strange but true - Page 418

wcf - maximum array length quota

- by dav.evans

Im writing a small wcf/wpf app to resize images but wcf is giving me grief when I try to send an image of size 28K to my service from the client. The service works fine when I send it smaller images. I immediately assumed that this was a configuration issue and I've trawled the web looking at posts regarding the MaxArrayLength property in my binding configuration. Ive upped the limits on these settings on both the client and server to the maximum 2147483647 but still I get the following error: {"The formatter threw an exception while trying to deserialize the message: There was an error while trying to deserialize parameter http://mywebsite.com/services/servicecontracts/2009/01:OriginalImage. The InnerException message was 'There was an error deserializing the object of type System.Drawing.Image. The maximum array length quota (16384) has been exceeded while reading XML data. This quota may be increased by changing the MaxArrayLength property on the XmlDictionaryReaderQuotas object used when creating the XML reader.'. Please see InnerException for more details."} Ive made my client and server configs the same and they look like the following: Server: <system.serviceModel> <bindings> <netTcpBinding> <binding name="NetTcpBinding_ImageResizerServiceContract" closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00" transactionFlow="false" transferMode="Buffered" transactionProtocol="OleTransactions" hostNameComparisonMode="StrongWildcard" listenBacklog="10" maxBufferPoolSize="2147483647" maxBufferSize="2147483647" maxConnections="10" maxReceivedMessageSize="2147483647"> <readerQuotas maxDepth="32" maxStringContentLength="2147483647" maxArrayLength="2147483647" maxBytesPerRead="2147483647" maxNameTableCharCount="2147483647" /> <reliableSession ordered="true" inactivityTimeout="00:10:00" enabled="false" /> <security mode="Transport"> <transport clientCredentialType="Windows" protectionLevel="EncryptAndSign" /> <message clientCredentialType="Windows" /> </security> </binding> </netTcpBinding> </bindings> <behaviors> <serviceBehaviors> <behavior name="ServiceBehavior"> <serviceMetadata httpGetEnabled="true" /> <serviceDebug includeExceptionDetailInFaults="false" /> </behavior> </serviceBehaviors> </behaviors> <services> <service name="LogoResizer.WCF.ServiceTypes.ImageResizerService" behaviorConfiguration="ServiceBehavior"> <host> <baseAddresses> <add baseAddress="http://localhost:900/mex/"/> <add baseAddress="net.tcp://localhost:9000/" /> </baseAddresses> </host> <endpoint binding="netTcpBinding" contract="LogoResizer.WCF.ServiceContracts.IImageResizerService" /> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"/> </service> </services> </system.serviceModel> and my client config looks like: <system.serviceModel> <bindings> <netTcpBinding> <binding name="NetTcpBinding_ImageResizerServiceContract" closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00" transactionFlow="false" transferMode="Buffered" transactionProtocol="OleTransactions" hostNameComparisonMode="StrongWildcard" listenBacklog="10" maxBufferPoolSize="2147483647" maxBufferSize="2147483647" maxConnections="10" maxReceivedMessageSize="2147483647"> <readerQuotas maxDepth="32" maxStringContentLength="2147483647" maxArrayLength="2147483647" maxBytesPerRead="2147483647" maxNameTableCharCount="2147483647" /> <reliableSession ordered="true" inactivityTimeout="00:10:00" enabled="false" /> <security mode="Transport"> <transport clientCredentialType="Windows" protectionLevel="EncryptAndSign" /> <message clientCredentialType="Windows" /> </security> </binding> </netTcpBinding> </bindings> <client> <endpoint address="net.tcp://localhost:9000/" binding="netTcpBinding" bindingConfiguration="NetTcpBinding_ImageResizerServiceContract" contract="ImageResizerService.ImageResizerServiceContract" name="NetTcpBinding_ImageResizerServiceContract"> <identity> <userPrincipalName value="[email protected]" /> </identity> </endpoint> </client> </system.serviceModel> It seems no matter what I set these values to I still get an error saying wcf cannot serialize my file because its greater than 16384. Any ideas? edit: the email address in the userPrincipalName tag has been altered for my privacy

Read the article

WPF: adding Style to a slider

- by user279244

Hi I am using a Slider and putting a style element over it as follows... But however, I am not able to figure out why the style is not getting reflected. The RepeatButtons are not still visible. Thanks in advance <ResourceDictionary> <LinearGradientBrush x:Key="Stroke_Gradient" EndPoint="0.5,1" StartPoint="0.5,0"> <GradientStop Color="#FF6E6E6E" Offset="0"/> <GradientStop Color="#FFFFFFFF" Offset="0.496"/> <GradientStop Color="#FF6E6E6E" Offset="1"/> </LinearGradientBrush> <Style x:Key="ScrollBar_RepeatButtonStyle1" d:IsControlPart="True" TargetType="{x:Type RepeatButton}"> <Setter Property="Background" Value="#FF6E6E6E"/> <Setter Property="BorderBrush" Value="#FFFFFFFF"/> <Setter Property="IsTabStop" Value="false"/> <Setter Property="Focusable" Value="false"/> <Setter Property="Template"> <Setter.Value> <ControlTemplate TargetType="{x:Type RepeatButton}"> <Grid> <Rectangle Fill="{TemplateBinding Background}" Stroke="{TemplateBinding BorderBrush}" StrokeThickness="{TemplateBinding BorderThickness}"/> </Grid> </ControlTemplate> </Setter.Value> </Setter> </Style> <ImageBrush x:Key="zoomBkgrnd" TileMode="None" ImageSource="zoombg.png" Stretch="Uniform"/> <Style x:Key="{x:Type Slider}" TargetType="{x:Type Slider}"> <Setter Property="Background" Value="{StaticResource zoomBkgrnd}"/> <Setter Property="BorderBrush" Value="{StaticResource zoomBkgrnd}"/> <Setter Property="Template"> <Setter.Value> <ControlTemplate TargetType="{x:Type Slider}"> <Grid x:Name="GridRoot"> <Grid.RowDefinitions> <RowDefinition Height="Auto"/> <RowDefinition Height="Auto" /> <RowDefinition Height="Auto"/> </Grid.RowDefinitions>  <TickBar Visibility="Collapsed" x:Name="TopTick" Height="4" SnapsToDevicePixels="True" Placement="Top" Fill="{StaticResource zoomBkgrnd}"/> <Border Grid.Row="1" Margin="0" x:Name="Border" Height="4" Background="{StaticResource zoomBkgrnd}" BorderBrush="{TemplateBinding BorderBrush}" BorderThickness="{TemplateBinding BorderThickness}" CornerRadius="2"/>  <Track Grid.Row="1" x:Name="PART_Track"> <Track.Thumb> <Thumb Width="10" Height="20" /> </Track.Thumb> <Track.IncreaseRepeatButton> <RepeatButton Style="{DynamicResource ScrollBar_RepeatButtonStyle1}" Command="Slider.IncreaseLarge"/> </Track.IncreaseRepeatButton> <Track.DecreaseRepeatButton> <RepeatButton Style="{DynamicResource ScrollBar_RepeatButtonStyle1}" Command="Slider.DecreaseLarge"/> </Track.DecreaseRepeatButton> </Track> <TickBar Visibility="Collapsed" Grid.Row="2" x:Name="BottomTick" Height="4" SnapsToDevicePixels="True" Placement="Bottom" Fill="{TemplateBinding Foreground}"/> </Grid> <ControlTemplate.Triggers> <Trigger Property="TickPlacement" Value="TopLeft"> <Setter Property="Visibility" Value="Visible" TargetName="TopTick"/> </Trigger> <Trigger Property="TickPlacement" Value="BottomRight"> <Setter Property="Visibility" Value="Visible" TargetName="BottomTick"/> </Trigger> <Trigger Property="TickPlacement" Value="Both"> <Setter Property="Visibility" Value="Visible" TargetName="TopTick"/> <Setter Property="Visibility" Value="Visible" TargetName="BottomTick"/> </Trigger> <Trigger Property="IsEnabled" Value="false"> <Setter Property="Background" Value="{StaticResource zoomBkgrnd}" TargetName="Border"/> <Setter Property="BorderBrush" Value="{StaticResource zoomBkgrnd}" TargetName="Border"/> </Trigger>  <Trigger Property="Orientation" Value="Vertical"> <Setter Property="LayoutTransform" TargetName="GridRoot"> <Setter.Value> <RotateTransform Angle="-90"/> </Setter.Value> </Setter>  <Setter TargetName="PART_Track" Property="Orientation" Value="Horizontal"/> </Trigger> </ControlTemplate.Triggers> </ControlTemplate> </Setter.Value> </Setter> </Style> </ResourceDictionary>

Read the article

How to configure LocalSessionFactoryBean to release connections after transaction end?

- by peter

I am testing an application (Spring 2.5, Hibernate 3.5.0 Beta, Atomikos 3.6.2, and Postgreql 8.4.2) with the configuration for the DAO listed below. The problem that I see is that the pool of 10 connections with the dataSource gets exhausted after the 10's transaction. I know 'hibernate.connection.release_mode' has no effect unless the session is obtained with openSession rather then using a contextual session. I am wandering if anyone has found a way to configure the LocalSessionFactoryBean to release connections after any transaction. Thank you Peter <bean id="dataSource" class="com.atomikos.jdbc.AtomikosDataSourceBean" init-method="init" destroy-method="close"> <property name="uniqueResourceName"><value>XADBMS</value></property> <property name="xaDataSourceClassName"> <value>org.postgresql.xa.PGXADataSource</value> </property> <property name="xaProperties"> <props> <prop key="databaseName">${jdbc.name}</prop> <prop key="serverName">${jdbc.server}</prop> <prop key="portNumber">${jdbc.port}</prop> <prop key="user">${jdbc.username}</prop> <prop key="password">${jdbc.password}</prop> </props> </property> <property name="poolSize"><value>10</value></property> </bean> <bean id="sessionFactory" class="org.springframework.orm.hibernate3.LocalSessionFactoryBean"> <property name="dataSource"> <ref bean="dataSource" /> </property> <property name="mappingResources"> <list> <value>Abc.hbm.xml</value> </list> </property> <property name="hibernateProperties"> <props> <prop key="hibernate.dialect">org.hibernate.dialect.PostgreSQLDialect</prop> <prop key="hibernate.show_sql">on</prop> <prop key="hibernate.format_sql">true</prop> <prop key="hibernate.connection.isolation">3</prop> <prop key="hibernate.current_session_context_class">jta</prop> <prop key="hibernate.transaction.factory_class">org.hibernate.transaction.JTATransactionFactory</prop> <prop key="hibernate.transaction.manager_lookup_class">com.atomikos.icatch.jta.hibernate3.TransactionManagerLookup</prop> <prop key="hibernate.connection.release_mode">auto</prop> <prop key="hibernate.transaction.auto_close_session">true</prop> </props> </property> </bean>  <bean id="userTransactionService" class="com.atomikos.icatch.config.UserTransactionServiceImp" init-method="init" destroy-method="shutdownForce"> <constructor-arg> <props> <prop key="com.atomikos.icatch.service"> com.atomikos.icatch.standalone.UserTransactionServiceFactory </prop> </props> </constructor-arg> </bean>  <bean id="AtomikosTransactionManager" class="com.atomikos.icatch.jta.UserTransactionManager" init-method="init" destroy-method="close" depends-on="userTransactionService"> <property name="forceShutdown" value="false" /> </bean>  <bean id="AtomikosUserTransaction" class="com.atomikos.icatch.jta.UserTransactionImp" depends-on="userTransactionService"> <property name="transactionTimeout" value="300" /> </bean>  <bean id="txManager" class="org.springframework.transaction.jta.JtaTransactionManager" depends-on="userTransactionService"> <property name="transactionManager" ref="AtomikosTransactionManager" /> <property name="userTransaction" ref="AtomikosUserTransaction" /> </bean>  <tx:advice id="txAdvice" transaction-manager="txManager"> <tx:attributes>  <tx:method name="get*" read-only="true" propagation="REQUIRED"/>  <tx:method name="*" propagation="REQUIRED"/> </tx:attributes> </tx:advice> <aop:config> <aop:advisor pointcut="execution(* *.*.AbcDao.*(..))" advice-ref="txAdvice"/> </aop:config>  <bean id="abcDao" class="test.dao.impl.HibernateAbcDao" scope="singleton"> <property name="sessionFactory" ref="sessionFactory"/> </bean>

Read the article

Xcode is not calling asp.net webservice

- by vaibhav

I have oracle database and using webservice i want to insert some records in to it So i created webservice in asp.net as follows public bool PickPill(string Me_id, string Mem_device_id, string Test_datetime, string Creation_id, string PillBayNo) { string Hed_seq_id = Hed_seq_Id(); bool ResultHED = InsHealthEData(Hed_seq_id, Mem_device_id, Me_id, Test_datetime, Creation_id); bool ResultHET = InsHealthETest(Hed_seq_id, PillBayNo, Test_datetime, Creation_id); if (ResultHED == ResultHET == true) return true; else return false; } this function did all data insertion trick for me i tested this service on the local mechine with ip address http:72.44.151.178/PickPillService.asmx then, I see an example on how to attach asp.net web service to iphone apps http://www.devx.com/wireless/Article/43209/0/page/4 then i created simillar code in xcode which has 2 files ConsumePillServiceViewController.m ConsumePillServiceViewController.h file Now, Using Designer of xcode i created 5 textboxes(Me_id,Mem_device_id,Test_datetime,Creation_id,PillBayNo) with all parameters hardcode as our service demands then modify my ConsumePillServiceViewController.h file as follows @interface ConsumePillServiceViewController : UIViewController { //---outlets--- IBOutlet UITextField *Me_id; IBOutlet UITextField *Mem_device_id; IBOutlet UITextField *Test_datetime; IBOutlet UITextField *Creation_id; IBOutlet UITextField *PillBayNo; //---web service access--- NSMutableData *webData; NSMutableString *soapResults; NSURLConnection *conn; } @property (nonatomic, retain) UITextField *Me_id; @property (nonatomic, retain) UITextField *Mem_device_id; @property (nonatomic, retain) UITextField *Test_datetime; @property (nonatomic, retain) UITextField *Creation_id; @property (nonatomic, retain) UITextField *PillBayNo; - (IBAction)buttonClicked:(id)sender; @end and ConsumePillServiceViewController.m as follows import "ConsumePillServiceViewController.h" @implementation ConsumePillServiceViewController @synthesize Me_id; @synthesize Mem_device_id; @synthesize Test_datetime; @synthesize Creation_id; @synthesize PillBayNo; (IBAction)buttonClicked:(id)sender { NSString *soapMsg = @"" "" "" ""; NSString *smMe_id= [soapMsg stringByAppendingString: [NSString stringWithFormat: @"%@",Me_id.text]]; NSString *smMem_device_id= [smMe_id stringByAppendingString: [NSString stringWithFormat: @"%@",Mem_device_id.text]]; NSString *smTest_datetime= [smMem_device_id stringByAppendingString: [NSString stringWithFormat: @"%@",Test_datetime.text]]; NSString *smCreation_id= [smTest_datetime stringByAppendingString: [NSString stringWithFormat: @"%@",Creation_id.text]]; NSString *smPillBayNo= [smCreation_id stringByAppendingString: [NSString stringWithFormat: @"%@",PillBayNo.text]]; NSString *smRestMsg= [smPillBayNo stringByAppendingString: @"" "" ""]; soapMsg=smRestMsg; //---print it to the Debugger Console for verification--- NSLog(soapMsg); NSURL *url = [NSURL URLWithString: //create a URL load request object using instances : @"http://72.44.151.178/PickPillService.asmx"];//of the NSMutableURLRequest and NSURL objects NSMutableURLRequest *req = [NSMutableURLRequest requestWithURL:url]; //opulate the request object with the various headers, such as Content-Type, SOAPAction, and Content-Length. //You also set the HTTP method and HTTP body NSString *msgLength = [NSString stringWithFormat:@"%d", [soapMsg length]]; [req addValue:@"text/xml; charset=utf-8" forHTTPHeaderField:@"Content-Type"]; [req addValue:@"http://tempuri.org/PickPill" forHTTPHeaderField:@"SOAPAction"]; [req addValue:msgLength forHTTPHeaderField:@"Content-Length"]; //---set the HTTP method and body--- [req setHTTPMethod:@"POST"]; [req setHTTPBody: [soapMsg dataUsingEncoding:NSUTF8StringEncoding]]; conn = [[NSURLConnection alloc] initWithRequest:req delegate:self]; //establish the connection with the web service, if (conn) { //you use the NSURLConnection class together with the request object just created webData = [[NSMutableData data] retain];//webData object use to receive incoming data from the web service } }//End of button clicked event -(void) connection:(NSURLConnection *) connection //Recive response didReceiveResponse:(NSURLResponse *) response { [webData setLength: 0]; } -(void) connection:(NSURLConnection *) connection //Repeative call method and append data to webData didReceiveData:(NSData *) data { [webData appendData:data]; } -(void) connection:(NSURLConnection *) connection//If error occure error should be displayed didFailWithError:(NSError *) error { [webData release]; [connection release]; } -(void) connectionDidFinishLoading:(NSURLConnection *) connection { NSLog(@"DONE. Received Bytes: %d", [webData length]); NSString *theXML = [[NSString alloc] initWithBytes: [webData mutableBytes] length:[webData length] encoding:NSUTF8StringEncoding]; //---shows the XML--- NSLog(theXML); [connection release]; [webData release]; } (void)didReceiveMemoryWarning { // Releases the view if it doesn't have a superview. [super didReceiveMemoryWarning]; // Release any cached data, images, etc that aren't in use. } (void)viewDidUnload { // Release any retained subviews of the main view. // e.g. self.myOutlet = nil; } (void)dealloc { [Me_id release]; [Creation_id release]; [Mem_device_id release]; [Test_datetime release]; [PillBayNo release]; [soapResults release]; [super dealloc]; } @end I did all things as shown in the website and when i built application it successfully built but in the debuggin window i see (gdb) continue 2010-03-17 09:09:54.595 ConsumePillService[6546:20b] A00000004303101103/13/2010 07:34:38Hboxdata2 (gdb) continue (gdb) continue (gdb) continue 2010-03-17 09:10:05.411 ConsumePillService[6546:20b] DONE. Received Bytes: 476 2010-03-17 09:10:05.412 ConsumePillService[6546:20b] soap:ServerServer was unable to process request. ---> One or more errors occurred during processing of command. ORA-00936: missing expression It should return me true if all things are ok What is this ORA-00936 error all about as it is not releted with webservice Please help me solving this problem Thanks in advance, Vaibhav Deshpande

Read the article

Customize the SimpleMembership in ASP.NET MVC 4.0

- by thangchung

As we know, .NET 4.5 have come up to us, and come along with a lot of new interesting features as well. Visual Studio 2012 was also introduced some days ago. They made us feel very happy with cool improvement along with us. Performance when loading code editor is very good at the moment (immediate after click on the solution). I explore some of cool features at these days. Some of them like Json.NET integrated in ASP.NET MVC 4.0, improvement on asynchronous action, new lightweight theme on Visual Studio, supporting very good on mobile development, improvement on authentication… I reviewed them, and found out that in this version of .NET Microsoft was not only developed new feature that suggest from community but also focused on improvement performance of existing features or components. Besides that, they also opened source more projects, like Entity Framework, Reactive Extensions, ASP.NET Web Stack… At the moment, I feel Microsoft want to open source more and more their projects. Today, I am going to dive in deep on new SimpleMembership model. It is really good because in this security model, Microsoft actually focus on development needs. As we know, in the past, they introduce some of provider supplied for coding security like MembershipProvider, RoleProvider… I don’t need to talk but everyone that have ever used it know that they were actually hard to use, and not easy to maintain and unit testing. Why? Because every time you inherit it, you need to override all methods inside it. Some people try to abstract it by introduce more method with virtual keyword, and try to implement basic behavior, so in the subclass we only need to override the method that need for their business. But to me, it’s only the way to work around. ASP.NET team and Web Matrix knew about it, so they built the new features based on existing components on .NET framework. And one of component that comes to us is SimpleMembership and SimpleRole. They implemented the Façade pattern on the top of those, and called it is WebSecurity. In the web, we can call WebSecurity anywhere we want, and make a call to inside wrapper of it. I read a lot of them on web blog, on technical news, on MSDN as well. Matthew Osborn had an excellent article about it at his blog. Jon Galloway had an article like this at here. He analyzed why old membership provider not fixed well to ASP.NET MVC and how to get over it. Those are very good to me. It introduced to me about how to doing SimpleMembership on it, how to doing it on new ASP.NET MVC web application. But one thing, those didn’t tell me was how to doing it on existing security model (that mean we already had Users and Roles on legacy system, and how we can integrate it to this system), that’s a reason I will introduce it today. I have spent couples of hours to see what’s inside this, and try to make one example to clarify my concern. And it’s lucky that I can make it working well.The first thing, we need to create new ASP.NET MVC application on Visual Studio 2012. We need to choose Internet type for this web application. ASP.NET MVC actually creates all needs components for the basic membership and basic role. The cool feature is DoNetOpenAuth come along with it that means we can log-in using facebook, twitter or Windows Live if you want. But it’s only for LocalDb, so we need to change it to fix with existing database model on SQL Server. The next step we have to make SimpleMembership can understand which database we use and show it which column need to point to for the ID and UserName. I really like this feature because SimpleMembership on need to know about the ID and UserName, and they don’t care about rest of it. I assume that we have an existing database model like So we will point it in code like The codes for it, we put on InitializeSimpleMembershipAttribute like [AttributeUsage(AttributeTargets.Class | AttributeTargets.Method, AllowMultiple = false, Inherited = true)] public sealed class InitializeSimpleMembershipAttribute : ActionFilterAttribute { private static SimpleMembershipInitializer _initializer; private static object _initializerLock = new object(); private static bool _isInitialized; public override void OnActionExecuting(ActionExecutingContext filterContext) { // Ensure ASP.NET Simple Membership is initialized only once per app start LazyInitializer.EnsureInitialized(ref _initializer, ref _isInitialized, ref _initializerLock); } private class SimpleMembershipInitializer { public SimpleMembershipInitializer() { try { WebSecurity.InitializeDatabaseConnection("DefaultDb", "User", "Id", "UserName", autoCreateTables: true); } catch (Exception ex) { throw new InvalidOperationException("The ASP.NET Simple Membership database could not be initialized. For more information, please see http://go.microsoft.com/fwlink/?LinkId=256588", ex); } } } }And decorating it in the AccountController as below [Authorize] [InitializeSimpleMembership] public class AccountController : ControllerIn this case, assuming that we need to override the ValidateUser to point this to existing User database table, and validate it. We have to add one more class like public class CustomAdminMembershipProvider : SimpleMembershipProvider { // TODO: will do a better way private const string SELECT_ALL_USER_SCRIPT = "select * from [dbo].[User]private where UserName = '{0}'"; private readonly IEncrypting _encryptor; private readonly SimpleSecurityContext _simpleSecurityContext; public CustomAdminMembershipProvider(SimpleSecurityContext simpleSecurityContext) : this(new Encryptor(), new SimpleSecurityContext("DefaultDb")) { } public CustomAdminMembershipProvider(IEncrypting encryptor, SimpleSecurityContext simpleSecurityContext) { _encryptor = encryptor; _simpleSecurityContext = simpleSecurityContext; } public override bool ValidateUser(string username, string password) { if (string.IsNullOrEmpty(username)) { throw new ArgumentException("Argument cannot be null or empty", "username"); } if (string.IsNullOrEmpty(password)) { throw new ArgumentException("Argument cannot be null or empty", "password"); } var hash = _encryptor.Encode(password); using (_simpleSecurityContext) { var users = _simpleSecurityContext.Users.SqlQuery( string.Format(SELECT_ALL_USER_SCRIPT, username)); if (users == null && !users.Any()) { return false; } return users.FirstOrDefault().Password == hash; } } }SimpleSecurityDataContext at here public class SimpleSecurityContext : DbContext { public DbSet<User> Users { get; set; } public SimpleSecurityContext(string connStringName) : base(connStringName) { this.Configuration.LazyLoadingEnabled = true; this.Configuration.ProxyCreationEnabled = false; } protected override void OnModelCreating(DbModelBuilder modelBuilder) { base.OnModelCreating(modelBuilder); modelBuilder.Configurations.Add(new UserMapping()); } }And Mapping for User as below public class UserMapping : EntityMappingBase<User> { public UserMapping() { this.Property(x => x.UserName); this.Property(x => x.DisplayName); this.Property(x => x.Password); this.Property(x => x.Email); this.ToTable("User"); } }One important thing, you need to modify the web.config to point to our customize SimpleMembership <membership defaultProvider="AdminMemberProvider" userIsOnlineTimeWindow="15"> <providers> <clear/> <add name="AdminMemberProvider" type="CIK.News.Web.Infras.Security.CustomAdminMembershipProvider, CIK.News.Web.Infras" /> </providers> </membership> <roleManager enabled="false"> <providers> <clear /> <add name="AdminRoleProvider" type="CIK.News.Web.Infras.Security.AdminRoleProvider, CIK.News.Web.Infras" /> </providers> </roleManager>The good thing at here is we don’t need to modify the code on AccountController. We only need to modify on SimpleMembership and Simple Role (if need). Now build all solutions, run it. We should see a screen like thisIf I login to Twitter button at the bottom of this page, we will be transfer to twitter authentication pageYou have to waiting for a moment Afterwards it will transfer you back to your admin screenYou can find all source codes at my MSDN code. I will really happy if you guys feel free to put some comments as below. It will be helpful to improvement my code in the future. Thank for all your readings.

Read the article

Silverlight Recruiting Application Part 6 - Adding an Interview Scheduling Module/View

Between the last post and this one I went ahead and carried the ideas for the Jobs module and view into the Applicants module and view- they're both doing more or less the same thing, except with different objects being at their core. Made for an easy cut-and-paste operation with a few items being switched from one to another. Now that we have the ability to add postings and applicants, wouldn't it be nice if we could schedule an interview? Of course it would! Scheduling Module I think you get the drift from previous posts that these project structures start looking somewhat similar. The interview scheduling module is no different than the rest- it gets a SchedulingModule.cs file at the root that inherits from IModule, and there is a single SchedulerView.xsml and SchedulerViewModel.cs setup for our V+VM. We have one unique concern as we enter into this- RadScheduler deals with AppointmentsSource, not ItemsSource, so there are some special considerations to take into account when planning this module. First, I need something which inherits from AppointmentBase. This is the core of the RadScheduler appointment, and if you are planning to do any form of custom appointment, you'll want it to inherit from this. Then you can add-on functionality as needed. Here is my addition to the mix, the InterviewAppointment: 01.public class InterviewAppointment : AppointmentBase 02.{ 03. private int _applicantID; 04. public int ApplicantID 05. { 06. get { return this._applicantID; } 07. set 08. { 09. if (_applicantID != value) 10. { 11. _applicantID = value; 12. OnPropertyChanged("ApplicantID"); 13. } 14. } 15. } 16. 17. private int _postingID; 18. public int PostingID 19. { 20. get { return _postingID; } 21. set 22. { 23. if (_postingID != value) 24. { 25. _postingID = value; 26. OnPropertyChanged("PostingID"); 27. } 28. } 29. } 30. 31. private string _body; 32. public string Body 33. { 34. get { return _body; } 35. set 36. { 37. if (_body != value) 38. { 39. _body = value; 40. OnPropertyChanged("Body"); 41. } 42. } 43. } 44. 45. private int _interviewID; 46. public int InterviewID 47. { 48. get { return _interviewID; } 49. set 50. { 51. if (_interviewID != value) 52. { 53. _interviewID = value; 54. OnPropertyChanged("InterviewID"); 55. } 56. } 57. } 58. 59. public override IAppointment Copy() 60. { 61. IAppointment appointment = new InterviewAppointment(); 62. appointment.CopyFrom(this); 63. return appointment; 64. } 65. 66. public override void CopyFrom(IAppointment other) 67. { 68. base.CopyFrom(other); 69. var appointment = other as InterviewAppointment; 70. if (appointment != null) 71. { 72. ApplicantID = appointment.ApplicantID; 73. PostingID = appointment.PostingID; 74. Body = appointment.Body; 75. InterviewID = appointment.InterviewID; 76. } 77. } 78.} Nothing too exciting going on here, we just make sure that our custom fields are persisted (specifically set in CopyFrom at the bottom) and notifications are fired- otherwise this ends up exactly like the standard appointment as far as interactions, etc. But if we've got custom appointment items... that also means we need to customize what our appointment dialog window will look like. Customizing the Edit Appointment Dialog This initially sounds a lot more intimidating than it really is. The first step here depends on what you're dealing with for theming, but for ease of everything I went ahead and extracted my templates in Blend for RadScheduler so I could modify it as I pleased. For the faint of heart, the RadScheduler template is a few thousand lines of goodness since there are some very complex things going on in that control. I've gone ahead and trimmed down the template parts I don't need as much as possible, so what is left is all that is relevant to the Edit Appointment Dialog. Here's the resulting Xaml, with line numbers, so I can explain further: 001.<UserControl.Resources> 002.  003. <helpers:DataContextProxy x:Key="DataContextProxy" /> 004. 005. <telerik:Windows7Theme x:Key="Theme" /> 006. <SolidColorBrush x:Key="DialogWindowBackground" 007. Color="White" /> 008. <SolidColorBrush x:Key="CategorySelectorBorderBrush" 009. Color="#FFB1B1B1" /> 010. <LinearGradientBrush x:Key="RadToolBar_InnerBackground" 011. EndPoint="0.5,1" 012. StartPoint="0.5,0"> 013. <GradientStop Color="#FFFDFEFF" 014. Offset="0" /> 015. <GradientStop Color="#FFDDE9F7" 016. Offset="1" /> 017. <GradientStop Color="#FFE6F0FA" 018. Offset="0.5" /> 019. <GradientStop Color="#FFDCE6F4" 020. Offset="0.5" /> 021. </LinearGradientBrush> 022. <Style x:Key="FormElementTextBlockStyle" 023. TargetType="TextBlock"> 024. <Setter Property="HorizontalAlignment" 025. Value="Right" /> 026. <Setter Property="VerticalAlignment" 027. Value="Top" /> 028. <Setter Property="Margin" 029. Value="15, 15, 0, 2" /> 030. </Style> 031. <Style x:Key="FormElementStyle" 032. TargetType="FrameworkElement"> 033. <Setter Property="Margin" 034. Value="10, 10, 0, 2" /> 035. </Style> 036. <SolidColorBrush x:Key="GenericShallowBorderBrush" 037. Color="#FF979994" /> 038. <telerik:BooleanToVisibilityConverter x:Key="BooleanToVisibilityConverter" /> 039. <telerikScheduler:ImportanceToBooleanConverter x:Key="ImportanceToBooleanConverter" /> 040. <telerikScheduler:NullToVisibilityConverter x:Key="NullToVisibilityConverter" /> 041. <telerikScheduler:InvertedNullToVisibilityConverter x:Key="InvertedNullToVisibilityConverter" /> 042. <scheduler:ResourcesSeparatorConverter x:Key="ResourcesSeparatorConverter" /> 043. <DataTemplate x:Key="IconDataEditTemplate"> 044. <Image Source="/Telerik.Windows.Controls.Scheduler;component/Themes/Office/Images/cal.png" 045. Margin="3,3,0,0" 046. Width="16" 047. Height="16" /> 048. </DataTemplate> 049. <DataTemplate x:Key="SingleSelectionTemplate"> 050. <Grid VerticalAlignment="Stretch" 051. HorizontalAlignment="Stretch"> 052. <Grid.RowDefinitions> 053. <RowDefinition Height="Auto" /> 054. </Grid.RowDefinitions> 055. <Grid.ColumnDefinitions> 056. <ColumnDefinition Width="Auto" 057. MinWidth="84" /> 058. <ColumnDefinition Width="Auto" 059. MinWidth="200" /> 060. </Grid.ColumnDefinitions> 061. <TextBlock x:Name="SelectionNameLabel" 062. Margin="0,13,4,2" 063. Text="{Binding ResourceType.DisplayName}" 064. Style="{StaticResource FormElementTextBlockStyle}" 065. Grid.Column="0" /> 066. <telerikInput:RadComboBox ItemsSource="{Binding ResourceItems}" 067. Width="185" 068. Margin="5,10,20,2" 069. HorizontalAlignment="Left" 070. Grid.Column="1" 071. ClearSelectionButtonVisibility="Visible" 072. ClearSelectionButtonContent="Clear All" 073. DisplayMemberPath="Resource.DisplayName" 074. telerik:StyleManager.Theme="{StaticResource Theme}" 075. SelectedItem="{Binding SelectedItem, Mode=TwoWay}" /> 076. </Grid> 077. </DataTemplate> 078. <DataTemplate x:Key="MultipleSelectionTemplate"> 079. <Grid VerticalAlignment="Stretch" 080. HorizontalAlignment="Stretch"> 081. <Grid.RowDefinitions> 082. <RowDefinition Height="Auto" /> 083. </Grid.RowDefinitions> 084. <Grid.ColumnDefinitions> 085. <ColumnDefinition Width="Auto" 086. MinWidth="84" /> 087. <ColumnDefinition Width="Auto" 088. MinWidth="200" /> 089. </Grid.ColumnDefinitions> 090. <TextBlock x:Name="SelectionNameLabel" 091. Grid.Column="0" 092. Text="{Binding ResourceType.DisplayName}" 093. Margin="0,13,4,2" 094. Style="{StaticResource FormElementTextBlockStyle}" /> 095. <telerikInput:RadComboBox Grid.Column="1" 096. Width="185" 097. HorizontalAlignment="Left" 098. Margin="5,10,20,2" 099. ItemsSource="{Binding ResourceItems}" 100. SelectedIndex="{Binding SelectedIndex, Mode=TwoWay}" 101. ClearSelectionButtonVisibility="Visible" 102. ClearSelectionButtonContent="Clear All" 103. telerik:StyleManager.Theme="{StaticResource Theme}"> 104. <telerikInput:RadComboBox.ItemTemplate> 105. <DataTemplate> 106. <Grid HorizontalAlignment="Stretch" 107. VerticalAlignment="Stretch"> 108. <CheckBox VerticalAlignment="Center" 109. HorizontalContentAlignment="Stretch" 110. VerticalContentAlignment="Center" 111. IsChecked="{Binding IsChecked, Mode=TwoWay}" 112. Content="{Binding Resource.DisplayName}"> 113. <CheckBox.ContentTemplate> 114. <DataTemplate> 115. <TextBlock HorizontalAlignment="Stretch" 116. VerticalAlignment="Stretch" 117. Text="{Binding Content, RelativeSource={RelativeSource TemplatedParent}}" /> 118. </DataTemplate> 119. </CheckBox.ContentTemplate> 120. </CheckBox> 121. </Grid> 122. </DataTemplate> 123. </telerikInput:RadComboBox.ItemTemplate> 124. </telerikInput:RadComboBox> 125. </Grid> 126. </DataTemplate> 127. <scheduler:ResourceTypeTemplateSelector x:Key="ItemTemplateSelector" 128. MultipleSelectionTemplate="{StaticResource MultipleSelectionTemplate}" 129. SingleSelectionTemplate="{StaticResource SingleSelectionTemplate}" /> 130.  131. 132. <ControlTemplate x:Key="EditAppointmentTemplate" 133. TargetType="telerikScheduler:AppointmentDialogWindow"> 134. <StackPanel Background="{TemplateBinding Background}" 135. UseLayoutRounding="True"> 136. <StackPanel Grid.Row="0" 137. Orientation="Horizontal" 138. Background="{StaticResource RadToolBar_InnerBackground}" 139. Grid.ColumnSpan="2" 140. Height="0"> 141.  142. <Border Margin="1,1,0,0" 143. Background="#50000000" 144. HorizontalAlignment="Left" 145. VerticalAlignment="Center" 146. Width="2" 147. Height="16"> 148. <Border Margin="0,0,1,1" 149. Background="#80FFFFFF" 150. HorizontalAlignment="Left" 151. Width="1" /> 152. </Border> 153. <Border Margin="1,1,0,0" 154. Background="#50000000" 155. HorizontalAlignment="Left" 156. VerticalAlignment="Center" 157. Width="2" 158. Height="16"> 159. <Border Margin="0,0,1,1" 160. Background="#80FFFFFF" 161. HorizontalAlignment="Left" 162. Width="1" /> 163. </Border> 164. <TextBlock telerik:LocalizationManager.ResourceKey="ShowAs" 165. VerticalAlignment="Center" 166. Margin="5,0,0,0" /> 167. <telerikInput:RadComboBox ItemsSource="{TemplateBinding TimeMarkers}" 168. Width="100" 169. Height="20" 170. VerticalAlignment="Center" 171. Margin="5,0,0,0" 172. ClearSelectionButtonVisibility="Visible" 173. ClearSelectionButtonContent="Clear" 174. SelectedItem="{Binding TimeMarker,RelativeSource={RelativeSource TemplatedParent},Mode=TwoWay}" 175. telerik:StyleManager.Theme="{StaticResource Theme}"> 176. <telerikInput:RadComboBox.ItemTemplate> 177. <DataTemplate> 178. <StackPanel Orientation="Horizontal"> 179. <Rectangle Fill="{Binding TimeMarkerBrush}" 180. Margin="2" 181. Width="12" 182. Height="12" /> 183. <TextBlock Text="{Binding TimeMarkerName}" 184. Margin="2" /> 185. </StackPanel> 186. </DataTemplate> 187. </telerikInput:RadComboBox.ItemTemplate> 188. </telerikInput:RadComboBox> 189. <telerik:RadToggleButton x:Name="High" 190. BorderThickness="0" 191. Background="{StaticResource RadToolBar_InnerBackground}" 192. DataContext="{TemplateBinding EditedAppointment}" 193. telerik:StyleManager.Theme="{StaticResource Theme}" 194. IsChecked="{Binding Importance,Mode=TwoWay, Converter={StaticResource ImportanceToBooleanConverter},ConverterParameter=High}" 195. Margin="2,2,0,2" 196. Width="23" 197. Height="23" 198. HorizontalContentAlignment="Center" 199. ToolTipService.ToolTip="High importance" 200. CommandParameter="High" 201. Command="telerikScheduler:RadSchedulerCommands.SetAppointmentImportance"> 202. <StackPanel HorizontalAlignment="Center"> 203. <Path Stretch="Fill" 204. Height="10" 205. HorizontalAlignment="Center" 206. VerticalAlignment="Top" 207. Width="5.451" 208. Data="M200.39647,58.840393 C200.39337,58.336426 201.14566,57.683922 202.56244,57.684292 C204.06589,57.684685 204.73764,58.357765 204.72783,58.992363 C205.04649,61.795574 203.04713,64.181099 202.47388,66.133446 C201.93753,64.154961 199.9471,61.560352 200.39647,58.840393 z"> 209. <Path.Fill> 210. <LinearGradientBrush EndPoint="1.059,0.375" 211. StartPoint="-0.457,0.519"> 212. <GradientStop Color="#FFFF0606" 213. Offset="0.609" /> 214. <GradientStop Color="#FFBF0303" 215. Offset="0.927" /> 216. </LinearGradientBrush> 217. </Path.Fill> 218. </Path> 219. <Ellipse Height="3" 220. HorizontalAlignment="Center" 221. Margin="0,-1,0,0" 222. VerticalAlignment="Top" 223. Width="3"> 224. <Ellipse.Fill> 225. <RadialGradientBrush> 226. <GradientStop Color="#FFFF0606" 227. Offset="0" /> 228. <GradientStop Color="#FFBF0303" 229. Offset="1" /> 230. </RadialGradientBrush> 231. </Ellipse.Fill> 232. </Ellipse> 233. </StackPanel> 234. </telerik:RadToggleButton> 235. <telerik:RadToggleButton x:Name="Low" 236. HorizontalContentAlignment="Center" 237. BorderThickness="0" 238. Background="{StaticResource RadToolBar_InnerBackground}" 239. DataContext="{TemplateBinding EditedAppointment}" 240. IsChecked="{Binding Importance,Mode=TwoWay, Converter={StaticResource ImportanceToBooleanConverter},ConverterParameter=Low}" 241. Margin="0,2,0,2" 242. Width="23" 243. Height="23" 244. ToolTipService.ToolTip="Low importance" 245. CommandParameter="Low" 246. telerik:StyleManager.Theme="{StaticResource Theme}" 247. Command="telerikScheduler:RadSchedulerCommands.SetAppointmentImportance"> 248. <Path Stretch="Fill" 249. Height="12" 250. HorizontalAlignment="Center" 251. VerticalAlignment="Top" 252. Width="9" 253. Data="M222.40353,60.139881 L226.65768,60.139843 L226.63687,67.240196 L229.15347,67.240196 L224.37816,71.394943 L219.65274,67.240196 L222.37572,67.219345 z" 254. Stroke="#FF0365A7"> 255. <Path.Fill> 256. <LinearGradientBrush EndPoint="1.059,0.375" 257. StartPoint="-0.457,0.519"> 258. <GradientStop Color="#FFBBE4FF" /> 259. <GradientStop Color="#FF024572" 260. Offset="0.836" /> 261. <GradientStop Color="#FF43ADF4" 262. Offset="0.466" /> 263. </LinearGradientBrush> 264. </Path.Fill> 265. </Path> 266. </telerik:RadToggleButton> 267. </StackPanel > 268. <Border DataContext="{TemplateBinding EditedAppointment}" 269. Background="{Binding Category.CategoryBrush}" 270. Visibility="{Binding Category,Converter={StaticResource NullToVisibilityConverter}}" 271. CornerRadius="3" 272. Height="20" 273. Margin="5,10,5,0"> 274. <TextBlock Text="{Binding Category.DisplayName}" 275. VerticalAlignment="Center" 276. Margin="5,0,0,0" /> 277. </Border> 278. <Grid VerticalAlignment="Stretch" 279. HorizontalAlignment="Stretch" 280. DataContext="{TemplateBinding EditedAppointment}" 281. Background="{TemplateBinding Background}"> 282. <Grid.RowDefinitions> 283. <RowDefinition Height="Auto" /> 284. <RowDefinition Height="Auto" /> 285. <RowDefinition Height="Auto" /> 286. <RowDefinition Height="Auto" /> 287. <RowDefinition Height="Auto" /> 288. <RowDefinition Height="Auto" /> 289. <RowDefinition Height="Auto" /> 290. <RowDefinition Height="Auto" /> 291. <RowDefinition Height="Auto" /> 292. <RowDefinition Height="Auto" /> 293. </Grid.RowDefinitions> 294. <Grid.ColumnDefinitions> 295. <ColumnDefinition Width="Auto" 296. MinWidth="100" /> 297. <ColumnDefinition Width="Auto" 298. MinWidth="200" /> 299. </Grid.ColumnDefinitions> 300.  301. <TextBlock x:Name="SubjectLabel" 302. Grid.Row="0" 303. Grid.Column="0" 304. Margin="0,15,0,2" 305. telerik:LocalizationManager.ResourceKey="Subject" 306. Style="{StaticResource FormElementTextBlockStyle}" /> 307. <TextBox x:Name="Subject" 308. Grid.Row="0" 309. Grid.Column="1" 310. MinHeight="22" 311. Padding="4 2" 312. Width="340" 313. HorizontalAlignment="Left" 314. Text="{Binding Subject, Mode=TwoWay}" 315. MaxLength="255" 316. telerik:StyleManager.Theme="{StaticResource Theme}" 317. Margin="10,12,20,2" /> 318.  319. <TextBlock x:Name="DescriptionLabel" 320. Grid.Row="1" 321. Grid.Column="0" 322. Margin="0,13,0,2" 323. telerik:LocalizationManager.ResourceKey="Body" 324. Style="{StaticResource FormElementTextBlockStyle}" /> 325. <TextBox x:Name="Body" 326. VerticalAlignment="top" 327. Grid.Row="1" 328. Grid.Column="1" 329. Height="Auto" 330. MaxHeight="82" 331. Width="340" 332. HorizontalAlignment="Left" 333. MinHeight="22" 334. Padding="4 2" 335. TextWrapping="Wrap" 336. telerik:StyleManager.Theme="{StaticResource Theme}" 337. Text="{Binding Body, Mode=TwoWay}" 338. AcceptsReturn="true" 339. Margin="10,10,20,2" 340. HorizontalScrollBarVisibility="Auto" 341. VerticalScrollBarVisibility="Auto" /> 342.  343. <TextBlock x:Name="StartDateLabel" 344. Grid.Row="2" 345. Grid.Column="0" 346. Margin="0,13,0,2" 347. telerik:LocalizationManager.ResourceKey="StartTime" 348. Style="{StaticResource FormElementTextBlockStyle}" /> 349. <telerikScheduler:DateTimePicker x:Name="StartDateTime" 350. Height="22" 351. Grid.Row="2" 352. Grid.Column="1" 353. HorizontalAlignment="Left" 354. Margin="10,10,20,2" 355. Style="{StaticResource FormElementStyle}" 356. SelectedDateTime="{Binding Start, Mode=TwoWay}" 357. telerikScheduler:StartEndDatePicker.EndPicker="{Binding ElementName=EndDateTime}" 358. IsTabStop="False" 359. IsEnabled="False" /> 360. <TextBlock x:Name="EndDateLabel" 361. Grid.Row="3" 362. Grid.Column="0" 363. Margin="0,13,0,2" 364. telerik:LocalizationManager.ResourceKey="EndTime" 365. Style="{StaticResource FormElementTextBlockStyle}" /> 366. <telerikScheduler:DateTimePicker x:Name="EndDateTime" 367. Height="22" 368. Grid.Row="3" 369. Grid.Column="1" 370. HorizontalAlignment="Left" 371. Margin="10,10,20,2" 372. Style="{StaticResource FormElementStyle}" 373. IsTabStop="False" 374. IsEnabled="False" 375. SelectedDateTime="{Binding End, Mode=TwoWay}" /> 376.  377. <CheckBox x:Name="AllDayEventCheckbox" 378. IsChecked="{Binding IsAllDayEvent, Mode=TwoWay}" 379. Grid.Row="4" 380. Grid.Column="1" 381. Margin="10,10,20,2" 382. HorizontalAlignment="Left" 383. telerik:StyleManager.Theme="{StaticResource Theme}" 384. telerik:LocalizationManager.ResourceKey="AllDayEvent"> 385. <telerik:CommandManager.InputBindings> 386. <telerik:InputBindingCollection> 387. <telerik:MouseBinding Command="telerikScheduler:RadSchedulerCommands.ChangeTimePickersVisibility" 388. Gesture="LeftClick" /> 389. </telerik:InputBindingCollection> 390. </telerik:CommandManager.InputBindings> 391. </CheckBox> 392. <Grid Grid.Row="5" 393. Grid.ColumnSpan="2"> 394. <Grid.ColumnDefinitions> 395. <ColumnDefinition Width="Auto" 396. MinWidth="100" /> 397. <ColumnDefinition Width="Auto" 398. MinWidth="200" /> 399. </Grid.ColumnDefinitions> 400. <Grid.RowDefinitions> 401. <RowDefinition Height="Auto" /> 402. <RowDefinition Height="Auto" /> 403. </Grid.RowDefinitions> 404. <TextBlock Text="Applicant" 405. Margin="0,13,0,2" 406. Style="{StaticResource FormElementTextBlockStyle}" /> 407. <telerikInput:RadComboBox IsEditable="False" 408. Grid.Column="1" 409. Height="24" 410. VerticalAlignment="Center" 411. ItemsSource="{Binding Source={StaticResource DataContextProxy}, Path=DataSource.ApplicantList}" 412. SelectedValue="{Binding ApplicantID, Mode=TwoWay}" 413. SelectedValuePath="ApplicantID" 414. DisplayMemberPath="FirstName" /> 415. 416. <TextBlock Text="Job" 417. Margin="0,13,0,2" 418. Grid.Row="1" 419. Style="{StaticResource FormElementTextBlockStyle}" /> 420. <telerikInput:RadComboBox IsEditable="False" 421. Grid.Column="1" 422. Grid.Row="1" 423. Height="24" 424. VerticalAlignment="Center" 425. ItemsSource="{Binding Source={StaticResource DataContextProxy}, Path=DataSource.JobsList}" 426. SelectedValue="{Binding PostingID, Mode=TwoWay}" 427. SelectedValuePath="PostingID" 428. DisplayMemberPath="JobTitle"/> 429. </Grid> 430.  431. <Grid x:Name="ResourcesLayout" 432. Grid.Row="7" 433. Grid.Column="0" 434. Grid.ColumnSpan="2" 435. MaxHeight="130" 436. Margin="20,5,20,0"> 437. <Border Margin="0" 438. BorderThickness="1" 439. BorderBrush="{StaticResource GenericShallowBorderBrush}" 440. Visibility="{Binding ElementName=ResourcesScrollViewer, Path=ComputedVerticalScrollBarVisibility}"></Border> 441. <ScrollViewer x:Name="ResourcesScrollViewer" 442. IsTabStop="false" 443. Grid.Row="6" 444. Grid.Column="0" 445. Grid.ColumnSpan="2" 446. Margin="1" 447. telerik:StyleManager.Theme="{StaticResource Theme}" 448. VerticalScrollBarVisibility="Auto"> 449. <scheduler:ResourcesItemsControl x:Name="PART_Resources" 450. HorizontalAlignment="Left" 451. Padding="0,2,0,5" 452. IsTabStop="false" 453. ItemsSource="{TemplateBinding ResourceTypeModels}" 454. ItemTemplateSelector="{StaticResource ItemTemplateSelector}" /> 455. </ScrollViewer> 456. </Grid> 457. <StackPanel x:Name="FooterControls" 458. Margin="5 10 10 10" 459. Grid.Row="8" 460. Grid.Column="1" 461. HorizontalAlignment="Left" 462. Orientation="Horizontal"> 463. <telerik:RadButton x:Name="OKButton" 464. Margin="5" 465. Padding="10 0" 466. MinWidth="80" 467. Command="telerikScheduler:RadSchedulerCommands.SaveAppointment" 468. telerik:StyleManager.Theme="{StaticResource Theme}" 469. telerikNavigation:RadWindow.ResponseButton="Accept" 470. telerik:LocalizationManager.ResourceKey="SaveAndCloseCommandText"> 471. </telerik:RadButton> 472. <telerik:RadButton x:Name="CancelButton" 473. Margin="5" 474. Padding="10 0" 475. MinWidth="80" 476. telerik:LocalizationManager.ResourceKey="Cancel" 477. telerik:StyleManager.Theme="{StaticResource Theme}" 478. telerikNavigation:RadWindow.ResponseButton="Cancel" 479. Command="telerik:WindowCommands.Close"> 480. </telerik:RadButton> 481. </StackPanel> 482. </Grid> 483. <vsm:VisualStateManager.VisualStateGroups> 484. <vsm:VisualStateGroup x:Name="RecurrenceRuleState"> 485. <vsm:VisualState x:Name="RecurrenceRuleIsNull"> 486. <Storyboard> 487. <ObjectAnimationUsingKeyFrames Storyboard.TargetName="StartDateTime" 488. Storyboard.TargetProperty="IsEnabled" 489. Duration="0"> 490. <DiscreteObjectKeyFrame KeyTime="0" 491. Value="True" /> 492. </ObjectAnimationUsingKeyFrames> 493. <ObjectAnimationUsingKeyFrames Storyboard.TargetName="EndDateTime" 494. Storyboard.TargetProperty="IsEnabled" 495. Duration="0"> 496. <DiscreteObjectKeyFrame KeyTime="0" 497. Value="True" /> 498. </ObjectAnimationUsingKeyFrames> 499. <ObjectAnimationUsingKeyFrames Storyboard.TargetName="AllDayEventCheckbox" 500. Storyboard.TargetProperty="IsEnabled" 501. Duration="0"> 502. <DiscreteObjectKeyFrame KeyTime="0" 503. Value="True" /> 504. </ObjectAnimationUsingKeyFrames> 505. </Storyboard> 506. </vsm:VisualState> 507. <vsm:VisualState x:Name="RecurrenceRuleIsNotNull"> 508. <Storyboard> 509. <ObjectAnimationUsingKeyFrames Storyboard.TargetName="StartDateTime" 510. Storyboard.TargetProperty="IsEnabled" 511. Duration="0"> 512. <DiscreteObjectKeyFrame KeyTime="0" 513. Value="False" /> 514. </ObjectAnimationUsingKeyFrames> 515. <ObjectAnimationUsingKeyFrames Storyboard.TargetName="EndDateTime" 516. Storyboard.TargetProperty="IsEnabled" 517. Duration="0"> 518. <DiscreteObjectKeyFrame KeyTime="0" 519. Value="False" /> 520. </ObjectAnimationUsingKeyFrames> 521. <ObjectAnimationUsingKeyFrames Storyboard.TargetName="AllDayEventCheckbox" 522. Storyboard.TargetProperty="IsEnabled" 523. Duration="0"> 524. <DiscreteObjectKeyFrame KeyTime="0" 525. Value="False" /> 526. </ObjectAnimationUsingKeyFrames> 527. </Storyboard> 528. </vsm:VisualState> 529. </vsm:VisualStateGroup> 530. </vsm:VisualStateManager.VisualStateGroups> 531. </StackPanel> 532. </ControlTemplate> 533. <DataTemplate x:Key="AppointmentDialogWindowHeaderDataTemplate"> 534. <StackPanel Orientation="Horizontal" 535. MaxWidth="400"> 536. <TextBlock telerik:LocalizationManager.ResourceKey="Event" 537. Visibility="{Binding Appointment.IsAllDayEvent, Converter={StaticResource BooleanToVisibilityConverter}}" /> 538. <TextBlock telerik:LocalizationManager.ResourceKey="Appointment" 539. Visibility="{Binding Appointment.IsAllDayEvent, Converter={StaticResource InvertedBooleanToVisibilityConverter}}" /> 540. <TextBlock Text=" - " /> 541. <TextBlock x:Name="SubjectTextBlock" 542. Visibility="{Binding Appointment.Subject, Converter={StaticResource NullToVisibilityConverter}}" 543. Text="{Binding Appointment.Subject}" /> 544. <TextBlock telerik:LocalizationManager.ResourceKey="Untitled" 545. Visibility="{Binding Appointment.Subject, Converter={StaticResource InvertedNullToVisibilityConverter}}" /> 546. </StackPanel> 547. </DataTemplate> 548. <Style x:Key="EditAppointmentStyle" 549. TargetType="telerikScheduler:AppointmentDialogWindow"> 550. <Setter Property="IconTemplate" 551. Value="{StaticResource IconDataEditTemplate}" /> 552. <Setter Property="HeaderTemplate" 553. Value="{StaticResource AppointmentDialogWindowHeaderDataTemplate}" /> 554. <Setter Property="Background" 555. Value="{StaticResource DialogWindowBackground}" /> 556. <Setter Property="Template" 557. Value="{StaticResource EditAppointmentTemplate}" /> 558. </Style> 559.</UserControl.Resources> The first line there is the DataContextProxy I mentioned previously- we use that again to work a bit of magic in this template. Where we start getting into the dialog in question is line 132, but line 407 is where things start getting interesting. The ItemsSource is pointing at a list that exists in my ViewModel (or code-behind, if it is used as a DataContext), the SelectedValue is the item I am actually binding from the applicant (note the TwoWay binding), and SelectedValuePath and DisplayMemberPath ensure the proper applicant is being displayed from the collection. You will also see similar starting on line 420 where I do the same for the Jobs we'll be displaying. Just to wrap-up the Xaml, here's the RadScheduler declaraction that ties this all together and will be the main focus of our view: 01.<telerikScheduler:RadScheduler x:Name="xJobsScheduler" 02. Grid.Row="1" 03. Grid.Column="1" 04. Width="800" 05. MinWidth="600" 06. Height="500" 07. MinHeight="300" 08. AppointmentsSource="{Binding Interviews}" 09. EditAppointmentStyle="{StaticResource EditAppointmentStyle}" 10. command:AppointmentAddedEventClass.Command="{Binding AddAppointmentCommand}" 11. command:ApptCreatedEventClass.Command="{Binding ApptCreatingCommand}" 12. command:ApptEditedEventClass.Command="{Binding ApptEditedCommand}" 13. command:ApptDeletedEventClass.Command="{Binding ApptDeletedCommand}"> 14.</telerikScheduler:RadScheduler> Now, we get to the ViewModel and what it takes to get that rigged up. And for those of you who remember the jobs post, those command:s in the Xaml are pointing to attached behavior commands that reproduce the respective events. This becomes very handy when we're setting up the code-behind version. ;) ViewModel I've been liking this approach so far, so I'm going to put the entire ViewModel here and then go into the lines of interest. Of course, feel free to ask me questions about anything that isn't clear (by line number, ideally) so I can help out if I have missed anything important: 001.public class SchedulerViewModel : ViewModelBase 002.{ 003. private readonly IEventAggregator eventAggregator; 004. private readonly IRegionManager regionManager; 005. 006. public RecruitingContext context; 007. 008. private ObservableItemCollection<InterviewAppointment> _interviews = new ObservableItemCollection<InterviewAppointment>(); 009. public ObservableItemCollection<InterviewAppointment> Interviews 010. { 011. get { return _interviews; } 012. set 013. { 014. if (_interviews != value) 015. { 016. _interviews = value; 017. NotifyChanged("Interviews"); 018. } 019. } 020. } 021. 022. private QueryableCollectionView _jobsList; 023. public QueryableCollectionView JobsList 024. { 025. get { return this._jobsList; } 026. set 027. { 028. if (this._jobsList != value) 029. { 030. this._jobsList = value; 031. this.NotifyChanged("JobsList"); 032. } 033. } 034. } 035. 036. private QueryableCollectionView _applicantList; 037. public QueryableCollectionView ApplicantList 038. { 039. get { return _applicantList; } 040. set 041. { 042. if (_applicantList != value) 043. { 044. _applicantList = value; 045. NotifyChanged("ApplicantList"); 046. } 047. } 048. } 049. 050. public DelegateCommand<object> AddAppointmentCommand { get; set; } 051. public DelegateCommand<object> ApptCreatingCommand { get; set; } 052. public DelegateCommand<object> ApptEditedCommand { get; set; } 053. public DelegateCommand<object> ApptDeletedCommand { get; set; } 054. 055. public SchedulerViewModel(IEventAggregator eventAgg, IRegionManager regionmanager) 056. { 057. // set Unity items 058. this.eventAggregator = eventAgg; 059. this.regionManager = regionmanager; 060. 061. // load our context 062. context = new RecruitingContext(); 063. LoadOperation<Interview> loadOp = context.Load(context.GetInterviewsQuery()); 064. loadOp.Completed += new EventHandler(loadOp_Completed); 065. 066. this._jobsList = new QueryableCollectionView(context.JobPostings); 067. context.Load(context.GetJobPostingsQuery()); 068. 069. this._applicantList = new QueryableCollectionView(context.Applicants); 070. context.Load(context.GetApplicantsQuery()); 071. 072. AddAppointmentCommand = new DelegateCommand<object>(this.AddAppt); 073. ApptCreatingCommand = new DelegateCommand<object>(this.ApptCreating); 074. ApptEditedCommand = new DelegateCommand<object>(this.ApptEdited); 075. ApptDeletedCommand = new DelegateCommand<object>(this.ApptDeleted); 076. 077. } 078. 079. void loadOp_Completed(object sender, EventArgs e) 080. { 081. LoadOperation loadop = sender as LoadOperation; 082. 083. foreach (var ent in loadop.Entities) 084. { 085. _interviews.Add(EntityToAppointment(ent as Interview)); 086. } 087. } 088. 089. #region Appointment Adding 090. 091. public void AddAppt(object obj) 092. { 093. // now we have a new InterviewAppointment to add to our QCV :) 094. InterviewAppointment newInterview = obj as InterviewAppointment; 095. 096. this.context.Interviews.Add(AppointmentToEntity(newInterview)); 097. this.context.SubmitChanges((s) => 098. { 099. ActionHistory myAction = new ActionHistory(); 100. myAction.InterviewID = newInterview.InterviewID; 101. myAction.PostingID = newInterview.PostingID; 102. myAction.ApplicantID = newInterview.ApplicantID; 103. myAction.Description = String.Format("Interview with {0} has been created by {1}", newInterview.ApplicantID.ToString(), "default user"); 104. myAction.TimeStamp = DateTime.Now; 105. eventAggregator.GetEvent<AddActionEvent>().Publish(myAction); 106. } 107. , null); 108. } 109. 110. public void ApptCreating(object obj) 111. { 112. // handled in the behavior, just a placeholder to ensure it runs :) 113. } 114. 115. #endregion 116. 117. #region Appointment Editing 118. 119. public void ApptEdited(object obj) 120. { 121. Interview editedInterview = (from x in context.Interviews 122. where x.InterviewID == (obj as InterviewAppointment).InterviewID 123. select x).SingleOrDefault(); 124. 125. CopyAppointmentEdit(editedInterview, obj as InterviewAppointment); 126. 127. context.SubmitChanges((s) => { 128. ActionHistory myAction = new ActionHistory(); 129. myAction.InterviewID = editedInterview.InterviewID; 130. myAction.PostingID = editedInterview.PostingID; 131. myAction.ApplicantID = editedInterview.ApplicantID; 132. myAction.Description = String.Format("Interview with {0} has been modified by {1}", editedInterview.ApplicantID.ToString(), "default user"); 133. myAction.TimeStamp = DateTime.Now; 134. eventAggregator.GetEvent<AddActionEvent>().Publish(myAction); } 135. , null); 136. } 137. 138. #endregion 139. 140. #region Appointment Deleting 141. 142. public void ApptDeleted(object obj) 143. { 144. Interview deletedInterview = (from x in context.Interviews 145. where x.InterviewID == (obj as InterviewAppointment).InterviewID 146. select x).SingleOrDefault(); 147. 148. context.Interviews.Remove(deletedInterview); 149. context.SubmitChanges((s) => 150. { 151. ActionHistory myAction = new ActionHistory(); 152. myAction.InterviewID = deletedInterview.InterviewID; 153. myAction.PostingID = deletedInterview.PostingID; 154. myAction.ApplicantID = deletedInterview.ApplicantID; 155. myAction.Description = String.Format("Interview with {0} has been deleted by {1}", deletedInterview.ApplicantID.ToString(), "default user"); 156. myAction.TimeStamp = DateTime.Now; 157. eventAggregator.GetEvent<AddActionEvent>().Publish(myAction); 158. } 159. , null); 160. } 161. 162. #endregion 163. 164. #region Appointment Helpers :) 165. 166. public Interview AppointmentToEntity(InterviewAppointment ia) 167. { 168. Interview newInterview = new Interview(); 169. newInterview.Subject = ia.Subject; 170. newInterview.Body = ia.Body; 171. newInterview.Start = ia.Start; 172. newInterview.End = ia.End; 173. newInterview.ApplicantID = ia.ApplicantID; 174. newInterview.PostingID = ia.PostingID; 175. newInterview.InterviewID = ia.InterviewID; 176. 177. return newInterview; 178. } 179. 180. public InterviewAppointment EntityToAppointment(Interview ia) 181. { 182. InterviewAppointment newInterview = new InterviewAppointment(); 183. newInterview.Subject = ia.Subject; 184. newInterview.Body = ia.Body; 185. newInterview.Start = ia.Start; 186. newInterview.End = ia.End; 187. newInterview.ApplicantID = ia.ApplicantID; 188. newInterview.PostingID = ia.PostingID; 189. newInterview.InterviewID = ia.InterviewID; 190. 191. return newInterview; 192. } 193. 194. public void CopyAppointmentEdit(Interview entityInterview, InterviewAppointment appointmentInterview) 195. { 196. entityInterview.Subject = appointmentInterview.Subject; 197. entityInterview.Body = appointmentInterview.Body; 198. entityInterview.Start = appointmentInterview.Start; 199. entityInterview.End = appointmentInterview.End; 200. entityInterview.ApplicantID = appointmentInterview.ApplicantID; 201. entityInterview.PostingID = appointmentInterview.PostingID; 202. } 203. 204. #endregion 205.} One thing we're doing here which you won't see in any of the other ViewModels is creating a duplicate collection. I know this is something which will be fixed down the line for using RadScheduler, simplifying this process, but with WCF RIA changing as it does I wanted to ensure functionality would remain consistent as I continued development on this application. So, I do a little bit of duplication, but for the greater good. This all takes place starting on line 79, so for every entity that comes back we add it to the collection that is bound to RadScheduler. Otherwise, the DelegateCommands that you see correspond directly to the events they are named after. In each case, rather than sending over the full event arguments, I just send in the appointment in question (coming through as the object obj in all cases) so I can add (line 91), edit (line 119), and delete appointments (line 142) like normal. This just ensures they get updated back to my database. Also, the one bit of code you won't see is for the Appointment Creating (line 110) event- that is because in the command I've created I simply make the replacement I need to: 1.void element_AppointmentCreating(object sender, AppointmentCreatingEventArgs e) 2.{ 3. e.NewAppointment = new InterviewAppointment(); 4. base.ExecuteCommand(); 5.} And the ViewModel is none the wiser, the appointments just work as far as it is concerned since as they are created they become InterviewAppointments. End result? I've customized my EditAppointmentDialog as follows: And adding, editing, and deleting appointments works like a charm. I can even 'edit' by moving appointments around RadScheduler, so as they are dropped into a timeslot they perform their full edit routine and things get updated. And then, the Code-Behind Version Perhaps the thing I like the most about doing one then the other is I get to steal 90% or more of the code from the MVVM version. For example, the only real changes to the Code-Behind Xaml file exist in the control declaration, in which I use events instead of attached-behavior-event-commands: 01.<telerikScheduler:RadScheduler x:Name="xJobsScheduler" 02. Grid.Row="1" 03. Grid.Column="1" 04. Width="800" 05. MinWidth="600" 06. Height="500" 07. MinHeight="300" 08. EditAppointmentStyle="{StaticResource EditAppointmentStyle}" 09. AppointmentAdded="xJobsScheduler_AppointmentAdded" 10. AppointmentCreating="xJobsScheduler_AppointmentCreating" 11. AppointmentEdited="xJobsScheduler_AppointmentEdited" 12. AppointmentDeleted="xJobsScheduler_AppointmentDeleted"> 13.</telerikScheduler:RadScheduler> Easy, right? Otherwise, all the same styling in UserControl.Resources was re-used, right down to the DataContextProxy that lets us bind to a collection from our viewmodel (in this case, our code-behind) to use within the DataTemplate. The code conversion gets even easier, as I could literally copy and paste almost everything from the ViewModel to my Code-Behind, just a matter of pasting the right section into the right event. Here's the code-behind as proof: 001.public partial class SchedulingView : UserControl, INotifyPropertyChanged 002.{ 003. public RecruitingContext context; 004. 005. private QueryableCollectionView _jobsList; 006. public QueryableCollectionView JobsList 007. { 008. get { return this._jobsList; } 009. set 010. { 011. if (this._jobsList != value) 012. { 013. this._jobsList = value; 014. this.NotifyChanged("JobsList"); 015. } 016. } 017. } 018. 019. private QueryableCollectionView _applicantList; 020. public QueryableCollectionView ApplicantList 021. { 022. get { return _applicantList; } 023. set 024. { 025. if (_applicantList != value) 026. { 027. _applicantList = value; 028. NotifyChanged("ApplicantList"); 029. } 030. } 031. } 032. 033. private ObservableItemCollection<InterviewAppointment> _interviews = new ObservableItemCollection<InterviewAppointment>(); 034. public ObservableItemCollection<InterviewAppointment> Interviews 035. { 036. get { return _interviews; } 037. set 038. { 039. if (_interviews != value) 040. { 041. _interviews = value; 042. NotifyChanged("Interviews"); 043. } 044. } 045. } 046. 047. public SchedulingView() 048. { 049. InitializeComponent(); 050. 051. this.DataContext = this; 052. 053. this.Loaded += new RoutedEventHandler(SchedulingView_Loaded); 054. } 055. 056. void SchedulingView_Loaded(object sender, RoutedEventArgs e) 057. { 058. this.xJobsScheduler.AppointmentsSource = Interviews; 059. 060. context = new RecruitingContext(); 061. 062. LoadOperation loadop = context.Load(context.GetInterviewsQuery()); 063. loadop.Completed += new EventHandler(loadop_Completed); 064. 065. this._applicantList = new QueryableCollectionView(context.Applicants); 066. context.Load(context.GetApplicantsQuery()); 067. 068. this._jobsList = new QueryableCollectionView(context.JobPostings); 069. context.Load(context.GetJobPostingsQuery()); 070. } 071. 072. void loadop_Completed(object sender, EventArgs e) 073. { 074. LoadOperation loadop = sender as LoadOperation; 075. 076. _interviews.Clear(); 077. 078. foreach (var ent in loadop.Entities) 079. { 080. _interviews.Add(EntityToAppointment(ent as Interview)); 081. } 082. } 083. 084. private void xJobsScheduler_AppointmentAdded(object sender, Telerik.Windows.Controls.AppointmentAddedEventArgs e) 085. { 086. // now we have a new InterviewAppointment to add to our QCV :) 087. InterviewAppointment newInterview = e.Appointment as InterviewAppointment; 088. 089. this.context.Interviews.Add(AppointmentToEntity(newInterview)); 090. this.context.SubmitChanges((s) => 091. { 092. ActionHistory myAction = new ActionHistory(); 093. myAction.InterviewID = newInterview.InterviewID; 094. myAction.PostingID = newInterview.PostingID; 095. myAction.ApplicantID = newInterview.ApplicantID; 096. myAction.Description = String.Format("Interview with {0} has been created by {1}", newInterview.ApplicantID.ToString(), "default user"); 097. myAction.TimeStamp = DateTime.Now; 098. context.ActionHistories.Add(myAction); 099. context.SubmitChanges(); 100. } 101. , null); 102. } 103. 104. private void xJobsScheduler_AppointmentCreating(object sender, Telerik.Windows.Controls.AppointmentCreatingEventArgs e) 105. { 106. e.NewAppointment = new InterviewAppointment(); 107. } 108. 109. private void xJobsScheduler_AppointmentEdited(object sender, Telerik.Windows.Controls.AppointmentEditedEventArgs e) 110. { 111. Interview editedInterview = (from x in context.Interviews 112. where x.InterviewID == (e.Appointment as InterviewAppointment).InterviewID 113. select x).SingleOrDefault(); 114. 115. CopyAppointmentEdit(editedInterview, e.Appointment as InterviewAppointment); 116. 117. context.SubmitChanges((s) => 118. { 119. ActionHistory myAction = new ActionHistory(); 120. myAction.InterviewID = editedInterview.InterviewID; 121. myAction.PostingID = editedInterview.PostingID; 122. myAction.ApplicantID = editedInterview.ApplicantID; 123. myAction.Description = String.Format("Interview with {0} has been modified by {1}", editedInterview.ApplicantID.ToString(), "default user"); 124. myAction.TimeStamp = DateTime.Now; 125. context.ActionHistories.Add(myAction); 126. context.SubmitChanges(); 127. } 128. , null); 129. } 130. 131. private void xJobsScheduler_AppointmentDeleted(object sender, Telerik.Windows.Controls.AppointmentDeletedEventArgs e) 132. { 133. Interview deletedInterview = (from x in context.Interviews 134. where x.InterviewID == (e.Appointment as InterviewAppointment).InterviewID 135. select x).SingleOrDefault(); 136. 137. context.Interviews.Remove(deletedInterview); 138. context.SubmitChanges((s) => 139. { 140. ActionHistory myAction = new ActionHistory(); 141. myAction.InterviewID = deletedInterview.InterviewID; 142. myAction.PostingID = deletedInterview.PostingID; 143. myAction.ApplicantID = deletedInterview.ApplicantID; 144. myAction.Description = String.Format("Interview with {0} has been deleted by {1}", deletedInterview.ApplicantID.ToString(), "default user"); 145. myAction.TimeStamp = DateTime.Now; 146. context.ActionHistories.Add(myAction); 147. context.SubmitChanges(); 148. } 149. , null); 150. } 151. 152. #region Appointment Helpers :) 153. 154. public Interview AppointmentToEntity(InterviewAppointment ia) 155. { 156. Interview newInterview = new Interview(); 157. newInterview.Subject = ia.Subject; 158. newInterview.Body = ia.Body; 159. newInterview.Start = ia.Start; 160. newInterview.End = ia.End; 161. newInterview.ApplicantID = ia.ApplicantID; 162. newInterview.PostingID = ia.PostingID; 163. newInterview.InterviewID = ia.InterviewID; 164. 165. return newInterview; 166. } 167. 168. public InterviewAppointment EntityToAppointment(Interview ia) 169. { 170. InterviewAppointment newInterview = new InterviewAppointment(); 171. newInterview.Subject = ia.Subject; 172. newInterview.Body = ia.Body; 173. newInterview.Start = ia.Start; 174. newInterview.End = ia.End; 175. newInterview.ApplicantID = ia.ApplicantID; 176. newInterview.PostingID = ia.PostingID; 177. newInterview.InterviewID = ia.InterviewID; 178. 179. return newInterview; 180. } 181. 182. public void CopyAppointmentEdit(Interview entityInterview, InterviewAppointment appointmentInterview) 183. { 184. entityInterview.Subject = appointmentInterview.Subject; 185. entityInterview.Body = appointmentInterview.Body; 186. entityInterview.Start = appointmentInterview.Start; 187. entityInterview.End = appointmentInterview.End; 188. entityInterview.ApplicantID = appointmentInterview.ApplicantID; 189. entityInterview.PostingID = appointmentInterview.PostingID; 190. } 191. 192. #endregion 193. 194. #region INotifyPropertyChanged Members 195. 196. public event PropertyChangedEventHandler PropertyChanged; 197. 198. public void NotifyChanged(string propertyName) 199. { 200. if (string.IsNullOrEmpty(propertyName)) 201. throw new ArgumentException("propertyName"); 202. 203. PropertyChanged(this, new PropertyChangedEventArgs(propertyName)); 204. } 205. 206. #endregion 207.} Nice... right? :) One really important thing to note as well. See on line 51 where I set the DataContext before the Loaded event? This is super important, as if you don't have this set before the usercontrol is loaded, the DataContextProxy has no context to use and your EditAppointmentDialog Job/Applicant dropdowns will be blank and empty. Trust me on this, took a little bit of debugging to figure out that by setting the DataContext post-loaded would only lead to disaster and frustration. Otherwise, the only other real difference is that instead of sending an ActionHistory item through an event to get added to the database and saved, I do those right in the callback from submitting. The Result Again, I only have to post one picture because these bad boys used nearly identical code for both the MVVM and the code-behind views, so our end result is... So what have we learned here today? One, for the most part this MVVM thing is somewhat easy. Yeah, you sometimes have to write a bunch of extra code, but with the help of a few useful snippits you can turn the process into a pretty streamlined little workflow. Heck, this story gets even easier as you can see in this blog post by Michael Washington- specifically run a find on 'InvokeCommandAction' and you'll see the section regarding the command on TreeView in Blend 4. Brilliant! MVVM never looked so sweet! Otherwise, it is business as usual with RadScheduler for Silverlight whichever path you're choosing for your development. Between now and the next post, I'll be cleaning up styles a bit (those RadComboBoxes are a little too close to my labels!) and adding some to the RowDetailsViews for Applicants and Jobs, so you can see all the info for an appointment in the dropdown tab view. Otherwise, we're about ready to call a wrap on this oneDid you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

sqllite and populating list view, android

- by Rob Bushway

I am populating a text and list view from a sqllite database. The data is populating from the cursor correctly (I see the list filling with text rows), but I'm not able to see the actual text in the rows - all I see are empty rows. For the life of me, I can't figure out what I'm not able to see the data in the text rows. My layouts: Tab layout: list layout: row layout: <?xml version="1.0" encoding="utf-8"?> / My topics activity package com.gotquestions.gqapp; import com.gotquestions.gqapp.R.layout; import android.R; import android.app.ListActivity; import android.database.Cursor; import android.database.SQLException; import android.os.Bundle; import android.widget.SimpleCursorAdapter; public class TopicsActivity extends ListActivity { private DataBaseHelper myDbHelper; public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); // DataBaseHelper myDbHelper = new DataBaseHelper(this); myDbHelper = new DataBaseHelper(this); //test try { myDbHelper.openDataBase(); }catch(SQLException sqle){ throw sqle; } setContentView(layout.list_layout); Cursor c = myDbHelper.fetchAllTopics(); startManagingCursor(c); String[] from = new String[] { DataBaseHelper.KEY_TITLE }; int[] to = new int[] { R.id.text1 }; // Now create an array adapter and set it to display using our row SimpleCursorAdapter notes = new SimpleCursorAdapter(this, layout.notes_row, c, from, to); setListAdapter(notes); myDbHelper.close(); } } My database helper: package com.gotquestions.gqapp; import java.io.FileOutputStream; import java.io.IOException; import java.io.InputStream; import java.io.OutputStream; import android.content.Context; import android.database.Cursor; import android.database.SQLException; import android.database.sqlite.SQLiteDatabase; import android.database.sqlite.SQLiteException; import android.database.sqlite.SQLiteOpenHelper; import android.util.Log; public class DataBaseHelper extends SQLiteOpenHelper{ //The Android's default system path of your application database. private static String DB_PATH = "/data/data/com.gotquestions.gqapp/databases/"; private static String DB_NAME = "gotquestions_database.mp3"; public static final String KEY_TITLE = "topic_title"; public static final String KEY_ARTICLE_TITLE = "article_title"; public static final String KEY_ROWID = "_id"; private static final String TAG = null; private SQLiteDatabase myDataBase; // private final Context myContext; /** * Constructor * Takes and keeps a reference of the passed context in order to access to the application assets and resources. * @param context */ public DataBaseHelper(Context context) { super(context, DB_NAME, null, 1); this.myContext = context; } /** * Creates a empty database on the system and rewrites it with your own database. * */ public void createDataBase() throws IOException{ boolean dbExist = checkDataBase(); if(dbExist){ //do nothing - database already exist }else{ //By calling this method and empty database will be created into the default system path //of your application so we are gonna be able to overwrite that database with our database. this.getReadableDatabase(); try { copyDataBase(); } catch (IOException e) { throw new Error("Error copying database"); } } } /** * Check if the database already exist to avoid re-copying the file each time you open the application. * @return true if it exists, false if it doesn't */ private boolean checkDataBase(){ SQLiteDatabase checkDB = null; try{ String myPath = DB_PATH + DB_NAME; checkDB = SQLiteDatabase.openDatabase(myPath, null, SQLiteDatabase.OPEN_READONLY); }catch(SQLiteException e){ //database does't exist yet. } if(checkDB != null){ checkDB.close(); } return checkDB != null ? true : false; } /** * Copies your database from your local assets-folder to the just created empty database in the * system folder, from where it can be accessed and handled. * This is done by transfering bytestream. * */ private void copyDataBase() throws IOException{ //Open your local db as the input stream InputStream myInput = myContext.getAssets().open(DB_NAME); // Path to the just created empty db String outFileName = DB_PATH + DB_NAME; //Open the empty db as the output stream OutputStream myOutput = new FileOutputStream(outFileName); //transfer bytes from the inputfile to the outputfile byte[] buffer = new byte[1024]; int length; while ((length = myInput.read(buffer))>0){ myOutput.write(buffer, 0, length); } //Close the streams myOutput.flush(); myOutput.close(); myInput.close(); } public void openDataBase() throws SQLException{ //Open the database String myPath = DB_PATH + DB_NAME; myDataBase = SQLiteDatabase.openDatabase(myPath, null, SQLiteDatabase.OPEN_READONLY); } @Override public synchronized void close() { if(myDataBase != null) myDataBase.close(); super.close(); } @Override public void onCreate(SQLiteDatabase db) { // TODO Auto-generated method stub } @Override public void onUpgrade(SQLiteDatabase db, int oldVersion, int newVersion) { Log.w(TAG, "Upgrading database from version " + oldVersion + " to " + newVersion + ", which will destroy all old data"); db.execSQL("DROP TABLE IF EXISTS titles"); onCreate(db); } public Cursor getTitle(long rowId) throws SQLException { Cursor mCursor = myDataBase.query(true, "topics", new String[] { KEY_ROWID, KEY_TITLE }, KEY_ROWID + "=" + rowId, null, null, null, null, null); if (mCursor != null) { mCursor.moveToFirst(); } return mCursor; } public Cursor fetchAllTopics() { return myDataBase.query("topics", new String[] {KEY_ROWID, KEY_TITLE}, null, null, null, null, null); }; public Cursor fetchAllFavorites() { return myDataBase.query("articles", new String[] { KEY_ROWID, KEY_ARTICLE_TITLE}, null, null, null, null, null); }; }

Read the article

Cannot redeclare class error when generating PHPUnit code coverage report

- by Cobby

Starting a project with Zend Framework 1.10 and Doctrine 2 (Beta1). I am using namespaces in my own library code. When generating code coverage reports I get a Fatal Error about Redeclaring a class. To provide more info, I've commented out the xdebug_disable() call in my phpunit executable so you can see the function trace (disabled local variables output because there was too much output). Here's my Terminal output: $ phpunit PHPUnit 3.4.12 by Sebastian Bergmann. ........ Time: 4 seconds, Memory: 16.50Mb OK (8 tests, 14 assertions) Generating code coverage report, this may take a moment.PHP Fatal error: Cannot redeclare class Cob\Application\Resource\HelperBroker in /Users/Cobby/Sites/project/trunk/code/library/Cob/Application/Resource/HelperBroker.php on line 93 PHP Stack trace: PHP 1. {main}() /usr/local/zend/bin/phpunit:0 PHP 2. PHPUnit_TextUI_Command::main() /usr/local/zend/bin/phpunit:54 PHP 3. PHPUnit_TextUI_Command-run() /usr/local/zend/share/pear/PHPUnit/TextUI/Command.php:146 PHP 4. PHPUnit_TextUI_TestRunner-doRun() /usr/local/zend/share/pear/PHPUnit/TextUI/Command.php:213 PHP 5. PHPUnit_Util_Report::render() /usr/local/zend/share/pear/PHPUnit/TextUI/TestRunner.php:478 PHP 6. PHPUnit_Framework_TestResult-getCodeCoverageInformation() /usr/local/zend/share/pear/PHPUnit/Util/Report.php:97 PHP 7. PHPUnit_Util_Filter::getFilteredCodeCoverage() /usr/local/zend/share/pear/PHPUnit/Framework/TestResult.php:623 Fatal error: Cannot redeclare class Cob\Application\Resource\HelperBroker in /Users/Cobby/Sites/project/trunk/code/library/Cob/Application/Resource/HelperBroker.php on line 93 Call Stack: 0.0004 322888 1. {main}() /usr/local/zend/bin/phpunit:0 0.0816 4114628 2. PHPUnit_TextUI_Command::main() /usr/local/zend/bin/phpunit:54 0.0817 4114964 3. PHPUnit_TextUI_Command-run() /usr/local/zend/share/pear/PHPUnit/TextUI/Command.php:146 0.1151 5435528 4. PHPUnit_TextUI_TestRunner-doRun() /usr/local/zend/share/pear/PHPUnit/TextUI/Command.php:213 4.2931 16690760 5. PHPUnit_Util_Report::render() /usr/local/zend/share/pear/PHPUnit/TextUI/TestRunner.php:478 4.2931 16691120 6. PHPUnit_Framework_TestResult-getCodeCoverageInformation() /usr/local/zend/share/pear/PHPUnit/Util/Report.php:97 4.2931 16691148 7. PHPUnit_Util_Filter::getFilteredCodeCoverage() /usr/local/zend/share/pear/PHPUnit/Framework/TestResult.php:623 (I have no idea why it shows the error twice...?) And here is my phpunit.xml: <phpunit bootstrap="./code/tests/application/bootstrap.php" colors="true">  <testsuite name="My Promotions"> <directory>./</directory> </testsuite> <filter> <whitelist> <directory suffix=".php">../application</directory> <directory suffix=".php">../library/Cob</directory> <exclude>  <file>../library/Cob/Application/Resource/HelperBroker.php</file> <directory suffix=".phtml">../application</directory> <directory suffix=".php">../application/doctrine</directory> <file>../application/Bootstrap.php</file> <directory suffix=".php">../library/Cob/Tools</directory> </exclude> </whitelist> </filter> <logging> <log type="junit" target="../../build/reports/tests/report.xml" /> <log type="coverage-html" target="../../build/reports/coverage" charset="UTF-8" yui="true" highlight="true" lowUpperBound="50" highLowerBound="80" /> </logging> </phpunit> I have added a tag inside the which seams to hide this problem. I do have another application resource but it doesn't seam to have a problem (the other one is a Doctrine 2 resource). I'm not sure why it is specific to this class, my entire library is autoloaded so their isn't any include/require calls anywhere. I guess it should be noted that HelperBroker is the first file in the filesystem stemming out from library/Cob I am on Snow Leopard with the latest/recent versions of all software (Zend Server, Zend Framework, Doctrine 2 Beta1, Phing, PHPUnit, PEAR).

Read the article

Yet Another ASP.NET MVC CRUD Tutorial

- by Ricardo Peres

I know that I have not posted much on MVC, mostly because I don’t use it on my daily life, but since I find it so interesting, and since it is gaining such popularity, I will be talking about it much more. This time, it’s about the most basic of scenarios: CRUD. Although there are several ASP.NET MVC tutorials out there that cover ordinary CRUD operations, I couldn’t find any that would explain how we can have also AJAX, optimistic concurrency control and validation, using Entity Framework Code First, so I set out to write one! I won’t go into explaining what is MVC, Code First or optimistic concurrency control, or AJAX, I assume you are all familiar with these concepts by now. Let’s consider an hypothetical use case, products. For simplicity, we only want to be able to either view a single product or edit this product. First, we need our model: 1: public class Product 2: { 3: public Product() 4: { 5: this.Details = new HashSet<OrderDetail>(); 6: } 7: 8: [Required] 9: [StringLength(50)] 10: public String Name 11: { 12: get; 13: set; 14: } 15: 16: [Key] 17: [ScaffoldColumn(false)] 18: [DatabaseGenerated(DatabaseGeneratedOption.Identity)] 19: public Int32 ProductId 20: { 21: get; 22: set; 23: } 24: 25: [Required] 26: [Range(1, 100)] 27: public Decimal Price 28: { 29: get; 30: set; 31: } 32: 33: public virtual ISet<OrderDetail> Details 34: { 35: get; 36: protected set; 37: } 38: 39: [Timestamp] 40: [ScaffoldColumn(false)] 41: public Byte[] RowVersion 42: { 43: get; 44: set; 45: } 46: } Keep in mind that this is a simple scenario. Let’s see what we have: A class Product, that maps to a product record on the database; A product has a required (RequiredAttribute) Name property which can contain up to 50 characters (StringLengthAttribute); The product’s Price must be a decimal value between 1 and 100 (RangeAttribute); It contains a set of order details, for each time that it has been ordered, which we will not talk about (Details); The record’s primary key (mapped to property ProductId) comes from a SQL Server IDENTITY column generated by the database (KeyAttribute, DatabaseGeneratedAttribute); The table uses a SQL Server ROWVERSION (previously known as TIMESTAMP) column for optimistic concurrency control mapped to property RowVersion (TimestampAttribute). Then we will need a controller for viewing product details, which will located on folder ~/Controllers under the name ProductController: 1: public class ProductController : Controller 2: { 3: [HttpGet] 4: public ViewResult Get(Int32 id = 0) 5: { 6: if (id != 0) 7: { 8: using (ProductContext ctx = new ProductContext()) 9: { 10: return (this.View("Single", ctx.Products.Find(id) ?? new Product())); 11: } 12: } 13: else 14: { 15: return (this.View("Single", new Product())); 16: } 17: } 18: } If the requested product does not exist, or one was not requested at all, one with default values will be returned. I am using a view named Single to display the product’s details, more on that later. As you can see, it delegates the loading of products to an Entity Framework context, which is defined as: 1: public class ProductContext: DbContext 2: { 3: public DbSet<Product> Products 4: { 5: get; 6: set; 7: } 8: } Like I said before, I’ll keep it simple for now, only aggregate root Product is available. The controller will use the standard routes defined by the Visual Studio ASP.NET MVC 3 template: 1: routes.MapRoute( 2: "Default", // Route name 3: "{controller}/{action}/{id}", // URL with parameters 4: new { controller = "Home", action = "Index", id = UrlParameter.Optional } // Parameter defaults 5: ); Next, we need a view for displaying the product details, let’s call it Single, and have it located under ~/Views/Product: 1: <%@ Page Language="C#" Inherits="System.Web.Mvc.ViewPage<Product>" %> 2: <!DOCTYPE html> 3: 4: <html> 5: <head runat="server"> 6: <title>Product</title> 7: <script src="/Scripts/jquery-1.7.2.js" type="text/javascript"></script> 1: 2: <script src="/Scripts/jquery-ui-1.8.19.js" type="text/javascript"> 1: </script> 2: <script src="/Scripts/jquery.unobtrusive-ajax.js" type="text/javascript"> 1: </script> 2: <script src="/Scripts/jquery.validate.js" type="text/javascript"> 1: </script> 2: <script src="/Scripts/jquery.validate.unobtrusive.js" type="text/javascript"> 1: </script> 2: <script type="text/javascript"> 3: function onFailure(error) 4: { 5: } 6: 7: function onComplete(ctx) 8: { 9: } 10: 11: </script> 8: </head> 9: <body> 10: <div> 11: <% 1: : this.Html.ValidationSummary(false) %> 12: <% 1: using (this.Ajax.BeginForm("Edit", "Product", new AjaxOptions{ HttpMethod = FormMethod.Post.ToString(), OnSuccess = "onSuccess", OnFailure = "onFailure" })) { %> 13: <% 1: : this.Html.EditorForModel() %> 14: <input type="submit" name="submit" value="Submit" /> 15: <% 1: } %> 16: </div> 17: </body> 18: </html> Yes… I am using ASPX syntax… sorry about that! I implemented an editor template for the Product class, which must be located on the ~/Views/Shared/EditorTemplates folder as file Product.ascx: 1: <%@ Control Language="C#" Inherits="System.Web.Mvc.ViewUserControl<Product>" %> 2: <div> 3: <%: this.Html.HiddenFor(model => model.ProductId) %> 4: <%: this.Html.HiddenFor(model => model.RowVersion) %> 5: <fieldset> 6: <legend>Product</legend> 7: <div class="editor-label"> 8: <%: this.Html.LabelFor(model => model.Name) %> 9: </div> 10: <div class="editor-field"> 11: <%: this.Html.TextBoxFor(model => model.Name) %> 12: <%: this.Html.ValidationMessageFor(model => model.Name) %> 13: </div> 14: <div class="editor-label"> 15: <%= this.Html.LabelFor(model => model.Price) %> 16: </div> 17: <div class="editor-field"> 18: <%= this.Html.TextBoxFor(model => model.Price) %> 19: <%: this.Html.ValidationMessageFor(model => model.Price) %> 20: </div> 21: </fieldset> 22: </div> One thing you’ll notice is, I am including both the ProductId and the RowVersion properties as hidden fields; they will come handy later or, so that we know what product and version we are editing. The other thing is the included JavaScript files: jQuery, jQuery UI and unobtrusive validations. Also, I am not using the Content extension method for translating relative URLs, because that way I would lose JavaScript intellisense for jQuery functions. OK, so, at this moment, I want to add support for AJAX and optimistic concurrency control. So I write a controller method like this: 1: [HttpPost] 2: [AjaxOnly] 3: [Authorize] 4: public JsonResult Edit(Product product) 5: { 6: if (this.TryValidateModel(product) == true) 7: { 8: using (BlogContext ctx = new BlogContext()) 9: { 10: Boolean success = false; 11: 12: ctx.Entry(product).State = (product.ProductId == 0) ? EntityState.Added : EntityState.Modified; 13: 14: try 15: { 16: success = (ctx.SaveChanges() == 1); 17: } 18: catch (DbUpdateConcurrencyException) 19: { 20: ctx.Entry(product).Reload(); 21: } 22: 23: return (this.Json(new { Success = success, ProductId = product.ProductId, RowVersion = Convert.ToBase64String(product.RowVersion) })); 24: } 25: } 26: else 27: { 28: return (this.Json(new { Success = false, ProductId = 0, RowVersion = String.Empty })); 29: } 30: } So, this method is only valid for HTTP POST requests (HttpPost), coming from AJAX (AjaxOnly, from MVC Futures), and from authenticated users (Authorize). It returns a JSON object, which is what you would normally use for AJAX requests, containing three properties: Success: a boolean flag; RowVersion: the current version of the ROWVERSION column as a Base-64 string; ProductId: the inserted product id, as coming from the database. If the product is new, it will be inserted into the database, and its primary key will be returned into the ProductId property. Success will be set to true; If a DbUpdateConcurrencyException occurs, it means that the value in the RowVersion property does not match the current ROWVERSION column value on the database, so the record must have been modified between the time that the page was loaded and the time we attempted to save the product. In this case, the controller just gets the new value from the database and returns it in the JSON object; Success will be false. Otherwise, it will be updated, and Success, ProductId and RowVersion will all have their values set accordingly. So let’s see how we can react to these situations on the client side. Specifically, we want to deal with these situations: The user is not logged in when the update/create request is made, perhaps the cookie expired; The optimistic concurrency check failed; All went well. So, let’s change our view: 1: <%@ Page Language="C#" Inherits="System.Web.Mvc.ViewPage<Product>" %> 2: <%@ Import Namespace="System.Web.Security" %> 3: 4: <!DOCTYPE html> 5: 6: <html> 7: <head runat="server"> 8: <title>Product</title> 9: <script src="/Scripts/jquery-1.7.2.js" type="text/javascript"></script> 1: 2: <script src="/Scripts/jquery-ui-1.8.19.js" type="text/javascript"> 1: </script> 2: <script src="/Scripts/jquery.unobtrusive-ajax.js" type="text/javascript"> 1: </script> 2: <script src="/Scripts/jquery.validate.js" type="text/javascript"> 1: </script> 2: <script src="/Scripts/jquery.validate.unobtrusive.js" type="text/javascript"> 1: </script> 2: <script type="text/javascript"> 3: function onFailure(error) 4: { 5: window.alert('An error occurred: ' + error); 6: } 7: 8: function onSuccess(ctx) 9: { 10: if (typeof (ctx.Success) != 'undefined') 11: { 12: $('input#ProductId').val(ctx.ProductId); 13: $('input#RowVersion').val(ctx.RowVersion); 14: 15: if (ctx.Success == false) 16: { 17: window.alert('An error occurred while updating the entity: it may have been modified by third parties. Please try again.'); 18: } 19: else 20: { 21: window.alert('Saved successfully'); 22: } 23: } 24: else 25: { 26: if (window.confirm('Not logged in. Login now?') == true) 27: { 28: document.location.href = '<%: FormsAuthentication.LoginUrl %>?ReturnURL=' + document.location.pathname; 29: } 30: } 31: } 32: 33: </script> 10: </head> 11: <body> 12: <div> 13: <% 1: : this.Html.ValidationSummary(false) %> 14: <% 1: using (this.Ajax.BeginForm("Edit", "Product", new AjaxOptions{ HttpMethod = FormMethod.Post.ToString(), OnSuccess = "onSuccess", OnFailure = "onFailure" })) { %> 15: <% 1: : this.Html.EditorForModel() %> 16: <input type="submit" name="submit" value="Submit" /> 17: <% 1: } %> 18: </div> 19: </body> 20: </html> The implementation of the onSuccess function first checks if the response contains a Success property, if not, the most likely cause is the request was redirected to the login page (using Forms Authentication), because it wasn’t authenticated, so we navigate there as well, keeping the reference to the current page. It then saves the current values of the ProductId and RowVersion properties to their respective hidden fields. They will be sent on each successive post and will be used in determining if the request is for adding a new product or to updating an existing one. The only thing missing is the ability to insert a new product, after inserting/editing an existing one, which can be easily achieved using this snippet: 1: <input type="button" value="New" onclick="$('input#ProductId').val('');$('input#RowVersion').val('');"/> And that’s it.

Read the article

Cold Start

- by antony.reynolds

Well we had snow drifts 3ft deep on Saturday so it must be spring time. In preparation for Spring we decided to move the lawn tractor. Of course after sitting in the garage all winter it refused to start. I then come into the office and need to start my 11g SOA Suite installation. I thought about this and decided my tractor might be cranky but at least I can script the startup of my SOA Suite 11g installation. So with this in mind I created 6 scripts. I created them for Linux but they should translate to Windows without too many problems. This is left as an exercise to the reader, note you will have to hardcode more than I did in the Linux scripts and create separate script files for the sqlplus and WLST sections. Order to start things I believe there should be order in all things, especially starting the SOA Suite. So here is my preferred order. Start Database This is need by EM and the rest of SOA Suite so best to start it before the Admin Server and managed servers. Start Node Manager on all machines This is needed if you want the scripts to work across machines. Start Admin Server Once this is done in theory you can manually stat the managed servers using WebLogic console. But then you have to wait for console to be available. Scripting it all is quicker and easier way of starting. Start Managed Servers & Clusters Best to start them one per physical machine at a time to avoid undue load on the machines. Non-clustered install will have just soa_server1 and bam_serv1 by default. Clusters will have at least SOA and BAM clusters that can be started as a group or individually. I have provided scripts for standalone servers, but easy to change them to work with clusters. Starting Database I have provided a very primitive script (available here) to start the database, the listener and the DB console. The section highlighted in red needs to match your database name. #!/bin/sh echo "##############################" echo "# Setting Oracle Environment #" echo "##############################" . oraenv <<-EOF orcl EOF echo "#####################" echo "# Starting Database #" echo "#####################" sqlplus / as sysdba <<-EOF startup exit EOF echo "#####################" echo "# Starting Listener #" echo "#####################" lsnrctl start echo "######################" echo "# Starting dbConsole #" echo "######################" emctl start dbconsole read -p "Hit <enter> to continue" Starting SOA Suite My script for starting the SOA Suite (available here) breaks the task down into five sections. Setting the Environment First set up the environment variables. The variables highlighted in red probably need changing for your environment. #!/bin/sh echo "###########################" echo "# Setting SOA Environment #" echo "###########################" export MW_HOME=~oracle/Middleware11gPS1 export WL_HOME=$MW_HOME/wlserver_10.3 export ORACLE_HOME=$MW_HOME/Oracle_SOA export DOMAIN_NAME=soa_std_domain export DOMAIN_HOME=$MW_HOME/user_projects/domains/$DOMAIN_NAME Starting the Node Manager I start node manager with a nohup to stop it exiting when the script terminates and I redirect the standard output and standard error to a file in a logs directory. cd $DOMAIN_HOME echo "#########################" echo "# Starting Node Manager #" echo "#########################" nohup $WL_HOME/server/bin/startNodeManager.sh >logs/NodeManager.out 2>&1 & Starting the Admin Server I had problems starting the Admin Server from Node Manager so I decided to start it using the command line script. I again use nohup and redirect output. echo "#########################" echo "# Starting Admin Server #" echo "#########################" nohup ./startWebLogic.sh >logs/AdminServer.out 2>&1 & Starting the Managed Servers I then used WLST (WebLogic Scripting Tool) to start the managed servers. First I waited for the Admin Server to come up by putting a connect command in a loop. I could have put the WLST commands into a separate script file but I wanted to reduce the number of files I was using and so used redirected input (here syntax). $ORACLE_HOME/common/bin/wlst.sh <<-EOF import time sleep=time.sleep print "#####################################" print "# Waiting for Admin Server to Start #" print "#####################################" while True: try: connect(adminServerName="AdminServer") break except: sleep(10) I then start the SOA server and tell WLST to wait until it is started before returning. If starting a cluster then the start command would be modified accordingly to start the SOA cluster. print "#######################" print "# Starting SOA Server #" print "#######################" start(name="soa_server1", block="true") I then start the BAM server in the same way as the SOA server. print "#######################" print "# Starting BAM Server #" print "#######################" start(name="bam_server1", block="true") EOF Finally I let people know the servers are up and wait for input in case I am running in a separate window, in which case the result would be lost without the read command. echo "#####################" echo "# SOA Suite Started #" echo "#####################" read -p "Hit <enter> to continue" Stopping the SOA Suite My script for shutting down the SOA Suite (available here) is basically the reverse of my startup script. After setting the environment I connect to the Admin Server using WLST and shut down the managed servers and the admin server. Again the script would need modifying for a cluster. Stopping the Servers If I cannot connect to the Admin Server I try to connect to the node manager, in case the Admin Server is down but the managed servers are up. #!/bin/sh echo "###########################" echo "# Setting SOA Environment #" echo "###########################" export MW_HOME=~oracle/Middleware11gPS1 export WL_HOME=$MW_HOME/wlserver_10.3 export ORACLE_HOME=$MW_HOME/Oracle_SOA export DOMAIN_NAME=soa_std_domain export DOMAIN_HOME=$MW_HOME/user_projects/domains/$DOMAIN_NAME cd $DOMAIN_HOME $MW_HOME/Oracle_SOA/common/bin/wlst.sh <<-EOF try: print("#############################") print("# Connecting to AdminServer #") print("#############################") connect(username='weblogic',password='welcome1',url='t3://localhost:7001') except: print "#########################################" print "# Unable to connect to Admin Server #" print "# Attempting to connect to Node Manager #" print "#########################################" nmConnect(domainName=os.getenv("DOMAIN_NAME")) print "#######################" print "# Stopping BAM Server #" print "#######################" shutdown('bam_server1') print "#######################" print "# Stopping SOA Server #" print "#######################" shutdown('soa_server1') print "#########################" print "# Stopping Admin Server #" print "#########################" shutdown('AdminServer') disconnect() nmDisconnect() EOF Stopping the Node Manager I stopped the node manager by searching for the java node manager process using the ps command and then killing that process. echo "#########################" echo "# Stopping Node Manager #" echo "#########################" kill -9 `ps -ef | grep java | grep NodeManager | awk '{print $2;}'` echo "#####################" echo "# SOA Suite Stopped #" echo "#####################" read -p "Hit <enter> to continue" Stopping the Database Again my script for shutting down the database is the reverse of my start script. It is available here. The only change needed might be to the database name. #!/bin/sh echo "##############################" echo "# Setting Oracle Environment #" echo "##############################" . oraenv <<-EOF orcl EOF echo "######################" echo "# Stopping dbConsole #" echo "######################" emctl stop dbconsole echo "#####################" echo "# Stopping Listener #" echo "#####################" lsnrctl stop echo "#####################" echo "# Stopping Database #" echo "#####################" sqlplus / as sysdba <<-EOF shutdown immediate exit EOF read -p "Hit <enter> to continue" Cleaning Up Cleaning SOA Suite I often run tests and want to clean up all the log files. The following script (available here) does this for the WebLogic servers in a given domain on a machine. After setting the domain I just remove all files under the servers logs directories. It also cleans up the log files I created with my startup scripts. These scripts could be enhanced to copy off the log files if you needed them but in my test environments I don’t need them and would prefer to reclaim the disk space. #!/bin/sh echo "###########################" echo "# Setting SOA Environment #" echo "###########################" export MW_HOME=~oracle/Middleware11gPS1 export WL_HOME=$MW_HOME/wlserver_10.3 export ORACLE_HOME=$MW_HOME/Oracle_SOA export DOMAIN_NAME=soa_std_domain export DOMAIN_HOME=$MW_HOME/user_projects/domains/$DOMAIN_NAME echo "##########################" echo "# Cleaning SOA Log Files #" echo "##########################" cd $DOMAIN_HOME rm -Rf logs/* servers/*/logs/* read -p "Hit <enter> to continue" Cleaning Database I also created a script to clean up the dump files of an Oracle database instance and also the EM log files (available here). This relies on the machine name being correct as the EM log files are stored in a directory that is based on the hostname and the Oracle SID. #!/bin/sh echo "##############################" echo "# Setting Oracle Environment #" echo "##############################" . oraenv <<-EOF orcl EOF echo "#############################" echo "# Cleaning Oracle Log Files #" echo "#############################" rm -Rf $ORACLE_BASE/admin/$ORACLE_SID/*dump/* rm -Rf $ORACLE_HOME/`hostname`_$ORACLE_SID/sysman/log/* read -p "Hit <enter> to continue" Summary Hope you find the above scripts useful. They certainly stop me hanging around waiting for things to happen on my test machine and make it easy to run a test, change parameters, bounce the SOA Suite and clean the logs between runs so I can see exactly what is happening. Now I need to get that mower started…

Read the article

Sending an Activation Email when a New User Registers

- by John

Hello, The code below is a login system that I am using. It is supposed to allow a new user to register and then send the new user an activation email. It is inserting the new user into the MySQL database, but it is not sending the activation email. Any ideas why it's not sending the activation email? Thanks in advance, John header.php: <?php //error_reporting(0); session_start(); require_once ('db_connect.inc.php'); require_once ("function.inc.php"); $seed="0dAfghRqSTgx"; $domain = "...com"; ?> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"> <html> <head> <title>The Sandbox - <?php echo $domain; ?></title> <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"> <link rel="stylesheet" type="text/css" href="sandbox.css"> <div class="hslogo"><a href="http://www...com/sandbox/"><img src="images/hslogo.png" alt="Example" border="0"/></a></div> </head> <body> login.php: <?php if (!isLoggedIn()) { // user is not logged in. if (isset($_POST['cmdlogin'])) { // retrieve the username and password sent from login form & check the login. if (checkLogin($_POST['username'], $_POST['password'])) { show_userbox(); } else { echo "Incorrect Login information !"; show_loginform(); } } else { // User is not logged in and has not pressed the login button // so we show him the loginform show_loginform(); } } else { // The user is already loggedin, so we show the userbox. show_userbox(); } ?> function show_loginform($disabled = false) { echo '<form name="login-form" id="login-form" method="post" action="./index.php?'.$_SERVER['QUERY_STRING'].'"> <div class="usernameformtext"><label title="Username">Username: </label></div> <div class="usernameformfield"><input tabindex="1" accesskey="u" name="username" type="text" maxlength="30" id="username" /></div> <div class="passwordformtext"><label title="Password">Password: </label></div> <div class="passwordformfield"><input tabindex="2" accesskey="p" name="password" type="password" maxlength="15" id="password" /></div> <div class="registertext"><a href="http://www...com/sandbox/register.php" title="Register">Register</a></div> <div class="lostpasswordtext"><a href="http://www...com/sandbox/lostpassword.php" title="Lost Password">Lost password?</a></div> <p class="loginbutton"><input tabindex="3" accesskey="l" type="submit" name="cmdlogin" value="Login" '; if ($disabled == true) { echo 'disabled="disabled"'; } echo ' /></p></form>'; } register.php: <?php require_once "header.php"; if (isset($_POST['register'])){ if (registerNewUser($_POST['username'], $_POST['password'], $_POST['password2'], $_POST['email'])){ echo "<div class='registration'>Thank you for registering, an email has been sent to your inbox, Please activate your account. <a href='http://www...com/sandbox/index.php'>Click here to login.</a> </div>"; }else { echo "Registration failed! Please try again."; show_registration_form(); } } else { // has not pressed the register button show_registration_form(); } ?> New User Function: function registerNewUser($username, $password, $password2, $email) { global $seed; if (!valid_username($username) || !valid_password($password) || !valid_email($email) || $password != $password2 || user_exists($username)) { return false; } $code = generate_code(20); $sql = sprintf("insert into login (username,password,email,actcode) value ('%s','%s','%s','%s')", mysql_real_escape_string($username), mysql_real_escape_string(sha1($password . $seed)) , mysql_real_escape_string($email), mysql_real_escape_string($code)); if (mysql_query($sql)) { $id = mysql_insert_id(); if (sendActivationEmail($username, $password, $id, $email, $code)) { return true; } else { return false; } } else { return false; } return false; } Send Activation Email function: function sendActivationEmail($username, $password, $uid, $email, $actcode) { global $domain; $link = "http://www.$domain/sandbox/activate.php?uid=$uid&actcode=$actcode"; $message = " Thank you for registering on http://www.$domain/, Your account information: username: $username password: $password Please click the link below to activate your account. $link Regards $domain Administration "; if (sendMail($email, "Please activate your account.", $message, "no-reply@$domain")) { return true; } else { return false; } }

Read the article

Custom Paging for GridView in an UpdatePanel not firing PageIndexChanging event

- by JeffCren

I have a GridView that uses custom paging inside an UpdatePanel (so that the paging and sorting of the gridview don't cause postback). The sorting works fine, but the paging doesn't. The PageIndexChanging event is never called. This is the aspx code: <asp:UpdatePanel runat="server" ID="upSearchResults" ChildrenAsTriggers="true" UpdateMode="Always"> <ContentTemplate> <asp:GridView ID="gvSearchResults" runat="server" AllowSorting="true" AutoGenerateColumns="false" AllowPaging="true" PageSize="10" OnDataBound="gvSearchResults_DataBound" OnRowDataBound ="gvSearchResults_RowDataBound" OnSorting="gvSearchResults_Sorting" OnPageIndexChanging="gvSearchResults_PageIndexChanging" Width="100%" EnableSortingAndPagingCallbacks="false"> <Columns> <asp:TemplateField HeaderText="Select" HeaderStyle-HorizontalAlign="Center"> <ItemTemplate> <asp:HyperLink ID="lnkAdd" runat="server">Add</asp:HyperLink> <asp:HiddenField ID="hfPersonId" runat="server" Value='<%# Eval("Id") %>'/> </ItemTemplate> </asp:TemplateField> <asp:BoundField HeaderText="First Name" DataField="FirstName" HeaderStyle-HorizontalAlign="Center" ItemStyle-HorizontalAlign="Center" SortExpression="FirstName" /> <asp:BoundField HeaderText="Last Name" DataField="LastName" HeaderStyle-HorizontalAlign="Center" ItemStyle-HorizontalAlign="Center" SortExpression="LastName" /> <asp:TemplateField HeaderText="Phone Number" HeaderStyle-HorizontalAlign="Center" ItemStyle-HorizontalAlign="Center" > <ItemTemplate> <asp:Label ID="lblPhone" runat="server" Text="" /> </ItemTemplate> </asp:TemplateField> </Columns> <PagerTemplate> <table width="100%" class="pager"> <tr> <td> </td> </tr> </table> </PagerTemplate> </asp:GridView> <div class="btnContainer"> <div class="btn btn-height_small btn-style_dominant"> <asp:LinkButton ID="lbtNewRecord" runat="server" OnClick="lbtNewRecord_Click"><span>Create New Record</span></asp:LinkButton> </div> <div class="btn btn-height_small btn-style_subtle"> <a onclick="openParticipantModal();"><span>Cancel</span></a> </div> </div> </ContentTemplate> <Triggers> <asp:AsyncPostBackTrigger ControlID="gvSearchResults" EventName="PageIndexChanging" /> <asp:AsyncPostBackTrigger ControlID="gvSearchResults" EventName="Sorting" /> </Triggers> </asp:UpdatePanel> In the code behind I have a SetPaging method that is called on the GridView OnDataBound event: private void SetPaging(GridView gv) { GridViewRow row = gv.BottomPagerRow; var place = row.Cells[0]; var first = new LinkButton(); first.CommandName = "Page"; first.CommandArgument = "First"; first.Text = "First"; first.ToolTip = "First Page"; if (place != null) place.Controls.Add(first); var lbl = new Label(); lbl.Text = " "; if (place != null) place.Controls.Add(lbl); var prev = new LinkButton(); prev.CommandName = "Page"; prev.CommandArgument = "Prev"; prev.Text = "Prev"; prev.ToolTip = "Previous Page"; if (place != null) place.Controls.Add(prev); var lbl2 = new Label(); lbl2.Text = " "; if (place != null) place.Controls.Add(lbl2); for (int i = 1; i <= gv.PageCount; i++) { var btn = new LinkButton(); btn.CommandName = "Page"; btn.CommandArgument = i.ToString(); if (i == gv.PageIndex + 1) { btn.BackColor = Color.Gray; } btn.Text = i.ToString(); btn.ToolTip = "Page " + i.ToString(); if (place != null) place.Controls.Add(btn); var lbl3 = new Label(); lbl3.Text = " "; if (place != null) place.Controls.Add(lbl3); } var next = new LinkButton(); next.CommandName = "Page"; next.CommandArgument = "Next"; next.Text = "Next"; next.ToolTip = "Next Page"; if (place != null) place.Controls.Add(next); var lbl4 = new Label(); lbl4.Text = " "; if (place != null) place.Controls.Add(lbl4); var last = new LinkButton(); last.CommandName = "Page"; last.CommandArgument = "Last"; last.Text = "Last"; last.ToolTip = "Last Page"; if (place != null) place.Controls.Add(last); var lbl5 = new Label(); lbl5.Text = " "; if (place != null) place.Controls.Add(lbl5); } The paging works if I don't use custom paging, but I really need to use the custom paging. I can't figure out why the PageIndexChanging event isn't fired when I'm using the custom paging. Thanks, Jeff

Read the article

Using VLOOKUP in Excel

- by Mark Virtue

VLOOKUP is one of Excel’s most useful functions, and it’s also one of the least understood. In this article, we demystify VLOOKUP by way of a real-life example. We’ll create a usable Invoice Template for a fictitious company. So what is VLOOKUP? Well, of course it’s an Excel function. This article will assume that the reader already has a passing understanding of Excel functions, and can use basic functions such as SUM, AVERAGE, and TODAY. In its most common usage, VLOOKUP is a database function, meaning that it works with database tables – or more simply, lists of things in an Excel worksheet. What sort of things? Well, any sort of thing. You may have a worksheet that contains a list of employees, or products, or customers, or CDs in your CD collection, or stars in the night sky. It doesn’t really matter. Here’s an example of a list, or database. In this case it’s a list of products that our fictitious company sells: Usually lists like this have some sort of unique identifier for each item in the list. In this case, the unique identifier is in the “Item Code” column. Note: For the VLOOKUP function to work with a database/list, that list must have a column containing the unique identifier (or “key”, or “ID”), and that column must be the first column in the table. Our sample database above satisfies this criterion. The hardest part of using VLOOKUP is understanding exactly what it’s for. So let’s see if we can get that clear first: VLOOKUP retrieves information from a database/list based on a supplied instance of the unique identifier. Put another way, if you put the VLOOKUP function into a cell and pass it one of the unique identifiers from your database, it will return you one of the pieces of information associated with that unique identifier. In the example above, you would pass VLOOKUP an item code, and it would return to you either the corresponding item’s description, its price, or its availability (its “In stock” quantity). Which of these pieces of information will it pass you back? Well, you get to decide this when you’re creating the formula. If all you need is one piece of information from the database, it would be a lot of trouble to go to to construct a formula with a VLOOKUP function in it. Typically you would use this sort of functionality in a reusable spreadsheet, such as a template. Each time someone enters a valid item code, the system would retrieve all the necessary information about the corresponding item. Let’s create an example of this: An Invoice Template that we can reuse over and over in our fictitious company. First we start Excel… …and we create ourselves a blank invoice: This is how it’s going to work: The person using the invoice template will fill in a series of item codes in column “A”, and the system will retrieve each item’s description and price, which will be used to calculate the line total for each item (assuming we enter a valid quantity). For the purposes of keeping this example simple, we will locate the product database on a separate sheet in the same workbook: In reality, it’s more likely that the product database would be located in a separate workbook. It makes little difference to the VLOOKUP function, which doesn’t really care if the database is located on the same sheet, a different sheet, or a completely different workbook. In order to test the VLOOKUP formula we’re about to write, we first enter a valid item code into cell A11: Next, we move the active cell to the cell in which we want information retrieved from the database by VLOOKUP to be stored. Interestingly, this is the step that most people get wrong. To explain further: We are about to create a VLOOKUP formula that will retrieve the description that corresponds to the item code in cell A11. Where do we want this description put when we get it? In cell B11, of course. So that’s where we write the VLOOKUP formula – in cell B11. Select cell B11: We need to locate the list of all available functions that Excel has to offer, so that we can choose VLOOKUP and get some assistance in completing the formula. This is found by first clicking the Formulas tab, and then clicking Insert Function: A box appears that allows us to select any of the functions available in Excel. To find the one we’re looking for, we could type a search term like “lookup” (because the function we’re interested in is a lookup function). The system would return us a list of all lookup-related functions in Excel. VLOOKUP is the second one in the list. Select it an click OK… The Function Arguments box appears, prompting us for all the arguments (or parameters) needed in order to complete the VLOOKUP function. You can think of this box as the function is asking us the following questions: What unique identifier are you looking up in the database? Where is the database? Which piece of information from the database, associated with the unique identifier, do you wish to have retrieved for you? The first three arguments are shown in bold, indicating that they are mandatory arguments (the VLOOKUP function is incomplete without them and will not return a valid value). The fourth argument is not bold, meaning that it’s optional: We will complete the arguments in order, top to bottom. The first argument we need to complete is the Lookup_value argument. The function needs us to tell it where to find the unique identifier (the item code in this case) that it should be retuning the description of. We must select the item code we entered earlier (in A11). Click on the selector icon to the right of the first argument: Then click once on the cell containing the item code (A11), and press Enter: The value of “A11” is inserted into the first argument. Now we need to enter a value for the Table_array argument. In other words, we need to tell VLOOKUP where to find the database/list. Click on the selector icon next to the second argument: Now locate the database/list and select the entire list – not including the header line. The database is located on a separate worksheet, so we first click on that worksheet tab: Next we select the entire database, not including the header line: …and press Enter. The range of cells that represents the database (in this case “’Product Database’!A2:D7”) is entered automatically for us into the second argument. Now we need to enter the third argument, Col_index_num. We use this argument to specify to VLOOKUP which piece of information from the database, associate with our item code in A11, we wish to have returned to us. In this particular example, we wish to have the item’s description returned to us. If you look on the database worksheet, you’ll notice that the “Description” column is the second column in the database. This means that we must enter a value of “2” into the Col_index_num box: It is important to note that that we are not entering a “2” here because the “Description” column is in the B column on that worksheet. If the database happened to start in column K of the worksheet, we would still enter a “2” in this field. Finally, we need to decide whether to enter a value into the final VLOOKUP argument, Range_lookup. This argument requires either a true or false value, or it should be left blank. When using VLOOKUP with databases (as is true 90% of the time), then the way to decide what to put in this argument can be thought of as follows: If the first column of the database (the column that contains the unique identifiers) is sorted alphabetically/numerically in ascending order, then it’s possible to enter a value of true into this argument, or leave it blank. If the first column of the database is not sorted, or it’s sorted in descending order, then you must enter a value of false into this argument As the first column of our database is not sorted, we enter false into this argument: That’s it! We’ve entered all the information required for VLOOKUP to return the value we need. Click the OK button and notice that the description corresponding to item code “R99245” has been correctly entered into cell B11: The formula that was created for us looks like this: If we enter a different item code into cell A11, we will begin to see the power of the VLOOKUP function: The description cell changes to match the new item code: We can perform a similar set of steps to get the item’s price returned into cell E11. Note that the new formula must be created in cell E11. The result will look like this: …and the formula will look like this: Note that the only difference between the two formulae is the third argument (Col_index_num) has changed from a “2” to a “3” (because we want data retrieved from the 3rd column in the database). If we decided to buy 2 of these items, we would enter a “2” into cell D11. We would then enter a simple formula into cell F11 to get the line total: =D11*E11 …which looks like this… Completing the Invoice Template We’ve learned a lot about VLOOKUP so far. In fact, we’ve learned all we’re going to learn in this article. It’s important to note that VLOOKUP can be used in other circumstances besides databases. This is less common, and may be covered in future How-To Geek articles. Our invoice template is not yet complete. In order to complete it, we would do the following: We would remove the sample item code from cell A11 and the “2” from cell D11. This will cause our newly created VLOOKUP formulae to display error messages: We can remedy this by judicious use of Excel’s IF() and ISBLANK() functions. We change our formula from this… =VLOOKUP(A11,’Product Database’!A2:D7,2,FALSE) …to this… =IF(ISBLANK(A11),”",VLOOKUP(A11,’Product Database’!A2:D7,2,FALSE)) We would copy the formulas in cells B11, E11 and F11 down to the remainder of the item rows of the invoice. Note that if we do this, the resulting formulas will no longer correctly refer to the database table. We could fix this by changing the cell references for the database to absolute cell references. Alternatively – and even better – we could create a range name for the entire product database (such as “Products”), and use this range name instead of the cell references. The formula would change from this… =IF(ISBLANK(A11),”",VLOOKUP(A11,’Product Database’!A2:D7,2,FALSE)) …to this… =IF(ISBLANK(A11),”",VLOOKUP(A11,Products,2,FALSE)) …and then copy the formulas down to the rest of the invoice item rows. We would probably “lock” the cells that contain our formulae (or rather unlock the other cells), and then protect the worksheet, in order to ensure that our carefully constructed formulae are not accidentally overwritten when someone comes to fill in the invoice. We would save the file as a template, so that it could be reused by everyone in our company If we were feeling really clever, we would create a database of all our customers in another worksheet, and then use the customer ID entered in cell F5 to automatically fill in the customer’s name and address in cells B6, B7 and B8. If you would like to practice with VLOOKUP, or simply see our resulting Invoice Template, it can be downloaded from here. Similar Articles Productive Geek Tips Make Excel 2007 Print Gridlines In Workbook FileMake Excel 2007 Always Save in Excel 2003 FormatConvert Older Excel Documents to Excel 2007 FormatImport Microsoft Access Data Into ExcelChange the Default Font in Excel 2007 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Classic Cinema Online offers 100’s of OnDemand Movies OutSync will Sync Photos of your Friends on Facebook and Outlook Windows 7 Easter Theme YoWindoW, a real time weather screensaver Optimize your computer the Microsoft way Stormpulse provides slick, real time weather data

Read the article

how to clear stack after stack overflow signal occur

- by user353573

In pthread, After reaching yellow zone in stack, signal handler stop the recursive function by making it return however, we can only continue to use extra area in yellow zone, how to clear the rubbish before the yellow zone in the thread stack ? (Copied from "answers"): #include <pthread.h> #include <stdio.h> #include <stdlib.h> #include <signal.h> #include <setjmp.h> #include <sys/mman.h> #include <unistd.h> #include <assert.h> #include <sys/resource.h> #define ALT_STACK_SIZE (64*1024) #define YELLOW_ZONE_PAGES (1) typedef struct { size_t stack_size; char* stack_pointer; char* red_zone_boundary; char* yellow_zone_boundary; sigjmp_buf return_point; size_t red_zone_size; } ThreadInfo; static pthread_key_t thread_info_key; static struct sigaction newAct, oldAct; bool gofromyellow = false; int call_times = 0; static void main_routine(){ // make it overflow if(gofromyellow == true) { printf("return from yellow zone, called %d times\n", call_times); return; } else { call_times = call_times + 1; main_routine(); gofromyellow = true; } } // red zone management static void stackoverflow_routine(){ fprintf(stderr, "stack overflow error.\n"); fflush(stderr); } // yellow zone management static void yellow_zone_hook(){ fprintf(stderr, "exceed yellow zone.\n"); fflush(stderr); } static int get_stack_info(void** stackaddr, size_t* stacksize){ int ret = -1; pthread_attr_t attr; pthread_attr_init(&attr); if(pthread_getattr_np(pthread_self(), &attr) == 0){ ret = pthread_attr_getstack(&attr, stackaddr, stacksize); } pthread_attr_destroy(&attr); return ret; } static int is_in_stack(const ThreadInfo* tinfo, char* pointer){ return (tinfo->stack_pointer <= pointer) && (pointer < tinfo->stack_pointer + tinfo->stack_size); } static int is_in_red_zone(const ThreadInfo* tinfo, char* pointer){ if(tinfo->red_zone_boundary){ return (tinfo->stack_pointer <= pointer) && (pointer < tinfo->red_zone_boundary); } } static int is_in_yellow_zone(const ThreadInfo* tinfo, char* pointer){ if(tinfo->yellow_zone_boundary){ return (tinfo->red_zone_boundary <= pointer) && (pointer < tinfo->yellow_zone_boundary); } } static void set_yellow_zone(ThreadInfo* tinfo){ int pagesize = sysconf(_SC_PAGE_SIZE); assert(pagesize > 0); tinfo->yellow_zone_boundary = tinfo->red_zone_boundary + pagesize * YELLOW_ZONE_PAGES; mprotect(tinfo->red_zone_boundary, pagesize * YELLOW_ZONE_PAGES, PROT_NONE); } static void reset_yellow_zone(ThreadInfo* tinfo){ size_t pagesize = tinfo->yellow_zone_boundary - tinfo->red_zone_boundary; if(mmap(tinfo->red_zone_boundary, pagesize, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, 0, 0) == 0){ perror("mmap failed"), exit(1); } mprotect(tinfo->red_zone_boundary, pagesize, PROT_READ | PROT_WRITE); tinfo->yellow_zone_boundary = 0; } static void signal_handler(int sig, siginfo_t* sig_info, void* sig_data){ if(sig == SIGSEGV){ ThreadInfo* tinfo = (ThreadInfo*) pthread_getspecific(thread_info_key); char* fault_address = (char*) sig_info->si_addr; if(is_in_stack(tinfo, fault_address)){ if(is_in_red_zone(tinfo, fault_address)){ siglongjmp(tinfo->return_point, 1); }else if(is_in_yellow_zone(tinfo, fault_address)){ reset_yellow_zone(tinfo); yellow_zone_hook(); gofromyellow = true; return; } else { //inside stack not related overflow SEGV happen } } } } static void register_application_info(){ pthread_key_create(&thread_info_key, NULL); sigemptyset(&newAct.sa_mask); sigaddset(&newAct.sa_mask, SIGSEGV); newAct.sa_sigaction = signal_handler; newAct.sa_flags = SA_SIGINFO | SA_RESTART | SA_ONSTACK; sigaction(SIGSEGV, &newAct, &oldAct); } static void register_thread_info(ThreadInfo* tinfo){ stack_t ss; pthread_setspecific(thread_info_key, tinfo); get_stack_info((void**)&tinfo->stack_pointer, &tinfo->stack_size); printf("stack size %d mb\n", tinfo->stack_size/1024/1024 ); tinfo->red_zone_boundary = tinfo->stack_pointer + tinfo->red_zone_size; set_yellow_zone(tinfo); ss.ss_sp = (char*)malloc(ALT_STACK_SIZE); ss.ss_size = ALT_STACK_SIZE; ss.ss_flags = 0; sigaltstack(&ss, NULL); } static void* thread_routine(void* p){ ThreadInfo* tinfo = (ThreadInfo*)p; register_thread_info(tinfo); if(sigsetjmp(tinfo->return_point, 1) == 0){ main_routine(); } else { stackoverflow_routine(); } free(tinfo); printf("after tinfo, end thread\n"); return 0; } int main(int argc, char** argv){ register_application_info(); if( argc == 2 ){ int stacksize = atoi(argv[1]); pthread_attr_t attr; pthread_attr_init(&attr); pthread_attr_setstacksize(&attr, 1024 * 1024 * stacksize); { pthread_t pid0; ThreadInfo* tinfo = (ThreadInfo*)calloc(1, sizeof(ThreadInfo)); pthread_attr_getguardsize(&attr, &tinfo->red_zone_size); pthread_create(&pid0, &attr, thread_routine, tinfo); pthread_join(pid0, NULL); } } else { printf("Usage: %s stacksize(mb)\n", argv[0]); } return 0; } C language in linux, ubuntu

Read the article

Using James Server in Eclipse With JavaMail

- by Jack Sparrow

Would anyone be able to tell me how I can go about using James server as my server with Java in Eclipse? I'm trying to test the two classes posted below but i get the following error: Exception in thread "main" javax.mail.AuthenticationFailedException: Authentication failed. public class JamesConfigTest { public static void main(String[] args) throws Exception { // CREATE CLIENT INSTANCES MailClient redClient = new MailClient("red", "localhost"); MailClient greenClient = new MailClient("green", "localhost"); MailClient blueClient = new MailClient("blue", "localhost"); // CLEAR EVERYBODY'S INBOX redClient.checkInbox(MailClient.CLEAR_MESSAGES); greenClient.checkInbox(MailClient.CLEAR_MESSAGES); blueClient.checkInbox(MailClient.CLEAR_MESSAGES); Thread.sleep(500); // Let the server catch up // SEND A COUPLE OF MESSAGES TO BLUE (FROM RED AND GREEN) redClient.sendMessage( "blue@localhost", "Testing blue from red", "This is a test message"); greenClient.sendMessage( "blue@localhost", "Testing blue from green", "This is a test message"); Thread.sleep(500); // Let the server catch up // LIST MESSAGES FOR BLUE (EXPECT MESSAGES FROM RED AND GREEN) blueClient.checkInbox(MailClient.SHOW_AND_CLEAR); } } import java.io.*; import java.util.*; import javax.mail.*; import javax.mail.internet.*; public class MailClient extends Authenticator { public static final int SHOW_MESSAGES = 1; public static final int CLEAR_MESSAGES = 2; public static final int SHOW_AND_CLEAR = SHOW_MESSAGES + CLEAR_MESSAGES; protected String from; protected Session session; protected PasswordAuthentication authentication; public MailClient(String user, String host) { this(user, host, false); } public MailClient(String user, String host, boolean debug) { from = user + '@' + host; authentication = new PasswordAuthentication(user, user); Properties props = new Properties(); props.put("mail.user", user); props.put("mail.host", host); props.put("mail.debug", debug ? "true" : "false"); props.put("mail.store.protocol", "pop3"); props.put("mail.transport.protocol", "smtp"); session = Session.getInstance(props, this); } public PasswordAuthentication getPasswordAuthentication() { return authentication; } public void sendMessage( String to, String subject, String content) throws MessagingException { System.out.println("SENDING message from " + from + " to " + to); System.out.println(); MimeMessage msg = new MimeMessage(session); msg.addRecipients(Message.RecipientType.TO, to); msg.setSubject(subject); msg.setText(content); Transport.send(msg); } public void checkInbox(int mode) throws MessagingException, IOException { if (mode == 0) return; boolean show = (mode & SHOW_MESSAGES) > 0; boolean clear = (mode & CLEAR_MESSAGES) > 0; String action = (show ? "Show" : "") + (show && clear ? " and " : "") + (clear ? "Clear" : ""); System.out.println(action + " INBOX for " + from); Store store = session.getStore(); store.connect(); Folder root = store.getDefaultFolder(); Folder inbox = root.getFolder("inbox"); inbox.open(Folder.READ_WRITE); Message[] msgs = inbox.getMessages(); if (msgs.length == 0 && show) { System.out.println("No messages in inbox"); } for (int i = 0; i < msgs.length; i++) { MimeMessage msg = (MimeMessage)msgs[i]; if (show) { System.out.println(" From: " + msg.getFrom()[0]); System.out.println(" Subject: " + msg.getSubject()); System.out.println(" Content: " + msg.getContent()); } if (clear) { msg.setFlag(Flags.Flag.DELETED, true); } } inbox.close(true); store.close(); System.out.println(); } }

Read the article

Facebook Connect login button not rendering

- by tloflin

I'm trying to implement a Facebook Connect Single Sign-on site. I originally just had a Connect button (<fb:login-button>), which the user had to click every time they wanted to sign in. I now have the auto login and logout features working. That is, my site will detect a logged-in Facebook account and automatically authenticate them if it can find a match to one of my site's user accounts, and automatically deauthenticate if the Facebook session is lost. I also have a manual logout button that will log the user out of both my site and Facebook. All of those are working correctly, but now my original Connect button is intermittently not being rendered correctly. It just shows up as the plain XHTML (ie., it looks like plain text--not a button--and is unclickable), and no XFBML is applied. Here is the basic code: On every page: <body> {...} <script src="http://static.ak.connect.facebook.com/js/api_lib/v0.4/FeatureLoader.js.php" type="text/javascript"></script> <script type="text/javascript> FB.init('APIKey', '/xd_receiver.htm'); var isAuth; // isAuth determines if the user is authenticated on my site // it should be true on the logout page, false on the login page FB.ensureInit(function(){ var session = FB.Facebook.apiClient.get_session(); if (session && !isAuth) { PageMethods.FacebookLogin(session.uid, session.session_key, FBLogin, FBLoginFail); // This is an AJAX call that authenticates the user on my site. } else if(!session && isFBAuth) { PageMethods.FacebookLogout(FBLogout, FBLogoutFail); // This is an AJAX call that deauthenticates the user on my site. } // the callback functions do nothing at the moment }); </script> {...} </body> On the login page: (this page is not visible to logged in users) <body> {...} <script src="http://static.ak.connect.facebook.com/js/api_lib/v0.4/FeatureLoader.js.php" type="text/javascript"></script> <script type="text/javascript> FB.init('APIKey', '/xd_receiver.htm'); {...} // auto-auth code as on every page </script>  <fb:login-button v="2" onlogin="UserSignedIntoFB();" size="large" autologoutlink="true"><fb:intl>Login With Your Facebook Account</fb:intl></fb:login-button> <script type="text/javascript"> function UserSignedIntoFB() { {...} // posts back to the server which authenticates the user on my site & redirects } </script> {...} </body> On the logout page: (this page is not visible to logged out users) <body> {...} <script src="http://static.ak.connect.facebook.com/js/api_lib/v0.4/FeatureLoader.js.php" type="text/javascript"></script> <script type="text/javascript> FB.init('APIKey', '/xd_receiver.htm'); {...} // auto-auth code as on every page </script> <script type="text/javascript"> function FBLoggedOut() { {...} // posts back to the server which deauthenticates the user on my site & redirects to login } function Logout() { if (FB.Facebook.apiClient.get_session()) { FB.Connect.logout(FBLoggedOut); // logs out of Facebook if it's a Facebook account return false; } else { return true; // posts back if it's a non-Facebook account & redirects to login } } </script> <a onclick="return Logout();" href="postback_url">Sign Out</a> {...} </body> Some things I've already looked at: The automatic login and logout are working great. I can log in and out of Facebook on another tab and my site will notice the session changes and update accordingly. The logout seems to be working fine: when clicked, it deauthenticates the user and logs them out of Facebook, as intended. The issue seems to usually happen after a Facebook user is logged out, but it happens somewhat intermittently; it might happen before they ever login, and it goes away after a few minutes/refreshes. Some cookies are left over after the login/logout process, but deleting them does not fix the issue. Restarting the browser does not fix the issue. The user is definitely logged out of Facebook and my site when the problem occurs. I've checked for Facebook sessions and site authentication. All external script calls are being served up correctly. I have a suspicion that there's something else I need to be doing upon logout (like clearing session or cookies), but according to everything I've read about Facebook Connect, all I need to do is call the logout function (and deauthenticate on my server-side). I'm really at a loss; does anybody have any ideas what could be wrong?

Read the article

Silverlight Recruiting Application Part 6 - Adding an Interview Scheduling Module/View

Between the last post and this one I went ahead and carried the ideas for the Jobs module and view into the Applicants module and view- they're both doing more or less the same thing, except with different objects being at their core. Made for an easy cut-and-paste operation with a few items being switched from one to another. Now that we have the ability to add postings and applicants, wouldn't it be nice if we could schedule an interview? Of course it would! Scheduling Module I think you get the drift from previous posts that these project structures start looking somewhat similar. The interview scheduling module is no different than the rest- it gets a SchedulingModule.cs file at the root that inherits from IModule, and there is a single SchedulerView.xsml and SchedulerViewModel.cs setup for our V+VM. We have one unique concern as we enter into this- RadScheduler deals with AppointmentsSource, not ItemsSource, so there are some special considerations to take into account when planning this module. First, I need something which inherits from AppointmentBase. This is the core of the RadScheduler appointment, and if you are planning to do any form of custom appointment, you'll want it to inherit from this. Then you can add-on functionality as needed. Here is my addition to the mix, the InterviewAppointment: 01.public class InterviewAppointment : AppointmentBase 02.{ 03. private int _applicantID; 04. public int ApplicantID 05. { 06. get { return this._applicantID; } 07. set 08. { 09. if (_applicantID != value) 10. { 11. _applicantID = value; 12. OnPropertyChanged("ApplicantID"); 13. } 14. } 15. } 16. 17. private int _postingID; 18. public int PostingID 19. { 20. get { return _postingID; } 21. set 22. { 23. if (_postingID != value) 24. { 25. _postingID = value; 26. OnPropertyChanged("PostingID"); 27. } 28. } 29. } 30. 31. private string _body; 32. public string Body 33. { 34. get { return _body; } 35. set 36. { 37. if (_body != value) 38. { 39. _body = value; 40. OnPropertyChanged("Body"); 41. } 42. } 43. } 44. 45. private int _interviewID; 46. public int InterviewID 47. { 48. get { return _interviewID; } 49. set 50. { 51. if (_interviewID != value) 52. { 53. _interviewID = value; 54. OnPropertyChanged("InterviewID"); 55. } 56. } 57. } 58. 59. public override IAppointment Copy() 60. { 61. IAppointment appointment = new InterviewAppointment(); 62. appointment.CopyFrom(this); 63. return appointment; 64. } 65. 66. public override void CopyFrom(IAppointment other) 67. { 68. base.CopyFrom(other); 69. var appointment = other as InterviewAppointment; 70. if (appointment != null) 71. { 72. ApplicantID = appointment.ApplicantID; 73. PostingID = appointment.PostingID; 74. Body = appointment.Body; 75. InterviewID = appointment.InterviewID; 76. } 77. } 78.} Nothing too exciting going on here, we just make sure that our custom fields are persisted (specifically set in CopyFrom at the bottom) and notifications are fired- otherwise this ends up exactly like the standard appointment as far as interactions, etc. But if we've got custom appointment items... that also means we need to customize what our appointment dialog window will look like. Customizing the Edit Appointment Dialog This initially sounds a lot more intimidating than it really is. The first step here depends on what you're dealing with for theming, but for ease of everything I went ahead and extracted my templates in Blend for RadScheduler so I could modify it as I pleased. For the faint of heart, the RadScheduler template is a few thousand lines of goodness since there are some very complex things going on in that control. I've gone ahead and trimmed down the template parts I don't need as much as possible, so what is left is all that is relevant to the Edit Appointment Dialog. Here's the resulting Xaml, with line numbers, so I can explain further: 001.<UserControl.Resources> 002.  003. <helpers:DataContextProxy x:Key="DataContextProxy" /> 004. 005. <telerik:Windows7Theme x:Key="Theme" /> 006. <SolidColorBrush x:Key="DialogWindowBackground" 007. Color="White" /> 008. <SolidColorBrush x:Key="CategorySelectorBorderBrush" 009. Color="#FFB1B1B1" /> 010. <LinearGradientBrush x:Key="RadToolBar_InnerBackground" 011. EndPoint="0.5,1" 012. StartPoint="0.5,0"> 013. <GradientStop Color="#FFFDFEFF" 014. Offset="0" /> 015. <GradientStop Color="#FFDDE9F7" 016. Offset="1" /> 017. <GradientStop Color="#FFE6F0FA" 018. Offset="0.5" /> 019. <GradientStop Color="#FFDCE6F4" 020. Offset="0.5" /> 021. </LinearGradientBrush> 022. <Style x:Key="FormElementTextBlockStyle" 023. TargetType="TextBlock"> 024. <Setter Property="HorizontalAlignment" 025. Value="Right" /> 026. <Setter Property="VerticalAlignment" 027. Value="Top" /> 028. <Setter Property="Margin" 029. Value="15, 15, 0, 2" /> 030. </Style> 031. <Style x:Key="FormElementStyle" 032. TargetType="FrameworkElement"> 033. <Setter Property="Margin" 034. Value="10, 10, 0, 2" /> 035. </Style> 036. <SolidColorBrush x:Key="GenericShallowBorderBrush" 037. Color="#FF979994" /> 038. <telerik:BooleanToVisibilityConverter x:Key="BooleanToVisibilityConverter" /> 039. <telerikScheduler:ImportanceToBooleanConverter x:Key="ImportanceToBooleanConverter" /> 040. <telerikScheduler:NullToVisibilityConverter x:Key="NullToVisibilityConverter" /> 041. <telerikScheduler:InvertedNullToVisibilityConverter x:Key="InvertedNullToVisibilityConverter" /> 042. <scheduler:ResourcesSeparatorConverter x:Key="ResourcesSeparatorConverter" /> 043. <DataTemplate x:Key="IconDataEditTemplate"> 044. <Image Source="/Telerik.Windows.Controls.Scheduler;component/Themes/Office/Images/cal.png" 045. Margin="3,3,0,0" 046. Width="16" 047. Height="16" /> 048. </DataTemplate> 049. <DataTemplate x:Key="SingleSelectionTemplate"> 050. <Grid VerticalAlignment="Stretch" 051. HorizontalAlignment="Stretch"> 052. <Grid.RowDefinitions> 053. <RowDefinition Height="Auto" /> 054. </Grid.RowDefinitions> 055. <Grid.ColumnDefinitions> 056. <ColumnDefinition Width="Auto" 057. MinWidth="84" /> 058. <ColumnDefinition Width="Auto" 059. MinWidth="200" /> 060. </Grid.ColumnDefinitions> 061. <TextBlock x:Name="SelectionNameLabel" 062. Margin="0,13,4,2" 063. Text="{Binding ResourceType.DisplayName}" 064. Style="{StaticResource FormElementTextBlockStyle}" 065. Grid.Column="0" /> 066. <telerikInput:RadComboBox ItemsSource="{Binding ResourceItems}" 067. Width="185" 068. Margin="5,10,20,2" 069. HorizontalAlignment="Left" 070. Grid.Column="1" 071. ClearSelectionButtonVisibility="Visible" 072. ClearSelectionButtonContent="Clear All" 073. DisplayMemberPath="Resource.DisplayName" 074. telerik:StyleManager.Theme="{StaticResource Theme}" 075. SelectedItem="{Binding SelectedItem, Mode=TwoWay}" /> 076. </Grid> 077. </DataTemplate> 078. <DataTemplate x:Key="MultipleSelectionTemplate"> 079. <Grid VerticalAlignment="Stretch" 080. HorizontalAlignment="Stretch"> 081. <Grid.RowDefinitions> 082. <RowDefinition Height="Auto" /> 083. </Grid.RowDefinitions> 084. <Grid.ColumnDefinitions> 085. <ColumnDefinition Width="Auto" 086. MinWidth="84" /> 087. <ColumnDefinition Width="Auto" 088. MinWidth="200" /> 089. </Grid.ColumnDefinitions> 090. <TextBlock x:Name="SelectionNameLabel" 091. Grid.Column="0" 092. Text="{Binding ResourceType.DisplayName}" 093. Margin="0,13,4,2" 094. Style="{StaticResource FormElementTextBlockStyle}" /> 095. <telerikInput:RadComboBox Grid.Column="1" 096. Width="185" 097. HorizontalAlignment="Left" 098. Margin="5,10,20,2" 099. ItemsSource="{Binding ResourceItems}" 100. SelectedIndex="{Binding SelectedIndex, Mode=TwoWay}" 101. ClearSelectionButtonVisibility="Visible" 102. ClearSelectionButtonContent="Clear All" 103. telerik:StyleManager.Theme="{StaticResource Theme}"> 104. <telerikInput:RadComboBox.ItemTemplate> 105. <DataTemplate> 106. <Grid HorizontalAlignment="Stretch" 107. VerticalAlignment="Stretch"> 108. <CheckBox VerticalAlignment="Center" 109. HorizontalContentAlignment="Stretch" 110. VerticalContentAlignment="Center" 111. IsChecked="{Binding IsChecked, Mode=TwoWay}" 112. Content="{Binding Resource.DisplayName}"> 113. <CheckBox.ContentTemplate> 114. <DataTemplate> 115. <TextBlock HorizontalAlignment="Stretch" 116. VerticalAlignment="Stretch" 117. Text="{Binding Content, RelativeSource={RelativeSource TemplatedParent}}" /> 118. </DataTemplate> 119. </CheckBox.ContentTemplate> 120. </CheckBox> 121. </Grid> 122. </DataTemplate> 123. </telerikInput:RadComboBox.ItemTemplate> 124. </telerikInput:RadComboBox> 125. </Grid> 126. </DataTemplate> 127. <scheduler:ResourceTypeTemplateSelector x:Key="ItemTemplateSelector" 128. MultipleSelectionTemplate="{StaticResource MultipleSelectionTemplate}" 129. SingleSelectionTemplate="{StaticResource SingleSelectionTemplate}" /> 130.  131. 132. <ControlTemplate x:Key="EditAppointmentTemplate" 133. TargetType="telerikScheduler:AppointmentDialogWindow"> 134. <StackPanel Background="{TemplateBinding Background}" 135. UseLayoutRounding="True"> 136. <StackPanel Grid.Row="0" 137. Orientation="Horizontal" 138. Background="{StaticResource RadToolBar_InnerBackground}" 139. Grid.ColumnSpan="2" 140. Height="0"> 141.  142. <Border Margin="1,1,0,0" 143. Background="#50000000" 144. HorizontalAlignment="Left" 145. VerticalAlignment="Center" 146. Width="2" 147. Height="16"> 148. <Border Margin="0,0,1,1" 149. Background="#80FFFFFF" 150. HorizontalAlignment="Left" 151. Width="1" /> 152. </Border> 153. <Border Margin="1,1,0,0" 154. Background="#50000000" 155. HorizontalAlignment="Left" 156. VerticalAlignment="Center" 157. Width="2" 158. Height="16"> 159. <Border Margin="0,0,1,1" 160. Background="#80FFFFFF" 161. HorizontalAlignment="Left" 162. Width="1" /> 163. </Border> 164. <TextBlock telerik:LocalizationManager.ResourceKey="ShowAs" 165. VerticalAlignment="Center" 166. Margin="5,0,0,0" /> 167. <telerikInput:RadComboBox ItemsSource="{TemplateBinding TimeMarkers}" 168. Width="100" 169. Height="20" 170. VerticalAlignment="Center" 171. Margin="5,0,0,0" 172. ClearSelectionButtonVisibility="Visible" 173. ClearSelectionButtonContent="Clear" 174. SelectedItem="{Binding TimeMarker,RelativeSource={RelativeSource TemplatedParent},Mode=TwoWay}" 175. telerik:StyleManager.Theme="{StaticResource Theme}"> 176. <telerikInput:RadComboBox.ItemTemplate> 177. <DataTemplate> 178. <StackPanel Orientation="Horizontal"> 179. <Rectangle Fill="{Binding TimeMarkerBrush}" 180. Margin="2" 181. Width="12" 182. Height="12" /> 183. <TextBlock Text="{Binding TimeMarkerName}" 184. Margin="2" /> 185. </StackPanel> 186. </DataTemplate> 187. </telerikInput:RadComboBox.ItemTemplate> 188. </telerikInput:RadComboBox> 189. <telerik:RadToggleButton x:Name="High" 190. BorderThickness="0" 191. Background="{StaticResource RadToolBar_InnerBackground}" 192. DataContext="{TemplateBinding EditedAppointment}" 193. telerik:StyleManager.Theme="{StaticResource Theme}" 194. IsChecked="{Binding Importance,Mode=TwoWay, Converter={StaticResource ImportanceToBooleanConverter},ConverterParameter=High}" 195. Margin="2,2,0,2" 196. Width="23" 197. Height="23" 198. HorizontalContentAlignment="Center" 199. ToolTipService.ToolTip="High importance" 200. CommandParameter="High" 201. Command="telerikScheduler:RadSchedulerCommands.SetAppointmentImportance"> 202. <StackPanel HorizontalAlignment="Center"> 203. <Path Stretch="Fill" 204. Height="10" 205. HorizontalAlignment="Center" 206. VerticalAlignment="Top" 207. Width="5.451" 208. Data="M200.39647,58.840393 C200.39337,58.336426 201.14566,57.683922 202.56244,57.684292 C204.06589,57.684685 204.73764,58.357765 204.72783,58.992363 C205.04649,61.795574 203.04713,64.181099 202.47388,66.133446 C201.93753,64.154961 199.9471,61.560352 200.39647,58.840393 z"> 209. <Path.Fill> 210. <LinearGradientBrush EndPoint="1.059,0.375" 211. StartPoint="-0.457,0.519"> 212. <GradientStop Color="#FFFF0606" 213. Offset="0.609" /> 214. <GradientStop Color="#FFBF0303" 215. Offset="0.927" /> 216. </LinearGradientBrush> 217. </Path.Fill> 218. </Path> 219. <Ellipse Height="3" 220. HorizontalAlignment="Center" 221. Margin="0,-1,0,0" 222. VerticalAlignment="Top" 223. Width="3"> 224. <Ellipse.Fill> 225. <RadialGradientBrush> 226. <GradientStop Color="#FFFF0606" 227. Offset="0" /> 228. <GradientStop Color="#FFBF0303" 229. Offset="1" /> 230. </RadialGradientBrush> 231. </Ellipse.Fill> 232. </Ellipse> 233. </StackPanel> 234. </telerik:RadToggleButton> 235. <telerik:RadToggleButton x:Name="Low" 236. HorizontalContentAlignment="Center" 237. BorderThickness="0" 238. Background="{StaticResource RadToolBar_InnerBackground}" 239. DataContext="{TemplateBinding EditedAppointment}" 240. IsChecked="{Binding Importance,Mode=TwoWay, Converter={StaticResource ImportanceToBooleanConverter},ConverterParameter=Low}" 241. Margin="0,2,0,2" 242. Width="23" 243. Height="23" 244. ToolTipService.ToolTip="Low importance" 245. CommandParameter="Low" 246. telerik:StyleManager.Theme="{StaticResource Theme}" 247. Command="telerikScheduler:RadSchedulerCommands.SetAppointmentImportance"> 248. <Path Stretch="Fill" 249. Height="12" 250. HorizontalAlignment="Center" 251. VerticalAlignment="Top" 252. Width="9" 253. Data="M222.40353,60.139881 L226.65768,60.139843 L226.63687,67.240196 L229.15347,67.240196 L224.37816,71.394943 L219.65274,67.240196 L222.37572,67.219345 z" 254. Stroke="#FF0365A7"> 255. <Path.Fill> 256. <LinearGradientBrush EndPoint="1.059,0.375" 257. StartPoint="-0.457,0.519"> 258. <GradientStop Color="#FFBBE4FF" /> 259. <GradientStop Color="#FF024572" 260. Offset="0.836" /> 261. <GradientStop Color="#FF43ADF4" 262. Offset="0.466" /> 263. </LinearGradientBrush> 264. </Path.Fill> 265. </Path> 266. </telerik:RadToggleButton> 267. </StackPanel > 268. <Border DataContext="{TemplateBinding EditedAppointment}" 269. Background="{Binding Category.CategoryBrush}" 270. Visibility="{Binding Category,Converter={StaticResource NullToVisibilityConverter}}" 271. CornerRadius="3" 272. Height="20" 273. Margin="5,10,5,0"> 274. <TextBlock Text="{Binding Category.DisplayName}" 275. VerticalAlignment="Center" 276. Margin="5,0,0,0" /> 277. </Border> 278. <Grid VerticalAlignment="Stretch" 279. HorizontalAlignment="Stretch" 280. DataContext="{TemplateBinding EditedAppointment}" 281. Background="{TemplateBinding Background}"> 282. <Grid.RowDefinitions> 283. <RowDefinition Height="Auto" /> 284. <RowDefinition Height="Auto" /> 285. <RowDefinition Height="Auto" /> 286. <RowDefinition Height="Auto" /> 287. <RowDefinition Height="Auto" /> 288. <RowDefinition Height="Auto" /> 289. <RowDefinition Height="Auto" /> 290. <RowDefinition Height="Auto" /> 291. <RowDefinition Height="Auto" /> 292. <RowDefinition Height="Auto" /> 293. </Grid.RowDefinitions> 294. <Grid.ColumnDefinitions> 295. <ColumnDefinition Width="Auto" 296. MinWidth="100" /> 297. <ColumnDefinition Width="Auto" 298. MinWidth="200" /> 299. </Grid.ColumnDefinitions> 300.  301. <TextBlock x:Name="SubjectLabel" 302. Grid.Row="0" 303. Grid.Column="0" 304. Margin="0,15,0,2" 305. telerik:LocalizationManager.ResourceKey="Subject" 306. Style="{StaticResource FormElementTextBlockStyle}" /> 307. <TextBox x:Name="Subject" 308. Grid.Row="0" 309. Grid.Column="1" 310. MinHeight="22" 311. Padding="4 2" 312. Width="340" 313. HorizontalAlignment="Left" 314. Text="{Binding Subject, Mode=TwoWay}" 315. MaxLength="255" 316. telerik:StyleManager.Theme="{StaticResource Theme}" 317. Margin="10,12,20,2" /> 318.  319. <TextBlock x:Name="DescriptionLabel" 320. Grid.Row="1" 321. Grid.Column="0" 322. Margin="0,13,0,2" 323. telerik:LocalizationManager.ResourceKey="Body" 324. Style="{StaticResource FormElementTextBlockStyle}" /> 325. <TextBox x:Name="Body" 326. VerticalAlignment="top" 327. Grid.Row="1" 328. Grid.Column="1" 329. Height="Auto" 330. MaxHeight="82" 331. Width="340" 332. HorizontalAlignment="Left" 333. MinHeight="22" 334. Padding="4 2" 335. TextWrapping="Wrap" 336. telerik:StyleManager.Theme="{StaticResource Theme}" 337. Text="{Binding Body, Mode=TwoWay}" 338. AcceptsReturn="true" 339. Margin="10,10,20,2" 340. HorizontalScrollBarVisibility="Auto" 341. VerticalScrollBarVisibility="Auto" /> 342.  343. <TextBlock x:Name="StartDateLabel" 344. Grid.Row="2" 345. Grid.Column="0" 346. Margin="0,13,0,2" 347. telerik:LocalizationManager.ResourceKey="StartTime" 348. Style="{StaticResource FormElementTextBlockStyle}" /> 349. <telerikScheduler:DateTimePicker x:Name="StartDateTime" 350. Height="22" 351. Grid.Row="2" 352. Grid.Column="1" 353. HorizontalAlignment="Left" 354. Margin="10,10,20,2" 355. Style="{StaticResource FormElementStyle}" 356. SelectedDateTime="{Binding Start, Mode=TwoWay}" 357. telerikScheduler:StartEndDatePicker.EndPicker="{Binding ElementName=EndDateTime}" 358. IsTabStop="False" 359. IsEnabled="False" /> 360. <TextBlock x:Name="EndDateLabel" 361. Grid.Row="3" 362. Grid.Column="0" 363. Margin="0,13,0,2" 364. telerik:LocalizationManager.ResourceKey="EndTime" 365. Style="{StaticResource FormElementTextBlockStyle}" /> 366. <telerikScheduler:DateTimePicker x:Name="EndDateTime" 367. Height="22" 368. Grid.Row="3" 369. Grid.Column="1" 370. HorizontalAlignment="Left" 371. Margin="10,10,20,2" 372. Style="{StaticResource FormElementStyle}" 373. IsTabStop="False" 374. IsEnabled="False" 375. SelectedDateTime="{Binding End, Mode=TwoWay}" /> 376.  377. <CheckBox x:Name="AllDayEventCheckbox" 378. IsChecked="{Binding IsAllDayEvent, Mode=TwoWay}" 379. Grid.Row="4" 380. Grid.Column="1" 381. Margin="10,10,20,2" 382. HorizontalAlignment="Left" 383. telerik:StyleManager.Theme="{StaticResource Theme}" 384. telerik:LocalizationManager.ResourceKey="AllDayEvent"> 385. <telerik:CommandManager.InputBindings> 386. <telerik:InputBindingCollection> 387. <telerik:MouseBinding Command="telerikScheduler:RadSchedulerCommands.ChangeTimePickersVisibility" 388. Gesture="LeftClick" /> 389. </telerik:InputBindingCollection> 390. </telerik:CommandManager.InputBindings> 391. </CheckBox> 392. <Grid Grid.Row="5" 393. Grid.ColumnSpan="2"> 394. <Grid.ColumnDefinitions> 395. <ColumnDefinition Width="Auto" 396. MinWidth="100" /> 397. <ColumnDefinition Width="Auto" 398. MinWidth="200" /> 399. </Grid.ColumnDefinitions> 400. <Grid.RowDefinitions> 401. <RowDefinition Height="Auto" /> 402. <RowDefinition Height="Auto" /> 403. </Grid.RowDefinitions> 404. <TextBlock Text="Applicant" 405. Margin="0,13,0,2" 406. Style="{StaticResource FormElementTextBlockStyle}" /> 407. <telerikInput:RadComboBox IsEditable="False" 408. Grid.Column="1" 409. Height="24" 410. VerticalAlignment="Center" 411. ItemsSource="{Binding Source={StaticResource DataContextProxy}, Path=DataSource.ApplicantList}" 412. SelectedValue="{Binding ApplicantID, Mode=TwoWay}" 413. SelectedValuePath="ApplicantID" 414. DisplayMemberPath="FirstName" /> 415. 416. <TextBlock Text="Job" 417. Margin="0,13,0,2" 418. Grid.Row="1" 419. Style="{StaticResource FormElementTextBlockStyle}" /> 420. <telerikInput:RadComboBox IsEditable="False" 421. Grid.Column="1" 422. Grid.Row="1" 423. Height="24" 424. VerticalAlignment="Center" 425. ItemsSource="{Binding Source={StaticResource DataContextProxy}, Path=DataSource.JobsList}" 426. SelectedValue="{Binding PostingID, Mode=TwoWay}" 427. SelectedValuePath="PostingID" 428. DisplayMemberPath="JobTitle"/> 429. </Grid> 430.  431. <Grid x:Name="ResourcesLayout" 432. Grid.Row="7" 433. Grid.Column="0" 434. Grid.ColumnSpan="2" 435. MaxHeight="130" 436. Margin="20,5,20,0"> 437. <Border Margin="0" 438. BorderThickness="1" 439. BorderBrush="{StaticResource GenericShallowBorderBrush}" 440. Visibility="{Binding ElementName=ResourcesScrollViewer, Path=ComputedVerticalScrollBarVisibility}"></Border> 441. <ScrollViewer x:Name="ResourcesScrollViewer" 442. IsTabStop="false" 443. Grid.Row="6" 444. Grid.Column="0" 445. Grid.ColumnSpan="2" 446. Margin="1" 447. telerik:StyleManager.Theme="{StaticResource Theme}" 448. VerticalScrollBarVisibility="Auto"> 449. <scheduler:ResourcesItemsControl x:Name="PART_Resources" 450. HorizontalAlignment="Left" 451. Padding="0,2,0,5" 452. IsTabStop="false" 453. ItemsSource="{TemplateBinding ResourceTypeModels}" 454. ItemTemplateSelector="{StaticResource ItemTemplateSelector}" /> 455. </ScrollViewer> 456. </Grid> 457. <StackPanel x:Name="FooterControls" 458. Margin="5 10 10 10" 459. Grid.Row="8" 460. Grid.Column="1" 461. HorizontalAlignment="Left" 462. Orientation="Horizontal"> 463. <telerik:RadButton x:Name="OKButton" 464. Margin="5" 465. Padding="10 0" 466. MinWidth="80" 467. Command="telerikScheduler:RadSchedulerCommands.SaveAppointment" 468. telerik:StyleManager.Theme="{StaticResource Theme}" 469. telerikNavigation:RadWindow.ResponseButton="Accept" 470. telerik:LocalizationManager.ResourceKey="SaveAndCloseCommandText"> 471. </telerik:RadButton> 472. <telerik:RadButton x:Name="CancelButton" 473. Margin="5" 474. Padding="10 0" 475. MinWidth="80" 476. telerik:LocalizationManager.ResourceKey="Cancel" 477. telerik:StyleManager.Theme="{StaticResource Theme}" 478. telerikNavigation:RadWindow.ResponseButton="Cancel" 479. Command="telerik:WindowCommands.Close"> 480. </telerik:RadButton> 481. </StackPanel> 482. </Grid> 483. <vsm:VisualStateManager.VisualStateGroups> 484. <vsm:VisualStateGroup x:Name="RecurrenceRuleState"> 485. <vsm:VisualState x:Name="RecurrenceRuleIsNull"> 486. <Storyboard> 487. <ObjectAnimationUsingKeyFrames Storyboard.TargetName="StartDateTime" 488. Storyboard.TargetProperty="IsEnabled" 489. Duration="0"> 490. <DiscreteObjectKeyFrame KeyTime="0" 491. Value="True" /> 492. </ObjectAnimationUsingKeyFrames> 493. <ObjectAnimationUsingKeyFrames Storyboard.TargetName="EndDateTime" 494. Storyboard.TargetProperty="IsEnabled" 495. Duration="0"> 496. <DiscreteObjectKeyFrame KeyTime="0" 497. Value="True" /> 498. </ObjectAnimationUsingKeyFrames> 499. <ObjectAnimationUsingKeyFrames Storyboard.TargetName="AllDayEventCheckbox" 500. Storyboard.TargetProperty="IsEnabled" 501. Duration="0"> 502. <DiscreteObjectKeyFrame KeyTime="0" 503. Value="True" /> 504. </ObjectAnimationUsingKeyFrames> 505. </Storyboard> 506. </vsm:VisualState> 507. <vsm:VisualState x:Name="RecurrenceRuleIsNotNull"> 508. <Storyboard> 509. <ObjectAnimationUsingKeyFrames Storyboard.TargetName="StartDateTime" 510. Storyboard.TargetProperty="IsEnabled" 511. Duration="0"> 512. <DiscreteObjectKeyFrame KeyTime="0" 513. Value="False" /> 514. </ObjectAnimationUsingKeyFrames> 515. <ObjectAnimationUsingKeyFrames Storyboard.TargetName="EndDateTime" 516. Storyboard.TargetProperty="IsEnabled" 517. Duration="0"> 518. <DiscreteObjectKeyFrame KeyTime="0" 519. Value="False" /> 520. </ObjectAnimationUsingKeyFrames> 521. <ObjectAnimationUsingKeyFrames Storyboard.TargetName="AllDayEventCheckbox" 522. Storyboard.TargetProperty="IsEnabled" 523. Duration="0"> 524. <DiscreteObjectKeyFrame KeyTime="0" 525. Value="False" /> 526. </ObjectAnimationUsingKeyFrames> 527. </Storyboard> 528. </vsm:VisualState> 529. </vsm:VisualStateGroup> 530. </vsm:VisualStateManager.VisualStateGroups> 531. </StackPanel> 532. </ControlTemplate> 533. <DataTemplate x:Key="AppointmentDialogWindowHeaderDataTemplate"> 534. <StackPanel Orientation="Horizontal" 535. MaxWidth="400"> 536. <TextBlock telerik:LocalizationManager.ResourceKey="Event" 537. Visibility="{Binding Appointment.IsAllDayEvent, Converter={StaticResource BooleanToVisibilityConverter}}" /> 538. <TextBlock telerik:LocalizationManager.ResourceKey="Appointment" 539. Visibility="{Binding Appointment.IsAllDayEvent, Converter={StaticResource InvertedBooleanToVisibilityConverter}}" /> 540. <TextBlock Text=" - " /> 541. <TextBlock x:Name="SubjectTextBlock" 542. Visibility="{Binding Appointment.Subject, Converter={StaticResource NullToVisibilityConverter}}" 543. Text="{Binding Appointment.Subject}" /> 544. <TextBlock telerik:LocalizationManager.ResourceKey="Untitled" 545. Visibility="{Binding Appointment.Subject, Converter={StaticResource InvertedNullToVisibilityConverter}}" /> 546. </StackPanel> 547. </DataTemplate> 548. <Style x:Key="EditAppointmentStyle" 549. TargetType="telerikScheduler:AppointmentDialogWindow"> 550. <Setter Property="IconTemplate" 551. Value="{StaticResource IconDataEditTemplate}" /> 552. <Setter Property="HeaderTemplate" 553. Value="{StaticResource AppointmentDialogWindowHeaderDataTemplate}" /> 554. <Setter Property="Background" 555. Value="{StaticResource DialogWindowBackground}" /> 556. <Setter Property="Template" 557. Value="{StaticResource EditAppointmentTemplate}" /> 558. </Style> 559.</UserControl.Resources> The first line there is the DataContextProxy I mentioned previously- we use that again to work a bit of magic in this template. Where we start getting into the dialog in question is line 132, but line 407 is where things start getting interesting. The ItemsSource is pointing at a list that exists in my ViewModel (or code-behind, if it is used as a DataContext), the SelectedValue is the item I am actually binding from the applicant (note the TwoWay binding), and SelectedValuePath and DisplayMemberPath ensure the proper applicant is being displayed from the collection. You will also see similar starting on line 420 where I do the same for the Jobs we'll be displaying. Just to wrap-up the Xaml, here's the RadScheduler declaraction that ties this all together and will be the main focus of our view: 01.<telerikScheduler:RadScheduler x:Name="xJobsScheduler" 02. Grid.Row="1" 03. Grid.Column="1" 04. Width="800" 05. MinWidth="600" 06. Height="500" 07. MinHeight="300" 08. AppointmentsSource="{Binding Interviews}" 09. EditAppointmentStyle="{StaticResource EditAppointmentStyle}" 10. command:AppointmentAddedEventClass.Command="{Binding AddAppointmentCommand}" 11. command:ApptCreatedEventClass.Command="{Binding ApptCreatingCommand}" 12. command:ApptEditedEventClass.Command="{Binding ApptEditedCommand}" 13. command:ApptDeletedEventClass.Command="{Binding ApptDeletedCommand}"> 14.</telerikScheduler:RadScheduler> Now, we get to the ViewModel and what it takes to get that rigged up. And for those of you who remember the jobs post, those command:s in the Xaml are pointing to attached behavior commands that reproduce the respective events. This becomes very handy when we're setting up the code-behind version. ;) ViewModel I've been liking this approach so far, so I'm going to put the entire ViewModel here and then go into the lines of interest. Of course, feel free to ask me questions about anything that isn't clear (by line number, ideally) so I can help out if I have missed anything important: 001.public class SchedulerViewModel : ViewModelBase 002.{ 003. private readonly IEventAggregator eventAggregator; 004. private readonly IRegionManager regionManager; 005. 006. public RecruitingContext context; 007. 008. private ObservableItemCollection<InterviewAppointment> _interviews = new ObservableItemCollection<InterviewAppointment>(); 009. public ObservableItemCollection<InterviewAppointment> Interviews 010. { 011. get { return _interviews; } 012. set 013. { 014. if (_interviews != value) 015. { 016. _interviews = value; 017. NotifyChanged("Interviews"); 018. } 019. } 020. } 021. 022. private QueryableCollectionView _jobsList; 023. public QueryableCollectionView JobsList 024. { 025. get { return this._jobsList; } 026. set 027. { 028. if (this._jobsList != value) 029. { 030. this._jobsList = value; 031. this.NotifyChanged("JobsList"); 032. } 033. } 034. } 035. 036. private QueryableCollectionView _applicantList; 037. public QueryableCollectionView ApplicantList 038. { 039. get { return _applicantList; } 040. set 041. { 042. if (_applicantList != value) 043. { 044. _applicantList = value; 045. NotifyChanged("ApplicantList"); 046. } 047. } 048. } 049. 050. public DelegateCommand<object> AddAppointmentCommand { get; set; } 051. public DelegateCommand<object> ApptCreatingCommand { get; set; } 052. public DelegateCommand<object> ApptEditedCommand { get; set; } 053. public DelegateCommand<object> ApptDeletedCommand { get; set; } 054. 055. public SchedulerViewModel(IEventAggregator eventAgg, IRegionManager regionmanager) 056. { 057. // set Unity items 058. this.eventAggregator = eventAgg; 059. this.regionManager = regionmanager; 060. 061. // load our context 062. context = new RecruitingContext(); 063. LoadOperation<Interview> loadOp = context.Load(context.GetInterviewsQuery()); 064. loadOp.Completed += new EventHandler(loadOp_Completed); 065. 066. this._jobsList = new QueryableCollectionView(context.JobPostings); 067. context.Load(context.GetJobPostingsQuery()); 068. 069. this._applicantList = new QueryableCollectionView(context.Applicants); 070. context.Load(context.GetApplicantsQuery()); 071. 072. AddAppointmentCommand = new DelegateCommand<object>(this.AddAppt); 073. ApptCreatingCommand = new DelegateCommand<object>(this.ApptCreating); 074. ApptEditedCommand = new DelegateCommand<object>(this.ApptEdited); 075. ApptDeletedCommand = new DelegateCommand<object>(this.ApptDeleted); 076. 077. } 078. 079. void loadOp_Completed(object sender, EventArgs e) 080. { 081. LoadOperation loadop = sender as LoadOperation; 082. 083. foreach (var ent in loadop.Entities) 084. { 085. _interviews.Add(EntityToAppointment(ent as Interview)); 086. } 087. } 088. 089. #region Appointment Adding 090. 091. public void AddAppt(object obj) 092. { 093. // now we have a new InterviewAppointment to add to our QCV :) 094. InterviewAppointment newInterview = obj as InterviewAppointment; 095. 096. this.context.Interviews.Add(AppointmentToEntity(newInterview)); 097. this.context.SubmitChanges((s) => 098. { 099. ActionHistory myAction = new ActionHistory(); 100. myAction.InterviewID = newInterview.InterviewID; 101. myAction.PostingID = newInterview.PostingID; 102. myAction.ApplicantID = newInterview.ApplicantID; 103. myAction.Description = String.Format("Interview with {0} has been created by {1}", newInterview.ApplicantID.ToString(), "default user"); 104. myAction.TimeStamp = DateTime.Now; 105. eventAggregator.GetEvent<AddActionEvent>().Publish(myAction); 106. } 107. , null); 108. } 109. 110. public void ApptCreating(object obj) 111. { 112. // handled in the behavior, just a placeholder to ensure it runs :) 113. } 114. 115. #endregion 116. 117. #region Appointment Editing 118. 119. public void ApptEdited(object obj) 120. { 121. Interview editedInterview = (from x in context.Interviews 122. where x.InterviewID == (obj as InterviewAppointment).InterviewID 123. select x).SingleOrDefault(); 124. 125. CopyAppointmentEdit(editedInterview, obj as InterviewAppointment); 126. 127. context.SubmitChanges((s) => { 128. ActionHistory myAction = new ActionHistory(); 129. myAction.InterviewID = editedInterview.InterviewID; 130. myAction.PostingID = editedInterview.PostingID; 131. myAction.ApplicantID = editedInterview.ApplicantID; 132. myAction.Description = String.Format("Interview with {0} has been modified by {1}", editedInterview.ApplicantID.ToString(), "default user"); 133. myAction.TimeStamp = DateTime.Now; 134. eventAggregator.GetEvent<AddActionEvent>().Publish(myAction); } 135. , null); 136. } 137. 138. #endregion 139. 140. #region Appointment Deleting 141. 142. public void ApptDeleted(object obj) 143. { 144. Interview deletedInterview = (from x in context.Interviews 145. where x.InterviewID == (obj as InterviewAppointment).InterviewID 146. select x).SingleOrDefault(); 147. 148. context.Interviews.Remove(deletedInterview); 149. context.SubmitChanges((s) => 150. { 151. ActionHistory myAction = new ActionHistory(); 152. myAction.InterviewID = deletedInterview.InterviewID; 153. myAction.PostingID = deletedInterview.PostingID; 154. myAction.ApplicantID = deletedInterview.ApplicantID; 155. myAction.Description = String.Format("Interview with {0} has been deleted by {1}", deletedInterview.ApplicantID.ToString(), "default user"); 156. myAction.TimeStamp = DateTime.Now; 157. eventAggregator.GetEvent<AddActionEvent>().Publish(myAction); 158. } 159. , null); 160. } 161. 162. #endregion 163. 164. #region Appointment Helpers :) 165. 166. public Interview AppointmentToEntity(InterviewAppointment ia) 167. { 168. Interview newInterview = new Interview(); 169. newInterview.Subject = ia.Subject; 170. newInterview.Body = ia.Body; 171. newInterview.Start = ia.Start; 172. newInterview.End = ia.End; 173. newInterview.ApplicantID = ia.ApplicantID; 174. newInterview.PostingID = ia.PostingID; 175. newInterview.InterviewID = ia.InterviewID; 176. 177. return newInterview; 178. } 179. 180. public InterviewAppointment EntityToAppointment(Interview ia) 181. { 182. InterviewAppointment newInterview = new InterviewAppointment(); 183. newInterview.Subject = ia.Subject; 184. newInterview.Body = ia.Body; 185. newInterview.Start = ia.Start; 186. newInterview.End = ia.End; 187. newInterview.ApplicantID = ia.ApplicantID; 188. newInterview.PostingID = ia.PostingID; 189. newInterview.InterviewID = ia.InterviewID; 190. 191. return newInterview; 192. } 193. 194. public void CopyAppointmentEdit(Interview entityInterview, InterviewAppointment appointmentInterview) 195. { 196. entityInterview.Subject = appointmentInterview.Subject; 197. entityInterview.Body = appointmentInterview.Body; 198. entityInterview.Start = appointmentInterview.Start; 199. entityInterview.End = appointmentInterview.End; 200. entityInterview.ApplicantID = appointmentInterview.ApplicantID; 201. entityInterview.PostingID = appointmentInterview.PostingID; 202. } 203. 204. #endregion 205.} One thing we're doing here which you won't see in any of the other ViewModels is creating a duplicate collection. I know this is something which will be fixed down the line for using RadScheduler, simplifying this process, but with WCF RIA changing as it does I wanted to ensure functionality would remain consistent as I continued development on this application. So, I do a little bit of duplication, but for the greater good. This all takes place starting on line 79, so for every entity that comes back we add it to the collection that is bound to RadScheduler. Otherwise, the DelegateCommands that you see correspond directly to the events they are named after. In each case, rather than sending over the full event arguments, I just send in the appointment in question (coming through as the object obj in all cases) so I can add (line 91), edit (line 119), and delete appointments (line 142) like normal. This just ensures they get updated back to my database. Also, the one bit of code you won't see is for the Appointment Creating (line 110) event- that is because in the command I've created I simply make the replacement I need to: 1.void element_AppointmentCreating(object sender, AppointmentCreatingEventArgs e) 2.{ 3. e.NewAppointment = new InterviewAppointment(); 4. base.ExecuteCommand(); 5.} And the ViewModel is none the wiser, the appointments just work as far as it is concerned since as they are created they become InterviewAppointments. End result? I've customized my EditAppointmentDialog as follows: And adding, editing, and deleting appointments works like a charm. I can even 'edit' by moving appointments around RadScheduler, so as they are dropped into a timeslot they perform their full edit routine and things get updated. And then, the Code-Behind Version Perhaps the thing I like the most about doing one then the other is I get to steal 90% or more of the code from the MVVM version. For example, the only real changes to the Code-Behind Xaml file exist in the control declaration, in which I use events instead of attached-behavior-event-commands: 01.<telerikScheduler:RadScheduler x:Name="xJobsScheduler" 02. Grid.Row="1" 03. Grid.Column="1" 04. Width="800" 05. MinWidth="600" 06. Height="500" 07. MinHeight="300" 08. EditAppointmentStyle="{StaticResource EditAppointmentStyle}" 09. AppointmentAdded="xJobsScheduler_AppointmentAdded" 10. AppointmentCreating="xJobsScheduler_AppointmentCreating" 11. AppointmentEdited="xJobsScheduler_AppointmentEdited" 12. AppointmentDeleted="xJobsScheduler_AppointmentDeleted"> 13.</telerikScheduler:RadScheduler> Easy, right? Otherwise, all the same styling in UserControl.Resources was re-used, right down to the DataContextProxy that lets us bind to a collection from our viewmodel (in this case, our code-behind) to use within the DataTemplate. The code conversion gets even easier, as I could literally copy and paste almost everything from the ViewModel to my Code-Behind, just a matter of pasting the right section into the right event. Here's the code-behind as proof: 001.public partial class SchedulingView : UserControl, INotifyPropertyChanged 002.{ 003. public RecruitingContext context; 004. 005. private QueryableCollectionView _jobsList; 006. public QueryableCollectionView JobsList 007. { 008. get { return this._jobsList; } 009. set 010. { 011. if (this._jobsList != value) 012. { 013. this._jobsList = value; 014. this.NotifyChanged("JobsList"); 015. } 016. } 017. } 018. 019. private QueryableCollectionView _applicantList; 020. public QueryableCollectionView ApplicantList 021. { 022. get { return _applicantList; } 023. set 024. { 025. if (_applicantList != value) 026. { 027. _applicantList = value; 028. NotifyChanged("ApplicantList"); 029. } 030. } 031. } 032. 033. private ObservableItemCollection<InterviewAppointment> _interviews = new ObservableItemCollection<InterviewAppointment>(); 034. public ObservableItemCollection<InterviewAppointment> Interviews 035. { 036. get { return _interviews; } 037. set 038. { 039. if (_interviews != value) 040. { 041. _interviews = value; 042. NotifyChanged("Interviews"); 043. } 044. } 045. } 046. 047. public SchedulingView() 048. { 049. InitializeComponent(); 050. 051. this.DataContext = this; 052. 053. this.Loaded += new RoutedEventHandler(SchedulingView_Loaded); 054. } 055. 056. void SchedulingView_Loaded(object sender, RoutedEventArgs e) 057. { 058. this.xJobsScheduler.AppointmentsSource = Interviews; 059. 060. context = new RecruitingContext(); 061. 062. LoadOperation loadop = context.Load(context.GetInterviewsQuery()); 063. loadop.Completed += new EventHandler(loadop_Completed); 064. 065. this._applicantList = new QueryableCollectionView(context.Applicants); 066. context.Load(context.GetApplicantsQuery()); 067. 068. this._jobsList = new QueryableCollectionView(context.JobPostings); 069. context.Load(context.GetJobPostingsQuery()); 070. } 071. 072. void loadop_Completed(object sender, EventArgs e) 073. { 074. LoadOperation loadop = sender as LoadOperation; 075. 076. _interviews.Clear(); 077. 078. foreach (var ent in loadop.Entities) 079. { 080. _interviews.Add(EntityToAppointment(ent as Interview)); 081. } 082. } 083. 084. private void xJobsScheduler_AppointmentAdded(object sender, Telerik.Windows.Controls.AppointmentAddedEventArgs e) 085. { 086. // now we have a new InterviewAppointment to add to our QCV :) 087. InterviewAppointment newInterview = e.Appointment as InterviewAppointment; 088. 089. this.context.Interviews.Add(AppointmentToEntity(newInterview)); 090. this.context.SubmitChanges((s) => 091. { 092. ActionHistory myAction = new ActionHistory(); 093. myAction.InterviewID = newInterview.InterviewID; 094. myAction.PostingID = newInterview.PostingID; 095. myAction.ApplicantID = newInterview.ApplicantID; 096. myAction.Description = String.Format("Interview with {0} has been created by {1}", newInterview.ApplicantID.ToString(), "default user"); 097. myAction.TimeStamp = DateTime.Now; 098. context.ActionHistories.Add(myAction); 099. context.SubmitChanges(); 100. } 101. , null); 102. } 103. 104. private void xJobsScheduler_AppointmentCreating(object sender, Telerik.Windows.Controls.AppointmentCreatingEventArgs e) 105. { 106. e.NewAppointment = new InterviewAppointment(); 107. } 108. 109. private void xJobsScheduler_AppointmentEdited(object sender, Telerik.Windows.Controls.AppointmentEditedEventArgs e) 110. { 111. Interview editedInterview = (from x in context.Interviews 112. where x.InterviewID == (e.Appointment as InterviewAppointment).InterviewID 113. select x).SingleOrDefault(); 114. 115. CopyAppointmentEdit(editedInterview, e.Appointment as InterviewAppointment); 116. 117. context.SubmitChanges((s) => 118. { 119. ActionHistory myAction = new ActionHistory(); 120. myAction.InterviewID = editedInterview.InterviewID; 121. myAction.PostingID = editedInterview.PostingID; 122. myAction.ApplicantID = editedInterview.ApplicantID; 123. myAction.Description = String.Format("Interview with {0} has been modified by {1}", editedInterview.ApplicantID.ToString(), "default user"); 124. myAction.TimeStamp = DateTime.Now; 125. context.ActionHistories.Add(myAction); 126. context.SubmitChanges(); 127. } 128. , null); 129. } 130. 131. private void xJobsScheduler_AppointmentDeleted(object sender, Telerik.Windows.Controls.AppointmentDeletedEventArgs e) 132. { 133. Interview deletedInterview = (from x in context.Interviews 134. where x.InterviewID == (e.Appointment as InterviewAppointment).InterviewID 135. select x).SingleOrDefault(); 136. 137. context.Interviews.Remove(deletedInterview); 138. context.SubmitChanges((s) => 139. { 140. ActionHistory myAction = new ActionHistory(); 141. myAction.InterviewID = deletedInterview.InterviewID; 142. myAction.PostingID = deletedInterview.PostingID; 143. myAction.ApplicantID = deletedInterview.ApplicantID; 144. myAction.Description = String.Format("Interview with {0} has been deleted by {1}", deletedInterview.ApplicantID.ToString(), "default user"); 145. myAction.TimeStamp = DateTime.Now; 146. context.ActionHistories.Add(myAction); 147. context.SubmitChanges(); 148. } 149. , null); 150. } 151. 152. #region Appointment Helpers :) 153. 154. public Interview AppointmentToEntity(InterviewAppointment ia) 155. { 156. Interview newInterview = new Interview(); 157. newInterview.Subject = ia.Subject; 158. newInterview.Body = ia.Body; 159. newInterview.Start = ia.Start; 160. newInterview.End = ia.End; 161. newInterview.ApplicantID = ia.ApplicantID; 162. newInterview.PostingID = ia.PostingID; 163. newInterview.InterviewID = ia.InterviewID; 164. 165. return newInterview; 166. } 167. 168. public InterviewAppointment EntityToAppointment(Interview ia) 169. { 170. InterviewAppointment newInterview = new InterviewAppointment(); 171. newInterview.Subject = ia.Subject; 172. newInterview.Body = ia.Body; 173. newInterview.Start = ia.Start; 174. newInterview.End = ia.End; 175. newInterview.ApplicantID = ia.ApplicantID; 176. newInterview.PostingID = ia.PostingID; 177. newInterview.InterviewID = ia.InterviewID; 178. 179. return newInterview; 180. } 181. 182. public void CopyAppointmentEdit(Interview entityInterview, InterviewAppointment appointmentInterview) 183. { 184. entityInterview.Subject = appointmentInterview.Subject; 185. entityInterview.Body = appointmentInterview.Body; 186. entityInterview.Start = appointmentInterview.Start; 187. entityInterview.End = appointmentInterview.End; 188. entityInterview.ApplicantID = appointmentInterview.ApplicantID; 189. entityInterview.PostingID = appointmentInterview.PostingID; 190. } 191. 192. #endregion 193. 194. #region INotifyPropertyChanged Members 195. 196. public event PropertyChangedEventHandler PropertyChanged; 197. 198. public void NotifyChanged(string propertyName) 199. { 200. if (string.IsNullOrEmpty(propertyName)) 201. throw new ArgumentException("propertyName"); 202. 203. PropertyChanged(this, new PropertyChangedEventArgs(propertyName)); 204. } 205. 206. #endregion 207.} Nice... right? :) One really important thing to note as well. See on line 51 where I set the DataContext before the Loaded event? This is super important, as if you don't have this set before the usercontrol is loaded, the DataContextProxy has no context to use and your EditAppointmentDialog Job/Applicant dropdowns will be blank and empty. Trust me on this, took a little bit of debugging to figure out that by setting the DataContext post-loaded would only lead to disaster and frustration. Otherwise, the only other real difference is that instead of sending an ActionHistory item through an event to get added to the database and saved, I do those right in the callback from submitting. The Result Again, I only have to post one picture because these bad boys used nearly identical code for both the MVVM and the code-behind views, so our end result is... So what have we learned here today? One, for the most part this MVVM thing is somewhat easy. Yeah, you sometimes have to write a bunch of extra code, but with the help of a few useful snippits you can turn the process into a pretty streamlined little workflow. Heck, this story gets even easier as you can see in this blog post by Michael Washington- specifically run a find on 'InvokeCommandAction' and you'll see the section regarding the command on TreeView in Blend 4. Brilliant! MVVM never looked so sweet! Otherwise, it is business as usual with RadScheduler for Silverlight whichever path you're choosing for your development. Between now and the next post, I'll be cleaning up styles a bit (those RadComboBoxes are a little too close to my labels!) and adding some to the RowDetailsViews for Applicants and Jobs, so you can see all the info for an appointment in the dropdown tab view. Otherwise, we're about ready to call a wrap on this oneDid you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

Flex actionscript extending DateChooser, events in calendar

- by Nemi

ExtendedDateChooser class is great solution for simple event calendar used in my flex project. You can find it if google for "Adding-Calendar-Event-Entries-to-the-Flex-DateChooser-Component" with a link of updated solution in comments of the post. I posted files below. Problem in that calendar is text events are missing when month is changed. Is there updateCompleted event in Actionscript just like in dateChooser flex component? Like in: <mx:DateChooser id="dc" updateCompleted="goThroughDateChooserCalendarLayoutAndSetEventsInCalendarAgain()"</mx> When scroll event is added, which is available in Actionscript, it gets dispatched but after updateDisplayList() is fired, so didn't manage to answer, why are calendar events erased? Any suggestions, what to add in code, maybe override some function? ExtendedDateChooserClass.mxml <?xml version='1.0' encoding="utf-8"?> <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" xmlns:mycomp="cyberslingers.controls.*" layout="absolute" creationComplete="init()"> <mx:Script> <![CDATA[ import cyberslingers.controls.ExtendedDateChooser; import mx.rpc.events.ResultEvent; import mx.rpc.events.FaultEvent; import mx.controls.Alert; public var mycal:ExtendedDateChooser = new ExtendedDateChooser(); // collection to hold date, data and label [Bindable] public var dateCollection:XMLList = new XMLList(); private function init():void { eventList.send(); } private function readCollection(event:ResultEvent):void { dateCollection = event.result.calendarevent; //Position and size the calendar mycal.width = 400; mycal.height = 400; //Add the data from the XML file to the calendar mycal.dateCollection = dateCollection; //Add the calendar to the canvas this.addChild(mycal); } private function readFaultHandler(event:FaultEvent):void { Alert.show(event.fault.message, "Could not load data"); } ]]> </mx:Script> <mx:HTTPService id="eventList" url="data.xml" resultFormat="e4x" result="readCollection(event);" fault="readFaultHandler(event);"/> </mx:Application> ExtendedDateChooser.as package cyberslingers.controls { import flash.events.Event; import flash.events.TextEvent; import mx.collections.ArrayCollection; import mx.controls.Alert; import mx.controls.CalendarLayout; import mx.controls.DateChooser; import mx.core.UITextField; import mx.events.FlexEvent; public class ExtendedDateChooser extends DateChooser { public function ExtendedDateChooser() { super(); this.addEventListener(TextEvent.LINK, linkHandler); this.addEventListener(FlexEvent.CREATION_COMPLETE, addEvents); } //datasource public var dateCollection:XMLList = new XMLList(); //-------------------------------------- // Add events //-------------------------------------- /** * Loop through calendar control and add event links * @param e */ private function addEvents(e:Event):void { // loop through all the calendar children for(var i:uint = 0; i < this.numChildren; i++) { var calendarObj:Object = this.getChildAt(i); // find the CalendarLayout object if(calendarObj.hasOwnProperty("className")) { if(calendarObj.className == "CalendarLayout") { var cal:CalendarLayout = CalendarLayout(calendarObj); // loop through all the CalendarLayout children for(var j:uint = 0; j < cal.numChildren; j++) { var dateLabel:Object = cal.getChildAt(j); // find all UITextFields if(dateLabel.hasOwnProperty("text")) { var day:UITextField = UITextField(dateLabel); var dayHTML:String = day.text; day.selectable = true; day.wordWrap = true; day.multiline = true; day.styleName = "EventLabel"; //TODO: passing date as string is not ideal, tough to validate //Make sure to add one to month since it is zero based var eventArray:Array = dateHelper((this.displayedMonth+1) + "/" + dateLabel.text + "/" + this.displayedYear); if(eventArray.length > 0) { for(var k:uint = 0; k < eventArray.length; k++) { dayHTML += "<br><A HREF='event:" + eventArray[k].data + "' TARGET=''>" + eventArray[k].label + "</A>"; } day.htmlText = dayHTML; } } } } } } } //-------------------------------------- // Events //-------------------------------------- /** * Handle clicking text link * @param e */ private function linkHandler(event:TextEvent):void { // What do we want to do when user clicks an entry? Alert.show("selected: " + event.text); } //-------------------------------------- // Helpers //-------------------------------------- /** * Build array of events for current date * @param string - current date * */ private function dateHelper(renderedDate:String):Array { var result:Array = new Array(); for(var i:uint = 0; i < dateCollection.length(); i++) { if(dateCollection[i].date == renderedDate) { result.push(dateCollection[i]); } } return result; } } } data.xml <?xml version="1.0" encoding="utf-8"?> <rss> <calendarevent> <date>8/22/2009</date> <data>This is a test 1</data> <label>Stephens Test 1</label> </calendarevent> <calendarevent> <date>8/23/2009</date> <data>This is a test 2</data> <label>Stephens Test 2</label> </calendarevent> </rss>

Read the article

Event Handlers Not Getting Called? - wxWidgets

- by Alex

Hello all, I'm working on a program for my C++ programming class, using wxWidgets. I'm having a huge problem in that my event handlers (I assume) are not getting called, because when I click on the button to trigger the event, nothing happens. My question is: Can you help me find the problem and explain why they would not be getting called? The event handlers OnAbout and OnQuit are working, just not OnCompute or OnClear. I'm really frustrated as I can't figure this out. Thanks a bunch in advance! #include "wx/wx.h" #include "time.h" #include <string> using std::string; // create object of Time class Time first; class App: public wxApp { virtual bool OnInit(); }; class MainPanel : public wxPanel { public: // Constructor for panel class // Constructs my panel class // Params - wxWindow pointer // no return type // pre-conditions: none // post-conditions: none MainPanel(wxWindow* parent); // OnCompute is the event handler for the Compute button // params - none // preconditions - none // postconditions - tasks will have been carried otu successfully // returns void void OnCompute(wxCommandEvent& WXUNUSED(event)); // OnClear is the event handler for the Clear button // params - none // preconditions - none // postconditions - all text areas will be cleared of data // returns void void OnClear(wxCommandEvent& WXUNUSED(event)); // Destructor for panel class // params none // preconditions - none // postconditions - none // no return type ~MainPanel( ); private: wxStaticText *startLabel; wxStaticText *endLabel; wxStaticText *pCLabel; wxStaticText *newEndLabel; wxTextCtrl *start; wxTextCtrl *end; wxTextCtrl *pC; wxTextCtrl *newEnd; wxButton *compute; wxButton *clear; DECLARE_EVENT_TABLE() }; class MainFrame: public wxFrame { private: wxPanel *mainPanel; public: MainFrame(const wxString& title, const wxPoint& pos, const wxSize& size); void OnQuit(wxCommandEvent& event); void OnAbout(wxCommandEvent& event); ~MainFrame(); DECLARE_EVENT_TABLE() }; enum { ID_Quit = 1, ID_About, BUTTON_COMPUTE = 100, BUTTON_CLEAR = 200 }; IMPLEMENT_APP(App) BEGIN_EVENT_TABLE(MainFrame, wxFrame) EVT_MENU(ID_Quit, MainFrame::OnQuit) EVT_MENU(ID_About, MainFrame::OnAbout) END_EVENT_TABLE() BEGIN_EVENT_TABLE(MainPanel, wxPanel) EVT_MENU(BUTTON_COMPUTE, MainPanel::OnCompute) EVT_MENU(BUTTON_CLEAR, MainPanel::OnClear) END_EVENT_TABLE() bool App::OnInit() { MainFrame *frame = new MainFrame( _("Good Guys Delivery Time Calculator"), wxPoint(50, 50), wxSize(450,340) ); frame->Show(true); SetTopWindow(frame); return true; } MainPanel::MainPanel(wxWindow* parent) : wxPanel(parent) { startLabel = new wxStaticText(this, -1, "Start Time:", wxPoint(75, 35)); start = new wxTextCtrl(this, -1, "", wxPoint(135, 35), wxSize(40, 21)); endLabel = new wxStaticText(this, -1, "End Time:", wxPoint(200, 35)); end = new wxTextCtrl(this, -1, "", wxPoint(260, 35), wxSize(40, 21)); pCLabel = new wxStaticText(this, -1, "Percent Change:", wxPoint(170, 85)); pC = new wxTextCtrl(this, -1, "", wxPoint(260, 85), wxSize(40, 21)); newEndLabel = new wxStaticText(this, -1, "New End Time:", wxPoint(180, 130)); newEnd = new wxTextCtrl(this, -1, "", wxPoint(260, 130), wxSize(40, 21)); compute = new wxButton(this, BUTTON_COMPUTE, "Compute", wxPoint(135, 185), wxSize(75, 35)); clear = new wxButton(this, BUTTON_CLEAR, "Clear", wxPoint(230, 185), wxSize(75, 35)); } MainPanel::~MainPanel() {} MainFrame::MainFrame(const wxString& title, const wxPoint& pos, const wxSize& size) : wxFrame( NULL, -1, title, pos, size ) { mainPanel = new MainPanel(this); wxMenu *menuFile = new wxMenu; menuFile->Append( ID_About, _("&About...") ); menuFile->AppendSeparator(); menuFile->Append( ID_Quit, _("E&xit") ); wxMenuBar *menuBar = new wxMenuBar; menuBar->Append( menuFile, _("&File") ); SetMenuBar( menuBar ); CreateStatusBar(); SetStatusText( _("Hi") ); } MainFrame::~MainFrame() {} void MainFrame::OnQuit(wxCommandEvent& WXUNUSED(event)) { Close(TRUE); } void MainFrame::OnAbout(wxCommandEvent& WXUNUSED(event)) { wxMessageBox( _("Alex Olson\nProject 11"), _("About"), wxOK | wxICON_INFORMATION, this); } void MainPanel::OnCompute(wxCommandEvent& WXUNUSED(event)) { int startT; int endT; int newEndT; double tD; wxString startTString = start->GetValue(); wxString endTString = end->GetValue(); startT = wxAtoi(startTString); endT = wxAtoi(endTString); pC->GetValue().ToDouble(&tD); first.SetStartTime(startT); first.SetEndTime(endT); first.SetTimeDiff(tD); try { first.ValidateData(); newEndT = first.ComputeEndTime(); *newEnd << newEndT; } catch (BaseException& e) { wxMessageBox(_(e.GetMessage()), _("Something Went Wrong!"), wxOK | wxICON_INFORMATION, this); } } void MainPanel::OnClear(wxCommandEvent& WXUNUSED(event)) { start->Clear(); end->Clear(); pC->Clear(); newEnd->Clear(); }

Read the article

C#/.NET Little Wonders: The Joy of Anonymous Types

- by James Michael Hare

Once again, in this series of posts I look at the parts of the .NET Framework that may seem trivial, but can help improve your code by making it easier to write and maintain. The index of all my past little wonders posts can be found here. In the .NET 3 Framework, Microsoft introduced the concept of anonymous types, which provide a way to create a quick, compiler-generated types at the point of instantiation. These may seem trivial, but are very handy for concisely creating lightweight, strongly-typed objects containing only read-only properties that can be used within a given scope. Creating an Anonymous Type In short, an anonymous type is a reference type that derives directly from object and is defined by its set of properties base on their names, number, types, and order given at initialization. In addition to just holding these properties, it is also given appropriate overridden implementations for Equals() and GetHashCode() that take into account all of the properties to correctly perform property comparisons and hashing. Also overridden is an implementation of ToString() which makes it easy to display the contents of an anonymous type instance in a fairly concise manner. To construct an anonymous type instance, you use basically the same initialization syntax as with a regular type. So, for example, if we wanted to create an anonymous type to represent a particular point, we could do this: 1: var point = new { X = 13, Y = 7 }; Note the similarity between anonymous type initialization and regular initialization. The main difference is that the compiler generates the type name and the properties (as readonly) based on the names and order provided, and inferring their types from the expressions they are assigned to. It is key to remember that all of those factors (number, names, types, order of properties) determine the anonymous type. This is important, because while these two instances share the same anonymous type: 1: // same names, types, and order 2: var point1 = new { X = 13, Y = 7 }; 3: var point2 = new { X = 5, Y = 0 }; These similar ones do not: 1: var point3 = new { Y = 3, X = 5 }; // different order 2: var point4 = new { X = 3, Y = 5.0 }; // different type for Y 3: var point5 = new {MyX = 3, MyY = 5 }; // different names 4: var point6 = new { X = 1, Y = 2, Z = 3 }; // different count Limitations on Property Initialization Expressions The expression for a property in an anonymous type initialization cannot be null (though it can evaluate to null) or an anonymous function. For example, the following are illegal: 1: // Null can't be used directly. Null reference of what type? 2: var cantUseNull = new { Value = null }; 3: 4: // Anonymous methods cannot be used. 5: var cantUseAnonymousFxn = new { Value = () => Console.WriteLine(“Can’t.”) }; Note that the restriction on null is just that you can’t use it directly as the expression, because otherwise how would it be able to determine the type? You can, however, use it indirectly assigning a null expression such as a typed variable with the value null, or by casting null to a specific type: 1: string str = null; 2: var fineIndirectly = new { Value = str }; 3: var fineCast = new { Value = (string)null }; All of the examples above name the properties explicitly, but you can also implicitly name properties if they are being set from a property, field, or variable. In these cases, when a field, property, or variable is used alone, and you don’t specify a property name assigned to it, the new property will have the same name. For example: 1: int variable = 42; 2: 3: // creates two properties named varriable and Now 4: var implicitProperties = new { variable, DateTime.Now }; Is the same type as: 1: var explicitProperties = new { variable = variable, Now = DateTime.Now }; But this only works if you are using an existing field, variable, or property directly as the expression. If you use a more complex expression then the name cannot be inferred: 1: // can't infer the name variable from variable * 2, must name explicitly 2: var wontWork = new { variable * 2, DateTime.Now }; In the example above, since we typed variable * 2, it is no longer just a variable and thus we would have to assign the property a name explicitly. ToString() on Anonymous Types One of the more trivial overrides that an anonymous type provides you is a ToString() method that prints the value of the anonymous type instance in much the same format as it was initialized (except actual values instead of expressions as appropriate of course). For example, if you had: 1: var point = new { X = 13, Y = 42 }; And then print it out: 1: Console.WriteLine(point.ToString()); You will get: 1: { X = 13, Y = 42 } While this isn’t necessarily the most stunning feature of anonymous types, it can be handy for debugging or logging values in a fairly easy to read format. Comparing Anonymous Type Instances Because anonymous types automatically create appropriate overrides of Equals() and GetHashCode() based on the underlying properties, we can reliably compare two instances or get hash codes. For example, if we had the following 3 points: 1: var point1 = new { X = 1, Y = 2 }; 2: var point2 = new { X = 1, Y = 2 }; 3: var point3 = new { Y = 2, X = 1 }; If we compare point1 and point2 we’ll see that Equals() returns true because they overridden version of Equals() sees that the types are the same (same number, names, types, and order of properties) and that the values are the same. In addition, because all equal objects should have the same hash code, we’ll see that the hash codes evaluate to the same as well: 1: // true, same type, same values 2: Console.WriteLine(point1.Equals(point2)); 3: 4: // true, equal anonymous type instances always have same hash code 5: Console.WriteLine(point1.GetHashCode() == point2.GetHashCode()); However, if we compare point2 and point3 we get false. Even though the names, types, and values of the properties are the same, the order is not, thus they are two different types and cannot be compared (and thus return false). And, since they are not equal objects (even though they have the same value) there is a good chance their hash codes are different as well (though not guaranteed): 1: // false, different types 2: Console.WriteLine(point2.Equals(point3)); 3: 4: // quite possibly false (was false on my machine) 5: Console.WriteLine(point2.GetHashCode() == point3.GetHashCode()); Using Anonymous Types Now that we’ve created instances of anonymous types, let’s actually use them. The property names (whether implicit or explicit) are used to access the individual properties of the anonymous type. The main thing, once again, to keep in mind is that the properties are readonly, so you cannot assign the properties a new value (note: this does not mean that instances referred to by a property are immutable – for more information check out C#/.NET Fundamentals: Returning Data Immutably in a Mutable World). Thus, if we have the following anonymous type instance: 1: var point = new { X = 13, Y = 42 }; We can get the properties as you’d expect: 1: Console.WriteLine(“The point is: ({0},{1})”, point.X, point.Y); But we cannot alter the property values: 1: // compiler error, properties are readonly 2: point.X = 99; Further, since the anonymous type name is only known by the compiler, there is no easy way to pass anonymous type instances outside of a given scope. The only real choices are to pass them as object or dynamic. But really that is not the intention of using anonymous types. If you find yourself needing to pass an anonymous type outside of a given scope, you should really consider making a POCO (Plain Old CLR Type – i.e. a class that contains just properties to hold data with little/no business logic) instead. Given that, why use them at all? Couldn’t you always just create a POCO to represent every anonymous type you needed? Sure you could, but then you might litter your solution with many small POCO classes that have very localized uses. It turns out this is the key to when to use anonymous types to your advantage: when you just need a lightweight type in a local context to store intermediate results, consider an anonymous type – but when that result is more long-lived and used outside of the current scope, consider a POCO instead. So what do we mean by intermediate results in a local context? Well, a classic example would be filtering down results from a LINQ expression. For example, let’s say we had a List<Transaction>, where Transaction is defined something like: 1: public class Transaction 2: { 3: public string UserId { get; set; } 4: public DateTime At { get; set; } 5: public decimal Amount { get; set; } 6: // … 7: } And let’s say we had this data in our List<Transaction>: 1: var transactions = new List<Transaction> 2: { 3: new Transaction { UserId = "Jim", At = DateTime.Now, Amount = 2200.00m }, 4: new Transaction { UserId = "Jim", At = DateTime.Now, Amount = -1100.00m }, 5: new Transaction { UserId = "Jim", At = DateTime.Now.AddDays(-1), Amount = 900.00m }, 6: new Transaction { UserId = "John", At = DateTime.Now.AddDays(-2), Amount = 300.00m }, 7: new Transaction { UserId = "John", At = DateTime.Now, Amount = -10.00m }, 8: new Transaction { UserId = "Jane", At = DateTime.Now, Amount = 200.00m }, 9: new Transaction { UserId = "Jane", At = DateTime.Now, Amount = -50.00m }, 10: new Transaction { UserId = "Jaime", At = DateTime.Now.AddDays(-3), Amount = -100.00m }, 11: new Transaction { UserId = "Jaime", At = DateTime.Now.AddDays(-3), Amount = 300.00m }, 12: }; So let’s say we wanted to get the transactions for each day for each user. That is, for each day we’d want to see the transactions each user performed. We could do this very simply with a nice LINQ expression, without the need of creating any POCOs: 1: // group the transactions based on an anonymous type with properties UserId and Date: 2: byUserAndDay = transactions 3: .GroupBy(tx => new { tx.UserId, tx.At.Date }) 4: .OrderBy(grp => grp.Key.Date) 5: .ThenBy(grp => grp.Key.UserId); Now, those of you who have attempted to use custom classes as a grouping type before (such as GroupBy(), Distinct(), etc.) may have discovered the hard way that LINQ gets a lot of its speed by utilizing not on Equals(), but also GetHashCode() on the type you are grouping by. Thus, when you use custom types for these purposes, you generally end up having to write custom Equals() and GetHashCode() implementations or you won’t get the results you were expecting (the default implementations of Equals() and GetHashCode() are reference equality and reference identity based respectively). As we said before, it turns out that anonymous types already do these critical overrides for you. This makes them even more convenient to use! Instead of creating a small POCO to handle this grouping, and then having to implement a custom Equals() and GetHashCode() every time, we can just take advantage of the fact that anonymous types automatically override these methods with appropriate implementations that take into account the values of all of the properties. Now, we can look at our results: 1: foreach (var group in byUserAndDay) 2: { 3: // the group’s Key is an instance of our anonymous type 4: Console.WriteLine("{0} on {1:MM/dd/yyyy} did:", group.Key.UserId, group.Key.Date); 5: 6: // each grouping contains a sequence of the items. 7: foreach (var tx in group) 8: { 9: Console.WriteLine("\t{0}", tx.Amount); 10: } 11: } And see: 1: Jaime on 06/18/2012 did: 2: -100.00 3: 300.00 4: 5: John on 06/19/2012 did: 6: 300.00 7: 8: Jim on 06/20/2012 did: 9: 900.00 10: 11: Jane on 06/21/2012 did: 12: 200.00 13: -50.00 14: 15: Jim on 06/21/2012 did: 16: 2200.00 17: -1100.00 18: 19: John on 06/21/2012 did: 20: -10.00 Again, sure we could have just built a POCO to do this, given it an appropriate Equals() and GetHashCode() method, but that would have bloated our code with so many extra lines and been more difficult to maintain if the properties change. Summary Anonymous types are one of those Little Wonders of the .NET language that are perfect at exactly that time when you need a temporary type to hold a set of properties together for an intermediate result. While they are not very useful beyond the scope in which they are defined, they are excellent in LINQ expressions as a way to create and us intermediary values for further expressions and analysis. Anonymous types are defined by the compiler based on the number, type, names, and order of properties created, and they automatically implement appropriate Equals() and GetHashCode() overrides (as well as ToString()) which makes them ideal for LINQ expressions where you need to create a set of properties to group, evaluate, etc. Technorati Tags: C#,CSharp,.NET,Little Wonders,Anonymous Types,LINQ

Read the article

The Windows Store... why did I sign up with this mess again?

- by FransBouma

Yesterday, Microsoft revealed that the Windows Store is now open to all developers in a wide range of countries and locations. For the people who think "wtf is the 'Windows Store'?", it's the central place where Windows 8 users will be able to find, download and purchase applications (or as we now have to say to not look like a computer illiterate: <accent style="Kentucky">aaaaappss</accent>) for Windows 8. As this is the store which is integrated into Windows 8, it's an interesting place for ISVs, as potential customers might very well look there first. This of course isn't true for all kinds of software, and developer tools in general aren't the kind of applications most users will download from the Windows store, but a presence there can't hurt. Now, this Windows Store hosts two kinds of applications: 'Metro-style' applications and 'Desktop' applications. The 'Metro-style' applications are applications created for the new 'Metro' UI which is present on Windows 8 desktop and Windows RT (the single color/big font fingerpaint-oriented UI). 'Desktop' applications are the applications we all run and use on Windows today. Our software are desktop applications. The Windows Store hosts all Metro-style applications locally in the store and handles the payment for these applications. This means you upload your application (sorry, 'app') to the store, jump through a lot of hoops, Microsoft verifies that your application is not violating a tremendous long list of rules and after everything is OK, it's published and hopefully you get customers and thus earn money. Money which Microsoft will pay you on a regular basis after customers buy your application. Desktop applications are not following this path however. Desktop applications aren't hosted by the Windows Store. Instead, the Windows Store more or less hosts a page with the application's information and where to get the goods. I.o.w.: it's nothing more than a product's Facebook page. Microsoft will simply redirect a visitor of the Windows Store to your website and the visitor will then use your site's system to purchase and download the application. This last bit of information is very important. So, this morning I started with fresh energy to register our company 'Solutions Design bv' at the Windows Store and our two applications, LLBLGen Pro and ORM Profiler. First I went to the Windows Store dashboard page. If you don't have an account, you have to log in or sign up if you don't have a live account. I signed in with my live account. After that, it greeted me with a page where I had to fill in a code which was mailed to me. My local mail server polls every several minutes for email so I had to kick it to get it immediately. I grabbed the code from the email and I was presented with a multi-step process to register myself as a company or as an individual. In red I was warned that this choice was permanent and not changeable. I chuckled: Microsoft apparently stores its data on paper, not in digital form. I chose 'company' and was presented with a lengthy form to fill out. On the form there were two strange remarks: Per company there can just be 1 (one, uno, not zero, not two or more) registered developer, and only that developer is able to upload stuff to the store. I have no idea how this works with large companies, oh the overhead nightmares... "Sorry, but John, our registered developer with the Windows Store is on holiday for 3 months, backpacking through Australia, no, he's not reachable at this point. M'yeah, sorry bud. Hey, did you fill in those TPS reports yesterday?" A separate Approver has to be specified, which has to be a different person than the registered developer. Apparently to Microsoft a company with just 1 person is not a company. Luckily we're with two people! *pfew*, dodged that one, otherwise I would be stuck forever: the choice I already made was not reversible! After I had filled out the form and it was all well and good and accepted by the Microsoft lackey who had to write it all down in some paper notebook ("Hey, be warned! It's a permanent choice! Written down in ink, can't be changed!"), I was presented with the question how I wanted to pay for all this. "Pay for what?" I wondered. Must be the paper they were scribbling the information on, I concluded. After all, there's a financial crisis going on! How could I forget! Silly me. "Ok fair enough". The price was 75 Euros, not the end of the world. I could only pay by credit card, so it was accepted quickly. Or so I thought. You see, Microsoft has a different idea about CC payments. In the normal world, you type in your CC number, some date, a name and a security code and that's it. But Microsoft wants to verify this even more. They want to make a verification purchase of a very small amount and are doing that with a special code in the description. You then have to type in that code in a special form in the Windows Store dashboard and after that you're verified. Of course they'll refund the small amount they pull from your card. Sounds simple, right? Well... no. The problem starts with the fact that I can't see the CC activity on some website: I have a bank issued CC card. I get the CC activity once a month on a piece of paper sent to me. The bank's online website doesn't show them. So it's possible I have to wait for this code till October 12th. One month. "So what, I'm not going to use it anyway, Desktop applications don't use the payment system", I thought. "Haha, you're so naive, dear developer!" Microsoft won't allow you to publish any applications till this verification is done. So no application publishing for a month. Wouldn't it be nice if things were, you know, digital, so things got done instantly? But of course, that lackey who scribbled everything in the Big Windows Store Registration Book isn't that quick. Can't blame him though. He's just doing his job. Now, after the payment was done, I was presented with a page which tells me Microsoft is going to use a third party company called 'Symantec', which will verify my identity again. The page explains to me that this could be done through email or phone and that they'll contact the Approver to verify my identity. "Phone?", I thought... that's a little drastic for a developer account to publish a single page of information about an external hosted software product, isn't it? On Facebook I just added a page, done. And paying you, Microsoft, took less information: you were happy to take my money before my identity was even 'verified' by this 3rd party's minions! "Double standards!", I roared. No-one cared. But it's the thought of getting it off your chest, you know. Luckily for me, everyone at Symantec was asleep when I was registering so they went for the fallback option in case phone calls were not possible: my Approver received an email. Imagine you have to explain the idiot web of security theater I was caught in to someone else who then has to reply a random person over the internet that I indeed was who I said I was. As she's a true sweetheart, she gave me the benefit of the doubt and assured that for now, I was who I said I was. Remember, this is for a desktop application, which is only a link to a website, some pictures and a piece of text. No file hosting, no payment processing, nothing, just a single page. Yeah, I also thought I was crazy. But we're not at the end of this quest yet. I clicked around in the confusing menus of the Windows Store dashboard and found the 'Desktop' section. I get a helpful screen with a warning in red that it can't find any certified 'apps'. True, I'm just getting started, buddy. I see a link: "Check the Windows apps you submitted for certification". Well, I haven't submitted anything, but let's see where it brings me. Oh the thrill of adventure! I click the link and I end up on this site: the hardware/desktop dashboard account registration. "Erm... but I just registered...", I mumbled to no-one in particular. Apparently for desktop registration / verification I have to register again, it tells me. But not only that, the desktop application has to be signed with a certificate. And not just some random el-cheapo certificate you can get at any mall's discount store. No, this certificate is special. It's precious. This certificate, the 'Microsoft Authenticode' Digital Certificate, is the only certificate that's acceptable, and jolly, it can be purchased from VeriSign for the price of only ... $99.-, but be quick, because this is a limited time offer! After that it's, I kid you not, $499.-. 500 dollars for a certificate to sign an executable. But, I do feel special, I got a special price. Only for me! I'm glowing. Not for long though. Here I started to wonder, what the benefit of it all was. I now again had to pay money for a shiny certificate which will add 'Solutions Design bv' to our installer as the publisher instead of 'unknown', while our customers download the file from our website. Not only that, but this was all about a Desktop application, which wasn't hosted by Microsoft. They only link to it. And make no mistake. These prices aren't single payments. Every year these have to be renewed. Like a membership of an exclusive club: you're special and privileged, but only if you cough up the dough. To give you an example how silly this all is: I added LLBLGen Pro and ORM Profiler to the Visual Studio Gallery some time ago. It's the same thing: it's a central place where one can find software which adds to / extends / works with Visual Studio. I could simply create the pages, add the information and they show up inside Visual Studio. No files are hosted at Microsoft, they're downloaded from our website. Exactly the same system. As I have to wait for the CC transcripts to arrive anyway, I can't proceed with publishing in this new shiny store. After the verification is complete I have to wait for verification of my software by Microsoft. Even Desktop applications need to be verified using a long list of rules which are mainly focused on Metro-style applications. Even while they're not hosted by Microsoft. I wonder what they'll find. "Your application wasn't approved. It violates rule 14 X sub D: it provides more value than our own competing framework". While I was writing this post, I tried to check something in the Windows Store Dashboard, to see whether I remembered it correctly. I was presented again with the question, after logging in with my live account, to enter the code that was just mailed to me. Not the previous code, a brand new one. Again I had to kick my mail server to pull the email to proceed. This was it. This 'experience' is so beyond miserable, I'm afraid I have to say goodbye for now to the 'Windows Store'. It's simply not worth my time. Now, about live accounts. You might know this: live accounts are tied to everything you do with Microsoft. So if you have an MSDN subscription, e.g. the one which costs over $5000.-, it's tied to this same live account. But the fun thing is, you can login with your live account to the MSDN subscriptions with just the account id and password. No additional code is mailed to you. While it gives you access to all Microsoft software available, including your licenses. Why the draconian security theater with this Windows Store, while all I want is to publish some desktop applications while on other Microsoft sites it's OK to simply sign in with your live account: no codes needed, no verification and no certificates? Microsoft, one thing you need with this store and that's: apps. Apps, apps, apps, apps, aaaaaaaaapps. Sorry, my bad, got carried away. I just can't stand the word 'app'. This store's shelves have to be filled to the brim with goods. But instead of being welcomed into the store with open arms, I have to fight an uphill battle with an endless list of rules and bullshit to earn the privilege to publish in this shiny store. As if I have to be thrilled to be one of the exclusive club called 'Windows Store Publishers'. As if Microsoft doesn't want it to succeed. Craig Stuntz sent me a link to an old blog post of his regarding code signing and uploading to Microsoft's old mobile store from back in the WinMo5 days: http://blogs.teamb.com/craigstuntz/2006/10/11/28357/. Good read and good background info about how little things changed over the years. I hope this helps Microsoft make things more clearer and smoother and also helps ISVs with their decision whether to go with the Windows Store scheme or ignore it. For now, I don't see the advantage of publishing there, especially not with the nonsense rules Microsoft cooked up. Perhaps it changes in the future, who knows.

Read the article

WCF- Large Data

- by Pinu

I have a WCF Web Service with basicHTTPBinding , the server side the transfer mode is streamedRequest as the client will be sending us large file in the form of memory stream. But on client side when i use transfer mode as streamedRequest its giving me a this errro "The remote server returned an error: (400) Bad Request" And when i look in to trace information , i see this as the error message Exception: There is a problem with the XML that was received from the network. See inner exception for more details. InnerException: The body of the message cannot be read because it is empty. I am able to send up to 5MB of data using trasfermode as buffered , but it will effect the performance of my web service in the long run , if there are many clients who are trying to access the service in buffered transfer mode. SmartConnect.Service1Client Serv = new SmartConnectClient.SmartConnect.Service1Client(); SmartConnect.OrderCertMailResponse OrderCert = new SmartConnectClient.SmartConnect.OrderCertMailResponse(); OrderCert.UserID = "abcd"; OrderCert.Password = "7a80f6623"; OrderCert.SoftwareKey = "90af1"; string applicationDirectory = @"\\inid\utty\Bran"; byte[] CertMail = File.ReadAllBytes(applicationDirectory + @"\5mb_test.zip"); MemoryStream str = new MemoryStream(CertMail); //OrderCert.Color = true; //OrderCert.Duplex = false; //OrderCert.FirstClass = true; //OrderCert.File = str; //OrderCert.ReturnAddress1 = "Test123"; //OrderCert.ReturnAddress2 = "Test123"; //OrderCert.ReturnAddress3 = "Test123"; //OrderCert.ReturnAddress4 = "Test123"; OrderCert.File = str; //string OrderNumber = ""; //string Password = OrderCert.Password; //int ReturnCode = 0; //string ReturnMessage = ""; //string SoftwareKey = OrderCert.SoftwareKey; //string UserID = OrderCert.UserID; //OrderCert.File = str; MemoryStream FileStr = str; Serv.OrderCertMail(OrderCert); // Serv.OrderCertMail(ref OrderNumber, ref Password, ref ReturnCode, ref ReturnMessage, ref SoftwareKey, ref UserID, ref FileStr ); lblON.Text = OrderCert.OrderNumber; Serv.Close(); // My Web Service - Service Contract [OperationContract] OrderCertMailResponse OrderCertMail(OrderCertMailResponse OrderCertMail); [MessageContract] public class OrderCertMailResponse { string userID = ""; string password = ""; string softwareID = ""; MemoryStream file = null; //MemoryStream str = null; [MessageHeader] //[DataMember] public string UserID { get { return userID; } set { userID = value; } } [MessageHeader] //[DataMember] public string Password { get { return password; } set { password = value; } } [MessageHeader] //[DataMember] public string SoftwareKey { get { return softwareID; } set { softwareID = value; } } [MessageBodyMember] // [DataMember] public MemoryStream File { get { return file; } set { file = value; } } [MessageHeader] //[DataMember] public string ReturnMessage; [MessageHeader] //[DataMember] public int ReturnCode; [MessageHeader] public string OrderNumber; //// Control file fields //[MessageHeader] ////[DataMember] //public string ReturnAddress1; //[MessageHeader] ////[DataMember] //public string ReturnAddress2; //[MessageHeader] ////[DataMember] //public string ReturnAddress3; //[MessageHeader] ////[DataMember] //public string ReturnAddress4; //[MessageHeader] ////[DataMember] //public bool FirstClass; //[MessageHeader] ////[DataMember] //public bool Color; //[MessageHeader] ////[DataMember] //public bool Duplex; } [ServiceBehavior(IncludeExceptionDetailInFaults = true)] public class Service1 : IService1 { public OrderCertMailResponse OrderCertMail(OrderCertMailResponse OrderCertMail) { OrderService CertOrder = new OrderService(); ClientUserInfo Info = new ClientUserInfo(); ControlFileInfo Control = new ControlFileInfo(); //Info.Password = "f2496623"; // hard coded password for development testing purposes //Info.SoftwareKey = "6dbb71"; // hard coded software key this is a developement software key //Info.UserName = "sdfs"; // hard coded UserID - for testing Info.UserName = OrderCertMail.UserID.ToString(); Info.Password = OrderCertMail.Password.ToString(); Info.SoftwareKey = OrderCertMail.SoftwareKey.ToString(); //Control.ReturnAddress1 = OrderCertMail.ReturnAddress1; //Control.ReturnAddress2 = OrderCertMail.ReturnAddress2; //Control.ReturnAddress3 = OrderCertMail.ReturnAddress3; //Control.ReturnAddress4 = OrderCertMail.ReturnAddress4; //Control.CertMailFirstClass = OrderCertMail.FirstClass; //Control.CertMailColor = OrderCertMail.Color; //Control.CertMailDuplex = OrderCertMail.Duplex; //byte[] CertFile = new byte[0]; //byte[] CertFile = null; //string applicationDirectory = @"\\intrepid\utility\Bryan"; // byte[] CertMailFile = File.ReadAllBytes(applicationDirectory + @"\3mb_test.zip"); //MemoryStream str = new MemoryStream(CertMailFile); OrderCertMailResponseClass OrderCertResponse = CertOrder.OrderCertmail(Info,Control,OrderCertMail.File); OrderCertMail.ReturnMessage = OrderCertResponse.ReturnMessage.ToString(); OrderCertMail.ReturnCode = Convert.ToInt32(OrderCertResponse.ReturnCode.ToString()); OrderCertMail.OrderNumber = OrderCertResponse.OrderNumber; return OrderCertMail; }

Read the article

Should this immutable struct be a mutable class?

- by ChaosPandion

I showed this struct to a fellow programmer and they felt that it should be a mutable class. They felt it is inconvenient not to have null references and the ability to alter the object as required. I would really like to know if there are any other reasons to make this a mutable class. [Serializable] public struct PhoneNumber : ICloneable, IEquatable<PhoneNumber> { private const int AreaCodeShift = 54; private const int CentralOfficeCodeShift = 44; private const int SubscriberNumberShift = 30; private const int CentralOfficeCodeMask = 0x000003FF; private const int SubscriberNumberMask = 0x00003FFF; private const int ExtensionMask = 0x3FFFFFFF; private readonly ulong value; public int AreaCode { get { return UnmaskAreaCode(value); } } public int CentralOfficeCode { get { return UnmaskCentralOfficeCode(value); } } public int SubscriberNumber { get { return UnmaskSubscriberNumber(value); } } public int Extension { get { return UnmaskExtension(value); } } public PhoneNumber(ulong value) : this(UnmaskAreaCode(value), UnmaskCentralOfficeCode(value), UnmaskSubscriberNumber(value), UnmaskExtension(value), true) { } public PhoneNumber(int areaCode, int centralOfficeCode, int subscriberNumber) : this(areaCode, centralOfficeCode, subscriberNumber, 0, true) { } public PhoneNumber(int areaCode, int centralOfficeCode, int subscriberNumber, int extension) : this(areaCode, centralOfficeCode, subscriberNumber, extension, true) { } private PhoneNumber(int areaCode, int centralOfficeCode, int subscriberNumber, int extension, bool throwException) { value = 0; if (areaCode < 200 || areaCode > 989) { if (!throwException) return; throw new ArgumentOutOfRangeException("areaCode", areaCode, @"The area code portion must fall between 200 and 989."); } else if (centralOfficeCode < 200 || centralOfficeCode > 999) { if (!throwException) return; throw new ArgumentOutOfRangeException("centralOfficeCode", centralOfficeCode, @"The central office code portion must fall between 200 and 999."); } else if (subscriberNumber < 0 || subscriberNumber > 9999) { if (!throwException) return; throw new ArgumentOutOfRangeException("subscriberNumber", subscriberNumber, @"The subscriber number portion must fall between 0 and 9999."); } else if (extension < 0 || extension > 1073741824) { if (!throwException) return; throw new ArgumentOutOfRangeException("extension", extension, @"The extension portion must fall between 0 and 1073741824."); } else if (areaCode.ToString()[1] - 48 > 8) { if (!throwException) return; throw new ArgumentOutOfRangeException("areaCode", areaCode, @"The second digit of the area code cannot be greater than 8."); } else { value |= ((ulong)(uint)areaCode << AreaCodeShift); value |= ((ulong)(uint)centralOfficeCode << CentralOfficeCodeShift); value |= ((ulong)(uint)subscriberNumber << SubscriberNumberShift); value |= ((ulong)(uint)extension); } } public object Clone() { return this; } public override bool Equals(object obj) { return obj != null && obj.GetType() == typeof(PhoneNumber) && Equals((PhoneNumber)obj); } public bool Equals(PhoneNumber other) { return this.value == other.value; } public override int GetHashCode() { return value.GetHashCode(); } public override string ToString() { return ToString(PhoneNumberFormat.Separated); } public string ToString(PhoneNumberFormat format) { switch (format) { case PhoneNumberFormat.Plain: return string.Format(@"{0:D3}{1:D3}{2:D4} {3:#}", AreaCode, CentralOfficeCode, SubscriberNumber, Extension).Trim(); case PhoneNumberFormat.Separated: return string.Format(@"{0:D3}-{1:D3}-{2:D4} {3:#}", AreaCode, CentralOfficeCode, SubscriberNumber, Extension).Trim(); default: throw new ArgumentOutOfRangeException("format"); } } public ulong ToUInt64() { return value; } public static PhoneNumber Parse(string value) { var result = default(PhoneNumber); if (!TryParse(value, out result)) { throw new FormatException(string.Format(@"The string ""{0}"" could not be parsed as a phone number.", value)); } return result; } public static bool TryParse(string value, out PhoneNumber result) { result = default(PhoneNumber); if (string.IsNullOrEmpty(value)) { return false; } var index = 0; var numericPieces = new char[value.Length]; foreach (var c in value) { if (char.IsNumber(c)) { numericPieces[index++] = c; } } if (index < 9) { return false; } var numericString = new string(numericPieces); var areaCode = int.Parse(numericString.Substring(0, 3)); var centralOfficeCode = int.Parse(numericString.Substring(3, 3)); var subscriberNumber = int.Parse(numericString.Substring(6, 4)); var extension = 0; if (numericString.Length > 10) { extension = int.Parse(numericString.Substring(10)); } result = new PhoneNumber( areaCode, centralOfficeCode, subscriberNumber, extension, false ); return result.value == 0; } public static bool operator ==(PhoneNumber left, PhoneNumber right) { return left.Equals(right); } public static bool operator !=(PhoneNumber left, PhoneNumber right) { return !left.Equals(right); } private static int UnmaskAreaCode(ulong value) { return (int)(value >> AreaCodeShift); } private static int UnmaskCentralOfficeCode(ulong value) { return (int)((value >> CentralOfficeCodeShift) & CentralOfficeCodeMask); } private static int UnmaskSubscriberNumber(ulong value) { return (int)((value >> SubscriberNumberShift) & SubscriberNumberMask); } private static int UnmaskExtension(ulong value) { return (int)(value & ExtensionMask); } } public enum PhoneNumberFormat { Plain, Separated }

Read the article

Problem with room/screen/menu controller in python game: old rooms are not removed from memory

- by Jordan Magnuson

I'm literally banging my head against a wall here (as in, yes, physically, at my current location, I am damaging my cranium). Basically, I've got a Python/Pygame game with some typical game "rooms", or "screens." EG title screen, high scores screen, and the actual game room. Something bad is happening when I switch between rooms: the old room (and its various items) are not removed from memory, or from my event listener. Not only that, but every time I go back to a certain room, my number of event listeners increases, as well as the RAM being consumed! (So if I go back and forth between the title screen and the "game room", for instance, the number of event listeners and the memory usage just keep going up and up. The main issue is that all the event listeners start to add up and really drain the CPU. I'm new to Python, and don't know if I'm doing something obviously wrong here, or what. I will love you so much if you can help me with this! Below is the relevant source code. Complete source code at http://www.necessarygames.com/my_games/betraveled/betraveled_src0328.zip MAIN.PY class RoomController(object): """Controls which room is currently active (eg Title Screen)""" def __init__(self, screen, ev_manager): self.room = None self.screen = screen self.ev_manager = ev_manager self.ev_manager.register_listener(self) self.room = self.set_room(config.room) def set_room(self, room_const): #Unregister old room from ev_manager if self.room: self.room.ev_manager.unregister_listener(self.room) self.room = None #Set new room based on const if room_const == config.TITLE_SCREEN: return rooms.TitleScreen(self.screen, self.ev_manager) elif room_const == config.GAME_MODE_ROOM: return rooms.GameModeRoom(self.screen, self.ev_manager) elif room_const == config.GAME_ROOM: return rooms.GameRoom(self.screen, self.ev_manager) elif room_const == config.HIGH_SCORES_ROOM: return rooms.HighScoresRoom(self.screen, self.ev_manager) def notify(self, event): if isinstance(event, ChangeRoomRequest): if event.game_mode: config.game_mode = event.game_mode self.room = self.set_room(event.new_room) #Run game def main(): pygame.init() screen = pygame.display.set_mode(config.screen_size) ev_manager = EventManager() spinner = CPUSpinnerController(ev_manager) room_controller = RoomController(screen, ev_manager) pygame_event_controller = PyGameEventController(ev_manager) spinner.run() EVENT_MANAGER.PY class EventManager: #This object is responsible for coordinating most communication #between the Model, View, and Controller. def __init__(self): from weakref import WeakKeyDictionary self.last_listeners = {} self.listeners = WeakKeyDictionary() self.eventQueue= [] self.gui_app = None #---------------------------------------------------------------------- def register_listener(self, listener): self.listeners[listener] = 1 #---------------------------------------------------------------------- def unregister_listener(self, listener): if listener in self.listeners: del self.listeners[listener] #---------------------------------------------------------------------- def clear(self): del self.listeners[:] #---------------------------------------------------------------------- def post(self, event): # if isinstance(event, MouseButtonLeftEvent): # debug(event.name) #NOTE: copying the list like this before iterating over it, EVERY tick, is highly inefficient, #but currently has to be done because of how new listeners are added to the queue while it is running #(eg when popping cards from a deck). Should be changed. See: http://dr0id.homepage.bluewin.ch/pygame_tutorial08.html #and search for "Watch the iteration" print 'Number of listeners: ' + str(len(self.listeners)) for listener in list(self.listeners): #NOTE: If the weakref has died, it will be #automatically removed, so we don't have #to worry about it. listener.notify(event) def notify(self, event): pass #------------------------------------------------------------------------------ class PyGameEventController: """...""" def __init__(self, ev_manager): self.ev_manager = ev_manager self.ev_manager.register_listener(self) self.input_freeze = False #---------------------------------------------------------------------- def notify(self, incoming_event): if isinstance(incoming_event, UserInputFreeze): self.input_freeze = True elif isinstance(incoming_event, UserInputUnFreeze): self.input_freeze = False elif isinstance(incoming_event, TickEvent) or isinstance(incoming_event, BoardCreationTick): #Share some time with other processes, so we don't hog the cpu pygame.time.wait(5) #Handle Pygame Events for event in pygame.event.get(): #If this event manager has an associated PGU GUI app, notify it of the event if self.ev_manager.gui_app: self.ev_manager.gui_app.event(event) #Standard event handling for everything else ev = None if event.type == QUIT: ev = QuitEvent() elif event.type == pygame.MOUSEBUTTONDOWN and not self.input_freeze: if event.button == 1: #Button 1 pos = pygame.mouse.get_pos() ev = MouseButtonLeftEvent(pos) elif event.type == pygame.MOUSEBUTTONDOWN and not self.input_freeze: if event.button == 2: #Button 2 pos = pygame.mouse.get_pos() ev = MouseButtonRightEvent(pos) elif event.type == pygame.MOUSEBUTTONUP and not self.input_freeze: if event.button == 2: #Button 2 Release pos = pygame.mouse.get_pos() ev = MouseButtonRightReleaseEvent(pos) elif event.type == pygame.MOUSEMOTION: pos = pygame.mouse.get_pos() ev = MouseMoveEvent(pos) #Post event to event manager if ev: self.ev_manager.post(ev) # elif isinstance(event, BoardCreationTick): # #Share some time with other processes, so we don't hog the cpu # pygame.time.wait(5) # # #If this event manager has an associated PGU GUI app, notify it of the event # if self.ev_manager.gui_app: # self.ev_manager.gui_app.event(event) #------------------------------------------------------------------------------ class CPUSpinnerController: def __init__(self, ev_manager): self.ev_manager = ev_manager self.ev_manager.register_listener(self) self.clock = pygame.time.Clock() self.cumu_time = 0 self.keep_going = True #---------------------------------------------------------------------- def run(self): if not self.keep_going: raise Exception('dead spinner') while self.keep_going: time_passed = self.clock.tick() fps = self.clock.get_fps() self.cumu_time += time_passed self.ev_manager.post(TickEvent(time_passed, fps)) if self.cumu_time >= 1000: self.cumu_time = 0 self.ev_manager.post(SecondEvent(fps=fps)) pygame.quit() #---------------------------------------------------------------------- def notify(self, event): if isinstance(event, QuitEvent): #this will stop the while loop from running self.keep_going = False EXAMPLE CLASS USING EVENT MANAGER class Timer(object): def __init__(self, ev_manager, time_left): self.ev_manager = ev_manager self.ev_manager.register_listener(self) self.time_left = time_left self.paused = False def __repr__(self): return str(self.time_left) def pause(self): self.paused = True def unpause(self): self.paused = False def notify(self, event): #Pause Event if isinstance(event, Pause): self.pause() #Unpause Event elif isinstance(event, Unpause): self.unpause() #Second Event elif isinstance(event, SecondEvent): if not self.paused: self.time_left -= 1

Read the article

MVVM in Task-It

As I'm gearing up to write a post about dynamic XAP loading with MEF, I'd like to first talk a bit about MVVM, the Model-View-ViewModel pattern, as I will be leveraging this pattern in my future posts. Download Source Code Why MVVM? Your first question may be, "why do I need this pattern? I've been using a code-behind approach for years and it works fine." Well, you really don't have to make the switch to MVVM, but let me first explain some of the benefits I see for doing so. MVVM Benefits Testability - This is the one you'll probably hear the most about when it comes to MVVM. Moving most of the code from your code-behind to a separate view model class means you can now write unit tests against the view model without any knowledge of a view (UserControl). Multiple UIs - Let's just say that you've created a killer app, it's running in the browser, and maybe you've even made it run out-of-browser. Now what if your boss comes to you and says, "I heard about this new Windows Phone 7 device that is coming out later this year. Can you start porting the app to that device?". Well, now you have to create a new UI (UserControls, etc.) because you have a lot less screen real estate to work with. So what do you do, copy all of your existing UserControls, paste them, rename them, and then start changing the code? Hmm, that doesn't sound so good. But wait, if most of the code that makes your browser-based app tick lives in view model classes, now you can create new view (UserControls) for Windows Phone 7 that reference the same view model classes as your browser-based app. Page state - In Silverlight you're at some point going to be faced with the same issue you dealt with for years in ASP.NET, maintaining page state. Let's say a user hits your Products page, does some stuff (filters record, etc.), then leaves the page and comes back later. It would be best if the Products page was in the same state as when they left it right? Well, if you've thrown away your view (UserControl or Page) and moved off to another part of the UI, when you come back to Products you're probably going to re-instantiate your view...which will put it right back in the state it was when it started. Hmm, not good. Well, with a little help from MEF you can store the state in your view model class, MEF will keep that view model instance hanging around in memory, and then you simply rebind your view to the view model class. I made that sound easy, but it's actually a bit of work to properly store and restore the state. At least it can be done though, which will make your users a lot happier! I'll talk more about this in an upcoming blog post. No event handlers? Another nice thing about MVVM is that you can bind your UserControls to the view model, which may eliminate the need for event handlers in your code-behind. So instead of having a Click handler on a Button (or RadMenuItem), for example, you can now bind your control's Command property to a DelegateCommand in your view model (I'll talk more about Commands in an upcoming post). Instead of having a SelectionChanged event handler on your RadGridView you can now bind its SelectedItem property to a property in your view model, and each time the user clicks a row, the view model property's setter will be called. Now through the magic of binding we can eliminate the need for traditional code-behind based event handlers on our user interface controls, and the best thing is that the view model knows about everything that's going on...which means we can test things without a user interface. The brains of the operation So what we're seeing here is that the view is now just a dumb layer that binds to the view model, and that the view model is in control of just about everything, like what happens when a RadGridView row is selected, or when a RadComboBoxItem is selected, or when a RadMenuItem is clicked. It is also responsible for loading data when the page is hit, as well as kicking off data inserts, updates and deletions. Once again, all of this stuff can be tested without the need for a user interface. If the test works, then it'll work regardless of whether the user is hitting the browser-based version of your app, or the Windows Phone 7 version. Nice! The database Before running the code for this app you will need to create the database. First, create a database called MVVMProject in SQL Server, then run MVVMProject.sql in the MVVMProject/Database directory of your downloaded .zip file. This should give you a Task table with 3 records in it. When you fire up the solution you will also need to update the connection string in web.config to point to your database instead of IBM12\SQLSERVER2008. The code One note about this code is that it runs against the latest Silverlight 4 RC and WCF RIA Services code. Please see my first blog post about updating to the RC bits. Beta to RC - Part 1 At the top of this post is a link to a sample project that demonstrates a sample application with a Tasks page that uses the MVVM pattern. This is a simplified version of how I have implemented the Tasks page in the Task-It application. Youll notice that Tasks.xaml has very little code to it. Just a TextBlock that displays the page title and a ContentControl. <StackPanel> <TextBlock Text="Tasks" Style="{StaticResource PageTitleStyle}"/> <Rectangle Style="{StaticResource StandardSpacerStyle}"/> <ContentControl x:Name="ContentControl1"/> </StackPanel> In List.xaml we have a RadGridView. Notice that the ItemsSource is bound to a property in the view model class call Tasks, SelectedItem is bound to a property in the view model called SelectedItem, and IsBusy is bound to a property in the view model called IsLoading. <Grid> <telerikGridView:RadGridView ItemsSource="{Binding Tasks}" SelectedItem="{Binding SelectedItem, Mode=TwoWay}" IsBusy="{Binding IsLoading}" AutoGenerateColumns="False" IsReadOnly="True" RowIndicatorVisibility="Collapsed" IsFilteringAllowed="False" ShowGroupPanel="False"> <telerikGridView:RadGridView.Columns> <telerikGridView:GridViewDataColumn Header="Name" DataMemberBinding="{Binding Name}" Width="3*"/> <telerikGridView:GridViewDataColumn Header="Due" DataMemberBinding="{Binding DueDate}" DataFormatString="{}{0:d}" Width="*"/> </telerikGridView:RadGridView.Columns> </telerikGridView:RadGridView> </Grid> In Details.xaml we have a Save button that is bound to a property called SaveCommand in our view model. We also have a simple form (Im using a couple of controls here from Silverlight.FX for the form layout, FormPanel and Label simply because they make for a clean XAML layout). Notice that the FormPanel is also bound to the SelectedItem in the view model (the same one that the RadGridView is). The two form controls, the TextBox and RadDatePicker) are bound to the SelectedItem's Name and DueDate properties. These are properties of the Task object that WCF RIA Services creates. <StackPanel> <Button Content="Save" Command="{Binding SaveCommand}" HorizontalAlignment="Left"/> <Rectangle Style="{StaticResource StandardSpacerStyle}"/> <fxui:FormPanel DataContext="{Binding SelectedItem}" Style="{StaticResource FormContainerStyle}"> <fxui:Label Text="Name:"/> <TextBox Text="{Binding Name, Mode=TwoWay}"/> <fxui:Label Text="Due:"/> <telerikInput:RadDatePicker SelectedDate="{Binding DueDate, Mode=TwoWay}"/> </fxui:FormPanel> </StackPanel> In the code-behind of the Tasks control, Tasks.xaml.cs, I created an instance of the view model class (TasksViewModel) in the constructor and set it as the DataContext for the control. The Tasks page will load one of two child UserControls depending on whether you are viewing the list of tasks (List.xaml) or the form for editing a task (Details.xaml). // Set the DataContext to an instance of the view model class var viewModel = new TasksViewModel(); DataContext = viewModel; // Child user controls (inherit DataContext from this user control) List = new List(); // RadGridView Details = new Details(); // Form When the page first loads, the List is loaded into the ContentControl. // Show the RadGridView first ContentControl1.Content = List; In the code-behind we also listen for a couple of the view models events. The ItemSelected event will be fired when the user clicks on a record in the RadGridView in the List control. The SaveCompleted event will be fired when the user clicks Save in the Details control (the form). Here the view model is in control, and is letting the view know when something needs to change. // Listeners for the view model's events viewModel.ItemSelected += OnItemSelected; viewModel.SaveCompleted += OnSaveCompleted; The event handlers toggle the view between the RadGridView (List) and the form (Details). void OnItemSelected(object sender, RoutedEventArgs e) { // Show the form ContentControl1.Content = Details; } void OnSaveCompleted(object sender, RoutedEventArgs e) { // Show the RadGridView ContentControl1.Content = List; } In TasksViewModel, we instantiate a DataContext object and a SaveCommand in the constructor. DataContext is a WCF RIA Services object that well use to retrieve the list of Tasks and to save any changes to a task. Ill talk more about this and Commands in future post, but for now think of the SaveCommand as an event handler that is called when the Save button in the form is clicked. DataContext = new DataContext(); SaveCommand = new DelegateCommand(OnSave); When the TasksViewModel constructor is called we also make a call to LoadTasks. This sets IsLoading to true (which causes the RadGridViews busy indicator to appear) and retrieves the records via WCF RIA Services. public LoadOperation<Task> LoadTasks() { // Show the loading message IsLoading = true; // Get the data via WCF RIA Services. When the call has returned, called OnTasksLoaded. return DataContext.Load(DataContext.GetTasksQuery(), OnTasksLoaded, false); } When the data is returned, OnTasksLoaded is called. This sets IsLoading to false (which hides the RadGridViews busy indicator), and fires property changed notifications to the UI to let it know that the IsLoading and Tasks properties have changed. This property changed notification basically tells the UI to rebind. void OnTasksLoaded(LoadOperation<Task> lo) { // Hide the loading message IsLoading = false; // Notify the UI that Tasks and IsLoading properties have changed this.OnPropertyChanged(p => p.Tasks); this.OnPropertyChanged(p => p.IsLoading); } Next lets look at the view models SelectedItem property. This is the one thats bound to both the RadGridView and the form. When the user clicks a record in the RadGridView its setter gets called (set a breakpoint and see what I mean). The other code in the setter lets the UI know that the SelectedItem has changed (so the form displays the correct data), and fires the event that notifies the UI that a selection has occurred (which tells the UI to switch from List to Details). public Task SelectedItem { get { return _selectedItem; } set { _selectedItem = value; // Let the UI know that the SelectedItem has changed (forces it to re-bind) this.OnPropertyChanged(p => p.SelectedItem); // Notify the UI, so it can switch to the Details (form) page NotifyItemSelected(); } } One last thing, saving the data. When the Save button in the form is clicked it fires the SaveCommand, which calls the OnSave method in the view model (once again, set a breakpoint to see it in action). public void OnSave() { // Save the changes via WCF RIA Services. When the save is complete, call OnSaveCompleted. DataContext.SubmitChanges(OnSaveCompleted, null); } In OnSave, we tell WCF RIA Services to submit any changes, which there will be if you changed either the Name or the Due Date in the form. When the save is completed, it calls OnSaveCompleted. This method fires a notification back to the UI that the save is completed, which causes the RadGridView (List) to show again. public virtual void OnSaveCompleted(SubmitOperation so) { // Clear the item that is selected in the grid (in case we want to select it again) SelectedItem = null; // Notify the UI, so it can switch back to the List (RadGridView) page NotifySaveCompleted(); } Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Search Results

Search found 28563 results on 1143 pages for 'strange but true'.

Page 418/1143 | < Previous Page | 414 415 416 417 418 419 420 421 422 423 424 425 | Next Page >

- by dav.evans

- by user279244

- by peter

- by vaibhav

- by thangchung

- by Rob Bushway

- by Cobby

- by Ricardo Peres

- by antony.reynolds

- by John

- by JeffCren

- by Mark Virtue

- by user353573

- by Jack Sparrow

- by tloflin

- by Nemi

- by Alex

- by James Michael Hare

- by FransBouma

- by Pinu

- by ChaosPandion

- by Jordan Magnuson

< Previous Page | 414 415 416 417 418 419 420 421 422 423 424 425 | Next Page >