Search Results

Search found 44026 results on 1762 pages for 'raid question'.

Page 42/1762 | < Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >

  • Google Search Parameter Question

    - by Brian
    I've been trying to determine different parameters used by Google in their search queries. In particular, the usg parameter is what is giving me troubles. Here is an example value given for it, which is from an actual Google query: usg=0_zDqudnCN52ATGjAl3tignXNtBo4%3D Does anyone know what it could be for / recognize it? I've done a bit of digging, but haven't found any confirmation as to what it could be. Here is the link that I took a look at: http://www.webmasterworld.com/google/3892573.htm

    Read the article

  • Dell Poweredge R410 replace PERC S100 with PERC 6i

    - by Robe Eleckers
    I want to replace the PERC S100 RAID Controller with a PERC6i to be able to use 4 SAS harddrives instead of only SATA drives. What exactly do I need for this, what I've got so far: PERC6i PCIe x8 card. 4 x SAS 300GB 15000rpm drives Some questions I have Do I need a different backplane to accomodate the SAS disks? If so, what kind of backplane? Do I need a special cable to hookup the PERC6i with the backplane? If so, what kind of cable? Thanks.

    Read the article

  • Resuming blogging activities and a maths question

    - by ali.mukadam
    Resuming my blogging activities and unlike Dumbledore, I do not have a pensieve to review my thoughts and put them in order. On the other hand, thinking of maths problems somehow seem to make them clearer. So before I start writing long-winding blog posts, here's one I was given 16 years ago: The length of a rectangle is 6 cm smaller than its width. If the area of the rectangle is 16, what is its perimeter? Hint: Solvable in 5 lines or less. Cheers, Ali

    Read the article

  • DNS propogation question with name server change

    - by Brian
    The registrar I have is networksolutions.com, and for quite a while, the name servers were pointing to Site5.com, where hosting is for one of my domains. I wanted to bring DNS control back to networksolutions, so I pointed the name servers back to networksolutions and added in all my A records. However, I noticed that the site soon became unreachable. I'm curious as to why this happened? If the domain was pointing to either the old name servers or the new ones, it would still have the proper A records and whatnot. Is this because when I changed name servers, a request was made to delete them completely, and then the DNS servers worldwide have to wait for network solutions to send out the new ones or something? I was hoping this would be a switch with zero downtime, such as a normal A record change.

    Read the article

  • SEO question, getting info about websites

    - by michael
    I don't know much about SEO. I have a csv file with 200,000 links to websites i want to add another field (or maybe couple of them) to each link in the csv file with page ranking of each link and maybe other interesting metrics and info about the link. I saw a free API from http://apiwiki.seomoz.org/ i can maybe use to build a simple script, but it's limited to 3 links for second which will roughly take 1100 minutes or 18 hours to run any other ideas how to get this kind of simple metrics about each link ? thanks !

    Read the article

  • Design Book–Dimensional or No Dimensional, that is..the question

    - by drsql
    So, it is right there in the title of the book “Relational Database Design” etc (the title is kinda long :)  But as I consider what to cover and, conversely, what not to cover, dimensional design inevitably pops up. So I am considering including it in the book. One thing I try to do is to cover topics to a level where you can start using it immediately, and I am not sure that I could get a deep enough coverage of the subject to do that. I don’t really feel like it has to be the definitive source...(read more)

    Read the article

  • RAIDZ vs RAID1+0

    - by Hiro2k
    Hi guys I just got 4 SSDs for my FreeNAS box. This server is only used to serve a single iSCSI extent to my Citrix XenServer pool and was wondering if I should setup them up in a RAIDZ or a RAID 1+0 configuration. This isn't used for anything in production, just for my test lab so I'm not sure which one is going to be better in this scenario. Will I see a major difference in speed or reliability? Currently the server has three 500GB Western Digital Blue drives and it's dog slow when I deploy a new version of our software on it, hence the upgrade.

    Read the article

  • Oracle pl\sql question for my homework in oracle 11G class [migrated]

    - by Bjolds
    I am new to oracle 11G programming and i have run into a tough situation with pl\sql funtions and automation. I ame unsure how to create the function for the automation of Registration system for a College registration system. Here is what i want to do. I want to automate the registrations system so that it automaticly registers students. Then I want a procedure to automate the grading system. I have included the code that i am written to make most of this assignment work which it does but unsure how to incorporate Pl\SQL automated fuctions for the registrations system, and the grading system. So Any help or Ideas I would greatly appreciate please. set Linesize 250 set pagesize 150 drop table student; drop table faculty; drop table Course; drop table Section; drop table location; DROP TABLE courseInstructor; DROP TABLE Registration; DROP TABLE grade; create table student( studentid number(10), Lastname varchar2(20), Firstname Varchar2(20), MI Char(1), address Varchar2(20), city Varchar2(20), state Char(2), zip Varchar2(10), HomePhone Varchar2(10), Workphone Varchar2(10), DOB Date, Pin VARCHAR2(10), Status Char(1)); ALTER TABLE Student Add Constraint Student_StudentID_pk Primary Key (studentID); Insert into student values (1,'xxxxxxxx','xxxxxxxxxx','x','xxxxxxxxxxxxxxx','Columbus','oh','44159','xxx-xxx-xxxx','xxx-xxx-xxxx','06-Mar-1957','1211','c'); create table faculty( FacultyID Number(10), FirstName Varchar2(20), Lastname Varchar2(20), MI Char(1), workphone Varchar2(10), CellPhone Varchar2(10), Rank Varchar2(20), Experience Varchar2(10), Status Char(1)); ALTER TABLE Faculty ADD Constraint Faculty_facultyId_PK PRIMARY KEY (FacultyID); insert into faculty values (1,'xxx','xxxxxxxxxxxx',xxx-xxx-xxxx','xxx-xxx-xxxx','professor','20','f'); create table Course( CourseId number(10), CourseNumber Varchar2(20), CourseName Varchar(20), Description Varchar(20), CreditHours Number(4), Status Char(1)); ALTER TABLE Course ADD Constraint Course_CourseID_pk PRIMARY KEY(CourseID); insert into course values (1,'cit 100','computer concepts','introduction to PCs','3.0','o'); insert into course values (2,'cit 101','Database Program','Database Programming','4.0','o'); insert into course values (3,'Math 101','Algebra I','Algebra I Concepts','5.0','o'); insert into course values (4,'cit 102a','Pc applications','Aplications 1','3.0','o'); insert into course values (5,'cit 102b','pc applications','applications 2','3.0','o'); insert into course values (6,'cit 102c','pc applications','applications 3','3.0','o'); insert into course values (7,'cit 103','computer concepts','introduction systems','3.0','c'); insert into course values (8,'cit 110','Unified language','UML design','3.0','o'); insert into course values (9,'cit 165','cobol','cobol programming','3.0','o'); insert into course values (10,'cit 167','C++ Programming 1','c++ programming','4.0','o'); insert into course values (11,'cit 231','Expert Excel','spreadsheet apps','3.0','o'); insert into course values (12,'cit 233','expert Access','database devel.','3.0','o'); insert into course values (13,'cit 169','Java Programming I','Java Programming I','3.0','o'); insert into course values (14,'cit 263','Visual Basic','Visual Basic Prog','3.0','o'); insert into course values (15,'cit 275','system analysis 2','System Analysis 2','3.0','o'); create table Section( SectionID Number(10), CourseId Number(10), SectionNumber VarChar2(10), Days Varchar2(10), StartTime Date, EndTime Date, LocationID Number(10), SeatAvailable Number(3), Status Char(1)); ALTER TABLE Section ADD Constraint Section_SectionID_PK PRIMARY KEY(SectionID); insert into section values (1,1,'18977','r','21-Sep-2011','10-Dec-2011','1','89','o'); create table Location( LocationId Number(10), Building Varchar2(20), Room Varchar2(5), Capacity Number(5), Satus Char(1)); ALTER TABLE Location ADD Constraint Location_LocationID_pk PRIMARY KEY (LocationID); insert into Location values (1,'Clevleand Hall','cl209','35','o'); insert into Location values (2,'Toledo Circle','tc211','45','o'); insert into Location values (3,'Akron Square','as154','65','o'); insert into Location values (4,'Cincy Hall','ch100','45','o'); insert into Location values (5,'Springfield Dome','SD','35','o'); insert into Location values (6,'Dayton Dorm','dd225','25','o'); insert into Location values (7,'Columbus Hall','CB354','15','o'); insert into Location values (8,'Cleveland Hall','cl204','85','o'); insert into Location values (9,'Toledo Circle','tc103','75','o'); insert into Location values (10,'Akron Square','as201','46','o'); insert into Location values (11,'Cincy Hall','ch301','73','o'); insert into Location values (12,'Dayton Dorm','dd245','57','o'); insert into Location values (13,'Springfield Dome','SD','65','o'); insert into Location values (14,'Cleveland Hall','cl241','10','o'); insert into Location values (15,'Toledo Circle','tc211','27','o'); insert into Location values (16,'Akron Square','as311','28','o'); insert into Location values (17,'Cincy Hall','ch415','73','o'); insert into Location values (18,'Toledo Circle','tc111','67','o'); insert into Location values (19,'Springfield Dome','SD','69','o'); insert into Location values (20,'Dayton Dorm','dd211','45','o'); Alter Table Student Add Constraint student_Zip_CK Check(Rtrim (Zip,'1234567890-') is null); Alter Table Student ADD Constraint Student_Status_CK Check(Status In('c','t')); Alter Table Student ADD Constraint Student_MI_CK2 Check(RTRIM(MI,'abcdefghijklmnopqrstuvwxyz')is Null); Alter Table Student Modify pin not Null; Alter table Faculty Add Constraint Faculty_Status_CK Check(Status In('f','a','i')); Alter table Faculty ADD Constraint Faculty_Rank_CK Check(Rank In ('professor','doctor','instructor','assistant','tenure')); Alter table Faculty ADD Constraint Faculty_MI_CK2 Check(RTRIM(MI,'abcdefghijklmnopqrstuvwxyz')is Null); Update Section Set Starttime = To_date('09-21-2011 6:00 PM', 'mm-dd-yyyy hh:mi pm'); Update Section Set Endtime = To_date('12-10-2011 9:50 PM', 'mm-dd-yyyy hh:mi pm'); alter table Section Add Constraint StartTime_Status_CK Check (starttime < Endtime); Alter Table Section Add Constraint Section_StartTime_ck check (StartTime < EndTime); Alter Table Section ADD Constraint Section_CourseId_FK FOREIGN KEY (CourseID) References Course(CourseId); Alter Table Section ADD Constraint Section_LocationID_FK FOREIGN KEY (LocationID) References Location (LocationId); Alter Table Section ADD Constraint Section_Days_CK Check(RTRIM(Days,'mtwrfsu')IS Null); update section set seatavailable = '99'; Alter Table Section ADD Constraint Section_SeatsAvailable_CK Check (SeatAvailable < 100); Alter Table Course Add Constraint Course_CreditHours_ck check(CreditHours < = 6.0); update location set capacity = '99'; Alter Table Location Add Constraint Location_Capacity_CK Check(Capacity < 100); Create Table Registration ( StudentID Number(10), SectionID Number(10), Constraint Registration_pk Primary key (studentId, Sectionid)); Insert into registration values (1, 2); Insert into Registration values (2, 3); Insert into registration values (3, 4); Insert into registration values (4, 5); Insert into registration values (5, 6); Insert into registration values (6, 7); Insert into registration values (7, 8); Insert into registration values (8, 9); insert into registration values (9, 10); insert into registration values (10, 11); insert into registration values (9, 12); insert into registration values (8, 13); insert into registration values (7, 14); insert into registration values (6, 15); insert into registration values (5, 17); insert into registration values (4, 18); insert into registration values (3, 19); insert into registration values (2, 20); insert into registration values (1, 21); insert into registration values (2, 22); insert into registration values (3, 23); insert into registration values (4, 24); insert into registration values (5, 25); Insert into registration values (6, 24); insert into registration values (7, 23); insert into registration values (8, 22); insert into registration values (9, 21); insert into registration values (10, 20); insert into registration values (9, 19); insert into registration values (8, 17); Create Table courseInstructor( FacultyID Number(10), SectionID Number(10), Constraint CourseInstructor_pk Primary key (FacultyId, SectionID)); insert into courseInstructor values (1, 1); insert into courseInstructor values (2, 2); insert into courseInstructor values (3, 3); insert into courseInstructor values (4, 4); insert into courseInstructor values (5, 5); insert into courseInstructor values (5, 6); insert into courseInstructor values (4, 7); insert into courseInstructor values (3, 8); insert into courseInstructor values (2, 9); insert into courseInstructor values (1, 10); insert into courseInstructor values (5, 11); insert into courseInstructor values (4, 12); insert into courseInstructor values (3, 13); insert into courseInstructor values (2, 14); insert into courseInstructor values (1, 15); Create table grade( StudentID Number(10), SectionID Number(10), Grade Varchar2(1), Constraint grade_pk Primary key (StudentID, SectionID)); CREATE OR REPLACE TRIGGER TR_CreateGrade AFTER INSERT ON Registration FOR EACH ROW BEGIN INSERT INTO grade (SectionID,StudentID,Grade) VALUES(:New.SectionID,:New.StudentID,NULL); END TR_createGrade; / CREATE OR REPLACE FORCE VIEW V_reg_student_course AS SELECT Registration.StudentID, student.LastName, student.FirstName, course.CourseName, Registration.SectionID, course.CreditHours, section.Days, TO_CHAR(StartTime, 'MM/DD/YYYY') AS StartDate, TO_CHAR(StartTime, 'HH:MI PM') AS StartTime, TO_CHAR(EndTime, 'MM/DD/YYYY') AS EndDate, TO_CHAR(EndTime, 'HH:MI PM') AS EndTime, location.Building, location.Room FROM registration, student, section, course, location WHERE registration.StudentID = student.StudentID AND registration.SectionID = section.SectionID AND section.LocationID = location.LocationID AND section.CourseID = course.CourseID; CREATE OR REPLACE FORCE VIEW V_teacher_to_course AS SELECT courseInstructor.FacultyID, faculty.FirstName, faculty.LastName, courseInstructor.SectionID, section.Days, TO_CHAR(StartTime, 'MM/DD/YYYY') AS StartDate, TO_CHAR(StartTime, 'HH:MI PM') AS StartTime, TO_CHAR(EndTime, 'MM/DD/YYYY') AS EndDate, TO_CHAR(EndTime, 'HH:MI PM') AS EndTime, location.Building, location.Room FROM courseInstructor, faculty, section, course, location WHERE courseInstructor.FacultyID = faculty.FacultyID AND courseInstructor.SectionID = section.SectionID AND section.LocationID = location.LocationID AND section.CourseID = course.CourseID; SELECT * FROM V_reg_student_course; SELECT * FROM V_teacher_to_course;

    Read the article

  • Excel Conditional Formatting With Question Mark

    - by kzh
    I would like to use a conditional formatting rule in an excel file that would color any box with a question mark in it red. It seems that Excel is using a question mark as a wild card and will turn all cells with at least one character in them red. How can i escape the question mark? These don't seem to work: "?" \? '?' ??

    Read the article

  • Strange performance issue with Dell R7610 and LSI 2208 RAID controller

    - by GregC
    Connecting controller to any of the three PCIe x16 slots yield choppy read performance around 750 MB/sec Lowly PCIe x4 slot yields steady 1.2 GB/sec read Given same files, same Windows Server 2008 R2 OS, same RAID6 24-disk Seagate ES.2 3TB array on LSI 9286-8e, same Dell R7610 Precision Workstation with A03 BIOS, same W5000 graphics card (no other cards), same settings etc. I see super-low CPU utilization in both cases. SiSoft Sandra reports x8 at 5GT/sec in x16 slot, and x4 at 5GT/sec in x4 slot, as expected. I'd like to be able to rely on the sheer speed of x16 slots. What gives? What can I try? Any ideas? Please assist Cross-posted from http://en.community.dell.com/support-forums/desktop/f/3514/t/19526990.aspx Follow-up information We did some more performance testing with reading from 8 SSDs, connected directly (without an expander chip). This means that both SAS cables were utilized. We saw nearly double performance, but it varied from run to run: {2.0, 1.8, 1.6, and 1.4 GB/sec were observed, then performance jumped back up to 2.0}. The SSD RAID0 tests were conducted in a x16 PCIe slot, all other variables kept the same. It seems to me that we were getting double the performance of HDD-based RAID6 array. Just for reference: maximum possible read burst speed over single channel of SAS 6Gb/sec is 570 MB/sec due to 8b/10b encoding and protocol limitations (SAS cable provides four such channels).

    Read the article

  • Question to ask during interviews to get a sense of the development process

    - by davidk01
    I just watched a presentation about simplicity by Rich Hickey at InfoQ where he goes over the constructs programmers use to produce artifacts and how those constructs make various trade-offs when it comes to achieving simple artifacts. I think that most programmers would agree with a lot of what he says but at the end of the day I don't know how many development shops are actively practicing development processes and using tools that allow them to make simple artifacts. As an interview candidate I would like to work at a software development shop where producing simple artifacts is a top priority. What are some questions I can ask to figure out if the place that is interviewing me is actually such a place.

    Read the article

  • SQL SERVER Find Largest Supported DML Operation Question to You

    SQL Server is very big and it is not possible to know everything in SQL Server but we all keep learning. Recently I was going over the best practices of transactions log and I come across following statement. The log size must be at least twice the size of largest supported DML operation (using uncompressed [...]...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Clarity is important, both in question and in answer.

    - by gerrylowry
    clarity is important ... i'm often reminded of the Clouseau movie in which Peter Sellers as Chief Inspector Clouseau asks a hotel clerk "Does your dog bite?" ... the clerk answers "no" ... after Clouseau has been bitten by the dog, he looks at the hotel clerk who says "That's not my dog".  Clarity is important, both in question and in answer. i've been a member of forums.asp.net since 2008 ... like many of my peers at forums.asp.net, i've answered my fair share of questions. FWIW, the purpose of this, my first web log post to http://weblogs.asp.net/gerrylowry is to help new members ask better questions and in turn get better answers. TIMTOWTDI  =.  there is more than one way to do it imho, the best way to ask a question in any forum, or even person to person, is to first formulate your question and then ask yourself to answer your own question. Things to consider when asking (the more complete your question, the more likely you'll get the answer you require): -- have you searched Google and/or your favourite search engine(s) before posting your question to forums.asp.net; examples: site:msdn.microsoft.com entity framework 5.0 c#http://lmgtfy.com/?q=site%3Amsdn.microsoft.com+entity+framework+5.0+c%23 site:forums.asp.net MVC tutorial c#http://lmgtfy.com/?q=site%3Aforums.asp.net+MVC+tutorial+c%23 -- are you asking your question in the correct forum?  look at the forums' descriptions at http://forums.asp.net/; examples: Getting Started If you have a general ASP.NET question on a topic that's not covered by one of the other more specific forums - ask it here. MVC Discussions regarding ASP.NET Model-View-Controller (MVC) C# Questions about using C# for ASP.NET development Note:  if your question pertains more to c# than to MVC, choosing the C# forum is likely to be more appropriate. -- is your post subject clear and concise, yet not too vague? compare these three subjects (all three had something to do with GridView):     (1)    please help     (2)    gridview      (3)    How to show newline in GridView  -- have you clearly explained your scenario? compare:  my leg hurts   with   when i walk too much, my right knee hurts in the knee joint  compare:  my code does not work    with    when i enter a date as 2012-11-8, i get a FormatException -- have you checked your spelling, your grammar, and your English? for better or worse, English is the language of forums.asp.net ... many of the currently 170000++ forums.asp.net are not native speakers of English; that's okay ... however, there are times when choosing the more appropriate words will likely get one a better answer; fortunately, there are web tools to help you formulate your question, for example, http://translate.google.com/.  -- have you provided relevant information about your environment? here are a few examples ... feel free to include other items to your question ... rule of thumb:  if you think a given detail is relevant, it likely is -- what technology are you using?    ASP.NET MVC 4, ASP.NET MVC 3, WebForms, ...  -- what version of Visual Studio are you using?  vs2012 (ultimate, professional, express), vs2010, vs2008 ... -- are you hosting your own website?  are you using a shared hosting service? -- are you experience difficulties in just one browser? more than one browser? -- what browser version(s) are you using?   ie8? ie9? ... -- what is your operating system?     win8, win7, vista, XP, server 2008 R2 ... -- what is your database?   SQL Server 2008 R2, ss2005, MySQL, Oracle, ... -- what is your web server?  iis 7.5, iis 6, .... -- have you provided enough information for someone to be able to answer your question? Here's an actual example from an O.P. that i hope is self-explanatory: I'm trying to make a simple calculator when i write the code in windows application it worked when i tried it in web application it doesn't work and there are no errors what should i do ??!! -- have you included unnecessary information? more than once, i've seen the O.P. (original post, original poster) include many extra lines of code that were not relevant to the actual question; the more unnecessary code that you include, the less likely your volunteer peers will be motivated to donate their time to help you. -- have you asked the question that you want answered? "Does this dog bite?" -- are your expectations reasonable? -- generally, persons who are going to answer your questions are your peers ... they are unpaid volunteers ... -- are you looking for help with your homework, work assignment, or hobby? or, are you expecting someone else to do your work for you?  -- do you expect a complete solution or are you simply looking for guidance and direction? -- you are likely to get more help by first making a reasonable effort to help yourself first Clarity is important, both in question and in answer. if you are answering someone else's question, please remember that clear answers are just as important as clear questions; would you understand your own answer? Things to consider when answering: -- have you tested your code example?  if you have, say so; if you've not tested your code example, also say so -- imho, it's okay to guess as long as you clearly state that you're guessing ... sometimes a wrong guess can still help the O.P. find her/his way to the right answer -- meanness does not contribute to being helpful; sometimes one may become frustrated with the O.P. and/or others participating in a thread, if that happens to you, be kind regardless; speaking from my own experience, at least once i've allowed myself to be frustrated into writing something inappropriate that i've regretted later ... being a meany does not feel good ... being kind and helpful feels fantastic! Tip:  before asking your question, read more than a few existing questions and answers to get a sense of how your peers ask and answer questions. Gerry P.S.:  try to avoid necroposting and piggy backing. necroposting is adding to an old post, especially one that was resolved months ago. piggy backing is adding your own question to someone else's thread.

    Read the article

  • How to know which block device maps to which physical drive

    - by Karolis T.
    I have a server with software RAID 1, two hot-swap sata disks. One hard drive started showing errors, I'm thinking about removing and replacing it, only problem is that I have no idea which of the two correspond to which devices. And I can't shut the server down to find out. I have /dev/sda and /dev/sdb, /dev/sda is the failing one. Thought about doing something along the lines # mdadm --manage /dev/md0 --remove /dev/sda1 then somehow stop/suspend the drive using tuning software and try to listen which of the two stopped, but that's not gonna work in a noisy server environment. Drive panels have no LEDs. Thanks for any ideas!

    Read the article

  • ZFS: Mirror vs. RAID-Z

    - by John Clayton
    I'm planning on building a file server using OpenSolaris and ZFS that will provide two primary services - be an iSCSI target for XenServer virtual machines & be a general home file server. The hardware I'm looking at includes 2x 4-port SATA controllers, 2x small boot drives (one on each controller), and 4x big drives for storage. This allows one free port per controller for upgrading the array down the road. Where I'm a little confused is how to setup the storage drives. For performance, mirroring appears to be king. I'm having a hard time seeing what the benefit would be of using RAIDZ over mirroring would be. With this setup I can see two options - two mirrored pools in one stripe, or RAIDZ2. Both should protect against 2 drive failures, and/or one controller failure...the only benefit of RAIDZ2 would be that any 2 drives could fail. The storage should be 50% of capacity in both cases, but the first should have much better performance, right? The other thing I'm trying to wrap my mind around is the benefit of mirrored arrays with more than two devices. For data integrity what, if any, would be the benefit of a RAIDZ over a three-way mirror? Since ZFS maintains file integrity what does RAIDZ bring to the table...doesn't ZFS's integrity checks negate the value of RAIDZ's parity?

    Read the article

  • High server load - [jbd2/md1-8] using 99.99% IO

    - by Alex
    I've been having spike in load over the last week. This usually occurs once or twice a day. I've managed to identify from iotop that [jbd2/md1-8] is using 99.99 % IO. During the high load times there is no high traffic to the server. Server specs are: AMD Opteron 8 core 16 GB RAM 2x2.000 GB 7.200 RPM HDD Software Raid 1 Cloudlinux + Cpanel Mysql is properly tuned Apart from the spikes, the load usually is around 0.80 at most. I've searched around but can't find what [jbd2/md1-8] does exactly. Has anyone had this problem or does anyone know a possible solution? Thank you. UPDATE: TIME TID PRIO USER DISK READ DISK WRITE SWAPIN IO COMMAND 16:05:36 399 be/3 root 0.00 B/s 38.76 K/s 0.00 % 99.99 % [jbd2/md1-8]

    Read the article

  • Don’t Program by Fear, Question Everything

    - by João Angelo
    Perusing some code base I’ve recently came across with a code comment that I would like to share. It was something like this: class Animal { public Animal() { this.Id = Guid.NewGuid(); } public Guid Id { get; private set; } } class Cat : Animal { public Cat() : base() // Always call base since it's not always done automatically { } } Note: All class names were changed to protect the innocent. To clear any possible doubts the C# specification explicitly states that: If an instance constructor has no constructor initializer, a constructor initializer of the form base() is implicitly provided. Thus, an instance constructor declaration of the form C(...) {...} is exactly equivalent to C(...): base() {...} So in conclusion it’s clearly an incorrect comment but what I find alarming is how a comment like that gets into a code base and survives the test of time. Not to forget what it can do to someone who is making a jump from other technologies to C# and reads stuff like that.

    Read the article

  • C string question

    - by user208454
    I am writing a simple c program which reverses a string, taking the string from argv[1]. Here is the code: #include <stdio.h> #include <stdlib.h> #include <string.h> char* flip_string(char *string){ int i = strlen(string); int j = 0; // Doesn't really matter all I wanted was the same size string for temp. char* temp = string; puts("This is the original string"); puts(string); puts("This is the \"temp\" string"); puts(temp); for(i; i>=0; i--){ temp[j] = string[i] if (j <= strlen(string)) { j++; } } return(temp); } int main(int argc, char *argv[]){ puts(flip_string(argv[1])); printf("This is the end of the program\n"); } That's basically it, the program compiles and everything but does not return the temp string in the end (just blank space). In the beginning it prints temp fine when its equal to string. Furthermore if I do a character by character printf of temp in the for loop the correct temp string in printed i.e. string - reversed. just when I try to print it to standard out (after the for loop/ or in the main) nothing happens only blank space is printed.

    Read the article

  • Google adwords API - credit card safety question

    - by user5650
    Google is asking me to fax credit card xerox in order to activate adwords API in MCC. 1) Are there alternatives to this - is there a 3rd party provider who will give me this service without me sending them the credit card info? 2) How secure is it to send my credit card fax via some online fax service? 3) Do you think they will reject the application if I hide my CVV number in the fax? Any other thoughts appreciated.

    Read the article

  • Getting around the lack of GPT support with CentOS 5.4

    - by sxanness
    Here is my issue and I hoping that there is someone out there that has an answer so I don't end up stuck here at my co-location all day. Last night I came here and upgraded a server (Dell 2970) to have four 1TB Hard Drives in RAID 5 which leaves a 3TB block. I tried to partition this but keep getting an error that GPT is not supported so I found a site online telling me I need to run the dd command and right random data to /dev/sda. This is great (if it works) but taking forever. I have two more machines to upgrade today and not a chair in site. Does anyone have advice on how I can avoid this issue beforehand? Thank You for your advice and support.

    Read the article

  • Excel Conditional Formatting Escaping a Question Mark

    - by kzh
    I would like to use a conditional formatting rule in an excel file that would color any box with a question mark in it red. It seems that Excel is using a question mark as a wild card and will turn all cells with at least one character in them red. How can i escape the question mark? These don't seem to work: "?" \? '?' ??

    Read the article

  • Question about casting a class in Java with generics

    - by Florian F
    In Java 6 Class<? extends ArrayList<?>> a = ArrayList.class; gives and error, but Class<? extends ArrayList<?>> b = (Class<? extends ArrayList<?>>)ArrayList.class; gives a warning. Why is (a) an error? What is it, that Java needs to do in the assignment, if not the cast shown in (b)? And why isn't ArrayList compatible with ArrayList? I know one is "raw" and the other is "generic", but what is it you can do with an ArrayList and not with an ArrayList, or the other way around?

    Read the article

  • Google adwords API - credit card safety question

    - by anon
    Hi, Google is asking me to fax credit card xerox in order to activate adwords API in MCC. This really sucks imo... they could have had prepaid option. In any case, my questions: 1) Are there alternatives to this - is there a 3rd party provider who will give me this service without me sending them the credit card info? 2) How secure is it to send my credit card fax via some online fax service? 3) Do you think they will reject the application if I hide my CVV number in the fax? Any other thoughts appreciated :) thanks

    Read the article

  • Dns hosting question

    - by ArthurD42
    Hi, I'm new to dns hosting and I have recently setup google apps for the 'mail.' cname record. How can I use it to display files on the www URL? ie: 'www.' cname. Or is it not possible to upload files using dns hosting only? I also have hosting elsewhere and wanted to know if I could forward the www cname to a subdirectory on that server, but not displaying the subdirectory URL publicly, rather the address bar constantly remains as the dns hosted (original) domain? Thank you!

    Read the article

< Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >