Search Results

Search found 11210 results on 449 pages for 'get the title'.

Page 411/449 | < Previous Page | 407 408 409 410 411 412 413 414 415 416 417 418  | Next Page >

  • Implement Semi-Round-Robin file which can be expanded and saved on demand

    - by ircmaxell
    Ok, that title is going to be a little bit confusing. Let me try to explain it a little bit better. I am building a logging program. The program will have 3 main states: Write to a round-robin buffer file, keeping only the last 10 minutes of data. Write to a buffer file, ignoring the time (record all data). Rename entire buffer file, and start a new one with the past 10 minutes of data (and change state to 1). Now, the use case is this. I have been experiencing some network bottlenecks from time to time in our network. So I want to build a system to record TCP traffic when it detects the bottleneck (detection via Nagios). However by the time it detects the bottlenecking, most of the useful data has already been transmitted. So, what I'd like is to have a deamon that runs something like dumpcap all the time. In normal mode, it'll only keep the past 10 minutes of data (Since there's no point in keeping a boat load of data if it's not needed). But when Nagios alerts, I will send a signal in the deamon to store everything. Then, when Naigos recovers it will send another signal to stop storing and flush the buffer to a save file. Now, the problem is that I can't see how to cleanly store a rotating 10 minutes of data. I could store a new file every 10 minutes and delete the old ones if in mode 1. But that seems a bit dirty to me (especially when it comes to figuring out when the alert happened in the file). Ideally, the file that was saved should be such that the alert is always at the 10:00 mark in the file. While that is possible with new files every 10 minutes, it seems like a bit dirty to "repair" the files to that point. Any ideas? Should I just do a rotating file system and combine them into 1 at the end (doing quite a bit of post-processing)? Is there a way to implement the semi-round-robin file cleanly so that there is no need for any post-processing? Thanks Oh, and the language doesn't matter as much at this stage (I'm leaning towards Python, but have no objection to any other language. It's less of an issue than the overall design)...

    Read the article

  • Is the Scala 2.8 collections library a case of "the longest suicide note in history" ?

    - by oxbow_lakes
    First note the inflammatory subject title is a quotation made about the manifesto of a UK political party in the early 1980s. This question is subjective but it is a genuine question, I've made it CW and I'd like some opinions on the matter. Despite whatever my wife and coworkers keep telling me, I don't think I'm an idiot: I have a good degree in mathematics from the University of Oxford and I've been programming commercially for almost 12 years and in Scala for about a year (also commercially). I have just started to look at the Scala collections library re-implementation which is coming in the imminent 2.8 release. Those familiar with the library from 2.7 will notice that the library, from a usage perspective, has changed little. For example... > List("Paris", "London").map(_.length) res0: List[Int] List(5, 6) ...would work in either versions. The library is eminently useable: in fact it's fantastic. However, those previously unfamiliar with Scala and poking around to get a feel for the language now have to make sense of method signatures like: def map[B, That](f: A => B)(implicit bf: CanBuildFrom[Repr, B, That]): That For such simple functionality, this is a daunting signature and one which I find myself struggling to understand. Not that I think Scala was ever likely to be the next Java (or /C/C++/C#) - I don't believe its creators were aiming it at that market - but I think it is/was certainly feasible for Scala to become the next Ruby or Python (i.e. to gain a significant commercial user-base) Is this going to put people off coming to Scala? Is this going to give Scala a bad name in the commercial world as an academic plaything that only dedicated PhD students can understand? Are CTOs and heads of software going to get scared off? Was the library re-design a sensible idea? If you're using Scala commercially, are you worried about this? Are you planning to adopt 2.8 immediately or wait to see what happens? Steve Yegge once attacked Scala (mistakenly in my opinion) for what he saw as its overcomplicated type-system. I worry that someone is going to have a field day spreading fud with this API (similarly to how Josh Bloch scared the JCP out of adding closures to Java). Note - I should be clear that, whilst I believe that Josh Bloch was influential in the rejection of the BGGA closures proposal, I don't ascribe this to anything other than his honestly-held beliefs that the proposal represented a mistake.

    Read the article

  • understanding logic of dijit css and styles

    - by Tom
    Hi, I am trying to use dijit.InlineEditBox. I have put the following code in my HTML, using the example in the dojo docs: <script type="text/javascript"> dojo.require("dijit.InlineEditBox"); dojo.require("dojo.parser"); dojo.require("dijit.form.TextBox"); function editableHeaderOnChange(id, arg){ alert("details changed with id " + id + " and arguments "+arg); } </script> ... <span id="myText" dojoType="dijit.InlineEditBox" onChange="editableHeaderOnChange(this.id,arguments[0])" autoSave="true" title="My Text">click to edit me</span> I am using tundra theme. It works, however it doesn't look so good. The widget has its own style, which doesn't fit my CSS. I used firebug to locate the source of the problem. The widget creates many nested div/span elements, each has it's own style (element style in firebug): <span id="dijit__InlineEditor_0" class="dijitReset dijitInline" style="margin: 0px; position: absolute; visibility: hidden; display: block; opacity: 0;" ...> <input type="text" autocomplete="off" class="dijit dijitReset dijitLeft dijitTextBox" id="dijit_form_TextBox_0" style="line-height: 20px; font-weight: 400; font-family: Trebuchet MS,Helvetica,Arial,Verdana; font-size: 14.5167px; font-style: normal; width: 100%;"> ...> </span></span> (showing only the relevant parts...) to get the visual that I want, which will not break to a newline, I need to change the width of dijit_form_TextBox_0** to 50%, and the positioning of dijit__InlineEditor_0 to display: inline**; or to change the positioning of everything (most of my layout is floated, so position: absolute doesn't fit) I cannot address those span elements in my css to change the properties, because the element.style has priority, of course. I don't understand the logic in this system... why is dijit generating the style directly inside the element? how can I change these properties? Thanks Tom

    Read the article

  • Html Agility Pack: DescendantsOrSelf() not returning HTML element

    - by Program.X
    I have some HTML, eg: <%@ Page Title="About Us" Language="C#" MasterPageFile="~/Site.master" AutoEventWireup="true" CodeBehind="ContentManagedTargetPage.aspx.cs" Inherits="xxx.ContentManagedTargetPage" %> <%@ Register TagPrefix="CxCMS" Namespace="xxx.ContentManagement.ASPNET.UI" Assembly="xxx.ContentManagement.ASPNET" %> <asp:Content ID="HeaderContent" runat="server" ContentPlaceHolderID="HeadContent"> </asp:Content> <asp:Content ID="BodyContent" runat="server" ContentPlaceHolderID="MainContent"> <h2> Content Managed </h2> <p> Put content here. [<CxCMS:ContentManagedPlaceHolder Key="keyThingy" runat="server" />] </p> </asp:Content> And I want to find all the instances of the CxCMS:ContentManagedPlaceHolder element. I'm using HTML Agility Pack, which seems the best fit. However, despite looking at the [meagre] documentation, I can't get my code to work. I would expect the following to work: string searchForElement = "CxCMS:ContentManagedPlaceHolder"; IEnumerable<HtmlNode> contentPlaceHolderHtmlNodes = HtmlDocument.DocumentNode.Descendants(searchForElement); int count = contentPlaceHolderHtmlNodes.Count(); But I get nothing back. If I change to DescendantsOrSelf, I get the document node back, "#document" - which is incorrect: string searchForElement = "CxCMS:ContentManagedPlaceHolder"; IEnumerable<HtmlNode> contentPlaceHolderHtmlNodes = HtmlDocument.DocumentNode.DescendantsOrSelf(searchForElement); int count = contentPlaceHolderHtmlNodes.Count(); I also tried using LINQ: string searchForElement = "CxCMS:ContentManagedPlaceHolder"; IEnumerable<HtmlNode> contentPlaceHolderHtmlNodes = HtmlDocument.DocumentNode.DescendantsOrSelf().Where(q=>q.Name==searchForElement); int count = contentPlaceHolderHtmlNodes.Count(); As neither of these methods work, I moved onto using SelectNodes, instead: string searchForElement = "CxCMS:ContentManagedPlaceHolder"; string xPath="//"+searchForElement // "//CxCMS:ContentManagedPlaceHolder" var nodes= HtmlDocument.DocumentNode.SelectNodes(xPath); This just throws the exception: "Namespace Manager or XsltContext needed. This query has a prefix, variable, or user-defined function.". I can't find any way of adding namespace management to the HtmlDocument object. What am I missing, here? The DescendantsOrSelf() method works if using a "standard" HTML tag, such as "p", but not the one I have. Surely it should work? (It needs to!)

    Read the article

  • jPlayer widget created with static error as result

    - by goldengel
    I've created a widged with Orchard. Unfortunately I've used the same "Title" for a jPlayer widget twice. Now I receive an error: Server Error in '/wgk' Application. Sequence contains more than one element Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidOperationException: Sequence contains more than one element Source Error: Line 2: <fieldset> Line 3: <div>@Html.LabelFor(o => o.MediaGalleryName, @T("Media gallery"))</div> Line 4: @if(!Model.HasAvailableGalleries) { Line 5: <div>@T("You need first to create an media gallery on Media Gallery menu")</div> Line 6: } Source File: x:\Intepub\wgk\Modules\Orchard.jPlayer\Views\EditorTemplates\Parts\MediaGallery.cshtml Line: 4 Stack Trace: [InvalidOperationException: Sequence contains more than one element] System.Linq.Enumerable.SingleOrDefault(IEnumerable`1 source) +4206966 NHibernate.Linq.Visitors.ImmediateResultsVisitor`1.HandleSingleOrDefaultCall(MethodCallExpression call) +51 NHibernate.Linq.Visitors.ImmediateResultsVisitor`1.VisitMethodCall(MethodCallExpression call) +411 NHibernate.Linq.Visitors.ExpressionVisitor.Visit(Expression exp) +371 In MediaGallery.cshtml (found in error description above) is written: @model Orchard.jPlayer.Models.MediaGalleryPart <fieldset> <div>@Html.LabelFor(o => o.MediaGalleryName, @T("Media gallery"))</div> @if(!Model.HasAvailableGalleries) { <div>@T("You need first to create an media gallery on Media Gallery menu")</div> } else { <div>@Html.DropDownListFor(o => o.SelectedGallery, Model.AvailableGalleries)</div> <div>@Html.LabelFor(o => o.SelectedType, @T("Media gallery type"))</div> <div>@Html.DropDownListFor(o => o.SelectedType, Model.AvailableTypes)</div> <div>@Html.LabelFor(o => o.AutoPlay, @T("Auto play"))</div> <div>@Html.CheckBoxFor(o => o.AutoPlay)</div> } </fieldset> My problem is now, I cannot find or edit the widget with double used name. I would love to replace it to another name. But I do not know where to do this. Please advice.

    Read the article

  • ON DELETE RESTRICT Causing Error 150

    - by Levi Hackwith
    CREATE TABLE project ( id INTEGER NOT NULL AUTO_INCREMENT, created_at DATETIME NOT NULL, name VARCHAR(75) NOT NULL, description LONGTEXT NOT NULL, is_active TINYINT NOT NULL DEFAULT '1', PRIMARY KEY (id), INDEX(name, created_at) ) ENGINE = INNODB; CREATE TABLE role ( id INTEGER NOT NULL, name VARCHAR(50) NOT NULL, description LONGTEXT NOT NULL, PRIMARY KEY (id) ) ENGINE = INNODB; CREATE TABLE organization ( id INTEGER NOT NULL AUTO_INCREMENT, created_at DATETIME NOT NULL, name VARCHAR(100) NOT NULL, is_active TINYINT NOT NULL DEFAULT '1', PRIMARY KEY (id) ) ENGINE = INNODB; CREATE TABLE user ( id INTEGER NOT NULL AUTO_INCREMENT, created_at DATETIME NOT NULL, role_id INTEGER NOT NULL, organization_id INTEGER NOT NULL, last_login_at DATETIME NOT NULL, last_ip_address VARCHAR(25) NOT NULL, username VARCHAR(45) NOT NULL, password CHAR(32) NOT NULL, email_address VARCHAR(255) NOT NULL, first_name VARCHAR(45) NOT NULL, last_name VARCHAR(45) NOT NULL, address_1 VARCHAR(100) NOT NULL, address_2 VARCHAR(25) NULL, city VARCHAR(25) NOT NULL, state CHAR(2) NOT NULL, zip_code VARCHAR(10) NOT NULL, primary_phone_number VARCHAR(10) NOT NULL, secondary_phone_number VARCHAR(10) NOT NULL, is_primary_organization_contact TINYINT NOT NULL DEFAULT '0', is_active TINYINT NOT NULL DEFAULT '1', PRIMARY KEY (id), CONSTRAINT fk_user_role_id FOREIGN KEY (role_id) REFERENCES role (id) ON UPDATE RESTRICT ON DELETE RESTRICT, CONSTRAINT fk_user_organization_id FOREIGN KEY (organization_id) REFERENCES organization (id) ON UPDATE RESTRICT ON DELETE RESTRICT ) ENGINE = INNODB; CREATE TABLE project_user ( user_id INTEGER NOT NULL, project_id INTEGER NOT NULL, PRIMARY KEY (user_id, project_id), CONSTRAINT fk_project_user_user_id FOREIGN KEY (user_id) REFERENCES user (id) ON UPDATE RESTRICT ON DELETE CASCADE, CONSTRAINT fk_project_user_project_id FOREIGN KEY (project_id) REFERENCES project (id) ON UPDATE RESTRICT ON DELETE RESTRICT ) ENGINE = INNODB; CREATE TABLE ticket_category ( id INTEGER NOT NULL AUTO_INCREMENT, name VARCHAR(20) NOT NULL, description LONGTEXT NOT NULL, PRIMARY KEY (id) ) ENGINE = INNODB; CREATE TABLE ticket_type ( id INTEGER NOT NULL AUTO_INCREMENT, name VARCHAR(20) NOT NULL, description LONGTEXT NOT NULL, PRIMARY KEY (id) ) ENGINE = INNODB; CREATE TABLE ticket_status ( id INTEGER NOT NULL AUTO_INCREMENT, name VARCHAR(20) NOT NULL, description LONGTEXT NOT NULL, PRIMARY KEY (id) ) ENGINE = INNODB; CREATE TABLE ticket ( id INTEGER NOT NULL AUTO_INCREMENT, created_at DATETIME NOT NULL, project_id INTEGER NOT NULL, created_by INTEGER NOT NULL, submitted_by INTEGER NOT NULL, assigned_to INTEGER NULL, category_id INTEGER NOT NULL, type_id INTEGER NOT NULL, title VARCHAR(75) NOT NULL, description LONGTEXT NOT NULL, contact_type_id TINYINT NOT NULL, affects_all_clients TINYINT NOT NULL DEFAULT '0', is_billable TINYINT NOT NULL DEFAULT '1', esimated_hours DECIMAL(4, 1) NOT NULL DEFAULT '0', hours_worked DECIMAL (4, 1) NOT NULL DEFAULT '0', status_id TINYINT NOT NULL, PRIMARY KEY (id), CONSTRAINT fk_ticket_project_id FOREIGN KEY (project_id) REFERENCES project (id) ON UPDATE RESTRICT ON DELETE RESTRICT, CONSTRAINT fk_ticket_created_by FOREIGN KEY (created_by) REFERENCES user (id) ON UPDATE RESTRICT ON DELETE RESTRICT, CONSTRAINT fk_ticket_submitted_by FOREIGN KEY (submitted_by) REFERENCES user (id) ON UPDATE RESTRICT ON DELETE RESTRICT, CONSTRAINT fk_ticket_assigned_to FOREIGN KEY (assigned_to) REFERENCES user (id) ON UPDATE RESTRICT ON DELETE RESTRICT, CONSTRAINT fk_ticket_category_id FOREIGN KEY (category_id) REFERENCES ticket_category (id) ON UPDATE RESTRICT ON DELETE RESTRICT, CONSTRAINT fk_ticket_type_id FOREIGN KEY (type_id) REFERENCES ticket_type (id) ON UPDATE RESTRICT ON DELETE RESTRICT, CONSTRAINT fk_ticket_status_id FOREIGN KEY (status_id) REFERENCES ticket_status (id) ON UPDATE RESTRICT ON DELETE RESTRICT ) ENGINE = INNODB; CREATE TABLE ticket_time_entry ( id INTEGER NOT NULL AUTO_INCREMENT, user_id INTEGER NOT NULL, ticket_id INTEGER NOT NULL, started_at DATETIME NOT NULL, ended_at DATETIME NOT NULL, PRIMARY KEY (id), CONSTRAINT fk_ticket_time_entry_user_id FOREIGN KEY (user_id) REFERENCES user (id) ON UPDATE RESTRICT ON DELETE RESTRICT, CONSTRAINT fk_ticket_time_entry_ticket_id FOREIGN KEY (ticket_id) REFERENCES ticket (id) ON UPDATE RESTRICT ON DELETE RESTRICT ) ENGINE = INNODB; The ticket table's create statement causes an error 150. I have no clue why. When I remove the ON DELETE RESTRICT statements from the table declaration, it works. Why is that?

    Read the article

  • Historical / auditable database

    - by Mark
    Hi all, This question is related to the schema that can be found in one of my other questions here. Basically in my database I store users, locations, sensors amongst other things. All of these things are editable in the system by users, and deletable. However - when an item is edited or deleted I need to store the old data; I need to be able to see what the data was before the change. There are also non-editable items in the database, such as "readings". They are more of a log really. Readings are logged against sensors, because its the reading for a particular sensor. If I generate a report of readings, I need to be able to see what the attributes for a location or sensor was at the time of the reading. Basically I should be able to reconstruct the data for any point in time. Now, I've done this before and got it working well by adding the following columns to each editable table: valid_from valid_to edited_by If valid_to = 9999-12-31 23:59:59 then that's the current record. If valid_to equals valid_from, then the record is deleted. However, I was never happy with the triggers I needed to use to enforce foreign key consistency. I can possibly avoid triggers by using the extension to the "PostgreSQL" database. This provides a column type called "period" which allows you to store a period of time between two dates, and then allows you to do CHECK constraints to prevent overlapping periods. That might be an answer. I am wondering though if there is another way. I've seen people mention using special historical tables, but I don't really like the thought of maintainling 2 tables for almost every 1 table (though it still might be a possibility). Maybe I could cut down my initial implementation to not bother checking the consistency of records that aren't "current" - i.e. only bother to check constraints on records where the valid_to is 9999-12-31 23:59:59. Afterall, the people who use historical tables do not seem to have constraint checks on those tables (for the same reason, you'd need triggers). Does anyone have any thoughts about this? PS - the title also mentions auditable database. In the previous system I mentioned, there is always the edited_by field. This allowed all changes to be tracked so we could always see who changed a record. Not sure how much difference that might make. Thanks.

    Read the article

  • Save File to Sharepoint Server using JAX-WS

    - by Evan Porter
    I'm trying to save a file to a Sharepoint server using JAX-WS. The web service call is reporting a success, but the file doesn't show up. I used this command (from a WinXP) to generate the Java code to make the JAX-WS call: wsimport -keep -extension -Xnocompile http://hostname/sites/teamname/_vti_bin/Copy.asmx?WSDL I get a handle on the web service which I called port using the following: CopySoap port = null; if (userName != null && password != null) { Copy service = new Copy(); port = service.getCopySoap(); ((BindingProvider) port).getRequestContext().put(BindingProvider.USERNAME_PROPERTY, userName); ((BindingProvider) port).getRequestContext().put(BindingProvider.PASSWORD_PROPERTY, password); } else { throw new Exception("Holy Frijolé! Null userName and/or password!"); } I called the web service using the following: port.copyIntoItems(sourceUrl, destUrlCollection, fields , "Contents of the file".getBytes(), copyIntoItemsResult, copyResultCollection) The sourceUrl and the only url in destUrlCollection equals "hostname/sites/teamname/Tech Docs/Sub Folder". The FieldInformationCollection object named fields contains only one FieldInformation. The FieldInformation object has "HelloWorld.txt" as the value for displayName, internalName and value. The type property is set to FieldType.FILE. The id property is set to (java.util.UUID.randomUUID()).toString(). The call to copyIntoItems returns successfuly; copyIntoItemsResult contains a value of 0 and the only CopyResult object set in copyResultCollection has an error code of "SUCCESS" with a null error message. When I look into the "Tech Docs" library on Sharepoint, in the "Sub Folder" there's no file there. Why wouldn't it tell me what I did wrong? Did I just miss a step? Update (Feb 26th, 2011) I've changed my FieldInformation object's displayName and internalName properties to be "Title" as suggested. Still no joy, but a step in the right direction. After playing around with the urls for a bit, I got these results: With both the sourceUrl and the only destination URL equivalent, with no protocol, I get the SUCCESS response but no actual document appears in the document library. With both of the URLs equivalent but with an "http://" protocol specified, I get an UNKNOWN error with "Object reference not set to an instance of an object." as the message. With the source URL an empty string or null, I get an UNKNOWN error with " Value does not fall within the expected range." as the error message.

    Read the article

  • ASP.NET MVC - PartialView html not changing via jQuery html() call

    - by Bryan Roth
    When I change the selection in a DropDownList, a PartialView gets updated via a GET request. When updating the PartialView via the jQuery html() function, the html returned is correct but when it displayed in the browser it is not correct. For example, certain checkboxes within the PartialView should become enabled but they remain disabled even though the html returned says they should be. When I do a view source in the browser the html never gets updated. I'm a little perplexed. Thoughts? Search.aspx <%@ Page Title="" Language="VB" MasterPageFile="~/Views/Shared/Site.Master" Inherits="System.Web.Mvc.ViewPage" %> <asp:Content ID="Content1" ContentPlaceHolderID="TitleContent" runat="server"> Search </asp:Content> <asp:Content ID="Content2" ContentPlaceHolderID="MainContent" runat="server"> <script type="text/javascript"> $(document).ready(function () { $("#Sections").change(function () { var section = $("#Sections").val(); var township = $("#Townships").val(); var range = $("#Ranges").val(); $.get("Search/Search?section=" + section + "&township=" + township + "&range=" + range, function (response) { $("#cornerDiv").html(response) }); }); }); </script> <h2>Search</h2> <%--The line below is a workaround for a VB / ASPX designer bug--%> <%=""%> <% Using Ajax.BeginForm("Search", New AjaxOptions With {.UpdateTargetId = "searchResults", .LoadingElementId = "loader"})%> Township <%= Html.DropDownList("Townships")%> Range <%= Html.DropDownList("Ranges")%> Section <%= Html.DropDownList("Sections")%> <div id="cornerDiv"> <% Html.RenderPartial("Corners")%> </div> <input type="submit" value="Search" /> <span id="loader">Searching...</span> <% End Using%> <div id="searchResults"></div> </asp:Content>

    Read the article

  • Updating a deallocated UIWebView from a background thread

    - by Dan Ray
    As you can see from the title, I've programmed myself into a corner and I've got several things working against me... In a UIViewController subclass that manages a large and complex view. One part of it is a UIWebView that contains output from a web request that I had to build and execute, and manually assemble HTML from. Since it takes a second or two to run, I dropped it into the background by calling self performSelectorInBackground:. Then from that method I call there, I use self performSelectorOnMainThread: to get back to the surface of the thread stack to update the UIWebView with what I just got. Like this (which I've cut down to show only the relevant issues): -(void)locationManager:(CLLocationManager *)manager didUpdateToLocation:(CLLocation *)newLocation fromLocation:(CLLocation *)oldLocation { //then get mapquest directions NSLog(@"Got called to handle new location!"); [manager stopUpdatingLocation]; [self performSelectorInBackground:@selector(getDirectionsFromHere:) withObject:newLocation]; } - (void)getDirectionsFromHere:(CLLocation *)newLocation { NSAutoreleasePool *pool = [[NSAutoreleasePool alloc] init]; CLLocationCoordinate2D here = newLocation.coordinate; // assemble a call to the MapQuest directions API in NSString *dirURL // ...cut for brevity NSLog(@"Query is %@", dirURL); NSString *response = [NSString stringWithContentsOfURL:[NSURL URLWithString:dirURL] encoding:NSUTF8StringEncoding error:NULL]; NSMutableString *directionsOutput = [[NSMutableString alloc] init]; // assemble response into an HTML table in NSString *directionsOutput // ...cut for brevity [self performSelectorOnMainThread:@selector(updateDirectionsWithHtml:) withObject:directionsOutput waitUntilDone:NO]; [directionsOutput release]; [pool drain]; [pool release]; } - (void)updateDirectionsWithHtml:(NSString *)directionsOutput { [self.directionsWebView loadHTMLString:directionsOutput baseURL:nil]; } This all works totally great, UNLESS I've backed out of this view controller before CLLocationManager hits its delegate method. If this happens after I've already left this view, I get: 2010-06-07 16:38:08.508 EverWondr[180:760b] bool _WebTryThreadLock(bool), 0x1b6830: Tried to obtain the web lock from a thread other than the main thread or the web thread. This may be a result of calling to UIKit from a secondary thread. Crashing now... Despite what this says, I can repeatably cause this crash when I back out too early. I'm not at all convinced that attempting a UI update from a background thread is really the issue; I think it's that my UIWebView is deallocated. I suspect that the fact I was just IN a background thread makes the runtime suspect something's up about that, but I feel fairly sure that's not it. So how do I tell CLLocationManager not to worry about it, when I'm backing out of that view? I tried [self.locationManager stopUpdatingLocation] inside my viewWillDisappear method, but that didn't do it. (Incidentally, MapQuest's apis are FANTASTIC. Way WAY better than anything Google provides. I can't recommend them highly enough.)

    Read the article

  • Jquery retrieve values of Dynamically created elements

    - by Amitd
    Hi, I have a html page with a form. The form has Div which gets populated dynamically with Input elements like text box,radio,checkbox etc. Now I want to retrieve the values of these dynamically created elements in the Html page,so that i can submit it to a page. //HTML PAGE <script type="text/javascript"> $(function() { populateQuestions(); }); $("#submit_btn").click(function() { // validate and process form here //HOW TO ??retrieve values??? var optionSelected = $("input#OptionSelected_1").val();// doesn't work? // alert(optionSelected); postAnswer(qid,values);//submit values showNextQuestion() ;// populate Div Questions again new values }); </script> <form action="" name="frmQuestion"> <div id="Questions" style="color: #FF0000"> </div> //Question DIV generation script example radio buttons //questionText text of question //option for question questionOptions // **sample call** var question = createQuestionElement("1","MCQ", "WHAT IS ABCD??", "Opt1$Opt2$Opt3"); question.appendTo($('#Questions')); function createQuestionElement(id, type, questionText, questionOptions) { var questionDiv = $('<div>').attr('id', 'Question'); var divTitle = $('<div>').attr('id', 'Question Title').html(questionText); divTitle.appendTo(questionDiv); var divOptions = $('<div>').attr('id', 'Question Options'); createOptions(id, "radio", questionOptions, divOptions); divOptions.appendTo(questionDiv); return questionDiv; } function createOptions(id, type, options, div) { var optionArray = options.split("$"); // Loop over each value in the array. $.each( optionArray, function(intIndex, objValue) { if (intIndex == 0) { div.append($("<input type='" + type + "' name='OptionSelected_" + id + "' checked='checked' value='" + objValue + "'>")); } else { div.append($("<input type='" + type + "' name='OptionSelected_" + id + "' value='" + objValue + "'>")); } div.append(objValue); div.append("<br/>"); }

    Read the article

  • amazon product advertising api - item lookup request working example

    - by I__
    would anyone have a working example of an amazon ITEMLOOKUP ? i have the following code but it does not seem to work: string ISBN = "0393326381"; string ASIN = ""; if (!(string.IsNullOrEmpty(ISBN) && string.IsNullOrEmpty(ASIN))) { AWSECommerceServicePortTypeChannel service = new AWSECommerceServicePortTypeChannel(); ItemLookup lookup = new ItemLookup(); ItemLookupRequest request = new ItemLookupRequest(); lookup.AssociateTag = secretKey; lookup.AWSAccessKeyId = accessKeyId; if (string.IsNullOrEmpty(ASIN)) { request.IdType = ItemLookupRequestIdType.ISBN; request.ItemId = new string[] { ISBN.Replace("-", "") }; } else { request.IdType = ItemLookupRequestIdType.ASIN; request.ItemId = new string[] { ASIN }; } request.ResponseGroup = new string[] { "OfferSummary" }; lookup.Request = new ItemLookupRequest[] { request }; response = service.ItemLookup(lookup); if (response.Items.Length > 0 && response.Items[0].Item.Length > 0) { Item item = response.Items[0].Item[0]; if (item.MediumImage == null) { //bookImageHyperlink.Visible = false; } else { //bookImageHyperlink.ImageUrl = item.MediumImage.URL; } //bookImageHyperlink.NavigateUrl = item.DetailPageURL; //bookTitleHyperlink.Text = item.ItemAttributes.Title; //bookTitleHyperlink.NavigateUrl = item.DetailPageURL; if (item.OfferSummary.LowestNewPrice == null) { if (item.OfferSummary.LowestUsedPrice == null) { //priceHyperlink.Visible = false; } else { //priceHyperlink.Text = string.Format("Buy used {0}", item.OfferSummary.LowestUsedPrice.FormattedPrice); //priceHyperlink.NavigateUrl = item.DetailPageURL; } } else { //priceHyperlink.Text = string.Format("Buy new {0}", item.OfferSummary.LowestNewPrice.FormattedPrice); //priceHyperlink.NavigateUrl = item.DetailPageURL; } if (item.ItemAttributes.Author != null) { //authorLabel.Text = string.Format("By {0}", string.Join(", ", item.ItemAttributes.Author)); } else { //authorLabel.Text = string.Format("By {0}", string.Join(", ", item.ItemAttributes.Creator.Select(c => c.Value).ToArray())); } /* ItemLink link = item.ItemLinks.Where(i => i.Description.Contains("Wishlist")).FirstOrDefault(); if (link == null) { //wishListHyperlink.Visible = false; } else { //wishListHyperlink.NavigateUrl = link.URL; } * */ } } } the problem is with this: thisshould be defined differently but i do not know how AWSECommerceServicePortTypeChannel service = new AWSECommerceServicePortTypeChannel();

    Read the article

  • Issues with mx:method, mx.rpc.remoting.mxml.RemoteObject, and sub-classing mx.rpc.remoting.mxml.Remo

    - by Ryan Wilson
    I am looking to subclass RemoteObject. Instead of: <mx:RemoteObject ... > <mx:method ... /> <mx:method ... /> </mx:RemoteObject> I want to do something like: <remoting:CustomRemoteObject ...> <mx:method ... /> <mx:method ... /> </remoting:CustomRemoteObject> where CustomRemoteObject extends mx.rpc.remoting.mxml.RemoteObject like so: package remoting { import mx.rpc.remoting.mxml.RemoteObject; public class CustomRemoteObject extends RemoteObject { public function CustomRemoteObject(destination:String=null) { super(destination); } } } However, when doing so and declaring a CustomRemoteObject in MXML as above, the flex compiler shows the error: Could not resolve <mx:method> to a component implementation At first I thought it had something to do with CustomRemoteObject failing to do something, despite that (or since) it had no change except as to the name. So, I copied the source from mx.rpc.remoting.mxml.RemoteObject into CustomRemoteObject and modified it so the only difference was a refactoring of the class and package name. But still, the same error. Unlike many MXML components, I cannot cmd+click <mx:method> in FlashBuilder to open the source. Likewise, I have not found a reference in mx.rpc.remoting.mxml.RemoteObject, mx.rpc.remoting.RemoteObject, or mx.rpc.remoting.AbstractService, and have been unsuccessful in find its source online. Which leads me to the questions in the title: What exactly is <mx:method>? (yes, I know it's a declaration of a RemoteObject method, and I know how to use it, but it's peculiar in regard to other components) Why did my attempt at subclassing RemoteObject fail, despite it effectually being a rename? Perhaps the root, why can mx.rpc.remoting.mxml.RemoteObject as an MXML declaration accept <mx:method> child tags, yet the source of said class cannot when refactored in name only?

    Read the article

  • get current selected button cell placed inside tableview using cocoa

    - by Swati
    hi i have a NSTableView i have two columns A and B B contains some data A contains custom button the button is added to column A using this: Below code is placed inside awakeFromNib method NSButtonCell *buttonCell = [[[NSButtonCell alloc] init] autorelease]; [buttonCell setBordered:NO]; [buttonCell setImagePosition:NSImageOnly]; [buttonCell setButtonType:NSMomentaryChangeButton]; [buttonCell setImage:[NSImage imageNamed:@"uncheck.png"]]; [buttonCell setSelectable:TRUE]; [buttonCell setTag:100]; [buttonCell setTarget:self]; [buttonCell setAction:@selector(selectButtonsForDeletion:)]; [[myTable tableColumnWithIdentifier:@"EditIdentifier"] setDataCell:buttonCell]; Some code in display cell of nstableview: -(void)tableView:(NSTableView *)tableView willDisplayCell:(id)cell forTableColumn:(NSTableColumn *)tableColumn row:(NSInteger)rowIndex { if(tableView == myTable) { if([[tableColumn identifier] isEqualToString:@"DataIdentifier"]) { } else if([[tableColumn identifier] isEqualToString:@"EditIdentifier"]) { NSButtonCell *zCell = (NSButtonCell *)cell; [zCell setTag:rowIndex]; [zCell setTitle:@"abc"]; [zCell setTarget:self]; [zCell setAction:@selector(selectButtonsForDeletion:)]; } } } now i want that when i click on the button the image of button cell gets changed as well as i want to do some coding. When button gets clicked then by default the tableView's reference gets passed. How can i get the button cell reference i looked here for similar problem: Cocoa: how to nest a button inside a Table View cell? but i am unable to add button inside column of NSTableView. How i change the image: - (void)tableView:(NSTableView *)tableView setObjectValue:(id)object forTableColumn:(NSTableColumn *)tableColumn row:(NSInteger)row; { if(tableView == myTable) { if([[tableColumn identifier] isEqualToString:@"EditIdentifier"]) { NSButtonCell *aCell = (NSButtonCell *)[[tableView tableColumnWithIdentifier:@"EditIdentifier"] dataCellForRow:row]; NSInteger index = [[aCell title]intValue]; if([self.selectedIndexesArray count]>0) { if(![self.selectedIndexesArray containsObject:[NSNumber numberWithInt:index]]) { [aCell setImage:[NSImage imageNamed:@"check.png"]]; [self.selectedIndexesArray addObject:[NSNumber numberWithInt:index]]; } else { [aCell setImage:[NSImage imageNamed:@"uncheck.png"]]; [self.selectedIndexesArray removeObjectAtIndex:[selectedIndexesArray indexOfObject:[NSNumber numberWithInt:index]]]; } } else { [aCell setImage:[NSImage imageNamed:@"check.png"]]; [self.selectedIndexesArray addObject:[NSNumber numberWithInt:index]]; } } } } I have debugged the code and found that proper tag and titles are passed but image applies on more than one button cell, this is too very irregular. cant understand how its working!!! Any suggestions what am i doing wrong??

    Read the article

  • Multiple views and source list in a Core Data app

    - by Ellie P.
    I'm working on my first major Cocoa app for an undergraduate research project. The application is document-based and uses Core Data. One of the entities is an abstract entity, Page. Page is parent of several types of pages: ie PageWithHeaderAndFooter, PageWithTwoColumns, BasicPage etc. Page has attributes, such as title and author, that all pages have in common. Each specific type of page has a certain number of layout blocks (PageWithHeaderAndFooter has three: header, footer, body. BasicPage has one: body. etc.) Additionally, all Page subclasses define layout-specific implementations of certain methods. The other relevant entity is Style, which defines the visual look of a Page. (Think of Pages as HTML and Style as CSS.) I would like my app to have an iTunes/Mail-like source list with sections. (One section would be Pages, the other would be Styles.) I have a pretty good idea how to do the sectioned source list (this was a great help). However, after hours of headbanging and fruitless googling, here's what I can't figure out: Pages and Styles listed in the source list, and when you select one of them, all of the relevant fields for that object appear at the right (mostly NSTextViews, pop up menus, etc). I laid that out and did all of the bindings in Interface Builder. The problem is, if my source list contains different types of pages, how do I get a different view to display at the right depending on the type of page selected? For example, if a BasicPage is selected, I want just what you see above: the general page stuff and one NSTextView that corresponds to the one field body of BasicPage. But if I select a PageWithHeaderAndFooter, I want to display the general page stuff plus three NSTextViews (one for header, body, and footer.) If I have a Style selected, I want to display various pop up menus, color wells, etc. For the pages at least, we're only talking about one or more NSTextViews, each of which corresponds to a String attribute of the respective entity. How would you do this? Thank you for your help!

    Read the article

  • WPF Custom Control - Designer looks fine, but I get a runtime issue...

    - by myermian
    MainWindow.xaml <Window x:Class="MainWindow" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:my="clr-namespace:MyStuff;assembly=MyStuff" Title="MainWindow" Height="350" Width="525"> <Grid> <TabControl Margin="5"> <TabItem Header="Start Page" /> <my:XTabItem Header="Tab 1" Image="Resources/icon1.png" /> </TabControl> </Grid> </Window> Generic.xaml <ResourceDictionary xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:local="clr-namespace:MyStuff" > <!-- XTabItem --> <Style TargetType="{x:Type local:XTabItem}"> <Setter Property="Template"> <Setter.Value> <ControlTemplate TargetType="{x:Type local:XTabItem}"> <Border Background="{TemplateBinding Background}" BorderBrush="{TemplateBinding BorderBrush}" BorderThickness="{TemplateBinding BorderThickness}"> <StackPanel Orientation="Horizontal"> <Image Source="{Binding Path=Image, RelativeSource={RelativeSource TemplatedParent}}" Stretch="UniformToFill" MaxHeight="24" /> <TextBlock Text="{TemplateBinding Header}" /> <Button Content="X" /> </StackPanel> </Border> </ControlTemplate> </Setter.Value> </Setter> </Style> </ResourceDictionary> XTabItem.cs using System; using System.ComponentModel; using System.Windows; using System.Windows.Controls; using System.Windows.Media; namespace MyStuff { public class XTabItem : TabItem { #region Dependency Properties public static readonly DependencyProperty ImageProperty; #endregion #region Constructors / Initializer static XTabItem() { //Initialize the control as "lookless". DefaultStyleKeyProperty.OverrideMetadata(typeof(XTabItem), new FrameworkPropertyMetadata(typeof(XTabItem))); //Setup the dependency properties. ImageProperty = DependencyProperty.Register("Image", typeof(ImageSource), typeof(XTabItem), new UIPropertyMetadata(null)); } #endregion #region Custom Control Properties (Image) /// <summary> /// The image (icon) displayed by inside the tab header. /// </summary> /// <remarks>The image is specified in XAML as an absolute or relative path.</remarks> [Description("The image displayed by the button"), Category("Optional Properties")] public ImageSource Image { get { return (ImageSource)GetValue(ImageProperty); } set { SetValue(ImageProperty, value); } } #endregion } } Exception at line #9 () : XamlParseException : 'Provide value on 'System.Windows.Baml2006.TypeConverterMarkupExtension' threw an exception.' Line number '9' and line position '27'.

    Read the article

  • Google Bookmarks Accelerator for IE8

    - by MACHiNESMiTH
    To Editors: Sorry, I didnt realise the question thing till you pointed it out. Also I didn't know about the appengine tag, I'm assuming it was selected by mistake from that JS autosuggestion box (it usually happens with me, I run a P3) my apologies for that too. I've edited it now, if it doesnt work let me know. Hi all, I'm making (or at least trying to make) a Google bookmarks accelerator for IE8, but I keep running into "Internet Explorer could not install this accelerator. There was a problem with the Accelerator's information." Does anyone know why this is happening? Here is the code I've made <?xml version="1.0" encoding="UTF-8" ?> <os:openServiceDescription xmlns="http://www.microsoft.com/schemas/openservicedescription/1.0"> <os:homepageUrl>http://www.google.com/bookmarks</os:homepageUrl> <os:display> <os:description>Add this page to GoogleBookmarks</os:description> <os:name>Add to GoogleBookmarks</os:name> <os:icon>http://www.google.com/favicon.ico</os:icon> </os:display> <os:activity category="Bookmarks"> <os:activityAction context="document"> <os:execute method="get" action="http://www.google.com/bookmarks/mark?op=add&output=popup"> <os:parameter name="bkmk" value="{documentUrl}" /> <os:parameter name="title" value="{documentTitle}" /> <os:parameter name="annotation" value="{selection}" /> </os:execute> </os:activityAction> </os:activity> </os:openServiceDescription> These are the references I used: MSDN Developers Guide MSDN Format Specification Unofficial Google API (used as a look up so far) and yes i know that I cannot send document variables between schemes (HTTP - HTTPS, for example) or between servers in different security zones (Intranet - Internet etc) Also, if this is the wrong place, what are the recommended sites and/or forums for xml related posts? (not really questions - but more like full blown detailed rant like posts) Thanks

    Read the article

  • Tomcat 403 error after LDAP authentication.

    - by user352636
    I'm currently trying to use an LDAP server to authenticate users who are trying to access our Tomcat setup. I believe I have managed to get the LDAP authentication working in the form of a JNDI realm call from Tomcat, but immediately after the user enters their password Tomcat starts throwing 403 (permission denied) errors for everything except from the root page (ttp://localhost:1337/). I have no idea why this is happening. I am following the example at http://blog.mc-thias.org/?title=tomcat_ldap_authentication&more=1&c=1&tb=1&pb=1 . server.xml (the interesting/changed bits) <Realm className="org.apache.catalina.realm.JNDIRealm" debug="99" connectionURL="ldap://localhost:389" userPattern="uid={0},ou=People,o=test,dc=company,dc=uk" userSubTree="true" roleBase="ou=Roles,o=test,dc=company,dc=uk" roleName="cn" roleSearch="memberUid={1}" /> <Valve className="org.apache.catalina.authenticator.SingleSignOn" /> web.xml (the interesting/changed bits) <security-constraint> <display-name>Security Constraint</display-name> <web-resource-collection> <web-resource-name>Protected Area</web-resource-name> <!-- Define the context-relative URL(s) to be protected --> <url-pattern>/*</url-pattern> <!-- If you list http methods, only those methods are protected --> </web-resource-collection> <auth-constraint> <!-- Anyone with one of the listed roles may access this area --> <role-name>admin</role-name> <role-name>regular</role-name> </auth-constraint> </security-constraint> <!-- Default login configuration uses form-based authentication --> <login-config> <auth-method>BASIC</auth-method> </login-config> <!-- Security roles referenced by this web application --> <security-role> <role-name>admin</role-name> <role-name>regular</role-name> </security-role> I cannot access my LDAP setup at the moment, but I believe it is alright as the login is accepted by the BASIC auth method, it's just tomcat that is rejecting it. The roles should be as defined in web.xml - admin and regular. If there is any other information you require me to provide, please just ask! My thanks in advance to anyone who can help, and my apologies for any major mistakes I have made - yesterday was pretty much the first time I'd ever heard of LDAP =D. EDIT: Fixed the second xml segment. Apologies for the formating-fail.

    Read the article

  • WinRT ControlTemplate ItemsPanel

    - by user1427149
    I'm new to WinRT and am trying to create a standard gridview which has a group heading with a number of tiles beneath it. That bit is easy. I'm trying to modify it so that beneath the grid of tiles I can also add a footer using the containers style: <GridView x:Name="itemGridView" AutomationProperties.AutomationId="ItemGridView" AutomationProperties.Name="Grouped Items" Margin="116,0,40,46" ItemsSource="{Binding Source={StaticResource groupedItemsViewSource}}" ItemTemplate="{StaticResource Project200x200ItemTemplate}" SelectionMode="None" IsItemClickEnabled="True" ItemClick="ItemView_ItemClick"> <GridView.ItemsPanel> <ItemsPanelTemplate> <VirtualizingStackPanel Orientation="Horizontal"/> </ItemsPanelTemplate> </GridView.ItemsPanel> <GridView.GroupStyle> <GroupStyle> <GroupStyle.HeaderTemplate> <DataTemplate> <Grid Margin="1,0,0,6"> <Button AutomationProperties.Name="Group Title" Content="{Binding Name}" Click="Header_Click" Style="{StaticResource TextButtonStyle}" FontWeight="{Binding IsSelected, ConverterParameter=FontWeight, Converter={StaticResource BooleanToFontWeightConverter}}" /> </Grid> </DataTemplate> </GroupStyle.HeaderTemplate> <GroupStyle.Panel> <ItemsPanelTemplate> <VariableSizedWrapGrid Background="Red" Orientation="Vertical" Margin="0,0,40,0" /> </ItemsPanelTemplate> </GroupStyle.Panel> <GroupStyle.ContainerStyle> <Style TargetType="GroupItem"> <Setter Property="Template"> <Setter.Value> <ControlTemplate> <StackPanel> <ContentPresenter/> <ItemsPresenter/> <TextBlock Text="*** End of group ***"/> </StackPanel> </ControlTemplate> </Setter.Value> </Setter> </Style> </GroupStyle.ContainerStyle> </GroupStyle> </GridView.GroupStyle> </GridView> This almost works but after adding the container style, the grid of tiles no longer shows... the group header and 'End of group' textblock is showing, but I've lost the tile grid. Can anyone spot what I'm doing wrong...?

    Read the article

  • Keyboard navigation in typical WPF Business Line Application

    - by Guge
    I have a WPF business line application with a tabbed userinterface, menus and toolbars. The application must be navigable through a keyboard, some users like to minimize mouse use. I have thrown together the included XAML sample to illustrate the problem of keyboard navigation. Using the tab key I can only get to the menu, and then to the toolbar. I have tried various attached properties for KeyboardNavigation and FocusManager, but I have not succeeded in the following goals: Navigate to the contents of the first tabpage using the keyboard. Disable tab key navigation from tabpage to menu and toolbar. Change tabpage using Ctrl-Tab. <Window x:Class="WpfApplication4.MainWindow" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="MainWindow" Height="408" Width="569" > <DockPanel> <Menu DockPanel.Dock="Top"> <MenuItem Header="_File"> <MenuItem Header="Open"/> </MenuItem> <MenuItem Header="_Edit"></MenuItem> </Menu> <ToolBarTray DockPanel.Dock="Top"> <ToolBar> <Label Target="{Binding ElementName=SearchBox}"> _Search </Label> <TextBox Name="SearchBox" Width="80"></TextBox> <Button>Search</Button> </ToolBar> </ToolBarTray> <StatusBar DockPanel.Dock="Bottom"> Statusbar here </StatusBar> <TabControl> <TabItem Header="File 1"> <WrapPanel> <Button>Click</Button> <CheckBox>Check</CheckBox> <Slider Minimum="0" Maximum="100" Width="150"/> </WrapPanel> </TabItem> <TabItem Header="File 2"> </TabItem> <TabItem Header="File 3"> </TabItem> </TabControl> </DockPanel>

    Read the article

  • Dynamically writing page titles and active classes with php

    - by toomanyairmiles
    For some time now I've been using the following code to dynamically write in html page titles and add an active class to menu items. Is this still a good why to achieve this or are there better/smarter/optimal ways of achieving the same thing? <?php echo (basename($_SERVER['SCRIPT_FILENAME'])=='contact.php'? 'class="active"' : '');?> Menu example <ul id="nav"> <li><a href="index.php" target="_parent" <?php echo (basename($_SERVER['SCRIPT_FILENAME'])=='index.php'? 'class="active"' : '');?>><span>Home</span></a></li> <li><a href="services.php" target="_parent" <?php echo (basename($_SERVER['SCRIPT_FILENAME'])=='services.php'? 'class="active"' : '');?><?php echo (basename($_SERVER['SCRIPT_FILENAME'])=='services-landlords.php'? 'class="active"' : '');?><?php echo (basename($_SERVER['SCRIPT_FILENAME'])=='services-sellers.php'? 'class="active"' : '');?><?php echo (basename($_SERVER['SCRIPT_FILENAME'])=='services-tennants.php'? 'class="active"' : '');?>><span>Our Services</span></a></li> <li><a href="for-sale.php" target="_parent" <?php echo (basename($_SERVER['SCRIPT_FILENAME'])=='sales.php'? 'class="active"' : '');?>><span>Sales</span></a></li> <li><a href="to-let.php" target="_parent" <?php echo (basename($_SERVER['SCRIPT_FILENAME'])=='lettings.php'? 'class="active"' : '');?>><span>Lettings</span></a></li> <li><a href="register.php" target="_parent" <?php echo (basename($_SERVER['SCRIPT_FILENAME'])=='register.php'? 'class="active"' : '');?><?php echo (basename($_SERVER['SCRIPT_FILENAME'])=='register-thanks.php'? 'class="active"' : '');?>><span>Register</span></a></li> <li><a href="contact.php" target="_parent" <?php echo (basename($_SERVER['SCRIPT_FILENAME'])=='contact.php'? 'class="active"' : '');?>><span>Contact Us</span></a></li> </ul> Page title Example <?php echo (basename($_SERVER['SCRIPT_FILENAME'])=='services.php'? 'Services' : '');?> <?php echo (basename($_SERVER['SCRIPT_FILENAME'])=='services-landlords.php'? 'Services for Landlords' : '');?>

    Read the article

  • jQuery ajaxSubmit ignored by IE8

    - by George Burrell
    Hi there, I am combing the jQuery validation plug-in with the jQuery Form Plugin to submit the form via AJAX. This works perfectly in Firefox & Chrome, but (as usual) Internet Explorer is being a pain. For reasons that are alluding me, IE is ignoring the ajaxSubmit, as a result it submits the form in the normal fashion. I've followed the validation plug-in's documentation when constructing my code: JS: $(document).ready(function() { var validator = $("#form_notify").validate({ messages: { email: { required: 'Please insert your email address. Without your email address we will not be able to contact you!', email:'Please enter a valid email address. Without a valid email address we will not be able to contact you!' } }, errorLabelContainer: "#error", success: "valid", submitHandler: function(form) {$(form).ajaxSubmit();} }); $('#email').blur(function() { if (validator.numberOfInvalids() 0) { $("#label").addClass("label_error"); return false; } else {$("#label").removeClass("label_error");} }); $('#form_notify').submit(function() { if (validator.numberOfInvalids() == 0) { $(this).fadeOut('fast', function() {$('#thank-you').fadeIn();}); return true; } return false; }); }); Form HTML: <form id="form_notify" class="cmxform" name="form_notify" action="optin.pl" method="get"> <fieldset> <div class="input"> <label id="label" for="email">Email Address:</label> <input type="text" id="email" name="email" value="" title="email address" class="{required:true, email:true}"/> <div class="clearfix"></div> </div> <input type="hidden" name="key" value="sub-745-9.224;1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0;;subscribe-224.htm"> <input type="hidden" name="followup" value="19"> <input type="submit" name="submit" id="submit-button" value="Notify Me"> <div id="error"></div> </fieldset> </form> I can't understand what is causing IE to act differently, any assistance would be greatly appreciated. I can provide more information if needed. Thanks in advance!

    Read the article

  • Finding related tags using acts-as-taggable-on

    - by user284194
    In tag#show I list all entries with that tag. At the bottom of the page I'd like to have something like: "Related Tags: linked, list, of, related tags" My view looks like: <h2><%= link_to 'Tag', tags_path %>: <%= @tag.name.titleize %></h2> <% @entries.each do |entry| %> <h2><%= link_to h(entry.name), entry %></h2> <%- unless entry.phone.empty? -%> <p><%= h(entry.phone) %></p> <%- end -%> <%- unless entry.address.empty? -%> <p><%= h(entry.address) %></p> <%- end -%> <%- unless entry.description.empty? -%> <p><%= h(entry.description) %></p> <%- end -%> <p2><%= link_to "more...", entry %><p2> <% end %> Related Tags: <% @related.each do |tag| %> <%= link_to h(tag.tags), tag %> <% end %> tags_controller.rb: def show @title = Tag.find(params[:id]).name @tag = Tag.find(params[:id]) @entries = Entry.paginate(Entry.find_tagged_with(@tag), :page => params[:page], :per_page => 10, :order => "name") @related = Entry.tagged_with(@tag, :on => :tags) end Every entry has at least one tag, it's required by the entry model. I'd like duplicate tags ignored and the current tag (the tag that the list belongs to) ignored. My current code displays this: Related Tags: Gardens Gardens ToursGardens Gardens is a link to the entry, not the tag gardens. ToursGardens is a link to the entry that includes those tags. My desired result would be: Related Tags: Gardens, Tours Each link would link to it's associated tag. Can anyone help me achieve this? I tried using a div_for but I don't think that was right.

    Read the article

  • i want to have some cross browser consistency on my fieldsets, do you know how can i do it?

    - by Omar
    i have this problem with fieldsets... have a look at http://i.imgur.com/IRrXB.png is it possible to achieve what i want with css??? believe me, i tried! as you can see on the img, i just want the look of the legend to be consistent across browsers, i want it to use the width of the fieldset no more (like chrome and ie) no less (like firefox), dont worry about the rounded corners and other issues, thats taken care of. heres the the core i'm using. CSS <style type="text/css"> fieldset {margin: 0 0 10px 0;padding: 0; border:1px solid silver; background-color: #f9f9f9; -moz-border-radius:5px; -webkit-border-radius:5px; border-radius:5px} fieldset p{clear:both;margin:.3em 0;overflow:hidden;} fieldset label{float:left;width:140px;display:block;text-align:right;padding-right:8px;margin-right: 2px;color: #4a4a4a;} fieldset input, fieldset textarea {margin:0;border:1px solid #ddd;padding:3px 5px 3px 5px;} fieldset legend { background: #C6D1E8; position:relative; left: -1px; margin: 0; width: 100%; padding: 0px 5px; font-size: 1.11em; font-weight: bold; text-align:left; border: 1px solid silver; -webkit-border-top-left-radius: 5px; -webkit-border-top-right-radius: 5px; -moz-border-radius-topleft: 5px; -moz-border-radius-topright: 3px; border-top-left-radius: 5px; border-top-right-radius: 5px; } #md {width: 400px;} </style> HTML <div id="md"> <fieldset> <legend>some title</legend> <p> <label>Login</label> <input type="text" /> </p> <p> <label>Password</label> <input type="text" /> </p> <p><label>&nbsp;</label> <input type="submit"> </p> </fieldset> </div>

    Read the article

  • Query an XmlDocument without getting a 'Namespace prefix is not defined' problem

    - by Dan Revell
    I've got an Xml document that both defines and references some namespaces. I load it into an XmlDocument object and to the best of my knowledge I create a XmlNamespaceManager object with which to query Xpath against. Problem is I'm getting XPath exceptions that the namespace "my" is not defined. How do I get the namespace manager to see that the namespaces I am referencing are already defined. Or rather how do I get the namespace definitions from the document to the namespace manager. Furthermore tt strikes me as strange that you have to provide a namespace manager to the document which you create from the documents nametable in the first place. Even if you need to hardcode manual namespaces why can't you add them directly to the document. Why do you always have to pass this namespace manager with every single query? What can't XmlDocument just know? The Code: XmlDocument xmlDoc = new XmlDocument(); xmlDoc.Load(programFiles + @"Common Files\Microsoft Shared\web server extensions\12\TEMPLATE\FEATURES\HfscBookingWorkflow\template.xml"); XmlNamespaceManager ns = new XmlNamespaceManager(xmlDoc.NameTable); XmlNode referenceNode = xmlDoc.SelectSingleNode("/my:myFields/my:ReferenceNumber", ns); referenceNode.InnerXml = this.bookingData.ReferenceNumber; XmlNode titleNode = xmlDoc.SelectSingleNode("/my:myFields/my:Title", ns); titleNode.InnerXml = this.bookingData.FamilyName; ... The Xml: <?xml version="1.0" encoding="UTF-8" ?> <?mso-infoPathSolution name="urn:schemas-microsoft-com:office:infopath:Inspection:-myXSD-2010-01-15T18-21-55" solutionVersion="1.0.0.104" productVersion="12.0.0" PIVersion="1.0.0.0" ?> <?mso-application progid="InfoPath.Document" versionProgid="InfoPath.Document.2"?> - <my:myFields xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xhtml="http://www.w3.org/1999/xhtml" xmlns:my="http://schemas.microsoft.com/office/infopath/2003/myXSD/2010-01-15T18:21:55" xmlns:xd="http://schemas.microsoft.com/office/infopath/2003"> <my:DateRequested xsi:nil="true" /> <my:DateVisited xsi:nil="true" /> <my:ReferenceNumber /> <my:FireCall>false</my:FireCall> ...

    Read the article

< Previous Page | 407 408 409 410 411 412 413 414 415 416 417 418  | Next Page >