Search Results

Search found 13401 results on 537 pages for 'double checked'.

Page 418/537 | < Previous Page | 414 415 416 417 418 419 420 421 422 423 424 425  | Next Page >

• Dell Inspiron 1564 overheating but fan not switching on, how to diagnose?

  - by Smugrik

  I've got a Dell Inspiron 1564 laptop that is about one and a half years old. Since about a week, the laptop started to overheat, causing it to switch off unexpectedly... The cpu fan is working erratically, it can start to spin for a while, doing its job and cooling down the cpu before it stops, but then the temperature goes up, and the fan doesn't reacts, once the temperature reaches a critical point (over 85 celsius, checked with speedfan...), the laptop switches off... I already cleaned the vents and fan from dust, to no avail, and it was actually quite clean anyway. Drivers and bios are up-to-date, no crapware was ever installed on this machine. I don't know how to diagnose the problem, could it be the temperature sensors that sends wrong information, so the fan doesn't reacts? but then I believe the computer wouldn't detect the overheat and stop... Is there a way I can pin point the problem? Maybe some low-level diagnostic tools to check functionality of sensors and fans??? The warranty is already over so any suggestion would be welcome. Thanks!!

  Read the article

• haproxy: Is there a way to group acls for greater efficiency?

  - by user41356

  I have some logic in a frontend that routes to different backends based on both the host and the url. Logically it looks like this: if hdr(host) ends with 'a.domain.com': if url starts with '/dir1/': use backend domain.com/dir1/ elif url starts with '/dir2/': use backend domain.com/dir2/ # ... else if ladder repeats on different dirs elif hdr(host) ends with 'b.domain.com': # another else if ladder exactly the same as above # ... # ... else if ladder repeats like this on different domains Is there a way to group acls to avoid having to repeatedly check the domain acl? Obviously there needs to be a use backend statement for each possibility, but I don't want to have to check the domain over and over because it's very inefficient. In other words, I want to avoid this: use backend domain.com/url1/ if acl-domain.com and acl-url1 use backend domain.com/url2/ if acl-domain.com and acl-url2 use backend domain.com/url3/ if acl-domain.com and acl-url3 # tons more possibilities below because it has to keep checking acl-domain.com. This is particularly an issue because I have specific rules for subdomains such as a.domain.com and b.domain.com, but I want to fall back on the most common case of *.domain.com. That means every single rule that uses a specific subdomain must be checked prior to *.domain.com which makes it even more inefficient for the common case.

  Read the article

• Help Installing SQL Server 2008 Express Edition

  - by Jordan S

  Ok I am running Windows 7, 64 bit. I cleaned of SQL server 2005 completely off my system leaving only SQL Compact Edition. I went here http://www.microsoft.com/downloads/details.aspx?FamilyID=01af61e6-2f63-4291-bcad-fd500f6027ff&displaylang=en and installed SQL Server 2008 Express Edition Service Pack 1. After the install, under my start bar menu all i have for SQL configuration tools are the Configuration Manager, Error and Usage Reporting and the Install Center. I don't have the SQL Managment Studio. So I went here http://www.microsoft.com/downloads/details.aspx?FamilyID=08e52ac2-1d62-45f6-9a4a-4b76a8564a2b&displaylang=en and downloaded the SQL Server 2008 Management Studio Express but when I try to install it I get a warning says This program has known compatibility issues and that I need to Install SQL Server 2008 Service Pack 1. I thought that is what I installed. So, I tried to continue running the install but I then get an error message that says Invoke or BeginInvoke can not be called on a Form before it is opened... How can I check if Service pack 1 is installed or not? What should I do? Also I rebooted my system and checked for Windows Updates and it says that Windows it up to date.

  Read the article

• Apache2 - 500 internal server error

  - by Lucio Coire Galibone

  i'm running a VPS with Linux CentOs 6 with 4 GB of RAM, 10 GB of HD and 2 virtual CPU Intel(R) Xeon(R)CPU L5640 @ 2.27GHz. As my host says each virtual CPU must be at least 0.5 physical cpu. At certain times of the day, those with more traffic, trying accessing my php script i receive intermittently "500 internal server error". I activate logging to debug level from apache, and also the PHP logging with E_ALL, but I can't find reference to Error 500 in any logs(I checked the right logs!). I haven't got any .htaccess file in path script. The strange thing is that the error start at first php line in the script (the previous html displays correctly, but at the first php line the script send 500 error). The cpu load is always good (max 0.15 0.08 0.01) and RAM is close to 95% but it arrived to swap just 2 times in a month with 2-5 MB. Apache works with prefork with this values: <IfModule prefork.c> StartServers 8 MinSpareServers 5 MaxSpareServers 20 ServerLimit 280 MaxClients 280 MaxRequestsPerChild 4000 </IfModule> Everthing works correctly and I don't get any error in quiet times, but i start receive errors when traffic rises (6-9000 visits per hour). Can i solve the problem increasing resources? (i can upgrade RAM up to 16 GB). It can depend from reaching MaxClients (but apache must write it on log, right?)? If I upgrade RAM to 6 or 8 GB i have to calculate MaxClients value with this? MaxClients = Total RAM dedicated to the web server / Max child process size Max child process size is around 20M. How else can the problem be? Thanks in advance

  Read the article

• PDFs and Networked Printers

  - by Bart Silverstrim

  Weird issue. We have users printing to networked windows-shared printers (print server Win2003 sp2). Some users have been reporting recently that they can't print PDF documents to particular printers (two example printers are HP 2430 PCL 6 driver and 4250 PCL 6 driver). At first, we found that on many of these systems the "Everyone" object was added to the permissions for the root of the C: volume but had no permissions checked. We added modify privileges to it (these are Deep-Freeze systems, so modifications to these systems that we don't add as administrators won't matter) and they seemed to be able to print. Perhaps Acrobat Reader was writing a temp file for printing where users didn't have permission, we surmised, and made the change and moved on. Yesterday the user called in saying it's not working still. Looked at it; bring up a PDF, click Print and the reader app says that you have to install a printer. Look at the printers folder (Windows XP workstation), and it has printers installed. Print a test page, return to AcroReader, and it will print fine to that printer. The whole time web pages, MS Office documents, etc. print without issue to the same printers. Has anyone seen this issue with Acro Reader 9 and certain network printer drivers or shares involving HP printers? I'd post this to SuperUser but it seems to be associated with a networked printer issue, seems to affect subsets of users but may be more widespread and our users aren't reporting it to us assuming we just know about it, and I've not found rhyme or reason as to why it's affecting just PDF printing and particular printers. The print spoolers are all running on the workstations and print server without errors being logged so far, but I'm going through the logs now to see if I can find anything out of place.

  Read the article

• Windows 7: Image thumbnails fail to appear

  - by Fopedush

  All right, I've got a pretty strange one here. Since I installed Windows 7 on this machine some time ago, image thumbnails have never worked properly. For the vast majority of images, they completely fail to show up, showing the icon of the default image viewing application instead. Please note that the “Always show icons, never thumbnails” option in folder options is not checked. I've taken a screenshot demonstrating the problem, here: Sometimes, a few image thumbnails will show up correctly, maybe about one in ten, with the rest failing as well. Another screenshot, with a handful of thumbnails visible, can be seen here: Windows explorer does not appear to make any effort to populate the missing thumbnails, and there is no appreciable CPU usage. I can leave a window with missing thumbnails open all night and they will still never appear. Newly created images never generate thumbnails, only images that have been on the system since day one will occasionally show them. This leads me to believe that explorer is set to show thumbnails, but whatever process is supposed to be in charge of actually generating them has failed somehow. In previous versions of windows, explorer.exe itself was responsible for thumbnail generation – has this changed? Any suggestions at all – even if you aren't sure that they will work – are welcome. I'd hate to have to wipe and reinstall on this machine for such a minor annoyance.

  Read the article

• Mysql Cluster not working on Ubuntu

  - by user53864

  I am unable to setup MySQL Cluster on ubuntu servers. As a starting point I started from the link but I am not successful and the tar ball version I download is 6.3.45. As I wanted to test the mysql cluster, the Data node and SQL node are same but sql never appeared as connected in management node console and it looks like below. [ndbd(NDB)] 2 node(s) id=2 @192.168.1.107 (Version: version number, Nodegroup: 0, Master) id=3 @192.168.1.108 (Version: version number, Nodegroup: 0) [ndb_mgmd(MGM)] 1 node(s) id=1 @192.168.1.105 (Version: version number) [mysqld(API)] 2 node(s) id=4 (not connected, accepting connect from 192.168.1.107) id=5 (not connected, accepting connect from 192.168.1.108) On all the 3 machines mysql-server & client(apt-get install mysql-server mysql-client) were already installed and I completely stopped and also removed them at the system start up. Now the mysqld is from extracted cluster tar ball(/usr/local/mysql/support-files/mysql.server). As for testing, I created a test database on both the data nodes but the tables are also not syncing on other node. I checked many links, configurations are remained similar in all the links but somewhere it's going wrong. Anymore extra package is required?, Could anyone help me here..?. I am trying this for past 3 days... Thank you!

  Read the article

• Mac OS X Client With Static DHCP Assignment Requests Wrong IP via Option 50

  - by Starchy

  I have a number of Mac (and a few Linux) laptops getting DHCP from a Force10 layer 3 switch, the only DHCP server on the subnet. There's a global dynamic pool, and for each full-time employee's laptop I have a single IP static pool set by MAC address. One and only one of the clients, running OS X 10.7.5, consistently fails to get a static assignment. The MAC address in the static pool definition has been carefully re-checked. Running tcpdump on a mirrored port when the laptop connects, I see that it is specifically requesting 10.100.0.252 (a dynamic address): 11:32:10.108280 IP (tos 0x0, ttl 255, id 28293, offset 0, flags [none], proto UDP (17), length 328) 0.0.0.0.bootpc > broadcasthost.bootps: [udp sum ok] BOOTP/DHCP, Request from 3c:07:54:xx:xx:xx (oui Unknown), length 300, xid 0x1399da89, Flags [none] (0x0000) Client-Ethernet-Address 3c:07:54:xx:xx:xx (oui Unknown) Vendor-rfc1048 Extensions Magic Cookie 0x63825363 DHCP-Message Option 53, length 1: Request Parameter-Request Option 55, length 9: Subnet-Mask, Default-Gateway, Domain-Name-Server, Domain-Name Option 119, LDAP, Option 252, Netbios-Name-Server Netbios-Node MSZ Option 57, length 2: 1500 Client-ID Option 61, length 7: ether 3c:07:54:xx:xx:xx Requested-IP Option 50, length 4: 10.100.0.252 Lease-Time Option 51, length 4: 7776000 Hostname Option 12, length 10: "host-name" END Option 255, length 0 PAD Option 0, length 0, occurs 8 I haven't been able to find any extra system prefs or unusual software on the laptop. Disabling the interface and rebooting or temporarily setting the IP manually both fail to make any difference. Any suggestions appreciated.

  Read the article

• Enabling AHCI in BIOS for SSD

  - by Robert

  I am trying to help a friend with a desktop upgrade. It is an old machine with an Intel DG31 main board. The board has 1 IDE port to which a DVD-ROM drive is connected, and 2 SATA ports. 1 SATA port had a hard drive with XP on it. I have made that the secondary drive now and wiped the OS as requested, so it is just for data. The new SSD has been installed but I read that for best results one must enable AHCI in the BIOS? So I checked and in the BIOS there is a SATA Mode setting with 2 options - Native and Legacy. I think Native means AHCI? After setting to Native, I installed Windows 7 Home Premium and all the latest drivers from Intel's website and all Windows Updates. Now when I check Device Manager I see this: Also Microsoft says HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Msahci\Start and HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\IastorV\Start should have value 0 for AHCI but I see that the value is 3 for both. So does this mean that Native mode is not AHCI? Or Windows 7 ignored BIOS setting and installed in IDE mode, maybe because both cables are present? Please help me enable AHCI on this system. Thanks!

  Read the article

• cannot connect to sql server express from sql server standard

  - by Jackson Sunuwar

  ... like my title says... I cannot connect to my instance on sql server express from sql server standard... I have tried disabling firing wall and checked sqlbrowser is started but for some reason I cannnot connect to my datbase... called server_name\sqlexpress.. I have a virtual machine and a full scale MS SQL Server 2008 R2 running on it... and I have several other vm running sqlexpress. they run fine and I can connect to them using sqlexpress... but when i try to access from sqlserver... I get this error. A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1) Digging deep into the error, I found this Error Number: -1 Severity: 20 State: 0 and finally this... Program Location: at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Open() at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server) at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser() Firewall is turned off on the VM that's running mssqlserver... I turned of firewall on one of the vm that's running the sqlexpress but I still get the error... can someone please help... thank you

  Read the article

• can't Remote desktop to windows XP, blaming the server side

  - by Jin

  After rebooting my work PC (windows XP sp3) this Wednesday (thank to Microsoft Tuesday), I found that I can't remote desktop to my work PC from home (with VPN to company). I have been remote-desktop to work for years and I am really surprised since connectivity is not the problem, so I brought up wireshark to sniff the packets. I can see after TCP handshake, client sent X.224 Connection Request 03 00 00 13 0e e0 00 00 00 00 00 01 00 08 00 03 00 00 00 server sent X.224 Connection Confirm. 03 00 00 0b 06 d0 00 00 12 34 00 According to "MS-RDPBCGR", the official spec on RDP, the server should include Negotiation Response in the "Connection Confirm" message but it didn't. It's empty. I googled a lot but didn't find any clue on why server did that. By the way, I used the same remote desktop client and can connect to other windows XP PC. Here are a couple of pieces of information that may help to give a clue: Since TCP handshake (server port being 3389), I believe the svchost service is actually running. going to control panel -- system window, --- "Remote" tab, the remote desktop is indeeded checked and it states that my username is allowed. according to the packet capture, client didn't even get a chance to tell server what user was trying to logon. Yes, the progress bar showed up a few seconds and then it went back to the "Remote desktop Connection" window again. Searched "windowsupdate.log", didn't find any appearance of the word "remote".

  Read the article

• Mainboard shuts itself off after half a second or so

  - by heishe

  Here's the problem: When I start the PC, the mainboard powers up, then stays that way maybe 0.2-0.5 seconds, and then shuts off again. I say mainboard, and not PC, because I removed all the parts from the system and disconnected everything but the mainboard power supply (the broad 12 pin thingy). When I have the other parts (cpu, graphics card, ram, etc.) installed and connected, the basic behaviour stays the same, but now the mainboard runs for about 6 or 7 seconds (this is a guess) before shutting off. This all started when my monitor wouldn't receive a video signal today, without giving POSTs, so I took the graphics card and the RAM out to see if it changes anything. It didn't, except that from that point on the mainboard would start to have this behavior where it just stays on for a very short time and then shuts off again. I already tested it with a backup PSU - same behavior. What could this be? I'm thinking it can't be on a physical level (transistors burned through or something like that), since then the mainboard either shouldn't start at all or it should detect hardware failures in non-essential parts of the syste and start beeping. Sorry, I forgot to mention. It's an MSI P67A-C43. I already checked the capacitors if someone popped, but I can't find anything. I also tried resetting the cmos, but that didn't change anything.

  Read the article

• DNS Does Not Register at Off-site Locations

  - by Russ Warren

  First of all, let me give you the specifics of our setup: Windows Small Business Server 2008 Domain w/ all applicable updates on the DC The DC does DHCP for the main site The DC does DNS for all sites 3 sites including our headquarters where the DC is located All sites are connected through OpenVPN SSL tunnels terminated by an Untangle box at each site The 2 remote sites us the Untangle box as a DHCP server for their subnet, which assigns the DC as the primary DNS server Collection of Windows XP and Windows 7 workstations connected to the domain Here's the issue: All of the workstations at the main site register with the DNS server on the domain controller fine. As they grab an IP from the DHCP server, it updates the DNS server with the new host record. I have 2 systems (each at different remote sites) that fail to register with the DNS server. I've attempted the following troubleshooting steps: Confirmed the network adapter is using the DC as a DNS server Confirmed 2-way traffic is possible between DC and workstation Verified the "Register with DNS server" setting was checked in the adapter properties Attempted ipconfig /registerdns and received no errors For the time being, I have setup a DHCP reservation for these systems and manually created a host record. This seems to work fine, but I need a solution for any new systems that go out there.

  Read the article

• PHP - Centos OpenSSL error

  - by mabbs

  i'm currently having a problem with OpenSSL on my Centos 6.5 Server. it ran perfectly fine until sunday. and i checked the error_log and i saw this error in the log PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib64/php/modules/openssl.so' - /usr/lib64/php/modules/openssl.so: cannot open shared object file: No such file or directory in Unknown on line 0 i tried phpinfo(); and i found that openssl is enabled i tried php -m it returned [PHP Modules] bz2 calendar Core ctype curl date dom ereg exif fileinfo filter ftp gd gettext gmp hash iconv interbase json libxml mbstring mcrypt memcache mysql mysqli openssl pcntl pcre PDO PDO_Firebird pdo_mysql pdo_sqlite Phar pspell readline Reflection session shmop SimpleXML snmp sockets SPL sqlite3 standard tokenizer wddx xml xmlreader xmlrpc xmlwriter xsl zip zlib UPDATE this is what i got from rpm -qa | grep php just like what Mike Suggested php-php-gettext-1.0.11-3.el6.noarch php-mcrypt-5.3.3-3.el6.x86_64 php-interbase-5.3.3-3.el6.x86_64 php-pdo-5.3.3-27.el6_5.1.x86_64 php-5.3.3-27.el6_5.1.x86_64 php-mysql-5.3.3-27.el6_5.1.x86_64 php-snmp-5.3.3-27.el6_5.1.x86_64 php-gd-5.3.3-27.el6_5.1.x86_64 php-xml-5.3.3-27.el6_5.1.x86_64 php-pear-1.9.4-4.el6.noarch php-pecl-memcache-3.0.5-4.el6.x86_64 phpMyAdmin-3.5.8.2-1.el6.noarch php-common-5.3.3-27.el6_5.1.x86_64 php-cli-5.3.3-27.el6_5.1.x86_64 php-devel-5.3.3-27.el6_5.1.x86_64 php-mbstring-5.3.3-27.el6_5.1.x86_64 php-xmlrpc-5.3.3-27.el6_5.1.x86_64 php-pspell-5.3.3-27.el6_5.1.x86_64

  Read the article

• PHP output buffer settings ignored by server

  - by Ecom Evolution

  I have been trying to flush the output of certain scripts to the browser on demand, but they do not work on our production server. For instance, I tried running the "Phoca Changing Collation tool" (find it on Google) and I don't see any output until the script finishes executing. I've tried immediately flushing the buffer on other scripts that work fine on any server but this one using the following code: echo "something"; ob_flush(); flush(); Setting "ob_implicit_flush(1);" doesn't help either. The server is Apache 2.2.21 with PHP 5.2.17 running on Linux. You can see our php.ini file here if that will help: http://www.smallfiles.org/download/1123/php.ini.html This isn't the only problem we are having with the server ignoring in-script directives. The server also ignores timeout coding such as: ini_set('max_execution_time', 900*60); AND set_time_limit(86400); Script always times out at the php.ini default. Doesn't seem to matter if script is executed in IE or Firefox. Tried "ini_set('zlib.output_compression_level', 'Off');" and checked that it is "Off" in the php.ini file. The code "apache_setenv('no-gzip', 1);" causes a fatal error so tried uploading a .htaccess file with the "mod_gzip_on No" directive. Neither helps. Tried running Apache as fcgi and suphp, but same results. Server is NOT in safe mode. Pullin ma hair out!

  Read the article

• NOQUEUE: SYSERR(root): opendaemonsocket: daemon MTA-v4: cannot bind: Address already in use

  - by Francesco

  I have an issue with sendmail on my server (ubuntu 12.10) with php, mysql,and wordpress installed. Basically I want to create a contact form in my blog to receive emails from visitors directly into my gmail account but it doest work! I created a php file called testmail.php to recall it from the browser: <?php $to = '[email protected]'; $subbject = 'TEST MAIL'; $msg = 'test test test test test test test test test test test test test test test'; $isMailed = mail($to, $subbject, $msg, 'From:me <[email protected]>'); if($isMailed) echo 'mail has been send to: ' . $to; else echo 'mail has NOT been send..'; ?> But I dont receive anything! The /var/log/mail.log says: NOQUEUE: SYSERR(root): opendaemonsocket: daemon MTA-v4: cannot bind: Address already in use What do i do wrong? Where do I need to check? What info do you need more? I checked also into the spam folder, nothing. Thank you!

  Read the article

• Unable to Access Localhost after starting Xampp

  - by user7370

  OS: Windows XP Professional, SP 2. Few days back i had xampplite 1.7.1 installed and was able to access localhost and phpmyadmin through browser...... Today it suddenly stopped working. In firefox after i type http://localhost/ nothing happens, just blank white screen. I removed all the files in xampplite folders and re-installed ver 1.7.1 again, it's of no use. Then i installed xampplite 1.7.2 (latest), which i had downloaded from xampp website, again it's of no use. Apache and MySql are running though. I tried using locally installing wordpress, as i have a theme ready and want to convert that design to wordpress, test it and start using it online. Running 'Port-check' on xampp control panel showed this -- RESULT ------ Service -- -- Port -- -- Status -- --------------------------------------------------- Apache (HTTP) -- 80 -- C:\xampplite\apache\bin\httpd.exe Apache (WebDAV) -- 81 -- free Apache (HTTPS) -- 443 -- C:\xampplite\apache\bin\httpd.exe MySQL -- 3306 -- C:\xampplite\mysql\bin\mysqld.exe FileZilla (FTP) -- 21 -- free FileZilla (Admin) -- 14147 -- free Mercury (SMTP) -- 25 -- free Mercury (POP3) -- 110 -- free Mercury (IMAP) -- 143 -- free Mercury (HTTP) -- 2224 -- free Mercury (Finger) -- 79 -- free Mercury (PH) -- 105 -- free Mercury (PopPass) -- 106 -- free Tomcat (AJP/1.3) -- 8009 -- free Tomcat (HTTP) -- 8080 -- free --------------------------------------------- I also Have skype installed but it's not using 'Port 80' (as i have read, this was the issue, but checked under skype option the port is 65013). And when i run file:///C:/xampp/htdocs/index.php - it shows "Something is wrong with the XAMPP installation :-( " Please help with this problem. thanks Sharath kumar

  Read the article

• Cannot Install Bootcamp on Mac Fusion Drive

  - by user3377019

  I have two drive installed in my mid-2013 Macbook pro. It is running osx maverick. I set the two drives (an ssd and a regular HD) up using the fusion drive (following the diy fusion drive guides out there). I went ahead and created a 40gb partition to host my windows install. I removed the SSD, installed windows, then reinstalled the SSD. As soon as the ssd was placed back in the bootcamp partition stopped booting. I get a blinking cursor on a black screen. I checked out the partition info in disk utility and it appears that the windows partition is not marked bootable. Below is some info I managed to gather. I am wondering if there is a way to fix the partition table so my bootcamp will boot. /dev/disk0 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *120.0 GB disk0 1: EFI EFI 209.7 MB disk0s1 2: Apple_CoreStorage 119.7 GB disk0s2 3: Apple_Boot Boot OS X 134.2 MB disk0s3 /dev/disk1 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *500.1 GB disk1 1: EFI EFI 209.7 MB disk1s1 2: Microsoft Basic Data BOOTCAMP 40.0 GB disk1s2 3: Apple_CoreStorage 459.2 GB disk1s3 4: Apple_Boot Boot OS X 650.0 MB disk1s4 /dev/disk2 #: TYPE NAME SIZE IDENTIFIER 0: Apple_HFS Macintosh HD *573.4 GB disk2 Name : BOOTCAMP Type : Partition Disk Identifier : disk1s2 Mount Point : /Volumes/BOOTCAMP File System : Windows NT File System (NTFS) Connection Bus : SATA Device Tree : IODeviceTree:/PCI0@0/SATA@1F,2/PRT1@1/PMP@0 Writable : No Universal Unique Identifier : 584BAED6-4C46-4F18-93B3-957F6E27003C Capacity : 40 GB (39,998,980,096 Bytes) Free Space : 16.34 GB (16,339,972,096 Bytes) Used : 23.66 GB (23,659,003,904 Bytes) Number of Files : 86,424 Number of Folders : 0 Owners Enabled : No Can Turn Owners Off : No Can Be Formatted : No Bootable : No Supports Journaling : No Journaled : No Disk Number : 1 Partition Number : 2

  Read the article

• rsync not copying hard links

  - by A.Ellett

  I have two computers (both MacBook Airs) for which I sync one directory tree in both, but not the entire hard drive or any other directories. Let's say on computer A the directory is /Users/aellett/projects Let's say on computer B the directory is /Users/bellett/projects Generally, I'll log into computer B and then remotely connect to computer A as user 'aellett'. As super user I sync the two project directories as follows: rsync -av /Volumes/aellett/projects/ /Users/bellett/projects/ and this works as expected. On both computers I have another file letter.txt in a different directory which is not getting synced. Let's say on computer A the file is found in /Users/aellett/letters On computer B the file is found in /Users/bellett/correspondence Generally, I don't want to share what's not included in /Users/<username>/projects. But I do want to share this particular file. So on both computer I made a correspondence directory in projects. And then I made hard links as follows On computer A: ln /Users/aellett/letters/letter.txt /Users/aellett/projects/correspondence/letter.txt On computer B: ln /Users/bellett/correspondence/letter.txt /Users/aellett/projects/correspondence/letter.txt The next time I synced the two computers I did the following rsync -av -H /Volumes/aellett/projects/ /Users/bellett/projects/ When I checked on computer B, /Users/bellett/projects/correspondence/letter.txt was correctly synced. But, the hardlink to /Users/bellett/correspondence/letter.txt was no longer there. In other words, /Users/bellett/projects/correspondence/letter.txt was identical to /Users/aellett/projects/correspondence/letter.txt but it differed from /Users/bellett/correspondence/letter.txt. Since these two files were hard linked on both computers, I expected them to still have the hard link. Why are my hard links not being preserved?

  Read the article

• How do I diagnose a bottleneck in an Intel Atom based Ubuntu server?

  - by Jon Cage

  I have a small media server at home which has software raid and a gigabit link to the rest of my network. For some reason though, I only get ~10MB/s transfers when copying to/from the server. I use software RAID5 (mdadm) over 4 1TB disks. On top of that I then use LVM to give me a huge pool of disk space which is then split up into multiple partitions which can be resized as and when they need it. I'm guessing this it most likely the cause, but I'd like to know for sure where the root cause is. So, how can I benchmark network throughput (Windows 7 desktop <- Ubuntu server) and hard disk performance to try and identify where my bottleneck might be? [Edit] If anyone's interested, the motherboard is an Intel Desktop Board D945GCLF2. So that's a 300 series Atom processor with the Intel® 945GC Express Chipset [Edit2] I feel like such a fool! I just checked my desktop and I had the slower of the two onboard NICs plugged in so the server is probably not at fault here. Transferring a copy of ubuntu off the server I get ~35-40MB/s according to Windows 7. I'll do those HD tests when I get a chance though (just for completeness).

  Read the article

• samba4 dc "network location cannot be reached"

  - by mitchell babies peters

  to clear the air centos 6.4? (maybe 6.3) as the server, running samba 4.0.10, trying to add a windows 7 client that has connectivity to the server. this is what windows shouts as me as it mocks my dependence on network infrastructure. "the network location cannot be reached." i have access to the domain contoller (dc) im using the dc as the domain name server (dns) already, and the name is correctly resolving, and it is correctly forwarding outbound traffic. i have nothing but self taught experience with active directory(ad) so if i am missing something obvious, please shout it out, but keep the verbal abuse to a minimum. i checked samba4DC + my error and found nothing relevant to my issue, if i missed something please point me in that direction. the weekend is just starting as i write this so i probably wont be back on to check this post for a day or three, but i might because this mystery is killing me. i followed the samba4 as a dc guide here and i supplimented gaps with this i have tested kerberos, ntp, and set my DC as the clock to sync to in my windows client and it appears to be a very small fraction of a second off so that shouldn't be it. also, firewall and selinux are both off for testing. i have also tried disabling ipv6, and cleared the registry of ipv6 records (allegedly the default samba4 as a DC runs as windows server 2003 which allegedly does not support or tolerate the existence of ipv6, fair warning, i heard this on the internet so it is probably a lie) i have tried a few other things that i have forgotten because i have been doing this for a day and a half now. ideas welcome. suggestions for alternatives are also welcome, as long as they are free. i was given a budget of $0 dollars and told to implement active directory (no prior knowledge of active directory at that point).

  Read the article

• Need to find jni.h in cmake on Mac

  - by Ilan Tal

  I am trying to make VTK compile on a Mac Air machine. I am using CMake 2.8-9, using Xcode4 as the generator. If I press the Configure button with VTK_WRAP_JAVA not checked, it will go with no errors. However I definitely need to use the wrap java since my main program is in Java and I need to get to VTK which is c++. As soon as I check the wrap Java, I get Could NOT find JNI. It apparently is looking for jni.h which in Linux there is no problem finding, but in the Mac it apparently can't find it. I did a locate jni.h and got new-host-2:~ geraldkolodny$ locate jni.h /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.7.sdk/System/Library/Frameworks/JavaVM.framework/Versions/A/Headers/jni.h /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.8.sdk/System/Library/Frameworks/JavaVM.framework/Versions/A/Headers/jni.h /Library/Java/JavaVirtualMachines/jdk1.7.0_07.jdk/Contents/Home/include/jni.h I tried to manually put into JAVA_INCLUDE_PATH2 either entry 2 or 3 (without the jni.h at the end), but it still can't find jni.h. Xcode used to have a template for jni but that is now gone in the latest version. I am fresh out of ideas on how to solve this problem. I'd be grateful for any suggestions. Thanks, Ilan

  Read the article

• WS 2008 R2 giving "Internal Server Error"

  - by dragon112

  I have had this problem for a while now and can't find the problem at all. When i open a page it will sometimes give a 500 Internal Server Error message. This hapens on a website that works perfectly but when i try to upload anything it will give this message(all php settings have been set to either 1gb or 3000 seconds as well as the iis headers). Also when i open a simple page which does nothing more than include another php page and include a couple of classes the error will occur. I have no idea what causes this error and would love to hear from any of you on what this could be. I checked the server logs and for the upload issue i found this error: The description for Event ID 1 from source named cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer. If the event originated on another computer, the display information had to be saved with the event. The following information was included with the event: managed-keys-zone ./IN: loading from master file managed-keys.bind failed: file not found the message resource is present but the message is not found in the string/message table Regards, Dragon

  Read the article

• Problem importing pictures from a digital camera with Windows 7

  - by snark

  Hi, Since I'm using Windows 7 (Beta, then RC, now RTM), I have issues when I download pictures from my digital cameras. It happens with my 2 cameras: a Canon Powershot S2 IS and a Canon Ixus 80 IS. When I plug a camera (any of them) to a USB port and switch it on in Play mode, the Autoplay function of Windows 7 starts with this screen: I select "Import pictures and videos" to call the native Windows 7 tool. It searches a bit for pictures to download from the camera and starts the transfer. However, during the transfer, I often get errors like this one: If I use "Try again", it works fine the second time and the picture is retrieved correctly. It's very annoying when it happens 20 or 30 times in a 500-picture download. I cannot leave it running standalone, as I have to watch for the errors and click on "Try again". Any idea what is causing these errors? I tried changing the USB port (normally the cameras are connected via a USB hub but it happens also when I connect them directly to a MB USB port) and the USB cable, but no success. I also checked the SD card by connecting them with a card reader and running a ChkDsk on them but it found no errors on the cards. Update: No problem when I copy the pictures manually with the Windows Explorer. And no problem either when I access the card with a reader. The builtin import tool of Windows is convenient as it sorts the pictures automatically by date (1 folder per day). And this is the way I sort my pictures

  Read the article

• 1 document pending in printer queue in System Tray that won't go away

  - by White Phoenix

  Edit: I didn't want to do it, but I restarted my computer - cleared the problem right away. Though if I were running a Windows 2003/2008 server, I would hate to have to restart the domain controller just to get rid of this irritating problem. If I run into this problem again, I'm going to try that remove printer/reinstall printer thing. Thanks for your help @Psychogeek. Points for your attempt. Running Windows 7, 32-bit Professional. My printer is an HP OfficeJet Wireless 8500. It's connected to my network wirelessly through TCP/IP as a standalone device. I was having some print problems awhile back and had to do some print spooler stuff as part of my troubleshooting (stopping the Print Spooler service, clearing the print spooler files from C:\Windows\System32\spool\PRINTERS and then restarting the service). I've finally narrowed it down to it being application specific, so that's that. However, as a leftover from all that troubleshooting, my printer icon is stuck in the tray - when I mouseover the icon, Windows says that there is 1 document(s) pending for my username. However, when I open up that printer's queue, there's nothing in there. I restarted the Printer Spooler service and also checked C:\Windows\System32\spool\PRINTERS if there's anything in there - nothing. I did a quick Google search and an answer from one of those "reps" at the Microsoft Socialnet site says for me to uninstall and reinstall the printer. The funny thing is, when I send print jobs, they print just fine - that 1 mystery document stuck in queue isn't stopping anything from happening. Short of having to do that, are there any other quick troubleshooting steps I may be missing?

  Read the article

< Previous Page | 414 415 416 417 418 419 420 421 422 423 424 425  | Next Page >