Search Results

Search found 7017 results on 281 pages for '50 736'.

Page 42/281 | < Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >

  • Static IP Address on Ubuntu 12.04 Virtual Machine

    - by chrisnankervis
    I've setup a VM running Ubuntu 12.04 specifically for local web development and am having some problems ensuring it has a static IP address. A static IP address is important as I'm using the IP address in my hosts file to assign a .local suffix to addresses used both in browser and to connect to the correct database on the VM. Currently, every time I connect to a new network or my VM is assigned a new IP address I need to reconfigure my whole environment which is becoming quite a pain. It also probably doesn't help that the default-lease-time on the Ubuntu VM is set to 1800 by default. At the moment I'm using VMWare Fusion and the Network Adapter is enabled and set to "Autodetect" under Bridged Networking. I've tried to set a static IP address within the dhcpd.conf using the code below: host ubuntu { hardware ethernet 00:50:56:35:0f:f1; fixed-address: 192.168.100.100; } The fixed-address that I've used is also outside the range specified in the subnet block (which in this case is 192.168.100.128 to 192.168.100.254). I've tried adding and removing the network adapter and restarting my Mac after each time to no avail. Below is an ifconfig of the VM that might be of some help: eth0 Link encap:Ethernet HWaddr 00:50:56:35:0f:f1 inet addr:192.168.0.25 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::250:56ff:fe35:ff1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1624 errors:0 dropped:0 overruns:0 frame:0 TX packets:416 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:147348 (147.3 KB) TX bytes:41756 (41.7 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Are there any specific issues with 12.04 that I'm missing? Otherwise has anyone else got any ideas? Thanks in advance.

    Read the article

  • Farseer tutorial for the absolute beginners

    - by Bil Simser
    This post is inspired (and somewhat a direct copy) of a couple of posts Emanuele Feronato wrote back in 2009 about Box2D (his tutorial was ActionScript 3 based for Box2D, this is C# XNA for the Farseer Physics Engine). Here’s what we’re building: What is Farseer The Farseer Physics Engine is a collision detection system with realistic physics responses to help you easily create simple hobby games or complex simulation systems. Farseer was built as a .NET version of Box2D (based on the Box2D.XNA port of Box2D). While the constructs and syntax has changed over the years, the principles remain the same. This tutorial will walk you through exactly what Emanuele create for Flash but we’ll be doing it using C#, XNA and the Windows Phone platform. The first step is to download the library from its home on CodePlex. If you have NuGet installed, you can install the library itself using the NuGet package that but we’ll also be using some code from the Samples source that can only be obtained by downloading the library. Once you download and unpacked the zip file into a folder and open the solution, this is what you will get: The Samples XNA WP7 project (and content) have all the demos for Farseer. There’s a wealth of info here and great examples to look at to learn. The Farseer Physics XNA WP7 project contains the core libraries that do all the work. DebugView XNA contains an XNA-ready class to let you view debug data and information in the game draw loop (which you can copy into your project or build the source and reference the assembly). The downloaded version has to be compiled as it’s only available in source format so you can do that now if you want (open the solution file and rebuild everything). If you’re using the NuGet package you can just install that. We only need the core library and we’ll be copying in some code from the samples later. Your first Farseer experiment Start Visual Studio and create a new project using the Windows Phone template can call it whatever you want. It’s time to edit Game1.cs 1 public class Game1 : Game 2 { 3 private readonly GraphicsDeviceManager _graphics; 4 private DebugViewXNA _debugView; 5 private Body _floor; 6 private SpriteBatch _spriteBatch; 7 private float _timer; 8 private World _world; 9 10 public Game1() 11 { 12 _graphics = new GraphicsDeviceManager(this) 13 { 14 PreferredBackBufferHeight = 800, 15 PreferredBackBufferWidth = 480, 16 IsFullScreen = true 17 }; 18 19 Content.RootDirectory = "Content"; 20 21 // Frame rate is 30 fps by default for Windows Phone. 22 TargetElapsedTime = TimeSpan.FromTicks(333333); 23 24 // Extend battery life under lock. 25 InactiveSleepTime = TimeSpan.FromSeconds(1); 26 } 27 28 protected override void LoadContent() 29 { 30 // Create a new SpriteBatch, which can be used to draw textures. 31 _spriteBatch = new SpriteBatch(_graphics.GraphicsDevice); 32 33 // Load our font (DebugViewXNA needs it for the DebugPanel) 34 Content.Load<SpriteFont>("font"); 35 36 // Create our World with a gravity of 10 vertical units 37 if (_world == null) 38 { 39 _world = new World(Vector2.UnitY*10); 40 } 41 else 42 { 43 _world.Clear(); 44 } 45 46 if (_debugView == null) 47 { 48 _debugView = new DebugViewXNA(_world); 49 50 // default is shape, controller, joints 51 // we just want shapes to display 52 _debugView.RemoveFlags(DebugViewFlags.Controllers); 53 _debugView.RemoveFlags(DebugViewFlags.Joint); 54 55 _debugView.LoadContent(GraphicsDevice, Content); 56 } 57 58 // Create and position our floor 59 _floor = BodyFactory.CreateRectangle( 60 _world, 61 ConvertUnits.ToSimUnits(480), 62 ConvertUnits.ToSimUnits(50), 63 10f); 64 _floor.Position = ConvertUnits.ToSimUnits(240, 775); 65 _floor.IsStatic = true; 66 _floor.Restitution = 0.2f; 67 _floor.Friction = 0.2f; 68 } 69 70 protected override void Update(GameTime gameTime) 71 { 72 // Allows the game to exit 73 if (GamePad.GetState(PlayerIndex.One).Buttons.Back == ButtonState.Pressed) 74 Exit(); 75 76 // Create a random box every second 77 _timer += (float) gameTime.ElapsedGameTime.TotalSeconds; 78 if (_timer >= 1.0f) 79 { 80 // Reset our timer 81 _timer = 0f; 82 83 // Determine a random size for each box 84 var random = new Random(); 85 var width = random.Next(20, 100); 86 var height = random.Next(20, 100); 87 88 // Create it and store the size in the user data 89 var box = BodyFactory.CreateRectangle( 90 _world, 91 ConvertUnits.ToSimUnits(width), 92 ConvertUnits.ToSimUnits(height), 93 10f, 94 new Point(width, height)); 95 96 box.BodyType = BodyType.Dynamic; 97 box.Restitution = 0.2f; 98 box.Friction = 0.2f; 99 100 // Randomly pick a location along the top to drop it from 101 box.Position = ConvertUnits.ToSimUnits(random.Next(50, 400), 0); 102 } 103 104 // Advance all the elements in the world 105 _world.Step(Math.Min((float) gameTime.ElapsedGameTime.TotalMilliseconds*0.001f, (1f/30f))); 106 107 // Clean up any boxes that have fallen offscreen 108 foreach (var box in from box in _world.BodyList 109 let pos = ConvertUnits.ToDisplayUnits(box.Position) 110 where pos.Y > _graphics.GraphicsDevice.Viewport.Height 111 select box) 112 { 113 _world.RemoveBody(box); 114 } 115 116 base.Update(gameTime); 117 } 118 119 protected override void Draw(GameTime gameTime) 120 { 121 GraphicsDevice.Clear(Color.FromNonPremultiplied(51, 51, 51, 255)); 122 123 _spriteBatch.Begin(); 124 125 var projection = Matrix.CreateOrthographicOffCenter( 126 0f, 127 ConvertUnits.ToSimUnits(_graphics.GraphicsDevice.Viewport.Width), 128 ConvertUnits.ToSimUnits(_graphics.GraphicsDevice.Viewport.Height), 0f, 0f, 129 1f); 130 _debugView.RenderDebugData(ref projection); 131 132 _spriteBatch.End(); 133 134 base.Draw(gameTime); 135 } 136 } 137 Lines 4: Declare the debug view we’ll use for rendering (more on that later). Lines 8: Declare _world variable of type class World. World is the main object to interact with the Farseer engine. It stores all the joints and bodies, and is responsible for stepping through the simulation. Lines 12-17: Create the graphics device we’ll be rendering on. This is an XNA component and we’re just setting it to be the same size as the phone and toggling it to be full screen (no system tray). Lines 34: We create a SpriteFont here by adding it to the project. It’s called “font” because that’s what the DebugView uses but you can name it whatever you want (and if you’re not using DebugView for your production app you might have several fonts). Lines 37-44: We create the physics environment that Farseer uses to contain all the objects by specifying it here. We’re using Vector2.UnitY*10 to represent the gravity to be used in the environment. In other words, 10 units going in a downward motion. Lines 46-56: We create the DebugViewXNA here. This is copied from the […] from the code you downloaded and provides the ability to render all entities onto the screen. In a production release you’ll be doing the rendering yourself of each object but we cheat a bit for the demo and let the DebugView do it for us. The other thing it can provide is to render out a panel of debugging information while the simulation is going on. This is useful in tracking down objects, figuring out how something works, or just keeping track of what’s in the engine. Lines 49-67: Here we create a rigid body (Farseer only supports rigid bodies) to represent the floor that we’ll drop objects onto. We create it by using one of the Farseer factories and specifying the width and height. The ConvertUnits class is copied from the samples code as-is and lets us toggle between display units (pixels) and simulation units (usually metres). We’re creating a floor that’s 480 pixels wide and 50 pixels high (converting them to SimUnits for the engine to understand). We also position it near the bottom of the screen. Values are in metres and when specifying values they refer to the centre of the body object. Lines 77-78: The game Update method fires 30 times a second, too fast to be creating objects this quickly. So we use a variable to track the elapsed seconds since the last update, accumulate that value, then create a new box to drop when 1 second has passed. Lines 89-94: We create a box the same way we created our floor (coming up with a random width and height for the box). Lines 96-101: We set the box to be Dynamic (rather than Static like the floor object) and position it somewhere along the top of the screen. And now you created the world. Gravity does the rest and the boxes fall to the ground. Here’s the result: Farseer Physics Engine Demo using XNA Lines 105: We must update the world at every frame. We do this with the Step method which takes in the time interval. [more] Lines 108-114: Body objects are added to the world but never automatically removed (because Farseer doesn’t know about the display world, it has no idea if an item is on the screen or not). Here we just loop through all the entities and anything that’s dropped off the screen (below the bottom) gets removed from the World. This keeps our entity count down (the simulation never has more than 30 or 40 objects in the world no matter how long you run it for). Too many entities and the app will grind to a halt. Lines 125-130: Farseer knows nothing about the UI so that’s entirely up to you as to how to draw things. Farseer is just tracking the objects and moving them around using the physics engine and it’s rules. You’ll still use XNA to draw items (using the SpriteBatch.Draw method) so you can load up your usual textures and draw items and pirates and dancing zombies all over the screen. Instead in this demo we’re going to cheat a little. In the sample code for Farseer you can download there’s a project called DebugView XNA. This project contains the DebugViewXNA class which just handles iterating through all the bodies in the world and drawing the shapes. So we call the RenderDebugData method here of that class to draw everything correctly. In the case of this demo, we just want to draw Shapes so take a look at the source code for the DebugViewXNA class as to how it extracts all the vertices for the shapes created (in this case simple boxes) and draws them. You’ll learn a *lot* about how Farseer works just by looking at this class. That’s it, that’s all. Simple huh? Hope you enjoy the code and library. Physics is hard and requires some math skills to really grok. The Farseer Physics Engine makes it pretty easy to get up and running and start building games. In future posts we’ll get more in-depth with things you can do with the engine so this is just the beginning. Enjoy!

    Read the article

  • Checking preconditions or not

    - by Robert Dailey
    I've been wanting to find a solid answer to the question of whether or not to have runtime checks to validate input for the purposes of ensuring a client has stuck to their end of the agreement in design by contract. For example, consider a simple class constructor: class Foo { public: Foo( BarHandle bar ) { FooHandle handle = GetFooHandle( bar ); if( handle == NULL ) { throw std::exception( "invalid FooHandle" ); } } }; I would argue in this case that a user should not attempt to construct a Foo without a valid BarHandle. It doesn't seem right to verify that bar is valid inside of Foo's constructor. If I simply document that Foo's constructor requires a valid BarHandle, isn't that enough? Is this a proper way to enforce my precondition in design by contract? So far, everything I've read has mixed opinions on this. It seems like 50% of people would say to verify that bar is valid, the other 50% would say that I shouldn't do it, for example consider a case where the user verifies their BarHandle is correct, but a second (and unnecessary) check is also being done inside of Foo's constructor.

    Read the article

  • Friday Stats

    - by jjg
    As some of you may have noticed, we've recently opened a new repository in the Code Tools project for small utilities which can be used to gather info about the OpenJDK code base and builds. 1 The latest addition is a utility for analyzing the class file versions in a collection of class files. I've posted an example set of results from analyzing the class files in an OpenJDK build on Linux. 2. Most of the files are version 52 files as you would expect, but there is a surprising number of version 51 and 50 files, as well as a handful of v45.3 files as well. Digging deeper, it turns out that Nashorn is still using version 51 class files, and the Serviceability Agent is still using version 50 class files and one 45.3 class file, leaving the remainder of the 45.3 class files coming from RMI. For more info on the different class file versions, see Joe Darcy's class file version decoder rIng. Thanks to Stuart Marks for planting the seed for the class file version tool. See the project page, repo, and mail archive. http://cr.openjdk.java.net/~jjg/cfv-summary/open/

    Read the article

  • Managing products on a an ecommerce site [closed]

    - by John
    I've had a site that sells widgets for many years. I do not inventory my widgets, but the cost of adding them to the site and makings sure the site is current is becoming cost prohibitive. Here are the facts: I sell a single class of widget. I have about 50,000 widgets on my site. I have about 100 vendors that create and dropship the products when they get an order from me via email. Each vendor carries from 50 to 5000 types of widgets. Vendors all have websites with images and descriptions of their products. Each widget is produced in limited supply and usually sell out in 1-5 years. Prices of the widget often go up, sometimes more than 50% before they sell out. My vendors aren't very tech sophisticated. They have websites with their products, but most can't supply an api or database dump. Their websites usually display retail prices to the public, but I login or refer to a price list (usually excel) for wholesale prices. As it stands now, I hire local people to add and describe each widget to our website. It usually takes a person 4 minutes to add a widget to the site. This doesn't include moving to a new vendor. I feel like the upload/edit process is as good as it can get via a form/website. The problem is that it is getting very expensive to upload and keep the widget inventory current. I often get orders for something after it's sold out from the vendor or the price is wrong. This seems like it would be a problem in many industries. Can anyone suggest the cheapest way to upload inventory and ensure prices are current from my vendors? I'm assuming it will involve outsourcing, but I would like ideas on how to setup the compensation model.

    Read the article

  • Ubuntu 12, chromium/chrome facebook not loading

    - by Grant
    this problem started with chrome, tried chromium to fix it. both have this problem, and after installed firefox no longer works with facebook. I found a threas with two fixes that work and what I need to know is how to make these fixes permanent. one is a cache permissions workaround. launching chromium from terminal with a redirect to a new self created cache in the home folder works. how can i repair the permissions issue with the cache or make a permanent change to the cache chromium uses? two, the ifconfig wlan0 mtu set to 1492, this setting doesnt seem to be perpetual after a reboot. this set of issues is I believe specific to my particular install as there isnt a huge issue from anyone else out there, i'm on a toshiba satellite laptop with a 50/50 HDD partition split with windows. This is likely causing the issue or contributing in some way but I wont run linux full time on this machine until I get these kinks a more permanent fix. Thanks in advance for any advice/answers.

    Read the article

  • exception occurred for backend host '127.0.0.1/7001/7001': 'CONNECTION_REFUSED [os error=0, line 1715 of URL.cpp]: Error connecting to host 127.0.0.1:7001'

    - by Vijaya Moderator -Oracle
    When you hit the WLS Server via Proxy server, we may get the issue like below... [09/Jun/2014:06:05:50] failure ( 3284): for host 127.0.0.1 trying to GET /.../soundlink_wireless_​speaker/index.jsp, wl-proxy reports: exception occurred for backend host '127.0.0.1/7001/0': 'PROTOCOL_ERROR [line 835 of URL.cpp]: Backend Server not responding' [09/Jun/2014:06:05:50] failure ( 3284): for host 127.0.0.1 trying to GET /.../soundlink_wireless_​speaker/index.jsp, wl-proxy reports: exception occurred for backend host '127.0.0.1/7001/0': 'PROTOCOL_ERROR [line 835 of URL.cpp]: Backend Server not responding' [09/Jun/2014:06:05:51] failure ( 3284): for host 127.0.0.1 trying to GET /.../soundlink_wireless_​speaker/index.jsp, wl-proxy reports: exception occurred for backend host '127.0.0.1/7001/7001': 'CONNECTION_REFUSED [os error=0, line 1715 of URL.cpp]: Error connecting to host 127.0.0.1:7001' To solve the issue 1.  Check if there is any issue at the firewall by executing the below command     telnet 127.0.0.1 7001 2.  Also access  using the hostname instead of IP Address  If it errors out like below   Microsoft Telnet> o 127.0.0.1 7001 connecting to 127.0.0.1  Warning thrown at weblogic console: <BEA-000449> <Closing socket as no data read from it on 127.0.0.1:54,356 during the configured idle timeout of 5 secs>  Test the same again by disabling the firewall. Below are the steps... 1)Go to Start ----> Run  2)Type services.msc  3)In services.msc search for "Windows Firewall" and Right Click on "Windows Firewall"---->Select Stop. 4)Access the Weblogic URL  If the issue is resolved after disabling firewall, Request your  OS System Admin to open the port 7001 at the firewall end to access the application

    Read the article

  • How to debug lack of sound in Asus EEE PC

    - by Kalmar
    I have an Asus EEE PC 1225B with fresh Lubuntu 12.04. And no sound. It doesn't seem to be some common problem, so I have to make some research what's up. I tried running alsamixer, so I know I have Realtek ALC269VB with nothing muted unexpectedly. What can I do next to identify and solve the problem? Additional info: alsamixer shows two cards: HD-Audio Generic and HDA ATI-SB (Realtek ALC269VB); the first one is muted. ~$ aplay ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave aplay: main:682: blad otwierania audio: Nie ma takiego pliku ani katalogu The Polish part can be translated as "error opening audio: There is no such file or directory". ~$ sudo lspci -v | grep -A7 -i "audio" 00:01.1 Audio device: Advanced Micro Devices [AMD] nee ATI Wrestler HDMI Audio [Radeon HD 6250/6310] Subsystem: ASUSTeK Computer Inc. Device 103b Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at feb44000 (32-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 3 Capabilities: [58] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> -- 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) (rev 40) Subsystem: ASUSTeK Computer Inc. Device 103b Flags: bus master, slow devsel, latency 32, IRQ 16 Memory at feb40000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel

    Read the article

  • Ubuntu One has high CPU usage but no syncing

    - by Peter
    over the weekend I updated my computer to Windows 8. So far Ubuntu One was running smoothly, but ever since the update (clean, new install) Ubuntu doesn't sync any more. In Windows 7 it would start to sync at full internet speed as soon as I drop a file. But now in Windows 8, as soon as I drop a new file into the Ubuntu One folder, CPU usage goes up to about 50 % and no network traffic occurs. This stays like that for a couple of minutes, CPU usage goes back to normal and then the client says that all is in sync - which isn't true. Is it too early for Windows 8? Do others have the same problem or is there something I can do about it? I try a couple of different things, and realized that if the file size is 20 MB the files get uploaded. The original file was 1.5 GB. I also didn't work with 200, 100 and 50 MB large files. But even with 20 MB large files, the upload is very slow and not steady. The log give plenty of this error: - twisted - ERROR - Failure: exceptions.TypeError About which I don't know the meaning. By the way, the account works just fine on the Ubuntu 12.04 partition. Any help is greatly appreciated. -Peter

    Read the article

  • Example of DOD design

    - by Jeffrey
    I can't seem to find a nice explanation of the Data Oriented Design for a generic zombie game (it's just an example, pretty common example). Could you make an example of the Data Oriented Design on creating a generic zombie class? Is the following good? Zombie list class: class ZombieList { GLuint vbo; // generic zombie vertex model std::vector<color>; // object default color std::vector<texture>; // objects textures std::vector<vector3D>; // objects positions public: unsigned int create(); // return object id void move(unsigned int objId, vector3D offset); void rotate(unsigned int objId, float angle); void setColor(unsigned int objId, color c); void setPosition(unsigned int objId, color c); void setTexture(unsigned int, unsigned int); ... void update(Player*); // move towards player, attack if near } Example: Player p; Zombielist zl; unsigned int first = zl.create(); zl.setPosition(first, vector3D(50, 50)); zl.setTexture(first, texture("zombie1.png")); ... while (running) { // main loop ... zl.update(&p); zl.draw(); // draw every zombie } Or would creating a generic World container that contains every action from bite(zombieId, playerId) to moveTo(playerId, vector) to createPlayer() to shoot(playerId, vector) to face(radians)/face(vector); and contains: std::vector<zombie> std::vector<player> ... std::vector<mapchunk> ... std::vector<vbobufferid> player_run_animation; ... be a good example? Whats the proper way to organize a game with DOD?

    Read the article

  • I can't program because the code I am using uses old coding styles. Is this normal to programmers? [closed]

    - by Renato Dinhani Conceição
    I'm in my first real job as programmer, but I can't solve any problems because of the coding style used. The code here: Does not have comments Does not have functions (50, 100, 200, 300 or more lines executed in sequence) Uses a lot of if statements with a lot of paths Has variables that make no sense (eg.: cf_cfop, CF_Natop, lnom, r_procod) Uses an old language (Visual FoxPro 8 from 2002), but there are new releases from 2007. I feel like I have gone back to 1970. Is it normal for a programmer familiar with OOP, clean-code, design patterns, etc. to have trouble with coding in this old-fashion way? EDIT: All the answers are very good. For my (un)hope, appears that there are a lot of this kind of code bases around the world. A point mentioned to all answers is refactor the code. Yeah, I really like to do it. In my personal project, I always do this, but... I can't refactor the code. Programmers are only allowed to change the files in the task that they are designed for. Every change in old code must be keep commented in the code (even with Subversion as version control), plus meta informations (date, programmer, task) related to that change (this became a mess, there are code with 3 used lines and 50 old lines commented). I'm thinking that is not only a code problem, but a management of software development problem.

    Read the article

  • Calendar issue in simple java form using swing package?

    - by Rand Mate
    I have created a form using java swing package, For the purpose of adding Date of Birth in the form I have used the following code particularly to add in java Frame via Swing Package. Is there any alternative way to simplify the code. JLabel l2 = new JLabel("Date of Birth"); l2.setBounds(200,160,100,20); String day[] ={"1","2","3","4","5","6","7","8","9","10","11","12","13","14","15","16","17","18","19","20","21","22","23","24","25","26","27","28","29","30"}; String month[] = {"Jan", "Feb", "Mar", "Apr", "May", "Jun", "Jul", "Aug", "Sep", "Oct", "Nov", "Dec"}; String year[] = {"2012","2011","2010","2009","2008","2007","2006","2005","2004","2003","2002","2001","2000","1999","1998","1997","1996","1995","1994","1993","1992","1991","1990","1989","1988","1987","1986","1985","1984","1983","1982","1981","1980","1979","1976","1975"}; JComboBox cb1 = new JComboBox(day); cb1.setBounds(450,160,50,20); JComboBox cb2 = new JComboBox(month); cb2.setBounds(500,160,50,20); JComboBox cb3 = new JComboBox(year); cb3.setBounds(550,160,60,20);

    Read the article

  • Select Data From XML in MS SQL Server (T-SQL)

    - by Doug Lampe
    So you have used XML to give you some schema flexibility in your database, but now you need to get some data out.  What do you do?  The solution is relatively  simple:   DECLARE @iDoc INT /* Stores a pointer to the XML document */ DECLARE @XML VARCHAR(MAX) /* Stores the content of the XML */   set @XML = (SELECT top 1 Xml_Column_Name FROM My_Table where Primary_Key_Column = 'Some Value')   EXEC sp_xml_preparedocument @iDoc OUTPUT, @XML   SELECT * FROM OPENXML(@iDoc,'/some/valid/xpath',2)                      WITH (output_column1_name varchar(50)  'xml_node_name1',                                                     output_column2_name varchar(50)  'xml_node_name2')   EXEC sp_xml_removedocument @iDoc   In this example, the XML data would look something like this:   <some>   <valid>     <xpath>       <xml_node_name1>Value1</xml_node_name1>       <xml_node_name2>Value2</cml_node_name2>     </xpath>   </valid> </some>   The resulting query should give you this:   output_column1_name    output_column2_name ------------------------------------------ Value1                 Value2   Note that in this example we are only looking at a single record at a time.  You could use a cursor to iterate through multiple records and insert the XML data into a temporary table.

    Read the article

  • Ad Service That Lets You Choose Your Ad, and Then Some [on hold]

    - by user3634450
    I'm trying to build an app for both Android and/or iOS where part of the gameplay actually involves ads as a texture. I need to be able to choose which ads I would like to use. I need to be able to be able to identify the ads (which if I can choose which ads show up in the app shouldn't be that hard). I need to be able to swap in and out new ads on what could possibly be a daily basis (and don't want to have to update the app to do it). And as if that wasn't too needy a list, I need to be able to load 50 ads from the pool of ads I deem fit, all to each and every user of the app at least every couple of days. I don't care if the ads pay, I'm not looking for clicks, but I don't want to have to make 50 fake ads every couple of days, from an "artistic" level I don't want the content to feel phony or fake, and I don't really have a way to load content to each user via some internet source (if anyone could name one that would be great). I'm not sure what kind of ad provider would like or even approve of this, in fact just what I've described might be against Google Play's or iTunes' content developer policies, but if anyone could give me any advice to steer me in the right direction it would be greatly appreciated, thank you.

    Read the article

  • Using visitor pattern with large object hierarchy

    - by T. Fabre
    Context I've been using with a hierarchy of objects (an expression tree) a "pseudo" visitor pattern (pseudo, as in it does not use double dispatch) : public interface MyInterface { void Accept(SomeClass operationClass); } public class MyImpl : MyInterface { public void Accept(SomeClass operationClass) { operationClass.DoSomething(); operationClass.DoSomethingElse(); // ... and so on ... } } This design was, however questionnable, pretty comfortable since the number of implementations of MyInterface is significant (~50 or more) and I didn't need to add extra operations. Each implementation is unique (it's a different expression or operator), and some are composites (ie, operator nodes that will contain other operator/leaf nodes). Traversal is currently performed by calling the Accept operation on the root node of the tree, which in turns calls Accept on each of its child nodes, which in turn... and so on... But the time has come where I need to add a new operation, such as pretty printing : public class MyImpl : MyInterface { // Property does not come from MyInterface public string SomeProperty { get; set; } public void Accept(SomeClass operationClass) { operationClass.DoSomething(); operationClass.DoSomethingElse(); // ... and so on ... } public void Accept(SomePrettyPrinter printer) { printer.PrettyPrint(this.SomeProperty); } } I basically see two options : Keep the same design, adding a new method for my operation to each derived class, at the expense of maintainibility (not an option, IMHO) Use the "true" Visitor pattern, at the expense of extensibility (not an option, as I expect to have more implementations coming along the way...), with about 50+ overloads of the Visit method, each one matching a specific implementation ? Question Would you recommand using the Visitor pattern ? Is there any other pattern that could help solve this issue ?

    Read the article

  • Dual monitor display 12.04?

    - by MrMonty
    I have 2 beautiful 27" asus monitors. I started trying out Ubuntu 12.04 and now only one works and thats vga .. Any help here cause I'm stumped. I have a bfg tech nivida Geforce 8800 gt 512mb and I'm trying to fix this. Getting this error Wen i try to configure the xorg file Failed to set MetaMode (1) 'DFP-0: 1280x1024 @1280x1024 +0+0, DFP-1: 1280x1024 @1280x1024 +1280+0' (Mode 2560x1024, id: 50) on X screen 0. ........................................................................................... This is the xorg.conf ....................................................... nvidia-settings: X configuration file generated by nvidia-settings nvidia-settings: version 295.33 (buildd@allspice) Fri Mar 30 15:25:24 UTC 2012 Section "ServerLayout" Removed Option "Xinerama" "1" Removed Option "Xinerama" "0" Removed Option "Xinerama" "1" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputClass" Identifier "Mouse Remap" MatchProduct "Saitek Cyborg R.A.T.7 Mouse" MatchDevicePath "/dev/input/event*" Option "ButtonMapping" "1 2 3 4 5 6 7 8 9 0 0 0 0 0 0" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "Ancor Communications Inc VE247" HorizSync 30.0 - 83.0 VertRefresh 50.0 - 76.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Ancor Communications Inc VE247" HorizSync 30.0 - 83.0 VertRefresh 50.0 - 76.0 Option "DPMS" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 1500" BusID "PCI:1:0:0" Screen 1 EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 1500" EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "DFP-1" Option "metamodes" "DFP-1: 1280x1024 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Removed Option "TwinView" "0" Removed Option "metamodes" "DFP-0: 1280x1024 +0+0" Removed Option "TwinView" "1" Removed Option "metamodes" "DFP-0: 1280x1024 +0+0, DFP-1: 1280x1024 +1280+0" Removed Option "TwinView" "0" Removed Option "metamodes" "DFP-0: 1280x1024 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-0" Option "metamodes" "DFP-0: 1280x1024 +0+0, DFP-1: 1280x1024 +1280+0; DFP-1: 1280x1024_60 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Disable" EndSection FILE ^^^^

    Read the article

  • International Pricing of Software [closed]

    - by arachnode.net
    I operate a small company that charges $99 for a piece of software. I'd like to know what would be a fair price for non-US customers. Today I sold a license to a party in South Africa. He told me he had been watching the project for two years while business justification could be made for the purchase as SA's currency is nine times weaker than the US dollar. I found this resource detailing how much a Big Mac costs in various countries: http://howmuchatyourplace.com/how_much_does/Big%20Mac_cost.php I realize that the cost of producing a Big Mac varies from locale to locale as does the demand for one. I am aware that many software companies charge prices in local currencies that equate to the price in US dollars. I am aware that my costs remain fixed, and I obviously I cannot discount the rate at which my time costs me. I'm OK with earning less per sale as I would rather get my software onto the desktops of those that need it rather than having them try to write it themselves. Support is light and I can usually point a user to an existing blog or forum post. Being a resident of Hawaii, I am aware that certain goods and services cost more here. Power is up to six times as much per KWH as it is in, say, Seattle, and wages are approximately 60% of what they are for my profession (programmer). I'd like to offer my software at a price that would be fair for everyone around the globe. If a currency is 2 foreign units to 1 US dollar, and goods and services cost 50% more and pay for an equivalent job is 50% of what it is here, should I charge, say, $50 instead of $99? Is there a resource which would allow me to input a price in US dollars and adjust for a list of international locations?

    Read the article

  • libgdx loading textures fails [duplicate]

    - by Chris
    This question already has an answer here: Why do I get this file loading exception when trying to draw sprites with libgdx? 4 answers I'm trying to load my texture with playerTex = new Texture(Gdx.files.internal("player.jpg")); player.jpg is located under my-gdx-game-android/assets/data/player.jpg I get an exception like this: Full Code: @Override public void create() { camera = new OrthographicCamera(); camera.setToOrtho(false, Gdx.graphics.getWidth(), Gdx.graphics.getHeight()); batch = new SpriteBatch(); FileHandle file = Gdx.files.internal("player.jpg"); playerTex = new Texture(file); player = new Rectangle(); player.x = 800-20; player.y = 250; player.width = 20; player.height = 80; } @Override public void dispose() { // dispose of all the native resources playerTex.dispose(); batch.dispose(); } @Override public void render() { Gdx.gl.glClearColor(1, 1, 1, 1); Gdx.gl.glClear(GL10.GL_COLOR_BUFFER_BIT); camera.update(); batch.setProjectionMatrix(camera.combined); batch.begin(); batch.draw(playerTex, player.x, player.y); batch.end(); if(Gdx.input.isKeyPressed(Keys.DOWN)) player.y -= 50 * Gdx.graphics.getDeltaTime(); if(Gdx.input.isKeyPressed(Keys.UP)) player.y += 50 * Gdx.graphics.getDeltaTime(); }

    Read the article

  • Managing many draw calls for dynamic objects

    - by codetiger
    We are developing a game (cross-platform) using Irrlicht. The game has many (around 200 - 500) dynamic objects flying around during the game. Most of these objects are static mesh and build from 20 - 50 unique Meshes. We created seperate scenenodes for each object and referring its mesh instance. But the output was very much unexpected. Menu screen: (150 tris - Just to show you the full speed rendering performance of 2 test computers) a) NVidia Quadro FX 3800 with 1GB: 1600 FPS DirectX and 2600 FPS on OpenGL b) Mac Mini with Geforce 9400M 256mb: 260 FPS in OpenGL Now inside the game in a test level: (160 dynamic objects counting around 10K tris): a) NVidia Quadro FX 3800 with 1GB: 45 FPS DirectX and 50 FPS on OpenGL b) Mac Mini with Geforce 9400M 256mb: 45 FPS in OpenGL Obviously we don't have the option of mesh batch rendering as most of the objects are dynamic. And the one big static terrain is already in single mesh buffer. To add more information, we use one 2048 png for texture for most of the dynamic objects. And our collision detection hardly and other calculations hardly make any impact on FPS. So we understood its the draw calls we make that eats up all FPS. Is there a way we can optimize the rendering, or are we missing something?

    Read the article

  • Effective and simple matching for 2 unequal small-scale point sets

    - by Pavlo Dyban
    I need to match two sets of 3D points, however the number of points in each set can be different. It seems that most algorithms are designed to align images and trimmed to work with hundreds of thousands of points. My case are 50 to 150 points in each of the two sets. So far I have acquainted myself with Iterative Closest Point and Procrustes Matching algorithms. Implementing Procrustes algorithms seems like a total overkill for this small quantity. ICP has many implementations, but I haven't found any readily implemented version accounting for the so-called "outliers" - points without a matching pair. Besides the implementation expense, algorithms like Fractional and Sparse ICP use some statistics information to cancel points that are considered outliers. For series with 50 to 150 points statistic measures are often biased or statistic significance criteria are not met. I know of Assignment Problem in linear optimization, but it is not suitable for cases with unequal sets of points. Are there other, small-scale algorithms that solve the problem of matching 2 point sets? I am looking for algorithm names, scientific papers or C++ implementations. I need some hints to know where to start my search.

    Read the article

  • Is this the most effect simple way to display a moving image? SDL2

    - by user36324
    I've looked around for tutorials on SDL2, but there isnt many so I am curious i was messing around and is this an effective way to move an image. One problem is that it drags along the image to where it moves. #include "SDL.h" #include "SDL_image.h" int main(int argc, char* argv[]) { bool exit = false; SDL_Init(SDL_INIT_EVERYTHING); SDL_Window *win = SDL_CreateWindow("Hello World!", 100, 100, 640, 480, SDL_WINDOW_SHOWN); SDL_Renderer *ren = SDL_CreateRenderer(win, -1, SDL_RENDERER_ACCELERATED | SDL_RENDERER_PRESENTVSYNC); SDL_Surface *png = IMG_Load("character.png"); SDL_Rect src; src.x = 0; src.y = 0; src.w = 161; src.h = 159; SDL_Rect dest; dest.x = 50; dest.y = 50; dest.w = 161; dest.h = 159; SDL_Texture *tex = SDL_CreateTextureFromSurface(ren, png); SDL_FreeSurface(png); while(exit==false){ dest.x++; SDL_RenderClear(ren); SDL_RenderCopy(ren, tex, &src, &dest); SDL_RenderPresent(ren); } SDL_Delay(5000); SDL_DestroyTexture(tex); SDL_DestroyRenderer(ren); SDL_DestroyWindow(win); SDL_Quit(); }

    Read the article

  • Best way to calculate unit deaths in browser game combat?

    - by MikeCruz13
    My browser game's combat system is written and mechanically functioning well. It's written in PHP and uses a SQL database. I'm happy with the unit balance in relation to one another. I am, however, a little worried about how I'm calculating unit deaths when one player attacks another because the deaths seem to pile up a little fast for my taste. For this system, a battle doesn't just trigger, calculate winner, and end. Instead, it is allowed to go for several rounds (say one round every 15 mins.) until one side passes a threshold of being too strong for the other player and allows players to send reinforcements between rounds. Each round, units pair up and attack each other. Essentially what I do is calculate the damage: AP = Attack Points HP = Hit Points Units AP * Quantity * Random Factors * other factors (such as attrition) I take that and divide by the defending unit's HP to find the number of casualties of defending units. So, for example (simplified to take out some factors), if I have: 500 attackers with 50 AP vs 1000 defenders with 100 HP = 250 deaths. I wonder if that last step could be handled better to reduce the deaths piling up. Some ideas: I just change all the units with more HP? I make sure to set the Attacking unit's AP to be a max of the defender's HP to make sure they only kill 1 unit. (is that fair if I have less huge units vs many small units?) I spread the damage around more by including the defending unit's quantity more? i.e. in that scenario some are dead and some are 50% damage. (How would I track this every round?) Other better mathematical approaches?

    Read the article

  • Unity3D : Pause Menu - Android

    - by user3666251
    Im making a 2D game for android.I almost completed the game but now I need a pause game option.I added a pause icon on the top right side of the screen.The icon is a gui texture.Here is what I did so far : I made a script which will bring up some buttons (which is not working) and attached it to the GUITexture.This is the script : #pragma strict function OnMouseDown() { Debug.Log("*Pause Menu Opens*"); Time.timeScale = 0; if (GUI.Button(Rect(10,10,100,50),"Restart")); Application.LoadLevel(Application.loadedLevel); if (GUI.Button(Rect(10,60,100,50),"MainMenu")); Application.LoadLevel("MainMenu"); } Now,the problem stands at the part where the buttons won't show up,the game freezes at the first frame but the buttons won't show up.Please,if you can help I would be realy thankful. Thank you. Edit #1 : I just noticed that when I click "Pause" the game freezes and it takes me to the MainMenu.That's because I added the GUIButton which takes you to the main menu.I think the whole script structure is wrong.I also forgot to mention that Im new in scripting/unity. Thank you.

    Read the article

  • Whats a good host for an active vBulletin site?

    - by Kyle
    I've been switching hosts using a VPS each time and I'm just really not sure I'm finding the right VPS's. I've used a VPS from burst.net & rubyringtech and I just feel like it's slowly killing my site because of the slow speed. I really don't know if it's the network or the VPS itself but I really wish to fix this. When I TOP into the VPS peak times it shows this: top - 03:18:56 up 16:33, 1 user, load average: 1.33, 1.40, 1.33 Tasks: 30 total, 1 running, 29 sleeping, 0 stopped, 0 zombie Cpu(s): 27.2%us, 13.6%sy, 0.0%ni, 59.2%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 1048576k total, 679712k used, 368864k free, 0k buffers Swap: 0k total, 0k used, 0k free, 0k cached And pages take atleast a good 2-3 minutes to load. I have only like 50-60 members on the forum also. I had a shared hosting account and the forum was lightning fast.... Is a VPS a bad idea? :\ What should I do to fix this? I'm running lighttpd with xcache, and the latest mysql + php version. The server is a intel i7 2600 w/ 1gb uplink (I think the 1gb uplink is a lie because I've tested the network and the highest download speed I've seen was 20mb/s from a code.google page) All in all I've seen people talking about linode. Should I try them? I honestly don't need a dedicated server yet it's only 50-70 members online. What should I do? I really want a VPS because I enjoy root access. Does anyone have any suggestions?

    Read the article

  • Alternatives to time tracking methodologies [closed]

    - by Brandon Wamboldt
    Question first: What are some feasible alternatives to time tracking for employees in a web/software development company, and why are they better options Explanation: I work at a company where we work like this. Everybody is paid salary. We have 3 types of work, Contract, Adhoc and Internal (Non billable). Adhoc is just small changes that take a few hours and we just bill the client at the end of the month. Contracts are signed and we have this big long process, the usual. We figure out how much to charge by getting an estimation of the time involved (From the design and the developers), multiplying it by our hourly rate and that's it. So say we estimate 50 hours for a website. We have time tracking software and have to record the time in 15 we spend on it (7:00 to 7:15 for example), the project name, and give it some comments. Now if we go over the 50 hours, we are both losing money and are inefficient. Now that I've explained how the system works, my question is how else can it be done if a better method exists (Which I'm sure one must). Nobody here likes the current system, we just can't find an alternative. I'd be more than willing to work after hours longer hours on a project to get it done in time, but I'm much inclined to do so with the current system. I'd love to be able to sum up (Or link) to this post for my manager to show them why we should use abc system instead of this system.

    Read the article

< Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >