Search Results

Search found 14975 results on 599 pages for 'garnet os'.

Page 419/599 | < Previous Page | 415 416 417 418 419 420 421 422 423 424 425 426  | Next Page >

• switch duplicates packets and forward in two route

  - by sami

  there is a network including a router, two hosts and a switch which connects hosts to router. i have a virtual machine on my system. the network adapter is set to act as bridge. so the virtual machine and real OS are my 2 hosts on different LAN. they use one network card and are connected to a switch. when each of host send a packet to the other one, the switch duplicate the packet and forward it to both router and the other host. how can I solve the duplicate packet problem? Thanks.

  Read the article

• Windows XP , HP , IntelInside Trobelshooting

  - by Jamil Hneini

  My Windows XP PC has stopped booting. On start up, before Windows boots a screen appears saying: Windows Could Not Boot: Could Not Find or Corrupted file <Windows root>\Sytem32\Hal.dll Please Reinstall the file... From that I understand that I have to reinstall the OS but my computer is so old that I have lost the backup and recovery disk. My Computer's Info: 32Bit Computer Pentium 4 Windows XP Service Pack 2 HP History: My Computer has 4 hard drives 2 internal 40 GB drives (C And D) 2 external 8GB drives (E And F) Additional Info: I need the files inside C And E The computer reads my flash drive as a hard drive (8.45GB)(I have never booted while my USB pluged in while I was troubleshooting) With some test I discovered that the C drive wasn't detected by the computer I have already configured the boot order of BiOS I have Set The SATA to IDE The Question: I have a setup for windows 8 32 bit how can I boot from my USB to run that setup? If that isn't the proper way to handle this problem please tell me the proper way.

  Read the article

• Anything to share a printer from 32-bit to 64-bit Windows?

  - by marklam

  I've got a printer which only has 32-bit drivers, so it's installed on a 32-bit machine (XP). I need it to appear as a printer (with duplex control etc) on a 64-bit machine (Vista). I can't just share it using Windows printer sharing because the 64-bit client requires drivers to connect to it. There's no 64-bit driver for a similar printer that works (using the new port named \\server\printername). I've tried the ghostscript approach but that doesn't seem to help with the duplex control etc. Printeranywhere doesn't support 64-bit OS yet. Is there another way to do this?

  Read the article

• Need a good quality bitmap rotation algorithm for Android

  - by Lumis

  I am creating a kaleidoscopic effect on an android tablet. I am using the code below to rotate a slice of an image, but as you can see in the image when rotating a bitmap 60 degrees it distorts it quite a lot (red rectangles) – it is smudging the image! I have set dither and anti-alias flags but it does not help much. I think it is just not a very sophisticated bitmap rotation algorithm. canvas.save(); canvas.rotate(angle, screenW/2, screenH/2); canvas.drawBitmap(picSlice, screenW/2, screenH/2, pOutput); canvas.restore(); So I wonder if you can help me find a better way to rotate a bitmap. It does not have to be fast, because I intend to use a high quality rotation only when I want to save the screen to the SD card - I would redraw the screen in memory before saving. Do you know any comprehensible or replicable algorithm for bitmap rotation that I could programme or use as a library? Or any other suggestion? EDIT: The answers below made me think if Android OS had bilinear or bicubic interpolation option and after some search I found that it does have its own version of it called FilterBitmap. After applying it to my paint pOutput.setFilterBitmap(true); I get much better result

  Read the article

• Dualboot Asus n56v (ubuntu / win 7 x64) - ubuntu doesn't detect partition table made by windows

  - by user76439

  I have an Asus n56v and I've got troubles installing Ubuntu 12.04 x64. I already have installed Windows 7 x64! The hard drive is: Hitachi HTS547575A9E384 My problem: The installation program doesn't recognize the already existing partitions and is offering only options where there are partitions. Can someone help me out? Is this an ACPI/IDE conflict, missing driver or conflict with Windows 7? (I'm not an expert on Linux, only working sometimes with it.) I now tried out some options concerning EFI with a GTP-table. Everything worked but I wasn't able to fix a dual boot (Windows boot loader) nor with GRUB2. The laptop is still having a BIOS, but is able to boot DVDs/CDs in EFI-mode. Now I try to avoid EFI and GTP using the old windows MBR style. I reinstalled Windows, so far no problem. When I want to try to install Ubuntu, it doesn't detect the already existing partition table. It is just showing me an empty space for the whole disk. Other threads like Ubuntu 12.04 does not see windows already install on my computer (dual installation) don't help me out. os-prober shows me a correct result. I don't know how to deal with gdisk as shown in Installer doesn't detect existing partition table/windows 7 partition. I have 750GB for the whole disk. I'm using: 90GB for Windows reserved partition + system partition, 500GB for data and the rest should be for SWAP and linux-system. How can I make Ubuntu detect the partition table?

  Read the article

• Tool for creating system image from DOS (should be USB bootable) ..?

  - by Ahmad

  I want to know if there's any decent tool which can be used to create the system image from DOS .. What I specifically want to do is to put the program in my FAT32 formatted USB, then boot the target computer from the USB so that the tool runs, and then it should be able to create a complete system image of the entire system, and store it on the USB itself .. Please note that I can ONLY do this from boot time because of other limitations .. I cannot go into any OS to do it from there .. So I need tools which can do this at boot time from DOS ..

  Read the article

• How do I lower idle cpu usage in ubuntu linux? Gnome or KDE Variants

  - by Jasen

  My question comes from a kde desktop currently, but it also happens with the gnome instance. When just sitting there, with only the cpu monitor widget running. no open windows, no background processes other than the desktop, my cpu is at ~20%. I wanna know how to fix this, and possibly get better performance out of it. When running my windows side, the cpu will sit at zero, and i generally load new programs about 400ms faster. With windows 7 being as slow as it is, this is not acceptable. and the widget is only set to check every 500ms, so im almost completely sure its not the widget. My system is a Gateway nv 53 amd 2.0 ghz turion with 4 gb of installed ram, and 500 gb hd. both linux and windows are 64 bit. average ram use on either system is about 1.4 gb for just the os

  Read the article

• Installing Ubuntu next to Windows XP

  - by jess

  I have iso image for Ubuntu 11.0.4 on a CD. My OS is windows XP. I have 3 partions c, E and F. Windows is installed on C, and F has data. E is empty drive. Now, after I start installation , I choose the third option. Then click forward and I am shown three figures -- /dev/sda1 52427(total)/50931(used) /dev/sda5 52427(total)/3221(used) -- surprised, since it should be empty. I had used wubi to install earlier but have uninstalled. /dev/sda5 215206(total)/37545(used) Now, it means I need to choose sda5. Now how should I go about creating 3 partions for /(root), /home and /swap. Click edit partion and give size for each of them?

  Read the article

• which command run in cron returns nothing

  - by Zárate

  Hi there, I've written a little utility in haXe + Neko that needs to execute some GIT commands. To avoid hardcoding the path to the GIT executable I'd like to use the which command to find out where it is. Everything works as expected when running manually from the console, but not when the the app runs on a cron job. I'm aware of the restricted environment (here or here) when you run a script using cron, but still surprised this doesn't work: /usr/bin/which git >> /home/user/git.txt The text file is created but the content is empty. Again, when run from the console it works as expected. Any ideas? I'm running OS X Leopard, if that helps. Thanks : ) Juan

  Read the article

• after install python 2.7.3 yum is broken

  - by user468587

  i installed libxml2-2.9.0 and libxslt-1.1.27 then yum is broken any yum command that i ran i got the result of : There was a problem importing one of the Python modules required to run yum. The error leading to this problem was: No module named yum Please install a package which provides this module, or verify that the module is installed correctly. It's possible that the above module doesn't match the current version of Python, which is: 2.4.3 (#1, Jan 21 2009, 01:11:33) [GCC 4.1.2 20071124 (Red Hat 4.1.2-42)] If you cannot solve this problem yourself, please go to the yum faq at: http://yum.baseurl.org/wiki/Faq then i thought python version is way too old and install python 2.7.3 and install it from scratch, after some wrong trials it got worse and worse, now when i run 'python -V' i got version 'Python 2.7.3', when i run '/usr/bin/python -V', it returned 'python-2.4.3-24.el5', and no matter what i did the yum is still broken with that message. how can i get yum back? my os is: linux 2.6.18-164.11.1.el5 x86_64 GNU/Linux

  Read the article

• How do I get the Windows 7 installer onto a USB drive?

  - by Rod

  I'm having trouble installing Windows 7 onto my old laptop. The problem appears to be the laptop's DVD-ROM no longer seems to work. Sucks. So, I'm trying to figure out how to get a bootable USB with my Windows 7 DVD info onto it. I found this link here on superuser.com: http://superuser.com/questions/66948/place-a-bootable-iso-on-a-usb-drive That looks good, except for the detail about making the USB bootable. It said that the OS you're making it bootable on must be the same as the machine you're going to be installing it on. I can't do that. The machine I would make it bootable from is a 64-bit version of Windows 7. The target machine is 32-bit. So, how's this going to work?

  Read the article

• Any limitations for putting an SSD in a Mini? How fast would an external HDD be via Firewire? Is Ser

  - by Cyrcle

  I'm considering getting a Mini for web programming. I do a lot of text searches so I want to put a SSD in it. Does the Mini have any limitations that might effect the performance of a SSD? I'm trying to decide if I should get a Mini Server. I'd like to be able to have two internal drives so one can be SSD for OS and the code I'm working on, and the other can be my storage drive. However, I'm not sure if I'll be using the extra functionality of the server edition OSX or not, so I'm reluctant to pay the $200 premium. In a "regular" Mini I could put the SSD internal and use an external big drive, but would the external drive be fast enough via Firewire? Thanks in advance for any info.

  Read the article

• Ubuntu 14.04 says insufficient memory in my /boot memory alocation while updating

  - by Aravind Dollar

  I am new to Linux platform. I just tried installing Ubuntu alongside windows but allocated only 200 mb to the /boot partition which is not recommended. Now Ubuntu software update keep on insists me no enough space. What should I do? Is there any way to increase my /boot partition without removing the total OS? Or should I completely uninstall Ubuntu and put it back? Please anyone suggest me over this issue. I have no idea what to do. And please be elaborate, as I am new to Linux environment.

  Read the article

• Network? or router? problem

  - by Robert H Mercer

  I have two computers networked through a Netgear WG914 router which is connected to an Ipstar satellite modem via the RG47 LAN connector. The main computer is running Windows 7 Pro 64bit and the secondary computer is running Windows 7 Home Edition 32bit. On occasion there is a loss of internet connection usually on the main computer, often followed by a loss on the secondary comuter. Not, however, always the case. Windows troubleshooter, naturally, is about as much use as a politician in government.......NONE. There appears to be no problem with the ISP bad as it is and often the connection will be remade without any help from me. The difference in the OS's is not of any relevance since I had this problem before I changed over to Windows 7. Not being a nerd when it comes to networking I wonder if anyone has any constructive suggestions.

  Read the article

• Make BIND use DHCP DNS as backup

  - by cainmi

  I run BIND locally on my OS X machine, to enable wildcard Apache vhosts, which requires setting the DNS server for all network interfaces to 127.0.0.1. This works great, but means when I am on a network which uses an internal DNS server to route special (i.e. .companyname) URLs to a server on the network, the lookup fails. I tried adding both 127.0.0.1 and the DHCP provided DNS server, but this doesn't work either. Is there a way to make BIND use the DHCP DNS server for requests it cannot resolve locally?

  Read the article

• objects don't snap in browser window

  - by gavin

  I've recently upgraded from XP Pro to Windows7 Pro - In XP Pro (and previous OS versions) you could move Thumbnails around in a window and they would snap/shuffle up/re-order themselves and be viewable as a slide show - it was unbelievably useful - I used it EVERY day, Windows 7 doesn't do this? Is there some setting I can change or is it just not there anymore? I use it for organising photo libraries for archiving - I haven't found any other way of doing this that suits my work. Does anyone know a way to get this feature back? Thanks

  Read the article

• if a usb pen drive has 64349 cylinders, is it damaged?

  - by Andrew S

  I have a 4Gb USB pen drive that I'm trying to format with FAT32. When I run fdisk, it gives me this message: The number of cylinders for this disk is set to 64349. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) I've tried deleting the partition table, creating new partitions, etc, but they never work. Sometimes I can write to the drive the first time I use it after formatting it, but then it becomes read-only in both Windows and Linux. I've tried this on multiple computers. Am I doing something wrong, or is the drive reporting an incorrect number of cylinders? Is the drive itself likely to be corrupted, and is there anyway to fix this under Windows Vista or Linux? Thanks

  Read the article

• RAID1: Migrate HHD to SSD?

  - by OMG Ponies

  My current workstation uses an Adaptec 5805, with Win2008 mirrored between two 72 GB (10K?) savvio drives. My question is if there's a way to migrate the mirror to use SSDs - I've been looking at 90GB Corsair Force (Sandy Bridge) to replace the existing setup. If it's possible, without installing the OS fresh. If I replaced the mirrored drive with an SSD, would the array sync the drives? Then I could promote the SSD mirror to be the primary, and use the second SSD as the mirror. That'd be too easy... Or should use Ghost to get an image of the existing setup, apply it to the SSD for a new mirror to be setup on?

  Read the article

• How do you passthrough native SATA drives to a guest on ESXi?

  - by John

  I have ESXi 4.0 running on an Intel DX58S0 Mothboardboard with an Intel Core i7 930 processor. VT-d is also enabled. I have three drives in the system, drive 0 is used for ESXi. Drive 1 and 2 contain data from an older machine and show up under the "Storage Adapters" section in configuration. I would like to allow a guest machine to access the data on these drives (as nativly as possible). I have enabled passthrough of the motherboard's built in SATA controller (Intel/Marvell 88SE6121 ). This controller shows up in my guest OS, but the guest shows no drives aside from the normal virtual drive. I have tried a Linux guest and Windows7. I have also configured the host machine to try IDE/RAID/ACHI modes for the SATA controller. Any ideas how I can configure one of my guests to get at the raw data on these drives?

  Read the article

• Getting error in internet shortcut

  - by MJM

  I create a file by url extension and type following text into in(its url is sample): [Internet Shortcut] URL=http://en.wikipedia.org/wiki/WebDAV In some case i gettin this error:"The Target "" of this Internet Shortcut is not valid. Go to the internet shortcut property sheet and make sure the target is correct." (for sample if in path or name of target file exist space character) my default browser in Firefox. I want have a internet shortcut that open in all browser and on al os. What can I fixed it problem? (Sorry if I am using the wrong terminology or grammar, I am self taught english language)

  Read the article

• From which plex am I booted from on raid?

  - by rumburak

  I have a server with mirrored boot volume. It is software raid 1 in Windows Server 2008 R2. I do not have physical access to the server. I am looking for a way to check which disk is a boot drive. I need a way to check it from os. How can I do that ? EDIT: I know how to do that, but I dont think its proper way. From diskpart I can break mirror: select volume 0 break disk=0 And Windows will only allow me to do that on not current boot disk. I want to check which one is boot without breaking mirroring.

  Read the article

• How do I open multiple windows when Outlook 2010 starts?

  - by Eric

  OS: Windows 7 64-bit App: Outlook 2010 32-bit Server: Exchange 2010 I'd like to modify Outlook's default startup behavior so that it shows both my Inbox and Calendar when I click my shortcut. I use both of them all day, and know how to just right-click the calendar and select "Open in New Window." I run my inbox on one screen and my calendar on another. I also configured my calendar to be the folder that opens by default when I start Outlook so I don't miss early appointments, but if I could somehow have BOTH open in two separate windows, that would be awesome. Is there a command-line interface or something that can accomplish this? Thanks in advance.

  Read the article

• I can't get my Macbook Pro to print to an IP addressable printer

  - by Pieter

  Running Macbook Pro OS X 10.6.3 Accessing an HP OfficeJet 5610 plugged in the USB port of a US Robotics router. I tried several combinations of: Protocol: Internet Printing Protocol (IPP) Line Printer Daemon (LPD) HP JetDirect (socket) Address: http://192.168.1.10:1631/printers/HP5610 192.168.1.10:1631/printers/HP5610 http://192.168.1.10:1631 192.168.1.10:1631 192.168.1.10 ... Driver: HP OfficeJet 5600 Series Whenever I try to print, it fails while saying "connected to printer" or "Printer is busy...zill try again in X seconds" Both Windows 7 and Windows XP computers on the network can successfully access this printer, identifying it as "HP5610 on http://192.168.1.10:1631/" I tried clearing all tasks and printers (ctrl-click in the menu), and resetting it to (socket, http://192.168.1.10:1631/printers/HP5610, HP5600 series) but to no success.

  Read the article

• ubuntu 12.04 - keep getting "Server not found" for some websites

  - by android developer

  ever since last week , i've noticed that many websites cannot be accessed , and it doesn't matter if i use firefox or chromium as a web browser . as an example of such a website is: http://tutorials-android.blogspot.co.il/2011/05/layout-animation-in-android.html all i get is a "Server not found" error page . sometimes after a few refreshes it works just fine . i've checked it on a windows OS machine that is connected to the exact same LAN network , and the website is shown just fine . i've also checked the /etc/hosts file and it doesn't contain anything suspicious . what is going on? how can i fix it?

  Read the article

• How to change hybrid disk to basic disk in windows 7?

  - by Marco

  I created a partition E and then deleted the partition. After that I extended my partition C (where OS was installed) to take the space. My partition C became hybrid drive. My hp notebook does not have DVD rom and the notebook only came with an recovery image (I also have a paragon disc image). My computer has some problems now and I want to recover it by either the factory format or the paragon disc image. However, none of them works. I know it is because my disc has become hybrid disk. My question is how to fix the dynamic disk problem?

  Read the article

< Previous Page | 415 416 417 418 419 420 421 422 423 424 425 426  | Next Page >