Search Results

Search found 11409 results on 457 pages for 'large teams'.

Page 418/457 | < Previous Page | 414 415 416 417 418 419 420 421 422 423 424 425  | Next Page >

• SQL Saturday 43 in Redmond

  - by AjarnMark

  I attended my first SQLSaturday a couple of days ago, SQLSaturday #43 in Redmond (at Microsoft).  I got there really early, primarily because I forgot how fast I can get there from my home when nobody else is on the road.  On a weekday in rush hour traffic, that would have taken two hours to get there.  I gave myself 90 minutes, and actually got there in about 45.  Crazy! I made the mistake of going to the main Microsoft campus, but that’s not where the event was being held.  Instead it was in a big Microsoft conference center on the other side of the highway.  Fortunately, I had the address with me and quickly realized my mistake.  When I got back on track, I noticed that there were bright yellow signs out on the street corner that looked like they said they were for SOL Saturday, which actually was appropriate since it was the sunniest day around here in a long time. Since I was there so early, the registration was just getting setup, so I found Greg Larsen who was coordinating things and offered to help.  He put me to work with a group of people organizing the pre-printed raffle tickets and stuffing swag bags. I had never been to a SQLSaturday before this one, so I wasn’t exactly sure what to expect even though I have read about a few on some blogs.  It makes sense that each one will be a little bit different since they are almost completely volunteer driven, and the whole concept is still in its early stages.  I have been to the PASS Summit for the last several years, and was hoping for a smaller version of that.  Now, it’s not really fair to compare one free day of training run entirely by volunteers with a multi-day, $1,000+ event put on under the direction of a professional event management company.  But there are some parallels. At this SQLSaturday, there was no opening general session, just coffee and pastries in the common area / expo hallway and straight into the first group of sessions.  I don’t know if that was because there was no single room large enough to hold everyone, or for other reasons.  This worked out okay, but the organization guy in me would have preferred to have even a 15 minute welcome message from the organizers with a little overview of the day.  Even something as simple as, “Thanks to persons X, Y, and Z for helping put this together…Sessions will start in 20 minutes and are all in rooms down this hallway…the bathrooms are on the other side of the conference center…lunch today is pizza and we would like to thank sponsor Q for providing it.”  It doesn’t need to be much, certainly not a full-blown Keynote like at the PASS Summit, but something to use as a rallying point to pull everyone together and get the day off to an official start would be nice.  Again, there may have been logistical reasons why that was not feasible here.  I’m just putting out my thoughts for other SQLSaturday coordinators to consider. The event overall was great.  I believe that there were over 300 in attendance, and everything seemed to run smoothly.  At least from an attendee’s point of view where there was plenty of muffins in the morning and pizza in the afternoon, with plenty of pop to drink.  And hey, if you’ve got the food and drink covered, a lot of other stuff could go wrong and people will be very forgiving.  But as I said, everything appeared to run pretty smoothly, at least until Buck Woody showed up in his Oracle shirt.  Other than that, the volunteers did a great job! I was a little surprised by how few people in my own backyard that I know.  It makes sense if you really think about it, given how many companies must be using SQL Server around here.  I guess I just got spoiled coming into the PASS Summit with a few contacts that I already knew would be there.  Perhaps I have been spending too much time with too few people at the Summits and I need to step out and meet more folks.  Of course, it also is different since the Summit is the big national event and a number of the folks I know are spread out across the country, so the Summit is the only time we’re all in the same place at the same time.  I did make a few new contacts at SQLSaturday, and bumped into a couple of people that I knew (and a couple others that I only knew from Twitter, and didn’t even realize that they were here in the area). Other than the sheer entertainment value of Buck Woody’s session, the one that was probably the greatest value for me was a quick introduction to PowerShell.  I have not done anything with it yet, but I think it will be a good tool to use to implement my plans for automated database recovery testing.  I saw just enough at the session to take away some of the intimidation factor, and I am getting ready to jump in and see what I can put together in the next few weeks.  And that right there made the investment worthwhile.  So I encourage you, if you have the opportunity to go to a SQLSaturday event near you, go for it!

  Read the article

• Happy 3rd Birthday SilverlightCream!

  - by Dave Campbell

  Happy 3rd Birthday!     Yesterday (May 16) was the 'Birthday' of SilverlightCream, which started just after MIX in 2007 with a post "Interesting Silverlight posts today: Silverlight Control & Silverlight Pad". Too many good posts flying around led me to want to archive them, particularly since I was being aggregated at a new site Silverlight.net, and I could give some of that 'reach' to the community. Saturday's post was number 862, and as of that post, there were 5697 blog posts archived in the database all tagged up and searchable at SilverlightCream.com using the search page. The search needs to be better, and that's another discussion, but it does work. The blog didn't begin life as the SilverlightCream blog, as is obvious from the name, but once I realized people were following it closely, I've tried to keep the signal-to-noise ratio very high. I even secured another blog for when I just want to rant about something to keep that stuff out of this one :) If you've been around since MIX07 days you've heard all this, but after talking to some people at MIX10 I realized not everyone knows all the ways the information is presented, so I figured doing a post like this once a year probably isn't a bad idea :) I scrounge through an ever-growing list of blogs (right now sitting at 505) looking for good stuff. I try to spin through the list every day, but with the list growing that large, it's getting tough. I usually use it as a background task while working or watching TV. If I just sit and go through the blogs it takes about an hour. The list is long enough now that from time to time, I'll only get partway through it and have 10 to 13 entries, so I'll just stop there and go on the next day... I don't like to have more than 15 in any single post. It's all pattern recognition as in "seen that", "seen that", "that's new", etc... so if you're a blogger, look at a heading below for some comments about blogging from my perspective. When I see something new, I make sure you're not pulling a 'Mike Taulty' on me and dumping 6 or 8 new posts in one day :), and I tag the ones I want to review. If there's not a lot going on, I may just push the posts as I come across them. Some days there may be 60 posts in that 'to review' list! Some are non-Silverlight, some are essentially duplicates of others, some are demos, ads, new releases of something, session materials, etc. I push lots of material into a database at WynApse.com, and the "Tagged Posts" menu on the left sidebar there takes you to a tag cloud of (at this very moment) "9224 articles tagged 13915 different ways using 459 unique tags". There are links in there on Gibson guitars, Jazz Guitar instructional stuff, Ford F-250 links, and tons of technical and non-technical stuff I've been aggregating for about 5 years now. So when I decide to blog (or shoutout) something, I first push it into the database at WynApse.com. Then I tag it all up and push it into the database at SilverlightCream.com. Then it gets pushed to @SilverlightNews. For a little over a year now, we're tracking unique IP hits on posts launched from either the blog post or from one of the SilverlightCream.com pages, and the posts with top hits from unique IP addresses in the last 7 days are displayed in a 'Skim' page at SilverlightCream... and that page needs work as well. The Skim page and tracking was the brainchild of my buddy Michael Washington. What I blog/shoutout After some time doing posts, I decided there were things that probably have no need to be searchable, but are good information, so I post those as 'Shoutouts'. Eventually I also decided the Shoutouts should get posted to @SilverlightNews, and that's now taking place. Notes to bloggers Remember I said spinning throught the Big List-o-BlogsTM is pattern recognition... that means I don't spend a lot of time on any individual blog deciding if it has new content. If you're familiar with the term 'Above the Fold', then you're probably ok. If I have to scroll the page to see if there's something new, or wade through some maze of menus, I'm probably going to miss new stuff. Likewise if you only show the latest on the front page and make it a puzzle to find the rest of them, or if you make the titles and initial graphics almost identical to the previous article, I'll miss it. Another thing is name/brand-recognition. Far be it for me (WynApse) to comment on someone blogging with a pseudonym, but if you want to get get some recognition, you are going to want your name to be available somewhere. I can think right off the top of my head of a couple good blogs that I have no idea of the individuals' real names. I can pull that off a bit because I've been around so long almost everyone knows who I am, but if you're new to the blog-o-sphere, being able to be name-recognized is as important as getting your brand out there. Kick my tires Finally, stuff happens... I may hit the wrong key and delete your blog, or a post might slip past me and I not realize it's new because of the naming, and never blog it. If you think I missed something, send me an email or use the submit page at SilverlightCream.com. Some bloggers have figured out that if they submit (one way or another) to me, their posts will go out next. I try to honor anyone that takes the time to submit with a quicker 'Cream posting. Thanks! Finally, thanks to everyone that contributes to the community as a whole... the blogs, the videos, and the presentations. A special thanks to everyone that reads SilverlightCream, or follows @WynApse or @SilverlightNews. Keep it all coming, and... Stay in the 'Light

  Read the article

• SQL Server devs–what source control system do you use, if any? (answer and maybe win free stuff)

  - by jamiet

  Recently I noticed a tweet from notable SQL Server author and community dude-at-large Steve Jones in which he asked how many SQL Server developers were putting their SQL Server source code (i.e. DDL) under source control (I’m paraphrasing because I can’t remember the exact tweet and Twitter’s search functionality is useless). The question surprised me slightly as I thought a more pertinent question would be “how many SQL Server developers are not using source control?” because I have been doing just that for many years now and I simply assumed that use of source control is a given in this day and age. Then I started thinking about it. “Perhaps I’m wrong” I pondered, “perhaps the SQL Server folks that do use source control in their day-to-day jobs are in the minority”. So, dear reader, I’m interested to know a little bit more about your use of source control. Are you putting your SQL Server code into a source control system? If so, what source control server software (e.g. TFS, Git, SVN, Mercurial, SourceSafe, Perforce) are you using? What source control client software are you using (e.g. TFS Team Explorer, Tortoise, Red Gate SQL Source Control, Red Gate SQL Connect, Git Bash, etc…)? Why did you make those particular software choices? Any interesting anecdotes to share in regard to your use of source control and SQL Server? To encourage you to contribute I have five pairs of licenses for Red Gate SQL Source Control and Red Gate SQL Connect to give away to what I consider to be the five best replies (“best” is totally subjective of course but this is my blog so my decision is final ), if you want to be considered don’t forget to leave contact details; email address, Twitter handle or similar will do. To start you off and to perhaps get the brain cells whirring, here are my answers to the questions above: Are you putting your SQL Server code into a source control system? As I think I’ve already said…yes. Always. If so, what source control server software (e.g. TFS, Git, SVN, Mercurial, SourceSafe, Perforce) are you using? I move around a lot between many clients so it changes on a fairly regular basis; my current client uses Team Foundation Server (aka TFS) and as part of a separate project is trialing the use of Team Foundation Service. I have used SVN extensively in the past which I am a fan of (I generally prefer it to TFS) and am trying to get my head around Git by using it for ObjectStorageHelper. What source control client software are you using (e.g. TFS Team Explorer, Tortoise, Red Gate SQL Source Control, Red Gate SQL Connect, Git Bash, etc…)? On my current project, Team Explorer. In the past I have used Tortoise to connect to SVN. Why did you make those particular software choices? I generally use whatever the client uses and given that I work with SQL Server I find that the majority of my clients use TFS, I guess simply because they are Microsoft development shops. Any interesting anecdotes to share in regard to your use of source control and SQL Server? Not an anecdote as such but I am going to share some frustrations about TFS. In many ways TFS is a great product because it integrates many separate functions (source control, work item tracking, build agents) into one whole and I’m firmly of the opinion that that is a good thing if for no reason other than being able to associate your check-ins with a work-item. However, like many people there are aspects to TFS source control that annoy me day-in, day-out. Chief among them has to be the fact that it uses a file’s read-only property to determine if a file should be checked-out or not and, if it determines that it should, it will happily do that check-out on your behalf without you even asking it to. I didn’t realise how ridiculous this was until I first used SVN about three years ago – with SVN you make any changes you wish and then use your source control client to determine which files have changed and thus be checked-in; the notion of “check-out” doesn’t even exist. That sounds like a small thing but you don’t realise how liberating it is until you actually start working that way. Hoping to hear some more anecdotes and opinions in the comments. Remember….free software is up for grabs! @jamiet 

  Read the article

• Red Gate does Byte Night 2012

  - by red(at)work

  On the 5th of October 2012, a team of nine plucky Red Gaters braved the howling wind and the driving rain to sleep outside. No tents or mattresses were allowed – all we took for protection were sleeping bags, groundsheets, plastic sacks and Colin’s enormous fishing umbrella (a godsend in umbrella-y disguise). Why would we do such a thing? For Byte Night, an annual tech sector sleepout in support of Action for Children, who tackle the causes as well as the consequences of youth homelessness. Byte Night encourages technology professionals to do for one night a year what thousands of young people have to do every night – sleep rough.  We signed up for Byte Night in the warm, heady midst of the British summer, thinking it couldn’t possibly be all that bad. Even on the night itself – before the rain began to fall, sat in the comfort and warmth of a company canteen, drinking wine and eating chill and preparing to win the pub quiz – we were excited and optimistic about the night that lay ahead of us. All of that changed as soon as we stepped out into one of the worst rainstorms of the year. Brian, the team’s birthday boy, describes it best: Picture the scene: it’s 3 am on a Friday. I’m lying outside, fully clothed in a sleeping bag, wearing a raincoat, trussed up inside a large plastic pocket, on a ground sheet beneath a giant umbrella, wedged so tightly between two of my colleagues that I can’t move my arms. I’m wide awake, staring up at the grey sky beyond the edge of the umbrella; a limp, flickering white glow hints at a moon somewhere behind the drifting clouds. I haven’t slept since we first moved outside at 11 pm. Outside. Did I mention we were outside? I’m hung over. I need the loo. But there is no way on earth that I’m getting out of this sleeping bag. It’s cold. It’s raining. Not just raining, but chucking it down. It’s been doing this non-stop since 10pm. The rain sounds like a hyperactive drummer on the fishing umbrella, and the noise is loud and relentless. Puddles of water are forming all over the groundsheet, and, despite being ensconced inside the plastic pouch, I am wet. The fishing umbrella is protecting me from the worst of the driving rain, but not all of me is under it, and five hours of rain is no match for it. Everything is wet. My left side has become horribly damp. My trainers, which I placed next to my sleeping bag, are now completely soaked through. Mmm. That’ll be fun in the morning. My head is next to Colin’s head on one side, and a multi-pack of McCoy’s cheddar and onion crisps on the other. Don’t ask about the tub of hummus. That’s somewhere down by my ankles, abandoned to the night. Jess, who is lying next to me, rolls over onto her side. A mini waterfall cascades from her rain-pouch onto my face. Bah. I continue to stare into the heavens, willing the dawn to hurry up. Something lands on my face. It’s a mosquito. Great. Midnight, when this still seemed like fun – when we opened some champagne and my colleagues presented me with a caterpillar birthday cake, when everyone was drunk and jolly and full of stoic resolve – feels like a long time ago. Did I mention that today is my birthday? The remains of the caterpillar cake endure the same fate as the hummus, left out in the rain like a metaphor for sadness. It’s getting colder. I can see my breath. Silence has descended on the group, apart from the rustle of plastic. And the rain, obviously. Someone snores, and I envy whoever it is the sweet escape of sleep. I try to wriggle a bit further down inside my sleeping bag, but it doesn’t want to be wriggled into. Only 3 hours till dawn. 180 minutes. I begin to count them off, one at a time.  All nine of us got to go home in the morning, but thousands of children across the UK don’t have that luxury. If you’d like to sponsor the Red Gate Byte Night team, our JustGiving page can be found here.   Chris, before the outside bit actually happened. More photos from Byte Night Cambridge 2012 can be found here.

  Read the article

• Create a Social Community of Trust Along With Your Federal Digital Services Governance

  - by TedMcLaughlan

  The Digital Services Governance Recommendations were recently released, supporting the US Federal Government's Digital Government Strategy Milestone Action #4.2 to establish agency-wide governance structures for developing and delivering digital services. Figure 1 - From: "Digital Services Governance Recommendations" While extremely important from a policy and procedure perspective within an Agency's information management and communications enterprise, these recommendations only very lightly reference perhaps the most important success enabler - the "Trusted Community" required for ultimate usefulness of the services delivered. By "ultimate usefulness", I mean the collection of public, transparent properties around government information and digital services that include social trust and validation, social reach, expert respect, and comparative, standard measures of relative value. In other words, do the digital services meet expectations of the public, social media ecosystem (people AND machines)? A rigid governance framework, controlling by rules, policies and roles the creation and dissemination of digital services may meet the expectations of direct end-users and most stakeholders - including the agency information stewards and security officers. All others who may share comments about the services, write about them, swap or review extracts, repackage, visualize or otherwise repurpose the output for use in entirely unanticipated, social ways - these "stakeholders" will not be governed, but may observe guidance generated by a "Trusted Community". As recognized members of the trusted community, these stakeholders may ultimately define the right scope and detail of governance that all other users might observe, promoting and refining the usefulness of the government product as the social ecosystem expects. So, as part of an agency-centric governance framework, it's advised that a flexible governance model be created for stewarding a "Community of Trust" around the digital services. The first steps follow the approach outlined in the Recommendations: Step 1: Gather a Core Team In addition to the roles and responsibilities described, perhaps a set of characteristics and responsibilities can be developed for the "Trusted Community Steward/Advocate" - i.e. a person or team who (a) are entirely cognizant of and respected within the external social media communities, and (b) are trusted both within the agency and outside as practical, responsible, non-partisan communicators of useful information. The may seem like a standard Agency PR/Outreach team role - but often an agency or stakeholder subject matter expert with a public, active social persona works even better. Step 2: Assess What You Have In addition to existing, agency or stakeholder decision-making bodies and assets, it's important to take a PR/Marketing view of the social ecosystem. How visible are the services across the social channels utilized by current or desired constituents of your agency? What's the online reputation of your agency and perhaps the service(s)? Is Search Engine Optimization (SEO) a facet of external communications/publishing lifecycles? Who are the public champions, instigators, value-adders for the digital services, or perhaps just influential "communicators" (i.e. with no stake in the game)? You're essentially assessing your market and social presence, and identifying the actors (including your own agency employees) in the existing community of trust. Step 3: Determine What You Want The evolving Community of Trust will most readily absorb, support and provide feedback regarding "Core Principles" (Element B of the "six essential elements of a digital services governance structure") shared by your Agency, and obviously play a large, though probably very unstructured part in Element D "Stakeholder Input and Participation". Plan for this, and seek input from the social media community with respect to performance metrics - these should be geared around the outcome and growth of the trusted communities actions. How big and active is this community? What's the influential reach of this community with respect to particular messaging or campaigns generated by the Agency? What's the referral rate TO your digital services, FROM channels owned or operated by members of this community? (this requires governance with respect to content generation inclusive of "markers" or "tags"). At this point, while your Agency proceeds with steps 4 ("Build/Validate the Governance Structure") and 5 ("Share, Review, Upgrade"), the Community of Trust might as well just get going, and start adding value and usefulness to the existing conversations, existing data services - loosely though directionally-stewarded by your trusted advocate(s). Why is this an "Enterprise Architecture" topic? Because it's increasingly apparent that a Public Service "Enterprise" is not wholly contained within Agency facilities, firewalls and job titles - it's also manifested in actual, perceived or representative forms outside the walls, on the social Internet. An Agency's EA model and resulting investments both facilitate and are impacted by the "Social Enterprise". At Oracle, we're very active both within our Enterprise and outside, helping foster social architectures that enable truly useful public services, digital or otherwise.

  Read the article

• List of Commonly Used Value Types in XNA Games

  - by Michael B. McLaughlin

  Most XNA programmers are concerned about generating garbage. More specifically about allocating GC-managed memory (GC stands for “garbage collector” and is both the name of the class that provides access to the garbage collector and an acronym for the garbage collector (as a concept) itself). Two of the major target platforms for XNA (Windows Phone 7 and Xbox 360) use variants of the .NET Compact Framework. On both variants, the GC runs under various circumstances (Windows Phone 7 and Xbox 360). Of concern to XNA programmers is the fact that it runs automatically after a fixed amount of GC-managed memory has been allocated (currently 1MB on both systems). Many beginning XNA programmers are unaware of what constitutes GC-managed memory, though. So here’s a quick overview. In .NET, there are two different “types” of types: value types and reference types. Only reference types are managed by the garbage collector. Value types are not managed by the garbage collector and are instead managed in other ways that are implementation dependent. For purposes of XNA programming, the important point is that they are not managed by the GC and thus do not, by themselves, increment that internal 1 MB allocation counter. (n.b. Structs are value types. If you have a struct that has a reference type as a member, then that reference type, when instantiated, will still be allocated in the GC-managed memory and will thus count against the 1 MB allocation counter. Putting it in a struct doesn’t change the fact that it gets allocated on the GC heap, but the struct itself is created outside of the GC’s purview). Both value types and reference types use the keyword ‘new’ to allocate a new instance of them. Sometimes this keyword is hidden by a method which creates new instances for you, e.g. XmlReader.Create. But the important thing to determine is whether or not you are dealing with a value types or a reference type. If it’s a value type, you can use the ‘new’ keyword to allocate new instances of that type without incrementing the GC allocation counter (except as above where it’s a struct with a reference type in it that is allocated by the constructor, but there are no .NET Framework or XNA Framework value types that do this so it would have to be a struct you created or that was in some third-party library you were using for that to even become an issue). The following is a list of most all of value types you are likely to use in a generic XNA game: AudioCategory (used with XACT; not available on WP7) AvatarExpression (Xbox 360 only, but exposed on Windows to ease Xbox development) bool BoundingBox BoundingSphere byte char Color DateTime decimal double any enum (System.Enum itself is a class, but all enums are value types such that there are no GC allocations for enums) float GamePadButtons GamePadCapabilities GamePadDPad GamePadState GamePadThumbSticks GamePadTriggers GestureSample int IntPtr (rarely but occasionally used in XNA) KeyboardState long Matrix MouseState nullable structs (anytime you see, e.g. int? something, that ‘?’ denotes a nullable struct, also called a nullable type) Plane Point Quaternion Ray Rectangle RenderTargetBinding sbyte (though I’ve never seen it used since most people would just use a short) short TimeSpan TouchCollection TouchLocation TouchPanelCapabilities uint ulong ushort Vector2 Vector3 Vector4 VertexBufferBinding VertexElement VertexPositionColor VertexPositionColorTexture VertexPositionNormalTexture VertexPositionTexture Viewport So there you have it. That’s not quite a complete list, mind you. For example: There are various structs in the .NET framework you might make use of. I left out everything from the Microsoft.Xna.Framework.Graphics.PackedVector namespace, since everything in there ventures into the realm of advanced XNA programming anyway (n.b. every single instantiable thing in that namespace is a struct and thus a value type; there are also two interfaces but interfaces cannot be instantiated at all and thus don’t figure in to this discussion). There are so many enums you’re likely to use (PlayerIndex, SpriteSortMode, SpriteEffects, SurfaceFormat, etc.) that including them would’ve flooded the list and reduced its utility. So I went with “any enum” and trust that you can figure out what the enums are (and it’s rare to use ‘new’ with an enum anyway). That list also doesn’t include any of the pre-defined static instances of some of the classes (e.g. BlendState.AlphaBlend, BlendState.Opaque, etc.) which are already allocated such that using them doesn’t cause any new allocations and therefore doesn’t increase that 1 MB counter. That list also has a few misleading things. VertexElement, VertexPositionColor, and all the other vertex types are structs. But you’re only likely to ever use them as an array (for use with VertexBuffer or DynamicVertexBuffer), and all arrays are reference types (even arrays of value types such as VertexPositionColor[ ] or int[ ]). * So that’s it for now. The note below may be a bit confusing (it deals with how the GC works and how arrays are managed in .NET). If so, you can probably safely ignore it for now but feel free to ask any questions regardless. * Arrays of value types (where the value type doesn’t contain any reference type members) are much faster for the GC to examine than arrays of reference types, so there is a definite benefit to using arrays of value types where it makes sense. But creating arrays of value types does cause the GC’s allocation counter to increase. Indeed, allocating a large array of a value type is one of the quickest ways to increment the allocation counter since a .NET array is a sequential block of memory. An array of reference types is just a sequential block of references (typically 4 bytes each) while an array of value types is a sequential block of instances of that type. So for an array of Vector3s it would be 12 bytes each since each float is 4 bytes and there are 3 in a Vector3; for an array of VertexPositionNormalTexture structs it would typically be 32 bytes each since it has two Vector3s and a Vector2. (Note that there are a few additional bytes taken up in the creation of an array, typically 12 but sometimes 16 or possibly even more, which depend on the implementation details of the array type on the particular platform the code is running on).

  Read the article

• How to Answer a Stupid Interview Question the Right Way

  - by AjarnMark

  Have you ever been asked a stupid question during an interview; one that seemed to have no relation to the job responsibilities at all?  Tech people are often caught off-guard by these apparently irrelevant questions, but there is a way you can turn these to your favor.  Here is one idea. While chatting with a couple of folks between sessions at SQLSaturday 43 last weekend, one of them expressed frustration over a seemingly ridiculous and trivial question that she was asked during an interview, and she believes it cost her the job opportunity.  The question, as I remember it being described was, “What is the largest byte measurement?”.  The candidate made up a guess (“zetabyte”) during the interview, which is actually closer than she may have realized.  According to Wikipedia, there is a measurement known as zettabyte which is 10^21, and the largest one listed there is yottabyte at 10^24. My first reaction to this question was, “That’s just a hiring manager that doesn’t really know what they’re looking for in a candidate.  Furthermore, this tells me that this manager really does not understand how to build a team.”  In most companies, team interaction is more important than uber-knowledge.  I didn’t ask, but this could also be another geek on the team trying to establish their Alpha-Geek stature.  I suppose that there are a few, very few, companies that can build their businesses on hiring only the extreme alpha-geeks, but that certainly does not represent the majority of businesses in America. My friend who was there suggested that the appropriate response to this silly question would be, “And how does this apply to the work I will be doing?” Of course this is an understandable response when you’re frustrated because you know you can handle the technical aspects of the job, and it seems like the interviewer is just being silly.  But it is also a direct challenge, which may not be the best approach in interviewing.  I do have to admit, though, that there are those folks who just won’t respect you until you do challenge them, but again, I don’t think that is the majority. So after some thought, here is my suggestion: “Well, I know that there are petabytes and exabytes and things even larger than that, but I haven’t been keeping up on my list of Greek prefixes that have not yet been used, so I would have to look up the exact answer if you need it.  However, I have worked with databases as large as 30 Terabytes.  How big are the largest databases here at X Corporation?”  Perhaps with a follow-up of, “Typically, what I have seen in companies that have databases of your size, is that the three biggest challenges they face are: A, B, and C.  What would you say are the top 3 concerns that you would like the person you hire to be able to address?…Here is how I have dealt with those concerns in the past (or ‘Here is how I would tackle those issues for you…’).” Wait! What just happened?!  We took a seemingly irrelevant and frustrating question and turned it around into an opportunity to highlight our relevant skills and guide the conversation back in a direction more to our liking and benefit.  In more generic terms, here is what we did: Admit that you don’t know the specific answer off the top of your head, but can get it if it’s truly important to the company. Maybe for some reason it really is important to them. Mention something similar or related that you do know, reassuring them that you do have some knowledge in that subject area. Draw a parallel to your past work experience. Ask follow-up questions about the company’s specific needs and discuss how you can fulfill those. This type of thing requires practice and some forethought.  I didn’t come up with this answer until a day later, which is too late when you’re interviewing.  I still think it is silly for an interviewer to ask something like that, but at least this is one way to spin it to your advantage while you consider whether you really want to work for someone who would ask a thing like that.  Remember, interviewing is a two-way process.  You’re deciding whether you want to work there just as much as they are deciding whether they want you. There is always the possibility that this was a calculated maneuver on the part of the hiring manager just to see how quickly you think on your feet and how you handle stupid questions.  Maybe he knows something about the work environment and he’s trying to gauge whether you’ll actually fit in okay.  And if that’s the case, then the above response still works quite well.

  Read the article

• SQLAuthority News – #TechEdIn – TechEd India 2012 Memories and Photos

  - by pinaldave

  TechEd India 2012 was held in Bangalore last March 21 to 23, 2012. Just like every year, this event is bigger, grander and inspiring. Pinal Dave at TechEd India 2012 Family Event Every single year, TechEd is a special affair for my entire family.  Four months before the start of TechEd, I usually start to build the mental image of the event. I start to think  about various things. For the most part, what excites me most is presenting a session and meeting friends. Seriously, I start thinking about presenting my session 4 months earlier than the event!  I work on my presentation day and night. I want to make sure that what I present is accurate and that I have experienced it firsthand. My wife and my daughter also contribute to my efforts. For us, TechEd is a family event, and the two of them feel equally responsible as well. They give up their family time so I can bring out the best content for the Community. Pinal, Shaivi and Nupur at TechEd India 2012 Guinea Pigs (My Experiment Victims) I do not rehearse my session, ever. However, I test my demo almost every single day till the last moment that I have to present it already. I sometimes go over the demo more than 2-3 times a day even though the event is more than a month away. I have two “guinea pigs”: 1) Nupur Dave and 2) Vinod Kumar. When I am at home, I present my demos to my wife Nupur. At times I feel that people often backup their demo, but in my case, I have backup demo presenters. In the office during lunch time, I present the demos to Vinod. I am sure he can walk my demos easily with eyes closed. Pinal and Vinod at TechEd India 2012 My Sessions I’ve been determined to present my sessions in a real and practical manner. I prefer to present the subject that I myself would be eager to attend to and sit through if I were an audience. Just keeping that principle in mind, I have created two sessions this year. SQL Server Misconception and Resolution Pinal and Vinod at TechEd India 2012 We believe all kinds of stuff – that the earth is flat, or that the forbidden fruit is apple, or that the big bang theory explains the origin of the universe, and so many other things. Just like these, we have plenty of misconceptions in SQL Server as well. I have had this dream of co-presenting a session with Vinod Kumar for the past 3 years. I have been asking him every year if we could present a session together, but we never got it to work out, until this year came. Fortunately, we got a chance to stand on the same stage and present a single subject.  I believe that Vinod Kumar and I have an excellent synergy when we are working together. We know each other’s strengths and weakness. We know when the other person will speak and when he will keep quiet. The reason behind this synergy is that we have worked on 2 Video Learning Courses (SQL Server Indexes and SQL Server Questions and Answers) and authored 1 book (SQL Server Questions and Answers) together. Crowd Outside Session Hall This session was inspired from the “Laurel and Hardy” show so we performed a role-playing of those famous characters. We had an excellent time at the stage and, for sure, the audience had a wonderful time, too. We had an extremely large audience for this session and had a great time interacting with them. Speed Up! – Parallel Processes and Unparalleled Performance Pinal Dave at TechEd India 2012 I wanted to approach this session at level 400 and I was very determined to do so. The biggest challenge I had was that this was a total of 60 minutes of session and the audience profile was very generic. I had to present at level 100 as well at 400. I worked hard to tune up these demos. I wanted to make sure that my messages would land perfectly to the minds of the attendees, and when they walk out of the session, they could use the knowledge I shared on their servers. After the session, I felt an extreme satisfaction as I received lots of positive feedback at the event. At one point, so many people rushed towards me that I was a bit scared that the stage might break and someone would get injured. Fortunately, nothing like that happened and I was able to shake hands with everybody. Pinal Dave at TechEd India 2012 Crowd rushing to Pinal at TechEd India 2012 Networking This is one of the primary reasons many of us visit the annual TechEd event. I had a fantastic time meeting SQL Server enthusiasts. Well, it was a terrific time meeting old friends, user group members, MVPs and SQL Enthusiasts. I have taken many photographs with lots of people, but I have received a very few back. If you are reading this blog and have a photo of us at the event, would you please send it to me so I could keep it in my memory lane? SQL Track Speaker: Jacob and Pinal at TechEd India 2012 SQL Community: Pinal, Tejas, Nakul, Jacob, Balmukund, Manas, Sudeepta, Sahal at TechEd India 2012 Star Speakers: Amit and Balmukund at TechEd India 2012 TechED Rockstars: Nakul, Tejas and Pinal at TechEd India 2012 I guess TechEd is a mix of family affair and culture for me! Hamara TechEd (Our TechEd) Please tell me which photo you like the most! Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, SQLAuthority News, SQLServer, T SQL, Technology Tagged: TechEd, TechEdIn

  Read the article

• Big Data – Operational Databases Supporting Big Data – RDBMS and NoSQL – Day 12 of 21

  - by Pinal Dave

  In yesterday’s blog post we learned the importance of the Cloud in the Big Data Story. In this article we will understand the role of Operational Databases Supporting Big Data Story. Even though we keep on talking about Big Data architecture, it is extremely crucial to understand that Big Data system can’t just exist in the isolation of itself. There are many needs of the business can only be fully filled with the help of the operational databases. Just having a system which can analysis big data may not solve every single data problem. Real World Example Think about this way, you are using Facebook and you have just updated your information about the current relationship status. In the next few seconds the same information is also reflected in the timeline of your partner as well as a few of the immediate friends. After a while you will notice that the same information is now also available to your remote friends. Later on when someone searches for all the relationship changes with their friends your change of the relationship will also show up in the same list. Now here is the question – do you think Big Data architecture is doing every single of these changes? Do you think that the immediate reflection of your relationship changes with your family member is also because of the technology used in Big Data. Actually the answer is Facebook uses MySQL to do various updates in the timeline as well as various events we do on their homepage. It is really difficult to part from the operational databases in any real world business. Now we will see a few of the examples of the operational databases. Relational Databases (This blog post) NoSQL Databases (This blog post) Key-Value Pair Databases (Tomorrow’s post) Document Databases (Tomorrow’s post) Columnar Databases (The Day After’s post) Graph Databases (The Day After’s post) Spatial Databases (The Day After’s post) Relational Databases We have earlier discussed about the RDBMS role in the Big Data’s story in detail so we will not cover it extensively over here. Relational Database is pretty much everywhere in most of the businesses which are here for many years. The importance and existence of the relational database are always going to be there as long as there are meaningful structured data around. There are many different kinds of relational databases for example Oracle, SQL Server, MySQL and many others. If you are looking for Open Source and widely accepted database, I suggest to try MySQL as that has been very popular in the last few years. I also suggest you to try out PostgreSQL as well. Besides many other essential qualities PostgreeSQL have very interesting licensing policies. PostgreSQL licenses allow modifications and distribution of the application in open or closed (source) form. One can make any modifications and can keep it private as well as well contribute to the community. I believe this one quality makes it much more interesting to use as well it will play very important role in future. Nonrelational Databases (NOSQL) We have also covered Nonrelational Dabases in earlier blog posts. NoSQL actually stands for Not Only SQL Databases. There are plenty of NoSQL databases out in the market and selecting the right one is always very challenging. Here are few of the properties which are very essential to consider when selecting the right NoSQL database for operational purpose. Data and Query Model Persistence of Data and Design Eventual Consistency Scalability Though above all of the properties are interesting to have in any NoSQL database but the one which most attracts to me is Eventual Consistency. Eventual Consistency RDBMS uses ACID (Atomicity, Consistency, Isolation, Durability) as a key mechanism for ensuring the data consistency, whereas NonRelational DBMS uses BASE for the same purpose. Base stands for Basically Available, Soft state and Eventual consistency. Eventual consistency is widely deployed in distributed systems. It is a consistency model used in distributed computing which expects unexpected often. In large distributed system, there are always various nodes joining and various nodes being removed as they are often using commodity servers. This happens either intentionally or accidentally. Even though one or more nodes are down, it is expected that entire system still functions normally. Applications should be able to do various updates as well as retrieval of the data successfully without any issue. Additionally, this also means that system is expected to return the same updated data anytime from all the functioning nodes. Irrespective of when any node is joining the system, if it is marked to hold some data it should contain the same updated data eventually. As per Wikipedia - Eventual consistency is a consistency model used in distributed computing that informally guarantees that, if no new updates are made to a given data item, eventually all accesses to that item will return the last updated value. In other words -  Informally, if no additional updates are made to a given data item, all reads to that item will eventually return the same value. Tomorrow In tomorrow’s blog post we will discuss about various other Operational Databases supporting Big Data. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

  Read the article

• User Productivity Kit - Powerful Packages (Part 2)

  - by [email protected]

  In my first post on packages I described what a package is and how it can be used. I also started explaining some of the considerations that should be taken into account when determining how to arrange your packages. The first is when the files are interrelated and depend on one another such as an HTML file and it's graphics. A second consideration is how the files are used in your outlines. Let's say you're using a dozen Word doc files. You could place them all in a single package or put each Word doc file in a separate package but what's the right thing to do? There are several factors that will influence your decision. To understand the first, let me explain a function of UPK publishing. Take an outline in UPK that has an attachment (concept, frame link, or hyperlink) that points to a file in a package. When you publish this outline, the publishing engine will determine that there is a link to a file in the package and copy the contents of the package to the publishing destination directory. This is done to ensure that any interrelated files are kept together. For the situation where you have an HTML file with links to number of graphics files, this is a good thing. If, however, the package has a dozen unrelated Word doc files and you link to only one of them, all dozen Word documents will be copied to the publishing destination directory.  Whether or not this is a good thing is dependent on two things. First, are all of the files in the package used in the outline that you're publishing? Take an outline that includes links to all of the Word documents in that dozen document package I described earlier. For this situation, you may choose to keep all the files in a single package for convenience. A second consideration is how your organization leverages reuse in UPK. In this context, I'm referring to the link style of reuse such as when you link to the same topic from multiple UPK outlines and changes to the topic appear in both places. Take an example where you have the earlier mentioned dozen Word document package and an outline with a dozen topics in it. Each topic has an attachment pointing to one of the Word documents in the package (frame link, concept, etc.) If you're only publishing this outline, the single package probably works fine but what if you're reusing one of these topics in another outline? As I explained earlier, linking to one file in the package will result in all files in the package being copied to your published output. In this example, linking to one topic in the first outline will result in all dozen Word documents being copied to the published output. This may result in files in the output that you don't want there for business or size reasons. This is a situation in which you should consider placing each of the Word documents in it's own separate package. With each document in it's own package, that link to a single document will result in only that single package and single Word document being copied to the published output. In my last post I had described that packages are documents in the UPK library. When using the multi-user version of the UPK Developer you can leverage standard library capabilities for managing the files in these packages during the development process - capabilities such as check in / check out, history, etc. When structuring your packages take into consideration how the authors are going to be adding, modifying and deleting files from the packages. A single package is a single document in the UPK library. Like any other document in the library, a single user can check out the package and edit it at a time. If you have a large number of files in a single package and these must be modified by many users, you need to consider whether this will cause problems as multiple users compete to update the same package. If the files don't depend on each other consider placing the files in separate packages to reduce contention. I hope you've enjoyed these two posts on how you can leverage the power of packages in your content. In summary, consider the following when structuring your packages: Is the asset a single, standalone file or a set of files that depend on each other? Will all the files always be used together in a single outline or may only some of the files be needed based on how the content is reused across multiple outlines? Will multiple developers need to update the files in a single package or should you break it into multiple packages to reduce contention when checking out the document? We'd like to hear from you on how you're using packages in your content. Please add your comments below! Thank you and I hope these two posts have given you additional insights into how to use packages in your content and structure them for efficient use. John Zaums Senior Director, Product Development Oracle User Productivity Kit

  Read the article

• Tuning Red Gate: #4 of Some

  - by Grant Fritchey

  First time connecting to these servers directly (keys to the kingdom, bwa-ha-ha-ha. oh, excuse me), so I'm going to take a look at the server properties, just to see if there are any issues there. Max memory is set, cool, first possible silly mistake clear. In fact, these look to be nicely set up. Oh, I'd like to see the ANSI Standards set by default, but it's not a big deal. The default location for database data is the F:\ drive, where I saw all the activity last time. Cool, the people maintaining the servers in our company listen, parallelism threshold is set to 35 and optimize for ad hoc is enabled. No shocks, no surprises. The basic setup is appropriate. On to the problem database. Nothing wrong in the properties. The database is in SIMPLE recovery, but I think it's a reporting system, so no worries there. Again, I'd prefer to see the ANSI settings for connections, but that's the worst thing I can see. Time to look at the queries, tables, indexes and statistics because all the information I've collected over the last several days suggests that we're not looking at a systemic problem (except possibly not enough memory), but at the traditional tuning issues. I just want to note that, I started looking at the system, not the queries. So should you when tuning your environment. I know, from the data collected through SQL Monitor, what my top poor performing queries are, and the most frequently called, etc. I'm starting with the most frequently called. I'm going to get the execution plan for this thing out of the cache (although, with the cache dumping constantly, I might not get it). And it's not there. Called 1.3 million times over the last 3 days, but it's not in cache. Wow. OK. I'll see what's in cache for this database: SELECT  deqs.creation_time,         deqs.execution_count,         deqs.max_logical_reads,         deqs.max_elapsed_time,         deqs.total_logical_reads,         deqs.total_elapsed_time,         deqp.query_plan,         SUBSTRING(dest.text, (deqs.statement_start_offset / 2) + 1,                   (deqs.statement_end_offset - deqs.statement_start_offset) / 2                   + 1) AS QueryStatement FROM    sys.dm_exec_query_stats AS deqs         CROSS APPLY sys.dm_exec_sql_text(deqs.sql_handle) AS dest         CROSS APPLY sys.dm_exec_query_plan(deqs.plan_handle) AS deqp WHERE   dest.dbid = DB_ID('Warehouse') AND deqs.statement_end_offset > 0 AND deqs.statement_start_offset > 0 ORDER BY deqs.max_logical_reads DESC ; And looking at the most expensive operation, we have our first bad boy: Multiple table scans against very large sets of data and a sort operation. a sort operation? It's an insert. Oh, I see, the table is a heap, so it's doing an insert, then sorting the data and then inserting into the primary key. First question, why isn't this a clustered index? Let's look at some more of the queries. The next one is deceiving. Here's the query plan: You're thinking to yourself, what's the big deal? Well, what if I told you that this thing had 8036318 reads? I know, you're looking at skinny little pipes. Know why? Table variable. Estimated number of rows = 1. Actual number of rows. well, I'm betting several more than one considering it's read 8 MILLION pages off the disk in a single execution. We have a serious and real tuning candidate. Oh, and I missed this, it's loading the table variable from a user defined function. Let me check, let me check. YES! A multi-statement table valued user defined function. And another tuning opportunity. This one's a beauty, seriously. Did I also mention that they're doing a hash against all the columns in the physical table. I'm sure that won't lead to scans of a 500,000 row table, no, not at all. OK. I lied. Of course it is. At least it's on the top part of the Loop which means the scan is only executed once. I just did a cursory check on the next several poor performers. all calling the UDF. I think I found a big tuning opportunity. At this point, I'm typing up internal emails for the company. Someone just had their baby called ugly. In addition to a series of suggested changes that we need to implement, I'm also apologizing for being such an unkind monster as to question whether that third eye & those flippers belong on such an otherwise lovely child.

  Read the article

• Online Password Security Tactics

  - by BuckWoody

  Recently two more large databases were attacked and compromised, one at the popular Gawker Media sites and the other at McDonald’s. Every time this kind of thing happens (which is FAR too often) it should remind the technical professional to ensure that they secure their systems correctly. If you write software that stores passwords, it should be heavily encrypted, and not human-readable in any storage. I advocate a different store for the login and password, so that if one is compromised, the other is not. I also advocate that you set a bit flag when a user changes their password, and send out a reminder to change passwords if that bit isn’t changed every three or six months.    But this post is about the *other* side – what to do to secure your own passwords, especially those you use online, either in a cloud service or at a provider. While you’re not in control of these breaches, there are some things you can do to help protect yourself. Most of these are obvious, but they contain a few little twists that make the process easier.   Use Complex Passwords This is easily stated, and probably one of the most un-heeded piece of advice. There are three main concepts here: ·         Don’t use a dictionary-based word ·         Use mixed case ·         Use punctuation, special characters and so on   So this: password Isn’t nearly as safe as this: P@ssw03d   Of course, this only helps if the site that stores your password encrypts it. Gawker does, so theoretically if you had the second password you’re in better shape, at least, than the first. Dictionary words are quickly broken, regardless of the encryption, so the more unusual characters you use, and the farther away from the dictionary words you get, the better.   Of course, this doesn’t help, not even a little, if the site stores the passwords in clear text, or the key to their encryption is broken. In that case…   Use a Different Password at Every Site What? I have hundreds of sites! Are you kidding me? Nope – I’m not. If you use the same password at every site, when a site gets attacked, the attacker will store your name and password value for attacks at other sites. So the only safe thing to do is to use different names or passwords (or both) at each site. Of course, most sites use your e-mail as a username, so you’re kind of hosed there. So even though you have hundreds of sites you visit, you need to have at least a different password at each site.   But it’s easier than you think – if you use an algorithm.   What I’m describing is to pick a “root” password, and then modify that based on the site or purpose. That way, if the site is compromised, you can still use that root password for the other sites.   Let’s take that second password: P@ssw03d   And now you can append, prepend or intersperse that password with other characters to make it unique to the site. That way you can easily remember the root password, but make it unique to the site. For instance, perhaps you read a lot of information on Gawker – how about these:   P@ssw03dRead ReadP@ssw03d PR@esasdw03d   If you have lots of sites, tracking even this can be difficult, so I recommend you use password software such as Password Safe or some other tool to have a secure database of your passwords at each site. DO NOT store this on the web. DO NOT use an Office document (Microsoft or otherwise) that is “encrypted” – the encryption office automation packages use is very trivial, and easily broken. A quick web search for tools to do that should show you how bad a choice this is.   Change Your Password on a Schedule I know. It’s a real pain. And it doesn’t seem worth it…until your account gets hacked. A quick note here – whenever a site gets hacked (and I find out about it) I change the password at that site immediately (or quit doing business with them) and then change the root password on every site, as quickly as I can.   If you follow the tip above, it’s not as hard. Just add another number, year, month, day, something like that into the mix. It’s not unlike making a Primary Key in an RDBMS.   P@ssw03dRead10242010   Change the site, and then update your password database. I do this about once a month, on the first or last day, during staff meetings. (J)   If you have other tips, post them here. We can all learn from each other on this.

  Read the article

• SQL SERVER – Weekly Series – Memory Lane – #006

  - by pinaldave

  Here is the list of selected articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2006 This was my very first year of blogging so I was every day learning something new. As I have said many times, that blogging was never an intention. I had really not understood what exactly I am working on or beginning when I was beginning blogging in 2006. I had never knew that my life was going to change forever, once I started blogging. When I look back all of this year, I am happy that we are here together. 2007 IT Outsourcing to India – Top 10 Reasons Companies Outsource Outsourcing is about trust, collaboration and success. Helping other countries in need has been always the course of mankind, outsourcing is nothing different then that. With information technology and process improvements increasing the complexity, costs and skills required to accomplish routine tasks as well as challenging complex tasks, companies are outsourcing such tasks to providers who have the expertise to perform them at lower costs , with greater value and quality outcome. UDF – Remove Duplicate Chars From String This was a very interesting function I wrote in my early career. I am still using this function when I have to remove duplicate chars from strings. I have yet to come across a scenario where it does not work so I keep on using it till today. Please leave a comment if there is any better solution to this problem. FIX : Error : 3702 Cannot drop database because it is currently in use This is a very generic error when DROP Database is command is executed and the database is not dropped. The common mistake user is kept the connection open with this database and trying to drop the database. The database cannot be dropped if there is any other connection open along with it. It is always a good idea to take database in single user mode before dropping it. Here is the quick tutorial regarding how to bring the database in single user mode: Using T-SQL | Using SSMS. 2008 Install SQL Server 2008 – How to Upgrade to SQL Server 2008 – Installation Tutorial This was indeed one of the most popular articles in SQL Server 2008. Lots of people wanted to learn how to install SQL SErver 2008 but they were facing various issues while installation. I build this tutorial which becomes reference points for many. Default Collation of SQL Server 2008 What is the collation of SQL Server 2008 default installations? I often see this question confusing many experienced developers as well. Well the answer is in following image. Ahmedabad SQL Server User Group Meeting – November 2008 User group meetings are fun, now a days I am going to User Group meetings every week but there was a case when I have been just a beginner on this subject. The bug of the community was caught on me years ago when I started to present in Ahmedabad and Gandhinagar SQ LServer User Groups. 2009 Validate an XML document in TSQL using XSD My friend Jacob Sebastian wrote an excellent article on the subject XML and XSD. Because of the ‘eXtensible’ nature of XML (eXtensible Markup Language), often there is a requirement to restrict and validate the content of an XML document to a pre-defined structure and values. XSD (XML Schema Definition Language) is the W3C recommended language for describing and validating XML documents. SQL Server implements XSD as XML Schema Collections. Star Join Query Optimization At present, when queries are sent to very large databases, millions of rows are returned. Also the users have to go through extended query response times when joining multiple tables are involved with such queries. ‘Star Join Query Optimization’ is a new feature of SQL Server 2008 Enterprise Edition. This mechanism uses bitmap filtering for improving the performance of some types of queries by the effective retrieval of rows from fact tables. 2010 These puzzles are very interesting and intriguing – there was lots of interest on this subject. If you have free time this weekend. You may want to try them out. SQL SERVER – Challenge – Puzzle – Usage of FAST Hint (Solution)  SQL SERVER – Puzzle – Challenge – Error While Converting Money to Decimal (Solution)  SQL SERVER – Challenge – Puzzle – Why does RIGHT JOIN Exists (Open)  Additionally, I had great fun presenting SQL Server Performance Tuning seminar at fantastic locations in Hyderabad. Installing AdventeWorks Database This has been the most popular request I have received on my blog. Here is the quick video about how one can install AdventureWorks. 2011 Effect of SET NOCOUNT on @@ROWCOUNT There was an interesting incident once while I was presenting a session. I wrote a code and suddenly 10 hands went up in the air.  This was a bit surprise to me as I do not know why they all got alerted. I assumed that there should be something wrong with either project, screen or my display. However the real reason was very interesting – I suggest you read the complete blog post to understand this interesting scenario. Error: Deleting Offline Database and Creating the Same Name This is very interesting because once a user deletes the offline database the MDF and LDF file still exists and if the user attempts to create a new database with the same name it will give error. I found this very interesting and the blog explains the concept very quickly. Have you ever faced a similar situation? Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• How to Secure a Data Role by Multiple Business Units

  - by Elie Wazen

  In this post we will see how a Role can be data secured by multiple Business Units (BUs).  Separate Data Roles are generally created for each BU if a corresponding data template generates roles on the basis of the BU dimension. The advantage of creating a policy with a rule that includes multiple BUs is that while mapping these roles in HCM Role Provisioning Rules, fewer number of entires need to be made. This could facilitate maintenance for enterprises with a large number of Business Units. Note: The example below applies as well if the securing entity is Inventory Organization. Let us take for example the case of a user provisioned with the "Accounts Payable Manager - Vision Operations" Data Role in Fusion Applications. This user will be able to access Invoices in Vision Operations but will not be able to see Invoices in Vision Germany. Figure 1. A User with a Data Role restricting them to Data from BU: Vision Operations With the role granted above, this is what the user will see when they attempt to select Business Units while searching for AP Invoices. Figure 2.The List Of Values of Business Units is limited to single one. This is the effect of the Data Role granted to that user as can be seen in Figure 1 In order to create a data role that secures by multiple BUs,  we need to start by creating a condition that groups those Business Units we want to include in that data role. This is accomplished by creating a new condition against the BU View .  That Condition will later be used to create a data policy for our newly created Role.  The BU View is a Database resource and  is accessed from APM as seen in the search below Figure 3.Viewing a Database Resource in APM The next step is create a new condition,  in which we define a sql predicate that includes 2 BUs ( The ids below refer to Vision Operations and Vision Germany).  At this point we have simply created a standalone condition.  We have not used this condition yet, and security is therefore not affected. Figure 4. Custom Role that inherits the Purchase Order Overview Duty We are now ready to create our Data Policy.  in APM, we search for our newly Created Role and Navigate to “Find Global Policies”.  we query the Role we want to secure and navigate to view its global policies. Figure 5. The Job Role we plan on securing We can see that the role was not defined with a Data Policy . So will create one that uses the condition we created earlier.   Figure 6. Creating a New Data Policy In the General Information tab, we have to specify the DB Resource that the Security Policy applies to:  In our case this is the BU View Figure 7. Data Policy Definition - Selection of the DB Resource we will secure by In the Rules Tab, we  make the rule applicable to multiple values of the DB Resource we selected in the previous tab.  This is where we associate the condition we created against the BU view to this data policy by entering the Condition name in the Condition field Figure 8. Data Policy Rule The last step of Defining the Data Policy, consists of  explicitly selecting  the Actions that are goverened by this Data Policy.  In this case for example we select the Actions displayed below in the right pane. Once the record is saved , we are ready to use our newly secured Data Role. Figure 9. Data Policy Actions We can now see a new Data Policy associated with our Role.  Figure 10. Role is now secured by a Data Policy We now Assign that new Role to the User.  Of course this does not have to be done in OIM and can be done using a Provisioning Rule in HCM. Figure 11. Role assigned to the User who previously was granted the Vision Ops secured role. Once that user accesses the Invoices Workarea this is what they see: In the image below the LOV of Business Unit returns the two values defined in our data policy namely: Vision Operations and Vision Germany Figure 12. The List Of Values of Business Units now includes the two we included in our data policy. This is the effect of the data role granted to that user as can be seen in Figure 11

  Read the article

• Memory Efficient Windows SOA Server

  - by Antony Reynolds

  Installing a Memory Efficient SOA Suite 11.1.1.6 on Windows Server Well 11.1.1.6 is now available for download so I thought I would build a Windows Server environment to run it.  I will minimize the memory footprint of the installation by putting all functionality into the Admin Server of the SOA Suite domain. Required Software 64-bit JDK SOA Suite If you want 64-bit then choose “Generic” rather than “Microsoft Windows 32bit JVM” or “Linux 32bit JVM” This has links to all the required software. If you choose “Generic” then the Repository Creation Utility link does not show, you still need this so change the platform to “Microsoft Windows 32bit JVM” or “Linux 32bit JVM” to get the software. Similarly if you need a database then you need to change the platform to get the link to XE for Windows or Linux. If possible I recommend installing a 64-bit JDK as this allows you to assign more memory to individual JVMs. Windows XE will work, but it is better if you can use a full Oracle database because of the limitations on XE that sometimes cause it to run out of space with large or multiple SOA deployments. Installation Steps The following flow chart outlines the steps required in installing and configuring SOA Suite. The steps in the diagram are explained below. 64-bit? Is a 64-bit installation required?  The Windows & Linux installers will install 32-bit versions of the Sun JDK and JRockit.  A separate JDK must be installed for 64-bit. Install 64-bit JDK The 64-bit JDK can be either Hotspot or JRockit.  You can choose either JDK 1.7 or 1.6. Install WebLogic If you are using 64-bit then install WebLogic using “java –jar wls1036_generic.jar”.  Make sure you include Coherence in the installation, the easiest way to do this is to accept the “Typical” installation. SOA Suite Required? If you are not installing SOA Suite then you can jump straight ahead and create a WebLogic domain. Install SOA Suite Run the SOA Suite installer and point it at the existing Middleware Home created for WebLogic.  Note to run the SOA installer on Windows the user must have admin privileges.  I also found that on Windows Server 2008R2 I had to start the installer from a command prompt with administrative privileges, granting it privileges when it ran caused it to ignore the jreLoc parameter. Database Available? Do you have access to a database into which you can install the SOA schema.  SOA Suite requires access to an Oracle database (it is supported on other databases but I would always use an oracle database). Install Database I use an 11gR2 Oracle database to avoid XE limitations.  Make sure that you set the database character set to be unicode (AL32UTF8).  I also disabled the new security settings because they get in the way for a developer database.  Don’t forget to check that number of processes is at least 150 and number of sessions is not set, or is set to at least 200 (in the DB init parameters). Run RCU The SOA Suite database schemas are created by running the Repository Creation Utility.  Install the “SOA and BPM Infrastructure” component to support SOA Suite.  If you keep the schema prefix as “DEV” then the config wizard is easier to complete. Run Config Wizard The Config wizard creates the domain which hosts the WebLogic server instances.  To get a minimum footprint SOA installation choose the “Oracle Enterprise Manager” and “Oracle SOA Suite for developers” products.  All other required products will be automatically selected. The “for developers” installs target the appropriate components at the AdminServer rather than creating a separate managed server to house them.  This reduces the number of JVMs required to run the system and hence the amount of memory required.  This is not suitable for anything other than a developer environment as it mixes the admin and runtime functions together in a single server.  It also takes a long time to load all the required modules, making start up a slow process. If it exists I would recommend running the config wizard found in the “oracle_common/common/bin” directory under the middleware home.  This should have access to all the templates, including SOA. If you also want to run BAM in the same JVM as everything else then you need to “Select Optional Configuration” for “Managed Servers, Clusters and Machines”. To target BAM at the AdminServer delete the “bam_server1” managed server that is created by default.  This will result in BAM being targeted at the AdminServer. Installation Issues I had a few problems when I came to test everything in my mega-JVM. Following applications were not targeted and so I needed to target them at the AdminServer: b2bui composer Healthcare UI FMW Welcome Page Application (11.1.0.0.0) How Memory Efficient is It? On a Windows 2008R2 Server running under VirtualBox I was able to bring up both the 11gR2 database and SOA/BPM/BAM in 3G memory.  I allocated a minimum 512M to the PermGen and a minimum of 1.5G for the heap.  The setting from setSOADomainEnv are shown below: set DEFAULT_MEM_ARGS=-Xms1536m -Xmx2048m set PORT_MEM_ARGS=-Xms1536m -Xmx2048m set DEFAULT_MEM_ARGS=%DEFAULT_MEM_ARGS% -XX:PermSize=512m -XX:MaxPermSize=768m set PORT_MEM_ARGS=%PORT_MEM_ARGS% -XX:PermSize=512m -XX:MaxPermSize=768m I arrived at these numbers by monitoring JVM memory usage in JConsole. Task Manager showed total system memory usage at 2.9G – just below the 3G I allocated to the VM. Performance is not stellar but it runs and I could run JDeveloper alongside it on my 8G laptop, so in that sense it was a result!

  Read the article

• MySQL Connect 9 Days Away – Optimizer Sessions

  - by Bertrand Matthelié

  72 1024x768 Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Following my previous blog post focusing on InnoDB talks at MySQL Connect, let us review today the sessions focusing on the MySQL Optimizer: Saturday, 11.30 am, Room Golden Gate 6: MySQL Optimizer Overview—Olav Sanstå, Oracle The goal of MySQL optimizer is to take a SQL query as input and produce an optimal execution plan for the query. This session presents an overview of the main phases of the MySQL optimizer and the primary optimizations done to the query. These optimizations are based on a combination of logical transformations and cost-based decisions. Examples of optimization strategies the presentation covers are the main query transformations, the join optimizer, the data access selection strategies, and the range optimizer. For the cost-based optimizations, an overview of the cost model and the data used for doing the cost estimations is included. Saturday, 1.00 pm, Room Golden Gate 6: Overview of New Optimizer Features in MySQL 5.6—Manyi Lu, Oracle Many optimizer features have been added into MySQL 5.6. This session provides an introduction to these great features. Multirange read, index condition pushdown, and batched key access will yield huge performance improvements on large data volumes. Structured explain, explain for update/delete/insert, and optimizer tracing will help users analyze and speed up queries. And last but not least, the session covers subquery optimizations in Release 5.6. Saturday, 7.00 pm, Room Golden Gate 4: BoF: Query Optimizations: What Is New and What Is Coming? This BoF presents common techniques for query optimization, covers what is new in MySQL 5.6, and provides a discussion forum in which attendees can tell the MySQL optimizer team which optimizations they would like to see in the future. Sunday, 1.15 pm, Room Golden Gate 8: Query Performance Comparison of MySQL 5.5 and MySQL 5.6—Øystein Grøvlen, Oracle MySQL Release 5.6 contains several improvements in the query optimizer that create improved performance for complex queries. This presentation looks at how MySQL 5.6 improves the performance of many of the queries in the DBT-3 benchmark. Based on the observed improvements, the presentation discusses what makes the specific queries perform better in Release 5.6. It describes the relevant new optimization techniques and gives examples of the types of queries that will benefit from these techniques. Sunday, 4.15 pm, Room Golden Gate 4: Powerful EXPLAIN in MySQL 5.6—Evgeny Potemkin, Oracle The EXPLAIN command of MySQL has long been a very useful tool for understanding how MySQL will execute a query. Release 5.6 of the MySQL database offers several new additions that give more-detailed information about the query plan and make it easier to understand at the same time. This presentation gives an overview of new EXPLAIN features: structured EXPLAIN in JSON format, EXPLAIN for INSERT/UPDATE/DELETE, and optimizer tracing. Examples in the session give insights into how you can take advantage of the new features. They show how these features supplement and relate to each other and to classical EXPLAIN and how and why the MySQL server chooses a particular query plan. You can check out the full program here as well as in the September edition of the MySQL newsletter. Not registered yet? You can still save US$ 300 over the on-site fee – Register Now!

  Read the article

• Developing Schema Compare for Oracle (Part 3): Ghost Objects

  - by Simon Cooper

  In the previous blog post, I covered how we solved the problem of dependencies between objects and between schemas. However, that isn’t the end of the issue. The dependencies algorithm I described works when you’re querying live databases and you can get dependencies for a particular schema direct from the server, and that’s all well and good. To throw a (rather large) spanner in the works, Schema Compare also has the concept of a snapshot, which is a read-only compressed XML representation of a selection of schemas that can be compared in the same way as a live database. This can be useful for keeping historical records or a baseline of a database schema, or comparing a schema on a computer that doesn’t have direct access to the database. So, how do snapshots interact with dependencies? Inter-database dependencies don't pose an issue as we store the dependencies in the snapshot. However, comparing a snapshot to a live database with cross-schema dependencies does cause a problem; what if the live database has a dependency to an object that does not exist in the snapshot? Take a basic example schema, where you’re only populating SchemaA: SOURCE   TARGET (using snapshot) CREATE TABLE SchemaA.Table1 ( Col1 NUMBER REFERENCES SchemaB.Table1(col1));   CREATE TABLE SchemaA.Table1 ( Col1 VARCHAR2(100)); CREATE TABLE SchemaB.Table1 ( Col1 NUMBER PRIMARY KEY);   CREATE TABLE SchemaB.Table1 ( Col1 VARCHAR2(100)); In this case, we want to generate a sync script to synchronize SchemaA.Table1 on the database represented by the snapshot. When taking a snapshot, database dependencies are followed, but because you’re not comparing it to anything at the time, the comparison dependencies algorithm described in my last post cannot be used. So, as you only take a snapshot of SchemaA on the target database, SchemaB.Table1 will not be in the snapshot. If this snapshot is then used to compare against the above source schema, SchemaB.Table1 will be included in the source, but the object will not be found in the target snapshot. This is the same problem that was solved with comparison dependencies, but here we cannot use the comparison dependencies algorithm as the snapshot has not got any information on SchemaB! We've now hit quite a big problem - we’re trying to include SchemaB.Table1 in the target, but we simply do not know the status of this object on the database the snapshot was taken from; whether it exists in the database at all, whether it’s the same as the target, whether it’s different... What can we do about this sorry state of affairs? Well, not a lot, it would seem. We can’t query the original database, as it may not be accessible, and we cannot assume any default state as it could be wrong and break the script (and we currently do not have a roll-back mechanism for failed synchronizes). The only way to fix this properly is for the user to go right back to the start and re-create the snapshot, explicitly including the schemas of these 'ghost' objects. So, the only thing we can do is flag up dependent ghost objects in the UI, and ask the user what we should do with it – assume it doesn’t exist, assume it’s the same as the target, or specify a definition for it. Unfortunately, such functionality didn’t make the cut for v1 of Schema Compare (as this is very much an edge case for a non-critical piece of functionality), so we simply flag the ghost objects up in the sync wizard as unsyncable, and let the user sort out what’s going on and edit the sync script as appropriate. There are some things that we do do to alleviate somewhat this rather unhappy situation; if a user creates a snapshot from the source or target of a database comparison, we include all the objects registered from the database, not just the ones in the schemas originally selected for comparison. This includes any extra dependent objects registered through the comparison dependencies algorithm. If the user then compares the resulting snapshot against the same database they were comparing against when it was created, the extra dependencies will be included in the snapshot as required and everything will be good. Fortunately, this problem will come up quite rarely, and only when the user uses snapshots and tries to sync objects with unknown cross-schema dependencies. However, the solution is not an easy one, and lead to some difficult architecture and design decisions within the product. And all this pain follows from the simple decision to allow schema pre-filtering! Next: why adding a column to a table isn't as easy as you would think...

  Read the article

• The clock hands of the buffer cache

  - by Tony Davis

  Over a leisurely beer at our local pub, the Waggon and Horses, Phil Factor was holding forth on the esoteric, but strangely poetic, language of SQL Server internals, riddled as it is with 'sleeping threads', 'stolen pages', and 'memory sweeps'. Generally, I remain immune to any twinge of interest in the bowels of SQL Server, reasoning that there are certain things that I don't and shouldn't need to know about SQL Server in order to use it successfully. Suddenly, however, my attention was grabbed by his mention of the 'clock hands of the buffer cache'. Back at the office, I succumbed to a moment of weakness and opened up Google. He wasn't lying. SQL Server maintains various memory buffers, or caches. For example, the plan cache stores recently-used execution plans. The data cache in the buffer pool stores frequently-used pages, ensuring that they may be read from memory rather than via expensive physical disk reads. These memory stores are classic LRU (Least Recently Updated) buffers, meaning that, for example, the least frequently used pages in the data cache become candidates for eviction (after first writing the page to disk if it has changed since being read into the cache). SQL Server clearly needs some mechanism to track which pages are candidates for being cleared out of a given cache, when it is getting too large, and it is this mechanism that is somewhat more labyrinthine than I previously imagined. Each page that is loaded into the cache has a counter, a miniature "wristwatch", which records how recently it was last used. This wristwatch gets reset to "present time", each time a page gets updated and then as the page 'ages' it clicks down towards zero, at which point the page can be removed from the cache. But what is SQL Server is suffering memory pressure and urgently needs to free up more space than is represented by zero-counter pages (or plans etc.)? This is where our 'clock hands' come in. Each cache has associated with it a "memory clock". Like most conventional clocks, it has two hands; one "external" clock hand, and one "internal". Slava Oks is very particular in stressing that these names have "nothing to do with the equivalent types of memory pressure". He's right, but the names do, in that peculiar Microsoft tradition, seem designed to confuse. The hands do relate to memory pressure; the cache "eviction policy" is determined by both global and local memory pressures on SQL Server. The "external" clock hand responds to global memory pressure, in other words pressure on SQL Server to reduce the size of its memory caches as a whole. Global memory pressure – which just to confuse things further seems sometimes to be referred to as physical memory pressure – can be either external (from the OS) or internal (from the process itself, e.g. due to limited virtual address space). The internal clock hand responds to local memory pressure, in other words the need to reduce the size of a single, specific cache. So, for example, if a particular cache, such as the plan cache, reaches a defined "pressure limit" the internal clock hand will start to turn and a memory sweep will be performed on that cache in order to remove plans from the memory store. During each sweep of the hands, the usage counter on the cache entry is reduced in value, effectively moving its "last used" time to further in the past (in effect, setting back the wrist watch on the page a couple of hours) and increasing the likelihood that it can be aged out of the cache. There is even a special Dynamic Management View, sys.dm_os_memory_cache_clock_hands, which allows you to interrogate the passage of the clock hands. Frequently turning hands equates to excessive memory pressure, which will lead to performance problems. Two hours later, I emerged from this rather frightening journey into the heart of SQL Server memory management, fascinated but still unsure if I'd learned anything that I'd put to any practical use. However, I certainly began to agree that there is something almost Tolkeinian in the language of the deep recesses of SQL Server. Cheers, Tony.

  Read the article

• SSAS Maestro Training in July 2012 #ssasmaestro #ssas

  - by Marco Russo (SQLBI)

  A few hours ago Chris Webb blogged about SSAS Maestro and I’d like to propagate the news, adding also some background info. SSAS Maestro is the premier certification on Analysis Services that selects the best experts in Analysis Services around the world. In 2011 Microsoft organized two rounds of training/exams for SSAS Maestros and up to now only 11 people from the first wave have been announced – around 10% of attendees of the course! In the next few days the new Maestros from the second round should be announced and this long process is caused by many factors that I’m going to explain. First, the course is just a step in the process. Before the course you receive a list of topics to study, including the slides of the course. During the course, students receive a lot of information that might not have been included in the slides and the best part of the course is class interaction. Students are expected to bring their experience to the table and comparing case studies, experiences and having long debates is an important part of the learning process. And it is also a part of the evaluation: good questions might be also more important than good answers! Finally, after the course, students have their homework and this may require one or two months to be completed. After that, a long (very long) evaluation process begins, taking into account homework, labs, participation… And for this reason the final evaluation may arrive months later after the course. We are going to improve and shorten this process with the next courses. The first wave of SSAS Maestro had been made by invitation only and now the program is opening, requiring a fee to participate in order to cover the cost of preparation, training and exam. The number of attendees will be limited and candidates will have to send their CV in order to be admitted to the course. Only experienced Analysis Services developers will be able to participate to this challenging program. So why you should do that? Well, only 10% of students passed the exam until now. So if you need 100% guarantee to pass the exam, you need to study a lot, before, during and after the course. But the course by itself is a precious opportunity to share experience, create networking and learn mission-critical enterprise-level best practices that it’s hard to find written on books. Oh, well, many existing white papers are a required reading *before* the course! The course is now 5 days long, and every day can be *very* long. We’ll have lectures and discussions in the morning and labs in the afternoon/evening. Plus some more lectures in one or two afternoons. A heavy part of the course is about performance optimization, capacity planning, monitoring. This edition will introduce also Tabular models, and don’t expect something you might find in the SSAS Tabular Workshop – only performance, scalability monitoring and optimization will be covered, knowing Analysis Services is a requirement just to be accepted! I and Chris Webb will be the teachers for this edition. The course is expensive. Applying for SSAS Maestro will cost around 7000€ plus taxes (reduced to 5000€ for students of a previous SSAS Maestro edition). And you will be locked in a training room for the large part of the week. So why you should do that? Well, as I said, this is a challenging course. You will not find the time to check your email – the content is just too much interesting to think you can be distracted by something else. Another good reason is that this course will take place in Italy. Well, the course will take place in the brand new Microsoft Innovation Campus, but in general we’ll be able to provide you hints to get great food and, if you are willing to attach one week-end to your trip, there are plenty of places to visit (and I’m not talking about the classic Rome-Florence-Venice) – you might really need to relax after such a week! Finally, the marking process after the course will be faster – we’d like to complete the evaluation within three months after the course, considering that 1-2 months might be required to complete the homework. If at this point you are not scared: registration will open in mid-April, but you can already write to [email protected] sending your CV/resume and a short description of your level of SSAS knowledge and experience. The selection process will start early and you may want to put your admission form on top of the FIFO queue!

  Read the article

• Create Advanced Panoramas with Microsoft Image Composite Editor

  - by Matthew Guay

  Do you enjoy making panoramas with your pictures, but want more features than tools like Live Photo Gallery offer?  Here’s how you can create amazing panoramas for free with the Microsoft Image Composite Editor. Yesterday we took a look at creating panoramic photos in Windows Live Photo Gallery. Today we take a look at a free tool from Microsoft that will give you more advanced features to create your own masterpiece. Getting Started Download Microsoft Image Composite Editor from Microsoft Research (link below), and install as normal.  Note that there are separate version for 32 & 64-bit editions of Windows, so make sure to download the correct one for your computer. Once it’s installed, you can proceed to create awesome panoramas and extremely large image combinations with it.  Microsoft Image Composite Editor integrates with Live Photo Gallery, so you can create more advanced panoramic pictures directly.  Select the pictures you want to combine, click Extras in the menu bar, and select Create Image Composite. You can also create a photo stitch directly from Explorer.  Select the pictures you want to combine, right-click, and select Stitch Images… Or, simply launch the Image Composite Editor itself and drag your pictures into its editor.  Either way you start a image composition, the program will automatically analyze and combine your images.  This application is optimized for multiple cores, and we found it much faster than other panorama tools such as Live Photo Gallery. Within seconds, you’ll see your panorama in the top preview pane. From the bottom of the window, you can choose a different camera motion which will change how the program stitches the pictures together.  You can also quickly crop the picture to the size you want, or use Automatic Crop to have the program select the maximum area with a continuous picture.   Here’s how our panorama looked when we switched the Camera Motion to Planar Motion 2. But, the real tweaking comes in when you adjust the panorama’s projection and orientation.  Click the box button at the top to change these settings. The panorama is now overlaid with a grid, and you can drag the corners and edges of the panorama to change its shape. Or, from the Projection button at the top, you can choose different projection modes. Here we’ve chosen Cylinder (Vertical), which entirely removed the warp on the walls in the image.  You can pan around the image, and get the part you find most important in the center.  Click the Apply button on the top when you’re finished making changes, or click Revert if you want to switch to the default view settings. Once you’ve finished your masterpiece, you can export it easily to common photo formats from the Export panel on the bottom.  You can choose to scale the image or set it to a maximum width and height as well.  Click Export to disk to save the photo to your computer, or select Publish to Photosynth to post your panorama online. Alternately, from the File menu you can choose to save the panorama as .spj file.  This preserves all of your settings in the Image Composite Editor so you can edit it more in the future if you wish.   Conclusion Whether you’re trying to capture the inside of a building or a tall tree, the extra tools in Microsoft Image Composite Editor let you make nicer panoramas than you ever thought possible.  We found the final results surprisingly accurate to the real buildings and objects, especially after tweaking the projection modes.  This tool can be both fun and useful, so give it a try and let us know what you’ve found it useful for. Works with 32 & 64-bit versions of XP, Vista, and Windows 7 Link Download Microsoft Image Composite Editor Similar Articles Productive Geek Tips Change or Set the Greasemonkey Script Editor in FirefoxNew Vista Syntax for Opening Control Panel Items from the Command-lineTune Your ClearType Font Settings in Windows VistaChange the Default Editor From Nano on Ubuntu LinuxMake MSE Create a Restore Point Before Cleaning Malware TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Get a free copy of WinUtilities Pro 2010 World Cup Schedule Boot Snooze – Reboot and then Standby or Hibernate Customize Everything Related to Dates, Times, Currency and Measurement in Windows 7 Google Earth replacement Icon (Icons we like) Build Great Charts in Excel with Chart Advisor

  Read the article

• Windows Azure Recipe: Enterprise LOBs

  - by Clint Edmonson

  Enterprises are more and more dependent on their specialized internal Line of Business (LOB) applications than ever before. Naturally, the more software they leverage on-premises, the more infrastructure they need manage. It’s frequently the case that our customers simply can’t scale up their hardware purchases and operational staff as fast as internal demand for software requires. The result is that getting new or enhanced applications in the hands of business users becomes slower and more expensive every day. Being able to quickly deliver applications in a rapidly changing business environment while maintaining high standards of corporate security is a challenge that can be met right now by moving enterprise LOBs out into the cloud and leveraging Azure’s Access Control services. In fact, we’re seeing many of our customers (both large and small) see huge benefits from moving their web based business applications such as corporate help desks, expense tracking, travel portals, timesheets, and more to Windows Azure. Drivers Cost Reduction Time to market Security Solution Here’s a sketch of how many Windows Azure Enterprise LOBs are being architected and deployed: Ingredients Web Role – this will host the core of the application. Each web role is a virtual machine hosting an application written in ASP.NET (or optionally php, or node.js). The number of web roles can be scaled up or down as needed to handle peak and non-peak traffic loads. Many Java based applications are also being deployed to Windows Azure with a little more effort. Database – every modern web application needs to store data. SQL Azure databases look and act exactly like their on-premise siblings but are fault tolerant and have data redundancy built in. Access Control – this service is necessary to establish federated identity between the cloud hosted application and an enterprise’s corporate network. It works in conjunction with a secure token service (STS) that is hosted on-premises to establish the corporate user’s identity and credentials. The source code for an on-premises STS is provided in the Windows Azure training kit and merely needs to be customized for the corporate environment and published on a publicly accessible corporate web site. Once set up, corporate users see a near seamless single sign-on experience. Reporting – businesses live and die by their reports and SQL Azure Reporting, based on SQL Server Reporting 2008 R2, can serve up reports with tables, charts, maps, gauges, and more. These reports can be accessed from the Windows Azure Portal, through a web browser, or directly from applications. Service Bus (optional) – if deep integration with other applications and systems is needed, the service bus is the answer. It enables secure service layer communication between applications hosted behind firewalls in on-premises or partner datacenters and applications hosted inside Windows Azure. The Service Bus provides the ability to securely expose just the information and services that are necessary to create a simpler, more secure architecture than opening up a full blown VPN. Data Sync (optional) – in cases where the data stored in the cloud needs to be shared internally, establishing a secure one-way or two-way data-sync connection between the on-premises and off-premises databases is a perfect option. It can be very granular, allowing us to specify exactly what tables and columns to synchronize, setup filters to sync only a subset of rows, set the conflict resolution policy for two-way sync, and specify how frequently data should be synchronized Training Labs These links point to online Windows Azure training labs where you can learn more about the individual ingredients described above. (Note: The entire Windows Azure Training Kit can also be downloaded for offline use.) Windows Azure (16 labs) Windows Azure is an internet-scale cloud computing and services platform hosted in Microsoft data centers, which provides an operating system and a set of developer services which can be used individually or together. It gives developers the choice to build web applications; applications running on connected devices, PCs, or servers; or hybrid solutions offering the best of both worlds. New or enhanced applications can be built using existing skills with the Visual Studio development environment and the .NET Framework. With its standards-based and interoperable approach, the services platform supports multiple internet protocols, including HTTP, REST, SOAP, and plain XML SQL Azure (7 labs) Microsoft SQL Azure delivers on the Microsoft Data Platform vision of extending the SQL Server capabilities to the cloud as web-based services, enabling you to store structured, semi-structured, and unstructured data. Windows Azure Services (9 labs) As applications collaborate across organizational boundaries, ensuring secure transactions across disparate security domains is crucial but difficult to implement. Windows Azure Services provides hosted authentication and access control using powerful, secure, standards-based infrastructure. See my Windows Azure Resource Guide for more guidance on how to get started, including links web portals, training kits, samples, and blogs related to Windows Azure.

  Read the article

• Stand-Up Desk 2012 Update

  - by BuckWoody

  One of the more popular topics here on my technical blog doesn't have to do with technology, per-se - it's about the choice I made to go to a stand-up desk work environment. If you're interested in the history of those, check here: Stand-Up Desk Part One Stand-Up Desk Part Two I have made some changes and I was asked to post those here.Yes, I'm still standing - I think the experiment has worked well, so I'm continuing to work this way. I've become so used to it that I notice when I sit for a long time. If I'm flying, or driving a long way, or have long meetings, I take breaks to stand up and move around. That being said, I don't stand as much as I did. I started out by standing the entire day - which did not end well. As you can read in my second post, I found that sitting down for a few minutes each hour worked out much better. And over time I would say that I now stand about 70-80% of the day, depending on the day. Some days I don't even notice I'm standing, so I don't sit as often. Other days I find that I really tire quickly - so I sit more often. But in both cases, I stand more than I sit. In the first post you can read about how I used a simple coffee-table from Ikea to elevate my desktop to the right height. I then adjusted the height where I stand by using a small plastic square and some carpet. Over time I found this did not work as well as I'd like. The primary reason is that the front of these are at the same depth - so my knees would hit the desk or table when I sat down. Also, the desk was at a certain height, and I had to adjust, rather than the other way around.  Also, I like a lot of surface area on top of a desk - almost more of a table. Routing cables and wiring was a pain, and of course moving it was out of the question.   So I've changed what I use. I found a perfect solution for what I was looking for - industrial wire shelving: I bought one, built only half of it (for the right height I wanted) and arranged the shelves the way I wanted. I then got a 5'x4' piece of wood from Lowes, and mounted it to where the top was balanced, but had an over-hang  I could get my knees under easily.My wife sewed a piece of fake-leather for the top. This arrangement provides the following benefits: Very strong Rolls easily, wheels can lock to prevent rolling Long, wide shelves Wire-frame allows me to route any kind of wiring and other things all over the desk I plugged in my UPS and ran it's longer power-cable to the wall outlet. I then ran the router's LAN connection along that wire, and covered both with a large insulation sleeve. I then plugged in everything to the UPS, and routed all the wiring. I can now roll the desk almost anywhere in the room so that I can record, look out the window, get closer to or farther away from the door and more. I put a few boxes on the shelves as "drawers" and tidied that part up. Even my printer fits on a shelf. Laser-dog not included - some assembly required In the second post you can read about the bar-stool I purchased from Target for the desk. I cheaped-out on this one, and it proved to be a bad choice. Because I had to raise it so high, and was constantly sitting on it and then standing up, the gas-cylinder in it just gave out. So it became a very short stool that I ended up getting rid of. In the end, this one from Ikea proved to be a better choice: And so this arrangement is working out perfectly. I'm finding myself VERY productive this way. I hope these posts help you if you decide to try working at a stand-up desk. Although I was skeptical at first, I've found it to be a very healthy, easy way to code, design and especially present over a web-cam. It's natural to stand to speak when you're presenting, and it feels more energetic than sitting down to talk to others.

  Read the article

• Running a Mongo Replica Set on Azure VM Roles

  - by Elton Stoneman

  Originally posted on: http://geekswithblogs.net/EltonStoneman/archive/2013/10/15/running-a-mongo-replica-set-on-azure-vm-roles.aspxSetting up a MongoDB Replica Set with a bunch of Azure VMs is straightforward stuff. Here’s a step-by-step which gets you from 0 to fully-redundant 3-node document database in about 30 minutes (most of which will be spent waiting for VMs to fire up). First, create yourself 3 VM roles, which is the minimum number of nodes you need for high availability. You can use any OS that Mongo supports. This guide uses Windows but the only difference will be the mechanism for starting the Mongo service when the VM starts (Windows Service, daemon etc.) While the VMs are provisioning, download and install Mongo locally, so you can set up the replica set with the Mongo shell. We’ll create our replica set from scratch, doing one machine at a time (if you have a single node you want to upgrade to a replica set, it’s the same from step 3 onwards): 1. Setup Mongo Log into the first node, download mongo and unzip it to C:. Rename the folder to remove the version – so you have c:\MongoDB\bin etc. – and create a new folder for the logs, c:\MongoDB\logs. 2. Setup your data disk When you initialize a node in a replica set, Mongo pre-allocates a whole chunk of storage to use for data replication. It will use up to 5% of your data disk, so if you use a Windows VM image with a defsault 120Gb disk and host your data on C:, then Mongo will allocate 6Gb for replication. And that takes a while. Instead you can create yourself a new partition by shrinking down the C: drive in Computer Management, by say 10Gb, and then creating a new logical disk for your data from that spare 10Gb, which will be allocated as E:. Create a new folder, e:\data. 3. Start Mongo When that’s done, start a command line, point to the mongo binaries folder, install Mongo as a Windows Service, running in replica set mode, and start the service: cd c:\mongodb\bin mongod -logpath c:\mongodb\logs\mongod.log -dbpath e:\data -replSet TheReplicaSet –install net start mongodb 4. Open the ports Mongo uses port 27017 by default, so you need to allow access in the machine and in Azure. In the VM, open Windows Firewall and create a new inbound rule to allow access via port 27017. Then in the Azure Management Console for the VM role, under the Configure tab add a new rule, again to allow port 27017. 5. Initialise the replica set Start up your local mongo shell, connecting to your Azure VM, and initiate the replica set: c:\mongodb\bin\mongo sc-xyz-db1.cloudapp.net rs.initiate() This is the bit where the new node (at this point the only node) allocates its replication files, so if your data disk is large, this can take a long time (if you’re using the default C: drive with 120Gb, it may take so long that rs.initiate() never responds. If you’re sat waiting more than 20 minutes, start another instance of the mongo shell pointing to the same machine to check on it). Run rs.conf() and you should see one node configured. 6. Fix the host name for the primary – *don’t miss this one* For the first node in the replica set, Mongo on Windows doesn’t populate the full machine name. Run rs.conf() and the name of the primary is sc-xyz-db1, which isn’t accessible to the outside world. The replica set configuration needs the full DNS name of every node, so you need to manually rename it in your shell, which you can do like this: cfg = rs.conf() cfg.members[0].host = ‘sc-xyz-db1.cloudapp.net:27017’ rs.reconfig(cfg) When that returns, rs.conf() will have your full DNS name for the primary, and the other nodes will be able to connect. At this point you have a working database, so you can start adding documents, but there’s no replication yet. 7. Add more nodes For the next two VMs, follow steps 1 through to 4, which will give you a working Mongo database on each node, which you can add to the replica set from the shell with rs.add(), using the full DNS name of the new node and the port you’re using: rs.add(‘sc-xyz-db2.cloudapp.net:27017’) Run rs.status() and you’ll see your new node in STARTUP2 state, which means its initializing and replicating from the PRIMARY. Repeat for your third node: rs.add(‘sc-xyz-db3.cloudapp.net:27017’) When all nodes are finished initializing, you will have a PRIMARY and two SECONDARY nodes showing in rs.status(). Now you have high availability, so you can happily stop db1, and one of the other nodes will become the PRIMARY with no loss of data or service. Note – the process for AWS EC2 is exactly the same, but with one important difference. On the Azure Windows Server 2012 base image, the MongoDB release for 64-bit 2008R2+ works fine, but on the base 2012 AMI that release keeps failing with a UAC permission error. The standard 64-bit release is fine, but it lacks some optimizations that are in the 2008R2+ version.

  Read the article

• Imaging: Paper Paper Everywhere, but None Should be in Sight

  - by Kellsey Ruppel

  Author: Vikrant Korde, Technical Architect, Aurionpro's Oracle Implementation Services team My wedding photos are stored in several empty shoeboxes. Yes...I got married before digital photography was mainstream...which means I'm old. But my parents are really old. They have shoeboxes filled with vacation photos on slides (I doubt many of you have even seen a home slide projector...and I hope you never do!). Neither me nor my parents should have shoeboxes filled with any form of photographs whatsoever. They should obviously live in the digital world...with no physical versions in sight (other than a few framed on our walls). Businesses grapple with similar challenges. But instead of shoeboxes, they have file cabinets and warehouses jam packed with paper invoices, legal documents, human resource files, material safety data sheets, incident reports, and the list goes on and on. In fact, regulatory and compliance rules govern many industries, requiring that this paperwork is available for any number of years. It's a real challenge...especially trying to find archived documents quickly and many times with no backup. Which brings us to a set of technologies called Image Process Management (or simply Imaging or Image Processing) that are transforming these antiquated, paper-based processes. Oracle's WebCenter Content Imaging solution is a combination of their WebCenter suite, which offers a robust set of content and document management features, and their Business Process Management (BPM) suite, which helps to automate business processes through the definition of workflows and business rules. Overall, the solution provides an enterprise-class platform for end-to-end management of document images within transactional business processes. It's a solution that provides all of the capabilities needed - from document capture and recognition, to imaging and workflow - to effectively transform your ‘shoeboxes’ of files into digitally managed assets that comply with strict industry regulations. The terminology can be quite overwhelming if you're new to the space, so we've provided a summary of the primary components of the solution below, along with a short description of the two paths that can be executed to load images of scanned documents into Oracle's WebCenter suite. WebCenter Imaging (WCI): the electronic document repository that provides security, annotations, and search capabilities, and is the primary user interface for managing work items in the imaging solution SOA & BPM Suites (workflow): provide business process management capabilities, including human tasks, workflow management, service integration, and all other standard SOA features. It's interesting to note that there a number of 'jumpstart' processes available to help accelerate the integration of business applications, such as the accounts payable invoice processing solution for E-Business Suite that facilitates the processing of large volumes of invoices WebCenter Enterprise Capture (WEC): expedites the capture process of paper documents to digital images, offering high volume scanning and importing from email, and allows for flexible indexing options WebCenter Forms Recognition (WFR): automatically recognizes, categorizes, and extracts information from paper documents with greatly reduced human intervention WebCenter Content: the backend content server that provides versioning, security, and content storage There are two paths that can be executed to send data from WebCenter Capture to WebCenter Imaging, both of which are described below: 1. Direct Flow - This is the simplest and quickest way to push an image scanned from WebCenter Enterprise Capture (WEC) to WebCenter Imaging (WCI), using the bare minimum metadata. The WEC activities are defined below: The paper document is scanned (or imported from email). The scanned image is indexed using a predefined indexing profile. The image is committed directly into the process flow 2. WFR (WebCenter Forms Recognition) Flow - This is the more complex process, during which data is extracted from the image using a series of operations including Optical Character Recognition (OCR), Classification, Extraction, and Export. This process creates three files (Tiff, XML, and TXT), which are fed to the WCI Input Agent (the high speed import/filing module). The WCI Input Agent directory is a standard ingestion method for adding content to WebCenter Imaging, the process for doing so is described below: WEC commits the batch using the respective commit profile. A TIFF file is created, passing data through the file name by including values separated by "_" (underscores). WFR completes OCR, classification, extraction, export, and pulls the data from the image. In addition to the TIFF file, which contains the document image, an XML file containing the extracted data, and a TXT file containing the metadata that will be filled in WCI, are also created. All three files are exported to WCI's Input agent directory. Based on previously defined "input masks", the WCI Input Agent will pick up the seeding file (often the TXT file). Finally, the TIFF file is pushed in UCM and a unique web-viewable URL is created. Based on the mapping data read from the TXT file, a new record is created in the WCI application.  Although these processes may seem complex, each Oracle component works seamlessly together to achieve a high performing and scalable platform. The solution has been field tested at some of the largest enterprises in the world and has transformed millions and millions of paper-based documents to more easily manageable digital assets. For more information on how an Imaging solution can help your business, please contact [email protected] (for U.S. West inquiries) or [email protected] (for U.S. East inquiries). About the Author: Vikrant is a Technical Architect in Aurionpro's Oracle Implementation Services team, where he delivers WebCenter-based Content and Imaging solutions to Fortune 1000 clients. With more than twelve years of experience designing, developing, and implementing Java-based software solutions, Vikrant was one of the founding members of Aurionpro's WebCenter-based offshore delivery team. He can be reached at [email protected].

  Read the article

• Windows Azure Recipe: Software as a Service (SaaS)

  - by Clint Edmonson

  The cloud was tailor built for aspiring companies to create innovative internet based applications and solutions. Whether you’re a garage startup with very little capital or a Fortune 1000 company, the ability to quickly setup, deliver, and iterate on new products is key to capturing market and mind share. And if you can capture that share and go viral, having resiliency and infinite scale at your finger tips is great peace of mind. Drivers Cost avoidance Time to market Scalability Solution Here’s a sketch of how a basic Software as a Service solution might be built out: Ingredients Web Role – this hosts the core web application. Each web role will host an instance of the software and as the user base grows, additional roles can be spun up to meet demand. Access Control – this service is essential to managing user identity. It’s backed by a full blown implementation of Active Directory and allows the definition and management of users, groups, and roles. A pre-built ASP.NET membership provider is included in the training kit to leverage this capability but it’s also flexible enough to be combined with external Identity providers including Windows LiveID, Google, Yahoo!, and Facebook. The provider model provides extensibility to hook into other industry specific identity providers as well. Databases – nearly every modern SaaS application is backed by a relational database for its core operational data. If the solution is sold to organizations, there’s a good chance multi-tenancy will be needed. An emerging best practice for SaaS applications is to stand up separate SQL Azure database instances for each tenant’s proprietary data to ensure isolation from other tenants. Worker Role – this is the best place to handle autonomous background processing such as data aggregation, billing through external services, and other specialized tasks that can be performed asynchronously. Placing these tasks in a worker role frees the web roles to focus completely on user interaction and data input and provides finer grained control over the system’s scalability and throughput. Caching (optional) – as a web site traffic grows caching can be leveraged to keep frequently used read-only, user specific, and application resource data in a high-speed distributed in-memory for faster response times and ultimately higher scalability without spinning up more web and worker roles. It includes a token based security model that works alongside the Access Control service. Blobs (optional) – depending on the nature of the software, users may be creating or uploading large volumes of heterogeneous data such as documents or rich media. Blob storage provides a scalable, resilient way to store terabytes of user data. The storage facilities can also integrate with the Access Control service to ensure users’ data is delivered securely. Training & Examples These links point to online Windows Azure training labs and examples where you can learn more about the individual ingredients described above. (Note: The entire Windows Azure Training Kit can also be downloaded for offline use.) Windows Azure (16 labs) Windows Azure is an internet-scale cloud computing and services platform hosted in Microsoft data centers, which provides an operating system and a set of developer services which can be used individually or together. It gives developers the choice to build web applications; applications running on connected devices, PCs, or servers; or hybrid solutions offering the best of both worlds. New or enhanced applications can be built using existing skills with the Visual Studio development environment and the .NET Framework. With its standards-based and interoperable approach, the services platform supports multiple internet protocols, including HTTP, REST, SOAP, and plain XML SQL Azure (7 labs) Microsoft SQL Azure delivers on the Microsoft Data Platform vision of extending the SQL Server capabilities to the cloud as web-based services, enabling you to store structured, semi-structured, and unstructured data. Windows Azure Services (9 labs) As applications collaborate across organizational boundaries, ensuring secure transactions across disparate security domains is crucial but difficult to implement. Windows Azure Services provides hosted authentication and access control using powerful, secure, standards-based infrastructure. Developing Applications for the Cloud, 2nd Edition (eBook) This book demonstrates how you can create from scratch a multi-tenant, Software as a Service (SaaS) application to run in the cloud using the latest versions of the Windows Azure Platform and tools. The book is intended for any architect, developer, or information technology (IT) professional who designs, builds, or operates applications and services that run on or interact with the cloud. Fabrikam Shipping (SaaS reference application) This is a full end to end sample scenario which demonstrates how to use the Windows Azure platform for exposing an application as a service. We developed this demo just as you would: we had an existing on-premises sample, Fabrikam Shipping, and we wanted to see what it would take to transform it in a full subscription based solution. The demo you find here is the result of that investigation See my Windows Azure Resource Guide for more guidance on how to get started, including more links web portals, training kits, samples, and blogs related to Windows Azure.

  Read the article

< Previous Page | 414 415 416 417 418 419 420 421 422 423 424 425  | Next Page >