Search Results

Search found 13859 results on 555 pages for 'non functional'.

Page 411/555 | < Previous Page | 407 408 409 410 411 412 413 414 415 416 417 418  | Next Page >

  • What is the best way to implement collision detection using Bullet physics engine and a track generated from a curve?

    - by tigrou
    I am developing a small racing game were the track is generated from a curve. As said above, the track is generated, but not infinite. The track of one level could fit with no problem in memory and will contain a reasonably small amount of triangles. For collisions, I would like to use Bullet physics engine and know what is the best way to handle collisions with the track efficiently. NOTE : The track will be stored as a static rigid body (mass = 0). The player will be represented by a sphere shape for collisions. Here is some possibilities i have in mind : Create one rigid body, then, put all triangles of the track (except non collidable stuff) into it. Result : 1 body with many triangles (eg : 30000 triangles) Split the track into several sections (eg: 10 sections). Then, for each section, create a rigid body and put corresponding triangles in it. Result : small amount of bodies with relatively small amount of triangles (eg : 1500 triangles per section). Split the track into many sub-sections (eg : 1200 sections). Here one subsection = very small step when generating the curve. Again for each sub-section, create a body and put triangles in it. Result : many bodies with very small amount of triangles (eg : 20 triangles). Advantage : it could be possible to "extra data" to each of the subsection, that could be used when handling collisions. Same as 2, but only put sections N and N+1 in physics engine (where N = current section where the player is). When player reach section N+1, unload section N and load section N+2 and so on... Issue : harder to implement, problems if the player suddenly "jump" from one section to another (eg : player fly away from section N, and fall on section N + 4 that was underneath : no collision handled, player will fall into void ) Same as 4, but with many sub-sections. Issues : since subsections are very small there will be constantly new bodies added and removed to physics engine at runtime. Possibilities for player to accidently skip some sections and fall into the void are higher than 4.

    Read the article

  • Update Errors in Xubuntu 12.10

    - by wil
    I updated by computer from 12.04 to 12.10 and after I finished updating when I turned on my computer I am unable to update my computer. I tried install a new copy of 13.04 but my cpu doesn't support pae. I have a IBM Thinkpad T42 with a 1.7 gigahertx Cpu. When updating through terminal This is the output. sudo apt-get upgrade: [sudo] password for wil: Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: linux-image-extra-3.5.0-34-generic : Depends: linux-image-3.5.0-34-generic but it is not installed linux-image-generic : Depends: linux-image-3.5.0-34-generic but it is not installed E: Unmet dependencies. Try using -f. sudo apt-get upgrade -f: Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following NEW packages will be installed: linux-image-3.5.0-34-generic 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. 3 not fully installed or removed. Need to get 0 B/11.8 MB of archives. After this operation, 25.9 MB of additional disk space will be used. Do you want to continue [Y/n]? y (Reading database ... 191530 files and directories currently installed.) Unpacking linux-image-3.5.0-34-generic (from .../linux-image-3.5.0-34-generic_3.5.0-34.55_i386.deb) ... This kernel does not support a non-PAE CPU. dpkg: error processing /var/cache/apt/archives/linux-image-3.5.0-34-generic_3.5.0-34.55_i386.deb (--unpack): subprocess new pre-installation script returned error exit status 1 No apport report written because MaxReports is reached already Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.5.0-34-generic /boot/vmlinuz-3.5.0-34-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.5.0-34-generic /boot/vmlinuz-3.5.0-34-generic Errors were encountered while processing: /var/cache/apt/archives/linux-image-3.5.0-34-generic_3.5.0-34.55_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1) wil@wil-ThinkPad-T42:~/Desktop$

    Read the article

  • Eloqua Experience 2013: Mystique, Modern Marketing and Masterful Engagement

    - by Mike Stiles
    The following is a guest post from Erick Mott, a social business leader at Oracle Eloqua. There’s a growing gap between 20th century marketing and a modern marketing way of doing business. I can’t think of a better example of modern marketing in action than what more than 2,000 people experienced in San Francisco at #EE13; customer-obsession, multichannel content, and real-time engagement all coming together at one extraordinary event. This was my first Eloqua Experience as a new Oracle Eloqua employee. In weeks prior, I heard about the mystique but didn’t know what to expect. What I’ve come to understand with more clarity is everything we do revolves around customer success, and we operate and educate at all times with these five tenets in mind: 1. Targeting: Really Know Your Buyer 2. Engagement: Create a 1:1 Relationship 3. Conversion: Visualize Guided Thinking 4. Analysis: Learn What’s Working 5. Marketing Technology: Enable and Extend the Cloud Product News from Eloqua Experience 2013 We made some announcements that John Stetic, VP of Products, Oracle Eloqua covers in this brief ‘Modern Marketing Minute’ video recorded after Wednesday’s keynote; summarized below, too: Oracle Eloqua AdFocus: While understanding the impact of a specific marketing channel was formerly relegated to marketers’ wish lists, the channels we now focus on are digital, social, and mobile. AdFocus gives marketers a single platform to dynamically create, manage and measure display ads alongside owned and earned media. AdFocus enables marketers to target only key accounts or prospects you want to reach with display ads, as well as provide creative content or personalized ad copy based on their persona and activities. Oracle Eloqua Profiler: The details of what we now know about customers have expanded into a universal customer profile, which can be used to create highly targeted segments. Marketers now can take data that’s not even stored in Eloqua to help targeted and score prospects for a complete, multichannel view of the customer. Profiler gives sales reps one, detailed view of the prospect to extend views beyond Oracle Eloqua asset activity (emails, forms, page views) to any external assets stored in Oracle Eloqua. Marketing Resource Management: New capabilities create more secure and controlled access to marketing resources and data. New integrations provide greater insight into campaign resources and management through a central marketing calendar and simplify resource management. Integrated Sales and Marketing Funnel: An integrated sales and marketing funnel view gives marketing and sales users, cross-functional teams, and executive management a consistent and clear view of pipeline performance. It also quickly provides users with historical metrics across different time spans and conditions. Eloqua AppCloud: More than 20 new AppCloud partners have been added to the community, which now includes 100+ apps. Eloqua AppCloud now provides modern marketers with an even broader range of marketing applications that help expand and enrich sales and marketing efforts; easily accessible in the Topliners Community. Social Capabilities: Recent integration between Oracle Eloqua and Oracle Social Relationship Management (SRM) deliver a comprehensive, scalable and integrated modern marketing solution. New capabilities include better tracking of social activities for a more complete customer profile. Engage Facebook custom audiences with AdFocus to deliver ads and meaningful experiences through trusted social networks. Biggest and Best Eloqua Experience. There’s a lot of talk in the industry about the Marketing Cloud. At Oracle Eloqua, we have been on a mission of delivering the most advanced and integrated modern marketing technology on the planet. It’s not just a concept but reality with proven execution, as seen first-hand this week in San Francisco. In this video, Kevin Akeroyd, SVP of Oracle Eloqua, provides some highlights of what made this year’s Eloqua Experience, exceptional, including Steve Woods’ presentation about the journey of modern marketers and Andrea Ward’s conversation with Vince Gilligan, creator of the Breaking Bad television series. The 2013 Markie Awards The Oracle Eloqua Marketing Cloud was best exemplified for me as 19 Markies were awarded to customers for their exceptional creativity and results as modern marketers. Wow, what a night to remember with so many committed and talented people working to create an extraordinary experience! To learn more about how to become a modern marketer, check out these resources. We look forward to seeing you next year at Eloqua Experience. More on Erick: 20 years experience at Oracle, Ektron, Sitecore, Lyris, Habeas, Nokia, creatorbase, Mark Monitor, Cisco Systems, GlobalFluency, Sun Microsystems, Philips NV, Elm Products and CBS TV. Patent holder with agency, Fortune 500, media, and startup company expertise. @mikestiles

    Read the article

  • How do I know if I am using Scrum methodologies?

    - by Jake
    When I first started at my current job, my purpose was to rewrite a massive excel-VBA workbook-application to C# Winforms because it was thought that the new C# app will fix all existing problems and have all the new features for a perfect world. If it were a direct port, in theory it would be easy as i just need to go through all the formulas, conditional formatting, validations, VBA etc. to understand it. However, that was not the case. Many of the new features are tightly dependant on business logic which I am unfamiliar with. As a solo programmer, the first year was spent solely on deciphering the excel workbook and writing the C# app. In theory, I had the business people to "help" me specify requirements, how GUI looks and work, and testing of the app etc; but in practice it is like a contant tsunami of feature creep. At the beginning of the second year I managed to convince the management that this is not going anywhere. I made them start from scratch with the excel-VBA. I have this "issue log" saved on the network, each time they found something they didn't like about the excel-VBA app, they will write it in there. I check the log daily and consolidate issues (in my mind) mainly into 2 groups: (1) requires massive change. (2) can be fixed in current version. For massive change issues, I make a copy of the latest excel-VBA and give it a new version number, then work on it whenever I can. For current version fixes, I make the changes in a few days to a week, and then immediately release it. I also ensure I update the same change in any in-progress massive change future versions. This has gone on for about 4 months and I feel it works great. I made many releases and solved many real issues, also understood the business logic more and more. However, my boss (non-IT trained) thinks what I am doing are just adhoc changes and that i am not looking at the "bigger picture". I am struggling to convince my boss that this works. So I hope to formalise my approach and maybe borrow a buzzword to confuse him. Incidentally, I read about Agile and SCRUM, about backlog and sprints. But it's all very vague to me still. QUESTION (finally): I want to tell him that this is SCRUM! But I want to hold my breath first and ask whether my current approach is considered SCRUM or SCRUM-like? How can I make it more SCRUM-like? Note that I have only myself, there's no project leader or teams.

    Read the article

  • Legitimate use of the Windows "Documents" folder in programs.

    - by romkyns
    Anyone who likes their Documents folder to contain only things they place there knows that the standard Documents folder is completely unsuitable for this task. Every program seems to want to put its settings, data, or something equally irrelevant into the Documents folder, despite the fact that there are folders specifically for this job1. So that this doesn't sound empty, take my personal "Documents" folder as an example. I don't ever use it, in that I never, under any circumstances, save anything into this folder myself. And yet, it contains 46 folders and 3 files at the top level, for a total of 800 files in 500 folders. That's 190 MB of "documents" I didn't create. Obviously any actual documents would immediately get lost in this mess. My question is: can anything be done to improve the situation sufficiently to make "Documents" useful again, say over the next 5 years? Can programmers be somehow educated en-masse not to use it as a dumping ground? Could the OS start reporting some "fake" location hidden under AppData through the existing APIs, while only allowing Explorer and the various Open/Save dialogs to know where the "real" Documents folder resides? Or are any attempts completely futile or even unnecessary? 1For the record, here's a quick summary of the various standard directories that should be used instead of "Documents": RoamingAppData for user-specific data and settings. This is the directory to use for user-specific non-temporary data. Anything placed here will be available on any machine that a given user logs on to in networks where this is configured. Do not place large files here though, because they slow down login/logout in such environments. LocalAppData for user-and-machine-specific data and settings. This data differs for every user and every machine. This is also where very large user-specific data should be placed. ProgramData for machine-specific data and settings. These are the same regardless of which user is logged on, and will not roam to other machines in a network. GetTempPath for all files that may be wiped without loss of data when not in use. This is also the place for things like caches, because like temporary data, a cache does not need to be backed up. Place your huge cache here and you'll save your user some backup trouble. "Documents" itself should only ever be used if the user specified it manually by entering a path or selecting it in a Save dialog. That is the only time it is ever appropriate to save stuff in "Documents".

    Read the article

  • Learning by doing (and programming by trial and error)

    - by AlexBottoni
    How do you learn a new platform/toolkit while producing working code and keeping your codebase clean? When I know what I can do with the underlying platform and toolkit, I usually do this: I create a new branch (with GIT, in my case) I write a few unit tests (with JUnit, for example) I write my code until it passes my tests So far, so good. The problem is that very often I do not know what I can do with the toolkit because it is brand new to me. I work as a consulant so I cannot have my preferred language/platform/toolkit. I have to cope with whatever the customer uses for the task at hand. Most often, I have to deal (often in a hurry) with a large toolkit that I know very little so I'm forced to "learn by doing" (actually, programming by "trial and error") and this makes me anxious. Please note that, at some point in the learning process, usually I already have: read one or more five-stars books followed one or more web tutorials (writing working code a line at a time) created a couple of small experimental projects with my IDE (IntelliJ IDEA, at the moment. I use Eclipse, Netbeans and others, as well.) Despite all my efforts, at this point usually I can just have a coarse understanding of the platform/toolkit I have to use. I cannot yet grasp each and every detail. This means that each and every new feature that involves some data preparation and some non-trivial algorithm is a pain to implement and requires a lot of trial-and-error. Unfortunately, working by trial-and-error is neither safe nor easy. Actually, this is the phase that makes me most anxious: experimenting with a new toolkit while producing working code and keeping my codebase clean. Usually, at this stage I cannot use the Eclipse Scrapbook because the code I have to write is already too large and complex for this small tool. In the same way, I cannot use any more an indipendent small project for my experiments because I need to try the new code in place. I can just write my code in place and rely on GIT for a safe bail-out. This makes me anxious because this kind of intertwined, half-ripe code can rapidly become incredibly hard to manage. How do you face this phase of the development process? How do you learn-by-doing without making a mess of your codebase? Any tips&tricks, best practice or something like that?

    Read the article

  • WebCenter Customer Spotlight: Alberta Agriculture and Rural Developmen

    - by me
    Author: Peter Reiser - Social Business Evangelist, Oracle WebCenter  Solution SummaryAlberta Agriculture and Rural Development is a government ministry that works with producers and consumers to create a strong, competitive, and sustainable agriculture and food industry in the province of Alberta, Canada The primary business challenge faced by the Alberta Ministry of Agriculture was that of managing the rapid growth of their information.  They needed to incorporate a system that would work across 22 different divisions within the ministry and deliver an improved and more efficient experience for Desktop, Web and Mobile users, while addressing their regulatory compliance needs as part of the Canadian government. The customer implemented a centralized Enterprise Content Management solution based on Oracle WebCenter Content and developed a strong and repeatable information life cycle management methodology across all their 22 divisions and agencies. With the implemented solution, Alberta Agriculture and Rural Development  centrally manages over 20 million documents for 22 divisions and agencies and they have improved time required to find records,  reliability of information, improved speed and accuracy of reporting and data security. Company OverviewAlberta Agriculture and Rural Development is a government ministry that works with producers and consumers to create a strong, competitive, and sustainable agriculture and food industry in the province of Alberta, Canada.  Business ChallengesThe business users were overwhelmed by growth in documents (over 20 million files across 22 divisions and agencies) and it was difficult to find and manage documents and versions. There was a strong need for a personalized easy-to-use, secure and dependable method of managing and consuming content via desktop, Web, and mobile, while improving efficiency and maintaining regulatory compliance by removing the risk of non-uniform approaches to retention and disposition. Solution DeployedAs a first step Alberta Agriculture and Rural Development developed a business case with clear defined business drivers: Reduce time required to find records Locate “lost” records Capture knowledge lost through attrition Increase the ease of retrieval Reduce personal copies Increase reliability of information Improve speed and accuracy of reporting Improve data security The customer implemented a centralized Enterprise Content Management solution based on Oracle WebCenter Content. They used an incremental implementation approach aligned with their divisional and agency structure which allowed continuous process improvement. This led to a very strong and repeatable information life cycle management methodology across all their 22 divisions and agencies. Business ResultsAlberta Agriculture and Rural Development achieved impressive business results: Centrally managing over 20 million files for 22 divisions and agencies Federated model to manage documents in SharePoint and other applications Doing records management for both paper and electronic records Reduced time required to find records Increased the ease of retrieval Increased reliability of information Improved speed and accuracy of reporting Improved data security Additional Information Oracle Open World 2012 Presentation Oracle WebCenter Content

    Read the article

  • You probably have enough

    - by BuckWoody
    This a decidedly non-technical post, and even a little preachy. I post it here because you, the technical professional, are the perfect audience for it. I have enough stuff. I never think so, of course, but I do. I don’t consider myself rich, but if you have a comfortable place to sleep,  enough food to eat and you can plan for your future, you are rich. And when we are rich enough to have “enough” stuff, that usually means we have too much stuff. Stuff costs money that could be put to better use, stuff needs painting, cleaning, fueling, feeding, storage and caring for. Stuff is a burden. So I decided a few years back that I had enough stuff. We gave away a lot of things, and we don’t buy any new (meaning we didn’t have one before)  things – only replacement things. We’d rather “do something” than “have something”. But even so, when birthdays, anniversaries and Christmas rolled around, we got more stuff. So I asked all of my friends and relatives to do something for me.   I ask folks that want to give me a gift (for whatever reason) to donate the price they would have paid for the gift to a charity they care about. This does a few things: They have to find a charity to care about The fact that I made it through a calendar year now actually means something Someone else gets the help they need Everybody feels better No, I’m not saying these things so you’ll think I’m a wonderful person - the reason I’m posting this here is that as a technical professional you probably have enough stuff like I do. So I ask you to try this out. Try it for one birthday, or one Holiday, or even for a year. I can promise this: it will change your life, the life of the person who gives the gift, and the person’s life who receives it. If you do try it, I’d love to have a comment here on your thoughts.

    Read the article

  • TechEd 2010 Day Three: The Database Designer (Isn't)

    - by BuckWoody
    Yesterday at TechEd 2010 here in New Orleans I worked the front-booth, answering general SQL Server questions for the masses. I was actually a little surprised to find most of the questions I got were from folks that wanted to know more about Stream Insight and Master Data Services. In past conferences I've been asked a lot of "free consulting" questions, about problems folks have had from older products. I don't mind that a bit - in fact, I'm always happy to help in any way I can. But this time people are really interested in the new features in the product, and I like that they are thinking ahead, not just having to solve problems in production. My presentation was on "Database Design in an Hour". We had the usual fun, and SideShow Bob made an appearance - I kid you not. The guy in the back of the room looked just like Sideshow Bob, so I quickly held a "bes thair" contest, and he won. Duing the presentation, I explain the tools you can use to design databases. I also explain that the "Database Designer" tool in SQL Server Management Studio (SSMS) isn't truly a desinger - it uses non-standard notation, doesn't have a meta-data dictionary, and worst of all, it works at the physical level. In other words, whatever you do in SSMS will automatically change the field/table/relationship structures in the database. We fixed this in SSMS 2008 and higher by adding an option to block that, but the tool is not a good design function nonetheless. To be fair, no one I know of at Microsoft recommends that it is - but I was shocked to hear so many developers in the room defending it as a good tool. I think the main issue for someone who doesn't have to work with Relational Systems a great deal is that it can be difficult to figure out Foreign Keys. The syntax makes them look "backwards", so it's just easier to grab a field and place it on the table you want to point to. There are options. You can download a couple of free tools (CA has a community edition of ER-WIN, Quest has one, and Embarcadero also has one) and if you design more than one or two databases a year, it may be worth buying a true design tool. For years I used Visio, but we changed it so that it doesn't forward-engineer (create the DDL) any more, so it isn't a true design tool either. So investigate those free and not-so-free tools. You'll find they help you in your job - but stay away from the Database Designer in SSMS. Or I'll send Sideshow Bob over there to straighten you out. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • core.* files eating up server space (~50MB)

    - by skytreader
    I'm renting server space from someone and, upon logging in my control panel after quite sometime, noticed an abnormal spike (~50MB) in the disk usage. Upon investigating, I found a lot of core.* files scattered around my public_html directory. Each one is more than 5MB in size but no more than 6MB. The * part is all numbers (in programming regex, that should be core\.\d+). I downloaded one and checked the contents. There was a lot of balderdash characters (NUL mostly, but also a scattering of ETB, ETX, STX) but there's this block of readable text which says: This text is part of the internal format of your mail folder, and is not a real message. It is created automatically by the mail system software. If deleted, important folder data will be lost, and it will be re-created with the data reset to initial values. Pretty self-explanatory. A few blocks above the text are some more readable messages that look like logs but is sandwiched in between non printable characters. I've extracted some below. Scan not valid for mh mailboxes Bogus character 0x%x in news state Can't rewrite news state %.80s Error closing backup news state %.80s No state for newsgroup %.80s found Now, a few concerns: Am I under attack? The messages seem to be about my webmail but I don't use my personal webmail that much---only for a vanity email address and an inbox for an outdated comments system. However, lately, I seem to notice a spike in the spam for my vanity mail. (Note: the comments system is covered by a captcha but every now and then some get through. My vanity email has a spam filter but it isn't as good as I'd like). Next, if this is a feature, can I turn it off? Is it advisable to? I've only 150MB so you see why I'm fretting over a 50MB spike. Some final details: my only server-side scripts are in PHP. The directory which accumulated the most number of these core files is the one containing the Wordpress-managed subdomain of my site. I manage my server through CPanel. Lastly, I decided to delete this files and after some checking nothing seems amiss in my websites nor in my mail. They are indeed the ones responsible for the ~50MB spike as my disk space usage is back to expected.

    Read the article

  • Keeping your options open in a cloud solution

    - by BuckWoody
    In on-premises solutions we have the full range of options open for a given computing solution – but we don’t always take advantage of them, for multiple reasons. Data goes in a Relational Database Management System, files go on a share, and e-mail goes to the Exchange server. Over time, vendors (including ourselves) add in functionality to one product that allow non-standard use of the platform. For example, SQL Server (and Oracle, and others) allow large binary storage in or through the system – something not originally intended for an RDBMS to handle. There are certainly times when this makes sense, of course, but often these platform hammers turn every problem into a nail. It can make us “lazy” in our design – we sometimes don’t take the time to learn another architecture because the one we’ve spent so much time with can handle what we want to do. But there’s a distinct danger here. In nature, when a population shares too many of the same traits, it can cause a complete collapse if a situation exploits a weakness shared by that population. The same is true with not using the righttool for the job in a computing environment. Your company or organization depends on your knowledge as a professional to select the best mix of supportable, flexible, cost-effective technologies to solve their problems, whether you’re in an architect role or not.  So take some time today to learn something new. The way I do this is to select a given problem, and try to solve it with a technology I’m not familiar with. For instance – create a Purchase Order system in Excel, then in Hadoop or MongoDB, or even in flat-files using PowerShell as an interface. No, I’m not suggesting any of these architectures are the proper way to solve the PO problem, but taking something concrete that you know well and applying that meta-knowledge to another platform will assist you in exercising the “little grey cells” and help you and your organization understand what is open to you. And of course you can do all of this on-premises – but my recommendation is to check out a cloud platform (my suggestion would of course be Windows Azure :) ) and try it there. Most providers (including Microsoft) provide free time to do that.

    Read the article

  • kubuntu: wireless manager can't find any networks

    - by timuçin
    I just installed Kubuntu 12.10 and as I knew my wireless driver would not be recognized, I installed it manually through here. I suppose I shall mention that I also had to do this. The driver worked just fine until I restarted my system. Since then I can't even start over. My wireless card is realtek 8723 The oly lead I have is this piece of log: 11/14/12 07:35:21 AM timucin-W150ER NetworkManager[989] <info> wpa_supplicant started 11/14/12 07:35:21 AM timucin-W150ER NetworkManager[989] <info> (wlan0) supports 4 scan SSIDs 11/14/12 07:35:21 AM timucin-W150ER NetworkManager[989] <info> (wlan0): supplicant interface state: starting -> ready 11/14/12 07:35:21 AM timucin-W150ER NetworkManager[989] <info> (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42] 11/14/12 07:35:21 AM timucin-W150ER NetworkManager[989] <warn> Trying to remove a non-existant call id. 11/14/12 07:35:21 AM timucin-W150ER NetworkManager[989] <info> (wlan0): supplicant interface state: ready -> inactive 11/14/12 07:35:21 AM timucin-W150ER NetworkManager[989] <info> (wlan0) supports 4 scan SSIDs I feel really bad that I have been trying so many things and even while I am trying them I get a problem at every step. I am really frustrated. You can the time in the logs, I didn't get up early. Just needed to share my feelings. Even the ethernet cable I have use is short for God's sake, I have had to sit at this massively uncomfortable posture for hours. edit: I discovered something interesting. When I boot my windows I see that my wireless manager says "disconnected" now. However when I start ubuntu after windows and modprobe rtl8723e wireless works just fine. Then again, when I restart ubuntu I am back where I have started. So now I have to start windows, restart my machine and do the modprobe thing to see wireless networks.

    Read the article

  • How can we unify business goals and technical goals?

    - by BAM
    Some background I work at a small startup: 4 devs, 1 designer, and 2 non-technical co-founders, one who provides funding, and the other who handles day-to-day management and sales. Our company produces mobile apps for target industries, and we've gotten a lot of lucky breaks lately. The outlook is good, and we're confident we can make this thing work. One reason is our product development team. Everyone on the team is passionate, driven, and has a great sense of what makes an awesome product. As a result, we've built some beautiful applications that we're all proud of. The other reason is the co-founders. Both have a brilliant business sense (one actually founded a multi-million dollar company already), and they have close ties in many of the industries we're trying to penetrate. Consequently, they've brought in some great business and continue to keep jobs in the pipeline. The problem The problem we can't seem to shake is how to bring these two awesome advantages together. On the business side, there is a huge pressure to deliver as fast as possible as much as possible, whereas on the development side there is pressure to take your time, come up with the right solution, and pay attention to all the details. Lately these two sides have been butting heads a lot. Developers are demanding quality while managers are demanding quantity. How can we handle this? Both sides are correct. We can't survive as a company if we build terrible applications, but we also can't survive if we don't sell enough. So how should we go about making compromises? Things we've done with little or no success: Work more (well, it did result in better quality and faster delivery, but the dev team has never been more stressed out before) Charge more (as a startup, we don't yet have the credibility to justify higher prices, so no one is willing to pay) Extend deadlines (if we charge the same, but take longer, we'll end up losing money) Things we've done with some success: Sacrifice pay to cut costs (everyone, from devs to management, is paid less than they could be making elsewhere. In return, however, we all have creative input and more flexibility and freedom, a typical startup trade off) Standardize project management (we recently started adhering to agile/scrum principles so we can base deadlines on actual velocity, not just arbitrary guesses) Hire more people (we used to have 2 developers and no designers, which really limited our bandwidth. However, as a startup we can only afford to hire a few extra people.) Is there anything we're missing or doing wrong? How is this handled at successful companies? Thanks in advance for any feedback :)

    Read the article

  • Is software support an option for your career?

    - by Maria Sandu
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 If you have a technical background, why should you choose a career in support? We have invited Serban to answer these questions and to give us an overview of one of the biggest technical teams in Oracle Romania. He’s been with Oracle for 7 years leading the local PeopleSoft Financials & Supply Chain Support team. Back in 2013 Serban started building a new support team in Romania – Fusion HCM. His current focus is building a strong support team for Fusion HCM, latest solution for Business HR Professionals from Oracle. The solution is offered both on Premise (customer site installation) but more important as a Cloud offering – SaaS.  So, why should a technical person choose Software Support over other technical areas?  “I think it is mainly because of the high level of technical skills required to provide the best technical solutions to our customers. Oracle Software Support covers complex solutions going from Database or Middleware to a vast area of business applications (basically covering any needs that a large enterprise may have). Working with such software requires very strong skills both technical and functional for the different areas, going from Finance, Supply Chain Management, Manufacturing, Sales to other very specific business processes. Our customers are large enterprises that already have a support layer inside their organization and therefore the Oracle Technical Support Engineers are working with highly specialized staff (DBA’s, System/Application Admins, Implementation Consultants). This is a very important aspect for our engineers because they need to be highly skilled to match our customer’s specialist’s expectations”.  What’s the career path in your team? “Technical Analysts joining our teams have a clear growth path. The main focus is to become a master of the product they will support. I think one need 1 or 2 years to reach a good level of understanding the product and delivering optimal solutions because of the complexity of our products. At a later stage, engineers can choose their professional development areas based on the business needs and preferences and then further grow towards as technical expert or a management role. We have analysts that have more than 15 years of technical expertise and they still learn and grow in technical area. Important fact is, due to the expansion of the Romanian Software support center, there are various management opportunities. So, if you want to leverage your experience and if you want to have people management responsibilities Oracle Software Support is the place to be!”  Our last question to Serban was about the benefits of being part of Oracle Software Support. Here is what he said: “We believe that Oracle delivers “State of the art” Support level to our customers. This is not possible without high investment in our staff. We commit from the start to support any technical analyst that joins us (being junior or very senior) with any training needs they have for their job. We have various technical trainings as well as soft-skills trainings required for a customer facing professional to be successful in his role. Last but not least, we’re aiming to make Oracle Romania SW Support a global center of excellence which means we’re investing a lot in our employees.”  If you’re looking for a job where you can combine your strong technical skills with customer interaction Oracle Software Support is the place to be! Send us your CV at [email protected]. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

    Read the article

  • MySQL Connector/Net 6.6.4 RC1 has been released

    - by fernando
    MySQL Connector/Net 6.6.4, a new version of the all-managed .NET driver  for MySQL has been released.  This is the Release Candidate intended to introduce users to the new features in the release.  This release is feature complete it should be stable enough for users to understand the new features and how we expect them to work.  As is the case with all non-GA releases, it should not be used in any production environment.  It is appropriate for use with MySQL server versions 5.0-5.6 It is now available in source and binary form from http://dev.mysql.com/downloads/connector/net/#downloads and mirror sites (note that not all mirror sites may be up to date at this point-if you can't find this version on some mirror, please try again later or choose another download site.) The 6.6 version of MySQL Connector/Net brings the following new features:   * Stored routine debugging   * Entity Framework 4.3 Code First support   * Pluggable authentication (now third parties can plug new authentications mechanisms into the driver).   * Full Visual Studio 2012 support: everything from Server Explorer to Intellisense&  the Stored Routine debugger. The following specific fixes are addressed in this version: - Fixed Entity Framework + mysql connector/net in partial trust throws exceptions (MySql bug #65036, Oracle bug #14668820). - Added support in Parser for Datetime and Time types with precision when using Server 5.6 (No bug Number). - Fix for bug TIMESTAMP values are mistakenly represented as DateTime with Kind = Local (Mysql bug #66964, Oracle bug #14740705). The release is available to download athttp://dev.mysql.com/downloads/connector/net/6.6.html Documentation ------------------------------------- You can view current Connector/Net documentation at http://dev.mysql.com/doc/refman/5.5/en/connector-net.html For specific topics: Stored Routine Debugger:http://dev.mysql.com/doc/refman/5.5/en/connector-net-visual-studio-debugger.html Authentication plugin:http://dev.mysql.com/doc/refman/5.5/en/connector-net-programming-authentication-user-plugin.html You can find our team blog at http://blogs.oracle.com/MySQLOnWindows. You can also post questions on our forums at http://forums.mysql.com/. Enjoy and thanks for the support!

    Read the article

  • Strategy for avoiding duplicate object ids for data shared across devices using iCloud

    - by rmaddy
    I have a data intensive iOS app that is not using CoreData nor does it support iCloud synching (yet). All of my objects are created with unique keys. I use a simple long long initialized with the current time. Then as I need a new key I increment the value by 1. This has all worked well for a few years with the app running isolated on a single device. Now I want to add support for automatic data sync across devices using iCloud. As my app is written, there is the possibility that two objects created on two different devices could end up with the same key. I need to avoid this possibility. I'm looking for ideas for solving this issue. I have a few requirements that the solution must meet: 1) The key needs to remain a single integral data type. Converting all existing keys to a compound key or to a string or other type would affect the entire code base and likely result in more bugs than it's worth. 2) The solution can't depend on an Internet connection. A user must be able to run the app and add data even with no Internet connection. The data should still resolve properly later when the data syncs through iCloud once a connection is available. I'll accept one exception to this rule. If no other option is available, I may be open to requiring an Internet connection the first time the app's data is initialized. One idea I have been toying around with in my head is logically splitting the integer key into two parts. The high 4 or 5 bits could be used as some sort of device id while the rest represents the actual key. The fuzzy part is figuring out how to come up with non-conflicting device ids that fit in a few bits. This should be viable since I don't need to deal will millions of devices. I just need to deal with the few devices that would be shared by a given iCloud account. I'm open to suggestions. Thanks.

    Read the article

  • PHP - Internal APIs/Libraries - What makes sense?

    - by Mark Locker
    I've been having a discussion lately with some colleagues about the best way to approach a new project, and thought it'd be interesting to get some external thoughts thrown into the mix. Basically, we're redeveloping a fairly large site (written in PHP) and have differing opinions on how the platform should be setup. Requirements: The platform will need to support multiple internal websites, as well as external (non-PHP) projects which at the moment consist of a mobile app and a toolbar. We have no plans/need in the foreseeable future to open up an API externally (for use in products other than our own). My opinion: We should have a library of well documented native model classes which can be shared between projects. These models will represent everything in our database and can take advantage of object orientated features such as inheritance, traits, magic methods, etc. etc. As well as employing ORM. We can then add an API layer on top of these models which can basically accept requests and route them to the appropriate methods, translating the response so that it can be used platform independently. This routing for each method can be setup as and when it's required. Their opinion: We should have a single HTTP API which is used by all projects (internal PHP ones or otherwise). My thoughts: To me, there are a number of issues with using the sole HTTP API approach: It will be very expensive performance wise. One page request will result in several additional http requests (which although local, are still ones that Apache will need to handle). You'll lose all of the best features PHP has for OO development. From simple inheritance, to employing the likes of ORM which can save you writing a lot of code. For internal projects, the actual process makes me cringe. To get a users name, for example, a request would go out of our box, over the LAN, back in, then run through a script which calls a method, JSON encodes the output and feeds that back. That would then need to be JSON decoded, and be presented as an array ready to use. Working with arrays, as appose to objects, makes me sad in a modern PHP framework. Their thoughts (and my responses): Having one method of doing thing keeps things simple. - You'd only do things differently if you were using a different language anyway. It will become robust. - Seeing as the API will run off the library of models, I think my option would be just as robust. What do you think? I'd be really interested to hear the thoughts of others on this, especially as opinions on both sides are not founded on any past experience.

    Read the article

  • Website directory structure regarding subdomains, www, and "global" content

    - by Pawnguy7
    I am trying to make a homemade HTTP server. It occurs to me, though, I never fully understood what you might call "relativity" among web pages. I have come across that www. is a subdomain, and I understand its original purpose. IT sounds like, in general, you would redirect (is that 301 or 302?) it to a... non-subdomain, sort of. As in, redirecting www.example.com to example.com. I am not entirely sure how to make this work when retrieving files for an HTTP server though. I would assume that example.com would be the root, and www manifests as a folder within it. I am unsure. There is also the question of multi-level subdomains, e.g. subdomain2.subdomain1.example.com. It seems to me they are structured "backwards", where you go from the root left in folder structure. In this situation, subdomain2 is a directory within subdomain1, which is a directory in the root. Finally, it occurs to me I might want a sort of global location. For example, maybe all subdomains still use an image as a logo. It makes more sense to me that there is one image, rather than each having a copy. In the same way, albiet more doubtfully, you might have global CSS (though that is a bit contrary to the idea of a subdomain in the first place), or a javascript that is commonly used. (more efficient than each having its copy and better for organization purposes). Finally, mabye you have a global 404 page. I think this might be the case where you have user-created subdomains (say bloggername.example.com), where example.com still has a default 404 when either a subdomain does not exist or page does not exists under a valid blogger. I am confused on what the directory structure for this should be. To summarize: Should and how it have a global files not in a subdirectory, how should www. be handled, (or how a now www or other subdomain should be handled), and the pattern for root/subdomain, as well as subdomain within subdomains (order-wise). Sorry this is multiple questions, but I feel at the root they are all related to the directory.

    Read the article

  • Practices for domain models in Javascript (with frameworks)

    - by AndyBursh
    This is a question I've to-and-fro'd with for a while, and searched for and found nothing on: what're the accepted practices surrounding duplicating domain models in Javascript for a web application, when using a framework like Backbone or Knockout? Given a web application of a non-trivial size with a set of domain models on the server side, should we duplicate these models in the web application (see the example at the bottom)? Or should we use the dynamic nature to load these models from the server? To my mind, the arguments for duplicating the models are in easing validation of fields, ensuring that fields that expected to be present are in fact present etc. My approach is to treat the client-side code like an almost separate application, doing trivial things itself and only relying on the server for data and complex operations (which require data the client-side doesn't have). I think treating the client-side code like this is akin to separation between entities from an ORM and the models used with the view in the UI layer: they may have the same fields and relate to the same domain concept, but they're distinct things. On the other hand, it seems to me that duplicating these models on the server side is a clear violation of DRY and likely to lead to differing results on the client- and server-side (where one piece gets updated but the other doesn't). To avoid this violation of DRY we can simply use Javascripts dynamism to get the field names and data from the server as and when they're neeed. So: are there any accepted guidelines around when (and when not) to repeat yourself in these situations? Or this a purely subjective thing, based on the project and developer(s)? Example Server-side model class M { int A DateTime B int C int D = (A*C) double SomeComplexCalculation = ServiceLayer.Call(); } Client-side model function M(){ this.A = ko.observable(); this.B = ko.observable(); this.C = ko.observable(); this.D = function() { return A() * C(); } this.SomeComplexCalculation = ko.observalbe(); return this; }l M.GetComplexValue = function(){ this.SomeComplexCalculation(Ajax.CallBackToServer()); }; I realise this question is quite similar to this one, but I think this is more about almost wholly untying the web application from the server, where that question is about doing this only in the case of complex calculation.

    Read the article

  • Why is Java the lingua franca at so many institutions?

    - by Billy ONeal
    EDIT: This question at first seems to be bashing Java, and I guess at this point it is a bit. However, the bigger point I am trying to make is why any one single language is chosen as the one end all be all solution to all problems. Java happens to be the one that's used so that's the one I had to beat on here, but I'm not intentionality ripping Java a new one :) I don't like Java in most academic settings. I'm not saying the language itself is bad -- it has several extremely desirable aspects, most importantly the ability to run without recompilation on most any platform. Nothing wrong with using the language for Your Next App ^TM. (Not something I would personally do, but that's more because I have less experience with it, rather than it's design being poor) I think it is a waste that high level CS courses are taught using Java as a language. Too many of my co-students cannot program worth a damn, because they don't know how to work in a non-garbage-collected world. They don't fundamentally understand the machines they are programming for. When someone can work outside of a garbage collected world, they can work inside of one, but not vice versa. GC is a tool, not a crutch. But the way it is used to teach computer science students is a as a crutch. Computer science should not teach an entire suite of courses tailored to a single language. Students leave with the idea that all good design is idiomatic Java design, and that Object Oriented Design is the ONE TRUE WAY THAT IS THE ONLY WAY THINGS CAN BE DONE. Other languages, at least one of them not being a garbage collected language, should be used in teaching, in order to give the graduate a better understanding of the machines. It is an embarrassment that somebody with a PHD in CS from a respected institution cannot program their way out of a paper bag. What's worse, is that when I talk to those CS professors who actually do understand how things operate, they share feelings like this, that we're doing a disservice to our students by doing everything in Java. (Note that the above would be the same if I replaced it with any other language, generally using a single language is the problem, not Java itself) In total, I feel I can no longer respect any kind of degree at all -- when I can't see those around me able to program their way out of fizzbuzz problems. Why/how did it get to be this way?

    Read the article

  • Why doesn't Ubuntu detect my second hard drive?

    - by user93179
    I am new to Linux and to Ubuntu, I was wondering, I have two hard drives setup in SATA ports (non-raid, at least I don't think they are). I installed ubuntu unto the drives fresh without any previous versions or windows at all. However when I got the Ubuntu 12.04 LTS working, all I see is 1 x 120 gigabyte harddrive. Also, not sure if this is important or not, my hard drives are SSD. My computer specs are Asus P9Z77-V-LK Nvidia Geforce GTX 660 TI Intel i5 3570k 3.4 /proc/partitions shows: major minor #blocks name 8 0 117220824 sda 8 1 117219328 sda1 8 16 117220824 sdb 8 17 96256 sdb1 8 18 108780544 sdb2 8 19 8342528 sdb3 11 0 1048575 sr0 and ls -l /sys/block/ | grep -v /virtual/: lrwxrwxrwx 1 root root 0 Sep 27 17:26 sda - ../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda lrwxrwxrwx 1 root root 0 Sep 27 17:26 sdb - ../devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sdb lrwxrwxrwx 1 root root 0 Sep 27 22:26 sdc - ../devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/host6/target6:0:0/6:0:0:0/block/sdc lrwxrwxrwx 1 root root 0 Sep 27 22:04 sr0 - ../devices/pci0000:00/0000:00:1f.2/host3/target3:0:0/3:0:0:0/block/sr0 sudo file -s /dev/sd*: /dev/sda: x86 boot sector; partition 1: ID=0x7, starthead 32, startsector 2048, 234438656 sectors, code offset 0xc0, OEM-ID " ?", Bytes/sector 190, sectors/cluster 124, reserved sectors 191, FATs 6, root entries 185, sectors 64514 (volumes 32 MB) , physical drive 0x7e, dos 32 MB) , FAT (32 bit), sectors/FAT 749, reserved3 0x800000, serial number 0x35361a2b, unlabeled /dev/sdb2: Linux rev 1.0 ext4 filesystem data, UUID=387761ac-5eba-4d0f-93ba-746a82fb541d (needs journal recovery) (extents) (large files) (huge files) /dev/sdb3: data /dev/sdc: x86 boot sector; partition 1: ID=0xc, active, starthead 0, startsector 8064, 30473088 sectors, code offset 0xc0 /dev/sdc1: x86 boot sector, code offset 0x58, OEM-ID "SYSLINUX", sectors/cluster 64, reserved sectors 944, Media descriptor 0xf8, heads 128, hidden sectors 8064, sectors 30473088 (volumes 32 MB) , FAT (32 bit), sectors/FAT 3720, Backup boot sector 8, serial number 0xf90c12e9, label: "KINGSTON " /dev/sda1: x86 boot sector, code offset 0x52, OEM-ID "NTFS ", sectors/cluster 8, reserved sectors 0, Media descriptor 0xf8, heads 255, hidden sectors 2048, dos 32 MB) , FAT (32 bit), sectors/FAT 749, reserved3 0x800000, serial number 0x35361a2b, unlabeled Any help would be greatly appreciated! Thanks Another thing I noticed is, when i use gparted to locate my drives, it seems that sda1 is my second drive that I am not detecting when I boot up and my ubuntu + FAT Boot files are installed in sdb1

    Read the article

  • Boot error aftter clean Ubuntu 13.04 install: [Reboot and select proper boot device]

    - by IcarusNM
    I am having the same problem as this guy where a fresh Ubuntu install completes beautifully but will not boot. I get the ASUS (?) "Reboot and select proper boot device" error, first with Xubuntu 13.10 and after finally giving up there, and Xubuntu 13.4, I am back to regular Ubuntu 13.4. ASUS motherboard Z77, Intel chipset. Standard internal SATA 500GB HD. 64-bit. All-new hardware less than 3 months old. It was running Ubuntu 12.04LTC great until I tried this upgrade. I have re-installed from scratch every which way: with LVM, without LVM; with the default partitions, with my own partitions. With ext3 or ext4. Alongside; replace; upgrade. No difference. On the last two tries, I have booted afterward from the same USB stick, downloaded and run boot-repair, and now I guess I am off to the boot-repair support email with my URLs from that. It did all kinds of cool stuff but ultimately made no difference. I never got anything like this with Ubuntu 12.04. I've now probably re-installed Ubuntu 13.04 ten times slightly different ways. I finally found how to skip the language packs, so at least that sped things up! :) This starts from the ubuntu-13.04-desktop-amd64.iso and UNetbootin as suggested on the official instructions for USB thumb drive creation from OSX. That part all works fine (booting the USB on the PC and trying Ubuntu and/or installing from there on the PC HD.) I have no CD drive on this PC, but I suppose I could get one. I would rather find some Linux install that works from USB like I've always done. After running boot-repair twice, in the ASUS BIOS I now see three different UEFI boot options in the priority list, and they are all labeled exactly the same: ubuntu (P6: WDC WD5000AAKX-00U6AA0) Then there's a non-UEFI option: P6: WDC WD5000AAKX-00U6AA0 (476940MB) And a fifth option appeared after the first boot-repair: Windows Boot Manager (P6: WDC WD5000AAKX-00U6AA0) I have tried all 5 of these, and I get exactly the same error. I have never had Windows installed on this HD. ASUS is calling it Windows Boot Manaer but I presume that's a mistaken label for whatever boot-repair did. I can boot on USB and run GParted and it looks great. The partitions all look normal. I found another case of this online with no solution posted. I can't find much about it online. Needs a Master Boot Record wipe/redo?? I'm not sure how.

    Read the article

  • Developing web sites that imitate desktop apps. How to fight that paradigm? [closed]

    - by user1598390
    Supposse there's a company where web sites/apps are designed to resemble desktop apps. They struggle to add: Splash screens Drop-down menus Tab-pages Pages that don't grow downward with content, context is inside scrollable area so page is of a fixed size, as if resembling the one-screen limitation of desktop apps. Modal windows, pop-ups, etc. Tree views Absolutely no access to content unless you login-first, even with non-sensitive content. After splash screen desapears, you are presented with a login screen. No links - just simulated buttons. Fixed page-size. Cannot open a linked in other tab Print button that prints directly ( not showing printable page so the user can't print via the browser's print command ) Progress bars for loading content even when the browser indicates it with its own animation Fonts and color amulate a desktop app made with Visual Basic, PowerBuilder etc. Every app seems almost as if were made in Visual Basic. They reject this elements: Breadcrumbs Good old underlined links Generated/dynamic navigation, usage-based suggestions Ability to open links in multiple tabs Pagination Printable pages Ability to produce a URL you can save or share that links to an item, like when you send someone the link to an especific StackExchange question. The only URL is the main one. Back button To achieve this, tons of javascript code is needed. Lots and lots of Javascript and Ajax code for things not related with the business but with the necessity to hide/show that button, refresh this listbox, grey-out that label, etc. The coplexity generated by forcing one paradigm into another means most lines of code are dedicated to maintain the illusion of a desktop app. What is the best way to change this mindset, and make them embrace the web, and start producing modern, web apps instead of desktop imitations ? EDIT: These sites are intranet sites. Users hate these apps. They constantly whine about them, but they have to use them to do their daily work. These sites are in-house solutions, the end-users have no choice but to use them. They are a "captive audience". Also, substitution will not happen because of high costs. But at least if that mindset is changed, new developments would be more web-like.

    Read the article

  • C Programming arrays, I dont understand how I would go about making this program, If anyone can just guide me through the basic outline please :) [on hold]

    - by Rashmi Kohli
    Problem The temperature of a car engine has been measured, from real-world experiments, as shown in the table and graph below: Time (min) Temperature (oC) 0 20 1 36 2 61 3 68 4 77 5 110 Use linear regression to find the engine’s temperature at 1.5 minutes, 4.3 minutes, and any other time specified by the user. Background In engineering, many times we measure several data points in an experiment, but then we need to predict a value that we have not measured which lies between two measured values, such as the problem statement above. If the relation between the measured parameters seems to be roughly linear, then we can use linear regression to find the relationship between those parameters. In the graph of the problem statement above, the relation seems to be roughly linear. Hence, we can apply linear regression to the above problem. Assuming y {y0, y1, …yn-1} has a linear relation with x {x0, x1, … xn-1}, we can say that: y = mx+b where m and b can be found with linear regression as follows: For the problem in this lab, using linear regression gives us the following line (in blue) compared to the measured curve (in red). As you can see, there is usually a difference between the measured values and the estimated (predicted) values. What linear regression does is to minimize those differences and still give us a straight line (blue). Other methods, such as non-linear regression, are also possible to achieve higher accuracy and better curve fitting. Requirements Your program should first print the table of the temperatures similar to the way it’s printed in the problem statement. It should then calculate the temperature at minute 1.5 and 4.3 and show the answers to the user. Next, it should prompt the user to enter a time in minutes (or -1 to quit), and after reading the user’s specified time it should give the value of the engine’s temperature at that time. It should then go back to the prompt. Hints •Use a one dimensional array to store the temperature values given in the problem statement. •Use functions to separate tasks such as calculating m, calculating b, calculating the temperature at a given time, printing the prompt, etc. You can then give your algorithm as well as you pseudo code per function, as opposed to one large algorithm diagram or one large sequence of pseudo code.

    Read the article

  • Multi-threaded JOGL Problem

    - by moeabdol
    I'm writing a simple OpenGL application in Java that implements the Monte Carlo method for estimating the value of PI. The method is pretty easy. Simply, you draw a circle inside a unit square and then plot random points over the scene. Now, for each point that is inside the circle you increment the counter for in points. After determining for all the random points wither they are inside the circle or not you divide the number of in points over the total number of points you have plotted all multiplied by 4 to get an estimation of PI. It goes something like this PI = (inPoints / totalPoints) * 4. This is because mathematically the ratio of a circle's area to a square's area is PI/4, so when we multiply it by 4 we get PI. My problem doesn't lie in the algorithm itself; however, I'm having problems trying to plot the points as they are being generated instead of just plotting everything at once when the program finishes executing. I want to give the application a sense of real-time display where the user would see the points as they are being plotted. I'm a beginner at OpenGL and I'm pretty sure there is a multi-threading feature built into it. Non the less, I tried to manually create my own thread. Each worker thread plots one point at a time. Following is the psudo-code: /* this part of the code exists in display() method in MyCanvas.java which extends GLCanvas and implements GLEventListener */ // main loop for(int i = 0; i < number_of_points; i++){ RandomGenerator random = new RandomGenerator(); float x = random.nextFloat(); float y = random.nextFloat(); Thread pointThread = new Thread(new PointThread(x, y)); } gl.glFlush(); /* this part of the code exists in run() method in PointThread.java which implements Runnable */ void run(){ try{ gl.glPushMatrix(); gl.glBegin(GL2.GL_POINTS); if(pointIsIn) gl.glColor3f(1.0f, 0.0f, 0.0f); // red point else gl.glColor3f(0.0f, 0.0f, 1.0f); // blue point gl.glVertex3f(x, y, 0.0f); // coordinates gl.glEnd(); gl.glPopMatrix(); }catch(Exception e){ } } I'm not sure if my approach to solving this issue is correct. I hope you guys can help me out. Thanks.

    Read the article

< Previous Page | 407 408 409 410 411 412 413 414 415 416 417 418  | Next Page >