Search Results

Search found 10931 results on 438 pages for 'struts config'.

Page 410/438 | < Previous Page | 406 407 408 409 410 411 412 413 414 415 416 417  | Next Page >

• OpenVPN - client-to-client traffic working in one direction but not the other

  - by user42055

  I have the following VPN configuration: +------------+ +------------+ +------------+ | outpost |----------------| kino |----------------| guchuko | +------------+ +------------+ +------------+ OS: FreeBSD 6.2 OS: Gentoo 2.6.32 OS: Gentoo 2.6.33.3 Keyname: client3 Keyname: server Keyname: client1 eth0: 10.0.1.254 eth0: 203.x.x.x eth0: 192.168.0.6 tun0: 192.168.150.18 tun0: 192.168.150.1 tun0: 192.168.150.10 P-t-P: 192.166.150.17 P-t-P: 192.168.150.2 P-t-P: 192.168.150.9 Kino is the server and has client-to-client enabled. All three machines have ip forwarding enabled, by this on the gentoo boxes: net.ipv4.conf.all.forwarding = 1 And this on the FreeBSD box: net.inet.ip.forwarding: 1 In the server's "ccd" directory is the following files: client1: iroute 192.168.0.0 255.255.255.0 client3: iroute 10.0.1.0 255.255.255.0 The server config has these routes configured: push "route 192.168.0.0 255.255.255.0" push "route 10.0.1.0 255.255.255.0" route 192.168.0.0 255.255.255.0 route 10.0.1.0 255.255.255.0 Kino's routing table looks like this: 192.168.150.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 10.0.1.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 192.168.0.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 192.168.150.2 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 Outpost's like this: 192.168.150 192.168.150.17 UGS 0 17 tun0 192.168.0 192.168.150.17 UGS 0 2 tun0 192.168.150.17 192.168.150.18 UH 3 0 tun0 And Guchuko's like this: 192.168.150.0 192.168.150.9 255.255.255.0 UG 0 0 0 tun0 10.0.1.0 192.168.150.9 255.255.255.0 UG 0 0 0 tun0 192.168.150.9 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 Now, the tests. Pings from Guchuko to Outpost's LAN IP work OK, as does the reverse - pings from Outpost to Guchuko's LAN IP. However... Pings from Outpost, to a machine on Guchuko's LAN work fine: .(( root@outpost )). (( 06:39 PM )) :: ~ :: # ping 192.168.0.3 PING 192.168.0.3 (192.168.0.3): 56 data bytes 64 bytes from 192.168.0.3: icmp_seq=0 ttl=63 time=462.641 ms 64 bytes from 192.168.0.3: icmp_seq=1 ttl=63 time=557.909 ms But a ping from Guchuko, to a machine on Outpost's LAN does not: .(( root@guchuko )). (( 06:43 PM )) :: ~ :: # ping 10.0.1.253 PING 10.0.1.253 (10.0.1.253) 56(84) bytes of data. --- 10.0.1.253 ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2000ms Guchuko's tcpdump of tun0 shows: 18:46:27.716931 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 1, length 64 18:46:28.716715 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 2, length 64 18:46:29.716714 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 3, length 64 Outpost's tcpdump on tun0 shows: 18:44:00.333341 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 3, length 64 18:44:01.334073 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 4, length 64 18:44:02.331849 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 5, length 64 So Outpost is receiving the ICMP request destined for the machine on it's subnet, but appears not be forwarding it. Outpost has gateway_enable="YES" in its rc.conf which correctly sets net.inet.ip.forwarding to 1 as mentioned earlier. As far as I know, that's all that's required to make a FreeBSD box forward packets between interfaces. Is there something else I could be forgetting ?

  Read the article

• Hanging of host network connections when starting KVM guest on bridge

  - by Chris Phillips

  Hi, I've a KVM system upon which I'm running a network bridge directly between all VM's and a bond0 (eth0, eth1) on the host OS. As such, all machines are presented on the same subnet, available outside of the box. The bond is doing mode 1 active / passive, with an arp_ip_target set to the default gateway, which has caused some issues in itself, but I can't see the bond configs mattering here myself. I'm seeing odd things most times when I stop and start a guest on the platform, in that on the host I lose network connectivity (icmp, ssh) for about 30 seconds. I don't lose connectivity on the other already running VM's though... they can always ping the default GW, but the host can't. I say "about 30 seconds" but from some tests it actually seems to be 28 seconds usually (or at least, I lose 28 pings...) and I'm wondering if this somehow relates to the bridge config. I'm not running STP on the bridge at all, and the forwarding delay is set to 1 second, path cost on the bond0 lowered to 10 and port priority of bond0 also lowered to 1. As such I don't think that the bridge should ever be able to think that bond0 is not connected just fine (as continued guest connectivity implies) yet the IP of the host, which is on the bridge device (... could that matter?? ) becomes unreachable. I'm fairly sure it's about the bridged networking, but at the same time as this happens when a VM is started there are clearly loads of other things also happening so maybe I'm way off the mark. Lack of connectivity: # ping 10.20.11.254 PING 10.20.11.254 (10.20.11.254) 56(84) bytes of data. 64 bytes from 10.20.11.254: icmp_seq=1 ttl=255 time=0.921 ms 64 bytes from 10.20.11.254: icmp_seq=2 ttl=255 time=0.541 ms type=1700 audit(1293462808.589:325): dev=vnet6 prom=256 old_prom=0 auid=42949672 95 ses=4294967295 type=1700 audit(1293462808.604:326): dev=vnet7 prom=256 old_prom=0 auid=42949672 95 ses=4294967295 type=1700 audit(1293462808.618:327): dev=vnet8 prom=256 old_prom=0 auid=42949672 95 ses=4294967295 kvm: 14116: cpu0 unimplemented perfctr wrmsr: 0x186 data 0x130079 kvm: 14116: cpu0 unimplemented perfctr wrmsr: 0xc1 data 0xffdd694a kvm: 14116: cpu0 unimplemented perfctr wrmsr: 0x186 data 0x530079 64 bytes from 10.20.11.254: icmp_seq=30 ttl=255 time=0.514 ms 64 bytes from 10.20.11.254: icmp_seq=31 ttl=255 time=0.551 ms 64 bytes from 10.20.11.254: icmp_seq=32 ttl=255 time=0.437 ms 64 bytes from 10.20.11.254: icmp_seq=33 ttl=255 time=0.392 ms brctl output of relevant bridge: # brctl showstp brdev brdev bridge id 8000.b2e1378d1396 designated root 8000.b2e1378d1396 root port 0 path cost 0 max age 19.99 bridge max age 19.99 hello time 1.99 bridge hello time 1.99 forward delay 0.99 bridge forward delay 0.99 ageing time 299.95 hello timer 0.50 tcn timer 0.00 topology change timer 0.00 gc timer 0.04 flags vnet5 (3) port id 8003 state forwarding designated root 8000.b2e1378d1396 path cost 100 designated bridge 8000.b2e1378d1396 message age timer 0.00 designated port 8003 forward delay timer 0.00 designated cost 0 hold timer 0.00 flags vnet0 (2) port id 8002 state forwarding designated root 8000.b2e1378d1396 path cost 100 designated bridge 8000.b2e1378d1396 message age timer 0.00 designated port 8002 forward delay timer 0.00 designated cost 0 hold timer 0.00 flags bond0 (1) port id 0001 state forwarding designated root 8000.b2e1378d1396 path cost 10 designated bridge 8000.b2e1378d1396 message age timer 0.00 designated port 0001 forward delay timer 0.00 designated cost 0 hold timer 0.00 flags I do see the new port listed as learning, but in line with the forward delay, only for 1 or 2 seconds when polling the brctl output on a loop. All pointers, tips or stabs in the dark appreciated.

  Read the article

• unattended-upgrades does not reboot

  - by Cheiron

  I am running Debian 7 stable with unattended-upgrades (every morning at 6 AM) to make sure I am always fully updated. I have the following config: $ cat /etc/apt/apt.conf.d/50unattended-upgrades // Automatically upgrade packages from these origin patterns Unattended-Upgrade::Origins-Pattern { // Archive or Suite based matching: // Note that this will silently match a different release after // migration to the specified archive (e.g. testing becomes the // new stable). "o=Debian,a=stable"; "o=Debian,a=stable-updates"; // "o=Debian,a=proposed-updates"; "origin=Debian,archive=stable,label=Debian-Security"; }; // List of packages to not update Unattended-Upgrade::Package-Blacklist { // "vim"; // "libc6"; // "libc6-dev"; // "libc6-i686"; }; // This option allows you to control if on a unclean dpkg exit // unattended-upgrades will automatically run // dpkg --force-confold --configure -a // The default is true, to ensure updates keep getting installed //Unattended-Upgrade::AutoFixInterruptedDpkg "false"; // Split the upgrade into the smallest possible chunks so that // they can be interrupted with SIGUSR1. This makes the upgrade // a bit slower but it has the benefit that shutdown while a upgrade // is running is possible (with a small delay) //Unattended-Upgrade::MinimalSteps "true"; // Install all unattended-upgrades when the machine is shuting down // instead of doing it in the background while the machine is running // This will (obviously) make shutdown slower //Unattended-Upgrade::InstallOnShutdown "true"; // Send email to this address for problems or packages upgrades // If empty or unset then no email is sent, make sure that you // have a working mail setup on your system. A package that provides // 'mailx' must be installed. E.g. "[email protected]" Unattended-Upgrade::Mail "root"; // Set this value to "true" to get emails only on errors. Default // is to always send a mail if Unattended-Upgrade::Mail is set Unattended-Upgrade::MailOnlyOnError "true"; // Do automatic removal of new unused dependencies after the upgrade // (equivalent to apt-get autoremove) //Unattended-Upgrade::Remove-Unused-Dependencies "false"; // Automatically reboot *WITHOUT CONFIRMATION* if a // the file /var/run/reboot-required is found after the upgrade Unattended-Upgrade::Automatic-Reboot "true"; // Use apt bandwidth limit feature, this example limits the download // speed to 70kb/sec //Acquire::http::Dl-Limit "70"; As you can see Automatic-Reboot is true and thus the server should automaticly reboot. Last time I checked the server was online for over 100 days, which means that the update from Debian 7.1 to Debian 7.2 has happened while the server was up (and indeed, all updates were installed), but this involves kernel updates, which means that the server should reboot. It did not. The server was running very slow, so I rebooted which fixed that. I did some research and found out that unattended-upgrades responds to the reboot-required file in /var/run/. I touched this file and waited one week, the file still exists and the server did not reboot. So I think that unattended-uppgrades ignores the auto-reboot part. So, am I doing somthing wrong here? Why did the server not restart? The upgrade part works perfect by the way, its just the reboot part that does not seem to work as it should.

  Read the article

• Apache, ISPConfig & Roundcube alias

  - by Jay Zus

  I'm using ISPConfig to setup all the websites on my server but I also like to try to fiddle with the files myself to see how it works. Like you guessed, yes, I've broken something. I can't access my webmail setup by default on the server with the alias /webmail (I access it via the http://xxx.xxx.xx.xx/webmail) Firefox tells me that The page isn't redirecting properly Firefox has detected that the server is redirecting the request for this address in a way that will never complete. So I cleaned up my vhost files and the one of my websites work as intended, I think that the problem comes from my default.vhost. Here's the content of it <Directory /var/www/> AllowOverride None Order Deny,Allow Deny from all </Directory> <VirtualHost *:80> DocumentRoot /var/www/ ServerAdmin [email protected] <Directory /var/www/> Options FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> This isn't a lot and I can't really see what's wrong with it, all I know is that it isn't the one that came with ISPConfig and I can't find an original one. Here's the roundcube.conf that loads with apache # Those aliases do not work properly with several hosts on your apache server # Uncomment them to use it or adapt them to your configuration # Alias /roundcube/program/js/tiny_mce/ /usr/share/tinymce/www/ # Alias /roundcube /var/lib/roundcube Alias /webmail /var/lib/roundcube/ # Access to tinymce files <Directory "/usr/share/tinymce/www/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order allow,deny allow from all </Directory> <Directory /var/lib/roundcube/> Options +FollowSymLinks # This is needed to parse /var/lib/roundcube/.htaccess. See its # content before setting AllowOverride to None. AllowOverride All order allow,deny allow from all </Directory> # Protecting basic directories: <Directory /var/lib/roundcube/config> Options -FollowSymLinks AllowOverride None </Directory> <Directory /var/lib/roundcube/temp> Options -FollowSymLinks AllowOverride None Order allow,deny Deny from all </Directory> <Directory /var/lib/roundcube/logs> Options -FollowSymLinks AllowOverride None Order allow,deny Deny from all </Directory> I didn't touch that file, but I guess it has something to do with the problem. I just can't find why it doesn't work. EDIT: This is the errors in my apache's log [21/Jun/2013:21:10:54 +0200] "GET /webmail/ HTTP/1.1" 302 540 "-" "Mozilla/5.0 (Windows NT 6.1; WOW64; rv:21.0) Gecko/20100101 Firefox/21.0" [21/Jun/2013:21:10:54 +0200] "GET /webmail/ HTTP/1.1" 302 475 "-" "Mozilla/5.0 (Windows NT 6.1; WOW64; rv:21.0) Gecko/20100101 Firefox/21.0" [21/Jun/2013:21:10:54 +0200] "GET /webmail/ HTTP/1.1" 302 475 "-" "Mozilla/5.0 (Windows NT 6.1; WOW64; rv:21.0) Gecko/20100101 Firefox/21.0" [21/Jun/2013:21:10:54 +0200] "GET /webmail/ HTTP/1.1" 302 475 "-" "Mozilla/5.0 (Windows NT 6.1; WOW64; rv:21.0) Gecko/20100101 Firefox/21.0" [21/Jun/2013:21:10:54 +0200] "GET /webmail/ HTTP/1.1" 302 475 "-" "Mozilla/5.0 (Windows NT 6.1; WOW64; rv:21.0) Gecko/20100101 Firefox/21.0" [21/Jun/2013:21:10:54 +0200] "GET /webmail/ HTTP/1.1" 302 475 "-" "Mozilla/5.0 (Windows NT 6.1; WOW64; rv:21.0) Gecko/20100101 Firefox/21.0" [21/Jun/2013:21:10:54 +0200] "GET /webmail/ HTTP/1.1" 302 475 "-" "Mozilla/5.0 (Windows NT 6.1; WOW64; rv:21.0) Gecko/20100101 Firefox/21.0"

  Read the article

• DRBD not syncing between my nodes when IP is reset

  - by ramdaz

  I am trying to setup DRBD by following the article at http://www.howtoforge.com/setting-up-network-raid1-with-drbd-on-ubuntu-11.10-p2 I am using Ubuntu 10.04 DRBD - 8.3.11 In the first run I had everything working perfectly and when shifting the systems to a production environment I decided to restart the Meta Data creation part and start from scratch. The IPs had changed entirely in the production environment. Issuing drdbadm create-md r0 in both the servers runs successfully. But when I do "drbdadm -- --overwrite-data-of-peer primary all" on the primary it fails to start the re sync. My config file is as given below resource r0 { protocol C; syncer { rate 50M; } startup { wfc-timeout 15; degr-wfc-timeout 60; } net { cram-hmac-alg sha1; shared-secret "aklsadkjlhdbskjndsf8738734jkfkjfkjf"; } on primaryds { device /dev/drbd0; disk /dev/md2; address 172.16.7.1:7788; meta-disk internal; } on secondaryds { device /dev/drbd0; disk /dev/md2; address 172.16.7.3:7788; meta-disk internal; } } Status on primary root at primaryds:~# cat /proc/drbd version: 8.3.7 (api:88/proto:86-91) GIT-hash: ea9e28dbff98e331a62bcbcc63a6135808fe2917 build by root at primaryds, 2012-05-12 15:08:01 0: cs:WFBitMapS ro:Primary/Secondary ds:UpToDate/Inconsistent C r---- ns:0 nr:0 dw:0 dr:200 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:b oos:5690352828 Status on secondary root at secondaryds:/etc/drbd.d# cat /proc/drbd version: 8.3.7 (api:88/proto:86-91) GIT-hash: ea9e28dbff98e331a62bcbcc63a6135808fe2917 build by root at secondaryds, 2012-05-12 15:25:25 0: cs:WFBitMapT ro:Secondary/Primary ds:Inconsistent/UpToDate C r---- ns:0 nr:0 dw:0 dr:0 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:b oos:5690352828 Log of Primary May 30 13:42:23 primaryds kernel: [ 1584.057076] block drbd0: role( Secondary -> Primary ) disk( Inconsistent -> UpToDate ) May 30 13:42:23 primaryds kernel: [ 1584.086264] block drbd0: Forced to consider local data as UpToDate! May 30 13:42:23 primaryds kernel: [ 1584.086303] block drbd0: Creating new current UUID May 30 13:42:26 primaryds kernel: [ 1586.405551] block drbd0: drbd_sync_handshake: May 30 13:42:26 primaryds kernel: [ 1586.405564] block drbd0: self E8A075F378173D4B:0000000000000004:0000000000000000:0000000000000000 bits:1422588207 flags:0 May 30 13:42:26 primaryds kernel: [ 1586.405574] block drbd0: peer 0000000000000004:0000000000000000:0000000000000000:0000000000000000 bits:1422588207 flags:0 May 30 13:42:26 primaryds kernel: [ 1586.405582] block drbd0: uuid_compare()=2 by rule 30 May 30 13:42:26 primaryds kernel: [ 1586.405587] block drbd0: Becoming sync source due to disk states. May 30 13:42:26 primaryds kernel: [ 1586.405592] block drbd0: Writing the whole bitmap, full sync required after drbd_sync_handshake. May 30 13:42:27 primaryds kernel: [ 1588.171638] block drbd0: 5427 GB (1422588207 bits) marked out-of-sync by on disk bit-map. May 30 13:42:27 primaryds kernel: [ 1588.172769] block drbd0: conn( Connected -> WFBitMapS ) Log in Secondary May 30 13:42:24 secondaryds kernel: [ 1563.304894] block drbd0: peer( Secondary - Primary ) pdsk( Inconsistent - UpToDate ) May 30 13:42:24 secondaryds kernel: [ 1563.339674] block drbd0: drbd_sync_handshake: May 30 13:42:24 secondaryds kernel: [ 1563.339685] block drbd0: self 0000000000000004:0000000000000000:0000000000000000:0000000000000000 bits:1422588207 flags:0 May 30 13:42:24 secondaryds kernel: [ 1563.339695] block drbd0: peer E8A075F378173D4B:0000000000000004:0000000000000000:0000000000000000 bits:1422588207 flags:0 May 30 13:42:24 secondaryds kernel: [ 1563.339703] block drbd0: uuid_compare()=-2 by rule 20 May 30 13:42:24 secondaryds kernel: [ 1563.339709] block drbd0: Becoming sync target due to disk states. May 30 13:42:24 secondaryds kernel: [ 1563.339714] block drbd0: Writing the whole bitmap, full sync required after drbd_sync_handshake. May 30 13:42:26 secondaryds kernel: [ 1565.652342] block drbd0: 5427 GB (1422588207 bits) marked out-of-sync by on disk bit-map. May 30 13:42:26 secondaryds kernel: [ 1565.652965] block drbd0: conn( Connected - WFBitMapT ) The serves are not responding once it reaches this stage. Tried redoing it couple of time but noting happens. Why could the resync not be taking place? I would like some advice? Directions?

  Read the article

• CPU/JVM/JBoss 7 slows down over time

  - by lukas

  I'm experiencing performance slow down on JBoss 7.1.1 Final. I wrote simple program that demostrates this behavior. I generate an array of 100,000 of random integers and run bubble sort on it. @Model public class PerformanceTest { public void proceed() { long now = System.currentTimeMillis(); int[] arr = new int[100000]; for(int i = 0; i < arr.length; i++) { arr[i] = (int) (Math.random() * 200000); } long now2 = System.currentTimeMillis(); System.out.println((now2 - now) + "ms took to generate array"); now = System.currentTimeMillis(); bubbleSort(arr); now2 = System.currentTimeMillis(); System.out.println((now2 - now) + "ms took to bubblesort array"); } public void bubbleSort(int[] arr) { boolean swapped = true; int j = 0; int tmp; while (swapped) { swapped = false; j++; for (int i = 0; i < arr.length - j; i++) { if (arr[i] > arr[i + 1]) { tmp = arr[i]; arr[i] = arr[i + 1]; arr[i + 1] = tmp; swapped = true; } } } } } Just after I start the server, it takes approximately 22 seconds to run this code. After few days of JBoss 7.1.1. running, it takes 330 sec to run this code. In both cases, I launch the code when the CPU utilization is very low (say, 1%). Any ideas why? I run the server with following arguments: -Xms1280m -Xmx2048m -XX:MaxPermSize=2048m -Djava.net.preferIPv4Stack=true -Dorg.jboss.resolver.warning=true -Dsun.rmi.dgc.client.gcInterval=3600000 -Dsun.rmi.dgc.server.gcInterval=3600000 -Djboss.modules.system.pkgs=org.jboss.byteman -Djava.awt.headless=true -Duser.timezone=UTC -Djboss.server.default.config=standalone-full.xml -Xrunjdwp:transport=dt_socket,address=8787,server=y,suspend=n I'm running it on Linux 2.6.32-279.11.1.el6.x86_64 with java version "1.7.0_07". It's within J2EE applicaiton. I use CDI so I have a button on JSF page that will call method "proceed" on @RequestScoped component PerformanceTest. I deploy this as separate war file and even if I undeploy other applications, it doesn't change the performance. It's a virtual machine that is sharing CPUs with another machine but that one doesn't consume anything. Here's yet another observation: when the server is after fresh start and I run the bubble sort, It utilizes 100% of one processor core. It never switches to another core or drops utilization below 95%. However after some time the server is running and I'm experiencing the performance problems, the method above is utilizing CPU core usually 100%, however I just found out from htop that this task is being switched very often to other cores. That is, at the beginning it's running on core #1, after say 2 seconds it's running on #5 then after say 2 seconds #8 etc. Furthermore, the utilization is not kept at 100% at the core but sometimes drops to 80% or even lower. For the server after fresh start, even though If I simulate a load, it never switches the task to another core.

  Read the article

• NGINX - CORS error affecting only Firefox

  - by wiherek

  this is an issue with Nginx that affects only firefox. I have this config: http://pastebin.com/q6Yeqxv9 upstream connect { server 127.0.0.1:8080; } server { server_name admin.example.com www.admin.example.com; listen 80; return 301 https://admin.example.com$request_uri; } server { listen 80; server_name ankieta.example.com www.ankieta.example.com; add_header Access-Control-Allow-Origin $http_origin; add_header 'Access-Control-Allow-Methods' 'GET, POST, OPTIONS, PUT, PATCH, DELETE'; add_header 'Access-Control-Allow-Credentials' 'true'; add_header 'Access-Control-Allow-Headers' 'Access-Control-Request-Method,Access-Control-Request-Headers,Cache,Pragma,Authorization,Accept,Accept-Encoding,Accept-Language,Host,Referer,Content-Length,Origin,DNT,X-Mx-ReqToken,Keep-Alive,User-Agent,X-Requested-With,If-Modified-Since,Cache-Control,Content-Type'; return 301 https://ankieta.example.com$request_uri; } server { server_name admin.example.com; listen 443 ssl; ssl_certificate /srv/ssl/14182263.pem; ssl_certificate_key /srv/ssl/admin_i_ankieta.example.com.key; ssl_protocols SSLv3 TLSv1; ssl_ciphers ALL:!aNULL:!ADH:!eNULL:!LOW:!EXP:RC4+RSA:+HIGH:+MEDIUM; location / { proxy_pass http://connect; } } server { server_name ankieta.example.com; listen 443 ssl; ssl_certificate /srv/ssl/14182263.pem; ssl_certificate_key /srv/ssl/admin_i_ankieta.example.com.key; ssl_protocols SSLv3 TLSv1; ssl_ciphers ALL:!aNULL:!ADH:!eNULL:!LOW:!EXP:RC4+RSA:+HIGH:+MEDIUM; root /srv/limesurvey; index index.php; add_header 'Access-Control-Allow-Origin' $http_origin; add_header 'Access-Control-Allow-Methods' 'GET, POST, OPTIONS, PUT, PATCH, DELETE'; add_header 'Access-Control-Allow-Credentials' 'true'; add_header 'Access-Control-Allow-Headers' 'Access-Control-Request-Method,Access-Control-Request-Headers,Cache,Pragma,Authorization,Accept,Accept-Encoding,Accept-Language,Host,Referer,Content-Length,Origin,DNT,X-Mx-ReqToken,Keep-Alive,User-Agent,X-Requested-With,If-Modified-Since,Cache-Control,Content-Type'; client_max_body_size 4M; location / { try_files $uri $uri/ /index.php?q=$uri&$args; } location ~ /*.php$ { fastcgi_split_path_info ^(.+\.php)(/.+)$; #NOTE: You should have "cgi.fix_pathinfo = 0;" in php.ini include fastcgi_params; fastcgi_param SCRIPT_FILENAME /srv/limesurvey$fastcgi_script_name; # fastcgi_param HTTPS $https; fastcgi_intercept_errors on; fastcgi_pass 127.0.0.1:9000; } location ~* \.(js|css|png|jpg|jpeg|gif|ico)$ { expires max; log_not_found off; } } this is basically an AngularJS app and a PHP app (LimeSurvey), served under two different domains by the same webserver (Nginx). AngularJS is in fact served by ConnectJS, which is proxied to by Nginx (ConnectJS listens only on localhost). In Firefox console I get this: Cross-Origin Request Blocked: The Same Origin Policy disallows reading the remote resource at https://ankieta.example.com/admin/remotecontrol. This can be fixed by moving the resource to the same domain or enabling CORS. which of course is annoying. Other browsers work fine (Chrome, IE). Any suggestions on this?

  Read the article

• centos6.3 varnish3.03 get the wrong backend

  - by Sola.Shawn

  I install varnish3.03 with yum! I got a problem with it my varnish config bellow:** # #backend weibo { .host = "192.168.1.178"; .port = "8080"; .connect_timeout=20s; .first_byte_timeout=20s; .between_bytes_timeout=20s; } #backend smth { .host = "192.168.1.115"; .port = "8080"; .connect_timeout=20s; .first_byte_timeout=20s; .between_bytes_timeout=20s; } #sub vcl_recv { if (req.restarts == 0) { if (req.http.x-forwarded-for) { set req.http.X-Forwarded-For = req.http.X-Forwarded-For + ", " + client.ip; } else { set req.http.X-Forwarded-For = client.ip; } } if (req.request != "GET" && req.request != "HEAD" && req.request != "PUT" && req.request != "POST" && req.request != "TRACE" && req.request != "OPTIONS" && req.request != "DELETE") { # /* Non-RFC2616 or CONNECT which is weird. */ return(pipe); } if (req.request != "GET" && req.request != "HEAD") { # /* We only deal with GET and HEAD by default */ return(pass); } if (req.http.Authorization || req.http.Cookie) { /* Not cacheable by default */ return(pass); } if (req.http.host ~ "^(hk.)?weibo.com"){ set req.http.host = "hk.weibo.com"; set req.backend = weibo; } elseif (req.http.host ~ "^(www.)?newsmth.net"){ set req.http.host = "www.newsmth.net"; set req.backend = smth; } else { error 404 "Unknown virtual host"; } return(lookup); } ##sub vcl_pipe { return(pipe); } #sub vcl_pass { return(pass); } #sub vcl_hash { hash_data(req.url); if(req.http.host) { hash_data(req.http.host); } else { hash_data(server.ip); } return(hash); } #sub vcl_hit { if(req.http.Cache-Control~"no-cache"||req.http.Cache-Control~"max-age=0"||req.http.Pragma~"no-cache"){ set obj.ttl=0s; return (restart); } return(deliver); } #sub vcl_miss { return(fetch); } #sub vcl_fetch { if (beresp.ttl <= 120s || beresp.http.Set-Cookie || beresp.http.Vary == "*") { /* * Mark as "Hit-For-Pass" for the next 2 minutes */ set beresp.ttl = 10s; return (hit_for_pass); } return(deliver); } #sub vcl_deliver { return(deliver); } #sub vcl_init { return(ok); } #sub vcl_fini { return(ok); } and my Win7's hosts file add bellow: 192.168.1.178 www.newsmth.net 192.168.1.178 hk.weibo.com start varnish varnishd -f /etc/varnish/dd.vcl -s malloc,100M -a 0.0.0.0:8000 -T 0.0.0.0:3500<br> but when I access the "hk.weibo.com:8000" it fine, and got: Hello,I am hk.weibo.com! but when access http://www.newsmth.net:8000/, got: Hello,I am hk.weibo.com! <br> My question is why it isn't "Hello,I am www.newsmth.net!"? varnish fetched the content from the wrong backend. Does anyone know how to fix this?

  Read the article

• ScriptAlias makes requests match too many Location blocks. What is going on?

  - by brain99

  We wish to restrict access on our development server to those users who have a valid SSL Client certificate. We are running Apache 2.2.16 on Debian 6. However, for some sections (mainly git-http, setup with gitolite on https://my.server/git/) we need an exception since many git clients don't support SSL client certificates. I have succeeded in requiring client cert authentication for the server, and in adding exceptions for some locations. However, it seems this does not work for git. The current setup is as follows: SSLCACertificateFile ssl-certs/client-ca-certs.crt <Location /> SSLVerifyClient require SSLVerifyDepth 2 </Location> # this works <Location /foo> SSLVerifyClient none </Location> # this does not <Location /git> SSLVerifyClient none </Location> I have also tried an alternative solution, with the same results: # require authentication everywhere except /git and /foo <LocationMatch "^/(?!git|foo)"> SSLVerifyClient require SSLVerifyDepth 2 </LocationMatch> In both these cases, a user without client certificate can perfectly access my.server/foo/, but not my.server/git/ (access is refused because no valid client certificate is given). If I disable SSL client certificate authentication completely, my.server/git/ works ok. The ScriptAlias problem Gitolite is setup using the ScriptAlias directive. I have found that the problem occurs with any similar ScriptAlias: # Gitolite ScriptAlias /git/ /path/to/gitolite-shell/ ScriptAlias /gitmob/ /path/to/gitolite-shell/ # My test ScriptAlias /test/ /path/to/test/script/ Note that /path/to/test/script is a file, not a directory, the same goes for /path/to/gitolite-shell/ My test script simply prints out the environment, super simple: #!/usr/bin/perl print "Content-type:text/plain\n\n"; print "TEST\n"; @keys = sort(keys %ENV); foreach (@keys) { print "$_ => $ENV{$_}\n"; } It seems that if I go to https://my.server/test/someLocation, that any SSLVerifyClient directives are being applied which are in Location blocks that match /test/someLocation or just /someLocation. If I have the following config: <LocationMatch "^/f"> SSLVerifyClient require SSLVerifyDepth 2 </LocationMatch> Then, the following URL requires a client certificate: https://my.server/test/foo. However, the following URL does not: https://my.server/test/somethingElse/foo Note that this only seems to apply for SSL configuration. The following has no effect whatsoever on https://my.server/test/foo: <LocationMatch "^/f"> Order allow,deny Deny from all </LocationMatch> However, it does block access to https://my.server/foo. This presents a major problem for cases where I have some project running at https://my.server/project (which has to require SSL client certificate authorization), and there is a git repository for that project at https://my.server/git/project which cannot require a SSL client certificate. Since the /git/project URL also gets matched agains /project Location blocks, such a configuration seems impossible given my current findings. Question: Why is this happening, and how do I solve my problem? In the end, I want to require SSL Client certificate authorization for the whole server except for /git and /someLocation, with as minimal configuration as possible (so I don't have to modify the configuration each time something new is deployed or a new git repository is added). Note: I rewrote my question (instead of just adding more updates at the bottom) to take into account my new findings and hopefully make this more clear.

  Read the article

• Nginx - Redirect any Subdomain to File without Rewriting

  - by Waffle

  Recently I have switched from Apache to Nginx to increase performance on a web server running Ubuntu 11.10. I have been having issues trying to figure out how certain things work in Nginx compared to Apache, but one issue has been stumping me and I have not been able to find the answer online. My problem is that I need to be able to redirect (not rewrite) any sub-domain to a file, but that file needs to be able to get the sub-domain part of the URL in order to do a database look-up of that sub-domain. So far, I have been able to get any sub-domain to rewrite to that file, but then it loses the text of the sub-domain I need. So, for example, I would like test.server.com to redirect to server.com/resolve.php, but still remain as test.server.com. If this is not possible, the thing that I would need at the very least would be something such as going to test.server.com would go to server.com/resolve.php?=test . One of these options must be possible in Nginx. My config as it stands right now looks something like this: server { listen 80; ## listen for ipv4; this line is default and implied listen [::]:80 default ipv6only=on; ## listen for ipv6 root /usr/share/nginx/www; index index.php index.html index.htm; # Make site accessible from http://localhost/ server_name www.server.com server.com; location / { # First attempt to serve request as file, then # as directory, then fall back to index.html try_files $uri $uri/ /index.html; } location /doc { root /usr/share; autoindex on; allow 127.0.0.1; } location /images { root /usr/share; autoindex off; } #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # #error_page 500 502 503 504 /50x.html; #location = /50x.html { # root /usr/share/nginx/www; #} # proxy the PHP scripts to Apache listening on 127.0.0.1:80 # #location ~ \.php$ { # proxy_pass http://127.0.0.1; #} # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # location ~ \.php$ { fastcgi_pass unix:/tmp/php5-fpm.sock; fastcgi_index index.php; include fastcgi_params; } # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # #location ~ /\.ht { # deny all; #} } server { listen 80 default; server_name *.server.com; rewrite ^ http://www.server.com/resolve.php; } As I said before, I am very new to Nginx, so I have a feeling the answer is pretty simple, but no examples online seem to deal with just redirects without rewrites or rewriting with the sub-domain section included. Any help on what to do would be most appreciated and if any one has a better idea to accomplish what I need, I am also open to ideas. Thank you very much.

  Read the article

• Forwarding rsyslog to syslog-ng, with FQDN and facility separation

  - by Joshua Miller

  I'm attempting to configure my rsyslog clients to forward messages to my syslog-ng log repository systems. Forwarding messages works "out of the box", but my clients are logging short names, not FQDNs. As a result the messages on the syslog repo use short names as well, which is a problem because one can't determine which system the message originated from easily. My clients get their names through DHCP / DNS. I've tried a number of solutions trying to get this working, but without success. I'm using rsyslog 4.6.2 and syslog-ng 3.2.5. I've tried setting $PreserveFQDN on as the first directive in /etc/rsyslog.conf (and restarting rsyslog of course). It seems to have no effect. hostname --fqdn on the client returns the proper FQDN, so the problem isn't whether the system can actually figure out its own FQDN. $LocalHostName <fqdn> looked promising, but this directive isn't available in my version of rsyslog (Available since 4.7.4+, 5.7.3+, 6.1.3+). Upgrading isn't an option at the moment. Configuring the syslog-ng server to populate names based on reverse lookups via DNS isn't an option. There are complexities with reverse DNS and the public cloud. Specifying for the forwarder to use a custom template seems like a viable option at first glance. I can specify the following, which causes local logging to begin using the FQDN on the syslog-ng repo. $template MyTemplate, "%timestamp% <FQDN> %syslogtag%%msg%" $ActionForwardDefaultTemplate MyTemplate However, when I put this in place syslog-ng seems to be unable to categorize messages by facility or priority. Messages come in as FQDN, but everything is put in to user.log. When I don't use the custom template, messages are properly categorized under facility and priority, but with the short name. So, in summary, if I manually trick rsyslog into including the FQDN, priority and facility becomes lost details to syslog-ng. How can I get rsyslog to do FQDN logging which works properly going to a syslog-ng repository? rsyslog client config: $ModLoad imuxsock.so # provides support for local system logging (e.g. via logger command) $ModLoad imklog.so # provides kernel logging support (previously done by rklogd) $ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat *.info;mail.none;authpriv.none;cron.none /var/log/messages authpriv.* /var/log/secure mail.* -/var/log/maillog cron.* /var/log/cron *.emerg * uucp,news.crit /var/log/spooler local7.* /var/log/boot.log $WorkDirectory /var/spool/rsyslog # where to place spool files $ActionQueueFileName fwdRule1 # unique name prefix for spool files $ActionQueueMaxDiskSpace 1g # 1gb space limit (use as much as possible) $ActionQueueSaveOnShutdown on # save messages to disk on shutdown $ActionQueueType LinkedList # run asynchronously $ActionResumeRetryCount -1 # infinite retries if host is down *.* @syslog-ng1.example.com *.* @syslog-ng2.example.com syslog-ng configuration (abridged for brevity): options { flush_lines (0); time_reopen (10); log_fifo_size (1000); long_hostnames (off); use_dns (no); use_fqdn (yes); create_dirs (no); keep_hostname (yes); }; source src { unix-stream("/dev/log"); internal(); udp(ip(0.0.0.0) port(514)); }; destination per_host_destination { file( "/var/log/syslog-ng/devices/$HOST/$FACILITY.log" owner("root") group("root") perm(0644) dir_owner(root) dir_group(root) dir_perm(0775) create_dirs(yes)); }; log { source(src); destination(per_facility_destination); };

  Read the article

• Just a few questions about Hyper-V virtual machines and clustering

  - by René Kåbis

  I have been using Microsoft’s Hyper-V technology for a little while now, but I am just now dipping my toe into clustering. In particular, I am trying to implement a fault-tolerant SQL DB. This involves setting up two VMs, clustering them via Failover Cluster, and then installing SQL Server in some fashion. I have two physical machines - one high-end and rather beefy “heavy lifter” to contain the majority of the VMs, and another “backup” (a repurposed desktop) to hold the essential “secondary” (or failover) AD-DC, SQL and FS VMs. The main reason why I find the failover cluster at the VM level so attractive is that it presents a single IP and DNS entry to the network as a whole - if one machine (physical or virtual) goes down, you might loose some ping and the connections get reset, but the network applications (Microsoft RMS connection to backend SQL) can still connect to a viable DB without having to mess around with the settings at all. My first question is in terms of SQL Server itself. If I have a cluster between two VMs, does it make more sense to install the SQL Server in Failover Cluster configuration or should I simply install it in a stand-alone config and mirror the DBs? For example, this post suggests just mirroring the DBs, but do I just mirror standalone DBs on standalone VMs, or can I get the network and failover benefits of clustered VMs while still utilizing (on each clustered VM) standalone DBs that have been mirrored between each other? As well, I have come across a lot of documentation about SQL clustering, but most assume a number (#2) of physical machines to hold not only the actual SQL VMs but also the Quorum and Witness stores. I will not be able to muster more than two physical machines. As such, I will have to be satisfied with a VM cluster that does not exceed two VMs (one for each physical machine). Another issue involves MSDTC - the Distributed Transaction Coordinator. When attempting to install the SQL Failover Cluster (I never completed it for this reason) it threw a hissy fit because MSDTC had not been clustered. Search as I might, I have not yet found a way to do so under Windows Server 2012 R2. I have found plenty of docs for Windows 2008 and 2008 R2, but these instructions don’t align with 2012 R2 (at least, not in a way that allows me to successfully cluster MSDTC). Plus, some of the instructions that I have found for SQL Server Failover Cluster installation suggest that a third “network device” - shared network storage (a SAN) - is required for the DB itself (and other functionality). I do not have this, and won’t be getting this. Most of my storage exists on the “heavy lifter” that was designed for all of the “primary” VMs. If that physical machine goes down, so does the storage. The secondary server does have enough resources for an AD-DC Server, an SQL server and a File Server, so it will handle the “secondary” failover versions of those VMs (clustered or not). My final question involves file servers. If I cluster file servers between two VMs (one on my “heavy lifter” and another on my “backup”, how do I mirror the data between them? Clustering VMs only provides a single point of access on the network for a resource, it doesn’t exactly replicate data between the two - that is left to the services that serve up that data. I am unsure how I can ensure that file server data between two clustered file server VMs can be properly mirrored. Remember, I only have two devices to be used here - my primary machine and a backup secondary. There is no chance of me obtaining a SAN or any other type of network attached storage. What exists on the machines must act as the storage. Thanks in advance for any suggestions.

  Read the article

• Reinstall Postfix

  - by Kevin

  I tried to reinstall Postfix, but I get this bunch of errors: root@***:/etc/init.d# sudo apt-get install -f postfix Reading package lists... Done Building dependency tree Reading state information... Done Suggested packages: procmail postfix-mysql postfix-pgsql postfix-ldap postfix-pcre resolvconf postfix-cdb mail-reader The following NEW packages will be installed: postfix 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 0B/1,389kB of archives. After this operation, 3,531kB of additional disk space will be used. Preconfiguring packages ... Selecting previously deselected package postfix. (Reading database ... 56122 files and directories currently installed.) Unpacking postfix (from .../postfix_2.7.1-1ubuntu0.1_amd64.deb) ... Processing triggers for ureadahead ... Processing triggers for ufw ... Processing triggers for man-db ... Setting up postfix (2.7.1-1ubuntu0.1) ... Configuration file `/etc/init.d/postfix' ==> File on system created by you or by a script. ==> File also in package provided by package maintainer. What would you like to do about it ? Your options are: Y or I : install the package maintainer's version N or O : keep your currently-installed version D : show the differences between the versions Z : start a shell to examine the situation The default action is to keep your current version. *** postfix (Y/I/N/O/D/Z) [default=N] ? Y Installing new version of config file /etc/init.d/postfix ... Adding group `postfix' (GID 109) ... Done. Adding system user `postfix' (UID 106) ... Adding new user `postfix' (UID 106) with group `postfix' ... Not creating home directory `/var/spool/postfix'. Creating /etc/postfix/dynamicmaps.cf Adding tcp map entry to /etc/postfix/dynamicmaps.cf Adding group `postdrop' (GID 115) ... Done. setting myhostname: ***.net setting alias maps setting alias database setting myorigin setting destinations: ***.net, localhost.***.net, , localhost setting relayhost: setting mynetworks: 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 setting mailbox_size_limit: 0 setting recipient_delimiter: + setting inet_interfaces: all Postfix is now set up with a default configuration. If you need to make changes, edit /etc/postfix/main.cf (and others) as needed. To view Postfix configuration values, see postconf(1). After modifying main.cf, be sure to run '/etc/init.d/postfix reload'. Running newaliases postalias: fatal: /etc/mailname: cannot open file: Permission denied dpkg: error processing postfix (--configure): subprocess installed post-installation script returned error exit status 1 Processing triggers for libc-bin ... ldconfig deferred processing now taking place Errors were encountered while processing: postfix E: Sub-process /usr/bin/dpkg returned an error code (1) I tried aptitude purge, remove, autoclean and all of dpkg options (configure, remove, purge) but nothing did the trick. /etc/mailname exists (0644 root:root) with as content *.net (fetched from hostname). What am I doing wrong?

  Read the article

• How to troubleshoot problem with OpenVPN Appliance Server not able to connect

  - by Peter

  1) I have a Windows Server 2008 Standard SP2 2) I am running Hyper-V and have the OpenVPN Appliance Server virtual running 3) I have configured it as it said, only issue was that the legacy network adapter does not have a setting the instructions mention "Enable spoofing of MAC Addresses". My understand is that before R2, this was on by default. 4) Server is running, web interfaces look good 5) I am trying to connect from a Vista 64 box and cannot 5a) If I set to UPD I am stuck at Authorizing and client log looks like: 10/11/09 15:00:42: INFO: OvpnConfig: connect... 10/11/09 15:00:42: INFO: Gui listen socket at 34567 10/11/09 15:00:42: INFO: sending start command to instantiator... 10/11/09 15:00:42: INFO: start 34567 ?C:\Users\Peter\AppData\Roaming\OpenVPNTech\config?02369512D0C82A04B88093022DA0226202218022A902264022AE022B? 10/11/09 15:00:42: INFO: Got line from MI->>INFO:OpenVPN Management Interface Version 1 -- type 'help' for more info 10/11/09 15:00:42: INFO: Got line from MI->>HOLD:Waiting for hold release 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: real-time state notification set to ON 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: bytecount interval changed 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: hold flag set to OFF 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: hold release succeeded 10/11/09 15:00:43: INFO: Got line from MI->>PASSWORD:Need 'Auth' username/password 10/11/09 15:00:43: INFO: Processing PASSWORD. 10/11/09 15:00:43: INFO: OvpnClient: setting need auth to true. 10/11/09 15:00:43: INFO: OvpnConfig: Setting need auth to true. 10/11/09 15:00:43: INFO: Got auth request from active_config from 0 10/11/09 15:00:47: INFO: Sending Credentials.... 10/11/09 15:00:47: INFO: Sending 25 bytes for username. 10/11/09 15:00:47: INFO: Sent 25 bytes for username. 10/11/09 15:00:47: INFO: Sending 30 bytes for password. 10/11/09 15:00:47: INFO: Sent 30 bytes for password. 10/11/09 15:00:48: INFO: Got line from MI->SUCCESS: 'Auth' username entered, but not yet verified 10/11/09 15:00:48: INFO: Got line from MI->SUCCESS: 'Auth' password entered, but not yet verified 10/11/09 15:00:48: INFO: Got line from MI->>STATE:1255287647,WAIT,,, 10/11/09 15:00:48: INFO: Got line from MI->>BYTECOUNT:0,42 10/11/09 15:00:48: INFO: Got line from MI->>BYTECOUNT:54,42 10/11/09 15:00:48: INFO: Got line from MI->>STATE:1255287648,AUTH,,, 10/11/09 15:00:50: INFO: Got line from MI->>BYTECOUNT:2560,2868 10/11/09 15:00:52: INFO: Got line from MI->>BYTECOUNT:2560,3378 5b) I setup server for tcp and try to connect, I get a loop of authorizing and reconnecting. Log looks like: 10/11/09 15:00:42: INFO: Got line from MI->>HOLD:Waiting for hold release 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: real-time state notification set to ON 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: bytecount interval changed 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: hold flag set to OFF 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: hold release succeeded 10/11/09 15:00:43: INFO: Got line from MI->>PASSWORD:Need 'Auth' username/password 10/11/09 15:00:43: INFO: Processing PASSWORD. 10/11/09 15:00:43: INFO: OvpnClient: setting need auth to true. 10/11/09 15:00:43: INFO: OvpnConfig: Setting need auth to true. 10/11/09 15:00:43: INFO: Got auth request from active_config from 0 10/11/09 15:00:47: INFO: Sending Credentials.... 10/11/09 15:00:47: INFO: Sending 25 bytes for username. 10/11/09 15:00:47: INFO: Sent 25 bytes for username. 10/11/09 15:00:47: INFO: Sending 30 bytes for password. 10/11/09 15:00:47: INFO: Sent 30 bytes for password. 10/11/09 15:00:48: INFO: Got line from MI->SUCCESS: 'Auth' username entered, but not yet verified 10/11/09 15:00:48: INFO: Got line from MI->SUCCESS: 'Auth' password entered, but not yet verified 10/11/09 15:00:48: INFO: Got line from MI->>STATE:1255287647,WAIT,,, 10/11/09 15:00:48: INFO: Got line from MI->>BYTECOUNT:0,42 10/11/09 15:00:48: INFO: Got line from MI->>BYTECOUNT:54,42 10/11/09 15:00:48: INFO: Got line from MI->>STATE:1255287648,AUTH,,, 10/11/09 15:00:50: INFO: Got line from MI->>BYTECOUNT:2560,2868 10/11/09 15:00:52: INFO: Got line from MI->>BYTECOUNT:2560,3378 10/11/09 15:00:54: INFO: Got line from MI->>BYTECOUNT:2560,3888 ... Is there anyway to turn on robust logging on the server to understand what is happening? Any ideas on how to hunt this down?

  Read the article

• Apache sends plain-text response when accessing SSL-enabled site without HTTPS

  - by animuson

  I've never encountered something such as this before. I was attempting to simply redirect the page to the HTTPS version if it determined that HTTPS was off, but instead it's displaying an HTML page rather than actually redirecting; and even odder, it's displaying it as text/plain! The VirtualHost Declaration (Sort of): ServerAdmin [email protected] DocumentRoot "/path/to/files" ServerName example.com SSLEngine On SSLCertificateFile /etc/ssh/certify/example.com.crt SSLCertificateKeyFile /etc/ssh/certify/example.com.key SSLCertificateChainFile /etc/ssh/certify/sub.class1.server.ca.pem <Directory "/path/to/files/"> AllowOverride All Options +FollowSymLinks DirectoryIndex index.php Order allow,deny Allow from all </Directory> RewriteEngine On RewriteCond %{HTTPS} off RewriteRule .* https://example.com:6161 [R=301] The Page Output: <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN"> <html><head> <title>301 Moved Permanently</title> </head><body> <h1>Moved Permanently</h1> <p>The document has moved <a href="https://example.com:6161">here</a>.</p> <hr> <address>Apache/2.2.21 (Unix) mod_ssl/2.2.21 OpenSSL/1.0.0e DAV/2 Server at example.com Port 443</address> </body></html> I've tried moving the Rewrite stuff up above the SSL stuff hoping it'd do something and nothing happens. If I view the page with via HTTPS, it displays fine like it should. It's obviously detecting that I'm trying to rewrite the path, but it's not acting. The Apache error log does not indicate anything to me that might have gone wrong. When I remove the RewriteRules: <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN"> <html><head> <title>400 Bad Request</title> </head><body> <h1>Bad Request</h1> <p>Your browser sent a request that this server could not understand.<br /> Reason: You're speaking plain HTTP to an SSL-enabled server port.<br /> Instead use the HTTPS scheme to access this URL, please.<br /> <blockquote>Hint: <a href="https://example.com/"><b>https://example.com/</b></a></blockquote></p> <p>Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.</p> <hr> <address>Apache/2.2.21 (Unix) mod_ssl/2.2.21 OpenSSL/1.0.0e DAV/2 Server at example.com Port 443</address> </body></html> I get the standard "you can't do this because you're not using SSL" response, which is also provided in text/plain rather than being rendered as HTML. This would make sense, it should only work for HTTPS-enabled connections, but I still want to redirect them to the HTTPS connection when it determines that it is not enabled. Thinking I could circumvent the system: I tried adding a ErrorDocument 400 https://example.com:6161 to the config file instead of using RewriteRules, and that just gave me a new message, still no cheese. <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN"> <html><head> <title>302 Found</title> </head><body> <h1>Found</h1> <p>The document has moved <a href="https://example.com:6161">here</a>.</p> <hr> <address>Apache/2.2.21 (Unix) mod_ssl/2.2.21 OpenSSL/1.0.0e DAV/2 Server at example.com Port 443</address> </body></html> How can I force Apache to actually redirect rather than displaying a "301" page that shows HTML in plain-text format?

  Read the article

• Using different SSDs types (not only SATA based) as system drive

  - by Hubert Kario

  Currently I have a Thinkpad X61s and want to make it both a bit faster and a bit more power efficient. For that reason I thought that adding SSD drive would make most sense. Unfortunately, because of financial reasons, buying SSD of over 200GB capacity is out of reach for me (not only it would be worth more than the rest of the laptop, but also I currently have a 500GB drive in it, so even such a drive would be kind of a downgrade for me). During preliminary testing with a cheap Transcend 4GB Class 6 (14MiB/s streaming, 9MiB/s random read) card I experienced boot times to be reduced by half so putting the OS only on it would already would be an improvement. Unfortunately, my system now is about 11GiB in size so anything less than 16GB would be constraining. In this laptop I can connect additional drives on at least 5 different ways: using SATA-ATA converter caddy in the X6 Ultrabase using internal mini PCIe slot using integrated SDHC slot using CardBus (a.k.a PCMCIA or PC Card) slot using USB Thankfully, because I use only Linux on this PC the bootability of them is irrelevant as I can put the /boot partition on internal HDD and / on any of the above mentioned Flash memories (as I already did for the SDHC test). From what I was able to research and from my own experience those options come with rather big downsides or other problems: SATA-ATA caddy It has three downsides: I have to carry the Ultrabse with me at all times (it's not really inconvenient, but those grams do add) and couldn't disconnect it when I want to disconnect the battery It makes the bay unusable for the optical drive and occasional quick access to other hard drives the only caddies I could buy have rather flaky controllers in them so putting my OS on it would hamper its stability Internal mini PCIe slot This would be an ideal solution, if only I could find real PCIe SSDs, not only devices that could talk only SATA or ATA over PCIe mechanical connection (the ones used in Dell Mini or Asus EEE). Theoretically Samsung did release such devices but I couldn't find them in retail anywhere. Integrated SDHC slot It's a nice solution with a single drawback: the fastest 16GB SDHC card on the market can only do around 35MiB/s read and 15MiB/s write while still costing like a normal 40GB SATA SSD that's 10 times faster. Not really cost-effective. CardBus (a.k.a PCMCIA or PC Card) slot Those cards are much faster than the SDHC option (there are ones that can do well over 50MiB/s read in benchmarks) and from what I could find the PCMCIA controller in my laptop does support UDMA so it should be able to deliver comparable speeds. They still cost similarly to SD cards but at least they provide streaming performance comparable to my current HDD. USB That's the worst option. Not only is it limited to 20-30MiB/s by the interface itself the drive would stick out of the laptop so it's a big no no. The question As such I think that going the "CF in a CardBus adapter" route will be the best option. My question is: did anyone try using CF cards in CardBus adapters as system drives with Linux on Thinkpad laptops? Laptops in general? What was the real-world performance? I don't have any CF cards so I can't check how well does it work with suspend/resume, or whatever it's easy to make it work in initramfs (I'm using ArchLinux and SD card was trivial — add 3 modules in single config line and rebuilding initramfs) so any tips/gotchas on this are welcome as well.

  Read the article

• File server share access intermittent/slow/machine unstable: win2k8r2

  - by Jack B.

  I have a file server running Win2k8R2 on an older HP DL380G4. It has nothing set up on it other than file sharing. All drivers/firmware/updates installed. The file server is used as a dump for a bunch of test machines - so essentially a lot of small files are being written to it. It was working fine until it started showing the following symptoms: Shares became either very slow/intermittent or could not access them at all. Logging in the the server, you could use it like normal but windows would start freezing and eventually you had to hard reboot it because nothing was responsive. After rebooting, it would work fine for 20min-2hours and then degrade into this broken state again. Some info after investigation: HP Raid Config utility shows the Raid array as functioning properly (RAID5 btw). Event log shows a bunch of DoS attacks from the test machines, saying it has disconnected the connection a. AFAIK (not part of my job) the test machines haven't changed the way they log information to this server or the amount of them hasn't increased. b. Nothing is infected, this server was scanned fully, and the test machines are re-imaged almost daily. Nothing in performance monitor shows as anything being pegged at maximum (CPU/HD/Network/RAM) I installed MS Network Monitor and it is showing a lot of traffic The server was using one gigabit Ethernet connection, I connected the second one as well with the same results. Forgot to add - one of the commonly written to dirs on the share has over 16k subdirs in it, with a crapton of small files within those dirs. Some of the OS instability was slow access to the drive which has this directory - perfmon doesn't show much activity on the HD though so I'm not sure if this crowded dir is the cause. Here is one important fact: I ran into this issue 2-3 months ago, couldn't figure it out, but I had a spare identical machine so I swapped them out (thought it was related to the machine), and now I have the same issue. Also, the computer will be stable if I turn off file sharing. So is the server just getting DoS'd by the test machines? I've never dealt with such an issue. Is instability in the server's OS common when getting DoS'd? Is there anything I can do to confirm this before telling the owners of the test machines to optimize their traffic? (I'm not sure what they'll be able to do). Is there something within Win2k8R2 that can balance the traffic across the two NICs? Any help would be appreciated. Update: Another thought - the drive with the share is RAID5 across 6 SCSI320 300GB HDs. They are near full capacity about 100GB from 1TB left. Could the amount of tiny files could be causing some weirdness with the parity in this array? I think I've read something about this in the past but I'm no expert on RAID.

  Read the article

• ovs-vsctl: "eth0" is not a valid UUID

  - by Przemek Lach

  I'm trying to setup an open v-switch inside my Ubuntu 12.04 Server VM. I have created three interfaces for this VM and I want to create a port mirror inside of the VM using these there interfaces and open v-switch. There are three Host-Only Adapters: eth0, eth1, eth2. The idea is that three other VM's will be connected to these adapters. One of these VM's will stream UDP video to eth0 and I want the vswitch'd VM to mirror those packets from eth0 onto eth1 and eth2. Each of the VM's connected to eth1 and eth2 will get the same video stream. I performed the following steps to install open v-switch: $ apt-get install python-simplejson python-qt4 python-twisted-conch automake autoconf gcc uml-utilities libtool build-essential $ apt-get install build-essential autoconf automake pkg-config $ wget http://openvswitch.org/releases/openvswitch-1.7.1.tar.gz $ tar xf http://openvswitch.org/releases/openvswitch-1.7.1.tar.gz $ cd http://openvswitch.org/releases/openvswitch-1.7.1.tar.gz $ apt-get install libssl-dev iproute tcpdump linux-headers-`uname -r` $ ./boot.sh $ ./configure - -with-linux=/lib/modules/`uname -r`/build $ make $ sudo make install After installation I configured as follows: $ insmod datapath/linux/openvswitch.ko $ sudo touch /usr/local/etc/ovs-vswitchd.conf $ mkdir -p /usr/local/etc/openvswitch $ ovsdb-tool create /usr/local/etc/openvswitch/conf.db Then I started the server: $ ovsdb-server /usr/local/etc/openvswitch/conf.db \ --remote=punix:/usr/local/var/run/openvswitch/db.sock \ --remote=db:Open_vSwitch,manager_options \ --private-key=db:SSL,private_key \ --certificate=db:SSL,certificate \ --bootstrap-ca-cert=db:SSL,ca_cert --pidfile --detach --log-file $ ovs-vsctl –no-wait init (run only once) $ ovs-vswitchd --pidfile --detach The above steps I got from this tutorial and it all worked fine. I then proceeded to add a port mirror based on the open v-switch documentation under Port Mirroring. I successfully completed the following commands: $ ovs-vsctl add-br br0 $ ovs-vsctl add-port br0 eth0 $ ovs-vsctl add-port br0 eth1 $ ovs-vsctl add-port br0 eth2 $ ifconfig eth0 promisc up $ ifconfig eth1 promisc up $ ifconfig eth2 promisc up At this point when I run ovs-vsctl show I get the following: 75bda8c2-b870-438b-9115-e36288ea1cd8 Bridge "br0" Port "br0" Interface "br0" type: internal Port "eth0" Interface "eth0" Port "eth2" Interface "eth2" Port "eth1" Interface "eth1" And when I run ifconfig I get the following: eth0 Link encap:Ethernet HWaddr 08:00:27:9f:51:ca inet6 addr: fe80::a00:27ff:fe9f:51ca/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:17 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1494 (1.4 KB) TX bytes:468 (468.0 B) eth1 Link encap:Ethernet HWaddr 08:00:27:53:02:d4 inet6 addr: fe80::a00:27ff:fe53:2d4/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:17 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1494 (1.4 KB) TX bytes:468 (468.0 B) eth2 Link encap:Ethernet HWaddr 08:00:27:cb:a5:93 inet6 addr: fe80::a00:27ff:fecb:a593/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:17 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1494 (1.4 KB) TX bytes:468 (468.0 B) eth3 Link encap:Ethernet HWaddr 08:00:27:df:bb:d8 inet addr:192.168.1.139 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:fedf:bbd8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2211 errors:0 dropped:0 overruns:0 frame:0 TX packets:1196 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:182987 (182.9 KB) TX bytes:125441 (125.4 KB) NOTE: I use eth3 as a bridge adapter for SSH'ing into the VM. So now, I think I've done everything correctly but when I try to create the bridge using the following command: $ ovs-vsctl -- set Bridge br0 mirrors=@m -- --id=@eth0 get Port eth0 -- --id=@eth1 get Port eth1 -- --id=@m create Mirror name=app1Mirror select-dst-port=eth0 select-src-port=@eth0 output-port=@eth1,eth2 I get the following error: ovs-vsctl: "eth0" is not a valid UUID I don't understand why it's not able to find the interfaces?

  Read the article

• Why don't mails show up in the recipient's mailspool?

  - by Jason

  I have postfix dovecot running with local email system on thunderbird. I have two users on by ubuntu, mailuser 1 and mailuser 2 whom i added to thunderbird. Everything went fine, except the users dont have anything on their inbox on thunderbird and sent mails dont get through. Im using maildir as well. Checking /var/log/mail.log reveals this This what is happining: Restarting postfix and dovecot and then sending mail from one user to another user... I believe this line is the problem May 30 18:31:55 postfix/smtpd[12804]: disconnect from localhost[127.0.0.1] Why is it not connecting ? What could be wrong ? /var/log/mail.log May 30 18:30:21 dovecot: imap: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill) May 30 18:30:21 dovecot: master: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill) May 30 18:30:21 dovecot: imap: Server shutting down. in=467 out=475 May 30 18:30:21 dovecot: config: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill) May 30 18:30:21 dovecot: log: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill) May 30 18:30:21 dovecot: anvil: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill) May 30 18:30:21 dovecot: master: Dovecot v2.2.9 starting up (core dumps disabled) May 30 18:30:54 dovecot: imap-login: Login: user=<mailuser2>, method=PLAIN, rip=::1, lip=::1, mpid=12638, TLS, session=<xUfQkaD66gAAAAAAAAAAAAAAAAAAAAAB> May 30 18:31:04 postfix/master[12245]: terminating on signal 15 May 30 18:31:04 postfix/master[12795]: daemon started -- version 2.11.0, configuration /etc/postfix May 30 18:31:55 postfix/postscreen[12803]: CONNECT from [127.0.0.1]:33668 to [127.0.0.1]:25 May 30 18:31:55 postfix/postscreen[12803]: WHITELISTED [127.0.0.1]:33668 May 30 18:31:55 postfix/smtpd[12804]: connect from localhost[127.0.0.1] May 30 18:31:55 postfix/smtpd[12804]: 1ED7120EB9: client=localhost[127.0.0.1] May 30 18:31:55 postfix/cleanup[12809]: 1ED7120EB9: message-id=<[email protected]> May 30 18:31:55 postfix/qmgr[12799]: 1ED7120EB9: from=<[email protected]>, size=546, nrcpt=1 (queue active) May 30 18:31:55 postfix/local[12810]: 1ED7120EB9: to=<mailuser2@mysitecom>, relay=local, delay=0.03, delays=0.02/0.01/0/0, dsn=2.0.0, status=sent (delivered to maildir) May 30 18:31:55 postfix/qmgr[12799]: 1ED7120EB9: removed May 30 18:31:55 postfix/smtpd[12804]: disconnect from localhost[127.0.0.1] May 30 18:31:55 dovecot: imap-login: Login: user=<mailuser1>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=12814, TLS, session=<sD9plaD6PgB/AAAB> This is my postfix main.cf See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. smtpd_relay_restrictions = permit_mynetworks permit_sasl_authenticated defer_unauth_destination myhostname = server mydomain = mysite.com alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = $mydomain mydestination = mysite.com #relayhost = smtp.192.168.10.1.com mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 192.168.10.0/24 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all home_mailbox = Maildir / mailbox_command= All ports are listening tcp 0 0 *:imaps *:* LISTEN tcp 0 0 *:submission *:* LISTEN tcp 0 0 *:imap2 *:* LISTEN tcp 0 0 s148134.s148134.:domain *:* LISTEN tcp 0 0 192.168.56.101:domain *:* LISTEN tcp 0 0 10.0.2.15:domain *:* LISTEN tcp 0 0 localhost:domain *:* LISTEN tcp 0 0 *:ssh *:* LISTEN tcp 0 0 *:smtp *:* LISTEN tcp 0 0 localhost:953 *:* LISTEN tcp6 0 0 [::]:imaps [::]:* LISTEN tcp6 0 0 [::]:submission [::]:* LISTEN tcp6 0 0 [::]:imap2 [::]:* LISTEN tcp6 0 0 [::]:domain [::]:* LISTEN tcp6 0 0 [::]:ssh [::]:* LISTEN tcp6 0 0 [::]:smtp [::]:* LISTEN tcp6 0 0 localhost:953 [::]:* LISTEN

  Read the article

• After each command tmux prints: ps1_update: command not found

  - by B.I.

  On Linux Ubuntu 11.04, after each command (cd, ls, vim...) successful or not, tmux prints out as a last line ps1_update: command not found. Is there any config option I am missing? Thank you very much! tmux.conf # http://lukaszwrobel.pl/blog/tmux-tutorial-split-terminal-windows-easily # just remember that after every modification, tmux must be refreshed # to take new settings into account. # This can be achieved either by restarting it or by typing in: # tmux source-file .tmux.conf # Here is a list of a few basic tmux commands: # Ctrl+b " - split pane horizontally. # Ctrl+b % - split pane vertically. # Ctrl+b arrow key - switch pane. # Hold Ctrl+b, don't release it and hold one of the arrow keys - resize pane. # !Ctrl+b c - (c)reate a new window. # !Ctrl+b n - move to the (n)ext window. # Ctrl+b p - move to the (p)revious window. # Shift+LMB - select text. # ALT+Arrows to move among panes. # rebind default prefix to C-a unbind C-b set -g prefix C-a # use ALT+Arrows to move around panes bind -n M-Left select-pane -L bind -n M-Right select-pane -R bind -n M-Up select-pane -U bind -n M-Down select-pane -D # activity monitoring setw -g monitor-activity on set -g visual-activity on # highlight current pane set-window-option -g window-status-current-bg yellow # enable pane switching with mouse set-option -g mouse-select-pane on # read bashrc source ~/.bashrc # Sane scrolling set -g terminal-overrides 'xterm*:smcup@:rmcup@' commandline print out ($(cat)user@tiki:~/.vim$ ls autoload bash_profile bashrc bundle README.md tmux.conf vimrc xmonad xmonad-ubuntu-conf xsessionrc ps1_update: command not found ($(cat)user@tiki:~/.vim$ ll total 56 drwxrwxr-x 2 user user 4096 Mar 17 10:20 autoload/ -rw-rw-r-- 1 user user 170 Mar 17 10:20 bash_profile -rw-rw-r-- 1 user user 4004 Apr 2 11:37 bashrc drwxrwxr-x 20 user user 4096 Aug 20 10:55 bundle/ -rw-rw-r-- 1 user user 11170 Aug 20 11:24 README.md -rw-rw-r-- 1 user user 1243 Mar 17 10:20 tmux.conf ps1_update: command not found ($(cat)user@tiki:~/.vim$ And the following is plain terminal output, without tmux running user@tiki:~$ ls backup_list.md Documents Dropbox examples.desktop hakers_and_painters.md~ hyundai Music projects ror Ubuntu One Videos windows.sh Desktop Downloads elif.txt hakers_and_painters.md help.txt maqola.txt Pictures Public tmp update_background.sh VirtualBox VMs user@tiki:~$ ll total 116 -rw-rw-r-- 1 user user 380 Aug 9 17:34 backup_list.md drwxr-xr-x 6 user user 4096 Jul 15 09:26 Desktop/ drwxr-xr-x 2 user user 4096 Jul 7 11:26 Documents/ drwxr-xr-x 11 user user 20480 Aug 20 13:53 Downloads/ -rwx------ 1 user user 729 May 7 14:45 update_background.sh* drwxr-xr-x 2 user user 4096 Dec 10 2013 Videos/ drwxrwxr-x 4 user user 4096 Sep 10 2013 VirtualBox VMs/ -rwxrwxr-x 1 user user 36 Jan 11 2014 windows.sh* user@tiki:~$ cd Desktop/ user@tiki:~/Desktop$ ll total 36 -rw-rw-r-- 1 user user 3388 Jul 14 17:10 daily--report.md -rw-rw-r-- 1 user user 71 Jan 28 2014 fernandez readme.md -rw-rw-r-- 1 user user 23 Jan 28 2014 fernandez readme.md~ drwx------ 4 user user 4096 Mar 23 14:02 my_docs/ drwx------ 2 user user 4096 Feb 3 2014 Origami/ drwx------ 7 user user 4096 Feb 1 2013 Plants_vs._Zombies_v1.2.0.1065/ -rwxr-xr-x 1 user user 301 Apr 15 11:28 Sky Fight.desktop* drwx------ 2 user user 4096 Feb 11 2014 webdesign/ -rwxrwxr-x 1 user user 26 Jan 11 2014 windows.sh~* user@tiki:~/Desktop$

  Read the article

• Connect to VPN from Mac on Time Capsule network

  - by Lou Franco

  I have a few clients on my network that can connect to my work VPN (Windows PPTP) when they are not on my home network. On my home network (Cable Modem with Time Capsule providing Wifi), it fails very early -- looks like it can't even establish a connection. Logs just say that it failed -- even verbose logs don't have much: I redacted the host and IP from this log, but I can ping it. Wed Feb 2 14:32:41 2011 : PPTP connecting to server 'XXX.XXX.com' (XXX.XX.XX.XX)... Wed Feb 2 14:32:41 2011 : PPTP connection established. Wed Feb 2 14:32:41 2011 : using link 0 Wed Feb 2 14:32:41 2011 : Using interface ppp0 Wed Feb 2 14:32:41 2011 : Connect: ppp0 <--> socket[34:17] Wed Feb 2 14:32:41 2011 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x543c7af8> <pcomp> <accomp>] Wed Feb 2 14:32:44 2011 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x543c7af8> <pcomp> <accomp>] Wed Feb 2 14:32:47 2011 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x543c7af8> <pcomp> <accomp>] Wed Feb 2 14:32:50 2011 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x543c7af8> <pcomp> <accomp>] Wed Feb 2 14:32:53 2011 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x543c7af8> <pcomp> <accomp>] Wed Feb 2 14:32:56 2011 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x543c7af8> <pcomp> <accomp>] Wed Feb 2 14:32:59 2011 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x543c7af8> <pcomp> <accomp>] Wed Feb 2 14:33:02 2011 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x543c7af8> <pcomp> <accomp>] Wed Feb 2 14:33:05 2011 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x543c7af8> <pcomp> <accomp>] Wed Feb 2 14:33:08 2011 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x543c7af8> <pcomp> <accomp>] Wed Feb 2 14:33:11 2011 : LCP: timeout sending Config-Requests Wed Feb 2 14:33:11 2011 : Connection terminated. Wed Feb 2 14:33:11 2011 : PPTP disconnecting... Wed Feb 2 14:33:11 2011 : PPTP disconnected Others can get to the VPN and I can too, but not on my network. The only clue I have seen in other forums is to set the NAT default host on the Time Capsule -- I set this to the IP that my mac got over DHCP. I made sure that my Mac gets a different range of IP addresses that it would get if it connected to the VPN (192.168.1.x vs. 10.0.0.x). Not using any VPN client -- just Network System Preferences. It has worked in the past -- but it was a while ago, so I can't pinpoint a change. My sysadmin doesn't even see incoming connections to the VPN (nothing logged about me when I connect). Looking for any diagnostic advice at all

  Read the article

• Linux: Apple Wireless A1314 Fn key not registered, looks like software bug

  - by ramplank

  I'm trying to set up my Apple Wireless Keyboard with my Kubuntu systems. These are PC hardware powered by Intel Atom and Intel i5 respectively. The keyboard has a US keyboard layout and has model number A1314 written on the back. It takes two AA batteries. I'm saying that because it appears there are multiple types of model A1314. I have tried this on a 10.04, 11.04, 11.10 and 12.04 system with no success. Every time using a bluetooth dongle and the KDE bluetooth notification tray applet, the keyboard can be connected. In both cases it shows up as "Apple Wireless Keyboard". Almost everything works as expected, in fact, I'm typing on it right now. But one thing doesn't: The Fn key. I'd like to use Fn + Down Arrow as PgDn / Page Down, I understand this is default behaviour on Apple keyboards. And of course I'd like the same for Page Up, Home and End. I'll stick to Page Down in my example. I used the xev tool to see the keycodes the system receives, and if I press on Fn nothing happens, and nothing is registered. If I press Fn + Down Arrow, xev only registers the down arrow. Here's the output from my 11.04 system to illustrate: Press just the Fn key: no output Press Down Arrow key: KeyPress event, serial 36, synthetic NO, window 0x4400001, root 0x15d, subw 0x4400002, time 2699773, (44,45), root:(1352,298), state 0x10, keycode 116 (keysym 0xff54, Down), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False KeyRelease event, serial 36, synthetic NO, window 0x4400001, root 0x15d, subw 0x4400002, time 2699860, (44,45), root:(1352,298), state 0x10, keycode 116 (keysym 0xff54, Down), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False Press Fn+Down Arrow Keys together: KeyPress event, serial 36, synthetic NO, window 0x4400001, root 0x15d, subw 0x4400002, time 2701548, (44,45), root:(1352,298), state 0x10, keycode 116 (keysym 0xff54, Down), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False KeyRelease event, serial 36, synthetic NO, window 0x4400001, root 0x15d, subw 0x4400002, time 2701623, (44,45), root:(1352,298), state 0x10, keycode 116 (keysym 0xff54, Down), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False I've been searching this forum and other Linux-related forums for hours but I still have not found a solution. I mostly found advice on how to fix this when using an actual apple laptop or desktop, but I don't have that. They said to try something like the following echo 2 > /sys/module/hid_apple/ ... But since there's no hid_apple directory present on my systems, I've needed to modprobe hid_apple first. That didn't help either. I'm cool with changing some config files, or compiling my own patched kernel if that's necessary. I currently have a 10.04 and 12.04 system available to test. The same issue occurs when hooked up to Windows 7. Fn key still does nothing, not by itself or in combination with other keys. With some AutoHotkey fiddling, I was able to confirm the key is registered as pressed, but ignored by default. A custom AutoHotkey script can fix that. But AutoHotkey is only for Windows, I want my problem fixed on Linux. Hooked up to an iPad 2 it only works in combination with the F1-F12 keys. Not with the arrow keys. If the screen of the ipad is off, and I press just the Fn key, the screen will come on, so the key itself is registered as pressed. So to sum up my question: Can anyone help me get Page Up, Page Down, Home and End to work on this keyboard, when that requires me to use an Fn key which is currently not registered?

  Read the article

• Where is my VMware-ws FreeNAS CIFS(ZFS) bottle-neck?

  - by maka

  Background: I'm building a quiet HTPC + NAS that is also supposed to be used for general computer usage. I'm so far generally happy with things, it was just that I was expecting a little better IO performance. I have no clue if my expectations are unreal. The NAS is there as a general purpose file storage and as a media server for XBMC and other devices. ZFS is a requirement. Question: Where is my bottle-neck, and is there anything I can do config wise, to improve my performance? I'm thinking VM-disk settings could be something but I really have no idea where to go since I'm neither experienced with FreeNAS nor VMware-WS. Tests: When I'm on the host OS and copy files (from the SSD) to the CIFS share, I get around 30 Mbytes/sec read and write. When I'm on my laptop laptop, wired to the network, I get about the same specs. The test I've done are with a 16 GB ISO, and with about 200 MB of RARs and I've tried avoiding the RAM-cache by reading different files than the ones I'm writing ( 10 GB). It feels like having less CPU cores is a lot more efficient, since the resource manager in Windows reports less CPU-usage. With 4 cores in VMware, CPU usage was 50-80%, with 1 core it was 25-60%. EDIT: HD ActiveTime was quite high on SSD so I moved the page file, disabled hibernate and enabled Win DiskCache both on SSD and RAID. This resulted in no real performance difference for one file, but if i transferred 2 files the total speed went up to 50 Mbytes/s vs ~40. The ActiveTime avg also went down a lot (to ~20%) but has now higher bursts. DiskIO is on ~ 30-35 Mbytes/s avgs, with ~100Mb bursts. Network is on 200-250Mbits/s with ~45 active TCP connections. Hardware Asus F2A85-M Pro A10-5700 16GB DDR3 1600 OCZ Vertex 2 128GB SSD 2x Generic 1tb 7200 RPM drives as RAID0 (in win7) Intel Gigabit Desktop CT Software Host OS: Win7 (SSD) VMware Worksation 9 (SSD) FreeNAS 8.3 VM (20GB VDisk on SSD) CPU: I've tried 1, 2 and 4 cores. Virtualisation engine, Preferred mode: Automatic 10,24Gb ram 50Gb SCSI VDisk on the RAID0, VDisk is formatted as ZFS and exposed through CIFS through FreeNAS. NIC Bridge, Replicate physical network state Below are two typical process print-outs while I'm transfering one file to the CIFS share. last pid: 2707; load averages: 0.60, 0.43, 0.24 up 0+00:07:05 00:34:26 32 processes: 2 running, 30 sleeping Mem: 101M Active, 53M Inact, 1620M Wired, 2188K Cache, 149M Buf, 8117M Free Swap: 4096M Total, 4096M Free PID USERNAME THR PRI NICE SIZE RES STATE TIME WCPU COMMAND 2640 root 1 102 0 50164K 10364K RUN 0:25 25.98% smbd 1897 root 6 44 0 168M 74808K uwait 0:02 0.00% python last pid: 2746; load averages: 0.93, 0.60, 0.33 up 0+00:08:53 00:36:14 33 processes: 2 running, 31 sleeping Mem: 101M Active, 53M Inact, 4722M Wired, 2188K Cache, 152M Buf, 5015M Free Swap: 4096M Total, 4096M Free PID USERNAME THR PRI NICE SIZE RES STATE TIME WCPU COMMAND 2640 root 1 76 0 50164K 10364K RUN 0:52 16.99% smbd 1897 root 6 44 0 168M 74816K uwait 0:02 0.00% python I'm sorry if my question isn't phrased right, I'm really bad at these kind of things, and it is the first time I post here at SU. I also appreciate any other suggestions to something, I could have missed.

  Read the article

• VPS 512 MB RAM with WordPressMU comes to consumes lots of memory

  - by CAPitalZ

  I have googled for days and gathered all optimization suggestions and tried. My sites are not getting any high hits. May be like 100 hits per day [all my sites combined]. Here are my specs I have 512 MB RAM VPS with burstable 1024 MB. Centos 5 32-bit & cPanel/WHM Apache 2.2 MySQL 5.0 PHP 5.3.2 Here is my Configs I have 2 WordPressMU production sites, and 1 test site my.cnf # The following options will be passed to all MySQL clients [client] #password = your_password port = 3306 socket = /var/lib/mysql/mysql.sock # Here follows entries for some specific programs # The MySQL server [mysqld] port = 3306 socket = /var/lib/mysql/mysql.sock skip-locking skip-bdb skip-innodb key_buffer = 16M max_allowed_packet = 1M table_cache = 64 sort_buffer_size = 512K net_buffer_length = 8K read_buffer_size = 256K read_rnd_buffer_size = 512K myisam_sort_buffer_size = 8M #CAPitalZ thread_cache_size=8 thread_concurrency=4 #query_cache_type=1 #query_cache_limit=1M query_cache_size=16M concurrent_insert=2 low_priority_updates=1 max_connections=50 tmp_table_size=16M max_heap_table_size=16M join_buffer_size=1M interactive_timeout=25 wait_timeout=1000 #connect_timout=10 not able to restart mysql max_connect_errors=10 # Don't listen on a TCP/IP port at all. This can be a security enhancement, # if all processes that need to connect to mysqld run on the same host. # All interaction with mysqld must be made via Unix sockets or named pipes. # Note that using this option without enabling named pipes on Windows # (via the "enable-named-pipe" option) will render mysqld useless! # skip-networking # Disable Federated by default skip-federated # Replication Master Server (default) # binary logging is required for replication log-bin=mysql-bin # required unique id between 1 and 2^32 - 1 # defaults to 1 if master-host is not set # but will not function as a master if omitted server-id = 1 [mysqld_safe] open_files_limit=8192 [mysqldump] quick max_allowed_packet = 16M [mysql] no-auto-rehash # Remove the next comment character if you are not familiar with SQL #safe-updates [isamchk] key_buffer = 20M sort_buffer_size = 20M read_buffer = 2M write_buffer = 2M [myisamchk] key_buffer = 20M sort_buffer_size = 20M read_buffer = 2M write_buffer = 2M [mysqlhotcopy] interactive-timeout httpd.conf I have unselected many modules and recompiled using EasyApache in WHM. Only have the following modules built Deflate Expires Fileprotect Imagemap MPM Prefork Version [default] EAccelerator for PHP Bcmath Calendar CurlSSL [I'm using Curl. But I don't have any https sites] Expat GD [for image cropping] Gettext Imap Mbregex [default] Mbstring [need both Mbregex and Mbstring for utf-8] Mysql of the system MySQL "Improved" extension. Sockets TTF (FreeType) [I'm using custom font] Zlib Under Global Configuration I only have FollowSymLinks enabled I Have TraceEnable, ServerSignature, FileETag OFF ServerTokens ProductOnly DirectoryIndex Priority has index.php as the first one I have removed Clamd [Clam Anti-virus] SpamAssasin is Off Under Tweak Settings Default catch-all/default address behavior for new accounts. This is set to "fail" All stats programs turned off I have eAccelerator installed and checked in phpinfo and its working [Pre VirtualHost Include under WHM] Timeout 20 KeepAlive On MaxKeepAliveRequests 200 KeepAliveTimeout 3 MinSpareServers 1 MaxSpareServers 3 StartServers 1 ServerLimit 50 MaxClients 50 MaxRequestsPerChild 4000 ExtendedStatus Off #ServerType standalone this throws error HostnameLookups Off <Directory "/"> AllowOverride None </Directory> My sites will take ages to load and WHM/CPanel will not even load. adadaa.com/ http://adadaa.net/ kadais.ca/ My average memory consumption is like 1000 MB! [yes always bursting] The process that consumes most CPU and also most memory is mysql But I also get like 15 httpd processes [when its bursting] I already got warning from cpuwatchcheck saying "While processing, the cpu has been maxed out for more than a 6 hour period. The current load/uptime line on the server at the time of this email is 07:00:37 up 11:30, 0 users, load average: 14.64, 16.79, 20.07" I don't know, I have tried switching these config values many different times, but nothing seems to work. Please show some light... Thanks

  Read the article

• Capistrano + Nginx + Passenger = 403

  - by slimchrisp

  I asked this over at stackoverflow as well, but still haven't received any answers that have helped me to solve this problem. I have spent almost a week at this point trying to solve the issue, and I'm just not making any headway. It seems that this issue is pretty common, but none of the solutions I found online work for me. A buddy of mine is actually creating the same setup, and he is having the same issue. After a few days stuck with the 403 error I started over using this tutorial: http://blog.ninjahideout.com/posts/a-guide-to-a-nginx-passenger-and-rvm-server I had hoped starting from scratch using this tutorial would work, but no dice. Either way, if you view the tutorial you can see what steps I have taken. Here is essentially what I have going on. I have a VPS account on linode.com Server OS is Ubuntu 10.04 Local OS (shouldn't matter, but just so you know) used to deploy with Capistrano is Snow Leopard 10.6.6 I use RVM on the server. Version is 1.2.2 I was previously on ruby-1.9.2-p0 [ i386 ], but per the tutorial listed above I switched to ree-1.8.7-2010.02 [ i386 ]. Running 'which ruby' from the command line verifies that I am using 1.8.7 with the following output: /usr/local/rvm/rubies/ree-1.8.7-2010.02/bin/ruby passenger -v prints the following: Phusion Passenger version 3.0.2 Running 'nginx -v' gives me a message that the command nginx could not be found. The server is definitely there and running as I can use nginx to serve static files, but this could have something to do with my problem. I have two users dealing with the install. root which I used to install everything, and deployer which is a user I created specifically to for deploying my applications My web app directory is in the deployer user's home directory as follows: /home/deployer/webapps/mysite.com/public Per Capistrano default deploy, a symbolic link called current is created in the public folder, and points to /home/deployer/webapps/mysite.com/public/releases/most_current_release I have chmodded the deployer directory recursively to 777 /opt/nginx permissions: rwxr-xr-x /usr/local/rvm/gems/ree-1.8.7-2010.02/gems/passenger-3.0.2 permissions: rwxrwsrwx My nginx config file has gone through just short of eternity variations, but currently looks like this: ================================================================================== worker_processes 1; events { worker_connections 1024; } http { passenger_root /usr/local/rvm/gems/ree-1.8.7-2010.02/gems/passenger-3.0.2; passenger_ruby /usr/local/rvm/bin/passenger_ruby; include mime.types; default_type application/octet-stream; sendfile on; keepalive_timeout 65; server { # listen *:80; server_name mysite.com www.mysite.com; root /home/deployer/webapps/mysite.com/public/current; passenger_enabled on; passenger_friendly_error_pages on; access_log logs/mysite.com/server.log; error_log logs/mysite.com/error.log info; error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } } } ================================================================================== I bounce nginx, hit the site, and boom. 403, and logs say directory index of /home/deployer... is forbidden As others with a similar problem have said, you can drop an index.html into the public/releases/current_release and it will render. But rails no worky. That's basically it. At this point I have just about completely exhausted every possible solution attempt I can think of. I am a programmer and definitely not a sysadmin, so I am 99% sure this has something to do with permissions that I have hosed, but for the life of me I just can't figure out where. If anyone can help I would really really appreciate it. If there's any specific permission things you want me to check (ie groups/permissions), can you please include the commands to do so as well. Hopefully this will help others in the future who read this post. Let me know if there is any other information I can provide, and thanks in advance!!!

  Read the article

< Previous Page | 406 407 408 409 410 411 412 413 414 415 416 417  | Next Page >