Search Results

Search found 12007 results on 481 pages for 'usb speed'.

Page 418/481 | < Previous Page | 414 415 416 417 418 419 420 421 422 423 424 425  | Next Page >

  • Throughput and why do ISPs sell too much bandwidth?

    - by jonescb
    I hope the question made sense how I worded it. :) I've been wondering, maximum theoretical bandwidth is measured as RWIN/RTT (Window size / round trip time) Source 1 and Souce 2 So if a major city only 100 miles away gives me a ping of 50ms, and I have the default 64kb TCP window size then my maximum throughput will be 12.5Mb/s. Everything further away would give me a higher ping and therefore a lower throughput. Is there any reason to buy something like FiOS with a 50Mb/s or greater connection? Will you ever be able to reach that kind of speed? I know you can increase the TCP window size to increase throughput, but it has to be at both ends which is a deal breaker because you can't control the server. I'm assuming other network protocols like UDP aren't quite as affected by latency as TCP is, but how much of overall network traffic does non-TCP make up vs TCP. Am I just misguided about how throughput works? But if the above is correct, then why should a consumer like me buy way more bandwidth than can be realistically used. Maybe the only reason is for downloading multiple things at once, or one thing from multiple servers/peers?

    Read the article

  • Print job leaves queue but document isn't printed

    - by midnightstar
    I'm dealing with an HP Deskjet F380 All-in-One printer. It's connected via USB to a desktop running Windows 7 Enterprise x64. If I attempt to print something like a web page or a word document, the print job will show up in the print queue and the printer would stir. By stir, I mean, it would seem to prepare itself to print. However, the print job would then leave queue (I'm thinking the computer sees it as completed) and the printer would never actually print anything. However I went into Printers and Devices under the Windows start menu, into printer properties, and print a test page, the test page would print out successfully. I attempted to uninstall and re-install the printer drivers for the printer, but the printer would continue the same behavior afterwards. I also connected the printer to another computer and the printer will print just about anything. I also checked to make sure that the computer the printer needs to be connected to was update to date as far as the OS. The machine is fully up to date. I played with the way the computer handles printer spooling. Under the printer properties, under the "Advanced" tab, I had the print job print directly to the printer. In all these instances, the same behavior continues. I've restarted the printer spooling service. I've also gone under C:\Windows\System32\spool\PRINTERS and deleted files that were sitting in the folder. I have ran SFC /scannnow and the system found no errors in the system's integrity. I had the computer and printer make a cold reboot individually. The only lead I really have going for me is that since the printer prints on other PCs, I can only assume that there is something wrong with the way the PC is configured.

    Read the article

  • How to disable my laptop's defective keyboard?

    - by Kolink
    I have an Alienware M17x R2, and after a couple years of use I started having problems with the keyboard: Intermittently, and without warning or apparent cause (even if I'm not touching the computer), the S key (and more recently the D key) will start firing incessant signals until I hit the offending key. I've been using a USB keyboard, which is conveniently exactly the right size to fit over the built-in keyboard without touching any buttons. However, even as I type the defective keyboard will fire its stream of signals. I have contacted Dell about this, twice in fact. The first time, I was just bluntly told that they don't ship replacement keyboards. The second time I was told that they did, but they were out of stock and they would contact me when they were in stock again. They haven't contacted me since. I can't seem to work out which device to disable in the device manager. Here's a screenshot of what I have: None of the keyboard devices have "Disable" in their context menus, only "Uninstall"... so you'll understand if I'm hesitant to try anything myself. Any advice on how to fix this?

    Read the article

  • How can I extract data from Toshiba Satellite with a dead Windows installation?

    - by msanford
    I've got a Toshiba Satellite (unknown model number but bought early 2010) running Windows Vista which throws a kernel error on boot. We don't have the restore/recovery CD any more to restore the Windows partition. I have managed to boot to a Live CD version of Ubuntu 10.10 and have mounted the internal hard drive (which takes nearly 8 minutes). I suspect that the hard drive is malfunctioning, however, because copy tasks of even 30 megs of data to an attached and mounted USB flash drive takes over an hour, and some files are mysteriously inaccessible (not a permissions issue). When browsing folders, it takes many minutes to populate the folder window even with a single tiny file. During the copy tasks, the hard disk sounds like it tries to sleep several times in rapid succession, then continues accessing, it sounds, at full throughput. I initially tried using scp (from the shell) to copy data but I encountered the same local problems. I don't know the S.M.A.R.T. status of the hard disk, either. Is there a more effective way of going about recovering the data on the internal disk, assuming that I can't use a recovery CD and am too cheap to bring it in (for now, at least)?

    Read the article

  • Touchpad scroll slow and jumpy

    - by IR
    I have a laptop with a synaptics touchpad running on win7 x64. When i use the scrolling region of the touchpad in some applications, for example in Visual Studio 2008, Notepad and Windows Media Player 12, the scroll is very slow. If i pull the edge of the touchpad slowly the program will scroll one row at a time(regardless of the number of lines-settings in the mouse configuration). If i pull the edge quickly though, the program will instantly jump like 20 rows making it way too fast. In some applications, like Firefox, the scrolling work as expected. Changing the scrollspeed-setting for the touchpad does not help. If you make it slower it doesn't do the 20-row jump but then it's horribly slow and if you try to make it faster it will do the jumps all the time. I have tried both synaptics generic drivers and the "special" drivers that HP provides but they both have the same problem (except that the generic one can't adjust the scrolling speed, even though that didn't help anyway). With windows generic drivers the scrolling region doesn't even work. Other mice i've tried with scrollwheel work as they should do.

    Read the article

  • Laptop keyboard stopped functioning properly

    - by galdikas
    Basically today out of blue my laptop keyboard started acting up. For example I press "s" but I see "`s" on the screen. Some keys don't work at all. And the weird thing is it keeps changing, in a sense that for example in the morning I press "s" and I get "`s", then few hours later "s" works correctly.. but pressing some other key output multiple characters. Then sometimes it spontaneously will start outputting some character onto any input field that is available as soon as I click on it to gain focus. And it will just keep on going and going, as if I keep a button pressed (which I don't). At first I thought this was a virus, but I have a dual boot of Windows 7 and Ubuntu, and I get same problem on both. I even tried to boo live CD, and still had same problem. Anyone had this kind of problem? It's a Toshiba Satellite c660-258. It is around year old, but quite well kept. Never spilled anything on it, or dropped it. And my wireless USB keyboard works perfectly on it (appart from the spontaneous character inputs, which I can stop by hitting NUM LOCK key)

    Read the article

  • How to use non-free drivers during debian install

    - by blokeley
    I'm trying to install debian stable using unetbootin. The install process fails with "network autoconfiguration failed", probably due to the ethernet driver not working. My Lenovo U350 has a Broadcom BCM57780 which does not seem to be supported out-of-the-box: there are various bug reports here, here and here, but I don't know if the fix has made it into debian (6) stable. One discussion says that you have to use an ethernet driver from the firmware-linux-nonfree package. I'm not sure that this is correct because the BCM57780 is not in the list of drivers in firmware-linux-nonfree. The specific question tree is: Is BCM57780 supported in debian stable? If so, what could be wrong? Should I install debian unstable instead? If not, do I need to use firmware-linux-nonfree during installation and, if so, how do I do this? Please note: I've used ubuntu and debian loads in the past but please post line-by-line guidance rather than some cryptic abbreviation of any instructions. Thanks in advance for any help. Updates: Debian stable with non-free drivers did not work. Debian unstable (free drivers only) did not work. Tried loading firmware-iwlwifi_0.28_all.deb from another USB stick to get wireless working rather than BCM57780. The .deb file was found but the network configuration still failed! That's it, I'm giving up. Unfortunately I'll use ubuntu even though the Unity user interface will be very unstable for the next couple of years :(

    Read the article

  • Windows 7 misses keystrokes from internal keyboard after hibernation (on Acer Aspire 5820)

    - by ron
    I face a very strange symptom on my Acer Aspire laptop (with the factory default Win7 install and divers. Windows update running). After waking the computer from hibernation, it is a pain to type, since on average 5-10 keypresses are missing per 100 presses, using the laptop's keyboard. Steps to reproduce: 1) Power off 2) Power on, wait for system to become usable 3) Open notepad, for 5 times do hit 10x the same character. This gives a similar pattern of 50 chars total: xxxxxxxxxxyyyyyyyyyyaaaaaaaaaassssssssssdddddddddd 4) Optionally repeat. Everything is fine this far. 5) Hibernate. 6) Power on and resume. 7) Repeat steps 3)-4). This time approximately 3-5 character will be missing from each 50 characters. What I ruled out: putting to Sleep or just Locking and resuming from there does not cause problem battery / AC usage does not matter net connection does not matter running processes seem to be the same before and after hibernation key press speed doesn't really matter. For the test I use a nominal 3-5 strokes/second beat. plugging in an external USB keyboard works fine, but the built-in one still misbehaves What could be the problem? How could I diagnose if the keypresses arrive in, but get swallowed at some point? (maybe some nasty keyboard handler hook misbehaves?). Update: It seems that pushing the PowerSmart button and toggling to power saving state fixes the problem. Also, toggling it again back to the original state keeps it fixed. So this may be a fine workaround, but is not a conforming solution.

    Read the article

  • How can I create a macro that acts on a relative reference rather than an absolute reference to cell A1?

    - by Bruce
    I have a master rent statement in an Excel 2007 (macro enabled) spreadsheet that shows all tenants in rows with columns formed by the months. Each tenant then has a separate rent statement sheet like the one below that pulls the data through from the master rent statement and all I do then is to copy the last 4 columns to the right and add them to the right, just renaming the month labelled as ‘rent due’ with the current month and then hiding the previous last 4 columns to the left so that the statement always shows the previous month's activity and the amount due for the current month: I used a macro to speed up the creation of these statements, but then found that in some cases the result was wrong and needed major correction because the macro use absolute references i.e. its starting position was relative to cell A1 whereas some of my rent worksheets commence from a different column and in some cases from a different column and a different row. I have tried recording the macro with 'Use relative references' but when trying to use the macro it only gets part way through its operation before it stops and the message appears: Run time error '1004' Application defined or object defined error with the option to End or Debug or go to Help and then I'm stuck as I don't know how to debug and work in VBA or understand what has gone wrong. I want to record a single macro that always remains relative to the last 'Total Due' column heading (in the sample, it’s cell FF3 but on another worksheet could be cell GA26) and thus enables me regardless of where on the worksheet the rent statement is placed to add through my recorded macro a further four columns with updated dates and a repositioned 'Total Due' summary (in the sample in cells FE23 and FF23). The contents of cells FE23 and FE22 are always the same number of rows from the 'Sample Rent Statement, Service Charge and Sub Total' rows. I've searched on the web and in the help files of Excel 2007 but have been totally stumped by this, so currently I have to re-record a quantity of macros each month to cover all of the permutations of the worksheets in my Excel rent workbook, which is starting to become pointless in terms of saving time. Does someone know a solution to this problem please?!

    Read the article

  • 2.6.9 Kernel on virtual server (non upgradable) - any expected problems?

    - by chris_l
    Hi, I'm considering to rent a virtual server (for me personally). The product I'm currently looking at offers IMO fair pricing, very good hardware etc. The only problem is, that I won't be able to do an upgrade to a newer kernel than 2.6.9 (running Debian Etch). Also, I can't install my own kernel modules. (The server runs with Virtuozzo, so as far as I understand it, it just does some chroot instead of a real virtualization (?)) I want to run GlassFish, Postgres, Subversion, Trac and maybe some other things on it. It will also have to employ a firewall, and provide OpenSSL for https. Ideally, it would also be able to do AIO (asynchronous IO), which could speed up some server I/O. Should I expect problems with that old kernel version, in conjunction with the software I want to install (I'd like to use current versions of the software)? One thing I already found out, is that you can't do everything with iptables, since some kernel modules are missing/things are not build into the kernel. GlassFish v3 appears to run fine at first glance. I was able to test the server for a few hours. Installing my whole setup wasn't feasible in that time, but what I can say is, that it's amazingly fast for an entry-level vserver, especially hard disk and network performance (averaging at ca. 400MBit/s). So if the kernel won't be a problem, I'd really like to take it. Thanks, Chris PS Exact kernel version: 2.6.9-023stab051.3-smp

    Read the article

  • Ubuntu's garbage collection cron job for PHP sessions takes 25 minutes to run, why?

    - by Lamah
    Ubuntu has a cron job set up which looks for and deletes old PHP sessions: # Look for and purge old sessions every 30 minutes 09,39 * * * * root [ -x /usr/lib/php5/maxlifetime ] \ && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 \ -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir \ fuser -s {} 2> /dev/null \; -delete My problem is that this process is taking a very long time to run, with lots of disk IO. Here's my CPU usage graph: The cleanup running is represented by the teal spikes. At the beginning of the period, PHP's cleanup jobs were scheduled at the default 09 and 39 minutes times. At 15:00 I removed the 39 minute time from cron, so a cleanup job twice the size runs half as often (you can see the peaks get twice as wide and half as frequent). Here are the corresponding graphs for IO time: And disk operations: At the peak where there were about 14,000 sessions active, the cleanup can be seen to run for a full 25 minutes, apparently using 100% of one core of the CPU and what seems to be 100% of the disk IO for the entire period. Why is it so resource intensive? An ls of the session directory /var/lib/php5 takes just a fraction of a second. So why does it take a full 25 minutes to trim old sessions? Is there anything I can do to speed this up? The filesystem for this device is currently ext4, running on Ubuntu Precise 12.04 64-bit. EDIT: I suspect that the load is due to the unusual process "fuser" (since I expect a simple rm to be a damn sight faster than the performance I'm seeing). I'm going to remove the use of fuser and see what happens.

    Read the article

  • Low 'Burst Rate' from SATA drive in HDTune?

    - by UpTheCreek
    I recently upgraded my laptop's v slow hard drive to a seagate momentus 7200. Everything is working fine, but I'm a bit confused by these benchmark results: The burst rate is significantly less than the Maximim transfer rate, and not much higher than the normal minimum (if you ignore the spikes). What's going on here? On the HDtune website it defines Burst Rate as: ...the highest speed (in megabytes per second) at which data can be transferred from the drive interface (IDE or SCSI for example) to the operating system. Which begs some questions... e.g. if this is the highest, then how did the bechmarking tool record the 103MB/sec maximum? And if this really is the true maximum, then where is the bottleneck? The laptops SATA interface is on an Intel 82801GBM southbridge controller. When I check in hardware manager, I see that it's driver is iaStor.sys from 2005. Maybe that's the issue? I'll look for a newever version, but any insights would be appreciated. Thanks UPDATE: Acorting to this page on the HDTune website... An important parameter of the test is the Burst Rate. This value should always be higher than the maximum transfer rate. A lower value is usually an indication of a configuration problem. So what might be the configuration problem?

    Read the article

  • How to fix Windows 7 device removal notification loop

    - by Barry Kelly
    Bit of an odd one this. One of our PCs is getting caught in a loop some time after being turned on, usually after a USB storage device has been attached - sometimes an iPod, sometimes a GPS. Specifically, Windows Explorer starts showing a drive icon and letter (E:, as of right now) for the System partition (the small hidden one at the start of the boot drive). Then, the icon disappears. Then it reappears again. And disappears. It does this very quickly, at what looks like maybe 50 times a second. CPU usage in this loop is also very high; averages about 66%. This machine has an i7 920 CPU, which is quad core with hyperthreading; so this usage rate works out to about 5 100% busy threads, along with whatever normal idle load is (particularly Task Manager itself). Inspecting with Process Explorer shows that the device removal notification infrastructure has gone berserk. The threads in system service processes (i.e. apart from Windows Explorer) which are using all the CPU power relate to device notification. The Disk Management MMC snap-in also fails to run when the loop starts. The only way to break the loop, it seems, is to reboot the machine. Anyone seen anything similar to this, and know of a way to fix it? Machine details: Windows 7 x64, fully patched i7 920, 12GB RAM Intel SSD 80GB (X25-M, I believe; not G2) 2TB 5.2K disk for bulk storage AMD HD 5870 Further hardware details await. I'm going to go through and update all drivers I can find.

    Read the article

  • HDD dead forever???

    - by Roberto
    Yesterday I turned on my computer and it couldn't boot. I found out the hd (320GB SATA Seagate Momentus 7200.3 for notebook) was broken, it couldn't be recognized by the BIOS. I have another of the same hd, so I exchanged the boards. I found out that there is a problem on its board since my good hd didn't work. But the broken hd doesn't work with the good board as well: it can be recognized but when I insert a Windows Instalation DVD it says the hd is 0GB. I put it in a case and use it in another computer via USB, and but it doesn't show up in the "My Computer". I used a software to recover files called "GetDataBack for NTFS", it recognized the hd but with the wrong size (2TB). I try to make it read the hd but it get an I/O error reading sector. It tries to read, the hd spins... So, since I'm using a good board on it, the problem seems to be internal. Is there anything someone could do recover the files from it?

    Read the article

  • How To Completely Move Users/Program Files/Program Files (x86)/ProgramData (Folders) To Another Partition(s) On Windows 8?

    - by Enigma83
    I am attempting to move folders Users Program Files Program Files (x86), ProgramData (at the root of the C drive) to at least 2 other partitions, preferably on a fresh install. I have read that there are methods for doing this post-install, but it seems like it would be a bit more tedious to do things that way. I want to move the 2 Program Files folders to another partition on the same HDD, and Users/ProgramData will go to yet another partition on same HDD. I have done a bit of research on this, read up on some things that involved booting into Audit Mode, using the RoboCopy command to copy folders via booting into my Windows 8 USB drive, creating NTFS junctions/symbolic links, Registry edits, as well as accomplishing this automatically by creating an auto-attend file which Windows Setup processes automatically before the user is ever booted in for the 1st time. I tried this morning and now have a basic installation in which programs like Internet Explorer fail to open, certain files can't be found/opened (even if I click on them directly), an example is Regedit. Also, I can't run the Command/DOS (CMD) prompt as Administrator (or otherwise, as any other user), can't activate the real Administrator account or open any of the Administrative Tools (despite having added them to my Start Screen). So far I have only tried RoboCopy-ing Program Files and Program Files (x86) so far, creating junction points for them, and editing the Registry in the relevant locations. This is what I'm left with now. I also found the following blog article which describes how to do this for Windows 7 So, where should I go from here and where can I find more information? And how can this be done without disabling the Metro apps, which I've read will stop working if you move ProgramData. Once I have everything moved, where do I install programs to? Do I tell them to install to C:\Program Files\Program Files (x86) or to the junctioned/symbolic-linked partition/drive? I plan to test in VMware virtual machines from here on until things are working correctly, while using a baseline default install for daily tasks.

    Read the article

  • How to fix a damaged/corrupted NTFS filesystem/partition without losing the data on it?

    - by Gareth
    I was going to install Fedora 15 along side my Windows 7 Starter on my Acer Apire One D255E and at some point during the resizing of the NTFS partition (the one with Windows on it) the setup failed. Now I cannot access this partition from any OS. When I tried to access it from a Fedora install running on a USB flashdrive I get this error: Error mounting: mount exited with exit code 12: Failed to read last sector (452534271): Invalid argument HINTS: Either the volume is a RAID/LDM but it wasn't setup yet, or it was not setup correctly (e.g. by not using mdadm --build ...), or a wrong device is tried to be mounted, or the partition table is corrupt (partition is smaller than NTFS), or the NTFS boot sector is corrupt (NTFS size is not valid). Failed to mount '/dev/sda5': Invalid argument The device '/dev/sda5' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around? It doesn't make a lot of sense to me but I was really hoping it would to someone and they can give me a way to restore the partition without losing everything on it (I have a lot of important notes from various classes on there)? Cheers.

    Read the article

  • MicroSD card getting corrupted for no good reason

    - by ChaosR
    I recently bought an MicroSD card online. It's a Sandisk 16GB class 2. However, it has a nasty problem. Every time I fill it with my data, the fat tables get corrupted. I've tried reformatting it, blanking it, doesn't seem to solve the problem. I have tried windows and linux (ubuntu), both have the problem. I've used my usb microsd readers, and even tried putting it in my phone and putting data on it from there. All have this problem. Now the really odd thing is, besides the corrupted file tables, no programs can find anything wrong with the hardware. I've tried both chkdisk and "badblocks -w", neither give any type of error. Now I don't know if the actual data gets corrupted, or if its just filesystem tables. What happens is that one or more folders start showing a load of chinese-charred (random UTF8 symbols I suppose) folders and files, and it is impossible to do anything with those. All the other data (outside of the corrupted folders) seems fine. I've tried to test it, and the problem doesn't seem to show up until I fill the disk upto about 3~4GB. After that I can still access the data. But as soon as I eject/safely remove/unmount it, the bad things happen somehow. Next time I plug it in, the folders I most recently wrote to (but sometimes also the folders I wrote the time before last time to) are all gibberish. Does anybody have any clue what might be going on here?

    Read the article

  • Recovering a broken NTFS filesystem?

    - by OverTheRainbow
    A much-needed Windows Update broke a Vista laptop that was running fine until then: After booting up, Windows displays "Please wait..." but it never goes anywhere. I waited for a couple of hours, there is a bit of disk activity, but it didn't work out in the end. I booted with the Vista DVD, chose "Repair your computer" which said that there was nothing wrong :-/ Next, I booted it up with a Linux USB keydrive, and ran Gparted 0.8.1 (which includes ntfsresize v2011.4.12AR.4 libntfs-3g) which displays a bunch of warnings for the NTFS partition where the Vista system is located such as: ntfs_mst_post_read_fixup: magic: 0x00000000 size: 1024 usa_ofs: 0 usa_count: 65535: Invalid argument Record 16 has no FILE magic (0x0) Next, I ran ntfsfix /dev/sda2, which said: Mounting volume... OK Processing of $MFT and $MFTMirr completed successfully. NTFS volume version is 3.1. NTFS partition /dev/sda2 was processed successfully. Next, I rebooted Vista, which did a CHKDSK, before rebooting. But I'm still getting nowhere with "Please wait..." Before I copy the user's data to another host and reinstall Vista from a DVD, does someone know what I could try? Thank you. Edit: In case someone else has the same issue... After the BIOS, hit F8 and choose "Repair your computer", followed by "Toshiba HDD Recovery". In addition to a 1,5GB partition labelled "WinRE", the hard disk contains a second partition labeled "Data" from which the application will fetch a system image and reinstall it in the "Vista" partition. Make sure you copy your data out of the system partition before doing this.

    Read the article

  • Windows 7 misses keystrokes from internal keyboard after hibernation (on Acer Aspire 5820)

    - by ron
    I face a very strange symptom on my Acer Aspire laptop (with the factory default Win7 install and divers. Windows update running). After waking the computer from hibernation, it is a pain to type, since on average 5-10 keypresses are missing per 100 presses, using the laptop's keyboard. Steps to reproduce: 1) Power off 2) Power on, wait for system to become usable 3) Open notepad, for 5 times do hit 10x the same character. This gives a similar pattern of 50 chars total: xxxxxxxxxxyyyyyyyyyyaaaaaaaaaassssssssssdddddddddd 4) Optionally repeat. Everything is fine this far. 5) Hibernate. 6) Power on and resume. 7) Repeat steps 3)-4). This time approximately 3-5 character will be missing from each 50 characters. What I ruled out: putting to Sleep or just Locking and resuming from there does not cause problem battery / AC usage does not matter net connection does not matter running processes seem to be the same before and after hibernation key press speed doesn't really matter. For the test I use a nominal 3-5 strokes/second beat. plugging in an external USB keyboard works fine, but the built-in one still misbehaves What could be the problem? How could I diagnose if the keypresses arrive in, but get swallowed at some point? (maybe some nasty keyboard handler hook misbehaves?). Update: It seems that pushing the PowerSmart button and toggling to power saving state fixes the problem. Also, toggling it again back to the original state keeps it fixed. So this may be a fine workaround, but is not a conforming solution.

    Read the article

  • Receiving and processing SMS messages through a script?

    - by ShankarG
    I am attempting to setup a system to receive and process SMS messages automatically. The system is intended for use in a context (an unfunded migrant workers' union in India) where both finances and sysadmin skills are extremely constrained (I would be the only person, in the near future, who would be administering the system). The intention is to make some functions - registration of members, generation of ID cards, communication of alerts and other information - easier. However, for receiving and sending SMS, I have not been able to find any email to SMS or other kind of gateway that functions in India. Perhaps there is one (edit: apparently Clickatell does have an India service, but the prices appear astronomical). If not, can one rely on a USB mobile modem (such as those provided by many mobile providers in India)? It seems like, with utilities such as gammu or bitpim, SMS operations on such a modem could be scripted. Is this actually feasible, though? Thanks in advance for your thoughts and suggestions. edit: Original first question removed since the two questions had little to do with each other. The original first question has been asked separately here

    Read the article

  • How can I change the default program installation directory in Windows 7?

    - by Max
    Windows 7 is installed on my C drive, which is quite small. I am very tired of instructing new programs to put their files on my larger D drive during installation; I would like to change the default drive. This article says that you can use a registry hack, but I am giving Microsoft the benefit of the doubt and naively assuming that a configuration option exists somewhere. It's 2010... do I really have to hack my registry to make a simple tweak like this? Also, there's a ServerFault question that explains how to move the "Users" directory and create a symlink, which could also work. However, at the moment I have some apps in C:\Program Files, some apps in C:\Program Files (x86), and some apps in the corresponding folders on D:\, so it would be a hassle. Also, my small OS boot drive is a 10k RPM WD Raptor, and I feel like that probably gives a speed boost to apps installed on it that need to read & write to their directories a bunch. I wonder if it actually matters.

    Read the article

  • Using a degrading corrupted hard disk with a brand new one. Is this ok?

    - by EApubs
    My old 500 GB hard drive started to give bad sectors. Its slowly going down. So, I bought a new 1TB Seagate drive. I first attached the 500GB drive as the first primary drive and installed Windows. I want Windows boot loader to be placed in the old drive so it won't conflict with the Linux system. But the actual Windows system (Including the C drive) is placed on my new hard drive. After this, I attached the new drive as the primary and installed Linux. Now if I want to re install windows, I can do it without any issues by simply setting the old drive as the primary. So the Linux system will be untouched. But is it a good idea to set things like this? Will the old degrading drive have an impact on the new one? The old drive is slower than the new one. Won't I be able to get the maximum speed out of the new drive even when its used to install everything (including the OS)? PS : When I ran the Windows Experience Index, I was using the old drive as the primary. Did it got the hard drive ratings from the old drive? What if I run it now with the new drive as the primary?

    Read the article

  • Minecraft server hosting hardware specifications [on hold]

    - by Andrew Wright
    I am planning on purchasing a server to rent off Minecraft game servers, largely to friends. I am planning on purchasing a 128GB RAM server to save on colocation costs (as I am likely to need more than 32GB and would have to rent 2U of space...) I am hoping for some advice about the processing power needed to deal with this level of RAM. The servers will be run in a shared environment on linux in a VM to make backups easier. The server I have in mind is dual CPU. I have been considering at the low end dual Xeon E5-2609V2 Quad-Core 2.5Ghz, and at the high end dual Xeon E5-2650V2 Eight-Core 2.6Ghz. The difference between these is 6.4 GT/s and 8 GT/s and £3000 for the lower spec server, £4300 for the higher spec. I was hoping I could get advice about whether it is worth paying for the extra/higher speed processor or if I would be wasting my money? Thank you for any help - I appreciate that this is not directly related to professional system administration.

    Read the article

  • Grub Installation Failed: Fatal Error ... now what I do?

    - by eklavya
    I know there are some threads that touch this but I feel I have done something uniquely stupid. hence the post and plea for help. I am a beginner @ Linux. So I have a PC with a HDD (hard disk drive) and SSD (solid state drive) It was running Linux Mint /dev/sda1 - HDD Partition 1 - 2 TB (mounted this is /home /dev/sda2 - HDD Partition 2 - 1 TB (separate back up drive, i was backing up files to this) /dev/sdb1 - SSD Partition 1 - 100 GB (OS) /dev/sdb2 - SSD Partition 2 - 20 GB (Swap) The operating system was Linux Mint and was installed on the /dev/sdb1 i.e the solid state drive. I had partitioned off the sda into 2 TB and 1TB and presented the 2 TB as the /home to the OS. Anyway last night I decided to make a return to Ubuntu via the path of Elementary OS. Everything went fine with the install until it stated that GRUB installed failed and this was a Fatal error (no kidding I said). No I am stuck. I have definitely done something wrong and don't know what it is... My biggest pain is the files on the /dev/sda2. I want to save these before I try something drastic like wiping off the /dev/sda completely. So I have the following questions... Can I use a liveCD USB to save these files ? I can see the /dev/sda2 but was unable to access the files in the liveCD last not least ... how do I fix the main issue here. Why could the OS not install GRUB 2b... why is my SSD the /dev/sdb ... and not /dev/sda. Does that have something to do with it that my master boot record sits on the HDD /dev/sda and not /dev/sdb

    Read the article

  • Route all traffic of home network through VPN

    - by user436118
    I have a typical semi advanced home network scenario: A cable modem - eth A wireless router (netgear n600) eth and wlan A home server (Running ubuntu 12.04 LTS, connected over wlan) A bunch of wireless clients (wlan) Lying around I have anoher cheaper wlan router, and two different USB wlan NIC's that are known to work with Linux. ACTA struck. I want to route ALL of my WAN traffic through a remote server through a VPN. For sake of completition, lets say there is a remote server running debian sqeeze where a VPN server is to be installed. The network is then to behave so that if the VPN is not operative, it is separated from the outside world. I am familiar with general system/network practices, but lack the specific detailed knowledge to accomplish this. Please suggest the right approach, packages and configurations you'd use to reach said solution. I've also envisioned the following network configuration, please improve it if you see fit: ==LAN== Client ip:10.1.1.x nm:255.0.0.0 gw:10.1.1.1 reached via WLAN Wlan router 1: ip: 10.1.1.1 nm:255.0.0.0 gw: 10.10.10.1 reached via ETH Homeserver: <<< VPN is initiated here, and the other endpoint is somewhere on the internet. eth0: ip:10.10.10.1 nm: 0.0.0.0 gw:192.168.0.1 reached via WLAN Homeserver: wlan0: ip: 192.168.0.2 nm: 255.255.255.0 gw: 192.168.0.1 reached via WLAN ==WAN== Wlan router 2: ip: 192.168.0.1 nm: 0.0.0.0 gw: set via dhcp uplink connector: cable modem Cable Modem: Remote DHCP. Has on-board DHCP server for ethernet device that connects to it, and only works this way. All this WLAN fussery is because my home server is located in a part of the house where a cable link isnt possible unfortunately.

    Read the article

< Previous Page | 414 415 416 417 418 419 420 421 422 423 424 425  | Next Page >