Search Results

Search found 10945 results on 438 pages for 'ms office'.

Page 411/438 | < Previous Page | 407 408 409 410 411 412 413 414 415 416 417 418  | Next Page >

• Ubuntu: Failure to login with multiple video adapters

  - by tsilb

  Forgive my ignorance, for I am a complete linux noob. I have a computer with three video cards and six monitors. Works great on Windows. Trying to get it to run Ubuntu as well. It loads fine when I have it configured to run on one adapter; detects both screens, runs ok. But I want to turn the other 4 monitors on and run the whole thing as one extended desktop (one session, etc). So I downloaded and installed the newest ATI driver for Linux, which seems to work, kinda. I ran this to set up the screens: aticonfig --adapter=all --initial -f Now when I boot, Ubuntu seems to turn on all the screens (3 viewports, each with two cloned displays from what I can tell). When I enter my login info OR move the mouse off the main screen, the screens freeze and the kbd/ms become unresponsive. aticonfig generated xorg.conf included below. Have tried the following: aticonfig -initial -f - works, but only detects the primary adapter and 2 screens aticccle - Tells me I have to reboot after enabling the other cards. Then goes into above described freezing state. aticonfig --adapter=all --initial -f - see above Manually editing xorg.conf file with my limited knowledge - Was able to get two adapters running, but only the second adapter initialized while the primary stopped at the Ubuntu boot screen. Was unable to see the login prompt. Froze after I logged in blindly (was able to hear the login sound). Using generic "radeon" driver instead of ATI Proprietary driver with the above init attempts Toggling xinerama Various combinations of the above Hardware: Intel Core 2 Quad q6600 8GB DDR2 (3x) ATI Radeon HD 4680 5 monitors (21W, 21W, 22W Portrait, 22W Portrait, 19")and an HDTV (26"W, HDMI) in a horizontal arrangement I know next to nothing about Linux/Ubuntu aside from basic filesystem navigation, editing text files, and accessing my local and networked Windows stores and shares. Basically this is the most advanced thing I've had to do. I installed today. Please advise how to make this configuration work. my xorg.conf: Section "ServerLayout" Identifier "Layout0" Screen 0 "aticonfig-Screen[0]-0" 0 0 Screen "aticonfig-Screen[1]-0" RightOf "aticonfig-Screen[0]-0" Screen "aticonfig-Screen[2]-0" RightOf "aticonfig-Screen[1]-0" Option "RenderAccel" "true" Option "AllowGLXWithComposite" "true" EndSection Section "Files" EndSection Section "Module" EndSection Section "ServerFlags" Option "Xinerama" "0" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "aticonfig-Monitor[1]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "aticonfig-Monitor[2]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "aticonfig-Device[1]-0" Driver "fglrx" BusID "PCI:3:0:0" EndSection Section "Device" Identifier "aticonfig-Device[2]-0" Driver "fglrx" BusID "PCI:4:0:0" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "aticonfig-Screen[1]-0" Device "aticonfig-Device[1]-0" Monitor "aticonfig-Monitor[1]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "aticonfig-Screen[2]-0" Device "aticonfig-Device[2]-0" Monitor "aticonfig-Monitor[2]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

  Read the article

• Problem Disabling Roaming Profiles on Grouped Users

  - by user43207

  I'm having some serious issues getting a group of users to stop using roaming profiles. As expected, I have roaming profiles enabled accross the domain. - But am doing GPO filtering, limiting the scope. I originally had it set to authenticated users for Roaming, but as the domain has branched out to multiple locations, I've limited the scope to only people that are near the central office. The GPO that I have linked filtered to a group I have created that include users that I don't want to have roaming profiles. This GPO is sitting at the root of the domain, with the "Forced" setting enabled, so it should override any setting below it. *On a side note, it is the ONLY GPO that I have set to "Forced" right now. I know the GPO is working, since I can see the original registy settings on a user that logged in under roaming profiles - and then that same user logging in after I made the Group Policy changes, the registry reflects a local profile. But unfortunately, even after making those settings - the user is given a roaming profile on one of the servers. A gpresult of that same user account (after the updated gpo) is listed in the code block below. You can see right at the top of that output, that it is infact dealing with a roaming profile. - And sure enough, on the server that's hosting the file share for roaming profiles, it creates a folder for the user once they log in. For testing purposes, I've deleted all copies of the user's profile, roaming and local. But the problem is still here. - So I'm aparently missing something in the group policy settings on a wider scale. Would anybody be able to point me in the direction of what I'm missing here? *gpresult /r*** Microsoft (R) Windows (R) Operating System Group Policy Result tool v2.0 Copyright (C) Microsoft Corp. 1981-2001 Created On 5/15/2010 at 8:59:00 AM RSOP data for ** on * : Logging Mode OS Configuration: Member Workstation OS Version: 6.1.7600 Site Name: N/A Roaming Profile: \\profiles$** Local Profile: C:\Users*** Connected over a slow link?: No USER SETTINGS CN=*****,OU=*****,OU=*****,OU=*****,DC=*****,DC=***** Last time Group Policy was applied: 5/15/2010 at 8:52:02 AM Group Policy was applied from: *****.*****.com Group Policy slow link threshold: 500 kbps Domain Name: USSLINDSTROM Domain Type: Windows 2000 Applied Group Policy Objects ----------------------------- ForceLocalProfilesOnly InternetExplorer_***** GlobalPasswordPolicy The following GPOs were not applied because they were filtered out ------------------------------------------------------------------- DAgentFirewallExceptions Filtering: Denied (Security) WSAdmin_***** Filtering: Denied (Security) NetlogonFirewallExceptions Filtering: Not Applied (Empty) NetLogon_***** Filtering: Denied (Security) WSUSUpdateScheduleManualInstall Filtering: Denied (Security) WSUSUpdateScheduleDaily_0300 Filtering: Denied (Security) WSUSUpdateScheduleThu_0100 Filtering: Denied (Security) AlternateSSLFirewallExceptions Filtering: Denied (Security) SNMPFirewallExceptions Filtering: Denied (Security) WSUSUpdateScheduleSun_0100 Filtering: Denied (Security) SQLServerFirewallExceptions Filtering: Denied (Security) WSUSUpdateScheduleTue_0100 Filtering: Denied (Security) WSUSUpdateScheduleSat_0100 Filtering: Denied (Security) DisableUAC Filtering: Denied (Security) ICMPFirewallExceptions Filtering: Denied (Security) AdminShareFirewallExceptions Filtering: Denied (Security) GPRefreshInterval Filtering: Denied (Security) ServeRAIDFirewallExceptions Filtering: Denied (Security) WSUSUpdateScheduleFri_0100 Filtering: Denied (Security) BlockFirewallExceptions(8400-8410) Filtering: Denied (Security) WSUSUpdateScheduleWed_0100 Filtering: Denied (Security) Local Group Policy Filtering: Not Applied (Empty) WSUS_***** Filtering: Denied (Security) LogonAsService_Idaho Filtering: Denied (Security) ReportServerFirewallExceptions Filtering: Denied (Security) WSUSUpdateScheduleMon_0100 Filtering: Denied (Security) TFSFirewallExceptions Filtering: Denied (Security) Default Domain Policy Filtering: Not Applied (Empty) DenyServerSideRoamingProfiles Filtering: Denied (Security) ShareConnectionsRemainAlive Filtering: Denied (Security) The user is a part of the following security groups --------------------------------------------------- Domain Users Everyone BUILTIN\Users BUILTIN\Administrators NT AUTHORITY\INTERACTIVE CONSOLE LOGON NT AUTHORITY\Authenticated Users This Organization LOCAL *****Users VPNAccess_***** NetAdmin_***** SiteAdmin_***** WSAdmin_***** VPNAccess_***** LocalProfileOnly_***** NetworkAdmin_***** LocalProfileOnly_***** VPNAccess_***** NetAdmin_***** Domain Admins WSAdmin_***** WSAdmin_***** ***** ***** Schema Admins ***** Enterprise Admins Denied RODC Password Replication Group High Mandatory Level

  Read the article

• Postfix/SMTPD Relay Access Denied when sending outside the network

  - by David

  I asked a very similar question some 4 or 5 months ago, but haven't tracked down a suitable answer. I decided to post a new question so that I can ... a) Post updated info b) post my most current postconf -n output When a user sends mail from inside the network (via webmail) to email addresses both inside and outside the network, the email is delivered. When a user with an email account on the system sends mail from outside the network, using the server as the relay, to addresses inside the network, the email is delivered. But [sometimes] when a user connects via SMTPD to send email to an external address, a Relay Access Denied error is returned: Feb 25 19:33:49 myers postfix/smtpd[8044]: NOQUEUE: reject: RCPT from host-68-169-158-182.WISOLT2.epbfi.com[68.169.158.182]: 554 5.7.1 <host-68-169-158-182.WISOLT2.epbfi.com[68.169.158.182]>: Client host rejected: Access denied; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<my-computer-name> Feb 25 19:33:52 myers postfix/smtpd[8044]: disconnect from host-68-169-158-182.WISOLT2.epbfi.com[68.169.158.182] Sending this through Microsoft Outlook 2003 generates the above log. However, sending through my iPhone, with the exact same settings, goes through fine: Feb 25 19:37:18 myers postfix/qmgr[3619]: A2D861302C9: from=<[email protected]>, size=1382, nrcpt=1 (queue active) Feb 25 19:37:18 myers amavis[2799]: (02799-09) FWD via SMTP: <[email protected]> -> <[email protected]>,BODY=7BIT 250 2.0.0 Ok, id=02799-09, from MTA([127.0.0.1]:10025): 250 2.0.0 Ok: queued as A2D861302C9 Feb 25 19:37:18 myers amavis[2799]: (02799-09) Passed CLEAN, [68.169.158.182] [68.169.158.182] <[email protected]> -> <[email protected]>, Message-ID: <[email protected]>, mail_id: yMLvzVQJloFV, Hits: -9.607, size: 897, queued_as: A2D861302C9, 6283 ms Feb 25 19:37:18 myers postfix/lmtp[8752]: 2ED3A1302C8: to=<[email protected]>, relay=127.0.0.1[127.0.0.1]:10024, delay=6.6, delays=0.25/0.01/0.19/6.1, dsn=2.0.0, status=sent (250 2.0.0 Ok, id=02799-09, from MTA([127.0.0.1]:10025): 250 2.0.0 Ok: queued as A2D861302C9) Feb 25 19:37:18 myers postfix/qmgr[3619]: 2ED3A1302C8: removed Outgoing Settings on Outlook 2003 match the settings on my iPhone: SMTP server: mail.my-domain.com Username: My full email address Uses SSL Server Port 587 Now, here's postconf -n. I realize the "My Networks" Parameter is a bit nasty. I have these IP addresses in here for just this reason, as others have been complaining of this problem too: alias_database = hash:/etc/postfix/aliases alias_maps = $alias_database append_dot_mydomain = no biff = no broken_sasl_auth_clients = yes command_directory = /usr/sbin config_directory = /etc/postfix content_filter = amavisfeed:[127.0.0.1]:10024 daemon_directory = /usr/libexec/postfix debug_peer_level = 2 disable_vrfy_command = yes html_directory = no inet_interfaces = all mail_owner = postfix mail_spool_directory = /var/spool/mail mailbox_size_limit = 0 mailq_path = /usr/bin/mailq manpage_directory = /usr/share/man message_size_limit = 20480000 mydestination = $myhostname, localhost, localhost.$mydomain mydomain = my-domain.com myhostname = myers.my-domain.com mynetworks = 127.0.0.0/8, 74.125.113.27, 74.125.82.49, 74.125.79.27, 209.85.161.0/24, 209.85.214.0/24, 209.85.216.0/24, 209.85.212.0/24, 209.85.160.0/24 myorigin = $myhostname newaliases_path = /usr/bin/newaliases queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.3.3/README_FILES receive_override_options = no_address_mappings recipient_delimiter = + relay_domains = $mydestination sample_directory = /usr/share/doc/postfix-2.3.3/samples sendmail_path = /usr/sbin/sendmail setgid_group = postdrop smtp_bind_address = my-primary-server's IP address smtpd_banner = mail.my-domain.com smtpd_helo_required = yes smtpd_sasl_auth_enable = yes smtpd_sasl_path = private/auth smtpd_sasl_type = dovecot smtpd_tls_auth_only = yes smtpd_tls_cert_file = /etc/ssl/mailserver/postfix.pem smtpd_tls_key_file = /etc/ssl/mailserver/private/postfix.pem smtpd_tls_loglevel = 3 smtpd_tls_received_header = no smtpd_tls_session_cache_timeout = 3600s smtpd_use_tls = yes tls_random_source = dev:/dev/urandom unknown_local_recipient_reject_code = 554 virtual_alias_maps = mysql:/etc/postfix/mysql-virtual-alias-maps.cf,mysql:/etc/postfix/mysql-email2email.cf virtual_gid_maps = static:5000 virtual_mailbox_base = /var/vmail virtual_mailbox_domains = mysql:/etc/postfix/mysql-virtual-mailbox-domains.cf virtual_mailbox_maps = mysql:/etc/postfix/mysql-virtual-mailbox-maps.cf virtual_minimum_uid = 5000 virtual_transport = dovecot virtual_uid_maps = static:5000 If anyone has any ideas and can help me finally solve this issue once and for all, I'd be eternally grateful.

  Read the article

• Apache logs 200 instead of 404

  - by elle

  I've been getting the following in my apache access log: "GET /work//?module=www&section=working=../../../../../../../../../../../../../../../../../../../../../../../..//proc/self/environ%0000 HTTP/1.1" 200 5187 "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.12) Gecko/20101026 Firefox/3.6.12\",\"Mozilla/5.0 (Windows; U; Windows NT 5.1; pl-PL; rv:1.8.1.24pre) Gecko/20100228 K-Meleon/1.5.4\",\"Mozilla/5.0 (X11; U; Linux x86_64; en-US) AppleWebKit/540.0 (KHTML,like Gecko) Chrome/9.1.0.0 Safari/540.0\",\"Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Comodo_Dragon/4.1.1.11 Chrome/4.1.249.1042 Safari/532.5\",\"Mozilla/5.0 (X11; U; Linux i686 (x86_64); en-US; rv:1.9.0.16) Gecko/2009122206 Firefox/3.0.16 Flock/2.5.6\",\"Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US) AppleWebKit/533.1 (KHTML, like Gecko) Maxthon/3.0.8.2 Safari/533.1\",\"Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US; rv:1.8.1.8pre) Gecko/20070928 Firefox/2.0.0.7 Navigator/9.0RC1\",\"Opera/9.99 (Windows NT 5.1; U; pl) Presto/9.9.9\",\"Mozilla/5.0 (Windows; U; Windows NT 6.1; zh-HK) AppleWebKit/533.18.1 (KHTML, like Gecko) Version/5.0.2 Safari/533.18.5\",\"Seamonkey-1.1.13-1(X11; U; GNU Fedora fc 10) Gecko/20081112\",\"Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; Win64; x64; Trident/5.0; .NET CLR 2.0.50727; SLCC2; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; Zune 4.0; Tablet PC 2.0; InfoPath.3; .NET4.0C; .NET4.0E)\",\"Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; WOW64; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; MS-RTC LM 8; .NET4.0C; .NET4.0E; InfoPath.3)" If I try the URL, I get a 404 instead of 200 which the above request received. Is there a way I can confirm that the 200 was real and not spoofed? Where is the long info on the client coming from?

  Read the article

• Tunnel is up but cannot ping directly connected network

  - by drmanalo

  We configured a site-to-site VPN and here is the topology. I control the network on the left but not the one on the right. All devices in our network has public IPs. Server---ASA5505---Cisco887======Internet=====ASA5510---devices I can see the tunnel is up and can do extended ping using a loopback interface. From the 10.175 and 10.165 networks, they can also ping my loopback address. I can also dial in using a Cisco VPN client, and can connect to the devices on the right. #show crypto session Crypto session current status Interface: Vlan3 Profile: xxx-profile Session status: UP-ACTIVE Peer: 213.121.x.x port 500 IKEv1 SA: local 77.245.x.x/500 remote 213.121.x.x/500 Active IPSEC FLOW: permit ip 10.0.20.0/255.255.255.240 10.175.0.0/255.255.128.0 Active SAs: 0, origin: crypto map IPSEC FLOW: permit ip 10.0.20.0/255.255.255.240 10.165.0.0/255.255.192.0 Active SAs: 2, origin: crypto map #ping 10.165.29.39 source loopback 2 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.165.29.39, timeout is 2 seconds: Packet sent with a source address of 10.0.20.1 !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 16/17/20 ms My problem is the devices on the right cannot reach my server. They could only ping the loopback address and nothing else. I'm pasting some diagnostics related to routing thinking perhaps routing is my issue. I can paste all the running-config on my side of network if needed. #show ip int brief Interface IP-Address OK? Method Status Protocol ATM0 unassigned YES NVRAM administratively down down Ethernet0 unassigned YES NVRAM administratively down down FastEthernet0 unassigned YES unset up up connected to ASA FastEthernet1 unassigned YES unset administratively down down FastEthernet2 unassigned YES unset administratively down down FastEthernet3 unassigned YES unset up up Loopback1 10.0.20.65 YES NVRAM up up Loopback2 10.0.20.1 YES NVRAM up up Virtual-Template1 77.245.x.x YES unset up down Virtual-Template2 77.245.x.x YES unset up down Vlan1 unassigned YES unset down down Vlan3 77.245.x.x YES NVRAM up up connected to the Internet #show run | section ip route ip route 0.0.0.0 0.0.0.0 77.245.x.x ip route 213.121.240.36 255.255.255.255 Vlan3 #show access-list Extended IP access list 102 10 permit ip 10.0.20.0 0.0.0.15 10.175.0.0 0.0.127.255 (3332 matches) 20 permit ip 10.0.20.0 0.0.0.15 10.165.0.0 0.0.63.255 (3498 matches) #show vlan-switch VLAN Name Status Ports ---- -------------------------------- --------- ------------------------------- 1 default active 3 VLAN0003 active Fa0, Fa1, Fa2, Fa3 1002 fddi-default act/unsup 1003 token-ring-default act/unsup 1004 fddinet-default act/unsup 1005 trnet-default act/unsup #show ip route Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP + - replicated route, % - next hop override Gateway of last resort is 77.245.x.x to network 0.0.0.0 S* 0.0.0.0/0 [1/0] via 77.245.x.x 10.0.0.0/8 is variably subnetted, 5 subnets, 3 masks C 10.0.20.0/28 is directly connected, Loopback2 L 10.0.20.1/32 is directly connected, Loopback2 C 10.0.20.64/28 is directly connected, Loopback1 L 10.0.20.65/32 is directly connected, Loopback1 S 10.165.0.0/18 [1/0] via 213.121.x.x 77.0.0.0/8 is variably subnetted, 3 subnets, 3 masks S 77.0.0.0/8 [1/0] via 77.245.x.x C 77.245.x.x/29 is directly connected, Vlan3 L 77.245.x.x/32 is directly connected, Vlan3 213.121.x.0/32 is subnetted, 1 subnets S 213.121.x.x is directly connected, Vlan3 I read some of the posts here which lead to NATing issue but I'not sure of my next step. Should I translate my public address to private and route it to the loopback address? (only guessing) CISCO VPN site to site Site-to-Site VPN between two ASA 5505s only working in one direction Hope someone could help. Thanks in advance!

  Read the article

• What are the pitfalls of hardlinked files on my desktop PC?

  - by MountainX

  All the identical-content files on my PC are now hardlinked. (My data is completely de-duplicated. It is a consequence of the way I copied my data from my old computer.) What pitfalls do I need to be aware of now that certain actions on one file could silently affect a number of other files? I know that deleting the file I'm working on is not a problem (assuming I deleted it on purpose). It doesn't affect any of the other hardlinked files and I don't see that the delete action would lead to unexpected side effects. Moving or renaming the file is not a problem. I don't see any unexpected consequences. I don't think copying hardlinked files is a problem, but I'm not as confident about any unexpected consequences in this regard. What I have seen is that making a copy (to the same disk) of a hardlinked file with cp keeps the copy hardlinked (i.e., inode number doesn't change in the copy). Copying to another filesystem obviously breaks the hardlink. (I guess one pitfall is forgetting this fact, given that my PC has 3 hard disks.) Changing permissions does affect all linked files. So far this has proven handy. (I made a large number of the hardlinked files read-only.) None of the operations above seem to produce any major unexpected consequences. However, as was pointed out to me by Daniel Beck in a comment, editing or modifying a file can sometimes be a problem. It depends on the tool and maybe the type of edit. (For example, editing small text files using sed seems to always break the link while using nano doesn't.) This introduces the chance that editing one file could affect all the hardlinked files (i.e., alter the original inode). My proposed solution to this is to make all hardlinked files read-only (and that is already mostly the case). If I can't do that for some files, I will unlink those particular files. Is there any problem with this read-only approach? I'm assuming that if I go to edit a file and find it to be read-only, I'll remember to unlink that filename while making it writable. So one pitfall might be forgetting this rule. In that case, I'll have to rely on my backups. Am I correct in the above statements? And what else do I need to know? BTW, I'm running Kubuntu 12.04. I'm also using btrfs. (I have 2 SSD's and 1 HDD in the PC. I will also be adding an external USB HDD. I'm also connected to a network and I mount some NFS shares. I don't assume any of these last bits are relevant to the question, but I'm adding them just in case.) BTW, since I have more than one drive (with separate file systems), to unlink any file all I have to do is copy it to another drive, then move it back. However, using sed also works (in my testing). Here's my script: sed -i 's/\(.\)/\1/' file1 Surprisingly, this even unlinks zero byte files. In my testing it also appears to work on non-text files without any special options. (But I understand that the --binary option might be needed on Windows, MS-DOS and Cygwin.) However, copying to another disk and moving back may be the best way to unlink. For my use-case, unlink command doesn't really "unlink", rather it "removes".

  Read the article

• Cannot ping Localhost so I can't shutdown Tomcat

  - by gav

  Hi, I installed Tomcat 6 using the tar-ball via wget. Startup of the server is fine but on shutdown I get a timeout exception. root@88:/usr/local/tomcat/logs# /usr/local/tomcat/bin/shutdown.sh Using CATALINA_BASE: /usr/local/tomcat Using CATALINA_HOME: /usr/local/tomcat Using CATALINA_TMPDIR: /usr/local/tomcat/temp Using JRE_HOME: /usr Using CLASSPATH: /usr/local/tomcat/bin/bootstrap.jar 30-Mar-2010 17:33:41 org.apache.catalina.startup.Catalina stopServer SEVERE: Catalina.stop: java.net.ConnectException: Connection timed out at java.net.PlainSocketImpl.socketConnect(Native Method) at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333) at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195) at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182) at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366) ... I read that this might be because I have a firewall blocking incoming connections on the shutdown port (8005). I have a default Ubuntu 9.04 installation running on a VPS with no rules in my iptables. How can I tell if that port is blocked? How can I check that the server is listening for connections on 8005? Bizarrely pinging localhost or the IP of my server fails from the server itself, whereas pinging the IP of my server from another machine succeeds. -------- EDIT -------- (In reply to Davey) Thanks for all the tips and suggestions! netstat -nlp Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 127.0.0.1:8005 0.0.0.0:* LISTEN 9611/java tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN 28505/mysqld tcp 0 0 0.0.0.0:8080 0.0.0.0:* LISTEN 9611/java tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN ... So we can see that tomcat is listening, I just don't seem to be able to reach it. root@88:/usr/local/tomcat# telnet localhost 8005 Trying 127.0.0.1... Trying to telnet to the port Hangs indefinitely. I have no rules in my iptables so I don't think it's a firewall thing. root@88:/usr/local/tomcat# iptables --list Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination This is the contents of /etc/hosts 127.0.0.1 localhost.localdomain localhost # Auto-generated hostname. Please do not remove this comment. 88.198.31.14 88.198.31.14 88 88 But I still can't ping localhost... do I need to check a loopback device is enabled properly or something? (I'm unsure how to do that if you do say yes :)). root@88:/usr/local/tomcat# ping localhost PING localhost (127.0.0.1) 56(84) bytes of data. --- localhost ping statistics --- 7 packets transmitted, 0 received, 100% packet loss, time 5999ms Trying to find out what the loop back is configured as; root@88:~# ifconfig lo lo Link encap:Local Loopback LOOPBACK MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) SOLUTION THANKS TO DAVEY I needed to bring up the interface (Not sure why it wasn't running). ifconfig lo up did the trick. root@88:~# ifconfig lo up root@88:~# ifconfig lo lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) root@88:~# ping localhost PING localhost.localdomain (127.0.0.1) 56(84) bytes of data. 64 bytes from localhost.localdomain (127.0.0.1): icmp_seq=1 ttl=64 time=0.025 ms Thanks again, Gav

  Read the article

• Integrating HP Systems Insight Manager into an existing environment

  - by ewwhite

  I'm working with an environment that spans multiple data centers/sites and consists primarily of HP ProLiant servers (G5-G7) running Linux. The mix is 30% RHEL/CentOS, the rest are Gentoo :(. I also have a few dozen virtual machines running back-office and Windows servers on VMWare ESX hosts. I run OpenNMS to pull SNMP data from the various server nodes and networking devices. While OpenNMS works wonderfully for up/down, thresholds and notifications, it's native handling of traps is a little rough and the graphs are not particularly pretty. I use Orca/RRD graphs for performance trending and nice graphs. I'm tasked with inventorying the environment and wanted to come up with a clean way to organize server information. Since my environment is mostly HP, I've been playing with HP Systems Insight Manager as a way to extract server data and to deploy HP health/monitoring packages and firmware. The Gentoo systems eventually have to be converted to CentOS, so getting a quick assessment of what hardware is where would be great. Although I've read through a few hundred pages of HP manuals, I'm having a difficult time understanding how to get HP SIM to do what I want, though. My main problems are: I have about 40 subnets to deal with; 98% connected with private lines to facilities across the globe. I don't want to initiate an HP SIM discovery only to pull back every piece of intermediate networking hardware and equipment from all of the locations. I'd like this to focus on the servers. I have OpenNMS configured to accept traps. I don't want HP SIM to duplicate that effort. It seems like the built-in software deployment tool wants to overwrite the trapsink parameters for the systems it encounters during discovery. I have about 10 administrative username/password combinations in use across this infrastructure. Is there a more efficient way to get HP SIM to do the discovery or break discovery into manageable chunks? In terms of general workflow, do people typically install the HP Management Agents during the initial OS deployment (e.g. kickstart post script) or afterwards from HP SIM? Is HP SIM too thick/fat to be an inventory tool? I can't tell if it's meant to be used standalone or alongside other monitoring products. Since the majority of the systems I'm trying to track are those running Gentoo (in order to plan the move to CentOS), is there any way for HP SIM to extract system model information from them ( like dmidecode)? I have systems here where I may have an SSH key established, but not direct user or login access. Is there a way for me to import an SSH private/public key pair into HP SIM to reach out to the servers that can't accept standard credentials? There are a handful of sites where I have inconsistent access or have a double-NAT situation. I may be able to poke a server, but it may not be able to find its way back to the management system. Is there a workaround for this? The certificate configuration for HP SIM seems complicated. What is the preferred setup for trust between systems? I'd also appreciate any notes or recommendations to using this product. Or if there's a better way to do this, I'd like to know.

  Read the article

• creating a heirarchy of terminals or workspaces

  - by intuited

  <rant This question occurred to me ('occurred' meaning 'whispered seductively in my ear for the 100th time') while using GNU-screen, so I'll make that my example. However this is a much more general question about user interfaces and what I perceive as a flawmissing feature in every implementation I've yet seen. I'm wondering if there is some way to create a heirarchy/tree of terminals in a screen session. EG I'd like to have something like 1 bash 1.1 bash 1.2 bash 2 bash 3 bash 3.1 bash 3.1.1 bash 3.1.2 bash It would be good if the terminals could be labelled instead of having to be navigated to via some arrangement that I suspect doesn't exist. So then you could jump to one using eg ^A:goto happydays or ^A:goto dykstra.angry. So to generalize that: Firefox, Chrome, Internet Explorer, gnome-terminal, roxterm, konsole, yakuake, OpenOffice, Microsoft Office, Mr. Snuffaluppagus's Funtime Carousel™, and Your Mom's Jam Browser™ all offer the ability to create a flat set of tabs containing documents of an identical nature: web pages, terminals, documents, fun rideable animals, and jams. GNU-screen implements the same functionality without using tabs. Linux and OS/X window managers provide the ability to organize windows into an array of workspaces, which amounts to again, the same deal. Over the past few years, this has become a more or less ubiquitous concept which has been righteously welcomed into the far reaches of the computer interface funfest. Heavy users of these systems quickly encounter a problem with it: the set of entities is flat. In the case of workspaces, an option may be available to create a 2d array. However none of these applications furnish their users with the ability to create heirarchies, similar to filesystem directory structures, containing instances of their particular contained type. I for one am consistently bothered by this, and am wondering if the community can offer some wisdom as to why this has not happened in any of the foremost collections of computational functionality our culture has yet produced. Or if perhaps it has and I'm just an ignorant savage. I'd like to be able to not only group things into a tree structure, but also to create references (aka symbolic links, aka pointers) from one part of the structure to another, as well as apply properties (eg default directory, colorscheme, ...) recursively downward from a given node. I see no reason why we shouldn't be able to save these structures as known sessions, and apply tags to particular instances. So then you can sort through them by tag, find them by name, or just use the arrow keys (with an appropriate modifier) to move left or right and in or out of a given level. Another key combo would serve to create a branch in the place of the current terminal/webpage/lifelike statue/spreadsheet/spreadsheet sheet/presentation/jam and move that entity into the new branch, then create a fresh one as a sibling to it: a second leaf node within the same branch node. They would get along well. I find it a bit astonishing that this hasn't happened yet, and the only reason I can venture as a guess is that the creators of these fine systems do not consider such functionality to be useful to a significant portion of their userbase. I posit that the probability that that such an assumption would be correct is pretty low. On the other hand, given the relative ease with which such structures can be implemented using modern libraries/languages, it doesn't seem likely that difficulty of implementation would be a major roadblock. If it could be done in 1972 or whenever within the constraints of a filesystem driver, it should be relatively painless to implement in 2010 in a fullblown application. Given that all of these systems are capable of maintaining a set of equivalent entities, it seems unlikely that a major infrastructure overhaul would be necessary in order to enable a navigable heirarchy of them. </rant Mostly I'm just looking to start up a discussion and/or brainstorming on this topic. Any ideas, examples, criticism, or analysis are quite welcome. * Mr. Snuffaluppagus's Funtime Carousel is a registered trademark of Children's Television Workshop Inc. * Your Mom's Jam Browser is a registered trademark of Your Mom Inc.

  Read the article

• Postfix on Snow Leopard unable to send MIME emails, including header contents in message body

  - by devvy

  I configured postfix on snow leopard by adding the following line to /etc/hostconfig: MAILSERVER=-YES- I then configured postfix to relay through my ISP's SMTP server. I added the following two lines in their respective places within /etc/postfix/main.cf: myhostname = 1and1.com relayhost = shawmail.vc.shawcable.net I then have a simple PHP mail function wrapper as follows: send_email("[email protected]", "[email protected]", "Test Email", "<p>This is a simple HTML email</p>"); echo "Done"; function send_email($from,$to,$subject,$message){ $header="From: <".$from."> "; $header.= 'MIME-Version: 1.0' . " "; $header.= 'Content-type: text/html; charset=iso-8859-1' . " "; $send_mail=mail($to,$subject,$message,$header); if(!$send_mail){ echo "ERROR"; } } With this, I am receiving an e-mail that appears to be improperly formatted. The message header is showing up in the body of the e-mail. The raw message content is as follows: Return-Path: <[email protected]> Delivery-Date: Tue, 27 Apr 2010 18:12:48 -0400 Received: from idcmail-mo2no.shaw.ca (idcmail-mo2no.shaw.ca [64.59.134.9]) by mx.perfora.net (node=mxus2) with ESMTP (Nemesis) id 0M4XlU-1NCtC81GVY-00z5UN for [email protected]; Tue, 27 Apr 2010 18:12:48 -0400 Message-Id: <[email protected]> Received: from pd6ml3no-ssvc.prod.shaw.ca ([10.0.153.149]) by pd6mo1no-svcs.prod.shaw.ca with ESMTP; 27 Apr 2010 16:12:47 -0600 X-Cloudmark-SP-Filtered: true X-Cloudmark-SP-Result: v=1.0 c=1 a=VphdPIyG4kEA:10 a=hATtCjKilyj9ZF5m5A62ag==:17 a=mC_jT1gcAAAA:8 a=QLyc3QejAAAA:8 a=DGW4GvdtALggLTu6w9AA:9 a=KbDtEDGyCi7QHcNhDYYwsF92SU8A:4 a=uch7kV7NfGgA:10 a=5ZEL1eDBWGAA:10 Received: from unknown (HELO 1and1.com) ([24.84.196.104]) by pd6ml3no-dmz.prod.shaw.ca with ESMTP; 27 Apr 2010 16:12:48 -0600 Received: by 1and1.com (Postfix, from userid 70) id BB08D14ECFC; Tue, 27 Apr 2010 15:12:47 -0700 (PDT) To: [email protected] Subject: Test Email X-PHP-Originating-Script: 501:test.php Date: Tue, 27 Apr 2010 18:12:48 -0400 X-UI-Junk: AutoMaybeJunk +30 (SPA); V01:LYI2BGRt:7TwGx5jxe8cylj5nOTae9JQXYqoWvG2w4ZSfwYCXmHCH/5vVNCE fRD7wNNM86txwLDTO522ZNxyNHhvJUK9d2buMQuAUCMoea2jJHaDdtRgkGxNSkO2 v6svm0LsZikLMqRErHtBCYEWIgxp2bl0W3oA3nIbtfp3li0kta27g/ZjoXcgz5Sw B8lEqWBqKWMSta1mCM+XD/RbWVsjr+LqTKg== Envelope-To: [email protected] From: <[email protected]> MIME-Version: 1.0 Content-type: text/html; charset=iso-8859-1 Message-Id: <[email protected]> Date: Tue, 27 Apr 2010 15:12:47 -0700 (PDT) <p>This is a simple HTML email</p> And here are the contents of my /var/log/mail.log file after sending the email: Apr 27 15:29:01 User-iMac postfix/qmgr[705]: 74B1514EDDF: removed Apr 27 15:29:30 User-iMac postfix/pickup[704]: 25FBC14EDF0: uid=70 from=<_www> Apr 27 15:29:30 User-iMac postfix/master[758]: fatal: open lock file pid/master.pid: unable to set exclusive lock: Resource temporarily unavailable Apr 27 15:29:30 User-iMac postfix/cleanup[745]: 25FBC14EDF0: message-id=<[email protected]> Apr 27 15:29:30 User-iMac postfix/qmgr[705]: 25FBC14EDF0: from=<[email protected]>, size=423, nrcpt=1 (queue active) Apr 27 15:29:30 User-iMac postfix/smtp[747]: 25FBC14EDF0: to=<[email protected]>, relay=shawmail.vc.shawcable.net[64.59.128.135]:25, delay=0.21, delays=0.01/0/0.1/0.1, dsn=2.0.0, status=sent (250 ok: Message 25784419 accepted) Apr 27 15:29:30 User-iMac postfix/qmgr[705]: 25FBC14EDF0: removed Two other people in the office have followed the exact same process and are running the exact same script, version of snow leopard, php, etc. and everything is working fine for them. I've even copied their config files to my machine, restarted postfix, restarted apache, all to no avail. Does anyone know what steps I could take to resolve the issue? This is boggling my mind... Thanks

  Read the article

• Configuring Wireless on Cisco 851W

  - by Aequitarum Custos

  Either a powersurge or something caused our router's configuration to get wiped, and our last backup was before the wireless network was setup. We have not been able to reconfigure the wireless since then, so was curious if anyone here would be able to determine what configuration is needed. We are using a Cisco 851W running 12.4(15)T9 We would like to use WPA encryption, and have it on the same network as the rest of the office network. Config file is below: User Access Verification Building configuration... Current configuration : 3857 bytes ! version 12.4 no service pad service timestamps debug datetime msec service timestamps log datetime msec service password-encryption no service dhcp ! hostname BOB ! boot-start-marker boot-end-marker ! enable secret 5 ********************* ! no aaa new-model ! ! dot11 syslog no ip source-route ! ! ip cef no ip bootp server ip domain name BOB.com ip name-server 61.11.1.1 ip name-server 61.11.1.2 ! ! ! username BOBB privilege 15 password 7 ************************* ! ! archive log config hidekeys ! ! ip tcp synwait-time 10 ! ! ! interface FastEthernet0 no cdp enable ! interface FastEthernet1 no cdp enable ! interface FastEthernet2 no cdp enable ! interface FastEthernet3 no cdp enable ! interface FastEthernet4 description WAN Connection$ETH-WAN$ ip address 61.11.1.14 255.255.254.0 ip nat outside ip virtual-reassembly duplex auto speed auto no cdp enable ! interface Dot11Radio0 no ip address shutdown ! encryption mode ciphers tkip speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0 station-role root no cdp enable ! interface Dot11Radio0.1 encapsulation dot1Q 1 native no cdp enable bridge-group 1 bridge-group 1 subscriber-loop-control bridge-group 1 spanning-disabled bridge-group 1 block-unknown-source no bridge-group 1 source-learning no bridge-group 1 unicast-flooding ! interface Dot11Radio0.20 ip access-group Guest-ACL in no cdp enable ! interface Vlan1 description Internal Network ip address 192.168.2.60 255.255.255.0 ip nat inside ip nat enable ip virtual-reassembly ! ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 61.11.2.14 ! ip http server no ip http secure-server ip nat inside source list 1 interface FastEthernet4 overload ! ip access-list extended Guest-ACL deny ip any 192.0.0.0 0.0.0.255 permit ip any any ! access-list 1 permit 192.0.0.0 0.0.0.255 access-list 100 remark SDM_ACL Category=2 access-list 100 permit ip 192.0.0.0 0.0.0.255 any no cdp run ! control-plane ! !

  Read the article

• Strange Upload Problem on Hyper-V

  - by Ring0

  Hi, This one is driving me totally nuts. I have being trying to upload a file to www.virustotal.com (its a harmless exe I have since found out - DiskWipe.exe from diskwipe.org). Using IE8. From Win 7 and Win 2008 R2 Datacenter (which I select to boot from vhd's) onto my main machine hardware, and also on another Win 7 PC elsewhere on my network, when I upload the file to virustotal.com it works perfectly. So, using my native NIC's everything is fine. Using another machine also perfect. Right. OK, from my boot menu the default is my main development machine - the one I'm typing on now. This runs on the metal and has Hyper-V role and I have some guests. All guests are not running. Amazingly, from my console (root partition to be exact) or any guest OS 2003 /XP / 2008 R2 etc. My upload to virustotal.com slows at 32% then HANGS at 38.something% & never finishes!! Here is the kicker. I have another box (my main server) running Hyper-V on the metal and three live guests. Identical H/W to my main dev machine in another room. (Except OS is Datacenter - Mine is Enterprise). If I try and upload from its bare metal console or any guest this file to virustotal.com using IE8 it stops exactly in the same place!! As for "steps I have tried etc." are kind-of blown out of the water as my server box is doing the precise same thing as the machine in my room here. OK, comonalities: Mobo: Gigabyte GA-X58-UD5, 12GB Kingston RAM, Corei7 920 4 cores hyperthreading = 8 & Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC's. All 3 machines have this same motherboard - revision F11 Bios, all have 12GB RAM, all have the Realtek Nic's. All x64 by the way as I mentioned before I have a Win 7 box also with the UD5 m/Board, 12 GB RAM - bit of an overkill. :-) All these machines when NOT running Hyper-V can upload this file. Perhaps you may like to try it on a Hyepr-v (2008 R2) yourselves with IE8 and the desktop experience is on. See if it works or fails for you. Root OS or any guest. So, looking like its the NIC + Hyper-V = Cannot upload this file (any file I must add.) Realtek Nic is Ver 7.002.1125.2008. Using IE8 I see in the nic settings there are the usual parameters for Jumbo frames / Checksum offloading etc. several others. Should I fiddle with these? I ran Netmon 3.3 in a guest and the TCP session halted as the upload failed. I suppose I could study that further. I dont have Netmon on the root partition machine (yet)! All OS's fully patched - including todays defender files. My box running Office 2007 - but identical server in another room is not. Also, if I fire up a VPN to a distant client and do the upload it works! Of course its a different network path. Suggestions welcome please. If I left out anything important - please yell at me. Many Thanks,

  Read the article

• How to set up a centralized backup server with lots of offsite workstations, intermittent internet connectivity, and stubborn users?

  - by Zac B

  This might be an impossible question. Context: We have a bunch of computers across around 1000 users. We have a centralized office where 900 of the users work, most of the time. Most of the computers are laptops. They are very frequently coming on and off the network for hours at a time. Users often take their computers home and do lots of work from home. In addition, there are a handful of users who work elsewhere in the country, who are offline (no internet connection whatsoever) for more than half of the time they use their machines. All of the machines are Windows 7/XP. Problem: People are always losing data. One day someone accidentally deletes a bunch of files. The next day someone else installs a bad driver or tries to mess with something in system32 and needs a personal data backup/reinstall of Windows. Because of how many of our business operations are done without an internet connection, and how frequently computers come on- and offline, it's unfeasible to make users use network storage for all of their data. We tried giving them Dropboxes, and they stored their files elsewhere. We bought and deployed Altiris, and they uninstalled it and blamed us when they couldn't get files back that they accidentally deleted while they were offline and hadn't taken a backup in months. We tried teaching them backup best-practices, and using scheduled sync tools to upload things to the network drives, and they turned them off because they "looked like viruses". It doesn't help that many of these users are pretty high up in the business and are not amicable to any sort of "you need to do something regularly because we say so" solution. Question: Other than finding another job where IT is treated differently and users are willing to follow best practices, how would people recommend I implement a file backup solution that supports the following: Backs up to a centralized server over LAN or WAN whenever a network link becomes available, or on a schedule. Supports interrupted/resumed backups (and hopefully file-delta only backups), since connections to the network (WAN or LAN) are often slow and only open for half an hour or so. Supports relatively rapid, "I accidentally deleted the TPS reports! Oh no!" single-file recovery, ideally administered from the central backup server rather than the client PC. Supports local-to-local file delta backup on a schedule, so that users without a network connection for a few days can still retrieve accidental deletions or whatnot. Ideally, the local stored backups would be pushed up to the server whenever network link is available. Isn't configurable on the clients without certain credentials. Because the CFOs (who won't give up their admin rights on the domain) will disable it if they can. Backs up the entire hard drive. There are people who are self-righteous about storing things in C:\, or in the recycle bin, or in the C:\Windows dir (yes, I know). I'm fine integrating multiple products/solutions, or scripting different programs together myself (I'm a somewhat competent programmer), but I've been drawing a blank on where to start. Dropbox is folder-specific, Altiris doesn't cope with LAN outages or interrupted/resumed backups, Volume Shadow Copy is awesome for a local-to-local solution, but I don't know how to push days of stored shadow copies up to a server in a 2 hour window of network access. The company is fine with spending decent money on this, thousands (USD) on a server, and hundreds on clients, if necessary. I want to emphasize that this isn't a shopping list request. While I wish there was a program out there that did what I want, I've looked pretty hard, and not found anything that fits the bill. Instead, I'm hoping for ideas on where to start hacking things together from scratch/from different technologies to make something stable that works. Cheers!

  Read the article

• Local DNS server (bind) and the router DHCP

  - by Luca

  I just set up an internal http server for internal use (I set up Redmine), in a small network (30 or so PCs). I set up the http server on a virtual box ubuntu, that runs also the DNS server (bind). In the DNS lookup I added the Redmine server name (redmine.engserver <- 192.168.1.14) and as forwarders the outside ISP DNS IP adresses. I am using a small wi-fi router (ASUS RT-N66U) as DHCP (and as gateway). In the DHCP config page I set up as DNS the ubuntu server IP (it is fixed 192.168.1.14). Now when I connect a new PC to the network, the DHCP router issues its new IP and as DNS servers it issues: primary: 192.168.1.14 (ubuntu machine) and seconary 192.168.1.1 (the router itself). ipconfig /all Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DHCPv6 IAID . . . . . . . . . . . : 248539109 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-15-AA-3F-D0-67-E5-49-A7-EF DNS Servers . . . . . . . . . . . : 192.168.1.14 192.168.1.1 NetBIOS over Tcpip. . . . . . . . : Enabled Before changing the DHCP setting on the router, I would always get only one DNS server: 192.168.1.1 (which uses probably DNS forwarding to external public DNS services). The problem is this: If in my browser I type www.google.com, it works all the time. If in the browser I type http://redmine.engserver/ it works most of the time, but sometimes it ends up with a yahoo page search or something else. In the DNS cache it shows as (Server not found). ipconfig /displaydns I looked with wireshark and it seems like sometimes the client PC interrogates the secondary DNS (192.168.1.1) instead of the first 192.168.1.14. Obviously this one is a public domain and it does not have the redmine.engserver entry. What is wrong in this configuration? Is it even legitimate to have 2 DNS (one internal and one forwarded by the router) which are inconsistent? Is there another way to have a local name service in a small office network? Why is the router DHCP issuing itself as DNS?

  Read the article

• Backup a hosted Sharepoint

  - by David Mackintosh

  One of my customers has outsourced their Sharepoint and Exchange services to a hosted services provider. I believe it is a Sharepoint 2007 service. It is a shared hosting solution, so we do not have any kind of access to the server itself; we only have user-level and sharepoint-administrator-level access to the Sharepoint application. They have come to the point where they would like to have a copy of everything that is on the Sharepoint server. I have downloaded the Office Sharepoint Designer 2007, and it features three (!) ways to backup a Sharepoint server, none (!) of which work for me: File-Export-Personal Web Package: When selecting everything, it calculates a negative size. Barfs with No "content-type" in CGI environment error. File-Export-Sharepoint Template: barfs with a A World Wide Web browser, such as Windows Internet Explorer, is required to use this feature error. Site-Administration-Backup Web Site: wants to create the backup .cmp file on the sharepoint server itself. I don't have access to any servers on the same network so I can't redirect it to any form of the suggested \\server\place. Barfs with a The Web application at $URL could not be found. [...] error. Possibly moot because Google tells me that bad things happen using OSD to back up sites larger than 24MB (which this site is most definitely). So I called the helpdesk of the outsource provider, and got told that they recommend using OSD, but no they don't actually provide any application support for OSD (not that I blame them for that), but they could do a stsadm.exe backup and provide us with that, and OSD should be able to read the resulting cmp file. Then for authorization reasons they had my customer call them directly (since I can't authorize such an operation), and they told him that he didn't want a stsadm.exe backup, he wanted to get into an 'explorer view' and deal with things that way (they were vague). Google hasn't been much help in figuring out what an 'explorer view' is, let alone how I bring one up. The end goal of this operation is to have a backup of the site as it exists (hopefully today, but shortly anyways) in such a format that we don't need another sharepoint server to restore it to. Ie we'd like to be able to pick individual content directly out of this backup. We are not excessively concerned with things like formatting. We just want the documents. This is a fairly complex site with multiple subsites and multiple folders per subsite, so sitting there and manually downloading each file isn't really going to happen if there is a better easier way. So, my questions: Is the stsadm.exe backup what I want? If not, what do I want? If I manage to convince them that I do want the stsadm.exe backup, can I pick files out of the resulting backup file with OSD? If OSD isn't going to let me extract individual files, is there a tool I can use that can?

  Read the article

• Is it possible to write C# code as below and send email using network in different country?

  - by kedar karthik

  Is it possible to write C# code as below and send email using mnetwork in different country? MSExchangeWebServiceURL = mail.something.com/ews/exchange.asmx its a web service URL ... sorry to correct my self //....this works great when i run the same code from home network, my friends home network ... anywhere around ... but when i run it from my clients location in columbia ... it fails I have a valid user name and password on that exchange server. Is there any configuration that I can set to achieve this? BTW this code below works when I run it within office network and any network within any home network ... i have tried atleast 5 friends network in Plano, Texas. I want this code to work when run from any network in another country. My client in columbia can connect to web service using a browser .. use the same user name and password ..... but when i run the code above ... it is not able to connect to our web service .... String cMSExchangeWebServiceURL = (String)System.Configuration.ConfigurationSettings.AppSettings["MSExchangeWebServiceURL"]; String cEmail = (String)System.Configuration.ConfigurationSettings.AppSettings["Cemail"]; String cPassword = (String)System.Configuration.ConfigurationSettings.AppSettings["Cpassword"]; String cTo = (String)System.Configuration.ConfigurationSettings.AppSettings["CTo"]; ExchangeServiceBinding esb = new ExchangeServiceBinding(); esb.Timeout = 1800000; esb.AllowAutoRedirect = true; esb.UseDefaultCredentials = false; esb.Credentials = new NetworkCredential(cEmail, cPassword); esb.Url = cMSExchangeWebServiceURL; ServicePointManager.ServerCertificateValidationCallback += delegate(object sender1, X509Certificate certificate, X509Chain chain, SslPolicyErrors sslPolicyErrors) { return true; }; // Create a CreateItem request object CreateItemType request = new CreateItemType(); // Setup the request: // Indicate that we only want to send the message. No copy will be saved. request.MessageDisposition = MessageDispositionType.SendOnly; request.MessageDispositionSpecified = true; // Create a message object and set its properties MessageType message = new MessageType(); message.Subject = subject; message.Body = new TestOutgoingEmailServer.com.cogniti.mail1.BodyType(); message.Body.BodyType1 = BodyTypeType.HTML; message.Body.Value = body; message.ToRecipients = new EmailAddressType[3]; message.ToRecipients[0] = new EmailAddressType(); //message.ToRecipients[1] = new EmailAddressType(); //message.ToRecipients[2] = new EmailAddressType(); message.ToRecipients[0].EmailAddress = "[email protected]"; message.ToRecipients[0].RoutingType = "SMTP"; //message.CcRecipients = new EmailAddressType[1]; //message.CcRecipients[0] = new EmailAddressType(); //message.CcRecipients[0].EmailAddress = toEmailAddress.ElementAt(1).ToString(); //message.CcRecipients[0].RoutingType = "SMTP"; //There are some more properties in MessageType object //you can set all according to your requirement // Construct the array of items to send request.Items = new NonEmptyArrayOfAllItemsType(); request.Items.Items = new ItemType[1]; request.Items.Items[0] = message; // Call the CreateItem EWS method. CreateItemResponseType response = esb.CreateItem(request);

  Read the article

• md/raid:md2: cannot start dirty degraded array, kernel panic

  - by nl-x

  After having made use of a remote power switch, my server did not come back online. When I went to the datacenter and reboot the computer on the spot I see the server booting (I see the centos progress bar with running almost all the way to the end) and eventually giving the following messages: md/raid:md2: cannot start dirty degraded array. md/raid:md2: failed to run raid set. md: pers->run() failed ... md/raid:md2: cannot start dirty degraded array. md/raid:md2: failed to run raid set. md: pers->run() failed ... Kernel panic - not syncing: Attempted to kill init! Pid: 1, comm: init not tainted 2.6.32-279.1.1.el6.i686 #1 Call Trace: [<c083bfbc>] ? panic+0x68/0x11c [<c045a501>] ? do_exit+0x741/0x750 [<c045a54c>] ? do_group_exit+0x3c/0xa0 [<c045a5c1>] ? sys_exit_group+0x11/0x20 [<c083eba4>] ? syscall_call+0x7/0xb [<c083007b>] ? cmos_wake_setup+0x62/0x112 The server runs CentOS and has software raid, and I don't have backups of the raid settings. The only backup I have is of /home and the database dumps. (Glad to at least have those though.) Since the server is an old Dell PowerEdge 1750 with no CD-ROM drive, I have no way of booting the machine from a boot disk. I also remember in the past that the server also wouldn't boot from a bootable USB disk. So the only way I know how to boot the server is to go to the datacenter, pick up the server and take it to the office. Screw open the server. Attach a cdrom drive to an IDE slot on the motherboard. And then boot it. I am hoping you guys could help me avoid this. I have looked a bit through the boot options and I found the following boot options. When CentOS is about to boot and interrupt the boot-countdown: CentOS (2.6.32-279.1.1.el63.i686) CentOS Linux (2.6.32-71.29.1.el6.i686) centos (2.6.32-71.el6.i686) I think the first configuration is the default one, because choosing that gets me to the above mentioned kernel panic. The other ones end with something like "Sleeping forever". I can press 'e' to edit boot commands, press 'a' to modify kernel arguments and press 'c' for grub command line. The command line gives a grub prompt. But I have no idea how to get the system to boot without (trying to) access the dirty partitions. What I want to do is off course: - boot the machine - check hard drive for errors - mark the drive as clean

  Read the article

• Setting up VPN client: L2TP with IPsec

  - by zachar

  I've got to connect to vpn server. It works on Windows, but in Ubuntu 10.04 not. Number of options is confusing for me. There is the input that I have: IP Address of VPN Pre-shared key to authenticate Information that MS-CHAPv2 is used Login and Password to VPN I was trying to achive that with network manager and with L2TP IPsec VPN Manager 1.0.9 but at failed. There is some logged information from L2TP IPsec VPN Manager 1.0.9: Nov 09 15:21:46.854 ipsec_setup: Stopping Openswan IPsec... Nov 09 15:21:48.088 Stopping xl2tpd: xl2tpd. Nov 09 15:21:48.132 ipsec_setup: Starting Openswan IPsec U2.6.23/K2.6.32-49-generic... Nov 09 15:21:48.308 ipsec__plutorun: Starting Pluto subsystem... Nov 09 15:21:48.318 ipsec__plutorun: adjusting ipsec.d to /etc/ipsec.d Nov 09 15:21:48.338 ipsec__plutorun: 002 added connection description "my_vpn_name" Nov 09 15:21:48.348 ipsec__plutorun: 003 NAT-Traversal: Trying new style NAT-T Nov 09 15:21:48.348 ipsec__plutorun: 003 NAT-Traversal: ESPINUDP(1) setup failed for new style NAT-T family IPv4 (errno=19) Nov 09 15:21:48.349 ipsec__plutorun: 003 NAT-Traversal: Trying old style NAT-T Nov 09 15:21:48.994 104 "my_vpn_name" #1: STATE_MAIN_I1: initiate Nov 09 15:21:48.994 003 "my_vpn_name" #1: received Vendor ID payload [RFC 3947] method set to=109 Nov 09 15:21:48.994 003 "my_vpn_name" #1: received Vendor ID payload [Dead Peer Detection] Nov 09 15:21:48.994 106 "my_vpn_name" #1: STATE_MAIN_I2: sent MI2, expecting MR2 Nov 09 15:21:48.994 003 "my_vpn_name" #1: NAT-Traversal: Result using RFC 3947 (NAT-Traversal): i am NATed Nov 09 15:21:48.994 108 "my_vpn_name" #1: STATE_MAIN_I3: sent MI3, expecting MR3 Nov 09 15:21:48.994 004 "my_vpn_name" #1: STATE_MAIN_I4: ISAKMP SA established {auth=OAKLEY_PRESHARED_KEY cipher=oakley_3des_cbc_192 prf=oakley_sha group=modp1024} Nov 09 15:21:48.995 117 "my_vpn_name" #2: STATE_QUICK_I1: initiate Nov 09 15:21:48.995 004 "my_vpn_name" #2: STATE_QUICK_I2: sent QI2, IPsec SA established transport mode {ESP=>0x0c96795d <0x483e1a42 xfrm=AES_128-HMAC_SHA1 NATOA=none NATD=none DPD=none} Nov 09 15:21:49.996 [ERROR 210] Failed to open l2tp control file 'c my_vpn_name' and from syslog: Nov 9 15:21:46 o99 L2tpIPsecVpnControlDaemon: Opening client connection Nov 9 15:21:46 o99 L2tpIPsecVpnControlDaemon: Executing command ipsec setup stop Nov 9 15:21:46 o99 ipsec_setup: Stopping Openswan IPsec... Nov 9 15:21:48 o99 kernel: [ 4350.245171] NET: Unregistered protocol family 15 Nov 9 15:21:48 o99 ipsec_setup: ...Openswan IPsec stopped Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Command ipsec setup stop finished with exit code 0 Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Executing command invoke-rc.d xl2tpd stop Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Command invoke-rc.d xl2tpd stop finished with exit code 0 Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Opening client connection Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Closing client connection Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Executing command ipsec setup start Nov 9 15:21:48 o99 kernel: [ 4350.312483] NET: Registered protocol family 15 Nov 9 15:21:48 o99 ipsec_setup: Starting Openswan IPsec U2.6.23/K2.6.32-49-generic... Nov 9 15:21:48 o99 ipsec_setup: Using NETKEY(XFRM) stack Nov 9 15:21:48 o99 kernel: [ 4350.410774] Initializing XFRM netlink socket Nov 9 15:21:48 o99 kernel: [ 4350.413601] padlock: VIA PadLock not detected. Nov 9 15:21:48 o99 kernel: [ 4350.427311] padlock: VIA PadLock Hash Engine not detected. Nov 9 15:21:48 o99 kernel: [ 4350.441533] padlock: VIA PadLock not detected. Nov 9 15:21:48 o99 ipsec_setup: ...Openswan IPsec started Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Command ipsec setup start finished with exit code 0 Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Executing command invoke-rc.d xl2tpd start Nov 9 15:21:48 o99 ipsec__plutorun: adjusting ipsec.d to /etc/ipsec.d Nov 9 15:21:48 o99 pluto: adjusting ipsec.d to /etc/ipsec.d Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Command invoke-rc.d xl2tpd start finished with exit code 0 Nov 9 15:21:48 o99 ipsec__plutorun: 002 added connection description "my_vpn_name" Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Executing command ipsec auto --ready Nov 9 15:21:48 o99 ipsec__plutorun: 003 NAT-Traversal: Trying new style NAT-T Nov 9 15:21:48 o99 ipsec__plutorun: 003 NAT-Traversal: ESPINUDP(1) setup failed for new style NAT-T family IPv4 (errno=19) Nov 9 15:21:48 o99 ipsec__plutorun: 003 NAT-Traversal: Trying old style NAT-T Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Command ipsec auto --ready finished with exit code 0 Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Executing command ipsec auto --up my_vpn_name Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Command ipsec auto --up my_vpn_name finished with exit code 0 Nov 9 15:21:49 o99 L2tpIPsecVpnControlDaemon: Closing client connection Can anyone tell me something more about that? Where is the mistake?

  Read the article

• I need to understand why my server turned off

  - by Dema

  Our organization was robbed and definitely it was inside job. I was set up. I work as a manager and as system administrator in this organization and everything goes against me. The only clue I have is that someone accidentally or intentionally turned of a server that is in the office indicating that some one was inside at the time that no one should be. This is the only evidence I have that can justify me.  I looked the log files and they show that the Power button was pressed. Can you help me to find out that that was not a bug or systems overheat? I will post the log files and if you will ask more I will gladly provide the information. Messages: Dec 24 21:43:14 jamx shutdown[27883]: shutting down for system halt Dec 24 21:43:15 jamx init: Switching to runlevel: 0 Dec 24 21:43:15 jamx smartd[3047]: smartd received signal 15: Terminated Dec 24 21:43:15 jamx smartd[3047]: smartd is exiting (exit status 0) Dec 24 21:43:15 jamx avahi-daemon[3015]: Got SIGTERM, quitting. Dec 24 21:43:15 jamx avahi-daemon[3015]: Leaving mDNS multicast group on interface eth0.IPv6 with address fe80::221:85ff:fe11:8221. Dec 24 21:43:15 jamx avahi-daemon[3015]: Leaving mDNS multicast group on interface eth0.IPv4 with address 82.207.41.239. Dec 24 21:43:15 jamx shutdown[27962]: shutting down for system halt Dec 24 21:43:15 jamx saslauthd[2983]: server_exit     : master exited: 2983 Dec 24 21:43:29 jamx nmbd[2921]: [2010/12/24 21:43:29, 0] nmbd/nmbd.c:terminate(58) Dec 24 21:43:29 jamx nmbd[2921]:   Got SIGTERM: going down... Dec 24 21:43:31 jamx clamd[2526]: Pid file removed. Dec 24 21:43:31 jamx clamd[2526]: --- Stopped at Fri Dec 24 21:43:31 2010 Dec 24 21:43:31 jamx clamd[2526]: Socket file removed. Dec 24 21:43:31 jamx mydns[2645]: jamx.org.ua up 9h44m48s (35088s) 117 questions (0/s) NOERROR=117 SERVFAIL=0 NXDOMAIN=0 NOTIMP=0 REFUSED=0 (100% TCP, 117 queries) Dec 24 21:43:31 jamx mydns[2645]: terminated Dec 24 21:43:34 jamx ntpd[2512]: ntpd exiting on signal 15 Dec 24 21:43:34 jamx hcid[2265]: Got disconnected from the system message bus Dec 24 21:43:35 jamx rpc.statd[2167]: Caught signal 15, un-registering and exiting. Dec 24 21:43:35 jamx portmap[28473]: connect from 127.0.0.1 to unset(status): request from unprivileged port Dec 24 21:43:35 jamx auditd[2021]: The audit daemon is exiting. Dec 24 21:43:35 jamx kernel: audit(1293219815.505:4044): audit_pid=0 old=2021 by auid=4294967295 Dec 24 21:43:35 jamx pcscd: pcscdaemon.c:572:signal_trap() Preparing for suicide Dec 24 21:43:36 jamx pcscd: hotplug_libusb.c:376:HPRescanUsbBus() Hotplug stopped Dec 24 21:43:36 jamx pcscd: readerfactory.c:1379:RFCleanupReaders() entering cleaning function Dec 24 21:43:36 jamx pcscd: pcscdaemon.c:532:at_exit() cleaning /var/run Dec 24 21:43:36 jamx kernel: Kernel logging (proc) stopped. Dec 24 21:43:36 jamx kernel: Kernel log daemon terminating. Dec 24 21:43:37 jamx exiting on signal 15 Acpid: [Fri Dec 24 21:43:14 2010] received event "button/power PWRF 00000080 00000001" [Fri Dec 24 21:43:14 2010] notifying client 2382[68:68] [Fri Dec 24 21:43:14 2010] executing action "/bin/ps awwux | /bin/grep gnome-power-manager | /bin/grep -qv grep || /sbin/shutdown -h now" [Fri Dec 24 21:43:14 2010] BEGIN HANDLER MESSAGES [Fri Dec 24 21:43:15 2010] END HANDLER MESSAGES [Fri Dec 24 21:43:15 2010] action exited with status 0 [Fri Dec 24 21:43:15 2010] completed event "button/power PWRF 00000080 00000001" [Fri Dec 24 21:43:15 2010] received event "button/power PWRF 00000080 00000002" [Fri Dec 24 21:43:15 2010] notifying client 2382[68:68] [Fri Dec 24 21:43:15 2010] executing action "/bin/ps awwux | /bin/grep gnome-power-manager | /bin/grep -qv grep || /sbin/shutdown -h now" [Fri Dec 24 21:43:15 2010] BEGIN HANDLER MESSAGES [Fri Dec 24 21:43:15 2010] END HANDLER MESSAGES [Fri Dec 24 21:43:15 2010] action exited with status 0 [Fri Dec 24 21:43:15 2010] completed event "button/power PWRF 00000080 00000002" [Fri Dec 24 21:43:34 2010] exiting

  Read the article

• ASA 5505 stops local internet when connected to VPN

  - by g18c

  Hi I have a Cisco ASA router running firmware 8.2(5) which hosts an internal LAN on 192.168.30.0/24. I have used the VPN Wizard to setup L2TP access and I can connect in fine from a Windows box and can ping hosts behind the VPN router. However, when connected to the VPN I can no longer ping out to my internet or browse web pages. I would like to be able to access the VPN, and also browse the internet at the same time - I understand this is called split tunneling (have ticked the setting in the wizard but to no effect) and if so how do I do this? Alternatively, if split tunneling is a pain to setup, then making the connected VPN client have internet access from the ASA WAN IP would be OK. Thanks, Chris names ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.30.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address 208.74.158.58 255.255.255.252 ! ftp mode passive access-list inside_nat0_outbound extended permit ip any 10.10.10.0 255.255.255.128 access-list inside_nat0_outbound extended permit ip 192.168.30.0 255.255.255.0 192.168.30.192 255.255.255.192 access-list DefaultRAGroup_splitTunnelAcl standard permit 192.168.30.0 255.255.255.0 access-list DefaultRAGroup_splitTunnelAcl_1 standard permit 192.168.30.0 255.255.255.0 pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool LANVPNPOOL 192.168.30.220-192.168.30.249 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 192.168.30.0 255.255.255.0 route outside 0.0.0.0 0.0.0.0 208.74.158.57 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 192.168.30.0 255.255.255.0 inside snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 TRANS_ESP_3DES_SHA crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn group-policy DefaultRAGroup internal group-policy DefaultRAGroup attributes dns-server value 192.168.30.3 vpn-tunnel-protocol l2tp-ipsec split-tunnel-policy tunnelspecified split-tunnel-network-list value DefaultRAGroup_splitTunnelAcl_1 username user password Cj7W5X7wERleAewO8ENYtg== nt-encrypted privilege 0 tunnel-group DefaultRAGroup general-attributes address-pool LANVPNPOOL default-group-policy DefaultRAGroup tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key ***** tunnel-group DefaultRAGroup ppp-attributes no authentication chap authentication ms-chap-v2 ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options ! service-policy global_policy global prompt hostname context : end

  Read the article

• How to delete files and folders that cannot be deleted?

  - by glenneroo

  I have a backup copy of a previous Windows' Documents and Settings folder which only contains my original user and within 2 more directories: Favorites and Local Settings. When I try to delete Local Settings I get this error: When I try to delete Favorites, I get this error: I ran this in a cmd shell: attrib *.* -r -a -s -h /s ...but it did not help, nor did it return any errors/warnings. I used Unlocker v1.8.5 and LockHunter repeatedly at multiple levels to see if any files are in use, but both always say: No Files Locked. Update #1: I was able to rename the directory, which now gives me this warning before (trying to) delete: If I press Yes (or Yes to All) then I get this error: Update #2: I let chkdsk /f run which required a reboot since it's on my primary system partition. During Stage 2 scanning, I received about 40 of these: Deleting an index entry from index $0 of file 25. ...followed by: Deleting index entry cookies in index $I30 of file 37576. ...but I still get the first error dialog above when trying to delete. I ran chkdsk again, this time: chkdsk /f /r. Produced no messages. Same result when deleting. Update #3: Digging deeper, the 99 is the name of one of many directories located deep in here: C:\Documents and Settings.OLD\User\Local Settings\Application Data\Microsoft\Messenger\[email protected]\SharingMetadata\[email protected]\DFSR\Staging\CS{D4E4AE55-B5E2-F03B-5189-6C4DA6E41788}\ Inside each of those directories were files with names such as: 2300-{C93D01AC-0739-4FD9-88C7-13D2F21A208E}-v2300-{C93D01AC-0739-4FD9-88C7-13D2F21A208E}-v2300-Downloaded.frx I noticed that, unlike all the directories, I couldn't rename any of these files. I also noticed that the file + dir names were extremely long: Original directory = 194 characters Filenames = 100+ characters Together the length exceeds the 255-char limit which is bad and would explain the error message I posted in Update #1. Partial Solution: Rename all directories until the total path length is less than 100. Afterwards I was able to rename the .frx files, not to mention delete everything inside the Local Settings directory. This is only a partial solution because these (empty) directories are still not deleteable, C:\1\2\Favorites\Wien\What To Do.. C:\1\2\Favorites\Photography\FIRE Same error as above: Here is what Explorer properties shows for both folders: Update #4 (another partial solution): Using harrymc's answer combined with thoroughly reading through this amazing MS-KB article which contains nearly everyone's idea and then some, inconspicuously titled: You cannot delete a file or a folder on an NTFS file system volume. I was able to delete the 2nd folder C:\1\2\Favorites\Photography\FIRE - the problem being that there was an invisible trailing space at the end. I got lucky when I did an auto-complete whilst playing around with the del "\\?\<path>" command which he suggested. NOTE: A normal del did NOT work, nor did deleting from explorer. Now all that is left is the first directory C:\1\2\Favorites\Wien\What To Do.. (yes I tried endlessly with multiple combinations of the above solution ;) Keep 'em coming! =)

  Read the article

• File server share access intermittent/slow/machine unstable: win2k8r2

  - by Jack B.

  I have a file server running Win2k8R2 on an older HP DL380G4. It has nothing set up on it other than file sharing. All drivers/firmware/updates installed. The file server is used as a dump for a bunch of test machines - so essentially a lot of small files are being written to it. It was working fine until it started showing the following symptoms: Shares became either very slow/intermittent or could not access them at all. Logging in the the server, you could use it like normal but windows would start freezing and eventually you had to hard reboot it because nothing was responsive. After rebooting, it would work fine for 20min-2hours and then degrade into this broken state again. Some info after investigation: HP Raid Config utility shows the Raid array as functioning properly (RAID5 btw). Event log shows a bunch of DoS attacks from the test machines, saying it has disconnected the connection a. AFAIK (not part of my job) the test machines haven't changed the way they log information to this server or the amount of them hasn't increased. b. Nothing is infected, this server was scanned fully, and the test machines are re-imaged almost daily. Nothing in performance monitor shows as anything being pegged at maximum (CPU/HD/Network/RAM) I installed MS Network Monitor and it is showing a lot of traffic The server was using one gigabit Ethernet connection, I connected the second one as well with the same results. Forgot to add - one of the commonly written to dirs on the share has over 16k subdirs in it, with a crapton of small files within those dirs. Some of the OS instability was slow access to the drive which has this directory - perfmon doesn't show much activity on the HD though so I'm not sure if this crowded dir is the cause. Here is one important fact: I ran into this issue 2-3 months ago, couldn't figure it out, but I had a spare identical machine so I swapped them out (thought it was related to the machine), and now I have the same issue. Also, the computer will be stable if I turn off file sharing. So is the server just getting DoS'd by the test machines? I've never dealt with such an issue. Is instability in the server's OS common when getting DoS'd? Is there anything I can do to confirm this before telling the owners of the test machines to optimize their traffic? (I'm not sure what they'll be able to do). Is there something within Win2k8R2 that can balance the traffic across the two NICs? Any help would be appreciated. Update: Another thought - the drive with the share is RAID5 across 6 SCSI320 300GB HDs. They are near full capacity about 100GB from 1TB left. Could the amount of tiny files could be causing some weirdness with the parity in this array? I think I've read something about this in the past but I'm no expert on RAID.

  Read the article

• RAID controller dropping the wrong drive

  - by bramp

  I've been having an issue with 3ware 9500S-8 RAID 10, and I have contracted their tech support, but I wanted to hear the serverfault community's recommendations. Firstly, all my data is backuped and secure, so I don't mind blowing my RAID away if I have to. But let me describe the problem I've been seeing. A month ago, disk 6 dropped out of the RAID. It is mirrored with disk 7, so I wasn't that bothered. I went to the data centre and replaced it. When I got back to the office, I noticed that disk 6 will still not in the RAID, and in fact the controller was show the name of the old drive still. A week later I went back and replace the drive again, thinking I might have swapped in a bad drive. Still the same problem. I decided to reboot the machine, to see if that would "force" the controller into seeing the new drive. It did, and a rebuild started to happen (from disk 7). Eventually both drives were showing as good. A week later, the MySQL database has flagged the database is corrupt, and is unable to repair it. I don't know what has gone wrong, but I suspected this 6-7 pair. At this point I noticed that the RAID had constantly been verifying itself, over and over. Regardless of this I began to rebuild the database, which took about 19 hours. It's a big database. Near the end of the repair, the RAID controller told me it had dropped disk 7, and that some data was most likely corrupted. I contacted LSI tech support, and they very promptly started to help me. I mentioned that drive 7 had been dropped. They suspect that drive 7 was always at fault, and drive 6 had always been good. I want to know how often a RAID controller would drop the wrong drive (in this case dropping drive 6 a month ago, instead of 7). I foolishly didn't run smartctl on the drives before I started swapping them out. I just assumed the RAID controller knew what it was talking about. I think my plan of action is to replace drive 7, rebuild the array from scratch, double check smartctl on ALL the disks, and then start restoring my data again. I would appreciate anyone's input on what the correct procedure for swapping drives is, and how often failures like this happen. If anyone would like more information then I'd be happy to provide it. thanks in advance. Oh some more information. I'm running CentOS 5.3, with two RAID arrays, a simple RAID 1 for the OS, and RAID 10 for the database. Both arrays are on different controllers. The RAID 10 is made of 10 identical ST3640323AS drives, until I swapped in a SAMSUNG HD103SJ last month.

  Read the article

• .AVI Files randomly cease to open, other strange errors too

  - by Ben Franchuk

  I Recently (a couple weeks ago) downloaded the complete series of Seinfeld, all in varying file type. I Watched them in sequence according to season and to airing date, and all was well. All of the files played fine with my media player of choice ("BS Player"), and once I had finished, I went onto watch some other TV I had previously downloaded (The U.S. Series of "The Office"), and after then, some other film and then some music, over the following weeks (keep in mind all of these files are all on the same Hard Drive). Later then, More recently, I Went back to watching Seinfeld. The episodes played well as they did before- with the exclusion of a few in Season 7. I Have not tested all of the episodes in the season, but upon inspection, the majority of them are experiencing this problem; the problem being simply that they don't open! BS Player says that the files are either damaged or that the codecs to play the files are not on my computer-- however I am certain that the files DO have the codecs, and I am pretty sure that they are NOT DAMAGED either. I Have played the files with other players (such as VLC, Media Player Classic, and Windows Media Player), too, only to the same result; of them not opening. Seemingly the only way that I can differentiate between a damaged file and a non-damaged file are the way that the icon shows in Windows Explorer. For example, the below image is how explorer shows the information of a file that is non-damaged... ...and below is how a damaged file appears... The most disturbing and confusing part of this, though, is the last episode in the season- It opens, but not as a video- Instead, as a 1 Hour, 16 Minute, and 35 Second Audio file! The file plays a song for the first 4 or so minutes, and then is pretty much silent (except for some extremely quiet noise) until the last minute or so, when a random array of chopped up sounds and beeping noises play. I Do not recognise the song at the beginning of the file, but by the sounds of it, it is a song by the artist "Mr. Oizo," who's complete works I downloaded a couple weeks before now; and a bit before then I had finished downloading season 9 (not affected by these problems) of Seinfeld. I'd also like to note that the file I told of earlier (which played audio instead of video) reads as the same size as the other files in the season (around 175 MB) and also opens as a video clip. I Have NEVER experienced any of these problems in the past, and they seem to be only effecting the one season of my downloaded TV. The problems have not arisen with any of the other files on my Hard Drive, or any of the files downloaded around the time or after the time of which I downloaded season 7 of Seinfeld- or at least to my noticing. I Use the hard drive these files are located on almost every day, so could that be the cause of these problems? Is this a sign that my HDD is soon going to die? If it helps, the HDD is a Western Digital MyBook 1.5 TB 7500 RPM. It is connected to the computer via U.S.B. 2.0. EDIT! I noticed that this problem is now occurring with Season 9 of Seinfeld- and, presumably, other files on the drive I have yet to check. Please, If you have ANY IDEA AT ALL on what may be causing this or how to fix it, do tell me!

  Read the article

• How to use a different Ethernet connection

  - by SteveC

  I'm running a virtual machine at home which has a VPN connection to our main office, but I also want to connect to a share on another machine at home. When I check with IPCONFIG I can see two ethernet connections ... my work VPN ... Ethernet adapter Local Area Connection* 11: Connection-specific DNS Suffix . : Link-local IPv6 Address . . . . . : xxxx::xxxx:xxxx:xxxx:xxxxxxx IPv4 Address. . . . . . . . . . . : XXX.XXX.XXX.XXX Subnet Mask . . . . . . . . . . . : 255.255.254.0 Default Gateway . . . . . . . . . : XXX.XXX.XXX.XXX and home local ... Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : lan Link-local IPv6 Address . . . . . : xxxx::xxxx:xxxx:xxxx:xxxxxxx IPv4 Address. . . . . . . . . . . : 192.168.1.70 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : What's weird is when I've been working before with a plugged-in ethernet cable I've not had any problem getting to the share? I can PING the other machine, but I can't access the share at ... \\othermachine\c$ I tried 'TRACERT` but that disappears off to the work network and eventually gets back to the local other machine after a few time-outs Is there anyway to "force" the connection to stay local ? UPDATE: the VPN is AEP SSL Tunnel

  Read the article

< Previous Page | 407 408 409 410 411 412 413 414 415 416 417 418  | Next Page >