Search Results

Search found 11259 results on 451 pages for 'extended properties'.

Page 413/451 | < Previous Page | 409 410 411 412 413 414 415 416 417 418 419 420  | Next Page >

  • Is That REST API Really RPC? Roy Fielding Seems to Think So.

    - by Rich Apodaca
    A large amount of what I thought I knew about REST is apparently wrong - and I'm not alone. This question has a long lead-in, but it seems to be necessary because the information is a bit scattered. The actual question comes at the end if you're already familiar with this topic. From the first paragraph of Roy Fielding's REST APIs must be hypertext-driven, it's pretty clear he believes his work is being widely misinterpreted: I am getting frustrated by the number of people calling any HTTP-based interface a REST API. Today’s example is the SocialSite REST API. That is RPC. It screams RPC. There is so much coupling on display that it should be given an X rating. Fielding goes on to list several attributes of a REST API. Some of them seem to go against both common practice and common advice on SO and other forums. For example: A REST API should be entered with no prior knowledge beyond the initial URI (bookmark) and set of standardized media types that are appropriate for the intended audience (i.e., expected to be understood by any client that might use the API). ... A REST API must not define fixed resource names or hierarchies (an obvious coupling of client and server). ... A REST API should spend almost all of its descriptive effort in defining the media type(s) used for representing resources and driving application state, or in defining extended relation names and/or hypertext-enabled mark-up for existing standard media types. ... The idea of "hypertext" plays a central role - much more so than URI structure or what HTTP verbs mean. "Hypertext" is defined in one of the comments: When I [Fielding] say hypertext, I mean the simultaneous presentation of information and controls such that the information becomes the affordance through which the user (or automaton) obtains choices and selects actions. Hypermedia is just an expansion on what text means to include temporal anchors within a media stream; most researchers have dropped the distinction. Hypertext does not need to be HTML on a browser. Machines can follow links when they understand the data format and relationship types. I'm guessing at this point, but the first two points above seem to suggest that API documentation for a Foo resource that looks like the following leads to tight coupling between client and server and has no place in a RESTful system. GET /foos/{id} # read a Foo POST /foos/{id} # create a Foo PUT /foos/{id} # update a Foo Instead, an agent should be forced to discover the URIs for all Foos by, for example, issuing a GET request against /foos. (Those URIs may turn out to follow the pattern above, but that's beside the point.) The response uses a media type that is capable of conveying how to access each item and what can be done with it, giving rise to the third point above. For this reason, API documentation should focus on explaining how to interpret the hypertext contained in the response. Furthermore, every time a URI to a Foo resource is requested, the response contains all of the information needed for an agent to discover how to proceed by, for example, accessing associated and parent resources through their URIs, or by taking action after the creation/deletion of a resource. The key to the entire system is that the response consists of hypertext contained in a media type that itself conveys to the agent options for proceeding. It's not unlike the way a browser works for humans. But this is just my best guess at this particular moment. Fielding posted a follow-up in which he responded to criticism that his discussion was too abstract, lacking in examples, and jargon-rich: Others will try to decipher what I have written in ways that are more direct or applicable to some practical concern of today. I probably won’t, because I am too busy grappling with the next topic, preparing for a conference, writing another standard, traveling to some distant place, or just doing the little things that let me feel I have I earned my paycheck. So, two simple questions for the REST experts out there with a practical mindset: how do you interpret what Fielding is saying and how do you put it into practice when documenting/implementing REST APIs? Edit: this question is an example of how hard it can be to learn something if you don't have a name for what you're talking about. The name in this case is "Hypermedia as the Engine of Application State" (HATEOAS).

    Read the article

  • availability of Win32_MountPoint and Win32_Volume on Windows XP?

    - by SteveC
    From the MSDN articles I've found -- http://msdn.microsoft.com/en-us/library/aa394515(v=VS.85).aspx -- Win32_Volume and Win32_MountPoint aren't available on Windows XP. However, I'm developing a C# app on Windows XP (64bit), and I can get to those WMI classes just fine. Users of my app will be on Windows XP sp2 with .Net 3.5 sp1. Googling around, I can't determine whether I can count on this or not. Am I successful on my system because of one or more of the following: - windows xp service pack 2? - visual studio 2008 sp1 was installed? - .Net 3.5 sp1? Should I use something other than WMI to get at the volume/mountpoint info? Below is sample code that's working... public static Dictionary<string, NameValueCollection> GetAllVolumeDeviceIDs() { Dictionary<string, NameValueCollection> ret = new Dictionary<string, NameValueCollection>(); // retrieve information from Win32_Volume try { using (ManagementClass volClass = new ManagementClass("Win32_Volume")) { using (ManagementObjectCollection mocVols = volClass.GetInstances()) { // iterate over every volume foreach (ManagementObject moVol in mocVols) { // get the volume's device ID (will be key into our dictionary) string devId = moVol.GetPropertyValue("DeviceID").ToString(); ret.Add(devId, new NameValueCollection()); //Console.WriteLine("Vol: {0}", devId); // for each non-null property on the Volume, add it to our NameValueCollection foreach (PropertyData p in moVol.Properties) { if (p.Value == null) continue; ret[devId].Add(p.Name, p.Value.ToString()); //Console.WriteLine("\t{0}: {1}", p.Name, p.Value); } // find the mountpoints of this volume using (ManagementObjectCollection mocMPs = moVol.GetRelationships("Win32_MountPoint")) { foreach (ManagementObject moMP in mocMPs) { // only care about adding directory // Directory prop will be something like "Win32_Directory.Name=\"C:\\\\\"" string dir = moMP["Directory"].ToString(); // find opening/closing quotes in order to get the substring we want int first = dir.IndexOf('"') + 1; int last = dir.LastIndexOf('"'); string dirSubstr = dir.Substring(first , last - first); // use GetFullPath to normalize/unescape any extra backslashes string fullpath = Path.GetFullPath(dirSubstr); ret[devId].Add(MOUNTPOINT_DIRS_KEY, fullpath); } } } } } } catch (Exception ex) { Console.WriteLine("Problem retrieving Volume information from WMI. {0} - \n{1}",ex.Message,ex.StackTrace); return ret; } return ret; }

    Read the article

  • Can't see why JavaMail doesn't work in a Spring MVC application on Tomcat

    - by Kartoch
    I have wrote a small web application using Spring MVC. It runs on tomcat and use the JavaMail library. At the present time I can't find why the mails are not sent. But I have no pertinent log messages in tomcat log files to find where is the problem. At the present time, my logging is configured in a log4j.properties file in the root of my CLASSPATH: log4j.rootLogger= DEBUG, CONSOLE log4j.appender.CONSOLE=org.apache.log4j.ConsoleAppender log4j.appender.CONSOLE.layout=org.apache.log4j.PatternLayout log4j.appender.CONSOLE.layout.ConversionPattern=%-4r [%t] %-5p %c %x - %m%n How can i see the java mail log message in debug mode ? I think it is related to JDK logging system (as I'm using Sun's JavaMail) but I don't know how to configure it. Edit: Well, one problem solves and another arises. I change my bean definition to include debug support for javamail: mail.debug=true But still no pertinent info in it: DEBUG: JavaMail version 1.4.1ea-SNAPSHOT DEBUG: not loading file: /usr/lib/jvm/java-6-sun-1.6.0.12/jre/lib/javamail.providers DEBUG: java.io.FileNotFoundException: /usr/lib/jvm/java-6-sun-1.6.0.12/jre/lib/javamail.providers (No such file or directory) DEBUG: !anyLoaded DEBUG: not loading resource: /META-INF/javamail.providers DEBUG: successfully loaded resource: /META-INF/javamail.default.providers DEBUG: Tables of loaded providers DEBUG: Providers Listed By Class Name:{com.sun.mail.smtp.SMTPSSLTransport=javax.mail.Provider[TRANSPORT,smtps,com.sun.mail.smtp.SMTPSSLTransport,Sun Microsystems, Inc], com.sun.mail.smtp.SMTPTransport=javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc], com.sun.mail.imap.IMAPSSLStore=javax.mail.Provider[STORE,imaps,com.sun.mail.imap.IMAPSSLStore,Sun Microsystems, Inc], com.sun.mail.pop3.POP3SSLStore=javax.mail.Provider[STORE,pop3s,com.sun.mail.pop3.POP3SSLStore,Sun Microsystems, Inc], com.sun.mail.imap.IMAPStore=javax.mail.Provider[STORE,imap,com.sun.mail.imap.IMAPStore,Sun Microsystems, Inc], com.sun.mail.pop3.POP3Store=javax.mail.Provider[STORE,pop3,com.sun.mail.pop3.POP3Store,Sun Microsystems, Inc]} DEBUG: Providers Listed By Protocol: {imaps=javax.mail.Provider[STORE,imaps,com.sun.mail.imap.IMAPSSLStore,Sun Microsystems, Inc], imap=javax.mail.Provider[STORE,imap,com.sun.mail.imap.IMAPStore,Sun Microsystems, Inc], smtps=javax.mail.Provider[TRANSPORT,smtps,com.sun.mail.smtp.SMTPSSLTransport,Sun Microsystems, Inc], pop3=javax.mail.Provider[STORE,pop3,com.sun.mail.pop3.POP3Store,Sun Microsystems, Inc], pop3s=javax.mail.Provider[STORE,pop3s,com.sun.mail.pop3.POP3SSLStore,Sun Microsystems, Inc], smtp=javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc]} DEBUG: successfully loaded resource: /META-INF/javamail.default.address.map DEBUG: !anyLoaded DEBUG: not loading resource: /META-INF/javamail.address.map DEBUG: not loading file: /usr/lib/jvm/java-6-sun-1.6.0.12/jre/lib/javamail.address.map DEBUG: java.io.FileNotFoundException: /usr/lib/jvm/java-6-sun-1.6.0.12/jre/lib/javamail.address.map (No such file or directory)

    Read the article

  • Cygwin in Windows 7

    - by Algorist
    Hi, I am a fan of linux but due to worst intel wireless drivers in linux, I had to switch to windows 7. I have installed cygwin in windows and want to configure ssh, to remotely connect to my laptop. I googled and found this webpage, http://art.csoft.net/2009/09/02/cygwin-ssh-server-and-windows-7/ I am getting the following error when running ssh-host-config. bala@bala-PC ~ $ ssh-host-config yes *** Info: Creating default /etc/ssh_config file *** Query: Overwrite existing /etc/sshd_config file? (yes/no) yes *** Info: Creating default /etc/sshd_config file *** Info: Privilege separation is set to yes by default since OpenSSH 3.3. *** Info: However, this requires a non-privileged account called 'sshd'. *** Info: For more info on privilege separation read /usr/share/doc/openssh/READ ME.privsep. *** Query: Should privilege separation be used? (yes/no) no *** Info: Updating /etc/sshd_config file *** Warning: The following functions require administrator privileges! *** Query: Do you want to install sshd as a service? *** Query: (Say "no" if it is already installed as a service) (yes/no) yes *** Query: Enter the value of CYGWIN for the daemon: [] *** Info: On Windows Server 2003, Windows Vista, and above, the *** Info: SYSTEM account cannot setuid to other users -- a capability *** Info: sshd requires. You need to have or to create a privileged *** Info: account. This script will help you do so. *** Warning: The owner and the Administrators need *** Warning: to have .w. permission to /var/run. *** Warning: Here are the current permissions and ACLS: *** Warning: drwxr-xr-x 1 bala None 0 2010-01-17 22:34 /var/run *** Warning: # file: /var/run *** Warning: # owner: bala *** Warning: # group: None *** Warning: user::rwx *** Warning: group::r-x *** Warning: other:r-x *** Warning: mask:rwx *** Warning: *** Warning: Please change the user and/or group ownership, *** Warning: permissions, or ACLs of /var/run. *** ERROR: Problem with /var/run directory. Exiting. The permissions of this folder are shown as Read-only(Only applies to this folder) checked in gray. I tried to uncheck, but after I open the properties again, the box is again checked. Is there a way to change the permissions of this folder. Thank you

    Read the article

  • General advice and guidelines on how to properly override object.GetHashCode()

    - by Svish
    According to MSDN, a hash function must have the following properties: If two objects compare as equal, the GetHashCode method for each object must return the same value. However, if two objects do not compare as equal, the GetHashCode methods for the two object do not have to return different values. The GetHashCode method for an object must consistently return the same hash code as long as there is no modification to the object state that determines the return value of the object's Equals method. Note that this is true only for the current execution of an application, and that a different hash code can be returned if the application is run again. For the best performance, a hash function must generate a random distribution for all input. I keep finding myself in the following scenario: I have created a class, implemented IEquatable<T> and overridden object.Equals(object). MSDN states that: Types that override Equals must also override GetHashCode ; otherwise, Hashtable might not work correctly. And then it usually stops up a bit for me. Because, how do you properly override object.GetHashCode()? Never really know where to start, and it seems to be a lot of pitfalls. Here at StackOverflow, there are quite a few questions related to GetHashCode overriding, but most of them seems to be on quite particular cases and specific issues. So, therefore I would like to get a good compilation here. An overview with general advice and guidelines. What to do, what not to do, common pitfalls, where to start, etc. I would like it to be especially directed at C#, but I would think it will work kind of the same way for other .NET languages as well(?). I think maybe the best way is to create one answer per topic with a quick and short answer first (close to one-liner if at all possible), then maybe some more information and end with related questions, discussions, blog posts, etc., if there are any. I can then create one post as the accepted answer (to get it on top) with just a "table of contents". Try to keep it short and concise. And don't just link to other questions and blog posts. Try to take the essence of them and then rather link to source (especially since the source could disappear. Also, please try to edit and improve answers instead of created lots of very similar ones. I am not a very good technical writer, but I will at least try to format answers so they look alike, create the table of contents, etc. I will also try to search up some of the related questions here at SO that answers parts of these and maybe pull out the essence of the ones I can manage. But since I am not very stable on this topic, I will try to stay away for the most part :p

    Read the article

  • How do I upload an NSImage(NSData)to Twitpic with OAMutableURLRequest?

    - by timothy5216
    I'm using OAConsumer in my xAuth twitterEngine and i'm adding Twitpic OAuth Echo to it. But it won't POST the NSData. here is some of my code: //other file NSArray *reps = [[imageToUpload image] representations]; NSData *imageData = [NSBitmapImageRep representationOfImageRepsInArray:reps usingType:NSJPEGFileType properties:nil]; [twitter testUploadImageData:imageData withMessage:@"Hello WORLD!!" toURL:[NSURL URLWithString:uploadURL.stringValue]]; // - (void)testUploadImageData:(NSData *)data withMessage:(NSString *)message toURL:(NSURL *)url; { //url = @"http://api.twitpic.com/2/upload.xml" //message = @"Hello WORLD!!" NSAutoreleasePool *pool = [[NSAutoreleasePool alloc] init]; NSString *String = [[NSString alloc] initWithData:data encoding:NSASCIIStringEncoding]; NSLog(@"dataString: %@",String); OAMutableURLRequest *request = [[OAMutableURLRequest alloc] initWithURL:url consumer:self.consumer token:_accessToken realm:nil signatureProvider:nil]; // Setup POST body [request setHTTPMethod:@"POST"]; //NSString *stringBoundary = [NSString stringWithString:@"0xKhTmLbOuNdArY"]; //NSString *contentType = [NSString stringWithFormat:@"multipart/form-data; boundary=%@", stringBoundary]; // NSString *stringBoundarySeparator = [NSString stringWithFormat:@"\r\n--%@\r\n", stringBoundary]; /* NSMutableString *postString = [NSMutableString string]; [postString appendString:@"\r\n"]; [postString appendString:stringBoundarySeparator]; [postString appendString:[NSString stringWithFormat:@"Content-Disposition: form-data; name=\"message\"\r\n\r\n%@", message]]; [postString appendString:stringBoundarySeparator]; [postString appendString:[NSString stringWithFormat:@"Content-Disposition: form-data; name=\"media\"; filename=\"%@\"\r\n", @"file.jpg"]]; [postString appendString:@"Content-Type: image/jpg\r\n"]; [postString appendString:@"Content-Transfer-Encoding: binary\r\n\r\n"]; // Setting up the POST request's multipart/form-data body NSMutableData *postBody = [NSMutableData data]; [postBody appendData:[postString dataUsingEncoding:NSUTF8StringEncoding]]; [postBody appendData:data]; [request setHTTPBody:postBody]; */ [request setHTTPMethod:@"POST"]; NSString *thing = [[NSString alloc] initWithData:data encoding:NSASCIIStringEncoding]; NSLog(@"%@",thing); [request setParameters:[NSArray arrayWithObjects: [OARequestParameter requestParameterWithName:@"oauth_token" value:_accessToken.key], [OARequestParameter requestParameterWithName:@"X-Auth-Service-Provider" value:@"https://api.twitter.com/1/account/verify_credentials.json"], [OARequestParameter requestParameterWithName:@"key" value:@"my-key-here :P"], [OARequestParameter requestParameterWithName:@"message" value:message], //iv'e changed this many times. I was just trying this to see if it works [OARequestParameter requestParameterWithName:@"media" value:thing], nil]]; OAAsynchronousDataFetcher *dataFetcher = [[OAAsynchronousDataFetcher alloc] init]; [dataFetcher initWithRequest:request delegate:self didFinishSelector:@selector(uploadDidUpload:withData:) didFailSelector:@selector(uploadDidFail:withData:)]; [dataFetcher start]; [dataFetcher release]; [request release]; [pool drain]; } I'm authenticated but it still won't POST the data :(

    Read the article

  • Pass or Get a value from Parent ViewModel down to Sub-ViewModel?

    - by mkmurray
    I am using the MVVM Light framework as well as Unity for DI. I have some nested Views, each bound to a corresponding ViewModel. The ViewModels are bound to each View's root control DataContext via the ViewModelLocator idea that Laurent Bugnion has put into MVVM Light. This allows for finding ViewModels via a static resource and for controlling the lifetime of ViewModels via a Dependency Injection framework, in this case Unity. It also allows for Expression Blend to see everything in regard to ViewModels and how to bind them. As I stated the Views have a healthy dose of nesting, but the ViewModels don't really know anything about each other. A parent view binds to its corresponding ViewModel via the static resource ViewModelLocator (which uses Unity to control the construction and lifetime of the ViewModel object). That parent view contains a user control in it that is another sub-view, which then goes and gets its corresponding ViewModel via the ViewModelLocator as well. The ViewModels don't have references to each other or know any hierarchy in regard to each other. So here's an example of how the ViewModels do interact via messaging. I've got a parent View that has a ComboBox databound to an ObservableCollection in its ViewModel. The ComboBox's SelectedItem is also bound (two-way) to a property on the ViewModel. When the selection of the ComboBox changes, this is to trigger updates in other Views and sub-Views. Currently I am accomplishing this via the Messaging system that is found in MVVM Light. So I'm wondering what the best practice would be to get information from one ViewModel to another? In this case, what I need to pass down to sub-ViewModels is basically a user Guid representing the currently logged in user. The top-most parent View (well, ViewModel) will know this information, but I'm not sure how to get it down into the sub-ViewModels. Some possible approaches I can think of: Should the sub-ViewModel ask the static resource ViewModelLocator for a reference to the same object the parent View is using and access the property that way? It seems like ViewModels going through each other's properties is not very clean and couples them together unnecessarily. I'm already using messaging to notify the sub-Views that the user selected a new item in the ComboBox and to update accordingly. But the object type that is being selected in the ComboBox is not really directly related to this data value that the sub-Views need.

    Read the article

  • Why does the interpretted order seem different from what I expect?

    - by inspectorG4dget
    I have a problem that I have not faced before: It seems that the order of interpretation in my program is somehow different from what I expect. I have written a small Twitter client. It takes a few seconds for my program to actually post a tweet after I click the "GO" button (which can also be activated by hitting ENTER on the keyboard). I don't want to click multiple times within this time period thinking that I hadn't clicked it the first time. Therefore, when the button is clicked, I would like the label text to display something that tells me that the button has been clicked. I have implemented this message by altering the label text before I send the tweet across. However, for some reason, the message does not display until the tweet has been attempted. But since I have a confirmation message after the tweet, I never get to see this message and my original problem goes unsolved. I would really appreciate any help. Here is the relevant code: class SimpleTextBoxForm(Form): def init(self): # set window properties self.Text = "Tweeter" self.Width = 235 self.Height = 250 #tweet away self.label = Label() self.label.Text = "Tweet Away..." self.label.Location = Point(10, 10) self.label.Height = 25 self.label.Width = 200 #get the tweet self.tweetBox = TextBox() self.tweetBox.Location = Point(10, 45) self.tweetBox.Width = 200 self.tweetBox.Height = 60 self.tweetBox.Multiline = True self.tweetBox.WordWrap = True self.tweetBox.MaxLength = 140; #ask for the login ID self.askLogin = Label() self.askLogin.Text = "Login:" self.askLogin.Location = Point(10, 120) self.askLogin.Height = 20 self.askLogin.Width = 60 self.login = TextBox() self.login.Text= "" self.login.Location = Point(80, 120) self.login.Height = 40 self.login.Width = 100 #ask for the password self.askPass = Label() self.askPass.Text = "Password:" self.askPass.Location = Point(10, 150) self.askPass.Height = 20 self.askPass.Width = 60 # display password box with character hiding self.password = TextBox() self.password.Location = Point(80, 150) self.password.PasswordChar = "x" self.password.Height = 40 self.password.Width = 100 #submit button self.button1 = Button() self.button1.Text = 'Tweet' self.button1.Location = Point(10, 180) self.button1.Click += self.update self.AcceptButton = self.button1 #pack all the elements of the form self.Controls.Add(self.label) self.Controls.Add(self.tweetBox) self.Controls.Add(self.askLogin) self.Controls.Add(self.login) self.Controls.Add(self.askPass) self.Controls.Add(self.password) self.Controls.Add(self.button1) def update(self, sender, event): if not self.password.Text: self.label.Text = "You forgot to enter your password..." else: self.tweet(self.tweetBox.Text, self.login.Text, self.password.Text) def tweet(self, msg, login, password): self.label.Text = "Attempting Tweet..." # this should be executed before sending the tweet is attempted. But this seems to be executed only after the try block try: success = 'Tweet successfully completed... yay!\n' + 'At: ' + time.asctime().split()[3] ServicePointManager.Expect100Continue = False Twitter().UpdateAsXML(login, password, msg) except: error = 'Unhandled Exception. Tweet unsuccessful' self.label.Text = error else: self.label.Text = success self.tweetBox.Text = ""

    Read the article

  • Why does the interpreted order seem different from what I expect?

    - by inspectorG4dget
    I have a problem that I have not faced before: It seems that the order of interpretation in my program is somehow different from what I expect. I have written a small Twitter client. It takes a few seconds for my program to actually post a tweet after I click the "GO" button (which can also be activated by hitting ENTER on the keyboard). I don't want to click multiple times within this time period thinking that I hadn't clicked it the first time. Therefore, when the button is clicked, I would like the label text to display something that tells me that the button has been clicked. I have implemented this message by altering the label text before I send the tweet across. However, for some reason, the message does not display until the tweet has been attempted. But since I have a confirmation message after the tweet, I never get to see this message and my original problem goes unsolved. I would really appreciate any help. Here is the relevant code: class SimpleTextBoxForm(Form): def __init__(self): # set window properties self.Text = "Tweeter" self.Width = 235 self.Height = 250 #tweet away self.label = Label() self.label.Text = "Tweet Away..." self.label.Location = Point(10, 10) self.label.Height = 25 self.label.Width = 200 #get the tweet self.tweetBox = TextBox() self.tweetBox.Location = Point(10, 45) self.tweetBox.Width = 200 self.tweetBox.Height = 60 self.tweetBox.Multiline = True self.tweetBox.WordWrap = True self.tweetBox.MaxLength = 140; #ask for the login ID self.askLogin = Label() self.askLogin.Text = "Login:" self.askLogin.Location = Point(10, 120) self.askLogin.Height = 20 self.askLogin.Width = 60 self.login = TextBox() self.login.Text= "" self.login.Location = Point(80, 120) self.login.Height = 40 self.login.Width = 100 #ask for the password self.askPass = Label() self.askPass.Text = "Password:" self.askPass.Location = Point(10, 150) self.askPass.Height = 20 self.askPass.Width = 60 # display password box with character hiding self.password = TextBox() self.password.Location = Point(80, 150) self.password.PasswordChar = "x" self.password.Height = 40 self.password.Width = 100 #submit button self.button1 = Button() self.button1.Text = 'Tweet' self.button1.Location = Point(10, 180) self.button1.Click += self.update self.AcceptButton = self.button1 #pack all the elements of the form self.Controls.Add(self.label) self.Controls.Add(self.tweetBox) self.Controls.Add(self.askLogin) self.Controls.Add(self.login) self.Controls.Add(self.askPass) self.Controls.Add(self.password) self.Controls.Add(self.button1) def update(self, sender, event): if not self.password.Text: self.label.Text = "You forgot to enter your password..." else: self.tweet(self.tweetBox.Text, self.login.Text, self.password.Text) def tweet(self, msg, login, password): self.label.Text = "Attempting Tweet..." # this should be executed before sending the tweet is attempted. But this seems to be executed only after the try block try: success = 'Tweet successfully completed... yay!\n' + 'At: ' + time.asctime().split()[3] ServicePointManager.Expect100Continue = False Twitter().UpdateAsXML(login, password, msg) except: error = 'Unhandled Exception. Tweet unsuccessful' self.label.Text = error else: self.label.Text = success self.tweetBox.Text = ""

    Read the article

  • Bazaar newbie question about repository structures

    - by esc1729
    I want to use Bazaar on Windows XP for web-development and related tasks. Most of the files are edited locally and then transferred via FTP to the server. Just now the repository sits on my local workstation. Later on it should be shared locally with some co-workers. Perhaps we will use a local Linux server as a centralized repository, but this structure is not decided for now. But first I need to understand the impacts of the different repository setups, which I do not at all. Using Bazaar-Explorer on Windows XP I’ve created a ‘shared tree repository’ from the option list of the init-dialogue in some location dev-filter/. Bazaar Explorer tells me: Created repository with treeless branches at F:/bzr.local/dev-filter Created branch at F:/bzr.local/dev-filter/trunk Created working tree at F:/bzr.local/dev-filter/work OK so far. Now I move a bunch of files into the work directory and add and commit them as Rev 1 ‘Start Revision’. Then I work on some of these files and commit them again as Rev 2. Here my confusion starts. Shouldn’t both revisions go into the trunk? The trunk is still empty, beside the .bzr directory which only holds some management information. If I delete my working directory, which I have tried during these first experiments, everything is gone. There’s obviously no hidden storage of those files. OK. Perhaps I need to push it into the trunk? This does not work either. Entering the work/ directory and initializing the ‘push’ to the trunk, Bazaar-Explorer tells me No new revisions to push. So what? This looks like a severe conceptual misunderstanding about what should happen on my side. Edit, 2010-02-03: Some conclusions What I learned meanwhile is this: I think I should switch to the command line until I really understand what’s going on, at least for creating the repositories and branches. Bazaar Explorer introduces a new level of abstraction which I only can handle if I understand the level beneath One of the secrets of working with Bazaar at least for me is to understand those .bzr directories, their particular properties and states when created with ‘bzr init’, ‘bzr init-repository’, ‘bzr branch’ etc. in all their variants and how they are plumped together. While there’s a whole chapter of ‘Organizing your workspace’ in the Bazaar User Guide, it’s more or less workflow oriented. The manual contains a lot of directory structures for the given examples. What I would prefer beside this and have not (or only rudimentary) found so far is some graphical representation of those ‘Lego like’ .bzr building blocks which create the linking of all the parts. So I started to invent some simple notation while working through the examples and looking into the .bzr directories to document what information is stored there, where does it come from, how and to what is it linked, is it complete or shared, etc. Erich Schreiber

    Read the article

  • Eclipse Dynamic Web Project fails to load under WTP

    - by Cue
    When trying to run an Eclipse Dynamic Web Project under a Tomcat setup using WTP, it fails with the attached stacktrace. Checklist At the project properties, under "Java EE Module Dependencies" I have checked the "Maven Dependencies" At the wtp deploy directory, under lib indeed all dependencies are present (esp. struts-taglib-1.3.10.jar) On the other hand, if I package with maven and copy the war file under the webapps directory everything is working as normal. Specification Eclipse JEE Galileo SR2 (with WTP 3.1.1) Tomcat 6.0.26 Java(TM) SE Runtime Environment (build 1.6.0_17-b04-248-10M3025) Java HotSpot(TM) 64-Bit Server VM (build 14.3-b01-101, mixed mode) stacktrace org.apache.jasper.JasperException: Unable to read TLD "META-INF/tld/struts-html-el.tld" from JAR file "file:/Users/cue/Development/workspace/eclipse/.metadata/.plugins/org.eclipse.wst.server.core/tmp2/wtpwebapps/ticketing/WEB-INF/lib/struts-el-1.3.10.jar": org.apache.jasper.JasperException: Failed to load or instantiate TagExtraInfo class: org.apache.struts.taglib.html.MessagesTei at org.apache.jasper.compiler.DefaultErrorHandler.jspError(DefaultErrorHandler.java:51) at org.apache.jasper.compiler.ErrorDispatcher.dispatch(ErrorDispatcher.java:409) at org.apache.jasper.compiler.ErrorDispatcher.jspError(ErrorDispatcher.java:181) at org.apache.jasper.compiler.TagLibraryInfoImpl.<init>(TagLibraryInfoImpl.java:182) at org.apache.jasper.compiler.Parser.parseTaglibDirective(Parser.java:383) at org.apache.jasper.compiler.Parser.parseDirective(Parser.java:446) at org.apache.jasper.compiler.Parser.parseElements(Parser.java:1393) at org.apache.jasper.compiler.Parser.parse(Parser.java:130) at org.apache.jasper.compiler.ParserController.doParse(ParserController.java:255) at org.apache.jasper.compiler.ParserController.parse(ParserController.java:103) at org.apache.jasper.compiler.Compiler.generateJava(Compiler.java:185) at org.apache.jasper.compiler.Compiler.compile(Compiler.java:347) at org.apache.jasper.compiler.Compiler.compile(Compiler.java:327) at org.apache.jasper.compiler.Compiler.compile(Compiler.java:314) at org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:589) at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:317) at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:313) at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:260) at javax.servlet.http.HttpServlet.service(HttpServlet.java:717) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:298) at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:852) at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:588) at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:489) at java.lang.Thread.run(Thread.java:637)

    Read the article

  • activeX component in axapta

    - by Nico
    hi folks, i'm struggling with an .net activeX i try to use in ms axapta 2009. using this component on my local machine where it was compiled, it's working quite fine. it can be added as activeX element on a form, the methods and events are listed in the axapta-activeX-explorer and i can interact with it without any problems. but trying to distribute the dll to other clients isn't working as intended. the registration of the dll via regasm /codebase /tlb works properly - getting the message, registration was successful. the component is also listed when selecting an activeX-element to add in ax, but neither functions nor properties are listed. and launching the form results in an errormessage - activeX component CLSID ... not found on system, not installed. the classID is indeed the one, defined in .net. strange things happen, having a look on the task-manager. the activeX-component itself is just a wrapper to interact with a com-application. when launching the ax-form with the not working and _not_installed_!! activeX-thing, the taskmanager shows a new process of the com-application, which is instanciated by the activeX :/ things i tried: using different versions of regasm, eg \Windows\Microsoft.NET\Framework\v2.0.50727 ; C:\Windows\Microsoft.NET\Framework64\v2.0.50727 using new GUIDs in .net, prior removing the old ones from the registry compiling, using different versions of the .net framework doing registration via regasm, regasm /codebase, regasm /codebase /tlb, using a visual-studio-setup running registration via command-line as administrator running setup as administrator running even ax as administrator on client-machine moving dll to a different folder followed by new registration ( windows/system32; ax/client/bin ) installing to GAC ( gacutil /i ) different project-options in visual studio ( COM-Visibility; register for COM-Interop; different targetPlatform ) hoped for the fact, that compiling in visual studio with register for COM-Interop option enabled does something more than just the regasm-registration, i used a registry-monitor-microsoft-tool for logging the registry-activity which happend during compilation. using these logs to create all registry-entries on the target-client in addition didn't work either. any hints or help would be so much appreciated! this thing is blocking me for days now :(

    Read the article

  • Generate Ant build file

    - by inakiabt
    I have the following project structure: root/ comp/ env/ version/ build.xml build.xml build.xml Where root/comp/env/version/build.xml is: <project name="comp-env-version" basedir="."> <import file="../build.xml" optional="true" /> <echo>Comp Env Version tasks</echo> <target name="run"> <echo>Comp Env Version run task</echo> </target> </project> root/comp/env/build.xml is: <project name="comp-env" basedir="."> <import file="../build.xml" optional="true" /> <echo>Comp Env tasks</echo> <target name="run"> <echo>Comp Env run task</echo> </target> </project> root/comp/build.xml is: <project name="comp" basedir="."> <echo>Comp tasks</echo> </project> Each build file imports the parent build file and each child inherits and overrides parent tasks/properties. What I need is to get the generated build XML without run anything. For example, if I run "ant" (or something like that) on root/comp/env/version/, I would like to get the following output: <project name="comp-env-version" basedir="."> <echo>Comp tasks</echo> <echo>Comp Env tasks</echo> <echo>Comp Env Version tasks</echo> <target name="run"> <echo>Comp Env Version run task</echo> </target> </project> Is there an Ant plugin to do this? With Maven? What are my options if not? EDIT: I need something like "mvn help:effective-pom" for Ant.

    Read the article

  • Reflection - SetValue of array within class?

    - by Jaymz87
    OK, I've been working on something for a while now, using reflection to accomplish a lot of what I need to do, but I've hit a bit of a stumbling block... I'm trying to use reflection to populate the properties of an array of a child property... not sure that's clear, so it's probably best explained in code: Parent Class: Public Class parent Private _child As childObject() Public Property child As childObject() Get Return _child End Get Set(ByVal value As child()) _child = value End Set End Property End Class Child Class: Public Class childObject Private _name As String Public Property name As String Get Return _name End Get Set(ByVal value As String) _name = value End Set End Property Private _descr As String Public Property descr As String Get Return _descr End Get Set(ByVal value As String) _descr = value End Set End Property End Class So, using reflection, I'm trying to set the values of the array of child objects through the parent object... I've tried several methods... the following is pretty much what I've got at the moment (I've added sample data just to keep things simple): Dim Results(1) As String Results(0) = "1,2" Results(1) = "2,3" Dim parent As New parent Dim child As childObject() = New childObject() {} Dim PropInfo As PropertyInfo() = child.GetType().GetProperties() Dim i As Integer = 0 For Each res As String In Results Dim ResultSet As String() = res.Split(",") ReDim child(i) Dim j As Integer = 0 For Each PropItem As PropertyInfo In PropInfo PropItem.SetValue(child, ResultSet(j), Nothing) j += 1 Next i += 1 Next parent.child = child This fails miserably on PropItem.SetValue with ArgumentException: Property set method not found. Anyone have any ideas? @Jon :- Thanks, I think I've gotten a little further, by creating individual child objects, and then assigning them to an array... The issue is now trying to get that array assigned to the parent object (using reflection). It shouldn't be difficult, but I think the problem comes because I don't necessarily know the parent/child types. I'm using reflection to determine which parent/child is being passed in. The parent always has only one property, which is an array of the child object. When I try assigning the child array to the parent object, I get a invalid cast exception saying it can't convert Object[] to . EDIT: Basically, what I have now is: Dim PropChildInfo As PropertyInfo() = ResponseObject.GetType().GetProperties() For Each PropItem As PropertyInfo In PropChildInfo PropItem.SetValue(ResponseObject, ResponseChildren, Nothing) Next ResponseObject is an instance of the parent Class, and ResponseChildren is an array of the childObject Class. This fails with: Object of type 'System.Object[]' cannot be converted to type 'childObject[]'.

    Read the article

  • Disable Autocommit in H2 with Hibernate/C3P0 ?

    - by HDave
    I have a JPA/Hibernate application and am trying to get it to run against H2 (as well as other databases). Currently I am using Atomikos for transaction and C3P0 for connection pooing. Despite my best efforts I am still seeing this in the log file (and DAO integration tests are failing): [20100613 23:06:34] DEBUG [main] SessionFactoryImpl.(242) | instantiating session factory with properties: .....edited for brevity.... hibernate.connection.autocommit=true, ....more stuff follows The connection URL to H2 has AUTOCOMMIT=OFF, but according to the H2 documentation: this will not work as expected when using a connection pool (the connection pool manager will re-enable autocommit when returning the connection to the pool, so autocommit will only be disabled the first time the connection is used So I figured (apparently correctly) that Hibernate is where I'll have to indicate I want autocommit off. I found the autocommit property documented here and I put it in my EntityManagerFactory config as follows: <bean id="myappTestLocalEmf" class="org.springframework.orm.jpa.LocalContainerEntityManagerFactoryBean"> <property name="persistenceUnitName" value="myapp-core" /> <property name="persistenceUnitPostProcessors"> <bean class="com.myapp.core.persist.util.JtaPersistenceUnitPostProcessor"> <property name="jtaDataSource" ref="myappPersistTestJdbcDataSource" /> </bean> </property> <property name="jpaVendorAdapter"> <bean class="org.springframework.orm.jpa.vendor.HibernateJpaVendorAdapter"> <property name="showSql" value="true" /> <property name="database" value="$DS{hibernate.database}" /> <property name="databasePlatform" value="$DS{hibernate.dialect}" /> </bean> </property> <property name="jpaProperties"> <props> <prop key="hibernate.transaction.factory_class">com.atomikos.icatch.jta.hibernate3.AtomikosJTATransactionFactory</prop> <prop key="hibernate.transaction.manager_lookup_class">com.atomikos.icatch.jta.hibernate3.TransactionManagerLookup</prop> <prop key="hibernate.connection.autocommit">false</prop> <prop key="hibernate.format_sql">true"</prop> <prop key="hibernate.use_sql_comments">true</prop> </property> </bean>

    Read the article

  • Failing Sata HDD

    - by DaveCol
    I think my HDD is fried... Could someone confirm or help me restore it? I was using Hardware RAID 1 Configuration [2 x 160GB SATA HDD] on a CentOS 4 Installation. All of a sudden I started seeing bad sectors on the second HDD which stopped being mirrored. I have removed the RAID array and have tested with SMART which showed the following error: 187 Unknown_Attribute 0x003a 001 001 051 Old_age Always FAILING_NOW 4645 I have no clue what this means, or if I can recover from it. Could someone give me some ideas on how to fix this, or what HDD to get to replace this? Complete SMART report: Smartctl version 5.33 [i686-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: GB0160CAABV Serial Number: 6RX58NAA Firmware Version: HPG1 User Capacity: 160,041,885,696 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a Local Time is: Tue Oct 19 13:42:42 2010 COT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 433) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 54) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 253 006 Pre-fail Always - 0 3 Spin_Up_Time 0x0002 097 097 000 Old_age Always - 0 4 Start_Stop_Count 0x0033 100 100 020 Pre-fail Always - 152 5 Reallocated_Sector_Ct 0x0033 095 095 036 Pre-fail Always - 214 7 Seek_Error_Rate 0x000f 078 060 030 Pre-fail Always - 73109713 9 Power_On_Hours 0x0032 083 083 000 Old_age Always - 15133 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0033 100 100 020 Pre-fail Always - 154 184 Unknown_Attribute 0x0032 038 038 000 Old_age Always - 62 187 Unknown_Attribute 0x003a 001 001 051 Old_age Always FAILING_NOW 4645 189 Unknown_Attribute 0x0022 100 100 000 Old_age Always - 0 190 Unknown_Attribute 0x001a 061 055 000 Old_age Always - 656408615 194 Temperature_Celsius 0x0000 039 045 000 Old_age Offline - 39 (Lifetime Min/Max 0/22) 195 Hardware_ECC_Recovered 0x0032 070 059 000 Old_age Always - 12605265 197 Current_Pending_Sector 0x0000 100 100 000 Old_age Offline - 1 198 Offline_Uncorrectable 0x0000 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0000 200 200 000 Old_age Offline - 62 SMART Error Log Version: 1 ATA Error Count: 4645 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 4645 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 02 7b 86 b1 ea 00 00:38:52.796 READ DMA ec 03 45 00 00 00 a0 00 00:38:52.796 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:52.794 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:49.991 IDENTIFY DEVICE c8 00 04 79 86 b1 ea 00 00:38:49.935 READ DMA Error 4644 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 04 79 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:49.991 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:49.935 READ DMA Error 4643 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA Error 4642 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA Error 4641 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 15131 - # 2 Short offline Completed without error 00% 15131 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

    Read the article

  • jQueryUI autocomplete - when no results are returned

    - by Brian M. Hunt
    I'm wondering how one can catch and add a custom handler when empty results are returned from the server when using jQueryUI autocomplete. There seem to be a few questions on this point related to the various jQuery plugins (e.g. jQuery autocomplete display “No data” error message when results empty), but I am wondering if there's a better/simpler way to achieve the same with the jQueryUI autocomplete. It seems to me this is a common use case, and I thought perhaps that jQueryUI had improved on the jQuery autocomplete by adding the ability to cleanly handle this situation. However I've not been able to find documentation of such functionality, and before I hack away at it I'd like to throw out some feelers in case others have seen this before. While probably not particularly influential, I can have the server return anything - e.g. HTTP 204: No Content to a 200/JSON empty list - whatever makes it easiest to catch the result in jQueryUI's autocomplete. My first thought is to pass a callback with two arguments, namely a request object and a response callback to handle the code, per the documentation: The third variation, the callback, provides the most flexibility, and can be used to connect any data source to Autocomplete. The callback gets two arguments: A request object, with a single property called "term", which refers to the value currently in the text input. For example, when the user entered "new yo" in a city field, the Autocomplete term will equal "new yo". A response callback, which expects a single argument to contain the data to suggest to the user. This data should be filtered based on the provided term, and can be in any of the formats described above for simple local data (String-Array or Object-Array with label/value/both properties). When the response callback receives no data, it inserts returns a special one-line object-array that has a label and an indicator that there's no data (so the select/focus recognize it as the indicator that no-data was returned). This seems overcomplicated. I'd prefer to be able to use a source: "http://...", and just have a callback somewhere indicating that no data was returned. Thank you for reading. Brian

    Read the article

  • Fluent NHibernate - How to map a non nullable foreign key that exists in two joined tables

    - by vakman
    I'm mapping a set of membership classes for my application using Fluent NHibernate. I'm mapping the classes to the asp.net membership database structure. The database schema relevant to the problem looks like this: ASPNET_USERS UserId PK ApplicationId FK NOT NULL other user columns ... ASPNET_MEMBERSHIP UserId PK,FK ApplicationID FK NOT NULL other membership columns... There is a one to one relationship between these two tables. I'm attempting to join the two tables together and map data from both tables to a single 'User' entity which looks like this: public class User { public virtual Guid Id { get; set; } public virtual Guid ApplicationId { get; set; } // other properties to be mapped from aspnetuser/membership tables ... My mapping file is as follows: public class UserMap : ClassMap<User> { public UserMap() { Table("aspnet_Users"); Id(user => user.Id).Column("UserId").GeneratedBy.GuidComb(); Map(user => user.ApplicationId); // other user mappings Join("aspnet_Membership", join => { join.KeyColumn("UserId"); join.Map(user => user.ApplicationId); // Map other things from membership to 'User' class } } } If I try to run with the code above I get a FluentConfiguration exception Tried to add property 'ApplicationId' when already added. If I remove the line "Map(user = user.ApplicationId);" or change it to "Map(user = user.ApplicationId).Not.Update().Not.Insert();" then the application runs but I get the following exception when trying to insert a new user: Cannot insert the value NULL into column 'ApplicationId', table 'ASPNETUsers_Dev.dbo.aspnet_Users'; column does not allow nulls. INSERT fails. The statement has been terminated. And if I leave the .Map(user = user.ApplicationId) as it originally was and make either of those changes to the join.Map(user = user.ApplicationId) then I get the same exception above except of course the exception is related to an insert into the aspnet_Membership table So... how do I do this kind of mapping assuming I can't change my database schema?

    Read the article

  • Displaytag table exported header column contains span tags

    - by Lancelot
    Hi, When I export the content of the display tag table I use the data shows up fine, but the header cells are surrounded by html span tags, which is slightly annoying. I can imagine why Displaytag uses spans around the column header's text, but it shouldn't transpose in the exported data I think. Here is my displaytag.properties config related to export: # Export export.amount = list export.decorated = true export.banner=<div id="exportTypes"><span class="label">Export: </span>{0}</div> export.banner.sepchar=&nbsp;| export.types=excel csv xml export.excel=true export.csv=true export.xml=false export.excel.label=xls export.csv.label=csv export.xml.label=xml export.excel.filename=export.xls export.csv.filename=export.csv export.xml.filename=export.xml export.excel.include_header=true export.csv.include_header=true export.xml.include_header=true Here is the displaytag table itself: <display:table class="list sortable" defaultsort="1" export="true" htmlId="contacts" id="row" name="contacts" requestURI=""> <display:setProperty name="export.banner"><div id="exportTypes"><span class="label">Export:</span> {0}</div></display:setProperty> <display:setProperty name="export.csv.filename">CSV</display:setProperty> <display:setProperty name="export.excel.filename">XLS</display:setProperty> <display:setProperty name="basic.msg.empty_list_row"> <tr class="empty"> <td colspan="7">Empty</td> </tr> </display:setProperty> <display:column class="lastName" property="lastName" sortProperty="lastName" headerClass="lastName first" sortable="true" titleKey="Lastname" href="contact/view" paramId="contactId" paramProperty="id" /> <display:column property="firstName" class="firstName" headerClass="firstName" sortable="true" titleKey="FirstName" /> <display:column class="loginName" headerClass="loginName" sortable="true" titleKey="Username" /> </display:table> My problem is when I click export on either the CSV or the XLS format the header row in the generated file looks like this: <span>Last Name</span> <span>First Name</span> <span>Username</span> I really don't want those span tags in there, any way to work around that? Thanks

    Read the article

  • Windows 7 SP1 not being offered on Windows Update

    - by Ian Boyd
    i have no option to install Windows 7 Service Pack 1 (SP1) on my computer. Why is the option to install Windows 7 SP1 missing from Windows Update? i'm less interested in why the option is missing, and more interested in how to diagnose why the option to install Windows 7 SP1 is being hidden. Following the suggestions in KB2498452 - You do not have the option of downloading Windows 7 SP1 when you use Windows Update to check for updates: Confirm that Windows 7 SP1 is not already installed and that you are not running a prerelease version of Windows 7 SP1 i am not already running SP1, or a pre-release SP1: Check for pending updates Update 976902 may have to be installed on your computer before Windows 7 SP1 will be offered in Windows Update. i already have 976902 installed: Verify that an incompatible version of SafeCentral is not installed on your computer Windows SP1 may not appear in Windows Update if certain versions of SafeCentral are installed on your computer. SafeCentral is a security program that is manufactured by SafeCentral, Inc. i do not have SafeCentral installed (i've never heard of such a thing): Check whether you have Intel integrated graphics driver Igdkmd32.sys or Igdkmd64.sys and whether you upgraded the driver i do not have an Intel GMA: Make sure that you did not use vLite to customize your Windows 7 installation i did not use vLite to customize my Windows 7 installation. Again, i've never heard of such a thing. Update One: Here's proof that i've checked for updates "today" (3/2/2011): And that i'm not being presented the option of installing SP1 (i dispatched an update to Silverlight and a fix for IE9 being hosted in a Direct2D or Direct3D application; so updates themselves do work): Update Two Tried the Windows Update Troubleshooter: Window 7 Service Pack 1 is still not available. Update Three Here is the tail end of windowsupdate.log. It speaks of Evaluating application rules: Found 2 updates and 65 categories in search; evaluated appl. rules of 1324 out of 1832 deployed entities These must be the rules that say i'm not allowed to see SP1: 2011-03-03 09:21:08:091 924 db4 AU Triggering AU detection through DetectNow API 2011-03-03 09:21:08:091 924 db4 AU Triggering Online detection (interactive) 2011-03-03 09:21:08:091 924 950 AU ############# 2011-03-03 09:21:08:092 924 950 AU ## START ## AU: Search for updates 2011-03-03 09:21:08:092 924 950 AU ######### 2011-03-03 09:21:08:093 924 950 AU <<## SUBMITTED ## AU: Search for updates [CallId = {8517376A-B8A3-488B-B4D4-67DFC75788C8}] 2011-03-03 09:21:08:093 924 ca8 Agent ************* 2011-03-03 09:21:08:093 924 ca8 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates] 2011-03-03 09:21:08:093 924 ca8 Agent ********* 2011-03-03 09:21:08:093 924 ca8 Agent * Online = Yes; Ignore download priority = No 2011-03-03 09:21:08:093 924 ca8 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1" 2011-03-03 09:21:08:093 924 ca8 Agent * ServiceID = {7971F918-A847-4430-9279-4A52D1EFE18D} Third party service 2011-03-03 09:21:08:093 924 ca8 Agent * Search Scope = {Machine} 2011-03-03 09:21:08:094 924 ca8 Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab: 2011-03-03 09:21:08:097 924 ca8 Misc Microsoft signed: Yes 2011-03-03 09:21:08:287 924 ca8 Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab: 2011-03-03 09:21:08:289 924 ca8 Misc Microsoft signed: Yes 2011-03-03 09:21:08:292 924 ca8 Agent Checking for updated auth cab for service 7971f918-a847-4430-9279-4a52d1efe18d at http://download.windowsupdate.com/v9/microsoftupdate/redir/muauth.cab 2011-03-03 09:21:08:292 924 ca8 Misc Validating signature for C:\Windows\SoftwareDistribution\AuthCabs\authcab.cab: 2011-03-03 09:21:08:294 924 ca8 Misc Microsoft signed: Yes 2011-03-03 09:21:08:354 924 ca8 Misc Validating signature for C:\Windows\SoftwareDistribution\AuthCabs\authcab.cab: 2011-03-03 09:21:08:356 924 ca8 Misc Microsoft signed: Yes 2011-03-03 09:21:08:356 924 ca8 Setup Checking for agent SelfUpdate 2011-03-03 09:21:08:356 924 ca8 Setup Client version: Core: 7.3.7600.16385 Aux: 7.3.7600.16385 2011-03-03 09:21:08:357 924 ca8 Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab: 2011-03-03 09:21:08:359 924 ca8 Misc Microsoft signed: Yes 2011-03-03 09:21:08:418 924 ca8 Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab: 2011-03-03 09:21:08:420 924 ca8 Misc Microsoft signed: Yes 2011-03-03 09:21:08:422 924 ca8 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab: 2011-03-03 09:21:08:424 924 ca8 Misc Microsoft signed: Yes 2011-03-03 09:21:08:655 924 ca8 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab: 2011-03-03 09:21:08:658 924 ca8 Misc Microsoft signed: Yes 2011-03-03 09:21:08:659 924 ca8 Setup Skipping SelfUpdate check based on the /SKIP directive in wuident 2011-03-03 09:21:08:659 924 ca8 Setup SelfUpdate check completed. SelfUpdate is NOT required. 2011-03-03 09:21:08:808 924 ca8 Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\muv4muredir.cab: 2011-03-03 09:21:08:810 924 ca8 Misc Microsoft signed: Yes 2011-03-03 09:21:08:872 924 ca8 Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\muv4muredir.cab: 2011-03-03 09:21:08:874 924 ca8 Misc Microsoft signed: Yes 2011-03-03 09:21:08:876 924 ca8 PT +++++++++++ PT: Synchronizing server updates +++++++++++ 2011-03-03 09:21:08:877 924 ca8 PT + ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}, Server URL = https://www.update.microsoft.com/v6/ClientWebService/client.asmx 2011-03-03 09:21:13:958 924 ca8 Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\muv4muredir.cab: 2011-03-03 09:21:13:960 924 ca8 Misc Microsoft signed: Yes 2011-03-03 09:21:14:083 924 ca8 Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\muv4muredir.cab: 2011-03-03 09:21:14:085 924 ca8 Misc Microsoft signed: Yes 2011-03-03 09:21:14:087 924 ca8 PT +++++++++++ PT: Synchronizing extended update info +++++++++++ 2011-03-03 09:21:14:087 924 ca8 PT + ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}, Server URL = https://www.update.microsoft.com/v6/ClientWebService/client.asmx 2011-03-03 09:21:14:395 924 ca8 Agent * Added update {414642E2-5F20-4AD1-AA5A-773061238B5F}.101 to search result 2011-03-03 09:21:14:395 924 ca8 Agent * Added update {56D5FC3D-9AC8-44F1-A248-8C397A24D02F}.100 to search result 2011-03-03 09:21:14:395 924 ca8 Agent * Found 2 updates and 65 categories in search; evaluated appl. rules of 1324 out of 1832 deployed entities 2011-03-03 09:21:14:396 924 ca8 Agent ********* 2011-03-03 09:21:14:396 924 ca8 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates] 2011-03-03 09:21:14:396 924 ca8 Agent ************* 2011-03-03 09:21:14:404 924 ce0 AU >>## RESUMED ## AU: Search for updates [CallId = {8517376A-B8A3-488B-B4D4-67DFC75788C8}] 2011-03-03 09:21:14:404 924 ce0 AU # 2 updates detected 2011-03-03 09:21:14:404 924 ce0 AU ######### 2011-03-03 09:21:14:404 924 ce0 AU ## END ## AU: Search for updates [CallId = {8517376A-B8A3-488B-B4D4-67DFC75788C8}] 2011-03-03 09:21:14:404 924 ce0 AU ############# 2011-03-03 09:21:14:404 924 ce0 AU Successfully wrote event for AU health state:0 2011-03-03 09:21:14:405 924 ce0 AU ############# 2011-03-03 09:21:14:405 924 ce0 AU ## START ## AU: Refresh featured updates info 2011-03-03 09:21:14:405 924 ce0 AU ######### 2011-03-03 09:21:14:405 924 ce0 AU No featured updates available. 2011-03-03 09:21:14:405 924 ce0 AU ######### 2011-03-03 09:21:14:405 924 ce0 AU ## END ## AU: Refresh featured updates info 2011-03-03 09:21:14:405 924 ce0 AU ############# 2011-03-03 09:21:14:405 924 ce0 AU No featured updates notifications to show 2011-03-03 09:21:14:405 924 ce0 AU AU setting next detection timeout to 2011-03-04 08:03:53 2011-03-03 09:21:14:405 924 ce0 AU Setting AU scheduled install time to 2011-03-04 08:00:00 2011-03-03 09:21:14:405 924 ce0 AU Successfully wrote event for AU health state:0 2011-03-03 09:21:14:406 924 ce0 AU Successfully wrote event for AU health state:0 2011-03-03 09:21:14:407 924 db4 AU Getting featured update notifications. fIncludeDismissed = true 2011-03-03 09:21:14:408 924 db4 AU No featured updates available. 2011-03-03 09:21:19:396 924 ca8 Report REPORT EVENT: {633538B3-030E-4CAD-BE6B-33C6ED65AFF1} 2011-03-03 09:21:14:395-0500 1 147 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Software Synchronization Windows Update Client successfully detected 2 updates. 2011-03-03 09:21:19:396 924 ca8 Report CWERReporter finishing event handling. (00000000) i'm less interested in why the option to install Windows 7 SP1 is missing, and more interested in how to diagnose why the option to install Windows 7 SP1 is being hidden. The KB article says that SP1 will not be offered if your machine doesn't meet some secret special criteria. How can i discover what that secret criteria is? i presume it is logged somewhere. Nor am i particularly interested in a direct download link. i want to learn here. i want to be able to diagnose (i.e. in the future) why an update is not being offered. i'm a superuser here. Rather than others coming up with a checklist of things to try, i want to be able to come up with the checklist.

    Read the article

  • How to best design a date/geographic proximity query on GAE?

    - by Dane
    Hi all, I'm building a directory for finding athletic tournaments on GAE with web2py and a Flex front end. The user selects a location, a radius, and a maximum date from a set of choices. I have a basic version of this query implemented, but it's inefficient and slow. One way I know I can improve it is by condensing the many individual queries I'm using to assemble the objects into bulk queries. I just learned that was possible. But I'm also thinking about a more extensive redesign that utilizes memcache. The main problem is that I can't query the datastore by location because GAE won't allow multiple numerical comparison statements (<,<=,=,) in one query. I'm already using one for date, and I'd need TWO to check both latitude and longitude, so it's a no go. Currently, my algorithm looks like this: 1.) Query by date and select 2.) Use destination function from geopy's distance module to find the max and min latitude and longitudes for supplied distance 3.) Loop through results and remove all with lat/lng outside max/min 4.) Loop through again and use distance function to check exact distance, because step 2 will include some areas outside the radius. Remove results outside supplied distance (is this 2/3/4 combination inefficent?) 5.) Assemble many-to-many lists and attach to objects (this is where I need to switch to bulk operations) 6.) Return to client Here's my plan for using memcache.. let me know if I'm way out in left field on this as I have no prior experience with memcache or server caching in general. -Keep a list in the cache filled with "geo objects" that represent all my data. These have five properties: latitude, longitude, event_id, event_type (in anticipation of expanding beyond tournaments), and start_date. This list will be sorted by date. -Also keep a dict of pointers in the cache which represent the start and end indices in the cache for all the date ranges my app uses (next week, 2 weeks, month, 3 months, 6 months, year, 2 years). -Have a scheduled task that updates the pointers daily at 12am. -Add new inserts to the cache as well as the datastore; update pointers. Using this design, the algorithm would now look like: 1.) Use pointers to slice off appropriate chunk of list based on supplied date. 2-4.) Same as above algorithm, except with geo objects 5.) Use bulk operation to select full tournaments using remaining geo objects' event_ids 6.) Assemble many-to-manys 7.) Return to client Thoughts on this approach? Many thanks for reading and any advice you can give. -Dane

    Read the article

  • How to inherit from DataAnnotations.ValidationAttribute (it appears SecureCritical under Visual Stud

    - by codetuner
    Hi, I have an [AllowPartiallyTrustedCallers] class library containing subtypes of the System.DataAnnotations.ValidationAttribute. The library is used on contract types of WCF services. In .NET 2/3.5, this worked fine. Since .NET 4.0 however, running a client of the service in the Visual Studio debugger results in the exception "Inheritance security rules violated by type: '(my subtype of ValidationAttribute)'. Derived types must either match the security accessibility of the base type or be less accessible." (System.TypeLoadException) The error appears to occure only when all of the following conditions are met: a subclass of ValidationAttribute is in an AllowPartiallyTrustedCallers assembly reflection is used to check for the attribute the Visual Studio hosting process is enabled (checkbox on Project properties, Debug tab) So basically, in Visual Studio.NET 2010: create a new Console project, add a reference to "System.ComponentModel.DataAnnotations" 4.0.0.0, write the following code: . using System; [assembly: System.Security.AllowPartiallyTrustedCallers()] namespace TestingVaidationAttributeSecurity { public class MyValidationAttribute : System.ComponentModel.DataAnnotations.ValidationAttribute { } [MyValidation] public class FooBar { } class Program { static void Main(string[] args) { Console.WriteLine("ValidationAttribute IsCritical: {0}", typeof(System.ComponentModel.DataAnnotations.ValidationAttribute).IsSecurityCritical); FooBar fb = new FooBar(); fb.GetType().GetCustomAttributes(true); Console.WriteLine("Press enter to end."); Console.ReadLine(); } } } Press F5 and you get the exception ! Press Ctrl-F5 (start without debugging), and it all works fine without exception... The strange thing is that the ValidationAttribute will or will not be securitycritical depending on the way you run the program (F5 or Ctrl+F5). As illustrated by the Console.WriteLine in the above code. But then again, this appear to happen with other attributes (and types?) too. Now the questions... Why do I have this behaviour when inheriting from ValidationAttribute, but not when inheriting from System.Attribute ? (Using Reflector I don't find special settings on the ValidationAttribute class or it's assembly) And what can I do to solve this ? How can I keep MyValidationAttribute inheriting from ValidationAttribute in an AllowPartiallyTrustedCallers assembly without marking it SecurityCritical, still using the new .NET 4 level 2 security model and still have it work using the VS.NET debug host (or other hosts) ?? Thanks a lot! Rudi

    Read the article

  • My computer freezes irregularly

    - by Manhim
    My computer started to freeze at irregular times for 3 weeks now. Please note that this question change with each things that i try. (For additional details) What happens My computer freezes, the video stops. (No graphic glitches, it just stops) Sound keeps playing up to some time (Usually 10-30 seconds) then stops playing. Sometimes, randomly, the screen on my G-15 keyboard flickers and I see caracters not at the right places. Usually happens for about 1-2 seconds and a bit before my computer freezes. I have to keep the power button pressed for 4 seconds to shut my computer down. I still hear my hard drives and fans working. Sometimes it works with no problems for a full day, some other times it just keeps freezing each time I restart my computer and I have to leave it for the rest of the day. Sometimes my mouse freezes for a fraction of a second (Like 0.01 to 0.2 seconds) quite randomly, usually before it freezes. No errors spotted by the "Action center" unlike when I had problems with my last video card on this system (Driver errors). My G-15 LCD screen also freezes. Sometimes my G-15 LCD screen flickers and caracters gets caried around temporary under heavy load. Now, most of the times, the BIOS hard disks boot order gets reversed for some reason and I have to put it to the right one and save each times I boot. (Might be unrelated, not sure, but it first started yesterday) Sometimes the BIOS doesn't detect my 750GB hard drive plugged in SATA1. What I did so far I have had similar problems in the past and I had changed my hard drive (It was faulty), so I tested my software RAID-0 array and it was faulty so I changed it. (I reinstalled Windows 7 with this part). I also tested with unplugging my secondary hard drive. My CPU was running at about 100 degree Celsius, I removed the dust between the fans and the heatsink and it's now between 45-55. I ran a CPU stress-test and it didn't freeze during the tests (using Prime95 on all cores) Ran a memory test (using memtest86+) for a single pass and there were no errors. Ran a GPU stress test with ati-tools and furmark and it didn't freeze during the tests. (No artefacts either) I had troubles with my graphic card when I got it, but I think that it got fixed with a driver update. I checked the voltages in my BIOS setup and they all seemed ok (±0.2 I think). I have ran on the computer without problems with Fedora 15 on an external hard drive (Appart that it couldn't load Gnome 3 and was reverting to Gnome 2, didn't want to install drivers since I use it on multiple computers) I used it to backup my files from the raid array to my 1TB hard drive for the reinstallation of Windows. (So the crashes only happenned on Windows) [The external hard drive is plugged directly on a SATA port] I contacted EVGA (My graphic card vendor) and pointed them on this question, I'm looking for an answer. Ran sensors on Fedora 15 and got this output: http://pastebin.com/0BHJnAvu Ran 6 short different CPU stress test on Fedora 15 (Haven't found any complete stress testers for Linux) and it didn't crash. Changed the thermal paste to some Artic Silver 5 for my CPU and stress tested the CPU, temperature was at 50 idle, then 64 highest and slowly went down to 62 during the test. Ran some stress testing with a temporary graphic card and it went ok. Ran furmark stress test with my original graphic card and it freezed again. GPU had a temp of 74C, a CPU temp of 58C and a mobo temp of 40C or 45C (Dunno which one it is from SpeedFan). Ran a furmark stress test and a CPU stress test at the same time, results: http://pastebin.com/2t6PLpdJ I have been using my computer without stressing it for about 2 hours now and no crashes yet. I also have disabled the AMD Cool'n'quiet function on the BIOS for a more regular power to the CPU. When I ran Furmark without C'n'q my computer didn't freeze but I had a "Driver Kernel Error" that have recovered (And Furmark crashed) all that while running a CPU stress test. The computer eventually frozed without me being at it, but this time my screen just went on sleep and I couldn't wake it. Using the stability tester in nTune my computer freezed again (In the same manner as before). I notived that Speedfan gives me a -12V of -16.97V and a -5V of -8.78V. I wonder if these numbers are reliable and if they are good or bad. I have swapped my G-15 with another basic USB keyboard (HP) and I have ran furmark for about 10 minutes with a CPU stability test running each 60 seconds for 30 seconds and my computer haven't crashed yet. Ran some more extended tests without my G-15 and it freezed like it usually do. Removed the nForce Hard disk controler. Disabled command queuing in the NVIDIA nForce SATA Controller for both port 0 and port 1 (Errors from the logs) Used CPUID HwMonitor, here are the voltages: http://pastebin.com/dfM7p4jV Changed some configurations in the motherboard BIOS: Disabled PEG Link Mode, Changed AI Tuning to Standard, Disabled the 1394 Controller, Disabled HD Audio, Disabled JMicron RAID controller and Disabled SATA Raid. When it happens When I play video games (Mostly) When I play flash games (Second most) When I'm looking at my desktop background (It rarely happens when I have a window open, but it does, sometimes) When my Graphic card and my CPU are stressed. Sometimes when my Graphic card is stressed. Never happenned while stressing only the CPU. Sometimes when my CPU is stressed. Specs Windows Seven x64 Home Premium Motherboard: M2N-SLI Deluxe CPU: AMD Phenom 9950 x2 @ 2.6GHz Memory: Kingston 4x2GB Dual Channel (Pretty basic memory sticks) Hard drives: Was 2x250GB (Western digital caviar) in raid-0 + 1TB (WD caviar black), I replaced the raid array with a 750GB (WD caviar black) [Yes I removed the array from the raid configurations] 750W Power supply No overcloking. Ever. There have been some power-downs like 4-5 weeks ago, but the problem didn't start immediately after. (I wasn't home, so my computer got shut-down) Event logs (Warnings, errors and critical errors) for the last 24 hours: http://pastebin.com/Bvvk31T7 My current to-try list Reinstall the drivers and software 1 by 1 and do extensive stress testing between each. Update the BIOS firmware to the most recent stable one. Change my motherboard. Status updates Keeping only the last 3 (28/06 04pm) More stress testing and still pass the tests. (28/06 03pm) Been stress testing for 10 minute straight now and 5 minutes with both CPU and GPU being stressed at the same time. (28/06 03pm) Stress-testing right now, so far no problems. A little hope Tests with Furmark and Prime95. Testing Windows bare-bone: 30 Minutes stress, no freeze. Installing an Anti-virus and some software, restarting computer. Testing with Anti-virus and some software (No drivers installed): 30 Minutes stress, no freeze. Installing audio drivers, restarting computer. Testing with the audio drivers: 30 Minutes stress, no freeze. Installing the latest graphic drivers from EVGA's website (without 3d vision since I don't use it), restarting computer. Testing with the graphic drivers: 30 Minutes stress, no freeze. Configuring Windows to my liking and installing more softwares. In this situation, how can I successfully pin-point the current hardware problem? (If it's a hardware problem) Because I don't really have the budget to just forget and replace everything. I also don't really have hardware to test-replace current hardware.

    Read the article

  • Hard Disk DRDY error: is it a crash

    - by pranjal
    I am using IBM Thinkpad, 1.7GHz, 512 RAM with Linux Mint 9 installed. I have two partitions in addition to root. One of the partitions became read-only yesterday, after which I rebooted my system. It is extremely slow along with DRDY Error : Is my Hard disk crashed ? Error Log while booting. Differences between boot sector and its backup. failed command : READ DMA BMDMA : stat 0X25 ata 1.00 : status : { DRDY ERR } ata 1.00 : status :{ UNC } Buffer I/O error on logical device, logical block 65467 smartctl output for the partition: mint mint # smartctl -a /dev/sda1 smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: TOSHIBA MK4026GAX RoHS Serial Number: X5LY1623T Firmware Version: PA107E User Capacity: 40,007,761,920 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 6 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Feb 17 06:48:25 2011 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 153) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 30) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 310 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 3968 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 40 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 082 082 000 Old_age Always - 7257 10 Spin_Retry_Count 0x0033 179 100 030 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3484 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 489 193 Load_Cycle_Count 0x0032 064 064 000 Old_age Always - 367150 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 36 (Lifetime Min/Max 14/57) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 33 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 82 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 1 199 UDMA_CRC_Error_Count 0x0032 200 253 000 Old_age Always - 0 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 101 222 Loaded_Hours 0x0032 085 085 000 Old_age Always - 6146 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 227 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0 SMART Error Log Version: 1 ATA Error Count: 2371 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2371 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:03:10.061 READ DMA f8 00 00 00 00 00 e0 00 00:03:10.061 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:03:10.053 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:03:10.053 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:03:10.053 READ NATIVE MAX ADDRESS Error 2370 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:03:03.328 READ DMA f8 00 00 00 00 00 e0 00 00:03:03.327 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:03:03.320 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:03:03.319 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:03:03.319 READ NATIVE MAX ADDRESS Error 2369 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:02:56.582 READ DMA f8 00 00 00 00 00 e0 00 00:02:56.582 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:02:56.574 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:02:56.574 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:02:56.574 READ NATIVE MAX ADDRESS Error 2368 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:02:49.809 READ DMA f8 00 00 00 00 00 e0 00 00:02:49.809 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:02:49.801 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:02:49.801 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:02:49.801 READ NATIVE MAX ADDRESS Error 2367 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:02:43.056 READ DMA f8 00 00 00 00 00 e0 00 00:02:43.056 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:02:43.048 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:02:43.048 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:02:43.047 READ NATIVE MAX ADDRESS SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Device does not support Selective Self Tests/Logging Do I need to get a new Hard Disk my PC ?

    Read the article

  • Print Preview Control used in a custom Print Preview Dialog.

    - by Kildareflare
    I have successfully implemented printing and print preview for my app using the PrintDocument, PrintDialog and PrintPreviewDialog classes of .NET. However my app uses a toolkit to improve the appearance of the standard .NET controls. There are versions of most .NET controls in the toolkit, but none for the Print controls. Therefore to ensure that the appearance of these controls matches the rest of the app I am creating a custom PrintPreviewDialog based on a toolkit form and embedding a .NET PrintPrewviewControl in it. My problem is that the PrintPreviewControl always shows "No pages to display". I had no trouble getting this to work using the .NET PrintPreviewDialog and cannot see what I am doing wrong. This is a .NET 2.0 PrintPreviewControl and so I know that I need to call InvalidatePreview() after assigning the PrintDocument. However it does not seem to matter where i place it, the PrintPage event handler never gets called... EDIT: I've just noticed that while the original PrintDocument m_printDocument shows a PrintPageHandler in its properties, the m_printPreviewControl.Document does not. Any ideas why it is being lost..? public class PrintEngine { ...rest of class... public PrintEngine() { m_printDoc.PrintPage += new PrintPageEventHandler(printDoc_PrintPage); } public void PrintPreview() { //ORIGINAL CODE USING .NET DIALOG WORK OK //PrintPreviewDialog dlg1 = new PrintPreviewDialog(); //dlg1.Document = m_printDoc; //PrepareImageForPrinting(); //dlg1.ShowDialog(); //CODE USING MY CUSTOM DIALOG DO NOT WORK? MyPrintPreviewDialog dlg2 = new MyPrintPreviewDialog(); dlg2.Document = m_printDoc; PrepareImageForPrinting(); //Creates the m_printImage List dlg2.ShowDialog(); } private void printDoc_PrintPage(object sender, PrintPageEventArgs e) { e.Graphics.DrawImage(m_printImages[m_currentPage], new Point(0, 0)); m_currentPage++; e.HasMorePages = m_currentPage < m_pagesHigh; } }//end PrintEngine class public class MyPrintPreviewDialog : KryptonForm { public PrintDocument Document { get { return m_printPreviewControl.Document; } set { m_printPreviewControl.Document = value; m_printPreviewControl.InvalidatePreview(); } } public MyPrintPreviewDialog() { InitializeComponent(); m_printPreviewControl = new PrintPreviewControl(); m_printPreviewControl.StartPage = 0; } private void MyPrintPreviewDialog_Load(object sender, EventArgs e) { m_printPreviewControl.Document.DefaultPageSettings = new PageSettings(); m_printPreviewControl.Document.PrinterSettings = new PrinterSettings(); m_printPreviewControl.InvalidatePreview(); } }//end MyPrintPreviewDialog class

    Read the article

< Previous Page | 409 410 411 412 413 414 415 416 417 418 419 420  | Next Page >