Search Results

Search found 1202 results on 49 pages for 'stand'.

Page 42/49 | < Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >

  • What's going on with INETA and the Regional Speakers Bureau?

    - by Chris Williams
    For those of you that have been waiting patiently (and not so patiently) I'm happy to say that we're very near completion on some changes/enhancements/improvements that will allow us to finally go live with the INETA Regional Speakers Bureau. I know quite a few of you have already registered, which is great (though some of you may need to come back and update your info) and we've had a few folks submit requests, mostly in a test capacity, but soon we'll be up and live. Here's how it breaks down. Be sure to read this, because things have changed a bit from when we initially announced it. 1. The majority of our speaker/event funding is going into the Regional Speakers Bureau.  The National Bureau still exists, but it's a good bit smaller than it was before, and it's not an "every group" benefit anymore. We'll be using the National Bureau as more of a strategic task force, targeting high impact events and areas that need some community building love from INETA. These will be identified and handled on a case by case basis, and may include more than just user group events. 2. You're going to get more events per group, per year than you did before. Not only are we focusing more resources on this program, but we're also making a lot of efforts to use it more effectively. With the INETA Regional Speakers Bureau, you should be able to get 2-3 INETA speakers per year, on average. Not every geographical area will have exactly the same experience, but we're doing the best we can. 3. It's not a farm team program for the National Bureau. Unsurprisingly, I managed to offend a number of people when I previously made the comment that the Regional Speakers Bureau program was a farm team or stepping stone to the National Bureau. It was a poor choice of words.  Anyone can participate in the Regional Speakers Bureau, and I look forward to working with all of you. 4. There is assistance for your efforts. The exact final details are still being hammered out, but expect it to look something like this: (all distances listed are based on a round trip) Distances < 120 miles = $0 121 miles - 240 miles = $50 (effectively 1 to 2 hours, each way) 241 miles - 360 miles = $100 (effectively 2 to 3 hours, each way) 361 miles - 480 miles = $200 (effectively 3 to 4 hours, each way) For those of you who travel a lot, we're working on a solution to handle group visits when you're away from home. These will (for now) be handled on a case by case basis. 5. We're going to make it as easy as possible to work with the program. In order to do this, we need a few things from you. For speakers, that means your home address. It also means (maybe) filling out a simple 1 line expense report via the INETA website. For user groups, it means making sure your meeting address is up to date as well. 6. Distances will be automatically calculated from your home of record to the user group event and back. We realize that this is not a perfect solution to every instance, but we're not paying you to speak at an event, and you won't be taxed on this money. It's simply some assistance to make your community efforts easier. Our way of saying thanks for everything you do. 7. Sounds good so far, what's the catch? There's always a catch, right? In this case there are two of them: 1) At this time, Microsoft employees are welcome to use the website to line up speaking engagements with user groups, but are not eligible for financial assistance. 2) Anyone can register and use the website to line up speaking engagements with user groups, however you must receive and maintain a net score of 3+ positive ratings (we're implementing a thumbs up / thumbs down system) in order to receive financial assistance. These ratings are provided by the User Group leaders after the meeting has taken place. 8. Involvement by the User Group leaders is a key factor in the success of this program. Your job isn't done once you request a speaker. After you've had your meeting, it's critical that you go back to the website and take a very small survey. Doing this ensures that the speaker gets rated (and compensated if eligible) and also ensures that you can make another request, since you won't be able to make a new request if you have an old one outstanding. 9. What about Canada? We're definitely working on that. Unfortunately nothing new to report on that front, other than to say that we're trying. So... this is where things stand currently. We're working very quickly to get this in place and get speakers and groups together. If you have any questions, please leave a comment below and I'll answer them as quickly as possible. If I've forgotten anything, or if things change, I'll update it here. Thanks, Chris G. Williams INETA Board of Directors

    Read the article

  • Use WLST to Delete All JMS Messages From a Destination

    - by james.bayer
    I got a question today about whether WebLogic Server has any tools to delete all messages from a JMS Queue.  It just so happens that the WLS Console has this capability already.  It’s available on the screen after the “Show Messages” button is clicked on a destination’s Monitoring tab as seen in the screen shot below. The console is great for something ad-hoc, but what if I want to automate this?  Well it just so happens that the console is just a weblogic application layered on top of the JMX Management interface.  If you look at the MBean Reference, you’ll find a JMSDestinationRuntimeMBean that includes the operation deleteMessages that takes a JMS Message Selector as an argument.  If you pass an empty string, that is essentially a wild card that matches all messages. Coding a stand-alone JMX client for this is kind of lame, so let’s do something more suitable to scripting.  In addition to the console, WebLogic Scripting Tool (WLST) based on Jython is another way to browse and invoke MBeans, so an equivalent interactive shell session to delete messages from a destination would looks like this: D:\Oracle\fmw11gr1ps3\user_projects\domains\hotspot_domain\bin>setDomainEnv.cmd D:\Oracle\fmw11gr1ps3\user_projects\domains\hotspot_domain>java weblogic.WLST   Initializing WebLogic Scripting Tool (WLST) ...   Welcome to WebLogic Server Administration Scripting Shell   Type help() for help on available commands   wls:/offline> connect('weblogic','welcome1','t3://localhost:7001') Connecting to t3://localhost:7001 with userid weblogic ... Successfully connected to Admin Server 'AdminServer' that belongs to domain 'hotspot_domain'.   Warning: An insecure protocol was used to connect to the server. To ensure on-the-wire security, the SSL port or Admin port should be used instead.   wls:/hotspot_domain/serverConfig> serverRuntime() Location changed to serverRuntime tree. This is a read-only tree with ServerRuntimeMBean as the root. For more help, use help(serverRuntime)   wls:/hotspot_domain/serverRuntime> cd('JMSRuntime/AdminServer.jms/JMSServers/JMSServer-0/Destinations/SystemModule-0!Queue-0') wls:/hotspot_domain/serverRuntime/JMSRuntime/AdminServer.jms/JMSServers/JMSServer-0/Destinations/SystemModule-0!Queue-0> ls() dr-- DurableSubscribers   -r-- BytesCurrentCount 0 -r-- BytesHighCount 174620 -r-- BytesPendingCount 0 -r-- BytesReceivedCount 253548 -r-- BytesThresholdTime 0 -r-- ConsumersCurrentCount 0 -r-- ConsumersHighCount 0 -r-- ConsumersTotalCount 0 -r-- ConsumptionPaused false -r-- ConsumptionPausedState Consumption-Enabled -r-- DestinationInfo javax.management.openmbean.CompositeDataSupport(compositeType=javax.management.openmbean.CompositeType(name=DestinationInfo,items=((itemName=ApplicationName,itemType=javax.management.openmbean.SimpleType(name=java.lang.String)),(itemName=ModuleName,itemType=javax.management.openmbean.SimpleType(name=java.lang.String)),(itemName openmbean.SimpleType(name=java.lang.Boolean)),(itemName=SerializedDestination,itemType=javax.management.openmbean.SimpleType(name=java.lang.String)),(itemName=ServerName,itemType=javax.management.openmbean.SimpleType(name=java.lang.String)),(itemName=Topic,itemType=javax.management.openmbean.SimpleType(name=java.lang.Boolean)),(itemName=VersionNumber,itemType=javax.management.op ule-0!Queue-0, Queue=true, SerializedDestination=rO0ABXNyACN3ZWJsb2dpYy5qbXMuY29tbW9uLkRlc3RpbmF0aW9uSW1wbFSmyJ1qZfv8DAAAeHB3kLZBABZTeXN0ZW1Nb2R1bGUtMCFRdWV1ZS0wAAtKTVNTZXJ2ZXItMAAOU3lzdGVtTW9kdWxlLTABAANBbGwCAlb6IS6T5qL/AAAACgEAC0FkbWluU2VydmVyAC2EGgJW+iEuk+ai/wAAAAsBAAtBZG1pblNlcnZlcgAthBoAAQAQX1dMU19BZG1pblNlcnZlcng=, ServerName=JMSServer-0, Topic=false, VersionNumber=1}) -r-- DestinationType Queue -r-- DurableSubscribers null -r-- InsertionPaused false -r-- InsertionPausedState Insertion-Enabled -r-- MessagesCurrentCount 0 -r-- MessagesDeletedCurrentCount 3 -r-- MessagesHighCount 2 -r-- MessagesMovedCurrentCount 0 -r-- MessagesPendingCount 0 -r-- MessagesReceivedCount 3 -r-- MessagesThresholdTime 0 -r-- Name SystemModule-0!Queue-0 -r-- Paused false -r-- ProductionPaused false -r-- ProductionPausedState Production-Enabled -r-- State advertised_in_cluster_jndi -r-- Type JMSDestinationRuntime   -r-x closeCursor Void : String(cursorHandle) -r-x deleteMessages Integer : String(selector) -r-x getCursorEndPosition Long : String(cursorHandle) -r-x getCursorSize Long : String(cursorHandle) -r-x getCursorStartPosition Long : String(cursorHandle) -r-x getItems javax.management.openmbean.CompositeData[] : String(cursorHandle),Long(start),Integer(count) -r-x getMessage javax.management.openmbean.CompositeData : String(cursorHandle),Long(messageHandle) -r-x getMessage javax.management.openmbean.CompositeData : String(cursorHandle),String(messageID) -r-x getMessage javax.management.openmbean.CompositeData : String(messageID) -r-x getMessages String : String(selector),Integer(timeout) -r-x getMessages String : String(selector),Integer(timeout),Integer(state) -r-x getNext javax.management.openmbean.CompositeData[] : String(cursorHandle),Integer(count) -r-x getPrevious javax.management.openmbean.CompositeData[] : String(cursorHandle),Integer(count) -r-x importMessages Void : javax.management.openmbean.CompositeData[],Boolean(replaceOnly) -r-x moveMessages Integer : String(java.lang.String),javax.management.openmbean.CompositeData,Integer(java.lang.Integer) -r-x moveMessages Integer : String(selector),javax.management.openmbean.CompositeData -r-x pause Void : -r-x pauseConsumption Void : -r-x pauseInsertion Void : -r-x pauseProduction Void : -r-x preDeregister Void : -r-x resume Void : -r-x resumeConsumption Void : -r-x resumeInsertion Void : -r-x resumeProduction Void : -r-x sort Long : String(cursorHandle),Long(start),String[](fields),Boolean[](ascending)   wls:/hotspot_domain/serverRuntime/JMSRuntime/AdminServer.jms/JMSServers/JMSServer-0/Destinations/SystemModule-0!Queue-0> cmo.deleteMessages('') 2 where the domain name is “hotspot_domain”, the JMS Server name is “JMSServer-0”, the Queue name is “Queue-0” and the System Module is named “SystemModule-0”.  To invoke the operation, I use the “cmo” object, which is the “Current Management Object” that represents the currently navigated to MBean.  The 2 indicates that two messages were deleted.  Combining this WLST code with a recent post by my colleague Steve that shows you how to use an encrypted file to store the authentication credentials, you could easily turn this into a secure automated script.  If you need help with that step, a long while back I blogged about some WLST basics.  Happy scripting.

    Read the article

  • SQLAuthority News – #TechEdIn – TechEd India 2012 Memories and Photos

    - by pinaldave
    TechEd India 2012 was held in Bangalore last March 21 to 23, 2012. Just like every year, this event is bigger, grander and inspiring. Pinal Dave at TechEd India 2012 Family Event Every single year, TechEd is a special affair for my entire family.  Four months before the start of TechEd, I usually start to build the mental image of the event. I start to think  about various things. For the most part, what excites me most is presenting a session and meeting friends. Seriously, I start thinking about presenting my session 4 months earlier than the event!  I work on my presentation day and night. I want to make sure that what I present is accurate and that I have experienced it firsthand. My wife and my daughter also contribute to my efforts. For us, TechEd is a family event, and the two of them feel equally responsible as well. They give up their family time so I can bring out the best content for the Community. Pinal, Shaivi and Nupur at TechEd India 2012 Guinea Pigs (My Experiment Victims) I do not rehearse my session, ever. However, I test my demo almost every single day till the last moment that I have to present it already. I sometimes go over the demo more than 2-3 times a day even though the event is more than a month away. I have two “guinea pigs”: 1) Nupur Dave and 2) Vinod Kumar. When I am at home, I present my demos to my wife Nupur. At times I feel that people often backup their demo, but in my case, I have backup demo presenters. In the office during lunch time, I present the demos to Vinod. I am sure he can walk my demos easily with eyes closed. Pinal and Vinod at TechEd India 2012 My Sessions I’ve been determined to present my sessions in a real and practical manner. I prefer to present the subject that I myself would be eager to attend to and sit through if I were an audience. Just keeping that principle in mind, I have created two sessions this year. SQL Server Misconception and Resolution Pinal and Vinod at TechEd India 2012 We believe all kinds of stuff – that the earth is flat, or that the forbidden fruit is apple, or that the big bang theory explains the origin of the universe, and so many other things. Just like these, we have plenty of misconceptions in SQL Server as well. I have had this dream of co-presenting a session with Vinod Kumar for the past 3 years. I have been asking him every year if we could present a session together, but we never got it to work out, until this year came. Fortunately, we got a chance to stand on the same stage and present a single subject.  I believe that Vinod Kumar and I have an excellent synergy when we are working together. We know each other’s strengths and weakness. We know when the other person will speak and when he will keep quiet. The reason behind this synergy is that we have worked on 2 Video Learning Courses (SQL Server Indexes and SQL Server Questions and Answers) and authored 1 book (SQL Server Questions and Answers) together. Crowd Outside Session Hall This session was inspired from the “Laurel and Hardy” show so we performed a role-playing of those famous characters. We had an excellent time at the stage and, for sure, the audience had a wonderful time, too. We had an extremely large audience for this session and had a great time interacting with them. Speed Up! – Parallel Processes and Unparalleled Performance Pinal Dave at TechEd India 2012 I wanted to approach this session at level 400 and I was very determined to do so. The biggest challenge I had was that this was a total of 60 minutes of session and the audience profile was very generic. I had to present at level 100 as well at 400. I worked hard to tune up these demos. I wanted to make sure that my messages would land perfectly to the minds of the attendees, and when they walk out of the session, they could use the knowledge I shared on their servers. After the session, I felt an extreme satisfaction as I received lots of positive feedback at the event. At one point, so many people rushed towards me that I was a bit scared that the stage might break and someone would get injured. Fortunately, nothing like that happened and I was able to shake hands with everybody. Pinal Dave at TechEd India 2012 Crowd rushing to Pinal at TechEd India 2012 Networking This is one of the primary reasons many of us visit the annual TechEd event. I had a fantastic time meeting SQL Server enthusiasts. Well, it was a terrific time meeting old friends, user group members, MVPs and SQL Enthusiasts. I have taken many photographs with lots of people, but I have received a very few back. If you are reading this blog and have a photo of us at the event, would you please send it to me so I could keep it in my memory lane? SQL Track Speaker: Jacob and Pinal at TechEd India 2012 SQL Community: Pinal, Tejas, Nakul, Jacob, Balmukund, Manas, Sudeepta, Sahal at TechEd India 2012 Star Speakers: Amit and Balmukund at TechEd India 2012 TechED Rockstars: Nakul, Tejas and Pinal at TechEd India 2012 I guess TechEd is a mix of family affair and culture for me! Hamara TechEd (Our TechEd) Please tell me which photo you like the most! Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, SQLAuthority News, SQLServer, T SQL, Technology Tagged: TechEd, TechEdIn

    Read the article

  • Reflections on GiveCamp

    - by Reed
    I participated in the Seattle GiveCamp over the weekend, and am entirely impressed.  GiveCamp is a great event – I especially like how rewarding it is for everybody involved.  I strongly encourage any and all developers to watch for future GiveCamp events, and consider participating, for many reasons… GiveCamp provides real value to organizations that truly need help.  The Seattle event alone succeeded in helping sixteen non-profit organizations in many different ways.  The projects involved varied dramatically, including website redesigns, SEO, reworking data management workflows, and even game development.  Many non-profits have a strong need for good, quality technical help.  However, nearly every non-profit organization has an incredibly limited budget.  GiveCamp is a way to really give back, and provide incredibly valuable help to organizations that truly benefit. My experience has shown many developers to be incredibly generous – this is a chance to dedicate your energy to helping others in a way that really takes advantage of your expertise.  Your time as a developer is incredibly valuable, and this puts something of incredible value directly into the hands of places its needed. First, and foremost, GiveCamp is about providing technical help to non-profit organizations in need. GiveCamp can make you a better developer.  This is a fantastic opportunity for us, as developers, to work with new people, in a new setting.  The incredibly short time frame (one weekend for a deliverable project) and intense motivation to succeed provides a huge opportunity for learning from peers.  I’d personally like to thank off the developers with whom I worked – I learned something from each and every one of you.  I hope to see and work with all of you again someday. GiveCamp provides an opportunity for you to work outside of your comfort zone. While it’s always nice to be an expert, it’s also valuable to work on a project where you have little or no direct experience.  My team focused on a complete reworking of our organizations message and a complete new website redesign and deployment using WordPress.  While I’d used WordPress for my blog, and had some experience, this is completely unrelated to my professional work.  In fact, nobody on our team normally worked directly with the technologies involved – yet together we managed to succeed in delivering our goals.  As developers, it’s easy to want to stay abreast of new technology surrounding our expertise, but its rare that we get a chance to sit down and work on something practical that is completely outside of our normal realm of work.  I’m a desktop developer by trade, and spent much of the weekend working with CSS and Photoshop.  Many of the projects organizations need don’t match perfectly with the skill set in the room – yet all of the software professionals rose to the occasion and delivered practical, usable applications. GiveCamp is a short term, known commitment. While this seems obvious, I think it’s an important aspect to remember.  This is a huge part of what makes it successful – you can work, completely focused, on a project, then walk away completely when you’re done.  There is no expectation of continued involvement.  While many of the professionals I’ve talked to are willing to contribute some amount of their time beyond the camp, this is not expected. The freedom this provides is immense.  In addition, the motivation this brings is incredibly valuable.  Every developer in the room was very focused on delivering in time – you have one shot to get it as good as possible, and leave it with the organization in a way that can be maintained by them.  This is a rare experience – and excellent practice at time management for everyone involved. GiveCamp provides a great way to meet and network with your peers. Not only do you get to network with other software professionals in your area – you get to network with amazing people.  Every single person in the room is there to try to help people.  The balance of altruism, intelligence, and expertise in the room is something I’ve never before experienced. During the presentations of what was accomplished, I felt blessed to participate.  I know many people in the room were incredibly touched by the level of dedication and accomplishment over the weekend. GiveCamp is fun. At the end of the experience, I would have signed up again, even if it was a painful, tedious weekend – merely due to the amazing accomplishments achieved throughout the event.  However, the event is fun.  Everybody I talked to, the entire weekend, was having a good time.  While there were many faces focused into a near grimace at times (including mine, I’ll admit), this was always in response to a particularly challenging problem or task.  The challenges just added to the overall enjoyment of the weekend – part of why I became a developer in the first place is my love for challenge and puzzles, and a short deadline using unfamiliar technology provided plenty of opportunity for puzzles.  As soon as people would stand up, it was another smile.   If you’re a developer, I’d recommend looking at GiveCamp more closely.  Watch for an event in your area.  If there isn’t one, consider building a team and organizing an event.  The experience is worth the commitment. 

    Read the article

  • Go From Social Glum to Guru at the Social Media Rally Station @ OOW

    - by Kristin Rose
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} @OPN Partners,We have some #exciting news for you! Just when you thought Oracle OpenWorld #OOW couldn’t get any better; OPN wants to announce a little something called the Social Media Rally Station™. #OMG!Enough with the social talk, hash tags and @’s, since there will be plenty of that at Oracle OpenWorld! This awesome station full of experts is the opportunity you've been looking for to optimize your online presence. You’ll start by receiving an overall evaluation of where you stand online, and get customized, face-to-face, expert advice on how to better engage with your customers and find new prospects online! Here’s what will happen at the Social Media Rally Stations: Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} Partners will check in with a Rally Coordinator who will assess your needs and move you to the appropriate station. You will take part in a Professional Photo Station where you’ll get a head shot to use on social profiles, your own website, or for articles and posts about your company. Finally, the One-2-One Station Consultants will walk you through how you’re using social media today and next steps including, Google Alerts, Google Analytics, Search Engine Optimization, LinkedIn, Twitter, Facebook, Google+ and more. Finally, this is a custom engagement so you can decide how you want to focus the time. Go from Social Media glum to guru in under 25 minutes! Oh and a few other things to remember… Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} These Social Media Rally Stations will be taking place on: Sunday, 9/30 from 3-5 p.m.PT at the Esplanade level, Moscone South and Monday, 10/1 from 10 a.m. – 6 p.m. PT at the OPN Lounge in Moscone South, Exhibit Hall Level Please wear professional attire from the waist up for your head-shot Bring any login info for your social platforms Come prepared with questions for our One-2-One Consultants! If you have any questions before the hitting the ground running at the Social Media Station™ sponsored by Oracle and provided by Channel Maven Consulting, or if you’d like to schedule some time while you’re at Oracle OpenWorld, send an email to [email protected]. Oh and don’t forget to RT this post on Twitter and ‘like’ us on Facebook to spread the word! #Thanks!See you around the social-sphere,#OPN

    Read the article

  • How to nest transactions nicely - &quot;begin transaction&quot; vs &quot;save transaction&quot; and SQL Server

    - by Brian Biales
    Do you write stored procedures that might be used by others?  And those others may or may not have already started a transaction?  And your SP does several things, but if any of them fail, you have to undo them all and return with a code indicating it failed? Well, I have written such code, and it wasn’t working right until I finally figured out how to handle the case when we are already in a transaction, as well as the case where the caller did not start a transaction.  When a problem occurred, my “ROLLBACK TRANSACTION” would roll back not just my nested transaction, but the caller’s transaction as well.  So when I tested the procedure stand-alone, it seemed to work fine, but when others used it, it would cause a problem if it had to rollback.  When something went wrong in my procedure, their entire transaction was rolled back.  This was not appreciated. Now, I knew one could "nest" transactions, but the technical documentation was very confusing.  And I still have not found the approach below documented anywhere.  So here is a very brief description of how I got it to work, I hope you find this helpful. My example is a stored procedure that must figure out on its own if the caller has started a transaction or not.  This can be done in SQL Server by checking the @@TRANCOUNT value.  If no BEGIN TRANSACTION has occurred yet, this will have a value of 0.  Any number greater than zero means that a transaction is in progress.  If there is no current transaction, my SP begins a transaction. But if a transaction is already in progress, my SP uses SAVE TRANSACTION and gives it a name.  SAVE TRANSACTION creates a “save point”.  Note that creating a save point has no effect on @@TRANCOUNT.  So my SP starts with something like this: DECLARE @startingTranCount int SET @startingTranCount = @@TRANCOUNT IF @startingTranCount > 0 SAVE TRANSACTION mySavePointName ELSE BEGIN TRANSACTION -- … Then, when ready to commit the changes, you only need to commit if we started the transaction ourselves: IF @startingTranCount = 0 COMMIT TRANSACTION And finally, to roll back just your changes so far: -- Roll back changes... IF @startingTranCount > 0 ROLLBACK TRANSACTION MySavePointName ELSE ROLLBACK TRANSACTION Here is some code that you can try that will demonstrate how the save points work inside a transaction. This sample code creates a temporary table, then executes selects and updates, documenting what is going on, then deletes the temporary table. if running in SQL Management Studio, set Query Results to: Text for best readability of the results. -- Create a temporary table to test with, we'll drop it at the end. CREATE TABLE #ATable( [Column_A] [varchar](5) NULL ) ON [PRIMARY] GO SET NOCOUNT ON -- Ensure just one row - delete all rows, add one DELETE #ATable -- Insert just one row INSERT INTO #ATable VALUES('000') SELECT 'Before TRANSACTION starts, value in table is: ' AS Note, * FROM #ATable SELECT @@trancount AS CurrentTrancount --insert into a values ('abc') UPDATE #ATable SET Column_A = 'abc' SELECT 'UPDATED without a TRANSACTION, value in table is: ' AS Note, * FROM #ATable BEGIN TRANSACTION SELECT 'BEGIN TRANSACTION, trancount is now ' AS Note, @@TRANCOUNT AS TranCount UPDATE #ATable SET Column_A = '123' SELECT 'Row updated inside TRANSACTION, value in table is: ' AS Note, * FROM #ATable SAVE TRANSACTION MySavepoint SELECT 'Save point MySavepoint created, transaction count now:' as Note, @@TRANCOUNT AS TranCount UPDATE #ATable SET Column_A = '456' SELECT 'Updated after MySavepoint created, value in table is: ' AS Note, * FROM #ATable SAVE TRANSACTION point2 SELECT 'Save point point2 created, transaction count now:' as Note, @@TRANCOUNT AS TranCount UPDATE #ATable SET Column_A = '789' SELECT 'Updated after point2 savepoint created, value in table is: ' AS Note, * FROM #ATable ROLLBACK TRANSACTION point2 SELECT 'Just rolled back savepoint "point2", value in table is: ' AS Note, * FROM #ATable ROLLBACK TRANSACTION MySavepoint SELECT 'Just rolled back savepoint "MySavepoint", value in table is: ' AS Note, * FROM #ATable SELECT 'Both save points were rolled back, transaction count still:' as Note, @@TRANCOUNT AS TranCount ROLLBACK TRANSACTION SELECT 'Just rolled back the entire transaction..., value in table is: ' AS Note, * FROM #ATable DROP TABLE #ATable The output should look like this: Note                                           Column_A ---------------------------------------------- -------- Before TRANSACTION starts, value in table is:  000 CurrentTrancount ---------------- 0 Note                                               Column_A -------------------------------------------------- -------- UPDATED without a TRANSACTION, value in table is:  abc Note                                 TranCount ------------------------------------ ----------- BEGIN TRANSACTION, trancount is now  1 Note                                                Column_A --------------------------------------------------- -------- Row updated inside TRANSACTION, value in table is:  123 Note                                                   TranCount ------------------------------------------------------ ----------- Save point MySavepoint created, transaction count now: 1 Note                                                   Column_A ------------------------------------------------------ -------- Updated after MySavepoint created, value in table is:  456 Note                                              TranCount ------------------------------------------------- ----------- Save point point2 created, transaction count now: 1 Note                                                        Column_A ----------------------------------------------------------- -------- Updated after point2 savepoint created, value in table is:  789 Note                                                     Column_A -------------------------------------------------------- -------- Just rolled back savepoint "point2", value in table is:  456 Note                                                          Column_A ------------------------------------------------------------- -------- Just rolled back savepoint "MySavepoint", value in table is:  123 Note                                                        TranCount ----------------------------------------------------------- ----------- Both save points were rolled back, transaction count still: 1 Note                                                            Column_A --------------------------------------------------------------- -------- Just rolled back the entire transaction..., value in table is:  abc

    Read the article

  • Kill a tree, save your website? Content strategy in action, part III

    - by Roger Hart
    A lot has been written about how driving content strategy from within an organisation is hard. And that's true. Red Gate is pretty receptive to new ideas, so although I've not had a total walk in the park, it's been a hike with charming scenery. But I'm one of the lucky ones. Lots of people are involved in content, and depending on your organisation some of those people might be the kind who'll gleefully call themselves "stakeholders". People holding a stake generally want to stick it through something's heart and bury it at a crossroads. Winning them over is not always easy. (Richard Ingram has made a nice visual summary of how this can feel - Content strategy Snakes & ladders - pdf ) So yes, a lot of content strategy advocates are having a hard time. And sure, we've got a nice opportunity to get together and have a hug and a cry, but in the interim we could use a hand. What to do? My preferred approach is, I'll confess, brutal. I'd like nothing so much as to take a scorched earth approach to our website. Burn it, salt the ground, and build the new one right: focusing on clearly delineated business and user content goals, and instrumented so we can tell if we're doing it right. I'm never getting buy-in for that, but a boy can dream. So how about just getting buy-in for some small, tenable improvements? Easier, but still non-trivial. I sat down for a chat with our marketing and design guys. It seemed like a good place to start, even if they weren't up for my "Ctrl-A + Delete"  solution. We talked through some of this stuff, and we pretty much agreed that our content is a bit more broken than we'd ideally like. But to get everybody on board, the problems needed visibility. Doing a visual content inventory Print out the internet. Make a Wall Of Content. Seriously. If you've already done a content inventory, you know your architecture, and you know the scale of the problem. But it's quite likely that very few other people do. So make it big and visual. I'm going to carbon hell, but it seems to be working. This morning, I printed out a tiny, tiny part of our website: the non-support content pertaining to SQL Compare I made big, visual, A3 blowups of each page, and covered a wall with them. A page per web page, spread over something like 6M x 2M, with metrics, right in front of people. Even if nobody reads it (and they are doing) the sheer scale is shocking. 53 pages, all told. Some are redundant, some outdated, some trivial, a few fantastic, and frighteningly many that are great ideas delivered not-quite-right. You have to stand quite far away to get it all in your field of vision. For a lot of today, a whole bunch of folks have been gawping in amazement, talking each other through it, peering at the details, and generally getting excited about content. Developers, sales guys, our CEO, the marketing folks - they're engaged. Will it last? I make no promises. But this sort of wave of interest is vital to getting a content strategy project kicked off. While the content strategist is a saucer-eyed orphan in the cupboard under the stairs, they're not getting a whole lot done. Of course, just printing the site won't necessarily cut it. You have to know your content, and be able to talk about it. Ideally, you'll also have page view and time-on-page metrics. One of the most powerful things you can do is, when people are staring at your wall of content, ask them what they think half of it is for. Pretty soon, you've made a case for content strategy. We're also going to get folks to mark it up - cover it with notes and post-its, let us know how they feel about our content. I'll be blogging about how that goes, but it's exciting. Different business functions have different needs from content, so the more exposure the content gets, and the more feedback, the more you know about those needs. Fingers crossed for awesome.

    Read the article

  • Welcome to Jackstown

    - by fatherjack
    I live in a small town, the population count isn't that great but let me introduce you to some of the population. We'll start with Martin the Doc, he fixes up anything that gets poorly, so much so that he could be classed as the doctor, the vet and even the garage mechanic. He's got a reputation that he can fix anything and that hasn't been proved wrong yet. He's great friends with Brian (who gets called "Brains") the teacher who seems to have a sound understanding of any topic you care to pass his way. If he isn't sure he tells you and then goes to find out and comes back with a full answer real quick. Its good to have that sort of research capability close at hand. Brains is also great at encouraging anyone who needs a bit of support to get them up to speed and working on their jobs. Steve sees Brains regularly, that's because he is the librarian, he keeps all sorts of reading material and nowadays there's even video to watch about any topic you like. Steve keeps scouring all sorts of places to get the content that's needed and he keeps it in good order so that what ever is needed can be found quickly. He also has to make sure that old stuff gets marked as probably out of date so that anyone reading it wont get mislead. Over the road from him is Greg, he's the town crier. We don't have a newspaper here so Greg keeps us all informed of what's going on "out of town" - what new stuff we might make use of and what wont work in a small place like this. If we are interested he goes ahead and gets people in to demonstrate their products  and tell us about the details. Greg is pretty good at getting us discounts too. Now Greg's brother Ian works for the mayors office in the "waste management department" nowadays its all about the recycling but he still has to make sure that the stuff that cant be used any more gets disposed of properly. It depends on the type of waste he's dealing with that decides how it need to be treated and he has to know a lot about the different methods and when to use which ones. There are two people that keep the peace in town, Brent is the detective, investigating wrong doings and applying justice where necessary and Bart is the diplomat who smooths things over when any people have a dispute or disagreement. Brent is meticulous in his investigations and fair in the way he handles any situation he finds. Discretion is his byword. There's a rumour that Bart used to work for the United Nations but what ever his history there is no denying his ability to get apparently irreconcilable parties working together to their combined benefit. Someone who works closely with Bart is Brad, he is the translator in town. He has several languages that he can converse in but he can also explain things from someone's point of view or  and make it understandable to someone else. To keep things on the straight and narrow from a legal perspective is Ben the solicitor, making sure we all abide by the rules.Two people who make for an interesting evening's conversation if you get them together are Aaron and Grant, Aaron is the local planning inspector and Grant is an inventor of some reputation. Anything being constructed around here needs Aarons agreement. He's quite flexible in his rules though; if you can justify what you want to do with solid logic but he wont stand for any development going on without his inclusion. That gets a demolition notice and there's no argument. Grant as I mentioned is the inventor in town, if something can be improved or created then Grant is your man. He mainly works on his own but isnt averse to getting specific advice and assistance from specialist from out of town if they can help him finish his creations.There aren't too many people left for you to meet in the town, there's Rob, he's an ex professional sportsman. He played Hockey, Football, Cricket, you name it. He was in his element as goal keeper / wicket keeper and that shows in his personal life. He just goes about his business and people often don't even know that he's helped them. Really low profile, doesn't get any glory but saves people from lots of problems, even disasters on occasion. There goes Neil, he's a bit of an odd person, some people say he's gifted with special clairvoyant powers, personally I think he's got his ear to the ground and knows where to find out the important news as soon as its made public. Anyone getting a visit from Neil is best off to follow his advice though, he's usually spot on and you wont be caught by surprise if you follow his recommendations – wherever it comes from.Poor old Andrew is the last person to introduce you to. Andrew doesn't show himself too often but when he does it seems that people find a reason to blame him for their problems, whether he had anything to do with their predicament or not. In all honesty, without fail, and to his great credit, he takes it in good grace and never retaliates or gets annoyed when he's out and about.  It pays off too as its very often the case that those who were blaming him recently suddenly find they need his help and they readily forget the issues pretty rapidly.And then there's me, what do I do in town? Well, I'm just a DBA with a lot of hats. (Jackstown Pop. 1)

    Read the article

  • A Semantic Model For Html: TagBuilder and HtmlTags

    - by Ryan Ohs
    In this post I look into the code smell that is HTML literals and show how we can refactor these pesky strings into a friendlier and more maintainable model.   The Problem When I started writing MVC applications, I quickly realized that I built a lot of my HTML inside HtmlHelpers. As I did this, I ended up moving quite a bit of HTML into string literals inside my helper classes. As I wanted to add more attributes (such as classes) to my tags, I needed to keep adding overloads to my helpers. A good example of this end result is the default html helpers that come with the MVC framework. Too many overloads make me crazy! The problem with all these overloads is that they quickly muck up the API and nobody can remember exactly what order the parameters go in. I've seen many presenters (including members of the ASP.NET MVC team!) stumble before realizing that their view wasn't compiling because they needed one more null parameter in the call to Html.ActionLink(). What if instead of writing Html.ActionLink("Edit", "Edit", null, new { @class = "navigation" }) we could do Html.LinkToAction("Edit").Text("Edit").AddClass("navigation") ? Wouldn't that be much easier to remember and understand?  We can do this if we introduce a semantic model for building our HTML.   What is a Semantic Model? According to Martin Folwer, "a semantic model is an in-memory representation, usually an object model, of the same subject that the domain specific language describes." In our case, the model would be a set of classes that know how to render HTML. By using a semantic model we can free ourselves from dealing with strings and instead output the HTML (typically via ToString()) once we've added all the elements and attributes we desire to the model. There are two primary semantic models available in ASP.NET MVC: MVC 2.0's TagBuilder and FubuMVC's HtmlTags.   TagBuilder TagBuilder is the html builder that is available in ASP.NET MVC 2.0. I'm not a huge fan but it gets the job done -- for simple jobs.  Here's an overview of how to use TagBuilder. See my Tips section below for a few comments on that example. The disadvantage of TagBuilder is that unless you wrap it up with our own classes, you still have to write the actual tag name over and over in your code. eg. new TagBuilder("div") instead of new DivTag(). I also think it's method names are a little too long. Why not have AddClass() instead of AddCssClass() or Text() instead of SetInnerText()? What those methods are doing should be pretty obvious even in the short form. I also don't like that it wants to generate an id attribute from your input instead of letting you set it yourself using external conventions. (See GenerateId() and IdAttributeDotReplacement)). Obviously these come from Microsoft's default approach to MVC but may not be optimal for all programmers.   HtmlTags HtmlTags is in my opinion the much better option for generating html in ASP.NET MVC. It was actually written as a part of FubuMVC but is available as a stand alone library. HtmlTags provides a much cleaner syntax for writing HTML. There are classes for most of the major tags and it's trivial to create additional ones by inheriting from HtmlTag. There are also methods on each tag for the common attributes. For instance, FormTag has an Action() method. The SelectTag class allows you to set the default option or first option independent from adding other options. With TagBuilder there isn't even an abstraction for building selects! The project is open source and always improving. I'll hopefully find time to submit some of my own enhancements soon.   Tips 1) It's best not to have insanely overloaded html helpers. Use fluent builders. 2) In html helpers, return the TagBuilder/tag itself (not a string!) so that you can continue to add attributes outside the helper; see my first sample above. 3) Create a static entry point into your builders. I created a static Tags class that gives me access all the HtmlTag classes I need. This way I don't clutter my code with "new" keywords. eg. Tags.Div returns a new DivTag instance. 4) If you find yourself doing something a lot, create an extension method for it. I created a Nest() extension method that reads much more fluently than the AddChildren() method. It also accepts a params array of tags so I can very easily nest many children.   I hope you have found this post helpful. Join me in my war against HTML literals! I’ll have some more samples of how I use HtmlTags in future posts.

    Read the article

  • ISACA Webcast follow up: Managing High Risk Access and Compliance with a Platform Approach to Privileged Account Management

    - by Darin Pendergraft
    Last week we presented how Oracle Privileged Account Manager (OPAM) could be used to manage high risk, privileged accounts.  If you missed the webcast, here is a link to the replay: ISACA replay archive (NOTE: you will need to use Internet Explorer to view the archive) For those of you that did join us on the call, you will know that I only had a little bit of time for Q&A, and was only able to answer a few of the questions that came in.  So I wanted to devote this blog to answering the outstanding questions.  Here they are. 1. Can OPAM track admin or DBA activity details during a password check-out session? Oracle Audit Vault is monitoring these activities which can be correlated to check-out events. 2. How would OPAM handle simultaneous requests? OPAM can be configured to allow for shared passwords.  By default sharing is turned off. 3. How long are the passwords valid?  Are the admins required to manually check them in? Password expiration can be configured and set in the password policy according to your corporate standards.  You can specify if you want forced check-in or not. 4. Can 2-factor authentication be used with OPAM? Yes - 2-factor integration with OPAM is provided by integration with Oracle Access Manager, and Oracle Adaptive Access Manager. 5. How do you control access to OPAM to ensure that OPAM admins don't override the functionality to access privileged accounts? OPAM provides separation of duties by using Admin Roles to manage access to targets and privileged accounts and to control which operations admins can perform. 6. How and where are the passwords stored in OPAM? OPAM uses Oracle Platform Security Services (OPSS) Credential Store Framework (CSF) to securely store passwords.  This is the same system used by Oracle Applications. 7. Does OPAM support hierarchical/level based privileges?  Is the log maintained for independent review/audit? Yes. OPAM uses the Fusion Middleware (FMW) Audit Framework to store all OPAM related events in a dedicated audit database.  8. Does OPAM support emergency access in the case where approvers are not available until later? Yes.  OPAM can be configured to release a password under a "break-glass" emergency scenario. 9. Does OPAM work with AIX? Yes supported UNIX version are listed in the "certified component section" of the UNIX connector guide at:http://docs.oracle.com/cd/E22999_01/doc.111/e17694/intro.htm#autoId0 10. Does OPAM integrate with Sun Identity Manager? Yes.  OPAM can be integrated with SIM using the REST  APIs.  OPAM has direct integration with Oracle Identity Manager 11gR2. 11. Is OPAM available today and what does it cost? Yes.  OPAM is available now.  Ask your Oracle Account Manager for pricing. 12. Can OPAM be used in SAP environments? Yes, supported SAP version are listed in the "certified component section" of the SAP  connector guide here: http://docs.oracle.com/cd/E22999_01/doc.111/e25327/intro.htm#autoId0 13. How would this product integrate, if at all, with access to a particular field in the DB that need additional security such as SSN's? OPAM can work with DB Vault and DB Firewall to provide the fine grained access control for databases. 14. Is VM supported? As a deployment platform Oracle VM is supported. For further details about supported Virtualization Technologies see Oracle Fusion Middleware Supported System configurations here: http://www.oracle.com/technetwork/middleware/ias/downloads/fusion-certification-100350.html 15. Where did this (OPAM) technology come from? OPAM was built by Oracle Engineering. 16. Are all Linux flavors supported?  How about BSD? BSD is not supported. For supported UNIX version see the "certified component section" of the UNIX connector guide http://docs.oracle.com/cd/E22999_01/doc.111/e17694/intro.htm#autoId0 17. What happens if users don't check passwords in at the end of a work task? In OPAM a time frame can be defined how long a password can be checked out. The security admin can force a check-in at any given time. 18. is MySQL supported? Yes, supported DB version are listed in the "certified component section" of the DB connector guide here: http://docs.oracle.com/cd/E22999_01/doc.111/e28315/intro.htm#BABGJJHA 19. What happens when OPAM crashes and you need to use the password? OPAM can be configured for high availability, but if required, OPAM data can be backed up/recovered.  See the OPAM admin guide. 20. Is OPAM Standalone product or does it leverage other components from IDM? OPAM can be run stand-alone, but will also leverage other IDM components

    Read the article

  • PeopleSoft at Alliance 2012 Executive Forum

    - by John Webb
    Guest Posting From Rebekah Jackson This week I jointed over 4,800 Higher Ed and Public Sector customers and partners in Nashville at our annual Alliance conference.   I got lost easily in the hallways of the sprawling Gaylord Opryland Hotel. I carried the resort map with me, and I would still stand for several minutes at a very confusing junction, studying the map and the signage on the walls. Hallways led off in many directions, some with elevators going down here and stairs going up there. When I took a wrong turn I would instantly feel stuck, lose my bearings, and occasionally even have to send out a call for help.    It strikes me that the theme for the Executive Forum this year outlines a less tangible but equally disorienting set of challenges that our higher education customer’s CIOs are facing: Making Decisions at the Intersection of Business Value, Strategic Investment, and Enterprise Technology. The forces acting upon higher education institutions today are not neat, straight-forward decision points, where one can glance to the right, glance to the left, and then quickly choose the best course of action. The operational, technological, and strategic factors that must be considered are complex, interrelated, messy…and the stakes are high. Michael Horn, co-author of “Disrupting Class: How Disruptive Innovation Will Change the Way the World Learns”, set the tone for the day. He introduced the model of disruptive innovation, which grew out of the research he and his colleagues have done on ‘Why Successful Organizations Fail’. Highly simplified, the pattern he shared is that things start out decentralized, take a leap to extreme centralization, and then experience progressive decentralization. Using computers as an example, we started with a slide rule, then developed the computer which centralized in the form of mainframes, and gradually decentralized to mini-computers, desktop computers, laptops, and now mobile devices. According to Michael, you have more computing power in your cell phone than existed on the planet 60 years ago, or was on the first rocket that went to the moon. Applying this pattern to Higher Education means the introduction of expensive and prestigious private universities, followed by the advent of state schools, then by community colleges, and now online education. Michael shared statistics that indicate 50% of students will be taking at least one on line course by 2014…and by some measures, that’s already the case today. The implication is that technology moves from being the backbone of the campus, the IT department’s domain, and pushes into the academic core of the institution. Innovative programs are underway at many schools like Bellevue and BYU Idaho, joined by startups and disruptive new players like the Khan Academy.   This presents both threat and opportunity for higher education institutions, and means that IT decisions cannot afford to be disconnected from the institution’s strategic plan. Subsequent sessions explored this theme.    Theo Bosnak, from Attain, discussed the model they use for assessing the complete picture of an institution’s financial health. Compounding the issue are the dramatic trends occurring in technology and the vendors that provide it. Ovum analyst Nicole Engelbert, shared her insights next and suggested that incremental changes are no longer an option, instead fundamental changes are affecting the landscape of enterprise technology in higher ed.    Nicole closed with her recommendation that institutions focus on the trends in higher education with an eye towards the strategic requirements and business value first. Technology then is the enabler.   The last presentation of the day was from Tom Fisher, Sr. Vice President of Cloud Services at Oracle. Tom runs the delivery arm of the Cloud Services group, and shared his thoughts candidly about his experiences with cloud deployments as well as key issues around managing costs and security in cloud deployments. Okay, we’ve covered a lot of ground at this point, from financials planning, business strategy, and cloud computing, with the possibility that half of the institutions in the US might not be around in their current form 10 years from now. Did I forget to mention that was raised in the morning session? Seems a little hard to believe, and yet Michael Horn made a compelling point. Apparently 100 years ago, 8 of the top 10 education institutions in the world were German. Today, the leading German school is ranked somewhere in the 40’s or 50’s. What will the landscape be 100 years from now? Will there be an institution from China, India, or Brazil in the top 10? As Nicole suggested, maybe US parents will be sending their children to schools overseas much sooner, faced with the ever-increasing costs of a US based education. Will corporations begin to view skill-based certification from an online provider as a viable alternative to a 4 year degree from an accredited institution, fundamentally altering the education industry as we know it?

    Read the article

  • Interview with Geoff Bones, developer on SQL Storage Compress

    - by red(at)work
    How did you come to be working at Red Gate? I've been working at Red Gate for nine months; before that I had been at a multinational engineering company. A number of my colleagues had left to work at Red Gate and spoke very highly of it, but I was happy in my role and thought, 'It can't be that great there, surely? They'll be back!' Then one day I visited to catch up them over lunch in the Red Gate canteen. I was so impressed with what I found there, that, three days later, I'd applied for a role as a developer. And how did you get into software development? My first job out of university was working as a systems programmer on IBM mainframes. This was quite a while ago: there was a lot of assembler and loading programs from tape drives and that kind of stuff. I learned a lot about how computers work, and this stood me in good stead when I moved over the development in the 90s. What's the best thing about working as a developer at Red Gate? Where should I start? One of the great things as a developer at Red Gate is the useful feedback and close contact we have with the people who use our products, either directly at trade shows and other events or through information coming through the product managers. The company's whole ethos is built around assisting the user, and this is in big contrast to my previous development roles. We aim to produce tools that people really want to use, that they enjoy using, and, as a developer, this is a great thing to aim for and a great feeling when we get it right. At Red Gate we also try to cut out the things that distract and stop us doing our jobs. As a developer, this means that I can focus on the code and the product I'm working on, knowing that others are doing a first-class job of making sure that the builds are running smoothly and that I'm getting great feedback from the testers. We keep our process light and effective, as we want to produce great software more than we want to produce great audit trails. Tell us a bit about the products you are currently working on. You mean HyperBac? First let me explain a bit about what HyperBac is. At heart it's a compression and encryption technology, but with a few added features that open up a wealth of really exciting possibilities. Right now we have the HyperBac technology in just three products: SQL HyperBac, SQL Virtual Restore and SQL Storage Compress, but we're only starting to develop what it can do. My personal favourite is SQL Virtual Restore; for example, I love the way you can use it to run independent test databases that are all backed by a single compressed backup. I don't think the market yet realises the kind of things you do once you are using these products. On the other hand, the benefits of SQL Storage Compress are straightforward: run your databases but use only 20% of the disk space. Databases are getting larger and larger, and, as they do, so does your ROI. What's a typical day for you? My days are pretty varied. We have our daily team stand-up meeting and then sometimes I will work alone on a current issue, or I'll be pair programming with one of my colleagues. From time to time we give half a day up to future planning with the team, when we look at the long and short term aims for the product and working out the development priorities. I also get to go to conferences and events, which is unusual for a development role and gives me the chance to meet and talk to our customers directly. Have you noticed anything different about developing tools for DBAs rather than other IT kinds of user? It seems to me that DBAs are quite independent minded; they know exactly what the problem they are facing is, and often have a solution in mind before they begin to look for what's on the market. This means that they're likely to cherry-pick tools from a range of vendors, picking the ones that are the best fit for them and that disrupt their environments the least. When I've met with DBAs, I've often been very impressed at their ability to summarise their set up, the issues, the obstacles they face when implementing a tool and their plans for their environment. It's easier to develop products for this audience as they give such a detailed overview of their needs, and I feel I understand their problems.

    Read the article

  • Cowboy Agile?

    - by Robert May
    In a previous post, I outlined the rules of Scrum.  This post details one of those rules. I’ve often heard similar phrases around Scrum that clue me in to someone who doesn’t understand Scrum.  The phrases go something like this: “We don’t do Agile because the idea of letting people just do whatever they want is wrong.  We believe in a more structured approach.” (i.e. Work is Prison, and I’m the Warden!) “I love Agile.  Agile lets us do whatever we want!” (Cowboy Agile?) “We’re Agile, but we use a process that I’ve created.” (Cowboy Agile?) All of those phrases have one thing in common:  The assumption that Agile, and I mean Scrum, lets you do whatever you want.  This is simply not true. Executing Scrum properly requires more dedication, rigor, and diligence than happens in most traditional development methods. Scrum and Waterfall Compared Since Scrum and Waterfall are two of the most commonly used methodologies, a little bit of contrasting and comparing is in order. Waterfall Scrum A project manager defines all tasks and then manages the tasks that team members are working on. The team members define the tasks and estimates of the stories for the current iteration.  Any team member may work on any task in the iteration. Usually only a few milestones that need to be met, the milestones are measured in months, and these milestones are expected to be missed.  Little work is ever done to improve estimates and poor estimators can hide behind high estimates. Stories must be delivered every iteration, milestones are measured in hours, and the team is expected to figure out why their estimates were wrong, even when they were under.  Repeated misses can get the entire team fired. Partially completed work is normal. Partially completed work doesn’t count. Nobody knows the task you’re working on. Everyone knows what you’re working on, whether or not you’re making progress and how much longer you think its going to take, in hours. Little requirement to show working code.  Prototypes are ok. Working code must be shown each iteration.  No smoke and mirrors allowed.  Testing is done in lengthy cycles at the end of development.  Developers aren’t held accountable. Testing is part of the team.  If the testers don’t accept the story as complete, the team can’t count it.  Complete means that the story’s functionality works as designed.  The team can’t have any open defects on the story. Velocity is rarely truly measured and difficult to evaluate. Velocity is integral to the process and can be seen at a glance and everyone in the company knows what it is. A business analyst writes requirements.  Designers mock up screens.  Developers hide behind “I did it just like the spec doc told me to and made the screen exactly like the picture” Developers are expected to collaborate in real time.  If a design is bad or lacks needed details, the developers are required to get it right in the iteration, because all software must be functional.  Designers and Business Analysts are part of the team and must do their work in iterations slightly ahead of the developers. Upper Management is often surprised.  “You told me things were going well two months ago!” Management receives updates at the end of every iteration showing them exactly what the team did and how that compares to what' is remaining in the backlog.  Managers know every iteration what their money is buying. Status meetings are rare or don’t occur.  Email is a primary form of communication. Teams coordinate every single day with each other and use other high bandwidth communication channels to make sure they’re making progress.  Email is used only as a last resort.  Instead, team members stand up, walk to each other, and talk, face to face.  If that’s not possible, they pick up the phone. IF someone asks what happened, its at the end of a lengthy development cycle measured in months, and nobody really knows why it happened. Someone asks what happened every iteration.  The team talks about what happened, and then adapts to make sure that what happened either never happens again or happens every time.   That’s probably enough for now.  As you can see, a lot is required of Scrum teams! One of the key differences in Scrum is that the burden for many activities is shifted to a group of people who share responsibility, instead of a single person having responsibility.  This is a very good thing, since small groups usually come up with better and more insightful work than single individuals.  This shift also results in better velocity.  Team members can take vacations and the rest of the team simply picks up the slack.  With Waterfall, if a key team member takes a vacation, delays can ensue. Scrum requires much more out of every team member and as a result, Scrum teams outperform non-Scrum teams working 60 hour weeks. Recommended Reading Everyone considering Scrum should read Mike Cohn’s excellent book, User Stories Applied. Technorati Tags: Agile,Scrum,Waterfall

    Read the article

  • RDA Health Checks for SOA

    - by ShawnBailey
    What is a health check in RDA? A health check evaluates something in your environment to determine whether a change needs to be considered in order to avoid a problem or optimize fuctionality. Examples of what this 'something' might be are: Configuration Parameters JVM Options Runtime Statistics What have we done for SOA? In the latest release of RDA, 4.30, we have added a Rule Set for SOA called 'Oracle SOA 11g (11.1.1) Post Installation (Generic)'. This Rule Set contains 14 SOA related health checks. These checks were all derived from common issues / solutions we see in support of the SOA product. Many of the recommendations come from the product documentation while others are covered in the SOA Knowledge Base. Our goal is that you will be able to easily identify the areas of concern and understand the guidance available from the output of the Rule Set. Running the health checks for SOA The rules that the checks use are installed with RDA and bundled by product or functional area into what are called 'Rule Sets'. To view the available Rule Sets simply run the command from the RDA home location: rda.cmd (or .sh) -dT hcve This will bring up a list of the available HCVE (Health Check / Verification Engine) Rule Sets. Each Rule Set contains a group of related rules that are used for evalutation and display of results. A rule can be considered synonymous with a single health check and they are assigned an ID, Name and Description that can be seen when they are executed. The Rule Set for SOA is option number 11 and you just enter this selection at the prompt. The Rule Set will then execute to completion. After running an HCVE Rule Set the tool will write the output to the RDA_HOME/output folder. The simplest way to view the output is to drag the .htm file to a browser but of course it can also be uploaded to a Service Request for evaluation by Oracle Support. Many of the Rule Sets will prompt you for information before they can execute their rules but the SOA Rule Set will identify the SOA domains configured in your RDA setup.cfg file. This means that you don't need to answer all of the questions again about where stuff is but it also means that you must have configured RDA for SOA. To run the Rule Set: Download the latest version of RDA from MOS Doc ID 314422.1 Configure RDA for your SOA domains. Detailed steps can be found here In it's simplest form the command is 'rda.cmd (.sh) -S SOA' Go to the RDA home location and enter the command 'rda.cmd (or .sh) -dT hcve' Select option '11' It should be noted that this our first release of a SOA Rule Set so there will probably be some things we need to clean up or fix. None of these rules will actually modify anything on your system as they are read only and do the evaluations internally. Please let us know if you have any issues with the rules or ideas for new ones so we can make them as useful as possible. The Checks Here is a list of the SOA health checks by ID, Name and Description. ID Name Description A00100 SOA Domain Homes Lists the SOA domains that were indentified from the RDA setup.cfg file A00200 Coherence Protocol Conflict Checks to see if you have both Unicast and Multicast configured in the same domain. Checks both the setDomainEnv and config.xml entries (if it exists). We recommend Unicast with fully qualified host names or IP addresses. A00210 Coherence Fully Qualified Host Checks that the host names are fully qualified or that IP addresses are used. Will fail if unqualified host names are detected. A00220 Unicast Local Host Checks that the Coherence localhost is specified for use with Unicast A00300 JTA Timeout Checks that the JTA timeout is configured for the domain and lists the value. The bundled rule will only list the current values of the JTA timeout for each SOA Domain. In the future the rule with fail with a warning if the value is 300 seconds or lower. It is recommended that timeouts follow the pattern 'syncMaxWaitTime' < EJB Timeouts < JTA Timeout. The 300 second value is important because the EJB Timeouts default to 300 seconds. Additional information can be found in MOS Doc ID 880313.1. A00310 XA Max Time Checks that the JTA Maximum XA call time is set for the domain. Fails if it is not explicitly set or if the value is less than or equal to the default of 12000 ms. A00320 XA Timeout Checks that the XA timeout is enabled and that the value is '0' for the SOA Data Source (SOADataSource-jdbc.xml) A00330 JDBC Statement Timeout Checks that the Statement Timeout is set for all SOA Data Sources. Fails if the value is not set or if it is set to the default of -1. A00400 XA Driver Checks that the SOA Data Source is configured to use an XA driver. Fails if it is not. A00410 JDBC Capacity Settings Checks that the minimum and maximum capacity are equal for all SOA Data Sources. Fails if they are not and lists specifically which data sources failed. A00500 SOA Roles Checks that the default SOA roles 'SOAAdmin' and 'SOAOperator' are configured for the soa-infra application in the file sytem-jazn-data.xml. Fails if they are not. A00700 SOA-INFRA Deployment Checks that the soa-infra application is deployed to either a cluster, all members of a cluster or a stand alone server. A00710 SOA Deployments Checks that the SOA related applications are deployed to the same domain members as soa-infra. A00720 SOA Library Deployments Checks that the SOA related libraries are deployed to the same domain members as soa-infra. A00730 Data Source Deployments Checks that the SOA Data Sources are all targeted to the same domain members as soa-infra

    Read the article

  • Windows Azure Recipe: Software as a Service (SaaS)

    - by Clint Edmonson
    The cloud was tailor built for aspiring companies to create innovative internet based applications and solutions. Whether you’re a garage startup with very little capital or a Fortune 1000 company, the ability to quickly setup, deliver, and iterate on new products is key to capturing market and mind share. And if you can capture that share and go viral, having resiliency and infinite scale at your finger tips is great peace of mind. Drivers Cost avoidance Time to market Scalability Solution Here’s a sketch of how a basic Software as a Service solution might be built out: Ingredients Web Role – this hosts the core web application. Each web role will host an instance of the software and as the user base grows, additional roles can be spun up to meet demand. Access Control – this service is essential to managing user identity. It’s backed by a full blown implementation of Active Directory and allows the definition and management of users, groups, and roles. A pre-built ASP.NET membership provider is included in the training kit to leverage this capability but it’s also flexible enough to be combined with external Identity providers including Windows LiveID, Google, Yahoo!, and Facebook. The provider model provides extensibility to hook into other industry specific identity providers as well. Databases – nearly every modern SaaS application is backed by a relational database for its core operational data. If the solution is sold to organizations, there’s a good chance multi-tenancy will be needed. An emerging best practice for SaaS applications is to stand up separate SQL Azure database instances for each tenant’s proprietary data to ensure isolation from other tenants. Worker Role – this is the best place to handle autonomous background processing such as data aggregation, billing through external services, and other specialized tasks that can be performed asynchronously. Placing these tasks in a worker role frees the web roles to focus completely on user interaction and data input and provides finer grained control over the system’s scalability and throughput. Caching (optional) – as a web site traffic grows caching can be leveraged to keep frequently used read-only, user specific, and application resource data in a high-speed distributed in-memory for faster response times and ultimately higher scalability without spinning up more web and worker roles. It includes a token based security model that works alongside the Access Control service. Blobs (optional) – depending on the nature of the software, users may be creating or uploading large volumes of heterogeneous data such as documents or rich media. Blob storage provides a scalable, resilient way to store terabytes of user data. The storage facilities can also integrate with the Access Control service to ensure users’ data is delivered securely. Training & Examples These links point to online Windows Azure training labs and examples where you can learn more about the individual ingredients described above. (Note: The entire Windows Azure Training Kit can also be downloaded for offline use.) Windows Azure (16 labs) Windows Azure is an internet-scale cloud computing and services platform hosted in Microsoft data centers, which provides an operating system and a set of developer services which can be used individually or together. It gives developers the choice to build web applications; applications running on connected devices, PCs, or servers; or hybrid solutions offering the best of both worlds. New or enhanced applications can be built using existing skills with the Visual Studio development environment and the .NET Framework. With its standards-based and interoperable approach, the services platform supports multiple internet protocols, including HTTP, REST, SOAP, and plain XML SQL Azure (7 labs) Microsoft SQL Azure delivers on the Microsoft Data Platform vision of extending the SQL Server capabilities to the cloud as web-based services, enabling you to store structured, semi-structured, and unstructured data. Windows Azure Services (9 labs) As applications collaborate across organizational boundaries, ensuring secure transactions across disparate security domains is crucial but difficult to implement. Windows Azure Services provides hosted authentication and access control using powerful, secure, standards-based infrastructure. Developing Applications for the Cloud, 2nd Edition (eBook) This book demonstrates how you can create from scratch a multi-tenant, Software as a Service (SaaS) application to run in the cloud using the latest versions of the Windows Azure Platform and tools. The book is intended for any architect, developer, or information technology (IT) professional who designs, builds, or operates applications and services that run on or interact with the cloud. Fabrikam Shipping (SaaS reference application) This is a full end to end sample scenario which demonstrates how to use the Windows Azure platform for exposing an application as a service. We developed this demo just as you would: we had an existing on-premises sample, Fabrikam Shipping, and we wanted to see what it would take to transform it in a full subscription based solution. The demo you find here is the result of that investigation See my Windows Azure Resource Guide for more guidance on how to get started, including more links web portals, training kits, samples, and blogs related to Windows Azure.

    Read the article

  • Top ten things that don't make sense in The Walking Dead

    - by iamjames
    For those of you that don't know, The Walking Dead is a popular American TV show on AMC about a group of people trying to survive in a zombie-filled world.Here's the top ten eleven things that don't make sense on the show (and have never been explained) 1)  They never visit stores.  No Walmarts, Kmarts, Targets, shopping malls, pawn shops, gas stations, etc.  You'd think that would be the first place you'd visit for supplies, but they never have.  Not once.  There was a tiny corner store they visited in a small town, and while many products were already gone they did find several useful items.  2)  They never raid houses.  Why not?  One would imagine that they would want to search houses for useful items, but they don't.3)  They don't use 2 way radios.  Modern 2-way radios have a 36-mile range.  That's probably best possible range, but even if the range is only 10% of that, 3.6 miles, that's still more than enough for most situations, for the occasional "hey zombies attacking can you give me a hand?" or "there's zombies walking by stay inside until they leave" or "remember to pick up milk at the store love mom".  And yes they would need batteries or recharging, but they have been using gas-powered generators on the show and I'm sure a car charger would work.4)  They use gas-guzzling vehicles.  Every vehicle they have is from the 80s or 90s except for the new Kia SUV there for product placement.  Why?  They should all be driving new small SUVs or hybrids.  Visit a dealership and steal more fuel-efficient vehicles, because while the Walmart's might be empty from people raiding them for supplies, I'm sure most people weren't thinking "Gee, I should go car shopping" when the infection hit5)  They drive a motorcycle.  Seriously?  Let's find the least protective vehicle and drive that.  And while motorcycles get reasonable gas mileage, 5 people in a SUV gets better gas mileage per person than 5 people all driving motorcycles so it doesn't make economical sense either.6)  They drive loud vehicles.  The motorcycle used is commonly referred to as a chopper and is about as loud as a motorcycle can get.  The zombies are attracted to loud noise, so wouldn't it make more sense to drive vehicles that makes less sound?  Because as soon as you stop the bike and get off you're surrounded by zombies that heard you coming.  And it's not just the bike, the ~1980s Chevy SUV in the show is also very loud.7)  They never run out of food.  Seems like that would be a almost daily struggle, keeping enough food available for about a dozen people, yet I've never seen them visit a grocery store or local convenience store to stock up.8)  They don't carry swords, machetes, clubs, etc.  Let's face it, biting is not a very effective means of attack.  It's good for animals because they have fangs and little else, but humans have been finding better ways of killing each other since forever.  So why doesn't everyone on the show carry a sword or machete or at least a baseball bat?  Anything is better than wasting valuable bullets all the time.  Sure, dozen zombies approaching?  Shoot them.  One zombie approaching?  Save the bullet, cut off it's head.  9)  They do not wear protective clothing.  Human teeth are not exactly the sharpest teeth in the animal kingdom.  The leather shoes your dog ripped to shreds within minutes would probably take you days to bite through.  So why do they walk around half-naked?  Yes I know it's hot in Atlanta, but you'd think they'd at least have some tough leather coats or something for protection.  Maybe put a few small vent holes in the fabric if it's really hot.  Or better:  make your own chainmail.  Chainmail was used for thousands of years for protection from swords and is still used by scuba divers for protection from sharks.  If swords and sharks can't puncture it, human teeth don't stand a chance.  10)  They don't build barricades or dig trenches around properties.  In Season 2 they stayed at a farm in the middle of no where.  While being far away from people is a great way to stay far away from zombies, it would still make sense to build some sort of defenses.  Hordes of zombies would knock down almost any fence, but what about a trench or moat?  Maybe something not too wide so it can be jumped over easily but a zombie would fall into because I haven't seen too many jumping zombies on the show.  11)  They don't live in a mall or tall office building.  A mall would be perfect.  They have large security gates designed to keep even hundreds of people from breaking in and offer lots of supplies and food.  They're usually hundreds of thousands of square feet and fully enclosed, one could probably live their entire life happily in a mall.  Tall office building with on-site cafeteria would be another good choice.  They also usually offer good security and office furniture could be pushed out of the windows to crush approaching zombies, and the cafeteria is usually stocked to provide food for hundreds or thousands of office workers so food wouldn't be a problem for a long time. So there you have it, eleven things that don't make sense in The Walking Dead.  Have any of your own you'd like to add or were one of these things covered in the show?  Let me know in the comments.

    Read the article

  • Oracle participe au Forum MDM - 24 octobre 2013

    - by Louisa Aggoune
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Dédié aux Directions Générales, Fonctionnelles et Informatiques ce 2ème Forum MDM (Master Data Management) a pour objectif de présenter les dernières nouveautés et le savoir-faire des acteurs majeurs du marché sous la forme d'ateliers. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} ORACLE, sponsor de l'évènement, vous convie sur son stand et à son atelier: Oracle MDM et qualité des données au service de la gouvernance de vos données internes et externes ou comment enrichir et fédérer votre patrimoine informationnel avec le Social data, Big Data, Cloud data … De nombreux retours d’expérience concrets vous seront également délivrés lors de cette matinée, à travers les témoignages de : - Philippe Kirady, CARDIF, Directeur expertise métier et process- Michelle Martin, SOLVAY, Directrice Data Management- Thierry Chamfrault, TECHNIP, Directeur Qualité et méthodes IT- Manuel Amorim, LE PARISIEN, Responsable Audience et Fidélisation Département Numérique- Jean-Michel Collomb, Architecte d’entreprise, AMADEUS Global Business ServicesVous avez des problématiques de :- Gouvernance des données- Qualité des données- Référentiels de données, produits, clients, fournisseurs, RH Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Lieu : Jeudi 24 Octobre 2013, de 8h30 à 13h30 - Centre de Conférences Paris Victoire - 52, rue de la Victoire - 75009 Paris Inscription: Par retour d'email à Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} [email protected] ou [email protected]

    Read the article

  • 3 Trends for SMBs around Social, Mobile, and Sensor

    - by Socially_Aware_Enterprise
    While I often am talking to big companies or discussing enterprise solutions. There are times when individuals ask me about Small or Medium sized business trends.  Interestingly,  the Enterprise Social, Mobile, and Sensor initiatives I regularly discuss are in fact related to even the Mom and Pop storefront. The eco-system of new service players in the Social-Mobile-Sensor space generally emerge developing partnerships with enterprises as they develop and bring economy to scale to their services for the larger market. And of course Oracle has an entire division dedicated for delivering products and support to help emerging companies compete without the need to open an industrial strength credit line.. So here are some trends that we are helping large enterprises to deploy today, but small and medium businesses should be able to take advantage of by the end of this year and starting into 2015. 1) The typical small business is generally "Localized". But the ability to be "Hyper-Localized" will come as location based services become ubiquitous. Many small businesses have one or several storefronts and theirs are typically within a single regional economic footprint. While the internet provides global reach, it will be the businesses that invest in social, mobile and local that will win in the end.  Of course I am a huge SoMoLo evangelist. The SMBs' content and targeting with platforms for Geo-Fencing, Geo-Conquesting and Path-Matching to HHI are all going to be accessible to them, if not for Mobile Apps, then via Mobile messaging in Social Networks that offer it.. Expect to be able to target FaceBook messaging not by city, but by store or mall… This makes being able to be "Hyper-Local" even more important. And with new proximity services coming online more than ever before, SMBs will operate and service customers with pinpoint accuracy right down to where they stand in an aisle. Geo-Conquesting will be huge for small players to place ads when customers pass through competitors regions. Car Dealers are doing this now.. But also of course iBeacons are now very cheap and getting easier to put in retail stores. The ability for sales to happen anywhere in the store via a mobile phone or tablet is huge, as it will give the small shop the flexibility to not have to "Guard the Register" as more or most transactions will be digital. Thus, M-Commerce and T-Commerce will change the job of cashier dramatically.. 2) Intra-Brand Advocacy, the idea now is that rather than just depend on your trusty social media manager and his team, you are going to push more and more individuals with expertise inside the organization to help manage, reach-out, and utilize social channels to manage the incoming questions and answers customers need. While for years CRM was the tool of the enterprise, today CRMs enable this now "Salesforce et al" capability to trickle throughout the company. This gives greater pressure to organize roles, but also flatten out the organization. Internal collaboration around topics and customer needs is going to be the key for SMBs to finally get serious about customer experiences. Their customers are online and in social networks. This includes not just B2C SMBs but also B2B companies as well. Don't believe me? To find the players just use hashtag #SocialSelling and you will see… 3) The Visual Networks will begin to move from Content Aggregators to Content Collaboration platforms, which means Pinterest, Instagram, Vine, & others will begin to move to add more features brands want, first marketing platforms, rather than unique brand partnerships as they do today, but this will open ways for SMBs to engage with clear brand messaging and metrics. Eventually providing more "Collaboration" between Brand and Consumer.. Don't think for a minute Facebook bought Oculus Rift so you could see your timeline in 3-D. The Social Networks I advise customers to invest in are ones that are audio and visual intrinsically. Players from SoundCloud to Pinterest are deploying ways for brands to harness their interactive visual or audio based social networks to sell ad units aka brand messaging. While the Social Media revolution is going on, the emphasis was on the social, today it more and more about the media in social, that enterprises soon small and medium businesses will be connected to. 

    Read the article

  • JustCode Provides Reflector Alternative

    - by Joe Mayo
    If you've been a loyal Reflector user, you've probably been exposed to the debacle surrounding RedGate's decision to no longer offer a free version.  Since then, the race has begun for a replacement with a provider that would stand by their promises to the community.  Mono has an ongoing free alternative, which has been available for a long time.  However, other vendors are stepping up to the plate, with their own offerings. If Not Reflector, Then What? One of these vendors is Telerik.  In their recent Q1 2011 release of JustCode, Telerik offers a decompilation utility rivaling what we've become accustomed to in Reflector.  Not only does Telerik offer a usable replacement, but they've (in my opinion), produced a product that integrates more naturally with visual Studio than any other product ever has.  Telerik's decompilation process is so easy that the accompanying demo in this post is blindingly short (except for the presence of verbose narrative). If you want to follow along with this demo, you'll need to have Telerik JustCode installed.  If you don't have JustCode yet, you can buy it or download a trial at the Telerik Web site . A Tall Tale; Prove It! With JustCode, you can view code in the .NET Framework or any other 3rd party library (that isn't well obfuscated).  This demo depends on LINQ to Twitter, which you can download from CodePlex.com and create a reference or install the package online as described in my previous post on NuGet.  Regardless of the method, you'll have a project with a reference to LINQ to Twitter.  Use a Console Project if you want to follow along with this demo. Note:  If you've created a Console project, remember to ensure that the Target Framework is set to .NET Framework 4.  The default is .NET Framework 4 Client Profile, which doesn't work with LINQ to Twitter.  You can check by double-clicking the Properties folder on the project and inspecting the Target Framework setting. Next, you'll need to add some code to your program that you want to inspect. Here, I add code to instantiate a TwitterContext, which is like a LINQ to SQL DataContext, but works with Twitter: var l2tCtx = new TwitterContext(); If you're following along add the code above to the Main method, which will look similar to this: using LinqToTwitter; namespace NuGetInstall { class Program { static void Main(string[] args) { var l2tCtx = new TwitterContext(); } } } The code above doesn't really do anything, but it does give something that I can show and demonstrate how JustCode decompilation works. Once the code is in place, click on TwitterContext and press the F12 (Go to Definition) key.  As expected, Visual Studio opens a metadata file with prototypes for the TwitterContext class.  Here's the result: Opening a metadata file is the normal way that Visual Studio works when navigating to the definition of a type where you don't have the code.  The scenario with TwitterContext happens because you don't have the source code to the file.  Visual Studio has always done this and you can experiment by selecting any .NET type, i.e. a string type, and observing that Visual Studio opens a metadata file for the .NET String type. The point I'm making here is that JustCode works the way Visual Studio works and you'll see how this can make your job easier. In the previous figure, you only saw prototypes associated with the code. i.e. Notice that the default constructor is empty.  Again, this is normal because Visual Studio doesn't have the ability to decompile code.  However, that's the purpose of this post; showing you how JustCode fills that gap. To decompile code, right click on TwitterContext in the metadata file and select JustCode Navigate -> Decompile from the context menu.  The shortcut keys are Ctrl+1.  After a brief pause, accompanied by a progress window, you'll see the metadata expand into full decompiled code. Notice below how the default constructor now has code as opposed to the empty member prototype in the original metadata: And Why is This So Different? Again, the big deal is that Telerik JustCode decompilation works in harmony with the way that Visual Studio works.  The navigate to functionality already exists and you can use that, along with a simple context menu option (or shortcut key) to transform prototypes into decompiled code. Telerik is filling the the Reflector/Red Gate gap by providing a supported alternative to decompiling code.  Many people, including myself, used Reflector to decompile code when we were stuck with buggy libraries or insufficient documentation.  Now we have an alternative that's officially supported by a company with an excellent track record for customer (developer) service, Telerik.  Not only that, JustCode has several other IDE productivity tools that make the deal even sweeter. Joe

    Read the article

  • Career guidance/advice for Junior-level Software Engineer [closed]

    - by John Do
    I have quite a few questions on my mind, so please bare with me. Please don't feel obligated to answer all of them, any as you choose will do. I'd appreciate if you could share some insight on any of these. Before I begin, some context: I currently have almost two years of professional experience as a Software Engineer, mainly developing software in Java. At this point, I feel that I have reached the peak in my career growth at the current company I am at and therefore I am looking for a new job, ideally again, as a Software Engineer. I have been interviewing for the past few months casually but have not had luck with companies I have a passion for. So, in no particular order - 1) In general, what are your thoughts on having graduate degrees in CS / Software Engineering. How much does it influence a salary increase, and do you think it's beneficial when working on real-world problems? I get the sense that a graduate degree in the field is trivial unless you really have a passion for research. 2) In general, in professional practice, how often had you have to write your own data structures and "complex" algorithms from scratch? In my own work, I have found myself relying mainly on third-party frameworks and the Java standard library to implement solutions as per business requirements. What are your thoughts on this? 3) In terms of resume, I feel the most ambivalent here. I want to be able to "blemish" my resume to a certain extent so that it stands out from others', but at the same time I do not want to over-exagerate my abilities. How do you strike a balance here? For example: I say that I am proficient in Java with data structures and algorithms. This is obviously a subjective and relative statement. I've taken the classes in my undergrad, and I've applied it in my work experience. What I feel as "prociency" can be seen as junior-level to others. How do you know what to say? Most of the time, recruiters (with no technical background) will be looking for keywords that stand out. This leads me to my next question (4). 4) Just from interviewing for the past few months (and getting plenty of rejections), I've come to realize that I may not be as proficient in data structures and algorithms as I thought I was. Do you think it's a good idea to remove the "proficient in java/data structure and algorithms"? I feel that being too hoenst on the resume will impede me from scoring opportunities to even have an interview with top-notch companies. What are your thoughts? 5) What is the absolute "must-have" knowledge going into a technical interview? I've been practicing several algorithmic and data sturcture problems now, and I feel that my abilities to solve arbitrary problems efficiently has not gotten significantly better. Do you think these abilities are something innate - it's either you have in you, or you don't? How can you teach yourself to learn, if you will? 6) How easy is it to go from industry/function to the next? I work mainly with backend technologies and I'm now interested in working with the frontend, i.e javascript,jquery,php or even mobile development. In your own experience, how did you not get pidgeon holed in your career? I feel that the choices you make now ultimately decide your future. As cliche as it sounds, I think it may be true. Here's what I mean: you've worked mainly as a backend engineer, people are interested in you doing the same thing since you've already accumulated experience in that function. How do get experience in a new function if people won't accept you because you don't already have it? It's a catch 22, you see... Are side projects the only real way to help you move from one function to another that you're truly interested in? For example: I could start writing my own mobile applications, even though I've worked mainly on the backend. Thanks so much for the long read. As a relatively new engineer to the real world, I am very humble and would like those who are experienced to shed some light. Thank you so much.

    Read the article

  • Session Report - Java on the Raspberry Pi

    - by Janice J. Heiss
    On mid-day Wednesday, the always colorful Oracle Evangelist Simon Ritter demonstrated Java on the Raspberry Pi at his session, “Do You Like Coffee with Your Dessert?”. The Raspberry Pi consists of a credit card-sized single-board computer developed in the UK with the intention of stimulating the teaching of basic computer science in schools. “I don't think there is a single feature that makes the Raspberry Pi significant,” observed Ritter, “but a combination of things really makes it stand out. First, it's $35 for what is effectively a completely usable computer. You do have to add a power supply, SD card for storage and maybe a screen, keyboard and mouse, but this is still way cheaper than a typical PC. The choice of an ARM (Advanced RISC Machine and Acorn RISC Machine) processor is noteworthy, because it avoids problems like cooling (no heat sink or fan) and can use a USB power brick. When you add in the enormous community support, it offers a great platform for teaching everyone about computing.”Some 200 enthusiastic attendees were present at the session which had the feel of Simon Ritter sharing a fun toy with friends. The main point of the session was to show what Oracle was doing to support Java on the Raspberry Pi in a way that is entertaining and fun. Ritter pointed out that, in addition to being great for teaching, it’s an excellent introduction to the ARM architecture, and runs well with Java and will get better once it has official hard float support. The possibilities are vast.Ritter explained that the Raspberry Pi Project started in 2006 with the goal of devising a computer to inspire children; it drew inspiration from the BBC Micro literacy project of 1981 that produced a series of microcomputers created by the Acorn Computer company. It was officially launched on February 29, 2012, with a first production of 10,000 boards. There were 100,000 pre-orders in one day; currently about 4,000 boards are produced a day. Ritter described the specification as follows:* CPU: ARM 11 core running at 700MHz Broadcom SoC package Can now be overclocked to 1GHz (without breaking the warranty!) * Memory: 256Mb* I/O: HDMI and composite video 2 x USB ports (Model B only) Ethernet (Model B only) Header pins for GPIO, UART, SPI and I2C He took attendees through a brief history of ARM Architecture:* Acorn BBC Micro (6502 based) Not powerful enough for Acorn’s plans for a business computer * Berkeley RISC Project UNIX kernel only used 30% of instruction set of Motorola 68000 More registers, less instructions (Register windows) One chip architecture to come from this was… SPARC * Acorn RISC Machine (ARM) 32-bit data, 26-bit address space, 27 registers First machine was Acorn Archimedes * Spin off from Acorn, Advanced RISC MachinesNext he presented its features:* 32-bit RISC Architecture–  ARM accounts for 75% of embedded 32-bit CPUs today– 6.1 Billion chips sold last year (zero manufactured by ARM)* Abstract architecture and microprocessor core designs– Raspberry Pi is ARM11 using ARMv6 instruction set* Low power consumption– Good for mobile devices– Raspberry Pi can be powered from 700mA 5V only PSU– Raspberry Pi does not require heatsink or fanHe described the current ARM Technology:* ARMv6– ARM 11, ARM Cortex-M* ARMv7– ARM Cortex-A, ARM Cortex-M, ARM Cortex-R* ARMv8 (Announced)– Will support 64-bit data and addressingHe next gave the Java Specifics for ARM: Floating point operations* Despite being an ARMv6 processor it does include an FPU– FPU only became standard as of ARMv7* FPU (Hard Float, or HF) is much faster than a software library* Linux distros and Oracle JVM for ARM assume no HF on ARMv6– Need special build of both– Raspbian distro build now available– Oracle JVM is in the works, release date TBDNot So RISCPerformance Improvements* DSP Enhancements* Jazelle* Thumb / Thumb2 / ThumbEE* Floating Point (VFP)* NEON* Security Enhancements (TrustZone)He spent a few minutes going over the challenges of using Java on the Raspberry Pi and covered:* Sound* Vision * Serial (TTL UART)* USB* GPIOTo implement sound with Java he pointed out:* Sound drivers are now included in new distros* Java Sound API– Remember to add audio to user’s groups– Some bits work, others not so much* Playing (the right format) WAV file works* Using MIDI hangs trying to open a synthesizer* FreeTTS text-to-speech– Should work once sound works properlyHe turned to JavaFX on the Raspberry Pi:* Currently internal builds only– Will be released as technology preview soon* Work involves optimal implementation of Prism graphics engine– X11?* Once the JavaFX implementation is completed there will be little of concern to developers-- It’s just Java (WORA). He explained the basis of the Serial Port:* UART provides TTL level signals (3.3V)* RS-232 uses 12V signals* Use MAX3232 chip to convert* Use this for access to serial consoleHe summarized his key points. The Raspberry Pi is a very cool (and cheap) computer that is great for teaching, a great introduction to ARM that works very well with Java and will work better in the future. The opportunities are limitless. For further info, check out, Raspberry Pi User Guide by Eben Upton and Gareth Halfacree. From there, Ritter tried out several fun demos, some of which worked better than others, but all of which were greeted with considerable enthusiasm and support and good humor (even when he ran into some glitches).  All in all, this was a fun and lively session.

    Read the article

  • To My 24 Year Old Self, Wherever You Are&hellip;

    - by D'Arcy Lussier
    A decade is a milestone in one’s life, regardless of when it occurs. 2011 might seem like a weird year to mark a decade, but 2001 was a defining year for me. It marked my emergence into the technology industry, an unexpected loss of innocence, and triggered an ongoing struggle with faith and belief. Once you go through a valley, climbing the mountain and looking back over where you travelled, you can take in the entirety of the journey. Over the last 10 years I kept journals, and in this new year I took some time to review them. For those today that are me a decade ago, I share with you what I’ve gleamed from my experiences. Take it for what it’s worth, and safe travels on your own journeys through life. Life is a Performance-Based Sport Have confidence, believe you’re capable, but realize that life is a performance-based sport. Everything you get in life is based on whether you can show that you deserve it. Performance is also your best defense against personal attacks. Just make sure you know what standards you’re expected to hit and if people want to poke holes at you let them do the work of trying to find them. Sometimes performance won’t matter though. Good things will happen to bad people, and bad things to good people. What’s important is that you do the right things and ensure the good and bad even out in your own life. How you finish is just as important as how you start. Start strong, end strong. Respect is Your Most Prized Reward Respect is more important than status or ego. The formula is simple: Performing Well + Building Trust + Showing Dedication = Respect Focus on perfecting your craft and helping your team and respect will come. Life is a Team Sport Whatever aspect of your life, you can’t do it alone. You need to rely on the people around you and ensure you’re a positive aspect of their lives; even those that may be difficult or unpleasant. Avoid criticism and instead find ways to help colleagues and superiors better whatever environment you’re in (work, home, etc.). Don’t just highlight gaps and issues, but also come to the table with solutions. At the same time though, stand up for yourself and hold others accountable for the commitments they make to the team. A healthy team needs accountability. Give feedback early and often, and make it verbal. Issues should be dealt with immediately, and positives should be celebrated as they happen. Life is a Contact Sport Difficult moments will happen. Don’t run from them or shield yourself from experiencing them. Embrace them. They will further mold you and reveal who you will become. Find Your Tribe and Embrace Your Community We all need a tribe: a group of people that we gravitate to for support, guidance, wisdom, and friendship. Discover your tribe and immerse yourself in them. Don’t look for a non-existent tribe just to fill the need of belonging though that will leave you empty and bitter when they don’t meet your unrealistic expectations. Try to associate with people more experienced and more knowledgeable than you. You’ll always learn, and you’ll always remember you have much to learn. Put yourself out there, get involved with the community. Opportunities will present themselves. When we open ourselves up to be vulnerable, we also give others the chance to do the same. This helps us all to grow and help each other, it’s very important. And listen to your wife. (Easter *is* a romantic holiday btw, regardless of what you may think.) Don’t Believe Your Own Press Clippings (and by that I mean the ones you write) Until you have a track record of performance to refer to, any notions of grandeur are just that: notions. You lose your rookie status through trials and tribulations, not by the number of stamps in your passport. Be realistic about your own “experience and leadership” and be honest when you aren’t ready for something. And always remember: nobody really cares about you as much as you think they do. Don’t Let Assholes Get You Down The world isn’t evil, but there is evil in the world. Know the difference and don’t paint all people with the same brush. Do be wary of those that use personal beliefs to describe their business (i.e. “We’re a [religion] company”). What matters is the culture of the organization, and that will tell you the moral compass and what is truly valued. Don’t make someone or something a priority that only makes you an option. Life is unfair and enemies/opponents will succeed when you fail. Don’t waste your energy getting upset at this; the only one that will lose out is you. As mentioned earlier, nobody really cares about you as much as you think they do. Misc Ecclesiastes is bullshit. Everything is certainly *not* meaningless. Software development is about delivery, not the process. Having a great process means nothing if you don’t produce anything. Watch “The Weatherman” (“It’s not easy, but easy doesn’t enter into grownup life.”). Read Tony Dungee’s autobiography, even if you don’t like football, and even if you aren’t a Christian. Say no, don’t feel like you have to commit right away when someone asks you to.

    Read the article

  • Part 8: How to name EBS Customizations

    - by volker.eckardt(at)oracle.com
    You might wonder why I am discussing this here. The reason is simple: nearly every project has a bit different naming conventions, which makes a the life always a bit complicated (for developers, but also setup responsible, and also for consultants).  Although we always create a document to describe the technical object naming conventions, I have rarely seen a dedicated document  with functional naming conventions. To be precisely, from my stand point, there should always be one global naming definition for an implementation! Let me discuss some related questions: What is the best convention for the customization reference? How to name database objects (tables, packages etc.)? How to name functional objects like Value Sets, Concurrent Programs, etc. How to separate customizations from standard objects best? What is the best convention for the customization reference? The customization reference is the key you use to reference your customization from other lists, from the project plan etc. Usually it is something like XXHU_CONV_22 (HU=customer abbreviation, CONV=Conversion object #22) or XXFA_DEPRN_RPT_02 (FA=Fixed Assets, DEPRN=Short object group, here depreciation, RPT=Report, 02=2nd report in this area) As this is just a reference (not an object name yet), I would prefer the second option. XX=Customization, FA=Main EBS Module linked (you may have sometimes more, but FA is the main) DEPRN_RPT=Short name to specify the customization 02=a unique number Important here is that the HU isn’t used, because XX is enough to mark a custom object, and the 3rd+4th char can be used by the EBS module short name. How to name database objects (tables, packages etc.)? I was leading different developer teams, and I know that one common way is it to take the Customization reference and add more chars behind to classify the object (like _V for view and _T1 for triggers etc.). The only concern I have with this approach is the reusability. If you name your view XXFA_DEPRN_RPT_02_V, no one will by choice reuse this nice view, as it seams to be specific for this CEMLI. My suggestion is rather to name the view XXFA_DEPRN_PERIODS_V and allow herewith reusability for other CEMLIs (although the view will be deployed primarily with CEMLI package XXFA_DEPRN_RPT_02). (check also one of the following Blogs where I will talk about deployment.) How to name Value Sets, Concurrent Programs, etc. For Value Sets I would go with the same convention as for database objects, starting with XX<Module> …. For Concurrent Programs the situation is a bit different. This “object” is seen and used by a lot of users, and they will search for. In many projects it is common to start again with the company short name, or with XX. My proposal would differ. If you have created your own report and you name it “XX: Invoice Report”, the user has to remember that this report does not start with “I”, it starts with X. Would you like typing an X if you are looking for an Invoice report? No, you wouldn’t! So my advise would be to name it:   “Invoice Report (XXAP)”. Still we know it is custom (because of the XXAP), but the end user will type the key “i” to get it (and will see similar reports starting also with “i”). I hope that the general schema behind has now become obvious. How to separate customizations from standard objects best? I would not have this section here if the naming would not play an important role. Unfortunately, we can not always link a custom application to our own object, therefore the naming is really important. In the file system structure we use our $XXyy_TOP, in JAVA_TOP it is perhaps also “xx” in front. But in the database itself? Although there are different concepts in place, still many implementations are using the standard “apps” approach, means custom objects are stored in the apps schema (which should not cause any trouble). Final advise: review the naming conventions regularly, once a month. You may have to add more! And, publish them! To summarize: Technical and functional customized objects should always follow a naming convention. This naming convention should be project wide, and only one place shall be used to maintain (like in a Wiki). If the name is for the end user, rather put a customization identifier at the end; if it is an internal name, start with XX…

    Read the article

  • What developer conferences are you going to this year?

    - by mbcrump
    This short list is what I consider to be the “cream-of-the-crop” in developer conferences. This is also a list of the conferences that I plan on attending in 2011. If you feel your conference is just as good, then shoot me an email at [michael[at]michaelcrump[dot]net, and if possible I will check it out.   In-Person Event Las Vegas on April 18th-22nd, 2011 Redmond on October 17th-21st, 2011 Orlando on December 5th-9th, 2011 Visual Studio Live – I attended this event in November of last year and blogged about my experience. I am also planning on going back to the Orlando session in December of this year. So what did I like the most about this event? Being able to interact one-on-one with a majority of the speakers. If you read my blog post then you will see a list of the speakers that I met up with. I also made a lot of great connections with other professional developers all over the world. They are having an event in Las Vegas on April 18th-22nd. I noticed at this event that they have added a new track on mobile. Being a big fan of mobile, I feel that this is a great move. They also have a great selection for Silverlight Developers including Billy Hollis and Rocky Lhotka. For the full lineup of conference tracks, sessions and speakers visit http://bit.ly/VSLiveTrks. If you are interested in this then you can register here by February 16th. I must add that you can save $300 bucks by getting the early-bird special.   Virtual Conference SSWUG (DBTechCon) - holds the largest virtual conference in the information technology industry. It is also special to me because they selected a majority of my Silverlight content for the April conference. No traveling fees and all of the sessions are recorded so you can watch them on-demand for $189 bucks (early-bird special). For the entire speaker list then click here. The session list has also been published. If you are interested in this then you can register here.   In-Person Event Knoxville, TN on June 3rd/4th 2011. Codestock.org – If you live in the South then you have heard of CodeStock. To my knowledge, they have only had 3 events so far and they were a huge success. It was such a success that after the last event, everyone was telling me how good it was and how much they enjoyed it. They currently have a call for speakers going on right now, so if you have sessions then be sure to submit yours. So, what makes them stand out? Well for starters Michael Neal (organizer) developed an open API so conference attendees could build their own apps for the sessions. They also encouraged their speakers to go to other sessions instead of stay in a “speaker-room”. Another cool feature is that they are uploading videos from the conference so everyone can benefit. They are currently looking for sponsorship, so help out if you can.   In-Person Event Redmond, WA on October 28/29 2011 *NOT 100% SURE AT THIS POINT* PDC 11 – OK, so the logo should be pdc11 but its not out yet. This event is located on Microsoft’s campus in Redmond, WA. It is probably one of the most well known conferences for developers to attend. One of the big perks from this event is that you typically come away with free stuff. In 2010 they gave away Windows 7 Phones. I remember years earlier they gave away laptops. This of course isn’t the only reason to go, you may get to tour the Microsoft campus. Since pdc is a huge event, you can view all the events for free. Mike Taulty created a nice Silverlight application that consumes the OData feed. You can download it here. If everything goes as planned, I will be at all of these events. If you plan on going then send me a tweet and we will do lunch or dinner. I love meeting new developers and talking .net.  Subscribe to my feed

    Read the article

  • JPRT: A Build & Test System

    - by kto
    DRAFT A while back I did a little blogging on a system called JPRT, the hardware used and a summary on my java.net weblog. This is an update on the JPRT system. JPRT ("JDK Putback Reliablity Testing", but ignore what the letters stand for, I change what they mean every day, just to annoy people :\^) is a build and test system for the JDK, or any source base that has been configured for JPRT. As I mentioned in the above blog, JPRT is a major modification to a system called PRT that the HotSpot VM development team has been using for many years, very successfully I might add. Keeping the source base always buildable and reliable is the first step in the 12 steps of dealing with your product quality... or was the 12 steps from Alcoholics Anonymous... oh well, anyway, it's the first of many steps. ;\^) Internally when we make changes to any part of the JDK, there are certain procedures we are required to perform prior to any putback or commit of the changes. The procedures often vary from team to team, depending on many factors, such as whether native code is changed, or if the change could impact other areas of the JDK. But a common requirement is a verification that the source base with the changes (and merged with the very latest source base) will build on many of not all 8 platforms, and a full 'from scratch' build, not an incremental build, which can hide full build problems. The testing needed varies, depending on what has been changed. Anyone that was worked on a project where multiple engineers or groups are submitting changes to a shared source base knows how disruptive a 'bad commit' can be on everyone. How many times have you heard: "So And So made a bunch of changes and now I can't build!". But multiply the number of platforms by 8, and make all the platforms old and antiquated OS versions with bizarre system setup requirements and you have a pretty complicated situation (see http://download.java.net/jdk6/docs/build/README-builds.html). We don't tolerate bad commits, but our enforcement is somewhat lacking, usually it's an 'after the fact' correction. Luckily the Source Code Management system we use (another antique called TeamWare) allows for a tree of repositories and 'bad commits' are usually isolated to a small team. Punishment to date has been pretty drastic, the Queen of Hearts in 'Alice in Wonderland' said 'Off With Their Heads', well trust me, you don't want to be the engineer doing a 'bad commit' to the JDK. With JPRT, hopefully this will become a thing of the past, not that we have had many 'bad commits' to the master source base, in general the teams doing the integrations know how important their jobs are and they rarely make 'bad commits'. So for these JDK integrators, maybe what JPRT does is keep them from chewing their finger nails at night. ;\^) Over the years each of the teams have accumulated sets of machines they use for building, or they use some of the shared machines available to all of us. But the hunt for build machines is just part of the job, or has been. And although the issues with consistency of the build machines hasn't been a horrible problem, often you never know if the Solaris build machine you are using has all the right patches, or if the Linux machine has the right service pack, or if the Windows machine has it's latest updates. Hopefully the JPRT system can solve this problem. When we ship the binary JDK bits, it is SO very important that the build machines are correct, and we know how difficult it is to get them setup. Sure, if you need to debug a JDK problem that only shows up on Windows XP or Solaris 9, you'll still need to hunt down a machine, but not as a regular everyday occurance. I'm a big fan of a regular nightly build and test system, constantly verifying that a source base builds and tests out. There are many examples of automated build/tests, some that trigger on any change to the source base, some that just run every night. Some provide a protection gateway to the 'golden' source base which only gets changes that the nightly process has verified are good. The JPRT (and PRT) system is meant to guard the source base before anything is sent to it, guarding all source bases from the evil developer, well maybe 'evil' isn't the right word, I haven't met many 'evil' developers, more like 'error prone' developers. ;\^) Humm, come to think about it, I may be one from time to time. :\^{ But the point is that by spreading the build up over a set of machines, and getting the turnaround down to under an hour, it becomes realistic to completely build on all platforms and test it, on every putback. We have the technology, we can build and rebuild and rebuild, and it will be better than it was before, ha ha... Anybody remember the Six Million Dollar Man? Man, I gotta get out more often.. Anyway, now the nightly build and test can become a 'fetch the latest JPRT build bits' and start extensive testing (the testing not done by JPRT, or the platforms not tested by JPRT). Is it Open Source? No, not yet. Would you like to be? Let me know. Or is it more important that you have the ability to use such a system for JDK changes? So enough blabbering on about this JPRT system, tell me what you think. And let me know if you want to hear more about it or not. Stay tuned for the next episode, same Bloody Bat time, same Bloody Bat channel. ;\^) -kto

    Read the article

< Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >