Search Results

Search found 10852 results on 435 pages for 'tool'.

Page 418/435 | < Previous Page | 414 415 416 417 418 419 420 421 422 423 424 425  | Next Page >

• Building an Infrastructure Cloud with Oracle VM for x86 + Enterprise Manager 12c

  - by Richard Rotter

  Cloud Computing? Everyone is talking about Cloud these days. Everyone is explaining how the cloud will help you to bring your service up and running very fast, secure and with little effort. You can find these kinds of presentations at almost every event around the globe. But what is really behind all this stuff? Is it really so simple? And the answer is: Yes it is! With the Oracle SW Stack it is! In this post, I will try to bring this down to earth, demonstrating how easy it could be to build a cloud infrastructure with Oracle's solution for cloud computing.But let me cover some basics first: How fast can you build a cloud?How elastic is your cloud so you can provide new services on demand? How much effort does it take to monitor and operate your Cloud Infrastructure in order to meet your SLAs?How easy is it to chargeback for your services provided? These are the critical success factors of Cloud Computing. And Oracle has an answer to all those questions. By using Oracle VM for X86 in combination with Enterprise Manager 12c you can build and control your cloud environment very fast and easy. What are the fundamental building blocks for your cloud? Oracle Cloud Building Blocks #1 Hardware Surprise, surprise. Even the cloud needs to run somewhere, hence you will need hardware. This HW normally consists of servers, storage and networking. But Oracles goes beyond that. There are Optimized Solutions available for your cloud infrastructure. This is a cookbook to build your HW cloud platform. For example, building your cloud infrastructure with blades and our network infrastructure will reduce complexity in your datacenter (Blades with switch network modules, splitter cables to reduce the amount of cables, TOR (Top Of the Rack) switches which are building the interface to your infrastructure environment. Reducing complexity even in the cabling will help you to manage your environment more efficient and with less risk. Of course, our engineered systems fit into the cloud perfectly too. Although they are considered as a PaaS themselves, having the database SW (for Exadata) and the application development environment (for Exalogic) already deployed on them, in general they are ideal systems to enable you building your own cloud and PaaS infrastructure. #2 Virtualization The next missing link in the cloud setup is virtualization. For me personally, it's one of the most hidden "secret", that oracle can provide you with a complete virtualization stack in terms of a hypervisor on both architectures: X86 and Sparc CPUs. There is Oracle VM for X86 and Oracle VM for Sparc available at no additional  license costs if your are running this virtualization stack on top of Oracle HW (and with Oracle Premier Support for HW). This completes the virtualization portfolio together with Solaris Zones introduced already with Solaris 10 a few years ago. Let me explain how Oracle VM for X86 works: Oracle VM for x86 consists of two main parts: - The Oracle VM Server: Oracle VM Server is installed on bare metal and it is the hypervisor which is able to run virtual machines. It has a very small footprint. The ISO-Image of Oracle VM Server is only 200MB large. It is very small but efficient. You can install a OVM-Server in less than 5 mins by booting the Server with the ISO-Image assigned and providing the necessary configuration parameters (like installing an Linux distribution). After the installation, the OVM-Server is ready to use. That's all. - The Oracle VM-Manager: OVM-Manager is the central management tool where you can control your OVM-Servers. OVM-Manager provides the graphical user interface, which is an Application Development Framework (ADF) application, with a familiar web-browser based interface, to manage Oracle VM Servers, virtual machines, and resources. The Oracle VM Manager has the following capabilities: Create virtual machines Create server pools Power on and off virtual machines Manage networks and storage Import virtual machines, ISO files, and templates Manage high availability of Oracle VM Servers, server pools, and virtual machines Perform live migration of virtual machines I want to highlight one of the goodies which you can use if you are running Oracle VM for X86: Preconfigured, downloadable Virtual Machine Templates form edelivery With these templates, you can download completely preconfigured Virtual Machines in your environment, boot them up, configure them at first time boot and use it. There are templates for almost all Oracle SW and Applications (like Fusion Middleware, Database, Siebel, etc.) available. #3) Cloud Management The management of your cloud infrastructure is key. This is a day-to-day job. Acquiring HW, installing a virtualization layer on top of it is done just at the beginning and if you want to expand your infrastructure. But managing your cloud, keeping it up and running, deploying new services, changing your chargeback model, etc, these are the daily jobs. These jobs must be simple, secure and easy to manage. The Enterprise Manager 12c Cloud provides this functionality from one management cockpit. Enterprise Manager 12c uses Oracle VM Manager to control OVM Serverpools. Once you registered your OVM-Managers in Enterprise Manager, then you are able to setup your cloud infrastructure and manage everything from Enterprise Manager. What you need to do in EM12c is: ">Register your OVM Manager in Enterprise ManagerAfter Registering your OVM Manager, all the functionality of Oracle VM for X86 is also available in Enterprise Manager. Enterprise Manager works as a "Manger" of the Manager. You can register as many OVM-Managers you want and control your complete virtualization environment Create Roles and Users for your Self Service Portal in Enterprise ManagerWith this step you allow users to logon on the Enterprise Manager Self Service Portal. Users can request Virtual Machines in this portal. Setup the Cloud InfrastructureSetup the Quotas for your self service users. How many VMs can they request? How much of your resources ( cpu, memory, storage, network, etc. etc.)? Which SW components (templates, assemblys) can your self service users request? In this step, you basically set up the complete cloud infrastructure. Setup ChargebackOnce your cloud is set up, you need to configure your chargeback mechanism. The Enterprise Manager collects the resources metrics, which are used in a very deep level. Almost all collected Metrics could be used in the chargeback module. You can define chargeback plans based on configurations (charge for the amount of cpu, memory, storage is assigned to a machine, or for a specific OS which is installed) or chargeback on resource consumption (% of cpu used, storage used, etc). Or you can also define a combination of configuration and consumption chargeback plans. The chargeback module is very flexible. Here is a overview of the workflow how to handle infrastructure cloud in EM: Summary As you can see, setting up an Infrastructure Cloud Service with Oracle VM for X86 and Enterprise Manager 12c is really simple. I personally configured a complete cloud environment with three X86 servers and a small JBOD san box in less than 3 hours. There is no magic in it, it is all straightforward. Of course, you have to have some experience with Oracle VM and Enterprise Manager. Experience in setting up Linux environments helps as well. I plan to publish a technical cookbook in the next few weeks. I hope you found this post useful and will see you again here on our blog. Any hints, comments are welcome!

  Read the article

• SQL Server Table Polling by Multiple Subscribers

  - by Daniel Hester

  Background Designing Stored Procedures that are safe for multiple subscribers (to call simultaneously) can be challenging.  For example let’s say that you want multiple worker processes to poll a shared work queue that’s encapsulated as a SQL Table. This is a common scenario and through experience you’ll find that you want to use Table Hints to prevent unwanted locking when performing simultaneous queries on the same table. There are three table hints to consider: NOLOCK, READPAST and UPDLOCK. Both NOLOCK and READPAST table hints allow you to SELECT from a table without placing a LOCK on that table. However, SELECTs with the READPAST hint will ignore any records that are locked due to being updated/inserted (or otherwise “dirty”), whereas a SELECT with NOLOCK ignores all locks including dirty reads. For the initial update of the flag (that marks the record as available for subscription) I don’t use the NOLOCK Table Hint because I want to be sensitive to the “active” records in the table and I want to exclude them.  I use an Update Lock (UPDLOCK) in conjunction with a WHERE clause that uses a sub-select with a READPAST Table Hint in order to explicitly lock the records I’m updating (UPDLOCK) but not place a lock on the table when selecting the records that I’m going to update (READPAST). UPDATES should be allowed to lock the rows affected because we’re probably changing a flag on a record so that it is not included in a SELECT from another subscriber. On the UPDATE statement we should explicitly use the UPDLOCK to guard against lock escalation. A SELECT to check for the next record(s) to process can result in a shared read lock being held by more than one subscriber polling the shared work queue (SQL table). It is expected that more than one worker process (or server) might try to process the same new record(s) at the same time. When each process then tries to obtain the update lock, none of them can because another process has a shared read lock in place. Thus without the UPDLOCK hint the result would be a lock escalation deadlock; however with the UPDLOCK hint this condition is mitigated against. Note that using the READPAST table hint requires that you also set the ISOLATION LEVEL of the transaction to be READ COMMITTED (rather than the default of SERIALIZABLE). Guidance In the Stored Procedure that returns records to the multiple subscribers: Perform the UPDATE first. Change the flag that makes the record available to subscribers.  Additionally, you may want to update a LastUpdated datetime field in order to be able to check for records that “got stuck” in an intermediate state or for other auditing purposes. In the UPDATE statement use the (UPDLOCK) Table Hint on the UPDATE statement to prevent lock escalation. In the UPDATE statement also use a WHERE Clause that uses a sub-select with a (READPAST) Table Hint to select the records that you’re going to update. In the UPDATE statement use the OUTPUT clause in conjunction with a Temporary Table to isolate the record(s) that you’ve just updated and intend to return to the subscriber. This is the fastest way to update the record(s) and to get the records’ identifiers within the same operation. Finally do a set-based SELECT on the main Table (using the Temporary Table to identify the records in the set) with either a READPAST or NOLOCK table hint.  Use NOLOCK if there are other processes (besides the multiple subscribers) that might be changing the data that you want to return to the multiple subscribers; or use READPAST if you're sure there are no other processes (besides the multiple subscribers) that might be updating column data in the table for other purposes (e.g. changes to a person’s last name).  NOLOCK is generally the better fit in this part of the scenario. See the following as an example: CREATE PROCEDURE [dbo].[usp_NewCustomersSelect] AS BEGIN -- OVERRIDE THE DEFAULT ISOLATION LEVEL SET TRANSACTION ISOLATION LEVEL READ COMMITTED -- SET NOCOUNT ON SET NOCOUNT ON -- DECLARE TEMP TABLE -- Note that this example uses CustomerId as an identifier; -- you could just use the Identity column Id if that’s all you need. DECLARE @CustomersTempTable TABLE ( CustomerId NVARCHAR(255) ) -- PERFORM UPDATE FIRST -- [Customers] is the name of the table -- [Id] is the Identity Column on the table -- [CustomerId] is the business document key used to identify the -- record globally, i.e. in other systems or across SQL tables -- [Status] is INT or BIT field (if the status is a binary state) -- [LastUpdated] is a datetime field used to record the time of the -- last update UPDATE [Customers] WITH (UPDLOCK) SET [Status] = 1, [LastUpdated] = GETDATE() OUTPUT [INSERTED].[CustomerId] INTO @CustomersTempTable WHERE ([Id] = (SELECT TOP 100 [Id] FROM [Customers] WITH (READPAST) WHERE ([Status] = 0) ORDER BY [Id] ASC)) -- PERFORM SELECT FROM ENTITY TABLE SELECT [C].[CustomerId], [C].[FirstName], [C].[LastName], [C].[Address1], [C].[Address2], [C].[City], [C].[State], [C].[Zip], [C].[ShippingMethod], [C].[Id] FROM [Customers] AS [C] WITH (NOLOCK), @CustomersTempTable AS [TEMP] WHERE ([C].[CustomerId] = [TEMP].[CustomerId]) END In a system that has been designed to have multiple status values for records that need to be processed in the Work Queue it is necessary to have a “Watch Dog” process by which “stale” records in intermediate states (such as “In Progress”) are detected, i.e. a [Status] of 0 = New or Unprocessed; a [Status] of 1 = In Progress; a [Status] of 2 = Processed; etc.. Thus, if you have a business rule that states that the application should only process new records if all of the old records have been processed successfully (or marked as an error), then it will be necessary to build a monitoring process to detect stalled or stale records in the Work Queue, hence the use of the LastUpdated column in the example above. The Status field along with the LastUpdated field can be used as the criteria to detect stalled / stale records. It is possible to put this watchdog logic into the stored procedure above, but I would recommend making it a separate monitoring function. In writing the stored procedure that checks for stale records I would recommend using the same kind of lock semantics as suggested above. The example below looks for records that have been in the “In Progress” state ([Status] = 1) for greater than 60 seconds: CREATE PROCEDURE [dbo].[usp_NewCustomersWatchDog] AS BEGIN -- TO OVERRIDE THE DEFAULT ISOLATION LEVEL SET TRANSACTION ISOLATION LEVEL READ COMMITTED -- SET NOCOUNT ON SET NOCOUNT ON DECLARE @MaxWait int; SET @MaxWait = 60 IF EXISTS (SELECT 1 FROM [dbo].[Customers] WITH (READPAST) WHERE ([Status] = 1) AND (DATEDIFF(s, [LastUpdated], GETDATE()) > @MaxWait)) BEGIN SELECT 1 AS [IsWatchDogError] END ELSE BEGIN SELECT 0 AS [IsWatchDogError] END END Downloads The zip file below contains two SQL scripts: one to create a sample database with the above stored procedures and one to populate the sample database with 10,000 sample records.  I am very grateful to Red-Gate software for their excellent SQL Data Generator tool which enabled me to create these sample records in no time at all. References http://msdn.microsoft.com/en-us/library/ms187373.aspx http://www.techrepublic.com/article/using-nolock-and-readpast-table-hints-in-sql-server/6185492 http://geekswithblogs.net/gwiele/archive/2004/11/25/15974.aspx http://grounding.co.za/blogs/romiko/archive/2009/03/09/biztalk-sql-receive-location-deadlocks-dirty-reads-and-isolation-levels.aspx

  Read the article

• When is a Seek not a Seek?

  - by Paul White

  The following script creates a single-column clustered table containing the integers from 1 to 1,000 inclusive. IF OBJECT_ID(N'tempdb..#Test', N'U') IS NOT NULL DROP TABLE #Test ; GO CREATE TABLE #Test ( id INTEGER PRIMARY KEY CLUSTERED ); ; INSERT #Test (id) SELECT V.number FROM master.dbo.spt_values AS V WHERE V.[type] = N'P' AND V.number BETWEEN 1 AND 1000 ; Let’s say we need to find the rows with values from 100 to 170, excluding any values that divide exactly by 10.  One way to write that query would be: SELECT T.id FROM #Test AS T WHERE T.id IN ( 101,102,103,104,105,106,107,108,109, 111,112,113,114,115,116,117,118,119, 121,122,123,124,125,126,127,128,129, 131,132,133,134,135,136,137,138,139, 141,142,143,144,145,146,147,148,149, 151,152,153,154,155,156,157,158,159, 161,162,163,164,165,166,167,168,169 ) ; That query produces a pretty efficient-looking query plan: Knowing that the source column is defined as an INTEGER, we could also express the query this way: SELECT T.id FROM #Test AS T WHERE T.id >= 101 AND T.id <= 169 AND T.id % 10 > 0 ; We get a similar-looking plan: If you look closely, you might notice that the line connecting the two icons is a little thinner than before.  The first query is estimated to produce 61.9167 rows – very close to the 63 rows we know the query will return.  The second query presents a tougher challenge for SQL Server because it doesn’t know how to predict the selectivity of the modulo expression (T.id % 10 > 0).  Without that last line, the second query is estimated to produce 68.1667 rows – a slight overestimate.  Adding the opaque modulo expression results in SQL Server guessing at the selectivity.  As you may know, the selectivity guess for a greater-than operation is 30%, so the final estimate is 30% of 68.1667, which comes to 20.45 rows. The second difference is that the Clustered Index Seek is costed at 99% of the estimated total for the statement.  For some reason, the final SELECT operator is assigned a small cost of 0.0000484 units; I have absolutely no idea why this is so, or what it models.  Nevertheless, we can compare the total cost for both queries: the first one comes in at 0.0033501 units, and the second at 0.0034054.  The important point is that the second query is costed very slightly higher than the first, even though it is expected to produce many fewer rows (20.45 versus 61.9167). If you run the two queries, they produce exactly the same results, and both complete so quickly that it is impossible to measure CPU usage for a single execution.  We can, however, compare the I/O statistics for a single run by running the queries with STATISTICS IO ON: Table '#Test'. Scan count 63, logical reads 126, physical reads 0. Table '#Test'. Scan count 01, logical reads 002, physical reads 0. The query with the IN list uses 126 logical reads (and has a ‘scan count’ of 63), while the second query form completes with just 2 logical reads (and a ‘scan count’ of 1).  It is no coincidence that 126 = 63 * 2, by the way.  It is almost as if the first query is doing 63 seeks, compared to one for the second query. In fact, that is exactly what it is doing.  There is no indication of this in the graphical plan, or the tool-tip that appears when you hover your mouse over the Clustered Index Seek icon.  To see the 63 seek operations, you have click on the Seek icon and look in the Properties window (press F4, or right-click and choose from the menu): The Seek Predicates list shows a total of 63 seek operations – one for each of the values from the IN list contained in the first query.  I have expanded the first seek node to show the details; it is seeking down the clustered index to find the entry with the value 101.  Each of the other 62 nodes expands similarly, and the same information is contained (even more verbosely) in the XML form of the plan. Each of the 63 seek operations starts at the root of the clustered index B-tree and navigates down to the leaf page that contains the sought key value.  Our table is just large enough to need a separate root page, so each seek incurs 2 logical reads (one for the root, and one for the leaf).  We can see the index depth using the INDEXPROPERTY function, or by using the a DMV: SELECT S.index_type_desc, S.index_depth FROM sys.dm_db_index_physical_stats ( DB_ID(N'tempdb'), OBJECT_ID(N'tempdb..#Test', N'U'), 1, 1, DEFAULT ) AS S ; Let’s look now at the Properties window when the Clustered Index Seek from the second query is selected: There is just one seek operation, which starts at the root of the index and navigates the B-tree looking for the first key that matches the Start range condition (id >= 101).  It then continues to read records at the leaf level of the index (following links between leaf-level pages if necessary) until it finds a row that does not meet the End range condition (id <= 169).  Every row that meets the seek range condition is also tested against the Residual Predicate highlighted above (id % 10 > 0), and is only returned if it matches that as well. You will not be surprised that the single seek (with a range scan and residual predicate) is much more efficient than 63 singleton seeks.  It is not 63 times more efficient (as the logical reads comparison would suggest), but it is around three times faster.  Let’s run both query forms 10,000 times and measure the elapsed time: DECLARE @i INTEGER, @n INTEGER = 10000, @s DATETIME = GETDATE() ; SET NOCOUNT ON; SET STATISTICS XML OFF; ; WHILE @n > 0 BEGIN SELECT @i = T.id FROM #Test AS T WHERE T.id IN ( 101,102,103,104,105,106,107,108,109, 111,112,113,114,115,116,117,118,119, 121,122,123,124,125,126,127,128,129, 131,132,133,134,135,136,137,138,139, 141,142,143,144,145,146,147,148,149, 151,152,153,154,155,156,157,158,159, 161,162,163,164,165,166,167,168,169 ) ; SET @n -= 1; END ; PRINT DATEDIFF(MILLISECOND, @s, GETDATE()) ; GO DECLARE @i INTEGER, @n INTEGER = 10000, @s DATETIME = GETDATE() ; SET NOCOUNT ON ; WHILE @n > 0 BEGIN SELECT @i = T.id FROM #Test AS T WHERE T.id >= 101 AND T.id <= 169 AND T.id % 10 > 0 ; SET @n -= 1; END ; PRINT DATEDIFF(MILLISECOND, @s, GETDATE()) ; On my laptop, running SQL Server 2008 build 4272 (SP2 CU2), the IN form of the query takes around 830ms and the range query about 300ms.  The main point of this post is not performance, however – it is meant as an introduction to the next few parts in this mini-series that will continue to explore scans and seeks in detail. When is a seek not a seek?  When it is 63 seeks © Paul White 2011 email: [email protected] twitter: @SQL_kiwi

  Read the article

• The Sensemaking Spectrum for Business Analytics: Translating from Data to Business Through Analysis

  - by Joe Lamantia

  One of the most compelling outcomes of our strategic research efforts over the past several years is a growing vocabulary that articulates our cumulative understanding of the deep structure of the domains of discovery and business analytics. Modes are one example of the deep structure we’ve found.  After looking at discovery activities across a very wide range of industries, question types, business needs, and problem solving approaches, we've identified distinct and recurring kinds of sensemaking activity, independent of context.  We label these activities Modes: Explore, compare, and comprehend are three of the nine recognizable modes.  Modes describe *how* people go about realizing insights.  (Read more about the programmatic research and formal academic grounding and discussion of the modes here: https://www.researchgate.net/publication/235971352_A_Taxonomy_of_Enterprise_Search_and_Discovery) By analogy to languages, modes are the 'verbs' of discovery activity.  When applied to the practical questions of product strategy and development, the modes of discovery allow one to identify what kinds of analytical activity a product, platform, or solution needs to support across a spread of usage scenarios, and then make concrete and well-informed decisions about every aspect of the solution, from high-level capabilities, to which specific types of information visualizations better enable these scenarios for the types of data users will analyze. The modes are a powerful generative tool for product making, but if you've spent time with young children, or had a really bad hangover (or both at the same time...), you understand the difficult of communicating using only verbs.  So I'm happy to share that we've found traction on another facet of the deep structure of discovery and business analytics.  Continuing the language analogy, we've identified some of the ‘nouns’ in the language of discovery: specifically, the consistently recurring aspects of a business that people are looking for insight into.  We call these discovery Subjects, since they identify *what* people focus on during discovery efforts, rather than *how* they go about discovery as with the Modes. Defining the collection of Subjects people repeatedly focus on allows us to understand and articulate sense making needs and activity in more specific, consistent, and complete fashion.  In combination with the Modes, we can use Subjects to concretely identify and define scenarios that describe people’s analytical needs and goals.  For example, a scenario such as ‘Explore [a Mode] the attrition rates [a Measure, one type of Subject] of our largest customers [Entities, another type of Subject] clearly captures the nature of the activity — exploration of trends vs. deep analysis of underlying factors — and the central focus — attrition rates for customers above a certain set of size criteria — from which follow many of the specifics needed to address this scenario in terms of data, analytical tools, and methods. We can also use Subjects to translate effectively between the different perspectives that shape discovery efforts, reducing ambiguity and increasing impact on both sides the perspective divide.  For example, from the language of business, which often motivates analytical work by asking questions in business terms, to the perspective of analysis.  The question posed to a Data Scientist or analyst may be something like “Why are sales of our new kinds of potato chips to our largest customers fluctuating unexpectedly this year?” or “Where can innovate, by expanding our product portfolio to meet unmet needs?”.  Analysts translate questions and beliefs like these into one or more empirical discovery efforts that more formally and granularly indicate the plan, methods, tools, and desired outcomes of analysis.  From the perspective of analysis this second question might become, “Which customer needs of type ‘A', identified and measured in terms of ‘B’, that are not directly or indirectly addressed by any of our current products, offer 'X' potential for ‘Y' positive return on the investment ‘Z' required to launch a new offering, in time frame ‘W’?  And how do these compare to each other?”.  Translation also happens from the perspective of analysis to the perspective of data; in terms of availability, quality, completeness, format, volume, etc. By implication, we are proposing that most working organizations — small and large, for profit and non-profit, domestic and international, and in the majority of industries — can be described for analytical purposes using this collection of Subjects.  This is a bold claim, but simplified articulation of complexity is one of the primary goals of sensemaking frameworks such as this one.  (And, yes, this is in fact a framework for making sense of sensemaking as a category of activity - but we’re not considering the recursive aspects of this exercise at the moment.) Compellingly, we can place the collection of subjects on a single continuum — we call it the Sensemaking Spectrum — that simply and coherently illustrates some of the most important relationships between the different types of Subjects, and also illuminates several of the fundamental dynamics shaping business analytics as a domain.  As a corollary, the Sensemaking Spectrum also suggests innovation opportunities for products and services related to business analytics. The first illustration below shows Subjects arrayed along the Sensemaking Spectrum; the second illustration presents examples of each kind of Subject.  Subjects appear in colors ranging from blue to reddish-orange, reflecting their place along the Spectrum, which indicates whether a Subject addresses more the viewpoint of systems and data (Data centric and blue), or people (User centric and orange).  This axis is shown explicitly above the Spectrum.  Annotations suggest how Subjects align with the three significant perspectives of Data, Analysis, and Business that shape business analytics activity.  This rendering makes explicit the translation and bridging function of Analysts as a role, and analysis as an activity. Subjects are best understood as fuzzy categories [http://georgelakoff.files.wordpress.com/2011/01/hedges-a-study-in-meaning-criteria-and-the-logic-of-fuzzy-concepts-journal-of-philosophical-logic-2-lakoff-19731.pdf], rather than tightly defined buckets.  For each Subject, we suggest some of the most common examples: Entities may be physical things such as named products, or locations (a building, or a city); they could be Concepts, such as satisfaction; or they could be Relationships between entities, such as the variety of possible connections that define linkage in social networks.  Likewise, Events may indicate a time and place in the dictionary sense; or they may be Transactions involving named entities; or take the form of Signals, such as ‘some Measure had some value at some time’ - what many enterprises understand as alerts.   The central story of the Spectrum is that though consumers of analytical insights (represented here by the Business perspective) need to work in terms of Subjects that are directly meaningful to their perspective — such as Themes, Plans, and Goals — the working realities of data (condition, structure, availability, completeness, cost) and the changing nature of most discovery efforts make direct engagement with source data in this fashion impossible.  Accordingly, business analytics as a domain is structured around the fundamental assumption that sense making depends on analytical transformation of data.  Analytical activity incrementally synthesizes more complex and larger scope Subjects from data in its starting condition, accumulating insight (and value) by moving through a progression of stages in which increasingly meaningful Subjects are iteratively synthesized from the data, and recombined with other Subjects.  The end goal of  ‘laddering’ successive transformations is to enable sense making from the business perspective, rather than the analytical perspective.Synthesis through laddering is typically accomplished by specialized Analysts using dedicated tools and methods. Beginning with some motivating question such as seeking opportunities to increase the efficiency (a Theme) of fulfillment processes to reach some level of profitability by the end of the year (Plan), Analysts will iteratively wrangle and transform source data Records, Values and Attributes into recognizable Entities, such as Products, that can be combined with Measures or other data into the Events (shipment of orders) that indicate the workings of the business.  More complex Subjects (to the right of the Spectrum) are composed of or make reference to less complex Subjects: a business Process such as Fulfillment will include Activities such as confirming, packing, and then shipping orders.  These Activities occur within or are conducted by organizational units such as teams of staff or partner firms (Networks), composed of Entities which are structured via Relationships, such as supplier and buyer.  The fulfillment process will involve other types of Entities, such as the products or services the business provides.  The success of the fulfillment process overall may be judged according to a sophisticated operating efficiency Model, which includes tiered Measures of business activity and health for the transactions and activities included.  All of this may be interpreted through an understanding of the operational domain of the businesses supply chain (a Domain).   We'll discuss the Spectrum in more depth in succeeding posts.

  Read the article

• Integration Patterns with Azure Service Bus Relay, Part 3: Anonymous partial-trust consumer

  - by Elton Stoneman

  This is the third in the IPASBR series, see also: Integration Patterns with Azure Service Bus Relay, Part 1: Exposing the on-premise service Integration Patterns with Azure Service Bus Relay, Part 2: Anonymous full-trust .NET consumer As the patterns get further from the simple .NET full-trust consumer, all that changes is the communication protocol and the authentication mechanism. In Part 3 the scenario is that we still have a secure .NET environment consuming our service, so we can store shared keys securely, but the runtime environment is locked down so we can't use Microsoft.ServiceBus to get the nice WCF relay bindings. To support this we will expose a RESTful endpoint through the Azure Service Bus, and require the consumer to send a security token with each HTTP service request. Pattern applicability This is a good fit for scenarios where: the runtime environment is secure enough to keep shared secrets the consumer can execute custom code, including building HTTP requests with custom headers the consumer cannot use the Azure SDK assemblies the service may need to know who is consuming it the service does not need to know who the end-user is Note there isn't actually a .NET requirement here. By exposing the service in a REST endpoint, anything that can talk HTTP can be a consumer. We'll authenticate through ACS which also gives us REST endpoints, so the service is still accessed securely. Our real-world example would be a hosted cloud app, where we we have enough room in the app's customisation to keep the shared secret somewhere safe and to hook in some HTTP calls. We will be flowing an identity through to the on-premise service now, but it will be the service identity given to the consuming app - the end user's identity isn't flown through yet. In this post, we’ll consume the service from Part 1 in ASP.NET using the WebHttpRelayBinding. The code for Part 3 (+ Part 1) is on GitHub here: IPASBR Part 3. Authenticating and authorizing with ACS We'll follow the previous examples and add a new service identity for the namespace in ACS, so we can separate permissions for different consumers (see walkthrough in Part 1). I've named the identity partialTrustConsumer. We’ll be authenticating against ACS with an explicit HTTP call, so we need a password credential rather than a symmetric key – for a nice secure option, generate a symmetric key, copy to the clipboard, then change type to password and paste in the key: We then need to do the same as in Part 2 , add a rule to map the incoming identity claim to an outgoing authorization claim that allows the identity to send messages to Service Bus: Issuer: Access Control Service Input claim type: http://schemas.xmlsoap.org/ws/2005/05/identity/claims/nameidentifier Input claim value: partialTrustConsumer Output claim type: net.windows.servicebus.action Output claim value: Send As with Part 2, this sets up a service identity which can send messages into Service Bus, but cannot register itself as a listener, or manage the namespace. RESTfully exposing the on-premise service through Azure Service Bus Relay The part 3 sample code is ready to go, just put your Azure details into Solution Items\AzureConnectionDetails.xml and “Run Custom Tool” on the .tt files.  But to do it yourself is very simple. We already have a WebGet attribute in the service for locally making REST calls, so we are just going to add a new endpoint which uses the WebHttpRelayBinding to relay that service through Azure. It's as easy as adding this endpoint to Web.config for the service:         <endpoint address="https://sixeyed-ipasbr.servicebus.windows.net/rest"                   binding="webHttpRelayBinding"                    contract="Sixeyed.Ipasbr.Services.IFormatService"                   behaviorConfiguration="SharedSecret">         </endpoint> - and adding the webHttp attribute in your endpoint behavior:           <behavior name="SharedSecret">             <webHttp/>             <transportClientEndpointBehavior credentialType="SharedSecret">               <clientCredentials>                 <sharedSecret issuerName="serviceProvider"                               issuerSecret="gl0xaVmlebKKJUAnpripKhr8YnLf9Neaf6LR53N8uGs="/>               </clientCredentials>             </transportClientEndpointBehavior>           </behavior> Where's my WSDL? The metadata story for REST is a bit less automated. In our local webHttp endpoint we've enabled WCF's built-in help, so if you navigate to: http://localhost/Sixeyed.Ipasbr.Services/FormatService.svc/rest/help - you'll see the uri format for making a GET request to the service. The format is the same over Azure, so this is where you'll be connecting: https://[your-namespace].servicebus.windows.net/rest/reverse?string=abc123 Build the service with the new endpoint, open that in a browser and you'll get an XML version of an HTTP status code - a 401 with an error message stating that you haven’t provided an authorization header: <?xml version="1.0"?><Error><Code>401</Code><Detail>MissingToken: The request contains no authorization header..TrackingId:4cb53408-646b-4163-87b9-bc2b20cdfb75_5,TimeStamp:10/3/2012 8:34:07 PM</Detail></Error> By default, the setup of your Service Bus endpoint as a relying party in ACS expects a Simple Web Token to be presented with each service request, and in the browser we're not passing one, so we can't access the service. Note that this request doesn't get anywhere near your on-premise service, Service Bus only relays requests once they've got the necessary approval from ACS. Why didn't the consumer need to get ACS authorization in Part 2? It did, but it was all done behind the scenes in the NetTcpRelayBinding. By specifying our Shared Secret credentials in the consumer, the service call is preceded by a check on ACS to see that the identity provided is a) valid, and b) allowed access to our Service Bus endpoint. By making manual HTTP requests, we need to take care of that ACS check ourselves now. We do that with a simple WebClient call to the ACS endpoint of our service; passing the shared secret credentials, we will get back an SWT: var values = new System.Collections.Specialized.NameValueCollection(); values.Add("wrap_name", "partialTrustConsumer"); //service identity name values.Add("wrap_password", "suCei7AzdXY9toVH+S47C4TVyXO/UUFzu0zZiSCp64Y="); //service identity password values.Add("wrap_scope", "http://sixeyed-ipasbr.servicebus.windows.net/"); //this is the realm of the RP in ACS var acsClient = new WebClient(); var responseBytes = acsClient.UploadValues("https://sixeyed-ipasbr-sb.accesscontrol.windows.net/WRAPv0.9/", "POST", values); rawToken = System.Text.Encoding.UTF8.GetString(responseBytes); With a little manipulation, we then attach the SWT to subsequent REST calls in the authorization header; the token contains the Send claim returned from ACS, so we will be authorized to send messages into Service Bus. Running the sample Navigate to http://localhost:2028/Sixeyed.Ipasbr.WebHttpClient/Default.cshtml, enter a string and hit Go! - your string will be reversed by your on-premise service, routed through Azure: Using shared secret client credentials in this way means ACS is the identity provider for your service, and the claim which allows Send access to Service Bus is consumed by Service Bus. None of the authentication details make it through to your service, so your service is not aware who the consumer is (MSDN calls this "anonymous authentication").

  Read the article

• CodePlex Daily Summary for Monday, May 26, 2014

  CodePlex Daily Summary for Monday, May 26, 2014Popular ReleasesClosedXML - The easy way to OpenXML: ClosedXML 0.71.1: More performance improvements. It's faster and consumes less memory.Role Based Views in Microsoft Dynamics CRM 2011: Role Based Views in CRM 2011 and 2013 - 1.1.0.0: Issues fixed in this build: 1. Works for CRM 2013 2. Lookup view not getting blockedSimCityPak: SimCityPak 0.3.1.0: Main New Features: Fixed Importing of Instance Names (get rid of the Dutch translations) Added advanced editor for Decal Dictionaries Added possibility to import .PNG to generate new decals Added advanced editor for Path display entriesSimple Connect To Db: SimpleConnectToDb_v1: SimpleConnectToDb_v1CRM 2011 / CRM 2013 Form Helper: v2014.05.25: v2014.05.25 Added PhoneFormat & PhoneFormatAreaCode v2014.05.24 Initial ReleaseCreate Word documents without MS Word: Release 3.0: Add support for Sections, Sections Headers and Footers and right to left languages.Corporate News App for SharePoint 2013: CorporateNewsApp v1.6.2.0: Important note This version contains a major bug fix about the generic error "Request failed. Unexpected response data from server null" This error occurs on SharePoint Online only, following an update of the Javascript API after May 2014. If you have installed this application manually in your applications company catalog, you can download the CorporateNewsApp.app file in the zip archive and update it manually. If you have installed this application directly from the SharePoint Store, it ...DevOS: DevOS: Plugin-system added Including:DevOS.exe DevOS API.dll Files must be in the some folderTiny Deduplicator: Tiny Deduplicator 1.0.1.0: Increased version number to 1.0.1.0 Moved all options to a separate 'Options' dialog window. Allows the user to specify a selection strategy which will help when dealing with large numbers of duplicate files. Available options are "None," "Keep First," and "Keep Last"C64 Studio: 3.5: Add: BASIC renumber function Add: !PET pseudo op Add: elseif for !if, } else { pseudo op Add: !TRACE pseudo op Add: Watches are saved/restored with a solution Add: Ctrl-A works now in export assembly controls Add: Preliminary graphic import dialog (not fully functional yet) Add: range and block selection in sprite/charset editor (Shift-Click = range, Alt-Click = block) Fix: Expression evaluator could miscalculate when both division and multiplication were in an expression without parenthesisSEToolbox: SEToolbox 01.031.009 Release 1: Added mirroring of ConveyorTubeCurved. Updated Ship cube rotation to rotate ship back to original location (cubes are reoriented but ship appears no different to outsider), and to rotate Grouped items. Repair now fixes the loss of Grouped controls due to changes in Space Engineers 01.030. Added export asteroids. Rejoin ships will merge grouping and conveyor systems (even though broken ships currently only maintain the Grouping on one part of the ship). Installation of this version wi...Player Framework by Microsoft: Player Framework for Windows and WP v2.0: Support for new Universal and Windows Phone 8.1 projects for both Xaml and JavaScript projects. See a detailed list of improvements, breaking changes and a general overview of version 2 ADDITIONAL DOWNLOADSSmooth Streaming Client SDK for Windows 8 Applications Smooth Streaming Client SDK for Windows 8.1 Applications Smooth Streaming Client SDK for Windows Phone 8.1 Applications Microsoft PlayReady Client SDK for Windows 8 Applications Microsoft PlayReady Client SDK for Windows 8.1 Applicat...TerraMap (Terraria World Map Viewer): TerraMap 1.0.6: Added support for the new Terraria v1.2.4 update. New items, walls, and tiles Added the ability to select multiple highlighted block types. Added a dynamic, interactive highlight opacity slider, making it easier to find highlighted tiles with dark colors (and fixed blurriness from 1.0.5 alpha). Added ability to find Enchanted Swords (in the stone) and Water Bolt books Fixed Issue 35206: Hightlight/Find doesn't work for Demon Altars Fixed finding Demon Hearts/Shadow Orbs Fixed inst...DotNet.Highcharts: DotNet.Highcharts 4.0 with Examples: DotNet.Highcharts 4.0 Tested and adapted to the latest version of Highcharts 4.0.1 Added new chart type: Heatmap Added new type PointPlacement which represents enumeration or number for the padding of the X axis. Changed target framework from .NET Framework 4 to .NET Framework 4.5. Closed issues: 974: Add 'overflow' property to PlotOptionsColumnDataLabels class 997: Split container from JS 1006: Series/Categories with numeric names don't render DotNet.Highcharts.Samples Updated s...ConEmu - Windows console with tabs: ConEmu 140523 [Alpha]: ConEmu - developer build x86 and x64 versions. Written in C++, no additional packages required. Run "ConEmu.exe" or "ConEmu64.exe". Some useful information you may found: http://superuser.com/questions/tagged/conemu http://code.google.com/p/conemu-maximus5/wiki/ConEmuFAQ http://code.google.com/p/conemu-maximus5/wiki/TableOfContents If you want to use ConEmu in portable mode, just create empty "ConEmu.xml" file near to "ConEmu.exe" Aspose for Apache POI: Missing Features of Apache POI SL - v 1.1: Release contain the Missing Features in Apache POI SL SDK in Comparison with Aspose.Slides for dealing with Microsoft Power Point. What's New ?Following Examples: Managing Slide Transitions Manage Smart Art Adding Media Player Adding Audio Frame to Slide Feedback and Suggestions Many more examples are yet to come here. Keep visiting us. Raise your queries and suggest more examples via Aspose Forums or via this social coding site.PowerShell App Deployment Toolkit: PowerShell App Deployment Toolkit v3.1.3: Added CompressLogs option to the config file. Each Install / Uninstall creates a timestamped zip file with all MSI and PSAppDeployToolkit logs contained within Added variable expansion to all paths in the configuration file Added documentation for each of the Toolkit internal variables that can be used Changed Install-MSUpdates to continue if any errors are encountered when installing updates Implement /Force parameter on Update-GroupPolicy (ensure that any logoff message is ignored) ...WordMat: WordMat v. 1.07: A quick fix because scientific notation was broken in v. 1.06 read more at http://wordmat.blogspot.com????: 《????》: 《????》（c???）??“????”???????，???????????????C?????????。???????,???????????????????????. ??????????????????????????????????；????????????????????????????。Mini SQL Query: Mini SQL Query (1.0.72.457): Apologies for the previous update! FK issue fixed and also a template data cache issue.New ProjectsASP.Net MCV4 Simplified Code Samples: This project intended to simplify the same. In this project each task is implemented with minimum lines of code to reduces complicity.Calvin: net???CodeLatino by Latinosoft: A Modified version for codeShow -- Probably taking more than a month.freeasyBackup: A free and easy to use Backup Tool for everyone. Without any cloud restrictions. freeasyExplorer: A free and easy to use File Explorer for everyone.openPDFspeedreader: #spritz #pdfreader #speedreader PDF Editor to Edit PDF Files in your ASP.NET Applications: This sample application allows the users to edit PDF files online using Aspose.Pdf for .NET.SharePoint World Cup 2013: world cup 2014SSAS Long Running Query Performance Helper: This utility helps investigate long running multidimensional or mining queries in discovery, de-parameterization and re-parameterization back to source format.

  Read the article

• Why does Google mark one e-mail as spam while does not the other?

  - by nKn

  I've a Postfix installation which works fine, I don't get any trouble with mails sent through a mail client (in my case, Thunderbird or RoundCube) when the To: address is a GMail account. However, I recently needed to use the PHPMailer tool to send some e-mails to some GMail accounts, so I configured an account to be used via SASL authentication + TLS. I don't mean mass mailing, just 2-3 mails. If I send the e-mail from the Thunderbird or RoundCube clients, the mail is not marked as spam. However, if I use PHPMailer, it always gets catalogued as spam. So I compared both headers and I just can't find the reason why the second is marked as spam while the first one is just ok. The first header sent from a mail client which is not marked as spam: Delivered-To: [email protected] Received: by 10.76.153.102 with SMTP id vf6csp230573oab; Tue, 19 Aug 2014 11:08:19 -0700 (PDT) X-Received: by 10.60.23.39 with SMTP id j7mr45544050oef.20.1408471699715; Tue, 19 Aug 2014 11:08:19 -0700 (PDT) Return-Path: <[email protected]> Received: from mail.mydomain.com (X.ip-92-222-X.eu. [92.222.X.X]) by mx.google.com with ESMTPS id t5si27115082oej.10.2014.08.19.11.08.18 for <[email protected]> (version=TLSv1.2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Tue, 19 Aug 2014 11:08:19 -0700 (PDT) Received-SPF: pass (google.com: domain of [email protected] designates 92.222.X.X as permitted sender) client-ip=92.222.X.X; Authentication-Results: mx.google.com; spf=pass (google.com: domain of [email protected] designates 92.222.X.X as permitted sender) [email protected]; dkim=pass (test mode) [email protected] Received: by mail.mydomain.com (Postfix, from userid 111) id D8F69120293D; Tue, 19 Aug 2014 19:08:17 +0100 (BST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=mydomain.com; s=mail; t=1408471697; bh=wKMX9gkQ7tCLv8ezrG5t4bICm/SSLQsNfTdZMToksWw=; h=Date:From:To:Subject:From; b=qRNcYVdmk+n3D1uuv0FInTx7/LzH2ojck9DgCmabFPvfke233lkojUOjezCUGx7iV DL8EayZ28mzzzHpB7ETeMzop/5OS3BmvFtGKVD9gzc78cDIFXTDoRFAnkRWDR2IOxI SOn5tiyODTFpkbDgJOndzQ6qL5K0S9ASNGCZrNL4= X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on vpsX.ovh.net X-Spam-Level: X-Spam-Status: No, score=-1.0 required=3.0 tests=ALL_TRUSTED,T_DKIM_INVALID autolearn=ham autolearn_force=no version=3.4.0 Received: from [192.168.1.111] (unknown [77.231.X.X]) (using TLSv1 with cipher ECDHE-RSA-AES128-SHA (128/128 bits)) (No client certificate requested) (Authenticated sender: [email protected]) by mail.mydomain.com (Postfix) with ESMTPSA id 910341202624 for <[email protected]>; Tue, 19 Aug 2014 19:08:17 +0100 (BST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=mydomain.com; s=mail; t=1408471697; bh=wKMX9gkQ7tCLv8ezrG5t4bICm/SSLQsNfTdZMToksWw=; h=Date:From:To:Subject:From; b=qRNcYVdmk+n3D1uuv0FInTx7/LzH2ojck9DgCmabFPvfke233lkojUOjezCUGx7iV DL8EayZ28mzzzHpB7ETeMzop/5OS3BmvFtGKVD9gzc78cDIFXTDoRFAnkRWDR2IOxI SOn5tiyODTFpkbDgJOndzQ6qL5K0S9ASNGCZrNL4= Message-ID: <[email protected]> Date: Tue, 19 Aug 2014 19:08:24 +0100 From: My Name <[email protected]> User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:24.0) Gecko/20100101 Thunderbird/24.6.0 MIME-Version: 1.0 To: My other account <[email protected]> Subject: . Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit . The second header sent from PHPMailer which is always marked as spam: Delivered-To: [email protected] Received: by 10.76.153.102 with SMTP id vf6csp230832oab; Tue, 19 Aug 2014 11:12:10 -0700 (PDT) X-Received: by 10.60.121.67 with SMTP id li3mr44086252oeb.17.1408471930520; Tue, 19 Aug 2014 11:12:10 -0700 (PDT) Return-Path: <[email protected]> Received: from mail.mydomain.com (X.ip-92-222-X.eu. [92.222.X.X]) by mx.google.com with ESMTPS id w8si27103806obn.30.2014.08.19.11.12.10 for <[email protected]> (version=TLSv1.2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Tue, 19 Aug 2014 11:12:10 -0700 (PDT) Received-SPF: pass (google.com: domain of [email protected] designates 92.222.X.X as permitted sender) client-ip=92.222.X.X; Authentication-Results: mx.google.com; spf=pass (google.com: domain of [email protected] designates 92.222.X.X as permitted sender) [email protected]; dkim=pass (test mode) [email protected] Received: by mail.mydomain.com (Postfix, from userid 111) id 1999D120293D; Tue, 19 Aug 2014 19:12:09 +0100 (BST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=mydomain.com; s=mail; t=1408471929; bh=N1JuHq1S+8GrjHcEK3xn8P1JS+ygEBv5LKe0BiXuVJo=; h=Date:To:From:Reply-to:Subject:From; b=K7tcPyArzSTY91VEw6mAAFtDurSGwgTLGkfUZdC5mqsg0g/1LzmZkgwdjj4NdJa6M E2kDz3dwYN8FcZmbampJYFXxj4NQVtSnzjiWV40rpfOFqD2rXDGNIyB2QOjBZZ4WK3 7s4lyoJ/BrdQH4en8ctLVsDHed/KpHD4iGFEl67E= X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on vpsX.ovh.net X-Spam-Level: X-Spam-Status: No, score=-1.0 required=3.0 tests=ALL_TRUSTED,T_DKIM_INVALID autolearn=ham autolearn_force=no version=3.4.0 Received: from rpi.mydomain.com (unknown [77.231.X.X]) (using TLSv1 with cipher ECDHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) (Authenticated sender: [email protected]) by mail.mydomain.com (Postfix) with ESMTPSA id B42AF1202624 for <[email protected]>; Tue, 19 Aug 2014 19:12:08 +0100 (BST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=mydomain.com; s=mail; t=1408471928; bh=N1JuHq1S+8GrjHcEK3xn8P1JS+ygEBv5LKe0BiXuVJo=; h=Date:To:From:Reply-to:Subject:From; b=iXPM0tS36swudPTT4FOHHtPi5Ll6LbR60kNqCinZ8utcWoFE31SFTpoMEq5aCM5ux wQMdFiN8c6vkjRGabmvqFTTIbwJsrToHo/4+Lt5HEBoQQE2Y3T+xGmnmGAHCS6stKB yb7SVmtrIAsVtSMKA8VYIbmu2oYqV3afYt7g0OMQ= Date: Tue, 19 Aug 2014 20:12:07 +0200 To: [email protected] From: Trying another account <[email protected]> Reply-to: Trying another account <[email protected]> Subject: . Message-ID: <[email protected]> X-Priority: 3 X-Mailer: PHPMailer 5.1 (phpmailer.sourceforge.net) MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Content-Type: text/plain; charset="UTF-8" . I also tried: Adding a User-Agent header to match the first one. Removing the X-Mailer header. No one of them made a difference. Is there some significant difference which is making the second e-mail to be marked as spam by Google?

  Read the article

• Visual Studio 2010 Productivity Tips and Tricks&ndash;Part 1: Extensions

  - by ToStringTheory

  I don’t know about you, but when it comes to development, I prefer my environment to be as free of clutter as possible.  It may surprise you to know that I have tried ReSharper, and did not like it, for the reason that I stated above.  In my opinion, it had too much clutter.  Don’t get me wrong, there were a couple of features that I did like about it (inversion of if blocks, code feedback), but for the most part, I actually felt that it was slowing me down. Introduction Another large factor besides intrusiveness/speed in my choice to dislike ReSharper would probably be that I have become comfortable with my current setup and extensions.  I believe I have a good collection, and am quite happy with what I can accomplish in a short amount of time.  I figured that I would share some of my tips/findings regarding Visual Studio productivity here, and see what you had to say. The first section of things that I would like to cover, are Visual Studio Extensions.  In case you have been living under a rock for the past several years, Extensions are available under the Tools menu in Visual Studio: The extension manager enables integrated access to the Microsoft Visual Studio Gallery online with access to a few thousand different extensions.  I have tried many extensions, but for reasons of lack reliability, usability, or features, have uninstalled almost all of them.  However, I have come across several that I find I can not do without anymore: NuGet Package Manager (Microsoft) Perspectives (Adam Driscoll) Productivity Power Tools (Microsoft) Web Essentials (Mads Kristensen) Extensions NuGet Package Manager To be honest, I debated on whether or not to put this in here.  Most people seem to have it, however, there was a time when I didn’t, and was always confused when blogs/posts would say to right click and “Add Package Reference…” which with one of the latest updates is now “Manage NuGet Packages”.  So, if you haven’t downloaded the NuGet Package Manager yet, or don’t know what it is, I would highly suggest downloading it now! Features Simply put, the NuGet Package Manager gives you a GUI and command line to access different libraries that have been uploaded to NuGet. Some of its features include: Ability to search NuGet for packages via the GUI, with information in the detail bar on the right. Quick access to see what packages are in a solution, and what packages have updates available, with easy 1-click updating. If you download a package that requires references to work on other NuGet packages, they will be downloaded and referenced automatically. Productivity Tip If you use any type of source control in Visual Studio as well as using NuGet packages, be sure to right-click on the solution and click "Enable NuGet Package Restore". What this does is add a NuGet package to the solution so that it will be checked in along side your solution, as well as automatically grab packages from NuGet on build if needed. This is an extremely simple system to use to manage your package references, instead of having to manually go into TFS and add the Packages folder. Perspectives I can't stand developing with just one monitor. Especially if it comes to debugging. The great thing about Visual Studio 2010, is that all of the panels and windows are floatable, and can dock to other screens. The only bad thing is, I don't use the same toolset with everything that I am doing. By this, I mean that I don't use all of the same windows for debugging a web application, as I do for coding a WPF application. Only thing is, Visual Studio doesn't save the screen positions for all of the undocked windows. So, I got curious one day and decided to check and see if there was an extension to help out. This is where I found Perspectives. Features Perspectives gives you the ability to configure window positions across any or your monitors, and then to save the positions in a profile. Perspectives offers a Panel to manage different presets/favorites, and a toolbar to add to the toolbars at the top of Visual Studio. Ability to 'Favorite' a profile to add it to the perspectives toolbar. Productivity Tip Take the time to setup profiles for each of your scenarios - debugging web/winforms/xaml, coding, maintenance, etc. Try to remember to use the profiles for a few days, and at the end of a week, you may find that your productivity was never better. Productivity Power Tools Ah, the Productivity Power Tools... Quite possibly one of my most used extensions, if not my most used. The tool pack gives you a variety of enhancements ranging from key shortcuts, interface tweaks, and completely new features to Visual Studio 2010. Features I don't want to bore you with all of the features here, so here are my favorite: Quick Find - Unobtrusive search box in upper-right corner of the code window. Great for searching in general, especially in a file. Solution Navigator - The 'Solution Explorer' on steroids. Easy to search for files, see defined members/properties/methods in files, and my favorite feature is the 'set as root' option. Updated 'Add Reference...' Dialog - This is probably my favorite enhancement period... The 'Add Reference...' dialog redone in a manner that resembles the Extension/Package managers. I especially love the ability to search through all of the references. "Ctrl - Click" for Definition - I am still getting used to this as I usually try to use my keyboard for everything, but I love the ability to hold Ctrl and turn property/methods/variables into hyperlinks, that you click on to see their definitions. Great for travelling down a rabbit hole in an application to research problems. While there are other commands/utilities, I find these to be the ones that I lean on the most for the usefulness. Web Essentials If you have do any type of web development in ASP .Net, ASP .Net MVC, even HTML, I highly suggest grabbing the Web Essentials right NOW! This extension alone is great for productivity in web development, and greatly decreases my development time on new features. Features Some of its best features include: CSS Previews - I say 'previews' because of the multiple kinds of previews in CSS that you get font-family, color, background/background-image previews. This is great for just tweaking UI slightly in different ways and seeing how they look in the CSS window at a glance. Live Preview - One word - awesome! This goes well with my multi-monitor setup. I put the site on one monitor in a Live Preview panel, and then as I make changes to CSS/cshtml/aspx/html, the preview window will update with each save/build automatically. For CSS, you can even turn on live-update, so as you are tweaking CSS, the style changes in real time. Great for tweaking colors or font-sizes. Outlining - Small, but I like to be able to collapse regions/declarations that are in the way of new work, or are just distracting. Commenting Shortcuts - I don't know why it wasn't included by default, but it is nice to have the key shortcuts for commenting working in the CSS editor as well. Productivity Tip When working on a site, hit CTRL-ALT-ENTER to launch the Live Preview window. Dock it to another monitor. When you make changes to the document/css, just save and glance at the other monitor. No need to alt tab, then alt tab before continuing editing. Conclusion These extensions are only the most useful and least intrusive - ones that I use every day. The great thing about Visual Studio 2010 is the extensibility options that it gives developers to utilize. Have an extension that you use that isn't intrusive, but isn't listed here? Please, feel free to comment. I love trying new things, and am always looking for new additions to my toolset of the most useful. Finally, please keep an eye out for Part 2 on key shortcuts in Visual Studio. Also, if you are visiting my site (http://tostringtheory.com || http://geekswithblogs.net/tostringtheory) from an actual browser and not a feed, please let me know what you think of the new styling!

  Read the article

• UV Atlas Generation and Seam Removal

  - by P. Avery

  I'm generating light maps for scene mesh objects using DirectX's UV Atlas Tool( D3DXUVAtlasCreate() ). I've succeeded in generating an atlas, however, when I try to render the mesh object using the atlas the seams are visible on the mesh. Below are images of a lightmap generated for a cube. Here is the code I use to generate a uv atlas for a cube: struct sVertexPosNormTex { D3DXVECTOR3 vPos, vNorm; D3DXVECTOR2 vUV; sVertexPosNormTex(){} sVertexPosNormTex( D3DXVECTOR3 v, D3DXVECTOR3 n, D3DXVECTOR2 uv ) { vPos = v; vNorm = n; vUV = uv; } ~sVertexPosNormTex() { } }; // create a light map texture to fill programatically hr = D3DXCreateTexture( pd3dDevice, 128, 128, 1, 0, D3DFMT_A8R8G8B8, D3DPOOL_MANAGED, &pLightmap ); if( FAILED( hr ) ) { DebugStringDX( "Main", "Failed to D3DXCreateTexture( lightmap )", __LINE__, hr ); return hr; } // get the zero level surface from the texture IDirect3DSurface9 *pS = NULL; pLightmap->GetSurfaceLevel( 0, &pS ); // clear surface pd3dDevice->ColorFill( pS, NULL, D3DCOLOR_XRGB( 0, 0, 0 ) ); // load a sample mesh DWORD dwcMaterials = 0; LPD3DXBUFFER pMaterialBuffer = NULL; V_RETURN( D3DXLoadMeshFromX( L"cube3.x", D3DXMESH_MANAGED, pd3dDevice, &pAdjacency, &pMaterialBuffer, NULL, &dwcMaterials, &g_pMesh ) ); // generate adjacency DWORD *pdwAdjacency = new DWORD[ 3 * g_pMesh->GetNumFaces() ]; g_pMesh->GenerateAdjacency( 1e-6f, pdwAdjacency ); // create light map coordinates LPD3DXMESH pMesh = NULL; LPD3DXBUFFER pFacePartitioning = NULL, pVertexRemapArray = NULL; FLOAT resultStretch = 0; UINT numCharts = 0; hr = D3DXUVAtlasCreate( g_pMesh, 0, 0, 128, 128, 3.5f, 0, pdwAdjacency, NULL, NULL, NULL, NULL, NULL, 0, &pMesh, &pFacePartitioning, &pVertexRemapArray, &resultStretch, &numCharts ); if( SUCCEEDED( hr ) ) { // release and set mesh SAFE_RELEASE( g_pMesh ); g_pMesh = pMesh; // write mesh to file hr = D3DXSaveMeshToX( L"cube4.x", g_pMesh, 0, ( const D3DXMATERIAL* )pMaterialBuffer->GetBufferPointer(), NULL, dwcMaterials, D3DXF_FILEFORMAT_TEXT ); if( FAILED( hr ) ) { DebugStringDX( "Main", "Failed to D3DXSaveMeshToX() at OnD3D9CreateDevice()", __LINE__, hr ); } // fill the the light map hr = BuildLightmap( pS, g_pMesh ); if( FAILED( hr ) ) { DebugStringDX( "Main", "Failed to BuildLightmap()", __LINE__, hr ); } } else { DebugStringDX( "Main", "Failed to D3DXUVAtlasCreate() at OnD3D9CreateDevice()", __LINE__, hr ); } SAFE_RELEASE( pS ); SAFE_DELETE_ARRAY( pdwAdjacency ); SAFE_RELEASE( pFacePartitioning ); SAFE_RELEASE( pVertexRemapArray ); SAFE_RELEASE( pMaterialBuffer ); Here is code to fill lightmap texture: HRESULT BuildLightmap( IDirect3DSurface9 *pS, LPD3DXMESH pMesh ) { HRESULT hr = S_OK; // validate lightmap texture surface and mesh if( !pS || !pMesh ) return E_POINTER; // lock the mesh vertex buffer sVertexPosNormTex *pV = NULL; pMesh->LockVertexBuffer( D3DLOCK_READONLY, ( void** )&pV ); // lock the mesh index buffer WORD *pI = NULL; pMesh->LockIndexBuffer( D3DLOCK_READONLY, ( void** )&pI ); // get the lightmap texture surface description D3DSURFACE_DESC desc; pS->GetDesc( &desc ); // lock the surface rect to fill with color data D3DLOCKED_RECT rct; hr = pS->LockRect( &rct, NULL, 0 ); if( FAILED( hr ) ) { DebugStringDX( "main.cpp:", "Failed to IDirect3DTexture9::LockRect()", __LINE__, hr ); return hr; } // iterate the pixels of the lightmap texture // check each pixel to see if it lies between the uv coordinates of a cube face BYTE *pBuffer = ( BYTE* )rct.pBits; for( UINT y = 0; y < desc.Height; ++y ) { BYTE* pBufferRow = ( BYTE* )pBuffer; for( UINT x = 0; x < desc.Width * 4; x+=4 ) { // determine the pixel's uv coordinate D3DXVECTOR2 p( ( ( float )x / 4.0f ) / ( float )desc.Width + 0.5f / 128.0f, y / ( float )desc.Height + 0.5f / 128.0f ); // for each face of the mesh // check to see if the pixel lies within the face's uv coordinates for( UINT i = 0; i < 3 * pMesh->GetNumFaces(); i +=3 ) { sVertexPosNormTex v[ 3 ]; v[ 0 ] = pV[ pI[ i + 0 ] ]; v[ 1 ] = pV[ pI[ i + 1 ] ]; v[ 2 ] = pV[ pI[ i + 2 ] ]; if( TexcoordIsWithinBounds( v[ 0 ].vUV, v[ 1 ].vUV, v[ 2 ].vUV, p ) ) { // the pixel lies b/t the uv coordinates of a cube face // light contribution functions aren't needed yet //D3DXVECTOR3 vPos = TexcoordToPos( v[ 0 ].vPos, v[ 1 ].vPos, v[ 2 ].vPos, v[ 0 ].vUV, v[ 1 ].vUV, v[ 2 ].vUV, p ); //D3DXVECTOR3 vNormal = v[ 0 ].vNorm; // set the color of this pixel red( for demo ) BYTE ba[] = { 0, 0, 255, 255, }; //ComputeContribution( vPos, vNormal, g_sLight, ba ); // copy the byte array into the light map texture memcpy( ( void* )&pBufferRow[ x ], ( void* )ba, 4 * sizeof( BYTE ) ); } } } // go to next line of the texture pBuffer += rct.Pitch; } // unlock the surface rect pS->UnlockRect(); // unlock mesh vertex and index buffers pMesh->UnlockIndexBuffer(); pMesh->UnlockVertexBuffer(); // write the surface to file hr = D3DXSaveSurfaceToFile( L"LightMap.jpg", D3DXIFF_JPG, pS, NULL, NULL ); if( FAILED( hr ) ) DebugStringDX( "Main.cpp", "Failed to D3DXSaveSurfaceToFile()", __LINE__, hr ); return hr; } bool TexcoordIsWithinBounds( const D3DXVECTOR2 &t0, const D3DXVECTOR2 &t1, const D3DXVECTOR2 &t2, const D3DXVECTOR2 &p ) { // compute vectors D3DXVECTOR2 v0 = t1 - t0, v1 = t2 - t0, v2 = p - t0; float f00 = D3DXVec2Dot( &v0, &v0 ); float f01 = D3DXVec2Dot( &v0, &v1 ); float f02 = D3DXVec2Dot( &v0, &v2 ); float f11 = D3DXVec2Dot( &v1, &v1 ); float f12 = D3DXVec2Dot( &v1, &v2 ); // Compute barycentric coordinates float invDenom = 1 / ( f00 * f11 - f01 * f01 ); float fU = ( f11 * f02 - f01 * f12 ) * invDenom; float fV = ( f00 * f12 - f01 * f02 ) * invDenom; // Check if point is in triangle if( ( fU >= 0 ) && ( fV >= 0 ) && ( fU + fV < 1 ) ) return true; return false; } Screenshot Lightmap I believe the problem comes from the difference between the lightmap uv coordinates and the pixel center coordinates...for example, here are the lightmap uv coordinates( generated by D3DXUVAtlasCreate() ) for a specific face( tri ) within the mesh, keep in mind that I'm using the mesh uv coordinates to write the pixels for the texture: v[ 0 ].uv = D3DXVECTOR2( 0.003581, 0.295631 ); v[ 1 ].uv = D3DXVECTOR2( 0.003581, 0.003581 ); v[ 2 ].uv = D3DXVECTOR2( 0.295631, 0.003581 ); the lightmap texture size is 128 x 128 pixels. The upper-left pixel center coordinates are: float halfPixel = 0.5 / 128 = 0.00390625; D3DXVECTOR2 pixelCenter = D3DXVECTOR2( halfPixel, halfPixel ); will the mapping and sampling of the lightmap texture will require that an offset be taken into account or that the uv coordinates are snapped to the pixel centers..? ...Any ideas on the best way to approach this situation would be appreciated...What are the common practices?

  Read the article

• Delivering the Integrated Portal Experience!

  - by Michael Snow

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Guest post by Richard Maldonado, Principal Product Manager, Oracle WebCenter Portal Organizations are still struggling to standardize on a user interaction platform which can meet the needs of all their target audiences.  This has not only resulted in inefficient and inconsistent experiences for their users, but it also creates inefficiencies (productivity and costs) for the departments that manage the applications and information systems.  Portals have historically been the unifying platform that provide IT with a common interface which can securely surface the most relevant interactions for a given user and/or group of users.  However, organizations have found that the technologies available have either not provided the flexibility necessary to address all of their use cases, or they rely too much on IT resources to manage, maintain, and evolve.  Empowering  the Business Groups The core issue that IT departments face with delivering portal experiences is having enough resources to respond and address the influx of requirements which come in from the business.  Commonly, when a business group wants a new portal site established for their group, they will submit a request to the IT dept, the IT dept then assigns a resource to an administrator and/or developer to build.  Unfortunately, this approach is not scalable, it can be a time consuming activity which requires significant interaction between the business owner and the IT resource.  A modern user interaction platforms should empower the business groups by providing them tools which they can use to build and manage the portal experiences without the need for IT's involvement.  And because business groups rarely have technical resources (developers) on staff, the tools must be easy enough that virtually any business user could use.  In addition, the tool must be powerful enough to allow them to build the experience that they need, things such as creating a whole new portal, add/manage page and page hierarchy, manage user/group access, add/modify components within the page, etc.  This balance between ease-of-use and flexibility is key to the successful adoption of tools which will ultimately reduce the burden on IT, respond to the needs of the business, and deliver high-value experiences for the users.  Ready or Not, Here They Come: Smartphones and Tablets Recently, several studies have highlighted that smartphone and tablet-style devices have overtaken PC's in both sales and usage.  This shift is further driving organizations to revaluate how they're delivering data, information, and applications to their users.  Users are expecting to get the same level of access and interaction, but in a ways which are optimized for the capabilities of the device that they are using.  Expect More With the ever growing number of new IT projects and flat/shrinking budgets, organizations are looking for comprehensive solutions which can deliver integrated web experiences that are tailored for the users and optimized for mobile devices.  Piecing together a number of point solutions is no longer an option.  A modern portal technology should not only address the traditional needs of integrating and surfacing back-end applications/information, but it should enable the business through easy-to-use tools and accelerate the delivery of mobile optimized experiences.   v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} 12.00 Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} 12.00 Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} WebCenter in Action Series: Qualcomm Provides a Seamless Experience for Customers with Oracle WebCenter Featuring Qualcomm & Keste 12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 -"/ /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:Calibri; mso-fareast-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} 12.00 Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-fareast- mso-bidi-font-family:"Times New Roman";}

  Read the article

• CodePlex Daily Summary for Monday, September 03, 2012

  CodePlex Daily Summary for Monday, September 03, 2012Popular ReleasesMetodología General Ajustada - MGA: 03.01.03: Cambios Aury: Ajuste del margen del reporte. Visualización de la columna de Supuestos en la parte del módulo de Decisión. Cambios John: Integración de código con cambios enviados por Aury Niño. Generación de instaladores. Soporte técnico por correo electrónico y telefónico.Iveely Search Engine: Iveely Search Engine （0.2.0）: ????ISE?0.1.0??，?????，ISE?0.2.0?????????，???????，????????20???follow?ISE，????，??ISE??????????，??????????，?????????，?????????0.2.0??????，??????????。 Iveely Search Engine ?0.2.0?????????“??????????”，??????，?????????，???????，???????????????????，????、????????????。???0.1.0????????????： 1. ??“????” ??。??????????，?????????，???????????????????。??：????????，????????????，??????????????????。??????。 2. ??“????”??。?0.1.0??????，???????，???????????????，?????????????，????????，?0.2.0?，???????...Thisismyusername's codeplex page.: HTML5 Mulititouch Fruit Ninja Proof of Concept: This is an example of how you could create a game such as Fruit Ninja using HTML5's multitouch capabilities. Sorry this example doesn't have great graphics. If I had my own webpage, I could store some graphics and upload the game there and it might look halfway decent, but since I'm only using a Codeplex page and most mobile devices can't open .zip files, the fruits are just circles. I hope you enjoy reading the source code anyway.GmailDefaultMaker: GmailDefaultMaker 3.0.0.2: Add QQ Mail BugfixSmart Data Access layer: Smart Data access Layer Ver 3: In this version support executing inline query is added. Check Documentation section for detail.TSQL Code Smells Finder: POC 1.01: Proof of concept 1.01 TSQLDomTest.ps1 and Errors.Txt are requiredConfuser: Confuser build 76542: This is a build of changeset 76542.Reactive State Machine: ReactiveStateMachine-beta: TouchStateMachine now supports Microsoft Surface 2.0 SDK. The TouchStateMachine is an extension to the Reactive State Machine. Reactive State Machine uses NuGet for dependency managementSharePoint Column & View Permission: SharePoint Column and View Permission v1.2: Version 1.2 of this project. If you will find any bugs please let me know at enti@zoznam.sk or post your findings in Issue TrackerMihmojsos OS: Mihmojsos OS 3 (Smart Rabbit): !Mihmojsos OS 3 Smart Rabbit Mihmojsos Smart Rabbit is now availableDotNetNuke Translator: 01.00.00 Beta: First release of the project.YNA: YNA 0.2 alpha: Wath's new since 0.1 alpha ? A lot of changes but there are the most interresting : StateManager is now better and faster Mouse events for all YnObjects (Sprites, Images, texts) A really big improvement for YnGroup Gamepad support And the news : Tiled Map support (need refactoring) Isometric tiled map support (need refactoring) Transition effect like "FadeIn" and "FadeOut" (YnTransition) Timers (YnTimer) Path management (YnPath, need more refactoring) Downloads All downloads...Audio Pitch & Shift: Audio Pitch And Shift 5.1.0.2: fixed several issues with streaming modeUrlPager: UrlPager 1.2: Fixed bug in which url parameters will lost after paging; ????????url???bug；Sofire Suite: Sofire v1.5.0.0: Sofire v1.5.0.0 ?? ???????? ?????： 1、?? 2、????EntLib.com????????: EntLib.com???????? v3.0: EntLib eCommerce Solution ???Microsoft .Net Framework?????????????????????。Coevery - Free CRM: Coevery 1.0.0.24: Add a sample database, and installation instructions.Math.NET Numerics: Math.NET Numerics v2.2.1: Major linear algebra rework since v2.1, now available on Codeplex as well (previous versions were only available via NuGet). Since v2.2.0: Student-T density more robust for very large degrees of freedom Sparse Kronecker product much more efficient (now leverages sparsity) Direct access to raw matrix storage implementations for advanced extensibility Now also separate package for signed core library with a strong name (we dropped strong names in v2.2.0) Also available as NuGet packages...Microsoft SQL Server Product Samples: Database: AdventureWorks Databases – 2012, 2008R2 and 2008: About this release This release consolidates AdventureWorks databases for SQL Server 2012, 2008R2 and 2008 versions to one page. Each zip file contains an mdf database file and ldf log file. This should make it easier to find and download AdventureWorks databases since all OLTP versions are on one page. There are no database schema changes. For each release of the product, there is a light-weight and full version of the AdventureWorks sample database. The light-weight version is denoted by ...Christoc's DotNetNuke Module Development Template: DotNetNuke Project Templates V1.1 for VS2012: This release is specifically for Visual Studio 2012 Support, distributed through the Visual Studio Extensions gallery at http://visualstudiogallery.msdn.microsoft.com/ After you build in Release mode the installable packages (source/install) can be found in the INSTALL folder now, within your module's folder, not the packages folder anymore Check out the blog post for all of the details about this release. http://www.dotnetnuke.com/Resources/Blogs/EntryId/3471/New-Visual-Studio-2012-Projec...New ProjectsBPVote4PPT: BPVote For PowerPointCosmo OS: La semplicità in un OSFinancial Analytic Tools: C#.Net Financial Analytic ToolsGeminiMVC: An Open Source CMS written in ASP.net MVC 4 with speed, extensibility, and ease-of-us in mind.JQuery SharePoint Autocomplete People Picker: This JQUery bundle provides an autocomplete people picker based on SharePoint profiles. It can be hosted on the SharePoint itself or on remote applications.Kerbal Space Program PartModule Library: This project is designed to add various functionalities to custom parts for the space program simulation game Kerbal Space Program.KeyboardRemapper: This tool to remaps keys in the keyboard. If you have more than one keyboard or an additional keypad, you can remap the keys of the each keyboard independentlyKHStudent: ??????Localized DataAnnotations with T4 templates: Simplified DataAnnotations localization using T4 templates.MfcLightToolkit: Supports development for small and simple MFC application. Provides asynchronous programming model like .NET, file download, easy control resizing, and so on.Müslüm ÖZTÜRK Code Lib: Test amaçli olusturulan projemdirPolska: Testproject in how a polish grammerprogram can look like.QueueLessApp: Here is the codeRusIS.CMS: aaaSGPS: Projeto de controle de produtos e serviçosStemmersNet: Stemmers pack for .Net FrameworkTrabajo Final de Ingenieria - Javier Vallejos: Tesis Final de la carrera de Ingenieria - Universidad Abierta Interamericana.TSQL Code Smells Finder: TSQL 'smells' findersXNA and Data Driven Design: This project includes links for XNA and Data Driven DesignXNA and System Testing: This project includes code for XNA and System TestingYUGI-AR Project: an open source project for yugioh based augmented reality???????? ? ?????????????: ???? ??????? ??????? ?????????????? ??????????? ?????????? ??? ? ????? ?????? ? ? ??? ??? ????? ? ??? ?????????? ????????????.

  Read the article

• Building an OpenStack Cloud for Solaris Engineering, Part 1

  - by Dave Miner

  One of the signature features of the recently-released Solaris 11.2 is the OpenStack cloud computing platform.  Over on the Solaris OpenStack blog the development team is publishing lots of details about our version of OpenStack Havana as well as some tips on specific features, and I highly recommend reading those to get a feel for how we've leveraged Solaris's features to build a top-notch cloud platform.  In this and some subsequent posts I'm going to look at it from a different perspective, which is that of the enterprise administrator deploying an OpenStack cloud.  But this won't be just a theoretical perspective: I've spent the past several months putting together a deployment of OpenStack for use by the Solaris engineering organization, and now that it's in production we'll share how we built it and what we've learned so far.In the Solaris engineering organization we've long had dedicated lab systems dispersed among our various sites and a home-grown reservation tool for developers to reserve those systems; various teams also have private systems for specific testing purposes.  But as a developer, it can still be difficult to find systems you need, especially since most Solaris changes require testing on both SPARC and x86 systems before they can be integrated.  We've added virtual resources over the years as well in the form of LDOMs and zones (both traditional non-global zones and the new kernel zones).  Fundamentally, though, these were all still deployed in the same model: our overworked lab administrators set up pre-configured resources and we then reserve them.  Sounds like pretty much every traditional IT shop, right?  Which means that there's a lot of opportunity for efficiencies from greater use of virtualization and the self-service style of cloud computing.  As we were well into development of OpenStack on Solaris, I was recruited to figure out how we could deploy it to both provide more (and more efficient) development and test resources for the organization as well as a test environment for Solaris OpenStack.At this point, let's acknowledge one fact: deploying OpenStack is hard.  It's a very complex piece of software that makes use of sophisticated networking features and runs as a ton of service daemons with myriad configuration files.  The web UI, Horizon, doesn't often do a good job of providing detailed errors.  Even the command-line clients are not as transparent as you'd like, though at least you can turn on verbose and debug messaging and often get some clues as to what to look for, though it helps if you're good at reading JSON structure dumps.  I'd already learned all of this in doing a single-system Grizzly-on-Linux deployment for the development team to reference when they were getting started so I at least came to this job with some appreciation for what I was taking on.  The good news is that both we and the community have done a lot to make deployment much easier in the last year; probably the easiest approach is to download the OpenStack Unified Archive from OTN to get your hands on a single-system demonstration environment.  I highly recommend getting started with something like it to get some understanding of OpenStack before you embark on a more complex deployment.  For some situations, it may in fact be all you ever need.  If so, you don't need to read the rest of this series of posts!In the Solaris engineering case, we need a lot more horsepower than a single-system cloud can provide.  We need to support both SPARC and x86 VM's, and we have hundreds of developers so we want to be able to scale to support thousands of VM's, though we're going to build to that scale over time, not immediately.  We also want to be able to test both Solaris 11 updates and a release such as Solaris 12 that's under development so that we can work out any upgrade issues before release.  One thing we don't have is a requirement for extremely high availability, at least at this point.  We surely don't want a lot of down time, but we can tolerate scheduled outages and brief (as in an hour or so) unscheduled ones.  Thus I didn't need to spend effort on trying to get high availability everywhere.The diagram below shows our initial deployment design.  We're using six systems, most of which are x86 because we had more of those immediately available.  All of those systems reside on a management VLAN and are connected with a two-way link aggregation of 1 Gb links (we don't yet have 10 Gb switching infrastructure in place, but we'll get there).  A separate VLAN provides "public" (as in connected to the rest of Oracle's internal network) addresses, while we use VxLANs for the tenant networks. One system is more or less the control node, providing the MySQL database, RabbitMQ, Keystone, and the Nova API and scheduler as well as the Horizon console.  We're curious how this will perform and I anticipate eventually splitting at least the database off to another node to help simplify upgrades, but at our present scale this works.I had a couple of systems with lots of disk space, one of which was already configured as the Automated Installation server for the lab, so it's just providing the Glance image repository for OpenStack.  The other node with lots of disks provides Cinder block storage service; we also have a ZFS Storage Appliance that will help back-end Cinder in the near future, I just haven't had time to get it configured in yet.There's a separate system for Neutron, which is our Elastic Virtual Switch controller and handles the routing and NAT for the guests.  We don't have any need for firewalling in this deployment so we're not doing so.  We presently have only two tenants defined, one for the Solaris organization that's funding this cloud, and a separate tenant for other Oracle organizations that would like to try out OpenStack on Solaris.  Each tenant has one VxLAN defined initially, but we can of course add more.  Right now we have just a single /24 network for the floating IP's, once we get demand up to where we need more then we'll add them.Finally, we have started with just two compute nodes; one is an x86 system, the other is an LDOM on a SPARC T5-2.  We'll be adding more when demand reaches the level where we need them, but as we're still ramping up the user base it's less work to manage fewer nodes until then.My next post will delve into the details of building this OpenStack cloud's infrastructure, including how we're using various Solaris features such as Automated Installation, IPS packaging, SMF, and Puppet to deploy and manage the nodes.  After that we'll get into the specifics of configuring and running OpenStack itself.

  Read the article

• Alcatel-Lucent: Enterprise 2.0: The Top 5 Things I would Do Over

  - by Kellsey Ruppel

  Happy Monday! Does anyone else feel as if the weekend went entirely too quickly? At least for those of us in the United States, we have the 4th of July Holiday next week to look forward to This week on the blog, we are going to focus on "WebCenter by Example" and highlight best practices from customers and partners. I recently came across this article and I think this is a great example of how we can learn from one another when it comes to social collaboration adoption. Do you agree with Jem? What things or best practices have you learned in your organizations?  By Jem Janik, Enterprise community manager, Alcatel-Lucent  Not so long ago, Engage, the Alcatel-Lucent employee social network and collaboration platform, celebrated its third birthday. With more than 25,000 members actively interacting each month, Engage has been a big enough success that it’s been the subject of external articles, and often those of us who helped launch it will go out and speak about what aspects contributed to that success. Hindsight is still 20/20 and what it takes to successfully launch an enterprise 2.0 community is fairly well-known now.  Today I want to tell you what I suspect you really want to know about.  As the enterprise community manager for Engage, after three years in, what are the top 5 things I wish we (and I mostly mean me) could do over? #5 Define your analytics solution from the start There is so much to do when you launch a community and initially growing it without complete chaos is quite a task.  It doesn’t take too long to get to a point where you want to focus your continued efforts in growing company collaboration.  Do people truly talk across regional boundaries or have we shifted siloed conversations to a new platform.  Is there one organization that doesn’t interact with another? If you are lucky you’ll have someone in your community team well versed in the world of databases and SQL queries, but it takes time to figure out what backend analytics data actually means. Professional support can be expensive and it may be hard to justify later as it typically has the community manager as the only main customer.  Figure out what you think you’ll want to know and how to get it early on. The sooner the better even if it doesn’t seem that critical at the time. #4 Lobbies guide you to the right places One piece of feedback that comes up more and more as we keep growing Engage is it’s hard to find stuff, or new people are not sure where to start. Something we’re doing now is defining some general topic areas of interest to be like “lobbies” into the platform and some common hashtags to go with them. I liken this to walking into a large medical or professional building for the first time.  There are hundreds of offices, and you look to a sign in the lobby to get guided to the right place for you.  We’re building that sign for members now, but again we missed the boat as the majority of the company has had their initial Engage experience. #3 Clean up, clean up, clean up Knowledge work and folksonomies are messy! The day we opened the doors to Engage I would have said we should keep everything ever created in Engage with an argument that it was a window into our collective knowledge so nothing should go.  Well, 6000+ groups and 200,000+ pieces of content later, I’ve changed my mind.  As previously mentioned, with too much “stuff” the system can be overwhelming to new members and it makes it harder to get what you’re looking for.   Do we need that help document about a tool we no longer have? NO!  Do we need that group that had 1 document and 2 discussions in the last two years? NO! Should we only have one group about a given topic instead of 4?  YES! Last fall, Engage defined a cleanup process for groups not used for a long time.  We also formed a volunteer cleaning army who are extra eyes on the hunt for “stuff” that should be updated, merged, or deleted.  It’s better late than never, but in line with what’s becoming a theme I wish these efforts had started earlier. #2 Communications & local community management One of the most important aspects of my job is to make sure people who should be talking to each other are actually doing it.  Connecting people to the other people they should know, the groups they should join, a piece of content that shouldn’t be missed.   I have worked both inside and outside of communications teams, and they are the best informed people in your company.  They know when something big is coming, how it impacts employees, how it fits with strategy, who else knows more, etc.  Having communications professionals who are power users can help scale up community management because they are already so well connected.  They also need to have the platform skills to pay attention without suffering email overload, how to grab someone’s attention, etc.  I wish I’d had figured this out much earlier.  If I had I would have groomed more communications colleagues into advocates and power members right at the start. #1 Grooming advocates vs. natural advocates I’ve just alluded to this above already. The very best advocates are those who naturally embrace your platform and automatically start to see new ways to work within it.  Those advocates seem to come out of the woodwork naturally since some of them are early adopters.  Not surprisingly, our best advocates today are those same people who were willing to come kick the tires when the community was completely empty.  Unfortunately, we didn’t get a global spread of those natural advocates.  I did ask around when we first launched for other people who might be good candidates, but didn’t push too hard as there were so many other things to get ready.  That was a mistake.  If I could get a redo I would have formally asked for people to be assigned where there were gaps and groomed them into an advocate.  Today as we find new advocates to fill the gaps, people are hesitant as the initial set has three years of practice are ahead of the curve power members; it definitely would have been easier earlier on. As fairly early adopters to corporate scale enterprise collaboration, there hasn’t been a roadmap to follow as we’ve grown Engage, which is part of the fun! It’s clear a lot of issues are more easily tackled the earlier you identify and begin to correct them, and I’ve identified the main five I wish I could redo.  In the spirit of collaboration, I hope someone else learns from my mistakes! View the original article by Jem here. 

  Read the article

• BI Applications overview

  - by sv744

  Welcome to Oracle BI applications blog! This blog will talk about various features, general roadmap, description of functionality and implementation steps related to Oracle BI applications. In the first post we start with an overview of the BI apps and will delve deeper into some of the topics below in the upcoming weeks and months. If there are other topics you would like us to talk about, pl feel free to provide feedback on that. The Oracle BI applications are a set of pre-built applications that enable pervasive BI by providing role-based insight for each functional area, including sales, service, marketing, contact center, finance, supplier/supply chain, HR/workforce, and executive management. For example, Sales Analytics includes role-based applications for sales executives, sales management, as well as front-line sales reps, each of whom have different needs. The applications integrate and transform data from a range of enterprise sources—including Siebel, Oracle, PeopleSoft, SAP, and others—into actionable intelligence for each business function and user role. This blog  starts with the key benefits and characteristics of Oracle BI applications. In a series of subsequent blogs, each of these points will be explained in detail. Why BI apps? Demonstrate the value of BI to a business user, show reports / dashboards / model that can answer their business questions as part of the sales cycle. Demonstrate technical feasibility of BI project and significantly lower risk and improve success Build Vs Buy benefit Don’t have to start with a blank sheet of paper. Help consolidate disparate systems Data integration in M&A situations Insulate BI consumers from changes in the OLTP Present OLTP data and highlight issues of poor data / missing data – and improve data quality and accuracy Prebuilt Integrations BI apps support prebuilt integrations against leading ERP sources: Fusion Applications, E- Business Suite, Peoplesoft, JD Edwards, Siebel, SAP Co-developed with inputs from functional experts in BI and Applications teams. Out of the box dimensional model to source model mappings Multi source and Multi Instance support Rich Data Model    BI apps have a very rich dimensionsal data model built over 10 years that incorporates best practises from BI modeling perspective as well as reflect the source system complexities  Thanks for reading a long post, and be on the lookout for future posts.  We will look forward to your valuable feedback on these topics as well as suggestions on what other topics would you like us to cover. I Conformed dimensional model across all business subject areas allows cross functional reporting, e.g. customer / supplier 360 Over 360 fact tables across 7 product areas CRM – 145, SCM – 47, Financials – 28, Procurement – 20, HCM – 27, Projects – 18, Campus Solutions – 21, PLM - 56 Supported by 300 physical dimensions Support for extensive calendars; Gregorian, enterprise and ledger based Conformed data model and metrics for real time vs warehouse based reporting  Multi-tenant enabled Extensive BI related transformations BI apps ETL and data integration support various transformations required for dimensional models and reporting requirements. All these have been distilled into common patterns and abstracted logic which can be readily reused across different modules Slowly Changing Dimension support Hierarchy flattening support Row / Column Hybrid Hierarchy Flattening As Is vs. As Was hierarchy support Currency Conversion :-  Support for 3 corporate, CRM, ledger and transaction currencies UOM conversion Internationalization / Localization Dynamic Data translations Code standardization (Domains) Historical Snapshots Cycle and process lifecycle computations Balance Facts Equalization of GL accounting chartfields/segments Standardized values for categorizing GL accounts Reconciliation between GL and subledgers to track accounted/transferred/posted transactions to GL Materialization of data only available through costly and complex APIs e.g. Fusion Payroll, EBS / Fusion Accruals Complex event Interpretation of source data – E.g. o    What constitutes a transfer o    Deriving supervisors via position hierarchy o    Deriving primary assignment in PSFT o    Categorizing and transposition to measures of Payroll Balances to specific metrics to support side by side comparison of measures of for example Fixed Salary, Variable Salary, Tax, Bonus, Overtime Payments. o    Counting of Events – E.g. converting events to fact counters so that for example the number of hires can easily be added up and compared alongside the total transfers and terminations. Multi pass processing of multiple sources e.g. headcount, salary, promotion, performance to allow side to side comparison. Adding value to data to aid analysis through banding, additional domain classifications and groupings to allow higher level analytical reporting and data discovery Calculation of complex measures examples: o    COGs, DSO, DPO, Inventory turns  etc o    Transfers within a Hierarchy or out of / into a hierarchy relative to view point in hierarchy. Configurability and Extensibility support  BI apps offer support for extensibility for various entities as automated extensibility or part of extension methodology Key Flex fields and Descriptive Flex support  Extensible attribute support (JDE)  Conformed Domains ETL Architecture BI apps offer a modular adapter architecture which allows support of multiple product lines into a single conformed model Multi Source Multi Technology Orchestration – creates load plan taking into account task dependencies and customers deployment to generate a plan based on a customers of multiple complex etl tasks Plan optimization allowing parallel ETL tasks Oracle: Bit map indexes and partition management High availability support    Follow the sun support. TCO BI apps support several utilities / capabilities that help with overall total cost of ownership and ensure a rapid implementation Improved cost of ownership – lower cost to deploy On-going support for new versions of the source application Task based setups flows Data Lineage Functional setup performed in Web UI by Functional person Configuration Test to Production support Security BI apps support both data and object security enabling implementations to quickly configure the application as per the reporting security needs Fine grain object security at report / dashboard and presentation catalog level Data Security integration with source systems  Extensible to support external data security rules Extensive Set of KPIs Over 7000 base and derived metrics across all modules Time series calculations (YoY, % growth etc) Common Currency and UOM reporting Cross subject area KPIs (analyzing HR vs GL data, drill from GL to AP/AR, etc) Prebuilt reports and dashboards 3000+ prebuilt reports supporting a large number of industries Hundreds of role based dashboards Dynamic currency conversion at dashboard level Highly tuned Performance The BI apps have been tuned over the years for both a very performant ETL and dashboard performance. The applications use best practises and advanced database features to enable the best possible performance. Optimized data model for BI and analytic queries Prebuilt aggregates& the ability for customers to create their own aggregates easily on warehouse facts allows for scalable end user performance Incremental extracts and loads Incremental Aggregate build Automatic table index and statistics management Parallel ETL loads Source system deletes handling Low latency extract with Golden Gate Micro ETL support Bitmap Indexes Partitioning support Modularized deployment, start small and add other subject areas seamlessly Source Specfic Staging and Real Time Schema Support for source specific operational reporting schema for EBS, PSFT, Siebel and JDE Application Integrations The BI apps also allow for integration with source systems as well as other applications that provide value add through BI and enable BI consumption during operational decision making Embedded dashboards for Fusion, EBS and Siebel applications Action Link support Marketing Segmentation Sales Predictor Dashboard Territory Management External Integrations The BI apps data integration choices include support for loading extenral data External data enrichment choices : UNSPSC, Item class etc. Extensible Spend Classification Broad Deployment Choices Exalytics support Databases :  Oracle, Exadata, Teradata, DB2, MSSQL ETL tool of choice : ODI (coming), Informatica Extensible and Customizable Extensible architecture and Methodology to add custom and external content Upgradable across releases

  Read the article

• Metrics - A little knowledge can be a dangerous thing (or 'Why you're not clever enough to interpret metrics data')

  - by Jason Crease

  At RedGate Software, I work on a .NET obfuscator  called SmartAssembly.  Various features of it use a database to store various things (exception reports, name-mappings, etc.) The user is given the option of using either a SQL-Server database (which requires them to have Microsoft SQL Server), or a Microsoft Access MDB file (which requires nothing). MDB is the default option, but power-users soon switch to using a SQL Server database because it offers better performance and data-sharing. In the fashionable spirit of optimization and metrics, an obvious product-management question is 'Which is the most popular? SQL Server or MDB?' We've collected data about this fact, using our 'Feature-Usage-Reporting' technology (available as part of SmartAssembly) and more recently our 'Application Metrics' technology: Parameter Number of users % of total users Number of sessions Number of usages SQL Server 28 19.0 8115 8115 MDB 114 77.6 1449 1449 (As a disclaimer, please note than SmartAssembly has far more than 132 users . This data is just a selection of one build) So, it would appear that SQL-Server is used by fewer users, but more often. Great. But here's why these numbers are useless to me: Only the original developers understand the data What does a single 'usage' of 'MDB' mean? Does this happen once per run? Once per option change? On clicking the 'Obfuscate Now' button? When running the command-line version or just from the UI version? Each question could skew the data 10-fold either way, and the answers only known by the developer that instrumented the application in the first place. In other words, only the original developer can interpret the data - product-managers cannot interpret the data unaided. Most of the data is from uninterested users About half of people who download and run a free-trial from the internet quit it almost immediately. Only a small fraction use it sufficiently to make informed choices. Since the MDB option is the default one, we don't know how many of those 114 were people CHOOSING to use the MDB, or how many were JUST HAPPENING to use this MDB default for their 20-second trial. This is a problem we see across all our metrics: Are people are using X because it's the default or are they using X because they want to use X? We need to segment the data further - asking what percentage of each percentage meet our criteria for an 'established user' or 'informed user'. You end up spending hours writing sophisticated and dubious SQL queries to segment the data further. Not fun. You can't find out why they used this feature Metrics can answer the when and what, but not the why. Why did people use feature X? If you're anything like me, you often click on random buttons in unfamiliar applications just to explore the feature-set. If we listened uncritically to metrics at RedGate, we would eliminate the most-important and more-complex features which people actually buy the software for, leaving just big buttons on the main page and the About-Box. "Ah, that's interesting!" rather than "Ah, that's actionable!" People do love data. Did you know you eat 1201 chickens in a lifetime? But just 4 cows? Interesting, but useless. Often metrics give you a nice number: '5.8% of users have 3 or more monitors' . But unless the statistic is both SUPRISING and ACTIONABLE, it's useless. Most metrics are collected, reviewed with lots of cooing. and then forgotten. Unless a piece-of-data could change things, it's useless collecting it. People get obsessed with significance levels The first things that lots of people do with this data is do a t-test to get a significance level ("Hey! We know with 99.64% confidence that people prefer SQL Server to MDBs!") Believe me: other causes of error/misinterpretation in your data are FAR more significant than your t-test could ever comprehend. Confirmation bias prevents objectivity If the data appears to match our instinct, we feel satisfied and move on. If it doesn't, we suspect the data and dig deeper, plummeting down a rabbit-hole of segmentation and filtering until we give-up and move-on. Data is only useful if it can change our preconceptions. Do you trust this dodgy data more than your own understanding, knowledge and intelligence?  I don't. There's always multiple plausible ways to interpret/action any data Let's say we segment the above data, and get this data: Post-trial users (i.e. those using a paid version after the 14-day free-trial is over): Parameter Number of users % of total users Number of sessions Number of usages SQL Server 13 9.0 1115 1115 MDB 5 4.2 449 449 Trial users: Parameter Number of users % of total users Number of sessions Number of usages SQL Server 15 10.0 7000 7000 MDB 114 77.6 1000 1000 How do you interpret this data? It's one of: Mostly SQL Server users buy our software. People who can't afford SQL Server tend to be unable to afford or unwilling to buy our software. Therefore, ditch MDB-support. Our MDB support is so poor and buggy that our massive MDB user-base doesn't buy it.  Therefore, spend loads of money improving it, and think about ditching SQL-Server support. People 'graduate' naturally from MDB to SQL Server as they use the software more. Things are fine the way they are. We're marketing the tool wrong. The large number of MDB users represent uninformed downloaders. Tell marketing to aggressively target SQL Server users. To choose an interpretation you need to segment again. And again. And again, and again. Opting-out is correlated with feature-usage Metrics tends to be opt-in. This skews the data even further. Between 5% and 30% of people choose to opt-in to metrics (often called 'customer improvement program' or something like that). Casual trial-users who are uninterested in your product or company are less likely to opt-in. This group is probably also likely to be MDB users. How much does this skew your data by? Who knows? It's not all doom and gloom. There are some things metrics can answer well. Environment facts. How many people have 3 monitors? Have Windows 7? Have .NET 4 installed? Have Japanese Windows? Minor optimizations.  Is the text-box big enough for average user-input? Performance data. How long does our app take to start? How many databases does the average user have on their server? As you can see, questions about who-the-user-is rather than what-the-user-does are easier to answer and action. Conclusion Use SmartAssembly. If not for the metrics (called 'Feature-Usage-Reporting'), then at least for the obfuscation/error-reporting. Data raises more questions than it answers. Questions about environment are the easiest to answer.

  Read the article

• How To: Using SimpleMembserhipProvider with MySql Connector/Net.

  - by Francisco Tirado

  Now on Connector/Net 6.9 the users will have the ability to use SimpleMembership Provider on MVC4 templates. The configuration is very simple and also have compatibility with OAuth, in this post we'll explain step by step how to configure it in a MVC 4 Web Application. Requirements  The requirements to use SimpleMembership with Connector/Net are: Install Connector/Net 6.9, or download the No Install version. Net Framework 4.0 or greater. MVC 4  Visual Studio 2012 or newer version Creating and configuring a new project In this example we'll use VS2012 to create the project basis on the Internet Aplication template and using Entity Framework to manage the User model. Open VS 2012 and create a new project, we'll create a new MVC 4 Web Application and configure the project to use Net Framework 4.5. Type a name for the project and then click “Ok”. In the next dialog we'll choose the “Internet Application” template and use Razor as engine without creating a test project. Click “Ok” to continue. Now we have a new project with the templates necessaries to run a Web Application with the default values. We'll use the current files to continue working. If you have installed Connector/Net you can skip this step, if you don't have installed but you're planning to do it, please install it and continue with the next step. If you're using the No Install version of Connector/Net we'll need to add the references to our project, the assemblies needed are: MySql.Data, MySql.Data.Entities and MySql.Web. Be sure that the assemblies chosen match the Net Framework version used in our project and the MySql.Data.Entities is compatible with EF5 (EF5 is the default added by the project). Now open the “web.config” file, and under the <connectionStrings> node add a connection string that points to a MySql instance. We'll use the following connection configuration: <add name="MyConnection" connectionString="server=localhost;UserId=root;password=pass;database=MySqlSimpleMembership;" providerName="MySql.Data.MySqlClient"/> Under the node <system.web> we'll add the following configuration: <membership defaultProvider="MySqlSimpleMembershipProvider"><providers><clear/><add name="MySqlSimpleMembershipProvider" type="MySql.Web.Security.MySqlSimpleMembershipProvider,MySql.Web,Version=6.9.3.0,Culture=neutral,PublicKeyToken=c5687fc88969c44d" applicationName="MySqlSimpleMembershipTest" description="MySQLdefaultapplication" connectionStringName="MyConnection"  userTableName="UserProfile" userIdColumn="UserId" userNameColumn="UserName" autoGenerateTables="True"/></providers></membership> In the previous configuration the mandatory properties are: connectionStringName, userTableName, userIdColumn, userNameColumn and autoGenerateTables. If the other properties are not provided a default value is set to it but if the mandatory properties are not set a ProviderException will be thrown. The valid properties for the MySqlSimpleMembership are the same used for MySqlMembership plus the mandatory fields. UserTableName: Name of the table where will be stored the user, this table is independent from the schema generated by the provider and can be edited later by the user. UserId: name of the column that will store the id for the records in the userTableName. UserName : name of the column that will store the name/user for the records in the userTableName. The connectionStringName property must match a connection string defined in web.config file. Once the configuration is done in web.config, we need to be sure that our database context for the Users Table point to the right connection string. In our case we just need to update the class UsersContext in the file AcountModel.cs in the Models folder. The file also contains the UserProfile class which match the configuration for our UserTable. Other class that needs to be updated is the SimpleMembershipInitializer in the file InitializeSimpleMembershipAttribute.cs in the Filters folder. In that class we'll see a call to the method “WebSecurity.InitializeDatabaseConnection”, in that call is where we need to update the parameters to match our configuration. If the database that you configure in your connection string doesn't exists, you need to create it empty. Now we're ready to run our web application, press F5 or the Run button in the tool bar. You'll see the following screen: If you go to your database used by the application you'll see some tables created, now we are using SimpleMembership. Now create a user, click on “Register” at the top-right in the web page. Type your user name and password, then click on “Register”. You'll be redirected to the home page and you'll see the name of your user at the top-right page. If you take a look on the tables just created in your database you will find the data about the user you just register. In our case the tables that contains the information are UserProfile and Webpages_Membership.  Configuring OAuth Other option to access your website will be using OAuth, so you can validate an user using an external account like Facebook, Twitter, Google, etc. In this post we'll enable the authentication for Google account in our application. Go to the class AuthConfig.cs in the folder App_Start. In the method “RegisterAuth” uncomment the last line where is the call to the method “OauthWebSecurity.RegisterGoogleClient”. Run the application. Once the application is running click on “Login”. You will see at the right side the option to login using a Google account, click on “Google”.  You will be asked for Google credentials. If your login is successful you'll see a message asking for your approval to give permission to your site to access your information. Click on “Accept”. Now a page to register your user will be shown, click on “Register”. Now your new user is logged in in your application. You can take a look of the user information created in the tables  UserProfile and Webpages_OauthMembership. If you want to use another external option to authenticate users you must enable the client in the same class where we enable the Google authentication, but for others providers is mandatory to register your Application in their site. Once you have register your application they will give you a token/key and the id for your application, that information you're going to use it to register the client. Thanks for reading.

  Read the article

• Using IIS Logs for Performance Testing with Visual Studio

  - by Tarun Arora

  In this blog post I’ll show you how you can play back the IIS Logs in Visual Studio to automatically generate the web performance tests. You can also download the sample solution I am demo-ing in the blog post. Introduction Performance testing is as important for new websites as it is for evolving websites. If you already have your website running in production you could mine the information available in IIS logs to analyse the dense zones (most used pages) and performance test those pages rather than wasting time testing & tuning the least used pages in your application. What are IIS Logs To help with server use and analysis, IIS is integrated with several types of log files. These log file formats provide information on a range of websites and specific statistics, including Internet Protocol (IP) addresses, user information and site visits as well as dates, times and queries. If you are using IIS 7 and above you will find the log files in the following directory C:\Interpub\Logs\ Walkthrough 1. Download and Install Log Parser from the Microsoft download Centre. You should see the LogParser.dll in the install folder, the default install location is C:\Program Files (x86)\Log Parser 2.2. LogParser.dll gives us a library to query the iis log files programmatically. By the way if you haven’t used Log Parser in the past, it is a is a powerful, versatile tool that provides universal query access to text-based data such as log files, XML files and CSV files, as well as key data sources on the Windows operating system such as the Event Log, the Registry, the file system, and Active Directory. More details… 2. Create a new test project in Visual Studio. Let’s call it IISLogsToWebPerfTestDemo.   3.  Delete the UnitTest1.cs class that gets created by default. Right click the solution and add a project of type class library, name it, IISLogsToWebPerfTestEngine. Delete the default class Program.cs that gets created with the project. 4. Under the IISLogsToWebPerfTestEngine project add a reference to Microsoft.VisualStudio.QualityTools.WebTestFramework – c:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE\PublicAssemblies\Microsoft.VisualStudio.QualityTools.WebTestFramework.dll LogParser also called MSUtil - c:\users\tarora\documents\visual studio 2010\Projects\IisLogsToWebPerfTest\IisLogsToWebPerfTestEngine\obj\Debug\Interop.MSUtil.dll 5. Right click IISLogsToWebPerfTestEngine project and add a new classes – IISLogReader.cs The IISLogReader class queries the iis logs using the log parser. using System; using System.Collections.Generic; using System.Text; using MSUtil; using LogQuery = MSUtil.LogQueryClassClass; using IISLogInputFormat = MSUtil.COMIISW3CInputContextClassClass; using LogRecordSet = MSUtil.ILogRecordset; using Microsoft.VisualStudio.TestTools.WebTesting; using System.Diagnostics; namespace IisLogsToWebPerfTestEngine { // By making use of log parser it is possible to query the iis log using select queries public class IISLogReader { private string _iisLogPath; public IISLogReader(string iisLogPath) { _iisLogPath = iisLogPath; } public IEnumerable<WebTestRequest> GetRequests() { LogQuery logQuery = new LogQuery(); IISLogInputFormat iisInputFormat = new IISLogInputFormat(); // currently these columns give us suffient information to construct the web test requests string query = @"SELECT s-ip, s-port, cs-method, cs-uri-stem, cs-uri-query FROM " + _iisLogPath; LogRecordSet recordSet = logQuery.Execute(query, iisInputFormat); // Apply a bit of transformation while (!recordSet.atEnd()) { ILogRecord record = recordSet.getRecord(); if (record.getValueEx("cs-method").ToString() == "GET") { string server = record.getValueEx("s-ip").ToString(); string path = record.getValueEx("cs-uri-stem").ToString(); string querystring = record.getValueEx("cs-uri-query").ToString(); StringBuilder urlBuilder = new StringBuilder(); urlBuilder.Append("http://"); urlBuilder.Append(server); urlBuilder.Append(path); if (!String.IsNullOrEmpty(querystring)) { urlBuilder.Append("?"); urlBuilder.Append(querystring); } // You could make substitutions by introducing parameterized web tests. WebTestRequest request = new WebTestRequest(urlBuilder.ToString()); Debug.WriteLine(request.UrlWithQueryString); yield return request; } recordSet.moveNext(); } Console.WriteLine(" That's it! Closing the reader"); recordSet.close(); } } }   6. Connect the dots by adding the project reference ‘IisLogsToWebPerfTestEngine’ to ‘IisLogsToWebPerfTest’. Right click the ‘IisLogsToWebPerfTest’ project and add a new class ‘WebTest1Coded.cs’ The WebTest1Coded.cs inherits from the WebTest class. By overriding the GetRequestMethod we can inject the log files to the IISLogReader class which uses Log parser to query the log file and extract the web requests to generate the web test request which is yielded back for play back when the test is run. namespace IisLogsToWebPerfTest { using System; using System.Collections.Generic; using System.Text; using Microsoft.VisualStudio.TestTools.WebTesting; using Microsoft.VisualStudio.TestTools.WebTesting.Rules; using IisLogsToWebPerfTestEngine; // This class is a coded web performance test implementation, that simply passes // the path of the iis logs to the IisLogReader class which does the heavy // lifting of reading the contents of the log file and converting them to tests. // You could have multiple such classes that inherit from WebTest and implement // GetRequestEnumerator Method and pass differnt log files for different tests. public class WebTest1Coded : WebTest { public WebTest1Coded() { this.PreAuthenticate = true; } public override IEnumerator<WebTestRequest> GetRequestEnumerator() { // substitute the highlighted path with the path of the iis log file IISLogReader reader = new IISLogReader(@"C:\Demo\iisLog1.log"); foreach (WebTestRequest request in reader.GetRequests()) { yield return request; } } } }   7. Its time to fire the test off and see the iis log playback as a web performance test. From the Test menu choose Test View Window you should be able to see the WebTest1Coded test show up. Highlight the test and press Run selection (you can also debug the test in case you face any failures during test execution). 8. Optionally you can create a Load Test by keeping ‘WebTest1Coded’ as the base test. Conclusion You have just helped your testing team, you now have become the coolest developer in your organization! Jokes apart, log parser and web performance test together allow you to save a lot of time by not having to worry about what to test or even worrying about how to record the test. If you haven’t already, download the solution from here. You can take this to the next level by using LogParser to extract the log files as part of an end of day batch to a database. See the usage trends by user this solution over a longer term and have your tests consume the web requests now stored in the database to generate the web performance tests. If you like the post, don’t forget to share … Keep RocKiNg!

  Read the article

• Benefits of Behavior Driven Development

  - by Aligned

  Originally posted on: http://geekswithblogs.net/Aligned/archive/2013/07/26/benefits-of-behavior-driven-development.aspxContinuing my previous article on BDD, I wanted to point out some benefits of BDD and since BDD is an extension of Test Driven Development (TDD), you get those as well. I’ll add another article on some possible downsides of this approach. There are many articles about the benefits of TDD and they apply to BDD. I’ve pointed out some here and copied some of the main points for each article, but there are many more including the book The Art of Unit Testing by Roy Osherove. http://geekswithblogs.net/leesblog/archive/2008/04/30/the-benefits-of-test-driven-development.aspx (Lee Brandt) Stability Accountability Design Ability Separated Concerns Progress Indicator http://tddftw.com/benefits-of-tdd/ Help maintainers understand the intention behind the code Bring validation and proper data handling concerns to the forefront. Writing the tests first is fun. Better APIs come from writing testable code. TDD will make you a better developer. http://www.slideshare.net/dhelper/benefit-from-unit-testing-in-the-real-world (from Typemock). Take a look at the slides, especially the extra time required for TDD (slide 10) and the next one of the bugs avoided using TDD (slide 11). Less bugs (slide 11) about testing and development (13) Increase confidence in code (14) Fearlessly change your code (14) Document Requirements (14) also see http://visualstudiomagazine.com/articles/2013/06/01/roc-rocks.aspx Discover usability issues early (14) All these points and articles are great and there are many more. The following are my additions to the benefits of BDD from using it in real projects for my company. July 2013 on MSDN - Behavior-Driven Design with SpecFlow Scott Allen did a very informative TDD and MVC module, but to me he is doing BDDCompile and Execute Requirements in Microsoft .NET ~ Video from TechEd 2012 Communication I was working through a complicated task that the decision tree kept growing. After writing out the Given, When, Then of the scenario, I was able tell QA what I had worked through for their initial test cases. They were able to add from there. It is also useful to use this language with other developers, managers, or clients to help make informed decisions on if it meets the requirements or if it can simplified to save time (money). Thinking through solutions, before starting to code This was the biggest benefit to me. I like to jump into coding to figure out the problem. Many times I don't understand my path well enough and have to do some parts over. A past supervisor told me several times during reviews that I need to get better at seeing "the forest for the trees". When I sit down and write out the behavior that I need to implement, I force myself to think things out further and catch scenarios before they get to QA. A co-worker that is new to BDD and we’ve been using it in our new project for the last 6 months, said “It really clarifies things”. It took him awhile to understand it all, but now he’s seeing the value of this approach (yes there are some downsides, but that is a different issue). Developers’ Confidence This is huge for me. With tests in place, my confidence grows that I won’t break code that I’m not directly changing. In the past, I’ve worked on projects with out tests and we would frequently find regression bugs (or worse the users would find them). That isn’t fun. We don’t catch all problems with the tests, but when QA catches one, I can write a test to make sure it doesn’t happen again. It’s also good for Releasing code, telling your manager that it’s good to go. As time goes on and the code gets older, how confident are you that checking in code won’t break something somewhere else? Merging code - pre release confidence If you’re merging code a lot, it’s nice to have the tests to help ensure you didn’t merge incorrectly. Interrupted work I had a task that I started and planned out, then was interrupted for a month because of different priorities. When I started it up again, and un-shelved my changes, I had the BDD specs and it helped me remember what I had figured out and what was left to do. It would have much more difficult without the specs and tests. Testing and verifying complicated scenarios Sometimes in the UI there are scenarios that get tricky, because there are a lot of steps involved (click here to open the dialog, enter the information, make sure it’s valid, when I click cancel it should do {x}, when I click ok it should close and do {y}, then do this, etc….). With BDD I can avoid some of the mouse clicking define the scenarios and have them re-run quickly, without using a mouse. UI testing is still needed, but this helps a bunch. The same can be true for tricky server logic. Documentation of Assumptions and Specifications The BDD spec tests (Jasmine or SpecFlow or other tool) also work as documentation and show what the original developer was trying to accomplish. It’s not a different Word document, so developers will keep this up to date, instead of letting it become obsolete. What happens if you leave the project (consulting, new job, etc) with no specs or at the least good comments in the code? Sometimes I think of a new scenario, so I add a failing spec and continue in the same stream of thought (don’t forget it because it was on a piece of paper or in a notepad). Then later I can come back and handle it and have it documented. Jasmine tests and JavaScript –> help deal with the non-typed system I like JavaScript, but I also dislike working with JavaScript. I miss C# telling me if a property doesn’t actually exist at build time. I like the idea of TypeScript and hope to use it more in the future. I also use KnockoutJs, which has observables that need to be called with ending (), since the observable is a function. It’s hard to remember when to use () or not and the Jasmine specs/tests help ensure the correct usage.   This should give you an idea of the benefits that I see in using the BDD approach. I’m sure there are more. It talks a lot of practice, investment and experimentation to figure out how to approach this and to get comfortable with it. I agree with Scott Allen in the video I linked above “Remember that TDD can take some practice. So if you're not doing test-driven design right now? You can start and practice and get better. And you'll reach a point where you'll never want to get back.”

  Read the article

• Delight and Excite

  - by Applications User Experience

  Mick McGee, CEO & President, EchoUser Editor’s Note: EchoUser is a User Experience design firm in San Francisco and a member of the Oracle Usability Advisory Board. Mick and his staff regularly consult on Oracle Applications UX projects. Being part of a user experience design firm, we have the luxury of working with a lot of great people across many great companies. We get to help people solve their problems.  At least we used to. The basic design challenge is still the same; however, the goal is not necessarily to solve “problems” anymore; it is, “I want our products to delight and excite!” The question for us as UX professionals is how to design to those goals, and then how to assess them from a usability perspective. I’m not sure where I first heard “delight and excite” (A book? blog post? Facebook  status? Steve Jobs quote?), but now I hear these listed as user experience goals all the time. In particular, somewhat paradoxically, I routinely hear them in enterprise software conversations. And when asking these same enterprise companies what will make the project successful, we very often hear, “Make it like Apple.” In past days, it was “make it like Yahoo (or Amazon or Google“) but now Apple is the common benchmark. Steve Jobs and Apple were not secrets, but with Jobs’ passing and Apple becoming the world’s most valuable company in the last year, the impact of great design and experience is suddenly very widespread. In particular, users’ expectations have gone way up. Being an enterprise company is no shield to the general expectations that users now have, for all products. Designing a “Minimum Viable Product” The user experience challenge has historically been, to echo the words of Eric Ries (author of Lean Startup) , to create a “minimum viable product”: the proverbial, “make it good enough”. But, in our profession, the “minimum viable” part of that phrase has oftentimes, unfortunately, referred to the design and user experience. Technology typically dominated the focus of the biggest, most successful companies. Few have had the laser focus of Apple to also create and sell design and user experience alongside great technology. But now that Apple is the most valuable company in the world, copying their success is a common undertaking. Great design is now a premium offering that everyone wants, from the one-person startup to the largest companies, consumer and enterprise. This emerging business paradigm will have significant impact across the user experience design process and profession. One area that particularly interests me is, how are we going to evaluate these new emerging “delight and excite” experiences, which are further customized to each particular domain? How to Measure “Delight and Excite” Traditional usability measures of task completion rate, assists, time, and errors are still extremely useful in many situations; however, they are too blunt to offer much insight into emerging experiences “Satisfaction” is usually assessed in user testing, in roughly equivalent importance to the above objective metrics. Various surveys and scales have provided ways to measure satisfying UX, with whatever questions they include. However, to meet the demands of new business goals and keep users at the center of design and development processes, we have to explore new methods to better capture custom-experience goals and emotion-driven user responses. We have had success assessing custom experiences, including “delight and excite”, by employing a variety of user testing methods that tend to combine formative and summative techniques (formative being focused more on identifying usability issues and ways to improve design, and summative focused more on metrics). Our most successful tool has been one we’ve been using for a long time, Magnitude Estimation Technique (MET). But it’s not necessarily about MET as a measure, rather how it is created. Caption: For one client, EchoUser did two rounds of testing.  Each test was a mix of performing representative tasks and gathering qualitative impressions. Each user participated in an in-person moderated 1-on-1 session for 1 hour, using a testing set-up where they held the phone. The primary goal was to identify usability issues and recommend design improvements. MET is based on a definition of the desired experience, which users will then use to rate items of interest (usually tasks in a usability test). In other words, a custom experience definition needs to be created. This can then be used to measure satisfaction in accomplishing tasks; “delight and excite”; or anything else from strategic goals, user demands, or elsewhere. For reference, our standard MET definition in usability testing is: “User experience is your perception of how easy to use, well designed and productive an interface is to complete tasks.” Articulating the User Experience We’ve helped construct experience definitions for several clients to better match their business goals. One example is a modification of the above that was needed for a company that makes medical-related products: “User experience is your perception of how easy to use, well-designed, productive and safe an interface is for conducting tasks. ‘Safe’ is how free an environment (including devices, software, facilities, people, etc.) is from danger, risk, and injury.” Another example is from a company that is pushing hard to incorporate “delight” into their enterprise business line: “User experience is your perception of a product’s ease of use and learning, satisfaction and delight in design, and ability to accomplish objectives.” I find the last one particularly compelling in that there is little that identifies the experience as being for a highly technical enterprise application. That definition could easily be applied to any number of consumer products. We have gone further than the above, including “sexy” and “cool” where decision-makers insisted they were part of the desired experience. We also applied it to completely different experiences where the “interface” was, for example, riding public transit, the “tasks” were train rides, and we followed the participants through the train-riding journey and rated various aspects accordingly: “A good public transportation experience is a cost-effective way of reliably, conveniently, and safely getting me to my intended destination on time.” To construct these definitions, we’ve employed both bottom-up and top-down approaches, depending on circumstances. For bottom-up, user inputs help dictate the terms that best fit the desired experience (usually by way of cluster and factor analysis). Top-down depends on strategic, visionary goals expressed by upper management that we then attempt to integrate into product development (e.g., “delight and excite”). We like a combination of both approaches to push the innovation envelope, but still be mindful of current user concerns. Hopefully the idea of crafting your own custom experience, and a way to measure it, can provide you with some ideas how you can adapt your user experience needs to whatever company you are in. Whether product-development or service-oriented, nearly every company is ultimately providing a user experience. The Bottom Line Creating great experiences may have been popularized by Steve Jobs and Apple, but I’ll be honest, it’s a good feeling to be moving from “good enough” to “delight and excite,” despite the challenge that entails. In fact, it’s because of that challenge that we will expand what we do as UX professionals to help deliver and assess those experiences. I’m excited to see how we, Oracle, and the rest of the industry will live up to that challenge.

  Read the article

• How to Plug a Small Hole in NetBeans JSF (Join Table) Code Generation

  - by MarkH

  I was asked recently to provide an assist with designing and building a small-but-vital application that had at its heart some basic CRUD (Create, Read, Update, & Delete) functionality, built upon an Oracle database, to be accessible from various locations. Working from the stated requirements, I fleshed out the basic application and database designs and, once validated, set out to complete the first iteration for review. Using SQL Developer, I created the requisite tables, indices, and sequences for our first run. One of the tables was a many-to-many join table with three fields: one a primary key for that table, the other two being primary keys for the other tables, represented as foreign keys in the join table. Here is a simplified example of the trio of tables: Once the database was in decent shape, I fired up NetBeans to let it have first shot at the code. NetBeans does a great job of generating a mountain of essential code, saving developers what must be millions of hours of effort each year by building a basic foundation with a few clicks and keystrokes. Lest you think it (or any tool) can do everything for you, however, occasionally something tosses a paper clip into the delicate machinery and makes you open things up to fix them. Join tables apparently qualify.  :-) In the case above, the entity class generated for the join table (New Entity Classes from Database) included an embedded object consisting solely of the two foreign key fields as attributes, in addition to an object referencing each one of the "component" tables. The Create page generated (New JSF Pages from Entity Classes) worked well to a point, but when trying to save, we were greeted with an error: Transaction aborted. Hmm. A quick debugger session later and I'd identified the issue: when trying to persist the new join-table object, the embedded "foreign-keys-only" object still had null values for its two (required value) attributes...even though the embedded table objects had populated key attributes. Here's the simple fix: In the join-table controller class, find the public String create() method. It will look something like this:     public String create() {        try {            getFacade().create(current);            JsfUtil.addSuccessMessage(ResourceBundle.getBundle("/Bundle").getString("JoinEntityCreated"));            return prepareCreate();        } catch (Exception e) {            JsfUtil.addErrorMessage(e, ResourceBundle.getBundle("/Bundle").getString("PersistenceErrorOccured"));            return null;        }    } To restore balance to the force, modify the create() method as follows (changes in red):     public String create() {         try {            // Add the next two lines to resolve:            current.getJoinEntityPK().setTbl1id(current.getTbl1().getId().toBigInteger());            current.getJoinEntityPK().setTbl2id(current.getTbl2().getId().toBigInteger());            getFacade().create(current);            JsfUtil.addSuccessMessage(ResourceBundle.getBundle("/Bundle").getString("JoinEntityCreated"));            return prepareCreate();        } catch (Exception e) {            JsfUtil.addErrorMessage(e, ResourceBundle.getBundle("/Bundle").getString("PersistenceErrorOccured"));            return null;        }    } I'll be refactoring this code shortly, but for now, it works. Iteration one is complete and being reviewed, and we've met the milestone. Here's to happy endings (and customers)! All the best,Mark

  Read the article

• WebLogic Server 12c????????????????????????????????????/???????WebLogic Server 12c Forum 2012?????

  - by ???02

  2012?1??????WebLogic Server 12c???200??????????????????????????????????????????????????????????????????????????????????????????????????????????????????????2012?8????????WebLogic Server 12c Forum 2012????????·??????????????????????????/?????????????????(???) ????????????WebLogic Server 12c????????? ??WebLogic Server???????·???????WebLogic Server?????????????????????????????????????WebLogic Server 12c Forum 2012?????????????????·????????????????????????????????????????????????????·?????????????WebLogic Server 12c??????????????/????????????? ???????????????????????????? ????????????????????????????????????? ?????? ??????????????????????????????????? ??????????????????????????????????????????????????????????????????????????“??????????????????????????”????????????????????????WebLogic Server 11g?????????????????? (1)????????????????????! = ??ID????????? WebLogic Server??????????????????????????????????????????????????????????????????????? ????????????????? ?????????·??????????????????? ??????init.d???????????? ???????????????ID????(boot.properties)??????????????????????WebLogic Server?????????????????????????????????? ???ID????????? <DOMAIN_HOME>/servers//security???????????·?????boot.properties????????????2??????? username= password= ???????????????????WebLogic Server?????????????????????????????????????????????????????????????????? (2)WLST???????????????????! = WLST????????? WebLogic Server???????????????????????????????????????????????????????????????/?????????????WLST(WebLogic Scripting Tool)????????????????????????????????????????????????????????????????????/????????????WLST?????????? ?????????????WLST???????????????????????Python?Java?????Jython?????????????WebLogic Server?????????????MBean???????????????????????????????????WLST?????????????Excel????????????????????????????????????????????????????????????????????????????WLST?????????????????????????????????? ?WLST???????????? ????????[????·????]-[???????]?????????????????[??]???????? ???????????????????????????[?????]????????py?????WLST???????????????????????????[??]??????????????????? ???????????????WLST?????????????????????WLST???????????????????????????????????????????????????????????????????? (3)????SQL?WebLogic Server???????! = ????·????? ??????????WebLogic Server??????????????????????????????SQL??????????????????????????????????·????????????????????????????????????????·???????????WebLogic Server????????·???????·???????????????WebLogic Server????/?????????????????????????????????????JDBC????????????????????????????SQL?ResultSet?????????????·????????? ????·????????????? ?????·??????? ????????[??]-[????]-[?????]-?????????????WebLogic Server?????/?????????????????????????????????????????[weblogic]-[jdbc]-[sql]-[DebugJDBCSQL]?????????[???]???????? ??????JDBC?????·???????·????????? ????/???????????????????????/???????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????? (4)[??]??????????????! = [??????????]????? ?[??]????????????????????????????????????????????????????????????????????????????[??]?????????????????????????????????2??????????????????????????????????????????????????????????????????????????????????????????????????????[??????????]?????????2?????????????????????????? ?????????2????????????? ????????[??????]-[???]-[???????????????]??????[???·???????]?????[??????????]?????????[??]???????? ??????????????????????????? (5)????????????????????????????! = ?V$SESSION.PROGRAM?????????????? ???Oracle Database?????????????????????????? WebLogic Server?????????????????????????????????????????????????????????????????????????????1??WebLogic Server????????????????????????????????????????????????????????????????????????????????????????????????????????????????? ???????????????V$SESSION.PROGRAM?????????????Oracle Database?????????·?????????????????????????????????V$SESSION????????????????PROGRAM????????????????????????????WebLogic Server???????????????????????????JDBC Thin Client???JDBC????????????????????????????????????????PROGRAM???????????????????????·?????????????????????? V$SESSION.PROGRAM???????????????????????????? ?V$SESSION.PROGRAM??????????????? ???????????([???JDBC?????????]??)?[?????]?????1??????? v$session.program= (6)???·???????·????????! = ????·????·????????? WebLogic Server?????????????????????????????????(???·??)????????????????·???????1??????????????????????????????????????????WebLogic Server?????????????????????????????????? ??????????????????·????·?????????????????????????WebLogic Server?????????????????????????????????????? ???????????JDK???????Log4j????????????????WebLogic Server???????????????? WebLogic Server????????JDK?Log4j??????????????????JDK?????????? ????·????·???????????????? ?????·????·????????? JDK???Log4j?????????????????????/?????????????? ?JDK???:weblogic.logging.ServerLoggingHandler ?Log4j???:weblogic.logging.log4j.ServerLoggingAppender ??????Log4j?????????????(????)? <appender name="file" class="org.apache.log4j.FileAppender"> <param name="File" value=“applog.log" /> <param name="Append" value="true" /> <layout class="org.apache.log4j.PatternLayout"> <param name="ConversionPattern" value="%d %5p %c{1} - %m%n" /> </layout> </appender> <appender name="server" class="weblogic.logging.log4j.ServerLoggingAppender"/> ?????????????????????????????????????????WebLogic Server?????????????????????????????????????? ?JDK???:-Djava.util.loggin.config.file=<PATH> ?Log4j???:-Dlog4j.configuration=<PATH> ???????????WAR??????????????????????·????·??????????WebLogic Server??????????????????????????????????????WebLogic Server???????????????????? (7)BEA??????????????????????! = GetMessage??????? WebLogic Server????????·??????????????(?BEA-XXXXXX??????????????????BEA?????)????WebLogic Server?HTML??????????????????Web????????????????????????????????????????????? ????????????GetMessage?????????????BEA?????????????????????????????????????????? ?GetMessage????????? java?????WebLogic Server?GetMessage???????????? java weblogic.GetMessage ?????????? ?-id XXXX:???????????? ?-verbose:????????? ?-lang XX:???????(?????????????????????????????????????) ????BEA-000337?????????????????????????????? java weblogic.GetMessage -verbose -id 000337 -lang ja 000337: ?????"{2}"?????{0}?"{1}"??????????????????????????(StuckThreadMaxTime)"{3}"?????????????·????: {4} L10n?????: weblogic.kernel I18n?????: weblogic.kernel ??????: WebLogicServer ???: ??? ????·????: false ????????: ???????????????????????????????? ??: ???????????????????????????????????? ?????: ??????????????????????????????????????????????????????????????·???(weblogic.Admin THREAD_DUMP)????????? ?????????BEA?????????????????????????????????????????????????????????????????????????????????? ????????“WebLogic??”!? WebLogic Server 12c????/??? ????????????? ???????????? ????????????????? ?????????????? ???????????? ????????????WebLogic Server???????????????????????????????????????????????WebLogic Server 12c?????????????????????????????????????????????????????????WebLogic Server 11g(10.3.6)???????????? ?????????Mac OS X???(???????)?IE 6?7??????????????? ??OTN??????????????????System Requirements and Supported Platforms for WebLogic Server 12c (12.1.1.x)?????????????Mac OS?????????????2012?8?2?????Mac OS X Snow Leopard????Java SE 7?????????? ???Internet Explorer(IE) 6.x??7.x???????????????????IE????????IE 8.x???????????? ????Web?????WebLogic Server?????????Web???·??????64?????????????(WebLogic Server??????????64?????)?????????WebLogic Server????????????????????????????????????????? ?RESTful????????? Java EE 6?JAX-RS????????????WebLogic Server 12c???????????????????????????????????? ?RESTful??????????? [????]-[??]-[??]?[RESTful??????????]?????????WebLogic Server??????????????????URL?????????????????????????? http(s)://:/management/tenant-monitoring/servers ???????servers??????clusters???applications???datasources??????????????????????????????????????????????? ????HTML??????JSON?XML???????????????????????????????????????????????????????????????????? ?JDBC????????(1):??????·???? ???????????????????????WebLogic Server??????????????????????????????????12c??Active GridLink for RAC???????????????????????????????????? 1??????????·?????????????????????[????]?????????[??????]????????????????????????????????????????????????????????????????????? <DOMAIN_HOME>/servers//logs/datasource.log ?????????????????????????????????????? ??????????????????????WLDF????????????????WebLogic Server 12c?????????????????????? ?JDBC????????(2):?????????? ????????????????[??]-[?????]???[????]?????????????????????????????????????????????????????????????????WebLogic Server 12c?????????????????????????????????????? ??????????????????????????????????WebLogic Server 11g(10.3.1)???1??????????????????????????????????????? ?JDBC????????(3):????????? WebLogic Server 12c??[??]-[?????]????????????????????[?????????]???1???????????????????????????????????????????????????????????????????????????????????????????????????????????????Oracle Database?????????????????????????? ErrorCode ????? 3113 ???????end-of-file???????? 3114 Oracle?????????? 1033 Oracle??????????????? 1034 Oracle??????? 1089 ?????????? - ?????????? 1090 ???????? - ?????????? 17002 I/O?? ?????????(1):?????/?????????????????? ??????????2?????? 1???WebLogic Server????????????????????????????????????????? -Dweblogic.management.username= -Dweblogic.management.password= ????????????ID???????????????? ?????????(2):SSL????Certicom?????? SSL?????Certicom(?????10.3.3?????)???????JSSE(Java Secure Socket Extension)????????????????????????????????????????? ??????????????????????????????? ????????????WebLogic Server?????????????????????????????????Java?????????·????2??????????Java????????????????nodemanager.properties?????????????StartScriptEnabled?????????false??true?????? ?????????????false?????????????WebLogic Server??????????????????true??????????????startWebLogic???????????????WebLogic Server??????????????startWebLogic???????????????????????????????????????????????????????????????? ???/???????(1):setDomainEnv???????????????? ??/?????????????“?????·???”????????????????????????????2???? 1??setDomainEnv?????????????????????????????32???JDK????????Perm????????????? ?WebLogic Server 11g(10.3.5) MEM_PERM_SIZE_64BIT="-XX:PermSize=128m" MEM_PERM_SIZE_32BIT="-XX:PermSize=48m" ... MEM_MAX_PERM_SIZE_64BIT="-XX:MaxPermSize=256m" MEM_MAX_PERM_SIZE_32BIT="-XX:MaxPermSize=128m" ?WebLogic Server 12c(12.1.1) MEM_PERM_SIZE_64BIT="-XX:PermSize=128m" MEM_PERM_SIZE_32BIT="-XX:PermSize=128m" ... MEM_MAX_PERM_SIZE_64BIT="-XX:MaxPermSize=256m" MEM_MAX_PERM_SIZE_32BIT="-XX:MaxPermSize=256m" ???/???????(2):stopWebLogic??????shutdown.py????????? ??/???????????2????stopWebLogic??????????????shutdown.py??????????????????????????????ID/????????????????????????shutdown.py??????????????WebLogic Server 11g(10.3.3)?????????????ID????????????????????WebLogic Server 12c???????? ????????????? ?????????????/??? ???????????/?????????????? ???KernelMBean????UseConcurrentQueueForRequestManager?????????????????????????????[????]--[??????]-[??]?[?????·???????????????]??????????????????????????????????????????MBean???????????????????????????????????????????????????????????????????????????????????????????(???)? ??1???Windows?????????beasvc.exe????wlsvc.exe????????????????????????wlsvc _???????BEA????????????????(???)? ????WLST???????Jython???????????????????2.1??2.2.1????????(???11g??2.2.1???????)???????????????……?(???)? ???????WebLogic Server 12c???????????????????????/????????????????????????????????????????WebLogic Server?????????WebLogic Server????????????Facebook?????????WebLogic!??????????????

  Read the article

• Key Promoter for NetBeans

  - by Geertjan

  Whenever a menu item or toolbar button is clicked, it would be handy if NetBeans were to tell you 'hey, did you know, you can actually do this via the following keyboard shortcut', if a keyboard shortcut exists for the invoked action. After all, ultimately, a lot of developers would like to do everything with the keyboard and a key promoter feature of this kind is a helpful tool in learning the keyboard shortcuts related to the menu items and toolbar buttons you're clicking with your mouse. Above, you see the balloon message that appears for each menu item and toolbar button that you click and, below, you can see a list of all the actions that have been logged in the Notifications window. That happens automatically when an action is invoked (assuming the plugin described in this blog entry is installed), showing the display name of the action, together with the keyboard shortcut, which is presented as a hyperlink which, when clicked, re-invokes the action (which might not always be relevant, especially for context-sensitive actions, though for others it is quite useful, e.g., reopen the New Project wizard). And here's all the code. Notice that I'm hooking into the 'uigestures' functionality, which was suggested by Tim Boudreau, and I have added my own handler, which was suggested by Jaroslav Tulach, which gets a specific parameter from each new log entry handled by the 'org.netbeans.ui.actions' logger, makes sure that the parameter actually is an action, and then gets the relevant info from the action, if the relevant info exists: @OnShowingpublic class Startable implements Runnable {    @Override    public void run() {        Logger logger = Logger.getLogger("org.netbeans.ui.actions");        logger.addHandler(new StreamHandler() {            @Override            public void publish(LogRecord record) {                Object[] parameters = record.getParameters();                if (parameters[2] instanceof Action) {                    Action a = (Action) parameters[2];                    JMenuItem menu = new JMenuItem();                    Mnemonics.setLocalizedText(                            menu,                             a.getValue(Action.NAME).toString());                    String name = menu.getText();                    if (a.getValue(Action.ACCELERATOR_KEY) != null) {                        String accelerator = a.getValue(Action.ACCELERATOR_KEY).toString();                        NotificationDisplayer.getDefault().notify(                                name,                                 new ImageIcon("/org/nb/kp/car.png"),                                 accelerator,                                 new ActionListener() {                            @Override                            public void actionPerformed(ActionEvent e) {                                a.actionPerformed(e);                            }                        });                    }                }            }        });    }} Indeed, inspired by the Key Promoter in IntelliJ IDEA. Interested in trying it out? If there's interest in it, I'll put it in the NetBeans Plugin Portal.

  Read the article

• Mac OS X Server Open Directory does not push Software Update settings to clients

  - by joxl

  I have an Xserve G5 running Mac OS X Server 10.5.8 configured as an Open Directory master. I have also enabled and configured Software Update service on the machine. The SUS is configured to serve Tiger, Leopard and Snow Leopard clients (see http://discussions.apple.com/message.jspa?messageID=10297359#10297359) The clients bound to the OD are a variety of Mac's running OS X 10.4, 10.5 or 10.6. In Workgroup Manager, I have created 3 machine groups for each client OS. Each group is configured with a custom SUS URL, and the managed client computers are members accordingly (see http://discussions.apple.com/thread.jspa?messageID=10493154#10493154) My problem is that the server pushes the SUS settings to some of the client machines, but not all. When I first configured all this stuff on the server (a few weeks ago) I was closely monitoring a few of the client machines to confirm that they received the custom settings. I noticed that some of the clients (10.4/5/6 alike) seemed to get the settings immediately, others didn't show the new settings until after a reboot. As I said, results are mixed across OS's, but some clients will not "sync" at all. My immediate thought was to unbind/rebind the problematic machines. I did this on several client computers with no success. For example, today I was working on one of the Tiger clients. I noticed it was not pointed at my local SUS, so I checked the OD binding; it was fine. Just to be sure I unbound the machine. Next, I checked WM and confirmed the computer record was gone. I noticed the machine group still had a residual (broken?) member from the unbound client; I manually removed this. Finally, I re-bound the client to OD and re-added the machine to it's correct group in WM. Unfortunately, the client still pings apple's SUS for updates. Just to play it safe I rebooted the client, but to no avail, it will not see my local SUS. To confirm that there is nothing wrong with the server, or the client's connection to it, forcefully pointed the machine at my SUS: sudo defaults write /Library/Preferences/com.apple.SoftwareUpdate CatalogURL "$LOCAL_SUS_URL" and the machine successfully updated off my local server. Great, successful updates, but problem not solved. I've done exhaustive reading on discussions.apple.com (not saying I read everything, I'm just saying I have read a lot) without a good answer. The discouraging thing is that a lot of OD problems I've read about only result in the sysadmin completely reinstalling the server, or OD, or some other similarly heavy-handed operation. At this point, I am not willing to go that route. I still have hope that I can find the reason for this flaky behavior. If anyone can point me in a helpful direction it would be much appreciated. EDIT: Indeed, some files are being pushed to the client: # from client machine: $ sudo find /Library -type f -name com.apple.SoftwareUpdate.plist /Library/Managed Preferences/com.apple.SoftwareUpdate.plist /Library/Managed Preferences/username/com.apple.SoftwareUpdate.plist /Library/Preferences/com.apple.SoftwareUpdate.plist A few weeks ago, prior to my (previously mentioned) modifications, the SUS was still running "stock". Which meant it could not serve SL (10.6) machines. At that time, the Software Update settings were setup in WM under User Groups. This didn't make any sense because some users work on multiple machines with different OS's. Before creating Machine Groups in WM, I deleted all the SU settings from the User Group Preferences. This just makes the whole thing more confusing, because when I see a file here: /Library/Managed Preferences/username/com.apple.SoftwareUpdate.plist I assume it's still remaining from the "old" settings, because I wouldn't think a Machine Setting belongs there. Despite all the com.apple.SoftwareUpdate.plist hanging around under the Managed Preferences, why does the client machine still call home to Apple and not my SUS? # on client machine: $ date Tue Jan 25 17:01:46 EST 2011 $ softwareupdate --list Software Update Tool Copyright 2002-2005 Apple No new software available. switch terminals... # on server: $ tail -n1 /var/log/swupd/swupd_access_log 10.x.x.x - - [25/Jan/2011:15:54:29 -0500] XXXX POST "/cgi-bin/SoftwareUpdateServerStats" 200 13 ... Notice the date of the client softwareupdate and the latest access to the SUS server; the server never heard a peep from that client.

  Read the article

• Can connect to Samba server but cannot access shares?

  - by jlego

  I have setup a stand-alone box running Fedora 16 to use as a file-sharing and web development server. Needs to be able to share files with a PC running Windows 7 and a Mac running OSX Snow Leopard. I've setup Samba using the Samba configuration GUI tool. Added users to Fedora and connected them as Samba users (which are the same as the Windows and Mac usernames and passwords). The workgroup name is the same as the Windows workgroup. Authentication is set to User. I've allowed Samba and Samba client through the firewall and set the ethernet to a trusted port in the firewall. Both the Windows and Mac machines can connect to the server and view the shares, however when trying to access the shares, Windows throws error 0x80070035 " Windows cannot access \SERVERNAME\ShareName." Windows user is not prompted for a username or password when accessing the server (found under "Network Places"). This also happens when connecting with the IP rather than the server name. The Mac can also connect to the server and see the shares but when choosing a share gives the error "The original item for ShareName cannot be found." When connecting via IP, the Mac user is prompted for username and password, which when authenticated gives a list of shares, however when choosing a share to connect to, the error is displayed and the user cannot access the share. Since both machines are acting similarly when trying to access the shares, I assume it is an issue with how Samba is configured. smb.conf: [global] workgroup = workgroup server string = Server log file = /var/log/samba/log.%m max log size = 50 security = user load printers = yes cups options = raw printcap name = lpstat printing = cups [homes] comment = Home Directories browseable = no writable = yes [printers] comment = All Printers path = /var/spool/samba browseable = yes printable = yes [FileServ] comment = FileShare path = /media/FileServ read only = no browseable = yes valid users = user1, user2 [webdev] comment = Web development path = /var/www/html/webdev read only = no browseable = yes valid users = user1 How do I get samba sharing working? UPDATE: Before this box I had another box with the same version of fedora installed (16) and samba working for these same computers. I started up the old machine and copied the smb.conf file from the old machine to the new one (editing the share definitions for the new shares of course) and I still get the same errors on both client machines. The only difference in environment is the hardware and the router. On the old machine the router received a dynamic public IP and assigned dynamic private IPs to each device on the network while the new machine is connected to a router that has a static public IP (still dynamic internal IPs though.) Could either one of these be affecting Samba? UPDATE 2: As the directory I am trying to share is actually an entire internal disk, I have tried to things: 1.) changing the owner of the mounted disk from root to my user (which is the same username as on the Windows machine) 2.) made a share that only included one of the folders on the disk instead of the entire disk with my user again as the owner. Both tests failed giving me the same errors regarding the network address. UPDATE 3: Not sure exactly what I did, but now whenever I try to connect to the share on the Windows 7 client I am prompted for my username and password. When I enter the correct credentials I get an access denied message. However I did notice that under the login box "domain: WINDOWS-PC-NAME" is listed. I believe this could very well be the problem. Any suggestions? UPDATE 4: So I've completely reinstalled Fedora and Samba now. I've created a share on the first harddrive (one fedora is installed on) and I can access that fine from Windows. However when I try to share any data on the second disk, I am receiving the same error. This I believe is the problem. I think I need to change some things in fstab or fdisk or something. UPDATE 5: So in fstab I mapped the drive to automount in a folder which works correctly. I also added the samba_share_t SElinux label to the mountpoint directory which now allows me to access the shares on the Windows machine, however I cannot see any of the files in the directory on the windows machine. (They are there, I can see them in the fedora file browser locally) UPDATE 6: Figured it out. See answer below

  Read the article

• What steps can you take to ensure sane build environments when compiling software?

  - by Chris Adams

  Hi guys, I've been stuck with a compilation problem when building a standardised virtual machine on CentOS 5.4, and I'm in the dark here as to a) why this error is occurring, and b) how to fix it, and in the hope that someone else stumbles across this problem too, I'm hoping someone can help me find the solution here. I'm getting a configure: error: newly created file is older than distributed files! error when trying to compile Ruby Enterprise like below when I try to run the installer, and the solutions offered to on the forums (of checking the tine, and touching the files to update the time associated with them) don't seem to be helping here. What steps can I take to work out what the cause of this problem? [vagrant@vagrant-centos-5 ruby-enterprise-1.8.7-2009.10]$ sudo ./installer Welcome to the Ruby Enterprise Edition installer This installer will help you install Ruby Enterprise Edition 1.8.7-2009.10. Don't worry, none of your system files will be touched if you don't want them to, so there is no risk that things will screw up. You can expect this from the installation process: 1. Ruby Enterprise Edition will be compiled and optimized for speed for this system. 2. Ruby on Rails will be installed for Ruby Enterprise Edition. 3. You will learn how to tell Phusion Passenger to use Ruby Enterprise Edition instead of regular Ruby. Press Enter to continue, or Ctrl-C to abort. Checking for required software... * C compiler... found at /usr/bin/gcc * C++ compiler... found at /usr/bin/g++ * The 'make' tool... found at /usr/bin/make * Zlib development headers... found * OpenSSL development headers... found * GNU Readline development headers... found -------------------------------------------- Target directory Where would you like to install Ruby Enterprise Edition to? (All Ruby Enterprise Edition files will be put inside that directory.) [/opt/ruby-enterprise] : -------------------------------------------- Compiling and optimizing the memory allocator for Ruby Enterprise Edition In the mean time, feel free to grab a cup of coffee. ./configure --prefix=/opt/ruby-enterprise --disable-dependency-tracking checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... configure: error: newly created file is older than distributed files! Check your system clock This is a virtual machine running on virtualbox, and the time of the host and the virtual machine are identical, and up to date. I've also tried running this after updating time with an ntp-client, so no avail. I tried this after reading this post here of someone having a similar problem [vagrant@vagrant-centos-5 ruby-enterprise-1.8.7-2009.10]$ date Tue Apr 27 08:09:05 BST 2010 The other approach I've tried is to touch the top level the files in the build folder like suggested here, but this hasn't worked either (an to be honest, I'm not sure why it would have worked either) [vagrant@vagrant-centos-5 ruby-enterprise-1.8.7-2009.10]$ sudo touch ruby-enterprise-1.8.7-2009.10/* I'm not sure what I can do next here - the problem seems to be the bash configure script that returns this error error: newly created file is older than distributed files!, at line :2214 { echo "$as_me:$LINENO: checking whether build environment is sane" >&5 echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; } # Just in case sleep 1 echo timestamp > conftest.file # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` if test "$*" = "X"; then # -L didn't work. set X `ls -t $srcdir/configure conftest.file` fi rm -f conftest.file if test "$*" != "X $srcdir/configure conftest.file" \ && test "$*" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken alias in your environment" >&5 echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken alias in your environment" >&2;} { (exit 1); exit 1; }; } fi ### PROBLEM LINE #### # this line is the problem line - this is returned true, sometimes it isn't and I can't # see a pattern that that determines when this will test will pass or not. test "$2" = conftest.file ) then # Ok. : else { { echo "$as_me:$LINENO: error: newly created file is older than distributed files! Check your system clock" >&5 echo "$as_me: error: newly created file is older than distributed files! Check your system clock" >&2;} { (exit 1); exit 1; }; } fi the thing that makes this really frustrating is that this script works sometimes, when the VM has been running for an hour or so it works, but not at boot. There's nothing I see in the crontab that suggests any hourly tasks are run that might change the state of the system enough make a difference to this script working. I'm totally at a loss when it comes to debugging beyond here. What's the best approach to take here? Thanks

  Read the article

< Previous Page | 414 415 416 417 418 419 420 421 422 423 424 425  | Next Page >