Search Results

Search found 1163 results on 47 pages for 'forever'.

Page 42/47 | < Previous Page | 38 39 40 41 42 43 44 45 46 47  | Next Page >

• Dealing with "I-am-cool-and-you-are-dumb" manager [closed]

  - by Software Guy

  I have been working with a software company for about 6 months now. I like the projects I work on there and I really like all the people there except for 1 guy. That guy is technically smart, and he is a co-founder of the company. He is an okay guy in person (the kind you wouldn't want to care about much) but things get tricky when he is your manager. In general I am all okay but there are times when I feel I am not being treated fairly: He doesn't give much thought to when he makes mistakes and when I do something similar, he is super critical. Recently he went as far as to say "I am not sure if I can trust you with this feature". The detais of this specific case are this: I was working on this feature, and I was already a couple of hours over my normal working hours, and then I decided to stop and continue tomorrow. We use git, and I like to commit changes locally and only push when I feel they are ready. This manager insists that I push all the changes to the central repo (in case my hard drive crashes). So I push the change, and the ticket is marked as "to be tested". Next day I come in, he sits next to me and starts complaining and says that I posted above. I really didn't know what to say, I tried to explain to him that the ticket is still being worked upon but he didn't seem to listen. He interrupts me in-between when I am coding, which I do not mind, but when I do that same, his face turns like this :| and reacts as if his work was super important and I am just wasting his time. He asks me to accumulate all questions, and then ask him altogether which is not always possible, as you need a clarification before you can continue on a feature implementation. And when I am coding, he talks on the phone with his customers next to me (when he can go to the meeting room with his laptop) and doesn't care. He made me switch to a whole new IDE (from Netbeans to a commercial IDE costing a lot of money) for a really tiny feature (which I later found out was in Netbeans as well!). I didn't make a big deal out of it as I am equally comfortable working with this new IDE, but I couldn't get the science behind his obsession. He said this feature makes sure that if any method is updated by a programmer, the IDE will turn the method name to red in places where it is used. I told him that I do not have a problem since I always search for method usage in the project and make sure its updated. IDEs even have refactoring features for exactly that, but... I recently implemented a feature for a project, and I was happy about it and considering him a senior, I asked him his comments about the implementation quality.. he thought long and hard, made a few funny faces, and when he couldn't find anything, he said "ummm, your program will crash if JS is disabled" - he was wrong, since I had made sure it would work fine with default values even if JS was disabled. I told him that and then he said "oh okay". BUT, the funny thing is, a few days back, he implemented something and I objected with "But that would not run if JS is disabled" and his response was "We don't have to care about people who disable JS" :-/ Once he asked me to investigate if there was a way to modify a CMS generated menu programmatically by extending the CMS, I did my research and told him that the only was is to inject a menu item using JavaScript / jQuery and his reaction was "ah that's ugly, and hacky, not acceptable" and two days later, I see that feature implemented in the same way as I had suggested. The point is, his reaction was not respectful at all, even if what I proposed was hacky, he should be respectful, that I know what's hacky and if I am suggesting something hacky, there must be a reason for it. There are plenty of other reasons / examples where I feel I am not being treated fairly. I want your advice as to what is it that I am doing wrong and how to deal with such a situation. The other guys in the team are actually very good people, and I do not want to leave the job either (although I could, if I want to). All I want is respect and equal treatment. I have thought about talking to this guy in a face to face meeting, but that worries me that his attitude might get worse and make things more difficult for me (since he doesn't seem to be the guy who thinks he can be wrong too). I am also considering talking to the other co-founder but I am not sure how he will take it (as both founders have been friends forever). Thanks for reading the long message, I really appreciate your help.

  Read the article

• Applications: The Mathematics of Movement, Part 3

  - by TechTwaddle

  Previously: Part 1, Part 2 As promised in the previous post, this post will cover two variations of the marble move program. The first one, Infinite Move, keeps the marble moving towards the click point, rebounding it off the screen edges and changing its direction when the user clicks again. The second version, Finite Move, is the same as first except that the marble does not move forever. It moves towards the click point, rebounds off the screen edges and slowly comes to rest. The amount of time that it moves depends on the distance between the click point and marble. Infinite Move This case is simple (actually both cases are simple). In this case all we need is the direction information which is exactly what the unit vector stores. So when the user clicks, you calculate the unit vector towards the click point and then keep updating the marbles position like crazy. And, of course, there is no stop condition. There’s a little more additional code in the bounds checking conditions. Whenever the marble goes off the screen boundaries, we need to reverse its direction.  Here is the code for mouse up event and UpdatePosition() method, //stores the unit vector double unitX = 0, unitY = 0; double speed = 6; //speed times the unit vector double incrX = 0, incrY = 0; private void Form1_MouseUp(object sender, MouseEventArgs e) {     double x = e.X - marble1.x;     double y = e.Y - marble1.y;     //calculate distance between click point and current marble position     double lenSqrd = x * x + y * y;     double len = Math.Sqrt(lenSqrd);     //unit vector along the same direction (from marble towards click point)     unitX = x / len;     unitY = y / len;     timer1.Enabled = true; } private void UpdatePosition() {     //amount by which to increment marble position     incrX = speed * unitX;     incrY = speed * unitY;     marble1.x += incrX;     marble1.y += incrY;     //check for bounds     if ((int)marble1.x < MinX + marbleWidth / 2)     {         marble1.x = MinX + marbleWidth / 2;         unitX *= -1;     }     else if ((int)marble1.x > (MaxX - marbleWidth / 2))     {         marble1.x = MaxX - marbleWidth / 2;         unitX *= -1;     }     if ((int)marble1.y < MinY + marbleHeight / 2)     {         marble1.y = MinY + marbleHeight / 2;         unitY *= -1;     }     else if ((int)marble1.y > (MaxY - marbleHeight / 2))     {         marble1.y = MaxY - marbleHeight / 2;         unitY *= -1;     } } So whenever the user clicks we calculate the unit vector along that direction and also the amount by which the marble position needs to be incremented. The speed in this case is fixed at 6. You can experiment with different values. And under bounds checking, whenever the marble position goes out of bounds along the x or y direction we reverse the direction of the unit vector along that direction. Here’s a video of it running;   Finite Move The code for finite move is almost exactly same as that of Infinite Move, except for the difference that the speed is not fixed and there is an end condition, so the marble comes to rest after a while. Code follows, //unit vector along the direction of click point double unitX = 0, unitY = 0; //speed of the marble double speed = 0; private void Form1_MouseUp(object sender, MouseEventArgs e) {     double x = 0, y = 0;     double lengthSqrd = 0, length = 0;     x = e.X - marble1.x;     y = e.Y - marble1.y;     lengthSqrd = x * x + y * y;     //length in pixels (between click point and current marble pos)     length = Math.Sqrt(lengthSqrd);     //unit vector along the same direction as vector(x, y)     unitX = x / length;     unitY = y / length;     speed = length / 12;     timer1.Enabled = true; } private void UpdatePosition() {     marble1.x += speed * unitX;     marble1.y += speed * unitY;     //check for bounds     if ((int)marble1.x < MinX + marbleWidth / 2)     {         marble1.x = MinX + marbleWidth / 2;         unitX *= -1;     }     else if ((int)marble1.x > (MaxX - marbleWidth / 2))     {         marble1.x = MaxX - marbleWidth / 2;         unitX *= -1;     }     if ((int)marble1.y < MinY + marbleHeight / 2)     {         marble1.y = MinY + marbleHeight / 2;         unitY *= -1;     }     else if ((int)marble1.y > (MaxY - marbleHeight / 2))     {         marble1.y = MaxY - marbleHeight / 2;         unitY *= -1;     }     //reduce speed by 3% in every loop     speed = speed * 0.97f;     if ((int)speed <= 0)     {         timer1.Enabled = false;     } } So the only difference is that the speed is calculated as a function of length when the mouse up event occurs. Again, this can be experimented with. Bounds checking is same as before. In the update and draw cycle, we reduce the speed by 3% in every cycle. Since speed is calculated as a function of length, speed = length/12, the amount of time it takes speed to reach zero is directly proportional to length. Note that the speed is in ‘pixels per 40ms’ because the timeout value of the timer is 40ms.  The readability can be improved by representing speed in ‘pixels per second’. This would require you to add some more calculations to the code, which I leave out as an exercise. Here’s a video of this second version,

  Read the article

• Understanding the 'High Performance' meaning in Extreme Transaction Processing

  - by kyap

  Despite my previous blogs entries on SOA/BPM and Identity Management, the domain where I'm the most passionated is definitely the Extreme Transaction Processing, commonly called XTP.I came across XTP back to 2007 while I was still FMW Product Manager in EMEA. At that time Oracle acquired a company called Tangosol, which owned an unique product called Coherence that we renamed to Oracle Coherence. Beside this innovative renaming of the product, to be honest, I didn't know much about it, except being a "distributed in-memory cache for Extreme Transaction Processing"... not very helpful still.In general when people doesn't fully understand a technology or a concept, they tend to find some shortcuts, either correct or not, to justify their lack-of understanding... and of course I was part of this category of individuals. And the shortcut was "Oracle Coherence Cache helps to improve Performance". Excellent marketing slogan... but not very meaningful still. By chance I was able to get away quickly from that group in July 2007* at Thames Valley Park (UK), after I attended one of the most interesting workshops, in my 10 years career in Oracle, delivered by Brian Oliver. The biggest mistake I made was to assume that performance improvement with Coherence was related to the response time. Which can be considered as legitimus at that time, because after-all caches help to reduce latency on cached data access, hence reduce the response-time. But like all caches, you need to define caching and expiration policies, thinking about the cache-missed strategy, and most of the time you have to re-write partially your application in order to work with the cache. At a result, the expected benefit vanishes... so, not very useful then?The key mistake I made was my perception or obsession on how performance improvement should be driven, but I strongly believe this is still a common problem to most of the developers. In fact we all know the that the performance of a system is generally presented by the Capacity (or Throughput), with the 2 important dimensions Speed (response-time) and Volume (load) :Capacity (TPS) = Volume (T) / Speed (S)To increase the Capacity, we can either reduce the Speed(in terms of response-time), or to increase the Volume. However we tend to only focus on reducing the Speed dimension, perhaps it is more concrete and tangible to measure, and nicer to present to our management because there's a direct impact onto the end-users experience. On the other hand, we assume the Volume can be addressed by the underlying hardware or software stack, so if we need more capacity (scale out), we just add more hardware or software. Unfortunately, the reality proves that IT is never as ideal as we assume...The challenge with Speed improvement approach is that it is generally difficult and costly to make things already fast... faster. And by adding Coherence will not necessarily help either. Even though we manage to do so, the Capacity can not increase forever because... the Speed can be influenced by the Volume. For all system, we always have a performance illustration as follow: In all traditional system, the increase of Volume (Transaction) will also increase the Speed (Response-Time) as some point. The reason is simple: most of the time the Application logics were not designed to scale. As an example, if you have a while-loop in your application, it is natural to conceive that parsing 200 entries will require double execution-time compared to 100 entries. If you need to "Speed-up" the execution, you can only upgrade your hardware (scale-up) with faster CPU and/or network to reduce network latency. It is technically limited and economically inefficient. And this is exactly where XTP and Coherence kick in. The primary objective of XTP is about designing applications which can scale-out for increasing the Volume, by applying coding techniques to keep the execution-time as constant as possible, independently of the number of runtime data being manipulated. It is actually not just about having an application running as fast as possible, but about having a much more predictable system, with constant response-time and linearly scale, so we can easily increase throughput by adding more hardwares in parallel. It is in general combined with the Low Latency Programming model, where we tried to optimize the network usage as much as possible, either from the programmatic angle (less network-hoops to complete a task), and/or from a hardware angle (faster network equipments). In this picture, Oracle Coherence can be considered as software-level XTP enabler, via the Distributed-Cache because it can guarantee: - Constant Data Objects access time, independently from the number of Objects and the Coherence Cluster size - Data Objects Distribution by Affinity for in-memory data grouping - In-place Data Processing for parallel executionTo summarize, Oracle Coherence is indeed useful to improve your application performance, just not in the way we commonly think. It's not about the Speed itself, but about the overall Capacity with Extreme Load while keeping consistant Speed. In the future I will keep adding new blog entries around this topic, with some sample codes experiences sharing that I capture in the last few years. In the meanwhile if you want to know more how Oracle Coherence, I strongly suggest you to start with checking how our worldwide customers are using Oracle Coherence first, then you can start playing with the product through our tutorial.Have Fun !

  Read the article

• UK OUG Conference Highlights and Insights

  - by Richard Bingham

  As per my preemptive post, this was the first time the annual conference organized by the UK Oracle User Group (UKOUG) was split into two events, one for Oracle Applications and another in December for Oracle Technology. Apps13, as it was branded, was hailed as a success, with over 1000 registered attendees and three days of sessions, exhibition, round-tables and many other types of content. As this poster on their stand illustrates, the UKOUG is a strong community with popular participants from both big and small Oracle partners and customers. The venue was a more intimate setting than previous years also, allowing everyone to casually bump into those they hoped to. It gave a real feeling of an Apps Community. The main themes over the days where CRM and Customer Experience, HCM, and FIN/SCM. This allowed people to attend just one focused day if they wanted. In addition the Apps Transformation stream ran across all three days, offering insights, advice, and details on the newer product solutions like Fusion Applications.  Here are some of the key take-aways I got from the conference, specific to my role in Fusion Applications Developer Relations: User Experience continues to be a significant reason for adopting some of the newer application products available, with immediately obvious gains in user productivity and satisfaction reported by customers. Also this doesn't stop with the baked-in UX either, with their Design Patterns proving popular and indeed currently being extended to including things like extending on ADF mobile and customizing the Simplified UI. More on this to come from us soon. The executive sessions emphasized the "it's a journey" phrase, illustrating that modern business applications are powered by technologies such as Cloud, Mobile, Social and Big Data and these can be harnessed to help propel your organization forward. Indeed the emphasis is away from the traditional vendor prescribed linear applications road map, and towards plotting a course based on business priorities supported by a broad range of integrated solutions. To help with this several conference sessions demoed the new "Applications Navigator" tool, developed in partnership with OUG members, which offers a visual framework to help organizations plan their Oracle Applications investments around business and technology imperatives. Initial reaction was positive, especially as customers do not need to decipher Oracle's huge product catalog and embeds the best blend of proven and integrated applications solutions. We'll share more on this when it is generally available. Several sessions focused around explanations and interpretation of Oracle OpenWorld 2013, helping highlight the key Oracle Applications messages and directions. With a relative small percentage of conference attendees also at OpenWorld (from a show of hands) this was a popular way to distill the information available down into specific items of interest for the community. Please note the original OpenWorld 2013 content is still available for download but will not remain available forever (via the Oracle website OpenWorld Content Catalog > pick a session > see the PDF download). With the release of E-Business Suite 12.2 the move to develop and deploy on the Fusion Middleware stack becomes a reality for many Oracle Applications customers. This coupled with recent E-Business Suite features such as the Integrated SOA Gateway and the E-Business Suite SDK for Java, illustrates how the gap between the technologies and techniques involved in extending E-Business Suite and Fusion Applications is quickly narrowing. We'll see this merging continue to evolve going forwards. Getting started with Oracle Cloud Applications is actually easier than many customers expected, with a broad selection of both large and medium sized organizations explaining how they added new features to their existing Oracle Applications portfolios. New functionality available from Fusion HCM and CX are popular extensions that do not have to disrupt those core business services. Coexistence is the buzzword here, and the available integration is also simpler than many expected, commonly involving an initial setup data load, then regularly incremental synchronizations, often without a need for real-time constant communication between systems. With much of this pre-built already the implementation process is also quite rapid. With most people dressed in suits, we wanted to get the conversations going without the traditional english reserve, so we decided to make ourselves a bit more obvious, as the photo below shows. This seemed to be quite successful and helped those interested identify and approach us. Keep a look out for similar again. In fact if you're in the UK there is an "Apps Transformation Day" planned by the UKOUG for the 19th March 2014, with more details to follow. Again something we'll be sure to participate in. I am hoping to attend the next half of the UKOUG annual conference, Tech13, that focuses more on Oracle technology and where there is more likely to be larger attendance of those interested in the lower-level aspects of applications customization and development. If you're going, let me know and maybe we can meet up.

  Read the article

• Tip #19 Module Private Visibility in OSGi

  - by ByronNevins

  I hate public and protected methods and classes.  It requires so much work to change them in a huge project like GlassFish.  Not to mention that you may well have to support those APIs forever.  They are highly overused in GlassFish.  In fact I'd bet that > 95% of classes are marked as public for no good reason.  It's just (bad) habit is my guess. private and default visibility (I call it package-private) is easier to maintain.  It is much much easier to change such classes and methods around.  If you have ANY public method or public class in GlassFish you'll need to grep through a tremendous amount of source code to find all callers.  But even that won't be theoretically reliable.  What if a caller is using reflection to access public methods?  You may never find such usages. If you have package private methods, it's easy.  Simply grep through all the code in that one package.  As long as that package compiles ok you're all set.  There can' be any compile errors anywhere else.  It's a waste of time to even look around or build the "outside" world.  So you may be thinking: "Aha!  I'll just make my module have one giant package with all the java files.  Then I can use the default visibility and maintenance will be much easier.  But there's a problem.  You are wasting a very nice feature of java -- organizing code into separate packages.  It also makes the code much more encapsulated.  Unfortunately to share code between the packages you have no choice but to declare public visibility. What happens in practice is that a module ends up having tons of public classes and methods that are used exclusively inside the module.  Which finally brings me to the point of this blog:  If Only There Was A Module-Private Visibility Available Well, surprise!  There is such a mechanism.  If your project is running under OSGi that is.  Like GlassFish does!  With this mechanism you can easily add another level of visibility by telling OSGi exactly which public you want to be exposed outside of the module.  You get the best of both worlds: Better encapsulation of your code so that maintenance is easier and productivity is increased. Usage of public visibility inside the module so that you can encapsulate intra-module better with packages. How I do this in GlassFish: Carefully plan out at least one package that will contain "true" publics.  This is the package that will be exported by OSGi.  I recommend just one package. Here is how to tell OSGi to use it in GlassFish -- edit osgi.bundle like so:-exportcontents:     org.glassfish.mymodule.truepublics;  version=${project.osgi.version} Now all publics declared in any other packages will be visible module-wide but not outside the module. There is one caveat: Accessing "module-private" items outside of the module is controlled at run-time, not compile-time.  The compiler has no clue that a public in a dependent module isn't really public.  it will happily compile it.  At runtime you will definitely see fireworks.  The good news is that you don't have to wait for the code path that tries to use the "module-private" items to fire.  OSGi will complain loudly when that module gets loaded.  OSGi will refuse to load it.  You will see an error like this: remote failure: Error while loading FOO: Exception while adding the new configuration : Error occurred during deployment: Exception while loading the app : org.osgi.framework.BundleException: Unresolved constraint in bundle com.oracle.glassfish.miscreant.code [115]: Unable to resolve 115.0: missing requirement [115.0] osgi.wiring.package; (osgi.wiring.package=org.glassfish.mymodule.unexported). Please see server.log for more details. That is if you accidentally change code in module B to use a public that is really a "module-private" in module A, then you will see the error immediately when you try to test whatever you were changing in module B.

  Read the article

• Usage of IcmpSendEcho2 with an asynchronous callback

  - by Ben Voigt

  I've been reading the MSDN documentation for IcmpSendEcho2 and it raises more questions than it answers. I'm familiar with asynchronous callbacks from other Win32 APIs such as ReadFileEx... I provide a buffer which I guarantee will be reserved for the driver's use until the operation completes with any result other than IO_PENDING, I get my callback in case of either success or failure (and call GetCompletionStatus to find out which). Timeouts are my responsibility and I can call CancelIo to abort processing, but the buffer is still reserved until the driver cancels the operation and calls my completion routine with a status of CANCELLED. And there's an OVERLAPPED structure which uniquely identifies the request through all of this. IcmpSendEcho2 doesn't use an OVERLAPPED context structure for asynchronous requests. And the documentation is unclear excessively minimalist about what happens if the ping times out or fails (failure would be lack of a network connection, a missing ARP entry for local peers, ICMP destination unreachable response from an intervening router for remote peers, etc). Does anyone know whether the callback occurs on timeout and/or failure? And especially, if no response comes, can I reuse the buffer for another call to IcmpSendEcho2 or is it forever reserved in case a reply comes in late? I'm wanting to use this function from a Win32 service, which means I have to get the error-handling cases right and I can't just leak buffers (or if the API does leak buffers, I have to use a helper process so I have a way to abandon requests). There's also an ugly incompatibility in the way the callback is made. It looks like the first parameter is consistent between the two signatures, so I should be able to use the newer PIO_APC_ROUTINE as long as I only use the second parameter if an OS version check returns Vista or newer? Although MSDN says "don't do a Windows version check", it seems like I need to, because the set of versions with the new argument aren't the same as the set of versions where the function exists in iphlpapi.dll. Pointers to additional documentation or working code which uses this function and an APC would be much appreciated. Please also let me know if this is completely the wrong approach -- i.e. if either using raw sockets or some combination of IcmpCreateFile+WriteFileEx+ReadFileEx would be more robust.

  Read the article

• How to assess a job offer with stock options? [closed]

  - by seas

  Cannot help expressing my curiosity about this issue. First of all, Russia, a country, I live in, as far as I understand, is a virgin land on this matter. Motivation is purely developed here and options are not existed at all. So, I am absolutely not aware about this. I roughly understand the mechanism of options. And, as far as I understand, the major white spot in the whole that story, how much will a singe share cost. How much will I get from all those N x 1000 options? I see two ways one can get money from the business: 1. Business goes IPO !!! 2. Business is sold as a whole to another owner. Next way is rather questionable about getting money: 3. Business goes without IPO "forever" (a generation would rather die before it IPO). I am also interested some explanations about situation ?3. Situation ?1 is clear - market decides everything, you either wait for stock price you satisfied or sell everything now. But topic is rather about ?2 - business is sold to another business. I am considering the following model: I am well payed specialist with company X. Somebody, with a company Y makes me an offer. Y is a startup. They cannot offer me much money and cannot overbid my salary, but they grow fast and hope to be bought soon. Instead of money, they offer me N x 1000 options. My problem is "how to assess this offer against my current, stable and well-payed job"? Are there any average cost of virtual share during selling one company to another? Are there any average stock price companies prefer to go to IPO? Are there any barriers against spreading the value of sock before selling the company or IPO (hiring too much people with options package too fast will decrease each package value, I mean)? Are there any good articles with explanations? Is all that somehow written in the law?

  Read the article

• Making mercurial subrepositories behave like subversion externals

  - by Emily Dickinson

  Hi guys, The FAQ, and hginit.com have been really useful for helping me make the transition from svn to hg. However, when it comes to using Hg's subrepository feature in the manner of subversion's externals, I've tried everythign and cannot replicate the nice behavior of svn externals. Here's the simplest example of what I want to do: Init "lib" repository This repository is never to be used as a standalone; it's always included by main repositories, as a sub-repository. Init one or more including repositories To keep the example simple, I'll "init" a repository called "main" Have "main" include "lib" as a subrepository Importantly -- AND HERE'S WHAT I CAN'T GET TO WORK: When I modify a file inside of "main/lib", and I push the modification, then that change gets pushed to the "lib" repository -- NOT to a copy inside of "main". Command lines speak louder than words. I've tried so many variations on this theme, but here's the gist. If someone can reply, in command lines, I'll be forever grateful! 1. Init "lib" repository $ cd /home/moi/hgrepos ## Where I'm storing my hg repositories, on my main server $ hg init lib $ echo "foo" lib/lib.txt $ hg add lib $ hg ci -A -m "Init lib" lib 2. Init "main" repository, and include "lib" as a subrepos $ cd /home/moi/hgrepos $ hg init main $ echo "foo" main/main.txt $ hg add main $ cd main $ hg clone ../lib lib $ echo "lib=lib" .hgsub $ hg ci -A -m "Init main" . This all works fine, but when I make a clone of the "main" repository, and make local modifications to files in "main/lib", and push them, the changes get pushed to "main/lib", NOT to "lib". IN COMMAND-LINE-ESE, THIS IS THE PROBLEM: $ /home/moi/hg-test $ hg clone ssh://[email protected]/hgrepos/lib lib $ hg clone ssh://[email protected]/hgrepos/main main $ cd main $ echo foo lib/lib.txt $ hg st M lib.txt $ hg com -m "Modified lib.txt, from inside the main repos" lib.txt $ hg push pushing to ssh://[email protected]/hgrepos/main/lib That last line of output from hg shows the problem. It shows that I've made a modification to a COPY of a file in lib, NOT to a file in the lib repository. If this were working as I'd like it to work, the push would be to hgrepos/lib, NOT to hgrepos/main/lib. I.e., I would see: $ hg push pushing to ssh://[email protected]/hgrepos/lib IF YOU CAN ANSWER THIS IN TERMS OF COMMAND LINES RATHER THAN IN ENGLISH, I WILL BE ETERNALLY GRATEFUL! Thank you in advance! Emily in Portland

  Read the article

• Asp.Net MVC - Rob Conery's LazyList - Count() or Count

  - by Adam

  I'm trying to create an html table for order logs for customers. A customer is defined as (I've left out a lot of stuff): public class Customer { public LazyList<Order> Orders { get; set; } } The LazyList is set when fetching a Customer: public Customer GetCustomer(int custID) { Customer c = ... c.Orders = new LazyList<Order>(_repository.GetOrders().ByOrderID(custID)); return c; } The order log model: public class OrderLogTableModel { public OrderLogTableModel(LazyList<Order> orders) { Orders = orders; Page = 0; PageSize = 25; } public LazyList<Order> Orders { get; set; } public int Page { get; set; } public int PageSize { get; set; } } and I pass in the customer.Orders after loading a customer. Now the log i'm trying to make, looks something like: <table> <tbody> <% int rowCount = ViewData.Model.Orders.Count(); int innerRows = rowCount - (ViewData.Model.Page * ViewData.Model.PageSize); foreach (Order order in ViewData.Model.Orders.OrderByDescending(x => x.StartDateTime) .Take(innerRows).OrderBy(x => x.StartDateTime) .Take(ViewData.Model.PageSize)) { %> <tr> <td> <%= order.ID %> </td> </tr> <% } %> </tbody> </table> Which works fine. But the problem is evaluating ViewData.Model.Orders.Count() literally takes about 10 minutes. I've tried with the ViewData.Model.Orders.Count property instead, and the results are the same - takes forever. I've also tried calling _repository.GetOrders().ByCustomerID(custID).Count() directly from the view and that executes perfectly within a few ms. Can anybody see any reason why using the LazyList to get a simple count would take so long? It seems like its trying to iterate through the list when getting a simple count.

  Read the article

• What .Net Namespace contains Entity for use in a generic repository?

  - by Sara

  I have a question that I'm ashamed to ask, but I'm going to have a go at it anyway. I am creating a generic repository in asp.net mvc. I came across an example on this website which I find to be exactly what I was looking for, but there is one problem. It references an object - Entity - and I don't know what namespace it is in. I typically create my repositories and use Entity Framework but I decided to use a generic repository because I am using the same code in multiple projects over and over again. Here is the code: public interface IRepository { void Save(ENTITY entity) where ENTITY : Entity; void Delete<ENTITY>(ENTITY entity) where ENTITY : Entity; ENTITY Load<ENTITY>(int id) where ENTITY : Entity; IQueryable<ENTITY> Query<ENTITY>() where ENTITY : Entity; IList<ENTITY> GetAll<ENTITY>() where ENTITY : Entity; IQueryable<ENTITY> Query<ENTITY>(IDomainQuery<ENTITY> whereQuery) where ENTITY : Entity; ENTITY Get<ENTITY>(int id) where ENTITY : Entity; IList<ENTITY> GetObjectsForIds<ENTITY>(string ids) where ENTITY : Entity; void Flush(); } Can someone please tell me what namespace Entity is in? As you can tell, a constraint is placed on the code so that it must be an Entity type. I know that there is an Entity in System.Data.Entity, but that isn't what I need. I have had instances before where I was looking for some namespace that took me forever to find, but I have searched and I'm unable to find the appropriate namespace to cast my generic items correctly. I could cast it as a class and be done with it, but it is bugging me that I can't find Entity anywhere. Can someone help me....please..... :-) Here is a link to the original post. http://stackoverflow.com/questions/1472719/asp-net-mvc-how-many-repositories

  Read the article

• Problem with waveOutWrite and waveOutGetPosition deadlock

  - by MusiGenesis

  I'm working on an app that plays audio continuously using the waveOut... API from winmm.dll. The app uses "leapfrog" buffers, which are basically a bunch of arrays of samples that you dump into the audio queue. Windows plays them seamlessly in sequence, and as each buffer completes Windows calls a callback function. Inside this function, I load the next set of samples into the buffer, process them however, and then dump the buffer back into the audio queue. In this way, the audio plays indefinitely. For animation purposes, I'm trying to incorporate waveOutGetPosition into the application (since the "buffer done" callbacks are irregular enough to cause jerky animation). waveOutGetPosition returns the current position of playback, so it's hyper-precise. The problem is that in my application, making calls to waveOutGetPosition eventually causes the application to lock up - the sound stops and the call never returns. I've boiled things down to a simple app that demonstrates the problem. You can run the app here: http://www.musigenesis.com/SO/waveOut%20demo.exe If you just hear a tiny bit of piano over and over, it's working. It's just meant to demonstrate the problem. The source code for this project is here: http://www.musigenesis.com/SO/WaveOutDemo.zip The first button runs the app in leapfrog mode without making the calls to waveOutGetPosition. If you click this, the app will play forever without breaking (the X button will close it and shut it off). The second button starts the leapfrogger and also starts a forms timer that calls the waveOutGetPosition and displays the current position. Click this and the app will run for a short while and then lock up. On my laptop, it usually locks up in 15-30 seconds; at most it's taken a minute. I have no idea how to fix this, so any help or suggestions would be most welcome. I've found very few posts on this issue, but it seems that there is a potential deadlock, either from multiple calls to waveOutGetPosition or from calls to that and waveOutWrite that occur at the same time. It's possible that I'm calling this too frequently for the system to handle.

  Read the article

• Rx framework: How to wait for an event to be triggered in silverlight test

  - by user324255

  Hi, I have a ViewModel that starts loading the Model async in the constructor, and triggers an event when the Model is loaded. I got a test working with the silverlight unit test framework, like this : bool done = false; [TestMethod] [Asynchronous] public void Test_NoCustomerSelected() { ProjectListViewModel viewModel = null; EnqueueCallback(() => viewModel = new ProjectListViewModel()); EnqueueCallback(() => viewModel.ModelLoaded += new EventHandler<EventArgs>(viewModel_ModelLoaded)); EnqueueConditional(() => done); EnqueueCallback(() => Assert.IsNotNull(viewModel.FilteredProjectList)); EnqueueCallback(() => Assert.AreEqual(4, viewModel.FilteredProjectList.Count)); EnqueueTestComplete(); } void viewModel_ModelLoaded(object sender, EventArgs e) { done = true; } But I'm beginning playing with Rx Framework, and trying to get my test to work, but so far I have no luck. Here's 2 attempts : public void Test_NoCustomerSelected2() { ProjectListViewModel viewModel = null; viewModel = new ProjectListViewModel(eventAggregatorMock.Object, moduleManagerMock.Object); IObservable<IEvent<EventArgs>> eventAsObservable = Observable.FromEvent<EventArgs>( ev => viewModel.ModelLoaded += ev, ev => viewModel.ModelLoaded -= ev); eventAsObservable.Subscribe(args => viewModel_ModelLoaded(args.Sender, args.EventArgs)); eventAsObservable.First(); Assert.IsNotNull(viewModel.Model); Assert.AreEqual(4, viewModel.Model.Count); } [TestMethod] public void Test_NoCustomerSelected3() { ProjectListViewModel viewModel = null; var o = Observable.Start(() => viewModel = new ProjectListViewModel(eventAggregatorMock.Object, moduleManagerMock.Object)); IObservable<IEvent<EventArgs>> eventAsObservable = Observable.FromEvent<EventArgs>( ev => viewModel.ModelLoaded += ev, ev => viewModel.ModelLoaded -= ev); o.TakeUntil(eventAsObservable) .First(); Assert.IsNotNull(viewModel.Model); Assert.AreEqual(4, viewModel.Model.Count); } The first test goes in waiting forever, the second doesn't work because the viewModel is null when it does the FromEvent. Anyone has a clue on how to do this properly?

  Read the article

• Trouble animating RadialGradientBrush in WPF

  - by emddudley

  I'm trying to animate a RadialGradientBrush in my application. I get the super helpful exception: Additional information: 'System.Windows.Style' value cannot be assigned to property 'Style' of object 'System.Windows.Controls.Border'. '[Unknown]' property does not point to a DependencyObject in path '(0).(1).[0].(2)'. Error at object 'System.Windows.Style' in markup file 'Eng.Modules.Core;component/system/grid/systemgridview.xaml' Line 252 Position 51. I know it's something wrong with the indirect property targeting or partial path qualification in my DoubleAnimation's Storyboard.TargetProperty attribute. Any ideas? <Border> <Border.Resources> <RadialGradientBrush x:Key="SomeBrush"> <RadialGradientBrush.GradientStops> <GradientStop Color="White" Offset="0" /> <GradientStop Color="Gold" Offset="1" /> </RadialGradientBrush.GradientStops> </RadialGradientBrush> </Border.Resources> <Border.Style> <Style TargetType="{x:Type Border}"> <Style.Triggers> <DataTrigger Binding="{Binding Path=IsEnabled, RelativeSource={RelativeSource Self}}" Value="True"> <Setter Property="Background" Value="{StaticResource SomeBrush}" /> <DataTrigger.EnterActions> <BeginStoryboard x:Name="SomeStoryBoard"> <Storyboard> <!-- RIGHT HERE --> <DoubleAnimation Storyboard.TargetProperty="(Border.Background).(GradientBrush.GradientStops)[0].(GradientStop.Offset)" From="0" To="1" Duration="0:0:1" RepeatBehavior="Forever" AutoReverse="True" /> </Storyboard> </BeginStoryboard> </DataTrigger.EnterActions> <DataTrigger.ExitActions> <RemoveStoryboard BeginStoryboardName="SomeStoryBoard" /> </DataTrigger.ExitActions> </DataTrigger> </Style.Triggers> </Style> </Border.Style> </Border>

  Read the article

• WPF Choppy Animation

  - by Chris Dunaway

  WPF Windows-XP SP3 I'm having a problem with a simple WPF animation. I use the following Xaml code (in XamlPad and also in a WPF project): <Page xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:sys="clr-namespace:System;assembly=mscorlib" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" > <Border Name="MyBorder" BorderThickness="10" BorderBrush="Blue" CornerRadius="10" Background="DarkRed" > <Rectangle Name="MyRectangle" Margin="10" StrokeDashArray="2.0,1.0" StrokeThickness="10" RadiusX="10" RadiusY="10" Stroke="Black" StrokeDashOffset="0"> <Rectangle.Triggers> <EventTrigger RoutedEvent="Rectangle.Loaded"> <BeginStoryboard> <Storyboard> <DoubleAnimation Storyboard.TargetName="MyRectangle" Storyboard.TargetProperty="StrokeDashOffset" From="0.0" To="3.0" Duration="0:0:1" RepeatBehavior="Forever" Timeline.DesiredFrameRate="30" /> </Storyboard> </BeginStoryboard> </EventTrigger> </Rectangle.Triggers> </Rectangle> </Border> </Page> It has the effect of causing the border to animate around the rectangle. After a fresh reboot of the machine, this animation is nice and smooth. However, I tend to leave my machine on all the time and after a period time elapses (I don't know how long), the animation starts stuttering and becomes choppy. I thought that it may be memory or resource issues, but after shutting down all other apps and any services that seem unnecessary, the stuttering still continues. However, after a system reboot, the animation is smooth again! I get the same symptoms in a WPF app or in XamlPad. In the case of the app, it doesn't seem to make any difference whether I run in the debugger or if I run the executable directly. I applied the patch at this link: http://support.microsoft.com/kb/981741 and I thought that it had taken care of the issue, but it seems not to have. I have seen some posts that might indicate that using transparency might affect animation, but as you can see, my xaml does not use transparency. Can anyone give me some suggestions on how to determine what the problem is? Are there any WPF diagnostic tools that might help? UPDATE: I have checked my video drivers and they are the latest version. (nVidia GeForce 8400 GS)

  Read the article

• HTTP request, strange socket behavoir

  - by hoodoos

  I expirience strange behavior when doing HTTP requests through sockets, here the request: POST https://test.com:443/service/XMLSelect HTTP/1.1 Content-Length: 10926 Host: test.com User-Agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; .NET CLR 1.1.4322; .NET CLR 1.0.3705) Authorization: Basic XXX SOAPAction: http://test.com/SubmitXml Later on there goes body of my request with given content length. After that I recive something like: HTTP/1.1 200 OK Server: Apache-Coyote/1.1 Content-Type: text/xml;charset=utf-8 Transfer-Encoding: chunked Date: Tue, 30 Mar 2010 06:13:52 GMT So everything seem to be fine here. I read all contents from network stream and successfuly recieve response. But my socket which I'm doing polling on switches it's modes like that: write ( i write headers and request here ) read ( after headers sent i begin to recieve response ) write ( STRANGE BEHAVIOUR HERE. WHY? here i send nothing really ) read ( here it switches to read back again ) last two steps can repeat several times. So I want to ask what leads for socket's mode change? And in this case it's not a big problem, but when I use gzip compression in my request ( no idea how it's related ) and ask server to send gzipped response to me like this: POST https://test.com:443/service/XMLSelect HTTP/1.1 Content-Length: 1076 Accept-Encoding: gzip Content-Encoding: gzip Host: test.com User-Agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; .NET CLR 1.1.4322; .NET CLR 1.0.3705) Authorization: Basic XXX SOAPAction: http://test.com/SubmitXml I recieve response like that: HTTP/1.1 200 OK Server: Apache-Coyote/1.1 Content-Encoding: gzip Content-Type: text/xml;charset=utf-8 Transfer-Encoding: chunked Date: Tue, 30 Mar 2010 07:26:33 GMT 2000 ? I recieve a chunk size and GZIP header, it's all okay. And here's what is happening with my poor little socket meanwhile: write ( i write headers and request here ) read ( after headers sent i begin to recieve response ) write ( STRANGE BEHAVIOUR HERE. And it finally sits here forever waiting for me to send something! But if i refer to HTTP I don't have to send anything more! ) What can it be related to? What it wants me to send? Is it remote web server's problem or do I miss something? PS All actual service references and login/passwords replaced with fake ones :)

  Read the article

• active_scaffold routing error

  - by Elizabeth Buckwalter

  If you haven't seen my question yesterday, this is my second rails app. The first went nice and smooth, but this one keeps giving me one random error after another. I installed active_scaffold for this app as well as the last app (the first error, instead of using script/install plugin git://active_scaffold repository, I did script/install plugin http://active_scaffold repository.) I didn't want to spell out basic CRUD on minor models. After the install problems, (before I found the http solution from a windows user when I'm on Linux) I thought I'd try out Hobo. Well, Hobo updated actionmailer, actionpack, activerecord, activeresource, and installed rack. Rails isn't even using the updated versions. But as you can see at the bottom of the trace it's using rack. I have a feeling it has something to do with my futzing around with installing Hobo which I uninstalled. Thanks in advanced. [Edit] I had asked the question over at the ActiveScaffold Group the answer (if you don't want to follow the link) was that this line needed to be added to routes: map.resources :modelName, :active_scaffold => true It doesn't entirely answer my question, since the documentation said nothing about changing routes. But, it works. [/Edit] ActionController::RoutingError in Departments#index Showing vendor/plugins/active_scaffold/frontends/default/views/_list_header.html.erb where line #8 raised: No route matches {:_method=:get, :action="show_search", :controller="departments"} Extracted source (around line #8): 5: <% next if controller.respond_to? link.security_method and !controller.send(link.security_method) -%> 6: <% next if link.action == 'new' && params[:nested].nil? && active_scaffold_config.list.always_show_create %> 7: <% next if link.action == 'show_search' && active_scaffold_config.list.always_show_search %> 8: <%= render_action_link(link, new_params) -%> 9: <% end -%> 10: 11: <%= loading_indicator_tag(:action => :table) %> Trace of template inclusion: vendor/plugins/active_scaffold/frontends/default/views/list.html.erb Full Trace It was taking forever to format it. I'm still not fully conversant in SO's formatting (sometimes the server is down. reboots are reinstalls. it's a play server)

  Read the article

• Git sh.exe process forking issue on windows XP, slow?

  - by AndyL

  Git is essential to my workflow. I run MSYS Git on Windows XP on my quad core machine with 3GB of RAM, and normally it is responsive and zippy. Suddenly an issue has cropped up whereby it takes 30 seconds to run any command from the Git Bash command prompt, including ls or cd. Interestingly, from the bash prompt it looks likes ls runs fairly quickly, I can then see the output from ls, but it then takes ~30 seconds for the prompt to return. If I switch to the windows command prompt (by running cmd from the start menu) git related commands also take forever, even just to run. For example git status can take close to a minute before anything happens. Sometimes the processes simply don't finish. Note that I have "MSYS Git" installed as well as regular "MSYS" for things like MinGW and make. I believe the problem is related to sh.exe located in C:\Program Files\Git\bin. When I run ls from the bash prompt, or when I invoke git from the windows prompt, task manager shows up to four instances of sh.exe processes that come and go. Here I am waiting for ls to return and you can see the task manager has git.exe running and four instances of sh.exe: If I ctrl-c in the middle of an ls I sometimes get errors that include: sh.exe": fork: Resource temporarily unavailable 0 [main] sh.exe" 1624 proc_subproc: Couldn't duplicate my handle<0x6FC> fo r pid 6052, Win32 error 5 sh.exe": fork: Resource temporarily unavailable Or for git status: $ git status sh.exe": fork: Resource temporarily unavailable sh.exe": fork: Resource temporarily unavailable sh.exe": fork: Resource temporarily unavailable sh.exe": fork: Resource temporarily unavailable Can I fix this so that git runs quickly again, and if so how? Things I have tried: Reboot Upgrade MSYS Git to most recent version & Reboot Upgrade MSYS to most recent version & Reboot Uninstall MSYS & uninstall and reinstall MSYS Git alone & Reboot I'd very much like to not wipe my box and reinstall Windows, but I will if I can't get this fixed. I can no longer code if it takes me 30 s to run git status or cd.

  Read the article

• LinearLayout - How to get text to be on the right of an icon?

  - by RED_

  Hi there, Bit of a newbie when it comes to android, only been working on it properly for a few days but even after all the searching I've done im stumped and nobody seems to know how to help me. I have this so far: http://img263.imageshack.us/i/sellscreen.jpg How can I move the text to be besides each icon rather than underneath it? Hoping the gallery won't be moved either. Here is the code i have: <?xml version="1.0" encoding="utf-8"?> <ScrollView xmlns:android="http://schemas.android.com/apk/res/android" android:id="@+id/scroller" android:layout_width="fill_parent" android:layout_height="fill_parent" android:fillViewport="true" > <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" android:orientation="vertical" android:layout_width="fill_parent" android:layout_height="fill_parent" > <Gallery xmlns:android="http://schemas.android.com/apk/res/android" android:id="@+id/gallery" android:layout_width="fill_parent" android:layout_height="wrap_content"/> <ImageView android:id="@+id/test_image" android:src="@drawable/icon" android:layout_width="wrap_content" android:layout_height="wrap_content"/> <TextView android:layout_width="fill_parent" android:layout_height="wrap_content" android:text="The offcial UK driving theory test application. Over 190 questions." /> <ImageView android:id="@+id/test_image" android:src="@drawable/icon" android:layout_width="wrap_content" android:layout_height="wrap_content"/> <TextView android:layout_width="fill_parent" android:layout_height="wrap_content" android:text="The offcial UK driving theory test application. Over 190 questions."/> <ImageView android:id="@+id/test_image" android:src="@drawable/icon" android:layout_width="wrap_content" android:layout_height="wrap_content"/> <TextView android:layout_width="fill_parent" android:layout_height="wrap_content" android:text="The offcial UK driving theory test application. Over 190 questions."/> <ImageView android:id="@+id/test_image" android:src="@drawable/icon" android:layout_width="wrap_content" android:layout_height="wrap_content"/> <TextView android:layout_width="fill_parent" android:layout_height="wrap_content" android:text="The offcial UK driving theory test application. Over 190 questions."/> <ImageView android:id="@+id/test_image" android:src="@drawable/icon" android:layout_width="wrap_content" android:layout_height="wrap_content" /> <TextView android:layout_width="fill_parent" android:layout_height="wrap_content" android:text="The offcial UK driving theory test application. Over 190 questions." /> </LinearLayout> </ScrollView> Top half of my code doesn't seem to be showing for some reason but it's just the opening of the linear layout. I will be forever grateful to anyone that can help, i've been racking my brains for days and getting nowhere. Really getting stressed out by it. Thanks in advance!!

  Read the article

• Why does one loop take longer to detect a shared memory update than another loop?

  - by Joseph Garvin

  I've written a 'server' program that writes to shared memory, and a client program that reads from the memory. The server has different 'channels' that it can be writing to, which are just different linked lists that it's appending items too. The client is interested in some of the linked lists, and wants to read every node that's added to those lists as it comes in, with the minimum latency possible. I have 2 approaches for the client: For each linked list, the client keeps a 'bookmark' pointer to keep its place within the linked list. It round robins the linked lists, iterating through all of them over and over (it loops forever), moving each bookmark one node forward each time if it can. Whether it can is determined by the value of a 'next' member of the node. If it's non-null, then jumping to the next node is safe (the server switches it from null to non-null atomically). This approach works OK, but if there are a lot of lists to iterate over, and only a few of them are receiving updates, the latency gets bad. The server gives each list a unique ID. Each time the server appends an item to a list, it also appends the ID number of the list to a master 'update list'. The client only keeps one bookmark, a bookmark into the update list. It endlessly checks if the bookmark's next pointer is non-null ( while(node->next_ == NULL) {} ), if so moves ahead, reads the ID given, and then processes the new node on the linked list that has that ID. This, in theory, should handle large numbers of lists much better, because the client doesn't have to iterate over all of them each time. When I benchmarked the latency of both approaches (using gettimeofday), to my surprise #2 was terrible. The first approach, for a small number of linked lists, would often be under 20us of latency. The second approach would have small spats of low latencies but often be between 4,000-7,000us! Through inserting gettimeofday's here and there, I've determined that all of the added latency in approach #2 is spent in the loop repeatedly checking if the next pointer is non-null. This is puzzling to me; it's as if the change in one process is taking longer to 'publish' to the second process with the second approach. I assume there's some sort of cache interaction going on I don't understand. What's going on?

  Read the article

• java.net.SocketException: Software caused connection abort: socket write error

  - by npinti

  Hi guys, I am trying to send an image from a Java desktop application to a J2ME application. The problem is that I am getting this exception: java.net.SocketException: Software caused connection abort: socket write error I have looked around on the net, and although this problem is not that rare, I was unable to find a concrete solution. I am transforming the image into a byte array before transferring it. These are the methods found on the desktop application and on the J2ME respectively public void send(String ID, byte[] serverMessage) throws Exception { //Get the IP and Port of the person to which the message is to be sent. String[] connectionDetails = this.userDetails.get(ID).split(","); Socket sock = new Socket(InetAddress.getByName(connectionDetails[0]), Integer.parseInt(connectionDetails[1])); OutputStream os = sock.getOutputStream(); for (int i = 0; i < serverMessage.length; i++) { os.write((int) serverMessage[i]); } os.flush(); os.close(); sock.close(); } private void read(final StreamConnection slaveSock) { Runnable runnable = new Runnable() { public void run() { try { DataInputStream dataInputStream = slaveSock.openDataInputStream(); int inputChar; StringBuffer results = new StringBuffer(); while ( (inputChar = dataInputStream.read()) != -1) { results.append((char) inputChar); } dataInputStream.close(); slaveSock.close(); parseMessage(results.toString()); results = null; } catch(Exception e) { e.printStackTrace(); Alert alertMsg = new Alert("Error", "An error has occured while reading a message from the server:\n" + e.getMessage(), null, AlertType.ERROR); alertMsg.setTimeout(Alert.FOREVER); myDisplay.setCurrent(alertMsg, resultScreen); } } }; new Thread(runnable).start(); } I am sending the message across a LAN, and I have no problems when I send short text messages instead of images. Also, I used wireshark and it seems that the desktop application is only sending part of the message. Any help would be highly appreciated. Also, everything works on the J2ME simulator. Thanks.

  Read the article

• Scaled ellipse over button, button not clickable

  - by user336720

  Hi, I'm scaling an ellipse in an animation with the following code: ScaleTransform myScTransform = new ScaleTransform(); TransformGroup myTransGroup = new TransformGroup(); myTransGroup.Children.Add(myScTransform); newPHRadio.RenderTransform = myTransGroup; newPHRadio.RenderTransformOrigin = new Point(0.5, 0.5); Storyboard story = new Storyboard(); DoubleAnimation xAnimation = new DoubleAnimation(1, ph.Bereik, new Duration(TimeSpan.FromSeconds(2))); DoubleAnimation yAnimation = new DoubleAnimation(1, ph.Bereik, new Duration(TimeSpan.FromSeconds(2))); DoubleAnimation doorzichtig = new DoubleAnimation(1, 0, new Duration(TimeSpan.FromSeconds(2))); Storyboard.SetTarget(xAnimation, newPHRadio); Storyboard.SetTarget(yAnimation, newPHRadio); Storyboard.SetTarget(doorzichtig, newPHRadio); DependencyProperty[] propertyChainX = new DependencyProperty[] { Ellipse.RenderTransformProperty, TransformGroup.ChildrenProperty, ScaleTransform.ScaleXProperty }; DependencyProperty[] propertyChainY = new DependencyProperty[] { Ellipse.RenderTransformProperty, TransformGroup.ChildrenProperty, ScaleTransform.ScaleYProperty }; string thePath = "(0).(1)[0].(2)"; Storyboard.SetTargetProperty(xAnimation, new PropertyPath(thePath, propertyChainX)); Storyboard.SetTargetProperty(yAnimation, new PropertyPath(thePath, propertyChainY)); Storyboard.SetTargetProperty(doorzichtig, new PropertyPath(Ellipse.OpacityProperty)); story.Children.Add(xAnimation); story.Children.Add(yAnimation); story.Children.Add(doorzichtig); story.Duration = new Duration(TimeSpan.FromSeconds(60 / ph.Frequentie)); story.RepeatBehavior = RepeatBehavior.Forever; story.Begin(); The ellipse is constructed with the following code: Ellipse newPHRadio = new Ellipse(); newPHRadio.Width = 1; newPHRadio.Height = 1; newPHRadio.SetValue(Canvas.LeftProperty, ph.xPositie + 7); newPHRadio.SetValue(Canvas.TopProperty, ph.yPositie + 7); newPHRadio.SetValue(Canvas.ZIndexProperty, 3); newPHRadio.Stroke = new SolidColorBrush(Colors.Black); newPHRadio.StrokeThickness = 0.03; Now the ellipse is scaled over an button which has a z-index of 1. With a static ellipse and no fill, the button is clickable. Now there is no fill as well but the button is not clickable. Can someone tell me how to fix this?

  Read the article

• Xcache - No different after using it

  - by Charles Yeung

  Hi I have installed Xcache in my site(using xampp), I have tested more then 10 times on several page and the result is same as default(no any cache installed), is it something wrong with the configure? Updated [xcache-common] ;; install as zend extension (recommended), normally "$extension_dir/xcache.so" zend_extension = /usr/local/lib/php/extensions/non-debug-non-zts-xxx/xcache.so zend_extension_ts = /usr/local/lib/php/extensions/non-debug-zts-xxx/xcache.so ;; For windows users, replace xcache.so with php_xcache.dll zend_extension_ts = C:\xampp\php\ext\php_xcache.dll ;; or install as extension, make sure your extension_dir setting is correct ; extension = xcache.so ;; or win32: ; extension = php_xcache.dll [xcache.admin] xcache.admin.enable_auth = On xcache.admin.user = "mOo" ; xcache.admin.pass = md5($your_password) xcache.admin.pass = "" [xcache] ; ini only settings, all the values here is default unless explained ; select low level shm/allocator scheme implemenation xcache.shm_scheme = "mmap" ; to disable: xcache.size=0 ; to enable : xcache.size=64M etc (any size > 0) and your system mmap allows xcache.size = 60M ; set to cpu count (cat /proc/cpuinfo |grep -c processor) xcache.count = 1 ; just a hash hints, you can always store count(items) > slots xcache.slots = 8K ; ttl of the cache item, 0=forever xcache.ttl = 0 ; interval of gc scanning expired items, 0=no scan, other values is in seconds xcache.gc_interval = 0 ; same as aboves but for variable cache xcache.var_size = 4M xcache.var_count = 1 xcache.var_slots = 8K ; default ttl xcache.var_ttl = 0 xcache.var_maxttl = 0 xcache.var_gc_interval = 300 xcache.test = Off ; N/A for /dev/zero xcache.readonly_protection = Off ; for *nix, xcache.mmap_path is a file path, not directory. ; Use something like "/tmp/xcache" if you want to turn on ReadonlyProtection ; 2 group of php won't share the same /tmp/xcache ; for win32, xcache.mmap_path=anonymous map name, not file path xcache.mmap_path = "/dev/zero" ; leave it blank(disabled) or "/tmp/phpcore/" ; make sure it's writable by php (without checking open_basedir) xcache.coredump_directory = "" ; per request settings xcache.cacher = On xcache.stat = On xcache.optimizer = Off [xcache.coverager] ; per request settings ; enable coverage data collecting for xcache.coveragedump_directory and xcache_coverager_start/stop/get/clean() functions (will hurt executing performance) xcache.coverager = Off ; ini only settings ; make sure it's readable (care open_basedir) by coverage viewer script ; requires xcache.coverager=On xcache.coveragedump_directory = "" Thanks you

  Read the article

• ServiceController.Stop() doesn't appear to be stopping anything

  - by peacedog

  My dev box is a Windows 7 (x64) machine. I've got some code (C#, .net 2.0) that in certain circumstances, checks to see if a service is running and then stops it. ServiceController matchedService = //My Service! //If statements and such matchedService.Stop(); matchedService.WaitForStatus(ServiceControllerStatus.Stopped); Now, I can verify MyService is in fact installed and running. I can tell you I am running Visual Studio 2008 as an administrator while debugging. I can also verify that after a couple of If statements, I wind up at the .Stop() and .WaitForStatus() portion of the programming. I do know that if step over the .Stop() call, the service itself just keeps running (looking at it in Services, though it occurs to me perhaps I should grab a better tool for this. I'm sure there's some sysinternals tool that might give me more information). As I step over the .WaitForStatus() call, I basically wind up waiting for the stopped status. . . forever. Well, I let it sit there for over 15 minutes yesterday (twice) and nothing happens. We never make it to the next line of code. It feels exactly like Bowie's Space Oddity (you know the part I am talking about). There's a lotta things about MyService you don't know anything about. Things you wouldn't understand. Things you couldn't. . . let me state this plainly. No services depend on MyService and MyService depends on no other services. Addendum MyOtherService and SonOfMyService both seem to behave correctly at this point in the code. All of these services share the same characteristics (they're our own services we hatched in a secret lab and have no dependencies). Is it possible there is something wrong with the MyService install or something? I do know that if I stop debugging at this point, MyService is still listed as running in Services (even after hitting refresh). If I try to restart it then (or run my application again and get to this point), I get a message about it not being able to accept control messages. After that, the service shows up as stopped and I can start it normally. Why isn't the service being stopped? Is this a quirk of win 7? A failing on my part to understand the ServiceController, or Win Services in general?

  Read the article

• How to solve Python memory leak when using urrlib2?

  - by b_m

  Hi, I'm trying to write a simple Python script for my mobile phone to periodically load a web page using urrlib2. In fact I don't really care about the server response, I'd only like to pass some values in the URL to the PHP. The problem is that Python for S60 uses the old 2.5.4 Python core, which seems to have a memory leak in the urrlib2 module. As I read there's seems to be such problems in every type of network communications as well. This bug have been reported here a couple of years ago, while some workarounds were posted as well. I've tried everything I could find on that page, and with the help of Google, but my phone still runs out of memory after ~70 page loads. Strangely the Garbege Collector does not seem to make any difference either, except making my script much slower. It is said that, that the newer (3.1) core solves this issue, but unfortunately I can't wait a year (or more) for the S60 port to come. here's how my script looks after adding every little trick I've found: import urrlib2, httplib, gc while(true): url = "http://something.com/foo.php?parameter=" + value f = urllib2.urlopen(url) f.read(1) f.fp._sock.recv=None # hacky avoidance f.close() del f gc.collect() Any suggestions, how to make it work forever without getting the "cannot allocate memory" error? Thanks for advance, cheers, b_m update: I've managed to connect 92 times before it ran out of memory, but It's still not good enough. update2: Tried the socket method as suggested earlier, this is the second best (wrong) solution so far: class UpdateSocketThread(threading.Thread): def run(self): global data while 1: url = "/foo.php?parameter=%d"%data s = socket.socket(socket.AF_INET, socket.SOCK_STREAM) s.connect(('something.com', 80)) s.send('GET '+url+' HTTP/1.0\r\n\r\n') s.close() sleep(1) I tried the little tricks, from above too. The thread closes after ~50 uploads (the phone has 50MB of memory left, obviously the Python shell has not.) UPDATE: I think I'm getting closer to the solution! I tried sending multiple data without closing and reopening the socket. This may be the key since this method will only leave one open file descriptor. The problem is: import socket s=socket.socket(socket.AF_INET, socket.SOCK_STREAM) socket.connect(("something.com", 80)) socket.send("test") #returns 4 (sent bytes, which is cool) socket.send("test") #4 socket.send("test") #4 socket.send("GET /foo.php?parameter=bar HTTP/1.0\r\n\r\n") #returns the number of sent bytes, ok socket.send("GET /foo.php?parameter=bar HTTP/1.0\r\n\r\n") #returns 0 on the phone, error on Windows7* socket.send("GET /foo.php?parameter=bar HTTP/1.0\r\n\r\n") #returns 0 on the phone, error on Windows7* socket.send("test") #returns 0, strange... *: error message: 10053, software caused connection abort Why can't I send multiple messages??

  Read the article

• iPhone app works hundreds of times, then crashes from memory error on startup, then never works unti

  - by peter

  I have a Cocos2d/openGL iPhone game. It's a universal app and I'm dealing with an occasional but nasty error on the iPad. We are loading a lot of textures up front (3 2048x2048 textures). I'm working on reducing this up front load, but what worries me is I really don't understand the root cause of this crash that permanently breaks the app. This is the deal: 1. App works fine for hundreds of plays on the iPad 2. Eventually (I'm guessing due to other programs using up some memory and not letting go or whatever) the app starts crashing on startup. It just closes again in the middle of loading. 3. The App will now never work again on that iPad, closing immediately every time, until the iPad is restarted. Obviously my app is demanding too much memory up front to work reliably every time, I get that. What I don't get is why when it fails once, it has failed forever until the iPad is restarted. Can anyone explain what is going on here? EDIT: forgot to add organizer crash lags just say low memory, like this every time (I changed my app name to MyAppName below). Again, I know it's low memory, but why does it stay low memory until restart?: Incident Identifier: E7A2507C-3FB1-4E3B-B315-09F094236541 CrashReporter Key: 0fda9d667f2c6073f20a76809aa25438b6854d15 OS Version: iPhone OS 3.2 (7B367) Date: 2010-04-30 16:59:44 -0400 Free pages: 437 Wired pages: 17228 Purgeable pages: 0 Largest process: MyAppName Processes Name UUID Count resident pages MyAppName <6307ce41802850944baa78d29224fa7f> 22385 (jettisoned) (active) mediaserverd <ea8bac28b06fe3980fdd44b5caceb563> 242 DTMobileIS <a0f651e43881e66f50f8a95abea72921> 5826 notification_pro <4c9a7ee0a5bbe160465991228f2d2f2e> 67 syslog_relay <4ceaed776d2df957fa130712f4ef21d0> 66 notification_pro <4c9a7ee0a5bbe160465991228f2d2f2e> 67 notification_pro <4c9a7ee0a5bbe160465991228f2d2f2e> 67 afcd <4f3c9566e33b4463f05603d990584e5d> 72 ptpd <83de0f774bd6553d513ae9e19b0f9b56> 181 syslogd <66247e305d5c0bf6f1ce1cc950653263> 81 lsd <a4d852c1c8da2b3d231bdc90887b52ba> 130 iapd <a8534cbde4b90ad5915dd26ab03ff3e3> 204 notifyd <5e9d5bee7c3eae1c8b494c79eb11406e> 71 BTServer <64e4a6ea6b1240db2331e05a29caa862> 108 CommCenter <97bf297944ac4bde19bcee96dd23bd5f> 181 SpringBoard <c7a5904c12db7b14334a4edaa4cabaa9> 5339 (active) configd <aca9fa3380322669164fd6b1a3864300> 373 fairplayd.K48 <2d997ffca1a568f9c5400ac32d8f0782> 84 locationd <dd1ea88105c62173908ce767db5c4d37> 599 mDNSResponder <820560222d47a1f2a0dce98a7f8a9721> 108 lockdownd <497fd54c79a680bf29f5d9320f514613> 303 MobileStorageMou <c277b79c2157c4dc5cfc5c3ca35bd5f2> 69 launchd <66972eee4d865c4383b33d985d22994b> 98 **End**

  Read the article

< Previous Page | 38 39 40 41 42 43 44 45 46 47  | Next Page >