Search Results

Search found 12488 results on 500 pages for 'hardware upgrade'.

Page 416/500 | < Previous Page | 412 413 414 415 416 417 418 419 420 421 422 423  | Next Page >

  • NFS server generating "invalid extent" on EXT4 system disk?

    - by Stephen Winnall
    I have a server running Xen 4.1 with Oneiric in the dom0 and each of the 4 domUs. The system disks of the domUs are LVM2 volumes built on top of an mdadm RAID1. All the domU system disks are EXT4 and are created using snapshots of the same original template. 3 of them run perfectly, but one (called s-ub-02) keeps on being remounted read-only. A subsequent e2fsck results in a single "invalid extent" diagnosis: e2fsck 1.41.14 (22-Dec-2010) /dev/domu/s-ub-02-root contains a file system with errors, check forced. Pass 1: Checking inodes, blocks, and sizes Inode 525418 has an invalid extent (logical block 8959, invalid physical block 0, len 0) Clear<y>? yes Pass 2: Checking directory structure Pass 3: Checking directory connectivity Pass 4: Checking reference counts Pass 5: Checking group summary information /dev/domu/s-ub-02-root: 77757/655360 files (0.3% non-contiguous), 360592/2621440 blocks The console shows typically the following errors for the system disk (xvda2): [101980.903416] EXT4-fs error (device xvda2): ext4_ext_find_extent:732: inode #525418: comm apt-get: bad header/extent: invalid extent entries - magic f30a, entries 12, max 340(340), depth 0(0) [101980.903473] EXT4-fs (xvda2): Remounting filesystem read-only I have created new versions of the system disk. The same thing always happens. This, and the fact that the disk is ultimately on a RAID1, leads me to preclude a hardware disk error. The only obvious distinguishing feature of this domU is the presence of nfs-kernel-server, so I suspect that. Its exports file looks like this: /exports/users 192.168.0.0/255.255.248.0(rw,sync,no_subtree_check) /exports/media/music 192.168.0.0/255.255.248.0(rw,sync,no_subtree_check) /exports/media/pictures 192.168.0.0/255.255.248.0(rw,sync,no_subtree_check) /exports/opt 192.168.0.0/255.255.248.0(rw,sync,no_subtree_check) /exports/users and /exports/opt are LVM2 volumes from the same volume group as the system disk. /exports/media is an EXT2 volume. (There is an issue where clients see /exports/media/pictures as being a read-only volume, which I mention for completeness.) With the exception of the read-only problem, the NFS server appears to work correctly under light load for several hours before the "invalid extent" problem occurs. There are no helpful entries in /var/log. All of a sudden, no more files are written, so you can see when the disk was remounted read-only, but there is no indication of what the cause might be. Can anyone help me with this problem? Steve

    Read the article

  • ALSA samples capture: cannot open device

    - by Randagio
    I'm quite new to Linux (Lubuntu 12.04 for sake of precision) and ALSA programming at all. I'm trying to write a C program to capture audio from internal PC microphone for processing it. So as first step I google a bit and I found this article for capturing audio samples A tutorial on using the ALSA Audio API but when I compile it and execute it with: ./capture "default" or ./capture "hw:0,0" and all the possible variants on theme it always raises the error: cannot open device hw:0,0 (no such file or directory). So the issue is: what is the name of the mic audio device to pass as parameter to record the audio from mic ? The mic is working ok because the Sound Recorder program records sounds perfectly and I can playback them. The output of the aplay -l is the following : **** List of PLAYBACK Hardware Devices **** card 0: I82801DBICH4 [Intel 82801DB-ICH4], device 0: Intel ICH [Intel 82801DB-ICH4] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: I82801DBICH4 [Intel 82801DB-ICH4], device 4: Intel ICH - IEC958 [Intel 82801DB-ICH4 - IEC958] Subdevices: 1/1 Subdevice #0: subdevice #0 and this is the amixer output (cut) Simple mixer control 'Master',0 Capabilities: pvolume pswitch penum Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 31 [100%] [0.00dB] [on] Front Right: Playback 31 [100%] [0.00dB] [on] Simple mixer control 'Master Mono',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum Playback channels: Mono Limits: Playback 0 - 31 Mono: Playback 4 [13%] [-40.50dB] [on] Simple mixer control 'PCM',0 Capabilities: pvolume pswitch penum Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 31 [100%] [12.00dB] [on] Front Right: Playback 31 [100%] [12.00dB] [on] Simple mixer control 'CD',0 Capabilities: pvolume pswitch cswitch cswitch-exclusive penum Capture exclusive group: 0 Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off] Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off] Simple mixer control 'Mic',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch cswitch-exclusive penum Capture exclusive group: 0 Playback channels: Mono Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Playback 22 [71%] [-1.50dB] [on] Front Left: Capture [on] Front Right: Capture [on] Simple mixer control 'Mic Boost (+20dB)',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [off] Simple mixer control 'Mic Select',0 Capabilities: enum Items: 'Mic1' 'Mic2' Item0: 'Mic1' Simple mixer control 'Stereo Mic',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [off] so for aplay it seems I have no recording device, but for amixer I've got the mic, a mic boost and mic stereo as well with all those gorgeous stuffs on their place !!. If so, how could my Sound Recorder record the audio without any problem at all ?!?! For sure I'm giving the wrong device name to the command line for capturing audio but I'm loosing the hope for finding the correct one ! Please help....before I tear my hair out !!!

    Read the article

  • OBIA on Teradata - Part 2 Teradata DB Utilization for ETL

    - by Mohan Ramanuja
    Techniques to Monitor Queries and ETL Load CPU and Disk I/OSelect username, processor, sum(cputime), sum(diskio) from dbc.ampusage where processor ='1-0' order by 2,3 descgroup by 1,2;UserName    Vproc    Sum(CpuTime)    Sum(DiskIO)AC00916        10    6.71            24975 List Hardware ErrorsThere is a possibility that the system might have adequate disk space but out of free cylinders. In order to monitor hardware errors, the following query was used:Select * from dbc.Software_Event_Log where Text like '%restart%' order by thedate, thetime;For active users, usage of CPU and analysis of bad CPU to I/O ratiosSelect * from DBC.AMPUSAGE where username='CRMSTGC_DEV_ID';  AND SUBSTR(ACCOUNTNAME,6,3)='006'; Usage By I/OSelect AccountName, UserName, sum(CpuTime), sum(DiskIO)  from DBC.AMPUSAGE group by AccountName, UserName Order by Sum(DiskIO) desc; AccountName                       UserName                          Sum(CpuTime)  Sum(DiskIO)$M1$10062209                      AB89487                           374628.612    7821847$M1$10062210                      AB89487                           186692.244    2799412$M1$10062213                      COC_ETL_ID                        119531.068    331100426$M1$10062200                      AB63472                           118973.316    109881984$M1$10062204                      AB63472                           110825.356    94666986$M1$10062201                      AB63472                           110797.976    75016994$M1$10062202                      AC06936                           100924.448    407839702$M1$10062204                      AB67963                           0         4$M1$10062207                      AB91990                           0         2$M1$10062208                      AB63461                           0         24$M1$10062211                      AB84332                           0         6$M1$10062214                      AB65484                           0         8$M1$10062205                      AB77529                           0         58$M1$10062210                      AC04768                           0         36$M1$10062206                      AB54940                           0         22 Usage By CPUSelect AccountName, UserName, sum(CpuTime), sum(DiskIO)  from DBC.AMPUSAGE group by AccountName, UserName Order by Sum(CpuTime) desc;AccountName                       UserName                          Sum(CpuTime)  Sum(DiskIO)$M1$10062209                      AB89487                           374628.612    7821847$M1$10062210                      AB89487                           186692.244    2799412$M1$10062213                      COC_ETL_ID                        119531.068    331100426$M1$10062200                      AB63472                           118973.316    109881984$M1$10062204                      AB63472                           110825.356    94666986$M1$10062201                      AB63472                           110797.976    75016994$M2$100622105813004760047LOAD     T23_ETLPROC_ENT                   0 6$M1$10062215                      AA37720                           0     180$M1$10062209                      AB81670                           0     6Select count(distinct vproc) from dbc.ampusage;432select * from dbc.dbcinfo;AccountName     UserName     CpuTime DiskIO  CpuTimeNorm         Vproc VprocType    Model$M1$10062205                      CRM_STGC_DEV_ID                   0.32    1764    12.7423999023438    0     AMP      2580$M1$10062205                      CRM_STGC_DEV_ID                   0.28    1730    11.1495999145508    3     AMP      2580$M1$10062205                      CRM_STGC_DEV_ID                   0.304    1736    12.1052799072266    4    AMP      2580$M1$10062205                      CRM_STGC_DEV_ID                   0.248    1731    9.87535992431641    7    AMP      2580$M1$10062205                      CRM_STGC_DEV_ID                   0.332    1731    13.2202398986816    8    AMP      2580$M1$10062205                      CRM_STGC_DEV_ID                   0.284    1712    11.3088799133301    11   AMP      2580$M1$10062205                      CRM_STGC_DEV_ID                   0.24    1757    9.55679992675781    12    AMP      2580$M1$10062205                      CRM_STGC_DEV_ID                   0.292    1737    11.6274399108887    15   AMP      2580$M1$10062205                      CRM_STGC_DEV_ID                   0.268    1753    10.6717599182129    16   AMP      2580$M1$10062205                      CRM_STGC_DEV_ID                   0.276    1732    10.9903199157715    19   AMP      2580select * from dbc.dbcinfo;InfoKey    InfoDataLANGUAGE   SUPPORT           MODE    StandardRELEASE    12.00.03.03VERSION    12.00.03.01a

    Read the article

  • Converting a PV vm back into an HVM vm

    - by wim.coekaerts
    I have been doing some Oracle VM benchmark stuff in the last week or 2 in my off hours and yesterday I wanted to convert one of my VMs that was based on a paravirt kernel into a vm that just boots as a regular hardware virt VM with a standard x86-64 kernel. It took me a little while to figure out the fastest way so now that I have it pretty much down I wanted to share the steps. A PV kernel uses pygrub and a paravirt kernel image that lives on the vm image virtual disk. since this disk image does not have to be bootable it doesn't contain a boot sector and if you just restart the VM in hvm mode the virtual bios will just not do much as it can't start the boot process from disk The first thing I do is make a backup of my vm.cfg file :-) and then edit it as follows : the original file contains : bootloader = '/usr/bin/pygrub' I replace that with : acpi = 1 apic = 1 builder = 'hvm' device_model = '/usr/lib/xen/bin/qemu-dm' kernel = '/usr/lib/xen/boot/hvmloader' then changing the disk files. I change my xvd disks to hd disks and I copy over the iso image of my instal lDVD. In the case of my VM template it was based on OL5U4 So I downloaded Enterprise-R5-U4-Server-x86_64-dvd.iso and added it as a cd device. disk = ['file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/System.img,xvda,w', 'file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/Oracle11202RAC_x86_64-xvdb.img,xvdb,w', ] to disk = ['file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/System.img,hda,w', 'file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/Oracle11202RAC_x86_64-xvdb.img,hdb,w', 'file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/Enterprise-R5-U4-Server-x86_64-dvd.iso, hdc:cdrom,r', ] boot='d' for the network devices (vifs) I change : vif = ['bridge=xenbr2,type=netfront'] to vif = ['bridge=xenbr2,type=ioemu'] That should do it. Next, inside the VM, I copy over the regular kernel rpm that I want to end up running in hvm mode. In this example case it was : kernel-2.6.18-164.0.0.0.1.el5.x8664.rpm. I will use that later on in the process. I put this kernel simply in /root At this point I just start the vm with xm create vm.cfg and start my vnc console to the vm console. Oracle Linux will boot from the iso image, I just go through the install steps and click on UPgrade existing (not re-install). Because the VM is the same as the ISO the install won't actually do anything and it will run through instantly. When the "Reboot" button pops up, don't reboot. Switch to the command prompt console. hi alt-f2 to go to the shell prompt. Now it's easy : umount /mnt/sysimage/boot cd /mnt/sysimage chroot . mount /dev/hda1 (if that was your /boot partition) export PATH=/sbin:$PATH (just to clean that up) edit /etc/modprobe.conf and comment out the xen modules (just put a # in front) Install grub. if your /boot is hda1 then that is (hd0,0) $ grub root (hd0,0) setup (hd0) exit grub now you have a good bootsector, grub installed and you have your grub.conf file Install the new kernel cd root (this is your old /root in your pv image) rpm -ivh remove (or comment out) boot='d' in your vm.cfg restart the VM and you should be good to go, regular grub should start and load your environment. Caveats : this assumes you used labels for your filesystems. if /etc/fstab were to have devices listed then you would have to rename these device before rebooting as well. If you had a /dev/xvda disk then this would be /dev/hda or /dev/sda. All in all it is a relatively short and simple process.

    Read the article

  • Converting a PV vm back into an HVM vm

    - by wim.coekaerts
    I have been doing some Oracle VM benchmark stuff in the last week or 2 in my off hours and yesterday I wanted to convert one of my VMs that was based on a paravirt kernel into a vm that just boots as a regular hardware virt VM with a standard x86-64 kernel. It took me a little while to figure out the fastest way so now that I have it pretty much down I wanted to share the steps. A PV kernel uses pygrub and a paravirt kernel image that lives on the vm image virtual disk. since this disk image does not have to be bootable it doesn't contain a boot sector and if you just restart the VM in hvm mode the virtual bios will just not do much as it can't start the boot process from disk The first thing I do is make a backup of my vm.cfg file :-) and then edit it as follows : the original file contains : bootloader = '/usr/bin/pygrub' I replace that with : acpi = 1 apic = 1 builder = 'hvm' device_model = '/usr/lib/xen/bin/qemu-dm' kernel = '/usr/lib/xen/boot/hvmloader' then changing the disk files. I change my xvd disks to hd disks and I copy over the iso image of my instal lDVD. In the case of my VM template it was based on OL5U4 So I downloaded Enterprise-R5-U4-Server-x86_64-dvd.iso and added it as a cd device. disk = ['file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/System.img,xvda,w', 'file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/Oracle11202RAC_x86_64-xvdb.img,xvdb,w', ] to disk = ['file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/System.img,hda,w', 'file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/Oracle11202RAC_x86_64-xvdb.img,hdb,w', 'file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/Enterprise-R5-U4-Server-x86_64-dvd.iso, hdc:cdrom,r', ] boot='d' for the network devices (vifs) I change : vif = ['bridge=xenbr2,type=netfront'] to vif = ['bridge=xenbr2,type=ioemu'] That should do it. Next, inside the VM, I copy over the regular kernel rpm that I want to end up running in hvm mode. In this example case it was : kernel-2.6.18-164.0.0.0.1.el5.x8664.rpm. I will use that later on in the process. I put this kernel simply in /root At this point I just start the vm with xm create vm.cfg and start my vnc console to the vm console. Oracle Linux will boot from the iso image, I just go through the install steps and click on UPgrade existing (not re-install). Because the VM is the same as the ISO the install won't actually do anything and it will run through instantly. When the "Reboot" button pops up, don't reboot. Switch to the command prompt console. hi alt-f2 to go to the shell prompt. Now it's easy : umount /mnt/sysimage/boot cd /mnt/sysimage chroot . mount /dev/hda1 (if that was your /boot partition) export PATH=/sbin:$PATH (just to clean that up) edit /etc/modprobe.conf and comment out the xen modules (just put a # in front) Install grub. if your /boot is hda1 then that is (hd0,0) $ grub root (hd0,0) setup (hd0) exit grub now you have a good bootsector, grub installed and you have your grub.conf file Install the new kernel cd root (this is your old /root in your pv image) rpm -ivh remove (or comment out) boot='d' in your vm.cfg restart the VM and you should be good to go, regular grub should start and load your environment. Caveats : this assumes you used labels for your filesystems. if /etc/fstab were to have devices listed then you would have to rename these device before rebooting as well. If you had a /dev/xvda disk then this would be /dev/hda or /dev/sda. All in all it is a relatively short and simple process.

    Read the article

  • Chargeback and showback...both a 'throw back'

    - by llaszews
    Been getting asked again by customers and partners about chargeback and showback in the cloud so thought I would blog on my response to this question. Charge Back background, information and industry analysis: Cloud computing is all about shared resources. These shared resources are computer servers (including memory and CPU), network devices, hard disk storage, database servers, application servers, cooling, floor space, electricity and more. These resources are shared by departments within a company, or by a number of companies, when resources are hosted in the public or hybrid cloud. Currently, hosting providers that run other companies on their cloud platforms do not have an accurate way to measure the shared computing resources used by a specific user let alone used by a specific customer. Additionally, companies running their own cloud data centers, for private or hybrid clouds, have no way of measure and charging back the departments in the company that are using these shared cloud resources. In both cases, the lack of determine shared resource costs and to charge them back to the company, department or user that is using this resources is limited a clear measure of business benefit and impacting company’s ability to measure the Return on Investment (ROI). An IT chargeback system is an accounting strategy that applies the costs of IT services, hardware or software to the business unit in which they are used. This system contrasts with traditional IT accounting models in which a centralized department bears all of the IT costs in an organization and those costs are treated simply as corporate overhead. Showback involves showing the IT costs to a department or customer but not actually charging them for their IT usage. Showback is a gradual method of introducing chargeback into an enterprise. Most companies implement a show back mechanism before a full chargeback system is put in place. Oracle chargeback product: Oracle Enterprise Manager provides tools for defining detailed Chargeback plans spanning different metrics collected for each type of resources as well as defining Cost Centers for grouping costs across multiple developers. Chargeback plans can use not only usage based costs, but also configuration based costs (e.g. version of the platform) or fixed costs (e.g. flat-rate management fee). Chargeback has rich out of the box reports. Trending reports show how charge and resource consumption varies over time, while Summary reports show the breakdown of charges or usage by different dimensions such as Cost Center or Target Type. These reports help consumers in understanding how their charges relate to their consumption and also assist the IT department with budgeting and planning activities. With BI Publisher, the reports can be made available in a variety of formats such as PDF, HTML, Word, Excel or PowerPoint.

    Read the article

  • Getting Started with Kinect for Windows.

    - by Vishal
    Hello folks,      Recently I got involved in a project for building a demo application for one of our customers with Kinect for Windows. Yes, something similar what Tom Cruise did in the movie Minority Report. Waving arms, moving stuff around, swipes, speech recognition, manipulating computer screens without even touching it. Pretty cool!!! The idea in the movie showed us how technology would be after 50 years from that day.   Minority Report Movie clip.           Well, that 50 years of time frame got squeezed and recently on Feb 1st 2012, Microsoft released the official Kinect for Windows SDK. That’s just 10 years from the movie release. Although, the product is in it early stages but with developer creativity and continuously improving hardware, those features shown in the movie are not very far away from becoming a reality. Soon after releasing the SDK, Microsoft again announced in March the release of its new Kinect for Windows SDK version 1.5 which is coming out in sometime May. More history about Kinect. Anyways, so for a newbie with Kinect, where would you start. Here is what I would suggest you can do. Watch the Kinect for Windows Quick start Series by Den Fernandez. Download the Kinect for Windows SDK and start playing around with the demos in it. It also comes with some basic Kinect documentation. Coding4Fun Kinect Projects | Lot many more videos and open sources projects information. Kinect for Windows Session at Techdays NL demo by Jesus Rodriguez. Book: Beginning Kinect Programming with the Microsoft Kinect SDK.  | I did go through few of the chapters in this book and based on that, it does talk deeply about core Kinect concepts but in very easy to understand way. I would definitely suggest this book for any Kinect developers. I liked the way it explained the Gestures recognition in Chapter 6. Buy your Kinect device from either Amazon or NewEgg. You will get it cheaper then buying it from Microsoft Store. Personally, I love Newegg.com as I never had any order related or shipping issues with them. I always hate developing UI application but well, you would need to get your hands dirty with WPF too in order to work with Kinect. So get started with WPF concepts too. I will keep adding stuff to the list once I come across them but so far the above list would definitely get you started building your first Kinect apps. Till then Happy Kinecting…!!!!! Thanks, Vishal Mody

    Read the article

  • 13 Lösungen für eine höhere Sicherheit in einer Oracle Datenbank (Best Practices)

    - by C.Muetzlitz
    Externe Einflüsse wie Gesetze fordern die IT auf, (unsere) Daten zu schützen. Doch wie prüft man die eingestellte Sicherheit einer Oracle Datenbank überhaupt? Ist die geforderte Sicherheit ausreichend umgesetzt und zwar im Idealfall entsprechend dem notwendigen Schutzbedarf? Wann haben Sie eigentlich die Sicherheit Ihrer Oracle Datenbank das letzte Mal überprüft? Und noch besser gefragt, kennen Sie die Bedrohungen und die davon abgeleiteten Risiken? Alles Fragen deren Antworten ein verantwortlicher Anwendungsbesitzer sofort parat haben sollte oder sehen Sie das anders? Wie kann man sich am besten vor Bedrohungen schützen? Die einzige richtige Antwort auf diese Frage ist, durch Informationen und daraus abgeleitetes Wissen. Nun umfassen Informationen und das darin versteckte Wissen wahrscheinlich sehr viele Quellen. D.h. es wird immer schwieriger sich das richtige Wissen anzueignen und dieses Wissen für den Schutz von Daten und Datenbanken anzuwenden.Betrachtet man die Oracle Datenbank, dann empfehle ich zwei wesentliche Bereiche, die man tun muss bzw. wissen sollte. Die Best Practices Lösungen kennen, die man implementieren sollte und teilweise muss, um gute Sicherheit zu garantieren.Ich nenne diesen Bereich „13 Lösungen für eine höhere Sicherheit in einer Oracle Datenbank (Best Practices)“ Wie sieht der wirkliche Sicherheitszustand einer Oracle Datenbank aus.Diesen Bereich nenne ich „Check Oracle DB Security“ In diesem Beitrag möchte ich Sie nun in die Grundlagen einer guten Oracle Datenbank Sicherheit einführen und Sie befähigen, den Sicherheitszustand Ihrer Datenbank selber bestimmen zu können. 13 Lösungen für eine höhere Sicherheit in einer Oracle Datenbank (Best Practices)“  Password-Management aktiveren:Seien Sie sich bewusst, dass schwache Passwords eine hohe Bedrohung bedeuten. Aktivieren Sie ein vernünftiges Password Management Kennen Sie den Funktionsumfang Ihrer aktuellen Datenbank Version, auch die Funktionen, die nicht mehr unterstützt werden.Der "New Feature und Upgrade Guide" sollte eine Pflichtlektüre werden. Implementieren Sie eine passende Mindestsicherheit.Oracle liefert hier viele Vorgaben. Haben Sie das Rollen- und Account Management im GriffHier geht es um eine kontrollierte Privilegien-Vergabe (Least Privileg), eine Zwecktrennung im Account Management und eine andauernde Überprüfung des Rollenmanagements und Zugriffskonzepts Sicheres Datenbank Link Konzept implementierenGerade im Bereich der Datenintegration werden wiederholt DB Links in der Datenbank konfiguriert. Diese Links eröffnen u.U. unkontrollierte Zugriffe auf entfernte Datenbanken. Tracken Sie den Zugriff und setzen Sie ein sicheres DB Link Konzept um. Oracle liefert hier die entsprechenden Vorgaben. Definieren Sie Schutz-Policies für Ihre Anwendungen.Hierunter fällt z.B. ein richtiges Anwendungs-Owner und Anwendungs-User Setup Implementieren Sie den notwendigen Datenschutz für wichtige DatenKennen Sie die Daten, die geschützt werden müssen und schützen Sie diese angemessen. Kontrollieren Sie den Ressourcenverbrauch in Ihrer Datenbank Implementieren Sie eine sinnvolle Zwecktrennung in der DatenbankAuch bei der Datenbank ist es sinnvoll eine Zwecktrennung zu implementieren. Schalten Sie eine sinnvolle und gesetzeskonforme Protokollierung ein.Gesetze erfordern das und Oracle gibt eine Mindestprotokollierung vor. Implementieren Sie Prozesse, die den guten Zustand der Datenbank erhalten Führen Sie regelmäßige Health- Checks durchOracle liefert z.B. mit dem Enterprise Manager eine vollständige Library. Definieren Sie ein funktionierendes Patch-ManagementKennen Sie die Critical Patch Updates und handeln Sie falls notwendig. Check Oracle DB Security oder wer den Sicherheitszustand nicht kennt, wird auch keine Maßnahmen ergreifen Den Sicherheitszustand einer Oracle Datenbank zu überprüfen, ist sehr wichtig. Hierfür kann man verschiedene Anwendungen nutzen, die im Markt erhältlich sind. Eine gute Entscheidung wäre z.B. den Oracle Enterprise Manager (Cloud Control) mit dem Lifecycle Management zu nutzen, der periodisch den Sicherheitszustand für Sie ermittelt. Eine manuelle Überprüfung ist auch möglich, erfordert aber tiefes Wissen. Doch auch trotz der hohen Wissensanforderung ist ein Verstehen, wie man eine Oracle Datenbank manuell auf Sicherheit überprüft, wichtig. Vertrauen Sie nicht mehr auf Vermutungen, sondern nehmen Sie die Sicherheit Ihrer Datenbank ernst und lernen Sie den realen Zustand Ihrer Datenbank kennen. Wissen über reale Zustände und Wissen über geeignete Konzepte schützen. Erst dann können Sie entscheiden, welche Maßnahmen tatsächlich notwendig sind. Weiterführende Informationen: Oracle Online Dokumentation für die Datenbank Verschiedene Artikel in der Knowledge Base vom Oracle Support Das neue Buch „Oracle Security in der Praxis. Vollständige Sicherheitsüberprüfung Ihrer Oracle Datenbank“.

    Read the article

  • Cannot get Virtualbox to install properly on Ubuntu 12.04

    - by lopac1029
    I cannot get Virtualbox to install properly on my 12.04. I first went with a manual install for the .deb from the old builds section of the Virtualbox page. That .deb opened up the Software Center and installed. Then I got the error coming up of VT-x/AMD-V hardware acceleration is not available on your system. Your 64-bit guest will fail to detect a 64-bit CPU and will not be able to boot. which I can only assume was due to my Ubuntu version being 32-bit (System Details - Overview - OC type: 32-bit, right?) So I followed these instructions to remove the .deb manually, restarted my laptop, and then FOUND the actual Virtualbox install in the Software Center and installed from that (assuming it would give me the correct version I need for my system) So after all that (and then some), I'm still getting the same error when I connect to my new job's project in Virtualbox. Can anyone point me in the right direction of what to do here? This is the first time I've ever worked with Virtualbox, and no one at this company is using Ubuntu, so I'm on my own here. EDIT: Here is the direct info from running the 2 suggested commands Inspiron-1750-brick:~ $lscpu Architecture: i686 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 2 On-line CPU(s) list: 0,1 Thread(s) per core: 1 Core(s) per socket: 2 Socket(s): 1 Vendor ID: GenuineIntel CPU family: 6 Model: 23 Stepping: 10 CPU MHz: 2100.000 BogoMIPS: 4189.45 L1d cache: 32K L1i cache: 32K L2 cache: 2048K Inspiron-1750-brick:~ $cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU T6500 @ 2.10GHz stepping : 10 microcode : 0xa07 cpu MHz : 1200.000 cache size : 2048 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm dtherm bogomips : 4189.80 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU T6500 @ 2.10GHz stepping : 10 microcode : 0xa07 cpu MHz : 1200.000 cache size : 2048 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm dtherm bogomips : 4189.45 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management:

    Read the article

  • Columnstore Case Study #1: MSIT SONAR Aggregations

    - by aspiringgeek
    Preamble This is the first in a series of posts documenting big wins encountered using columnstore indexes in SQL Server 2012 & 2014.  Many of these can be found in this deck along with details such as internals, best practices, caveats, etc.  The purpose of sharing the case studies in this context is to provide an easy-to-consume quick-reference alternative. Why Columnstore? If we’re looking for a subset of columns from one or a few rows, given the right indexes, SQL Server can do a superlative job of providing an answer. If we’re asking a question which by design needs to hit lots of rows—DW, reporting, aggregations, grouping, scans, etc., SQL Server has never had a good mechanism—until columnstore. Columnstore indexes were introduced in SQL Server 2012. However, they're still largely unknown. Some adoption blockers existed; yet columnstore was nonetheless a game changer for many apps.  In SQL Server 2014, potential blockers have been largely removed & they're going to profoundly change the way we interact with our data.  The purpose of this series is to share the performance benefits of columnstore & documenting columnstore is a compelling reason to upgrade to SQL Server 2014. App: MSIT SONAR Aggregations At MSIT, performance & configuration data is captured by SCOM. We archive much of the data in a partitioned data warehouse table in SQL Server 2012 for reporting via an application called SONAR.  By definition, this is a primary use case for columnstore—report queries requiring aggregation over large numbers of rows.  New data is refreshed each night by an automated table partitioning mechanism—a best practices scenario for columnstore. The Win Compared to performance using classic indexing which resulted in the expected query plan selection including partition elimination vs. SQL Server 2012 nonclustered columnstore, query performance increased significantly.  Logical reads were reduced by over a factor of 50; both CPU & duration improved by factors of 20 or more.  Other than creating the columnstore index, no special modifications or tweaks to the app or databases schema were necessary to achieve the performance improvements.  Existing nonclustered indexes were rendered superfluous & were deleted, thus mitigating maintenance challenges such as defragging as well as conserving disk capacity. Details The table provides the raw data & summarizes the performance deltas. Logical Reads (8K pages) CPU (ms) Durn (ms) Columnstore 160,323 20,360 9,786 Conventional Table & Indexes 9,053,423 549,608 193,903 ? x56 x27 x20 The charts provide additional perspective of this data.  "Conventional vs. Columnstore Metrics" document the raw data.  Note on this linear display the magnitude of the conventional index performance vs. columnstore.  The “Metrics (?)” chart expresses these values as a ratio. Summary For DW, reports, & other BI workloads, columnstore often provides significant performance enhancements relative to conventional indexing.  I have documented here, the first in a series of reports on columnstore implementations, results from an initial implementation at MSIT in which logical reads were reduced by over a factor of 50; both CPU & duration improved by factors of 20 or more.  Subsequent features in this series document performance enhancements that are even more significant. 

    Read the article

  • Open port in gufw is closed, no incoming connection on deluge

    - by user66987
    I have a problem configuring gufw. I open ports on it, but when i test in deluge it shows as closed. Any help on setting up the firewall would be greatly appreciated. This is the output I get on the firewall in terminal: Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 127.0.0.1:53 0.0.0.0:* LISTEN 1346/dnsmasq tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 970/cupsd tcp 0 0 0.0.0.0:55521 0.0.0.0:* LISTEN 17362/python tcp6 0 0 ::1:631 :::* LISTEN 970/cupsd tcp6 0 0 :::55521 :::* LISTEN 17362/python udp 0 0 10.0.0.125:1900 0.0.0.0:* 17362/python udp 0 0 127.0.0.1:1900 0.0.0.0:* 17362/python udp 0 0 0.0.0.0:1900 0.0.0.0:* 17362/python udp 0 0 127.0.0.1:53162 0.0.0.0:* 17362/python udp 0 0 127.0.0.1:53 0.0.0.0:* 1346/dnsmasq udp 0 0 0.0.0.0:68 0.0.0.0:* 1312/dhclient udp 0 0 10.0.0.125:36948 0.0.0.0:* 17362/python udp 0 0 0.0.0.0:37240 0.0.0.0:* 17362/python udp 0 0 10.0.0.125:6771 0.0.0.0:* 17362/python udp 0 0 127.0.0.1:6771 0.0.0.0:* 17362/python udp 0 0 0.0.0.0:6771 0.0.0.0:* 17362/python udp 0 0 10.0.0.125:50034 0.0.0.0:* 17362/python udp 0 0 0.0.0.0:58340 0.0.0.0:* 982/avahi-daemon: r udp 0 0 0.0.0.0:5353 0.0.0.0:* 982/avahi-daemon: r udp 0 0 0.0.0.0:56947 0.0.0.0:* 17362/python udp 0 0 127.0.0.1:57059 0.0.0.0:* 17362/python udp6 0 0 :::49793 :::* 982/avahi-daemon: r udp6 0 0 :::5353 :::* 982/avahi-daemon: r kenneth@kenneth-K53U:~$ sudo ufw status Status: aktive Til Handling Fra --- -------- --- 6881:6891/tcp ALLOW Anywhere 6881:6891/udp ALLOW Anywhere 55521/tcp ALLOW Anywhere 6881:6891/tcp ALLOW Anywhere (v6) 6881:6891/udp ALLOW Anywhere (v6) 55521/tcp ALLOW Anywhere (v6) I also want to be able to use the firewall with linuxdc, so I need other ports open as well. This is connected to the firewall. Because when I turn off the firewall, the port is open. So this is not a problem with my modem. Do I need the firewall? The broadband modem has a hardware firewall. Update: Forgot to add. When my firewall is inactive, it closes ports after a time. So when I use linuxdc, I have to flush iptabels and activating it again. Is this supposed to do this when the firewall is deactivated? Update again: All my ports are closed now, flushing the iptable does not work anymore. I have uninstalled gufw, but still all my ports are closed. And to say it again, this has nothing to do with my broadband modem since it worked when I used windows 7. I need help to open the ports.

    Read the article

  • One Week To Go: OTN Architect Day: Cloud Computing

    - by Bob Rhubart
    One week remains until OTN Architect Day: Cloud Computing kicks of at the spectacular Oracle HQ campus in Redwood Shores, CA. The event is free, and there is still time to register. When: Tuesday July 9, 2013 8:30am - 12:30pm Where: Oracle Conference Center350 Oracle Pkwy Redwood City, CA 94065 Register now. It's free! Here's the latest update to the event agenda: 8:30am - 9:00am Registration and Continental Breakfast 9:00am - 9:45am Keynote 21st Century IT | Dr. James Baty VP, Global Enterprise Architecture Program, Oracle Imagine a time long, long ago. A time when servers were certified and dedicated to specific applications, when anything posted on an enterprise web site was from restricted, approved channels, and when we tried to limit the growth of 'dirty' data and storage. Today, applications are services running in the muti-tenant hybrid cloud. Companies beg their customers to tweet them, friend them, and publicly rate their products. And constantly analyzing a deluge of Internet, social and sensor data is the key to creating the next super-successful product, or capturing an evil terrorist. The old IT architecture was planned, dedicated, stable, controlled, with separate and well-defined roles. The new architecture is shared, dynamic, continuous, XaaS, DevOps. This keynote session describes the challenges and opportunities that the new business / IT paradigms present to the IT architecture and architects. 9:45am - 10:30am Technical Session Oracle Cloud: A Case Study in Building a Cloud | Anbu Krishnaswami Enterprise Architect, Oracle Building a Cloud can be challenging thanks to the complex requirements unique to Cloud computing and the massive scale typically associated with Cloud. Cloud providers can take an Infrastructure as a Service (IaaS) approach and build a cloud on virtualized commodity hardware, or they can take the Platform as a Service (PaaS) path, a service-oriented approach based on pre-configured, integrated, engineered systems. This presentation uses the Oracle Cloud itself as a case study in the use of engineered systems, demonstrating how the technical design of engineered systems is leveraged for building PaaS and SaaS Cloud services and a Cloud management infrastructure. The presentation will also explore the principles, patterns, best practices, and architecture views provided in Oracle's Cloud reference architecture. 10:30 am -10:45 am Break 10:45am-11:30am Technical Session Database as a Service | Markus Michalewicz Senior Principal Product Manager Oracle Real Application Clusters (RAC) New applications are now commonly built in a Cloud model, where the database is consumed as a service, and many established business processes are beginning to migrate to database as a service (DBaaS). This adoption of DBaaS is made possible by the availability of new capabilities in the database that enable resource pooling, dynamic resource management, model-based provisioning, metered use, and effective quality-of-service controls. This session will examine the catalog of database services at a large commercial bank to understand how these capabilities are enabling DBaaS for a wide range of needs within the enterprise. 11:30 am - 12:00 pm Panel Q&A Dr. James Baty, Anbu Krishnaswami, and Markus Michalewicz respond to audience questions. Registration is free, but seating is limited, so register now.

    Read the article

  • One Week To Go: OTN Architect Day: Cloud Computing

    - by Bob Rhubart
    One week remains until OTN Architect Day: Cloud Computing kicks of at the spectacular Oracle HQ campus in Redwood Shores, CA. The event is free, and there is still time to register. When: Tuesday July 9, 2013 8:30am - 12:30pm Where: Oracle Conference Center350 Oracle Pkwy Redwood City, CA 94065 Register now. It's free! Here's the latest update to the event agenda: 8:30am - 9:00am Registration and Continental Breakfast 9:00am - 9:45am Keynote 21st Century IT | Dr. James Baty VP, Global Enterprise Architecture Program, Oracle Imagine a time long, long ago. A time when servers were certified and dedicated to specific applications, when anything posted on an enterprise web site was from restricted, approved channels, and when we tried to limit the growth of 'dirty' data and storage. Today, applications are services running in the muti-tenant hybrid cloud. Companies beg their customers to tweet them, friend them, and publicly rate their products. And constantly analyzing a deluge of Internet, social and sensor data is the key to creating the next super-successful product, or capturing an evil terrorist. The old IT architecture was planned, dedicated, stable, controlled, with separate and well-defined roles. The new architecture is shared, dynamic, continuous, XaaS, DevOps. This keynote session describes the challenges and opportunities that the new business / IT paradigms present to the IT architecture and architects. 9:45am - 10:30am Technical Session Oracle Cloud: A Case Study in Building a Cloud | Anbu Krishnaswami Enterprise Architect, Oracle Building a Cloud can be challenging thanks to the complex requirements unique to Cloud computing and the massive scale typically associated with Cloud. Cloud providers can take an Infrastructure as a Service (IaaS) approach and build a cloud on virtualized commodity hardware, or they can take the Platform as a Service (PaaS) path, a service-oriented approach based on pre-configured, integrated, engineered systems. This presentation uses the Oracle Cloud itself as a case study in the use of engineered systems, demonstrating how the technical design of engineered systems is leveraged for building PaaS and SaaS Cloud services and a Cloud management infrastructure. The presentation will also explore the principles, patterns, best practices, and architecture views provided in Oracle's Cloud reference architecture. 10:30 am -10:45 am Break 10:45am-11:30am Technical Session Database as a Service | Markus Michalewicz Senior Principal Product Manager Oracle Real Application Clusters (RAC) New applications are now commonly built in a Cloud model, where the database is consumed as a service, and many established business processes are beginning to migrate to database as a service (DBaaS). This adoption of DBaaS is made possible by the availability of new capabilities in the database that enable resource pooling, dynamic resource management, model-based provisioning, metered use, and effective quality-of-service controls. This session will examine the catalog of database services at a large commercial bank to understand how these capabilities are enabling DBaaS for a wide range of needs within the enterprise. 11:30 am - 12:00 pm Panel Q&A Dr. James Baty, Anbu Krishnaswami, and Markus Michalewicz respond to audience questions. Registration is free, but seating is limited, so register now.

    Read the article

  • vmware player xorg driver broke after ubuntu 12.04 LTS automatic system update on 06/07/2014

    - by user291828
    I am running Ubuntu 12.04 LTS as a virtual machine on a Windows 7 host using vmware player 6.0.2. On Sat. 06/07/2014, Ubuntu performed an automatic system update as it does regularly, however after reboot, the display driver seems to be broken which causes the screen to split into many identical panels. This pretty much rendered the VM unusable. Below is the log entry for that update from /var/log/apt/history.log It appears that at least one of these updates have caused this problem. The exact same problem has been reported on the vmware forum as well, see https://communities.vmware.com/message/2388776#2388776 So far I have not been able so find a solution. Content in /var/log/apt/history.log Start-Date: 2014-06-07 15:04:46 Commandline: aptdaemon role='role-commit-packages' sender=':1.65' Install: linux-headers-3.2.0-64:amd64 (3.2.0-64.97), linux-image-3.2.0-64-generic:amd64 (3.2.0-64.97), linux-headers-3.2.0-64-generic:amd64 (3.2.0-64.97) Upgrade: iproute:amd64 (20111117-1ubuntu2.1, 20111117-1ubuntu2.3), libknewstuff3-4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libkdeclarative5:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libnepomukquery4a:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libgnutls-openssl27:amd64 (2.12.14-5ubuntu3.7, 2.12.14-5ubuntu3.8), libthreadweaver4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libkdecore5:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libnepomukutils4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libktexteditor4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), linux-generic:amd64 (3.2.0.63.75, 3.2.0.64.76), libkmediaplayer4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libkrosscore4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libgnutls26:amd64 (2.12.14-5ubuntu3.7, 2.12.14-5ubuntu3.8), libgnutls26:i386 (2.12.14-5ubuntu3.7, 2.12.14-5ubuntu3.8), libsolid4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libnepomuk4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libkdnssd4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libkparts4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), kdoctools:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libssl-dev:amd64 (1.0.1-4ubuntu5.13, 1.0.1-4ubuntu5.14), libssl-doc:amd64 (1.0.1-4ubuntu5.13, 1.0.1-4ubuntu5.14), libkidletime4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), linux-headers-generic:amd64 (3.2.0.63.75, 3.2.0.64.76), linux-image-generic:amd64 (3.2.0.63.75, 3.2.0.64.76), libkcmutils4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libkfile4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libkpty4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libkntlm4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libplasma3:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libkemoticons4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), kdelibs-bin:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libkdewebkit5:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libkjsembed4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libkio5:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libkjsapi4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), openssl:amd64 (1.0.1-4ubuntu5.13, 1.0.1-4ubuntu5.14), kdelibs5-data:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), linux-libc-dev:amd64 (3.2.0-63.95, 3.2.0-64.97), libkde3support4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libknotifyconfig4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), kdelibs5-plugins:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libkhtml5:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libkdeui5:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libkdesu5:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libssl1.0.0:amd64 (1.0.1-4ubuntu5.13, 1.0.1-4ubuntu5.14), libssl1.0.0:i386 (1.0.1-4ubuntu5.13, 1.0.1-4ubuntu5.14) End-Date: 2014-06-07 15:09:08

    Read the article

  • As a person getting into mobile development, what's the best mobile platform in terms of profitability? [closed]

    - by Kyle Loman
    I realize this question can range very far so would love to hear any and all opinions on this. However, I'll be honest and say that I have been thinking of this in terms of most profitable. I know how this may sound either way but this is one of my main sticking points. I realize that I'm not guaranteed a single cent and success is never guaranteed but I'm going into this with the thought of making something out of it both financially and also for my own interest. I know that iOS gets a lot of attention on this front but Android commands a lot more market share. However, I know there are drawbacks to Android too, whether it's in the actual development process and programming (though I've heard conflicting reports on this, such as how easy/difficult it is for to address screen res in different devices) or the app ecosystem being flooded. But iOS's app ecosystem has been described as too saturated and harder to compete in for that reason. Since Windows Phone has fewer apps than both of those two, that might be the best place to start in order to be closer to the ground floor of the store and be noticed more? Less saturation = better chances of sales or differentiating? Something like the gold rush during the first years of the iOS App Store (not exactly but at least in concept)? Would it be that despite fewer users on the platform, there's more exposure due to less competition so that may translate to better success at sales? Plus, I know MS is in it for the long haul so I'm not too fearful of something like WebOS going away. Obviously RIM isn't very popular nowadays but I read a recent article that says Blackberry actually has the apps that make the most money, any thoughts on that: http://gigaom.com/mobile/which-mobile-oss-apps-make-most-money-surprise-its-blackberry/ Again, this is all I've heard or known about so if there's anything to add or correct here, please do. In addition, this has actually affected my next personal phone upgrade. I'm eligible for a carrier discount now and I've had my eye on the iPhone 5. However, the Lumia 920 is the one I'm holding out for and I'm open to trying an Android but I'm not sure I can wait that long for any new Nexus or even the Razr HD. Even the new Lumia in November is making me antsy, I'm so close to just getting an iPhone 5. But when I say this has affected my phone choice, I'd want to be able to carry the apps I write with me so that I'm able to pull my phone out to show people without having to carry around a second device to do so. So that's why I'd like to make my personal phone match the main platform I'm developing for. Of course, I will likely expand to other platforms if I gain any decent success but the one I target now would serve well as my personal phone I carry around so that I can use it as a marketing tool, in a sense, showing people my apps if the opportunity presents itself. So what's the best mobile platform to choose, and especially in regards to most lucrative? As said previously, this would influence my personal phone choice greatly. Thanks in advance and I hope this isn't taken the wrong way - I understand there are trade-offs and other factors that may balance this out but making some revenue is key among that. For some background, I have done software development and know programming language concepts so I'm not entirely new to it and I do get the notion of being familiar with these things so that I can translate this skill among a variety of languages but I'm currently just having difficulty choosing my first main mobile platform based on the criteria I've outlined above.

    Read the article

  • SJS AS 9.1 U2 (GF v2 U2) - Patch 25 // GF v2.1 - Patch 19 // Sun GlassFish Enterprise Server v2.1.1 Patch 13

    - by arungupta
    SJS AS 9.1 U2 (GF v2 U2) patch 25 is a commercial (Restricted) patch (see Overview of GFv2) available as part of Oracle's Commercial Support for GlassFish. This release is also patch 19 of GlassFish 2.1 and patch 13 of GlassFish 2.1.1. The file-based patches were released onSep 1, 2011; package-based patches were released on Sep 13, 2011. Release Overview Description SJS AS 9.1 U2 (GFv2 U2) - Patch 25 - File and Package-Based Patch for Solaris SPARC, Solaris x86, Linux, Windows and AIX. GlassFish 2.1 - Patch 19 - File and Package-Based Patch for Solaris SPARC, Solaris x86, Linux, Windows and AIX. GlassFish 2.1.1 - Patch 13 - File and Package-Based Patch for Solaris SPARC, Solaris x86, Linux, Windows and AIX. Patch Ids This release comes in 3 different variants: Package-based patches with HADB • Solaris SPARC - [128640-27] • Solarix i586 - [128641-27] • Linux RPM - [128642-27] File-based patches with HADB • Solaris SPARC - [128643-27] • Solaris i586 - [128644-27] • Linux - [128645-27] • Windows - [128646-27] File based patches without HADB • Solaris SPARC - [128647-27] • Solaris i586 - [128648-27] • Linux - [128649-27] • Windows - [128650-27] • AIX - [137916-27] Update Date Nov 23, 2011 Comment Commercial (for-fee) release with regular bug fixes. This is patch 25 for SJS AS 9.1 U2; it is also patch 19 for GlassFish v2.1 and patch 13 for GlassFish v2.1.1. It contains the fixes from the previous patches plus fixes for 18 unique defects. Status CURRENT Bugs Fixed in this Patch: • [12823919]: RESPONSE BYTECHUNK FLUSH WILL GENERATE A MIMEHEADER WHEN SESSION REPLICATION ON • [12818767]: INTEGRATE NEW GRIZZLY 1.0.40 • [12807660]: BUILD, STAGE AND INTEGRATING HADB • [12807643]: INTEGRATE MQ 4.4 U2 P4 • [12802648]: GLASSFISH BUILD FAILED DUE TO METRO INTEGRATION • [12799002]: JNDI RESOURCE NOT ENABLED IF TARGETTING USING ADMIN GUI ON GF 2.1.1 PATCH 11 • [12794672]: ORG.APACHE.JASPER.RUNTIME.BODYCONTENTIMPL DOES NOT COMPACT CB BUFFER • [12772029]: BUG 12308270 - NEED HOTFIX FROM GF RUNNING OPENSSO • [12749346]: VERSION CHANGES FOR GLASSFISH V2.1.1 PATCH 13 • [12749151]: INTEGRATING METRO 1.6.1-B01 INTO GF 2.1.1 P13 • [12719221]: PORTUNIFICATION WSTCPPROTOCOLFINDER.FIND NULLPOINTEREXCEPTION THROWN • [12695620]: HADB: LOGBUFFERSIZE CALCULATED INCORRECTLY FOR VALUES 120 MB AND THE MEMORY FO • [12687345]: ENVIRONMENT VARIABLE PARSING FOR SUN_APPSVR_NOBACKUP CAN FAIL DEPENDING ENV VARS • [12547651]: GLASSFISH DISPLAY BUG • [12359965]: GEREQUESTURI RETURNS URI WITH NULL PREPENDED INTERMITTENT AFTER UPGRADE • [12308270]: SUNBT7020210 ENHANCE JAXRPC SOAP RESPONSE USE PREVIOUS CONFIGURED NAMESPACE PREF • [12308003]: SUNBT7018895 FAILURE TO DEPLOY OR RUN WEBSERVICE AFTER UPDATING TO GF 2.1.1 P07 • [12246256]: SUNBT6739013 [RN]GLASSFISH/SUN APPLICATION INSTALLER CRASHES ON LINUX Additional Notes: More details about these bugs can be found at My Oracle Support.

    Read the article

  • RPi and Java Embedded GPIO: Sensor Connections for Java Enabled Interface

    - by hinkmond
    Now we're ready to connect the hardware needed to make a static electricity sensor for the Raspberry Pi and use Java code to access it through a GPIO port. First, very carefully bend the NTE312 (or MPF-102) transistor "gate" pin (see the diagram on the back of the package or refer to the pin diagram on the Web). You can see it in the inset photo on the bottom left corner. I bent the leftmost pin of the NTE312 transistor as I held the flat part toward me. That is going to be your antenna. So, connect one of the jumper wires to the bent pin. I used the dark green jumper wire (looks almost black; coiled at the bottom) in the photo. Then push the other 2 pins of the transistor into your breadboard. Connect one of the pins to Pin # 1 (3.3V) on the GPIO header of your RPi. See the diagram if you need to glance back at it. In the photo, that's the orange jumper wire. And connect the final unconnected transistor pin to Pin # 22 (GPIO25) on the RPi header. That's the blue jumper wire in my photo. For reference, connect the LED anode (long pin on a common anode LED/short pin on a common cathode LED, check your LED pin diagram) to the same breadboard hole that is connecting to Pin # 22 (same row of holes where the blue wire is connected), and connect the other pin of the LED to GROUND (row of holes that connect to the black wire in the photo). Test by blowing up a balloon, rubbing it on your hair (or your co-worker's hair, if you are hair-challenged) to statically charge it, and bringing it near your antenna (green wire in the photo). The LED should light up when it's near and go off when you pull it away. If you need more static charge, find a co-worker with really long hair, or rub the balloon on a piece of silk (which is just as good but not as fun). Next blog post is where we do some Java coding to access this sensor on your RPi. Finally, back to software! Ha! Hinkmond

    Read the article

  • Ubuntu 14.04 : Lost my sound randomly tried a few commands and I think I failed

    - by Marc-Antoine Théberge
    I lost my sound the other day and I tried to delete pulseaudio then reinstall, then I tried to delete it and install alsa, It did not work and I had to reinstall everything; overall bad idea... now I can't have any sound. Should I do a fresh install? I don't know how to boot an usb drive with GRUB... Here's my sysinfo System information report, generated by Sysinfo: 2014-05-28 05:45:58 http://sourceforge.net/projects/gsysinfo SYSTEM INFORMATION Running Ubuntu Linux, the Ubuntu 14.04 (trusty) release. GNOME: 3.8.4 (Ubuntu 2014-03-17) Kernel version: 3.13.0-27-generic (#50-Ubuntu SMP Thu May 15 18:08:16 UTC 2014) GCC: 4.8 (i686-linux-gnu) Xorg: 1.15.1 (16 April 2014 01:40:08PM) (16 April 2014 01:40:08PM) Hostname: mark-laptop Uptime: 0 days 11 h 43 min CPU INFORMATION GenuineIntel, Intel(R) Atom(TM) CPU N270 @ 1.60GHz Number of CPUs: 2 CPU clock currently at 1333.000 MHz with 512 KB cache Numbering: family(6) model(28) stepping(2) Bogomips: 3192.13 Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 xtpr pdcm movbe lahf_lm dtherm MEMORY INFORMATION Total memory: 2007 MB Total swap: 1953 MB STORAGE INFORMATION SCSI device - scsi0 Vendor: ATA Model: ST9160310AS HARDWARE INFORMATION MOTHERBOARD Host bridge Intel Corporation Mobile 945GSE Express Memory Controller Hub (rev 03) Subsystem: ASUSTeK Computer Inc. Device 8340 PCI bridge(s) Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode]) Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode]) Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 02) (prog-if 00 [Normal decode]) Intel Corporation 82801 Mobile PCI Bridge (rev e2) (prog-if 01 [Subtractive decode]) Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode]) Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode]) Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 02) (prog-if 00 [Normal decode]) Intel Corporation 82801 Mobile PCI Bridge (rev e2) (prog-if 01 [Subtractive decode]) ISA bridge Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) Subsystem: ASUSTeK Computer Inc. Device 830f IDE interface Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] (rev 02) (prog-if 80 [Master]) Subsystem: ASUSTeK Computer Inc. Device 830f GRAPHIC CARD VGA controller Intel Corporation Mobile 945GSE Express Integrated Graphics Controller (rev 03) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device 8340 SOUND CARD Multimedia controller Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02) Subsystem: ASUSTeK Computer Inc. Device 831a NETWORK Ethernet controller Qualcomm Atheros AR8121/AR8113/AR8114 Gigabit or Fast Ethernet (rev b0) Subsystem: ASUSTeK Computer Inc. Device 8324

    Read the article

  • Partner Blog Series: PwC Perspectives - The Gotchas, The Do's and Don'ts for IDM Implementations

    - by Tanu Sood
    Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:12.0pt; mso-para-margin-left:0in; line-height:12.0pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Arial","sans-serif"; mso-ascii-font-family:Arial; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Arial; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} table.MsoTableMediumList1Accent6 {mso-style-name:"Medium List 1 - Accent 6"; mso-tstyle-rowband-size:1; mso-tstyle-colband-size:1; mso-style-priority:65; mso-style-unhide:no; border-top:solid #E0301E 1.0pt; mso-border-top-themecolor:accent6; border-left:none; border-bottom:solid #E0301E 1.0pt; mso-border-bottom-themecolor:accent6; border-right:none; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Georgia","serif"; color:black; mso-themecolor:text1; mso-ansi-language:EN-GB;} table.MsoTableMediumList1Accent6FirstRow {mso-style-name:"Medium List 1 - Accent 6"; mso-table-condition:first-row; mso-style-priority:65; mso-style-unhide:no; mso-tstyle-border-top:cell-none; mso-tstyle-border-bottom:1.0pt solid #E0301E; mso-tstyle-border-bottom-themecolor:accent6; font-family:"Verdana","sans-serif"; mso-ascii-font-family:Georgia; mso-ascii-theme-font:major-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:major-fareast; mso-hansi-font-family:Georgia; mso-hansi-theme-font:major-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:major-bidi;} table.MsoTableMediumList1Accent6LastRow {mso-style-name:"Medium List 1 - Accent 6"; mso-table-condition:last-row; mso-style-priority:65; mso-style-unhide:no; mso-tstyle-border-top:1.0pt solid #E0301E; mso-tstyle-border-top-themecolor:accent6; mso-tstyle-border-bottom:1.0pt solid #E0301E; mso-tstyle-border-bottom-themecolor:accent6; color:#968C6D; mso-themecolor:text2; mso-ansi-font-weight:bold; mso-bidi-font-weight:bold;} table.MsoTableMediumList1Accent6FirstCol {mso-style-name:"Medium List 1 - Accent 6"; mso-table-condition:first-column; mso-style-priority:65; mso-style-unhide:no; mso-ansi-font-weight:bold; mso-bidi-font-weight:bold;} table.MsoTableMediumList1Accent6LastCol {mso-style-name:"Medium List 1 - Accent 6"; mso-table-condition:last-column; mso-style-priority:65; mso-style-unhide:no; mso-tstyle-border-top:1.0pt solid #E0301E; mso-tstyle-border-top-themecolor:accent6; mso-tstyle-border-bottom:1.0pt solid #E0301E; mso-tstyle-border-bottom-themecolor:accent6; mso-ansi-font-weight:bold; mso-bidi-font-weight:bold;} table.MsoTableMediumList1Accent6OddColumn {mso-style-name:"Medium List 1 - Accent 6"; mso-table-condition:odd-column; mso-style-priority:65; mso-style-unhide:no; mso-tstyle-shading:#F7CBC7; mso-tstyle-shading-themecolor:accent6; mso-tstyle-shading-themetint:63;} table.MsoTableMediumList1Accent6OddRow {mso-style-name:"Medium List 1 - Accent 6"; mso-table-condition:odd-row; mso-style-priority:65; mso-style-unhide:no; mso-tstyle-shading:#F7CBC7; mso-tstyle-shading-themecolor:accent6; mso-tstyle-shading-themetint:63;} Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:12.0pt; mso-para-margin-left:0in; line-height:12.0pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Arial","sans-serif"; mso-ascii-font-family:Arial; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Arial; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} table.MsoTableMediumList1Accent6 {mso-style-name:"Medium List 1 - Accent 6"; mso-tstyle-rowband-size:1; mso-tstyle-colband-size:1; mso-style-priority:65; mso-style-unhide:no; border-top:solid #E0301E 1.0pt; mso-border-top-themecolor:accent6; border-left:none; border-bottom:solid #E0301E 1.0pt; mso-border-bottom-themecolor:accent6; border-right:none; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Georgia","serif"; color:black; mso-themecolor:text1; mso-ansi-language:EN-GB;} table.MsoTableMediumList1Accent6FirstRow {mso-style-name:"Medium List 1 - Accent 6"; mso-table-condition:first-row; mso-style-priority:65; mso-style-unhide:no; mso-tstyle-border-top:cell-none; mso-tstyle-border-bottom:1.0pt solid #E0301E; mso-tstyle-border-bottom-themecolor:accent6; font-family:"Arial Narrow","sans-serif"; mso-ascii-font-family:Georgia; mso-ascii-theme-font:major-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:major-fareast; mso-hansi-font-family:Georgia; mso-hansi-theme-font:major-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:major-bidi;} table.MsoTableMediumList1Accent6LastRow {mso-style-name:"Medium List 1 - Accent 6"; mso-table-condition:last-row; mso-style-priority:65; mso-style-unhide:no; mso-tstyle-border-top:1.0pt solid #E0301E; mso-tstyle-border-top-themecolor:accent6; mso-tstyle-border-bottom:1.0pt solid #E0301E; mso-tstyle-border-bottom-themecolor:accent6; color:#968C6D; mso-themecolor:text2; mso-ansi-font-weight:bold; mso-bidi-font-weight:bold;} table.MsoTableMediumList1Accent6FirstCol {mso-style-name:"Medium List 1 - Accent 6"; mso-table-condition:first-column; mso-style-priority:65; mso-style-unhide:no; mso-ansi-font-weight:bold; mso-bidi-font-weight:bold;} table.MsoTableMediumList1Accent6LastCol {mso-style-name:"Medium List 1 - Accent 6"; mso-table-condition:last-column; mso-style-priority:65; mso-style-unhide:no; mso-tstyle-border-top:1.0pt solid #E0301E; mso-tstyle-border-top-themecolor:accent6; mso-tstyle-border-bottom:1.0pt solid #E0301E; mso-tstyle-border-bottom-themecolor:accent6; mso-ansi-font-weight:bold; mso-bidi-font-weight:bold;} table.MsoTableMediumList1Accent6OddColumn {mso-style-name:"Medium List 1 - Accent 6"; mso-table-condition:odd-column; mso-style-priority:65; mso-style-unhide:no; mso-tstyle-shading:#F7CBC7; mso-tstyle-shading-themecolor:accent6; mso-tstyle-shading-themetint:63;} table.MsoTableMediumList1Accent6OddRow {mso-style-name:"Medium List 1 - Accent 6"; mso-table-condition:odd-row; mso-style-priority:65; mso-style-unhide:no; mso-tstyle-shading:#F7CBC7; mso-tstyle-shading-themecolor:accent6; mso-tstyle-shading-themetint:63;} It is generally accepted among business communities that technology by itself is not a silver bullet to all problems, but when it is combined with leading practices, strategy, careful planning and execution, it can create a recipe for success. This post attempts to highlight some of the best practices along with dos & don’ts that our practice has accumulated over the years in the identity & access management space in general, and also in the context of R2, in particular. Best Practices The following section illustrates the leading practices in “How” to plan, implement and sustain a successful OIM deployment, based on our collective experience. Planning is critical, but often overlooked A common approach to planning an IAM program that we identify with our clients is the three step process involving a current state assessment, a future state roadmap and an executable strategy to get there. It is extremely beneficial for clients to assess their current IAM state, perform gap analysis, document the recommended controls to address the gaps, align future state roadmap to business initiatives and get buy in from all stakeholders involved to improve the chances of success. When designing an enterprise-wide solution, the scalability of the technology must accommodate the future growth of the enterprise and the projected identity transactions over several years. Aligning the implementation schedule of OIM to related information technology projects increases the chances of success. As a baseline, it is recommended to match hardware specifications to the sizing guide for R2 published by Oracle. Adherence to this will help ensure that the hardware used to support OIM will not become a bottleneck as the adoption of new services increases. If your Organization has numerous connected applications that rely on reconciliation to synchronize the access data into OIM, consider hosting dedicated instances to handle reconciliation. Finally, ensure the use of clustered environment for development and have at least three total environments to help facilitate a controlled migration to production. If your Organization is planning to implement role based access control, we recommend performing a role mining exercise and consolidate your enterprise roles to keep them manageable. In addition, many Organizations have multiple approval flows to control access to critical roles, applications and entitlements. If your Organization falls into this category, we highly recommend that you limit the number of approval workflows to a small set. Most Organizations have operations managed across data centers with backend database synchronization, if your Organization falls into this category, ensure that the overall latency between the datacenters when replicating the databases is less than ten milliseconds to ensure that there are no front office performance impacts. Ingredients for a successful implementation During the development phase of your project, there are a number of guidelines that can be followed to help increase the chances for success. Most implementations cannot be completed without the use of customizations. If your implementation requires this, it’s a good practice to perform code reviews to help ensure quality and reduce code bottlenecks related to performance. We have observed at our clients that the development process works best when team members adhere to coding leading practices. Plan for time to correct coding defects and ensure developers are empowered to report their own bugs for maximum transparency. Many organizations struggle with defining a consistent approach to managing logs. This is particularly important due to the amount of information that can be logged by OIM. We recommend Oracle Diagnostics Logging (ODL) as an alternative to be used for logging. ODL allows log files to be formatted in XML for easy parsing and does not require a server restart when the log levels are changed during troubleshooting. Testing is a vital part of any large project, and an OIM R2 implementation is no exception. We suggest that at least one lower environment should use production-like data and connectors. Configurations should match as closely as possible. For example, use secure channels between OIM and target platforms in pre-production environments to test the configurations, the migration processes of certificates, and the additional overhead that encryption could impose. Finally, we ask our clients to perform database backups regularly and before any major change event, such as a patch or migration between environments. In the lowest environments, we recommend to have at least a weekly backup in order to prevent significant loss of time and effort. Similarly, if your organization is using virtual machines for one or more of the environments, it is recommended to take frequent snapshots so that rollbacks can occur in the event of improper configuration. Operate & sustain the solution to derive maximum benefits When migrating OIM R2 to production, it is important to perform certain activities that will help achieve a smoother transition. At our clients, we have seen that splitting the OIM tables into their own tablespaces by categories (physical tables, indexes, etc.) can help manage database growth effectively. If we notice that a client hasn’t enabled the Oracle-recommended indexing in the applicable database, we strongly suggest doing so to improve performance. Additionally, we work with our clients to make sure that the audit level is set to fit the organization’s auditing needs and sometimes even allocate UPA tables and indexes into their own table-space for better maintenance. Finally, many of our clients have set up schedules for reconciliation tables to be archived at regular intervals in order to keep the size of the database(s) reasonable and result in optimal database performance. For our clients that anticipate availability issues with target applications, we strongly encourage the use of the offline provisioning capabilities of OIM R2. This reduces the provisioning process for a given target application dependency on target availability and help avoid broken workflows. To account for this and other abnormalities, we also advocate that OIM’s monitoring controls be configured to alert administrators on any abnormal situations. Within OIM R2, we have begun advising our clients to utilize the ‘profile’ feature to encapsulate multiple commonly requested accounts, roles, and/or entitlements into a single item. By setting up a number of profiles that can be searched for and used, users will spend less time performing the same exact steps for common tasks. We advise our clients to follow the Oracle recommended guides for database and application server tuning which provides a good baseline configuration. It offers guidance on database connection pools, connection timeouts, user interface threads and proper handling of adapters/plug-ins. All of these can be important configurations that will allow faster provisioning and web page response times. Many of our clients have begun to recognize the value of data mining and a remediation process during the initial phases of an implementation (to help ensure high quality data gets loaded) and beyond (to support ongoing maintenance and business-as-usual processes). A successful program always begins with identifying the data elements and assigning a classification level based on criticality, risk, and availability. It should finish by following through with a remediation process. Dos & Don’ts Here are the most common dos and don'ts that we socialize with our clients, derived from our experience implementing the solution. Dos Don’ts Scope the project into phases with realistic goals. Look for quick wins to show success and value to the stake holders. Avoid “boiling the ocean” and trying to integrate all enterprise applications in the first phase. Establish an enterprise ID (universal unique ID across the enterprise) earlier in the program. Avoid major UI customizations that require code changes. Have a plan in place to patch during the project, which helps alleviate any major issues or roadblocks (product and database). Avoid publishing all the target entitlements if you don't anticipate their usage during access request. Assess your current state and prepare a roadmap to address your operations, tactical and strategic goals, align it with your business priorities. Avoid integrating non-production environments with your production target systems. Defer complex integrations to the later phases and take advantage of lessons learned from previous phases Avoid creating multiple accounts for the same user on the same system, if there is an opportunity to do so. Have an identity and access data quality initiative built into your plan to identify and remediate data related issues early on. Avoid creating complex approval workflows that would negative impact productivity and SLAs. Identify the owner of the identity systems with fair IdM knowledge and empower them with authority to make product related decisions. This will help ensure overcome any design hurdles. Avoid creating complex designs that are not sustainable long term and would need major overhaul during upgrades. Shadow your internal or external consulting resources during the implementation to build the necessary product skills needed to operate and sustain the solution. Avoid treating IAM as a point solution and have appropriate level of communication and training plan for the IT and business users alike. Conclusion In our experience, Identity programs will struggle with scope, proper resourcing, and more. We suggest that companies consider the suggestions discussed in this post and leverage them to help enable their identity and access program. This concludes PwC blog series on R2 for the month and we sincerely hope that the information we have shared thus far has been beneficial. For more information or if you have questions, you can reach out to Rex Thexton, Senior Managing Director, PwC and or Dharma Padala, Director, PwC. We look forward to hearing from you. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:12.0pt; mso-para-margin-left:0in; line-height:12.0pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Arial","sans-serif"; mso-ascii-font-family:Arial; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Arial; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Meet the Writers: Dharma Padala is a Director in the Advisory Security practice within PwC.  He has been implementing medium to large scale Identity Management solutions across multiple industries including utility, health care, entertainment, retail and financial sectors.   Dharma has 14 years of experience in delivering IT solutions out of which he has been implementing Identity Management solutions for the past 8 years. Praveen Krishna is a Manager in the Advisory Security practice within PwC.  Over the last decade Praveen has helped clients plan, architect and implement Oracle identity solutions across diverse industries.  His experience includes delivering security across diverse topics like network, infrastructure, application and data where he brings a holistic point of view to problem solving. Scott MacDonald is a Director in the Advisory Security practice within PwC.  He has consulted for several clients across multiple industries including financial services, health care, automotive and retail.   Scott has 10 years of experience in delivering Identity Management solutions. John Misczak is a member of the Advisory Security practice within PwC.  He has experience implementing multiple Identity and Access Management solutions, specializing in Oracle Identity Manager and Business Process Engineering Language (BPEL).

    Read the article

  • Package Version Numbers, why are they so important

    - by Chris W Beal
    One of the design goals of IPS has been to allow people to easily move forward to a supported "Surface" of component. That is to say, when you  # pkg update your system, you get the latest set of components which all work together, based on the packages you already have installed. During development, this has meant simply you update to the latest "build" of the components. (During development, we build everything and publish everything every two weeks). Now we've released Solaris 11 using the IPS technologies, things are a bit more complicated. We need to be able to reflect all the types of Solaris release we are doing. For example Solaris Development builds, Solaris Update builds and "Support Repository Updates" (the replacement for patches) in the version scheme. So simply saying "151" as the build number isn't sufficient to articulate what you are running, or indeed what is available to update to In my previous blog post I talked about creating your own package, and gave an example FMRI of pkg://tools/[email protected],0.5.11-0.0.0 But it's probably more instructive to look at the FMRI of a Solaris package. The package "core-os" contains all the common utilities and daemons you need to use Solaris.  $ pkg info core-os Name: system/core-os Summary: Core Solaris Description: Operating system core utilities, daemons, and configuration files. Category: System/Core State: Installed Publisher: solaris Version: 0.5.11 Build Release: 5.11 Branch: 0.175.0.0.0.2.1 Packaging Date: Wed Oct 19 07:04:57 2011 Size: 25.14 MB FMRI: pkg://solaris/system/[email protected],5.11-0.175.0.0.0.2.1:20111019T070457Z The FMRI is what we will concentrate on here. In this package "solaris" is the publisher. You can use the pkg publisher command to see where the solaris publisher gets it's bits from $ pkg publisher PUBLISHER TYPE STATUS URI solaris origin online http://pkg.oracle.com/solaris/release/ So we can see we get solaris packages from pkg.oracle.com.  The package name is system/core-os. These can be arbitrary length, just to allow you to group similar packages together. Now on the the interesting? bit, the versions, everything after the @ is part of the version. IPS will only upgrade to a "higher" version. [email protected],5.11-0.175.0.0.0.2.1:20111019T070457Z core-os = Package Name0.5.11 = Component - in this case we're saying it's a SunOS 5.11 package, = separator5.11 = Built on version - to indicate what OS version you built the package on- = another separator0.175.0.0.0.2.1 = Branch Version : = yet another separator20111019T070457Z = Time stamp when the package was published So from that we can see the Branch Version seems rather complex. It is necessarily so, to allow us to describe the hierachy of releases we do In this example we see the following 0.175: is known as the trunkid, and is incremented each build of a new release of Solaris. During Solaris 11 this should not change  0: is the Update release for Solaris. 0 for FCS, 1 for update 1 etc 0: is the SRU for Solaris. 0 for FCS, 1 for SRU 1 etc 0: is reserved for future use 2: Build number of the SRU 1: Nightly ID - only important for Solaris developersTake a hypothetical example [email protected],5.11-0.175.1.5.0.4.1:<something> This would be build 4 of SRU 5 of Update 1 of Solaris 11 This is actually documented in a MOS article 1378134.1 Which you can read if you have a support contract.

    Read the article

  • Will HTML5 make Silverlight redundant?

    - by Laila
    One of the great features of Adobe AIR v2 that was launched this month was its support for some of the 2008 draft of HTML5. The HTML5 specification was started in 2004, but the full spec will probably not be approved by W3C until around 2022. One might have thought that it would take years yet from now to reach the point where any browsers were remotely HTML5-compliant, but enough of HTML5 is published and agreed to make a lot of it possible, and Safari and Adobe have got there thanks to Apple's open-source WebKit. The race for HTML 5 has been fuelled by the demand by Apple and Google for advanced graphics, typography, animations and transitions without having to rely on third party browser plug-ins such as Adobe Flash or Silverlight. There is good reason for this haste: Flash doesn't support touch-devices and has been slow in supporting hardware video decoders such as H.264. There is a strong requirement to do all that Flash can do in an open-standards way. Those with proprietary solutions remain sniffy. In AIR 2, Adobe pointedly disables the HTML5 and tags that allow basic playing of media content, saying that the specification is not final and there is still no standard for the supported formats, and adding that Safari implements a 'disjoint set' of codecs. Microsoft also has little interest in HTML 5 as it has so much invested in Silverlight. Google stands to gain by the Adobe AIR for Android as it will allow a lot of applications to be migrated easily to the platform, so sees Apple's war on Flash as a way of gaining market share. Why do we care? It is because HTML5/CSS3 provides facilities much far beyond HTML4, bring the reality of browser-based applications a lot closer. Probably most generally useful is the advanced typography: Safari and AIR already both support a way of reflowing text in a container across an arbitrary number of columns; Page-specific fonts can also be specified. Then there is 2D drawing, video, transitions, local storage, AJAX navigation and mutable DOM prototypes. HTML5 is likely to provide base functionality that is required but it is too early to be certain that it will render Flash, Silverlight or JavaFX obsolete. In the meantime, Adobe Air provides the best vehicle for developing HTML5/CSS3 applications without a twinge of worry about browser incompatibilities. Cheers, Laila

    Read the article

  • How to remove synaptic without installing all the unwanted packages?

    - by Jay
    I am trying to uninstall synaptic. I prefer using apt-get and other command line tools to manage my packages. So I do not need synaptic and the software manager. I'm trying to remove both of them using apt-get. Its a new box. Recently installed Linux Mint mate 15. After installation, the only thing I did was, sudo apt-get update and sudo apt-get dist-upgrade After that, I did this command for removing synaptic, sudo apt-get remove --purge synaptic But this gives me a very weird output, Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: apturl-kde icoutils kate-data katepart kde-runtime kde-runtime-data kdelibs-bin kdelibs5-data kdelibs5-plugins kdesudo kdoctools kubuntu-debug-installer libattica0.4 libdlrestrictions1 libkactivities-bin libkactivities-models1 libkactivities6 libkatepartinterfaces4 libkcmutils4 libkde3support4 libkdeclarative5 libkdecore5 libkdesu5 libkdeui5 libkdewebkit5 libkdnssd4 libkemoticons4 libkfile4 libkhtml5 libkidletime4 libkio5 libkjsapi4 libkjsembed4 libkmediaplayer4 libknewstuff3-4 libknotifyconfig4 libkntlm4 libkparts4 libkpty4 libkrosscore4 libktexteditor4 libkxmlrpcclient4 libnepomuk4 libnepomukcore4abi1 libnepomukquery4a libnepomukutils4 libntrack-qt4-1 libntrack0 libphonon4 libplasma3 libpolkit-qt-1-1 libpoppler-qt4-4 libqapt2 libqapt2-runtime libqca2 libqt4-qt3support libsolid4 libsoprano4 libstreamanalyzer0 libstreams0 libthreadweaver4 libvirtodbc0 nepomuk-core nepomuk-core-data ntrack-module-libnl-0 odbcinst odbcinst1debian2 oxygen-icon-theme phonon phonon-backend-gstreamer plasma-scriptengine-javascript qapt-batch shared-desktop-ontologies soprano-daemon virtuoso-minimal virtuoso-opensource-6.1-bin virtuoso-opensource-6.1-common Use 'apt-get autoremove' to remove them. The following extra packages will be installed: apturl-kde icoutils kate-data katepart kde-runtime kde-runtime-data kdelibs-bin kdelibs5-data kdelibs5-plugins kdesudo kdoctools kubuntu-debug-installer libattica0.4 libdlrestrictions1 libkactivities-bin libkactivities-models1 libkactivities6 libkatepartinterfaces4 libkcmutils4 libkde3support4 libkdeclarative5 libkdecore5 libkdesu5 libkdeui5 libkdewebkit5 libkdnssd4 libkemoticons4 libkfile4 libkhtml5 libkidletime4 libkio5 libkjsapi4 libkjsembed4 libkmediaplayer4 libknewstuff3-4 libknotifyconfig4 libkntlm4 libkparts4 libkpty4 libkrosscore4 libktexteditor4 libkxmlrpcclient4 libnepomuk4 libnepomukcore4abi1 libnepomukquery4a libnepomukutils4 libntrack-qt4-1 libntrack0 libphonon4 libplasma3 libpolkit-qt-1-1 libpoppler-qt4-4 libqapt2 libqapt2-runtime libqca2 libqt4-qt3support libsolid4 libsoprano4 libstreamanalyzer0 libstreams0 libthreadweaver4 libvirtodbc0 libxml2-utils nepomuk-core nepomuk-core-data ntrack-module-libnl-0 odbcinst odbcinst1debian2 oxygen-icon-theme phonon phonon-backend-gstreamer plasma-scriptengine-javascript qapt-batch shared-desktop-ontologies soprano-daemon virtuoso-minimal virtuoso-opensource-6.1-bin virtuoso-opensource-6.1-common Suggested packages: libterm-readline-gnu-perl libterm-readline-perl-perl djvulibre-bin finger hspell libqca2-plugin-cyrus-sasl libqca2-plugin-gnupg libqca2-plugin-ossl phonon-backend-vlc phonon-backend-xine phonon-backend-mplayer The following packages will be REMOVED: aptoncd* apturl* mintupdate* mintwelcome* synaptic* The following NEW packages will be installed: apturl-kde icoutils kate-data katepart kde-runtime kde-runtime-data kdelibs-bin kdelibs5-data kdelibs5-plugins kdesudo kdoctools kubuntu-debug-installer libattica0.4 libdlrestrictions1 libkactivities-bin libkactivities-models1 libkactivities6 libkatepartinterfaces4 libkcmutils4 libkde3support4 libkdeclarative5 libkdecore5 libkdesu5 libkdeui5 libkdewebkit5 libkdnssd4 libkemoticons4 libkfile4 libkhtml5 libkidletime4 libkio5 libkjsapi4 libkjsembed4 libkmediaplayer4 libknewstuff3-4 libknotifyconfig4 libkntlm4 libkparts4 libkpty4 libkrosscore4 libktexteditor4 libkxmlrpcclient4 libnepomuk4 libnepomukcore4abi1 libnepomukquery4a libnepomukutils4 libntrack-qt4-1 libntrack0 libphonon4 libplasma3 libpolkit-qt-1-1 libpoppler-qt4-4 libqapt2 libqapt2-runtime libqca2 libqt4-qt3support libsolid4 libsoprano4 libstreamanalyzer0 libstreams0 libthreadweaver4 libvirtodbc0 libxml2-utils nepomuk-core nepomuk-core-data ntrack-module-libnl-0 odbcinst odbcinst1debian2 oxygen-icon-theme phonon phonon-backend-gstreamer plasma-scriptengine-javascript qapt-batch shared-desktop-ontologies soprano-daemon virtuoso-minimal virtuoso-opensource-6.1-bin virtuoso-opensource-6.1-common 0 upgraded, 78 newly installed, 5 to remove and 0 not upgraded. Need to get 60.9 MB of archives. After this operation, 146 MB of additional disk space will be used. Do you want to continue [Y/n]? n Abort. As you can see, apt-get is trying to install the same packages that it is asking me to autoremove. Could someone please tell me, how to uninstall synaptic properly? Or am I missing something? Just for the record, I also did, sudo apt-get autoremove --purge like it asked me to ... and this is what I got, Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 0 to remove and 6 not upgraded.

    Read the article

  • DATEFROMPARTS

    - by jamiet
    I recently overheard a remark by Greg Low in which he said something akin to "the most interesting parts of a new SQL Server release are the myriad of small things that are in there that make a developer's life easier" (I'm paraphrasing because I can't remember the actual quote but it was something like that). The new DATEFROMPARTS function is a classic example of that . It simply takes three integer parameters and builds a date out of them (if you have used DateSerial in Reporting Services then you'll understand). Take the following code which generates the first and last day of some given years: SELECT 2008 AS Yr INTO #Years UNION ALL SELECT 2009 UNION ALL SELECT 2010 UNION ALL SELECT 2011 UNION ALL SELECT 2012SELECT [FirstDayOfYear] = CONVERT(DATE,CONVERT(CHAR(8),((y.[Yr] * 10000) + 101))),      [LastDayOfYear] = CONVERT(DATE,CONVERT(CHAR(8),((y.[Yr] * 10000) + 1231)))FROM   #Years y here are the results: That code is pretty gnarly though with those CONVERTs in there and, worse, if the character string is constructed in a certain way then it could fail due to localisation, check this out: SET LANGUAGE french;SELECT dt,Month_Name=DATENAME(mm,dt)FROM   (       SELECT  dt = CONVERT(DATETIME,CONVERT(CHAR(4),y.[Yr]) + N'-01-02')       FROM    #Years y       )d;SET LANGUAGE us_english;SELECT dt,Month_Name=DATENAME(mm,dt)FROM   (       SELECT  dt = CONVERT(DATETIME,CONVERT(CHAR(4),y.[Yr]) + N'-01-02')       FROM    #Years y       )d; Notice how the datetime has been converted differently based on the language setting. When French, the string "2012-01-02" gets interpreted as 1st February whereas when us_english the same string is interpreted as 2nd January. Instead of all this CONVERTing nastiness we have DATEFROMPARTS: SELECT [FirstDayOfYear] = DATEFROMPARTS(y.[Yr],1,1),    [LasttDayOfYear] = DATEFROMPARTS(y.[Yr],12,31)FROM   #Years y How much nicer is that? The bad news of course is that you have to upgrade to SQL Server 2012 or migrate to SQL Azure if you want to use it, as is the way of the world! Don't forget that if you want to try this code out on SQL Azure right this second, for free, you can do so by connecting up to AdventureWorks On Azure. You don't even need to have SSMS handy - a browser that runs Silverlight will do just fine. Simply head to https://mhknbn2kdz.database.windows.net/ and use the following credentials: Database AdventureWorks2012 User sqlfamily Password sqlf@m1ly One caveat, SELECT INTO doesn't work on SQL Azure so you'll have to use this instead: DECLARE @y TABLE ( [Yr] INT);INSERT @y([Yr])SELECT 2008 AS Yr UNION ALL SELECT 2009 UNION ALL SELECT 2010 UNION ALL SELECT 2011 UNION ALL SELECT 2012;SELECT [FirstDayOfYear] = DATEFROMPARTS(y.[Yr],1,1),      [LastDayOfYear] = DATEFROMPARTS(y.[Yr],12,31)FROM @y y;SELECT [FirstDayOfYear] = CONVERT(DATE,CONVERT(CHAR(8),((y.[Yr] * 10000) + 101))),      [LastDayOfYear] = CONVERT(DATE,CONVERT(CHAR(8),((y.[Yr] * 10000) + 1231)))FROM @y y; @Jamiet

    Read the article

  • Do I need to create my own or use a commercial server for the features and matchmaking options I want my game to support?

    - by baptzmoffire
    So I'm developing an indie turn-based game for iOS and, in coding up a Game Center matchmaking class, I'm starting to question whether Game Center is even the best choice for what I want this game to do. I need to figure out whether I need to create my own server, invest in a preexisting client or server service, or if I even need to use a server at all. If I do need to use a ready-made service other than Game Center, which server would accomodate my game's needs best? I have limited resources and funds. Here is the list of features I want my game to support, ideally: Turn-based gameplay (a la "with Friends" and "with Buddies" games) Smart matchmaking (matching users up with other players of comparable skill/achievements) Random matchmaking Facebook matchmaking Specific username matchmaking Contact list matchmaking A way to select what "type" of match you want to challenge an opponent to. (In random, smart, and Facebook matchmaking, there will be different "wagers" the player can make. [e.g. "I wanna play a random opponent for 1000 points. Now, I wanna play my Facebook buddy for 1,000,000 points."] There will be a predetermined range of amounts you can play for. It won't be customizable.) Buddies list capability (Game-buddies, as opposed to contacts and Facebook) A higher concurrent game cap than Game Center offers (which I still can't really find a straight answer on) Scalability (it should support 2 or 20,000,000 players) Objective-C compatibility Flexibility (for all the stuff I haven't thought of yet) Am I dreaming, here? Is there even a service that can handle all of these features? Do I need to invest months in learning a networking language to build my own? If so, how much would I need to spend on hardware? I've been looking around all morning and, so far, the only seemingly viable option is SmartFox. Under "Everything and the kitchen sink" section here, it says they support "virtual world with Zones, Rooms and RoomGroups, create complex game challenges, send invitations, manage buddy lists, create custom permission profiles, oversee the security aspects and tons more." http://www.smartfoxserver.com/overview/platform Is there an option that Im just overlooking? Thanks for any help anyone can provide. Sorry for the long poast. One last question: Does anyone know which server Dice with Buddies uses? I was experimenting with how many concurrent games I could get going and my ADHD kicked in at about 80 games. 80 concurrent games would be great for my game, but again, I need the other features I mentioned too. Thanks again.

    Read the article

  • NVIDIA 550M Drivers

    - by DOOM
    First to say, I am newbie, to the linux world and in situation where i have to get used to using ubuntu. My system is: i7-2630QM 8GB Ram with 750GB HD + NVIDIa 550M (1GB) Since i was facing problems with wubi - "slow Ubuntu", i installed it on a separate partition, of 80GB (10GB Swap, 40GB HOME, 30GB ROOT). The system was running fine, before I started using some "CFD" (Graphics Dependent) application. I needed to use "paraview" a graphics software, to design some engineering stuff. Following the installation problems, i installed something called "messa" on my system. The software works but, now my system is "dead-slow". Even with the computer at an idle state, the laptop, is pretty slow, and with huge annoying fan noise. I was tried running some similar applications with windows, and it turns out that its not a hardware, but has to do with the GPU drivers. Following some forums, I installed the "nvidia-current" and now everything is the same. I know, there are many solutions on this forum for nvidia-driver updates, but as you see, nothings working my way. Please someone, tell me what is that I am doing wrong :( This is the output from my terminal for the command lspci | grep 'intel' 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5) 00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5) 00:1d.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM67 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 03:00.0 Network controller: Intel Corporation Centrino Wireless-N 1030 (rev 34)

    Read the article

< Previous Page | 412 413 414 415 416 417 418 419 420 421 422 423  | Next Page >