Search Results

Search found 69106 results on 2765 pages for 'missing data'.

Page 42/2765 | < Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >

• On a failing hard drive, I am able to view data but unable to copy it - why?

  - by Tom

  I have a 2.5" external hard drive that is failing. It's not making the expected 'clicking' noise that most hard drives and I am able to view the data, but I am unable to actually retrieve the data. I attempted to use SpinRite in order to access the data on the drive, but it didn't like the external drive. When I view the drive's property page, the drive shows that it's used space is at 100% and that it has 0 bytes available; however, the progress indicator under the drive icon in Windows Explorer shows that it's roughly 50% full (which is correct). When I attempt to run Windows' "Error Checking" tool and attempt to "scan for an attempt recovery of bad sectors," the tool begins to run then immediately closes with no error message. I am able to browse the contents of the drive using Windows Explorer. When I begin to try copying any given single file, the copy process begins, an indicator starts, and then the copy fails with no real error message. The Disk Management page in Computer Management under Control Panel also shows this drive has being 'Healthy.' I dropped the drive off at a data recovery store and they said that "The data seems to be intact, but an internal failure is preventing any information from being retrieved." They offered to provide me references to a data recovery specialist. I've also attempted to run CHKDSK on the drive (with and without arguments) but it returns the following error: The type of the filesystem is RAW. CHKDSK is not available for RAW drives. Before going the route of more expensive data recovery, I'm wondering if these symptoms sound familiar to anyone? Other questions... I'm willing to continue trying tools such as TestDisk and/or PhotoRec (as the majority of the data that I'd like to salvage are photos) but how long I should expect either tool to run given approximately 400GB of data? I'm also comfortable using Linux so I welcome any suggestions for utilities or tools and strategies with which you've had success.

  Read the article

• Is there any chance that my data will get silently corrupted with a robocopy SMB network transfer?

  - by Archagon

  I'm setting up a NAS box for the first time. At the moment, I have most of my data backed up to a few local hard drives, and I intend to transfer all the data to my NAS over ethernet once the RAID array is setup. Since this is all happening over the network, I'm a bit worried about my data getting corrupted silently during transfer. From what I understand, data generally doesn't get corrupted without notice on local transfers because a checksum is performed at some point by the drive or the OS. (This could be totally wrong.) Does the same thing happen with SMB, or is it up to the transferrer to check the integrity of their data? And if it doesn't happen with SMB, is there a protocol that does ensure data integrity? I know that rsync can checksum a transfer, but I'm on Windows and I already have a robocopy configuration that I like. Will my data be safe or do I have to use an external checksum tool to make sure?

  Read the article

• Freezes (not crashes) with GCD, blocks and Core Data

  - by Lukasz

  I have recently rewritten my Core Data driven database controller to use Grand Central Dispatch to manage fetching and importing in the background. Controller can operate on 2 NSManagedContext's: NSManagedObjectContext *mainMoc instance variable for main thread. this contexts is used only by quick access for UI by main thread or by dipatch_get_main_queue() global queue. NSManagedObjectContext *bgMoc for background tasks (importing and fetching data for NSFetchedresultsController for tables). This background tasks are fired ONLY by user defined queue: dispatch_queue_t bgQueue (instance variable in database controller object). Fetching data for tables is done in background to not block user UI when bigger or more complicated predicates are performed. Example fetching code for NSFetchedResultsController in my table view controllers: -(void)fetchData{ dispatch_async([CDdb db].bgQueue, ^{ NSError *error = nil; [[self.fetchedResultsController fetchRequest] setPredicate:self.predicate]; if (self.fetchedResultsController && ![self.fetchedResultsController performFetch:&error]) { NSSLog(@"Unresolved error in fetchData %@", error); } if (!initial_fetch_attampted)initial_fetch_attampted = YES; fetching = NO; dispatch_async(dispatch_get_main_queue(), ^{ [self.table reloadData]; [self.table scrollRectToVisible:CGRectMake(0, 0, 100, 20) animated:YES]; }); }); } // end of fetchData function bgMoc merges with mainMoc on save using NSManagedObjectContextDidSaveNotification: - (void)bgMocDidSave:(NSNotification *)saveNotification { // CDdb - bgMoc didsave - merging changes with main mainMoc dispatch_async(dispatch_get_main_queue(), ^{ [self.mainMoc mergeChangesFromContextDidSaveNotification:saveNotification]; // Extra notification for some other, potentially interested clients [[NSNotificationCenter defaultCenter] postNotificationName:DATABASE_SAVED_WITH_CHANGES object:saveNotification]; }); } - (void)mainMocDidSave:(NSNotification *)saveNotification { // CDdb - main mainMoc didSave - merging changes with bgMoc dispatch_async(self.bgQueue, ^{ [self.bgMoc mergeChangesFromContextDidSaveNotification:saveNotification]; }); } NSfetchedResultsController delegate has only one method implemented (for simplicity): - (void)controllerDidChangeContent:(NSFetchedResultsController *)controller { dispatch_async(dispatch_get_main_queue(), ^{ [self fetchData]; }); } This way I am trying to follow Apple recommendation for Core Data: 1 NSManagedObjectContext per thread. I know this pattern is not completely clean for at last 2 reasons: bgQueue not necessarily fires the same thread after suspension but since it is serial, it should not matter much (there is never 2 threads trying access bgMoc NSManagedObjectContext dedicated to it). Sometimes table view data source methods will ask NSFetchedResultsController for info from bgMoc (since fetch is done on bgQueue) like sections count, fetched objects in section count, etc.... Event with this flaws this approach works pretty well of the 95% of application running time until ... AND HERE GOES MY QUESTION: Sometimes, very randomly application freezes but not crashes. It does not response on any touch and the only way to get it back to live is to restart it completely (switching back to and from background does not help). No exception is thrown and nothing is printed to the console (I have Breakpoints set for all exception in Xcode). I have tried to debug it using Instruments (time profiles especially) to see if there is something hard going on on main thread but nothing is showing up. I am aware that GCD and Core Data are the main suspects here, but I have no idea how to track / debug this. Let me point out, that this also happens when I dispatch all the tasks to the queues asynchronously only (using dispatch_async everywhere). This makes me think it is not just standard deadlock. Is there any possibility or hints of how could I get more info what is going on? Some extra debug flags, Instruments magical tricks or build setting etc... Any suggestions on what could be the cause are very much appreciated as well as (or) pointers to how to implement background fetching for NSFetchedResultsController and background importing in better way.

  Read the article

• Tile Engine - Procedural generation, Data structures, Rendering methods - A lot of effort question!

  - by Trixmix

  Isometric Tile and GameObject rendering. To achive the desired looking game I need to take into consideration which tiles need to be drawn first and which last. What I used is a Object that is TileRenderQueue that you would give it a tile list and it will give you a queue on which ones to draw based on their Z coordinate, so that if the Z is higher then it needs to be drawn last. Now if you read above you would know that I want the location data to instead of being stored in the tile instance i want it to be that the index in the array is the location. and then maybe based on the array i could draw the tiles instead of taking a long time in for looping and ordering them by Z. This is the hardest part for me. It's hard for me to find a simple solution to the which one to draw when problem. Also there is the fact that if the X is larger than the gameobject where the X is larger needs to be drawn over the rest of the tiles and so on. Here is an example: All the parts work together to create an efficient engine so its important to me that you would answer all of the parts. I hope you will work on the answers hard just as much that I worked on this question! If there is any unclear part tell me so in the comments! Thanks for the help!

  Read the article

• NEW 2-Day Instructor Led Course on Oracle Data Mining Now Available!

  - by chberger

  A NEW 2-Day Instructor Led Course on Oracle Data Mining has been developed for customers and anyone wanting to learn more about data mining, predictive analytics and knowledge discovery inside the Oracle Database.  Course Objectives: Explain basic data mining concepts and describe the benefits of predictive analysis Understand primary data mining tasks, and describe the key steps of a data mining process Use the Oracle Data Miner to build,evaluate, and apply multiple data mining models Use Oracle Data Mining's predictions and insights to address many kinds of business problems, including: Predict individual behavior, Predict values, Find co-occurring events Learn how to deploy data mining results for real-time access by end-users Five reasons why you should attend this 2 day Oracle Data Mining Oracle University course. With Oracle Data Mining, a component of the Oracle Advanced Analytics Option, you will learn to gain insight and foresight to: Go beyond simple BI and dashboards about the past. This course will teach you about "data mining" and "predictive analytics", analytical techniques that can provide huge competitive advantage Take advantage of your data and investment in Oracle technology Leverage all the data in your data warehouse, customer data, service data, sales data, customer comments and other unstructured data, point of sale (POS) data, to build and deploy predictive models throughout the enterprise. Learn how to explore and understand your data and find patterns and relationships that were previously hidden Focus on solving strategic challenges to the business, for example, targeting "best customers" with the right offer, identifying product bundles, detecting anomalies and potential fraud, finding natural customer segments and gaining customer insight.

  Read the article

• How do I express subtle relationships in my data?

  - by Chuck H

  "A" is related to "B" and "C". How do I show that "B" and "C" might, by this context, be related as well? Example: Here are a few headlines about a recent Broadway play: 1 - David Mamet's Glengarry Glen Ross, Starring Al Pacino, Opens on Broadway 2 - Al Pacino in 'Glengarry Glen Ross': What did the critics think? 3 - Al Pacino earns lackluster reviews for Broadway turn 4 - Theater Review: Glengarry Glen Ross Is Selling Its Stars Hard 5 - Glengarry Glen Ross; Hey, Who Killed the Klieg Lights? Problem: Running a fuzzy-string match over these records will establish some relationships, but not others, even though a human reader could pick them out from context in much larger datasets. How do I find the relationship that suggests #3 is related to #4? Both of them can be easily connected to #1, but not to each other. Is there a (Googlable) name for this kind of data or structure? What kind of algorithm am I looking for? Goal: Given 1,000 headlines, a system that automatically suggests that these 5 items are all probably about the same thing. To be honest, it's been so long since I've programmed I'm at a loss how to properly articulate this problem. (I don't know what I don't know, if that makes sense). This is a personal project and I'm writing it in Python. Thanks in advance for any help, advice, and pointers!

  Read the article

• Hidden Gems: Accelerating Oracle Data Integrator with SOA, Groovy, SDK, and XML

  - by Alex Kotopoulis

  On the last day of Oracle OpenWorld, we had a final advanced session on getting the most out of Oracle Data Integrator through the use of various advanced techniques. The primary way to improve your ODI processes is to choose the optimal knowledge modules for your load and take advantage of the optimized tools of your database, such as OracleDataPump and similar mechanisms in other databases. Knowledge modules also allow you to customize tasks, allowing you to codify best practices that are consistently applied by all integration developers. ODI SDK is another very powerful means to automate and speed up your integration development process. This allows you to automate Life Cycle Management, code comparison, repetitive code generation and change of your integration projects. The SDK is easily accessible through Java or scripting languages such as Groovy and Jython. Finally, all Oracle Data Integration products provide services that can be integrated into a larger Service Oriented Architecture. This moved data integration from an isolated environment into an agile part of a larger business process environment. All Oracle data integration products can play a part in thisracle GoldenGate can integrate into business event streams by processing JMS queues or publishing new events based on database transactions. Oracle GoldenGate can integrate into business event streams by processing JMS queues or publishing new events based on database transactions. Oracle Data Integrator allows full control of its runtime sessions through web services, so that integration jobs can become part of business processes. Oracle Data Service Integrator provides a data virtualization layer over your distributed sources, allowing unified reading and updating for heterogeneous data without replicating and moving data. Oracle Enterprise Data Quality provides data quality services to cleanse and deduplicate your records through web services.

  Read the article

• What's the proper term for a function inverse to a constructor - to unwrap a value from a data type?

  - by Petr Pudlák

  Edit: I'm rephrasing the question a bit. Apparently I caused some confusion because I didn't realize that the term destructor is used in OOP for something quite different - it's a function invoked when an object is being destroyed. In functional programming we (try to) avoid mutable state so there is no such equivalent to it. (I added the proper tag to the question.) Instead, I've seen that the record field for unwrapping a value (especially for single-valued data types such as newtypes) is sometimes called destructor or perhaps deconstructor. For example, let's have (in Haskell): newtype Wrap = Wrap { unwrap :: Int } Here Wrap is the constructor and unwrap is what? The questions are: How do we call unwrap in functional programming? Deconstructor? Destructor? Or by some other term? And to clarify, is this/other terminology applicable to other functional languages, or is it used just in the Haskell? Perhaps also, is there any terminology for this in general, in non-functional languages? I've seen both terms, for example: ... Most often, one supplies smart constructors and destructors for these to ease working with them. ... at Haskell wiki, or ... The general theme here is to fuse constructor - deconstructor pairs like ... at Haskell wikibook (here it's probably meant in a bit more general sense), or newtype DList a = DL { unDL :: [a] -> [a] } The unDL function is our deconstructor, which removes the DL constructor. ... in The Real World Haskell.

  Read the article

• btrfs and missing free space

  - by easteregg

  I converted my ext4 partition to btrfs and deleted the save subvolume after doing so. Then I enabled the compression (lzo) of the filessystem in the fstab file and everything is correct so far. Then I forced the compression of all files using the defragmentation command with the parameter -c that the new compression is applied to all files. While doing so, I noticed that my ssd got completly filled up - before I had 6gigs of free space. No I got nothing left. easteregg@x201s:~$ btrfs fi df / Data: total=50.00GB, used=49.17GB System: total=32.00MB, used=4.00KB Metadata: total=24.50GB, used=9.86GB and easteregg@x201s:~$ df -ha Filesystem Size Used Avail Use% Mounted on /dev/sda1 75G 60G 852M 99% / So now. How can I regain my free space. I expected to gain more space because of the lzo compression. And now! The fs is correctly mounted. easteregg@x201s:~$ mount /dev/sda1 on / type btrfs (rw,noatime,ssd,compress=lzo) Any ideas how to fix this issue?

  Read the article

• How to optimize Core Data query for full text search

  - by dk

  Can I optimize a Core Data query when searching for matching words in a text? (This question also pertains to the wisdom of custom SQL versus Core Data on an iPhone.) I'm working on a new (iPhone) app that is a handheld reference tool for a scientific database. The main interface is a standard searchable table view and I want as-you-type response as the user types new words. Words matches must be prefixes of words in the text. The text is composed of 100,000s of words. In my prototype I coded SQL directly. I created a separate "words" table containing every word in the text fields of the main entity. I indexed words and performed searches along the lines of SELECT id, * FROM textTable JOIN (SELECT DISTINCT textTableId FROM words WHERE word BETWEEN 'foo' AND 'fooz' ) ON id=textTableId LIMIT 50 This runs very fast. Using an IN would probably work just as well, i.e. SELECT * FROM textTable WHERE id IN (SELECT textTableId FROM words WHERE word BETWEEN 'foo' AND 'fooz' ) LIMIT 50 The LIMIT is crucial and allows me to display results quickly. I notify the user that there are too many to display if the limit is reached. This is kludgy. I've spent the last several days pondering the advantages of moving to Core Data, but I worry about the lack of control in the schema, indexing, and querying for an important query. Theoretically an NSPredicate of textField MATCHES '.*\bfoo.*' would just work, but I'm sure it will be slow. This sort of text search seems so common that I wonder what is the usual attack? Would you create a words entity as I did above and use a predicate of "word BEGINSWITH 'foo'"? Will that work as fast as my prototype? Will Core Data automatically create the right indexes? I can't find any explicit means of advising the persistent store about indexes. I see some nice advantages of Core Data in my iPhone app. The faulting and other memory considerations allow for efficient database retrievals for tableview queries without setting arbitrary limits. The object graph management allows me to easily traverse entities without writing lots of SQL. Migration features will be nice in the future. On the other hand, in a limited resource environment (iPhone) I worry that an automatically generated database will be bloated with metadata, unnecessary inverse relationships, inefficient attribute datatypes, etc. Should I dive in or proceed with caution?

  Read the article

• Dynamic data-entry value store

  - by simendsjo

  I'm creating a data-entry application where users are allowed to create the entry schema. My first version of this just created a single table per entry schema with each entry spanning a single or multiple columns (for complex types) with the appropriate data type. This allowed for "fast" querying (on small datasets as I didn't index all columns) and simple synchronization where the data-entry was distributed on several databases. I'm not quite happy with this solution though; the only positive thing is the simplicity... I can only store a fixed number of columns. I need to create indexes on all columns. I need to recreate the table on schema changes. Some of my key design criterias are: Very fast querying (Using a simple domain specific query language) Writes doesn't have to be fast Many concurrent users Schemas will change often Schemas might contain many thousand columns The data-entries might be distributed and needs syncronization. Preferable MySQL and SQLite - Databases like DB2 and Oracle is out of the question. Using .Net/Mono I've been thinking of a couple of possible designs, but none of them seems like a good choice. Solution 1: Union like table containing a Type column and one nullable column per type. This avoids joins, but will definitly use a lot of space. Solution 2: Key/value store. All values are stored as string and converted when needed. Also use a lot of space, and of course, I hate having to convert everything to string. Solution 3: Use an xml database or store values as xml. Without any experience I would think this is quite slow (at least for the relational model unless there is some very good xpath support). I also would like to avoid an xml database as other parts of the application fits better as a relational model, and being able to join the data is helpful. I cannot help to think that someone has solved (some of) this already, but I'm unable to find anything. Not quite sure what to search for either... I know market research is doing something like this for their questionnaires, but there are few open source implementations, and the ones I've found doesn't quite fit the bill. PSPP has much of the logic I'm thinking of; primitive column types, many columns, many rows, fast querying and merging. Too bad it doesn't work against a database.. And of course... I don't need 99% of the provided functionality, but a lot of stuff not included. I'm not sure this is the right place to ask such a design related question, but I hope someone here has some tips, know of any existing work, or can point me to a better place to ask such a question. Thanks in advance!

  Read the article

• Error trapping for a missing data source in a Spring MVC / Spring JDBC web app [migrated]

  - by Geeb

  I have written a web app that uses Spring MVC libraries and Spring JDBC to connect to an Oracle DB. (I don't use any ORM type libraries as I create stored procedures on Oracle that do my stuff and I'm quite happy with that.) I use a connection pool to Oracle managed by the Tomcat container The app generally works absolutely fine by the way! BUT... I noticed the other day when I tried to set up the app on another Tomcat instance that I had forgotten to configure the connection pool and obviously the app could not get hold of an org.apache.commons.dbcp.BasicDataSource object, so it crashed. I define the pool params in the tomcat "context.conf" In my "web.xml" I have: <servlet> <servlet-name>appServlet</servlet-name> <servlet-class>org.springframework.web.servlet.DispatcherServlet</servlet-class> <init-param> <param-name>contextConfigLocation</param-name> <param-value>/WEB-INF/Spring/appServlet/servlet-context.xml</param-value> </init-param> <load-on-startup>1</load-on-startup> </servlet> <servlet-mapping> <servlet-name>appServlet</servlet-name> <!-- Map *everything* to appServlet --> <url-pattern>/</url-pattern> </servlet-mapping> <resource-ref> <description>Oracle Datasource example</description> <res-ref-name>jdbc/ora1</res-ref-name> <res-type>org.apache.commons.dbcp.BasicDataSource</res-type> <res-auth>Container</res-auth> </resource-ref> And I have a Spring "servlet-context.xml" where JNDI is used to map the data source object provided by the connection pool to a Spring bean with the ID of "dataSource": <jee:jndi-lookup id="dataSource" jndi-name="java:comp/env/jdbc/ora1" resource-ref="true" /> Here's the question: Where do I trap the case where the database cannot be accessed for whatever reason? I don't want the user to see a yard-and-a-half of Java stack trace in their browser, rather a nicer message that tells them there is a database problem etc. It seems that my app tries to configure the "dataSource" bean (in "servlet-context.xml") before any code has tested it can actually provide a dataSource object from the pool?! Maybe I'm not fully understanding exactly what is going on in these stages of the app firing up ... Thanks for any advice!

  Read the article

• Excel tables creation upon MySQL data import (new feature in MySQL for Excel 1.2.x)

  - by Javier Treviño

  In this blog post we are going to talk about one of the features included since MySQL for Excel 1.2.0, you can install the latest GA or maintenance version using the MySQL Installer or optionally you can download directly any GA or non-GA version from the MySQL Developer Zone. Remember how easy is to dump data from a MySQL table, view or stored procedure to an Excel worksheet? (If you don't you can check out this other post: How To - Guide to Importing Data from a MySQL Database to Excel using MySQL for Excel). In version 1.2.0 we introduced some advanced options for the Import MySQL Data operation regarding Excel tables. The Advanced Options dialog shown above is accessible from any Import Data dialog. When the Create an Excel table for the imported MySQL table data option is checked (which is by default), MySQL for Excel will create an Excel table (also known in Excel jargon as a ListObject) from the Excel range containing the imported MySQL data. This "little feature" enables the right-away usage of the Excel table in data analysis, like including it for summarization on a PivotTable, including a summarization row at the end of the table's data, sorting or filtering the table's data by clicking the drop-down button next to each column's header, among other actions. The Excel tables that are created automatically from imported MySQL data will have a name like [UserPrefix].<SchemaName>.<DbObjectName> for tables and views, and <Prefix>.<SchemaName>.<ProcedureName>.<ResultSetName> for stored procedures.  Notice the first piece of the name is an optional [UserPrefix], the prefix is only used if the Prefix Excel tables with the following text option is checked, notice that the suggested prefix is "MySQL" but it can be changed to whatever text is suitable for you. Excel tables must have a table style so they are easily identified. There are a lot of predefined Excel table styles, by default the MySqlDefault style is applied, which is the style you have seen applied to imported data for Edit Sessions, and which adds simple and elegant formatting to the table. If you wish to change it to any of the predefined Excel table style you can do it through the drop-down list on the Use style [[styles drop-down]] for the new Excel table option. Excel tables are the basic construction blocks for building data analysis or self-service Business Intelligence using other more advanced Excel tools like Power Pivot, Power View or Power Map. This feature empowers imported MySQL data to use it in more advanced ways.  We hope you give this and the other new features in the 1.2.x version family a try! Remember that your feedback is very important for us, so drop us a message and follow us: MySQL on Windows (this) Blog: https://blogs.oracle.com/MySqlOnWindows/ MySQL for Excel forum: http://forums.mysql.com/list.php?172 Facebook: http://www.facebook.com/mysql YouTube channel: https://www.youtube.com/user/MySQLChannel Cheers!

  Read the article

• How to recover data files from xampp-windows to xampp-linux after crash?

  - by David Buehler

  My Windows box died after I developed a database in xampp on it; fortunately I have a backup of the entire F:/TestWeb/Xampp partition. Unfortunately, I did not do an Export (nor dump) of the "Lws2" database before the crash. I have replaced the defunct machine with one running Mint7 (based on Ubuntu 9.04 "Jaunty Jackalope") and installed xampp-linux into the /opt partition, so the new xampp now runs fine in /opt/lampp, and says all the elements are secured by passwords (which I just assigned during this installation.) I assumed that Xamp-Windows installed in November would migrate easily to xampp-linux installed iin February -- a bad assumption. It apparently would have been simple if I had known enough to do an Export or a Dump before the crash, but.... The backup was done to a Network Attached Storage drive, which is formatted as "vfat" so the backup does not carry with it any valid ownership permissions from MySql on NTFS. I now see from my backup that the old data resided in \TestWeb\Xampp\Mysql\Data\Lws2\ and consists of 7 ".frm" files which define my tables. The actual data -- I suppose a ".sql" file or files -- has disappeared, and I am resigning myself to two days of retyping it. But I do not wish to do the table layouts all over again. So I copied Data tree to /opt/lampp/Data -- PhpMyAdmin does not see it. So I copied Lws2 tree to /opt/lampp/Lws2 -- PhpMyAdmin does not see it. So I copied Data tree to /opt/lampp/var/mysql/Data -- PhpMyAdmin does not see it. So I copied Lws2 tree to /opt/lampp/var/mysql/Lws2 -- PhpMyAdmin does not see it. So I adjusted all the permissions to stop saying owner "nobody" to owner "root" and gave full permissions to all groups and to all others, with permissions percolating down, in all 4 trees. You guessed it -- PhpMyAdmin does not see any database named Lws2, only its 4 default ones. I double-checked the permissions and rebooted Linux and repeated the tests. At some point in that process I did see PhpMyAdmin showing "lws2(7)" but when I clicked on it I saw a "no table found" message. I have not been able to recreate that experience. Apparently there are some setup files for MySql and for PhpMyAdmin which need to be set up by running a wizard or two or by editing the files directly. I grepped the TestWeb tree and found an old "ldir = "C:TestWeb\Xampp\MySql\" and a "DataDir = C:TestWeb\Xampp\MySql\" in a .php file and in a .bat file, but I cannot find the corresponding config file names on the /opt partition/ -- so it looks as if these wizards have not been run to create them. What config files files does Linux use to setup MySql config files for PhpMyAdmin? What wizards do I need to run to point the MySql engine and the PhpMyAdmin at the folder /opt/lampp/data/ with its lws2 folder inside it? Or which files do I need to edit, with a sample of what it normally says under Linux? Incidentally, I remember I converted from MyISAM with its .MYD and .MYI files to InnoDB after entering only a small amount of the data -- and I do not know what file types to look for -- perhaps my data is still there but under another guise or in another place? Is it something as simple as linux needing to see "/data/" instead of /Data? I will check that out while waiting for a response. If anyone can point me to documentation that discusses this level of detail -- I will read it avidly! In any case, thanks for any clarification you can give on this thorny problem. wizdum

  Read the article

• Ubuntu missing from the Grub menu

  - by varevarao

  Recently I've had some audio issues with Ubuntu (using precise), and in the process of trying to resolve that I ran a dist-upgrade. Everything went just fine, and the sound seemed good, until I rebooted my machine for the first time since the dist-upgrade. All I see now in the Grub menu at startup is memtest86+, another memtest variant, and Windows 7. It's not showing any of the linux kernels that Ubuntu is running on. I am attaching my bootinfoscript: Boot Info Script 0.61.full + Boot-Repair extra info [Boot-Info November 20th 2012] ============================= Boot Info Summary: =============================== => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos6)/boot/grub on this drive. sda1: __________________________________________________________________________ File system: vfat Boot sector type: Dell Utility: FAT16 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sda2: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sda3: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: sda4: __________________________________________________________________________ File system: Extended Partition Boot sector type: Unknown Boot sector info: sda5: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: According to the info in the boot sector, sda5 starts at sector 2048. Operating System: Boot files: sda6: __________________________________________________________________________ File system: ext4 Boot sector type: Grub2 (v1.99-2.00) Boot sector info: Grub2 (v1.99) is installed in the boot sector of sda6 and looks at sector 220046240 of the same hard drive for core.img. core.img is at this location and looks for (,msdos6)/boot/grub on this drive. Operating System: Ubuntu 12.04.1 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sda7: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 63 273,104 273,042 de Dell Utility /dev/sda2 * 274,432 19,406,847 19,132,416 7 NTFS / exFAT / HPFS /dev/sda3 19,406,848 218,274,364 198,867,517 7 NTFS / exFAT / HPFS /dev/sda4 218,275,838 625,139,711 406,863,874 f W95 Extended (LBA) /dev/sda5 328,630,272 625,139,711 296,509,440 7 NTFS / exFAT / HPFS /dev/sda6 218,275,840 324,030,463 105,754,624 83 Linux /dev/sda7 324,032,512 328,626,175 4,593,664 82 Linux swap / Solaris "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sda1 07DA-0512 vfat DellUtility /dev/sda2 8834146034145392 ntfs RECOVERY /dev/sda3 48E2189DE21890F4 ntfs OS /dev/sda5 BC2A44C02A447982 ntfs Varshneya /dev/sda6 34731459-4b0f-46ac-a9bf-cb360a2c947c ext4 /dev/sda7 dcb9ce9b-799a-4c65-b008-887b01775670 swap /dev/sr0 iso9660 Ubuntu 12.04.1 LTS i386 ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /rofs squashfs (ro,noatime) /dev/sda6 /mnt ext4 (rw) /dev/sr0 /cdrom iso9660 (ro,noatime) =========================== sda6/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 34731459-4b0f-46ac-a9bf-cb360a2c947c if loadfont /boot/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 34731459-4b0f-46ac-a9bf-cb360a2c947c set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 34731459-4b0f-46ac-a9bf-cb360a2c947c linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 34731459-4b0f-46ac-a9bf-cb360a2c947c linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sda2)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root 8834146034145392 chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sda6/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=34731459-4b0f-46ac-a9bf-cb360a2c947c / ext4 errors=remount-ro,user_xattr 0 1 # swap was on /dev/sda7 during installation UUID=dcb9ce9b-799a-4c65-b008-887b01775670 none swap sw 0 0 -------------------------------------------------------------------------------- =================== sda6: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) 104.851909637 = 112.583880704 boot/grub/core.img 1 121.191410065 = 130.128285696 boot/grub/grub.cfg 1 ======================== Unknown MBRs/Boot Sectors/etc: ======================== Unknown BootLoader on sda4 00000000 eb 0f 2a 5d f4 b7 75 f2 e9 56 12 b8 50 b4 79 ec |..*]..u..V..P.y.| 00000010 89 91 ca c3 16 40 31 d0 ae c4 53 3d c7 dd d7 98 |[email protected]=....| 00000020 bd a4 f2 a4 e8 ab fc ea 36 30 1b 34 cf 8a 28 30 |........60.4..(0| 00000030 43 95 6c 31 3e 76 93 58 84 37 99 c3 ae 3a 88 a3 |C.l1>v.X.7...:..| 00000040 c2 a6 36 2a f8 e0 e1 03 91 8d a1 50 cd ad b0 b5 |..6*.......P....| 00000050 ad 69 3a 49 63 1f 4a 33 97 6e 0c 71 bf 7d bd 35 |.i:Ic.J3.n.q.}.5| 00000060 86 c5 17 93 b4 9f e5 af e0 c4 6f f4 6f f9 4b dd |..........o.o.K.| 00000070 14 39 e2 9e b9 36 ca b1 56 5b d9 b1 66 2c 05 b2 |.9...6..V[..f,..| 00000080 5d 5b 99 c0 db e6 81 27 ab c2 e1 55 00 ac 0b 2c |][.....'...U...,| 00000090 24 d3 8e 54 b0 3d ab 58 e4 23 fc 3a 79 93 fb 5e |$..T.=.X.#.:y..^| 000000a0 94 5a 3a c2 16 4e 56 cb 1b 7f 7e b3 4c 38 ca 5b |.Z:..NV...~.L8.[| 000000b0 ca ab c1 2c 2a 64 e7 77 fe 2a ba ee 08 33 b5 9b |...,*d.w.*...3..| 000000c0 d0 c2 b4 a8 fc 73 4f 01 fd 03 61 75 eb 6d 1a 74 |.....sO...au.m.t| 000000d0 5f 79 31 7f ed e6 f5 99 21 36 16 ed 25 d9 6d 2b |_y1.....!6..%.m+| 000000e0 5f f4 42 b8 9d 01 89 10 fe df a4 98 e7 ab ab ea |_.B.............| 000000f0 1d 1c 44 e1 49 d9 19 c9 ab f5 41 eb 4a 32 c2 39 |..D.I.....A.J2.9| 00000100 87 57 f6 f6 f3 b5 4d 17 72 f2 b1 16 19 aa ec 24 |.W....M.r......$| 00000110 39 bd e3 b1 68 b3 b0 7f fa 2a 3a 2e 99 ed db 8a |9...h....*:.....| 00000120 f8 61 b4 ef 9d 7d 85 95 ed ad eb 9e 71 f4 27 d3 |.a...}......q.'.| 00000130 f3 04 8b 8a 69 98 02 72 df e1 f9 83 27 5b 01 4c |....i..r....'[.L| 00000140 d4 9a b9 3b db ca 1e 40 35 db 6f c1 52 c0 7f 27 |...;[email protected]..'| 00000150 8a 1d bc 34 89 24 b6 e3 fd ec a1 2a e5 9e d1 8f |...4.$.....*....| 00000160 77 e0 d5 52 c0 4c c4 38 38 3c 28 19 bf 20 f0 03 |w..R.L.88<(.. ..| 00000170 38 a4 b1 b5 ed 6a b8 f7 a9 7b 65 b1 7b 64 4a 33 |8....j...{e.{dJ3| 00000180 66 1a 60 29 38 1d 5b 52 40 31 de a5 0c 0f cc 6f |f.`)8.[[email protected]| 00000190 dd 31 6d 3d f0 2a 32 85 67 66 ca 4f 02 aa 0d 30 |.1m=.*2.gf.O...0| 000001a0 66 c9 b2 33 c2 4b 8a fa 3c 7b 52 02 00 88 8e cf |f..3.K..<{R.....| 000001b0 67 1e d4 20 49 1d 1a b8 71 ad c2 d4 37 9d 00 fe |g.. I...q...7...| 000001c0 ff ff 07 fe ff ff 02 e0 93 06 00 60 ac 11 00 fe |...........`....| 000001d0 ff ff 05 fe ff ff 01 00 00 00 01 b0 4d 06 00 00 |............M...| 000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 00000200 ADDITIONAL INFORMATION : =================== log of boot-repair 2012-11-24__09h45 =================== boot-repair version : 3.195~ppa2~precise boot-sav version : 3.195~ppa2~precise glade2script version : 3.2.2~ppa45~precise boot-sav-extra version : 3.195~ppa2~precise boot-repair is executed in live-session (Ubuntu 12.04.1 LTS, precise, Ubuntu, i686) CPU op-mode(s): 32-bit, 64-bit file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- =================== os-prober: /dev/sda2:Windows 7 (loader):Windows:chain /dev/sda6:Ubuntu 12.04.1 LTS (12.04):Ubuntu:linux =================== blkid: /dev/sda1: SEC_TYPE="msdos" LABEL="DellUtility" UUID="07DA-0512" TYPE="vfat" /dev/sda2: LABEL="RECOVERY" UUID="8834146034145392" TYPE="ntfs" /dev/sda3: LABEL="OS" UUID="48E2189DE21890F4" TYPE="ntfs" /dev/sda5: LABEL="Varshneya" UUID="BC2A44C02A447982" TYPE="ntfs" /dev/loop0: TYPE="squashfs" /dev/sda6: UUID="34731459-4b0f-46ac-a9bf-cb360a2c947c" TYPE="ext4" /dev/sda7: UUID="dcb9ce9b-799a-4c65-b008-887b01775670" TYPE="swap" /dev/sr0: LABEL="Ubuntu 12.04.1 LTS i386" TYPE="iso9660" 1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS. Windows not detected by os-prober on sda3. Warning: extended partition does not start at a cylinder boundary. DOS and Linux will interpret the contents differently. =================== /mnt/etc/default/grub : # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" =================== /mnt/etc/grub.d/ : drwxr-xr-x 2 root root 4096 Nov 22 16:15 grub.d total 56 -rwxr-xr-x 1 root root 6743 Sep 12 20:19 00_header -rwxr-xr-x 1 root root 5522 Sep 12 20:05 05_debian_theme -rwxr-xr-x 1 root root 7407 Sep 12 20:19 10_linux -rwxr-xr-x 1 root root 6335 Sep 12 20:19 20_linux_xen -rwxr-xr-x 1 root root 1588 Sep 24 2010 20_memtest86+ -rwxr-xr-x 1 root root 7603 Sep 12 20:19 30_os-prober -rwxr-xr-x 1 root root 214 Sep 12 20:19 40_custom -rwxr-xr-x 1 root root 95 Sep 12 20:19 41_custom -rw-r--r-- 1 root root 483 Sep 12 20:19 README =================== No kernel in /mnt/boot: grub memtest86+.bin memtest86+_multiboot.bin =================== UEFI/Legacy mode: This live-session is not EFI-compatible. SecureBoot maybe enabled. =================== PARTITIONS & DISKS: sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda1. sda2 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda2. sda3 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda3. sda5 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda5. sda6 : sda, not-sepboot, grubenv-ok grub2, grub-pc, update-grub, 64, no-kernel, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt. sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 63 sectors * 512 bytes =================== parted -l: Model: ATA ST9320423AS (scsi) Disk /dev/sda: 320GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 140MB 140MB primary fat16 diag 2 141MB 9936MB 9796MB primary ntfs boot 3 9936MB 112GB 102GB primary ntfs 4 112GB 320GB 208GB extended lba 6 112GB 166GB 54.1GB logical ext4 7 166GB 168GB 2352MB logical linux-swap(v1) 5 168GB 320GB 152GB logical ntfs Model: HL-DT-ST DVD+-RW GA31N (scsi) Disk /dev/sr0: 4700MB Sector size (logical/physical): 2048B/2048B Partition Table: msdos Number Start End Size Type File system Flags 1 131kB 2916MB 2916MB primary boot, hidden =================== parted -lm: BYT; /dev/sda:320GB:scsi:512:512:msdos:ATA ST9320423AS; 1:32.3kB:140MB:140MB:fat16::diag; 2:141MB:9936MB:9796MB:ntfs::boot; 3:9936MB:112GB:102GB:ntfs::; 4:112GB:320GB:208GB:::lba; 6:112GB:166GB:54.1GB:ext4::; 7:166GB:168GB:2352MB:linux-swap(v1)::; 5:168GB:320GB:152GB:ntfs::; BYT; /dev/sr0:4700MB:scsi:2048:2048:msdos:HL-DT-ST DVD+-RW GA31N; 1:131kB:2916MB:2916MB:::boot, hidden; =================== mount: /cow on / type overlayfs (rw) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) /dev/sr0 on /cdrom type iso9660 (ro,noatime) /dev/loop0 on /rofs type squashfs (ro,noatime) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) tmpfs on /tmp type tmpfs (rw,nosuid,nodev) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) gvfs-fuse-daemon on /home/ubuntu/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ubuntu) /dev/sda6 on /mnt type ext4 (rw) /dev on /mnt/dev type none (rw,bind) /proc on /mnt/proc type none (rw,bind) /sys on /mnt/sys type none (rw,bind) /usr on /mnt/usr type none (rw,bind) /dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw) /dev/sda2 on /mnt/boot-sav/sda2 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) /dev/sda3 on /mnt/boot-sav/sda3 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) /dev/sda5 on /mnt/boot-sav/sda5 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) =================== ls: /sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 sda5 sda6 sda7 size slaves stat subsystem trace uevent /sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent /dev (filtered): autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency disk dri dvd dvdrw ecryptfs fb0 fd full fuse fw0 hidraw0 hpet input kmsg log mapper mcelog mei mem net network_latency network_throughput null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sda5 sda6 sda7 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uinput urandom usbmon0 usbmon1 usbmon2 v4l vga_arbiter video0 zero ls /dev/mapper: control =================== df -Th: Filesystem Type Size Used Avail Use% Mounted on /cow overlayfs 1.9G 113M 1.8G 6% / udev devtmpfs 1.9G 12K 1.9G 1% /dev tmpfs tmpfs 777M 872K 776M 1% /run /dev/sr0 iso9660 696M 696M 0 100% /cdrom /dev/loop0 squashfs 667M 667M 0 100% /rofs tmpfs tmpfs 1.9G 20K 1.9G 1% /tmp none tmpfs 5.0M 0 5.0M 0% /run/lock none tmpfs 1.9G 176K 1.9G 1% /run/shm /dev/sda6 ext4 51G 27G 22G 56% /mnt /dev/sda1 vfat 134M 9.1M 125M 7% /mnt/boot-sav/sda1 /dev/sda2 fuseblk 9.2G 5.6G 3.6G 61% /mnt/boot-sav/sda2 /dev/sda3 fuseblk 95G 80G 16G 84% /mnt/boot-sav/sda3 /dev/sda5 fuseblk 142G 130G 12G 92% /mnt/boot-sav/sda5 =================== fdisk -l: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xb8000000 Device Boot Start End Blocks Id System /dev/sda1 63 273104 136521 de Dell Utility /dev/sda2 * 274432 19406847 9566208 7 HPFS/NTFS/exFAT /dev/sda3 19406848 218274364 99433758+ 7 HPFS/NTFS/exFAT /dev/sda4 218275838 625139711 203431937 f W95 Ext'd (LBA) /dev/sda5 328630272 625139711 148254720 7 HPFS/NTFS/exFAT /dev/sda6 218275840 324030463 52877312 83 Linux /dev/sda7 324032512 328626175 2296832 82 Linux swap / Solaris Partition table entries are not in disk order =================== Repair blockers 64bits detected. Please use this software in a 64bits session. (Please use Ubuntu-Secure-Remix-64bits (www.sourceforge.net/p/ubuntu-secured) which contains a 64bits-compatible version of this software.) This will enable this feature. =================== Final advice in case of recommended repair The boot files of [Ubuntu 12.04.1 LTS] are far from the start of the disk. Your BIOS may not detect them. You may want to retry after creating a /boot partition (EXT4, >200MB, start of the disk). This can be performed via tools such as gParted. Then select this partition via the [Separate /boot partition:] option of [Boot Repair]. (https://help.ubuntu.com/community/BootPartition) =================== Default settings Recommended-Repair This setting would reinstall the grub2 of sda6 into the MBR of sda, using the following options: kernel-purge Additional repair would be performed: unhide-bootmenu-10s fix-windows-boot =================== Settings chosen by the user Boot-Info This setting will not act on the MBR. No change has been performed on your computer. See you soon! pastebinit packages needed dpkg-preconfigure: unable to re-open stdin: No such file or directory pastebin.com ko (), using paste.ubuntu Please report this message to [email protected] Any help would be great, I'm really missing Ubuntu (hate being stuck in the Windows world).

  Read the article

• Storing game objects with generic object information

  - by Mick

  In a simple game object class, you might have something like this: public abstract class GameObject { protected String name; // other properties protected double x, y; public GameObject(String name, double x, double y) { // etc } // setters, getters } I was thinking, since a lot of game objects (ex. generic monsters) will share the same name, movement speed, attack power, etc, it would be better to have all that information shared between all monsters of the same type. So I decided to have an abstract class "ObjectData" to hold all this shared information. So whenever I create a generic monster, I would use the same pre-created "ObjectData" for it. Now the above class becomes more like this: public abstract class GameObject { protected ObjectData data; protected double x, y; public GameObject(ObjectData data, double x, double y) { // etc } // setters, getters public String getName() { return data.getName(); } } So to tailor this specifically for a Monster (could be done in a very similar way for Npcs, etc), I would add 2 classes. Monster which extends GameObject, and MonsterData which extends ObjectData. Now I'll have something like this: public class Monster extends GameObject { public Monster(MonsterData data, double x, double y) { super(data, x, y); } } This is where my design question comes in. Since MonsterData would hold data specific to a generic monster (and would vary with what say NpcData holds), what would be the best way to access this extra information in a system like this? At the moment, since the data variable is of type ObjectData, I'll have to cast data to MonsterData whenever I use it inside the Monster class. One solution I thought of is this, but this might be bad practice: public class Monster extends GameObject { private MonsterData data; // <- this part here public Monster(MonsterData data, double x, double y) { super(data, x, y); this.data = data; // <- this part here } } I've read that for one I should generically avoid overwriting the underlying classes variables. What do you guys think of this solution? Is it bad practice? Do you have any better solutions? Is the design in general bad? How should I redesign this if it is? Thanks in advanced for any replies, and sorry about the long question. Hopefully it all makes sense!

  Read the article

• Fraud and Anomaly Detection using Oracle Data Mining YouTube-like Video

  - by chberger

  I've created and recorded another YouTube-like presentation and "live" demos of Oracle Advanced Analytics Option, this time focusing on Fraud and Anomaly Detection using Oracle Data Mining.  [Note:  It is a large MP4 file that will open and play in place.  The sound quality is weak so you may need to turn up the volume.] Data is your most valuable asset. It represents the entire history of your organization and its interactions with your customers.  Predictive analytics leverages data to discover patterns, relationships and to help you even make informed predictions.   Oracle Data Mining (ODM) automatically discovers relationships hidden in data.  Predictive models and insights discovered with ODM address business problems such as:  predicting customer behavior, detecting fraud, analyzing market baskets, profiling and loyalty.  Oracle Data Mining, part of the Oracle Advanced Analytics (OAA) Option to the Oracle Database EE, embeds 12 high performance data mining algorithms in the SQL kernel of the Oracle Database. This eliminates data movement, delivers scalability and maintains security.  But, how do you find these very important needles or possibly fraudulent transactions and huge haystacks of data? Oracle Data Mining’s 1 Class Support Vector Machine algorithm is specifically designed to identify rare or anomalous records.  Oracle Data Mining's 1-Class SVM anomaly detection algorithm trains on what it believes to be considered “normal” records, build a descriptive and predictive model which can then be used to flags records that, on a multi-dimensional basis, appear to not fit in--or be different.  Combined with clustering techniques to sort transactions into more homogeneous sub-populations for more focused anomaly detection analysis and Oracle Business Intelligence, Enterprise Applications and/or real-time environments to "deploy" fraud detection, Oracle Data Mining delivers a powerful advanced analytical platform for solving important problems.  With OAA/ODM you can find suspicious expense report submissions, flag non-compliant tax submissions, fight fraud in healthcare claims and save huge amounts of money in fraudulent claims  and abuse.   This presentation and several brief demos will show Oracle Data Mining's fraud and anomaly detection capabilities.  

  Read the article

• How to best transfer large payloads of data using wsHttp with WCF with message security

  - by jpierson

  I have a case where I need to transfer large amounts of serialized object graphs (via NetDataContractSerializer) using WCF using wsHttp. I'm using message security and would like to continue to do so. Using this setup I would like to transfer serialized object graph which can sometimes approach around 300MB or so but when I try to do so I've started seeing a exception of type System.InsufficientMemoryException appear. After a little research it appears that by default in WCF that a result to a service call is contained within a single message by default which contains the serialized data and this data is buffered by default on the server until the whole message is completely written. Thus the memory exception is being caused by the fact that the server is running out of memory resources that it is allowed to allocate because that buffer is full. The two main recommendations that I've come across are to use streaming or chunking to solve this problem however it is not clear to me what that involves and whether either solution is possible with my current setup (wsHttp/NetDataContractSerializer/Message Security). So far I understand that to use streaming message security would not work because message encryption and decryption need to work on the whole set of data and not a partial message. Chunking however sounds like it might be possible however it is not clear to me how it would be done with the other constraints that I've listed. If anybody could offer some guidance on what solutions are available and how to go about implementing it I would greatly appreciate it. Related resources: Chunking Channel How to: Enable Streaming Large attachments over WCF Custom Message Encoder Another spotting of InsufficientMemoryException I'm also interested in any type of compression that could be done on this data but it looks like I would probably be best off doing this at the transport level once I can transition into .NET 4.0 so that the client will automatically support the gzip headers if I understand this properly.

  Read the article

• How to import data to SAP

  - by Mehmet AVSAR

  Hi, As a complete stranger in town of SAP, I want to transfer my own application's (mobile salesforce automation) data to SAP. My application has records of customers, stocks, inventory, invoices (and waybills), cheques, payments, collections, stock transfer data etc. I have an additional database which holds matchings of records. ie. A customer with ID 345 in my application has key 120-035-0223 in SAP. Every record, for sure, has to know it's counterpart, including parameters. After searching Google and SAP help site for a day, I covered that it's going to be a bit more pain than I expected. Especially SAP site does not give even a clue on it. Say I couldn't find. We transferred our data to some other ERP systems, some of which wanted XML files, some other exposed their APIs. My point is, is Sql Server's SSIS an option for me? I hope it is, so I can fight on my own territory. Since client requests would vary a lot, I count flexibility as most important criteria. Also, I want to transfer as much data as I could. Any help is appreciated. Regards,

  Read the article

• Trying to compile x264 and ffmpeg for iPhone - "missing required architecture arm in file"

  - by jtrim

  I'm trying to compile x264 for use in an iPhone application. I see there are instructions on how to compile ffmpeg for use on the platform here: http://lists.mplayerhq.hu/pipermail/ffmpeg-devel/2009-October/076618.html , but I can't seem to find anything this complete for compiling x264 on the iPhone. I've found this source tree: http://gitorious.org/x264-arm that seems to have support for the ARM platform. Here is my config line: ./configure --cross-prefix=/usr/bin/ --host=arm-apple-darwin10 --extra-cflags="-B /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.2.sdk/usr/lib/ -I /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.2.sdk/usr/lib/" ...and inside configure I'm using the gas-preprocessor script (first link above) as my assembler: gas-preprocessor.pl gcc When I start compiling, it chunks away for a little while, then it spits out these warnings and a huge list of undefined symbols: ld: warning: option -s is obsolete and being ignored ld: warning: -force_cpusubtype_ALL will become unsupported for ARM architectures ld: warning: in /usr/lib/crt1.o, missing required architecture arm in file ld: warning: in /usr/X11R6/lib/libX11.dylib, missing required architecture arm in file ld: warning: in /usr/lib/libm.dylib, missing required architecture arm in file ld: warning: in /usr/lib/libpthread.dylib, missing required architecture arm in file ld: warning: in /usr/lib/libgcc_s.1.dylib, missing required architecture arm in file ld: warning: in /usr/lib/libSystem.dylib, missing required architecture arm in file Undefined symbols: My guess would be that the problem has to do with the "missing required architecture arm in file" warning...any ideas?

  Read the article

• Image Wells, Core Data, and Sqlite files.

  - by Sway

  I've got a mac application that I've developed. I use it to create sqlite files that are bundled with my iphone app. The mac app uses Core Data and bindings and is working fine except for one "weird" issue. I use an NSImageView (or Image Well) to allow me to drag and drop jpg files. This is bound through to an optional binary attribute in my model class. For some reason when I drag and drop a 4k jpg file it onto the image well and save the sqlite file. The data saved to the binary column is over 15 times larger than it should be. Whereas if I use an application like SQLiteManager and add the image into the row in the database. The binary data is the correct (expected size). File 4k jpg Actual size: 2371. Persisted via Core Data size: 35810. Can anyone give me a suggestion as to why this might be happening? Do I need to set some setting in Interface Builder or write some custom code?

  Read the article

• Accessing data stored in another unit Delphi

  - by Hendriksen123

  In Unit2 of my program i have the following code: TValue = Record NewValue, OldValue, SavedValue : Double; end; TData = Class(TObject) Public EconomicGrowth : TValue; Inflation : TValue; Unemployment : TValue; CurrentAccountPosition : TValue; AggregateSupply : TValue; AggregateDemand : TValue; ADGovernmentSpending : TValue; ADConsumption : TValue; ADInvestment : TValue; ADNetExports : TValue; OverallTaxation : TValue; GovernmentSpending : TValue; InterestRates : TValue; IncomeTax : TValue; Benefits : TValue; TrainingEducationSpending : TValue; End; I then declare Data : TData in the Var. when i try to do the following however in Unit1: ShowMessage(FloatToStr(Unit2.Data.Inflation.SavedValue)); I get an EAccessViolation message. Is there any way to access the data stored in 'Data' from Unit1 without getting errors?

  Read the article

• How to show data in dataTable lable:data in jsf

  - by palakolanusrinu

  Hi How to display lable: data name: srinu in multiple rows using dataTable in jsf right now i'm getting like | lable | data| data srinu i want it in this formate lable: data name: srinu code which used is <h:dataTable id="fundInfo" value="#{clientFundInfo}" border="1" var="client" first="0" rows="5" rules="all"> <h:column> <h:outputText value="CLIENT:"/> <h:outputText value="#{client.clientName}"></h:outputText> </h:column> <h:column> <h:outputText value="FUND:"/> <h:outputText value="#{client.fundName}"></h:outputText> </h:column> <h:column> <h:outputText value="Employer Identification Number:"/> <h:outputText value="#{client.empIdentificationNum}"></h:outputText> </h:column> <h:column><h:outputText value="FISCAL YEAR ENDED:"/> <h:outputText value="#{client.fye}"></h:outputText> </h:column> <h:column><h:outputText value="Shares Outstanding"/> <h:outputText value="#{client.sharesOutstanding}"></h:outputText> </h:column> </h:dataTable>

  Read the article

• Data Binding to an object in C#

  - by Allen

  Objective-c/cocoa offers a form of binding where a control's properties (ie text in a textbox) can be bound to the property of an object. I am trying to duplicate this functionality in C# w/ .Net 3.5. I have created the following very simple class in the file MyClass.cs: class MyClass { private string myName; public string MyName { get { return myName; } set { myName = value; } } public MyClass() { myName = "Allen"; } } I also created a simple form with 1 textbox and 1 button. I init'd one instance of Myclass inside the form code and built the project. Using the DataSource Wizard in Vs2008, i selected to create a data source based on object, and selected the MyClass assembly. This created a datasource entity. I changed the databinding of the textbox to this datasource; however, the expected result (that the textbox's contents would be "allen") was not achieved. Further, putting text into the textbox is not updating the name property of the object. I know i'm missing something fundamental here. At some point i should have to tie my instance of the MyClass class that i initialized inside the form code to the textbox, but that hasn't occurred. Everything i've looked at online seems to gloss over using DataBinding with an object (or i'm missing the mark entirely), so any help is great appreciated. ----Edit--- Utilizing what i learned by the answers, i looked at the code generated by Visual Studio, it had the following: this.myClassBindingSource.DataSource = typeof(BindingTest.MyClass); if i comment that out and substitute : this.myClassBindingSource.DataSource = new MyClass(); i get the expected behavior. Why is the default code generated by VS like it is? Assuming this is more correct than the method that works, how should i modify my code to work within the bounds of what VS generated?

  Read the article

• jquery slide to attribute with specific data attribute value

  - by Alex M

  Ok, so I have the following nav with absolute urls: <ul class="nav navbar-nav" id="main-menu"> <li class="first active"><a href="http://example.com/" title="Home">Home</a></li> <li><a href="http://example.com/about.html" title="About">About</a></li> <li><a href="http://example.com/portfolio.html" title="Portfolio">Portfolio</a></li> <li class="last"><a href="example.com/contact.html" title="Contact">Contact</a></li> </ul> and then articles with the following data attributes: <article class="row page" id="about" data-url="http://example.com/about.html"> <div class="one"> </div> <div class="two" </div> </article> and when you click the link in the menu I would like to ignore the fact it is a hyperlink and slide to the current article based on its attribute data-url. I started with what I think is the obvious: $('#main-menu li a').on('click', function(event) { event.preventDefault(); var pageUrl = $(this).attr('href'); )}; and have tried find and animate but then I don't know how to reference the article with data-url="http://example.com/about.html". Any help would be most appreciated. Thanks

  Read the article

< Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >