Search Results

Search found 12827 results on 514 pages for 'regional settings'.

Page 415/514 | < Previous Page | 411 412 413 414 415 416 417 418 419 420 421 422  | Next Page >

• Deploying ASP.NET MVC to Windows Server 2003

  - by pete the pagan-gerbil

  Hi, I have a problem with an MVC 2 website on Windows Server 2003 running IIS 6. It is externally hosted, but we have a 2003 server internally for testing. The internal server runs the website fine, the external server gives a 403 ("website declined to show this page") error when navigating to the root of the site, and a 404 if I try to navigate directly to a page resource. I have tried the wildcard ISAPI mapping and extension mapping, and a couple of other common checks (I forget exactly which now, most of them were already set correctly), but so far no joy. All the settings can be replicated on our internal server and the pages return properly. IIS logs just show exactly what the browser shows - 404 errors and 403s. I've read about a different level of trust required for an MVC application compared to a WebForms application - how can I check permissions and trust levels on the external and internal servers (assuming I am able to check that) and if that would cause these errors, what are the minimum levels that MVC require? Failing that, what else might be causing this error for me to try out?

  Read the article

• Additional Security Measures for Syslog over SSH

  - by Eric

  I'm currently working on setting up some secure syslog connections between a few Fedora servers. This is my currently setup 192.168.56.110 (syslog-server) <---- 192.168.57.110 (syslog-agent) From the agent, I am running this command: ssh -fnNTx -L 1514:127.0.0.1:514 [email protected] This works just fine. I have rsyslog on the syslog-agent pointing to @@127.0.0.1:1514 and it forwards everything to the server correctly on port 514 via the tunnel. My issue is, I want to be able to lock this down. I am going to use ssh keys so this is automated because there will be multiple agents talking to the server. Here are my concerns. Someone getting on the syslog-agent and logging into the server directly. I have taken care of this by ensuring that syslog_user has a shell of /sbin/nologin so that user can't get a shell at all. I don't want someone to be able to tunnel another port over ssh. Ex. - 6666:127.0.0.1:21. I know my first line of defense against this is to just not have anything listening on those ports and it's not an issue. However I want to be able to lock this down somehow. Are there any sshd_config settings on the server that I can use to make it where only port 514 can be tunneled over ssh? Are there any other major security concerns I'm overlooking at this point? Thanks in advance for your help/comments.

  Read the article

• Prevent SSL certificate being returned for a specific domain

  - by jezmck

  Apologies for a long question: We've taken on a new client whose web hosting was previously on their in-house server which still has their Exchange/Outlook email. We now host their domain (and many others) on our server. They're complaining that they're getting errors in Outlook. I don't understand the AutoDiscover stuff at the root of the problem, but believe that I just need to stop the SSL certificate on our server being returned when requested at a particular domain: Yes it is, the issue lies with "{newclient}.com" being pointed to your server IP and that server has Port 443 open with an SSL certificate associated to it. So when Outlook/ActiveSync use autodiscover to find the mailbox settings it find your SSL (because 443 is open) and flags it as an error. The solution is to close 443 so its not discovered, Autodiscover will then proceed to mail.{newclient}.com via the MX / ServiceRecords and discover the correct SSL. I'm new here and there was no hand-over, so I don't know whether other currently hosted sites need to accept SSL connections, though I suspect some will, or may in future. This is a live server, so I can't risk trying loads of options in case I take the server offline! I feel like I should be adding something like the following to vhosts.conf. <VirtualHost *:443> ServerName {newclient}.com ServerAlias www.{newclient}.com SSLEngine Off SSLCertificateFile {NONE} SSLCertificateKeyFile {NONE} </VirtualHost> Apologies for the fact that I don't know enough about this subject to be able to ask the question more clearly!

  Read the article

• Overriding HOMEDRIVE and HOMEPATH as a Windows 7 user

  - by MikeC

  My employer has an Active Directory group policy which sets my Windows 7 laptop HOMEDRIVE to "M:" (a mapped network drive) and my HOMEPATH to "\". Since I have read-only permissions for the root of that shared drive, I cannot create files or directories in my windows home directory. My attempts to work with the IT department have been unsuccessful. Is there a way for me to globally change these envars at boot or login time? I need for all applications to use alternate values (such as "C:" and "\Users\myname"). I have some installed utilities (like gvim and others) that store preference files in the user's home directory. IMPORTANT: Changing these envars under "System Properties Environment Variables" does not work. I have tried setting these as both User and System Variables (including a reboot). TypingSET HOMEin a DOS window clearly shows that my settings are ignored. Also, using "Start in" in a Windows shortcut will also not solve this, as I need things like Explorer context menu items (like "Edit with Vim") to operate correctly. I do have admin rights on this company laptop, but I am not a Win7 guru. Back in the day, a boot script would have solved this in a minute. Is it even possible today? Thanks.

  Read the article

• How do I upgrade Windows Server 2008 R2 Standard (OEM Key) to Enterprise (MSDN Key) using DISM?

  - by Tom Crane

  (Originally asked as After upgrading to 2008 R2 Enterprise and installing more RAM, Windows can only see 4.00 GB but now I know what the question really is...) My Dell server came preinstalled with 2008 R2 Standard. I upgraded to Enterprise to take advantage of more than 32GB RAM. This server is purely for dev and testing, so I want to use my MSDN product key for the upgrade. I originally tried to uprade using the MSDN Enterprise key, but it wouldn't have it: dism /online /Set-Edition:ServerEnterprise /ProductKey:[MSDN key] => Error DISM DISM Transmog Provider: PID=5728 Product key is keyed to [], but user requested transmog to [ServerEnterprise] - CTransmogManager::ValidateTransmogrify I tried several things, including changing the current product key to the MSDN one. Eventually I used a KMS generic key which can be found in several technet forum posts. dism /online /Set-Edition:ServerEnterprise /ProductKey:[KMS Generic Key] ... and this appeared to work. I then changed the product key again (using the control panel) to the MSDN key, thinking that was the end of the matter. Only later when tried to start up VMs did I realise I only had 4GB of usable RAM. I didn't make the connection with the licensing changes at this point and went off on a wild goose chase of BIOS settings, memory configurations and the like. Only later when I saw this... http://social.technet.microsoft.com/Forums/en/winserverTS/thread/6debc586-0977-4731-b418-ca1edb34fe8b ...did I make the connection and reapply the KMS Generic key - which gave me all the RAM back. But now I have a system that isn't properly licensed, presumably I won't be able to activate it as it is, so I've got 2 days to enjoy it. With the MSDN key applied, only 4GB RAM is usable. Is there a way round this without a) rebuilding the server from scratch with the MSDN key from the start or b) buying a retail Enterprise license

  Read the article

• VPN messes up DNS resolution

  - by user124114

  After connecting with the Kerio VPN client (OS X Leopard) to a server, the internet (~web browsing) stopped working for the client. After poking around, the issue seems to be bad DNS server (i.e., entering IPs directly works). After disconnecting from the VPN, the invalid DNS server disappears from scutil --dns and all's well again. Now, I don't understand why OS X on the client even changes the DNS settings -- internet should be routed through a different interface, through the default gateway, not through the VPN. Questions: By what mechanism does connecting the VPN client change the "default" DNS server? How can I stop the VPN client from changing routing/DNS rules? Where is this stuff stored/modified? Before VPN: $ scutil --dns DNS configuration resolver #1 nameserver[0] : 10.66.77.1 # <---- default gateway = home router; all good order : 200000 resolver #2 domain : local options : mdns timeout : 2 order : 300000 ... VPN connected: $ scutil --dns DNS configuration resolver #1 nameserver[0] : 192.168.1.1 # <--- rubbish nameserver[1] : 192.168.2.1 order : 200000 resolver #2 domain : local options : mdns timeout : 2 order : 300000 ... The VPN doesn't appear among $ networksetup -listallnetworkservices.

  Read the article

• SharePoint web services not protected?

  - by Philipp Schmid

  Using WSS 3.0, we have noticed that while users can be restricted to access only certain sub-sites of a site collection through permission settings, the same doesn't seem to be true for web services, such as /_vti_bin/Lists.asmx! Here's our experimental setup: http://formal/test : 'test' site collection - site1 : first site in test site collection, user1 is member - site2 : second site in test site collection, user2 is member With this setup, using a web browser user2 can: - access http://formal/test/site2/Default.aspx - cannot access http://formal/test/site1/Default.aspx That's what is expected. To our surprise however, using the code below, user2 can retrieve the names of the lists in site1, something he should not have access to! Is that by (unfortunate) design, or is there a configuration setting we've missed that would prevent user2 from retrieving the names of lists in site1? Is this going to be different in SharePoint 2010? Here's the web service code used in the experiment: class Program { static readonly string _url ="http://formal/sites/research/site2/_vti_bin/Lists.asmx"; static readonly string _user = "user2"; static readonly string _password = "password"; static readonly string _domain = "DOMAIN"; static void Main(string[] args) { try { ListsSoapClient service = GetServiceClient(_url, _user, _password, _domain); var result = service.GetListCollection(); Console.WriteLine(result.Value); } catch (Exception ex) { Console.WriteLine(ex.ToString()); } } private static ListsSoapClient GetServiceClient(string url, string userName, string password, string domain) { BasicHttpBinding binding = new BasicHttpBinding(BasicHttpSecurityMode.TransportCredentialOnly); binding.Security.Transport.ClientCredentialType = HttpClientCredentialType.Ntlm; ListsSoapClient service = new ListsSoapClient(binding, new System.ServiceModel.EndpointAddress(url)); service.ClientCredentials.UserName.Password = password; service.ClientCredentials.UserName.UserName = (!string.IsNullOrEmpty(domain)) ? domain + "\\" + userName : userName; return service; } }

  Read the article

• I get "An error occurred while Windows was synchronizing with [name of time server]." when trying t

  - by ChrisF

  Prompted by the answers to this question I decided to give the Windows built in time synchronisation another go. However, no matter what time server I use I get this error: "An error occurred while Windows was synchronizing with [name of time server]." The help suggests the following as reasons for failure: You are not connected to the Internet. Establish an Internet connection before you attempt to synchronize your clock. Your personal or network firewall prevents clock synchronization. Most corporate and organizational firewalls will block time synchronization, as do some personal firewalls. Home users should read the firewall documentation for information about unblocking network time protocol (NTP). You should be able to synchronize your clock if you switch to Windows Firewall. The Internet time server is too busy or is temporarily unavailable. If this is the case, try synchronizing your clock later, or update it manually by double-clicking the clock on the taskbar. You can also try using a different time server. The time shown on your computer is too different from the current time on the Internet time server. Internet time servers might not synchronize your clock if your computer's time is off by more than 15 hours. To synchronize the time properly, ensure that the date and time settings are set close to your current time in the Date and Time Properties in Control Panel. Now the first reason is clearly wrong - I am connected to the internet. I can see the 2nd being the most likely cause. I have Sygate Personal Firewall running, but it normally asks if something it trying to connect for the first time. Does anyone know I can unblock the NTP protocol - or at least check if it is blocked?. I don't think it's #3 or #4 as I've tried a number of different servers including the one currently used by Atomic Clock Sync. Though if someone knows the address of a UK time server I can double check this.

  Read the article

• Trying to limit IMAP folders/mailboxes my iPhone/iPad sees

  - by QuantumMechanic

  (Note: I am using dovecot 1.0.10 on Ubuntu 8.04.4 LTS. Yes, I know I need to upgrade before next year :) (Note: The SMTP/IMAP server in question only serves my family, so there's only a very few users. Certainly what I propose below, even it it works, would be a logistical nightmare with any significant number of users). I have noticed (and have confirmed via google) that the iOS mail app is terrible in its handling of IMAP subscriptions, namespaces, etc. For example, my iPhone and iPad will see EVERYTHING (all mailboxes, folders, etc.), whereas clients like Thunderbird, alpine, etc. only see what I tell them to see. This makes it an incredible pain to move mail between mailboxes because I have to scroll through a gazillion things. The mail_location in dovecot.conf is: mail_location = mbox:%h/Mail/:INBOX=/var/mail/%u To get around this, I've been considering doing the following for user foo: Create a dovecot userdb with a foo-ios virtual user in it, whose UID is identical to that of the real (in /etc/passwd) foo user and with a homedir of /home/foo-ios. ln -s /var/mail/foo /var/mail/foo-ios mkdir -p /home/foo-ios/Mail cd /home/foo-ios/Mail ln -s /home/foo/Mail/mailbox-i-want-visible mailbox-i-want-visible Make symlinks for the rest of limited set of mailboxes/folders I want visible to the iOS mail app. chown -R foo:foo /home/foo-ios Change iOS mail app settings to log in as user foo-ios instead of user foo. Will this work or will there be some index/file corruption hell because there will be two sets of indexes (one set living in /home/foo/Mail/.imap and other set living in /home/foo-ios/Mail/.imap) indexing the same underlying mbox files? And I'd be more than happy to hear of a better way to do this with dovecot! (Or to hear that dovecot 2.x works better with iOS devices).

  Read the article

• Port 22 is not responding

  - by Emanuele Feliziani

  I'm trying to make the jump to VPS from shared hosting for better performances and greater flexibility, but am stuck with the fact that I can't access the machine via ssh. First of all, the machine is a CentOS 6.3 cPanel x64 with WHM 11.38.0. Sshd is running (it appears in the current running processes). Making a port scan I see that port 22 is not responding. Port 21 is, but I am not able to access the machine via ftp (I think it's a security measure, but I don't know where to disable/enable it). So, I'm stuck in WHM and have no way to access the configuration of the machine, neither via ssh nor with ftp/sftp. When trying to connect with ssh via Terminal I only get this: ssh: connect to host xx.xx.xxx.xxx port 22: Operation timed out I also tried to access with the hostname instead of the IP address and it's the same. There seem to be no firewall in WHM and I have whitelisted my home IP address to access ssh, though there were no restrictions in the first place. I have been wandering through all the settings and options in WHM for several hours now, but can't seem to find anything. Does anybody have a clue as to where I should start investigating? Update: Thanks everyone. It was in fact a matter of firewall. There was a firewall not controlled by the WHM software. I managed to crack into the console from the vps control panel (a terrible, terrible java app that barely took my keyboard input) and disabled the firewall altogether running service iptables stop so that I was able to access the console via ssh with the terminal. Now I will have to set up the firewall again because the command I ran looks like having completely wiped the iptables. Can you recommend any newby-friendly resource where I can learn how to go about this and what should I block? Or should I just go with something like this: http://configserver.com/cp/csf.html ? Thanks again to everyone who helped me out.

  Read the article

• Best usage for a laptop being used as a desktop without removable batteries

  - by Senseful

  After reading the information on http://batteryuniversity.com, I realize that one of the best ways to permanently damage a lithium ion battery is to use the battery at a high temperature while it's fully charged. This is exactly what happens when you use the computer as if it were a desktop computer, since leaving it plugged in will keep the battery at 100% and using the computer will heat up the battery. This is why it's recommend to remove the battery from your laptop if you are using it is this scenario. My question is what would you do if the laptop doesn't have removable batteries (e.g. a MacBook Pro)? Should I use some kind of charge cycle such as: charge to 80%, unplug the power chord, use the laptop until it reaches 20%, then repeat the cycle by charging to 80% again? If so, which values should I use instead of 80% and 20%? (I think charging to 80% is better than 100% because of the damage that a hot battery at 100% can do, but I just made the figure 80% up, and I'm sure there's a better number to strive for which is backed by science.) I've read many of the articles on batteryuniversity.com, but couldn't find anything pertaining to this. Update: What about doing something like charge (or discharge) it to 50%, then plug it in and turn on settings which use the battery as much as possible (e.g. brightness all the way up, wi-fi on, etc.), in order to try to maintain the battery at 50% (i.e. the rate it is charging is the same as it is discharging). This will probably heat up the battery, but would make it so you don't need to constantly plug and unplug the laptop. The one bad thing is that you are taking up more charge cycles which would decrease the battery life, thus I'm not sure this is a good idea.

  Read the article

• WRT54GL Tomato Router in Client wireless mode to an iPhone Personal Hotspot

  - by Gordo

  I am trying to connect a router with Tomato firmware to an iPhone 4. The goal is to connect to the Personal Hotspot in Client Wireless mode. This should allow wired and wireless users to connect to the router rather then the iPhone. In theory this should be possible but I am having difficulty. Router Linksys WRT54GL Tomato 1.28.1816 firmware iPhone iPhone 4 iOS 5.1 (9B176) Carrier Rogers Wireless Personal Hotspot works with other devices, wifi/bluetooth/usb iPhone Personal Hotspot settings Mode: B/G Security: WPA or WPA2 Personal Encryption: AES Router IP: 172.20.10.1 Subnet: 172.20.10.0 Min IP: 172.20.10.2 Max IP: 172.20.10.14 maximum number of wireless tethered hosts is 5 I have followed the directions here: http://www.wi-fiplanet.com/tutorials/article.php/3810281 Ensured that the router subnet does not 'collide' with the iPhone subnet. Here is the configuration of the Tomato 'Basic - Network - Wireless' section: http://i.stack.imgur.com/pbmTB.png I have tried several variations of this configuration, but nothing seems to work. NOTE: I have successfully connected to my own wifi network in Wireless Client mode, so I am confident that there are no bad cables or other hardware issues. I would prefer to use Tomato, but DD-WRT maybe my only other option. Thanks!

  Read the article

• UDP blocked by Windows XP Firewall when sending to local machine

  - by user36367

  I work for a software development company but the issue doesn't seem to be programming-related. Here is my setup: Windows XP Professional with Service Pack 3, all updated Program that sends UDP datagrams Program that receives UDP datagrams Windows Firewall set to allow inbound UDP datagrams on a specific port (Scope: Subnet) If I send a UDP datagram on any port to other, similar machines, it goes through. If I send the UDP datagram to the same computer running the program that sends (whether using broadcast, localhost IP or the specific IP of the machine), the receiver program gets nothing. I've traced the problem down to the Windows XP Firewall, as Windows 7 does not have this problem (and I do not wish to sully my hands with Vista). If the exception I create for that UDP port in the WinXP firewall is set for a Scope of Subnet the datagram is blocked, but if I set it to All Computers or specifically enter my network settings (192.168.2.161 or 192.168.2.0/255.255.255.0) it works fine. Using different UDP ports makes no difference. I've tried different programs to reproduce this problem (ServerTalk to send and either IP Port Spy or PortPeeker to receive) to make sure it's not our code that's the issue, and those programs' datagrams were blocked as well. Also, that computer only has one network interface, so there are no additional network weirdness. I receive my IP from a DHCP server, so this is a straightforward setup. Given that it doesn't happen in Windows 7 I must assume it's a defect in the Windows XP Firewall, but I'd think someone else would have encountered this problem before. Has anyone encountered anything like this? Any ideas?

  Read the article

• Windows 8 Pro Homegroup Not Allowing Access to Shared Files

  - by Jack Herr

  I have two pc's and a laptop. With all three running Windows 7, homegroup worked perfectly, with all computers able to access the files on the others exactly as one would expect. I installed Windows 8 Pro, which I downloaded recently from the MSDN website, on the laptop. From the info on the MSDN website, I believe the version downloaded is the official release version, not a release candidate. The install preserved all settings, apps, and files. I cannot connect to the homegroup from the laptop. Well, not exactly. I joined the homegroup during the install, and later left and rejoined, that was advertised as being offered by one of the pc's (not sure why that one was picked and not the other or both). This homegroup appears in my "computer" folder in the file explorer, offering files from that pc. But it excludes documents (only the music, pix, videos, and playlists folders on the one computer appear). I can actually access those files from the laptop. But the Homegroup folder, which actually shows all the computers by account and computer name and includes documents from both computers, does not open those folders when clicked. The computers listed by name in the Network folder give me a login that doesn't work. It asks for a username and password, no combinations of which work. Further, the following error message appears before the login is even attempted: "The system cannot contact a domain controller to service the authentication request. Please try again later." The two windows 7 pc's continue to share all files, including documents, seemlessly. I can also get to the laptop shared files, which I shared during setup, from either pc. Any ideas?

  Read the article

• Recommend a free temperature-monitoring utility for cores + video card, on Vista?

  - by smci

  Looking for your recommendations for a free temperature-monitoring utility, for my PC (Core 2) and graphics card for Vista. (Question reposted with the hyperlinks now I have 10 reputation). I don't want all the geeky details, I don't overclock, I don't see the need to mess with my fan speeds or motherboard settings, I just want something fairly basic to help with basic troubleshooting of intermittent overheats on video card and/or mobo: must run on Windows Vista (yes, don't laugh). ideally displays temperature when minimized to toolbar, and/or: automatically alerts me when temperature on either core or the video card exceeds a threshold ideally measures temperature of video card and system as well, not just the cores. HDD temperature is not necessary I think. logging is nice, graphs are also nice portability to Linux and Mac is nice Apparently Everest is the best paid option, but I'm not prepared to spend $40. I found the following free options, but no head-to-head at-a-glance comparison: CoreTemp (only does cores, not video card?) Open Hardware Monitor (nice graphs, displays when minimized to toolbar, no alerts) RealTemp (has alerts, works minimized, lightweight install) HWMonitor (no alerts, CNET: "[free version is] simple but effective") from CPUID CPUCool (not free: 21-day trialware, then $18) SpeedFan from Almico (too geeky, detail overload; CNET: "most users won't be able to make head or tail of the data this utility provides") Motherboard Monitor (CNET: not recommended, requires expert knowledge of your mobo, dangerous) Intel Thermal Analysis Tool (only does cores, not video card? has logging) Useful discussions I found: hardwarecanucks.com , superuser.com 1, 2 , forums.techarena.in (Update: I downloaded Real Temp 3.60 and it meets all my needs, the customizable alert temperature is great. Open Hardware Monitor seems to be the other one that mostly meets my needs, except no alerts; but it is portable. I tried SpeedFan but the interface is very cluttered, too much unnecessary detail (needs a Basic/Advanced mode and a revamp of the interface.) The answer to my underlying issue is nVidia Geforce LE 7500 video card which runs very hot.)

  Read the article

• What is the main reason of adsl modem/routers dying ?

  - by ldigas

  The other day my home adsl modem/router (dwg 684t in this case) died. A guy from the telecom company came, brought another so no problem in day to day operation, but he also left this one. Now, I'm interested ... it didn't fall, it wasn't electrocuted ... but it just doesn't work. What could be the problem ? Can they be fixed ? Is it worth it (in which case I would have two which is always nice) ... What are the usual problems that occur with them ? In this case, I can connect to the router, I can see its settings, I just can't connect to the internet. With the new one everything works. Weird. Edit: Additional question: Can those things be fixed ? I mean, is it worth giving it to a local tinker for him to experiment on it ? I'm not looking for a definite opinion, just your personal advice ... (although in the end I think I'm gonna archive it in the "cylinder register")

  Read the article

• Apache going straight to 100% mem usage on localhost

  - by Dennis Pedrie

  Hi, I'm running XAMPP on a OS X testing server... I'm the only person sending requests to the server. I've never messed with Apache config before, so I'm kinda without a paddle here. When I start Apache, I get ~10 httpd processes started, and 95% idle CPU. When I request a WordPress page, the CPU usage goes to 50%, and the page loads in about five seconds. It seems like once the page has finished loading, the CPU usage jumps to 100%, almost all of that httpd. A ton of processes get started, and they don't go away, and their CPU usage stays the same. I've changed the MaxRequestPerChild setting and so forth, but nothing seems to solve the problem. Even now, having not send any requests for about 15 minutes, the CPU usage is at 100%. Here's the applicable settings: Timeout 10 KeepAlive On MaxKeepAliveRequests 0 KeepAliveTimeout 3 <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 0 MaxSpareServers 2 MaxClients 20 MaxRequestsPerChild 50 </IfModule> I had always thought that once the request was made, Apache killed the process. Is there anything I can do to bring down the CPU usage, or is this just something I'll have to deal with? Thanks for helping out an Apache idiot.

  Read the article

• Windows 7 remote desktop encryption error every few minutes

  - by rfrankel

  Because of an error in data encryption, this session will now end. This is the error I've been getting more and more frequently over the past few days, to the point that I can't ignore it because it's happening consistently within 5 minutes of connecting - sometimes within a few seconds. Both the remote and local machines are Windows 7 Pro x64. The remote machine is behind a Linksys RV082, and I'm using UPnP to forward a remote port to the correct local port. This setup had been working fine for several months, and I can't think of any recent relevant changes that might have been made. Things I've already tried: Disabling unnecessary components of the network connection on the remote machine, until only IPv4 and Client for Microsoft Networks remain. Disabling TCP large send offload on both the remote and local machines. Confirming that the remote machine is not mentioned anywhere in any DMZ settings on the Linksys router. Confirming that there are no x509-related registry keys screwing things up (this is the suggested fix for a slightly different error anyway). These are the only solutions I've been able to find after about an hour of searching, and most of them apply to XP or Server 2003 in any case. If anyone could suggest something else, it would be much appreciated.

  Read the article

• Windows 7 hangs after going into sleep a second time

  - by Brian Stephenson

  I've searched everywhere around Google and can't figure out why this is happening so I decide to ask here to see if anyone has a problem like this. Like it says in the title, whenever I sleep ONCE I'm able to wake the system, but going back to sleep again AFTER waking up for the first time results in it hanging on no input and no output, with the fan spinning as fast as possible and alot of heat being spewed out by the fan as well. I've tried various things like setting all USB Hub Root's to not get switched off for power saving, disabling USB selective suspend, disabling PCI-e link state power management, and even unplugging ALL USB devices and it wont wake up after the second attempt. And I've even waited up to a full hour of the CPU fan spinning loudly and it's still stuck trying to wake up. The only USB devices I use are a Microsoft USB Comfort Curve Keyboard 2000 (IntelliType Pro) and a generic HID compliant mouse from Creative model number OMC90S "CREATIVE MOUSE OPTICAL LITE". My other devices like external drives and controllers are unplugged when I'm not using them as having too many USB devices plugged in at a time causes a deadlock on almost all of the ports I have. Here's my system specifications (Most of these are from CPU-Z): Brand: Gateway DX4300-19 Mainboard: Gateway RS780 Chipset: AMD 780G Rev 00 Southbridge: AMD SB700 Rev 00 LPCIO: ITE IT8718 BIOS: American Megatrends Inc. ver P01-A4 09/15/2009 CPU: AMD Phenom II X4 810 at 2.60 GHz RAM: 8.0 GB DDR2 Dual Channel Ganged Mode at 400 MHz GPU: ATI Radeon HD3200 Graphics Intergrated - RS780 OS: Windows 7 Home Premium x64 OEM (Acer Group) HDD: WDC WD10EADS-22M2B0 1.0 TB (Western Digital Green Caviar) My BIOS has absolutely no control over how I setup the sleep mode to be either S1 or S3. So I can't check these settings or even change them. Hybrid sleep is also disabled, I can successfully go into hibernation and wake from hibernation but this is painfully slow due to a harddrive problem I'm having with this "Green Drive". (Hibernation takes over ~3 minutes to complete) Any help would be appreciated, thanks.

  Read the article

• Authority Information Access local path being ignored

  - by Kevin

  I have a CA set up in Server 2008 R2, and generally it is working, but I can't control the local path/filename it writes its own certificate to for the Authority Information Access publishing. Here's a screen shot of the dialog I'm trying to set this on: From these settings I would expect to get the file: C:\Windows\system32\CertSrv\CertEnroll\DAMNIT.crt But instead I get: C:\Windows\system32\CertSrv\CertEnroll\SERVER.domain.com_My Issuing Authority(1).crt Of course, the actual change shown wouldn't be very useful, but it's illustrative; no matter what path/filename I use, it always lands up in the same place and with the same name. I actually wanted to change the name from <ServerDNSName>_<CaName><CertificateName>.crt to <CaName><CertificateName>.crt, since the latter corresponds to the HTTP URL whereas the former does not. Admittedly, I haven't set up many CAs so perhaps I'm just deluded as to what this dialog is supposed to be setting, but if so this is notoriously bad UI design. (Incidentally, I have a couple other complaints with the same dialog.) What's going on here and is there some way to get the filename pattern I want?

  Read the article

• IIS7 ASP.NET application - 2 identical apps in 2 identical app pools, 1 is responsive and 1 is not

  - by Ben

  I have an ASP.NET (v4.0) web app that is installed in a virtual directory (as an application) and is hosted in it's own app pool. This is repeated for each instance of the app (i.e. per customer). The app pools are integrated (not classic) mode and LoadUserProfile is set to true. Otherwise, default settings. Each instance currently has it's own copy of the code/config, and it's own data folder (basic file read/writes). 1 instance of this app runs well (operation used for comparison takes ~4 seconds). Every other instance runs slowly (from 10-25 seconds for the same operation). If I move the slower instance to the "fastest" app pool that instance springs to life. If I move the faster instance into the slower app pool that instance slows to a crawl. The app pools were created in the same way initially - manually. I later used the powershell copy routine to ensure an exact copy of the faster app pool and still the same behaviour. Comparing the apppool.config files shows they are identical barring the virtual directory assignments. There are no shared resources that are being blocked, so far as I can tell, and I tested that by shutting down the performant app pool and restarting... slow is still slow, and then when I restart that app pool (so it's loaded last) it's still faster...

  Read the article

• PHP 5.4.9 Mysqli issue

  - by Vitaly

  On Ubuntu 12.04 server I had PHP 5.4.9 installed from the source: ./configure --prefix=/etc/php --with-apxs2=/etc/apache2/bin/apxs --with-config-file-path=/etc/php --with-config-file-scan-dir=/etc/php/conf.d --with-libxml-dir=/usr/local/libxml2 --with-xsl=/usr/local/libxslt --with-mysql --with-zlib --with-pdo-mysql --enable-calendar --with-gd --with-iconv-dir --enable-mbstring --enable-soap --enable-sockets --enable-zip --with-curl --with-openssl --with-kerberos --with-tidy' Then, using apt-get, I had mysql server and phpMyAdmin installed. Unfortunatelly phpMyAdmin keep saying that 'mysqli' and 'mcrypt' not installed. php -m | grep mysqli just confirms it. So I tried to install mysqli with "apt-get install php5-mysqli", but just got message to do it by means of "php5-mysqlnd" or "php5-mysql". Even though they are already installed (according to phpinfo()) I tried - doesn't work. However, in php.ini, there's mysqli staff like "extension=php_mysqli.dll", but no "extension=mysqli.so". And block [MySQLi] with some uncommented settings also present. Since this is my first attempt to build php from source I reckon I did some silly mistake. Any help is greatly appreciated.

  Read the article

• Using my own Postfix, filtering spam and getting all the mail into my ISP's inbox

  - by djechelon

  Hello, I currently own a domain bought via GoDaddy.com, which provides me a basic email setup for the most common needs. I configured it to forward all mail to [email protected] to [email protected]. I also own a virtual server with a running Postfix that I use for a specific website (all mail to somedomain.com gets forwarded via LMTP to a program written by me). Since I'm recently experiencing some harassing by spammers, since GoDaddy doesn't seem to filter spam, and since my Windows Phone's Pocket Outlook cannot filter spam, I would like to use SpamAssassin to filter inbound spam by changing my domain's MX records to my server My ideal setup is the following: All mail delivered to somedomain.com gets redirected via LMTP as usual via virtual transport without any spam check All mail to [email protected] gets redirected to [email protected] after a severe spam check I don't care about [email protected] since I use just one address for now I would like to train SpamAssassin with customized spam rules, possibly based on the presence of certain keywords (links to certain unsubscribe pages I found recurring) I currently configured Postfix with transport somedomain.com lmtp:[127.0.0.1]:8025 .somedomain.com error: Cannot accept mail for this domain relay somedomain.com OK (I guess I should add mydomain.com OK too) virtual @mydomain.com [email protected] (looks like a catch-all rule, it's OK as requirement 3) I installed SpamAssassin, I can do rcspamd start and set it to boot with the server, but I don't know if there is anything else to do for use in Postfix, and how to apply requirement 1 (only mail to mydomain.com gets filtered) I also tried to send an email via Telnet to make sure my settings are ready for MX change. I received the message into my account but I found that it gone through secureserver.net, like Postfix didn't rewrite the destination but simply relayed the message. Thank you in advance. I'm no expert in SpamAssassin, and I have little experience in Postfix (enough to avoid making my server an open relay)

  Read the article

• Backup Exec tape rotation guidelines

  - by HannesFostie

  Hi We use Backup Exec to take care of our backups for our data server, exchange server, and one more set of systems. Each of these 3 is being done on a separate "set" of tapes. Our goal is to be able to roll back a full 2 weeks, with 1 full backup each weekend and differential/incremental backups in between (the difference between the two in our case isn't very big, because the employees mostly use a very similar set of files throughout the week). While playing around with the settings on how to achieve this, we set the time for BE to keep the full backup to 14 days, but because we have too much data this would require manual intervention each time to erase a certain tape and use that. What I would like to know is what kind of guidelines, tricks, tips and general "stuff to think about" you keep in mind when designing your backup schedule. The type of backups (full/diff/incr) isn't of that much importance in our case as it's more or less set in stone. Made this community wiki as it's not a very specific question. Thanks in advance!

  Read the article

• Torrent upload ratio not updated on Synology DS212+

  - by user179271

  I have a Synology DS212+ NAS running DSM 4.2-3211 (current version). I use it for several purposes including torrent download using Download Station and a tracker that needs authentication. My problem is that my download/upload ratio isn't updated, so it constantly falls down. My NAS is behind a router, and I configured the NAT to forward ports 6890 to 6999 to the internal IP address of the NAS. Here are the Download Station settings : TCP port : 6990, Sharing ratio : 900%, Sharing time : infinite, max download speed : 0 (no limit), max upload speed : 0 (no limit), BT protocol encryption : checked, max numbers of peers allowed by torrent file : 4000, DHT : checked, with port 6889. When the DHT option is not checked, the NAS doesn't upload any files. I don't know what is this option for. Can someone help me to solve this problem ? Did I miss any step, or does it come from the NAT ? How is the authentication managed by Dowload Station ? (Sorry for my english) Thanks.

  Read the article

< Previous Page | 411 412 413 414 415 416 417 418 419 420 421 422  | Next Page >