Search Results

Search found 27302 results on 1093 pages for 'annoyed to no end'.

Page 42/1093 | < Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >

  • How can I make TextToSpeech to speak a text with max volume and restore original volume after speak end?

    - by HelloCW
    I save the current volume both STREAM_RING and STREAM_MUSIC before sTts.get().speak(s, TextToSpeech.QUEUE_ADD, null), I hope the TextToSpeech can speak a text with max volume, but in fact I find the TextToSpeech speak the text with current volume, it seems that sTts.get().speak is asynchronous. How can I make TextToSpeech to speak a text with max volume and restore original volume after speak end? Thanks! public class SpeechTxt { private static SoftReference<TextToSpeech> sTts; public static void SpeakOut(final Context context, final String s) { final Context appContext = context.getApplicationContext(); if (sTts == null) { sTts = new SoftReference<TextToSpeech>(new TextToSpeech(appContext, new TextToSpeech.OnInitListener() { @Override public void onInit(int status) { if (status == TextToSpeech.SUCCESS) { speak(appContext, s); } else { } } })); } else { speak(appContext, s); } } private static void speak(Context context, String s) { if (sTts != null) { switch (sTts.get().setLanguage(Locale.getDefault())) { case TextToSpeech.LANG_COUNTRY_AVAILABLE: case TextToSpeech.LANG_COUNTRY_VAR_AVAILABLE: case TextToSpeech.LANG_AVAILABLE: { sTts.get().setPitch((float) 0.6); sTts.get().setSpeechRate((float) 0.8); int currentRing=PublicParFun.GetCurrentVol(context, AudioManager.STREAM_RING); int currentPlay=PublicParFun.GetCurrentVol(context, AudioManager.STREAM_MUSIC); PublicParFun.SetRingVol(context, 0); PublicParFun.SetPlayVol(context,1000000); sTts.get().speak(s, TextToSpeech.QUEUE_ADD, null); PublicParFun.SetRingVol(context, currentRing); PublicParFun.SetPlayVol(context,currentPlay); break; } case TextToSpeech.LANG_MISSING_DATA: { break; } case TextToSpeech.LANG_NOT_SUPPORTED: // not much to do here } } } public static int GetCurrentVol(Context myContext,int streamType){ AudioManager mAudioManager = (AudioManager)myContext.getSystemService(Context.AUDIO_SERVICE); int current = mAudioManager.getStreamVolume( streamType); return current; } public static void SetRingVol(Context myContext,int vol){ SetVol(myContext,AudioManager.STREAM_RING, vol); } public static void SetPlayVol(Context myContext,int vol){ SetVol(myContext,AudioManager.STREAM_MUSIC, vol); } private static void SetVol(Context myContext,int streamType,int vol){ AudioManager mAudioManager = (AudioManager)myContext.getSystemService(Context.AUDIO_SERVICE); int max = mAudioManager.getStreamMaxVolume(streamType); if (vol>max){ vol=max; } mAudioManager.setStreamVolume(streamType,vol, 0); } }

    Read the article

  • HELP!! Delayed-job: Rake aborted! Can't modify frozen hash

    - by pmneve
    Too bad even the trace doesn't say which hash is involved. Sorry this post is long: am trying to provide enough context to be meaningful. Occurs intermittently when rake jobs:work is pulling a command out of delayed_jobs while my status observer is in the process of parsing a log file for detailed results of the previous delayed_job denizen. I have an observer class (in RAILS_ROOT/lib ) which listens for the events, makes a copy of them and calls the owner class ( in apps/models ) which then calls on the log parser (also in /lib) to do the actual work. (Should both of those classes, the observer and the parser be in app/models?) Am due to deliver this application in a few days and this is killing it (and me). Am using DirectoryWatcher to look for flag files that indicate the start and finish of the delayed_jobs. That is started at the end of environment.rb like this: require 'directory_watcher' $scriptStatusObserver = ScriptStatusObserver.new dirToWatch ="#{RAILS_ROOT}/tmp/flags" $directoryWatcher = DirectoryWatcher.new( dirToWatch ) $directoryWatcher.glob= "*.flg" $directoryWatcher.interval=(15) $directoryWatcher.add_observer( $scriptStatusObserver ) $directoryWatcher.persist=("#{RAILS_ROOT}/tmp/flags/dw_state.yml") $directoryWatcher.start at_exit { $directoryWatcher.stop } This code is outside of the run method (btw is that the best place or is inside the run better?) Here is the observer: require 'script_run' class ScriptStatusObserver def initialize @rcvdEvents = [] end def update( *events ) begin puts "#{LINE.to_s}: ScriptStatusObserver events: \n"+events.to_yaml cnt = 0 events.each do |e| if e.to_s.match(/^\s*added/) cnt = cnt + 1 @rcvdEvents << e end end ScriptRun.new.catch_up( @rcvdEvents ) if cnt > 0 @rcvdEvents.clear rescue puts $! end end end Here is ScriptRun (it attaches to an associative table built with has_many:through) require 'observer' class ScriptRun < ActiveRecord::Base set_table_name "scripts_runs" belongs_to :script belongs_to :run def parse( result ) parser = LogParser.new parser.parse(result) end def catch_up( events ) events.each do |e| typ = e.type path = e.path thisMatch = path.match(/flags\/(\d+)_(\d+)_([\d\.]+)_(\w+)\.flg/) run_id = thisMatch[1] script_id = thisMatch[2] ts = thisMatch[3] status = thisMatch[4] if e.to_s.match(/^\s*added/) status_update( script_id, run_id, status, ts, path ) end end end def status_update( script_id, run_id, status, ts, path ) scriptrun = ScriptRun.find(:first, :conditions => [ "run_id = ? and script_id = ?", run_id.to_i, script_id.to_i ]) if scriptrun.kind_of?(ScriptRun) currStatus = scriptrun.status if not currStatus == 'completed' scriptrun.update_attribute(:status, status) if status == 'parse' flag = File.new(path) logSpec = flag.gets flag.close logName = File.basename(logSpec) logPath = logSpec.sub(logName, '') logName =~ /^(([\w_]+)_([\w]+)_(\d+))\.log$/ name = $1 basename = $2 runenv = $3 tsOrPid = $4 result = Result.new result.log_path = logPath result.basename = basename result.name = name result.script_id = script_id.to_i result.run_id = run_id.to_i if runenv == 'sit' runenv = 'SIT3348' end result.application_environment_id = ApplicationEnvironment.find(:first, :conditions => [ "nodename = ?", runenv]).id parse(result) if run_completed?( run_id ) myRun = Run.find(run_id.to_i) if myRun.kind_of?( Run ) myRun.update_attribute( :completed, Time.now.to_f ) end end end end else puts "#{__LINE__.to_s}: ScriptRun.status_update: ScriptRun not found for run #{run_id} script #{script_id} ts #{ts.to_s}" end File.delete(path) end def run_completed?( id ) scriptruns = ScriptRun.find(:all, :conditions = [ "run_id = ?", id.to_i] ) scriptruns.each do |sr| if not sr.status == 'completed' return false end end return true end end LogParser is too long even for this post but it reads the script log and pulls detailed information (counts and timings) out of the log and writes to a details table. It also tallies and calculates averages and rolls those up into summary tables for quicker access from the web pages. Here is the error trace: (don't ask why everything is under my Windows profile. It's a long story) Scanner running 1270239731.43 directory_watcher.notify_observers: #, #] update:[#, /pneve/workspace/waftt-0.29/tmp/flags/100039_18_1270239550.108_parse.flg"] rake aborted! can't modify frozen hash C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/rails/activerecord/l ib/active_record/attribute_methods.rb:313:in []=' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/rails/activerecord/l ib/active_record/attribute_methods.rb:313:inwrite_attribute_without_dirty' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/rails/activerecord/l ib/active_record/dirty.rb:139:in write_attribute' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/rails/activerecord/l ib/active_record/attribute_methods.rb:211:inlast_error=' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:141:in handle_failed_job' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:115:inrun' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:162:in reserve_and_run_one_job' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:92:inwork_off' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:91:in times' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:91:inwork_off' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:66:in start' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/rails/activesupport/ lib/active_support/core_ext/benchmark.rb:10:inrealtime' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:65:in start' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:62:inloop' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:62:in start' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/tasks.rb:13 c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:636:incall' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:636:in execute' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:631:ineach' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:631:in execute' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:597:ininvoke_with_call_chain' c:/Documents and Settings/pneve/ruby/lib/ruby/1.8/monitor.rb:242:in synchronize ' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:590:ininvoke_with_call_chain' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:583:in invoke' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:2051:ininvoke_task' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:2029:in top_level' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:2029:ineach' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:2029:in top_level' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:2068:instandard_exception_handling' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:2023:in top_level' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:2001:inrun' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:2068:in standard_exception_handling' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:1998:inrun' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/bin/rake: 31 c:/Documents and Settings/pneve/ruby/bin/rake:16:in `load' c:/Documents and Settings/pneve/ruby/bin/rake:16

    Read the article

  • HELP!! Rake aborted! Can't modify frozen hash

    - by pmneve
    Too bad even the trace doesn't say which hash is involved. Sorry this post is long: am trying to provide enough context to be meaningful. Occurs intermittently when rake jobs:work is pulling a command out of delayed_jobs while my status observer is in the process of parsing a log file for detailed results of the previous delayed_job denizen. I have an observer class (in RAILS_ROOT/lib ) which listens for the events, makes a copy of them and calls the owner class ( in apps/models ) which then calls on the log parser (also in /lib) to do the actual work. (Should both of those classes, the observer and the parser be in app/models?) Am due to deliver this application in a few days and this is killing it (and me). Am using DirectoryWatcher to look for flag files that indicate the start and finish of the delayed_jobs. That is started at the end of environment.rb like this: require 'directory_watcher' $scriptStatusObserver = ScriptStatusObserver.new dirToWatch ="#{RAILS_ROOT}/tmp/flags" $directoryWatcher = DirectoryWatcher.new( dirToWatch ) $directoryWatcher.glob= "*.flg" $directoryWatcher.interval=(15) $directoryWatcher.add_observer( $scriptStatusObserver ) $directoryWatcher.persist=("#{RAILS_ROOT}/tmp/flags/dw_state.yml") $directoryWatcher.start at_exit { $directoryWatcher.stop } This code is outside of the run method (btw is that the best place or is inside the run better?) Here is the observer: require 'script_run' class ScriptStatusObserver def initialize @rcvdEvents = [] end def update( *events ) begin puts "#{LINE.to_s}: ScriptStatusObserver events: \n"+events.to_yaml cnt = 0 events.each do |e| if e.to_s.match(/^\s*added/) cnt = cnt + 1 @rcvdEvents << e end end ScriptRun.new.catch_up( @rcvdEvents ) if cnt > 0 @rcvdEvents.clear rescue puts $! end end end Here is ScriptRun (it attaches to an associative table built with has_many:through) require 'observer' class ScriptRun < ActiveRecord::Base set_table_name "scripts_runs" belongs_to :script belongs_to :run def parse( result ) parser = LogParser.new parser.parse(result) end def catch_up( events ) events.each do |e| typ = e.type path = e.path thisMatch = path.match(/flags\/(\d+)_(\d+)_([\d\.]+)_(\w+)\.flg/) run_id = thisMatch[1] script_id = thisMatch[2] ts = thisMatch[3] status = thisMatch[4] if e.to_s.match(/^\s*added/) status_update( script_id, run_id, status, ts, path ) end end end def status_update( script_id, run_id, status, ts, path ) scriptrun = ScriptRun.find(:first, :conditions => [ "run_id = ? and script_id = ?", run_id.to_i, script_id.to_i ]) if scriptrun.kind_of?(ScriptRun) currStatus = scriptrun.status if not currStatus == 'completed' scriptrun.update_attribute(:status, status) if status == 'parse' flag = File.new(path) logSpec = flag.gets flag.close logName = File.basename(logSpec) logPath = logSpec.sub(logName, '') logName =~ /^(([\w_]+)_([\w]+)_(\d+))\.log$/ name = $1 basename = $2 runenv = $3 tsOrPid = $4 result = Result.new result.log_path = logPath result.basename = basename result.name = name result.script_id = script_id.to_i result.run_id = run_id.to_i if runenv == 'sit' runenv = 'SIT3348' end result.application_environment_id = ApplicationEnvironment.find(:first, :conditions => [ "nodename = ?", runenv]).id parse(result) if run_completed?( run_id ) myRun = Run.find(run_id.to_i) if myRun.kind_of?( Run ) myRun.update_attribute( :completed, Time.now.to_f ) end end end end else puts "#{__LINE__.to_s}: ScriptRun.status_update: ScriptRun not found for run #{run_id} script #{script_id} ts #{ts.to_s}" end File.delete(path) end def run_completed?( id ) scriptruns = ScriptRun.find(:all, :conditions = [ "run_id = ?", id.to_i] ) scriptruns.each do |sr| if not sr.status == 'completed' return false end end return true end end LogParser is too long even for this post but it reads the script log and pulls detailed information (counts and timings) out of the log and writes to a details table. It also tallies and calculates averages and rolls those up into summary tables for quicker access from the web pages. Here is the error trace: (don't ask why everything is under my Windows profile. It's a long story) Scanner running 1270239731.43 directory_watcher.notify_observers: #, #] update:[#, /pneve/workspace/waftt-0.29/tmp/flags/100039_18_1270239550.108_parse.flg"] rake aborted! can't modify frozen hash C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/rails/activerecord/l ib/active_record/attribute_methods.rb:313:in []=' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/rails/activerecord/l ib/active_record/attribute_methods.rb:313:inwrite_attribute_without_dirty' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/rails/activerecord/l ib/active_record/dirty.rb:139:in write_attribute' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/rails/activerecord/l ib/active_record/attribute_methods.rb:211:inlast_error=' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:141:in handle_failed_job' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:115:inrun' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:162:in reserve_and_run_one_job' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:92:inwork_off' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:91:in times' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:91:inwork_off' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:66:in start' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/rails/activesupport/ lib/active_support/core_ext/benchmark.rb:10:inrealtime' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:65:in start' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:62:inloop' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:62:in start' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/tasks.rb:13 c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:636:incall' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:636:in execute' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:631:ineach' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:631:in execute' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:597:ininvoke_with_call_chain' c:/Documents and Settings/pneve/ruby/lib/ruby/1.8/monitor.rb:242:in synchronize ' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:590:ininvoke_with_call_chain' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:583:in invoke' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:2051:ininvoke_task' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:2029:in top_level' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:2029:ineach' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:2029:in top_level' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:2068:instandard_exception_handling' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:2023:in top_level' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:2001:inrun' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:2068:in standard_exception_handling' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:1998:inrun' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/bin/rake: 31 c:/Documents and Settings/pneve/ruby/bin/rake:16:in `load' c:/Documents and Settings/pneve/ruby/bin/rake:16

    Read the article

  • Read line and change the line that not consist of certain words and not end with dot

    - by igo
    I wanna read some text files in a folder line by line. for example of 1 txt : Fast and Effective Text Mining Using Linear-time Document Clustering Bjornar Larsen WORD2 Chinatsu Aone SRA International AK, Inc. 4300 Fair Lakes Cow-l Fairfax, VA 22033 {bjornar-larsen, WORD1 I wanna remove line that does not contain of words = word, word2, word3, and does not end with dot . so. from the example, the result will be : Bjornar Larsen WORD2 Chinatsu Aone SRA International, Inc. {bjornar-larsen, WORD1 I am confused, hw to remove the line? it that possible? or can we replace them with a space? here's the code : $url = glob($savePath.'*.txt'); foreach ($url as $file => $files) { $handle = fopen($files, "r") or die ('can not open file'); $ori_content= file_get_contents($files); foreach(preg_split("/((\r?\n)|(\r\n?))/", $ori_content) as $buffer){ $pos1 = stripos($buffer, $word1); $pos2 = stripos($buffer, $word2); $pos3 = stripos($buffer, $word3); $last = $str[strlen($buffer)-1];//read the las character if (true !== $pos1 OR true !== $pos2 OR true !==$pos3 && $last != '.'){ //how to remove } } } please help me, thank you so much :)

    Read the article

  • jackson failing to map empty array with No content to map to Object due to end of input

    - by ijabz
    I send a query to an api and map the json results to my classes using Jackson. When I get some results it works fine, but when there are no results it fails with java.io.EOFException: No content to map to Object due to end of input at org.codehaus.jackson.map.ObjectMapper._initForReading(ObjectMapper.java:2766) at org.codehaus.jackson.map.ObjectMapper._readMapAndClose(ObjectMapper.java:2709) at org.codehaus.jackson.map.ObjectMapper.readValue(ObjectMapper.java:1854) at com.jthink.discogs.query.DiscogsServerQuery.mapQuery(DiscogsServerQuery.java:382) at com.jthink.discogs.query.SearchQuery.mapQuery(SearchQuery.java:37)* But the thing is the api isn't returning nothing at all, so I dont see why it is failing. Here is the query: http://api.discogs.com/database/search?page=1&type=release&release_title=nude+and+rude+the+best+of+iggy+pop this is what I get back { "pagination": { "per_page": 50, "pages": 1, "page": 1, "urls": {}, "items": 0 }, "results": [] } and here is the top level object Im trying to map to public class Search { private Pagination pagination; private Result[] results; public Pagination getPagination() { return pagination; } public void setPagination(Pagination pagination) { this.pagination = pagination; } public Result[] getResults() { return results; } public void setResults(Result[] results) { this.results = results; } } Im guessing the problem is something to do with the results array being returned being blank, but cant see what Im doing wrong EDIT: The comment below was correct, although I usually receive { "pagination": { "per_page": 50, "pages": 1, "page": 1, "urls": {}, "items": 0 }, "results": [] } and in these cases there is no problem but sometimes I seem to just get an empty String. Now Im wondering if the problem is how I read from the inputstream if (responseCode == HttpURLConnection.HTTP_OK) InputStreamReader in= new InputStreamReader(uc.getInputStream()); BufferedReader br= new BufferedReader(in); while(br.ready()) { String next = br.readLine(); sb.append(next); } return sb.toString(); } although I dont read until I get the response code, is it possible that the first time I call br.ready() that I call it before it is ready, and therefore I don't read the input EDIT 2: Changing above code to simply String line; while ((line = br.readLine()) != null) { sb.append(line); } resolved the issue.

    Read the article

  • seg fault at the end of program after executing everything?

    - by Fantastic Fourier
    Hello all, I wrote a quick program which executes every statement before giving a seg fault error. struct foo { int cat; int * dog; }; void bar (void * arg) { printf("o hello bar\n"); struct foo * food = (struct foo *) arg; printf("cat meows %i\n", food->cat); printf("dog barks %i\n", *(food->dog)); } void main() { int cat = 4; int * dog; dog = &cat; printf("cat meows %i\n", cat); printf("dog barks %i\n", *dog); struct foo * food; food->cat = cat; food->dog = dog; printf("cat meows %i\n", food->cat); printf("dog barks %i\n", *(food->dog)); printf("time for foo!\n"); bar(food); printf("begone!\n"); cat = 5; printf("cat meows %i\n", cat); printf("dog barks %i\n", *dog); // return 0; } which gives a result of cat meows 4 dog barks 4 cat meows 4 dog barks 4 time for foo! o hello bar cat meows 4 dog barks 4 begone! cat meows 5 dog barks 5 Segmentation fault (core dumped) I'm not really sure why it seg faults at the end? Any comments/insights are deeply appreciated.

    Read the article

  • How to correctly waitFor() a saveScreenShot() end of execution.

    - by Alain
    Here is my full first working test: var expect = require('chai').expect; var assert = require('assert'); var webdriverjs = require('webdriverjs'); var client = {}; var webdriverOptions = { desiredCapabilities: { browserName: 'phantomjs' }, logLevel: 'verbose' }; describe('Test mysite', function(){ before(function() { client = webdriverjs.remote( webdriverOptions ); client.init(); }); var selector = "#mybodybody"; it('should see the correct title', function(done) { client.url('http://localhost/mysite/') .getTitle( function(err, title){ expect(err).to.be.null; assert.strictEqual(title, 'My title page' ); }) .waitFor( selector, 2000, function(){ client.saveScreenshot( "./ExtractScreen.png" ); }) .waitFor( selector, 7000, function(){ }) .call(done); }); after(function(done) { client.end(done); }); }); Ok, it does not do much, but after working many hours to get the environement correctly setup, it passed. Now, the only way I got it working is by playing with the waitFor() method and adjust the delays. It works, but I still do not understand how to surely wait for a png file to be saved on disk. As I will deal with tests orders, I will eventually get hung up from the test script before securely save the file. Now, How can I improve this screen save sequence and avoid loosing my screenshot ? Thanks.

    Read the article

  • How to solve docbuiler saxexception: unexpected end of document?

    - by user211992
    I have a service that gives some car information in an xml format. <?xml version="1.0" encoding='UTF-8'?> <car> <id>5</id> <name>qwer</name> </car> <car> <id>6</id> <name>qwert</name> </car> Now the problem that I'm having is that my DocumentBuilderFactory docBuilderFactory = DocumentBuilderFactory.newInstance(); DocumentBuilder docBuilder = docBuilderFactory.newDocumentBuilder(); Document doc = docBuilder.parse(xml); Sometimes throws a SAXException (sometimes it works just fine, but when I reboot the server (still in development) I sometimes keep getting it) with as cause SAXException: unexpected end of document. But when I place a bufferreader there to see what it's receiving and I copy the value into an xml document and I open it in firefox/ie it looks just fine.

    Read the article

  • How to calculate the normal of points on a 3D cubic Bézier curve given normals for its start and end points?

    - by Robert
    I'm trying to render a "3D ribbon" using a single 3D cubic Bézier curve to describe it (the width of the ribbon is some constant). The first and last control points have a normal vector associated with them (which are always perpendicular to the tangents at those points, and describe the surface normal of the ribbon at those points), and I'm trying to smoothly interpolate the normal vector over the course of the curve. For example, given a curve which forms the letter 'C', with the first and last control points both having surface normals pointing upwards, the ribbon should start flat, parallel to the ground, slowly turn, and then end flat again, facing the same way as the first control point. To do this "smoothly", it would have to face outwards half-way through the curve. At the moment (for this case), I've only been able to get all the surfaces facing upwards (and not outwards in the middle), which creates an ugly transition in the middle. It's quite hard to explain, I've attached some images below of this example with what it currently looks like (all surfaces facing upwards, sharp flip in the middle) and what it should look like (smooth transition, surfaces slowly rotate round). Silver faces represent the front, black faces the back. Incorrect, what it currently looks like: Correct, what it should look like: All I really need is to be able to calculate this "hybrid normal vector" for any point on the 3D cubic bézier curve, and I can generate the polygons no problem, but I can't work out how to get them to smoothly rotate round as depicted. Completely stuck as to how to proceed!

    Read the article

  • Google Chrome Extension : Port: Could not establish connection. Receiving end does not exist

    - by tcornelis
    I have been looking for an answer for almost a week now, but having read all the stackoverflow items i can't seem to find a solution that is working for me. The error that i'm having is : Port: Could not establish connection. Receiving end does not exist. lastError:30 set lastError:30 dispatchOnDisconnect messaging:277 folder layout : img developer_icon.png js sidebar.js main.js jquery-2.0.3.js manifest.json my the manifest.json file looks something like this (it is version 2) :` "browser_action": { "default_icon": "./img/developer_icon.png" }, "content_scripts": [ { "matches": ["*://*/*"], "js": ["./js/sidebar.js"], "run_at": "document_end" } ], "background" : { "scripts" : ["./js/main.js","./js/jquery-2.0.3.js"] }, I want to handle the user clicking the extension icon so i could inject a sidebar in the existing website (because the extension i would like to develop requires that amount of space). So in main.js : chrome.browserAction.onClicked.addListener(function(tab) { chrome.tabs.getSelected(null, function(tab){ chrome.tabs.sendMessage( //Selected tab id tab.id, //Params inside a object data {callFunction: "toggleSidebar"}, //Optional callback function function(response) { console.log(response); } ); }); }); and in sidebar.js : chrome.runtime.onMessage.addListener(function(req,sender,sendResponse){ console.log("sidebar handling request"); toggleSidebar(); }); but i'm never able to see the console.log in my console because of the error. Does someone know what i did wrong? Thanks in advance!

    Read the article

  • Looking for an email template engine for end-users ...

    - by RizwanK
    We have a number of customers that we have to send monthly invoices too. Right now, I'm managing a codebase that does SQL queries against our customer database and billing database and places that data into emails - and sends it. I grow weary of maintaining this every time we want to include a new promotion or change our customer service phone numbers. So, I'm looking for a replacement to move more of this into the hands of those requesting the changes. In my ideal world, I need : A WYSIWYG (man, does anyone even say that anymore?) email editor that generates templates based upon the output from a Database Query. The ability to drag and drop various fields from the database query into the email template. Display of sample email results with the database query. Web application, preferably not requiring IIS. Involve as little code as possible for the end-user, but allow basic functionality (i.e. arrays/for loops) Either comes with it's own email delivery engine, or writes output in a way that I can easily write a Python script to deliver the email. Support for generic Database Connectors. (I need MSSQL and MySQL) F/OSS So ... can anyone suggest a project like this, or some tools that'd be useful for rolling my own? (My current alternative idea is using something like ERB or Tenjin, having them write the code, but not having live-preview for the editor would suck...)

    Read the article

  • What can cause a spontaneous EPIPE error without either end calling close() or crashing?

    - by Hongli
    I have an application that consists of two processes (let's call them A and B), connected to each other through Unix domain sockets. Most of the time it works fine, but some users report the following behavior: A sends a request to B. This works. A now starts reading the reply from B. B sends a reply to A. The corresponding write() call returns an EPIPE error, and as a result B close() the socket. However, A did not close() the socket, nor did it crash. A's read() call returns 0, indicating end-of-file. A thinks that B prematurely closed the connection. Users have also reported variations of this behavior, e.g.: A sends a request to B. This works partially, but before the entire request is sent A's write() call returns EPIPE, and as a result A close() the socket. However B did not close() the socket, nor did it crash. B reads a partial request and then suddenly gets an EOF. The problem is I cannot reproduce this behavior locally at all. I've tried OS X and Linux. The users are on a variety of systems, mostly OS X and Linux. Things that I've already tried and considered: Double close() bugs (close() is called twice on the same file descriptor): probably not as that would result in EBADF errors, but I haven't seen them. Increasing the maximum file descriptor limit. One user reported that this worked for him, the rest reported that it did not. What else can possibly cause behavior like this? I know for certain that neither A nor B close() the socket prematurely, and I know for certain that neither of them have crashed because both A and B were able to report the error. It is as if the kernel suddenly decided to pull the plug from the socket for some reason.

    Read the article

  • How do Oracle Forms compare to Microsoft Access as a "front-end"?

    - by webworm
    I recently started a project where I was set to build an ADP based application in Access 2003. The font end GUI was going to be in Access while all the data resided in MS SQL Server. I say "was", because the powers that be have decided that Oracle Forms might be a better choice than Access and SQL Server. The place where I am doing this work is an Oracle shop where they use Oracle 10g. They also use Oracle Forms quite a bit internally. As for me I am always up for learning anything new. I have always been a rather "eclectic" developer (I work with .NET WinForms, ASP.NET, Java, C#, Python, and Access) so I would not mind moving to Oracle Forms as long as it could do the same things as MS Access (hopefully even more as VBA is rather limited). So my question is this. How does Oracle Forms (10g) compare to MS Access for developing a GUI application? Access uses VBA for it's language, what does Oracle Forms use? I know the Forms app is a Java applet. Does that means you can write Oracle Forms using Java?

    Read the article

  • Should I be worried if I don't get any internships by 3rd year's end?

    - by karamba
    I am in some mediocre college in some corner of India. Am about to complete 3rd year C.S. in a month and a half. I have no idea how to go about "finding an internship" as everyone seems to put it. Looking at online advice, I find that a primary way is to "use your contacts". I am sad to say that I don't have many friends(those I have, I am trying to get help from them for all it's worth), and my family can't help me as they have no idea about the software industry. My college has no official facility for aiding students in this, and the few faculty members who had contacts in "whatever" part of the industry have favoured some students that they have personally come to know. (Though I hear that the "internships" they got involve them stocking equipment in some small companies.... still it's something?) I'm getting nervous. I am considering just spending the coming summer refining my skills in C++ and begin learning MySQL and C#, both of which I have zero experience in. Maybe work on my own project... like a library management system. Relative to those in my college, I think I am among the best programmers there, but that isn't saying much as a lot of students can barely write basic code. I have experience in teaching myself C++, and DirectX9 having created a Tetris clone, some basic 3D apps (bouncing balls), and a basic console-based, text-file-database-using library management system (which I plan to improve this summer). Is it alright if I spend my summer so? Will I be able to get a job later on? I know I have to improve my social skills to get anywhere in life, and I will try, but say I am stuck like this till 4th year's end... will such self studying, online learning help me in landing a decent job? Perhaps after I have learned a bit more, joining some open source project?

    Read the article

  • Looking for an email/report templating engine with database backend - for end-users ...

    - by RizwanK
    We have a number of customers that we have to send monthly invoices too. Right now, I'm managing a codebase that does SQL queries against our customer database and billing database and places that data into emails - and sends it. I grow weary of maintaining this every time we want to include a new promotion or change our customer service phone numbers. So, I'm looking for a replacement to move more of this into the hands of those requesting the changes. In my ideal world, I need : A WYSIWYG (man, does anyone even say that anymore?) email editor that generates templates based upon the output from a Database Query. The ability to drag and drop various fields from the database query into the email template. Display of sample email results with the database query. Web application, preferably not requiring IIS. Involve as little code as possible for the end-user, but allow basic functionality (i.e. arrays/for loops) Either comes with it's own email delivery engine, or writes output in a way that I can easily write a Python script to deliver the email. Support for generic Database Connectors. (I need MSSQL and MySQL) F/OSS So ... can anyone suggest a project like this, or some tools that'd be useful for rolling my own? (My current alternative idea is using something like ERB or Tenjin, having them write the code, but not having live-preview for the editor would suck...)

    Read the article

  • Delphi Indy IDHTTP question

    - by user327175
    I am trying to get the captcha image from a AOL, and i keep getting an error 418. unit imageunit; /// /// h t t p s://new.aol.com/productsweb/ /// interface uses Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms, Dialogs, StdCtrls, IdIOHandler, IdIOHandlerSocket, IdIOHandlerStack, IdSSL, IdSSLOpenSSL, IdIntercept, IdZLibCompressorBase, IdCompressorZLib, IdCookieManager, IdBaseComponent, IdComponent, IdTCPConnection, IdTCPClient, IdHTTP,jpeg,GIFImg, ExtCtrls; type TForm2 = class(TForm) IdHTTP1: TIdHTTP; IdCookieManager1: TIdCookieManager; IdCompressorZLib1: TIdCompressorZLib; IdConnectionIntercept1: TIdConnectionIntercept; IdSSLIOHandlerSocketOpenSSL1: TIdSSLIOHandlerSocketOpenSSL; Panel1: TPanel; Image1: TImage; Panel2: TPanel; Button1: TButton; Edit1: TEdit; procedure Button1Click(Sender: TObject); private { Private declarations } public { Public declarations } end; var Form2: TForm2; implementation {$R *.dfm} procedure TForm2.Button1Click(Sender: TObject); var JPI : TJPEGImage; streamdata:TMemoryStream; begin streamdata := TMemoryStream.Create; try idhttp1.Get(edit1.Text, Streamdata); Except { Handle exceptions } On E : Exception Do Begin MessageDlg('Exception: '+E.Message,mtError, [mbOK], 0); End; End; //h t t p s://new.aol.com/productsweb/WordVerImage?20890843 //h t t p s://new.aol.com/productsweb/WordVerImage?91868359 /// /// gives error 418 unused /// streamdata.Position := 0; JPI := TJPEGImage.Create; Try JPI.LoadFromStream ( streamdata ); Finally Image1.Picture.Assign ( JPI ); JPI.Free; streamdata.Free; End; end; end. Form: object Form2: TForm2 Left = 0 Top = 0 Caption = 'Form2' ClientHeight = 247 ClientWidth = 480 Color = clBtnFace Font.Charset = DEFAULT_CHARSET Font.Color = clWindowText Font.Height = -11 Font.Name = 'Tahoma' Font.Style = [] OldCreateOrder = False PixelsPerInch = 96 TextHeight = 13 object Panel1: TPanel Left = 0 Top = 41 Width = 480 Height = 206 Align = alClient TabOrder = 0 ExplicitLeft = -8 ExplicitTop = 206 ExplicitHeight = 41 object Image1: TImage Left = 1 Top = 1 Width = 478 Height = 204 Align = alClient ExplicitLeft = 5 ExplicitTop = 17 ExplicitWidth = 200 ExplicitHeight = 70 end end object Panel2: TPanel Left = 0 Top = 0 Width = 480 Height = 41 Align = alTop TabOrder = 1 ExplicitLeft = 40 ExplicitTop = 32 ExplicitWidth = 185 object Button1: TButton Left = 239 Top = 6 Width = 75 Height = 25 Caption = 'Button1' TabOrder = 0 OnClick = Button1Click end object Edit1: TEdit Left = 16 Top = 8 Width = 217 Height = 21 TabOrder = 1 end end object IdHTTP1: TIdHTTP Intercept = IdConnectionIntercept1 IOHandler = IdSSLIOHandlerSocketOpenSSL1 MaxAuthRetries = 100 AllowCookies = True HandleRedirects = True RedirectMaximum = 100 ProxyParams.BasicAuthentication = False ProxyParams.ProxyPort = 0 Request.ContentLength = -1 Request.Accept = 'image/gif, image/jpeg, image/pjpeg, image/pjpeg, application/x-s' + 'hockwave-flash, application/cade, application/xaml+xml, applicat' + 'ion/vnd.ms-xpsdocument, application/x-ms-xbap, application/x-ms-' + 'application, /' Request.BasicAuthentication = False Request.Referer = 'http://www.yahoo.com' Request.UserAgent = 'Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.2.1) Gecko/201001' + '22 firefox/3.6.1' HTTPOptions = [hoForceEncodeParams] CookieManager = IdCookieManager1 Compressor = IdCompressorZLib1 Left = 240 Top = 80 end object IdCookieManager1: TIdCookieManager Left = 360 Top = 136 end object IdCompressorZLib1: TIdCompressorZLib Left = 368 Top = 16 end object IdConnectionIntercept1: TIdConnectionIntercept Left = 304 Top = 72 end object IdSSLIOHandlerSocketOpenSSL1: TIdSSLIOHandlerSocketOpenSSL Intercept = IdConnectionIntercept1 MaxLineAction = maException Port = 0 DefaultPort = 0 SSLOptions.Mode = sslmUnassigned SSLOptions.VerifyMode = [] SSLOptions.VerifyDepth = 0 Left = 192 Top = 136 end end If you go to: h t t p s://new.aol.com/productsweb/ you will notice the captcha image has a url like: h t t p s://new.aol.com/productsweb/WordVerImage?91868359 I put that url in the edit box and get an error. What is wrong with this code.

    Read the article

  • Using dispatchertimer in combination with an asynchroneous call

    - by Civelle
    Hi. We have an issue in our Silverlight application which uses WCF and Entity Framework, where we need to trap the event whenever a user shuts down the application by closing the web page or the browser instead of closing the silverlight application. This is in order to verify if any changes have been made, in which case we would ask the user if he wants to save before leaving. We were able to accomplish the part which consists in trapping the closing of the web page: we wrote some code in the application object that have the web page call a method in the silverlight application object. The problem starts when in this method, we do an asynchroneous call to the Web Service to verify if changes have occured (IsDirty). We are using a DispatcherTimer to check for the return of the asynchroneous call. The problem is that the asynchroneous call never completes (in debug mode, it never ends up stepping into the _BfrServ_Customer_IsDirtyCompleted method), while it used to work fine before we added this new functionality. You will find belowthe code we are using. I am new to writing timers in combination with asynchroneous call so I may be doing something wrong but I cannot figure out what. I tried other things also but we without any success.. ====================== CODE ============================================== 'Code in the application object Public Sub New() InitializeComponent() RegisterOnBeforeUnload() _DispatcherTimer.Interval = New TimeSpan(0, 0, 0, 0, 500) End Sub Public Sub RegisterOnBeforeUnload() 'Register Silverlight object for availability in Javascript. Const scriptableObjectName As String = "Bridge" HtmlPage.RegisterScriptableObject(scriptableObjectName, Me) 'Start listening to Javascript event. Dim pluginName As String = HtmlPage.Plugin.Id HtmlPage.Window.Eval(String.Format("window.onbeforeunload = function () {{ var slApp = document.getElementById('{0}'); var result = slApp.Content.{1}.OnBeforeUnload(); if(result.length 0)return result;}}", pluginName, scriptableObjectName)) End Sub Public Function OnBeforeUnload() As String Dim userControls As List(Of UserControl) = New List(Of UserControl) Dim test As Boolean = True If CType(Me.RootVisual, StartPage).LayoutRoot.Children.Item(0).GetType().Name = "MainPage" Then If Not CType(CType(Me.RootVisual, StartPage).LayoutRoot.Children.Item(0), MainPage).FindName("Tab") Is Nothing Then If CType(CType(Me.RootVisual, StartPage).LayoutRoot.Children.Item(0), MainPage).FindName("Tab").Items.Count = 1 Then For Each item As TabItem In CType(CType(Me.RootVisual, StartPage).LayoutRoot.Children.Item(0), MainPage).Tab.Items If item.Content.GetType().Name = "CustomerDetailUI" _Item = item WaitHandle = New AutoResetEvent(False) DoAsyncCall() Exit End If Next End If End If End If If _IsDirty = True Then Return "Do you want to save before leaving." Else Return String.Empty End If End Function Private Sub DoAsyncCall() _Item.Content.CheckForIsDirty(WaitHandle) 'This code resides in the CustomerDetailUI UserControl - see below for the code End Sub Private Sub _DispatcherTimer_Tick(ByVal sender As Object, ByVal e As System.EventArgs) Handles _DispatcherTimer.Tick If Not _Item.Content._IsDirtyCompleted = True Then Exit Sub End If _DispatcherTimerRunning = False _DispatcherTimer.Stop() ProcessAsyncCallResult() End Sub Private Sub ProcessAsyncCallResult() _IsDirty = _Item.Content._IsDirty End Sub 'CustomerDetailUI code Public Sub CheckForIsDirty(ByVal myAutoResetEvent As AutoResetEvent) _AutoResetEvent = myAutoResetEvent _BfrServ.Customer_IsDirtyAsync(_Customer) 'This method initiates asynchroneous call to the web service - all the details are not shown here _AutoResetEvent.WaitOne() End Sub Private Sub _BfrServ_Customer_IsDirtyCompleted(ByVal sender As Object, ByVal e As BFRService.Customer_IsDirtyCompletedEventArgs) Handles _BfrServ.Customer_IsDirtyCompleted If _IsDirtyFromRefesh Then _IsDirtyFromRefesh = False If e.Result = True Then Me.Confirm("This customer has been modified. Are you sure you want to refresh your data ? " & vbNewLine & " Your changes will be lost.", "Yes", "No", Message.CheckIsDirtyRefresh) End If Busy.IsBusy = False Else If e.Result = True Then _IsDirty = True Me.Confirm("This customer has been modified. Would you like to save?", "Yes", "No", Message.CheckIsDirty) Else Me.Tab.Items.Remove(Me.Tab.SelectedItem) Busy.IsBusy = False End If End If _IsDirtyCompleted = True _AutoResetEvent.Set() End Sub

    Read the article

  • rails: "unknown action" message when action is clearly specified

    - by john
    hi, I had hard time to figure out why I've been getting "unknown action" error message when I was do some editing: Unknown action No action responded to 11. Actions: bin, create, destroy, edit, index, new, observe_new, show, tag, update, and vote you can see that Rails did mention each action in the above list - update. And in my form, I did specify action = "update". I wonder if some friends could kindly help me with the missing links... here is the code: edit.rhtml <h1>Editing tip</h1> <% form_tag :action => 'update', :id => @tip do %> <%= render :partial => 'form' %> <p> <%= submit_tag_or_cancel 'Save Changes' %> </p> <% end %> _form.rhtml <%= error_messages_for :tip %> <p><label>Title<br/> <%= text_field :tip, :title %></label></p> <p><label>Categories<br/> <%= select_tag('categories[]', options_for_select(Category.find(:all).collect {|c| [c.name, c.id] }, @tip.category_ids), :multiple => true ) %></label></p> <p><label>Abstract:<br/> <%= text_field_with_auto_complete :tip, :abstract %></label></p> <p><label>Name: <br/> <%= text_field :tip, :name %></label></p> <p><label>Link: <br/> <%= text_field :tip, :link %></label></p> <p><label>Content<br/> <%= text_area :tip, :content, :rows => 5 %></label></p> <p><label>Tags <span>(space separated)</span><br/> <%= text_field_tag 'tags', @tip.tag_list, :size => 40 %></label></p> class TipsController < ApplicationController before_filter :authenticate, :except => %w(index show) # GET /tips # GET /tips.xml def index @tips = Tip.all respond_to do |format| format.html # index.html.erb format.xml { render :xml => @tips } end end # GET /tips/1 # GET /tips/1.xml def show @tip = Tip.find_by_permalink(params[:permalink]) respond_to do |format| format.html # show.html.erb format.xml { render :xml => @tip } end end # GET /tips/new # GET /tips/new.xml def new @tip = session[:tip_draft] || current_user.tips.build end def create #tip = current_user.tips.build(params[:tip]) #tipMail=params[:email] #if tipMail # TipMailer.deliver_email_friend(params[:email], params[:name], tip) # flash[:notice] = 'Your friend has been notified about this tip' #end @tip = current_user.tips.build(params[:tip]) @tip.categories << Category.find(params[:categories]) unless params[:categories].blank? @tip.tag_with(params[:tags]) if params[:tags] if @tip.save flash[:notice] = 'Tip was successfully created.' session[:tip_draft] = nil redirect_to :action => 'index' else render :action => 'new' end end def edit @tip = Tip.find(params[:id]) end def update @tip = Tip.find(params[:id]) respond_to do |format| if @tip.update_attributes(params[:tip]) flash[:notice] = 'Tip was successfully updated.' format.html { redirect_to(@tip) } format.xml { head :ok } else format.html { render :action => "edit" } format.xml { render :xml => @tip.errors, :status => :unprocessable_entity } end end end def destroy @tip = Tip.find(params[:id]) @tip.destroy respond_to do |format| format.html { redirect_to(tips_url) } format.xml { head :ok } end end def observe_new session[:tip_draft] = current_user.tips.build(params[:tip]) render :nothing => true end end

    Read the article

  • Need to set cursor position to the end of a contentEditable div, issue with selection and range obje

    - by DavidR
    I'm forgetting about cross-browser compatibility for the moment, I just want this to work. What I'm doing is trying to modify a script (and you probably don't need to know this) located at typegreek.com The basic script is found here. Basically what it does is when you type in characters, it converts the character your are typing into greek characters and prints it onto the screen. What I'm trying to do is to get it to work on contentEditable div's (It only works for Textareas) My issue is with this one function: The user types a key, it get's converted to a greek key, and goes to a function, it gets sorted through some if's, and where it ends up is where I can add div support. Here is what I have so far, myField is the div, myValue is the greek character. //Get selection object... var userSelection if (window.getSelection) {userSelection = window.getSelection();} else if (document.selection) {userSelection = document.selection.createRange();} //Now get the cursor position information... var startPos = userSelection.anchorOffset; var endPos = userSelection.focusOffset; var cursorPos = endPos; //Needed later when reinserting the cursor... var rangeObj = userSelection.getRangeAt(0) var container = rangeObj.startContainer //Now take the content from pos 0 -> cursor, add in myValue, then insert everything after myValue to the end of the line. myField.textContent = myField.textContent.substring(0, startPos) + myValue + myField.textContent.substring(endPos, myField.textContent.length); //Now the issue is, this updates the string, and returns the cursor to the beginning of the div. //so that at the next keypress, the character is inserted into the beginning of the div. //So we need to reinsert the cursor where it was. //Re-evaluate the cursor position, taking into account the added character. var cursorPos = endPos + myValue.length; //Set the caracter position. rangeObj.setStart(container,cursorPos) Now, this works only as long as I don't type more than the size of the original text. Say I had 30 characters in the div before hand. If I type more than that 30, it adds character 31, but places the cursor back at 30. I can type character 32 at pos.31, then character 33 at pos.32, but if I try to put character 34 in, it adds the character, and sets the cursor back at 32. The issue is that the function for adding the new character screws up if cursorPos is greater than what is defined in the range. Any ideas?

    Read the article

  • Extend argparse to write set names in the help text for optional argument choices and define those sets once at the end

    - by Kent
    Example of the problem If I have a list of valid option strings which is shared between several arguments, the list is written in multiple places in the help string. Making it harder to read: def main(): elements = ['a', 'b', 'c', 'd', 'e', 'f'] parser = argparse.ArgumentParser() parser.add_argument( '-i', nargs='*', choices=elements, default=elements, help='Space separated list of case sensitive element names.') parser.add_argument( '-e', nargs='*', choices=elements, default=[], help='Space separated list of case sensitive element names to ' 'exclude from processing') parser.parse_args() When running the above function with the command line argument --help it shows: usage: arguments.py [-h] [-i [{a,b,c,d,e,f} [{a,b,c,d,e,f} ...]]] [-e [{a,b,c,d,e,f} [{a,b,c,d,e,f} ...]]] optional arguments: -h, --help show this help message and exit -i [{a,b,c,d,e,f} [{a,b,c,d,e,f} ...]] Space separated list of case sensitive element names. -e [{a,b,c,d,e,f} [{a,b,c,d,e,f} ...]] Space separated list of case sensitive element names to exclude from processing What would be nice It would be nice if one could define an option list name, and in the help output write the option list name in multiple places and define it last of all. In theory it would work like this: def main_optionlist(): elements = ['a', 'b', 'c', 'd', 'e', 'f'] # Two instances of OptionList are equal if and only if they # have the same name (ALFA in this case) ol = OptionList('ALFA', elements) parser = argparse.ArgumentParser() parser.add_argument( '-i', nargs='*', choices=ol, default=ol, help='Space separated list of case sensitive element names.') parser.add_argument( '-e', nargs='*', choices=ol, default=[], help='Space separated list of case sensitive element names to ' 'exclude from processing') parser.parse_args() And when running the above function with the command line argument --help it would show something similar to: usage: arguments.py [-h] [-i [ALFA [ALFA ...]]] [-e [ALFA [ALFA ...]]] optional arguments: -h, --help show this help message and exit -i [ALFA [ALFA ...]] Space separated list of case sensitive element names. -e [ALFA [ALFA ...]] Space separated list of case sensitive element names to exclude from processing sets in optional arguments: ALFA {a,b,c,d,e,f} Question I need to: Replace the {'l', 'i', 's', 't', 's'} shown with the option name, in the optional arguments. At the end of the help text show a section explaining which elements each option name consists of. So I ask: Is this possible using argparse? Which classes would I have to inherit from and which methods would I need to override? I have tried looking at the source for argparse, but as this modification feels pretty advanced I don´t know how to get going.

    Read the article

  • Rails Associations - Callback Sequence/Magic

    - by satynos
    Taking following association declaration as an example: class Post has_many :comments end Just by declaring the has_many :comments, ActiveRecord adds several methods of which I am particularly interested in comments which returns array of comments. I browsed through the code and following seems to be the callback sequence: def has_many(association_id, options = {}, &extension) reflection = create_has_many_reflection(association_id, options, &extension) configure_dependency_for_has_many(reflection) add_association_callbacks(reflection.name, reflection.options) if options[:through] collection_accessor_methods(reflection, HasManyThroughAssociation) else collection_accessor_methods(reflection, HasManyAssociation) end end def collection_accessor_methods(reflection, association_proxy_class, writer = true) collection_reader_method(reflection, association_proxy_class) if writer define_method("#{reflection.name}=") do |new_value| # Loads proxy class instance (defined in collection_reader_method) if not already loaded association = send(reflection.name) association.replace(new_value) association end define_method("#{reflection.name.to_s.singularize}_ids=") do |new_value| ids = (new_value || []).reject { |nid| nid.blank? } send("#{reflection.name}=", reflection.class_name.constantize.find(ids)) end end end def collection_reader_method(reflection, association_proxy_class) define_method(reflection.name) do |*params| force_reload = params.first unless params.empty? association = association_instance_get(reflection.name) unless association association = association_proxy_class.new(self, reflection) association_instance_set(reflection.name, association) end association.reload if force_reload association end define_method("#{reflection.name.to_s.singularize}_ids") do if send(reflection.name).loaded? || reflection.options[:finder_sql] send(reflection.name).map(&:id) else send(reflection.name).all(:select => "#{reflection.quoted_table_name}.#{reflection.klass.primary_key}").map(&:id) end end end In this sequence of callbacks, where exactly is the actual SQL being executed for retrieving the comments when I do @post.comments ?

    Read the article

  • ASP.NET trace level

    - by axk
    This question is related to my another question. With trace enabled I can get the following(not quite verbose) trace of a page request: [2488] aspx.page: Begin PreInit [2488] aspx.page: End PreInit [2488] aspx.page: Begin Init [2488] aspx.page: End Init [2488] aspx.page: Begin InitComplete [2488] aspx.page: End InitComplete [2488] aspx.page: Begin PreLoad [2488] aspx.page: End PreLoad [2488] aspx.page: Begin Load [2488] aspx.page: End Load [2488] aspx.page: Begin LoadComplete [2488] aspx.page: End LoadComplete [2488] aspx.page: Begin PreRender [2488] aspx.page: End PreRender [2488] aspx.page: Begin PreRenderComplete [2488] aspx.page: End PreRenderComplete [2488] aspx.page: Begin SaveState [2488] aspx.page: End SaveState [2488] aspx.page: Begin SaveStateComplete [2488] aspx.page: End SaveStateComplete [2488] aspx.page: Begin Render [2488] aspx.page: End Render Reflector shows that System.Web.UI.Page.ProcessRequestMain method which I suppose does the main part of request processing has more conditional trace messges. For example: if (context.TraceIsEnabled) { this.Trace.Write("aspx.page", "Begin PreInit"); } if (EtwTrace.IsTraceEnabled(5, 4)) { EtwTrace.Trace(EtwTraceType.ETW_TYPE_PAGE_PRE_INIT_ENTER, this._context.WorkerRequest); } this.PerformPreInit(); if (EtwTrace.IsTraceEnabled(5, 4)) { EtwTrace.Trace(EtwTraceType.ETW_TYPE_PAGE_PRE_INIT_LEAVE, this._context.WorkerRequest); } if (context.TraceIsEnabled) { this.Trace.Write("aspx.page", "End PreInit"); } if (context.TraceIsEnabled) { this.Trace.Write("aspx.page", "Begin Init"); } if (EtwTrace.IsTraceEnabled(5, 4)) { EtwTrace.Trace(EtwTraceType.ETW_TYPE_PAGE_INIT_ENTER, this._context.WorkerRequest); } this.InitRecursive(null); So there are these EwtTrace.Trace messages which I don't see I the trace. Going deeper with Reflector shows that EtwTrace.IsTraceEnabled is checking if the appropriate tracelevel set: internal static bool IsTraceEnabled(int level, int flag) { return ((level < _traceLevel) && ((flag & _traceFlags) != 0)); } So the question is how do I control these _traceLevel and _traceFlags and where should these trace messages ( EtwTrace.Trace ) go? The code I'm looking at is of .net framework 2.0 @Edit: I guess I should start with ETW Tracing MSDN entry.

    Read the article

  • ASP.NET MVC Patterns

    - by Sam Striano
    Hello, I am fairly new to MVC, but after playing with it (MVC 3/Razor), I am hooked. I have a few questions: 1) What is the best, or most widely used pattern to develop MVC apps in? Repository, DDD, UOW? 2) I am using the Entity Framework 4, so could some please explain to me or point me to a good source that will explain the Repository Pattern w/EF4? Doesn't EF4 take place as the business layer and the data access layer? Does the Repository Pattern even provide a benefit? 3) Also, one last question, could someone explain the whole relationship between the Controller, the Model and the View? I get the basics, but maybe a little more in depth of the correct way to use it. View Models - Say I have a view that displays customer info, and one that edits it, should I have a view model and an edit model, or can the be passed around? 4) Examples?? Thanks for the help up front, $("Sam") ** EDIT ** Am I on the right track here: Public Class HomeController Inherits System.Web.Mvc.Controller Function Index(ByVal id As Integer) As ActionResult Return View(New HomeModel) End Function <HttpPost()> _ Function Index(ByVal Model As HomeModel) As ActionResult Return View(Model) End Function End Class Public Class HomeModel Private _Repository As IRepository(Of Customer) Public Property Customer As Customer Public Sub New() End Sub Public Sub New(ByVal ID As Integer) _Repository = New CustomerRepository Customer = _Repository.GetByID(ID) End Sub End Class Public Interface IRepository(Of T) Function GetByID(ByVal ID As Integer) As T Sub Add(ByVal Entity As T) Sub Delete(ByVal Entity As T) End Interface Public Class CustomerRepository Implements IRepository(Of Customer) Public Sub Add(ByVal Entity As Customer) Implements IRepository(Of Customer).Add End Sub Public Sub Delete(ByVal Entity As Customer) Implements IRepository(Of Customer).Delete End Sub Public Function GetByID(ByVal ID As Integer) As Customer Implements IRepository(Of Customer).GetByID Return New Customer With {.ID = ID, .FirstName = "Sam", .LastName = "Striano"} End Function End Class Public Class Customer Public Property ID As Integer Public Property FirstName As String Public Property LastName As String End Class

    Read the article

  • about option buttons in User form

    - by Mars
    I have a question: I need to create a user form that contain that usual OK and Cancel Buttons. It also should contain two sets of Options buttons, each set placed inside a frame. The captions on the first set should be basketball, baseball, football, the captions on the second set should be watch on TV and Go to games. I need to write the event handlers and code in a module so that when the program runs, the user sees the form. If the user makes a couple of choices and clicks OK, he should see a message like "Your favorite sport is basketball, and you usually watch on TV." If the user clicks Cancel, the message "Sorry you don't want to play" should appear. I think I almost have it working, but I don't know why I cannot successfully execute the Macro. My Code is : Option Explicit Private Sub CommandButton2_Click() MsgBox ("sorry if you don't want to play") End Sub Private Sub commandbuttons_Click() Dim optbasket As String, optbaseball As String, optfootball As String Dim optwog As String, optgtg As String Select Case True Case optbasket optbasket = True Case optbaseball optbaseball = True Case optfootball optfootball = True End Select If optwog Then optwog = True Else optgtg = True End If btnok = MsgBox("you favorite sport is " & Frame1.Value & "you usually " & Frame2.Value & ",") End Sub Private Sub OptionButton1_Click() End Sub Private Sub btmcancel_Click() End Sub Private Sub btnok_Click() End Sub Private Sub Frame1_Click() End Sub Private Sub Frame2_Click() End Sub Private Sub optbaseball_Click() End Sub Private Sub optbasketball_Click() End Sub Private Sub optfootball_Click() End Sub Thank you very much!!!

    Read the article

  • Paperclip: Stay put on edit

    - by EricR
    When a user edits something in my application, they're forced to re-upload their image via paperclip even if they aren't changing it. Failing to do so will cause an error, since I validate_presence_of :image. This is quite annoying. How can I make it so Paperclip won't update its attributes if a user simply doesn't supply a new image on an edit? The photo controller is fresh out of Rails' scaffold generator. The rest of the source code is provided below. models/accommodation.rb class Accommodation < ActiveRecord::Base attr_accessible :photo validates_presence_of :photo has_one :photo has_many :notifications belongs_to :user accepts_nested_attributes_for :photo, :allow_destroy => true end controllers/accommodation_controller.rb class AccommodationsController < ApplicationController def index @accommodations = Accommodation.all end def show @accommodation = Accommodation.find(params[:id]) rescue ActiveRecord::RecordNotFound flash[:error] = "Accommodation not found." redirect_to :home end def new @accommodation = current_user.accommodations.build @accommodation.build_photo end def create @accommodation = current_user.accommodations.build(params[:accommodation]) if @accommodation.save flash[:notice] = "Successfully created your accommodation." redirect_to @accommodation else @accommodation.build_photo render :new end end def edit @accommodation = Accommodation.find(params[:id]) @accommodation.build_photo rescue ActiveRecord::RecordNotFound flash[:error] = "Accommodation not found." redirect_to :home end def update @accommodation = Accommodation.find(params[:id]) if @accommodation.update_attributes(params[:accommodation]) flash[:notice] = "Successfully updated accommodation." redirect_to @accommodation else @accommodation.build_photo render :edit end end def destroy @accommodation = Accommodation.find(params[:id]) @accommodation.destroy flash[:notice] = "Successfully destroyed accommodation." redirect_to :inkeep end end models/photo.rb class Photo < ActiveRecord::Base attr_accessible :image, :primary belongs_to :accommodation has_attached_file :image, :styles => { :thumb=> "100x100#", :small => "150x150>" } end

    Read the article

< Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >