Search Results

Search found 24715 results on 989 pages for 'output parameters'.

Page 418/989 | < Previous Page | 414 415 416 417 418 419 420 421 422 423 424 425  | Next Page >

• Only one resolution available in Xorg.conf

  - by Kévin Guilbeault

  I recently upgraded to Ubuntu 12.10 and when I try to change my resolution in NVIDIA X server settings, I only get the native one (1600x900). When I had 12.04 installed, all resolutions were available in the drop down list. My goal is to have twinview working again. I used to set my two screens to twinview and clones, using my HDTV resolution (1360x768) which was previously available in 12.04 for my laptop screen too. In 12.10, I tried to install all of the NVIDIA drivers available except the nouveau driver. I tried to add a new mode using Xrandr --newmode / --addmode, but it didn't work; it coudn't detect my output. I'd like to know if this is a known bug and if there's something to do with that. Thanks!

  Read the article

• No sound after clean install

  - by John Cheednik

  Did a clean install of Ubuntu 12.10 and everything working great except for the sound. Ubuntu doesn't even seem to be recognizing the fact my HP dv6000 has the capability of making sound! I have the dummy output problem, and when I try to open alsamixer using terminal I get the message that no such file or directory exists. I can't get it to recognize any soundcards or audio devices at all. I've been working on the problem for a couple days now and have even taken the laptop apart to ensure that all cables are properly attached... When I go into the PhoenixBIOS there are no sound options that I can find. The laptop does make a loud beep if I press buttons in the BIOS, but once it boots to the hard drive, the thing is mute. HELP!

  Read the article

• How do I figure out the minimum number of swaps to sort a list in-place?

  - by sova

  In-place sorting is essentially swapping elements without using extra storage, correct? How can I find the minimum number of swaps required for a list? A C D Q R Z E // input | | | > > > <<< // movement A C D E Q R Z // output Swapping: A C D Q R Z E swap Q with E, ACDERZQ swap R with Q, ACDEQZR swap R with Z, ACDEQRZ. done. 3 swaps. Shifting items left or right is essentially swapping, but I want the optimal number for plucking an item out of line and switching its place with another.

  Read the article

• Loading assets in Monogame

  - by Matebu

  I'm creating a MonoGame application on Visual Studio 2012, yet when trying to load a texture I get the following problem: Could not load Menu/btnPlay asset! I have set content directory: Content.RootDirectory = "Assets"; Also the file btnPlay.png has properties set: Build Action: Content and Copy to Output directory: Copy if newer. My constructor and LoadContent functions are totally empty, but have a look yourself: public WizardGame() { Window.Title = "Just another Wizard game"; _graphics = new GraphicsDeviceManager(this); Content.RootDirectory = "Assets"; } protected override void LoadContent() { // Create a new SpriteBatch, which can be used to draw textures. _spriteBatch = new SpriteBatch(GraphicsDevice); Texture2D texture = Content.Load<Texture2D>("Menu/btnPlay"); _graphics.IsFullScreen = true; _graphics.ApplyChanges(); } How do I properly load a texture?

  Read the article

• How do I get a matching theme when I run a program as root?

  - by NES

  I use a Metacity theme in my Ubuntu installation. Unfortunately it isn't activated for programs with Gui that are started as root user and some other other certain programs like gufw (when i start gufw by commandline not as root)? It uses an old not very eyecandy Theme. For example for Gufw is gives the following output on commandline: /usr/share/themes/Finery/gtk-2.0/gtkrc:365: error: unexpected number `0', expected number (float) /usr/share/themes/Finery/gtk-2.0/gtkrc:365: error: unexpected number `0', expected number (float) What could be the reason, is there a way how to enable this theme also for these programs?

  Read the article

• How to route KVM virtual machine audio to Ubuntu 11.10 host using virt-manager?

  - by iGadget

  I've been using KVM in combination with Virt-Manager and Remmina at a fair success up until now. The issue I need to solve now is to get audio from a virtualized Windows XP and make it audible on the Ubuntu 11.10 host. Remmina / RDP works for 'simple' audio (system sounds and such), but when the source gets trickier (e.g. Flash audio), Remmina / RDP messes up. So I figured I'd just connect to the machine directly using Virt-Manager. Unfortunately, it seems that even though I have successfully configured the AC97 audio device on WinXP, it's unable to get it's output to the Ubuntu host. This is probably because Virt-Manager uses VNC (and AFAIK, VNC doesn't transport audio). Does anyone know if there is a solution to fix this? I've heard of Spice, but the installation required so much voodoo last time I checked, I figured I'd let that solution boil to maturity a little longer ;) But perhaps there are other options I haven't thought of yet (which don't require switching to VirtualBox / VMware)...

  Read the article

• HDMI signal interrputs after 10 minutes plugged in a TV

  - by desert_unbound

  Ubuntu 11.10, Dell Inspiron N4050, VLC, Jupiter I'm trying to watch movies through HDMI output on a TV, with VLC, with the notebook unplugged from AC (but with enough battery for 2-3 hours of use), just with TV display (the notebook display stays off) And from 10 to 10 minutes, the TV turns black, and according to the TV, the HDMI cable is unplugged. But using the touchpad makes the screen appear again. In "screen" options, on system settings, i've set the screen to never turn off, and never reduce brightness using battery. In "power" settings, i've set to not suspend when using battery. In Jupiter, i've set (while trying to watch the movie) to work in maximum performance. I'm pretty sure it's not VLC, because i've set it to override power options and screensaver options (and also im not using xscreensaver). Also the movie continues, when the screen is black Maybe there's something that i'm missing? When i plug the HDMI in the notebook, i use jupiter to change the display (using the option "external display only")... maybe is that ?

  Read the article

• How can I change resolution of "my video" in Skype?

  - by koushik

  I have a logitech Quickcam Pro 9000 connected to my ubuntu desktop and it works fine with Skype. However, Skype inputs and sends my video at the native (for the webcam I think) resolution of 1600 x 1200. I can confirm that the camera supports a wide variety of resolutions starting from 160 x 120 upto 1600 x 1200 (including e.g., 320 x 240, 352 x 288) using cheese. I can select these resolutions and see the output is appropriately scaled. Also, I don't see any improvements in smoothness of motion in the captured video so I suspect the original 1600 x 1200 is scaled down in the path somewhere. Is it possible to somehow to enable this scaling capability towards Skype?

  Read the article

• Upstart: sense of "stop on..." stanza when job is a task

  - by Binarus

  Hi, an upstart question (I think I have read all relevant man pages but could not find the answer there): What is the sense of using a "stop on ..." stanza in the definition of a job which is a task? The manuals tell us that such a job, after being started, just waits until its script (or exec stanza) is executed completely, and then stops automatically. Given that, what is the point in using "stop on ..." stanzas in such job definitions? For example, this is the job definition for Upstart's (very important) rc job in Natty 11.04 (leaving out comments and empty lines): start on runlevel [0123456] stop on runlevel [!$RUNLEVEL] export RUNLEVEL export PREVLEVEL console output env INIT_VERBOSE task exec /etc/init.d/rc $RUNLEVEL IMHO, the job, after being started by a runlevel event, will be stopped automatically as soon as /etc/init.d/rc $RUNLEVEL has finished. Thank you very much for any explanation!

  Read the article

• Problem with the screen resolution on 12.04

  - by sveinn

  I just installed Ubuntu on my laptop. The screen resolution is stuck in 1024x768. The screen is made for 1280x800. When I run xrandr I get: xrandr: Failed to get size of gamma for output default Screen 0: minimum 800 x 600, current 1024 x 768, maximum 1024 x 768 default connected 1024x768+0+0 0mm x 0mm 1024x768 61.0* 800x600 61.0 1280x800 isn't offered and I get gamma size error. I was going to look into the Xorg.conf file but I couldn't locate it. 1280x800 was displayed in Windows 7 and I think it is being displayed in Grub before Ubuntu starts also. Here are some details about my computer: CPU: Intel atom D2500 1.86GHz Chipset: Intel 945GSE+ICH7M LCD: 14" TFT 16:9 Resolution ratio: 1280*800 Video Card: Intel integrated GMA950 Does anyone know how to fix this?

  Read the article

• Ubuntu 12.04 Syntek in-built webcam not detected

  - by Farotz

  I have installed Ubuntu 12.04 and my inbuilt camera is not detected. I have tried with Cheese and GUVCView, but neither detects the webcam. I have also tried the solution proposed above using the Terminal, with no results. This is my lsusb output: farotz@farotz-EasyNote-BU45:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 174f:a821 Syntek Web Cam - Packard Bell BU45, PB Easynote MX66-208W Bus 002 Device 002: ID 1d57:0008 Bus 003 Device 002: ID 08ff:1600 AuthenTec, Inc. AES1600 Bus 001 Device 007: ID 12d1:142d Huawei Technologies Co., Ltd. farotz@farotz-EasyNote-BU45:~$ Any suggestions? Thank you.

  Read the article

• 12.04 sound keeps auto-muting when idle

  - by fali

  I just installed 12.04 on an HP8510W. Everything works fine except for one weird behavior which I have noticed. When ever there is no audio playing, the audio mute indicator on the laptop is on. As soon as I start playing a you tube video the mute indicator turns off and I get sound. Here is my pulse audio output which says that the sink is suspended because it is idle: Welcome to PulseAudio! Use "help" for usage information. list-sinks 1 sink(s) available. index: 0 name: <alsa_output.pci-0000_00_1b.0.analog-stereo> driver: <module-alsa-card.c> flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY state: SUSPENDED suspend cause: IDLE I tried running alsamixer, but I don't see the auto-mute option.

  Read the article

• Windows 7 can't boot with Ubuntu on different hard drive

  - by dellphi

  I use a dual boot with two hard disks and two OS is Ubuntu 10.04 and Windows 7. Windows 7 installed on the first disk, first partition. Grub is installed on a second hard disk MBR, and Ubuntu installed on an extended partition on a second hard drive. When I select Windows 7 on the Grub menu, the HDD lamp lights up briefly and then black screen on the monitor, with the status of the keyboard is still functioning. Until now (with the default boot from first HDD), I have to press F12 to get into the Grub to run Linux on a second HDD. output of fdisk -l grub.cfg. I want to retain Grub to remain on the second HDD, and Windows 7 could choose from the menu provided by Grub. But I do not get how, I hope anyone can help.

  Read the article

• How do I fix the Gparted message : Error while reading block at sector xxx ?

  - by Agmenor

  When I tried to move one of my partitions, I got some error messages. Here are some extracts: Move /dev/sda7 to the left 00:05:09 ( ERROR ) (...) check file system on /dev/sda7 for errors and (if possible) fix them 00:00:10 ( SUCCESS ) e2fsck -f -y -v /dev/sda7 (...) move file system to the left 00:04:52 ( ERROR ) perform read-only test 00:04:52 ( ERROR ) using internal algorithm read 114013242 sectors finding optimal blocksize (...) read 113357882 sectors using a blocksize of 1024 sectors 00:04:36 ( ERROR ) 22527034 of 113357882 read Error while reading block at sector 385849832 23182394 sectors read ( ERROR ) (...) libparted messages ( INFO ) Input/output error during read on /dev/sda What should I do to effectively move my partition?

  Read the article

• BizTalk 2009 - Size Functoid Fun

  - by StuartBrierley

  Recently when mapping a flat file from a third party source, I needed to check whether some elements had been sent with any content or not. In the source message these elements were being supplied in the form: <comment /> I though I would try using the size functoid, assuming that it would return a size of 0 for these empty elements.  What actully happens is that the Size funtoid returned a size of 1 rather than the 0 I was expecting. To get what I considered to be the correct output I needed to add a String Right Trim functoid before the Size functoid.  This then returned the "required" size of 0.

  Read the article

• Laptop won't get to grub after meddling with kernels

  - by Joren

  I recently found out I had different kernel versions installed, so I removed the 3.9 kernel as proposed in this answer on my earlier question. After that, I updated my grub, but My laptop won't seem to reach it. Output of aptitude search linux | grep ^i: i libselinux1 - SELinux runtime shared libraries i libselinux1:i386 - SELinux runtime shared libraries i linux-firmware - Firmware for Linux kernel drivers i A linux-headers-3.11.0-12 - Header files related to Linux kernel versi i A linux-headers-3.11.0-12-generic - Linux kernel headers for version 3.11.0 on i linux-headers-3.11.4-031104 - Header files related to Linux kernel versi i linux-headers-3.11.4-031104-gen - Linux kernel headers for version 3.11.4 on i linux-headers-generic - Generic Linux kernel headers i linux-libc-dev - Linux Kernel Headers for development i linux-sound-base - base package for ALSA and OSS sound system i pptp-linux - Point-to-Point Tunneling Protocol (PPTP) C i syslinux - collection of boot loaders i syslinux-common - collection of boot loaders (common files) i syslinux-legacy - Bootloader for Linux/i386 using MS-DOS flo i util-linux - Miscellaneous system utilities How do I proceed to fix this error from my live cd?

  Read the article

• How to xkill an application by its id?

  - by Hanynowsky

  I need to simulate the behavior of the keyboard shortcut (ALT+F4) using Terminal for a given application. If I open for example gedit and click ALT + F4 , then GEDIT will be xkilled. If I want to achieve same thing using Terminal, how should I proceed? The command export PIDTOKILL=pidof gedit | grep [^*]; xkill -id $PIDTOKILL does not work and gives the following error: xkill: killing creator of resource 0x3f38 X Error of failed request: BadValue (integer parameter out of range for operation) Major opcode of failed request: 113 (X_KillClient) Value in failed request: 0x3f38 Serial number of failed request: 8 Current serial number in output stream: 9 I think I am confusing application id and process id here

  Read the article

• Ubuntu 11.0 HDMI Video Card No 5.1 Audio

  - by ryandlf

  I am using Ubuntu and XMBC on my HTPC and have chosen the Radeon HD5570 Video card which has an HDMI output. In the sound preferences there is no surround sound option for the video card just stereo and although I can get sound through it in XBMC, my receiver does not state Dolby Digital on movies that are in fact Dolby so its definitely not giving me the true sound it should. Does this card not support surround sound through HDMI and I somehow missed it? If that is the case does anyone have suggestion that has been tested and works? Id like to know its going to work before investing in yet another video card.

  Read the article

• Getting wireless to work on Ubuntu 11.10 (on a mac machine)

  - by yayu

  I have a 2008 white 13.3 inch macbook that now solely runs ubuntu. However, I cannot get wifi or cable to work on it. Regarding the cable, it atleast tries to connect but eventually disconnects from the wired network. Here is the output for lspci (pastebin) I tried installing b43-fwcutter and firmware-b43 but get errors. (I loaded them from a thumb drive and tried sudo dpkg -i). I cannot understand these instructions from the documentation, as I cannot locate the pool directory. b43-fwcutter is located on the Ubuntu install media under ../pool/main/b/b43-fwcutter/ and patch is located under ../pool/main/p/patch/ or both in the official repositories online. Note: In some versions (10.04 and 11.04 at least) there is not a /pool/main/p/patch/ If this file is missing then you don't need it. In this case you only need to install /pool/main/b/b43-fwcutter by following the instructions below.

  Read the article

• Unable to boot OS X after installing Ubuntu 12.04

  - by A G

  I installed Ubuntu 12.04 on my MB (aluminium late 2008). After installing Ubuntu I am unable to boot into OS X. Sequence of events: Install reFit on OS X Install Ubuntu on a partitioned drive. I also installed grub. Now when I boot my MB only the grub menu shows up. When I select OS X under grub I see a black screen for a while and the machine restarts (when selecting OS X 64 bit) or it hangs indefinitely(OS X 32 bit). Could you please help? Link to output of boot info script. http://paste.ubuntu.com/1028017/

  Read the article

• SSD becomes hot, disk failure warning

  - by Aegluin

  I have a two weeks old SSD (Kingston SSDnow 64GB). Yesterday, the computer shutdown twice and after rebooting I was bombarded with disk failure warnings. I usually take such warnings serious (and backed up), but skeptical. After cooling down, the laptop boots again and the only red Smart value was the temperature (Ubuntu did not show the temperature of failure, but the at that time 29°). After refreshing the Smart status and doing a "self test", everything is green. Before contacting Kingston support, I would like to know whether it could be due to a software issue: Is it possible that it is false alarm, and how can I check? I installed Ubuntu 12.04 32bit and took care of alignment. I supposed Ubuntu set up with optimal settings for SSDs, how can I check that there was no mistake? The current temperature is around 40-56°. Is such a temperature abnormal for SSDs? Output of sudo smartctl --all /dev/sda: http://pastebin.ubuntu.com/1175940/

  Read the article

• 11.10 does not restore open apps in hibernate, works like shutdown

  - by jiewmeng

  I noticed that my 11.10 does not hibernate. When I hibernate, and starts PC, it doesn't restore all my open apps etc. Its like a shutdown ... why might that be? UPDATE Output from gsettings http://pastie.org/2926504 Using a vanilla Ubuntu Desktop 11.10 installed yesterday (no more from alternate CD, but problem still persists) I dont see any options in BIOS for S1, S3 or ACPI, are they hidden somewhere? I am using ASUS H67 Evo, I entered the Advanced mode of the BIOS, I still dont see those stuff ps-*.log files: http://pastie.org/2922774 GRUB entry: http://pastie.org/2922781

  Read the article

• Cocos2d: carom like game

  - by Raj

  Now I am working on carrom like game using cocos2d+Box2d. I set world gravity(0,0), want gravity in z - axis. I set following value for coin striker body: Coin body: density = 20.0f; friction = 0.4f; restitution = 0.6f; Shape Circle with radius - 15/PTM_RATIO Striker body: density = 25.0f; friction = 0.6f; restitution = 0.3f; Shape Circle with radius - 15/PTM_RATIO Output is not smooth, when I apply ApplyLinearImpulse(force,position); Coin movement looks like floating in air....takes too much time to stop... Which value of coin and striker makes it look like real carom?

  Read the article

• pulseaudio: no microphone configuration

  - by mitsch

  Updated Ubuntu to precise from oneiric on a Dell Inspirion Mini 10 (with an Intel HDA-Soundcard). I can't remember having any issues with the microphone. I didn't need it - I tried ekiga the first time in precise. I couldn't hear any sound in the echo test of ekiga, so I switched to the "System Preferences" and looked for the microphone to boost it. Surprisingly, the microphone input was greyed out - I couldn't mute or unmute, i couldn't even move the volume-slider. On the other hand: I could change the microphone-setting on console with alsamixer, so don't worry about that… :) I just wanted to ask, how to get pulseaudio back to the known, comfortable behaviour. Some newbies won't know the trick to use alsamixer… My soundcard (output of lspci): 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) Greets!

  Read the article

• Commenting/In-Code Documentation Styles

  - by Maxpm

  This might be a stupid question, but it's been in the back of my head for a while and I can't find a decent answer anywhere else. I have a teacher who says we should explicitly list each parameter with a description, even if there's only one. This leads to a lot of repetition: double MyFunction(const int MyParam); // Function: MyFunction // Summary: Does stuff with MyParam. // Input: int MyParam - The number to do stuff with. // Output: MyParam with stuff done to it. When writing in-code documentation, how detailed are you?

  Read the article

< Previous Page | 414 415 416 417 418 419 420 421 422 423 424 425  | Next Page >