Search Results

Search found 4043 results on 162 pages for 'mod cluster'.

Page 42/162 | < Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >

• Passing IP address with mod_proxy

  - by Konrad Garus

  I have Apache with mod_proxy passing requests to Tomcat. The trouble is, when I get client IP address associated with a request in web app hosted on Tomcat, it always returns 127.0.0.1. Is it possible to have Apache pass the original IP address to Tomcat?

  Read the article

• How to change mod_rewrite to avoid {REQUEST_FILENAME} in order to get around 255 character URL limit?

  - by Jeremy Reimer

  According to this answer: max length of url 257 characters for mod_rewrite? there is a maximum 255 character hard limit based on the file system for using mod_rewrite. According to the accepted answer, there are two solutions: Change the URL format of your application to a max of 255 characters between each slash. Move the Rewrite rules into the apache virtual host config and remove the REQUEST_FILENAME. I cannot use the first method, so I am trying to figure out the second. I have put the Rewrite rules into the Apache virtual host config as requested. However I cannot figure out how to remove the REQUEST_FILENAME and still have my web application framework (Dragonfly) still work. Here is the portion of the rewrite rules that I moved from .htaccess into the virtual host config file of Apache: RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_FILENAME} !-l RewriteCond %{REQUEST_FILENAME} !-f [OR] # if don't want Dragonfly to process html files comment # out the line below (you may need to remove the [OR] above too). RewriteCond %{REQUEST_FILENAME} \.(html|nl)$ # Main URL rewriting. RewriteRule (.*) index.cgi?$1 [L,QSA] I've tried removing {REQUEST_FILENAME} and it just breaks the framework in various ways. How do I rewrite this without using {REQUEST_FILENAME}?

  Read the article

• OpenSSL response 404 issue on centOS 6

  - by dsp_099

  I followed this tutorial (though it's for 5.2, I figured I'd be alright). The changes I had to make that seemed to have worked: Rename ca.csr to ca.cslr (that's the one the command generated) List it in the ssl.conf as ca.cslr instead of ca.csr I have the following in the httpd.conf <VirtualHost *:80> DocumentRoot /etc/test ServerName site.com </VirtualHost> <VirtualHost *:433> SSLEngine on SSLCertificateFile /etc/pki/tls/certs/ca.crt SSLCertificateKeyFile /etc/pki/tls/private/ca.key <Directory /etc/test> AllowOverride All </Directory> DocumentRoot /etc/test ServerName cryptokings.com </VirtualHost> /test contains a folder inside of it, accessible via http://site.com/test/foo, however attempting to access it via https://site.com/test/foo results in warning that the certificate is untrusted (self-signed, no biggie) a 404 error. Chrome's complains about the certificate are the following: The identity of this website has not been verified. • Server's certificate does not match the URL. • Server's certificate is not trusted. I think those warnings are a side-effect of a self-signed certificate - or is the first one something that needs to be addressed? I seem to be able fetch the root page via https just fine though, it shows a standard CentOS setup page. (That said, I haven't added a VirtualHost entry for it so I suppose that makes sense) I think I've made a mistake somewhere during the setup as I'm not too familiar with the process. During setup, I was prompted for a type of password that would be required when apache restarts but running service httpd restart does not seem to prompt me for one. Any help would be appreciated.

  Read the article

• path problem with mod_rewrite, XDebug, PDT, XAMPP and Windows XP

  - by Delirium tremens

  My mod_rewrite turns accounts/create into index.php?folder=accounts&action=create, but pdt ignores it, so when I try to start a PHP Script debug session, I have to type a folder location in the file field and pdt doesn't accept. When PDT auto generates the URL for the PHP Web Page debug session, I go to http://localhost/myframe/index.php?XDEBUG%5FSESSION%5FSTART=ECLIPSE%5FDBGP&KEY=12569067976875, but myframe is in the frameworks folder, so I get a 404 error. When I check a breakpoint, uncheck Auto Generate, add frameworks before myframe in URL, set Start Debug from http://localhost/frameworks/myframe/accounts/create in Advanced and click Debug, the debugger doesn't stop at the breakpoint.

  Read the article

• nginx redirect to a subdomain even without trailing slashes

  - by Oliver A.

  Hi, I just installed and partially configured nginx on a dedicated server of mine. But I've got some trouble understanding the regexp. I would like to make nginx redirect www.mydomain.com/forum/ AND www.mydomain.com/forum (note the missing trailing slash; case-insensitive; same applies for "forums" instead of "forum") to forum.mydomain.com/. This is what I came up with: location ~* ^/(forum|forums) { rewrite ^/(.*)/(.*)$ http://forum.mydomain.com/$2? permanent; } ... but for some reason it works with trailing slashes only. :-/ Please help me! Thanks in advance!

  Read the article

• mod_rewrite to capture subdomain name

  - by Ricky

  I want to write a rewrite scheme such that: user1.example.net will redirect to example.net/user/user1 user2.example.net will redirect to example.net/user/user2 vise versa this is what i have in my .htaccess code. but it always redirects to example.net RewriteCond %{http_host} ^[^.]+.example.net [NC] RewriteRule ^([^.]+).example.net(.*) http://example.net/user/$1 [R=301,L] can someone please tell me what i did wrong? thank you.

  Read the article

• Configuring varnish and django (apache/modwsgi)

  - by Hedde

  I am trying to work out why my application keeps hitting the database while I have setup varnish infront of apache. I think I am missing some vital configuration, any tips are welcome This is my curl result: HTTP/1.1 200 OK Server: Apache/2.2.16 (Debian) Content-Language: en-us Vary: Accept,Accept-Encoding,Accept-Language,Cookie Cache-Control: s-maxage=60, no-transform, max-age=60 Content-Type: application/json; charset=utf-8 Date: Sat, 15 Sep 2012 08:19:17 GMT Connection: keep-alive My varnishlog: 13 BackendClose - apache 13 BackendOpen b apache 127.0.0.1 47665 127.0.0.1 8000 13 TxRequest b GET 13 TxURL b /api/v1/events/?format=json 13 TxProtocol b HTTP/1.1 13 TxHeader b User-Agent: curl/7.19.7 (universal-apple-darwin10.0) libcurl/7.19.7 OpenSSL/0.9.8r zlib/1.2.3 13 TxHeader b Host: foobar.com 13 TxHeader b Accept: */* 13 TxHeader b X-Forwarded-For: 92.64.200.145 13 TxHeader b X-Varnish: 979305817 13 TxHeader b Accept-Encoding: gzip 13 RxProtocol b HTTP/1.1 13 RxStatus b 200 13 RxResponse b OK 13 RxHeader b Date: Sat, 15 Sep 2012 08:21:28 GMT 13 RxHeader b Server: Apache/2.2.16 (Debian) 13 RxHeader b Content-Language: en-us 13 RxHeader b Content-Encoding: gzip 13 RxHeader b Vary: Accept,Accept-Encoding,Accept-Language,Cookie 13 RxHeader b Cache-Control: s-maxage=60, no-transform, max-age=60 13 RxHeader b Content-Length: 6399 13 RxHeader b Content-Type: application/json; charset=utf-8 13 Fetch_Body b 4(length) cls 0 mklen 1 13 Length b 6399 13 BackendReuse b apache 11 SessionOpen c 92.64.200.145 53236 :80 11 ReqStart c 92.64.200.145 53236 979305817 11 RxRequest c HEAD 11 RxURL c /api/v1/events/?format=json 11 RxProtocol c HTTP/1.1 11 RxHeader c User-Agent: curl/7.19.7 (universal-apple-darwin10.0) libcurl/7.19.7 OpenSSL/0.9.8r zlib/1.2.3 11 RxHeader c Host: foobar.com 11 RxHeader c Accept: */* 11 VCL_call c recv lookup 11 VCL_call c hash 11 Hash c /api/v1/events/?format=json 11 Hash c foobar.com 11 VCL_return c hash 11 VCL_call c miss fetch 11 Backend c 13 apache apache 11 TTL c 979305817 RFC 60 -1 -1 1347697289 0 1347697288 0 60 11 VCL_call c fetch deliver 11 ObjProtocol c HTTP/1.1 11 ObjResponse c OK 11 ObjHeader c Date: Sat, 15 Sep 2012 08:21:28 GMT 11 ObjHeader c Server: Apache/2.2.16 (Debian) 11 ObjHeader c Content-Language: en-us 11 ObjHeader c Content-Encoding: gzip 11 ObjHeader c Vary: Accept,Accept-Encoding,Accept-Language,Cookie 11 ObjHeader c Cache-Control: s-maxage=60, no-transform, max-age=60 11 ObjHeader c Content-Type: application/json; charset=utf-8 11 Gzip c u F - 6399 69865 80 80 51128 11 VCL_call c deliver deliver 11 TxProtocol c HTTP/1.1 11 TxStatus c 200 11 TxResponse c OK 11 TxHeader c Server: Apache/2.2.16 (Debian) 11 TxHeader c Content-Language: en-us 11 TxHeader c Vary: Accept,Accept-Encoding,Accept-Language,Cookie 11 TxHeader c Cache-Control: s-maxage=60, no-transform, max-age=60 11 TxHeader c Content-Type: application/json; charset=utf-8 11 TxHeader c Date: Sat, 15 Sep 2012 08:21:29 GMT 11 TxHeader c Connection: keep-alive 11 Length c 0 11 ReqEnd c 979305817 1347697288.292612076 1347697289.456128597 0.000086784 1.163468122 0.000048399

  Read the article

• Apache mod_jk Setting for Tomcat - workers.properties

  - by sissonb

  I am trying to direct files with .jsp extensions to tomcat. Otherwise I want apache to serve the file directly (no tomcat). Currently I have a test.jsp which is supposed to create an HTML page with the current date in the body. Instead when I go to that .jsp I see the JK Status Manager. The mod_jk.logs only show, init_jk::mod_jk.c (3365): mod_jk/1.2.35 initialized. I have tomcat and apache setup on my server. Apache runs on 80 and tomcat runs on 8080. localhost:8080 show the tomcat welcome page. I downloaded tomcat-connectors-1.2.35-windows-i386-httpd-2.2.x and copied the mod_jk.so to C:\apache\modules. Then I added LoadModule jk_module modules/mod_jk.so to my httpd.conf. I restart apache and the module loads just fine. Next I downloaded the mod_jk source to get the workers.properties file. I copy workers.properties to C:\apache\confg. Then I added this user, workers.tomcat_home="C:/Program Files/Apache Software Foundation/Tomcat 7.0" workers.java_home="C:/Program Files/Java/jdk1.7.0_03" worker.list=ajp13 worker.ajp13.port=8080 worker.ajp13.host=localhost worker.ajp13.type=ajp13 worker.ajp13.socket_timeout=10 When I try to use the ajp13 user in my httpd.conf I get the following error in my mod_jk.log, [Wed Mar 28 13:08:51 2012] [2196:4100] [info] ajp_connection_tcp_get_message::jk_ajp_common.c (1258): (ajp13) can't receive the response header message from tomcat, network problems or tomcat (127.0.0.1:8080) is down (errno=60) [Wed Mar 28 13:08:51 2012] [2196:4100] [error] ajp_get_reply::jk_ajp_common.c (2117): (ajp13) Tomcat is down or refused connection. No response has been sent to the client (yet) [Wed Mar 28 13:08:51 2012] [2196:4100] [info] ajp_service::jk_ajp_common.c (2614): (ajp13) sending request to tomcat failed (recoverable), (attempt=1) Next I update my httpd.conf with, JkWorkersFile C:/apache/conf/workers.properties JkLogFile C:/apache/logs/mod_jk.log JkLogLevel info JkLogStampFormat "[%a %b %d %H:%M:%S %Y] " Also I added JkMount /*.jsp jk-status to my virtual host like this, <VirtualHost 192.168.5.250:80> JkMount /*.jsp jk-status #JkMount /*.jsp ajp13 ServerName bgsisson.com ServerAlias www.bgsisson.com DocumentRoot C:/www/resume </VirtualHost> I think i need to include a uriworkermap.properties file, but this is where I am getting stuck. I have put up a test .jsp at bgsisson.com/test.jsp It shows the JK Status Manager when I use JkMount /*.jsp jk-status and 502 Bad Gateway when I use JkMount /*.jsp ajp13 test.jsp <%-- use the 'taglib' directive to make the JSTL 1.0 core tags available; use the uri "http://java.sun.com/jsp/jstl/core" for JSTL 1.1 --%> <%@ taglib uri="http://java.sun.com/jstl/core" prefix="c" %> <%-- use the 'jsp:useBean' standard action to create the Date object; the object is set as an attribute in page scope --%> <jsp:useBean id="date" class="java.util.Date" /> <html> <head><title>First JSP</title></head> <body> <h2>Here is today's date</h2> <c:out value="${date}" /> </body> </html>

  Read the article

• .htaccess working on remote server but does not work on localhost. Getting 404 errors on localhost

  - by Afsheen Khosravian

  MY PROBLEM: When I visit localhost the site does not work. It shows some text from the site but it seems the server can not locate any other files. Here is a snippet of the errors from firebug: "NetworkError: 404 Not Found - localhost/css/popup.css" "NetworkError: 404 Not Found - localhost/css/style.css" "NetworkError: 404 Not Found - localhost/css/player.css" "NetworkError: 404 Not Found - localhost/css/ui-lightness/jquery-ui-1.8.11.custom.css" "NetworkError: 404 Not Found - localhost/js/jquery.js" It seems my server is looking for the files in the wrong places. For example, localhost/css/popup.css is actually located at localhost/app/webroot/css/popup.css. I have my site setup on a remote server with the same exact configurations and it works perfectly fine. I am just having this issue trying to run the site on my laptop at localhost. I edited my VirtualHosts file DocumentRoot and to /home/user/public_html/site.com/public/app/webroot/ and this reduces some errors but I feel that this is wrong and sort of hacking it since I didn't use these setting on my production server which works. The last note I want to make is that the website uses dynamic URLs. I dont know if that has anything to do with it. For example, on the production server the URLS are: site.com/#hello/12321. HERES WHAT I AM WORKING WITH: I have a LAMP server setup on my laptop which runs on Ubuntu 11.10. I have enabled mod_rewrite: sudo a2enmod rewrite Then I edited my Virtual Hosts file: <VirtualHost *:80> ServerName localhost DirectoryIndex index.php DocumentRoot /home/user/public_html/site.com/public <Directory /home/user/public_html/site.com/public/> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> </VirtualHost> Then I restarted apache. My website is using cakePHP. This is the directory structure of the website: "/home/user/public_html/site.com/public" contains: index.php app cake plugins vendors These are my .htaccess files: /home/user/public_html/site.com/public/app/.htaccess: <IfModule mod_rewrite.c> RewriteEngine on RewriteRule ^$ webroot/ [L] RewriteRule (.*) webroot/$1 [L] </IfModule> /home/user/public_html/site.com/public/app/webroot/.htaccess: <IfModule mod_rewrite.c> RewriteEngine On RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^(.*)$ index.php?url=$1 [QSA,L] </IfModule>

  Read the article

• Remote servlet by mod_jk ?

  - by marioosh.net

  I have remote servlet for example: h*tps://[ip_address]/servlet (h*tps://[ip_address]/ - Tomcat main page) that i need to configure on local Apache HTTPd server. My mod_jk configuration looks like below, but doesn't work. Something works, because when i type h*tps://localhost/console in a browser i get Tomcat error page "HTTP Status 404 - /console/". JkWorkersFile /etc/apache2/workers.properties JkLogFile /var/log/apache2/mod_jk.log JkLogLevel info JkMount /console/* ajp13 workers.properties: worker.ajp13.type=ajp13 worker.ajp13.host=[ip_address] worker.ajp13.port=8009 Remote Tomcat is configured good i think - listen on port 8009 and servlet h*tps://[ip_address]/servlet works too. <Connector port="8009" protocol="AJP/1.3" redirectPort="443" /> Anybody helps ?

  Read the article

• What Apache/PHP configurations do you know and how good are they?

  - by FractalizeR

  Hello. I wanted to ask you about PHP/Apache configuration methods you know, their pros and cons. I will start myself: ---------------- PHP as Apache module---------------- Pros: good speed since you don't need to start exe every time especially in mpm-worker mode. You can also use various PHP accelerators in this mode like APC or eAccelerator. Cons: if you are running apache in mpm-worker mode, you may face stability issues because every glitch in any php script will lead to unstability to the whole thread pool of that apache process. Also in this mode all scripts are executed on behalf of apache user. This is bad for security. mpm-worker configuration requires PHP compiled in thread-safe mode. At least CentOS and RedHat default repositories doesn't have thread-safe PHP version so on these OSes you need to compile at least PHP yourself (there is a way to activate worker mpm on Apache). The use of thread-safe PHP binaries is considered experimental and unstable. Plus, many PHP extensions does not support thread-safe mode or were not well-tested in thread-safe mode. ---------------- PHP as CGI ---------------- This seems to be the slowest default configuration which seems to be a "con" itself ;) ---------------- PHP as CGI via mod_suphp ---------------- Pros: suphp allows you to execute php scipts on behalf of the script file owner. This way you can securely separate different sites on the same machine. Also, suphp allows to use different php.ini files per virtual host. Cons: PHP in CGI mode means less performance. In this mode you can't use php accelerators like APC because each time new process is spawned to handle script rendering the cache of previous process useless. BTW, do you know the way to apply some accelerator in this config? I heard something about using shm for php bytecode cache. Also, you cannot configure PHP via .htaccess files in this mode. You will need to install PECL htscanner for this if you need to set various per-script options via .htaccess (php_value / php_flag directives) ---------------- PHP as CGI via suexec ---------------- This configuration looks the same as with suphp, but I heard, that it's slower and less safe. Almost same pros and cons apply. ---------------- PHP as FastCGI ---------------- Pros: FastCGI standard allows single php process to handle several scripts before php process is killed. This way you gain performance since no need to spin up new php process for each script. You can also use PHP accelerators in this configuration (see cons section for comment). Also, FCGI almost like suphp also allows php processes to be executed on behalf of some user. mod_fcgid seems to have the most complete fcgi support and flexibility for apache. Cons: The use of php accelerator in fastcgi mode will lead to high memory consumption because each PHP process will have his own bytecode cache (unless there is some accelerator that can use shared memory for bytecode cache. Is there such?). FastCGI is also a little bit complex to configure. You need to create various configuration files and make some configuration modifications. It seems, that fastcgi is the most stable, secure, fast and flexible PHP configuration, however, a bit difficult to be configured. But, may be, I missed something? Comments are welcome!

  Read the article

• apache2: ssl_error_rx_record_too_long when visiting port 80? help!

  - by John

  Hi, I have an Ubuntu 10 x64 server edition machine. I got a second IP and configured /etc/network/interfaces like so (actual IPs and gateways removed): [code] auto lo iface lo inet loopback iface eth0 inet dhcp auto eth0 auto eth0:0 iface eth0 inet static address [ my first IP ] netmask 255.255.255.0 gateway [ my first gateway ] iface eth0:0 inet static address [ my second IP ] netmask 255.255.255.0 gateway [ my second gateway ] [/code] /etc/apache2/ports.conf: [code] Listen 80 NameVirtualHost [ my first IP ]:80 NameVirtualHost [ my second IP ]:80 # If you add NameVirtualHost *:443 here, you will also have to change # the VirtualHost statement in /etc/apache2/sites-available/default-ssl # to # Server Name Indication for SSL named virtual hosts is currently not # supported by MSIE on Windows XP. Listen 443 NameVirtualHost [ my first IP - some site is running SSL successfully using it ]:443 Listen 443 [/code] /etc/apache2/sites-enabled/mysite.conf: [code] ServerName mysite.com Include /var/www/mysite.com/djangoproject/apache/django.conf [/conf] [/code] Then when visiting http[mysite].com:80 or http[mysite].com (:// removed because serverfault doesn't allow me to post hyperlinks), I get: [code] An error occurred during a connection to [mysite].com. SSL received a record that exceeded the maximum permissible length. (Error code: ssl_error_rx_record_too_long) [/code] My guess is that the configuration file is not being picked up, and apache is therefore looking for the default-ssl file, which is not in conf-enabled. If I were to configure that file properly, it seems I would successfully connect to whatever default directory is specified in the default-ssl file. But I want to connect to my website. Any ideas? Thanks in advance!

  Read the article

• Jboss unreachable/ slow behind apache with ajp

  - by Niels

  I have an linux server running with a JBoss Instance with apache2. Apache2 will use AJP connection to reverse proxy to JBoss. I found these messages in the apache error.log: [error] (70007)The timeout specified has expired: ajp_ilink_receive() can't receive header [error] ajp_read_header: ajp_ilink_receive failed [error] (120006)APR does not understand this error code: proxy: read response failed from 8.8.8.8:8009 (hostname) [error] (111)Connection refused: proxy: AJP: attempt to connect to 8.8.8.8:8009 (hostname) failed [error] ap_proxy_connect_backend disabling worker for (hostname) [error] proxy: AJP: failed to make connection to backend: hostname [error] proxy: AJP: disabled connection for (hostname)25 I googled around but I can't seem to find any related topics. There are people say this behavior can be caused by misconfigured apache vs jboss. Telling the max amount of connections apache allows are far greater then jboss, causing the apache connection to time out. But I know the app isn't used by thousands of simultaneous connections at the time not even hundreds of connections so I don't believe this could be a cause. Does anybody have an idea? Or could tell me how to debug this problem? I'm using these versions: Debian 4.3.5-4 64Bit Apache Version 2.2.16 JBOSS Version 4.2.3.GA Thanks

  Read the article

• Apache SSL Log Incomplete SSL Handshake

  - by Raymond Berg

  Scenario: We're running some experiments in our classroom around trusted connections and SSL, and I want to demonstrate the SSL handshake request on a man-in-the-middle attack. I have an Apache server with a self-signed cert. Everything works fine, but the logging seems incomplete as there is no way to get a list of SSL attempts. Once the client accepts the 'exception', I get normal access log messages for every request. However, I need to know what ssl request caused it to fail. Here are my log directives: LogLevel warn ErrorLog logs/ssl_error_log CustomLog logs/ssl_access_log combined #the combined is your average custom log My desire is a list of every SSL handshake attempted. What am I missing that could produce something like the following? (Obviously the exact words aren't needed, but in the ballpark) 0/0/0 00:00:00 - 192.168.1.10 - hijk.lmnop.edu - SSL Mismatch

  Read the article

• Apache + mod_php Ignores SUID?

  - by profitphp

  Does apache or mod_php cause a SUID flag to be ignored when using the shell_exec command from a web accessed PHP script? I'm trying to allow a web accessible PHP script to rename some files which the apache user does not have write access to. I don't want to give it access to write these, as I only want one controlled script to be able to do this. I'm trying to avoid SUDO and the config needed or the headache/insecurity of using a que called from a privileged users cron, and it seemed like I should be able to use SUID to accomplish this. If you need more info, I've got a similar question open over here, but I think its too detailed and people are not seeing what I'm asking. http://stackoverflow.com/questions/6432931/suid-issues-with-php-apache

  Read the article

• Apache rewrite rules not causes a download dialog of the PHP file

  - by Shaihi

  I have Apache 2.2.17 using the WAMPServer 2.1 installation. I am debugging a website fully local on my computer. I have the following rule in the .htaccess: # Use PHP5 Single php.ini as default AddHandler application/x-httpd-php5s .php Options +FollowSymlinks RewriteEngine on Rewritebase / RewriteRule ^bella/(.*)/(.*)$ beauty.php?beauty_id=$1 [L] RewriteRule ^(argentina|brasil|chile|colombia|espana|mexico|rep_dominicana|uruguay|venezuela|peru|bolivia|cuba|ecuador|panama|paraguay|puerto_rico)/$ country.php?name=$1 [L] RewriteRule ^(argentina|brasil|chile|colombia|espana|mexico|rep_dominicana|uruguay|venezuela|peru|bolivia|cuba|ecuador|panama|paraguay|puerto_rico)/(hi5|facebook|twitter|orkut)/$ socialnetw.php?country=$1&category=$2 [L] The problem When I enable this rule and try to access http://localhost/index.php using FF I get a download dialog for the PHP file. If I comment the Rewrite* part in the .htaccess file then the index.php file loads fine, but navigation in the page is broken...

  Read the article

• ISPConfig 3 SSL automatic rewrite

  - by lol

  I was wondering how you could get apache2 to redirect http://server.com:8080 to https://server.com:8080 - I have an ISPConfig 3 setup and the http://server.com:8080 virtual host currently prints a 400 back request error given that I've tried adding RewriteEngine on RewriteCond %{HTTPS} !^on$ [NC] RewriteRule . https://%{HTTP_HOST}:8080%{REQUEST_URI} [L] to the ispconfig.vhost file (and reloading the conf) with no success --edit!-- I've been playing around with it and adding an 'always redirect to google' into the ispconfig vhost and it works once you've already started talking ssl to it. this means the non-ssl connections are getting 'bad request errors' before the vhost is loaded... but where...? --edit 2!-- nope, the ssl is handled exclusively by the virtual host - if I turn off the ssl engine then the rewriting works perfectly (but obviously there is no ssl at https://) thanks!

  Read the article

• Consistent PHP _SERVER variables between Apache and nginx?

  - by Alix Axel

  I'm not sure if this should be asked here or on ServerFault, but here it goes... I am trying to get started on nginx with PHP-FPM, but I noticed that the server block setup I currently have (gathered from several guides including the nginx Pitfalls wiki page) produces $_SERVER variables that are different from what I'm used to seeing in Apache setups. After spending the last evening trying to "fix" this, I decided to install Apache on my local computer and gather the variables that I'm interested in under different conditions so that I could try and mimic them on nginx. The Apache setup I've on my computer has only one mod_rewrite rule: RewriteEngine On RewriteCond %{SCRIPT_FILENAME} !-f RewriteCond %{SCRIPT_FILENAME} !-d RewriteRule ^(.*)$ /index.php/$1 [L] And these are the values I get for different request URIs (left is Apache, right is nginx): localhost/ - http://www.mergely.com/GnzBHRV1/ localhost/foo/bar/baz/?foo=bar - http://www.mergely.com/VwsT8oTf/ localhost/index.php/foo/bar/baz/?foo=bar - http://www.mergely.com/VGEFehfT/ What configuration directives would allow me to get similar values on requests handled by nginx? My current configuration in nginx is: server { listen 80; listen 443 ssl; server_name default; ssl_certificate /etc/nginx/certificates/dummy.crt; ssl_certificate_key /etc/nginx/certificates/dummy.key; root /var/www/default/html; index index.php index.html; autoindex on; location / { try_files $uri $uri/ /index.php; } location ~ /(?:favicon[.]ico|robots[.]txt)$ { log_not_found off; } location ~* [.]php { #try_files $uri =404; include fastcgi_params; fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index index.php; fastcgi_split_path_info ^(.+[.]php)(/.+)$; } location ~* [.]ht { deny all; } } And my fastcgi_params file looks like this: fastcgi_param PATH_INFO $fastcgi_path_info; fastcgi_param PATH_TRANSLATED $document_root$fastcgi_path_info; fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_param SCRIPT_NAME $fastcgi_script_name; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param REQUEST_URI $request_uri; fastcgi_param DOCUMENT_URI $document_uri; fastcgi_param DOCUMENT_ROOT $document_root; fastcgi_param SERVER_PROTOCOL $server_protocol; fastcgi_param GATEWAY_INTERFACE CGI/1.1; fastcgi_param SERVER_SOFTWARE nginx/$nginx_version; fastcgi_param REMOTE_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; fastcgi_param SERVER_ADDR $server_addr; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_NAME $server_name; fastcgi_param HTTPS $https; I know that the try_files $uri =404; directive is commented and that it is a security vulnerability but, if I uncomment it, the third request (localhost/index.php/foo/bar/baz/?foo=bar) will return a 404. It's also worth noting that my PHP cgi.fix_pathinfo in On (contrary to what some of the guides recommend), if I try to set it to Off, I'm presented with a "Access denied." message on every PHP request. I'm running PHP 5.4.8 and nginx/1.1.19. I don't know what else to try... Help?

  Read the article

• PHP: gethostbyname() suddenly no longer resolves names to IPs when run in Apache

  - by hurikhan77

  One of our older legacy servers which gets no further updates or reconfigurations suddenly stopped resolving hostnames to IPs when PHP is executed within Apache. However, it still works fine when executed from the CLI. From the RSS caches last modification time, I deduce that it stopped working on around Mar, 28th. To reproduce the problem, I created a script using fsockopen() and it said "connection failed (errno 2)". I further reduced the problem to being related with a failed name resolution: <?php $addr = gethostbyname("twitter.com"); echo "ADDR($addr)"; ?> When I run this through Apache, the output is ADDR(twitter.com), which is wrong. When I run this from the CLI, the output is ADDR(aaa.bbb.ccc.ddd) with varying IP addresses, as expected. Nothing on the server setup has changed. CLI and Apache module share the same php.ini. PHP is version v4.4.9 with Zend Optimizer v2.5.10. Apache is v1.3.31. I know the versions are old. But since nothing has been changed, a solution like "try to upgrade versions first" is no solution as the server's feature set/versioning is frozen and will be replaced soon. Still we need a solution. If I run dig through the script, it works in both environments (mod_php and CLI) but this is more than an ugly hack as it would involve many edits and testing throughout the whole script base which is also undesired as the PHP application on the server is frozen, too, and only receives security updates. It will be replaced by a complete rewrite (on the new server). But as the rewrite will take some time and successive replace parts of the legacy application, we need a fix for the resolver problem. I already googled a bit and while the problem is known, many did not find a fix. The fix to raise memory limits did not work. Restarts did not work. The resolver in mod_php just did stop working for no apparent reason. :-(

  Read the article

• mod_jk problem: Tomcat is probably not started or is listening on the wrong port

  - by Konrad

  Hi, I am running some application on Tomcat 6.0.26. There is Apache in front of web server talking to it over mod_jk. Every few hours when I try to access application browser simply spins, and no content is retrieved. No error is reported in Tomcat logs, but I fond such errors in mod_jk log: [Sun Jul 04 21:19:13 2010][error] ajp_service::jk_ajp_common.c (1758): Error connecting to tomcat. Tomcat is probably not started or is listening on the wrong port. worker=***** failed [Sun Jul 04 21:19:13 2010][info] jk_handler::mod_jk.c (1985): Service error=0 for worker==***** [Sun Jul 04 21:19:13 2010][info] ajp_connection_tcp_get_message::jk_ajp_common.c (955): Tomcat has forced a connection close for socket 46 [Sun Jul 04 21:19:13 2010][info] ajp_connection_tcp_get_message::jk_ajp_common.c (955): Tomcat has forced a connection close for socket 46 [Sun Jul 04 21:19:13 2010][info] ajp_connection_tcp_get_message::jk_ajp_common.c (955): Tomcat has forced a connection close for socket 46 [Sun Jul 04 21:19:13 2010][error] ajp_get_reply::jk_ajp_common.c (1503): Tomcat is down or refused connection. No response has been sent to the client (yet) [Sun Jul 04 21:19:13 2010][error] ajp_get_reply::jk_ajp_common.c (1503): Tomcat is down or refused connection. No response has been sent to the client (yet) [Sun Jul 04 21:19:13 2010][info] ajp_connection_tcp_get_message::jk_ajp_common.c (955): Tomcat has forced a connection close for socket 46 [Sun Jul 04 21:19:13 2010][error] ajp_get_reply::jk_ajp_common.c (1503): Tomcat is down or refused connection. No response has been sent to the client (yet) [Sun Jul 04 21:19:13 2010][info] ajp_connection_tcp_get_message::jk_ajp_common.c (955): Tomcat has forced a connection close for socket 45 [Sun Jul 04 21:19:13 2010][info] ajp_connection_tcp_get_message::jk_ajp_common.c (955): Tomcat has forced a connection close for socket 46 [Sun Jul 04 21:19:13 2010][info] ajp_service::jk_ajp_common.c (1721): Receiving from tomcat failed, recoverable operation attempt=0 my worker is configured in following way: worker.admanagonode.port=8009 worker.admanagonode.host=*****.com worker.admanagonode.type=ajp13 worker.admanagonode.ping_mode=A worker.admanagonode.socket_timeout=60 worker.admanagonode.prepost_timeout=10000 worker.admanagonode.connect_timeout=10000 worker.admanagonode.connection_pool_size=200 worker.admanagonode.connection_pool_timeout=300 worker.admanagonode.retries=20 worker.admanagonode.socket_keepalive=1 worker.admanagonode.cachesize=10 worker.admanagonode.cache_timeout=600 Tomcat has same port number in Connector configuration: <Connector port="8009" protocol="AJP/1.3" redirectPort="8443" address="*********" /> Does any of you has any ideas what i am missing? What can cause such problems? Cheers Konrad

  Read the article

• ssl between balancer members?

  - by jemminger

  I have apache running on one machine as a load balancer: <VirtualHost *:443> ServerName ssl.example.com DocumentRoot /home/example/public SSLEngine on SSLCertificateFile /etc/pki/tls/certs/example.crt SSLCertificateKeyFile /etc/pki/tls/private/example.key <Proxy balancer://myappcluster> BalancerMember http://app1.example.com:12345 route=app1 BalancerMember http://app2.example.com:12345 route=app2 </Proxy> ProxyPass / balancer://myappcluster/ stickysession=_myapp_session ProxyPassReverse / balancer://myappcluster/ </VirtualHost> Note that the balancer takes requests under SSL port 443, but then communicates to the balancer members on a non-ssl port. Is it possible to have the forwarding to the balancer members be under SSL too? If so, is this the best/recommended way? If so, do I have to have another SSL cert for each balancer member? Does the SSLProxyEngine directive have anything to do with this?

  Read the article

• Apache2 - mod_expire and mod_rewrite not working in httpd.conf - serving content from tomcat

  - by Ankit Agrawal

  I am using apache2 server running on debian which forwards all the http request to tomcat installed on same machine. I have two files under my /etc/apache2/ folder apache2.conf and httpd.conf I modified httpd.conf file to look like following. # forward all http request on port 80 to tomcat ProxyPass / ajp://127.0.0.1:8009/ ProxyPassReverse / ajp://127.0.0.1:8009/ # gzip text content AddOutputFilterByType DEFLATE text/plain AddOutputFilterByType DEFLATE text/html AddOutputFilterByType DEFLATE text/xml AddOutputFilterByType DEFLATE text/css AddOutputFilterByType DEFLATE text/javascript AddOutputFilterByType DEFLATE application/xml AddOutputFilterByType DEFLATE application/xhtml+xml AddOutputFilterByType DEFLATE application/rss+xml AddOutputFilterByType DEFLATE application/javascript AddOutputFilterByType DEFLATE application/x-javascript DeflateCompressionLevel 9 BrowserMatch ^Mozilla/4 gzip-only-text/html BrowserMatch ^Mozilla/4\.0[678] no-gzip BrowserMatch \bMSIE !no-gzip !gzip-only-text/html # Turn on Expires and mark all static content to expire in a week # unset last modified and ETag ExpiresActive On ExpiresDefault A0 <FilesMatch "\.(jpg|jpeg|png|gif|js|css|ico)$" ExpiresDefault A604800 Header unset Last-Modified Header unset ETag FileETag None Header append Cache-Control "max-age=604800, public" </FilesMatch RewriteEngine On # rewrite all www.example.com/content/XXX-01.js and YYY-01.css files to XXX.js and YYY.css RewriteRule ^content/(js|css)/([a-z]+)-([0-9]+)\.(js|css)$ /content/$1/$2.$4 # remove all query parameters from URL after we are done with it RewriteCond %{THE_REQUEST} ^GET\ /.*\;.*\ HTTP/ RewriteCond %{QUERY_STRING} !^$ RewriteRule .* http://example.com%{REQUEST_URI}? [R=301,L] # rewrite all www.example.com to example.com RewriteCond %{HTTP_HOST} ^www\.example\.com$ [NC] RewriteRule ^(.*)$ http://example.com/$1 [R=301,L] I want to achieve following. forward all traffic to tomcat GZIP all the text content. Put 1 week expiry header to all static files and unset ETag/last modified header. rewrite all js and css file to certain format. remove all the query parameters from URL forward all www.example.com to example.com The problem is only 1 and 2 are working. I tried a lot with many combinations but the expire and rewrite rule (3-6) do not work at all. I also tried moving these rules to apache2.conf and .htaccess files but it didn't work either. It does not give any error but these rules are simple ignored. expires and rewrite modules are ENABLED. Please let me know what should I do to fix this. 1. Do I need to add something else in httpd.conf file (like Options +FollowSymLink) or something else? 2. Do I need to add something in apache2.conf file? 3. Do I need to move these rules to .htaccess file? If yes, what should I write in that file and where should I keep that file? in /etc/apache2/ folder or /var/www/ folder? 4. Any other info to make this work? Thanks, Ankit

  Read the article

• mod_proxy security

  - by brad

  I'm on Debian Lenny using apache2. in my proxy.conf I tried adding Allow from localhost as suggested in some other forums to get proxying to work. Didn't work. It only worked if I say Allow from all My question is this. Are there any security implications to this Allow from all directive? Most people were saying to make this as limited as possible, but "all" is the client right? I want anyone regardless of their IP to be forwarded properly. Is there a better way to configure this?

  Read the article

• How do I redirect all requests to files in the root folder to point to another folder?

  - by purpletonic

  I've moved all of my files from the root of my website into a subfolder, I'd like to do an Apache redirect to point to the files without affecting the other subfolders in my site. E.g. /index.html -- redirect to -- /subfolder1/index.html /file1.html -- redirect to -- /subfolder1/index.html /subfolder2/index.html -- No redirect Can anyone help me with the redirect rule that I need to write for this. Thanks,

  Read the article

• Rewriting URLs from subdomain to domain in Apache

  - by Nazgulled

  Hi, My webserver is running Plesk and part of my site structure goes like this: / /httpdocs (domain root folder, URL: http://www.domain.com) /subdomains /subdomains/blog/httpdocs (blog root folder, URL: http://blog.domain.com) I have a WordPress installation in the domain root folder and WP is configured to display a static page when accessing www.domain.com and to display the blog when accessing www.domain.com/blog. However, I want to redirect (using mod_rewrite) all requests from http://blog.domain.com/ to http://www.domain.com/blog/. A few examples: Accessing http://blog.domain.com/archives should access http://www.domain.com/blog/archives/ Accessing http://blog.domain.com/tag/abc should access http://www.domain.com/blog/tag/abc/ Accessing http://blog.domain.com/some-post-title should access http://www.domain.com/blog/some-post-title All this should be transparent to the user, the address shouldn't be changed on the browser's address bar. In better words, I want a URL rewrite and not a URL redirect. Is this achievable with mod_rewrite? Can anyone help me with the .htaccess? All my attempts on doing so have failed...

  Read the article

< Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >