Search Results

Search found 41305 results on 1653 pages for 'ubuntu studio'.

Page 412/1653 | < Previous Page | 408 409 410 411 412 413 414 415 416 417 418 419  | Next Page >

  • How to compile a C DLL for 64 bit with Visual Studio 2010?

    - by Daren Thomas
    I have a DLL written in C in source code. This is the code for the General Polygon Clipper (in case you are interested). I'm using it in a C# project via the C# wrapper provided on the homepage. This comes with a precompiled DLL. Since switching to a 64bit Development machine with Visual Studio 2010 and Windows 7 64 bit, the application won't run anymore. This is the error I get: An attempt was made to load a program with an incorrect format. This is because of DLLImporting the 32bit gpc.dll, as I have gathered from stuff found on the web. I assume this will all go away if I recompile the DLL to 64bit, but can't for the love of me figure out how to do so. My C skills are basic, in that I can write a C program with the GNU tools, but have no experience with various compilers / processors / IDEs etc. I believe I could port this to C#. By that I mean I trust myself to actually pull it off. But I'd prefer not to, since it is a lot of work that I'd prefer a compiler to do for me ;)

    Read the article

  • Why does the .NET tab in the 'Add Reference' dialog in Visual Studio not list the contents of the GA

    - by abroun
    Duplicate of: Getting assemblies to show in the .NET tab of Add Reference So, I'm using Visual C# 2008 Express Edition and I've just been on a bit of a detour as I found out that my assumption that the .NET tab of the 'Add Reference' dialog lists the contents of the GAC was incorrect. This was a bit of a problem for me as the assembly that I wanted to reference from my project was only available in the GAC. (It was Microsoft.XNA.Framework v2.0 obtained from the XNA 2.0 redistributalbe and as far as I could see it installed only into the GAC). I worked round the problem by setting the reference to Microsoft.XNA.Framework manually in the .csproj file and then getting a copy of the dll out of the cache. I was then able to create a directory for the DLL, add it to Visual Studio's list of assembly directories in the registry and then voila! I could see it in the .NET tab. This all seems like a bit of a faff to me and I don't think that my initial assumption (that the .NET tab shows the contents of the GAC) was that unreasonable or would be that uncommon. Can someone who knows more than me tell me why the contents of the GAC aren't shown? The documentation just says that they are not, but is there a good reason? is there actually a way to get the entire contents of the GAC to be listed? A tick box I've missed somewhere? Any info much appreciated.

    Read the article

  • What to use for version control with Visual Studio 2008 for inhouse projects?

    - by Boog
    We want to put a number of our in-house projects under version control. Our projects are C# .NET applications and assemblies. We originally decided to go Microsoft all the way (as is the norm around here), and tried installing Visual Studio Team Foundation Server. To say the least, it was way more trouble of trying to get a successful install than it's worth, and I'm afraid we don't have a entire server to dedicate to TFS itself, as the installer seems to insist. We also considered a generic solution like Subversion or CVS, or possibly some kind of free online hosting that doesn't make our source publicly available under some license like Google Code appears to. Does anyone have any suggestions for us that would best fit our in-house MS environment? We'd also get some benefit out of some kind of project management tools if they were nicely integrated in to the solution, but this would only be a perk. I should also mention that we haven't entirely ruled out TFS, but it's looking like a pain, so anything you guys have to say for or against it would be helpful.

    Read the article

  • How do I find and open a file in a Visual Studio 2005 add-in?

    - by Charles Randall
    I'm making an add-in with Visual Studio 2005 C# to help easily toggle between source and header files, as well as script files that all follow a similar naming structure. However, the directory structure has all of the files in different places, even though they are all in the same project. I've got almost all the pieces in place, but I can't figure out how to find and open a file in the solution based only on the file name alone. So I know I'm coming from, say, c:\code\project\subproject\src\blah.cpp, and I want to open c:\code\project\subproject\inc\blah.h, but I don't necessarily know where blah.h is. I could hardcode different directory paths but then the utility isn't generic enough to be robust. The solution has multiple projects, which seems to be a bit of a pain as well. I'm thinking at this point that I'll have to iterate through every project, and iterate through every project item, to see if the particular file is there, and then get a proper reference to it. But it seems to me there must be an easier way of doing this.

    Read the article

  • Visual Studio 2008 Unit test does not pick up code changes unless I build the entire solution

    - by Orion Edwards
    Here's the scenario: Change my code: Change my unit test for that code With the cursor inside the unit test class/method, invoke VS2008's "Run tests in current context" command The visual studio "Output" window indicates that the code dll and the test dll both successfully build (in that order) The problem is however, that the unit test does not use the latest version of the dll which it has just built. Instead, it uses the previously built dll (which doesn't have the updated code in it), so the test fails. When adding a new method, this results in a MethodNotImplementedException, and when adding a class, it results in a TypeLoadException, both because the unit test thinks the new code is there, and it isn't!. If I'm just updating an existing method, then the test just fails due to incorrect results. I can 'work around' the problem by doing this Change my code: Change my unit test for that code Invoke VS2008's 'Build Solution' command With the cursor inside the unit test class/method, invoke VS2008's "Run tests in current context" command The problem is that doing a full build solution (even though nothing has changed) takes upwards of 30 seconds, as I have approx 50 C# projects, and VS2008 is not smart enough to realize that only 2 of them need to be looked at. Having to wait 30 seconds just to change 1 line of code and re-run a unit test is abysmal. Is there anything I can do to fix this? None of my code is in the GAC or anything funny like that, it's just ordinary old dll's (buiding against .NET 3.5SP1 on a win7/64bit machine) Please help!

    Read the article

  • How do I run NUnit in debug mode from Visual Studio?

    - by Jon Cage
    I've recently been building a test framework for a bit of C# I've been working on. I have NUnit set up and a new project within my workspace to test the component. All works well if I load up my unit tests from Nunit (v2.4), but I've got to the point where it would be really useful to run in debug mode and set some break points. I've tried the suggestions from several guides which all suggest changing the 'Debug' properties of the test project: Start external program: C:\Program Files\NUnit 2.4.8\bin\nunit-console.exe Command line arguments: /assembly: <full-path-to-solution>\TestDSP\bin\Debug\TestDSP.dll I'm using the console version there, but have tried the calling the GUI as well. Both give me the same error when I try and start debugging: Cannot start test project 'TestDSP' because the project does not contain any tests. Is this because I normally load \DSP.nunit into the Nunit GUI and that's where the tests are held? I'm beginning to think the problem may be that VS wants to run it's own test framework and that's why it's failing to find the NUnit tests? [Edit] To those asking about test fixtures, one of my .cs files in the TestDSP project looks roughly like this: namespace Some.TestNamespace { // Testing framework includes using NUnit.Framework; [TestFixture] public class FirFilterTest { /// <summary> /// Tests that a FirFilter can be created /// </summary> [Test] public void Test01_ConstructorTest() { ...some tests... } } } ...I'm pretty new to C# and the Nunit test framework so it's entirely possible I've missed some crucial bit of information ;-) [FINAL SOLUTION] The big problem was the project I'd used. If you pick: Other Languages->Visual C#->Test->Test Project ...when you're choosing the project type, Visual Studio will try and use it's own testing framework as far as I can tell. You should pick a normal c# class library project instead and then the instructions in my selected answer will work.

    Read the article

  • Can I commit changes to actual database while debugging C# in Visual Studio?

    - by nathant23
    I am creating a C# application using Visual Studio that uses an SQLExpress database. When I hit f5 to debug the application and make changes to the database I believe what is happening is there is a copy of the database in the bin/debug folder that changes are being made to. However, when I stop the debugging and then hit f5 the next time a new copy of the database is being put in the bin/debug folder so that all the changes made the last time are gone. My question is: Is there a way that when I am debugging the application I can have it make changes to the actual database and those changes are actually saved or will it only make changes to the copy in the bin/debug folder (if that is what is actually happening)? I've seen similar questions, but I couldn't find an answer that said if it's possible to make those changes persistent in the actual .mdf file. The reason I ask is because as I build this application I am continuously adding pieces and testing to make sure they all work together. When I put in test data I am using actual data that I would like to stay in the database. This would just help me not have to reenter the data later. Thanks in advance for any help or information that could help me better understand the process.

    Read the article

  • How good idea is it to use code contracts in Visual Studio 2010 Professional (ie. no static checking

    - by Lasse V. Karlsen
    I create class libraries, some which are used by others around the world, and now that I'm starting to use Visual Studio 2010 I'm wondering how good idea it is for me to switch to using code contracts, instead of regular old-style if-statements. ie. instead of this: if (String.IsNullOrWhiteSpace(fileName)) throw new ArgumentNullException("fileName"); (yes, I know, if it is whitespace, it isn't strictly null) use this: Contract.Requires(!String.IsNullOrWhiteSpace(fileName)); The reason I'm asking is that I know that the static checker is not available to me, so I'm a bit nervous about some assumptions that I make, that the compiler cannot verify. This might lead to the class library not compiling for someone that downloads it, when they have the static checker. This, coupled with the fact that I cannot even reproduce the problem, would make it tiresome to fix, and I would gather that it doesn't speak volumes to the quality of my class library if it seemingly doesn't even compile out of the box. So I have a few questions: Is the static checker on by default if you have access to it? Or is there a setting I need to switch on in the class library (and since I don't have the static checker, I won't) Are my fears unwarranted? Is the above scenario a real problem? Any advice would be welcome.

    Read the article

  • Can Visual Studio (should it be able to) compute a diff between any two changesets associated with a

    - by Hamish Grubijan
    Here is my use case: I start on a project XYZ, for which I create a work item, and I make frequent check-ins, easily 10-20 in total. ALL of the code changes will be code-read and code-reviewed. The change sets are not consecutive - other people check-in in-between my changes, although they are very unlikely to touch the exact same files. So ... at the en of the project I am interested in a "total diff" - as if there was a single check-in by me to complete the entire project. In theory this is computable. From the list of change sets associated with the work item, you get the list of all files that were affected. Then, the algorithm can aggregate individual diffs over each file and combine them into one. It is possible that a pure total diff is uncomputable due to the fact that someone else renamed files, or changed stuff around very closely, or in the same functions as me. I that case ... I suppose a total diff can include those changes by non-me as well, and warn me about the fact. I would find this very useful, but I do not know how to do t in practice. Can Visual Studio 2008/2010 (and/or TFS server) do it? Are there other source control systems capable of doing this? Thanks.

    Read the article

  • How to save enum settings in Visual Studio project properties?

    - by zaidwaqi
    Hi, In the Settings tab in Visual Studio, I can see Name, Type, Scope, Value table. Define settings is intuitive if the data type is already within the Type drop-down list i.e. integer, string, long etc. But I can't find enum anywhere. How do I save enum settings then? For now, I have the following which clutter my code too much. public enum Action { LOCK = 9, FORCED_LOGOFF = 12, SHUTDOWN = 14, REBOOT, LOGOFF = FORCED_LOGOFF }; and I define Action as int in the setting. Then I have to do, switch (Properties.Settings.Default.Action) { case 9: SetAction(Action.LOCK); break; case 12: SetAction(Action.FORCED_LOGOFF); break; case 14: SetAction(Action.SHUTDOWN); break; case 15: SetAction(Action.REBOOT); break; default: SetAction(Action.LOCK); break; } Would be nice if I could simply do something like SetAction(Properties.Settings.Default.Action); to replace all above but I dont know how to save enum in setting. Hope my question is clear. Thanks.

    Read the article

  • zend studio 5.5.1 on windows xp - won't open!

    - by esther h
    I have been using zend studio 5.5.1 for the last year and and a half (on windows xp), with some occasional issues, such as a blank error dialog box when I started the program, but always went away when i restarted my computer, and usually got messages about javaw.exe errors. But now, the program does not open at all. What happens is, I get a little dialog that says Loading project - this is normal... but then, nothing. The zend program item is sitting in the taskbar, but when i click on it - nothing! there is nothing to show. i can right click and press close, but that is all. restarting computer did not help. i just uninstalled it, downloaded again from zend website, and reinstalled. tried opening - get loading box, seems to have loaded, even got tip of the day box. but there is nothing showing behind them. once i closed the tip box, i dont have any indication that zend is open besides the program item in the taskbar. windows task manager says it is running... anyone have a clue? help!!! thanks

    Read the article

  • The Windows Store... why did I sign up with this mess again?

    - by FransBouma
    Yesterday, Microsoft revealed that the Windows Store is now open to all developers in a wide range of countries and locations. For the people who think "wtf is the 'Windows Store'?", it's the central place where Windows 8 users will be able to find, download and purchase applications (or as we now have to say to not look like a computer illiterate: <accent style="Kentucky">aaaaappss</accent>) for Windows 8. As this is the store which is integrated into Windows 8, it's an interesting place for ISVs, as potential customers might very well look there first. This of course isn't true for all kinds of software, and developer tools in general aren't the kind of applications most users will download from the Windows store, but a presence there can't hurt. Now, this Windows Store hosts two kinds of applications: 'Metro-style' applications and 'Desktop' applications. The 'Metro-style' applications are applications created for the new 'Metro' UI which is present on Windows 8 desktop and Windows RT (the single color/big font fingerpaint-oriented UI). 'Desktop' applications are the applications we all run and use on Windows today. Our software are desktop applications. The Windows Store hosts all Metro-style applications locally in the store and handles the payment for these applications. This means you upload your application (sorry, 'app') to the store, jump through a lot of hoops, Microsoft verifies that your application is not violating a tremendous long list of rules and after everything is OK, it's published and hopefully you get customers and thus earn money. Money which Microsoft will pay you on a regular basis after customers buy your application. Desktop applications are not following this path however. Desktop applications aren't hosted by the Windows Store. Instead, the Windows Store more or less hosts a page with the application's information and where to get the goods. I.o.w.: it's nothing more than a product's Facebook page. Microsoft will simply redirect a visitor of the Windows Store to your website and the visitor will then use your site's system to purchase and download the application. This last bit of information is very important. So, this morning I started with fresh energy to register our company 'Solutions Design bv' at the Windows Store and our two applications, LLBLGen Pro and ORM Profiler. First I went to the Windows Store dashboard page. If you don't have an account, you have to log in or sign up if you don't have a live account. I signed in with my live account. After that, it greeted me with a page where I had to fill in a code which was mailed to me. My local mail server polls every several minutes for email so I had to kick it to get it immediately. I grabbed the code from the email and I was presented with a multi-step process to register myself as a company or as an individual. In red I was warned that this choice was permanent and not changeable. I chuckled: Microsoft apparently stores its data on paper, not in digital form. I chose 'company' and was presented with a lengthy form to fill out. On the form there were two strange remarks: Per company there can just be 1 (one, uno, not zero, not two or more) registered developer, and only that developer is able to upload stuff to the store. I have no idea how this works with large companies, oh the overhead nightmares... "Sorry, but John, our registered developer with the Windows Store is on holiday for 3 months, backpacking through Australia, no, he's not reachable at this point. M'yeah, sorry bud. Hey, did you fill in those TPS reports yesterday?" A separate Approver has to be specified, which has to be a different person than the registered developer. Apparently to Microsoft a company with just 1 person is not a company. Luckily we're with two people! *pfew*, dodged that one, otherwise I would be stuck forever: the choice I already made was not reversible! After I had filled out the form and it was all well and good and accepted by the Microsoft lackey who had to write it all down in some paper notebook ("Hey, be warned! It's a permanent choice! Written down in ink, can't be changed!"), I was presented with the question how I wanted to pay for all this. "Pay for what?" I wondered. Must be the paper they were scribbling the information on, I concluded. After all, there's a financial crisis going on! How could I forget! Silly me. "Ok fair enough". The price was 75 Euros, not the end of the world. I could only pay by credit card, so it was accepted quickly. Or so I thought. You see, Microsoft has a different idea about CC payments. In the normal world, you type in your CC number, some date, a name and a security code and that's it. But Microsoft wants to verify this even more. They want to make a verification purchase of a very small amount and are doing that with a special code in the description. You then have to type in that code in a special form in the Windows Store dashboard and after that you're verified. Of course they'll refund the small amount they pull from your card. Sounds simple, right? Well... no. The problem starts with the fact that I can't see the CC activity on some website: I have a bank issued CC card. I get the CC activity once a month on a piece of paper sent to me. The bank's online website doesn't show them. So it's possible I have to wait for this code till October 12th. One month. "So what, I'm not going to use it anyway, Desktop applications don't use the payment system", I thought. "Haha, you're so naive, dear developer!" Microsoft won't allow you to publish any applications till this verification is done. So no application publishing for a month. Wouldn't it be nice if things were, you know, digital, so things got done instantly? But of course, that lackey who scribbled everything in the Big Windows Store Registration Book isn't that quick. Can't blame him though. He's just doing his job. Now, after the payment was done, I was presented with a page which tells me Microsoft is going to use a third party company called 'Symantec', which will verify my identity again. The page explains to me that this could be done through email or phone and that they'll contact the Approver to verify my identity. "Phone?", I thought... that's a little drastic for a developer account to publish a single page of information about an external hosted software product, isn't it? On Facebook I just added a page, done. And paying you, Microsoft, took less information: you were happy to take my money before my identity was even 'verified' by this 3rd party's minions! "Double standards!", I roared. No-one cared. But it's the thought of getting it off your chest, you know. Luckily for me, everyone at Symantec was asleep when I was registering so they went for the fallback option in case phone calls were not possible: my Approver received an email. Imagine you have to explain the idiot web of security theater I was caught in to someone else who then has to reply a random person over the internet that I indeed was who I said I was. As she's a true sweetheart, she gave me the benefit of the doubt and assured that for now, I was who I said I was. Remember, this is for a desktop application, which is only a link to a website, some pictures and a piece of text. No file hosting, no payment processing, nothing, just a single page. Yeah, I also thought I was crazy. But we're not at the end of this quest yet. I clicked around in the confusing menus of the Windows Store dashboard and found the 'Desktop' section. I get a helpful screen with a warning in red that it can't find any certified 'apps'. True, I'm just getting started, buddy. I see a link: "Check the Windows apps you submitted for certification". Well, I haven't submitted anything, but let's see where it brings me. Oh the thrill of adventure! I click the link and I end up on this site: the hardware/desktop dashboard account registration. "Erm... but I just registered...", I mumbled to no-one in particular. Apparently for desktop registration / verification I have to register again, it tells me. But not only that, the desktop application has to be signed with a certificate. And not just some random el-cheapo certificate you can get at any mall's discount store. No, this certificate is special. It's precious. This certificate, the 'Microsoft Authenticode' Digital Certificate, is the only certificate that's acceptable, and jolly, it can be purchased from VeriSign for the price of only ... $99.-, but be quick, because this is a limited time offer! After that it's, I kid you not, $499.-. 500 dollars for a certificate to sign an executable. But, I do feel special, I got a special price. Only for me! I'm glowing. Not for long though. Here I started to wonder, what the benefit of it all was. I now again had to pay money for a shiny certificate which will add 'Solutions Design bv' to our installer as the publisher instead of 'unknown', while our customers download the file from our website. Not only that, but this was all about a Desktop application, which wasn't hosted by Microsoft. They only link to it. And make no mistake. These prices aren't single payments. Every year these have to be renewed. Like a membership of an exclusive club: you're special and privileged, but only if you cough up the dough. To give you an example how silly this all is: I added LLBLGen Pro and ORM Profiler to the Visual Studio Gallery some time ago. It's the same thing: it's a central place where one can find software which adds to / extends / works with Visual Studio. I could simply create the pages, add the information and they show up inside Visual Studio. No files are hosted at Microsoft, they're downloaded from our website. Exactly the same system. As I have to wait for the CC transcripts to arrive anyway, I can't proceed with publishing in this new shiny store. After the verification is complete I have to wait for verification of my software by Microsoft. Even Desktop applications need to be verified using a long list of rules which are mainly focused on Metro-style applications. Even while they're not hosted by Microsoft. I wonder what they'll find. "Your application wasn't approved. It violates rule 14 X sub D: it provides more value than our own competing framework". While I was writing this post, I tried to check something in the Windows Store Dashboard, to see whether I remembered it correctly. I was presented again with the question, after logging in with my live account, to enter the code that was just mailed to me. Not the previous code, a brand new one. Again I had to kick my mail server to pull the email to proceed. This was it. This 'experience' is so beyond miserable, I'm afraid I have to say goodbye for now to the 'Windows Store'. It's simply not worth my time. Now, about live accounts. You might know this: live accounts are tied to everything you do with Microsoft. So if you have an MSDN subscription, e.g. the one which costs over $5000.-, it's tied to this same live account. But the fun thing is, you can login with your live account to the MSDN subscriptions with just the account id and password. No additional code is mailed to you. While it gives you access to all Microsoft software available, including your licenses. Why the draconian security theater with this Windows Store, while all I want is to publish some desktop applications while on other Microsoft sites it's OK to simply sign in with your live account: no codes needed, no verification and no certificates? Microsoft, one thing you need with this store and that's: apps. Apps, apps, apps, apps, aaaaaaaaapps. Sorry, my bad, got carried away. I just can't stand the word 'app'. This store's shelves have to be filled to the brim with goods. But instead of being welcomed into the store with open arms, I have to fight an uphill battle with an endless list of rules and bullshit to earn the privilege to publish in this shiny store. As if I have to be thrilled to be one of the exclusive club called 'Windows Store Publishers'. As if Microsoft doesn't want it to succeed. Craig Stuntz sent me a link to an old blog post of his regarding code signing and uploading to Microsoft's old mobile store from back in the WinMo5 days: http://blogs.teamb.com/craigstuntz/2006/10/11/28357/. Good read and good background info about how little things changed over the years. I hope this helps Microsoft make things more clearer and smoother and also helps ISVs with their decision whether to go with the Windows Store scheme or ignore it. For now, I don't see the advantage of publishing there, especially not with the nonsense rules Microsoft cooked up. Perhaps it changes in the future, who knows.

    Read the article

  • Dual booting 12.10 and Win 7 - boots directly to Win 7

    - by user110174
    and thank you kindly for you help! I'll preface this with saying that I realize this is a common problem, with lots of trouble-shooting guides available online; however, after multiple attempts with different guides, I've made zero progress and am hoping to someone could help me with my specific scenario. First, my story: -Initially, I installed Ubuntu 12.10 with the "Something Else" option with no problems. Used 4 GB Swap Logical Partition, 26 GB Primary Root Partition. Wanting to trying out Mint 13, I booted into Windows from GRUB2, used the latest version of EasyBCD (v2.2) to restore the Windows 7 bootloader to the MBR, deleted the Ubuntu partitions, reformatted them in NTFS. I then created a 30 GB partition of free space for Mint. I installed Mint using the same partitioning described above for Ubuntu 12.10, using /dev/sda for the boot installation files, and everything seemed to go well, until I re-booted my computer and it went straight to Windows - I could find no way to get into Mint. So I went into windows, restored windows bootloader to the MBR w/ EasyBCD, deleted partitions, etc., as I figured I'd done enough messing around and would go with Ubuntu 12.10. Now the problem: I restarted my computer booting from the same Ubuntu USB key I originally used. Briefly, "error: "prefix" is not set" flashed on screen, and instead of being greeted with the GUI menu of "try vs. install Ubuntu", there was a menu with minimal graphics (like a BIOS menu) where I could select install, run from USB, etc. After selecting "Install Ubuntu", the familiar install wizard with a GUI came up, I partitioned my drive as described, /dev/sda for the boot installation files, install went well, rebooted and...straight to Windows. This is where I'm at. Fixes I've tried: -This guide: How can I repair grub? (How to get Ubuntu back after installing Windows?) to ensure Grub is on the MBR. I followed all steps, but still when I reboot, I go directly into Windows. -Installing 12.04 instead of 12.10 - same issue -Re-installed Ubuntu, writing the boot files to their own partition, then using EasyBCD to to add a boot option for Ubuntu using the Windows bootloader, ensuring I instruct EasyBCD to look at the partition I created with the Ubuntu installer (instructions here http://neosmart.net/wiki/display/EBCD/Ubuntu). When I reboot, I select the Ubuntu option, and it puts me in GRUB4DOS, with a cursor waiting for input. I have no idea what to put here, so I would just type "reboot" to exit out. And this is where I am now. Any clue as to why I can't boot into Ubuntu? My computer specs are: ASUS UX31A Core i7, Win 7 64 Pro, 256 GB SSD, Intel HM76 Chipset and Integrated Intel HD 4000 Graphics, 4 GB memory I've tried to be as clear as possible, but I'd be happy to provide any info that would help anyone along. Thanks for your patience in reading this! Sincerely, -MN

    Read the article

  • apt-get upgrade stuck at the same package (openjdk-6-jre-headless)

    - by decibyte
    I'm stuck, can't upgrade my system. Running sudo apt-get upgrade gives me the following: mmm@alalunga:~$ sudo apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done The following packages have been kept back: ginn libgrip0 linux-generic-pae linux-headers-generic-pae linux-image-generic-pae The following packages will be upgraded: apport apport-gtk bind9-host build-essential dhcp3-client dhcp3-common dnsutils eog evince evince-common firefox firefox-branding firefox-dbg firefox-globalmenu firefox-gnome-support firefox-locale-en gimp gimp-data gir1.2-totem-1.0 glib-networking glib-networking-common glib-networking-services gnupg gpgv icedtea-6-jre-cacao icedtea-6-jre-jamvm icedtea-6-plugin icedtea-netx icedtea-netx-common icedtea-plugin isc-dhcp-client isc-dhcp-common libapache2-mod-php5 libart-2.0-2 libbind9-80 libdns81 libevince3-3 libgimp2.0 libisc83 libisccc80 libisccfg82 liblwres80 libssl-dev libssl-doc libssl1.0.0 libtotem0 linux-firmware linux-libc-dev openjdk-6-jre openjdk-6-jre-headless openjdk-6-jre-lib openssl php-pear php5-cli php5-common php5-curl php5-dev php5-gd php5-mysql php5-xsl policykit-1-gnome python-apport python-django python-gst0.10 python-problem-report resolvconf thunderbird thunderbird-globalmenu thunderbird-gnome-support totem totem-common totem-mozilla totem-plugins xserver-xorg-input-synaptics 74 upgraded, 0 newly installed, 0 to remove and 5 not upgraded. Need to get 317 MB/327 MB of archives. After this operation, 1.481 kB of additional disk space will be used. Do you want to continue [Y/n]? Get:1 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] Get:2 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] Get:3 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] Get:4 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] Get:5 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] Get:6 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] Get:7 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] 9% [7 openjdk-6-jre-headless 27,3 MB/27,3 MB 100%] It keeps downloading the package openjdk-6-jre-headless, then does nothing for a while (hanging on what's the last line above), then download the package again. It's at its 13th download attempt at the moment of writing. The actual downloads seem to be done just fine, but whatever it does after downloading seems to be failing. I tried removing openjdk-6, but then it wanted to install openjdk-7 instead, with the same result, hanging at openjdk-7-jre-headless instead. I also tried changing servers from my local (Danish) to the main server. No luck. It's also keeping me from upgrading alle the other packages. What to do?

    Read the article

  • problems in fetching upgrades

    - by andre
    presently using ubuntu 10.04 and I would like to upgrade to the latest ubuntu release but while trying to ugrade I have this errors . Can anybody help me how to solve this and proceed..just a beginner in using ubuntu. thanks W: Failed to fetch http://security.ubuntu.com/ubuntu/pool/main/l/linux-meta/linux-image-generic_2.6.32.38.44_i386.deb 404 Not Found [IP: 91.189.92.166 80] W: Failed to fetch http://security.ubuntu.com/ubuntu/pool/main/l/linux-meta/linux-headers-generic_2.6.32.38.44_i386.deb 404 Not Found [IP: 91.189.92.166 80]

    Read the article

  • How can I prevent external MSBuild files from being cached (by Visual Studio) during a project build

    - by Damian Powell
    I have a project in my solution which started life as a C# library project. It's got nothing of any interest in it in terms of code, it is merely used as a dependency in the other projects in my solution in order to ensure that it is built first. One of the side-effects of building this project is that a shared AssemblyInfo.cs is created which contains the version number in use by the other projects. I have done this by adding the following to the .csproj file: <ItemGroup> <None Include="Properties\AssemblyInfo.Shared.cs.in" /> <Compile Include="Properties\AssemblyInfo.Shared.cs" /> <None Include="VersionInfo.targets" /> </ItemGroup> <Import Project="$(ProjectDir)VersionInfo.targets" /> <Target Name="BeforeBuild" DependsOnTargets="UpdateSharedAssemblyInfo" /> The referenced file, VersionInfo.targets, contains the following: <Project ToolsVersion="4.0" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003"> <PropertyGroup> <!-- Some properties defining tool locations and the name of the AssemblyInfo.Shared.cs.in file etc. --> </PropertyGroup> <Target Name="UpdateSharedAssemblyInfo"> <!-- Uses the Exec task to run one of the tools to generate AssemblyInfo.Shared.cs based on the location of AssemblyInfo.Shared.cs.in and some of the other properties. --> </Target> </Project> The contents of the VersionInfo.targets file could simply be embedded within the .csproj file but it is external because I am trying to turn all of this into a project template. I want the users of the template to be able to add the new project to the solution, edit the VersionInfo.targets file, and run the build. The problem is that modifying and saving the VersionInfo.targets file and rebuilding the solution has no effect - the project file uses the values from the .targets file as they were when the project was opened. Even unloading and reloading the project has no effect. In order to get the new values, I need to close Visual Studio and reopen it (or reload the solution). How can I set this up so that the configuration is external to the .csproj file and not cached between builds?

    Read the article

  • Deploy ASP.NET Web Applications with Web Deployment Projects

    - by Ben Griswold
    One may quickly build and deploy an ASP.NET web application via the Publish option in Visual Studio.  This option works great for most simple deployment scenarios but it won’t always cut it.  Let’s say you need to automate your deployments. Or you have environment-specific configuration settings. Or you need to execute pre/post build operations when you do your builds.  If so, you should consider using Web Deployment Projects. The Web Deployment Project type doesn’t come out-of-the-box with Visual Studio 2008.  You’ll need to Download Visual Studio® 2008 Web Deployment Projects – RTW and install if you want to follow along with this tutorial. I’ve created a shiny new ASP.NET MVC project.  Web Deployment Projects work with websites, web applications and MVC projects so feel free to go with any web project type you’d like.  Once your web application is in place, it’s time to add the Web Deployment project.  You can hunt and peck around the File > New > New Project… dialogue as long as you’d like, but you aren’t going to find what you need.  Instead, select the web project and then choose the “Add Web Deployment Project…” hiding behind the Build menu option. I prefer to name my projects based on the environment in which I plan to deploy.  In this case, I’ll be rolling to the QA machine. Don’t expect too much to happen at this point.  A seemingly empty project with a funny icon will be added to your solution.  That’s it. I want to take a minute and talk about configuration settings before we continue.  Some of the common settings which might change from environment to environment are appSettings, connectionStrings and mailSettings.  Here’s a look at my updated web.config: <appSettings>   <add key="MvcApplication293.Url" value="http://localhost:50596/" />     </appSettings> <connectionStrings>   <add name="ApplicationServices"        connectionString="data source=.\SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true"        providerName="System.Data.SqlClient"/> </connectionStrings>   <system.net>   <mailSettings>     <smtp from="[email protected]">         <network host="server.com" userName="username" password="password" port="587" defaultCredentials="false"/>     </smtp>   </mailSettings> </system.net> I want to update these values prior to deploying to the QA environment.  There are variations to this approach, but I like to maintain environment-specific settings for each of the web.config sections in the Config/[Environment] project folders.  I’ve provided a screenshot of the QA environment settings below. It may be obvious what one should include in each of the three files.  Basically, it is a copy of the associated web.config section with updated setting values.  For example, the AppSettings.config file may include a reference to the QA web url, the DB.config would include the QA database server and login information and the StmpSettings.config would include a QA Stmp server and user information. <?xml version="1.0" encoding="utf-8" ?> <appSettings>   <add key="MvcApplication293.Url" value="http://qa.MvcApplicatinon293.com/" /> </appSettings> AppSettings.config  <?xml version="1.0" encoding="utf-8" ?> <connectionStrings>   <add name="ApplicationServices"        connectionString="server=QAServer;integrated security=SSPI;database=MvcApplication293"        providerName="System.Data.SqlClient"/>   </connectionStrings> Db.config  <?xml version="1.0" encoding="utf-8" ?> <smtp from="[email protected]">     <network host="qaserver.com" userName="qausername" password="qapassword" port="587" defaultCredentials="false"/> </smtp> SmtpSettings.config  I think our web project is ready to deploy.  Now, it’s time to concentrate on the Web Deployment Project itself.  Right-click on the project file and open the Property Pages. The first thing to call out is the Configuration dropdown.  I only deploy a project which is built in Release Mode so I only setup the Web Deployment Project for this mode.  (This is when you change the Configuration selection to “Release.”)  I typically keep the Output Folder default value – .\Release\.  When the application is built, all artifacts will be dropped in the .\Release\ folder relative to the Web Deployment Project root.  The final option may be up for some debate.  I like to roll out updatable websites so I select the “Allow this precompiled site to be updatable” option.  I really do like to follow standard SDLC processes when I release my software but there are those times when you just have to make a hotfix to production and I like to keep this option open if need be.  If you are strongly opposed to this idea, please, by all means, don’t check the box. The next tab is boring.  I don’t like to deploy a crazy number of DLLs so I merge all outputs to a single assembly.  Again, you may have another option and feel free to change this selection if you so wish. If you follow my lead, take care when choosing a single assembly name.  The Assembly Name can not be the same as the website or any other project in your solution otherwise you’ll receive a circular reference build error.  In other words, I can’t name the assembly MvcApplication293 or my output window would start yelling at me. Remember when we called out our QA configuration files?  Click on the Deployment tab and you’ll see how where going to use them.  Notice the Web.config file section replacements value.  All this does is swap called out web.config sections with the content of the Config\QA\* files.  You can reduce or extend this list as you deem fit.  Did you see the “Use external configuration source file” option?  You know how you can point any of your web.config sections to an external file via the configSource attribute?  This option allows you to leverage that technique and instead of replacing the content of the sections, you will replace the configSource attribute value instead. <appSettings configSource="Config\QA\AppSettings.config" /> Go ahead and Apply your changes.  I’d like to take a look at the project file we just updated.  Right-click on the Web Deployment Project and select “Open Project File.” One of the first configuration blocks reflects core Release build settings.  There are a couple of points I’d like to call out here: DebugSymbols=false ensures the compilation debug attribute in your web.config is flipped to false as part of build process.  There’s some crumby (more likely old) documentation which implies you need a ToggleDebugCompilation task to make this happen.  Nope. Just make sure the DebugSymbols is set to false.  EnableUpdateable implies a single dll for the web application rather than a dll for each object and and empty view file. I think updatable applications are cleaner and include the benefit (or risk based on your perspective) that portions of the application can be updated directly on the server.  I called this out earlier but I wanted to reiterate. <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">     <DebugSymbols>false</DebugSymbols>     <OutputPath>.\Release</OutputPath>     <EnableUpdateable>true</EnableUpdateable>     <UseMerge>true</UseMerge>     <SingleAssemblyName>MvcApplication293</SingleAssemblyName>     <DeleteAppCodeCompiledFiles>true</DeleteAppCodeCompiledFiles>     <UseWebConfigReplacement>true</UseWebConfigReplacement>     <ValidateWebConfigReplacement>true</ValidateWebConfigReplacement>     <DeleteAppDataFolder>true</DeleteAppDataFolder>   </PropertyGroup> The next section is self-explanatory.  The content merely reflects the replacement value you provided via the Property Pages. <ItemGroup Condition="'$(Configuration)|$(Platform)' == 'Release|AnyCPU'">     <WebConfigReplacementFiles Include="Config\QA\AppSettings.config">       <Section>appSettings</Section>     </WebConfigReplacementFiles>     <WebConfigReplacementFiles Include="Config\QA\Db.config">       <Section>connectionStrings</Section>     </WebConfigReplacementFiles>     <WebConfigReplacementFiles Include="Config\QA\SmtpSettings.config">       <Section>system.net/mailSettings/smtp</Section>     </WebConfigReplacementFiles>   </ItemGroup> You’ll want to extend the ItemGroup section to include the files you wish to exclude from the build.  The sample ExcludeFromBuild nodes exclude all obj, svn, csproj, user, pdb artifacts from the build. Enough though they files aren’t included in your web project, you’ll need to exclude them or they’ll show up along with required deployment artifacts.  <ItemGroup Condition="'$(Configuration)|$(Platform)' == 'Release|AnyCPU'">     <WebConfigReplacementFiles Include="Config\QA\AppSettings.config">       <Section>appSettings</Section>     </WebConfigReplacementFiles>     <WebConfigReplacementFiles Include="Config\QA\Db.config">       <Section>connectionStrings</Section>     </WebConfigReplacementFiles>     <WebConfigReplacementFiles Include="Config\QA\SmtpSettings.config">       <Section>system.net/mailSettings/smtp</Section>     </WebConfigReplacementFiles>     <ExcludeFromBuild Include="$(SourceWebPhysicalPath)\obj\**\*.*" />     <ExcludeFromBuild Include="$(SourceWebPhysicalPath)\**\.svn\**\*.*" />     <ExcludeFromBuild Include="$(SourceWebPhysicalPath)\**\.svn\**\*" />     <ExcludeFromBuild Include="$(SourceWebPhysicalPath)\**\*.csproj" />     <ExcludeFromBuild Include="$(SourceWebPhysicalPath)\**\*.user" />     <ExcludeFromBuild Include="$(SourceWebPhysicalPath)\bin\*.pdb" />     <ExcludeFromBuild Include="$(SourceWebPhysicalPath)\Notes.txt" />   </ItemGroup> Pre/post build and Pre/post merge tasks are added to the final code block.  By default, your project file should look like the following – a completely commented out section. <!– To modify your build process, add your task inside one of        the targets below and uncomment it. Other similar extension        points exist, see Microsoft.WebDeployment.targets.   <Target Name="BeforeBuild">   </Target>   <Target Name="BeforeMerge">   </Target>   <Target Name="AfterMerge">   </Target>   <Target Name="AfterBuild">   </Target>   –> Update the section to remove all temporary Config folders and files after the build.  <!– To modify your build process, add your task inside one of        the targets below and uncomment it. Other similar extension        points exist, see Microsoft.WebDeployment.targets.     <Target Name="BeforeMerge">   </Target>   <Target Name="AfterMerge">   </Target>     <Target Name="BeforeBuild">      </Target>       –>   <Target Name="AfterBuild">     <!– WebConfigReplacement requires the Config files. Remove after build. –>     <RemoveDir Directories="$(OutputPath)\Config" />   </Target> That’s it for setup.  Save the project file, flip the solution to Release Mode and build.  If there’s an issue, consult the Output window for details.  If all went well, you will find your deployment artifacts in your Web Deployment Project folder like so. Both the code source and published application will be there. Inside the Release folder you will find your “published files” and you’ll notice the Config folder is no where to be found.  In the Source folder, all project files are found with the exception of the items which were excluded from the build. I’ll wrap up this tutorial by calling out a little Web Deployment pet peeve of mine: there doesn’t appear to be a way to add an existing web deployment project to a solution.  The best I can come up with is create a new web deployment project and then copy and paste the contents of the existing project file into the new project file.  It’s not a big deal but it bugs me. Download the Solution

    Read the article

  • How To Make NVIDIA’s Optimus Work on Linux

    - by Chris Hoffman
    Many new laptops come with NVIDIA’s Optimus technology – the laptop includes both a discrete NVIDIA GPU for gaming power and an onboard Intel GPU for power savings. The notebook switches between the two when necessary. However, this isn’t yet well-supported on Linux. Linus Torvalds had some choice words for NVIDIA regarding Optimus not working on Linux, and NVIDIA is now currently working on official support. However, if you have a laptop with Optimus support, you don’t have to wait for NVIDIA — you can use the Bumblebee project’s solution to enable Optimus on Linux today. Image Credit: Jemimus on Flickr How To Create a Customized Windows 7 Installation Disc With Integrated Updates How to Get Pro Features in Windows Home Versions with Third Party Tools HTG Explains: Is ReadyBoost Worth Using?

    Read the article

  • TFS 2010 and the missing Area & Iterations (stale data) Issue

    - by andresv
    The symptom is this: you change some area or iteration in a TFS Project, but the change is not reflected (or updated) in VS or any other TFS Client. Well, it happens that TFS now has some clever caching mechanisms that need to be updated when you make a change like this, and those changes are propagated by some scheduled jobs TFS is continuously running in the Application Tier.  So, you you get this behavior, please check (and possibly restart) the "Visual Studio Team Foundation Background Job Agent" service. In my case, this service was logging a very odd "Object Reference Not Set" into the Windows Event Log, and a simple restart fixed it. Hope this is fixed by RTM...   (we are using the RC version). And by the way, if the job agent is broken there are some other things that stops working like email notifications. Best regards, Andrés G Vettori, CTO, VMBC  

    Read the article

  • SQL Server 2008: Can't connect to remote server via management studio but can telnet in fine

    - by WarpKid
    Hi, I am in the process of trying to configure SQL Server 2008 to accept remote connections. I have been through all the documentation I can find and yet when I attempt to connect through management studio I get an error stating that the server could not be found. Interestingly I can connect through telnet to the remote server via the port that sql server is listening on. In the SQL Server logs I can see the connection attempt. So SQL Server is up and running and listening on the correct port - no firewall blocking it. It would appear that by default SQL Server is listening on port 50314 by default but management studio attempts to connect on port 1433.Weird. Server Management Studio = no dice. Anyone got any ideas? Server is set to allow remote connections - TCP IP is enabled, firewall is off. Thanks UPDATE FOR TO CLEAR THINGS UP A BIT We are seeing the connection attempt when we telnet in on port 50314 in the sql server logs. When we login through management studio we see it attempting connection on port 1433. There is no sign of this connection attempt in the logs.

    Read the article

  • Huawei E170 on Linux?

    - by torbengb
    Related to this question, I need to know if the specific combination of Ubuntu 9.10 + the Huawei E170 (HSDPA broadband modem USB stick) will work? Bonus points for a link to a webpage that decsribes exactly how it is done! Specifically, I'm in Austria and the telco is A1, but I hope that the setup would be the same regardless of location/provider. I have found these two pages that seem horribly complicated to a Linux noob. Is there a simpler way, or do I really need to dive into that? Your input is much appreciated! If I can get confirmation that it's supported, then I'd switch to Ubuntu Netbook Remix, because I'm already running Ubuntu on the main pc at home and I'd like to keep things simple.

    Read the article

  • How to Change Ubuntu’s Window Borders with Emerald

    - by The Geek
    The look of your operating system is all about the panels and the window borders, so now that we’ve shown you how to customize your panels, it’s time to customize the window borders to make Ubuntu look the way you want it to. For the purposes of this article, we’re going to assume that you’ve got the Compiz compositing window manager running—which is what provides the custom window effects found in Ubuntu. This means the technique probably won’t work in a virtual machine, or a really old PC. This is the third installment of our series on customizing Ubuntu by geeky reader Omar Hafiz—be sure and check out the first article, where he explained how to make your panels transparent, and the second article, where he explained how to customize the fonts and colors of those panels Latest Features How-To Geek ETC How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) How To Remove People and Objects From Photographs In Photoshop Ask How-To Geek: How Can I Monitor My Bandwidth Usage? Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Never Call Me at Work [Humorous Star Wars Video] Add an Image Properties Listing to the Context Menu in Chrome and Iron Add an Easy to View Notification Badge to Tabs in Firefox SpellBook Parks Bookmarklets in Chrome’s Context Menu Drag2Up Brings Multi-Source Drag and Drop Uploading to Firefox Enchanted Swing in the Forest Wallpaper

    Read the article

  • Multiple file upload with asp.net 4.5 and Visual Studio 2012

    - by Jalpesh P. Vadgama
    This post will be part of Visual Studio 2012 feature series. In earlier version of ASP.NET there is no way to upload multiple files at same time. We need to use third party control or we need to create custom control for that. But with asp.net 4.5 now its possible to upload multiple file with file upload control. With ASP.NET 4.5 version Microsoft has enhanced file upload control to support HTML5 multiple attribute. There is a property called ‘AllowedMultiple’ to support that attribute and with that you can easily upload the file. So what we are waiting for!! It’s time to create one example. On the default.aspx file I have written following. <asp:FileUpload ID="multipleFile" runat="server" AllowMultiple="true" /> <asp:Button ID="uploadFile" runat="server" Text="Upload files" onclick="uploadFile_Click"/> Here you can see that I have given file upload control id as multipleFile and I have set AllowMultiple file to true. I have also taken one button for uploading file.For this example I am going to upload file in images folder. As you can see I have also attached event handler for button’s click event. So it’s time to write server side code for this. Following code is for the server side. protected void uploadFile_Click(object sender, EventArgs e) { if (multipleFile.HasFiles) { foreach(HttpPostedFile uploadedFile in multipleFile.PostedFiles) { uploadedFile.SaveAs(System.IO.Path.Combine(Server.MapPath("~/Images/"),uploadedFile.FileName)); Response.Write("File uploaded successfully"); } } } Here in the above code you can see that I have checked whether multiple file upload control has multiple files or not and then I have save that in Images folder of web application. Once you run the application in browser it will look like following. I have selected two files. Once I have selected and clicked on upload file button it will give message like following. As you can see now it has successfully upload file and you can see in windows explorer like following. As you can see it’s very easy to upload multiple file in ASP.NET 4.5. Stay tuned for more. Till then happy programming. P.S.: This feature is only supported in browser who support HTML5 multiple file upload. For other browsers it will work like normal file upload control in asp.net.

    Read the article

  • What is the fastest MD5 sum calculator?

    - by netvope
    I tested the speed of md5sum on a few Ubuntu 8.04 servers Pentium III 700 MHz: 52 MB/s Atom 1.6 GHz, 32-bit: 119 MB/s Core 2 (Yorkfield) 2.5GHz, 32-bit: 194 MB/s Core 2 (Yorkfield) 2.5GHz, 64-bit: 222 MB/s Then I downloaded a tool (by apt-get install) called md5deep and found that it's roughly 20% faster (as tested on the 32-bit Core 2 server). This makes me feel that the "vanilla" md5sum included in Ubuntu isn't the fastest one. Questions: Other than md5deep, are you aware of any MD5 calculators that are potentially faster than md5sum? (Answers for software from other OS are also welcomed.) If I want to compile md5sum myself, where can I download the source? What compiler options would you suggest for the Core 2 server? (note: gcc 4.2.4 in Ubuntu 8.04 does not seem to support -march=core2)

    Read the article

  • sudo: must be setuid root

    - by Phuong Nguyen
    Recently, due to some messy stuff with master boot record, I have to re-install my Ubuntu. Before doing that, I back up all folder (exclude root, bin, sbin, tmp, media, mnt) to a NTFS partition. After installation of Ubuntu, I copied back all the folder using a nautilus (running by sudo nautilus). After that, I reboot my computer. And boom, now I cannot run sudo any more, my network services cannot run. When I run sudo from a terminal, I ge "must be setuid root" error. In ubuntu, root account is disabled by default, I don't know why all these files is no longer under ownership of my account. How would I recover back?

    Read the article

< Previous Page | 408 409 410 411 412 413 414 415 416 417 418 419  | Next Page >