Search Results

Search found 15280 results on 612 pages for 'encrypted home'.

Page 411/612 | < Previous Page | 407 408 409 410 411 412 413 414 415 416 417 418  | Next Page >

  • Regarding the battery of a new laptop [closed]

    - by Majed
    Possible Duplicate: Is it better to use a laptop on battery or on AC power? I bought a new laptop from HP. I am not sure if I should remove the battery while I am working on my laptop or not. What is better for my laptop battery, to keep it while the laptop is plugged in or to remove it? or to charge it and then pull out the plug and when the battery is flat then plug it again? I use my laptop alot (at home and sometimes at work as well).

    Read the article

  • Why does MTP work on one machine, but not another?

    - by bobmcn
    I have two Dell computers, a laptop and a desktop. I reinstalled Windows XP home on both, from the same CD. Then I installed Service pack 3 and ran windows update. When I connect my Creative Zen media player to the desktop, the MTP software that is part of XP recognizes it, and I can copy file to and from it using Windows Explorer. But when I connect the same player with the same cable to the laptop, I can see it in Windows Explorer, but none of the folders that are visible via the desktop are available, and I can't copy anything to or from it. How can I get this working on the laptop?

    Read the article

  • How do I fix "Setup did not find any hard disk drives installed in your computer" error during Win X

    - by CT
    I just bought a nettop. It came with WinXP Home. I first installed Win 7 on it. I wasn't that happy with the performance so I decided to go back to XP. I am using an external dvd drive and a Win XP Pro disc. I boot from the dvd drive and during the install get this error: Setup did not find any hard disk drives installed in your computer. Make sure any hard disk drives are powered on and properly connected to your computer, and that any disk-related hardware configuration is correct. This may involve running a manufacturer-supplied diagnostic or setup program. Setup cannot continue. To quit Setup, press F3. This is the nettop in question: http://www.newegg.com/Product/Product.aspx?Item=N82E16883103228

    Read the article

  • How to set up an inter-OS partition?

    - by Confuzzled Persun
    I need a working partition configuration for use and accessibility on both Ubuntu and Windows. I have an 8GB USB flash drive onto which I am installing Ubuntu 11.10 so that I can have a personal bootable OS wherever I go. I've installed Ubuntu several times, but I just can't seem to get this one partition right. This is my own configuration: Partition 1: Primary - 200MB - Beginning - Ext4 - /boot Partition 2: Primary - 1300MB - End - swap area Partition 3: Logical - 5200MB - Beginning - Ext4 - / Partition 4: Logical - 1258MB - Beginning - Ext4 - /home Partition 5: Logical - 42MB - End - FAT32? - /windows? What I want to do is to get partition 5 configured so I can access it on both the installed Ubuntu system and a Windows system (when the USB drive is connected while Windows is booted). Basically, what I want is Ubuntu installed on the USB drive along with a partition that I can access with other operating systems. I'm thinking I just need the technical configuration of "Use as:" and "Mount point:" for my final partition. But I don't know. Any help with this is appreciated. And any other tips are appreciated as well.

    Read the article

  • QR vcard with a photo

    - by Cayetano Gonçalves
    I am about to get a ton of business cards printed from my new corporation, and I am allowed to have a QR code on it, and I would really like to be able to add a photo to be attached to the vcard. I know in the raw vcard you can add a photo like this: BEGIN:VCARD VERSION:4.0 N:Gump;Forrest;;; FN: Forrest Gump ORG:Bubba Gump Shrimp Co. TITLE:Shrimp Man PHOTO:http://www.example.com/dir_photos/my_photo.gif TEL;TYPE=work,voice;VALUE=uri:tel:+1-111-555-1212 TEL;TYPE=home,voice;VALUE=uri:tel:+1-404-555-1212 ADR;TYPE=work;LABEL="42 Plantation St.\nBaytown, LA 30314\nUnited States of America" :;;42 Plantation St.;Baytown;LA;30314;United States of America EMAIL:[email protected] REV:20080424T195243Z END:VCARD But I can't find any way to include the photo field into a QR code, any suggestions would be greatly appreciated.

    Read the article

  • New entries on the GRUB

    - by Kiewic
    Hello. I updated my Ubuntu, and after that there were two new lines on my GRUB screen. Ubuntu 9.04, kernel 2.6.28-16-generic Ubuntu 9.04, kernel 2.6.28-16-generic (recovery mode) Ubuntu 9.04, kernel 2.6.28-11-generic Ubuntu 9.04, kernel 2.6.28-11-generic (recovey mode) Ubuntu 9.04, memtest86+ Other operating systems: Microsoft Windows XP Home Edition Do I have two kernels installed? Do the old entries are still useful? Each kernel takes up space? :P And that's not all, when a get into the old version of Ubuntu, the wireless card stops working on any Ubuntu version until I get into Windows and then go back to Ubuntu. Thanks for your help.

    Read the article

  • Welcome to the newly merged JCP EC!

    - by Heather VanCura
    As part of the JCP.Next effort, the second JSR as part of the JCP program reforms, JSR 355, Executive Committee (EC) Merge, will take effect on Tuesday as JCP 2.9. The first in the effort was JSR 348, which took effect as JCP 2.8 in October 2011. EC members guide the evolution of the Java technologies by approving and voting on all technology proposals (Java Specification Requests, or JSRs). They are also responsible for defining the JCP's rules of governance and the legal agreement between members and the organization. They provide guidance to the Program Management Office (PMO) and they represent the interests of the JCP to the broader community. Starting on Tuesday, 13 November, JCP 2.9 is in effect, and the EC is merged from two ECs -- one representing Java SE/EE and one representing Java ME -- to one merged EC. IBM and Oracle each gave up one of their two seats (one per EC) and the terms expired for four members who did not run for re-election: AT&T, Deutsch Telekom, Siemens and Vodafone. All four remain JCP members. In addition, the seat occupied by RIM was forfeited due to lack of participation in October 2012. The JCP values the organizations and representatives for their contribution to the JCP EC, and looks forward to their continued participation in the JCP Program. The complete listing of the EC, 24 members total at the moment, is now available. We asked the two newcomers to the EC, Cinterion and CloudBees, and the re-elected London Java Community, to comment on their plans for their term in the EC. Read about their plans in the article published on JCP.org, "JCP 2.9 with a Merged EC Takes Effect 13 November". Also, plan to attend the public (open to all community members) EC Meeting planned for 20 November at 15:00 PST.  Details will be posted here and on the JCP.org home page next week.

    Read the article

  • Seasgate GoFlex NAS + Horrible Speed = Bad Experience

    - by Jon H
    I am having issues with transfer speeds from my desktop PC to my NAS. I have my NAS hooked up to a Gigabit Gateway as well as my Desktop with Cat 5e. I see up to 4.0 MB/Second Transfer Rates, the normal is about 2.5 MB/Seconds. There is 3 Partitions on my NAS, Public, Private, Backup. When I transfer from Private to Public I see the speeds above. If its under the same partition almost instant. I was wondering if the speeds I am seeing is in due to my Computer or the NAS. I was looking into building my own Media Server in due to these horrible speeds. Is their anything I can do in the mean time to speed this up? Motherboard = M3970AM-HP (Angelica) Processor = AMD FX 6100 Ram = 10GB PC3-10600 MB/sec Hard Drive (1) = 1.5TB SATA 3.0GB 5400RPM Hard Drive (2) = 120GB SATA SSD NAS = Seagate 3TB Go Flex Home Connection (1) = 1000 Base T Connection (2) = Wireless N

    Read the article

  • Using Remote Desktop, connect to a Windows 7 domain user account without first logging on locally?

    - by calavera
    I have a dell laptop (henceforth we'll call this the server) running Windows 7 Enterprise. The server is part of my company's domain. My primary user account is a domain account. When I am at home and not connected to the domain, I prefer to connect to the server using Remote Desktop Connection from my MacBook Pro (we'll call this the client). The problem is, that if I do not physically login to the server, I am unable to connect to it using RDC from the client. I have a local administrator account on the server, and connecting to it via RDC works just fine. I had a feeling that the Mac RDC application was not giving me the full story, so I attempted the same procedure from a Windows 7 client. When trying to login, I get this message: So basically, If I logon to the server physically with my domain user and lock the computer, I can then successfully logon from the client. Otherwise, I am unable to connect.

    Read the article

  • Installing Oracle Client 11.1.0.7 on Windows Server 2008 64-bit. What does "Install Location" and "S

    - by Anders
    I am trying to install Oracle Client 11.1.0.7 on a Windows Server 2008 64-bit. To some this might not be rocket science but I can't understand what the options under the install screen "Specify Home Details" mean. The defaults given suggest that I use Oracle Base and install software under my own account name. It also suggests that each user should have a separate Oracle Base. This seems counter intuitive to me. I am doing a server install after all. All I want to use the installation for is to connect to an Oracle Database from Reporting Services. Can I safely ignore this and just accept the defaults? What are the implications if I change the location to a common directory?

    Read the article

  • How to install nvidia drivers (GT 440 ) on Xubuntu 12.10 , screen res gone to 640x480 :(

    - by shaggyjack
    Hi all after days of endless googling I finally gave in and decided to try and directly ask for help. I have just installed Xubuntu and updated to 12.10 on a pretty old (12 years) machine, and I am now struggling to install the correct drivers for the nvidia 440 gt card.. I have managed to get "additional drivers" but the app does not show in the menu, I went through a few procedures which ended up in my screen going no higher than 640x480, and tried all the sudo apt-get variations with nvidia-current and current updates... I think I got the right version of the drivers ( 93.43.07 ) but they won't install from terminal as they say I am running an X server. So I learnt how to shut the graphic interface but then I try and install them from there but after I write the exact same command (sudo home/username/Downloads/NVIDIA-Linux-x86-96.43.07.pkg1.run ) nothing happens and the terminal says something like command not found. I am desperate for help if anybody could point me in the right direction that would be greatly appreciated. There are lots of similar topics on installing nvidia drivers but I seem to understand that current drivers are no good for my old GPU. So if anybody could show me how to install the right version that would be excellent. Thanks in advance! Jack

    Read the article

  • Artefacts during HDV capture

    - by Jakub Konecki
    When I try to capture HDV video stream from a Canon HV20 camera to a Dell Studio 1558 (Intel i7 720qm) laptop running Win 7 Home Premium x64, the image appears with a very annoying noise - it contains block artefacts. Something is wrong with the Fire Wire controller (Ricoh 1304 OHCI host controller, build-in). Tried changing the driver to legacy one to no avail. This does not happen with DV stream. I'm using a Belkin cable. The capture works OK on another machine.

    Read the article

  • wireshark not seeing all packets on WiFi

    - by Caffeine Coma
    I'm using Wireshark on OSX, trying to sniff my home network over WiFi. While I can see packets that are sent to/from the host I'm sniffing on, I'm not seeing anything else that goes over the WiFi. It's like I'm not in promiscuous mode or something (the promiscuous mode box is in fact checked). The router is an Apple Airport Extreme, protected by WPA2. I'm attached to the network I'm trying to sniff, so I'm confused about why I can't see other traffic. Edit: I solved this by the following: Plug Macbook directly into the Airport Extreme router Enable "internet sharing" on Macbook, with no password. Bind wireless device (the one I wanted to sniff) to the WiFi hotspot generated by Internet sharing in step 2. Run Wireshark on the Macbook, bound to device en1. Don't forget to disable sharing after you're done. :-)

    Read the article

  • How can I make a vpn network login the default behavior for logging into Windows?

    - by Danny
    To login to the machine, I have to login to our domain. When I am at work, the unauthenticated wireless permits access to the domain. However, the internet is not available until I connect via the vpn. From home, I have to connect via the vpn first, then I can login to the domain. I have successfully setup a network logon with the vpn (following the directions found here). And for the most part it works correctly. (There is an issue with logout/login I haven't figured out just yet). As I currently have to Switch User and select the Network Login button, I'd like to know if it is possible to have the network login the default behavior when logging into the system. This is mostly a usability issue than anything else.

    Read the article

  • tradeoffs of iSCSI vs. AFP when using Time Machine with a NAS?

    - by ajit.george
    I'm setting up a home NAS device (Synology DS409) that I'm planning to use for Time Machine backups (amongst other things). What are the tradeoffs between using iSCSI or AFP to mount the backup volume? The Synology wiki suggests that iSCSI is better if the Mac will be frequently disconnected from the network or sleeping, from the point of view of the volume automatically remounting. What about filesystem consistency? Given that unplugging a USB drive without properly unmounting it often requires the Time Machine volume to be repaired, would iSCSI have the same issues? Thanks in advance.

    Read the article

  • Outlook Security Alert following Exchange 2007 upgrade to SP2

    - by desiny
    Following an update to Exchange 2007 sp2 (yes I know very belated) I have an issues when logging onto Outlook. I see the below message... I also had a simlar issues with web access and as I am at home with IIS, this was easily solved. However I did notice that the server contains a number of keys for autodiscover.mycompamy.com, exchange.mycompamy.com etc and it seems that the SP2 upgraded didnt know how to deal with this. As I have a wildcard ssl, I think it would be prudent to remove all other certificates, however in order to stop the nag when opening outlook - what can I do?

    Read the article

  • Browser language detection & content ranking for new language on the same site.

    - by Arnaud
    I've been reading a lot about it but it's still really hard to make up my mind. My understand is that if your website provide a link to the other language, this should not be an issue for google as long as your links are clear and clean, google will be able to make his way through it. The website was orginaly in french and I added the english version and I'm just worry that english speaker will just leave if the site is not in the correct language, for the home page I just wanted to get the value from the browser and redirect it to /fr/ or /en/ for the first page. (using php this will be very easy) Could you guys have a look at it and tell me what you think about it http://tinyurl.com/bpc5bn9 I don't want to get it wrong and lost my ranking with google. Also the website has good rank on the french side and the english has been online for 2 weeks and only get few visit a day, is that because all the back link refer to /fr/ and google is cleaver enough to decide that they are 2 differantes website and the back link will have to point to /en/ to increase the ranking value? Or will take few more weeks for the website to grow? Thanks for your hep

    Read the article

  • Detecting damage done by virus

    - by user38471
    This morning after I went to college, a virus infected my PC without any user interaction at my end. When I came home my computer was completely frozen and infected with lots of trojans. I have not typed anything important since returning so keys cannot be logged. However I want to know exactly when my computer crashed from the time of infection to see what could potentially be done remotely by a hacker. The virus my pc was diagnosed with was "fakespypro" on a fully updated Windows 7 installation with firewall enabled. My computer was connected to an internal dorm room network, so probably that has had to do something with it. Any further information about how I could backtrace this virus infection or ways to discover what data might be stolen would be greatly appreciated.

    Read the article

  • Disk Space Full

    - by Loki
    Setting up Ubuntu 10.04 server, the / disk space shows full under df, however the du does not show any of the space used. This has several mounts to Gluster FS'. I have tried a forced FSCK and to no avail. ~# df -h Filesystem Size Used Avail Use% Mounted on /dev/md0 141G 132G 0 100% / none 3.0G 224K 3.0G 1% /dev none 3.0G 0 3.0G 0% /dev/shm none 3.0G 76K 3.0G 1% /var/run none 3.0G 0 3.0G 0% /var/lock none 3.0G 0 3.0G 0% /lib/init/rw /dev/sdb1 9.0T 7.1T 1.9T 80% /brick1 /dev/sdb2 9.0T 7.9T 1.1T 88% /brick2 localhost:/sanvol09 385T 330T 56T 86% /mnt/sanvol09 <- Gluster FS uses local software to contact the DFS I've attempted a tune2fs and same issue arises # du -h --max-depth=1 --one-file-system / 4.0K /selinux 0 /proc 47M /boot 31M /mnt 8.0K /brick1 8.0K /brick2 391M /lib 4.0K /opt 7.4M /bin 0 /sys 379M /var 5.6M /etc 16K /lost+found 43M /root 4.0K /srv 5.7M /home 4.0K /media 7.0M /sbin 0 /dev 4.0K /tmp 4.0K /cdrom 631M /usr 1.6G / more info # df -ih Filesystem Inodes IUsed IFree IUse% Mounted on /dev/md0 9.0M 91K 8.9M 1% / none 746K 770 745K 1% /dev none 747K 1 747K 1% /dev/shm none 747K 32 747K 1% /var/run none 747K 1 747K 1% /var/lock none 747K 3 747K 1% /lib/init/rw /dev/sdb1 583M 1.8M 581M 1% /brick1 /dev/sdb2 583M 1.9M 581M 1% /brick2 localhost:/sanvol09 25G 76M 25G 1% /mnt/sanvol09 The final question: df show's 100% used, and its not, any other known fixes?

    Read the article

  • Remote Desktop over SSH SOCKS proxy to bypass firewall

    - by scrumpyjack
    Hi folks, I'm trying to connect to a Windows server from my Mac using RDC2.1 for Mac. The problem is the server I need to connect to is guarded by the evil dragon - IP-based access control on a completely separate network. I have an IP I can get in on, but it's at my office (i.e. a completely separate network). Because that network isn't set up for VPN, I've set up a SOCKS proxy through an SSH tunnel (which is all working fine). (SSH proxy) Me (on my Mac) ----------> Office Linux box ----> Windows server (home network) (office network) (other network) From my Linux server in my office (the SSH server) I can telnet to port 3389 on the Windows server, no problem. But from my Mac I can't get so much as a squeak out of it. Any ideas?

    Read the article

  • obtaining nimbuzz server certificate for nmdecrypt expert in NetMon

    - by lurscher
    I'm using Network Monitor 3.4 with the nmdecrypt expert. I'm opening a nimbuzz conversation node in the conversation window and i click Expert- nmDecrpt - run Expert that shows up a window where i have to add the server certificate. I am not sure how to retrieve the server certificate for nimbuzz XMPP chat service. Any idea how to do this? this question is a follow up question of this one. Edit for some background so it might be that this is encrypted with the server pubkey and i cannot retrieve the message, unless i debug the native binary and try to intercept the encryption code. I have a test client (using agsXMPP) that is able to connect with nimbuzz with no problems. the only thing that is not working is adding invisible mode. It seems this is some packet sent from the official client during login which i want to obtain. any suggestions to try to grab this info would be greatly appreciated. Maybe i should get myself (and learn) IDA pro? This is what i get inspecting the TLS frames on Network Monitor: Frame: Number = 81, Captured Frame Length = 769, MediaType = ETHERNET + Ethernet: Etype = Internet IP (IPv4),DestinationAddress:[...],SourceAddress:[....] + Ipv4: Src = ..., Dest = 192.168.2.101, Next Protocol = TCP, Packet ID = 9939, Total IP Length = 755 - Tcp: Flags=...AP..., SrcPort=5222, DstPort=3578, PayloadLen=715, Seq=4101074854 - 4101075569, Ack=1127356300, Win=4050 (scale factor 0x0) = 4050 SrcPort: 5222 DstPort: 3578 SequenceNumber: 4101074854 (0xF4716FA6) AcknowledgementNumber: 1127356300 (0x4332178C) + DataOffset: 80 (0x50) + Flags: ...AP... Window: 4050 (scale factor 0x0) = 4050 Checksum: 0x8841, Good UrgentPointer: 0 (0x0) TCPPayload: SourcePort = 5222, DestinationPort = 3578 TLSSSLData: Transport Layer Security (TLS) Payload Data - TLS: TLS Rec Layer-1 HandShake: Server Hello.; TLS Rec Layer-2 HandShake: Certificate.; TLS Rec Layer-3 HandShake: Server Hello Done. - TlsRecordLayer: TLS Rec Layer-1 HandShake: ContentType: HandShake: - Version: TLS 1.0 Major: 3 (0x3) Minor: 1 (0x1) Length: 42 (0x2A) - SSLHandshake: SSL HandShake ServerHello(0x02) HandShakeType: ServerHello(0x02) Length: 38 (0x26) - ServerHello: 0x1 + Version: TLS 1.0 + RandomBytes: SessionIDLength: 0 (0x0) TLSCipherSuite: TLS_RSA_WITH_AES_256_CBC_SHA { 0x00, 0x35 } CompressionMethod: 0 (0x0) - TlsRecordLayer: TLS Rec Layer-2 HandShake: ContentType: HandShake: - Version: TLS 1.0 Major: 3 (0x3) Minor: 1 (0x1) Length: 654 (0x28E) - SSLHandshake: SSL HandShake Certificate(0x0B) HandShakeType: Certificate(0x0B) Length: 650 (0x28A) - Cert: 0x1 CertLength: 647 (0x287) - Certificates: CertificateLength: 644 (0x284) - X509Cert: Issuer: nimbuzz.com,Nimbuzz,NL, Subject: nimbuzz.com,Nimbuzz,NL + SequenceHeader: - TbsCertificate: Issuer: nimbuzz.com,Nimbuzz,NL, Subject: nimbuzz.com,Nimbuzz,NL + SequenceHeader: + Tag0: + Version: (2) + SerialNumber: -1018418383 + Signature: Sha1WithRSAEncryption (1.2.840.113549.1.1.5) - Issuer: nimbuzz.com,Nimbuzz,NL - RdnSequence: nimbuzz.com,Nimbuzz,NL + SequenceOfHeader: 0x1 + Name: NL + Name: Nimbuzz + Name: nimbuzz.com + Validity: From: 02/22/10 20:22:32 UTC To: 02/20/20 20:22:32 UTC + Subject: nimbuzz.com,Nimbuzz,NL - SubjectPublicKeyInfo: RsaEncryption (1.2.840.113549.1.1.1) + SequenceHeader: + Algorithm: RsaEncryption (1.2.840.113549.1.1.1) - SubjectPublicKey: - AsnBitStringHeader: - AsnId: BitString type (Universal 3) - LowTag: Class: (00......) Universal (0) Type: (..0.....) Primitive TagValue: (...00011) 3 - AsnLen: Length = 141, LengthOfLength = 1 LengthType: LengthOfLength = 1 Length: 141 bytes BitString: + Tag3: + Extensions: - SignatureAlgorithm: Sha1WithRSAEncryption (1.2.840.113549.1.1.5) - SequenceHeader: - AsnId: Sequence and SequenceOf types (Universal 16) + LowTag: - AsnLen: Length = 13, LengthOfLength = 0 Length: 13 bytes, LengthOfLength = 0 + Algorithm: Sha1WithRSAEncryption (1.2.840.113549.1.1.5) - Parameters: Null Value - Sha1WithRSAEncryption: Null Value + AsnNullHeader: - Signature: - AsnBitStringHeader: - AsnId: BitString type (Universal 3) - LowTag: Class: (00......) Universal (0) Type: (..0.....) Primitive TagValue: (...00011) 3 - AsnLen: Length = 129, LengthOfLength = 1 LengthType: LengthOfLength = 1 Length: 129 bytes BitString: + TlsRecordLayer: TLS Rec Layer-3 HandShake:

    Read the article

  • Compiz shutdown hook?

    - by ???
    I want to check 10+ local Git repositories if they have any unpushed commit, before shutdown. (I always forgot to push them, so later, the next morning I came office and back home again) I think maybe the shutdown process can check some conditions to meet, if any condition is not met, then give the user the choice to continue to shutdown or just cancel. Then, I can write something to hook the shutdown to check my Git repository to push. EDIT I have changed the title from Ubuntu shutdown hook to Compiz shutdown hook. I want to hook to the small lovely shutdown button, rather then click another ugly shortcut icon on the desktop.

    Read the article

  • Managing arbitrary user permissions under PureFTPd

    - by Sebastián Grignoli
    I need to provide an FTP service that needs to be web-managed in the simplest way possible. My customer wants to create folders and users, and give them read only or read/write access arbitrarily. For example: The folder 'Documents' should be read only for several users, writable for internal users, and invisible for the rest. The folder 'Pictures' should be read only for journalists, writable for associates, and invisible for the rest. The folder 'Media' should be read only, writable or invisible for arbitrary users specified on the admin. There could be a large number of users and folders. I can't find a good way to accomplish that. I thought that I could give each user a home folder and put symlinks for the folders he has read access to, and make the user part of the folder's group when he has write access too, but now I think that this wouldn't work, because with PureFTPd (or ProFTPd) I can only specify the virtual user's mapping to a system user, and only one GUID for each virtual user. My approach requires that I could specify several GUIDs for each user (one by each folder he has write access to). I need to start programming this admin and I still don't know wich approach would work, if any. ¿Any ideas?

    Read the article

  • Automate the backup of my databases and files with cron

    - by Patrick
    hi, I want to automate the backup of my databases and files with cron. Should I add the following lines to crontab ? mysqldump -u root -pPASSWORD database_name | gzip > /home/backup/database_`date +\%m-\%d-\%Y`.sql.gz svn commit -m "Committing the working copy containing the database dump" First of all, is this a good approach? It is not clear how to specify the repository and the working copy with svn? How can I run svn only when the mysqldump is done and not before ? Avoiding conflicts

    Read the article

  • Can't see any YouTube videos

    - by André
    I have a problem with watching YouTube videos. It says: "An error occurred, please try again later". I've tried loading different videos and that's what it says to all the videos I try to watch. I've tried using another browser, clearing cache + cookies etc, but none of that really worked out. My operating system is Windows 7 Home Premium, I use Google Chrome as my browser. And the YouTube videos was able to be watched earlier. I suspect that it has something to do with the PC, since I've got YouTube working on my laptop earlier. Not sure if it still works on my laptop though. Hope I've given enough information for you to help me out with this problem. Feel free to ask if there's anything else you need to know. Anyone who can help me out?

    Read the article

< Previous Page | 407 408 409 410 411 412 413 414 415 416 417 418  | Next Page >