Search Results

Search found 15383 results on 616 pages for 'home automation'.

Page 419/616 | < Previous Page | 415 416 417 418 419 420 421 422 423 424 425 426  | Next Page >

• Server problem (duh)

  - by j-t-s

  Sorry the title couldn't be more specific. I installed Abyss Web Server. I'm running Windows XP Home Edition and I have Wireless Mobile Broadband internet. I used to be able to access (and other people on other networks) my site by entering my ip address in the browser, but after I formatted, and the installed abyss web server again, this does not work anymore. There are no errors. I CAN visit my own site by entering my ip address BUT anybody else can't do the same, it just says "connecting" in the browser's statusbar and it never changes. I have consulted the docs and have found no help. Google hasn't helped with this problem either. Can somebody please help? Thank you :)

  Read the article

• Server problem (duh)

  - by j-t-s

  Sorry the title couldn't be more specific. I installed Abyss Web Server. I'm running Windows XP Home Edition and I have Wireless Mobile Broadband internet. I used to be able to access (and other people on other networks) my site by entering my ip address in the browser, but after I formatted, and the installed abyss web server again, this does not work anymore. There are no errors. I CAN visit my own site by entering my ip address BUT anybody else can't do the same, it just says "connecting" in the browser's statusbar and it never changes. I have consulted the docs and have found no help. Google hasn't helped with this problem either. Can somebody please help? Thank you :)

  Read the article

• Lagging digital tv over ethernet

  - by Steve

  I have a HD Home Run TV over ethernet device, which connects the aerial to my router, and from there the router connects to my PC over about 15m of 100Mbps ethernet cable. The TV output lags every second. It does not do so for a computer much closer to the router. It is odd to me that the network rate is around 7Mbps on a 100Mbps cable. I am not downloading or streaming anything else on the affected computer. Is this lag caused by the speed of the cable, the length of the cable, or interference on the cable? I am considering swapping the ethernet cable with shielded ethernet cable.

  Read the article

• How Security Products Are Made; An Interview with BitDefender

  - by Jason Fitzpatrick

  Most of us use anti-virus and malware scanners, without giving the processes behind their construction and deployment much of a thought. Get an inside look at security product development with this BitDefender interview. Over at 7Tutorials they took a trip to the home offices of BitDefender for an interview with Catalin Co?oi–seen here–BitDefender’s Chief Security Researcher. While it’s notably BitDefender-centric, it’s also an interesting look at the methodology employed by a company specializing in virus/malware protection. Here’s an excerpt from the discussion about data gathering techniques: Honeypots are systems we distributed across our network, that act as victims. Their role is to look like vulnerable targets, which have valuable data on them. We monitor these honeypots continuously and collect all kinds of malware and information about black hat activities. Another thing we do, is broadcast fake e-mail addresses that are automatically collected by spammers from the Internet. Then, they use these addresses to distribute spam, malware or phishing e-mails. We collect all the messages we receive on these addresses, analyze them and extract the required data to update our products and keep our users secure and spam free. Hit up the link below for the full interview. How To Properly Scan a Photograph (And Get An Even Better Image) The HTG Guide to Hiding Your Data in a TrueCrypt Hidden Volume Make Your Own Windows 8 Start Button with Zero Memory Usage

  Read the article

• Erlang node acts like it connects, but doesn't [migrated]

  - by Malfist

  I'm trying to setup a distributed network of nodes across a few firewalls and it's not going so well. My application is structured like this: there is a central server that always running a node ([email protected]) and my co-worker's laptops connect to it on startup. This works if we're all in the office, but if someone is at home, they can connect to the masternode, but they fail to connect to the other nodes in the swarm. I.E., erlang fails to gossip correctly. To correct this, I've change epmd's port number and changed the inet_dist_listen ports to a known open port (1755 and 7070 respectively). However, something fishy is going on. I can run net_adm:world() and it reports that it connects to master node, but when I run nodes() I get an empty array. Same with net_adm:ping('[email protected]'). See: Eshell V5.9 (abort with ^G) ([email protected])1> net_adm:world(). ['[email protected]'] ([email protected])2> nodes(). [] ([email protected])3> net_adm:ping('[email protected]'). pong ([email protected])4> nodes(). [] ([email protected])5> What's going on, and how can I fix it?

  Read the article

• Ubuntu 12.04LTS stuck at login mouse and keyboard not responding

  - by user169954

  I have Ubuntu 12.04LTS installed on a dual-booted machine (i5 dual core 8G ram) and it's been working fine, but today for some reason when I logged out and tried to log back in it is stuck at the login page, i.e. the mouse and the keyboard are not responding. The mouse is stuck at the top left corner of my screen, and I can do nothing but to turn the machine off. (I have been using logitech wireless mouse and keyboard.) I can not access the virtual console (Alt-F1 or Cntrl-Alt-F1) either! Here is what I have tried so far: Verified it is not a H/W problem since the mouse and keyboard work fine with windows7 Booted with ubuntu installation dvd and ran trial mode and mouse and keyboard worked fine. Tried bypassing the login screen by booting into recovery mode and editing tty1.conf, but to no avail. I moved .Xauthority .profile and .bashrc from my $HOME to another location so my login would proceed completely by system defaults. But this did not help From recovery mode commandline used to dpkg-reconfigure to switch between gdm and lightgdm. This did not help either. By the way, when in recovery mode as root from command line I mount the filesystem, all apps work fine. Python is Ok, octave is ok, vi is ok etc. I have a feeling if I could only bypass the login screen, and automatically get into the desktop, I will be ok. But I haven't been able to accomplish this either. I desperately need help please. Thank you in advance. Update: So I tried to switch to lightdm by dpkg-configure lightdm. This at least brings me up to the classical linux commandline login prompt but without a gui. Should I install startx? Should I install ubuntu-desktop?

  Read the article

• Video conferencing software that allows a participant to mute individual users

  - by Chris Dutrow

  Have a few people working in an office and then a few more people working from home. We would all like to video chat skype-style, but for the people in the office, everything that is said by someone in the same room "echos". The echo is because the hear it one time through the actual air, and then again through their headphones or speakers: Unsure of the best way to solve this problem, but one way seems to be to use an application that enables the user to mute audio from another participant. Then the people in the office could mute all audio from other people in the same room, thus removing the echo effect. Any suggestions or ideas? Thanks so much!

  Read the article

• OpenJDK6 At a Glance

  - by user9158633

  OpenJDK6 Quick Links Project:       Home Page  |  How to Contribute to OpenJdk |  Java SE 6 Spec Code:          Source Bundle Download  |  Mercurial Repositories: [.] , corba, hotspot, jaxp, jaxws, jdk, langtools Mailing List: [email protected]  |  Mail Archive  |  How to Subscribe Bloggers:     Joe Darcy (the founder and the first Release Manager)  |   Kelly O'Hair (current Release Manager) Blog Posts:  All Joe's OpenJDK 6 Posts  | Joe's FOSDEM Presentation Related Projects: IcedTea6  | OpenJDK 7 Important Notice: • Security fixes from Oracle will continue  through EOL of OpenJDK 6 train • EOL of OpenJDK 6 train will occur no sooner than July 2012 (one year after JDK 7 ships) OpenJDK 6 Releases Releases:  Release Process  |  Release Tools/Scripts Build Numbers  Release Engineer  Release Notes  Test Results  Change List  B01 - B22 Joe Darcy B22 Blog, src bundles B22 B22  B23 Kelly O'Hair B23 Blog, src bundles B23 B23  B24, and later Lana Steuck B24 Blog, src bundles B24 B24

  Read the article

• Cannot access the filesystems using LiveCD (LVM2,EXT2)

  - by ftkg

  I have to restore the /etc/passwd file I accidentally renamed in my Ubuntu Server, so I booted the machine using a LiveCD. Problem is, the system filesystem does not appear in Nautilus, under 'Devices'. Am I missing anything? ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000956dc Device Boot Start End Blocks Id System /dev/sda1 * 2048 499711 248832 83 Linux /dev/sda2 501758 625141759 312320001 5 Extended /dev/sda5 501760 625141759 312320000 8e Linux LVM ubuntu@ubuntu:~$ mount /cow on / type overlayfs (rw) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) /dev/sr0 on /cdrom type iso9660 (ro,noatime) /dev/loop0 on /rofs type squashfs (ro,noatime) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) tmpfs on /tmp type tmpfs (rw,nosuid,nodev) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) gvfs-fuse-daemon on /home/ubuntu/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ubuntu) ubuntu@ubuntu:~$ sudo blkid /dev/loop0: TYPE="squashfs" /dev/sda1: UUID="aad69790-198d-45bc-9ccd-e4cba7456914" TYPE="ext2" /dev/sda5: UUID="wbIDX7-RILL-VtFT-gX15-N1GJ-Yyfg-V8Oe5m" TYPE="LVM2_member" /dev/sr0: LABEL="Ubuntu 12.04 LTS i386" TYPE="iso9660" ubuntu@ubuntu:~$ cat /etc/fstab overlayfs / overlayfs rw 0 0 tmpfs /tmp tmpfs nosuid,nodev 0 0

  Read the article

• Broken characters in filenames only in some directories

  - by Kaivosukeltaja

  We have a web server running CentOS 5.8 that uses SVN for version control. When trying to switch to the latest revision, we got an error about the filenames of files in an upload directory: svn: Error converting entry in directory 'adm/emails/upload' to UTF-8 svn: Valid UTF-8 data (hex: 54 79) followed by invalid UTF-8 sequence (hex: f6 6b 69 72) Upon investigating, we noticed there were some files that had broken filenames: $ ls ~/public_html/adm/emails/upload/ Ty?el?m?trendit.csv Ty?kirja1.csv To get the update completed quickly, we simply mved the files into our home directory. Surprisingly, their filenames looked fine in their new location: $ ls ~/ Työelämätrendit.csv Työkirja1.csv After the update we moved them back to where they were and their filenames were broken again. What could cause this and how can we fix it? The system's locale is set to LANG=en_US.UTF-8.

  Read the article

• Serious error on first attempts to dual boot Ubuntu 14.04 with Win7

  - by beetle

  I downloaded Ubuntu 14.04 from the website which I saved to my desktop with WinRar. My trial with winrar had expired so I have now tried it with Active@Isoburner but I'm getting no further. I eventually got it burnt onto a DVD(4.7gb) and tried to boot from DVD and normally. Neither way works. It looks like its about to boot but then a message appears saying that a serious error has occurred...the disk drive for /tmp is not ready yet or not present...press I to ignore, s to skip or m for manual... At this point I'm lost and unsure what to do. My laptop Toshiba Equium A210-17I is over 5 or 6 years old. Available space on the Hard Drive is 24gb. 2gb RAM. It originally came with Windows Vista Home Premium edition but about a year ago or more a friend wiped it clean for me as I was having no end of problems with Vista. He installed Windows 7 Ultimate(which I don't have a disc for). How can I resolve this issue and get Ubuntu to boot up? Do I have to install a previous version of Ubuntu first? Any advice or help would be greatly appreciated. Kind regards. Beetle.

  Read the article

• Where should I go to learn about networking? [closed]

  - by Ollie Saunders

  I wonder if anyone could recommend resource or resources such as a good book that: explains how all the important protocols work and interact. I’m interested in those that are relevant in a typical home network and used over the Internet explains in detail how ADSL Internet connections work to the level of depth necessary so that I’m able to tweak and measure performance settings starts from the beginning but attempts to provide proper understanding rather than idiot-oriented steps to follow Basically, I’m interested in how these technologies work and tend to be implemented in hardware and software rather than “here’s what to do if…” I’m interested in Computer Networking by Andrew S. Tanenbaum and I wonder if anyone else has any experience with that title. It’s expensive but I could probably loan a copy for £3 from the library or so.

  Read the article

• How to increase signal/range of your Wi-Fi antenna-less repeater/booster over the network?

  - by kenorb

  I've BT Home Hub in the upper flat (2-3 walls behind) and I'm using WPS Wireless-N Wifi Range Router Repeater Extender in my flat where I'm using my laptop. These are antenna-less devices. Are there any life-hack tricks to increase signal/range of my repeater without buying the new more powerful repeater? I've tried already to move my repeater closer to the ceiling or putting the aluminium foil underneath, but it didn't help. Are there any methods, specific plates or materials which can boost the signal? Specification: Model: WN518W2 Frequency range: 2.4-2.4835GHz Wireless transmit power: 14 ~17 dBm (Typical) Wireless Signal Rates With Automatic Fallback: 11n: Up to 300Mbps(dynamic), 11g: Up to 54Mbps(dynamic), 11b: Up to 11Mbps(dynamic) Modulation Technology: DBPSK, DQPSK, CCK, OFDM, 16-QAM, 64-QAM Receiver Sensitivity: 300M: -68dBm@10% PER / 150M: -68dBm@10% PER / 108M: -68dBm@10% PER / 54M: -68dBm@10% PER / 11M: -85dBm@8% PER / 6M: -88dBm@10% PER / 1M: -90dBm@8% PER Product dimensions: 11 * 6 * 7cm

  Read the article

• Shooting Print Quality Pictures with a Camera Phone [Video]

  - by Jason Fitzpatrick

  Camera phones get a lot of grief for being underpowered but in this video tutorial the crew at SLR Lounge shows how basic technique and a good eye overcome all. Last year over at the photo blog FStoppers they put together a video showing off how you could use the iPhone as a fashion camera–essentially arguing that the camera wasn’t as important as the photographer. A lot of people said “Well yeah, but you had professional models and thousands of dollars in lighting equipment!” in reaction to the video. In turn the crew at SLR Lounge decided to make their own video showing that using only an iPhone camera and two reflectors (as well as an attractive but informal model). It of course helps to have some side kicks to help hold up your reflectors but the point still stands about modern camera phones being perfectly capable of good photos. The SLR Lounge iPhone Photo Shoot – A Follow Up Tribute to The FStoppers [YouTube] What is a Histogram, and How Can I Use it to Improve My Photos?How To Easily Access Your Home Network From Anywhere With DDNSHow To Recover After Your Email Password Is Compromised

  Read the article

• Systemd can't start script?

  - by TokyoMEWS

  I have a BASH-script I want to run on start up. My system is running systemd so I created a .service file with whith what I think is the neccessary information: [Unit] Description=My Script After=network.target [Service] ExecStart=/home/myscript.sh [Install] WantedBy=multi-user.target I used systemctl enable to 'register' it an rebooted. On boot I was told my script would be executed, but I could neither see any of the messages ECHO should display on screen nor did it write something to a file, according to what I had written in the script. Additionally, It does not start the application it's supposed to start. Systemctl status tells me that the script has run and exited successfully. Still, the script has no effect. If I run the script from a shell it works perfectly fine. Do any of you know what could be my problem?

  Read the article

• Sony Vaio: I can't type 'less and greater than' signs in TR keyboard layout

  - by Mehper C. Palavuzlar

  I have a strange trouble with my Sony Vaio VPCCW21FX. My laptop has a Turkish Q keyboard and I'm using TR keyboard layout on Windows 7 x64 Home Premium. The problem is, I cannot find a usual way to type less than or greater than signs unless I switch to EN keyboard layout. These signs are showed on the keyboard together with the Turkish letters "Ö" and "Ç", as you can see from the below photo of my laptop's keyboard. So, how can I type these signs without switching to EN keyboard layout? I tried Fn and Alt keys but it doesn't work. I need to use TR layout since I need Turkish letters while writing my documents and e-mails.

  Read the article

• I get regular power surges and my UPS ticks a lot due to a welding plant. Is this good or bad?

  - by EApubs

  In our home, there is a mechanic who often use a welding plant. When he use it, I think we get a power surge. My UPS ticks madly (not beep, it ticks). Sometimes, I even lose power to the keyboard. When typing, some keys get missing. 1) My question is, is it good for the computer? The UPS claimed to have surge protection. But isn't it working? What should I do to protect my PC? 2) The second question is, I also have a broadband router which is not connected to the UPS. Will it be effected?

  Read the article

• Best scripting language for project [on hold]

  - by Dave

  This is a subjective question, but I don't know where else to ask it. I'd appreciate it if someone could direct me to an appropriate scripting language for my project. I'm a little new at this so I'd appreciate any help. The project is a website that will display a list of photo subject groups (such as "nature" "people" "sports" etc) on the home page. The photos will all be in subdirectories of the main photo directory (photos) and each subject group will represent a subdirectory in photos. For example in directory photos there might be 3 subdirectories, "nature" "people" "sports" and in each of those subdirectories there will be the actual photos. The idea is that when the website owner wants to update/add/delete a subject group all he has to do is add, delete or update a subdirectory of the photos directory. This means, I think, that I need a scripting language that can read the directories and files in the website and then send a web page with the information in it. What is the simplest and easiest scripting language to do this in? Any ideas? Thanks

  Read the article

• What would cause a CMD window to open after windows starts?

  - by Carl B

  As of the past few weeks, when I start windows, A CMD window opens and stays open after all the programs and applications launch. I have just been exiting or closing the box, but I have been wondering what would cause it to open in the first place? I have checked to see what is in start up (and I have been looking for CMD or RUN) but I don't see anything out of the ordinary. How can I get this to stop? I have windows 7 Home premium 64.

  Read the article

• Lightweight, low cost enterprise backup solution

  - by Scott

  Looking for a backup solution primarily for Windows clients (XP/7), that will either back up to 2 different servers (1 on site, 1 off site - internet - can be our own server), or back up to 1 server and then we would need to somehow backup that server offsite/internet. By lightweight, I mean the backup client software should not eat up much memory and processor since some of the client machines are older. I am used to using Crashplan for home use - the pricing is nice for the amount of backup I get, and it works great / easy to install and get going - I can back up to my own machines locally and over the net. However, the price is going to be a little steep for enterprise level backup, 1500+ machines. Possibly ZManda and Bacula are good choices to consider? Are they light weight? Can the clients/agents be set to go over the net and/or multiple backup servers?

  Read the article

• Reg: Putty SSH Access

  - by gourav

  Dear all, I have a Linux based virtual server recently purchased. I need to transfer the files from local computer to my virtual server... I tried downloading the Putty. But there were no EXE files to install. i am using Windows XP at home. If possible, can i have to installer link. Do we need to know Linux compulsorily for using this Putty. And also is there any other tool which can be used by users who dont know linux commands. Please help.

  Read the article

• Apache 2 UserDir for only one VirtualHost

  - by dentarg

  Is it possible to enable the UserDir Directive for just one VirtualHost rather than have it on for all and then disable it (with "UserDir disable") for each VirtualHost you don't want it on? I have tried by putting this inside a <VirtualHost> and comment out everything in the global config (/etc/apache2/conf.d/userdir.conf). No luck though. <IfModule mod_userdir.c> UserDir public.www UserDir disabled root <Directory /home/*/public.www> AllowOverride FileInfo AuthConfig Limit Indexes Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec <Limit GET POST OPTIONS> Order allow,deny Allow from all </Limit> <LimitExcept GET POST OPTIONS> Order deny,allow Deny from all </LimitExcept> </Directory> </IfModule>

  Read the article

• Recommendation for a non-standard SSL port

  - by onurs

  Hey guys, On our server I have a single IP, and need to host 2 different SSL sites. Sites have different owners so have different SSL certificates, and can't share the same certificate with SAN. So as a last resort I have modified the web application to give the ability to use a specified port for secure pages. For its simple look I used port 200. However I'm worried about some visitors may be unable to see the site because of their firewalls / proxies blocking the port for ssl connections. I heard some people were unable to see the website, a home user and someone from an enterprise company, don't know if this was the reason. So, any recommendations for a non-standard SSL port number (443 is used by the other site) which may work for visitors better than port 200 ? Like 8080 or 8443 perhaps? Thanks!

  Read the article

• Why is purchasing Microsoft licences such a daunting task? [closed]

  - by John Nevermore

  I've spent 2 frustrating days jumping through hoops and browsing through different local e-shops for VS (Visual Studio) 2010 Pro. And WHS (Windows Home Server) FPP 2011 licenses. I found jack .. - or to be more precise, the closest I found in my country was WHS OEM 2011 licenses after multiple emails sent to individuals found on Microsoft partners page. Question being, why is it so difficult to get your hands on Microsoft licenses as an individual? Sure, you can get the latest end user operating systems from most shops, but when it comes to development tools or server software you are left dry. And companies that do sell licenses most of the time don't even put up pricing or a self service environment for buying the licenses, you need to have an hawk's eye for that shiny little Microsoft partner logo and spam through bunch of emails not knowing, if you can count on them to get the license or not. Sure, i could whip out my credit card and buy the VS 2010 license on the online Microsoft Shop. Well whippideegoddamndoo, they sell that, but they don't sell WHS 11 licenses. Why does a company make it so hard to buy their products? Let's not even talk about the licensing itself being a pain.

  Read the article

• EMEA OTN Virtual Technology Summit - Hands-On Learning

  - by Thanos Terentes Printzios

  The Oracle Technology Network (OTN) is excited to invite you to our first Virtual Technology Summit. EMEA – Thursday July 10th / 9am to 1pm BST / 10am – 2pm CET / 12pm to 4pm MSK / GST - Register Now Learn first hand from Oracle ACEs, Java Champions, and Oracle product experts, as they share their insight and expertise on using Oracle technologies to meet today’s IT challenges. This interactive, online event offers four technical tracks, each with a unique focus on specific tools, technologies, and tips in these focus areas. Java – Big Trends and Technologies – Java lets you mine Big Data, build robust apps with HTML5, JavaScript and Java EE, and expand into the Internet of Things. Experts will present and you’ll be able to chat with them live online. Don’t miss out on this great opportunity to learn from some of the best minds in the Java community. Systems – OS Tips and Tricks for Sysadmins – Learn first hand how to configure Oracle Linux to run Oracle Database 11g and 12c, how to use the latest networking capabilities in Oracle Solaris 11, and how to troubleshoot networking problems in Unix and Linux systems. Database – Mastering Oracle Database Management & Development Techniques – Experts will present advanced features and management methods that will help you master your Oracle Database capabilities and drive greater performance, agility and manageability of your IT implementation. This track will build upon your skills with data management, migration, and performance. Middleware – The Architecture of Analytics: Big Time Big Data and Business Intelligence – This track will present a solution architect’s perspective on how business intelligence products in Oracle’s Fusion Middleware family and beyond fit into an effective big data architecture, and present insight and expertise from Oracle ACEs specializing in business Intelligence to help you meet your big data business intelligence challenges. This same content is being offered at 3 different dates listed below, at times convenient for all regions Americas - Wednesday July 9th EMEA – Thursday July 10th APAC English - July 16th 9am to 1pm PST12pm to 4pm  EST1 to 5 pm BRTRegister 9am to 1pm BST10am – 2pm CET12pm to 4pm MSK / GSTRegister IST – 10:00amSG – 12:30pmAEST – 2:30pmRegister The full event agenda is available at https://wikis.oracle.com/display/OTNVirtualTechSummit/Home

  Read the article

< Previous Page | 415 416 417 418 419 420 421 422 423 424 425 426  | Next Page >