Search Results

Search found 31200 results on 1248 pages for 'field service'.

Page 413/1248 | < Previous Page | 409 410 411 412 413 414 415 416 417 418 419 420  | Next Page >

  • 4in6 tunneling (via OpenVPN?)

    - by Deshene
    I have a local network with internet access. But unfortunately IPv4 internet connection speed is limited to 1mbps, which is realy sad. Fortunately I have a native IPv6, and there is no connection speed limit over IPv6. So, in order to get a good internet connection I made a plan: connect to the VPN-service over IPv6, and pass all IPv4 traffic through IPv6 tunnel, or something like that, I think you get the idea. I suggested to use service like HideMyAss.com, but unfortunately they don't support IPv6. The question is: Is there any existing VPN service that will make my dreams come true, and is easy to use, which I could connect over PPTP or OpenVPN (I want to set up connection to VPN in my router settings). Edit: It seems like there are couple of VPN services that supports IPv6 (it's odd, but the biggest VPN services support only IPv4), and there is none providing 4in6 tunnels. So, I came to the following solution: rent a VPS with IPv6 address, and manually setup 4in6 tunnel. I'm not good at networking, never did things like that, and don't know where to start, and what should I do. The use case, as I undestand, should look like this: I connect from my home computer to the VPS via OpenVPN, and after that all my IPv4 traffic pass through IPv6 (server do the job). OpenVPN - because I want to configure VPN connection to server in my router (Asus RT-N16?). How can I achieve this?

    Read the article

  • "Unable to open MRTG log file" error with nagios and mrtg

    - by Simone Magnaschi
    We have a strange issue with our setup of icinga / nagios and mrtg. Icinga is working great and has no problem, it can monitor basically everything without issues. We setup mrtg to gather bandwith data from our routers and switches. MRTG is working fine: it stores the log data in the /var/www/mrtg/ directory and displays the graph data via web. We assume so MRTG is doing great. We tried to setup bandwidth checks in nagios: define service{ use generic-service ; Inherit values from a template host_name zywall-agora service_description ZYWALL AGORA TRAFFICO check_command check_local_mrtgtraf!/var/www/mrtg/x.x.x.x_2.log!AVG!1000000,2000000!5000000,5000000!1000 check_interval 1 ; Check the service every 1 minute under normal conditions retry_interval 1 ; Re-check every minute until its final/hard state is determined } Where /var/www/mrtg/x.x.x.x_2.log is the correct log path file. We keep on getting Unable to open MRTG log file error in the test result in icinga web interface. We tried everything: give ownership to user nagios or icinga to the log file give chmod 777 to the file try to copy the file in another directory and give it full permission Same error. The strange thing is that if we use the command that nagios generate in a bash session the command works like a charm: /usr/lib64/nagios/plugins/check_mrtgtraf -F /var/www/mrtg/x.x.x.x_2.log -a AVG -w 10,20 -c 5000000,5000000 -e 10 Result: Traffic WARNING - Avg. In = 17.9 KB/s, Avg. Out = 5.0 KB/s|in=17.877930KB/s;10.000000;5000000.000000;0.000000 out=5.000000KB/s;20.000000;5000000.000000;0.000000 We ran that command line as root, as user nagios and as user icinga and all three worked ok. We thought that the command that nagios perform maybe has something wrong in it, so we debugged nagios but we found out that the generated command from nagios is the same as above. Searching on google for these kind of problem returns only issues of systems where mrtg is not installed or issues with the wrong path to the log file, but these seems not to be our case. We are stuck, can somebody help?

    Read the article

  • Dovecot install: what does this error mean?

    - by jamie
    I have postfix and dovecot installed on CentOS 6 (linode) along with MySQL. The table and user is already set up, postfix installed fine, but dovecot gives me this error in the mail log: Warning: Killed with signal 15 (by pid=9415 uid=0 code=kill) The next few lines say this: Apr 7 16:13:35 dovecot: master: Dovecot v2.0.9 starting up (core dumps disabled) Apr 7 16:13:35 dovecot: config: Warning: NOTE: You can get a new clean config file with: doveconf -n > dovecot-new.conf Apr 7 16:13:35 dovecot: config: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:1: protocols=pop3s is no longer supported. to disable non-ssl pop3, use service pop3-login { inet_listener pop3 { p$ Apr 7 16:13:35 dovecot: config: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:5: ssl_cert_file has been replaced by ssl_cert = <file Apr 7 16:13:35 dovecot: config: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:6: ssl_key_file has been replaced by ssl_key = <file Apr 7 16:13:35 dovecot: config: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:8: namespace private {} has been replaced by namespace { type=private } Apr 7 16:13:35 dovecot: config: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:24: add auth_ prefix to all settings inside auth {} and remove the auth {} section completely Apr 7 16:13:35 dovecot: config: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:25: auth_user has been replaced by service auth { user } I am following directions for the install on CentOS 5 with changes in the dovecot.conf file from different sources specific to CentOS 6. So the dovecot.conf file might not be correct, but there is no good source I have found yet for making dovecot install correctly. Can anyone tell me what the error above means? The terminal does not give any message as to start OK or FAIL. When I issue the service dovecot start command, it says: Starting Dovecot Imap: and nothing more.

    Read the article

  • HowTo import Certificate (pfx) with private key in WinXP

    - by Gunther
    Hello, I tried the whole day just to import a cetrificate in winXP, but I allways failed. I did following: Create the certificate with private key (no pasword): makecert -sr LocalMachine -ss My -pe -sky exchange -n "CN=TestCert" -a sha1 -sv TestCert.pvk TestCert.cer Then put certificate and private key together into pfx file: pvk2pfx.exe -pvk TestCert.pvk -spc TestCert.cer -pfx TestCert.pfx Import pfx file with commandline tool (German System): winhttpcertcfg.exe -i TestCert.pfx -a NT-AUTORITÄT\NETZWERKDIENST -c LOCAL_MACHINE\My Error: Unable to import contents of PFX file. Please make sure the filename and path, as well as the password, are correct. Hint: "NT-AUTORITÄT\NETZWERKDIENST" -- "NT-AUTHORITY\NETWORKSERVICE" Filename is ok, password was not set. Even if I set the password (e.g. "MyPassword") in Step 1 and type at the end of step 3: ... -p MyPassword I got the same error. Then I tried to import in the certificate console (mmc with certificate snap-in). There i got following error: "Der private Schlüssel, den Sie importieren, erfordert möglicherweise einen Dienstanbieter, der nicht installiert ist." -- "The imported private key may requires a service-supplier which is not installed". But the Microsoft Crypto-Service is up and running. What else can I do? On Windows Vista and Windows 7 I got this running without these problems. I need this Certificate to run a WCF Service. Thanks in advance for any hint. Regards, Gunther

    Read the article

  • Postfix won't run while selinux in enforcing mode

    - by Dina Abu-khader
    I enabled selinux forcing mode on Fedora 15 , and I was able to get apache, mysql and memcached to work fine , but I couldn't get postfix to run . I got the following errors : systemd[1]: Unit postfix.service entered failed state. kernel: [146194.117602] type=1400 audit(1318924444.361:3809): avc: denied { module_request } for pid=15447 comm="postfix" kmod="net-pf-10" scontext=system_u:system_r:postfix_master_t:s0 tcontext=system_u:system_r:kernel_t:s0 tclass=system kernel: [146194.145456] type=1400 audit(1318924444.389:3810): avc: denied { module_request } for pid=15452 comm="master" kmod="net-pf-10" scontext=system_u:system_r:postfix_master_t:s0 tcontext=system_u:system_r:kernel_t:s0 tclass=system kernel: [146194.146585] type=1400 audit(1318924444.390:3811): avc: denied { module_request } for pid=15452 comm="master" kmod="net-pf-10" scontext=system_u:system_r:postfix_master_t:s0 tcontext=system_u:system_r:kernel_t:s0 tclass=system kernel: [146194.390715] type=1400 audit(1318924444.633:3812): avc: denied { module_request } for pid=15479 comm="postsuper" kmod="net-pf-10" scontext=system_u:system_r:postfix_master_t:s0 tcontext=system_u:system_r:kernel_t:s0 tclass=system kernel: [146194.451670] type=1400 audit(1318924444.694:3813): avc: denied { module_request } for pid=15516 comm="postlog" kmod="net-pf-10" scontext=system_u:system_r:postfix_master_t:s0 tcontext=system_u:system_r:kernel_t:s0 tclass=system kernel: [146194.459587] type=1400 audit(1318924444.702:3814): avc: denied { module_request } for pid=15517 comm="master" kmod="net-pf-10" scontext=system_u:system_r:postfix_master_t:s0 tcontext=system_u:system_r:kernel_t:s0 tclass=system kernel: [146194.460786] type=1400 audit(1318924444.703:3815): avc: denied { module_request } for pid=15517 comm="master" kmod="net-pf-10" scontext=system_u:system_r:postfix_master_t:s0 tcontext=system_u:system_r:kernel_t:s0 tclass=system systemd[1]: PID 15517 read from file /var/spool/postfix/pid/master.pid does not exist. Your service or init script might be broken. systemd[1]: postfix.service: main process exited, code=exited, status=1 following steps were done : I reinstall postfix Created .autorelable and reboot restorecon -R -v /etc/postfix restorecon -R -v /var/lib/postfix Can someone tell me what am doing wrong ? Update It turns out that we have to disable the ipv6 in the main.cf and these errors were disappear. THank you

    Read the article

  • Occasional "Could not load file or assembly" in asmx WebService on IIS and DFS

    - by user8804
    We have a handfull of ASMX web service hosted on two identical Windows Server 2003 boxes. The virtual directory for the web services is loaded in a DFS share, both servers point to the same share. We have a load balancer between the internet and the two web servers. At a seemingly random interval (right now about twice per week) when a user tries to access a method on the web service, IIS returns the error: "Could not load file or assembly" for one of the assemblies used in the method call, and will continue reporting it each time the method is called until the app pool is recycled. We haven't found any distinguishable pattern to the problem. This is what I know: the missing assembly varies (but it's always a home-brew assembly) the Web Service method that fails varies there is no noticeable pattern to the times or intervals where the problem appears there are no admin users accessing the servers when the problem appears the failing method will work correctly on one server and fail on the other, even though both point to the same bin folder the problem can always be corrected by recycling the app pool and making no other changes I have enabled the Assembly Binder Log, and know that the binder is looking in the correct location for the file. Our assemblies are compiled for .Net 3.5.

    Read the article

  • Why are my Windows 7 updates continuously failing?

    - by Chris C.
    I'm an advanced level user here with an odd issue. I have two Windows Updates that are failing to install, every single time. I'm getting a mysterious "Code 1" error on both updates, an error for which I'm having difficulty finding a solution. The updates in question are: Security Update for Microsoft Visual C++ 2008 Service Pack 1 Redistributable Package (KB2538243) System Update Readiness Tool for Windows 7 for x64-based Systems (KB947821) [May 2011] Because these updates are failing, the Shut Down button in my start menu always has the shield icon next to it, indicating that "new" updates will be installed on shut down. But, of course, they'll fail and when the PC is restarted, the shield icon is still there. When checking the update history and viewing the details of the failed updates, I get the following: Security Update for Microsoft Visual C++ 2008 Service Pack 1 Redistributable Package (KB2538243) Installation date: ?6/?29/?2011 3:00 AM Installation status: Failed Error details: Code 1 Update type: Important A security issue has been identified leading to MFC application vulnerability in DLL planting due to MFC not specifying the full path to system/localization DLLs. You can protect your computer by installing this update from Microsoft. After you install this item, you may have to restart your computer. More information: http://go.microsoft.com/fwlink/?LinkId=216803 System Update Readiness Tool for Windows 7 for x64-based Systems (KB947821) [May 2011] Installation date: ?6/?28/?2011 3:00 AM Installation status: Failed Error details: Code 1 Update type: Important This tool is being offered because an inconsistency was found in the Windows servicing store which may prevent the successful installation of future updates, service packs, and software. This tool checks your computer for such inconsistencies and tries to resolve issues if found. More information: http://support.microsoft.com/kb/947821 About My System I'm running Windows 7 Home Premium x64 Edition. This is a custom PC build and the OS was installed fresh, not an upgrade from a previous version. I've been running this system for about 4 months. Windows Updates aside, the system is usually quite stable. Thanks in advance for your help!

    Read the article

  • Sharepoint db issue after DB move to SQL 08

    - by JohnyV
    Recently we have moved our sharepoint 2007 db from sql 2000 server to 2008 x64 SQL server. All seems well, however there is a problem where the sql server stops running and the service has to be restarted. The errors mention insufficient internal memory etc. I have tried to start the db using -g384 which is the default in sql 2000 but 256 is default for 2008 I believe. This has not rectified the issue. I was advised that perhaps the issue may be rectified by upgrading to wss 3.0 sp2 however When I have tried to install this i get another error post sp2 update and have to refer back to a vm snapshot. The error after the service pack is Server error: http://go.microsoft.com/fwlink?LinkID=96177 So I guess I have a few questions How can I fix the first issue and the 2nd issue. I have checked out many forums and posts and have tried a few things and still get no joy. Any assistance would be great. UPDATE I have fixed the Server error: http://go.microsoft.com/fwlink?LinkID=96177 the i needed to run the wss sp2 as well as the office servers sp2 then the config wizard then the moss configuration worked. The errors I am getting in SQL are SQL Server was unable to run a new system task, either because there is insufficient memory or the number of configured sessions exceeds the maximum allowed in the server. Verify that the server has adequate memory. Use sp_configure with option 'user connections' to check the maximum number of user connections allowed. Use sys.dm_exec_sessions to check the current number of sessions, including user processes. A read operation on a large object failed while sending data to the client. A common cause for this is if the application is running in READ UNCOMMITED isolation level. The connection will be terminated. There is insufficient system memory in resource pool 'internal' to run this query. These errors are by a user that was created as a service for sharepoint.

    Read the article

  • Software to view metadata of an ISO file?

    - by netvope
    I have been searching for the list of metadata field of an ISO file on Google but couldn't find anything. That made me think that there isn't any metadata in an ISO file, just the files content and their properties. However, today I find in ImgBurn that there is a field called Imp ID, which typically contains the software used to create the ISO file. I'm not sure if it is specific to the UDF and/or CDFS filesystem. What are the other possible metadata fields in an ISO file? What software may I use to see them?

    Read the article

  • getting "No LoginModules configured" for JAAS login under WebSphere security domain

    - by user1739040
    I have a JAX-RPC web service running on WebSphere V7. It requires a UserNameToken for security. I have a custom login module (MyLoginModule) which extracts the username and password, and that module is defined as a JAAS application login in the websphere admin console. Using IBM RAD 8.0, I have bound the token consumer to the login module using the JAAS config name of the module. This all works fine and happy on my development server. Now I realize, that for deployment to another server, I am required to move the JAAS login from global security to a security domain. When I do that, it breaks my web service. I get this SOAP Fault message: com.ibm.wsspi.wssecurity.SoapSecurityException: WSEC6520E: Construction of the login context failed. The exception is : javax.security.auth.login.LoginException: No LoginModules configured for MyLoginModule According to the IBM docs: The JAAS application logins, the JAAS system logins, and the JAAS J2C authentication data aliases can all be configured at the domain level. By default, all of the applications in the system have access to the JAAS logins configured at the global level. The security runtime first checks for the JAAS logins at the domain level. If it does not find them, it then checks for them in the global security configuration. Configure any of these JAAS logins at a domain only when you need to specify a login that is used exclusively by the applications in the security domain. So I am looking to make sure my application is in the domain, and I have tried everything I can think of. (I have assigned the domain to "all scopes", to the entire cell, etc.) No luck, I keep getting the same error response to my web service client. Any help or hints are appreciated.

    Read the article

  • Why does my Belkin wireless router has eMule port open?

    - by Jeremy Powell
    I have a Belkin F6D4230-4 v1 router. When I port scan it with nmap I get the following: $ sudo nmap -sS -A -T5 192.168.2.1 -p- Starting Nmap 5.00 ( http://nmap.org ) at 2010-04-17 11:40 CDT Interesting ports on 192.168.2.1: Not shown: 65532 closed ports PORT STATE SERVICE VERSION 80/tcp open http Belkin 2307 wifi router http config (IP_SHARER httpd 1.0) |_ html-title: '+i1+' 4661/tcp filtered unknown 4662/tcp filtered edonkey MAC Address: 00:22:75:5D:52:D8 (Belkin International) Device type: WAP|broadband router|firewall|printer|specialized|webcam Running (JUST GUESSING) : Linksys embedded (95%), TRENDnet embedded (95%), Netgear embedded (92%), Canon embedded (89%), On Time RTOS (89%), Symantec embedded (89%), D-Link embedded (86%), Polycom embedded (85%) Aggressive OS guesses: Linksys WRT54GC or TRENDnet TEW-431BRP wireless broadband router (95%), TRENDnet TW100-BRF114 broadband router (95%), Netgear FR114P ProSafe VPN firewall (92%), Canon PIXMA MX850 printer (89%), On Time RTOS (89%), Symantec Firewall/VPN 100 (89%), D-Link DI-714P+ wireless broadband router (86%), Polycom ViewStation video conferencing system (85%) No exact OS matches for host (test conditions non-ideal). Network Distance: 1 hop Service Info: Device: WAP OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ . Nmap done: 1 IP address (1 host up) scanned in 21.57 seconds Why are the 4461 and 4462 ports open? This is a basic, out-of-the-box installation.

    Read the article

  • How to avoid intrusion detection/anti spoofing issue on a sonicwall TZ series FW

    - by Ian
    We have a sonicwall tz series FW with two internet service providers connected. One of the providers has a wireless service which works a bit like an ethernet switch in that we have an ip with a /24 subnet and the gateway is .1. All other clients on the same subnet (say 195.222.99.0) have the same .1 gateway - this is important, read on. Some of our clients are also on the same subnet. Our config: X0 : Lan X1 : 89.90.91.92 X2 : 195.222.99.252/24 (GW 195.222.99.1) X1 and X2 are not connected, other than both being connected to the public Internet. Client config: X1 : 195.222.99.123/24 (GW 195.222.99.1) What fails, what works: Traffic 195.222.99.123 (client) <- 89.90.91.92 (X1) : Spoof alert Traffic 195.222.99.123 (client) <- 195.222.99.252 (X1) : OK - no spoof alert I have several clients with IPs in the 195.222.99.0 range and all provoke identical alerts. This is the alert I see on the FW: Alert Intrusion Prevention IP spoof dropped 195.222.99.252, 21475, X1 89.90.91.92, 80, X1 MAC address: 00:12:ef:41:75:88 Anti-spoofing is switched off on my FW (network-mac-ip-anti-spoofing - config for each interface) for all ports I can provoke the alerts by telneting to a port on X1 from the clients. You can't argue with the logic - this is suspicious traffic. X1 is receiving traffic with a source IP which corresponds to X2s subnet. Anyone know how can I tell the FW that packets with a src subnet of 195.222.99.0 can legitimately appear on X1? I know whats going wrong, I've seen the same thing before, but with higher end FWs you can avoid this with a few extra rules. I can't see how to do this here. And before you ask why we're using this service provider - they give us 3ms (yep 3ms, thats not an error) delay between routers.

    Read the article

  • How do I get a hold of the Reply-To header and remunge it in postfix

    - by Mikhail
    I have a legacy application that emails via php. 5% of the emails aren't going through. The solution is to route all email through a fancy verified mail server like Amazon's SES. I am having some trouble implementing this functionality. It seems this guy had a similar problem. My question is where in postfix can I set a filter that will take as input the the message headers, so that I can manually set the From field and the Reply-To field to [email protected] and [email protected], respectively. Where whatever_php_wants is dictated by the php program and the users registration email. I know where to set the noreply portion, but I don't know the exact place in postfix's configuration files where I can intercept complete emails and pass them to a script. Edit So I want emails to look like: FROM: [email protected] REPLY-TO: the_users_address@their_email_service.com

    Read the article

  • How to Creat custom content for nginx error 502 page, keep origin url on browser

    - by user123862
    i'm trying to get custom language and message for nginx error page but keep url on browser.. not success for eg: i go to url : xaluan.com/aaa/bbb.html on the time server down.. nginx will show error 502. with the same url but custom message as my language. test 1. I created a custom page at /usr/local/nginx/html/205.html as following config but it show on web site when error is default nginx error at domain.com/50.html ( the content of webpage not same as i created) error_page 502 /502.html; location = /502.html { root /usr/local/nginx/html; } test 2. Then i create same page at my www domain folder /home/xaluano/public_html/502.html but this keep redirect me to root domain.com/502.html the content now same as i created. but.. the url still not as i need error_page 502 /502.html; location = /502.html { root /home/xaluano/public_html; internal; } EDIT UPDATE for more detail 10/06/2012 please download my nginx config http://pastebin.com/7iLD6WQq and vhost config following: http://pastebin.com/ZZ91KiY6 == the case test.. if apache httpd service stop: #service httpd stop then open browser go to: xaluan.com/modules.php?name=News&file=article&sid=123456 I will see the 502 error with the same url on browser address == Custome error page I need the config which help when apache fail .. will show the custom message tell user wail for 1 minute for service back then refress current page with same url ( refresh I can do easy by javascript ), Nginx dosent change url so java-script can work out. any help will be great.. thank in advance

    Read the article

  • Integration of SharePoint 2010 with TFS2010

    - by Kabir Rao
    We have performed following steps as of now- Install TFS2010 10.0.30319.1 (RTM) on Windows Server 2008 R2 Enterprise(app tier) SQL 2008 SP1 with Cumulative update 2 on Windows Server 2008 R2 Enterprise(data tier) Reporting Service is installed on app tier. After this installation worked fine we installed SharePoint 2010 on app tier. After installation we followed http://blogs.msdn.com/b/team_foundation/archive/2010/03/06/configuring-sharepoint-server-2010-beta-for-dashboard-compatibility-with-tfs-2010-beta2-rc.aspx for configuration. We are not able to perform the last step described in the link as following error occured- TF249063: The following Web service is not available: http://apptier:31254/_vti_bin/TeamFoundationIntegrationService.asmx. This Web service is used for the Team Foundation Server Extensions for SharePoint Products. The underlying error is: The remote server returned an error: (404) Not Found.. Verify that the following URL points to a valid SharePoint Web application and that the application is available: http://apptier:31254. If the URL is correct and the Web application is operating normally, verify that a firewall is not blocking access to the Web application. We have also noticed that Document Folder in Team project also have red x. Please help. Thanks upfront.

    Read the article

  • "Cannot perform a differential backup for database "myDb", because a current database backup does no

    - by krimerd
    Hi there, I have what seems to be a pretty common problem when trying to take a differential backup. We have a SQL Server 2008 Standard (64bit) and we use Litespeed v 5.0.2.0 to take our backups. We take full backups once a week and a differential on a daily basis. The problem is, every time I try to take a diff backup I get the following error: "VDI open failed due to requested abort. BACKUP DATABASE is terminating abnormally. Cannot perform a differential backup for database "myDb", because a current database backup does not exist. Perform a full database backup by reissuing BACKUP DATABASE, omitting the WITH DIFFERENTIAL option." The problem is that I know 100% I have a full backup because I just double checked. Only once I was able to take a diff backup and that was when I took it immediately after I took a full backup. I have searched around and noticed that this is pretty common (although mostly with SQL 2005) and a solution that a lot of ppl suggest and that I haven't tried yet is to disable the SQL Server VSS Writer service. The problem with this is #1 I think I might need this service since I am using a third party backup software and #2 I am not sure exactly what the service does and don't want to disable it just like that. Has any of you ever experienced this problem and how did you go about fixing it? Thank you,

    Read the article

  • Occasional "Could not load file or assembly" in asmx WebService on IIS and DFS

    - by jesse-mcdowell
    We have a handfull of ASMX web service hosted on two identical Windows Server 2003 boxes. The virtual directory for the web services is loaded in a DFS share, both servers point to the same share. We have a load balancer between the internet and the two web servers. At a seemingly random interval (right now about twice per week) when a user tries to access a method on the web service, IIS returns the error: "Could not load file or assembly" for one of the assemblies used in the method call, and will continue reporting it each time the method is called until the app pool is recycled. We haven't found any distinguishable pattern to the problem. This is what I know: the missing assembly varies (but it's always a home-brew assembly) the Web Service method that fails varies there is no noticeable pattern to the times or intervals where the problem appears there are no admin users accessing the servers when the problem appears the failing method will work correctly on one server and fail on the other, even though both point to the same bin folder the problem can always be corrected by recycling the app pool and making no other changes I have enabled the Assembly Binder Log, and know that the binder is looking in the correct location for the file. Our assemblies are compiled for .Net 3.5.

    Read the article

  • SQL Server Express Failed to Install

    - by JasCav
    I am attempting to install SQL Server Express (as part of the Visual Studio 2010 Professional installation), but it is failing. I am receiving this error log. [06/22/11,16:31:39] Microsoft Visual Studio 2010 Professional - ENU: [2] UpdateFileFetcherFromMsi: Warning: Missing fwlink entry for cabinet: #SP.cab [06/22/11,16:31:40] setup.exe: [2] Duplicate module ID: {0AFE11CA-57AA-4F66-90BE-284F0F3A5ABD} [06/22/11,16:32:12] setup.exe: [2] Duplicate component in install order: SQL EULAs [06/22/11,16:32:12] setup.exe: [2] Duplicate component in install order: SQL EULAs [06/22/11,16:32:12] setup.exe: [2] Duplicate component in install order: SQL EULAs [06/22/11,17:07:55] Microsoft Visual Studio 2010 Professional - ENU: [2] UpdateFileFetcherFromMsi: Warning: Missing fwlink entry for cabinet: #SP.cab [06/22/11,17:07:55] setup.exe: [2] Duplicate module ID: {0AFE11CA-57AA-4F66-90BE-284F0F3A5ABD} [06/23/11,10:39:33] Microsoft Visual Studio 2010 Professional - ENU: [2] UpdateFileFetcherFromMsi: Warning: Missing fwlink entry for cabinet: #SP.cab [06/23/11,10:39:33] setup.exe: [2] Duplicate module ID: {0AFE11CA-57AA-4F66-90BE-284F0F3A5ABD} [06/23/11,10:40:22] setup.exe: [2] Duplicate component in install order: SQL EULAs [06/23/11,10:40:22] setup.exe: [2] Duplicate component in install order: SQL EULAs [06/23/11,10:40:22] setup.exe: [2] Duplicate component in install order: SQL EULAs [06/23/11,10:53:48] Microsoft Visual Studio 2010 Professional - ENU: [2] UpdateFileFetcherFromMsi: Warning: Missing fwlink entry for cabinet: #SP.cab [06/23/11,10:53:48] setup.exe: [2] Duplicate module ID: {0AFE11CA-57AA-4F66-90BE-284F0F3A5ABD} [06/23/11,13:19:26] Microsoft Visual Studio 2010 Professional - ENU: [2] UpdateFileFetcherFromMsi: Warning: Missing fwlink entry for cabinet: #SP.cab [06/23/11,13:19:26] setup.exe: [2] Duplicate module ID: {0AFE11CA-57AA-4F66-90BE-284F0F3A5ABD} [06/23/11,16:47:36] Microsoft SQL Server 2008 Express Service Pack 1 (x64): [2] Error code -2068643839 for this component is not recognized. [06/23/11,16:47:36] Microsoft SQL Server 2008 Express Service Pack 1 (x64): [2] Component Microsoft SQL Server 2008 Express Service Pack 1 (x64) returned an unexpected value. ***EndOfSession*** I'm reading various articles which point towards something being wrong in the register, but I can't find anything specific. Any suggestions for what I can do to fix this?

    Read the article

  • Bind9 zone files

    - by user42780
    Well for the better part of the last two hours I've tried to figure out what is actually wrong, but I can't seem to find anything obvious to me. What I'm trying to do is setup my DNS for say(per example) domain.com. This should include two NS records, namely ns1.domain.com and ns2.domain.com. With that there should be a mail record, as well as a CNAME record for www. I've been trough roughly 20 how to's in the last two hours, rewrote everything from scratch four times and I still can't seem to find whats wrong. My only suspicion to this might be two things; the error I get from the bind9 daemon when I stop the service, and the named.conf file. The error I get from the bind9 daemon when stopping the service is: * Stopping domain name service... bind9 rndc: connection to remote host closed This may indicate that * the remote server is using an older version of the command protocol, * this host is not authorized to connect, * the clocks are not syncronized, or * the key is invalid. I honestly doesn't know what this means, apart from the key defined in /etc/bind/rndc.key that's not in the named.conf file(yes, I did try to add it to no avail). Here's all the zone files, and configuration files; http://208.77.101.5/bind9/ If anyone could help, it would be greatly appreciated.

    Read the article

  • How to make the start menu finds a program based on a custom keyword?

    - by Pierre-Alain Vigeant
    I am searching for a way to type a keyword in the start menu Search programs and files field and that it will return the application that match the keyword. An example will better explain this: Suppose that I want to start the powershell. Currently what I can type in the search field is power and the first item that appear is the 64bits powershell shortcut. Now suppose that I'd like ps to return powershell as the first item of the search list. Currently, typing ps return all files with the .ps extension, alongs with a control panel options about recording steps but not the powershell executable itself. How can I do that?

    Read the article

  • Enabling Hyper-V Integrated Services Time Sync Services versus Internet Time Synchronization

    - by cpuguru
    Should I deselect the "Synchronize with an Internet Time Server" checkbox under the VM's "Date and Time - Internet Time Settings" tab if the "Time Synchronization Service" for a Hyper-V-based Virtual Machine is enabled? One of the Integration Services that Hyper-V provides is the Time Synchronization Service, which can be enabled/disabled by going to a VM's Settings-Integration Services setting in the Management section. I believe this is checked by default. When you install a Windows Server 2008 OS in a VM on the Hyper-V server, it comes with the "Synchronize with an Internet Time Server" option set, pointing to "time.windows.com". I'd think that if the parent Hyper-V server is set to one time server, and the child VM is pointing to a different time server, there would be a momentary blip if the two are not spot on with their times when the synchronization services run. So the question is, which time sync service should I use? I'm assuming not both. And what is the advantage of one over the other? Note: This question assumes that the machines are not joined to a domain. If they were, the machines would also try to update their time against the domain controller with the primary domain controller role too, right? Thanks!

    Read the article

  • Need help making an ODBC MySQL Connection

    - by Andy Moore
    Short Version: How do I connect from PowerShell to an ODBC 5.1 MySQL Driver? I can't seem to find any connection strings that accurately have a "Provider" field for this particular instance. (See bottom of this question for examples/errors) ===== Long Version: I'm not a server guy, and I've been handed the task of setting up PowerGadgets on our network. I have a MySQL server running on a Linux box, that is configured for remote access and has a user defined for remote access as well. On my windows desktop PC, I have PowerGadgets installed. I installed the MySQL ODBC 5.1 connector, and went to Control Panel Data Sources and set up a User DSN connection to the database. The connection, user, and pass seem to be correct because it lists the tables of the database in my windows control panel. Where I'm running into trouble is in 3 places in PowerGadgets: When selecting a data source, I can select "SQL Server". Inputting the servers IP address does not work and I can't get this option to work at all. When selecting a data source, I can select "OleDB". This screen has a wizard on it, that appears to populate all the correct information (including database table names!) for me. "Test Connection" runs great. But if I try to complete the wizard, I get the error "The .NET Framework data provider for OLEDB does not support the MS Ole DB provider for ODBC Drivers." When selecting a data source, I can select "ODBC". This screen does not have a wizard and I cannot figure out a "connection string" that works. Typically it will respond with the error "The field 'Provider' is missing". Googling ODBC connection strings doesn't reveal any examples with a "provider" field and have no idea what to put in here. The connection string (for #2) above contains "SQLOLEDB" as a provider, and upon inputting that value into this connection string I get the same connection error that #2 gets. I believe I can solve my problems by figuring out a connection string for #3 but don't know where to get started. (PowerGadgets also allows for PowerShell support but I believe I will run into the same problem there) == Here's my current PowerShell connection that doesn't work: invoke-sql -connection "Driver={MySQL ODBC 5.1 Driver};Initial Catalog=hq_live;Data Source=HQDB" -sql "Select * FROM accounts" Spits back the error: "Invoke-Sql : An OLE DB Provider was not specified in the ConnectionString. An example would be, 'Provider=SQLOLEDB;'. == Another string that doesn't work: invoke-sql -connection "Provider=MSDASQL.1;Persist Security Info=False;Data Source=HQDB;Initial Catalog=hq_live" -sql "select * from accounts" And the error: The .Net Framework Data Provider for OLEDB (System.Data.OleDb) does not support the Microsoft OLE DB Provider for ODBC Drivers (MSDASQL). Use the .Net Framework Data Provider for ODBC (System.Data.Odbc).

    Read the article

  • Add bookmarks to Delicious and Google Bookmarks at the same time

    - by BrianH
    I have used delicious.com (or back then, del.icio.us) to store my bookmarks for a long time now, and I love it. I was looking through some of my Google services, and realized they have a bookmarking service that integrates with your Google searches (I thought they had a bookmarking service before, but it went away? Maybe not). I like delicious just fine - I'm not interested in leaving. But I also like how my Google bookmarks are highlighted (and I'm guessing, brought to the top) in my search results so I can easily tell if I've bookmarked a site (kind of like the "promote up" feature). I can't even count the number of times I search for a site only to find I've been there months or years ago. If sites I've bookmarked in the past are highlighted in my search results, it makes it easier to pick which search result to go to. My question is around bookmarking tools: Is there a bookmarklet or Firefox addon that will let me save a bookmark to multiple services at the same time, in this case, Google and Delicious? Or maybe a service to sync my delicious bookmarks to Google bookmarks on a regular basis? I have used the Delicious addon since the beginning - it would just be nice to add a bookmark to multiple services with 1 addon. For that matter, it would be nice to add Evernote into the mix - click 1 button to save the page to Evernote, and bookmark the page in Google and delicious. EDIT on 7/30/2009 - Summary: A proposed solution is to use the Delicious addon and the GMarks addon to keep the 2 services in sync. I was not able to get the 2 addons to keep everything in sync, so it was also suggest to use the Google Toolbar with the Delicious addon to keep everything in sync. I personally have reservations with letting Google know about every single site I visit, I believe this solution will work, so I am accepting it as the answer. I still wish there was a solution that would let you post a bookmark/page to multiple services at the same time (delicious, google, evernote, digg, diigo, etc.). Thanks!

    Read the article

  • Biztalk 2009 logshipping with SQL 2008

    - by Manjot
    Hi, I am setting up biztalk logshipping for Biztalk 2009 database. Following http://msdn.microsoft.com/en-us/library/aa560961.aspx article, I am doing the following to setup biztalk logshipping on destination server: Enable Ad-hoc queries by: sp_configure 'show advanced options',1 go reconfigure go sp_configure 'Ad Hoc Distributed Queries',1 go reconfigure go sp_configure 'show advanced options',0 go reconfigure go Execute LogShipping_Destination_Schema & LogShipping_Destination_Logic in master on destinations server Run: exec bts_ConfigureBizTalkLogShipping @nvcDescription = '', @nvcMgmtDatabaseName = '', @nvcMgmtServerName = '', @SourceServerName = null, -- null indicates that this destination server restores all databases @fLinkServers = 1 -- 1 automatically links the server to the management database When I run this I am receiving the following error: Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. After some research I found some info : Usually this error means that the SQL Server Service Principal Name (SPN) was not configured, and NTLM was not being used as an authentication mechanism. SQl services are runing under different domain accounts. So, I asked the domain admin to create SPNs for the servers, SQL service accounts for beoth source and destination using name and FQDN. enabled computer name and service accounts for delegation. When I run the following: select * from sys.dm_exec_connections I get the the same error: Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON' Any help please?

    Read the article

  • How often is CRL refreshed, and how to force it to be?

    - by lockstock
    I have a web service running under IIS 7 that requires an X509 client certificate. I know that the server that it rus on needs access to DigiCert.com in order to be able to get the CRL (Certificate Revocation List). There is a need to change our proxy so I am attempting to investigate the impact of doing so. I have removed the global proxy settings using the command netsh winhttp proxy refesh, and also deleted the CRL cache using the command certutil -URLcache CRL delete. However, after doing this, all calls to the web service still succeed. This suggests to me that I am missing something here. So; If the CRL cache is cleared and the server has no way of refreshing the CRL, why do web service requets not return http 403?. I have been unable to find adequate information from googling nor from my colleagues. The reason I want it to fail is that I will not be confident that the new proxy settings work until I can see it broken first, if that makes sense. I would also like to be able to force the CRL to be refeshed in order to ensure that the new proxy settings work

    Read the article

< Previous Page | 409 410 411 412 413 414 415 416 417 418 419 420  | Next Page >