Search Results

Search found 1516 results on 61 pages for 'cards'.

Page 42/61 | < Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >

• 12.04 wired network doesn't work RTL8111/8168B

  - by laket

  its a fresh 12.04 install 64bits. wifi works fine, wired stays off with cable connected and network-manager shows as if cable is disconnected. Turning off networking lights up my network-cards leds, turning networking on shuts off the leds and no communication is possible. I already tried, turning off the network-manager (sudo service network-manager stop) and setting up my eth0 manually, as soon as I switch off the network-manager my leds light up, but after setting up manually eth0 (sudo ifconfig eth0 10.2.10.114 netmask 255.255.0.0 up) the leds turn off again. I am still dual booting with 10.04 where I have no issues at all, leaving the cable connected all time to my notebook and a switch. Here is some hardware info: lshw: *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 03 serial: c8:0a:a9:d7:05:97 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl_nic/rtl8168d-2.fw latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:42 ioport:2000(size=256) memory:f0004000-f0004fff memory:f0000000-f0003fff memory:f0010000-f001ffff lspci: 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) ifconfig eth0: eth0 Link encap:Ethernet HWaddr c8:0a:a9:d7:05:97 inet addr:10.2.10.114 Bcast:10.2.255.255 Mask:255.255.0.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:42 Base address:0xc000 cat /etc/network/interfaces: (already tried here with and w/o eth0) auto lo eth0 iface lo inet loopback cat /etc/NetworkManager/NetworkManager.conf [main] plugins=ifupdown,keyfile dns=dnsmasq [ifupdown] managed=false Any help is welcome ;) Laket

  Read the article

• JavaOne 2012 Conference Preview

  - by Janice J. Heiss

  A new article, by noted freelancer Steve Meloan, now up on otn/java, titled “JavaOne 2012 Conference Preview,” looks ahead to the fast approaching JavaOne 2012 Conference, scheduled for September 30-October 4 in San Francisco. The Conference will celebrate and highlight one of the world’s leading technologies. As Meloan states, “With 9 million Java developers worldwide, 5 billion Java cards in use, 3 billion mobile phones running Java, 1 billion Java downloads each year, and 100 percent of Blu-ray disk players and 97 percent of enterprise desktops running Java, Java is a technology that literally permeates our world.”The 2012 JavaOne is organized under seven technical tracks:* Core Java Platform* Development Tools and Techniques* Emerging Languages on the JVM* Enterprise Service Architectures and the Cloud* Java EE Web Profile and Platform Technologies* Java ME, Java Card, Embedded, and Devices* JavaFX and Rich User ExperiencesConference keynotes will lay out the Java roadmap. For the Sunday keynote, such Oracle luminaries as Cameron Purdy, Vice President of Development; Nandini Ramani, Vice President of Engineering, Java Client and Mobile Platforms; Richard Bair, Chief Architect, Client Java Platform; and Mark Reinhold, Chief Architect, Java Platform will be presenting.For the Thursday IBM keynote, Jason McGee, Distinguished Engineer and Chief Architect for IBM PureApplication System, and John Duimovich, Java CTO and IBM Distinguished Engineer, will explore Java and IBM's cloud-based initiatives.All in all, the JavaOne 2012 Conference should be as exciting as ever.Link to the article here. Originally published on blogs.oracle.com/javaone.

  Read the article

• JavaOne 2012 Conference Preview

  - by Janice J. Heiss

  A new article, by noted freelancer Steve Meloan, now up on otn/java, titled “JavaOne 2012 Conference Preview,” looks ahead to the fast approaching JavaOne 2012 Conference, scheduled for September 30-October 4 in San Francisco. The Conference will celebrate and highlight one of the world’s leading technologies. As Meloan states, “With 9 million Java developers worldwide, 5 billion Java cards in use, 3 billion mobile phones running Java, 1 billion Java downloads each year, and 100 percent of Blu-ray disk players and 97 percent of enterprise desktops running Java, Java is a technology that literally permeates our world.” The 2012 JavaOne is organized under seven technical tracks: * Core Java Platform* Development Tools and Techniques* Emerging Languages on the JVM* Enterprise Service Architectures and the Cloud* Java EE Web Profile and Platform Technologies* Java ME, Java Card, Embedded, and Devices* JavaFX and Rich User Experiences Conference keynotes will lay out the Java roadmap. For the Sunday keynote, such Oracle luminaries as Cameron Purdy, Vice President of Development; Nandini Ramani, Vice President of Engineering, Java Client and Mobile Platforms; Richard Bair, Chief Architect, Client Java Platform; and Mark Reinhold, Chief Architect, Java Platform will be presenting. For the Thursday IBM keynote, Jason McGee, Distinguished Engineer and Chief Architect for IBM PureApplication System, and John Duimovich, Java CTO and IBM Distinguished Engineer, will explore Java and IBM's cloud-based initiatives.All in all, the JavaOne 2012 Conference should be as exciting as ever. Link to the article here.

  Read the article

• Grab a Copy of Plants vs. Zombies for Free; Courtesy of the ADA

  - by Jason Fitzpatrick

  In a rather unlikely pairing, PopCap Games and the American Dental Association have teamed up to give away copies of PopCap’s smash hit game Plants vs. Zombies; grab a copy for yourself and print off some game coupons to hand out at Halloween. At StopZombieMouth.com they explain the pairing: This Halloween, the ADA and PopCap Games are redefining what a Halloween “treat” can be… by giving FUN instead of candy. We’re giving away Plants vs. Zombies™ download games as a sugar-free alternative, and you can join in the fun. Ask if your local dentist has the limited-edition, collectible Plants vs. Zombies trading cards with the code for a free Plants vs. Zombies download game. Or, download printable free-game coupons here. Now go out and give PvZ fun as a Halloween treat to kids of all ages. And thanks for helping Stop Zombie Mouth! 7 Ways To Free Up Hard Disk Space On Windows HTG Explains: How System Restore Works in Windows HTG Explains: How Antivirus Software Works

  Read the article

• How to represent an agile project to people focused on waterfall [closed]

  - by ahsteele

  Our team has been asked to represent our development efforts in a project plan. No one is unhappy with our work or questioning our ability to deliver, we are just participating in an IT cattle call for project plans. Trouble is we are an agile team and haven't thought about our work in terms of a formal project plan. While we have a general idea of what we are working on next we aren't 100% sure until we plan an iteration. Until now our team has largely operated in a vacuum and has not been required to present our methodology or metrics to outside parties. We follow most of the practices espoused in Extreme Programming. We hold quarterly planning meetings to have a general idea of the stories we are going to work on for a quarter. That said, our stories are documented on 3x5 cards and are only estimated at the beginning of the iteration in which they are going to be worked. After estimation we document the story in Team Foundation Sever. During an iteration, we attach code to stories and mark stories as completed once finished. From this data we are able to generate burn down and velocity charts. Most importantly we know our average velocity for an iteration keeping us from biting off more than we can chew. I am not looking to modify the way we do development but want to present our development activities in a report that someone only familiar with waterfall will understand. In What Does an Agile Project Plan Look Like, Kent McDonald does a good job laying out the differences between agile and waterfall project plans. He specifies the differences in consumable bullets: An agile project plan is feature based An Agile Project Plan is organized into iterations An Agile Project Plan has different levels of detail depending on the time frame An Agile Project Plan is owned by the Team Being able to explain the differences is great, but how best to present the data?

  Read the article

• Secure Coding Practices in .NET

  - by SoftwareSecurity

  Thanks to everyone who helped pack the room at the Fox Valley Day of .NET.   This presentation was designed to help developers understand why secure coding is important, what areas to focus on and additional resources.  You can find the slides here. Remember to understand what you are really trying to protect within your application.  This needs to be a conversation between the application owner, developer and architect.  Understand what data (or Asset) needs to be protected.  This could be passwords, credit cards, Social Security Numbers.   This also may be business specific information like business confidential data etc.  Performing a Risk and Privacy Assessment & Threat Model on your applications even in a small way can help you organize this process. These are the areas to pay attention to when coding: Authentication & Authorization Logging & Auditing Event Handling Session and State Management Encryption Links requested Slides Books The Security Development Lifecycle: SDL: A Process for Developing Demonstrably More Secure Software Threat Modeling Writing Secure Code The Web Application Hackers Handbook  Secure Programming with Static Analysis   Other Resources: OWASP OWASP Top 10 OWASP WebScarab OWASP WebGoat Internet Storm Center Web Application Security Consortium Events: OWASP AppSec 2011 in Minneapolis

  Read the article

• How to cover the widest range of computers when publishing?

  - by DevilWithin

  When you plan a game, or even when you already made a game, and its time to publish, you wonder how much of your audience is covered by the game technology demands. I'm directing this essentialy to casual games, as I constantly see people having old laptops and being unable to replace them. Laptops with integrated cards whose OpenGL version doesn't even support textures larger than 1024x1024. These people may be avid gamers as well, and a reasonable share of the audience to consider giving them the chance to play casual games, once they cannot play any blockbusters. As I've seen happening, a very "noticeable" example is Angry Birds. It's gameplay is merely casual (I think nobody disagrees here) and still, it uses so high resolution textures that at least OpenGL 2.0 or around is needed, which blocks away a lot of people. So, the actual question is: what is a good tradeoff for this issue? Would it be better to just sacrifice the texture resolution for everyone, but have more supported hardware? Would it be better to keep the high quality and just slice the textures into smaller ones, sacrificing the performance a little bit? What else? Any ideas about this topic are welcome for discussion.

  Read the article

• Hybrid Graphics Functional won't work with my Asus UL30V anymore

  - by futuress

  The problem is that I am no longer able to boot in compatibility mode for just turning on my Nvidia graphics to install the driver. Because no login screen will appear if Ubuntu is loading. In Ubuntu 11.10 I was able to activate nvidia graphics only' option this way: 1) Change BIOS to 'compatibility mode' which will turn off the Intel card. 2) Install the Nvidia proprietary driver using Ubuntu's driver finder (Additional Drivers) and then reboot. I was not interested using only the Intel graphics, for the sake of battery life. Now I have both cards running and they drain my battery life dramatically. And the main problem of this configuration no OpenGL is available, so I can't play any games any more. At this point, I have a pre-solution. I uninstalled the nvidia drivers and installed bumblebee. Now the Intel card is recognized. I would prefer to run just the nvidia card as in Ubuntu 11.10 but for now this is better than nothing. Does anybody else have the same problem?

  Read the article

• What does "fully supported" mean in context of Radeon Opensource Video Driver?

  - by stevecoh1

  UPDATE: This is not a request for support of my specific issue. Details of that issue are here: How to recover from bad upgrade to 13.04 (Unity very slow) . I have "solved" that issue, for the time being anyway, by loading alternative lighter weight desktops. This question was opened specifically to question the meaning of the documentation at https://help.ubuntu.com/community/RadeonDriver . END OF UPDATE There it is, in Black and White: https://help.ubuntu.com/community/RadeonDriver Fully Supported All these Radeon(HD) cards and derivatives have good 3D acceleration support. This is not an exhaustive list: ... RV610/RV630 Radeon HD 2400/2600/2700/4200/4225/4250 Yet in my case (the HD2400) this proves to be manifestly untrue, at least if "Fully Supported" means sufficient to run Unity in Ubuntu 13.04. It runs all the applications I can launch under Unity, but Unity itself is unbearably slow. It's quite striking really. Click on the "Dash" - go get a cup of coffee. Type a key in the Unity search box, wait five seconds for it to appear. Type Alt-tab and wait five seconds for the screen to finish painting. None of these issues appear outside of Unity components. As you all know, there are complaints about slow performance all over the Internet about Unity. Shouldn't this page somehow address this issue? Especially if "fully supported" doesn't mean sufficiently to run the default modern Ubuntu release. What does "fully supported" mean?

  Read the article

• Correct nvidia+intel graphics setup in 14.04

  - by Espressofa

  Just upgraded to 14.04 to try to fix some other issues. Now, something has gone wrong with my graphics. I have a Thinkpad T530 with Intel and Nvidia graphics cards. $ inxi -SGx System: Host: xyz Kernel: 3.13.0-24-generic x86_64 (64 bit, gcc: 4.8.2) Desktop: N/A Distro: Ubuntu 14.04 trusty Graphics: Card-1: Intel 3rd Gen Core processor Graphics Controller bus-ID: 00:02.0 Card-2: NVIDIA GF108M [NVS 5400M] bus-ID: 01:00.0 X.Org: 1.15.1 drivers: fbdev,vesa,intel,nouveau (unloaded: nvidia) Resolution: [email protected] GLX Renderer: N/A GLX Version: N/A Direct Rendering: N/A $ glxinfo name of display: :0 Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Error: couldn't find RGB GLX visual or fbconfig Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Error: couldn't find RGB GLX visual or fbconfig Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". I'm not sure what I did but now something is wrong with my graphics, as should be visible from the above commands. nvidia-detector says "none" as well. I used to have bumblebee but then some website said to remove it and now something's clearly wrong. What's the right way to set things up? Should I try to add bumblebee back? Here's what's installed now: $ dpkg --get-selections | grep nvidia nvidia-319 install nvidia-331 install nvidia-libopencl1-331 install nvidia-opencl-icd-331 install nvidia-prime install nvidia-settings install nvidia-settings-319 install

  Read the article

• How to SEO Optimize Javascript Image Loader?

  - by skibulk

  I am building an image-centric catalog website. It catalogs collectible gaming cards numbering 100,000+ pages. Competitor sites recieve millions of hits each month, so with the possibility of excessive traffic, I need to moderate image bandwidth while also optimizing for image SEO. I'm looking for some tips on doing so. Each page on the site features one card with appropriate tags and descriptions. There are however four images for each card - one on matte cardstock, one on foil cardstock, one digital, and one digital foil. In a world with unlimited bandwidth and no-wait page loads, I'd simply embed all four images on the main product page with titles, alt tags, and captions to rank them according to their version keyword. In reality a javascript gallery image loader seems appropriate. Here is a simplified example of my current code. Would this affect SEO in any way? Should I be doing anything differently? Note that I don't want to create a page for each image as I'd have to duplicate the card tags and descriptions on each one, diluting PR for the main page. Thanks for any insight! <script type="text/javascript"> document.write(' <img src="thumbnail1.jpg" data-src="version1.jpg"> <img src="thumbnail2.jpg" data-src="version2.jpg"> <img src="thumbnail3.jpg" data-src="version3.jpg"> <img src="thumbnail4.jpg" data-src="version4.jpg"> '); </script> <noscript> <img src="version1.jpg"> <img src="version2.jpg"> <img src="version3.jpg"> <img src="version4.jpg"> </noscript>

  Read the article

• Added resolution not working after upgrading to 12.04

  - by David

  After upgrading, my screen resolution (added by xrandr comands on the start) did not work like before. Messages appear showing some errors (that i have never had in 11.10). "No se pudo aplicar la configuración almacenada para los monitores"/"Can't apply the stored configuration for the monitors." This script didn't work either. xrandr --newmode "1280x1024_60.00" 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync xrandr --addmode VGA1 1280x1024_60.00 xrandr --output VGA1 --mode 1280x1024_60.00 I also tryed deleting monitors.xml but, nothing. This only erase the window message. It's been sayd that ##It's a normal buggy and well know problem for Pc's with Intel integrated video cards.## The new version of gnome-settings-daemon stores its configuration information in dconf rather than gconf. I tryed something, but the problem persist. This is what i did. Install the dconf-tools package, and then run dconf-editor. In the tree on the left, navigate org - gnome - settings-daemon - plugins - xrandr. Uncheck the active checkbox. restart your XServer (Ctrl+Alt+Backspace) (It didn't worked out for me, but it may be helpful to someone)

  Read the article

• Disable discrete AMD GPU

  - by Smajl

  My notebook has two graphic cards and it suffers from severe overheating after installing Ubuntu (no problem with Windows 7 on the same machine). I figured out that the problem may be in the graphic card and I would like to disable the discrete one. I followed some tutorials on this topic (for example http://planetoss.com/articles/how-to-disable-the-discrete-amd-graphics-card-in-linux/). But the problem is, that after executing the commands, nothing really happens and both GPU are still running. Here is what I have done: smajl@smajl-mini:~$ sudo chown smajl /sys/kernel/debug/vgaswitcheroo/switchsmajl@smajl-mini:~$ echo IGD > /sys/kernel/debug/vgaswitcheroo/switch smajl@smajl-mini:~$ sudo cat /sys/kernel/debug/vgaswitcheroo/switch 0:IGD:+:DynPwr:0000:01:05.0 1:DIS-Audio: :Pwr:0000:02:00.1 2:DIS: :DynPwr:0000:02:00.0 smajl@smajl-mini:~$ echo OFF > /sys/kernel/debug/vgaswitcheroo/switch smajl@smajl-mini:~$ sudo cat /sys/kernel/debug/vgaswitcheroo/switch 0:IGD:+:DynPwr:0000:01:05.0 1:DIS-Audio: :Pwr:0000:02:00.1 2:DIS: :DynPwr:0000:02:00.0 What am I missing here? Also, more on the overheating topic: 1) Installed TLP 2) updated system 3) set power setting mode to "power save" ...and nothing helps Tried same thing with Linux Mint without success. Is there anything else to try if I manage to disable the second GPU and the problem preserves? Otherwise I would have to get back to win in order not to melt my laptop.. :-/

  Read the article

• Use two networks at the same time?

  - by Christopher

  I want to use Ubuntu 10.10 Server in a classroom, a computer lab whose bandwidth is provided by a local cable ISP. That's no problem, though the school network has an IP printer that I want to use. I cannot reach the printer through the cable Internet. But, I have two network cards. How is it possible to use both networks at once? eth0 (static 192.168.1.254) is plugged into a four-port router, 192.168.1.1. On the public side of the four-port router is Internet provided by the cable company. I also have the classroom workstations plugged into a switch. The switch is plugged into the four-port router. The whole classroom is wired into the cable Internet. The other NIC, eth1, could it be plugged into an Ethernet jack in the wall? It uses the school network, and I might receive by DHCP an IP address like 10.140.10.100, with the printer on maybe 10.120.50.10. I was thinking about installing the printer on the server so that it could be shared with the workstations. But how does this work? Can I just plug eth1 into the school network and access both LANs? Thanks for any insight

  Read the article

• Never Bet Against the Impossible

  - by BuckWoody

  My uncle used to say “If a man tells you that his car squirts milk in his eye when you lift the hood, don’t bet against that. You’ll end up with milk in your eye.” My friend Allen White tells me this is taken from a play (and was said about playing cards), but I think the sentiment holds, even in database work. I mentioned the other day that you should allow the other person to talk and actively listen before you propose a solution. Well, I saw a consultant “bet against the impossible”  the other day – and it bit her. She explained to the person telling her the problem that the situation simply couldn’t exist that way, and he proceeded to show her that it did. She got silent, typed a few things, muttered a little, and then said “well, must be something else.” She just couldn’t admit she was wrong. So don’t go there. If someone explains a problem to you with their database, listen with purpose, and then explore the troubleshooting steps you know to find the problem. But keep your absolutes to yourself. In fact, I have a friend that has recently sent me one of those. He connects to a system with SQL Server Management Studio (SSMS) version 2008 (if I recall correctly) and it shows a certain version number of the target system in the connection tab. Then he connects to it using SSMS 2008 R2 and gets a different number. Now, as far as I know, we didn’t change the connection string information, and that’s provided by the target system, so this is impossible. But I won’t tell him that. Not until I look a little more. :) Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Effect of using dedicated NVidia card instead of Intel HD4000

  - by Sman789

  Short version: Can someone please advise me of the effect of adding a dedicated NVIDIA GeForce GT 630M card to an Ubuntu laptop in terms of power consumption and performance gains/losses when doing general productivity tasks and booting up. Also, how good are the closed source, open source, and Bumblebee drivers for these newer cards compared to support for the Intel HD4000? Long version/Background, if any info here is helpful: I'm thinking of ordering a laptop from PC Specialist (a UK company who actually sell machines without Windows pre-installed) with the following specifications: Genesis IV: 15.6" AUO Matte 95% Gamut LED Widescreen (1920x1080) Intel® Core™i5 Dual Core Mobile Processor i5-3210M (2.50GHz) 3MB 4GB SAMSUNG 1600MHz SODIMM DDR3 MEMORY (1 x 4GB) 120GB INTEL® 520 SERIES SSD, SATA 6 Gb/s (upto 550MB/sR | 520MB/sW) Intel 2 Channel High Definition Audio + MIC/Headphone Jack GIGABIT LAN & WIRELESS INTEL® N135 802.11N (150Mbps) + BLUETOOTH Now, as I want this laptop mainly for work and not for games, I would be more than content with the HD4000 integrated chip which comes with the processor. However, for compatibility reasons, I am not able to get the specs I want unless I choose a NVIDIA GeForce GT 630M 1GB graphics card, which I don't have a great deal of use for. I'm willing to buy it, however, as it's still cheaper than any other laptop with the specs I want. However, I know that Linux power management isn't fantastic with open-source graphics drivers, and I don't much about Bumblebee. Basically, whilst I'm happy to 'tolerate' the card being there, I don't want to experience any negative effects on the rest of my system (battery, performance etc) and if there are likely to be any, I might reconsider my purchase. So if anyone can advise me on the effects, I would be very grateful, since I doubt I can just turn the card off. Thankyou for any assistance :)

  Read the article

• Wrong resolution for Lightdm/GDM on Ubuntu 13.04 using HDMI

  - by f03lipe

  I've tried all the solution I could find on the matter so far, but the error persists. My problem is that the login screen (both under gdm and lightdm) runs with the wrong resolution, even though all is fine when I log in. The error occurs solely when I have my HDMI cable connected to my other screen. The login screen resolution becomes 1024x768 (for my 1366x768 laptop screen) and mirrored on my screen, which is 1920x1080. I've had this issue on version 12.04 (the last one before I upgraded to 13.04), but I got it fixed by adding the xrandr commands on the begining of the /etc/gdm/Init/Default file. This doesn't seem to work anymore. I've also tried telling lightdm to run a script fixing the resolution with xrandr (by editing /etc/lightdm/lightdm.conf), but lightdm crashes, and I'm forced to log in with low graphic settigs. Hint: when ubuntu is loading, the resolution starts OK, then goes bad right before the login screen is initialized. Does that mean that there's nothing wrong with my graphic cards? What do you think? Cheers!

  Read the article

• How to debug lack of sound in Asus EEE PC

  - by Kalmar

  I have an Asus EEE PC 1225B with fresh Lubuntu 12.04. And no sound. It doesn't seem to be some common problem, so I have to make some research what's up. I tried running alsamixer, so I know I have Realtek ALC269VB with nothing muted unexpectedly. What can I do next to identify and solve the problem? Additional info: alsamixer shows two cards: HD-Audio Generic and HDA ATI-SB (Realtek ALC269VB); the first one is muted. ~$ aplay ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave aplay: main:682: blad otwierania audio: Nie ma takiego pliku ani katalogu The Polish part can be translated as "error opening audio: There is no such file or directory". ~$ sudo lspci -v | grep -A7 -i "audio" 00:01.1 Audio device: Advanced Micro Devices [AMD] nee ATI Wrestler HDMI Audio [Radeon HD 6250/6310] Subsystem: ASUSTeK Computer Inc. Device 103b Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at feb44000 (32-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 3 Capabilities: [58] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> -- 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) (rev 40) Subsystem: ASUSTeK Computer Inc. Device 103b Flags: bus master, slow devsel, latency 32, IRQ 16 Memory at feb40000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel

  Read the article

• Ubuntu sound volume is 40% lower than in Windows

  - by ncomx

  I have 2x 2.1 speakers connected to the computer where I have Ubuntu 12.04 installed. On the software side I've set all the volume controls to 100% with the alsamixer program. The speakers have their own volume control, maintaining those at the same level, and switching between Ubuntu and Windows (XP and 7), on windows the output volume is at least 40% higher, even when having the windows volume control at 50% (without touching the speakers volume control) it's still much higher than the sound on Ubuntu. Why can this be happening? Are there some alternative sound drivers (other than the default ones) I could test to see if it makes a difference? some info about the card: root:$ cat /proc/asound/cards 0 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xfbff4000 irq 55 1 [Generic ]: HDA-Intel - HD-Audio Generic HD-Audio Generic at 0xfbcfc000 irq 56 root:$ lspci | grep -i audio 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 02:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Cayman/Antilles HDMI Audio [Radeon HD 6900 Series] I think the one i am using is the Intel one, the other seems to be from the vga card which is an ati radeon 6950. Running gstreamer-properties and switching between alsa, oss, ossv4 and pulseaudio doesn't seem to make any difference.

  Read the article

• Why does Unity not extend to my 2nd monitor, even when it is displaying an X-Screen?

  - by Gridwalker

  I recently added a 2nd video card to my system, but unity refuses to extend my desktop over to the second screen. Although the secondary monitor initialises when I boot and I can move the mouse cursor over to the 2nd screen, the screen is otherwise blank (showing no wallpaper or interface elements) and I am unable to move any windows to this monitor. Moving the mouse cursor over to the 2nd monitor changes it from the default cursor to the old-style X cursor, such as the one that appears when you run X-kill, indicating that this screen is initialised in the X Server but that Unity is not recognising it. Although the Nvidia X Server Settings application can see both monitors, the unity systems settings application does not detect the 2nd adapter. Sometimes the additional drivers application can see both adapters, but it doesn't consistently show options for them both. Xrandr also fails to detect the 2nd monitor, but iNex lists both adapters. I have experimented with several different drivers for each adapter and with setting each of the graphics cards as the primary adapter in the BIOS, but this has made little difference. The two adapters are an onboard Geforce 8200 and a PCIE Geforce 7200 GX. The onboard adapter is currently set as the primary, however this adapter crashes whenever I use the Nouveau driver and I have to switch over to the PCIE as a primary whenever I purge the proprietary drivers (switching back when the 304 driver has been reinstalled). It doesn't matter which adapter I set as my primary, the results are the same : one screen showing the unity interface and one screen showing an X-Screen that only displays the mouse cursor. All I want is to be able to run this system in a dual screen configuration. I am not a gamer, nor do I require 3D rendering capabilities. Anything you can suggest to get the desktop to extend across both screens will be massively appreciated!

  Read the article

• 3D physics engine for accurate collision handling on desktop/laptop computers (non-console)

  - by Georges Oates Larsen

  What are your suggestions for a physics engine that satisfies the following criteria? Capable of calculating collisions between multiple concave mesh-based colliders Handles many collisions going on at once (for instance one mesh being wedged between two others, which themselves may be wedged between two meshes) Does not allow for collider passthrough, even at high speeds. For instance, if I am applying force to a programmatically hinged object that makes it spin, I do not want it to pass through another rigidbody that it collides with while spinning. I have this problem using PhysX As implied before, reacts well to hinged objects, preferably has its own implementation of a hinge, but I am willing to program my own. The important part is that it has some sort of interface that guarantees accurate collision tracking even when dealing with these things Platform independent -- runs on mac as well as PC, also not tied down to specific graphics cards I think that's the best way to explain what I am looking for. Basically, I need SUPER reliable collisions. Something that can't be accomplished with a simple ray casting approach that sends a ray from the last position of the object to the current position (as this object may be potentially large and colliding with small objects via rotation) Bonus points for also including an OPEN SOURCE engine.

  Read the article

• Is it possible to get xRandR to see two separate outputs with the nvidia driver?

  - by rumtscho

  I have two monitors, which I have set up with nvidia-settings in Twinview. The result: When I want to do something in xRandR, it does not function. It doesn't report one output per video card head, but a single output mapped to the combined area of both monitors: rumtscho@bradbury:~$ xrandr xrandr: Failed to get size of gamma for output default Screen 0: minimum 3840 x 1440, current 3840 x 1440, maximum 3840 x 1440 default connected 3840x1440+0+0 0mm x 0mm 3840x1440 50.0* Now I promised somebody to help test a driver. The developer is using an open source driver for Intel video cards, and his driver assumes that there is more than one xRandR output, each mapped to a monitor. So I tried rewriting my xorg.conf to somehow get two outputs to show up, but failed. Googling showed that people faced with the xRandR-nvidia problem either stopped using xRandR and achieved what they needed with nvidia-settings, or changed their driver to nouveau. The first is not going to help in my situation, and I am not willing to give up the proprietary driver, because Compiz won't work without it. So does anybody know a way to get nvidia to actually pass on information on outputs to xRandR?

  Read the article

• Questions before I revamp my rendering engine to use shaders (GLSL)

  - by stephelton

  I've written a fairly robust rendering engine using OpenGL ES 1.1 (fixed-function.) I've been looking into revamping the engine to use OpenGL ES 2.0, which necessitates that I use shaders. I've been absorbing information all day long and still have some questions. Firstly, lighting. The fixed-function pipeline is guaranteed to have at least 8 lights available. My current engine finds lights that are "close" to the primitives being drawn and enables them; I don't know how many lights are going to be enabled until I draw a given model. Nothing is dynamically allocated in GLSL, so I have to define in a shader some number of lights to be used, right? So if I want to stick with 8, should I write my general purpose shader to have 8 lights and then use uniforms to tell it how many / which lights to use? Which brings me to another question: should I be concerned with the amount of data I'm allocating in a shader? Recent video cards have hundreds of "stream processors." If I've got a fragment shader being used on some number of fragments in a given triangle, I assume they must each have their own stack to work on. Are read-only variables copied here, or read when needed? My initial goal is to rework my code so that it is virtually identical to the current implementation. What I have in mind is to create my own matrix stack so that I can implement something along the lines of push/popMatrix and apply all my translations, rotations, and scales to this matrix, then provide the matrix to the vertex shader so that it can make very quick vertex translations. Is this approach sound? Edit: My original intention was to ask if there was a tutorial that would explain the bare minimum necessary to jump from fixed-function to using shaders. Thanks!

  Read the article

• 12.10 no audio via hdmi and video speeds up

  - by jackson

  I have a laptop with an ati radeon 4200, on 12.04 everything worked fine, since upgrading to 12.10 I cannot get sound over the hdmi. When I switch to hdmi audio the video speeds up to about 2x. I can use the speakers in my laptop and watch video via hdmi with no problems. Things I have tried: Various tutorials to install the AMD/ATI drivers, all of which resulted in low graphics mode. Checked that everything is properly set in alsamixer, the sound utility and - installed pavucontrol and checked everything in there. Verified the output from cat /proc/asound/cards looks normal When I initially upgraded there was a plethora of problems which I believe were due to the old proprietary driver still being used but not compatible, after a few hours trying to fix that I decided just to back up and do a fresh install which works great except for the above stated problem. Any help would be greatly appreciated!! Finally hopefully this hasn't already been answered, I have tried a few different searches on the boards and haven't come up with anything. $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: SB [HDA ATI SB], device 0: ALC269VB Analog [ALC269VB Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0] Subdevices: 0/1 Subdevice #0: subdevice #0

  Read the article

• OpenJDK In The News: AMD and Oracle to Collaborate in the OpenJDK Community [..]

  - by $utils.escapeXML($entry.author)

  During the JavaOne™ 2012 Strategy Keynote, AMD (NYSE: AMD) announced its participation in OpenJDK™ Project “Sumatra” in collaboration with Oracle and other members of the OpenJDK community to help bring heterogeneous computing capabilities to Java™ for server and cloud environments. The OpenJDK Project “Sumatra” will explore how the Java Virtual Machine (JVM), as well as the Java language and APIs, might be enhanced to allow applications to take advantage of graphics processing unit (GPU) acceleration, either in discrete graphics cards or in high-performance graphics processor cores such as those found in AMD accelerated processing units (APUs).“Affirming our plans to contribute to the OpenJDK Project represents the next step towards bringing heterogeneous computing to millions of Java developers and can potentially lead to future developments of new hardware models, as well as server and cloud programming paradigms,” said Manju Hegde, corporate vice president, Heterogeneous Applications and Developer Solutions at AMD. “AMD has an established track record of collaboration with open-software development communities from OpenCL™ to the Heterogeneous System Architecture (HSA) Foundation, and with this initiative we will help further the development of graphics acceleration within the Java community.”“We expect our work with AMD and other OpenJDK participants in Project “Sumatra” will eventually help provide Java developers with the ability to quickly leverage GPU acceleration for better performance,” said Georges Saab, vice president, Software Development, Java Platform Group at Oracle. "We hope individuals and other organizations interested in this exciting development will follow AMD's lead by joining us in Project “Sumatra."Quotes taken from the first press release from AMD mentioning OpenJDK, titled "AMD and Oracle to Collaborate in the OpenJDK Community to Explore Heterogeneous Computing for Java ".

  Read the article

< Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >