Search Results

Search found 20043 results on 802 pages for 'password assistant mac'.

Page 416/802 | < Previous Page | 412 413 414 415 416 417 418 419 420 421 422 423  | Next Page >

• Virtual bridged networking with VLAN, could not ping

  - by v.yegy

  I require a virtual network with VLAN be build between two virtual hosts - which can be (lxc/ vbox -ubuntu or win xp). I tried with lxc and vbox with Ubuntu and was finding difficult to make it work without vlan, but was successful with vbox with xp. vbox-xp1 --- br1 ---------------- br2 ---- vbox-xp2 The config is: brctl addbr br1; brctl addbr br2 ifconfig br1 up; ifconfig br2 up stp br1 off; stp br2 off ip link add name br1-br2-l0 type veth peer name br1-br2-l1 sudo brctl addif br1 br1-br2-l0 sudo brctl addif br2 br1-br2-l1 vbox - xp 1 and 2 with network ; bridged and br1 and br2 respectively. The adapter is intel PRO/1000 MT Server and driver installed in guests. Configured IPs and two hosts pinged! VLAN config: ip link add link br1 name br1-2.5 type vlan id 5 brctl addif br2 br1-2.5 create vlan 5 in xp 1 and 2 and assign ip address Ping on with this config does not work. Wireshark trace on interface br1-br2-l1 / br1-2.5 shows that one ping results in ~240 ping packets and each growing by 4 bytes - first one being correct and 60, ping does not reach other host as I see mac is not learnt[arp -a]. -- if br1-2.5 is not configured, I see untagged packets in br1-br2-l1/0, but still not reaching other host as mac is not learnt. if br1-br2-l0/1 is made down, even if br1-2.5 is up, I count not see any packets. I tried with ebtables, but still could not make a correct config to work. -- If any one here are aware of any configuration, please let me know. I need to make a network of switches. Seems I have a very long way. Sorry for a very long question. Thanks and regards, vy

  Read the article

• jboss 5.1 mysql connection pooling

  - by boyd4715

  I am using JBOSS 5.1.0.GA, MySQL 5.5 and Hibernate 3.3.1 GA (included with JBOSS) + Spring. My question is do I need to add c3p0 as a data source in my spring/hibernate configuration for connection pooling or are the setting in the JBOSS mysql-ds.xml setting enough. My mysql-ds.xml is the following: <datasources> <local-tx-datasource> <jndi-name>MySqlDS</jndi-name> <connection-url>jdbc:mysql://localhost:3306/ecotrak</connection-url> <driver-class>com.mysql.jdbc.Driver</driver-class> <user-name>ecotrak</user-name> <password>ecotrak</password> <min-pool-size>5</min-pool-size> <max-pool-size>20</max-pool-size> <idle-timeout-minutes>5</idle-timeout-minutes> <exception-sorter-class-name>org.jboss.resource.adapter.jdbc.vendor.MySQLExceptionSorter</exception-sorter-class-name> <!-- should only be used on drivers after 3.22.1 with "ping" support --> <valid-connection-checker-class-name>org.jboss.resource.adapter.jdbc.vendor.MySQLValidConnectionChecker</valid-connection-checker-class-name> <!-- sql to call when connection is created <new-connection-sql>some arbitrary sql</new-connection-sql> --> <!-- sql to call on an existing pooled connection when it is obtained from pool - MySQLValidConnectionChecker is preferred for newer drivers <check-valid-connection-sql>some arbitrary sql</check-valid-connection-sql> --> <!-- corresponding type-mapping in the standardjbosscmp-jdbc.xml (optional) --> <metadata> <type-mapping>mySQL</type-mapping> </metadata> </local-tx-datasource> </datasources>

  Read the article

• Using multiple computers effectively

  - by Benjamin Oakes

  I have some extra (old) Macs and PCs around the house and a MacBook that's sometimes overworked. I'm looking for tips on using multiple computers effectively. Basically, I'd like to add to the following list. Here's what I'm using so far: Teleport: lets you use a single mouse and keyboard to control several Macs, like Synergy Built-in file sharing: lets me run programs on another Mac, but only maintain one copy of the data Bazaar: distributed version control Mail.app, Thunderbird, etc.: IMAP for my mail accounts TuneConnect: control iTunes on another Mac with a nice interface, using the library on my MacBook (if I choose it by pressing option at startup) over file sharing OmniFocus: syncs across computers pretty seamlessly Web browsing across computers VNC/Remote Desktop Running X-windows programs using ssh -Y hostname for headless operation (but they die when I sleep the connecting computer -- something like GNU screen would be ideal) Plain-old ssh with GNU screen Really, a better idea of what I do might be necessary. Generally though, I'd like to distribute tasks across more than one computer when possible, but not have much overhead in doing so. The perfect solution? An Xgrid-like program that pushes processing across multiple computers automatically and seamlessly (although that seems unlikely). Here's what I have, in case it makes a difference: MacBook (Dual 2.16 GHz, OS X 10.6.3) eMac (1.25 GHz, OS X 10.4.11, soon to be 10.5) Dell Dimension (800 MHz, some version of Ubuntu) -- no dedicated monitor PowerMac G3 (400 MHz, OS X 10.4.11) -- no dedicated monitor iMac G3 DV (400 MHz, OS X 10.4.11) -- currently in the kitchen for recipes, email, web browsing, music, movies (DVDs), etc. (Total, they cost me around $650, mostly for the MacBook. Freecycle is wonderful, just in case you haven't heard of it.) I'm really only using the MacBook and eMac at this point, but I'd like to push more onto it and possibly the PowerMac and Dell.

  Read the article

• syslog-ng and nging logs to mysql

  - by Katafalkas

  So couple of days ago I asked how to log php and nginx logs to centralized MySQL database, and m0ntassar gave a perfect answer :) cheer ! The problem I am facing now is that I can not seem to get it working. syslog-ng version: # syslog-ng --version syslog-ng 3.2.5 This is my nginx log format: log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; syslog-ng source: source nginx { file( "/var/log/nginx/tg-test-3.access.log" follow_freq(1) flags(no-parse) ); }; syslog-ng destination: destination d_sql { sql(type(mysql) host("127.0.0.1") username("syslog") password("superpasswd") database("syslog") table("nginx") columns("remote_addr","remote_user","time_local","request","status","body_bytes_sent","http_ referer","http_user_agent","http_x_forwarded_for") values("$REMOTE_ADDR", "$REMOTE_USER", "$TIME_LOCAL", "$REQUEST", "$STATUS","$BODY_BYTES_SENT", "$HTTP_REFERER", "$HTTP_USER_AGENT", "$HTTP_X_FORWARDED_FOR")); }; MySQL table for testing purposes: CREATE TABLE `nginx` ( `remote_addr` varchar(100) DEFAULT NULL, `remote_user` varchar(100) DEFAULT NULL, `time` varchar(100) DEFAULT NULL, `request` varchar(100) DEFAULT NULL, `status` varchar(100) DEFAULT NULL, `body_bytes_sent` varchar(100) DEFAULT NULL, `http_referer` varchar(100) DEFAULT NULL, `http_user_agent` varchar(100) DEFAULT NULL, `http_x_forwarded_for` varchar(100) DEFAULT NULL, `time_local` text, `datetime` text, `host` text, `program` text, `pid` text, `message` text ) ENGINE=InnoDB DEFAULT CHARSET=latin1 Now first thing that goes wrong is when I restart syslog-ng: # /etc/init.d/syslog-ng restart Stopping syslog-ng: [ OK ] Starting syslog-ng: WARNING: You are using the default values for columns(), indexes() or values(), please specify these explicitly as the default will be dropped in the future; [ OK ] I have tried creating a file destination and it all works fine, and then I have tried replacing my destination with: destination d_sql { sql(type(mysql) host("127.0.0.1") username("syslog") password("kosmodromas") database("syslog") table("nginx") columns("datetime", "host", "program", "pid", "message") values("$R_DATE", "$HOST", "$PROGRAM", "$PID", "$MSGONLY") indexes("datetime", "host", "program", "pid", "message")); }; Which did work and it was writing stuff to mysql, The problem is that I want to write stuff to in exact format as nginx log format is. I assume that I am missing something really simple or I need to do some parsing between source and destination. Any help will be much appreciated :)

  Read the article

• Can't Login to phpPgAdmin

  - by Devin

  I'm trying to set up phpPgAdmin on my test machine so that I can interface with PostgreSQL without always having to use the psql CLI. I have PostgreSQL 9.1 installed via the RPM repository, while I installed phpPgAdmin 5.0.4 "manually" (by extracting the archive from the phpPgAdmin website). For the record, my host OS is CentOS 6.2. I made the following configuration changes already: PostgreSQL Inside pg_hba.conf, I changed all METHODs to md5. I gave the postgres account a password I added a new account named webuser with a password (note that I did not do anything else to the account, so I can't exactly say that I know what permissions it has and all) phpPgAdmin config.inc.php Changed the line $conf['servers'][0]['host'] = ''; to $conf['servers'][0]['host'] = '127.0.0.1'; (I've also tried using localhost as the value there). Set $conf['extra_login_security'] to false. Whenever I try to log in to phpPgAdmin, I get "Login failed", even if I use successful credentials (ones that work in psql). I've tried to go through some of the steps noted in Question 3 in the FAQ, but it hasn't worked out well so far there. It likely does not help that this is my first day working with PostgreSQL. I'm farily familiar with MySQL, but I have to use PostgreSQL for the project I'm working on. Could anyone offer some help for how to set up phpPgAdmin on CentOS 6.2? If I've done something terribly wrong in my configuration so far, it's no big deal to blow something/everything away, as it's not like I've stored any data there yet! I appreciate any insight you may have!

  Read the article

• Active Directory LDAP and user issues (using apache2 for svn access)

  - by CaCl

  I currently have a setup where I work that lets users use their active directory domain logins and passwords to authenticate and authorize access to Subversion. Currently I need to allow application accounts the same access. So our IT group creates application accounts in the active directory for us to use. But they want to be "secure" so they set the "Workstations Allowed" to be only a limited number of workstations. So when an application account hits the apache2 server for authentication they can't login for some reason and I'm having a heck of a time trying to debug. The error logs only show me: [Tue Apr 06 11:24:25 2010] [warn] [client 24.24.24.24] [3469] auth_ldap authenticate: user appuser13 authentication failed; URI /svn [ldap_simple_bind_s() to check user credentials failed][Invalid credentials] [Tue Apr 06 11:24:25 2010] [error] [client 24.24.24.24] user appuser13: authentication failure for "/svn": Password Mismatch I've checked the password numerous times and it appears to be correct but I can't seem to get the user to authenticate properly. Below is a snippet of the apache configuration for ldap: # Auth providers # Active Directory <AuthnProviderAlias ldap ldap1> AuthBasicProvider ldap AuthLDAPURL "ldap://dmain.company.com:389/dc=dmain,dc=company,dc=com?sAMAccountName?sub?(objectClass=*)" AuthLDAPBindDN "CN=svnuser13,OU=Application Accounts,dc=dmain,dc=teradata,dc=com" AuthLDAPBindPassword secret3 </AuthnProviderAlias> # Another set of users from a different group <AuthnProviderAlias ldap ldap2> AuthBasicProvider ldap AuthLDAPURL ldap://diffldapserver:389/dc=specialusers,dc=com?uid </AuthnProviderAlias> # Another set of users from a different group <AuthnProviderAlias file file1> AuthUserFile /var/svn/auth/htpasswd </AuthnProviderAlias> <Location /svn> DAV svn SVNPath /var/svn Satisfy Any Require valid-user AuthType Basic AuthName "SVN Repository" AuthBasicProvider ldap1 file1 ldap2 AuthzSVNAccessFile /var/svn/auth/access AuthzLDAPAuthoritative on Require valid-user </Location> Any help, like tips for debugging is appreciated!

  Read the article

• How can I "share" a network share over the internet to multiple operating systems?

  - by Minsc

  Hello all, We have a network share accessible through our intranet that is widely used. This share has it's own set of fine tuned permissions. I have been tasked with allowing A.D. authenticated access to this share over the internet without the use of VPN. The internet access has to mimic the NTSF permissions in place on the share. Another piece of the puzzle is that the access over the internet has to allow perusal of the share from Windows and Mac OS systems. I had envisioned a web front end that would facilitate downloading to and uploading from the share via a web browser. I'm trying to ask for some suggestions about what type of setup is necessary to achieve this. I've done loads of testing and searching for solutions but I can't seem to get anything to work as I hope. The web server that will be handing all of this is a Windows 2K8 box with IIS 7. How can I allow the users to authenticate against Active Directory when coming from the internet even when coming from a Mac system? I hope my question is not too broad, I'm sorry if I should have broken it up into multiple questions. It all is just tied together in my head. Thank you all for your time and aid.

  Read the article

• Postfix SASL Authentication using PAM_Python

  - by Christian Joudrey

  Cross-post from: http://stackoverflow.com/questions/4337995/postfix-sasl-authentication-using-pam-python Hey guys, I just set up a Postfix server in Ubuntu and I want to add SASL authentication using PAM_Python. I've compiled pam_python.so and made sure that it is in /lib/security. I've also added created the /etc/pam.d/smtp file and added: auth required pam_python.so test.py The test.py file has been placed in /lib/security and contains: # # Duplicates pam_permit.c # DEFAULT_USER = "nobody" def pam_sm_authenticate(pamh, flags, argv): try: user = pamh.get_user(None) except pamh.exception, e: return e.pam_result if user == None: pam.user = DEFAULT_USER return pamh.PAM_SUCCESS def pam_sm_setcred(pamh, flags, argv): return pamh.PAM_SUCCESS def pam_sm_acct_mgmt(pamh, flags, argv): return pamh.PAM_SUCCESS def pam_sm_open_session(pamh, flags, argv): return pamh.PAM_SUCCESS def pam_sm_close_session(pamh, flags, argv): return pamh.PAM_SUCCESS def pam_sm_chauthtok(pamh, flags, argv): return pamh.PAM_SUCCESS When I test the authentication using auth plain amltbXkAamltbXkAcmVhbC1zZWNyZXQ= I get the following response: 535 5.7.8 Error: authentication failed: no mechanism available In the postfix logs I have this: Dec 2 00:37:19 duo postfix/smtpd[16487]: warning: SASL authentication problem: unknown password verifier Dec 2 00:37:19 duo postfix/smtpd[16487]: warning: SASL authentication failure: Password verification failed Dec 2 00:37:19 duo postfix/smtpd[16487]: warning: localhost.localdomain[127.0.0.1]: SASL plain authentication failed: no mechanism available Any ideas? tl;dr Anyone have step by step instructions on how to set up PAM_Python with Postfix? Christian

  Read the article

• MacPorts pHash not showing up in Python

  - by Nitzan Wilnai

  I am having a problem where python does not show pHash installed even though I installed it using macports. I made sure I am using the MacPorts version of Python by doing: sudo port select --set python python27 I then installed pHash by doing: sudo port install pHash. It installed without any errors. When I call help('modules'), I do not see pHash listed among the installed packages. Any ideas on why python is not seeing the pHash install by MacPorts? Calling port select --list python shows the following: Available versions for python: none python25-apple python26-apple python27 (active) python27-apple Printing out sys.path outputs the following: (reformatted to make it easier to read here) ['/Library/Python/2.7/site-packages/boto-2.9.9-py2.7.egg', '/Library/Python/2.7/site-packages/setuptools-0.9.8-py2.7.egg', '/Library/Python/2.7/site-packages/pip-1.4.1-py2.7.egg', '/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/python27.zip', '/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7', '/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/plat-darwin', '/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/plat-mac', '/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/plat-mac/lib-scriptpackages', '/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/lib-tk', '/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/lib-old', '/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/lib-dynload', '/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/site-packages', '/Library/Python/2.7/site-packages'] Can anyone help? Thanks.

  Read the article

• Segmentation fault on login to mysql

  - by numberwhun

  Hello everyone! I recently did a fresh install of Ubuntu on my laptop (HP dv7, AMD Dual Core with 4 gigs RAM). I am working on installing my development environment and tools and one of the first things I was working on is getting MySQL installed. The following was my configure statement with options: ./configure --prefix=/usr/local/mysql --with-big-tables --with-unix-socket-path=/usr/local/mysql/tmp/mysql.sock --with-named-curses-libs=/lib/libncurses.so.5.7 After I did the make;make install, I did the post configuration such as setting the root password and installing the mysqld daemon in its rightful place. My issue is when I try to log in to mysql to start using it, the following shows what happens: $ mysql -u root -p Enter password: Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 1 Server version: 5.1.42 Source distribution Segmentation fault I have searched Google extensively, I have searched through the mysql bugs database and I have yet to find anything that matches my issue. Here is the contents of my my.cnf file, in case you want to see it: $ cat /etc/my.cnf [mysqld] basedir=/usr/local/mysql datadir=/usr/local/mysql socket=/usr/local/mysql/tmp/mysql.sock [mysql.server] user=mysql #basedir=/var/lib [client] socket=/usr/local/mysql/tmp/mysql.sock [mysqld_safe] err-log=/usr/local/mysql/logs/mysqld.log pid-file=/var/run/mysqld/mysqld.pid I am really hoping that someone here can tell me what has gone wrong with my installation as I would really love to know. I welcome and look forward to all responses. Thank you in advance! Best regards, Jeff

  Read the article

• Cisco ASA: How to route PPPoE-assigned subnet?

  - by Martijn Heemels

  We've just received a fiber uplink, and I'm trying to configure our Cisco ASA 5505 to properly use it. The provider requires us to connect via PPPoE, and I managed to configure the ASA as a PPPoE client and establish a connection. The ASA is assigned an IP address by PPPoE, and I can ping out from the ASA to the internet, but I should have access to an entire /28 subnet. I can't figure out how to get that subnet configured on the ASA, so that I can route or NAT the available public addresses to various internal hosts. My assigned range is: 188.xx.xx.176/28 The address I get via PPPoE is 188.xx.xx.177/32, which according to our provider is our Default Gateway address. They claim the subnet is correctly routed to us on their side. How does the ASA know which range it is responsible for on the Fiber interface? How do I use the addresses from my range? To clarify my config; The ASA is currently configured to default-route to our ADSL uplink on port Ethernet0/0 (interface vlan2, nicknamed Outside). The fiber is connected to port Ethernet0/2 (interface vlan50, nicknamed Fiber) so I can configure and test it before making it the default route. Once I'm clear on how to set it all up, I'll fully replace the Outside interface with Fiber. My config (rather long): : Saved : ASA Version 8.3(2)4 ! hostname gw domain-name example.com enable password ****** encrypted passwd ****** encrypted names name 10.10.1.0 Inside-dhcp-network description Desktops and clients that receive their IP via DHCP name 10.10.0.208 svn.example.com description Subversion server name 10.10.0.205 marvin.example.com description LAMP development server name 10.10.0.206 dns.example.com description DNS, DHCP, NTP ! interface Vlan2 description Old ADSL WAN connection nameif outside security-level 0 ip address 192.168.1.2 255.255.255.252 ! interface Vlan10 description LAN vlan 10 Regular LAN traffic nameif inside security-level 100 ip address 10.10.0.254 255.255.0.0 ! interface Vlan11 description LAN vlan 11 Lab/test traffic nameif lab security-level 90 ip address 10.11.0.254 255.255.0.0 ! interface Vlan20 description LAN vlan 20 ISCSI traffic nameif iscsi security-level 100 ip address 10.20.0.254 255.255.0.0 ! interface Vlan30 description LAN vlan 30 DMZ traffic nameif dmz security-level 50 ip address 10.30.0.254 255.255.0.0 ! interface Vlan40 description LAN vlan 40 Guests access to the internet nameif guests security-level 50 ip address 10.40.0.254 255.255.0.0 ! interface Vlan50 description New WAN Corporate Internet over fiber nameif fiber security-level 0 pppoe client vpdn group KPN ip address pppoe ! interface Ethernet0/0 switchport access vlan 2 speed 100 duplex full ! interface Ethernet0/1 switchport trunk allowed vlan 10,11,30,40 switchport trunk native vlan 10 switchport mode trunk ! interface Ethernet0/2 switchport access vlan 50 speed 100 duplex full ! interface Ethernet0/3 shutdown ! interface Ethernet0/4 shutdown ! interface Ethernet0/5 switchport access vlan 20 ! interface Ethernet0/6 shutdown ! interface Ethernet0/7 shutdown ! boot system disk0:/asa832-4-k8.bin ftp mode passive clock timezone CEST 1 clock summer-time CEDT recurring last Sun Mar 2:00 last Sun Oct 3:00 dns domain-lookup inside dns server-group DefaultDNS name-server dns.example.com domain-name example.com same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network inside-net subnet 10.10.0.0 255.255.0.0 object network svn.example.com host 10.10.0.208 object network marvin.example.com host 10.10.0.205 object network lab-net subnet 10.11.0.0 255.255.0.0 object network dmz-net subnet 10.30.0.0 255.255.0.0 object network guests-net subnet 10.40.0.0 255.255.0.0 object network dhcp-subnet subnet 10.10.1.0 255.255.255.0 description DHCP assigned addresses on Vlan 10 object network Inside-vpnpool description Pool of assignable addresses for VPN clients object network vpn-subnet subnet 10.10.3.0 255.255.255.0 description Address pool assignable to VPN clients object network dns.example.com host 10.10.0.206 description DNS, DHCP, NTP object-group service iscsi tcp description iscsi storage traffic port-object eq 3260 access-list outside_access_in remark Allow access from outside to HTTP on svn. access-list outside_access_in extended permit tcp any object svn.example.com eq www access-list Insiders!_splitTunnelAcl standard permit 10.10.0.0 255.255.0.0 access-list iscsi_access_in remark Prevent disruption of iscsi traffic from outside the iscsi vlan. access-list iscsi_access_in extended deny tcp any interface iscsi object-group iscsi log warnings ! snmp-map DenyV1 deny version 1 ! pager lines 24 logging enable logging timestamp logging asdm-buffer-size 512 logging monitor warnings logging buffered warnings logging history critical logging asdm errors logging flash-bufferwrap logging flash-minimum-free 4000 logging flash-maximum-allocation 2000 mtu outside 1500 mtu inside 1500 mtu lab 1500 mtu iscsi 9000 mtu dmz 1500 mtu guests 1500 mtu fiber 1492 ip local pool DHCP_VPN 10.10.3.1-10.10.3.20 mask 255.255.0.0 ip verify reverse-path interface outside no failover icmp unreachable rate-limit 10 burst-size 5 asdm image disk0:/asdm-635.bin asdm history enable arp timeout 14400 nat (inside,outside) source static any any destination static vpn-subnet vpn-subnet ! object network inside-net nat (inside,outside) dynamic interface object network svn.example.com nat (inside,outside) static interface service tcp www www object network lab-net nat (lab,outside) dynamic interface object network dmz-net nat (dmz,outside) dynamic interface object network guests-net nat (guests,outside) dynamic interface access-group outside_access_in in interface outside access-group iscsi_access_in in interface iscsi route outside 0.0.0.0 0.0.0.0 192.168.1.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa-server SBS2003 protocol radius aaa-server SBS2003 (inside) host 10.10.0.204 timeout 5 key ***** aaa authentication enable console SBS2003 LOCAL aaa authentication ssh console SBS2003 LOCAL aaa authentication telnet console SBS2003 LOCAL http server enable http 10.10.0.0 255.255.0.0 inside snmp-server host inside 10.10.0.207 community ***** version 2c snmp-server location Server room snmp-server contact [email protected] snmp-server community ***** snmp-server enable traps snmp authentication linkup linkdown coldstart snmp-server enable traps syslog crypto ipsec transform-set TRANS_ESP_AES-256_SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set TRANS_ESP_AES-256_SHA mode transport crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs group5 crypto dynamic-map outside_dyn_map 20 set transform-set TRANS_ESP_AES-256_SHA crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 1 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 telnet 10.10.0.0 255.255.0.0 inside telnet timeout 5 ssh scopy enable ssh 10.10.0.0 255.255.0.0 inside ssh timeout 5 ssh version 2 console timeout 30 management-access inside vpdn group KPN request dialout pppoe vpdn group KPN localname INSIDERS vpdn group KPN ppp authentication pap vpdn username INSIDERS password ***** store-local dhcpd address 10.40.1.0-10.40.1.100 guests dhcpd dns 8.8.8.8 8.8.4.4 interface guests dhcpd update dns interface guests dhcpd enable guests ! threat-detection basic-threat threat-detection scanning-threat threat-detection statistics host number-of-rate 2 threat-detection statistics port number-of-rate 3 threat-detection statistics protocol number-of-rate 3 threat-detection statistics access-list threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200 ntp server dns.example.com source inside prefer webvpn group-policy DfltGrpPolicy attributes vpn-tunnel-protocol IPSec l2tp-ipsec group-policy Insiders! internal group-policy Insiders! attributes wins-server value 10.10.0.205 dns-server value 10.10.0.206 vpn-tunnel-protocol IPSec l2tp-ipsec split-tunnel-policy tunnelspecified split-tunnel-network-list value Insiders!_splitTunnelAcl default-domain value example.com username martijn password ****** encrypted privilege 15 username marcel password ****** encrypted privilege 15 tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key ***** tunnel-group Insiders! type remote-access tunnel-group Insiders! general-attributes address-pool DHCP_VPN authentication-server-group SBS2003 LOCAL default-group-policy Insiders! tunnel-group Insiders! ipsec-attributes pre-shared-key ***** ! class-map global-class match default-inspection-traffic class-map type inspect http match-all asdm_medium_security_methods match not request method head match not request method post match not request method get ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map type inspect http http_inspection_policy parameters protocol-violation action drop-connection policy-map global-policy class global-class inspect dns inspect esmtp inspect ftp inspect h323 h225 inspect h323 ras inspect http inspect icmp inspect icmp error inspect mgcp inspect netbios inspect pptp inspect rtsp inspect snmp DenyV1 ! service-policy global-policy global smtp-server 123.123.123.123 prompt hostname context call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email [email protected] destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily hpm topN enable Cryptochecksum:a76bbcf8b19019771c6d3eeecb95c1ca : end asdm image disk0:/asdm-635.bin asdm location svn.example.com 255.255.255.255 inside asdm location marvin.example.com 255.255.255.255 inside asdm location dns.example.com 255.255.255.255 inside asdm history enable

  Read the article

• Apple video adapters: Mini-DVI to DVI + DVI to video?

  - by Ken

  I have: a Macbook (which has Mini-DVI output) an Apple Mini-DVI to DVI adapter (so I can hook up my Macbook to my DVI LCD) a Mac mini (which has DVI output) I see that I can get a DVI-to-Video (s-video and composite) adapter from Apple that will let me hook up my Mac mini to my TV set (which has only component, s-video, and composite -- nothing digital). So far so good. Question: Will that same adapter also let me hook my Macbook to my TV? That is, can I hook Macbook - Mini-DVI to DVI - DVI to video - TV set, and see picture? I know there are digital/analog/integrated variants of DVI, and it's not at all clear to me what pins these things have and what signals they're sending. One website I found suggested that it would work, and another suggested that it wouldn't even physically connect. So I'm looking for, ideally, someone who's actually tried it, or has these adapters sitting around to try. I know I can buy 2 adapters (Mini-DVI to Video, and DVI to Video) to do this, but at $20 a pop I'll avoid that if at all possible.

  Read the article

• How to prevent nginx from locking files on mounted samba partition in Centos 6

  - by Bruce Kirkpatrick

  I'm using nginx 1.3.8 inside a centos 6.3 virtualbox 4.2.4 virtual machine. The system is running the latest software available via yum update. The host OS is windows 7. The site files nginx is serving are on mounted samba partition, which is a folder on the host Windows system. I.e., inside linux, nginx paths are referring to /home/vhosts and this is mounted from D:\vhosts\ on windows. The samba partition is mounted as root with 777 privileges. /etc/fstab looks like this, but with real ip, username, password: //hostip/vhosts /home/vhosts cifs username=username,password=SECRETPASSWORD,uid=root,gid=root,file_mode=0777,dir_mode=0777,rw,_netdev 0 0 I.e. linux/nginx reads from the windows share, and not the opposite. in /etc/samba/smb.conf, I have tried to disable all samba locking features, but it seems to have no effect even after rebooting the virtual machine. locking=no share modes=no oplocks = no level2 oplocks = no kernel oplocks =no I'm receiving "Access is denied" errors in Windows or linux when attempting to overwrite the javascript file in windows that has been accessed at least once with nginx. If I run "service nginx reload", the lock is removed and I'm able to save the file. That's why I think it is nginx causing the lock. The same problem occurs with directories. However, that may be a different issue not related to the use of samba. I'm using samba so that I can manage the source code outside of the virtual machine. Also note that after I run "service nginx reload", the file I'm editing is actually automatically deleted from the windows host. SOLVED: I just reviewed my nginx.conf file. It appears the "open_file_cache" feature is what is causing the lock and deleted files. When I set this option to open_file_cache off;, My problem is resolved. I will repost as the answer when it allows me to do so.

  Read the article

• Installing MySQL 5.1 on OS X 10.7 Lion

  - by xisal

  I am trying to install MySQL 5.1. I am on Lion, and when I remove all files associated with MySQL on my machine it still tells me that I have a newer version installed when I try to install it from the DMG file. Has anyone successfully installed MySQL 5.1 on Lion? I found a solution using Homebrew: Completely remove MySQL from your system (just in case) sudo rm /usr/local/mysql sudo rm -rf /usr/local/mysql* sudo rm -rf /Library/StartupItems/MySQLCOM sudo rm -rf /Library/PreferencePanes/My* vim /etc/hostconfig and removed the line MYSQLCOM=-YES- rm -rf ~/Library/PreferencePanes/My* sudo rm -rf /Library/Receipts/mysql* sudo rm -rf /Library/Receipts/MySQL* sudo rm -rf /var/db/receipts/com.mysql.* Source:http://stackoverflow.com/questions/1436425/how-do-you-uninstall-mysql-from-mac-os-x Install homebrew /usr/bin/ruby -e "$(curl -fsSL https://raw.github.com/gist/323731)" Source: https://github.com/mxcl/homebrew/wiki/installation Install MySQL 5.1 via brew brew install mysql51 if that doesn't work, do this: brew install https://raw.github.com/adamv/homebrew-alt/master/versions/mysql51.rb Source: http://stackoverflow.com/questions/4359131/brew-install-mysql-on-mac-os/6399627#6399627 Make MySQL Work Create mysql.sock file touch /tmp/mysql.sock Install MySQL default tables /usr/local/Cellar/mysql51/5.1.58/bin/mysql_install_db ...or your path Source: http://stackoverflow.com/questions/4788381/getting-cant-connect-through-socket-tmp-mysql-when-installing-mysql-on-ma/5140849#5140849

  Read the article

• VPN on OSX disconnects after precisely 2 minutes and 30 seconds on specific network

  - by Tyilo

  When connecting to my own VPN server on a specific network, called public-network, my Mac disconnects the VPN connection after 2 minutes and 30 seconds. I have performed several tests and this is the result: It works fine until the 2:30 mark It doesn't matter which Mac I use, it still disconnects It doesn't matter which client I use, all of the following does the same: OSX system client, HMA! Pro VPN and Shimo It doesn't matter which protocol I use, at least all of these protocols does the same: PPTP, OpenVPN and L2TP over IPSec The same thing happens using my own VPN server and HMA!'s VPN server. All other clients (Windows/iPhone) can use any of these VPN servers and protocols without problem on public-network On OSX, all the protocols, clients and servers works fine on any other network So it seems that it is the combination of OSX, VPN & public-network that causes this. This is the syslog from my VPN server, when the disconnection happens: Feb 2 12:04:32 raspberrypi pptpd[31400]: CTRL: EOF or bad error reading ctrl packet length. Feb 2 12:04:32 raspberrypi pptpd[31400]: CTRL: couldn't read packet header (exit) Feb 2 12:04:32 raspberrypi pptpd[31400]: CTRL: CTRL read failed Feb 2 12:04:32 raspberrypi pptpd[31400]: CTRL: Reaping child PPP[31401] Feb 2 12:04:32 raspberrypi pppd[31401]: Hangup (SIGHUP) Feb 2 12:04:32 raspberrypi pppd[31401]: Modem hangup Feb 2 12:04:32 raspberrypi pppd[31401]: Connect time 2.5 minutes. Feb 2 12:04:32 raspberrypi pppd[31401]: Sent 3963649 bytes, received 362775 bytes. Feb 2 12:04:32 raspberrypi pppd[31401]: MPPE disabled Feb 2 12:04:32 raspberrypi pppd[31401]: Connection terminated. Feb 2 12:04:32 raspberrypi pppd[31401]: Exit. Feb 2 12:04:32 raspberrypi pptpd[31400]: CTRL: Client <ip-adress> control connection finished

  Read the article

• Paused BitLocker encryption because no longer want to encrypt the hard drive - how do I get out of encrypting?

  - by Matthew Nagear

  I'm hoping someone can help. I'm not a techy and can't seem to find the same question already answered. I went to encrypt (using BitLocker) a Buffalo hard drive but after it took about 1 min to reach 0.2% 'encrypted' I decided to pause and eject, thinking this would have ended the encryption process. However, I had already assigned a password to it on the instruction pre the encryption beginning. I've since connected my hard drive again and I'm asked to input the password. If I don't I cannot access the drive. However, if I do, I CAN access the files but straight away the little BitLocker Drive Encryption dialogue box comes up saying Encryption in progress.. which I have the option to Pause. So I hit Pause straight away as I do not want to go through with the encryption. Is there any way I can stop the process and decrypt before encryption is completed? Or am I forever going to need to Pause quickly and eject. I fear that will affect my hard drive longer term. Thanks.

  Read the article

• Everyone can access my Windows 7 Homegroup file shares - Even Windows XP computers

  - by Adrian Grigore

  I have 3 computers in my network, two running Windows 7 and one running Windows XP. I've set up a homegroup on both Windows 7 computers. Also, all computers are in the same Workgroup. The problem is that one of the Windows 7 computers makes all shares accessible to the entire Workgroup instead of just sharing to the Homegroup as it should be. I created the file share in Windows 7 via right-click in the explorer, then click on "Share For" - "Homegroup (Read/Write)" (translated from German, so the actual wording may be different). Also, when I look at the file sharing properties of that folder, Windows Explorer informs me that Users must have a valid account and password for this Computer to access drive shares. Unfortunately this is not true. Being in the same Workgroup is enough to get access. Homegroup restrictions work as expected on my other Windows 7 computer. When trying to browse those shares from the XP computer, I get a dialog asking for a login and password. What might cause homegroup restrictions to fail and how can I fix this?

  Read the article

• Custom authentication method for GDM

  - by FMC

  I am trying to find a way of authenticating users on public computers through GDM, but I have a few things to be taken in account. The users do not have a login/password, they only thing they are given is a string. This string is unique and will allow us to identify them. You can see this string as a login without a password. The users must be present in a remote database The users must have the rights to login on the computer they are on at that time. A remote database would check if a booking on the computer had been set for that time by that user. Or if no booking had been made, allow to login. A default user id/home/gid has to be set to the user once logged in I have found ways to deal with most of those requirements, but not altogether. PAM looks nice to set up a custom way of checking if the user booked its computer. NSS MySQL looks nice to set up the environment. Would you know how to set up the environment by myself using a custom PAM module (using pam_python would be preferred)? Or any other method that could help me? Thanks in advance!

  Read the article

• When to use Truecrypt, and when not to?

  - by tm77

  I have about 30 (this number will most likely grow over the next few years to 50 or more) unencrypted laptops that I have been tasked to encrypt (entire drive). These machines will be used off site regularly by my users. These machines are running Windows 7 and XP (about 50/50), but more Windows 7 every month. I have experience with Truecrypt, and have had no issues. It appears to be THE solution for a free solution. My concern with Truecrypt is that my users will have 2 passswords needed to login to their machines. Also, I need to choose to either have 1 password for my organization, or carefully document each machine's password (management nightmare). In my mind, choosing between a managed and a free encryption solution is primarily based on the NUMBER of machines that will be encrypted and supported. Two questions: From a management standpoint, what is the tipping point of users where a managed solution would pay for itself over Truecrypt? What are some good third party solutions? (I will consider Bitlocker, but the price to upgrade Windows 7 licenses is a turn-off) I would love to hear from some admins with experience in supporting encrypted machines in a corporate environment. Many thanks in advance!

  Read the article

• How to prevent blocking http auth popups on firefox restart with many tabs open

  - by Glen S. Dalton

  I am using the latest firefox with tab mix plus and tabgoups manager. I have maybe 50 or 100 tabs oben in different tab groups. When I shutdown firefox and start it again all tabs and tab groups are perfectly rebuilt. But I have also many pages open that are behind a standard http auth, and these pages all request their usernames and passwords. So during startup firefox pops up all these pages' http auth windows. And they block everything else in firefox, they are like modal windows. (I am involved in website development and the beta versions are behind apache http auth.) I have to click many times the OK button in the popups, before I can do anything. All the usernames and passwords are already filled in. (And the firefox taskbar entry blinks and the firefox window heading also blinks, and focus switches back and foth, which also annoys me. And sometimes the popups do not react to my clicks, because firefox is maybe just switching focus somewhere else. This is the worst.) I want a plugin or some way to skip those popups. There are some plugins I tried some time ago, but they did not do what I need, because they require a mouse click for each login, which is no improvement over the situation like it already is. This is not about password storage (because firefox already stores them). But of course, if some password storing plugin could heal this it would be great.

  Read the article

• Matlab computations done over Apple Filing Protocol (AFP) depend on POSIX permissions, ignores ACLs

  - by flumignan

  I'm a system administrator and have never used Matlab, so forgive my general ignorance of the program. My users have encountered problems when executing scripted Matlab actions over AFP to a Mac OS X Server 10.6.7 where the access control list (ACL) should allow actions, but the POSIX-style permissions disallow the activity. It seems as if Matlab, run locally on the Mac workstations on datasets on the remote server, ignores the ACLs entirely. This is the only application I've ever seen behave this way. The server's filesystem is HFS+J and all other activity is performing as expected. These users cannot use CIFS because of our integration with external directory systems. In this example, the directory bxdata, the members of the group cibturner should be able to modify the files. Indeed, they can using any other method except via Matlab scripts. When the Matlab script hits these files, the POSIX permissions of 644 disallow modification. It's as if the ACLs are irrelevant. [root@cib 16:00:24 /14181.2_5sM]# ls -leh@ bxdata/ total 128 -rw-r--r--+ 1 kel32 staff 18K Feb 15 09:31 TS-5sMath030708-21073-1.edat 0: group:cibturner inherited allow read,write,execute,append,readattr,writeattr,readextattr,writeextattr,readsecurity,writesecurity,chown 1: group:cibsrlocaladmins inherited allow read,write,execute,append,readattr,writeattr,readextattr,writeextattr,readsecurity,writesecurity,chown 2: group:crcservergroup inherited allow read,write,execute,append,readattr,writeattr,readextattr,writeextattr,readsecurity,writesecurity,chown -rw-r--r--+ 1 kel32 staff 25K Feb 15 09:31 TS-5sMath030708-21073-1.txt 0: group:cibturner inherited allow read,write,execute,append,readattr,writeattr,readextattr,writeextattr,readsecurity,writesecurity,chown 1: group:cibsrlocaladmins inherited allow read,write,execute,append,readattr,writeattr,readextattr,writeextattr,readsecurity,writesecurity,chown 2: group:crcservergroup inherited allow read,write,execute,append,readattr,writeattr,readextattr,writeextattr,readsecurity,writesecurity,chown Because this server has HIPAA data, security is critical. We are not using networked home directories or SAN technology. The MatLab program is run on the user's hard drive; access is granted via Kerberized AFP.

  Read the article

• Why is /usr/bin/env permission denied to rails server?

  - by Eric Hopkins

  I've just set up rails on an apache server running on Ubuntu, and when I try to go to the root page it gives this error: /usr/bin/env: bash: Permission denied env and all the directories in the path all have permissions 755. I tried setting env to have permissions 777 but still got the same error. Rails is running as "nobody". Why is this happening? I don't know what else to try. In /etc/apache2/sites-available/api.conf: <VirtualHost *:80> ServerName api.thinknation.ca ServerAlias api.thinknation.ca DocumentRoot /var/www/api/public ErrorLog /var/www/logs/error.log CustomLog /var/www/logs/access.log combined RailsSpawnMethod smart <Directory /var/www/api/public> # This relaxes Apache security settings. AllowOverride all # MultiViews must be turned off. Options -MultiViews -Indexes # Uncomment this if you're on Apache >= 2.4: Order allow,deny Allow from all #Require all granted </Directory> </VirtualHost> From config/database.yml in my rails directory (with sensitive user names and passwords omitted): default: &default adapter: mysql2 encoding: utf8 pool: 5 username: root password: socket: /var/run/mysqld/mysqld.sock development: <<: *default database: api_development test: <<: *default database: api_test production: <<: *default url: <%= ENV['DATABASE_URL'] %> database: api username: ------------ password: ------------ Not sure what other details or files are relevant, I will add them if needed.

  Read the article

• Mod_rewrite (CakePHP routing functionality) forbidden after Snow Leopard upgrade

  - by Ryan Ballantyne

  Hello ServerFault, I am using the standard Apple-provided installations of PHP 5.3 and Apache 2 to do web development on a Mac Pro that I just upgraded to Mac OS X 10.6 (Snow Leopard). The upgrade went well enough, if I ignore the fact that it destroyed my ability to get work done. ;) After the update, the CakePHP application I was developing started giving me 403 Forbidden errors when accessed. Based on the errors in the log file, I've determined that Apache is choking on the mod_rewrite rules in Cake's .htaccess file. Here's the file, in its entirety: <IfModule mod_rewrite.c> RewriteEngine on RewriteRule ^$ app/webroot/ [L] RewriteRule (.*) app/webroot/$1 [L] </IfModule> It's not that the rules themselves are wrong, but that Apache is forbidding the use of mod_rewrite altogether. All other pages on the machine work fine, and the 403 errors go away if I comment out the .htaccess file (but nothing works, of course). In my httpd.conf file, I've tried changing this: <Directory /> Options FollowSymLinks AllowOverride None Order deny,allow Deny from all </Directory> To this: <Directory /> Options FollowSymLinks AllowOverride All Order deny,allow Allow from all </Directory> ...which has no effect. I don't know much about Apache configuration files, and I'm quite stuck on this. In fact, I know little enough that I'm not sure which information about my setup is needed to enable people to provide useful answers. I'm just using the vanilla OS X setup, nothing fancy. Googling has yielded no fruits for me this time, so I'm turning to you. Any ideas?

  Read the article

• Virtual host config issues in osx 10.7 server app

  - by Benno

  I have two mac mini lion servers setup to run as production and staging machines. My sysadmin decided on these machines over the previous CentOS we had because it had an "interface" to be able to manage it, rather than just the terminal. To be honest, I prefer the terminal. My problem is, the mac osx 10.7 server.app seems to be having issues with the creation of virtual hosts in the 'Web' section. It seems VERY touchy. For example, I cannot create a http virtual host first. I have to create a https host first with a unique dns name 9e..g vuly6), then create the http host with a different dns name to the first (e.g. www), or it appears to override it the first one, even though one is ssl and one is non-ssl. Further, it seems to override perfectly good configurations at random. For example, the default sites directory is usually /Users/default/Sites/Customsites or something, but sometimes when I load the server.app it changes to /var/empty. Also, if I change or add extra virtual hosts after the first one or two, it starts to mess up and the first two virtual hosts start having issues. Has anyone had any experience with setting up virtual hosts via this app? Am I able to manually create these virtual hosts, without using the app, and without the app overriding my settings when I restart apache?

  Read the article

• How do I export address book from N97

  - by mplungjan

  Hi, I need to copy my numbers from my private Nokia to my office BB. I have not found a way to export my phone numbers from ovi or elsewhere. On Mac iSync stopped working with snow leopard and OVI on windows does not export. I do not mind using a windows suggestion. I lost a description on how to use the ovi backup files in another program. What I have done so far terminal: sudo open -a iSync.app - it launched but iSync said "this device is not supported by iSync" went here http://europe.nokia.com/support/product-support/isync/compatibility-and-download found a plugin (I am sure that was not there a while ago :| ) Checked software version 22.0.110 installed plugin Ran iSync which found and installed my N97 device successfully. synced. It stopped with The connection was lost while talking to the phone. http://discussions.europe.nokia.com/t5/Nseries-and-S60-Smartphones/N97-iSync-Multimedia-Transfer-Modem/m-p/568560 no news since Jan 2010. Tried to download and install http://best-vcard.en.softonic.com/symbian but the installer fails :( I simply do not understand why Nokia is giving us such a hard time. I would not have considered switching from Nokia if Mac had been better supported. It is so frustrating that they just seem not to care losing Nokia fanbois like me - especially since I am this outspoken on the net and what i say on popular forums gets indexed by google fast. I am very close to just go iPhone here. Hope someone has Nokia's ears UPDATE: I Downloaded NbuExplorer from sourceforge. It will extract everything from an OVI backup into VCF, VCS and VMG files. Very useful software and free.

  Read the article

< Previous Page | 412 413 414 415 416 417 418 419 420 421 422 423  | Next Page >