Search Results

Search found 2996 results on 120 pages for 'nathan friend'.

Page 42/120 | < Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >

  • Windows XP Installation problems

    - by Samurai Waffle
    I'm having trouble installing Windows XP on a computer... My friend gave me her old computer, it was riddled with viruses and ran extremely slow. I did my best to clean it out, and after a bit I discovered it had a boot sector virus. So I downloaded the Ultimate Boot CD (installed it on a flash drive), and ran Darik's nuke and boot to completely wipe the hard drive. I then tried to reinstall Windows XP from a USB drive... It doesn't work. The computer just stalls and never boots. The computers dvd drive doesn't work, so I borrowed a spare drive that another friend had, and tried to run a Windows XP cd. For a bit I got the stop 7B error, but now it just stalls like the USB drive does. Since then I've booted back into the Ultimate Boot CD, and ran partition magic. Repartitioned the Hard Drive, and copied the files on the Windows cd to the hard drive. I was wondering if there is any way I can make it run the setup.exe off the hard drive. I have the UBCD at my disposal, but have yet to come up with a way to do it. Any help is greatly appreciated.

    Read the article

  • Separate computers in my apartment can't communicate to each other?

    - by Razor Storm
    In my apartment, the management provides the building with a network connection. I have my computer plugged into the ethernet coming out of the walls, and my friend who also lives in the apartment building has his computer connected to a separate ethernet jack. As far as I know our two computers are not within a LAN, and ipconfig shows that we only have external ip addresses. The problem, then, appears when we attempt make direct communication between our computers. I have some hosting server set up on my machine, and my friend is unable to connect to it via my ip address. Other people who do not live in the apartment can connect fine. Ethernet adapter Local Area Connection: IPv4 Address. . . . . . . . . . . : 204.29.113.41 Subnet Mask . . . . . . . . . . . : 255.255.254.0 Default Gateway . . . . . . . . . : 204.29.112.1 His ip: 204.29.113.104 Using a fulltunnel vpn doesn't help.

    Read the article

  • Ubuntu 12.04 compiz - disable all compiz plugin - empty screen

    - by gotqn
    A lots of thanks to terdon who spent so many time on this and finally solve the issue. A friend of mine has installed on my new machine Ubuntu 12.04 (I have always been windows user and have no experience with Linux). I started to watch some tutorial about how to make 'Rotated Cube' using 'Compiz',but the cube appears in the form of a list (only two slides). I have thought this could be result of my video cards (only two - one from the processor and one from the motherboard) and they can not support this options. Anyway, I have decided to disable all compiz plugins and options because my friend has set some, and I started to think there is some misunderstanding between the plugins. After, that I got only empty screen(no menu, no icons, anything) and can do nothing. How to fix this? EDIT: When I remove the compiz stuffs (from the console), the menu is shown again. Then I install the compiz again (some of the effect are still not working). After restart or log out/in the menu is hidden again. I suppose that there are some settings that I've broken but they are saved somewhere in the system and remove the compiz do not deleted them and as a result they are activated after compiz is installed again and the PC is restarted?

    Read the article

  • Missing libcurl.so.3 on updating tp PHP 5.2.13

    - by exentric
    Hi, I am trying to update my PHP to 5.2.13 however when I tried running yum update, it gives me this dependency error. php-5.2.13-jason.1.i386 from utterramblings has depsolving problems --> Missing Dependency: libcurl.so.3 is needed by package php-5.2.13-jason.1.i386 (utterramblings) Error: Missing Dependency: libcurl.so.3 is needed by package php-cli-5.2.13-jason.1.i386 (utterramblings) Error: Missing Dependency: libcurl.so.3 is needed by package php-5.2.13-jason.1.i386 (utterramblings) I believe this problem has been caused by my updating libcurl some time ago (to version 7.16.4-8.el5) but I have no idea how to solve this dependency issue. Some time ago my friend asked me regarding missing libcurl.so.3 as well on running some script. Can't say I remember what but he did say he managed to solved it (at least on his end) so I paid no attention to the libcurl.so.3 issue anymore. But now when I try to update my PHP, this problem arises again. This however does indeed exist (and presumably what solved my friend's issue): /usr/lib/libcurl.so.3 Any thoughts on this matter? I'm using centOS 5.3, PHP 5.2.11 and on LightTPD. -Regards

    Read the article

  • hard drive recognized by bios but not by windows

    - by tehgeekmeister
    I'm adding a new hard drive (A seagate ST31000340NS; I had links in here but I don't have enough reputation to post them. Interestingly, the bios recognizes it as a ST31000340AS, but it was bought as the other number...) to a friend's hp pavilion d4650e (mobo specs; google the model if you want the rest of the info, can't do more than one link.). Have had a hell of a time with it. Finally figured out that the hard drive needed a jumper set to limit the speed to 1.5gbps so the mobo would recognize it, and the bios DOES recognize it now. But not windows (using windows 7), using add new hardware or diskmgmt.msc. According to my friend, who was at the computer when it first booted after adding the jumper, a new hardware found dealio popped up saying something about raid, but I can't provide more info then that since I didn't see it. Ubuntu livecd recognized the drive before we changed the jumper. Haven't checked since then. XP didn't recognize it, that's the OS we started with. Upgraded to 7 hoping it might fix the problem. The only other info I can think of that might be immediately relevant is that the drive is plugged into the fifth sata channel, and the first channel is empty. Is this a problem? I assume not, because the two other drives (in a raid 0) and the cd and dvd drives are also on channels past the first one, and are recognized. Ask questions and I'll update with info!

    Read the article

  • Send keystrokes simultaneously to both host and slave over internet?

    - by donodarazao
    I would like to watch movies with a friend who lives far away from me. For this, the playback should be synchronized on both our pc. However, we have some constraints: Due to our low bandwidth internet, any form of streaming solution wouldn't work. We do however both have the same copy of the movie on our harddisks. We use movies to learn languages and because of this, we very frequently pause and rewind. The typical "3...2...1...go!" solution over skype wouldn't work because it would soon get out of sync. I imagine an approach that sends keystrokes simultaneously to both our pc would work (for example, if I press space to pause the movie at my pc, space should also be send to his pc). Any ideas how this could be realized? I looked into Synergy and InputDirector, but both neither seem to be an option, because I don't want to see the desktop of my friend, I want to see my desktop Keystrokes should be sent simultaneously to both pc, not just to one pc We have both Windows 7x64, and we might use any media player (VLC, XBMC,...).

    Read the article

  • Setup Firefox to save .pages as .zip automatically

    - by Mike Dtrick
    What do I want to do? I would like Firefox to save files with the .pages extension as .zip files automatically. Scenario You are browsing through your emails and you notice your friend just sent you an email with a file attached (a .pages in this example). Unfortunately, you have a laptop that runs Windows. Your friend continues to send tons of emails with .pages files attached and you are tired of manually saving the files as a .zip file. Ultimately, you would like Firefox to be set up so that the download/file manager recognizes the .pages extension and automatically converts it to a .zip file. What have I done? I have saved files manually by selecting save as "All Files" and setting the extension to .zip. I've gone through Firefox and their documentation and have not found anything on how to complete this task. Why am I doing this? To save time (only a few seconds, not the main reason). I would like to setup a simple solution that "converts" a file automatically without having to recall steps on how to achieve the task manually (for clients who aren't exactly tech savvy). So that clients with Windows can access the files. IMPORTANT NOTE: I am not trying to save the web page, rather an Apple document equivalent to Microsoft Word. UPDATE: The really easy method would be to save one file, right click it, choose properties and open all .pages files up with WinRAR (or any other program that extracts files from a compressed folder). For the sake of learning, I am going to "neglect" this method and continue to do some research on Firefox add-ons. I would still like to have Firefox or the download manager to do the bulk of the work for converting the file.

    Read the article

  • how to block spam email using Microsoft Outlook 2011 (Mac)?

    - by tim8691
    I'm using Microsoft Outlook 2011 for Mac and I'm getting so much spam I'm not sure how to control it. In the past, I always applied "Block Sender" and "Mark as Junk" to any spam email messages I received. This doesn't seem to be enough nowadays. Then I've started using Tools Rules to create rules based on subject, but the same spammer keeps changing subject lines, so this isn't working. I've been tracking the IP addresses they also seem to be changing with each email. Is there any key information I can use in the email to apply a rule to successfully place these spam emails in the junk folder? I'm using a "Low" level of junk email protection. The next higher level, "high", says it may eliminate valid emails, so I prefer not to use this option. There's maybe one or two spammers sending me emails, but the volume is very high now. I'm getting a variation of the following facebook email spam: Hi, Here's some activity you have missed. No matter how far away you are from friends and family, we can help you stay connected. Other people have asked to be your friend. Accept this invitation to see your previous friend requests Some variations on the subject line they've used include: Account Info Change Account Sender Mail Pending ticket notification Pending ticket status Support Center Support med center Pending Notification Reminder: Pending Notification How do people address this? Can it be done within Outlook or is it better to get a third party commercial software to plug-in or otherwise manage it? If so, why would the third party be better than Outlook's internal tools (e.g. what does it look for in the incoming email that Outlook doesn't look at)?

    Read the article

  • XP/Intel wirelss only showing 'hpsetup' ad-hoc network that isn't there

    - by ewall
    Trying to help my friend with her work XP laptop, which recently stopped seeing any wireless SSIDs except the SSID 'hpsetup' (presumably from a wireless-enabled HP printer). Relevant information: The laptop is a Lenovo T500 (Centrino 2 chipset) with XP SP3. The network adapter is Intel WiFi Link 5300 AGN (built-in). The latest version (13.5) of the Intel drivers only are installed, not the Intel config software, so XP is using the Wireless Zero-Config manager. The wireless router is a NetGear WGR614 v7 with 802.11b/g. The SSID is broadcasting, and all the other laptops in the house can see and connect to it. On the laptop, I have tried repairing the network connection, disabling power management, turning off 802.11a & n radio, and more... but it didn't help. Some of the wireless settings are managed by Group Policy from her office (I get the "At least one of your changes was not applied successfully to your wireless configuration" message). It is enforced to connect to "Access point (infrastructure) networks only". The real kicker is that my laptop does not an SSID named 'hpsetup' here, but it can see several broadcasted SSIDs including the one we want, while my friend's laptop doesn't see any SSID except 'hpsetup'. Any suggestions?

    Read the article

  • Intell SSD + Win 7 after crash can not repair, can not re install

    - by Ori
    I have Lenovo w520, after i bought it i took away old hhd (no longer with me) and replaced it with intel ssd, it worked perfectly for 1 year or so, today my system fr0ze and after waiting for some time i didi hard reset - it wasn't able to boot anymore at all, i do not see any messages from windows ever, it only loads Intel boot utility that suggests to pick one of 3 devices to boot, it has my hdd there but nothing happens. /I dont have recovery tools from lenovo since i moved to another country, i got win 7 cd from a friend (came with his laptop) abd if in bios i have AHCI - it doesnt see my ssd, if compatible mode - it sees it but format not available, partition creation gives b\me 8007045 error. I tried diskpart, in compatible mode it sees my disk but doesnt do recover or clean all, also win 7 disk tools dont do anything if i try to do boot fix... I am ok with erasing it but i seem not to be able too, i jus tneed the machine to wpork asap, all my files are on external drives so i dont care about formatting. please help! I am given a very old machine by a friend so i am able to browse internet... it is under XP...

    Read the article

  • can't register a soft phone to asterisk11

    - by Tom
    I have a VM (on oracle vbox) running Fedora17. I've installed asterisk 11 on it from sources. I've followed the wiki for installation (https://wiki.asterisk.org/wiki/display/AST/Creating+SIP+Accounts) to the letter. The ip on the VM machine running fedora is 192.168.1.7 and I can ping it from the host machine (Ubuntu 12.04), which is at 192.168.1.2 I've tried registering with ekiga with the following settings: user: [email protected]. Password: verysecretpassword registar: 192.168.1.7 but I'm getting an error "transport fail". Also, while trying to register I'm logged in to the asterisk CLI with verbose level 3 and debug level 4 and nothing appears. some more relevant data: I've added the following code to the end of my sip.conf.sample file: [demo-alice] type=friend host=dynamic secret=verysecretpassword context=users deny=0.0.0.0/0 permit=192.168.1.0/255.255.255.0 [demo-bob] type=friend host=dynamic secret=othersecretpassword context=users deny=0.0.0.0/0 permit=192.168.1.0/255.255.255.0 After I changed the sip.conf.sample file, I've created a copy of it and named it sip.conf. then I logged in to the asterisk CLI and typed sip reload. Then I'm trying to register and ekiga client from my host machine at 192.168.1.2 but it doesn't work and nothing appears on the asterisk CLI while in verbose mode level 3. BTW, If there is missing information about my question, please don't close it. comment about what you need to know and I'll edit it in to the question. tnx.

    Read the article

  • USB Device Not Recognized (Mac)

    - by Nargis
    Fortunately, my Mac-pro also made one of my USB storage devices inoperable. My data loss in that USB device but such as another USB device and USB keyboard are unaffected. I have heard that my friend usually trigger this problem by having at least two devices plugged in - typically thumb drives/USB flash drives, and then once a second flash drive is plugged in that become unrecognized. I have only two USB ports and first I think port loose when I connect two USB devices. But later I found these hidden files (“.Spotlight-V100”, “.TemporaryItems”, “.Trashes”, and “._.Trashes”) are created by Mac OS. And before unrecognized that USB device I have deleted these files and my friend had also done the same action. Now I don’t want to test for next USB device to become unrecognized and I won’t deleted any hidden system file inside the flash drives. But I really want to know why these problems happened. Can I delete these hidden files when I only connect to virtual machine (Vista), because I used to delete all useless hidden files from USB flash drives? Any suggestions or thoughts to prevent this or alternative suggestions to fix the problem that take lossless would be much appreciated.

    Read the article

  • Un-do Windows disk convert HFS+

    - by BLAKE
    Last night, a friend asked my to give him a copy of a word document. He handed me an external hard drive and left. I plugged the hard drive into my file server running Windows Server 2003, opened disk management and clicked OK. (I know that in Windows 2003 you need to manually assign a drive letter to external drives.) I then looked at the drive in disk management and it said that it was unallocated space. I called my friend and he said that there was data on the drive, but he used it with his Mac Book. Aperantly when I clicked OK in disk management I converted the from HFS+ file system to something else. Is there any way to undo the disk convert? I immediately removed the drive, so there was no writing to it. Windows did not format the drive, it just converted it. Is the data still there? All the data recovery programs I have are for windows, can they read the Mac file system? I need to get the data back, what can I do?

    Read the article

  • iPhone 3G can't see any WiFi networks, ever

    - by torbengb
    I've got WiFi turned on in the settings, and ask before connect turned off. My iPhone 3G should see several WiFi networks, but it lists none. It also does not list my own network, which my computers see just fine. It has worked earlier but stopped working recently (possibly because of or at the same time of other trouble (which a restore solved)). The iPhone is not jailbroken. The SSID is not hidden, uses WPA2. It also finds no WiFi networks when I'm at a friend's house. His iPhone 2G sees several WiFi networks, including his own. When I use the manual entry method, specifying my home SSID and the proper WPA2 passkey, then click join, the iPhone says couldn't find that network. Same at my friend's place, with his SSID and passkey. I've just backed up my iPhone, then restored it, to see if refreshing the firmware would help. It didn't change anything. Is my iPhone broken? How can I fix this?

    Read the article

  • Un-do Windows disk convert HFS+

    - by BLAKE
    Last night, a friend asked my to give him a copy of a word document. He handed me an external hard drive and left. I plugged the hard drive into my file server running Windows Server 2003, opened disk management and clicked OK. (I know that in Windows 2003 you need to manually assign a drive letter to external drives.) I then looked at the drive in disk management and it said that it was unallocated space. I called my friend and he said that there was data on the drive, but he used it with his Mac Book. Aperantly when I clicked OK in disk management I converted the from HFS+ file system to something else. Is there any way to undo the disk convert? I immediately removed the drive, so there was no writing to it. Windows did not format the drive, it just converted it. Is the data still there? All the data recovery programs I have are for windows, can they read the Mac file system? I need to get the data back, what can I do?

    Read the article

  • How best to modernize the 2002-era J2EE app?

    - by user331465
    I have this friend.... I have this friend who works on a java ee application (j2ee) application started in the early 2000's. Currently they add a feature here and there, but have a large codebase. Over the years the team has shrunk by 70%. [Yes, the "i have this friend is". It's me, attempting to humorously inject teenage high-school counselor shame into the mix] Java, Vintage 2002 The application uses EJB 2.1, struts 1.x, DAO's etc with straight jdbc calls (mixture of stored procedures and prepared statements). No ORM. For caching they use a mixture of OpenSymphony OSCache and a home-grown cache layer. Over the last few years, they have spent effort to modernize the UI using ajax techniques and libraries. This largely involves javascript libaries (jquery, yui, etc). Client Side On the client side, the lack of upgrade path from struts1 to struts2 discouraged them from migrating to struts2. Other web frameworks became popular (wicket, spring , jsf). Struts2 was not the "clear winner". Migrating all the existing UI from Struts1 to Struts2/wicket/etc did not seem to present much marginal benefit at a very high cost. They did not want to have a patchwork of technologies-du-jour (subsystem X in Struts2, subsystem Y in Wicket, etc.) so developer write new features using Struts 1. Server Side On the server side, they looked into moving to ejb 3, but never had a big impetus. The developers are all comfortable with ejb-jar.xml, EJBHome, EJBRemote, that "ejb 2.1 as is" represented the path of least resistance. One big complaint about the ejb environment: programmers still pretend "ejb server runs in separate jvm than servlet engine". No app server (jboss/weblogic) has ever enforced this separation. The team has never deployed the ejb server on a separate box then the app server. The ear file contains multiple copies of the same jar file; one for the 'web layer' (foo.war/WEB-INF/lib) and one for the server side (foo.ear/). The app server only loads one jar. The duplications makes for ambiguity. Caching As for caching, they use several cache implementations: OpenSymphony cache and a homegrown cache. Jgroups provides clustering support Now What? The question: The team currently has spare cycles to to invest in modernizing the application? Where would the smart investor spend them? The main criteria: 1) productivity gains. Specifically reducing the time to develope new subsystems features and reduced maintenance. 2) performance/scalability. They do not care about fashion or techno-du-jour street cred. What do you all recommend? On the persistence side Switch everything (or new development only) to JPA/JPA2? Straight hibernate? Wait for Java EE 6? On the client/web-framework side: Migrate (some or all) to struts2? wicket? jsf/jsf2? As for caching: terracotta? ehcache? coherence? stick with what they have? how best to take advantage of the huge heap sizes that the 64-bit jvms offer? Thanks in advance.

    Read the article

  • Data Warehouse ETL slow - change primary key in dimension?

    - by Jubbles
    I have a working MySQL data warehouse that is organized as a star schema and I am using Talend Open Studio for Data Integration 5.1 to create the ETL process. I would like this process to run once per day. I have estimated that one of the dimension tables (dimUser) will have approximately 2 million records and 23 columns. I created a small test ETL process in Talend that worked, but given the amount of data that may need to be updated daily, the current performance will not cut it. It takes the ETL process four minutes to UPDATE or INSERT 100 records to dimUser. If I assumed a linear relationship between the count of records and the amount of time to UPDATE or INSERT, then there is no way the ETL can finish in 3-4 hours (my hope), let alone one day. Since I'm unfamiliar with Java, I wrote the ETL as a Python script and ran into the same problem. Although, I did discover that if I did only INSERT, the process went much faster. I am pretty sure that the bottleneck is caused by the UPDATE statements. The primary key in dimUser is an auto-increment integer. My friend suggested that I scrap this primary key and replace it with a multi-field primary key (in my case, 2-3 fields). Before I rip the test data out of my warehouse and change the schema, can anyone provide suggestions or guidelines related to the design of the data warehouse the ETL process how realistic it is to have an ETL process INSERT or UPDATE a few million records each day will my friend's suggestion significantly help If you need any further information, just let me know and I'll post it. UPDATE - additional information: mysql> describe dimUser; Field Type Null Key Default Extra user_key int(10) unsigned NO PRI NULL auto_increment id_A int(10) unsigned NO NULL id_B int(10) unsigned NO NULL field_4 tinyint(4) unsigned NO 0 field_5 varchar(50) YES NULL city varchar(50) YES NULL state varchar(2) YES NULL country varchar(50) YES NULL zip_code varchar(10) NO 99999 field_10 tinyint(1) NO 0 field_11 tinyint(1) NO 0 field_12 tinyint(1) NO 0 field_13 tinyint(1) NO 1 field_14 tinyint(1) NO 0 field_15 tinyint(1) NO 0 field_16 tinyint(1) NO 0 field_17 tinyint(1) NO 1 field_18 tinyint(1) NO 0 field_19 tinyint(1) NO 0 field_20 tinyint(1) NO 0 create_date datetime NO 2012-01-01 00:00:00 last_update datetime NO 2012-01-01 00:00:00 run_id int(10) unsigned NO 999 I used a surrogate key because I had read that it was good practice. Since, from a business perspective, I want to keep aware of potential fraudulent activity (say for 200 days a user is associated with state X and then the next day they are associated with state Y - they could have moved or their account could have been compromised), so that is why geographic data is kept. The field id_B may have a few distinct values of id_A associated with it, but I am interested in knowing distinct (id_A, id_B) tuples. In the context of this information, my friend suggested that something like (id_A, id_B, zip_code) be the primary key. For the large majority of daily ETL processes (80%), I only expect the following fields to be updated for existing records: field_10 - field_14, last_update, and run_id (this field is a foreign key to my etlLog table and is used for ETL auditing purposes).

    Read the article

  • Android Expandable List View Update

    - by Gaurav Arora
    I am implementing a chatting application, where I have made a service to listen all the presence changed. On the change of the presence I want to update the data and I am unable to update the data that is showing in the expandable list view. Please suggest me a means to do the same. public class UserMenuActivity extends ExpandableListActivity { private XMPPConnection connection; String name,availability,subscriptionStatus; TextView tv_Status; /** Variable Define here */ private String[] data = { "View my profile", "New Multiperson Chat", "New Broad Cast Message", "New Contact Category", "New Group", "Invite to CCM", "Search", "Expand All", "Settings", "Help", "Close" }; private String[] data_Contact = { "Rename Category","Move Contact to Category", "View my profile", "New Multiperson Chat", "New Broad Cast Message", "New Contact Category", "New Group", "Invite to CCM", "Search", "Expand All", "Settings", "Help", "Close" }; private String[] data_child_contact = { "Open chat", "Delete Contact","View my profile", "New Multiperson Chat", "New Broad Cast Message", "New Contact Category", "New Group", "Invite to CCM", "Search", "Expand All", "Settings", "Help", "Close" }; private String[] menuItem = { "Chats", "Contacts", "CGM Groups", "Pending","Request" }; private List<String> menuItemList = Arrays.asList(menuItem); private int commonGroupPosition = 0; private String etAlertVal; private DatabaseHelper dbHelper; private int categoryID, listPos; /** New Code here.. */ private ArrayList<String> groupNames; private ArrayList<ArrayList<ChildItems>> childs; private UserMenuAdapter adapter; private Object object; private String[] data2 = { "PIN Michelle", "IP Call" }; private ListView mlist2; private ImageButton mimBtnMenu; private LinearLayout mllpopmenu; private View popupView; private PopupWindow popupWindow; private AlertDialog.Builder alert; private EditText input; private TextView mtvUserName, mtvUserTagLine; private ExpandableListView mExpandableListView; public static List<CategoryDataClass> categoryList; private boolean menuType = false; private String childValContact=""; public static Context context; @Override public void onBackPressed() { if (mllpopmenu.getVisibility() == View.VISIBLE) { mllpopmenu.setVisibility(View.INVISIBLE); } else { if (CCMStaticVariable.CommonConnection.isConnected()) { CCMStaticVariable.CommonConnection.disconnect(); } super.onBackPressed(); } } @SuppressWarnings("unchecked") @Override public boolean onKeyDown(int keyCode, KeyEvent event) { if (keyCode == KeyEvent.KEYCODE_MENU) { if (mllpopmenu.getVisibility() == View.VISIBLE) { mllpopmenu.setVisibility(View.INVISIBLE); } else { if (commonGroupPosition >= 4 && menuType == true) { if(childValContact == ""){ mllpopmenu.setVisibility(View.VISIBLE); mlist2.setAdapter(new ArrayAdapter(UserMenuActivity.this, R.layout.listviewtext, R.id.tvMenuText, data_Contact)); }else{ mllpopmenu.setVisibility(View.VISIBLE); mlist2.setAdapter(new ArrayAdapter(UserMenuActivity.this, R.layout.listviewtext, R.id.tvMenuText, data_child_contact)); } } else if (commonGroupPosition == 0) { mllpopmenu.setVisibility(View.VISIBLE); mlist2.setAdapter(new ArrayAdapter(UserMenuActivity.this, R.layout.listviewtext, R.id.tvMenuText, data)); } } return true; } return super.onKeyDown(keyCode, event); } @Override public void onCreate(Bundle icicle) { super.onCreate(icicle); setContentView(R.layout.usermenulayout); dbHelper = new DatabaseHelper(UserMenuActivity.this); //this.context = context.getApplicationContext(); XMPPConn.getContactList(); connection = CCMStaticVariable.CommonConnection; Presence userPresence = new Presence(Presence.Type.available); userPresence.setPriority(24); userPresence.setMode(Presence.Mode.away); connection.sendPacket(userPresence); } @Override protected void onResume() { super.onResume(); Presence userPresence = new Presence(Presence.Type.available); userPresence.setPriority(24); userPresence.setMode(Presence.Mode.away); connection.sendPacket(userPresence); XMPPConn.getContactList(); setExpandableListView(); } public boolean onChildClick(ExpandableListView parent, View v, int groupPosition, int childPosition, long id) { if (groupPosition == 1 && childPosition == 0) { startActivity(new Intent(UserMenuActivity.this, InvitetoCCMActivity.class)); } else if (groupPosition == 1 && childPosition != 0) { Intent intent = new Intent(UserMenuActivity.this, UserChatActivity.class); intent.putExtra("userNameVal", XMPPConn.mfriendList.get(childPosition - 1).friendName); startActivity(intent); } else if (groupPosition == 2 && childPosition == 0) { startActivity(new Intent(UserMenuActivity.this, CreateGroupActivity.class)); } else if (groupPosition == 2 && childPosition != 0) { String GROUP_NAME = childs.get(groupPosition).get(childPosition) .getName().toString(); int end = GROUP_NAME.indexOf("("); CCMStaticVariable.groupName = GROUP_NAME.substring(0, end).trim(); startActivity(new Intent(UserMenuActivity.this, GroupsActivity.class)); } else if (groupPosition >= 4) { childValContact = childs.get(groupPosition).get(childPosition).getName().trim(); showToast("user==>"+childValContact, 0); } return false; } private void setExpandableListView() { /***###############GROUP ARRAY ############################*/ final ArrayList<String> groupNames = new ArrayList<String>(); groupNames.add("Chats (2)"); groupNames.add("Contacts (" + XMPPConn.mfriendList.size() + ")"); groupNames.add("CGM Groups (" + XMPPConn.mGroupList.size() + ")"); groupNames.add("Pending (1)"); XMPPConn.getGroup(); categoryList = dbHelper.getAllCategory(); /**Group From Sever*/ if (XMPPConn.mGroupList.size() > 0) { for (int g = 0; g < XMPPConn.mGroupList.size(); g++) { XMPPConn.getGroupContact(XMPPConn.mGroupList.get(g).groupName); groupNames.add(XMPPConn.mGroupList.get(g).groupName + "(" + XMPPConn.mGroupContactList.size()+ ")"); } } if(categoryList.size() > 0){ for (int cat = 0; cat < categoryList.size(); cat++) { groupNames.add(categoryList.get(cat).getCategoryName()+ "(0)"); } } this.groupNames = groupNames; /*** ###########CHILD ARRAY * #################*/ ArrayList<ArrayList<ChildItems>> childs = new ArrayList<ArrayList<ChildItems>>(); ArrayList<ChildItems> child = new ArrayList<ChildItems>(); child.add(new ChildItems("Alisha", "Hi",0)); child.add(new ChildItems("Michelle", "Good Morning",0)); childs.add(child); child = new ArrayList<ChildItems>(); child.add(new ChildItems("", "",0)); if (XMPPConn.mfriendList.size() > 0) { for (int n = 0; n < XMPPConn.mfriendList.size(); n++) { child.add(new ChildItems(XMPPConn.mfriendList.get(n).friendNickName, XMPPConn.mfriendList.get(n).friendStatus, XMPPConn.mfriendList.get(n).friendState)); } } childs.add(child); /************** CGM Group Child here *********************/ child = new ArrayList<ChildItems>(); child.add(new ChildItems("", "",0)); if (XMPPConn.mGroupList.size() > 0) { for (int grop = 0; grop < XMPPConn.mGroupList.size(); grop++) { child.add(new ChildItems( XMPPConn.mGroupList.get(grop).groupName + " (" + XMPPConn.mGroupList.get(grop).groupUserCount + ")", "",0)); } } childs.add(child); child = new ArrayList<ChildItems>(); child.add(new ChildItems("Shuchi", "Pending (Waiting for Authorization)",0)); childs.add(child); /************************ Group Contact List *************************/ if (XMPPConn.mGroupList.size() > 0) { for (int g = 0; g < XMPPConn.mGroupList.size(); g++) { /** Contact List */ XMPPConn.getGroupContact(XMPPConn.mGroupList.get(g).groupName); child = new ArrayList<ChildItems>(); for (int con = 0; con < XMPPConn.mGroupContactList.size(); con++) { child.add(new ChildItems( XMPPConn.mGroupContactList.get(con).friendName, XMPPConn.mGroupContactList.get(con).friendStatus,0)); } childs.add(child); } } if(categoryList.size() > 0){ for (int cat = 0; cat < categoryList.size(); cat++) { child = new ArrayList<ChildItems>(); child.add(new ChildItems("-none-", "",0)); childs.add(child); } } this.childs = childs; /** Set Adapter here */ adapter = new UserMenuAdapter(this, groupNames, childs); setListAdapter(adapter); object = this; mlist2 = (ListView) findViewById(R.id.list2); mimBtnMenu = (ImageButton) findViewById(R.id.imBtnMenu); mllpopmenu = (LinearLayout) findViewById(R.id.llpopmenu); mtvUserName = (TextView) findViewById(R.id.tvUserName); mtvUserTagLine = (TextView) findViewById(R.id.tvUserTagLine); //Set User name.. System.out.println("CCMStaticVariable.loginUserName===" + CCMStaticVariable.loginUserName); if (!CCMStaticVariable.loginUserName.equalsIgnoreCase("")) { mtvUserName.setText("" + CCMStaticVariable.loginUserName); } /** Expandable List set here.. */ mExpandableListView = (ExpandableListView) this .findViewById(android.R.id.list); mExpandableListView.setOnGroupClickListener(new OnGroupClickListener() { @Override public boolean onGroupClick(ExpandableListView parent, View v, int groupPosition, long id) { XMPPConn.getContactList(); if (parent.isGroupExpanded(groupPosition)) { commonGroupPosition = 0; }else{ commonGroupPosition = groupPosition; } String GROUP_NAME = groupNames.get(groupPosition); int end = groupNames.get(groupPosition).indexOf("("); String GROUP_NAME_VALUE = GROUP_NAME.substring(0, end).trim(); if (menuItemList.contains(GROUP_NAME_VALUE)) { menuType = false; CCMStaticVariable.groupCatName = GROUP_NAME_VALUE; } else { menuType = true; CCMStaticVariable.groupCatName = GROUP_NAME_VALUE; } long findCatId = dbHelper.getCategoryID(GROUP_NAME_VALUE); if (findCatId != 0) { categoryID = (int) findCatId; } childValContact=""; showToast("Clicked on==" + GROUP_NAME_VALUE, 0); return false; } }); /** Click on item */ mlist2.setOnItemClickListener(new OnItemClickListener() { @Override public void onItemClick(AdapterView<?> arg0, View arg1, int pos,long arg3) { if (commonGroupPosition >= 4) { if(childValContact == ""){ if (pos == 0) { showAlertEdit(CCMStaticVariable.groupCatName); } /** Move contact to catgory */ if (pos == 1) { startActivity(new Intent(UserMenuActivity.this,AddContactCategoryActivity.class)); } }else{ if(pos == 0){ Intent intent = new Intent(UserMenuActivity.this,UserChatActivity.class); intent.putExtra("userNameVal",childValContact); startActivity(intent); } if(pos == 1){ XMPPConn.removeEntry(childValContact); showToast("Contact deleted sucessfully", 0); Intent intent = new Intent(UserMenuActivity.this,UserMenuActivity.class); } } } else { /** MyProfile */ if (pos == 0) { startActivity(new Intent(UserMenuActivity.this, MyProfileActivity.class)); } /** New multiperson chat start */ if (pos == 1) { startActivity(new Intent(UserMenuActivity.this, NewMultipersonChatActivity.class)); } /** New Broadcast message */ if (pos == 2) { startActivity(new Intent(UserMenuActivity.this, NewBroadcastMessageActivity.class)); } /** Click on add category */ if (pos == 3) { showAlertAdd(); } if (pos == 4) { startActivity(new Intent(UserMenuActivity.this, CreateGroupActivity.class)); } if (pos == 5) { startActivity(new Intent(UserMenuActivity.this, InvitetoCCMActivity.class)); } if (pos == 6) { startActivity(new Intent(UserMenuActivity.this, SearchActivity.class)); } if (pos == 7) { onGroupExpand(2); for (int i = 0; i < groupNames.size(); i++) { mExpandableListView.expandGroup(i); } } /** Click on settings */ if (pos == 8) { startActivity(new Intent(UserMenuActivity.this, SettingsActivity.class)); } if (pos == 10) { System.exit(0); } if (pos == 14) { if (mllpopmenu.getVisibility() == View.VISIBLE) { mllpopmenu.setVisibility(View.INVISIBLE); if (popupWindow.isShowing()) { popupWindow.dismiss(); } } else { mllpopmenu.setVisibility(View.VISIBLE); mlist2.setAdapter(new ArrayAdapter( UserMenuActivity.this, R.layout.listviewtext, R.id.tvMenuText, data)); } } } } }); } /** Toast message display here.. */ private void showToast(String msg, int time) { Toast.makeText(this, msg, time).show(); } public String showSubscriptionStatus(String friend){ return friend; } } Service.class public class UpdaterService extends Service { private XMPPConnection connection; String Friend; String user = ""; @Override public IBinder onBind(Intent arg0) { // TODO Auto-generated method stub return null; } @Override public void onCreate() { // Toast.makeText(this, "My Service Created", Toast.LENGTH_LONG).show(); super.onCreate(); } @Override public void onDestroy() { // TODO Auto-generated method stub super.onDestroy(); } @Override public void onStart(Intent intent, int startId) { // TODO Auto-generated method stub showToast("My Service Started", 0); connection = getConnection(); if (connection.isConnected()) { final Roster roster = connection.getRoster(); RosterListener r1 = new RosterListener() { @Override public void presenceChanged(Presence presence) { // TODO Auto-generated method stub XMPPConn.getContactList(); } @Override public void entriesUpdated(Collection<String> arg0) { // TODO Auto-generated method stub //notification("entriesUpdated"); } @Override public void entriesDeleted(Collection<String> arg0) { // TODO Auto-generated method stub //notification("entriesDeleted"); } @Override public void entriesAdded(Collection<String> arg0) { // TODO Auto-generated method stub Iterator<String> it = arg0.iterator(); if (it.hasNext()) { user = it.next(); } RosterEntry entry = roster.getEntry(user); if(entry.getType().toString().equalsIgnoreCase("to")){ int index_of_Alpha = Friend.indexOf("@"); String subID = Friend.substring(0, index_of_Alpha); notification("Hi "+subID+" wants to add you"); } } }; if (roster != null) { roster.setSubscriptionMode(Roster.SubscriptionMode.manual); System.out.println("subscription going on"); roster.addRosterListener(r1); } } else { showToast("Connection lost-", 0); } } protected void showToast(String msg, int time) { Toast.makeText(this, msg, time).show(); } private XMPPConnection getConnection() { return CCMStaticVariable.CommonConnection; } /** Notification manager */ private void notification(CharSequence message) { String ns = Context.NOTIFICATION_SERVICE; NotificationManager mNotificationManager = (NotificationManager) getSystemService(ns); int icon = R.drawable.ic_launcher; CharSequence tickerText = message; long when = System.currentTimeMillis(); Notification notification = new Notification(icon, tickerText, when); Context context = getApplicationContext(); CharSequence contentTitle = "CCM"; CharSequence contentText = message; Intent notificationIntent = new Intent(this, ManageNotification.class); notificationIntent.putExtra("Subscriber_ID",user ); PendingIntent contentIntent = PendingIntent.getActivity(this, 0, notificationIntent, 0); notification.setLatestEventInfo(context, contentTitle, contentText, contentIntent); notification.flags |= Notification.FLAG_AUTO_CANCEL; final int HELLO_ID = 1; mNotificationManager.notify(HELLO_ID, notification); } } Here is my adapter class public class UserMenuAdapter extends BaseExpandableListAdapter { private ArrayList<String> groups; private ArrayList<ArrayList<ChildItems>> childs; private Context context; public LayoutInflater inflater; ImageView img_availabiliy; private static final int[] EMPTY_STATE_SET = {}; private static final int[] GROUP_EXPANDED_STATE_SET = {android.R.attr.state_expanded}; private static final int[][] GROUP_STATE_SETS = { EMPTY_STATE_SET, // 0 GROUP_EXPANDED_STATE_SET // 1 }; public UserMenuAdapter(Context context, ArrayList<String> groups, ArrayList<ArrayList<ChildItems>> childs) { this.context = context; this.groups = groups; this.childs = childs; inflater = LayoutInflater.from(context); } @Override public Object getChild(int groupPosition, int childPosition) { return childs.get(groupPosition).get(childPosition); } @Override public long getChildId(int groupPosition, int childPosition) { return (long) (groupPosition * 1024 + childPosition); } @Override public View getChildView(int groupPosition, int childPosition, boolean isLastChild, View convertView, ViewGroup parent) { View v = null; if (convertView != null) v = convertView; else v = inflater.inflate(R.layout.child_layout, parent, false); ChildItems ci = (ChildItems) getChild(groupPosition, childPosition); TextView tv = (TextView) v.findViewById(R.id.tvChild); tv.setText(ci.getName()); TextView tv2 = (TextView) v.findViewById(R.id.tvChild2); tv2.setText(ci.getDailyStatus()); img_availabiliy = (ImageView)v.findViewById(R.id.img_childlayout_AVAILABILITY); ImageView friendPics = (ImageView)v.findViewById(R.id.ivFriendPics); if(ci.getStatusState() == 1){ img_availabiliy.setImageResource(R.drawable.online); } else if(ci.getStatusState()==0){ img_availabiliy.setImageResource(R.drawable.offline); } else if (ci.getStatusState()==2) { img_availabiliy.setImageResource(R.drawable.away); } else if(ci.getStatusState()==3){ img_availabiliy.setImageResource(R.drawable.busy); } else{ img_availabiliy.setImageDrawable(null); } if((groupPosition == 1 && childPosition == 0)){ friendPics.setImageResource(R.drawable.inviteto_ccm); img_availabiliy.setVisibility(View.INVISIBLE); } else if(groupPosition == 2 && childPosition == 0){ friendPics.setImageResource(R.drawable.new_ccmgroup); img_availabiliy.setVisibility(View.VISIBLE); }else{ if(ci.getPicture()!= null){ Bitmap bitmap = BitmapFactory.decodeByteArray(ci.getPicture(), 0, ci.getPicture().length); bitmap = Bitmap.createScaledBitmap(bitmap, 50, 50, true); friendPics.setImageBitmap(bitmap); }else{ friendPics.setImageResource(R.drawable.avatar); } img_availabiliy.setVisibility(View.VISIBLE); } return v; } @Override public int getChildrenCount(int groupPosition) { return childs.get(groupPosition).size(); } @Override public Object getGroup(int groupPosition) { return groups.get(groupPosition); } @Override public int getGroupCount() { return groups.size(); } @Override public long getGroupId(int groupPosition) { return (long) (groupPosition * 1024); } @Override public View getGroupView(int groupPosition, boolean isExpanded, View convertView, ViewGroup parent) { View v = null; if (convertView != null) v = convertView; else v = inflater.inflate(R.layout.group_layout, parent, false); String gt = (String) getGroup(groupPosition); TextView tv2 = (TextView) v.findViewById(R.id.tvGroup); if (gt != null) tv2.setText(gt); /**Set Image on group layout, Max/min*/ View ind = v.findViewById( R.id.explist_indicator); View groupInd = v.findViewById( R.id.llgroup); if( ind != null ) { ImageView indicator = (ImageView)ind; if( getChildrenCount( groupPosition ) == 0 ) { indicator.setVisibility( View.INVISIBLE ); } else { indicator.setVisibility( View.VISIBLE ); int stateSetIndex = ( isExpanded ? 1 : 0) ; Drawable drawable = indicator.getDrawable(); drawable.setState(GROUP_STATE_SETS[stateSetIndex]); } } if( groupInd != null ) { RelativeLayout indicator2 = (RelativeLayout)groupInd; if( getChildrenCount( groupPosition ) == 0 ) { indicator2.setVisibility( View.INVISIBLE ); } else { indicator2.setVisibility( View.VISIBLE ); int stateSetIndex = ( isExpanded ? 1 : 0) ; Drawable drawable2 = indicator2.getBackground(); drawable2.setState(GROUP_STATE_SETS[stateSetIndex]); } } return v; } @Override public boolean hasStableIds() { return true; } @Override public boolean isChildSelectable(int groupPosition, int childPosition) { return true; } public void onGroupCollapsed(int groupPosition) { } public void onGroupExpanded(int groupPosition) { } } I just want to update my list in ON PRESENCE CHANGED method in the Service class.. Please suggest me a means to do the same.

    Read the article

  • C++ HW - defining classes - objects that have objects of other class problem in header file (out of

    - by kitfuntastik
    This is my first time with much of this code. With this instancepool.h file below I get errors saying I can't use vector (line 14) or have instance& as a return type (line 20). It seems it can't use the instance objects despite the fact that I have included them. #ifndef _INSTANCEPOOL_H #define _INSTANCEPOOL_H #include "instance.h" #include <iostream> #include <string> #include <vector> #include <stdlib.h> using namespace std; class InstancePool { private: unsigned instances;//total number of instance objects vector<instance> ipp;//the collection of instance objects, held in a vector public: InstancePool();//Default constructor. Creates an InstancePool object that contains no Instance objects InstancePool(const InstancePool& original);//Copy constructor. After copying, changes to original should not affect the copy that was created. ~InstancePool();//Destructor unsigned getNumberOfInstances() const;//Returns the number of Instance objects the the InstancePool contains. const instance& operator[](unsigned index) const; InstancePool& operator=(const InstancePool& right);//Overloading the assignment operator for InstancePool. friend istream& operator>>(istream& in, InstancePool& ip);//Overloading of the >> operator. friend ostream& operator<<(ostream& out, const InstancePool& ip);//Overloading of the << operator. }; #endif Here is the instance.h : #ifndef _INSTANCE_H #define _INSTANCE_H ///////////////////////////////#include "instancepool.h" #include <iostream> #include <string> #include <stdlib.h> using namespace std; class Instance { private: string filenamee; bool categoryy; unsigned featuress; unsigned* featureIDD; unsigned* frequencyy; string* featuree; public: Instance (unsigned features = 0);//default constructor unsigned getNumberOfFeatures() const; //Returns the number of the keywords that the calling Instance object can store. Instance(const Instance& original);//Copy constructor. After copying, changes to the original should not affect the copy that was created. ~Instance() { delete []featureIDD; delete []frequencyy; delete []featuree;}//Destructor. void setCategory(bool category){categoryy = category;}//Sets the category of the message. Spam messages are represented with true and and legit messages with false.//easy bool getCategory() const;//Returns the category of the message. void setFileName(const string& filename){filenamee = filename;}//Stores the name of the file (i.e. “spam/spamsga1.txt”, like in 1st assignment) in which the message was initially stored.//const string& trick? string getFileName() const;//Returns the name of the file in which the message was initially stored. void setFeature(unsigned i, const string& feature, unsigned featureID,unsigned frequency) {//i for array positions featuree[i] = feature; featureIDD[i] = featureID; frequencyy[i] = frequency; } string getFeature(unsigned i) const;//Returns the keyword which is located in the ith position.//const string unsigned getFeatureID(unsigned i) const;//Returns the code of the keyword which is located in the ith position. unsigned getFrequency(unsigned i) const;//Returns the frequency Instance& operator=(const Instance& right);//Overloading of the assignment operator for Instance. friend ostream& operator<<(ostream& out, const Instance& inst);//Overloading of the << operator for Instance. friend istream& operator>>(istream& in, Instance& inst);//Overloading of the >> operator for Instance. }; #endif Also, if it is helpful here is instance.cpp: // Here we implement the functions of the class apart from the inline ones #include "instance.h" #include <iostream> #include <string> #include <stdlib.h> using namespace std; Instance::Instance(unsigned features) { //Constructor that can be used as the default constructor. featuress = features; if (features == 0) return; featuree = new string[featuress]; // Dynamic memory allocation. featureIDD = new unsigned[featuress]; frequencyy = new unsigned[featuress]; return; } unsigned Instance::getNumberOfFeatures() const {//Returns the number of the keywords that the calling Instance object can store. return featuress;} Instance::Instance(const Instance& original) {//Copy constructor. filenamee = original.filenamee; categoryy = original.categoryy; featuress = original.featuress; featuree = new string[featuress]; for(unsigned i = 0; i < featuress; i++) { featuree[i] = original.featuree[i]; } featureIDD = new unsigned[featuress]; for(unsigned i = 0; i < featuress; i++) { featureIDD[i] = original.featureIDD[i]; } frequencyy = new unsigned[featuress]; for(unsigned i = 0; i < featuress; i++) { frequencyy[i] = original.frequencyy[i];} } bool Instance::getCategory() const { //Returns the category of the message. return categoryy;} string Instance::getFileName() const { //Returns the name of the file in which the message was initially stored. return filenamee;} string Instance::getFeature(unsigned i) const { //Returns the keyword which is located in the ith position.//const string return featuree[i];} unsigned Instance::getFeatureID(unsigned i) const { //Returns the code of the keyword which is located in the ith position. return featureIDD[i];} unsigned Instance::getFrequency(unsigned i) const { //Returns the frequency return frequencyy[i];} Instance& Instance::operator=(const Instance& right) { //Overloading of the assignment operator for Instance. if(this == &right) return *this; delete []featureIDD; delete []frequencyy; delete []featuree; filenamee = right.filenamee; categoryy = right.categoryy; featuress = right.featuress; featureIDD = new unsigned[featuress]; frequencyy = new unsigned[featuress]; featuree = new string[featuress]; for(unsigned i = 0; i < featuress; i++) { featureIDD[i] = right.featureIDD[i]; } for(unsigned i = 0; i < featuress; i++) { frequencyy[i] = right.frequencyy[i]; } for(unsigned i = 0; i < featuress; i++) { featuree[i] = right.featuree[i]; } return *this; } ostream& operator<<(ostream& out, const Instance& inst) {//Overloading of the << operator for Instance. out << endl << "<message file=" << '"' << inst.filenamee << '"' << " category="; if (inst.categoryy == 0) out << '"' << "legit" << '"'; else out << '"' << "spam" << '"'; out << " features=" << '"' << inst.featuress << '"' << ">" <<endl; for (int i = 0; i < inst.featuress; i++) { out << "<feature id=" << '"' << inst.featureIDD[i] << '"' << " freq=" << '"' << inst.frequencyy[i] << '"' << "> " << inst.featuree[i] << " </feature>"<< endl; } out << "</message>" << endl; return out; } istream& operator>>(istream& in, Instance& inst) { //Overloading of the >> operator for Instance. string word; string numbers = ""; string filenamee2 = ""; bool categoryy2 = 0; unsigned featuress2; string featuree2; unsigned featureIDD2; unsigned frequencyy2; unsigned i; unsigned y; while(in >> word) { if (word == "<message") {//if at beginning of message in >> word;//grab filename word for (y=6; word[y]!='"'; y++) {//pull out filename from between quotes filenamee2 += word[y];} in >> word;//grab category word if (word[10] == 's') categoryy2 = 1; in >> word;//grab features word for (y=10; word[y]!='"'; y++) { numbers += word[y];} featuress2 = atoi(numbers.c_str());//convert string of numbers to integer Instance tempp2(featuress2);//make a temporary Instance object to hold values read in tempp2.setFileName(filenamee2);//set temp object to filename read in tempp2.setCategory(categoryy2); for (i=0; i<featuress2; i++) {//loop reading in feature reports for message in >> word >> word >> word;//skip two words numbers = "";//reset numbers string for (int y=4; word[y]!='"'; y++) {//grab feature ID numbers += word[y];} featureIDD2 = atoi(numbers.c_str()); in >> word;// numbers = ""; for (int y=6; word[y]!='"'; y++) {//grab frequency numbers += word[y];} frequencyy2 = atoi(numbers.c_str()); in >> word;//grab actual feature string featuree2 = word; tempp2.setFeature(i, featuree2, featureIDD2, frequencyy2); }//all done reading in and setting features in >> word;//read in last part of message : </message> inst = tempp2;//set inst (reference) to tempp2 (tempp2 will be destroyed at end of function call) return in; } } } and instancepool.cpp: // Here we implement the functions of the class apart from the inline ones #include "instancepool.h" #include "instance.h" #include <iostream> #include <string> #include <vector> #include <stdlib.h> using namespace std; InstancePool::InstancePool()//Default constructor. Creates an InstancePool object that contains no Instance objects { instances = 0; ipp.clear(); } InstancePool::~InstancePool() { ipp.clear();} InstancePool::InstancePool(const InstancePool& original) {//Copy constructor. instances = original.instances; for (int i = 0; i<instances; i++) { ipp.push_back(original.ipp[i]); } } unsigned InstancePool::getNumberOfInstances() const {//Returns the number of Instance objects the the InstancePool contains. return instances;} const Instance& InstancePool::operator[](unsigned index) const {//Overloading of the [] operator for InstancePool. return ipp[index];} InstancePool& InstancePool::operator=(const InstancePool& right) {//Overloading the assignment operator for InstancePool. if(this == &right) return *this; ipp.clear(); instances = right.instances; for(unsigned i = 0; i < instances; i++) { ipp.push_back(right.ipp[i]); } return *this; } istream& operator>>(istream& in, InstancePool& ip) {//Overloading of the >> operator. ip.ipp.clear(); string word; string numbers; int total;//int to hold total number of messages in collection while(in >> word) { if (word == "<messagecollection"){ in >> word;//reads in total number of all messages for (int y=10; word[y]!='"'; y++){ numbers = ""; numbers += word[y]; } total = atoi(numbers.c_str()); for (int x = 0; x<total; x++) {//do loop for each message in collection in >> ip.ipp[x];//use instance friend function and [] operator to fill in values and create Instance objects and read them intot he vector } } } } ostream& operator<<(ostream& out, const InstancePool& ip) {//Overloading of the << operator. out << "<messagecollection messages=" << '"' << '>' << ip.instances << '"'<< endl << endl; for (int z=0; z<ip.instances; z++) { out << ip[z];} out << endl<<"</messagecollection>\n"; } This code is currently not writing to files correctly either at least, I'm sure it has many problems. I hope my posting of so much is not too much, and any help would be very much appreciated. Thanks!

    Read the article

  • How do I setup ASP.NET MVC 2 with MySQL?

    - by NovaJoe
    Okay, so I'm cheating and not actually a question, but instead making a flat-out post. I know that goes against the grain of Stack Overflow, but this is too valuable not to share. I'm assuming that you have Visual Studio Professional 2008 and access to an instance of MySQL server. This MAY work with VS2008 Web edition, but not at all sure. If you haven't, install MySQL Connector for .NET (6.2.2.0 at the time of this write-up) Optional: install MySQL GUI Tools If you haven't, install MVC 2 RTM, or better yet, use Microsoft's Web Platform Installer. Create an empty MySQL database. If you don't want to access your application with the MySQL root user account (insecure), create a user account and assign the appropriate privileges (outside the scope of this write-up). Create a new MVC 2 application in Visual Studio In the MVC 2 app, reference MySql.Web.dll. It will either be in your GAC, or in the folder that the MySQL Connector installer put it. Modify the connection strings portion of your web.config: <connectionStrings> <remove name="LocalMySqlServer"/> <add name="MySqlMembershipConnection" connectionString="Data Source=[MySql server host name];user id=[user];password=[password];database=[database name];" providerName="MySql.Data.MySqlClient"/> </connectionStrings> Modify the membership portion of your web.config: <membership defaultProvider="MySqlMembershipProvider"> <providers> <clear/> <add name="MySqlMembershipProvider" type="MySql.Web.Security.MySQLMembershipProvider, MySql.Web, Version=6.2.2.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d" connectionStringName="MySqlMembershipConnection" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="false" requiresUniqueEmail="true" passwordFormat="Hashed" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="6" minRequiredNonalphanumericCharacters="0" passwordAttemptWindow="10" applicationName="/" autogenerateschema="true"/> </providers> </membership> Modify the role manager portion of your web.config: <roleManager enabled="true" defaultProvider="MySqlRoleProvider"> <providers> <clear /> <add connectionStringName="MySqlMembershipConnection" applicationName="/" name="MySqlRoleProvider" type="MySql.Web.Security.MySQLRoleProvider, MySql.Web, Version=6.2.2.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d" autogenerateschema="true"/> </providers> </roleManager> Modify the profile portion of your web.config: <profile> <providers> <clear/> <add type="MySql.Web.Security.MySQLProfileProvider, MySql.Web, Version=6.2.2.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d" name="MySqlProfileProvider" applicationName="/" connectionStringName="MySqlMembershipConnection" autogenerateschema="true"/> </providers> </profile> At this point, you ought to be able to run the app and have the default ASP.NET MVC 2 home page come up in your browser. However, it may be a better idea to first run the ASP.NET Web configuration Tool (in Visual Studio top menus: Project - ASP.NET Configuration). Once the tool launches, check out each of the tabs; no errors = all good. The configuration tool Nathan Bridgewater's blog was essential to getting this working. Kudos, Nathan. Look for the "Configuration Tool" heading half way down the page. The public key token on the MySql.web.dll that I've posted here ought not change any time soon. But in case you suspect a bad token string from copying and pasting or whatever, just use the Visual Studio command line to run: "sn -T [Path\to\your.dll]" in order to get the correct public key token. There you have it, ASP.NET MVC 2 running over MySQL. Cheers!

    Read the article

  • http(/* argument here */) How is this Object (Http) being used without an explicit or implicit meth

    - by Randin
    In the example for coding with Json using Databinder Dispatch Nathan uses an Object (Http) without a method, shown here: import dispatch._ import Http._ Http("http://www.fox.com/dollhouse/" >>> System.out ) How is he doing this? Thank you for all of the answers unfortunatly I was not specific enough... It looks like it is simply passing an argument to a constructor of class or companion object Http. In another example, I've seen another form: http = new Http http(/* argument here */) Is this valid Scala? I guess it must be, because the author is a Scala expert. But it makes no sense to me. Actions are usually performed by invoking methods on objects, whether explicitly as object.doSomething() or implicitly as object = something (using the apply() method underneath the syntactic sugar). All I can think of is that a constructor is being used to do something in addition to constructing an object. In other words, it is having side effects, such as in this case going off and doing something on the web.

    Read the article

  • Store time of the day in SQL

    - by nute
    How would you store a time or time range in SQL? It won't be a datetime because it will just be let's say 4:30PM (not, January 3rd, 4:30pm). Those would be weekly, or daily meetings. The type of queries that I need are of course be for display, but also later will include complex queries such as avoiding conflicts in schedule. I'd rather pick the best datatype for that now. I'm using MS SQL Server Express 2005. Thanks! Nathan

    Read the article

  • SQL SERVER – Vacation, Travel and Study – A New Concept

    - by pinaldave
    Quite often when developers go to training sessions they either find it very boring because of study or great because they treat it as a vacation. There should be a perfect balance between study and extra activities. Studying is Boring Studying is very hard. Nobody likes to study, very few people are going to list “studying” as one of their favorite hobbies.  Already my young daughter knows she doesn’t want to study, and I don’t want to either.  If you read my blog regularly you know that I am always saying that we need to be students for life.  However, all philosophy aside, if you are put in a room with an instructor to study for eight hours a day, you are going to feel bored, uncomfortable, and unhappy.  I was a trainer myself, and I understand that all-day study sessions are no fun – even for the trainer.  I always tried to be entertaining, but even eight hours of jokes and laughter is tiresome.  Eight hours at a comedy club would be boring after a little while – and if we can’t even enjoy fun stuff for eight hours straight, how can we expect to study for eight hours straight? Studying for Career or Certification Even those who have advanced degrees and went to college for years, or even decades, find studying hard.  There is a difference between studying for a career and studying for a certification.  At least to get a degree there is a variety of subjects, with labs, exams, and practice problems to make things more interesting.  You can also choose your major and what you want to spend your time studying.  For certification you do not have this luxury.  You have to learn and memorize specific parts, and there is no option to change your major if you don’t like it.  Your option is to gain your certification, or fail.  Many people will find that last option unacceptable. Studying at Vacation We have established: eight hours of uninterrupted study is boring.  That is why I am so excited about what my very good friend is doing with Koenig Solutions.  His whole goal was to make classes that are intensive but not in a traditional format.  He adds in aspects of the vacation.  It is true that you will study and sit with instructors for six or eight hours a day, but in the mornings and evenings you can go out and see the sights in exotic locations.  He has chosen the locations for his training courses for their proximity to tourist attractions like the Himalayas, the Taj Mahal, and Goa, India’s most popular resort town.  Every location has access to great experiences like river rafting, safari tours, or meditation.  There are five locations to choose from: Dehli, Dehradun, Shimla (close to the Himalayas), Goa Beach, and Dubai.  After a day of classes and hours of sight-seeing, you will be more than ready to return to campus tired and ready to study.  This is the kind of study I can do! My friend’s point is that studying and fun can still go hand-in-hand.  How many times have we heard a professor say this?  But this time it is true.  There is great fun in learning in exotic locations.  If you want to travel in India and are interested in also taking the opportunity to learn something, let Koenig Solutions know. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • Java Developer Days India Trip Report

    - by reza_rahman
    You are probably aware of Oracle's decision to discontinue the relatively resource intensive regional JavaOnes in favor of more Java Developer Days, virtual events and deeper involvement with independent conferences. In comparison to the regional JavaOnes, Java Developer Days are smaller, shorter (typically one full day), more focused (mostly Oracle speakers/topics) and more local (targeting cities). For those who have been around the Java ecosystem for a few years, they are basically the current incarnation of the highly popular and developer centric Sun Tech Days. October 21st through October 25th I spoke at Java Developer Days India. This was basically three separate but identical events in the cities of Pune (October 21st), Chennai (October 24th) and Bangalore (October 25th). For those with some familiarity with India, other than Hyderabad these cities are India's IT powerhouses. The events were basically focused on Java EE. I delivered five of the sessions (yes, you read that right), while my friend NetBeans Group Product Manager Ashwin Rao delivered three talks. Jagadish Ramu from the GlassFish team India helped me out in Bangalore by delivering two sessions. It was also a pleasure to introduce my co-contributor to the Cargo Tracker Java EE Blue Prints project Vijay Nair at Bangalore during the opening talk. I thought it was a great dynamic between Ashwin and I flipping between talking about the new features and demoing live code in NetBeans. The following were my sessions (source PDF and abstracts posted as usual on my SlideShare account): JavaEE.Next(): Java EE 7, 8, and Beyond Building Java HTML5/WebSocket Applications with JSR 356 What’s New in Java Message Service 2 JAX-RS 2: New and Noteworthy in the RESTful Web Services API Using NoSQL with JPA, EclipseLink and Java EE The event went well and was packed in all three cities. The Q&A was great and Indian developers were particularly generous with kind words :-). It seemed the event and our presence was appreciated in the truest sense which I must say is a rarity. The events were exhausting but very rewarding at the same time. As hectic as the three city trip was I tried to see at least some of the major sights (mostly at night) since this was my very first time to India. I think the slideshow below is a good representation of the riddle wrapped up in an enigma that is India (and the rest of the Indian sub-continent for that matter): Ironically enough what struck me the most during this trip is the woman pictured below - Shushma. My chauffeur, tour guide and friend for a day, she fluidly navigated the madness that is Mumbai traffic with skills that would make Evel Knievel blush while simultaneously pointing out sights and prompting me to take pictures (Mumbai was my stopover and gateway to/from India). In some ways she is probably the most potent symbol of the new India. When we parted ways I told her she should take solace in the fact she has won mostly without a fight a potentially hazardous battle her sisters across the Arabian sea are still fighting. I'm not sure she entirely understood the significance of what I told her. I hope that she did. I also had occasion to take a pretty cool local bus ride from Chennai to Bangalore instead of yet another boring flight. All in all I really enjoyed the trip to India and hope to return again soon. Jai Hind :-)!

    Read the article

  • Error:couldn't read file-Kernel panic

    - by Thanos
    I have just installed ubuntu 12.04.1. To be honest I had to run installation several times until it was finished fine. When I finally managed to install it properly, I power on the laptop and the grub shoed up! I selected ubuntu generic. It takes some time to load and when it does I get an error message stating that error: couldn't read file Press any key to continue If I press any button nothing happens. If a leave it there, in a short while there is a black screen loading which gives some weird messages [0.946710] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block (0,0) [0.946755] Pid: 1, comm: swapper/0 Not tainted 3.2.0-29-generic #46-Ubuntu [0.946792] Call Trace: [0.946831] [<ffffffff81640ec8>] panic+0x91/0x1a4 [0.946869] [<ffffffff81cfc01e>] mount_block_root+0xdc/0x18e [0.946909] [<ffffffff81002930>] ? populate_rootfs_wait+0x300/0x9d0 [0.946947] [<ffffffff81cfc257>] mount_root+0x54/0x59 [0.946982] [<ffffffff81cfcec9>] prepare_namespace+0x16d/0x1a6 [0.947019] [<ffffffff81cfbd63>] kernel_init+0x153/0x158 [0.947094] [<ffffffff81cfbc10>] ? start_kernel+0x3bd/0x3bd [0.947129] [<ffffffff81664030>] ? gs_change+0x13/0x13 The thing is that the laptop isn't mine. A friend tried to dual boot ubuntu alongside windows 7 but he didn't succeed. Ubuntu option was in grub, but when you tried to boot it rebooted from the start. So from a Live CD I erased ubuntu, started windows to check if something went wrong, and fortunately everything was OK. Windows started normally! So I tried to install ubuntu. Before installation was completed the installer crashed! I was afraid that he would lost windows, something that was true... At that point I tried to install windows but whichever distro(XP, 7{home, proffessional, ultimate},8) I tried it could never reach the end. So I tried to reinstall ubuntu but I was facing those weird messages. What can I do to move on? ______________________________________________________________________ EDIT1: I tried to check and fix(if possible) with GParted it took a lot of hours,although gparted displays only 01:14, I restarted the system and now I get not exactly the same messages. Numbers in braces [ ] are different [0.818189] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block (0,0) [0.818235] Pid: 1, comm: swapper/0 Not tainted 3.2.0-29-generic #46-Ubuntu [0.818272] Call Trace: [0.818312] [<ffffffff81640ec8>] panic+0x91/0x1a4 [0.818351] [<ffffffff81cfc01e>] mount_block_root+0xdc/0x18e [0.818391] [<ffffffff81002930>] ? populate_rootfs_wait+0x300/0x9d0 [0.818428] [<ffffffff81cfc257>] mount_root+0x54/0x59 [0.818464] [<ffffffff81cfcec9>] prepare_namespace+0x16d/0x1a6 [0.818501] [<ffffffff81cfbd63>] kernel_init+0x153/0x158 [0.818574] [<ffffffff81cfbc10>] ? start_kernel+0x3bd/0x3bd [0.818610] [<ffffffff81664030>] ? gs_change+0x13/0x13 What on earth is going on? ______________________________________________________________________ EDIT2: I forgot to mention that my friend gave a punch to his laptop during a game. After that his cooler became to make a weird noise so I checked and it is a bit tortuous but it is working. What I beleive must be wrong is that his HDD makes a weird noise while trying to load ubuntu, which means he might need a new HDD. Could that be true?

    Read the article

< Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >