Search Results

Search found 27521 results on 1101 pages for 'remote control'.

Page 413/1101 | < Previous Page | 409 410 411 412 413 414 415 416 417 418 419 420  | Next Page >

• Recent improvements in Console Performance

  - by loren.konkus

  Recently, the WebLogic Server development and support organizations have worked with a number of customers to quantify and improve the performance of the Administration Console in large, distributed configurations where there is significant latency in the communications between the administration server and managed servers. These improvements fall into two categories: Constraining the amount of time that the Console stalls waiting for communication Reducing and streamlining the amount of data required for an update A few releases ago, we added support for a configurable domain-wide mbean "Invocation Timeout" value on the Console's configuration: general, advanced section for a domain. The default value for this setting is 0, which means wait indefinitely and was chosen for compatibility with the behavior of previous releases. This configuration setting applies to all mbean communications between the admin server and managed servers, and is the first line of defense against being blocked by a stalled or completely overloaded managed server. Each site should choose an appropriate timeout value for their environment and network latency. In the next release of WebLogic Server, we've added an additional console preference, "Management Operation Timeout", to the Console's shared preference page. This setting further constrains how long certain console pages will wait for slowly responding servers before returning partial results. While not all Console pages support this yet, key pages such as the Servers Configuration and Control table pages and the Deployments Control pages have been updated to support this. For example, if a user requests a Servers Table page and a Management Operation Timeout occurs, the table is displayed with both local configuration and remote runtime information from the responding managed servers and only local configuration information for servers that did not yet respond. This means that a troublesome managed server does not impede your ability to manage your domain using the Console. To support these changes, these Console pages have been re-written to use the Work Management feature of WebLogic Server to interact with each server or deployment concurrently, which further improves the responsiveness of these pages. The basic algorithm for these pages is: For each configuration mbean (ie, Servers) populate rows with configuration attributes from the fast, local mbean server Find a WorkManager For each server, Create a Work instance to obtain runtime mbean attributes for the server Schedule Work instance in the WorkManager Call WorkManager.waitForAll to wait WorkItems to finish, constrained by Management Operation Timeout For each WorkItem, if the runtime information obtained was not complete, add a message indicating which server has incomplete data Display collected data in table In addition to these changes to constrain how long the console waits for communication, a number of other changes have been made to reduce the amount and scope of managed server interactions for key pages. For example, in previous releases the Deployments Control table looked at the status of a deployment on every managed server, even those servers that the deployment was not currently targeted on. (This was done to handle an edge case where a deployment's target configuration was changed while it remained running on previously targeted servers.) We decided supporting that edge case did not warrant the performance impact for all, and instead only look at the status of a deployment on the servers it is targeted to. Comprehensive status continues to be available if a user clicks on the 'status' field for a deployment. Finally, changes have been made to the System Status portlet to reduce its impact on Console page display times. Obtaining health information for this display requires several mbean interactions with managed servers. In previous releases, this mbean interaction occurred with every display, and any delay or impediment in these interactions was reflected in the display time for every page. To reduce this impact, we've made several changes in this portlet: Using Work Management to obtain health concurrently Applying the operation timeout configuration to constrain how long we will wait Caching health information to reduce the cost during rapid navigation from page to page and only obtaining new health information if the previous information is over 30 seconds old. Eliminating heath collection if this portlet is minimized. Together, these Console changes have resulted in significant performance improvements for the customers with large configurations and high latency that we have worked with during their development, and some lesser performance improvements for those with small configurations and very fast networks. These changes will be included in the 11g Rel 1 patch set 2 (10.3.3.0) release of WebLogic Server.

  Read the article

• Building on someone else's DefaultButton Silverlight work...

  - by KyleBurns

  This week I was handed a "simple" requirement - have a search screen execute its search when the user pressed the Enter key instead of having to move hands from keyboard to mouse and click Search.  That is a reasonable request that has been met for years both in Windows and Web apps.  I did a quick scan for code to pilfer and found Patrick Cauldwell's Blog posting "A 'Default Button' In Silverlight".  This posting was a great start and I'm glad that the basic work had been done for me, but I ran into one issue - when using bound textboxes (I'm a die-hard MVVM enthusiast when it comes to Silverlight development), the search was being executed before the textbox I was in when the Enter key was pressed updated its bindings.  With a little bit of reflection work, I think I have found a good generic solution that builds upon Patrick's to make it more binding-friendly.  Also, I wanted to set the DefaultButton at a higher level than on each TextBox (or other control for that matter), so the use of mine is intended to be set somewhere such as the LayoutRoot or other high level control and will apply to all controls beneath it in the control tree.  I haven't tested this on controls that treat the Enter key special themselves in the mix. The real change from Patrick's solution here is that in the KeyUp event, I grab the source of the KeyUp event (in my case the textbox containing search criteria) and loop through the static fields on the element's type looking for DependencyProperty instances.  When I find a DependencyProperty, I grab the value and query for bindings.  Each time I find a binding, UpdateSource is called to make sure anything bound to any property of the field has the opportunity to update before the action represented by the DefaultButton is executed. Here's the code: public class DefaultButtonService { public static DependencyProperty DefaultButtonProperty = DependencyProperty.RegisterAttached("DefaultButton", typeof (Button), typeof (DefaultButtonService), new PropertyMetadata (null, DefaultButtonChanged)); private static void DefaultButtonChanged(DependencyObject d, DependencyPropertyChangedEventArgs e) { var uiElement = d as UIElement; var button = e.NewValue as Button; if (uiElement != null && button != null) { uiElement.KeyUp += (sender, arg) => { if (arg.Key == Key.Enter) { var element = arg.OriginalSource as FrameworkElement; if (element != null) { UpdateBindings(element); } if (button.IsEnabled) { button.Focus(); var peer = new ButtonAutomationPeer(button); var invokeProv = peer.GetPattern(PatternInterface.Invoke) as IInvokeProvider; if (invokeProv != null) invokeProv.Invoke(); arg.Handled = true; } } }; } } public static DefaultButtonService GetDefaultButton(UIElement obj) { return (DefaultButtonService) obj.GetValue(DefaultButtonProperty); } public static void SetDefaultButton(DependencyObject obj, DefaultButtonService button) { obj.SetValue(DefaultButtonProperty, button); } public static void UpdateBindings(FrameworkElement element) { element.GetType().GetFields(BindingFlags.Public | BindingFlags.Static).ForEach(field => { if (field.FieldType.IsAssignableFrom(typeof(DependencyProperty))) { try { var dp = field.GetValue(null) as DependencyProperty; if (dp != null) { var binding = element.GetBindingExpression(dp); if (binding != null) { binding.UpdateSource(); } } } // ReSharper disable EmptyGeneralCatchClause catch (Exception) // ReSharper restore EmptyGeneralCatchClause { // swallow exceptions } } }); } }

  Read the article

• Windows Azure Recipe: Consumer Portal

  - by Clint Edmonson

  Nearly every company on the internet has a web presence. Many are merely using theirs for informational purposes. More sophisticated portals allow customers to register their contact information and provide some level of interaction or customer support. But as our understanding of how consumers use the web increases, the more progressive companies are taking advantage of social web and rich media delivery to connect at a deeper level with the consumers of their goods and services. Drivers Cost reduction Scalability Global distribution Time to market Solution Here’s a sketch of how a Windows Azure Consumer Portal might be built out: Ingredients Web Role – this will host the core of the solution. Each web role is a virtual machine hosting an application written in ASP.NET (or optionally php, or node.js). The number of web roles can be scaled up or down as needed to handle peak and non-peak traffic loads. Database – every modern web application needs to store data. SQL Azure databases look and act exactly like their on-premise siblings but are fault tolerant and have data redundancy built in. Access Control (optional) – if identity needs to be tracked within the solution, the access control service combined with the Windows Identity Foundation framework provides out-of-the-box support for several social media platforms including Windows LiveID, Google, Yahoo!, Facebook. It also has a provider model to allow integration with other platforms as well. Caching (optional) – for sites with high traffic with lots of read-only data and lists, the distributed in-memory caching service can be used to cache and serve up static data at higher scale and speed than direct database requests. It can also be used to manage user session state. Blob Storage (optional) – for sites that serve up unstructured data such as documents, video, audio, device drivers, and more. The data is highly available and stored redundantly across data centers. Each entry in blob storage is provided with it’s own unique URL for direct access by the browser. Content Delivery Network (CDN) (optional) – for sites that service users around the globe, the CDN is an extension to blob storage that, when enabled, will automatically cache frequently accessed blobs and static site content at edge data centers around the world. The data can be delivered statically or streamed in the case of rich media content. Training Labs These links point to online Windows Azure training labs where you can learn more about the individual ingredients described above. (Note: The entire Windows Azure Training Kit can also be downloaded for offline use.) Windows Azure (16 labs) Windows Azure is an internet-scale cloud computing and services platform hosted in Microsoft data centers, which provides an operating system and a set of developer services which can be used individually or together. It gives developers the choice to build web applications; applications running on connected devices, PCs, or servers; or hybrid solutions offering the best of both worlds. New or enhanced applications can be built using existing skills with the Visual Studio development environment and the .NET Framework. With its standards-based and interoperable approach, the services platform supports multiple internet protocols, including HTTP, REST, SOAP, and plain XML SQL Azure (7 labs) Microsoft SQL Azure delivers on the Microsoft Data Platform vision of extending the SQL Server capabilities to the cloud as web-based services, enabling you to store structured, semi-structured, and unstructured data. Windows Azure Services (9 labs) As applications collaborate across organizational boundaries, ensuring secure transactions across disparate security domains is crucial but difficult to implement. Windows Azure Services provides hosted authentication and access control using powerful, secure, standards-based infrastructure. See my Windows Azure Resource Guide for more guidance on how to get started, including links web portals, training kits, samples, and blogs related to Windows Azure.

  Read the article

• Best Practices - Core allocation

  - by jsavit

  This post is one of a series of "best practices" notes for Oracle VM Server for SPARC (also called Logical Domains) Introduction SPARC T-series servers currently have up to 4 CPU sockets, each of which has up to 8 or (on SPARC T3) 16 CPU cores, while each CPU core has 8 threads, for a maximum of 512 dispatchable CPUs. The defining feature of Oracle VM Server for SPARC is that each domain is assigned CPU threads or cores for its exclusive use. This avoids the overhead of software-based time-slicing and emulation (or binary rewriting) of system state-changing privileged instructions used in traditional hypervisors. To create a domain, administrators specify either the number of CPU threads or cores that the domain will own, as well as its memory and I/O resources. When CPU resources are assigned at the individual thread level, the logical domains constraint manager attempts to assign threads from the same cores to a domain, and avoid "split core" situations where the same CPU core is used by multiple domains. Sometimes this is unavoidable, especially when domains are allocated and deallocated CPUs in small increments. Why split cores can matter Split core allocations can silenty reduce performance because multiple domains with different address spaces and memory contents are sharing the core's Level 1 cache (L1$). This is called false cache sharing since even identical memory addresses from different domains must point to different locations in RAM. The effect of this is increased contention for the cache, and higher memory latency for each domain using that core. The degree of performance impact can be widely variable. For applications with very small memory working sets, and with I/O bound or low-CPU utilization workloads, it may not matter at all: all machines wait for work at the same speed. If the domains have substantial workloads, or are critical to performance then this can have an important impact: This blog entry was inspired by a customer issue in which one CPU core was split among 3 domains, one of which was the control and service domain. The reported problem was increased I/O latency in guest domains, but the root cause might be higher latency servicing the I/O requests due to the control domain being slowed down. What to do about it Split core situations are easily avoided. In most cases the logical domain constraint manager will avoid it without any administrative action, but it can be entirely prevented by doing one of the several actions: Assign virtual CPUs in multiples of 8 - the number of threads per core. For example: ldm set-vcpu 8 mydomain or ldm add-vcpu 24 mydomain. Each domain will then be allocated on a core boundary. Use the whole core constraint when assigning CPU resources. This allocates CPUs in increments of entire cores instead of virtual CPU threads. The equivalent of the above commands would be ldm set-core 1 mydomain or ldm add-core 3 mydomain. Older syntax does the same thing by adding the -c flag to the add-vcpu, rm-vcpu and set-vcpu commands, but the new syntax is recommended. When whole core allocation is used an attempt to add cores to a domain fails if there aren't enough completely empty cores to satisfy the request. See https://blogs.oracle.com/sharakan/entry/oracle_vm_server_for_sparc4 for an excellent article on this topic by Eric Sharakan. Don't obsess: - if the workloads have minimal CPU requirements and don't need anywhere near a full CPU core, then don't worry about it. If you have low utilization workloads being consolidated from older machines onto a current T-series, then there's no need to worry about this or to assign an entire core to domains that will never use that much capacity. In any case, make sure the most important domains have their own CPU cores, in particular the control domain and any I/O or service domain, and of course any important guests. Summary Split core CPU allocation to domains can potentially have an impact on performance, but the logical domains manager tends to prevent this situation, and it can be completely and simply avoided by allocating virtual CPUs on core boundaries.

  Read the article

• Need WIF Training?

  - by Your DisplayName here!

  I spend numerous hours every month answering questions about WIF and identity in general. This made me realize that this is still quite a complicated topic once you go beyond the standard fedutil stuff. My good friend Brock and I put together a two day training course about WIF that covers everything we think is important. The course includes extensive lab material where you take standard application and apply all kinds of claims and federation techniques and technologies like WS-Federation, WS-Trust, session management, delegation, home realm discovery, multiple identity providers, Access Control Service, REST, SWT and OAuth. The lab also includes the latest version of the thinktecture identityserver and you will learn how to use and customize it. If you are looking for an open enrollment style of training, have a look here. Or contact me directly! The course outline looks as follows: Day 1 Intro to Claims-based Identity & the Windows Identity Foundation WIF introduces important concepts like conversion of security tokens and credentials to claims, claims transformation and claims-based authorization. In this module you will learn the basics of the WIF programming model and how WIF integrates into existing .NET code. Externalizing Authentication for Web Applications WIF includes support for the WS-Federation protocol. This protocol allows separating business and authentication logic into separate (distributed) applications. The authentication part is called identity provider or in more general terms - a security token service. This module looks at this scenario both from an application and identity provider point of view and walks you through the necessary concepts to centralize application login logic both using a standard product like Active Directory Federation Services as well as a custom token service using WIF’s API support. Externalizing Authentication for SOAP Services One big benefit of WIF is that it unifies the security programming model for ASP.NET and WCF. In the spirit of the preceding modules, we will have a look at how WIF integrates into the (SOAP) web service world. You will learn how to separate authentication into a separate service using the WS-Trust protocol and how WIF can simplify the WCF security model and extensibility API. Day 2 Advanced Topics:  Security Token Service Architecture, Delegation and Federation The preceding modules covered the 80/20 cases of WIF in combination with ASP.NET and WCF. In many scenarios this is just the tip of the iceberg. Especially when two business partners decide to federate, you usually have to deal with multiple token services and their implications in application design. Identity delegation is a feature that allows transporting the client identity over a chain of service invocations to make authorization decisions over multiple hops. In addition you will learn about the principal architecture of a STS, how to customize the one that comes with this training course, as well as how to build your own. Outsourcing Authentication:  Windows Azure & the Azure AppFabric Access Control Service Microsoft provides a multi-tenant security token service as part of the Azure platform cloud offering. This is an interesting product because it allows to outsource vital infrastructure services to a managed environment that guarantees uptime and scalability. Another advantage of the Access Control Service is, that it allows easy integration of both the “enterprise” protocols like WS-* as well as “web identities” like LiveID, Google or Facebook into your applications. ACS acts as a protocol bridge in this case where the application developer doesn’t need to implement all these protocols, but simply uses a service to make it happen. Claims & Federation for the Web and Mobile World Also the web & mobile world moves to a token and claims-based model. While the mechanics are almost identical, other protocols and token types are used to achieve better HTTP (REST) and JavaScript integration for in-browser applications and small footprint devices. Also patterns like how to allow third party applications to work with your data without having to disclose your credentials are important concepts in these application types. The nice thing about WIF and its powerful base APIs and abstractions is that it can shield application logic from these details while you can focus on implementing the actual application. HTH

  Read the article

• My collection of favourite TFS utilities

  - by Aaron Kowall

  So, you’re in charge of your company or team’s Team Foundation Server.  Wish it was easier to manage, administer, extend?  Well, here are a few utilities that I highly recommend looking at. I’ve recently had need to rebuild my laptop and upgrade my local TFS environment to TFS 2012 Update 1.  This gave me cause to enumerate some of the utilities I like to have on hand. One of the reasons I love to use TFS on projects is that it’s basically a complete ALM toolkit.  Everything from Task Management, Version Control, Build Management, Test Management, Metrics and Reporting are all there ‘in the box’.  However, no matter how complete a product set it, there are always ways to make it better.  Here are a list of utilities and libraries that are pretty generally useful.  this is not intended to be an exhaustive list of TFS extensions but rather a set that I recommend you look at.  There are many more out there that may be applicable in one scenario or another.  This set of tools should work with TFS 2012 or 2010 if you grab the right version. Most of these tools (and more) are available from the Visual Studio Gallery or CodePlex. General TFS Power Tools – This is ‘the’ collection of utilities and extensions delivered by the Product Group.  Highly recommended from here are the Best Practice Analyzer for ensuring your TFS implementation is healthy and the Team Foundation Server Backups to ensure your TFS databases are backed up correctly. TFS Administrators Toolkit – helps make updates to work item types and reports across many team projects.  Also provides visibility of disk usage by finding large files in version control or test attachments to assist in managing storage utilization. Version Control Git-TF - a set of cross-platform, command line tools that facilitate sharing of changes between TFS and Git. These tools allow a developer to use a local Git repository, and configure it to share changes with a TFS server.  Great for all Git lovers who must integrate into a TFS repository. Testing TFS 2012 Tester Power Tool – A utility for bulk copying test cases which assists in an approach for managing test cases across multiple releases.  A little plug that this utility was written and maintained by Anna Russo of Imaginet where I also work. Test Scribe - A documentation power tool designed to construct documents directly from the TFS for test plan and test run artifacts for the purpose of discussion, reporting etc. Reporting Community TFS Report Extensions - a single repository of SQL Server Reporting Services report for Team Foundation 2010 (and above).  Check out the Test Plan Status report by Imaginet’s Steve St. Jean.  Very valuable for your test managers. Builds TFS Build Manager – A great utility if you are build manager over a complex build environment with many TFS build definitions. Community TFS Build Extensions – contains many custom build activities.  Current release binaries are for TFS 2010 but many of the activities can be recompiled for use with TFS 2012. While compiling this list, I was surprised by the number of TFS utilities and extensions I no longer use/need in TFS 2012 because of the great work by the TFS team addressing many gaps since the 2010 release. Are there any utilities you depend on that I’ve missed?  I’d love to hear about them in the comments!

  Read the article

• Workarounds for supporting MVVM in the Silverlight ContextMenu service

  - by cibrax

  As I discussed in my last post, some of the Silverlight controls does not support MVVM quite well out of the box without specific customizations. The Context Menu is another control that requires customizations for enabling data binding on the menu options. There are a few things that you might want to expose as view model for a menu item, such as the Text, the associated icon or the command that needs to be executed. That view model should look like this, public class MenuItemModel { public string Name { get; set; } public ICommand Command { get; set; } public Image Icon { get; set; } public object CommandParameter { get; set; } } This is how you can modify the built-in control to support data binding on the model above, public class CustomContextMenu : ContextMenu { protected override DependencyObject GetContainerForItemOverride() { CustomMenuItem item = new CustomMenuItem(); Binding commandBinding = new Binding("Command"); item.SetBinding(CustomMenuItem.CommandProperty, commandBinding);   Binding commandParameter = new Binding("CommandParameter"); item.SetBinding(CustomMenuItem.CommandParameterProperty, commandParameter);   return item; } }   public class CustomMenuItem : MenuItem { protected override DependencyObject GetContainerForItemOverride() { CustomMenuItem item = new CustomMenuItem();   Binding commandBinding = new Binding("Command"); item.SetBinding(CustomMenuItem.CommandProperty, commandBinding);   return item; } } The change is very similar to the one I made in the TreeView for manually data binding some of the Menu item properties to the model. Once you applied that change in the control, you can define it in your XAML like this. <toolkit:ContextMenuService.ContextMenu> <e:CustomContextMenu ItemsSource="{Binding MenuItems}"> <e:CustomContextMenu.ItemTemplate> <DataTemplate> <StackPanel Orientation="Horizontal" > <ContentPresenter Margin="0 0 4 0" Content="{Binding Icon}" /> <TextBlock Margin="0" Text="{Binding Name, Mode=OneWay}" FontSize="12"/> </StackPanel> </DataTemplate> </e:CustomContextMenu.ItemTemplate> </e:CustomContextMenu> </toolkit:ContextMenuService.ContextMenu> The property MenuItems associated to the “ItemsSource” in the parent model just returns a list of supported options (menu items) in the context menu. this.menuItems = new MenuItemModel[] { new MenuItemModel { Name = "My Command", Command = new RelayCommand(OnCommandClick), Icon = ImageLoader.GetIcon("command.png") } }; The only problem I found so far with this approach is that the context menu service does not support a HierarchicalDataTemplate in case you want to have an hierarchy in the context menu (MenuItem –> Sub menu items), but I guess we can live without that.

  Read the article

• Web Services Example - Part 1: Declarative

  - by Denis T

  In this edition of the ADF Mobile blog we'll tackle part 1 of our Web Service examples. In this posting we'll take a look at using a declarative SOAP Web Service. Getting the sample code: Just click here to download a zip of the entire project. You can unzip it and load it into JDeveloper and deploy it either to iOS or Android. Please follow the previous blog posts if you need help getting JDeveloper or ADF Mobile installed. Defining our Web Service: First off, we should mention that this sample code is using a public web service provided free by CDYNE Corporation that provides weather forecasts by zipcode. Sometimes this service goes down so please ensure you know it's up before reporting this example isn't working. Let's take a look at the web service.  We created this by using the "Web Service Data Control" from the New Gallery and using this link to this wsdl:  "http://wsf.cdyne.com/WeatherWS/Weather.asmx?WSDL"   This web service has several methods but we're interested in GetCityForecastByZIP which takes a single string parameter for the zipcode and the second method, GetWeatherInformation that enumerates all possible forecast descriptions and associated image URLs.  The latter we'll use in the next edition but we included it here for completeness. Defing the Application: After adding a feature to the adfmf-feature.xml file, we added a taskflow to host the application flow.  This comprises of a home screen with a list with items for each method in the web service, "Forecast by Zip" and "Weather Info".  In this application we've also decided to hide the navigation bar since there is only one feature in the application. Forecast by Zip: The "Forecast By ZIP" option first presents the user with a screen where they can enter a zipcode and when the "Search" button is tapped, it executes the GetCityForecastByZIP method.  This is done by binding an Action binding to that method. The easiest way to accomplish this is to just drag & drop the method from the Data Control palette to the AMX page and drop it as a button and let the framework hook it up for you.  There is an inputText component on the page that is bound to a pageFlowScope variable called "zip".  This is used as the parameter to the Action binding when it is executed.  Because the actionListener attribute of the commandButton executes the Web Service each time, we ensure that the method is invoked every time the button is clicked. Weather Info: Unlike the previous method, this time instead of explictly executing the web service method we are using deferred invocation.  What this means is that we will bind to the results of the method and the framework will execute the method when it the data is required to be rendered.  We do this by simply doing a drag & drop of the results of the GetWeatherInformation to the AMX page.  When the page is rendered and the bindings are resolved the framework invokes the method.  This executes the method only when it is needed and fills the Data Control provider.  Because we never re-execute the method, you can click from Home to Weather Info and back many times and the web service is only ever invoked once. Issues and Possible Improvements: One thing you will quickly realize with this example is that the error handling is done by the framework for you. For simple examples this is fine but for real applications you'll want to customize these error messages.  With the declarative invocation of web services, this is difficult.  This is one aspect we'll address in the second installment of the web service examples where we will show you how to do programmatic invocation which allows you better error handling. Another issue you will notice with this example is that we can enumerate the weather information but there isn't an easy way to use that information to show the corresponding description and image as part of the forecast results.  We'll show you how to do this in the next example.

  Read the article

• The Growing Importance of Network Virtualization

  - by user12608550

  The Growing Importance of Network Virtualization We often focus on server virtualization when we discuss cloud computing, but just as often we neglect to consider some of the critical implications of that technology. The ability to create virtual environments (or VEs [1]) means that we can create, destroy, activate and deactivate, and more importantly, MOVE them around within the cloud infrastructure. This elasticity and mobility has profound implications for how network services are defined, managed, and used to provide cloud services. It's not just servers that benefit from virtualization, it's the network as well. Network virtualization is becoming a hot topic, and not just for discussion but for companies like Oracle and others who have recently acquired net virtualization companies [2,3]. But even before this topic became so prominent, Solaris engineers were working on technologies in Solaris 11 to virtualize network services, known as Project Crossbow [4]. And why is network virtualization so important? Because old assumptions about network devices, topology, and management must be re-examined in light of the self-service, elasticity, and resource sharing requirements of cloud computing infrastructures. Static, hierarchical network designs, and inter-system traffic flows, need to be reconsidered and quite likely re-architected to take advantage of new features like virtual NICs and switches, bandwidth control, load balancing, and traffic isolation. For example, traditional multi-tier Web services (Web server, App server, DB server) that share net traffic over Ethernet wires can now be virtualized and hosted on shared-resource systems that communicate within a larger server at system bus speeds, increasing performance and reducing wired network traffic. And virtualized traffic flows can be monitored and adjusted as needed to optimize network performance for dynamically changing cloud workloads. Additionally, as VEs come and go and move around in the cloud, static network configuration methods cannot easily accommodate the routing and addressing flexibility that VE mobility implies; virtualizing the network itself is a requirement. Oracle Solaris 11 [5] includes key network virtualization technologies needed to implement cloud computing infrastructures. It includes features for the creation and management of virtual NICs and switches, and for the allocation and control of the traffic flows among VEs [6]. Additionally it allows for both sharing and dedication of hardware components to network tasks, such as allocating specific CPUs and vNICs to VEs, and even protocol-specific management of traffic. So, have a look at your current network topology and management practices in view of evolving cloud computing technologies. And don't simply duplicate the physical architecture of servers and connections in a virtualized environment…rethink the traffic flows among VEs and how they can be optimized using Oracle Solaris 11 and other Oracle products and services. [1] I use the term "virtual environment" or VE here instead of the more commonly used "virtual machine" or VM, because not all virtualized operating system environments are full OS kernels under the control of a hypervisor…in other words, not all VEs are VMs. In particular, VEs include Oracle Solaris zones, as well as SPARC VMs (previously called LDoms), and x86-based Solaris and Linux VMs running under hypervisors such as OEL, Xen, KVM, or VMware. [2] Oracle follows VMware into network virtualization space with Xsigo purchase; http://www.mercurynews.com/business/ci_21191001/oracle-follows-vmware-into-network-virtualization-space-xsigo [3] Oracle Buys Xsigo; http://www.oracle.com/us/corporate/press/1721421 [4] Oracle Solaris 11 Networking Virtualization Technology, http://www.oracle.com/technetwork/server-storage/solaris11/technologies/networkvirtualization-312278.html [5] Oracle Solaris 11; http://www.oracle.com/us/products/servers-storage/solaris/solaris11/overview/index.html [6] For example, the Solaris 11 'dladm' command can be used to limit the bandwidth of a virtual NIC, as follows: dladm create-vnic -l net0 -p maxbw=100M vnic0

  Read the article

• Obfuscation is not a panacea

  - by simonc

  So, you want to obfuscate your .NET application. My question to you is: Why? What are your aims when your obfuscate your application? To protect your IP & algorithms? Prevent crackers from breaking your licensing? Your boss says you need to? To give you a warm fuzzy feeling inside? Obfuscating code correctly can be tricky, it can break your app if applied incorrectly, it can cause problems down the line. Let me be clear - there are some very good reasons why you would want to obfuscate your .NET application. However, you shouldn't be obfuscating for the sake of obfuscating. Security through Obfuscation? Once your application has been installed on a user’s computer, you no longer control it. If they do not want to pay for your application, then nothing can stop them from cracking it, even if the time cost to them is much greater than the cost of actually paying for it. Some people will not pay for software, even if it takes them a month to crack a $30 app. And once it is cracked, there is nothing stopping them from putting the result up on the internet. There should be nothing suprising about this; there is no software protection available for general-purpose computers that cannot be cracked by a sufficiently determined attacker. Only by completely controlling the entire stack – software, hardware, and the internet connection, can you have even a chance to be uncrackable. And even then, someone somewhere will still have a go, and probably succeed. Even high-end cryptoprocessors have known vulnerabilities that can be exploited by someone with a scanning electron microscope and lots of free time. So, then, why use obfuscation? Well, the primary reason is to protect your IP. What obfuscation is very good at is hiding the overall structure of your program, so that it’s very hard to figure out what exactly the code is doing at any one time, what context it is running in, and how it fits in with the rest of the application; all of which you need to do to understand how the application operates. This is completely different to cracking an application, where you simply have to find a single toggle that determines whether the application is licensed or not, and flip it without the rest of the application noticing. However, again, there are limitations. An obfuscated application still has to run in the same way, and do the same thing, as the original unobfuscated application. This means that some of the protections applied to the obfuscated assembly have to be undone at runtime, else it would not run on the CLR and do the same thing. And, again, since we don’t control the environment the application is run on, there is nothing stopping a user from undoing those protections manually, and reversing some of the obfuscation. It’s a perpetual arms race, and it always will be. We have plenty of ideas lined about new protections, and the new protections added in SA 6.6 (method parent obfuscation and a new control flow obfuscation level) are specifically designed to be harder to reverse and reconstruct the original structure. So then, by all means, obfuscate your application if you want to protect the algorithms and what the application does. That’s what SmartAssembly is designed to do. But make sure you are clear what a .NET obfuscator can and cannot protect you against, and don’t expect your obfuscated application to be uncrackable. Someone, somewhere, will crack your application if they want to and they don’t have anything better to do with their time. The best we can do is dissuade the casual crackers and make it much more difficult for the serious ones. Cross posted from Simple Talk.

  Read the article

• Create Custom Speech Bubbles in Silverlight.

  - by mbcrump

  I had a reader email me the following question: “How do you create Speech Bubbles in Silverlight/WPF without adding any extra .dlls? Right off the bat, I know at least two ways to create the speech bubbles that look just like the ones in comic books. Using the Callout Shapes included with Blend 4. Using the free 3rd party control named FreeBubbles (I used this before Blend 4). Unfortunately, we cannot use either of these as they will both add extra .dll’s to the project. So why wouldn’t you want to use one of those? I can think of a few reasons: You do not want to increase the size of your .XAP by including extra .dll’s. You do not have Expression Blend or the license to the use the .dll’s. You want a custom Speech Bubble that is not included in the four “Callout” Controls with Blend. Instead of using one of these methods, we will create a Speech Bubble in Blend 4 using Path element and a TextBlock. Before we get started, lets look at the Callout Shapes included with Blend 4. Using Blend 4 you can simply drag/drop these controls onto your Silverlight application and you are ready to go. We can create all of these Speech Bubbles and even some of the modern bubbles used in recent comic books. Lets get started. Start up Expression Blend 4 and select the Pen Tool. On the Art Board, start connecting the dots like I did below. You can add a color if you wish. …keep going …complete Let’s go ahead and add some text to the Speech Bubble. Drag a TextBlock from the Panel and put it directly inside the Speech Bubble. Go ahead and set the TextAlignment to Center for the TextBlock. and give it some text. At this point, you could go ahead and create a user control if you want to reuse the Speech Bubble you created. Select both the Path and the TextBlock by clicking then while holding down CTRL and then Right Click them. Select Make Into User Control. Give it a name and then Build your project. Lets create another one using the Ellipse for the older comic book style of Speech Bubbles. Drag an Ellipse to the Artboard and give it a color. Now, grab the Pen and drag a triangle like I did below. Simply drag it over a corner of the Ellipse. Select Combine then Unite and you will have a Path. At this point, you can go ahead and add a TextBlock like we did earlier. Lets go ahead and create a rounded rectangle one by adding a Rectangle to the Artboard. Go ahead and set the RadiuX and RadiusY to 25 to give it rounded edges. Let’s create another path and drag it right on top of our rounded rectangle like we did earlier. …looking good Select Combine then Unite and you will have a Path. At this point, you can go ahead and add a TextBlock like we did earlier. So let’s look at what we’ve created today using the path element and TextBlock. As you can tell, it required more work but meets the requirements. This was actually fun to do and I encourage anyone that visits my blog to send in request like this.  Subscribe to my feed

  Read the article

• Taking a look at the Mindscape Phone Elements for WP7.

  - by mbcrump

  I recently heard that Mindscape HQ had released the Windows Phone 7 Controls and had to take a look at them. 100 FREE LICENSE GIVEAWAY! Before we get to the screenshots, you will be pleased to learn that my usergroup called “Allaboutxaml” has partnered with Mindscape HQ and are giving away 100 license. You can check out the site here to get your free controls. But please hurry as after the 100 are gone then I will not have any more to give away! A few links to read first: The official blog post from Mindscape HQ detailing the release. They also have the links to download the trial and get started. The phone elements official forum! So, let’s get started. After you download the controls go ahead and double click the .exe to get started installing them. After everything is installed then you will have the following program group. I’d recommend clicking on the Phone Elements Directory to get started: Let’s go over each element: Bin – Just the .DLL that’s required to use Mindscape HQ WP7 Controls in your project. Documentation – a .CHM File that will show you how to get your project up and running quickly. Resources – Just a few image files Samples – This is a full WP7 project that details every controls. The thing that I was most interested in was how the controls look and is it easy to use. I always believed if your paying for controls then you should hold my hand through using them. You will be pleased to know that Mindscape made it very easy to use. First, the WP7 project in the “Samples” folder just works. Double click on the solution file and you are in an emulator looking at the controls. Since you have the source code for every control, it’s a matter of copying/pasting the code in your project to get it to work. What I did, was play with the controls in the emulator until I found one I could use. Then I looked at the Visual Studio solution and found the Page that contained the control. Mindscape makes this very easy to do with their layout: So, the one that I was interested in was the Looping List Box.  Here is a demo of it: I wanted to see how they were populating the numbers 1-100 so I found the code behind and noticed it was just this one line. LoopingListBox1.DataSource = new NumericDataSource() { MinValue = 1, MaxValue = 100 }; In case you are wondering, the NumericDataSource was created by MindScape and you can view the Declaration to find out more about it:   So, the controls are pretty much that easy to use. Play with the emulator and find the control you want to use. Find the XAML file in the Sample Solution and copy/paste the code. Let’s go ahead and take a look at the controls available: They also have a great variety of Charting controls: Overall it’s a nice set of WP7 controls. Feel free to leave a comment below on anything you would like to see and I will make sure that Mindscape HQ get the message. Don’t forget if you are the first 100 people reading this article then you will get a free license.  Subscribe to my feed CodeProject

  Read the article

• Slide 2d Vector to destination over a period of time

  - by SchautDollar

  I am making a library of GUI controls for games I make with XNA. I am currently developing the library as I make a game so I can test the features and find errors/bugs and hopefully smash them right away. My current issue is on a slide feature I want to implement for my base class that all controls inherit. My goal is to get the control to slide to a specified point over a specified amount of time. Here is the #region containing the code #region Slide private bool sliding; private Vector2 endPoint; private float slideTimeLeft; private float speed; private bool wasEnabled; private Vector2 slideDirection; private float slideDistance; public void Slide(Vector2 startPoint, Vector2 endPoint, float slideTime) { this.location = startPoint; Slide(endPoint,slideTime); } public void Slide(Vector2 endPoint, float slideTime) { this.wasEnabled = this.enabled; this.enabled = false; this.sliding = true; Vector2 tempLength = endPoint - this.location; this.slideDistance = tempLength.Length(); //Was this.slideDistance = (float)Math.Sqrt(tempLength.LengthSquared()); this.speed = slideTime / this.slideDistance; this.endPoint = endPoint; this.slideTimeLeft = slideTime; } private void UpdateSlide(GameTime gameTime) { if (this.sliding) { this.slideTimeLeft -= gameTime.ElapsedGameTime.Milliseconds; if (this.slideTimeLeft >= 0 ) { if ((this.endPoint-this.location).Length() != 0){//Was if (this.endPoint.LengthSquared() > 0 || this.location.LengthSquared() > 0) { this.slideDirection = Vector2.Normalize(this.endPoint - this.location); } this.location += this.slideDirection * speed * gameTime.ElapsedGameTime.Milliseconds;//This is where I believe the issue is, but I'm not sure. It seems right to me... (Even though it doesn't work) } else { this.enabled = this.wasEnabled; this.location = this.endPoint;//After time, the controls position will get set to be the endpoint. this.sliding = false; } } } #endregion this.location is the location of the control elsewhere defined in the class. I have looked at this blog as a huge reference and have googled around quite and have looked on many forums but can't find anything that shows how to implement it. Please and Thanks for your time! EDIT: I have switched this line "this.location += this.slideDirection * speed * gameTime.ElapsedGameTime.Milliseconds;" several times to see what it does. My issue is getting the control to smoothly move to the end location. It moves after the time has expired, but It doesn't move other then that except flash in my face. EDIT2: I have used the first slide method with 3 parameters and it works except it doesn't do it in a period of time and once it gets to its destination, it starts moving randomly towards the previous location and the end location.

  Read the article

• Passing Custom Headers to Ajax request on Select2

  - by Sutikshan Dubey

  We are trying to implement Ajax Remote data loading in Select2:- $scope.configPartSelect2 = { minimumInputLength: 3, ajax: { url: "/api/Part", // beforeSend: function (xhr) { xhr.setRequestHeader('Authorization-Token', http.defaults.headers.common['Authorization-Token']); }, // headers: {'Authorization-Token': http.defaults.headers.common['Authorization-Token']}, data: function (term, page) { return {isStockable: true}; }, results: function (data, page) { // parse the results into the format expected by Select2. // since we are using custom formatting functions we do not need to alter remote JSON data return { results: data }; } } }; We are using AngularJS. With each Http request we have set it's default to have our Authtoken as header. But somehow it is not working in conjunction with Select2 Ajax request. In above code, commented code are my failed attempts.

  Read the article

• MSDTC attempts to enlist client machine in a distributed transaction

  - by Ken

  Hi there We're seeing the following intermittent warning logged by MSDTC: A caller has attempted to propagate a transaction to a remote system, but MSDTC network DTC access is currently disabled on machine 'X'. Please review the MS DTC configuration settings. However, MSDTC is disabled on machine X by design - it's a client machine, and has no business being enlisted in the transaction! Several windows service endpoints hosting WCF services over TCP Single SQL Server 2005 instance beneath Linq to Sql Remote client receives event callbacks over WCF/TCP The issue is tricky to reproduce - usually following restart of services. We suspect a callback to the client machine is occurring within the context of a transaction. Just wondering if anyone has seen similar issues?? Ken

  Read the article

• How to prevent Android bluetooth RFCOMM connection from dying immediately after .connect()?

  - by Gilead

  I'm trying to connect to a Zeemote (http://zeemote.com/) gaming controller from Moto Droid running 2.0.1 firmware. The test application below does connect to the device (LED flashes) but connection is dropped immediately after that. I can connect to the device perfectly fine using bluez tools (log attached as well). I'm quite at a loss here, I work on it for so long that I ran out of ideas so any help would be very much appreciated. Thanks, Max =========================================== Code: public class ZeeTest extends Activity { @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); try { test(); } catch (IOException e) { e.printStackTrace(); } } public void test() throws IOException { BluetoothDevice zee = BluetoothAdapter.getDefaultAdapter(). getRemoteDevice("00:1C:4D:02:A6:55"); Log.d("ZeeTest", "++++ Creating socket"); BluetoothSocket sock = zee.createRfcommSocketToServiceRecord( UUID.fromString("8e1f0cf7-508f-4875-b62c-fbb67fd34812")); Log.d("ZeeTest", "++++ Connecting"); sock.connect(); Log.d("ZeeTest", "++++ Connected"); final InputStream in = sock.getInputStream(); new Thread() { @Override public void run() { byte[] buffer = new byte[32]; int bytes = 0; int x = 0; Log.d("ZeeTest", "++++ Listening..."); while (x < 200) { x++; try { bytes = in.read(buffer); Log.d("ZeeTest", "++++ Read "+ bytes +" bytes"); } catch (IOException e) { // java.io.IOException: Software caused connection abort if (x % 50 == 0) { Log.d("ZeeTest", "Tried "+ x +" times ("+ bytes +")"); } try { Thread.sleep(100); } catch (InterruptedException ie) {} } } Log.d("ZeeTest", "++++ Done: thread exit"); } }.start(); Log.d("ZeeTest", "++++ Done: test()"); } } =========================================== Log: I/ActivityManager( 1169): Start proc zee.test for activity zee.test/.ZeeTest: pid=4294 uid=10084 gids={3002, 3001, 3003} I/dalvikvm( 4294): Debugger thread not active, ignoring DDM send (t=0x41504e4d l=38) D/dalvikvm( 4287): LinearAlloc 0x0 used 640700 of 5242880 (12%) I/dalvikvm( 4294): Debugger thread not active, ignoring DDM send (t=0x41504e4d l=20) D/ZeeTest ( 4294): ++++ Creating socket D/ZeeTest ( 4294): ++++ Connecting E/BluetoothEventLoop.cpp( 1169): event_filter: Received signal org.bluez.Device:PropertyChanged from /org/bluez/1240/hci0/dev_00_1C_4D_02_A6_55 I/usbd ( 1068): process_usb_uevent_message(): buffer = add@/devices/virtual/bluetooth/hci0/hci0:1 I/usbd ( 1068): main(): call select(...) E/BluetoothEventLoop.cpp( 1169): event_filter: Received signal org.bluez.Adapter:DeviceFound from /org/bluez/1240/hci0 V/BluetoothEventRedirector( 1242): Received android.bluetooth.device.action.FOUND V/BluetoothEventRedirector( 1242): Received android.bleutooth.device.action.UUID D/ZeeTest ( 4294): ++++ Connected D/ZeeTest ( 4294): ++++ Done: test() D/ZeeTest ( 4294): ++++ Listening... I/ActivityManager( 1169): Displayed activity zee.test/.ZeeTest: 2296 ms (total 2296 ms) E/BluetoothEventLoop.cpp( 1169): event_filter: Received signal org.bluez.Device:PropertyChanged from /org/bluez/1240/hci0/dev_00_1C_4D_02_A6_55 I/usbd ( 1068): process_usb_uevent_message(): buffer = remove@/devices/virtual/bluetooth/hci0/hci0:1 I/usbd ( 1068): main(): call select(...) V/BluetoothEventRedirector( 1242): Received android.bleutooth.device.action.UUID D/ZeeTest ( 4294): Tried 50 times (0) D/ZeeTest ( 4294): Tried 100 times (0) D/ZeeTest ( 4294): Tried 150 times (0) D/ZeeTest ( 4294): Tried 200 times (0) D/ZeeTest ( 4294): ++++ Done: thread exit =========================================== Terminal log: $ sdptool browse Inquiring ... Browsing 00:1C:4D:02:A6:55 ... $ sdptool records 00:1C:4D:02:A6:55 Service Name: Zeemote Service RecHandle: 0x10015 Service Class ID List: UUID 128: 8e1f0cf7-508f-4875-b62c-fbb67fd34812 Protocol Descriptor List: "L2CAP" (0x0100) "RFCOMM" (0x0003) Channel: 1 Language Base Attr List: code_ISO639: 0x656e encoding: 0x6a base_offset: 0x100 $ rfcomm connect /dev/tty10 00:1C:4D:02:A6:55 Connected /dev/rfcomm0 to 00:1C:4D:02:A6:55 on channel 1 Press CTRL-C for hangup # rfcomm show /dev/tty10 rfcomm0: 00:1F:3A:E4:C8:40 - 00:1C:4D:02:A6:55 channel 1 connected [reuse-dlc release-on-hup tty-attached] # cat /dev/tty10 (nothing here) # hcidump HCI sniffer - Bluetooth packet analyzer ver 1.42 device: hci0 snap_len: 1028 filter: 0xffffffff < HCI Command: Create Connection (0x01|0x0005) plen 13 > HCI Event: Command Status (0x0f) plen 4 > HCI Event: Connect Complete (0x03) plen 11 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 > HCI Event: Read Remote Supported Features (0x0b) plen 11 < ACL data: handle 11 flags 0x02 dlen 10 L2CAP(s): Info req: type 2 > HCI Event: Command Status (0x0f) plen 4 > HCI Event: Page Scan Repetition Mode Change (0x20) plen 7 > HCI Event: Max Slots Change (0x1b) plen 3 < HCI Command: Remote Name Request (0x01|0x0019) plen 10 > HCI Event: Command Status (0x0f) plen 4 > ACL data: handle 11 flags 0x02 dlen 16 L2CAP(s): Info rsp: type 2 result 0 Extended feature mask 0x0000 < ACL data: handle 11 flags 0x02 dlen 12 L2CAP(s): Connect req: psm 3 scid 0x0040 > HCI Event: Number of Completed Packets (0x13) plen 5 > ACL data: handle 11 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x04fb scid 0x0040 result 1 status 2 Connection pending - Authorization pending > HCI Event: Remote Name Req Complete (0x07) plen 255 > ACL data: handle 11 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x04fb scid 0x0040 result 0 status 0 Connection successful < ACL data: handle 11 flags 0x02 dlen 16 L2CAP(s): Config req: dcid 0x04fb flags 0x00 clen 4 MTU 1013 (events are properly received using bluez)

  Read the article

• winforms databinding best practices

  - by Kaiser Soze

  Demands / problems: I would like to bind multiple properties of an entity to controls in a form. Some of which are read only from time to time (according to business logic). When using an entity that implements INotifyPropertyChanged as the DataSource, every change notification refreshes all the controls bound to that data source (easy to verify - just bind two properties to two controls and invoke a change notification on one of them, you will see that both properties are hit and reevaluated). There should be user friendly error notifications (the entity implements IDataErrorInfo). (probably using ErrorProvider) Using the entity as the DataSource of the controls leads to performance issues and makes life harder when its time for a control to be read only. I thought of creating some kind of wrapper that holds the entity and a specific property so that each control would be bound to a different DataSource. Moreover, that wrapper could hold the ReadOnly indicator for that property so the control would be bound directly to that value. The wrapper could look like this: interface IPropertyWrapper : INotifyPropertyChanged, IDataErrorInfo { object Value { get; set; } bool IsReadOnly { get; } } But this means also a different ErrorProvider for each property (property wrapper) I feel like I'm trying to reinvent the wheel... What is the 'proper' way of handling complex binding demands like these? Thanks ahead.

  Read the article

• CommunicationException with 'not recognized sequence' message in WCF.

  - by brain_pusher

  Hello, I get a CommunicationException while using WCF service. The message is: The remote endpoint no longer recognizes this sequence. This is most likely due to an abort on the remote endpoint. The value of wsrm:Identifier is not a known Sequence identifier. The reliable session was faulted. The exception is thrown in a moment after a contract method was called. Before calling contract method the channel state is Opened. I restore my service client after catching this exception and for some time it works fine. But then this error occures again. It seems like some timeout is exceeded, but I can't understand which one exactly. I use wsHttpBinding with reliableSession enabled. The InactivityTimeout is set to half an hour and I'm sure it's not exceeded, because exception is thrown earlier.

  Read the article

• How to upload web.config file using WebDAV on IIS7?

  - by Martin Liversage

  I want to copy an ASP.NET MVC website to a remote IIS 7 server using WebDAV. I have created a site in IIS, enabled WebDAV and assigned a special application pool I have named "WebDAV Application Pool". Using a Windows 7 or Vista client I'm able to mount the remote site as a network drive. So far, so good. However, I have problems uploading web.config files to the remote site. One problem is that as soon as a web.config has been uploaded it is used to configure the WebDAV site. The web.config file in a Views folder of a MVC project effectively blocks access to that folder. To work around this problem I have configured the application pool in the applicationHost.config file: <configuration> <applicationPools> <add name="WebDAV Application Pool" autoStart="true" enableConfigurationOverride="false" /> </applicationPools> </configuration> The interesting part is the 'enableConfigurationOverride` attribute: When true, indicates that delegated settings in Web.config files will processed for applications within this application pool. When false, all settings in Web.config files will be ignored for this application pool. Doing this makes it possible to upload a web.config file to the Views folder without breaking access to the folder. However, I'm still unable to upload a web.config file to the root folder. I have the following settings in the applicationHost.config file to ensure that request filtering doesn't interfere with WebDAV: <configuration> <location path="webdav.mysite.tld"> <system.webServer> <security> <requestFiltering> <fileExtensions applyToWebDAV="false" /> <verbs applyToWebDAV="false" /> <hiddenSegments applyToWebDAV="false" /> </requestFiltering> </security> </system.webServer> </location> </configuration> In particular hiddenSegments will normally block access to web.config but setting the applyToWebDAV attribute to false should ensure that this file isn't blocked when using WebDAV. Unfortunately, I'm still unable to copy my web.config file to the root folder of the site. Doing drag and drop in Windows Explorer to the mapped WebDAV network drive will result in the following error message: Error 0x80070057: The parameter is incorrect. On the wire it seems that the HTTP status 400 Bad Request is returned. Is there anything I can do to configure WebDAV on IIS 7 to avoid this problem?

  Read the article

• Most useful free .NET libraries?

  - by Binoj Antony

  I have used a lot of free .NET libraries, some from Microsoft itself! Which ones have you found the most useful? Dependency Injection/Inversion of Control Unity Framework - Microsoft StructureMap - Jeremy Miller Castle Windsor NInject Spring Framework Autofac Managed Extensibility Framework Logging Logging Application Block - Microsoft Log4Net - Apache Error Logging Modules and Handlers(ELMAH) NLog Compression SharpZipLib DotNetZip YUI Compressor (CSS and JS compression/minification) AjaxMinifier (in other downloads) (JS compression. Also includes MSBuild task) Ajax Ajax Control Toolkit - Microsoft AJAXNet Pro Data Mapper XmlDataMapper AutoMapper ORM NHibernate Castle ActiveRecord Subsonic XmlDataMapper Charting/Graphics Microsoft Chart Controls for ASP.NET 3.5 SP1 Microsoft Chart Controls for Winforms ZedGraph Charting NPlot - Charting for ASP.NET and WinForms PDF Creators/Generators PDFsharp iTextSharp Unit Testing/Mocking NUnit Rhino Mocks Moq TypeMock.Net xUnit.net mbUnit Machine.Specifications Automated Web Testing Selenium Watin URL Rewriting url rewriter UrlRewriting.Net Url Rewriter and Reverse Proxy - Managed Fusion Controls Krypton - Free winform controls Source Grid - A Grid control Devexpress - free controls Unclassified CSLA Framework - Business Objects Framework AForge.net - AI, computer vision, genetic algorithms, machine learning Enterprise Library 4.1 - Logging, Exception Management, Validation, Policy Injection File helpers library C5 Collections - Collections for .NET Quartz.NET - Enterprise Job Scheduler for .NET Platform MiscUtil - Utilities by Jon Skeet Lucene.net - Text indexing and searching Json.NET - Linq over JSON Flee - expression evaluator PostSharp - AOP IKVM - brings the extensive world of Java libraries to .NET. Title of the question taken from here. [EDIT] Please provide links to these free libraries as well. Once we have a huge list of this, it can be arranged in categories! Please do not mention .NET Applications/EXEs here.

  Read the article

• WPF - Binding an ObservableCollection Dependency Property within a UserControl

  - by John

  I have a control class DragGrid : Grid { ... } which inherits from the original grid and enables dragging and resizing its child elements. I need to bind a custom DP named WorkItemsProperty to an observable collection of type WorkItem (implements INotifyPropertyChanged). Each element in the grid is bound to a collection item. Whenever the user adds a new item dynamically at runtime (the items cannot be declared in XAML!), or deletes an item from that collection, the WorkItems DP on the DragGrid should be updated, and the children in the grid (where each child represents a WorkItem collection item). My question is how does the DP notify the control about which child element in the grid must be removed, changed ('change' means user dragged an element, or resized it with the mouse) or added, and how would I identify which one of the existing children is the one that needs to be deleted or changed. I understand that this is where the DependencyPropertyChangedCallback comes in. But that only gets called when the DP property is set anew, not when something inside the collection changes (like add, remove item). So in the end, does the DragGrid control somehow need to subscribe to the CollectionChanged event? At what point would I hook up the event handler for that?

  Read the article

• DirectShow - passing parameters to custom source push filter

  - by mkurek

  Hello, I'm working on a solution that will be used to receive video stream from remote hosts and to put various texts on the top of it. Currently it consists of custom DirectShow push filter (C++) which receives data from remote hosts using RTP protocol and tiny C# application that sets up the DirectShow graph and is used as a container for the video. I'm using DirectShowLib interop library. However, I'm not sure how to pass parameters from this C# app to my custom filter. What are possible ways to do it?

  Read the article

• HttpWebRequest and BindIPEndPointDelegate getting socket exception

  - by Evgeny Gavrin

  I've got c# code running on a computer with multiple network interfaces, and the following code to select an IP address for a HttpWebRequest to bind ServicePoint: HttpWebRequest request = (HttpWebRequest)WebRequest.Create(remoteFilename); request.KeepAlive = false; request.ServicePoint.BindIPEndPointDelegate = delegate( ServicePoint servicePoint, IPEndPoint remoteEndPoint, int retryCount) { return new IPEndPoint(IPAddress.Parse(ipAddr), 0); }; But it works only for one of the available network interfaces. Trying to access remote server through others throws an exception: System.Net.WebException: Unable to connect to the remote server --- System.Net.Sockets.SocketException: A socket operation was attempted to an unreachable network How can it be solved?

  Read the article

• Cannot SSH after resetting firewall on VPS

  - by Thomas Buckley

  I'm having trouble trying to SSH to my Debian 5 VPS with blacknight. It was working fine until I did the following: Logged into 'Parallels Infrastructure Manager' - Container - Firewall - Set to 'Normal Firewall settings'. It told me there was an error with the IPTables and offered the option again with a checkbox to 'reset' firewall settings, I selected this. I can see that that the default rules are been applied ( anything from anyone on any port and allowing anything to happen). Whenever I attempt to SSH I get the following debug info: thomas@localmachine:~/.ssh$ ssh -v thomas@hostname OpenSSH_5.8p1 Debian-7ubuntu1, OpenSSL 1.0.0e 6 Sep 2011 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to hostname [***********] port 22. debug1: Connection established. debug1: identity file /home/thomas/.ssh/id_rsa type 1 debug1: Checking blacklist file /usr/share/ssh/blacklist.RSA-4096 debug1: Checking blacklist file /etc/ssh/blacklist.RSA-4096 debug1: identity file /home/thomas/.ssh/id_rsa-cert type -1 debug1: identity file /home/thomas/.ssh/id_dsa type -1 debug1: identity file /home/thomas/.ssh/id_dsa-cert type -1 debug1: identity file /home/thomas/.ssh/id_ecdsa type -1 debug1: identity file /home/thomas/.ssh/id_ecdsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.1p1 Debian-5 debug1: match: OpenSSH_5.1p1 Debian-5 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.8p1 Debian-7ubuntu1 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA ************************************* debug1: Host 'hostname' is known and matches the RSA host key. debug1: Found key in /home/thomas/.ssh/known_hosts:2 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /home/thomas/.ssh/id_rsa debug1: Authentications that can continue: publickey debug1: Trying private key: /home/thomas/.ssh/id_dsa debug1: Trying private key: /home/thomas/.ssh/id_ecdsa debug1: No more authentication methods to try. Permission denied (publickey). I had my public/private RSA keys set up and working fine before I reset the firewall settings. I had also made the following changes to my /etc/ssh/sshd_config file on the VPS: PermitRootLogin no PasswordAuthentication no X11Forwarding no UsePAM no UseDNS no AllowUsers thomas Could it be something to do with the SSH server & client having different versions between my local machine and VPS? Any help appreciated. Output with ssh -vvv thomas@localcomputer:~/.ssh$ ssh -vvv thomas@**************** OpenSSH_5.8p1 Debian-7ubuntu1, OpenSSL 1.0.0e 6 Sep 2011 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to ************ [*************] port 22. debug1: Connection established. debug3: Incorrect RSA1 identifier debug3: Could not load "/home/thomas/.ssh/id_rsa" as a RSA1 public key debug2: key_type_from_name: unknown key type '-----BEGIN' debug3: key_read: missing keytype debug2: key_type_from_name: unknown key type 'Proc-Type:' debug3: key_read: missing keytype debug2: key_type_from_name: unknown key type 'DEK-Info:' debug3: key_read: missing keytype debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug2: key_type_from_name: unknown key type '-----END' debug3: key_read: missing keytype debug1: identity file /home/thomas/.ssh/id_rsa type 1 debug1: Checking blacklist file /usr/share/ssh/blacklist.RSA-4096 debug1: Checking blacklist file /etc/ssh/blacklist.RSA-4096 debug1: identity file /home/thomas/.ssh/id_rsa-cert type -1 debug1: identity file /home/thomas/.ssh/id_dsa type -1 debug1: identity file /home/thomas/.ssh/id_dsa-cert type -1 debug1: identity file /home/thomas/.ssh/id_ecdsa type -1 debug1: identity file /home/thomas/.ssh/id_ecdsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.1p1 Debian-5 debug1: match: OpenSSH_5.1p1 Debian-5 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.8p1 Debian-7ubuntu1 debug2: fd 3 setting O_NONBLOCK debug3: load_hostkeys: loading entries for host "*****************" from file "/home/thomas/.ssh/known_hosts" debug3: load_hostkeys: found key type RSA in file /home/thomas/.ssh/known_hosts:1 debug3: load_hostkeys: loaded 1 keys debug3: order_hostkeyalgs: prefer hostkeyalgs: [email protected],[email protected],ssh-rsa debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: [email protected],[email protected],ssh-rsa,[email protected],[email protected],[email protected],[email protected],[email protected],ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-ctr hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 127/256 debug2: bits set: 498/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA *********************************************************** debug3: load_hostkeys: loading entries for host "*********************" from file "/home/thomas/.ssh/known_hosts" debug3: load_hostkeys: found key type RSA in file /home/thomas/.ssh/known_hosts:1 debug3: load_hostkeys: loaded 1 keys debug1: Host '****************' is known and matches the RSA host key. debug1: Found key in /home/thomas/.ssh/known_hosts:1 debug2: bits set: 516/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /home/thomas/.ssh/id_rsa (0x7fa7028b6010) debug2: key: /home/thomas/.ssh/id_dsa ((nil)) debug2: key: /home/thomas/.ssh/id_ecdsa ((nil)) debug1: Authentications that can continue: publickey debug3: start over, passed a different list publickey debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /home/thomas/.ssh/id_rsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey debug1: Trying private key: /home/thomas/.ssh/id_dsa debug3: no such identity: /home/thomas/.ssh/id_dsa debug1: Trying private key: /home/thomas/.ssh/id_ecdsa debug3: no such identity: /home/thomas/.ssh/id_ecdsa debug2: we did not send a packet, disable method debug1: No more authentication methods to try. Permission denied (publickey). sshd_config # Package generated configuration file # See the sshd(8) manpage for details # What ports, IPs and protocols we listen for Port 22 # Use these options to restrict which interfaces/protocols sshd will bind to #ListenAddress :: #ListenAddress 0.0.0.0 Protocol 2 # HostKeys for protocol version 2 HostKey /etc/ssh/ssh_host_rsa_key HostKey /etc/ssh/ssh_host_dsa_key #Privilege Separation is turned on for security UsePrivilegeSeparation yes # Lifetime and size of ephemeral version 1 server key KeyRegenerationInterval 3600 ServerKeyBits 768 # Logging SyslogFacility AUTH LogLevel INFO # Authentication: LoginGraceTime 120 PermitRootLogin no StrictModes yes RSAAuthentication yes PubkeyAuthentication yes #AuthorizedKeysFile %h/.ssh/authorized_keys # Don't read the user's ~/.rhosts and ~/.shosts files IgnoreRhosts yes # For this to work you will also need host keys in /etc/ssh_known_hosts RhostsRSAAuthentication no # similar for protocol version 2 HostbasedAuthentication no # Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication #IgnoreUserKnownHosts yes # To enable empty passwords, change to yes (NOT RECOMMENDED) PermitEmptyPasswords no # Change to yes to enable challenge-response passwords (beware issues with # some PAM modules and threads) C hallengeResponseAuthentication no # Change to no to disable tunnelled clear text passwords PasswordAuthentication no # Kerberos options #KerberosAuthentication no #KerberosGetAFSToken no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes # GSSAPI options #GSSAPIAuthentication no #GSSAPICleanupCredentials yes X11Forwarding no X11DisplayOffset 10 PrintMotd no PrintLastLog yes TCPKeepAlive yes #UseLogin no #MaxStartups 10:30:60 #Banner /etc/issue.net # Allow client to pass locale environment variables AcceptEnv LANG LC_* Subsystem sftp /usr/lib/openssh/sftp-server UsePAM no UseDNS no AllowUsers thomas Thanks

  Read the article

• How do I make an ellipse blink?

  - by MedicineMan

  I am trying to make a custom control in WPF. I want it to simulate the behavior of a LED that can blink. There are three states to the control: On, Off, and Blinking. I know how to set On and Off through the code behind, but this WPF animation stuff is just driving me nuts!!!! I cannot get anything to animate whatsoever. The plan is to have a property called state. When the user sets the value to blinking, I want the control to alternate between green and grey. I'm assuming I need a dependency property here, but have no idea. I had more xaml before but just erased it all. it doesn't seem to do anything. I'd love to do this in the most best practice way possible, but at this point, I'll take anything. I'm half way to writing a thread that changes the color manually at this point. <UserControl x:Class="WpfAnimation.LED" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Height="300" Width="300"> <Grid> <Ellipse x:Name="MyLight" Height="Auto" Width="Auto"/> </Grid> </UserControl>

  Read the article

< Previous Page | 409 410 411 412 413 414 415 416 417 418 419 420  | Next Page >