Search Results

Search found 5243 results on 210 pages for 'mirror drivers'.

Page 42/210 | < Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >

• ATI driver in Fedora linux 11

  - by unknown (google)

  I recently built a pc with an ATI Radeon HD 5750. I have installed Fedora 11 and installed the device driver for the Radeon 5700 series proprietary drivers. I wanted to see if there is graphics hardware acceleration. I typed in glxinfo at the terminal and I got: X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 135 (GLX) Minor opcode of failed request: 19 (X_GLXQueryServerString) Serial number of failed request: 14 Current serial number in output stream: 14 I don't know how to fix this. I tried to go to the ATI Catalyst Control Center; that worked, but the ATI Catalyst Control Center (Administrator) doesn't work. If anyone knows how to fix this problem then please let me know. Thanks

  Read the article

• Window 7 not recognizing printer for driver (re)installation

  - by user55406

  OK I am having this printer problem. I had a user delete her printer. Please don't ask, I don't know. She is using an HP deskjet 6940 printer, and for her desktop she has an HP dx2400, with Windows 7. When I plug in the USB cable it should install the new drivers, but it does not. I believe you guys don't need to know my network setup. I could be wrong. If you guys here at serverfault could help that will be great. :)

  Read the article

• Installing ethernet controller driver after clean windows XP install

  - by user1488804

  I've been having trouble getting internet access through an ethernet connection since doing a fresh install of windows XP. It appears that I'm missing the driver for the ethernet controller. Looking in 'device manager' under the network adapters section there's an apparently working '1394 Net Adaptor' but under unknown devices there's the question-marked ethernet controller, which I believe is what I want the driver for. I found an old cd that contains the driver for it (Realtek 8139 or some 81xx). There's no setup tool, but only 3 files (a .cat file, .inf file and .sys file). I've tried right-clicking on the .inf file and using 'install' and also tried just copying the .sys file into the system32/drivers folder but neither have got me anywhere after restarting. The ethernet controller is still listed in 'unknown devices'. EDIT: I've also tried updating the driver in the device manager, pointing it at the folder containing the driver, but this hasn't worked either. Any ideas? Thanks

  Read the article

• How can I disable my laptop's built-in keyboard?

  - by sam

  I have a HP Compaq Presario C700 laptop with Windows 7 installed on it. My laptop's keyboard is not working properly; some keys never work and some keys will keep on pressing. I've formatted the OS but it didn't solve my problem. I bought an external USB keyboard and it works well. As some keys in the built-in keyboard activate themselves, I still couldn't work effectively. After searching Google I tried the following steps to disable the built-in keyboard: Disabled keyboard drivers: This didn't work because when the system reboots, the driver gets installed again automatically. Installed irrelevant driver for keyboard: This failed - I couldn't install the driver. After rebooting it installed the correct driver automatically. Can anyone help explain how I can temporarily uninstall my built-in keyboard? I don't want to remove it manually (removing the hardware cable).

  Read the article

• When XP is asleep for a long time LAN reports code 43, gives up the ghost.

  - by seeanimal

  This one's got me stumped. Whenever the system is asleep for a long time, e.g overnight, the LAN driver reports error code 43 ("a problem") and turns itself off. This has being going on for months, but I never caught the problem until now. The owner merely shuttles back to a restore point I set her when the machine worked. Previously (without knowing exactly what was happening) I have tried everything to resolve this. Manually resetting the TCP/IP, fiddling with the driver Wake From LAN settings, DIFFERENT drivers, etc. etc. The solution is easy, uninstalling and reinstalling the driver. Understandably, though, the user is uncomfortable with this operation and the problem persists. What's causing it and how to stop it recurring? Any ideas? Thanks in advance to this great community. XP home SP3, Marvell Yukon 88E8056 PCI-E Gigabit Ethrnet Controller, version 10.22.7.3 (yk51x86.sys)

  Read the article

• USB hardwares driver installation

  - by unknown (google)

  I am using few USB hardwares like camera and scanners with my software application. I plugged my hardware in USB A installed the drivers and the device was working properly. Now I tried to connect the same hardware in USB B (ie, some other USB port), and again it is asking for the driver installation. I need to know the reason behind this. Is it something to do with the particular device or system? Anywork around for this during the first time driver installation? Please anyone explain me how the USB works physical address, how it is assigned and how the driver for a device getting installed. Thanks in advance.

  Read the article

• Several devices in Device Manager have Code 3 error

  - by John Straka

  One of our users' machines (Dell Optiplex 380 running Windows 7 32-bit) is having a weird driver issue. A bunch of devices have Error Code 3: The driver for this device might be corrupted, or your system may be running low on memory or other resources. (Code 3) The system isn't low on memory (only 1GB in use out of whatever the max for 32-bit is.) Here's a screenshot of the affected devices: I tried reinstalling the chipset and audio drivers to no avail. I have no idea what prompted it, and I'm not sure how the basic Windows Generic PnP Monitor driver could even be corrupted. What might be causing this error?

  Read the article

• How to recover data from Dell dimension 9150 RAID 0 on another system?

  - by Adam

  I have a Dell Dimension 9150 which has failed. I'm trying to recover the data. It had two SATA 250GB drives in RAID 0 configuration. I'm trying to use a shuttle PC running Windows7 to recover the data from the drives which contained an XP boot volume. I just want the data, it doesn't have to boot. What program would I need to rebuild / interrogate the drives (one of them is failing the onboard hardware test)? What drivers would I need to install? Windows7 sees the drive as one partition but doesn't see volume information. Ubuntu can see the drive as one partition and also can tell what the drive is called, but can't access the data Any help appreciated!! :)

  Read the article

• Printer demands specific USB port

  - by snitzr

  My HP laptop has 3 USB ports. When I add my printer driver by plugging into one of those ports, the driver installs fine. Problem: I have to install 3 identical drivers. One for each USB port. Depending on what USB port I have the printer plugged into, I have to pick the driver for that port. Question: How do I print to any of the three ports automatically based on what port the printer is in? Further into: In Devices and Printers Printer Properties Ports... I cannot select more than one port for a printer driver to print to.

  Read the article

• No audio driver for ECS 7050-M v1.0a for Windows 7?

  - by NudeRaider

  I have an Elitegroup 7050-M v1.0a motherboard and I've used the Realtek HD audio driver it came with for years under Windows XP. There was a nice mixer panel, an equalizer and sound profiles that added effects. All of these menus are gone now that I've moved on to Windows 7 64 Bit. All I have is the basic settings under system control - sound, but they are not nearly as detailed. To clarify: Sound works, but the advanced settings I got when using older OS's are gone. Older drivers don't seem to work under Win7 and I can't find one for Win7. So how can I fully utilize the capabilities of my HD sound chip under Win7?

  Read the article

• Which LAN driver should I use for Asus F5Z ?

  - by Radek

  A friend of mine asked me to re-install his Asus F5Z notebook with Windows XP. I installed successfully all drivers from Asus driver download site. Everything is working fine but the Ethernet driver. The installation of Lan Driver for Windows XP finishes with strange message "Please shutdown & plug Realtech PCI-e card to complete the installation. Not sure if it matters but OnChip SATA is in 'Native IDE' mode . The original one with Vista was 'IDE - AHCI mode'. Any idea how I can make the LAN adapter to work under Windows XP?

  Read the article

• Multi-monitor resolution and position settings lost after reboot

  - by SoftDeveloper

  I've had two 1280x1024 monitors running for years on an nVidia 8800GT card with no problems. I've now replaced one monitor with a new 2560x1440 one. The card seems to support both fine, however every time I reboot the resolutions and monitor positions revert to the old settings. I've tried upgrading, downgrading, stripping out and reinstalling many versions of the nvidia drivers to no avail. Logging in as another user doesn't help - same problem. Booting into another another OS (Win7 64) works OK, so it is just this OS installation. During boot up everything looks fine (ie native 2450x1440 res) until the nVidia control panel or something is loaded which flips it back into the old mode. I have no old saved nvidia profiles. I can't find anything in the registry relating to these old settings. Its driving me crazy having to set resolutions and realign monitors on every reboot! Can anybody help?

  Read the article

• How to add network printer remotely without knowing the IP?

  - by Steve

  Assume your friend from over 100km away asked you to add a network printer to his computer since you're so tech savvy. How would you add network printer remotely in this case? You would need: 0. Remote connection to your friend's computer 1. Printer IP and brand/model names 2. Respective drivers downloaded either from manufacturer's website or Windows Update driver Question is, how would you find out the IP address of the printer without bothering your friend too much with technical steps? Since your friend isn't as tech savvy as you - they wouldn't know which buttons to press to get IP address.

  Read the article

• 2 identical PCs - can I swap a single hard drive between and expect Windows 7/XP to work?

  - by rgvcorley

  I currently work in 2 different locations, traveling between the 2 every few weeks or so. I currently have screens, kb, mouse etc... in both locations, so I just pick up my tower case when I want to move to the other location. However to make moving easier I was thinking of buying 2 tower cases with hot swappable drive bays on the front and installing identical hardware in each one. This would allow me to pull the drives out and just take them with me and plug them into the PC at the other location. Would windows 7 complain? I'm not fussed about buying licenses for both PCs, but would I have any problems with drivers due to the different serial numbers of the components?

  Read the article

• 2 identical PCs - can I swap a single hard drive between and expect Windows 7 to work? [closed]

  - by rgvcorley

  I currently work in 2 different locations, traveling between the 2 every few weeks or so. I currently have screens, kb, mouse etc... in both locations, so I just pick up my tower case when I want to move to the other location. However to make moving easier I was thinking of buying 2 tower cases with hot swappable drive bays on the front and installing identical hardware in each one. This would allow me to pull the drives out and just take them with me and plug them into the PC at the other location. Would windows 7 complain? I'm not fussed about buying licenses for both PCs, but would I have any problems with drivers due to the different serial numbers of the components?

  Read the article

• ViewSonic LCD Monitor Touch-input

  - by Synetech inc.

  I bought a used 15" ViewSonic LCD monitor (VP150m) and noticed that it has a 3.5mm connector on the back labeled “touch i/o”. I’m trying to figure out how to use the touch function but am having trouble finding anything useful. First, I cannot find any information on what kind of cable it uses (TS, TRS, TRRS, etc.), or how to connect it to the computer. Second, I cannot find touch drivers for it—though I can find a page that mentions how easy it is to install them. Does anyone have any information on using the touchscreen function of the VP150m? Thanks a lot.

  Read the article

• How do I get my XFX Radeon HD 7870 to work with 3 monitors using HDMI, DVI, and Mini DisplayPort?

  - by user88792

  I bought a XFX Double D FX-787A-CDFC Radeon HD 7870 and set it up using the HDMI, DVI and Mini DisplayPort (using an Apple mDP-to-VGA adapter). I hooked it up, installed the drivers and rebooted. The image came up on the third monitor in a weird resolution. Why did this happen and how can I fix it? I am using Windows 7 Ultimate and the system is completely updated. Side note: When I disconnect the Mini DisplayPort adapter it works fine, however for my work I need 3-4 monitors.

  Read the article

• Image Management System with Different Levels of Access

  - by Jason

  I work in the graphics department for a real estate brokerage, and we deal with a lot of photos. Agents take the photos, upload them to me, I touch up and standardize the photos, then I add them to an in-house server for future use by the graphics dept. I'd like to make the "sanitized" photo files available to the agents to use when they want, but I don't want the agents poking around the graphics department's files (things get misplaced, renamed and messed up in a hurry). What would be perfect is if we could create a read-only "mirror" (correct term?) of that server that could be accessed by the agents as needed, but which wouldn't feed back into our "sanitized" file system. Edit: I'm looking for an automatic solution... manually posting the files to two separate locations seems like an inelegant solution when working digitally. Edit: I'm trying to avoid any access barriers to the public (dirty) file system (however it's finally implemented). There are 40-50 real estate agents who need to access these files, half of whom can't reliably download an email attachment.

  Read the article

• System restore with no mouse or keyboard.

  - by user62371

  I accidentally installed some USB drivers to my Windows 7 system, they were the wrong ones and now my keyboard and mouse won't work. A system restore would get rid of them, but obviously I can't control my computer to make that happen. Keyboard and mouse still work before windows has loaded, in the BIOS and boot system, so can I do anything from there? I've already tried booting into another OS, accessing my windows filesystem and deleting the Program Files entry, but it didnt work so they must go deeper than that. Or could i launch it from a remote machine? I've got some VNC server insalled so if i could get that running that could work.

  Read the article

• Nvidia Drivers on Debian / Lenny (Stable) -> Installation successful -> Monitors gets black

  - by David

  I have successfully installed the proprietary drivers for my nvidia (geforce 7300 gt) graphics card on debian/lenny. I know its not the best way to chose for driver installation ( see this link: http://wiki.debian.org/NvidiaGraphicsDrivers#non-freedrivers ). but the two ways seem to be possible for me (nvidia-kernel module compilation). Now the problem is that the monitors gets black, the power light starts blinking after i launch the x-server. Have a short look a the logs (output truncated from /var/log/Xorg.0.log): (II) Setting vga for screen 0. (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 (==) NVIDIA(0): RGB weight 888 (==) NVIDIA(0): Default visual is TrueColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (**) Jul 28 17:10:11 NVIDIA(0): Enabling RENDER acceleration (II) Jul 28 17:10:11 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is (II) Jul 28 17:10:11 NVIDIA(0): enabled. (II) Jul 28 17:10:11 NVIDIA(0): NVIDIA GPU GeForce 7300 GT (G73) at PCI:1:0:0 (GPU-0) (--) Jul 28 17:10:11 NVIDIA(0): Memory: 262144 kBytes (--) Jul 28 17:10:11 NVIDIA(0): VideoBIOS: 05.73.22.25.00 (II) Jul 28 17:10:11 NVIDIA(0): Detected PCI Express Link width: 16X (--) Jul 28 17:10:11 NVIDIA(0): Interlaced video modes are supported on this GPU (--) Jul 28 17:10:11 NVIDIA(0): Connected display device(s) on GeForce 7300 GT at PCI:1:0:0: (--) Jul 28 17:10:11 NVIDIA(0): Samsung SyncMaster (CRT-0) (--) Jul 28 17:10:11 NVIDIA(0): Samsung SyncMaster (DFP-0) (--) Jul 28 17:10:11 NVIDIA(0): Samsung SyncMaster (CRT-0): 400.0 MHz maximum pixel clock (--) Jul 28 17:10:11 NVIDIA(0): Samsung SyncMaster (DFP-0): 165.0 MHz maximum pixel clock (--) Jul 28 17:10:11 NVIDIA(0): Samsung SyncMaster (DFP-0): Internal Single Link TMDS (II) Jul 28 17:10:11 NVIDIA(0): Assigned Display Device: CRT-0 (==) Jul 28 17:10:11 NVIDIA(0): (==) Jul 28 17:10:11 NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select" (==) Jul 28 17:10:11 NVIDIA(0): will be used as the requested mode. (==) Jul 28 17:10:11 NVIDIA(0): (II) Jul 28 17:10:11 NVIDIA(0): Validated modes: (II) Jul 28 17:10:11 NVIDIA(0): "nvidia-auto-select" (II) Jul 28 17:10:11 NVIDIA(0): Virtual screen size determined to be 1280 x 1024 (--) Jul 28 17:10:11 NVIDIA(0): DPI set to (85, 86); computed from "UseEdidDpi" X config (--) Jul 28 17:10:11 NVIDIA(0): option (==) Jul 28 17:10:11 NVIDIA(0): Enabling 32-bit ARGB GLX visuals. (--) Depth 24 pixmap format is 32 bpp Here is the complete /etc/X11/xorg.conf file as generated by nvidia-xconfig: # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 256.35 (buildmeister@builder101) Wed Jun 16 19:25:59 PDT 2010 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "Module" Load "dbe" Load "extmod" Load "type1" Load "freetype" Load "glx" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" Hor

  Read the article

• Making my site login "mirror" Facebook login

  - by lawrence

  I've noticed that Huffington Post does this: if you log out of there, it forces you to log out of Facebook as well, and if you log in on Facebook and go back to Huffington Post, it automatically logs you in there as well. Is this a straightforward use of the FB Connect API that I just haven't noticed, or is there some trick?

  Read the article

• Google and Mirror Websites

  - by Roberto Aloi

  Which is the best way to manage a website with one or more mirrors so that: Google don't consider it as "dupicated content" The website is correctly indexed No inconsistencies or duplicated information are present in Google Analytics The Google webmaster guidelines in general are respected NOTE: I'm not sure if I should ask this question here or in ServerFault. It looks a bit in the middle between programming and server administration. Let me know if you think ServerFault represent a more appropriate place for this and I'll move it. Thanks.

  Read the article

• How can I 'mirror' my git repository locally?

  - by michael

  Hi, I have followed the following instructions in setting a git repository locally in one of my hard drive (1): https://trac.webkit.org/wiki/UsingGitWithWebKit I would like to know if it is possible for me to set up another repository in a different hard drive which mirrors the one I setup in (1)? By mirrors, I mean if I commit some changes the other repository can retrieve it. Thank you.

  Read the article

• SQL query to print mirror labels

  - by Eric

  I want to print labels in words as returned by a SQL query such as follow. 1 2 3 4 5 6 When I want to print the reverse of those labels, I have to print them as follow 3 2 1 6 5 4 In my real case, I have 5 colums by 2 rows, how can I formulate my query so that my records are ordered like the second one. The normal ordering is handled by word, so my query is like SELECT * FROM Products ORDER BY Products.id I'm using MS Access =( EDIT : Just to make it clear I'd like my records to be ordered such as 3 2 1 6 5 4 9 8 7 12 11 10 EDIT2 : my table looks like this ID ProductName 1 Product1 2 Product2 3 Product3 n Product[n] I want the ids to be returned as I mentioned above

  Read the article

• Testing Web Application: "Mirror" ad-hoc testing in another window

  - by Narcissus

  I don't even really know if the title is the best way to explain what I'm trying to do, but anyway... We have a web app that is being ported to a number of DB backends via MDB2. Our unit tests are pretty lacking at the moment, but our internal users are pretty good at knowing what to test to see if things are broken. What I'm 'imagining' is a browser plug in (don't really care which browser it is for) or a similar system that essentially takes every event from one window and 'mirrors' it in the other browser/s. The reason I'd like this is so that I can have various installations that use different DB backends, and have the user open a window/tab to each installation. From there, however, I'd like them to be able to 'work' in one window and have that 'work' I occur at the same time in each of the 'cloned' windows. From there, they should be able to do some quick eyeballing of the information that comes back, without having to worry about timing differences and so (very much). I know it's a big ask, but I figure if anyone knows of a solution, I'd find it here... Any thoughts?

  Read the article

< Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >