create our own WCF transport extension, to let our WCF services using pulling mode based on a message bus. And finally I provided some classes that need to be used in the future posts that working against an in process memory message bus, for the demonstration purpose only. In the next post I will begin to implement the transport extension step by step.   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

    Read the article

  • CodePlex Daily Summary for Wednesday, November 23, 2011

    CodePlex Daily Summary for Wednesday, November 23, 2011Popular ReleasesVisual Leak Detector for Visual C++ 2008/2010: v2.2.1: Enhancements: * strdup and _wcsdup functions support added. * Preliminary support for VS 11 added. Bugs Fixed: * Low performance after upgrading from VLD v2.1. * Memory leaks with static linking fixed (disabled calloc support). * Runtime error R6002 fixed because of wrong memory dump format. * version.h fixed in installer. * Some PVS studio warning fixed.NetSqlAzMan - .NET SQL Authorization Manager: 3.6.0.10: 3.6.0.10 22-Nov-2011 Update: Removed PreEmptive Platform integration (PreEmptive analytics) Removed all PreEmptive attributes Removed PreEmptive.dll assembly references from all projects Added first support to ADAM/AD LDS Thanks to PatBea. Work Item 9775: http://netsqlazman.codeplex.com/workitem/9775Developer Team Article System Management: DTASM v1.3: ?? ??? ???? 3 ????? ???? ???? ????? ??? : - ????? ?????? ????? ???? ?? ??? ???? ????? ?? ??? ? ?? ???? ?????? ???? ?? ???? ????? ?? . - ??? ?? ???? ????? ???? ????? ???? ???? ?? ????? , ?????? ????? ????? ?? ??? . - ??? ??????? ??? ??? ???? ?? ????? ????? ????? .SharePoint 2010 FBA Pack: SharePoint 2010 FBA Pack 1.2.0: Web parts are now fully customizable via html templates (Issue #323) FBA Pack is now completely localizable using resource files. Thank you David Chen for submitting the code as well as Chinese translations of the FBA Pack! The membership request web part now gives the option of having the user enter the password and removing the captcha (Issue # 447) The FBA Pack will now work in a zone that does not have FBA enabled (Another zone must have FBA enabled, and the zone must contain the me...SharePoint 2010 Education Demo Project: Release SharePoint SP1 for Education Solutions: This release includes updates to the Content Packs for SharePoint SP1. All Content Packs have been updated to install successfully under SharePoint SP1SQL Monitor - tracking sql server activities: SQLMon 4.1 alpha 6: 1. improved support for schema 2. added find reference when right click on object list 3. added object rename supportBugNET Issue Tracker: BugNET 0.9.126: First stable release of version 0.9. Upgrades from 0.8 are fully supported and upgrades to future releases will also be supported. This release is now compiled against the .NET 4.0 framework and is a requirement. Because of this the web.config has significantly changed. After upgrading, you will need to configure the authentication settings for user registration and anonymous access again. Please see our installation / upgrade instructions for more details: http://wiki.bugnetproject.c...Anno 2070 Assistant: v0.1.0 (STABLE): Version 0.1.0 Features Production Chains Eco Production Chains (Complete) Tycoon Production Chains (Disabled - Incomplete) Tech Production Chains (Disabled - Incomplete) Supply (Disabled - Incomplete) Calculator (Disabled - Incomplete) Building Layouts Eco Building Layouts (Complete) Tycoon Building Layouts (Disabled - Incomplete) Tech Building Layouts (Disabled - Incomplete) Credits (Complete)Free SharePoint 2010 Sites Templates: SharePoint Server 2010 Sites Templates: here is the list of sites templates to be downloadedVsTortoise - a TortoiseSVN add-in for Microsoft Visual Studio: VsTortoise Build 30 Beta: Note: This release does not work with custom VsTortoise toolbars. These get removed every time when you shutdown Visual Studio. (#7940) Build 30 (beta)New: Support for TortoiseSVN 1.7 added. (the download contains both setups, for TortoiseSVN 1.6 and 1.7) New: OpenModifiedDocumentDialog displays conflicted files now. New: OpenModifiedDocument allows to group items by changelist now. Fix: OpenModifiedDocumentDialog caused Visual Studio 2010 to freeze sometimes. Fix: The installer didn...nopCommerce. Open source shopping cart (ASP.NET MVC): nopcommerce 2.30: Highlight features & improvements: • Performance optimization. • Back in stock notifications. • Product special price support. • Catalog mode (based on customer role) To see the full list of fixes and changes please visit the release notes page (http://www.nopCommerce.com/releasenotes.aspx).WPF Converters: WPF Converters V1.2.0.0: support for enumerations, value types, and reference types in the expression converter's equality operators the expression converter now handles DependencyProperty.UnsetValue as argument values correctly (#4062) StyleCop conformance (more or less)Json.NET: Json.NET 4.0 Release 4: Change - JsonTextReader.Culture is now CultureInfo.InvariantCulture by default Change - KeyValurPairConverter no longer cares about the order of the key and value properties Change - Time zone conversions now use new TimeZoneInfo instead of TimeZone Fix - Fixed boolean values sometimes being capitalized when converting to XML Fix - Fixed error when deserializing ConcurrentDictionary Fix - Fixed serializing some Uris returning the incorrect value Fix - Fixed occasional error when...Media Companion: MC 3.423b Weekly: Ensure .NET 4.0 Full Framework is installed. (Available from http://www.microsoft.com/download/en/details.aspx?id=17718) Ensure the NFO ID fix is applied when transitioning from versions prior to 3.416b. (Details here) Replaced 'Rebuild' with 'Refresh' throughout entire code. Rebuild will now be known as Refresh. mc_com.exe has been fully updated TV Show Resolutions... Resolved issue #206 - having to hit save twice when updating runtime manually Shrunk cache size and lowered loading times f...Delta Engine: Delta Engine Beta Preview v0.9.1: v0.9.1 beta release with lots of refactoring, fixes, new samples and support for iOS, Android and WP7 (you need a Marketplace account however). If you want a binary release for the games (like v0.9.0), just say so in the Forum or here and we will quickly prepare one. It is just not much different from v0.9.0, so I left it out this time. See http://DeltaEngine.net/Wiki.Roadmap for details.ASP.net Awesome Samples (Web-Forms): 1.0 samples: Demos and Tutorials for ASP.net Awesome VS2008 are in .NET 3.5 VS2010 are in .NET 4.0 (demos for the ASP.net Awesome jQuery Ajax Controls)SharpMap - Geospatial Application Framework for the CLR: SharpMap-0.9-AnyCPU-Trunk-2011.11.17: This is a build of SharpMap from the 0.9 development trunk as per 2011-11-17 For most applications the AnyCPU release is the recommended, but in case you need an x86 build that is included to. For some dataproviders (GDAL/OGR, SqLite, PostGis) you need to also referense the SharpMap.Extensions assembly For SqlServer Spatial you need to reference the SharpMap.SqlServerSpatial assemblyAJAX Control Toolkit: November 2011 Release: AJAX Control Toolkit Release Notes - November 2011 Release Version 51116November 2011 release of the AJAX Control Toolkit. AJAX Control Toolkit .NET 4 - Binary – AJAX Control Toolkit for .NET 4 and sample site (Recommended). AJAX Control Toolkit .NET 3.5 - Binary – AJAX Control Toolkit for .NET 3.5 and sample site (Recommended). Notes: - The current version of the AJAX Control Toolkit is not compatible with ASP.NET 2.0. The latest version that is compatible with ASP.NET 2.0 can be found h...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.36: Fix for issue #16908: string literals containing ASP.NET replacement syntax fail if the ASP.NET code contains the same character as the string literal delimiter. Also, we shouldn't be changing the delimiter for those literals or combining them with other literals; the developer may have specifically chosen the delimiter used because of possible content inserted by ASP.NET code. This logic is normally off; turn it on via the -aspnet command-line flag (or the Code.Settings.AllowEmbeddedAspNetBl...MVC Controls Toolkit: Mvc Controls Toolkit 1.5.5: Added: Now the DateRanteAttribute accepts complex expressions containing "Now" and "Today" as static minimum and maximum. Menu, MenuFor helpers capable of handling a "currently selected element". The developer can choose between using a standard nested menu based on a standard SimpleMenuItem class or specifying an item template based on a custom class. Added also helpers to build the tree structure containing all data items the menu takes infos from. Improved the pager. Now the developer ...New ProjectsActiveWorlds World Server Admin PowerShell SnapIn: The purpose of this PowerShell SnapIn is to provide a set of tools to administer the world server from PowerShell. It leverages the ActiveWorlds SDK .NET Wrapper to provide this functionality.Aigu: Enter special characters like you would on your mobile phone. For instance, if you want to type 'é', you just hold down 'e' and a menu will appear. Selected the desired character using the arrow keys and press 'enter'. Simple but powerful.Are you workaholic?: Are you a workaholic? Did your Doctor advice you not to stare at the computer monitor for a long time? Then this app is perfectly made for you. It runs in the background, and alerts you to take periodic rests for your eyes and body. What's more, It's open source (MS-PL).ATDIS PoC: privateAuto Version Web Assets: The AVWA project is an HTTP Module written in C# that is designed to allow for versioning of various web assets such as .CSS and .JS files. This allows you to publish new versions of these files without having to force the server or the client browsers to expire cache.Bachelor Thesis Algorithm Test Bed: Algorithm Test Bed for my Bachelor ThesisBase64: Simple application helps converting strings and files from or to Base64 string. You can use any encoding to convert while a sidebar previews decoded string for all other encodings.BoracayExpress: BoracayExpressC++ Framework for Test Driven Development: A testing framework for C++ written in C++.Class2Table: Class2Table aka Entity2Table. Easy tool that allows creation of SQL tables from .Net types.Code for Demos & Experiments: This is where I will post code from demos and presentationsCodeMaker: CodeMaker?????????: 1、?????????? 2、???? 3、????? 4、??Python????????? ConsoleCommand: ConsoleCommand provides certain .Net commands for access from javascript console engines. Included are commands to set the text and background colors, as well as list and extract resources compiled in a .Net dll. Converter: Character code conversion tools ???????? CryptoInator - self contained, self-encrypting, self-decrypting image viewer: Original developed to encrypt and store NemID images in Denmark. DAiBears: Something, something, botDelicious Notify Plugin: Lets you push a blog post straight to Delicious from Live WriterDeveloperFile: Compresses Javascripts using the YUI .NET project. Loops through the root folder and subfolders for files matching the debug extension and creates new files using the release extension. (File extensions must match exactly).DotNetNuke SharePoint File Explorer: A DotNetNuke SharePoint File ExplorerDouban FM: WP7 Douban FM appGame Lib: Game Library is a open-source game library to allow focusing on the fun part of a game. It is developed in C#, but will be ported to C++ and VB.net.Google reader notes to Delicious Export tool (WPF): Google reader discontinued note in reader features. Current google reader allows to export users old notes in JSON format, This App will parse the JSON file & upload it to it delicious , delicious is a good alternative for note in readerHtml Source Transmitter Control: This web control allows getting a source of a web page, that will displayed before submit. So, developer can store a view of the html page, that was before server exception. It helps to reproduce bugs and can be used with other logging systems.Ideopuzzle: A puzzle gameImageShack-Uploader: This project demonstrates how to upload files automated to imageshack.us and other image hosters with C#.Insert Acronym Tags: Lets you insert <acronym> and <abbr> tags into your blog entry more easily.Insert Quick Link: Allows you to paste a link into the Writer window and have the a window similar to the one in Writer where you can change what text is to appear, open in new window, etc.Insert Video Plugin: Allows you to insert a video into a blog entry from a multitude of different sitesIoCWrap: Provides a wrapper to the various IoC container implementations so that it is possible to switch to a different provider without changing any application code.kaveepoj: sharepoint projectKinect Quiz Engine: Fun quiz game for the Kinect.Klaverjas: Test application for testing different new technologies in .NET (WCF, DataServices, C# stuff, Entity...etc.)Man In The Middle: A cyberpunk themed action with puzzle and strategy elements. Made with XNA as part of a game development course at the IT University of Copenhagen by Bo Bendtsen, Jonas Flensbak, Daniel Kromand, Jess Rahbek & Darryl Woodford.MediaSelektor: Simple tool to select mediasMicajah Mindtouch Deki Wiki Copier: Small C# application to move data between 2 Deki Wiki installs or, more importantly, from a wik.is account to a locally installed systemMineFlagger: MineFlagger is a mine clearing game modeled after Microsoft’s Minesweeper. In addition to standard play, MineFlagger incorporates an AI for fun and training.myXbyqwrhjadsfasfhgf: myXbyqwrhjadsfasfhgfnatoop: natoopNauplius.KeyStore: Provides secure application key storage backed by SQL 2008 and Active Directory.ObjectDB: An object database written using C# 4 and Mono.Cecil.PaceR: PaceR is an attempt to encapsulate a lot of the common code functionality I use on different projects. Instead of recreating functionality from memory or worse, copying from older projects, I'd like to have a central location to maintain this common code. Parseq: Parseq is a Parser Combinator library written in C# (version 2.0).PowerShell Network Adapter Configuration module: PowerShell Network Adapter Configuration module is a PowerShell module which provides functions for managing network adapters using WMI.public traffic tracker: This is a university project for a .net course. We develop a public traffic tracker applications for Windows Phone 7 devices, that can give information about the actual positions of the nearest vehicle on a given line. The speciality is that we use only the GPS information of the users' WP7 devices, so this is a completely software solution without any hardware investment. The disatvantage is that for the real operation we would need a lot of active WP7 user.puyo: puyoRadioTroll: Projeto web Radio TrollRead Feed Community: Read Feed CommunityReviewer: Reviewer.dk - Dansk spil og anmeldelsessite.Rollout Sharepoint Solutions - ROSS: ROSS performs the following actions: - Delete sitecollection and restart services - 'Get Latest Version' from SourceSafe - Rebuild Solution - Install all wsp solutions - Create SiteCollections - Check for build en provisioning errors - Send email to developers if errors occurredSchool Management: school managementSQL File Executer: This project is a class library written in c# which is used for executing *.sql files in remote server. Simply one dll file. You include it in your web project, add using statement at the top of your page, pass the parameters inside. Rest, it will do.Startup Manager: Startup Manager launches all startup programs at a managed rate therefore meaning that your computer doesn't crash everytime it starts up and you can use it immediately.stetic: ...Test Infrastructure Guidance: The purpose of this project is to provide guidance to testers in using TFS effectively as an ALM solution. TFS is much more than a simple code repository. Used with Visual Studio it can form a powerful testing solution and remove a lot of pain in dealing with test infrastructure overhead.Tête-à-tête: Tete-a-tete is an address book with a built-in function to send electronic mail over the Internet.Tipeysh! - Add-in that helps you creating C/C++ header files on a single click: Are you also feel miserable when you need to create a new header file in your Visual Studio C/C++ project? Repeatedly choosing "new header file", then writing the annoying (but needed) "#ifndef" section, then writing the class name with it's "private", "protected" and "public" access modifiers... too much clicks and typewriting! Well, there is a solution: Tipeysh! is a simple, easy to use, very handy and configurable Visual Studio Add-In, compatible for both the 2005 and 2008 versions. Once ...UMN Dashboard Project: academic projUsersMOSS: UsersMOSS est une petite application permettant de consulter sur un serveur MOSS les sites web (SPWeb) les users (SPUser), et les groupes (SPGroup). Cette application utilise le modèle objet de MOSS pour inspecter le contenu des objets d'un serveur MOSS. Cette application est loin d'être professionnelle, ou même terminée, mais elle me rend très souvent service. Surtout ne l'utilisez pas sur un serveur de production car le gestion du GC n'est pas faite, ce qui peut provoquer des plantages de v...UtilityLibrary.Win32: UtilityLibrary.Win32UW iLearn: The iLearn activity inference platform is a suite of desktop and mobile tools for logging, modeling, and classifying sensor data for mobile devices. It was created at the University of Washington.VsDocGen: Dynamic javascript documentation generation directly from xml comment documented source code.Windows Live Spaces Photo Album plugin: This is going to be a plugin for Windows Live Writer that will allow you to browse a Windows Live Space Photo Album.Windows Live Writer Plugin for Amazon Books using CueCat: This Windows Live Writer Plugin is for users who use WLW and wish to use their CueCat to scan books. ItemLookups are run against Amazon via its AWS and book image, title, author, and publisher is returned. This project was first created by Scott Hanselman on MSDN's Coding4Fun! X7: X7 makes it easier for win7user to clean the system. You'll no longer have to delete useless stuff in your win7. It's developed in bat.xDT - Commander: Using this application, the user can assign shortcuts (short texts) for various links/URLs. These short texts will be typed into a Textbox to then launch/go to the target (similar to the "Run" program in Windows).

    Read the article

  • Using the ASP.NET Cache to cache data in a Model or Business Object layer, without a dependency on System.Web in the layer - Part One.

    - by Rhames
    ASP.NET applications can make use of the System.Web.Caching.Cache object to cache data and prevent repeated expensive calls to a database or other store. However, ideally an application should make use of caching at the point where data is retrieved from the database, which typically is inside a Business Objects or Model layer. One of the key features of using a UI pattern such as Model-View-Presenter (MVP) or Model-View-Controller (MVC) is that the Model and Presenter (or Controller) layers are developed without any knowledge of the UI layer. Introducing a dependency on System.Web into the Model layer would break this independence of the Model from the View. This article gives a solution to this problem, using dependency injection to inject the caching implementation into the Model layer at runtime. This allows caching to be used within the Model layer, without any knowledge of the actual caching mechanism that will be used. Create a sample application to use the caching solution Create a test SQL Server database This solution uses a SQL Server database with the same Sales data used in my previous post on calculating running totals. The advantage of using this data is that it gives nice slow queries that will exaggerate the effect of using caching! To create the data, first create a new SQL database called CacheSample. Next run the following script to create the Sale table and populate it: USE CacheSample GO   CREATE TABLE Sale(DayCount smallint, Sales money) CREATE CLUSTERED INDEX ndx_DayCount ON Sale(DayCount) go INSERT Sale VALUES (1,120) INSERT Sale VALUES (2,60) INSERT Sale VALUES (3,125) INSERT Sale VALUES (4,40)   DECLARE @DayCount smallint, @Sales money SET @DayCount = 5 SET @Sales = 10   WHILE @DayCount < 5000  BEGIN  INSERT Sale VALUES (@DayCount,@Sales)  SET @DayCount = @DayCount + 1  SET @Sales = @Sales + 15  END Next create a stored procedure to calculate the running total, and return a specified number of rows from the Sale table, using the following script: USE [CacheSample] GO   SET ANSI_NULLS ON GO   SET QUOTED_IDENTIFIER ON GO   -- ============================================= -- Author:        Robin -- Create date: -- Description:   -- ============================================= CREATE PROCEDURE [dbo].[spGetRunningTotals]       -- Add the parameters for the stored procedure here       @HighestDayCount smallint = null AS BEGIN       -- SET NOCOUNT ON added to prevent extra result sets from       -- interfering with SELECT statements.       SET NOCOUNT ON;         IF @HighestDayCount IS NULL             SELECT @HighestDayCount = MAX(DayCount) FROM dbo.Sale                   DECLARE @SaleTbl TABLE (DayCount smallint, Sales money, RunningTotal money)         DECLARE @DayCount smallint,                   @Sales money,                   @RunningTotal money         SET @RunningTotal = 0       SET @DayCount = 0         DECLARE rt_cursor CURSOR       FOR       SELECT DayCount, Sales       FROM Sale       ORDER BY DayCount         OPEN rt_cursor         FETCH NEXT FROM rt_cursor INTO @DayCount,@Sales         WHILE @@FETCH_STATUS = 0 AND @DayCount <= @HighestDayCount        BEGIN        SET @RunningTotal = @RunningTotal + @Sales        INSERT @SaleTbl VALUES (@DayCount,@Sales,@RunningTotal)        FETCH NEXT FROM rt_cursor INTO @DayCount,@Sales        END         CLOSE rt_cursor       DEALLOCATE rt_cursor         SELECT DayCount, Sales, RunningTotal       FROM @SaleTbl   END   GO   Create the Sample ASP.NET application In Visual Studio create a new solution and add a class library project called CacheSample.BusinessObjects and an ASP.NET web application called CacheSample.UI. The CacheSample.BusinessObjects project will contain a single class to represent a Sale data item, with all the code to retrieve the sales from the database included in it for simplicity (normally I would at least have a separate Repository or other object that is responsible for retrieving data, and probably a data access layer as well, but for this sample I want to keep it simple). The C# code for the Sale class is shown below: using System; using System.Collections.Generic; using System.Data; using System.Data.SqlClient;   namespace CacheSample.BusinessObjects {     public class Sale     {         public Int16 DayCount { get; set; }         public decimal Sales { get; set; }         public decimal RunningTotal { get; set; }           public static IEnumerable<Sale> GetSales(int? highestDayCount)         {             List<Sale> sales = new List<Sale>();               SqlParameter highestDayCountParameter = new SqlParameter("@HighestDayCount", SqlDbType.SmallInt);             if (highestDayCount.HasValue)                 highestDayCountParameter.Value = highestDayCount;             else                 highestDayCountParameter.Value = DBNull.Value;               string connectionStr = System.Configuration.ConfigurationManager .ConnectionStrings["CacheSample"].ConnectionString;               using(SqlConnection sqlConn = new SqlConnection(connectionStr))             using (SqlCommand sqlCmd = sqlConn.CreateCommand())             {                 sqlCmd.CommandText = "spGetRunningTotals";                 sqlCmd.CommandType = CommandType.StoredProcedure;                 sqlCmd.Parameters.Add(highestDayCountParameter);                   sqlConn.Open();                   using (SqlDataReader dr = sqlCmd.ExecuteReader())                 {                     while (dr.Read())                     {                         Sale newSale = new Sale();                         newSale.DayCount = dr.GetInt16(0);                         newSale.Sales = dr.GetDecimal(1);                         newSale.RunningTotal = dr.GetDecimal(2);                           sales.Add(newSale);                     }                 }             }               return sales;         }     } }   The static GetSale() method makes a call to the spGetRunningTotals stored procedure and then reads each row from the returned SqlDataReader into an instance of the Sale class, it then returns a List of the Sale objects, as IEnnumerable<Sale>. A reference to System.Configuration needs to be added to the CacheSample.BusinessObjects project so that the connection string can be read from the web.config file. In the CacheSample.UI ASP.NET project, create a single web page called ShowSales.aspx, and make this the default start up page. This page will contain a single button to call the GetSales() method and a label to display the results. The html mark up and the C# code behind are shown below: ShowSales.aspx <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="ShowSales.aspx.cs" Inherits="CacheSample.UI.ShowSales" %>   <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">   <html xmlns="http://www.w3.org/1999/xhtml"> <head runat="server">     <title>Cache Sample - Show All Sales</title> </head> <body>     <form id="form1" runat="server">     <div>         <asp:Button ID="btnTest1" runat="server" onclick="btnTest1_Click"             Text="Get All Sales" />         &nbsp;&nbsp;&nbsp;         <asp:Label ID="lblResults" runat="server"></asp:Label>         </div>     </form> </body> </html>   ShowSales.aspx.cs using System; using System.Collections.Generic; using System.Linq; using System.Web; using System.Web.UI; using System.Web.UI.WebControls;   using CacheSample.BusinessObjects;   namespace CacheSample.UI {     public partial class ShowSales : System.Web.UI.Page     {         protected void Page_Load(object sender, EventArgs e)         {         }           protected void btnTest1_Click(object sender, EventArgs e)         {             System.Diagnostics.Stopwatch stopWatch = new System.Diagnostics.Stopwatch();             stopWatch.Start();               var sales = Sale.GetSales(null);               var lastSales = sales.Last();               stopWatch.Stop();               lblResults.Text = string.Format( "Count of Sales: {0}, Last DayCount: {1}, Total Sales: {2}. Query took {3} ms", sales.Count(), lastSales.DayCount, lastSales.RunningTotal, stopWatch.ElapsedMilliseconds);         }       } }   Finally we need to add a connection string to the CacheSample SQL Server database, called CacheSample, to the web.config file: <?xmlversion="1.0"?>   <configuration>    <connectionStrings>     <addname="CacheSample"          connectionString="data source=.\SQLEXPRESS;Integrated Security=SSPI;Initial Catalog=CacheSample"          providerName="System.Data.SqlClient" />  </connectionStrings>    <system.web>     <compilationdebug="true"targetFramework="4.0" />  </system.web>   </configuration>   Run the application and click the button a few times to see how long each call to the database takes. On my system, each query takes about 450ms. Next I shall look at a solution to use the ASP.NET caching to cache the data returned by the query, so that subsequent requests to the GetSales() method are much faster. Adding Data Caching Support I am going to create my caching support in a separate project called CacheSample.Caching, so the next step is to add a class library to the solution. We shall be using the application configuration to define the implementation of our caching system, so we need a reference to System.Configuration adding to the project. ICacheProvider<T> Interface The first step in adding caching to our application is to define an interface, called ICacheProvider, in the CacheSample.Caching project, with methods to retrieve any data from the cache or to retrieve the data from the data source if it is not present in the cache. Dependency Injection will then be used to inject an implementation of this interface at runtime, allowing the users of the interface (i.e. the CacheSample.BusinessObjects project) to be completely unaware of how the caching is actually implemented. As data of any type maybe retrieved from the data source, it makes sense to use generics in the interface, with a generic type parameter defining the data type associated with a particular instance of the cache interface implementation. The C# code for the ICacheProvider interface is shown below: using System; using System.Collections.Generic;   namespace CacheSample.Caching {     public interface ICacheProvider     {     }       public interface ICacheProvider<T> : ICacheProvider     {         T Fetch(string key, Func<T> retrieveData, DateTime? absoluteExpiry, TimeSpan? relativeExpiry);           IEnumerable<T> Fetch(string key, Func<IEnumerable<T>> retrieveData, DateTime? absoluteExpiry, TimeSpan? relativeExpiry);     } }   The empty non-generic interface will be used as a type in a Dictionary generic collection later to store instances of the ICacheProvider<T> implementation for reuse, I prefer to use a base interface when doing this, as I think the alternative of using object makes for less clear code. The ICacheProvider<T> interface defines two overloaded Fetch methods, the difference between these is that one will return a single instance of the type T and the other will return an IEnumerable<T>, providing support for easy caching of collections of data items. Both methods will take a key parameter, which will uniquely identify the cached data, a delegate of type Func<T> or Func<IEnumerable<T>> which will provide the code to retrieve the data from the store if it is not present in the cache, and absolute or relative expiry policies to define when a cached item should expire. Note that at present there is no support for cache dependencies, but I shall be showing a method of adding this in part two of this article. CacheProviderFactory Class We need a mechanism of creating instances of our ICacheProvider<T> interface, using Dependency Injection to get the implementation of the interface. To do this we shall create a CacheProviderFactory static class in the CacheSample.Caching project. This factory will provide a generic static method called GetCacheProvider<T>(), which shall return instances of ICacheProvider<T>. We can then call this factory method with the relevant data type (for example the Sale class in the CacheSample.BusinessObject project) to get a instance of ICacheProvider for that type (e.g. call CacheProviderFactory.GetCacheProvider<Sale>() to get the ICacheProvider<Sale> implementation). The C# code for the CacheProviderFactory is shown below: using System; using System.Collections.Generic;   using CacheSample.Caching.Configuration;   namespace CacheSample.Caching {     public static class CacheProviderFactory     {         private static Dictionary<Type, ICacheProvider> cacheProviders = new Dictionary<Type, ICacheProvider>();         private static object syncRoot = new object();           ///<summary>         /// Factory method to create or retrieve an implementation of the  /// ICacheProvider interface for type <typeparamref name="T"/>.         ///</summary>         ///<typeparam name="T">  /// The type that this cache provider instance will work with  ///</typeparam>         ///<returns>An instance of the implementation of ICacheProvider for type  ///<typeparamref name="T"/>, as specified by the application  /// configuration</returns>         public static ICacheProvider<T> GetCacheProvider<T>()         {             ICacheProvider<T> cacheProvider = null;             // Get the Type reference for the type parameter T             Type typeOfT = typeof(T);               // Lock the access to the cacheProviders dictionary             // so multiple threads can work with it             lock (syncRoot)             {                 // First check if an instance of the ICacheProvider implementation  // already exists in the cacheProviders dictionary for the type T                 if (cacheProviders.ContainsKey(typeOfT))                     cacheProvider = (ICacheProvider<T>)cacheProviders[typeOfT];                 else                 {                     // There is not already an instance of the ICacheProvider in       // cacheProviders for the type T                     // so we need to create one                       // Get the Type reference for the application's implementation of       // ICacheProvider from the configuration                     Type cacheProviderType = Type.GetType(CacheProviderConfigurationSection.Current. CacheProviderType);                     if (cacheProviderType != null)                     {                         // Now get a Type reference for the Cache Provider with the                         // type T generic parameter                         Type typeOfCacheProviderTypeForT = cacheProviderType.MakeGenericType(new Type[] { typeOfT });                         if (typeOfCacheProviderTypeForT != null)                         {                             // Create the instance of the Cache Provider and add it to // the cacheProviders dictionary for future use                             cacheProvider = (ICacheProvider<T>)Activator. CreateInstance(typeOfCacheProviderTypeForT);                             cacheProviders.Add(typeOfT, cacheProvider);                         }                     }                 }             }               return cacheProvider;                 }     } }   As this code uses Activator.CreateInstance() to create instances of the ICacheProvider<T> implementation, which is a slow process, the factory class maintains a Dictionary of the previously created instances so that a cache provider needs to be created only once for each type. The type of the implementation of ICacheProvider<T> is read from a custom configuration section in the application configuration file, via the CacheProviderConfigurationSection class, which is described below. CacheProviderConfigurationSection Class The implementation of ICacheProvider<T> will be specified in a custom configuration section in the application’s configuration. To handle this create a folder in the CacheSample.Caching project called Configuration, and add a class called CacheProviderConfigurationSection to this folder. This class will extend the System.Configuration.ConfigurationSection class, and will contain a single string property called CacheProviderType. The C# code for this class is shown below: using System; using System.Configuration;   namespace CacheSample.Caching.Configuration {     internal class CacheProviderConfigurationSection : ConfigurationSection     {         public static CacheProviderConfigurationSection Current         {             get             {                 return (CacheProviderConfigurationSection) ConfigurationManager.GetSection("cacheProvider");             }         }           [ConfigurationProperty("type", IsRequired=true)]         public string CacheProviderType         {             get             {                 return (string)this["type"];             }         }     } }   Adding Data Caching to the Sales Class We now have enough code in place to add caching to the GetSales() method in the CacheSample.BusinessObjects.Sale class, even though we do not yet have an implementation of the ICacheProvider<T> interface. We need to add a reference to the CacheSample.Caching project to CacheSample.BusinessObjects so that we can use the ICacheProvider<T> interface within the GetSales() method. Once the reference is added, we can first create a unique string key based on the method name and the parameter value, so that the same cache key is used for repeated calls to the method with the same parameter values. Then we get an instance of the cache provider for the Sales type, using the CacheProviderFactory, and pass the existing code to retrieve the data from the database as the retrievalMethod delegate in a call to the Cache Provider Fetch() method. The C# code for the modified GetSales() method is shown below: public static IEnumerable<Sale> GetSales(int? highestDayCount) {     string cacheKey = string.Format("CacheSample.BusinessObjects.GetSalesWithCache({0})", highestDayCount);       return CacheSample.Caching.CacheProviderFactory. GetCacheProvider<Sale>().Fetch(cacheKey,         delegate()         {             List<Sale> sales = new List<Sale>();               SqlParameter highestDayCountParameter = new SqlParameter("@HighestDayCount", SqlDbType.SmallInt);             if (highestDayCount.HasValue)                 highestDayCountParameter.Value = highestDayCount;             else                 highestDayCountParameter.Value = DBNull.Value;               string connectionStr = System.Configuration.ConfigurationManager. ConnectionStrings["CacheSample"].ConnectionString;               using (SqlConnection sqlConn = new SqlConnection(connectionStr))             using (SqlCommand sqlCmd = sqlConn.CreateCommand())             {                 sqlCmd.CommandText = "spGetRunningTotals";                 sqlCmd.CommandType = CommandType.StoredProcedure;                 sqlCmd.Parameters.Add(highestDayCountParameter);                   sqlConn.Open();                   using (SqlDataReader dr = sqlCmd.ExecuteReader())                 {                     while (dr.Read())                     {                         Sale newSale = new Sale();                         newSale.DayCount = dr.GetInt16(0);                         newSale.Sales = dr.GetDecimal(1);                         newSale.RunningTotal = dr.GetDecimal(2);                           sales.Add(newSale);                     }                 }             }               return sales;         },         null,         new TimeSpan(0, 10, 0)); }     This example passes the code to retrieve the Sales data from the database to the Cache Provider as an anonymous method, however it could also be written as a lambda. The main advantage of using an anonymous function (method or lambda) is that the code inside the anonymous function can access the parameters passed to the GetSales() method. Finally the absolute expiry is set to null, and the relative expiry set to 10 minutes, to indicate that the cache entry should be removed 10 minutes after the last request for the data. As the ICacheProvider<T> has a Fetch() method that returns IEnumerable<T>, we can simply return the results of the Fetch() method to the caller of the GetSales() method. This should be all that is needed for the GetSales() method to now retrieve data from a cache after the first time the data has be retrieved from the database. Implementing a ASP.NET Cache Provider The final step is to actually implement the ICacheProvider<T> interface, and add the implementation details to the web.config file for the dependency injection. The cache provider implementation needs to have access to System.Web. Therefore it could be placed in the CacheSample.UI project, or in its own project that has a reference to System.Web. Implementing the Cache Provider in a separate project is my favoured approach. Create a new project inside the solution called CacheSample.CacheProvider, and add references to System.Web and CacheSample.Caching to this project. Add a class to the project called AspNetCacheProvider. Make the class a generic class by adding the generic parameter <T> and indicate that the class implements ICacheProvider<T>. The C# code for the AspNetCacheProvider class is shown below: using System; using System.Collections.Generic; using System.Linq; using System.Web; using System.Web.Caching;   using CacheSample.Caching;   namespace CacheSample.CacheProvider {     public class AspNetCacheProvider<T> : ICacheProvider<T>     {         #region ICacheProvider<T> Members           public T Fetch(string key, Func<T> retrieveData, DateTime? absoluteExpiry, TimeSpan? relativeExpiry)         {             return FetchAndCache<T>(key, retrieveData, absoluteExpiry, relativeExpiry);         }           public IEnumerable<T> Fetch(string key, Func<IEnumerable<T>> retrieveData, DateTime? absoluteExpiry, TimeSpan? relativeExpiry)         {             return FetchAndCache<IEnumerable<T>>(key, retrieveData, absoluteExpiry, relativeExpiry);         }           #endregion           #region Helper Methods           private U FetchAndCache<U>(string key, Func<U> retrieveData, DateTime? absoluteExpiry, TimeSpan? relativeExpiry)         {             U value;             if (!TryGetValue<U>(key, out value))             {                 value = retrieveData();                 if (!absoluteExpiry.HasValue)                     absoluteExpiry = Cache.NoAbsoluteExpiration;                   if (!relativeExpiry.HasValue)                     relativeExpiry = Cache.NoSlidingExpiration;                   HttpContext.Current.Cache.Insert(key, value, null, absoluteExpiry.Value, relativeExpiry.Value);             }             return value;         }           private bool TryGetValue<U>(string key, out U value)         {             object cachedValue = HttpContext.Current.Cache.Get(key);             if (cachedValue == null)             {                 value = default(U);                 return false;             }             else             {                 try                 {                     value = (U)cachedValue;                     return true;                 }                 catch                 {                     value = default(U);                     return false;                 }             }         }           #endregion       } }   The two interface Fetch() methods call a private method called FetchAndCache(). This method first checks for a element in the HttpContext.Current.Cache with the specified cache key, and if so tries to cast this to the specified type (either T or IEnumerable<T>). If the cached element is found, the FetchAndCache() method simply returns it. If it is not found in the cache, the method calls the retrievalMethod delegate to get the data from the data source, and then adds this to the HttpContext.Current.Cache. The final step is to add the AspNetCacheProvider class to the relevant custom configuration section in the CacheSample.UI.Web.Config file. To do this there needs to be a <configSections> element added as the first element in <configuration>. This will match a custom section called <cacheProvider> with the CacheProviderConfigurationSection. Then we add a <cacheProvider> element, with a type property set to the fully qualified assembly name of the AspNetCacheProvider class, as shown below: <?xmlversion="1.0"?>   <configuration>  <configSections>     <sectionname="cacheProvider" type="CacheSample.Base.Configuration.CacheProviderConfigurationSection, CacheSample.Base" />  </configSections>    <connectionStrings>     <addname="CacheSample"          connectionString="data source=.\SQLEXPRESS;Integrated Security=SSPI;Initial Catalog=CacheSample"          providerName="System.Data.SqlClient" />  </connectionStrings>    <cacheProvidertype="CacheSample.CacheProvider.AspNetCacheProvider`1, CacheSample.CacheProvider, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null">  </cacheProvider>    <system.web>     <compilationdebug="true"targetFramework="4.0" />  </system.web>   </configuration>   One point to note is that the fully qualified assembly name of the AspNetCacheProvider class includes the notation `1 after the class name, which indicates that it is a generic class with a single generic type parameter. The CacheSample.UI project needs to have references added to CacheSample.Caching and CacheSample.CacheProvider so that the actual application is aware of the relevant cache provider implementation. Conclusion After implementing this solution, you should have a working cache provider mechanism, that will allow the middle and data access layers to implement caching support when retrieving data, without any knowledge of the actually caching implementation. If the UI is not ASP.NET based, if for example it is Winforms or WPF, the implementation of ICacheProvider<T> would be written around whatever technology is available. It could even be a standalone caching system that takes full responsibility for adding and removing items from a global store. The next part of this article will show how this caching mechanism may be extended to provide support for cache dependencies, such as the System.Web.Caching.SqlCacheDependency. Another possible extension would be to cache the cache provider implementations instead of storing them in a static Dictionary in the CacheProviderFactory. This would prevent a build up of seldom used cache providers in the application memory, as they could be removed from the cache if not used often enough, although in reality there are probably unlikely to be vast numbers of cache provider implementation instances, as most applications do not have a massive number of business object or model types.

    Read the article

  • ?????create or replace???PL/SQL??

    - by Liu Maclean(???)
    ????T.Askmaclean.com?????10gR2??????procedure,?????????create or replace ??????????????????,????Oracle???????????????????procedure? ??Maclean ??2?10gR2???????????PL/SQL?????: ??1: ??Flashback Query ????,?????????????flashback database,??????????create or replace???SQL??source$??????????undo data,????????????: SQL> select * from V$version; BANNER ---------------------------------------------------------------- Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi PL/SQL Release 10.2.0.5.0 - Production CORE 10.2.0.5.0 Production TNS for Linux: Version 10.2.0.5.0 - Production NLSRTL Version 10.2.0.5.0 - Production SQL> select * from global_name; GLOBAL_NAME -------------------------------------------------------------------------------- www.oracledatabase12g.com SQL> create or replace procedure maclean_proc as   2  begin   3  execute immediate 'select 1 from dual';   4  end;   5  / Procedure created. SQL> select * from dba_source where name='MACLEAN_PROC'; OWNER      NAME                           TYPE               LINE TEXT ---------- ------------------------------ ------------ ---------- -------------------------------------------------- SYS        MACLEAN_PROC                   PROCEDURE             1 procedure maclean_proc as SYS        MACLEAN_PROC                   PROCEDURE             2 begin SYS        MACLEAN_PROC                   PROCEDURE             3 execute immediate 'select 1 from dual'; SYS        MACLEAN_PROC                   PROCEDURE             4 end; SQL> select current_scn from v$database; CURRENT_SCN -----------     2660057 create or replace procedure maclean_proc as begin -- I am new procedure execute immediate 'select 2 from dual'; end; / Procedure created. SQL> select current_scn from v$database; CURRENT_SCN -----------     2660113 SQL> select * from dba_source where name='MACLEAN_PROC'; OWNER      NAME                           TYPE               LINE TEXT ---------- ------------------------------ ------------ ---------- -------------------------------------------------- SYS        MACLEAN_PROC                   PROCEDURE             1 procedure maclean_proc as SYS        MACLEAN_PROC                   PROCEDURE             2 begin SYS        MACLEAN_PROC                   PROCEDURE             3 -- I am new procedure SYS        MACLEAN_PROC                   PROCEDURE             4 execute immediate 'select 2 from dual'; SYS        MACLEAN_PROC                   PROCEDURE             5 end; SQL> create table old_source as select * from dba_source as of scn 2660057 where name='MACLEAN_PROC'; Table created. SQL> select * from old_source where name='MACLEAN_PROC'; OWNER      NAME                           TYPE               LINE TEXT ---------- ------------------------------ ------------ ---------- -------------------------------------------------- SYS        MACLEAN_PROC                   PROCEDURE             1 procedure maclean_proc as SYS        MACLEAN_PROC                   PROCEDURE             2 begin SYS        MACLEAN_PROC                   PROCEDURE             3 execute immediate 'select 1 from dual'; SYS        MACLEAN_PROC                   PROCEDURE             4 end; ?????????scn??flashback query????,????????as of timestamp??????????,????PL/SQL????????????????undo??????????,????????????replace/drop ??????PL/SQL??? ??2 ??logminer??replace/drop PL/SQL?????SQL???DELETE??,??logminer?UNDO SQL???PL/SQL?????? ????????????????archivelog????,??????????????? minimal supplemental logging,??????????Unsupported SQLREDO???: create or replace?? ?? procedure???????SQL??????, ??????procedure????????????????, source$??????????????: SQL> ALTER DATABASE ADD SUPPLEMENTAL LOG DATA; Database altered. SQL> create or replace procedure maclean_proc as   2  begin   3  execute immediate 'select 1 from dual';   4  end;   5  / Procedure created. SQL> SQL> oradebug setmypid; Statement processed. SQL> SQL> oradebug event 10046 trace name context forever,level 12; Statement processed. SQL> SQL> create or replace procedure maclean_proc as   2  begin   3  execute immediate 'select 2 from dual';   4  end;   5  / Procedure created. SQL> oradebug tracefile_name /s01/admin/G10R25/udump/g10r25_ora_4305.trc [oracle@vrh8 ~]$ egrep  "update|insert|delete|merge"  /s01/admin/G10R25/udump/g10r25_ora_4305.trc delete from procedureinfo$ where obj#=:1 delete from argument$ where obj#=:1 delete from procedurec$ where obj#=:1 delete from procedureplsql$ where obj#=:1 delete from procedurejava$ where obj#=:1 delete from vtable$ where obj#=:1 insert into procedureinfo$(obj#,procedure#,overload#,procedurename,properties,itypeobj#) values (:1,:2,:3,:4,:5,:6) insert into argument$( obj#,procedure$,procedure#,overload#,position#,sequence#,level#,argument,type#,default#,in_out,length,precision#,scale,radix,charsetid,charsetform,properties,type_owner,type_name,type_subname,type_linkname,pls_type) values (:1,:2,:3,:4,:5,:6,:7,:8,:9,:10,:11,:12,:13,:14,:15,:16,:17,:18,:19,:20,:21,:22,:23) insert into procedureplsql$(obj#,procedure#,entrypoint#) values (:1,:2,:3) update procedure$ set audit$=:2,options=:3 where obj#=:1 delete from source$ where obj#=:1 insert into source$(obj#,line,source) values (:1,:2,:3) delete from idl_ub1$ where obj#=:1 and part=:2 and version<>:3 delete from idl_char$ where obj#=:1 and part=:2 and version<>:3 delete from idl_ub2$ where obj#=:1 and part=:2 and version<>:3 delete from idl_sb4$ where obj#=:1 and part=:2 and version<>:3 delete from ncomp_dll$ where obj#=:1 returning dllname into :2 update idl_sb4$ set piece#=:1 ,length=:2 , piece=:3 where obj#=:4 and part=:5 and piece#=:6 and version=:7 update idl_ub1$ set piece#=:1 ,length=:2 , piece=:3 where obj#=:4 and part=:5 and piece#=:6 and version=:7 update idl_char$ set piece#=:1 ,length=:2 , piece=:3 where obj#=:4 and part=:5 and piece#=:6 and version=:7 update idl_ub2$ set piece#=:1 ,length=:2 , piece=:3 where obj#=:4 and part=:5 and piece#=:6 and version=:7 delete from idl_ub1$ where obj#=:1 and part=:2 and version<>:3 delete from idl_char$ where obj#=:1 and part=:2 and version<>:3 delete from idl_ub2$ where obj#=:1 and part=:2 and version<>:3 delete from idl_sb4$ where obj#=:1 and part=:2 and version<>:3 delete from ncomp_dll$ where obj#=:1 returning dllname into :2 delete from idl_ub1$ where obj#=:1 and part=:2 and (piece#<:3 or piece#>:4) and version=:5 delete from idl_char$ where obj#=:1 and part=:2 and (piece#<:3 or piece#>:4) and version=:5 delete from idl_ub2$ where obj#=:1 and part=:2 and (piece#<:3 or piece#>:4) and version=:5 delete from idl_sb4$ where obj#=:1 and part=:2 and (piece#<:3 or piece#>:4) and version=:5 delete from idl_ub1$ where obj#=:1 and part=:2 and version<>:3 delete from idl_char$ where obj#=:1 and part=:2 and version<>:3 delete from idl_ub2$ where obj#=:1 and part=:2 and version<>:3 delete from idl_sb4$ where obj#=:1 and part=:2 and version<>:3 delete from ncomp_dll$ where obj#=:1 returning dllname into :2 update idl_sb4$ set piece#=:1 ,length=:2 , piece=:3 where obj#=:4 and part=:5 and piece#=:6 and version=:7 update idl_ub1$ set piece#=:1 ,length=:2 , piece=:3 where obj#=:4 and part=:5 and piece#=:6 and version=:7 delete from idl_char$ where obj#=:1 and part=:2 and (piece#<:3 or piece#>:4) and version=:5 delete from idl_ub2$ where obj#=:1 and part=:2 and (piece#<:3 or piece#>:4) and version=:5 delete from error$ where obj#=:1 delete from settings$ where obj# = :1 insert into settings$(obj#, param, value) values (:1, :2, :3) delete from warning_settings$ where obj# = :1 insert into warning_settings$(obj#, warning_num, global_mod, property) values (:1, :2, :3, :4) delete from dependency$ where d_obj#=:1 delete from access$ where d_obj#=:1 insert into dependency$(d_obj#,d_timestamp,order#,p_obj#,p_timestamp, property, d_attrs)values (:1,:2,:3,:4,:5,:6, :7) insert into access$(d_obj#,order#,columns,types) values (:1,:2,:3,:4) update obj$ set obj#=:6,type#=:7,ctime=:8,mtime=:9,stime=:10,status=:11,dataobj#=:13,flags=:14,oid$=:15,spare1=:16, spare2=:17 where owner#=:1 and name=:2 and namespace=:3 and(remoteowner=:4 or remoteowner is null and :4 is null)and(linkname=:5 or linkname is null and :5 is null)and(subname=:12 or subname is null and :12 is null) ?drop procedure??????source$???PL/SQL?????: SQL> oradebug setmypid; Statement processed. SQL> oradebug event 10046 trace name context forever,level 12; Statement processed. SQL> drop procedure maclean_proc; Procedure dropped. SQL> oradebug tracefile_name /s01/admin/G10R25/udump/g10r25_ora_4331.trc delete from context$ where obj#=:1 delete from dir$ where obj#=:1 delete from type_misc$ where obj#=:1 delete from library$ where obj#=:1 delete from procedure$ where obj#=:1 delete from javaobj$ where obj#=:1 delete from operator$ where obj#=:1 delete from opbinding$ where obj#=:1 delete from opancillary$ where obj#=:1 delete from oparg$ where obj# = :1 delete from com$ where obj#=:1 delete from source$ where obj#=:1 delete from idl_ub1$ where obj#=:1 and part=:2 delete from idl_char$ where obj#=:1 and part=:2 delete from idl_ub2$ where obj#=:1 and part=:2 delete from idl_sb4$ where obj#=:1 and part=:2 delete from ncomp_dll$ where obj#=:1 returning dllname into :2 delete from idl_ub1$ where obj#=:1 and part=:2 delete from idl_char$ where obj#=:1 and part=:2 delete from idl_ub2$ where obj#=:1 and part=:2 delete from idl_sb4$ where obj#=:1 and part=:2 delete from ncomp_dll$ where obj#=:1 returning dllname into :2 delete from idl_ub1$ where obj#=:1 and part=:2 delete from idl_char$ where obj#=:1 and part=:2 delete from idl_ub2$ where obj#=:1 and part=:2 delete from idl_sb4$ where obj#=:1 and part=:2 delete from ncomp_dll$ where obj#=:1 returning dllname into :2 delete from error$ where obj#=:1 delete from settings$ where obj# = :1 delete from procedureinfo$ where obj#=:1 delete from argument$ where obj#=:1 delete from procedurec$ where obj#=:1 delete from procedureplsql$ where obj#=:1 delete from procedurejava$ where obj#=:1 delete from vtable$ where obj#=:1 delete from dependency$ where d_obj#=:1 delete from access$ where d_obj#=:1 delete from objauth$ where obj#=:1 update obj$ set obj#=:6,type#=:7,ctime=:8,mtime=:9,stime=:10,status=:11,dataobj#=:13,flags=:14,oid$=:15,spare1=:16, spare2=:17 where owner#=:1 and name=:2 and namespace=:3 and(remoteowner=:4 or remoteowner is null and :4 is null)and(linkname=:5 or linkname is null and :5 is null)and(subname=:12 or subname is null and :12 is null) ??????????source$???redo: SQL> alter system switch logfile; System altered. SQL> select sequence#,name from v$archived_log where sequence#=(select max(sequence#) from v$archived_log);  SEQUENCE# ---------- NAME --------------------------------------------------------------------------------        242 /s01/flash_recovery_area/G10R25/archivelog/2012_05_21/o1_mf_1_242_7vnm13k6_.arc SQL> exec dbms_logmnr.add_logfile ('/s01/flash_recovery_area/G10R25/archivelog/2012_05_21/o1_mf_1_242_7vnm13k6_.arc',options => dbms_logmnr.new); PL/SQL procedure successfully completed. SQL> exec dbms_logmnr.start_logmnr(options => dbms_logmnr.dict_from_online_catalog); PL/SQL procedure successfully completed. SQL> select sql_redo,sql_undo from v$logmnr_contents where seg_name = 'SOURCE$' and operation='DELETE'; delete from "SYS"."SOURCE$" where "OBJ#" = '56059' and "LINE" = '1' and "SOURCE" = 'procedure maclean_proc as ' and ROWID = 'AAAABIAABAAALpyAAN'; insert into "SYS"."SOURCE$"("OBJ#","LINE","SOURCE") values ('56059','1','procedure maclean_proc as '); delete from "SYS"."SOURCE$" where "OBJ#" = '56059' and "LINE" = '2' and "SOURCE" = 'begin ' and ROWID = 'AAAABIAABAAALpyAAO'; insert into "SYS"."SOURCE$"("OBJ#","LINE","SOURCE") values ('56059','2','begin '); delete from "SYS"."SOURCE$" where "OBJ#" = '56059' and "LINE" = '3' and "SOURCE" = 'execute immediate ''select 1 from dual''; ' and ROWID = 'AAAABIAABAAALpyAAP'; insert into "SYS"."SOURCE$"("OBJ#","LINE","SOURCE") values ('56059','3','execute immediate ''select 1 from dual''; '); delete from "SYS"."SOURCE$" where "OBJ#" = '56059' and "LINE" = '4' and "SOURCE" = 'end;' and ROWID = 'AAAABIAABAAALpyAAQ'; insert into "SYS"."SOURCE$"("OBJ#","LINE","SOURCE") values ('56059','4','end;'); delete from "SYS"."SOURCE$" where "OBJ#" = '56059' and "LINE" = '1' and "SOURCE" = 'procedure maclean_proc as ' and ROWID = 'AAAABIAABAAALpyAAJ'; insert into "SYS"."SOURCE$"("OBJ#","LINE","SOURCE") values ('56059','1','procedure maclean_proc as '); delete from "SYS"."SOURCE$" where "OBJ#" = '56059' and "LINE" = '2' and "SOURCE" = 'begin ' and ROWID = 'AAAABIAABAAALpyAAK'; insert into "SYS"."SOURCE$"("OBJ#","LINE","SOURCE") values ('56059','2','begin '); delete from "SYS"."SOURCE$" where "OBJ#" = '56059' and "LINE" = '3' and "SOURCE" = 'execute immediate ''select 2 from dual''; ' and ROWID = 'AAAABIAABAAALpyAAL'; insert into "SYS"."SOURCE$"("OBJ#","LINE","SOURCE") values ('56059','3','execute immediate ''select 2 from dual''; '); delete from "SYS"."SOURCE$" where "OBJ#" = '56059' and "LINE" = '4' and "SOURCE" = 'end;' and ROWID = 'AAAABIAABAAALpyAAM'; insert into "SYS"."SOURCE$"("OBJ#","LINE","SOURCE") values ('56059','4','end;'); ???? logminer???UNDO SQL???????source$????,?DELETE????????????,????SOURCE????????????PL/SQL???DDL???

    Read the article

  • SQL Server Express 2008 R2 Installation error at Windows 7

    - by Shai Sherman
    Hello, I created install script that will install SQL Server 2008 R2 on windows XP SP3, windows vista and windows 7. One of the command that i used in the installation is for silent installation of SQL Server 2008 R2. When i install it on windows XP everything works just fine but when i try to install it on Windows 7 i get an error. What am I doing wrong? Here is the command line that i use: "Setup.exe /ConfigurationFile=Mysetup.ini" Mysetup.ini file: -------------------------------------Start of ini file --------------------------------- ;SQL SERVER 2008 R2 Configuration File ;Version 1.0, 5 May 2010 ; [SQLSERVER2008] ; Specify the Instance ID for the SQL Server features you have specified. SQL Server directory structure, registry structure, and service names will reflect the instance ID of the SQL Server instance. INSTANCEID="MSSQLSERVER" ; Specifies a Setup work flow, like INSTALL, UNINSTALL, or UPGRADE. This is a required parameter. ACTION="Install" ; Specifies features to install, uninstall, or upgrade. The list of top-level features include SQL, AS, RS, IS, and Tools. The SQL feature will install the database engine, replication, and full-text. The Tools feature will install Management Tools, Books online, Business Intelligence Development Studio, and other shared components. FEATURES=SQLENGINE ; Displays the command line parameters usage HELP="False" ; Specifies that the detailed Setup log should be piped to the console. INDICATEPROGRESS="False" ; Setup will not display any user interface. QUIET="False" ; Setup will display progress only without any user interaction. QUIETSIMPLE="True" ; Specifies that Setup should install into WOW64. This command line argument is not supported on an IA64 or a 32-bit system. ;X86="False" ; Specifies the path to the installation media folder where setup.exe is located. ;MEDIASOURCE="z:\" ; Detailed help for command line argument ENU has not been defined yet. ENU="True" ; Parameter that controls the user interface behavior. Valid values are Normal for the full UI, and AutoAdvance for a simplied UI. ; UIMODE="Normal" ; Specify if errors can be reported to Microsoft to improve future SQL Server releases. Specify 1 or True to enable and 0 or False to disable this feature. ERRORREPORTING="False" ; Specify the root installation directory for native shared components. ;INSTALLSHAREDDIR="D:\Program Files\Microsoft SQL Server" ; Specify the root installation directory for the WOW64 shared components. ;INSTALLSHAREDWOWDIR="D:\Program Files (x86)\Microsoft SQL Server" ; Specify the installation directory. ;INSTANCEDIR="D:\Program Files\Microsoft SQL Server" ; Specify that SQL Server feature usage data can be collected and sent to Microsoft. Specify 1 or True to enable and 0 or False to disable this feature. SQMREPORTING="False" ; Specify a default or named instance. MSSQLSERVER is the default instance for non-Express editions and SQLExpress for Express editions. This parameter is required when installing the SQL Server Database Engine (SQL), Analysis Services (AS), or Reporting Services (RS). INSTANCENAME="SQLEXPRESS" SECURITYMODE=SQL SAPWD=SystemAdmin ; Agent account name AGTSVCACCOUNT="NT AUTHORITY\NETWORK SERVICE" ; Auto-start service after installation. AGTSVCSTARTUPTYPE="Manual" ; Startup type for Integration Services. ;ISSVCSTARTUPTYPE="Automatic" ; Account for Integration Services: Domain\User or system account. ;ISSVCACCOUNT="NT AUTHORITY\NetworkService" ; Controls the service startup type setting after the service has been created. ;ASSVCSTARTUPTYPE="Automatic" ; The collation to be used by Analysis Services. ;ASCOLLATION="Latin1_General_CI_AS" ; The location for the Analysis Services data files. ;ASDATADIR="Data" ; The location for the Analysis Services log files. ;ASLOGDIR="Log" ; The location for the Analysis Services backup files. ;ASBACKUPDIR="Backup" ; The location for the Analysis Services temporary files. ;ASTEMPDIR="Temp" ; The location for the Analysis Services configuration files. ;ASCONFIGDIR="Config" ; Specifies whether or not the MSOLAP provider is allowed to run in process. ;ASPROVIDERMSOLAP="1" ; A port number used to connect to the SharePoint Central Administration web application. ;FARMADMINPORT="0" ; Startup type for the SQL Server service. SQLSVCSTARTUPTYPE="Automatic" ; Level to enable FILESTREAM feature at (0, 1, 2 or 3). FILESTREAMLEVEL="0" ; Set to "1" to enable RANU for SQL Server Express. ENABLERANU="1" ; Specifies a Windows collation or an SQL collation to use for the Database Engine. SQLCOLLATION="SQL_Latin1_General_CP1_CI_AS" ; Account for SQL Server service: Domain\User or system account. SQLSVCACCOUNT="NT Authority\System" ; Default directory for the Database Engine user databases. ;SQLUSERDBDIR="K:\Microsoft SQL Server\MSSQL\Data" ; Default directory for the Database Engine user database logs. ;SQLUSERDBLOGDIR="L:\Microsoft SQL Server\MSSQL\Data\Logs" ; Directory for Database Engine TempDB files. ;SQLTEMPDBDIR="T:\Microsoft SQL Server\MSSQL\Data" ; Directory for the Database Engine TempDB log files. ;SQLTEMPDBLOGDIR="T:\Microsoft SQL Server\MSSQL\Data\Logs" ; Provision current user as a Database Engine system administrator for SQL Server 2008 R2 Express. ADDCURRENTUSERASSQLADMIN="True" ; Specify 0 to disable or 1 to enable the TCP/IP protocol. TCPENABLED="1" ; Specify 0 to disable or 1 to enable the Named Pipes protocol. NPENABLED="0" ; Startup type for Browser Service. BROWSERSVCSTARTUPTYPE="Automatic" ; Specifies how the startup mode of the report server NT service. When ; Manual - Service startup is manual mode (default). ; Automatic - Service startup is automatic mode. ; Disabled - Service is disabled ;RSSVCSTARTUPTYPE="Automatic" ; Specifies which mode report server is installed in. ; Default value: “FilesOnly” ;RSINSTALLMODE="FilesOnlyMode" ; Accept SQL Server 2008 R2 license terms IACCEPTSQLSERVERLICENSETERMS="TRUE" ;setup.exe /CONFIGURATIONFILE=Mysetup.ini /INDICATEPROGRESS --------------------------- End of ini file ------------------------------------- And i get this error: 2010-08-31 18:05:53 Slp: Error result: -2068119551 2010-08-31 18:05:53 Slp: Result facility code: 1211 2010-08-31 18:05:53 Slp: Result error code: 1 2010-08-31 18:05:53 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine 2010-08-31 18:05:53 Slp: Sco: Attempting to open registry subkey 2010-08-31 18:05:53 Slp: Sco: Attempting to open registry subkey Software\Microsoft\PCHealth\ErrorReporting\DW\Installed 2010-08-31 18:05:53 Slp: Sco: Attempting to get registry value DW0200 2010-08-31 18:05:53 Slp: Submitted 1 of 1 failures to the Watson data repository What the meaning of this? What do i need to do to fix that problem? Here is the Summary file: Overall summary: Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup. Exit code (Decimal): -2068119551 Exit facility code: 1211 Exit error code: 1 Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup. Start time: 2010-08-31 18:03:44 End time: 2010-08-31 18:05:51 Requested action: Install Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20100831_180236\Detail.txt Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.50.1600.1%26EvtType%3d0x6121810A%400xC24842DB Machine Properties: Machine name: NVR Machine processor count: 2 OS version: Windows 7 OS service pack: OS region: United States OS language: English (United States) OS architecture: x86 Process architecture: 32 Bit OS clustered: No Product features discovered: Product Instance Instance ID Feature Language Edition Version Clustered Package properties: Description: SQL Server Database Services 2008 R2 ProductName: SQL Server 2008 R2 Type: RTM Version: 10 SPLevel: 0 Installation location: C:\Disk1\setupsql\x86\setup\ Installation edition: EXPRESS User Input Settings: ACTION: Install ADDCURRENTUSERASSQLADMIN: True AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE AGTSVCPASSWORD: * AGTSVCSTARTUPTYPE: Disabled ASBACKUPDIR: Backup ASCOLLATION: Latin1_General_CI_AS ASCONFIGDIR: Config ASDATADIR: Data ASDOMAINGROUP: ASLOGDIR: Log ASPROVIDERMSOLAP: 1 ASSVCACCOUNT: ASSVCPASSWORD: * ASSVCSTARTUPTYPE: Automatic ASSYSADMINACCOUNTS: ASTEMPDIR: Temp BROWSERSVCSTARTUPTYPE: Automatic CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20100831_180236\ConfigurationFile.ini CUSOURCE: ENABLERANU: True ENU: True ERRORREPORTING: False FARMACCOUNT: FARMADMINPORT: 0 FARMPASSWORD: * FEATURES: SQLENGINE FILESTREAMLEVEL: 0 FILESTREAMSHARENAME: FTSVCACCOUNT: FTSVCPASSWORD: * HELP: False IACCEPTSQLSERVERLICENSETERMS: True INDICATEPROGRESS: False INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\ INSTALLSHAREDWOWDIR: C:\Program Files\Microsoft SQL Server\ INSTALLSQLDATADIR: INSTANCEDIR: C:\Program Files\Microsoft SQL Server\ INSTANCEID: MSSQLSERVER INSTANCENAME: SQLEXPRESS ISSVCACCOUNT: NT AUTHORITY\NetworkService ISSVCPASSWORD: * ISSVCSTARTUPTYPE: Automatic NPENABLED: 0 PASSPHRASE: * PCUSOURCE: PID: * QUIET: False QUIETSIMPLE: True ROLE: AllFeatures_WithDefaults RSINSTALLMODE: FilesOnlyMode RSSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE RSSVCPASSWORD: * RSSVCSTARTUPTYPE: Automatic SAPWD: * SECURITYMODE: SQL SQLBACKUPDIR: SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS SQLSVCACCOUNT: NT Authority\System SQLSVCPASSWORD: * SQLSVCSTARTUPTYPE: Automatic SQLSYSADMINACCOUNTS: SQLTEMPDBDIR: SQLTEMPDBLOGDIR: SQLUSERDBDIR: SQLUSERDBLOGDIR: SQMREPORTING: False TCPENABLED: 1 UIMODE: AutoAdvance X86: False Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20100831_180236\ConfigurationFile.ini Detailed results: Feature: Database Engine Services Status: Failed: see logs for details MSI status: Passed Configuration status: Failed: see details below Configuration error code: 0x0A2FBD17@1211@1 Configuration error description: The process cannot access the file because it is being used by another process. Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20100831_180236\Detail.txt Rules with failures: Global rules: Scenario specific rules: Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20100831_180236\SystemConfigurationCheck_Report.htm What should I do and why does this problem occur? Thanks , Shai.

    Read the article

< Previous Page | 406 407 408 409 410 411 412  | Next Page >