Search Results

Search found 24293 results on 972 pages for 'static ip'.

Page 42/972 | < Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >

• How to set up IP forwarding on Nexenta (Solaris)?

  - by Gleb

  I am trying to set up IP forwarding on my Nexenta box: root@hdd:~# uname -a SunOS hdd 5.11 NexentaOS_134f i86pc i386 i86pc Solaris The box has 2 network interfaces: root@hdd:~# ifconfig -a lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 e1000g1: flags=1001100843<UP,BROADCAST,RUNNING,MULTICAST,ROUTER,IPv4,FIXEDMTU> mtu 1500 index 2 inet 192.168.12.2 netmask ffffff00 broadcast 192.168.12.255 ether 68:5:ca:9:51:b8 myri10ge0: flags=1100843<UP,BROADCAST,RUNNING,MULTICAST,ROUTER,IPv4> mtu 9000 index 3 inet 10.10.10.10 netmask ffffff00 broadcast 10.10.10.255 ether 0:60:dd:47:87:2 lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252 index 1 inet6 ::1/128 192.168.12.0 is my normal LAN with 192.168.12.1 being the firewall/gateway 10.10.10.0 is a separate LAN for iSCSI (with no internet access) I want to set up IP forwarding so that a computer on 10.10.10.0 will be able to access the internet by using 10.10.10.10 as a gateway (I don't need any port forwarding) I have turned on IP forwarding: root@hdd:~# routeadm Configuration Current Current Option Configuration System State --------------------------------------------------------------- IPv4 routing disabled disabled IPv6 routing disabled disabled IPv4 forwarding enabled enabled IPv6 forwarding disabled disabled Routing services "route:default ripng:default" Routing daemons: STATE FMRI disabled svc:/network/routing/rdisc:default disabled svc:/network/routing/route:default disabled svc:/network/routing/legacy-routing:ipv4 disabled svc:/network/routing/legacy-routing:ipv6 disabled svc:/network/routing/ripng:default online svc:/network/routing/ndp:default But when I dry to start ipnat, I get an error: root@hdd:~# ipnat -CF -f /etc/ipf/ipnat.conf ioctl(SIOCGNATS): I/O error Here is the config: root@hdd:~# cat /etc/ipf/ipnat.conf #!/sbin/ipnat -f - # map e1000g1 10.10.10.10/24 -> 192.168.12.2/32 So the question is how to fix this.. Thanks in advance!

  Read the article

• How to run a website domain without redirecting if IP is already used for another website? [duplicate]

  - by SSpoke

  This question already has an answer here: Hosting multiple distinct folders for distinct domains 1 answer I bought a VPS Host that gave me only 1 IP Address which I used on my first domain name and it works without any problems. Now my second domain name I can't use the same ip address as it points to the first domain name. So I figured my only option was to use a GoDaddy hosted iframe redirection which redirects to a sub folder on my first domain which worked so far. Now I'm trying to load paypal from <?php headers() ?> and I get a permission error because of that iframe Refused to display 'https://www.paypal.com/cgi-bin/webscr?notify_url=&cmd=_cart&upload=1&business=removed&address_override=1' in a frame because it set 'X-Frame-Options' to 'SAMEORIGIN'. How do I avoid the Iframe solution for my second domain while not messing up my first domain? Somebody I forgot once told me it doesn't matter if you have 1 IP Address you could host multiple websites on it? how it that possible the DNS doesn't seem to work off ports afaik, yes I could host multiple websites on different folders but that's not what I call hosting a real website it has to be pointed by a domain name, so this iframe issue doesn't happen My server configuration is httpd (apache) that comes with CentOS 6 (Linux) operating system

  Read the article

• How can I determine the IP addresses allocated by DHCP on a router that I'm connected to?

  - by user234831

  This "router" is not a typical situation. I'm using my phone as a hotspot and can only configure a select number of DHCP options. I can manage the limit on how many devices/clients can use my phone as a hotspot. I have to select from a radio-button list with the options: 2,3,4,5, or 8 I can specify the DHCP starting IP address. In this case, it begins at 192.168.6.106 When I'm connected via WIFI to my phone, an ipconfig /all command shows me that the default gateway is 192.168.6.1 and my IPv4 address is 192.168.1.148. I have the luxury of connecting another device to the phone and that device was assigned 192.168.1.121. I've tried connecting to 192.168.6.1, hoping for some sort of router setup page that I'm used to seeing, but there is no such thing or maybe it's just a matter of incompatable operating systems. In summary, the "router" (phone) has an IP address of 192.168.6.1 and a DHCP server that begins at 192.168.6.106 and allows up to 8 connections. Normally, I would assume a range of 192.168.6.106 - 192.168.6.113, but connected clients are showing otherwise. How can I figure out which IP addresses are set aside by DHCP for clients?

  Read the article

• List of all TCP/IP and WinSock Repair commands

  - by Niepojety

  I am building a C# application and I am looking for all a list of TCP/IP and WinSock Repair commands. ipconfig /flushdns netsh int reset all netsh int ipv4 reset netsh int ipv6 reset netsh int ip reset netsh int ip reset c:\ipreset.log netsh int ip reset resetlog.txt netsh int ip reset c:\resetlog.txt netsh int ip reset c:\network-connection.log netsh int 6to4 reset all netsh int httpstunnel reset all netsh int isatap reset all netsh int tcp reset all netsh int teredo reset all netsh int portproxy reset all netsh branchcache reset netsh winhttp reset netsh winsock reset c:\winsock.log netsh winsock reset netsh winsock reset all netsh winsock reset catalog

  Read the article

• routing based on source IP

  - by user1977050

  I am trying to do source-based routing, following the question http://unix.stackexchange.com/questions/131527/routing-based-on-source-ip. The source IP floating one and assigned to a cluster (consists from 2 servers). Let's say that the physical IP on server1 is 192.0.2.1, on server2 192.0.2.2, and the virtual IP is 192.0.2.3 (and this should be the source IP for outgoing traffic). How can I configure static source IP routing for this in RHEL?

  Read the article

• static block instance block java Order

  - by Rollerball

  Having read this question In what order are the different parts of a class initialized when a class is loaded in the JVM? and the related JLS. I would like to know in more detail why for example having class Animal (superclass) and class Dog (subclass) as following: class Animal { static{ System.out.println("This is Animal's static block speaking"): } { System.out.println("This is Animal's instance block speaking"); } class Dog{ static{ System.out.println("This is Dog's static block speaking"); } { System.out.println("This is Dog's instance block speaking"); } public static void main (String [] args) { Dog dog = new Dog(); } } Ok before instantiating a class its direct superclass needs to be initialized (therefore all the statics variables and block need to be executed). So basically the question is: Why after initializing the static variables and static blocks of the super class, control goes down to the subclass for static variables initialization rather then finishing off the initialization of also the instance member? The control goes like: superclass (Animal): static variables and static blocks subclass (Dog): static variables and static blocks superclass (Animal): instance variables and instance blocks sublcass (Dog):instance variables and instance blocks What is the reason why it is in this way rather than : superclass -> static members superclass -> instance members subclass -> static members sublcass-> instance members

  Read the article

• After Port Forwarding, how to get my external IP in Java ?

  - by Frank

  I set up a static IP and did port forwarding on my notebook, and now I have a static IP address, but it's relatively static, every time I re-start the machine, I get another address, and since I have a "static" IP I can now do Paypal IPN messaging. But how can I get this static IP from my Java program ? One way I can think of is to visit : http://portforward.com/ and on that page it tells me what my external IP is, so I can extract it with Java code, is there any other way that I can do in my Java code to get this info ?

  Read the article

• How to know that my IP is invalid

  - by PeterMmm

  I have a script running that will start up an interface with a new IP. If the script comes up with an IP that is already in use i am in trouble. Is it possible that the script set up the new Ip, detects that this IP is already in use and then check the next one, until it finds an ip that works ? B=192.168.1. I=1 while [ "$I" != "256" ] do ifconfig eth0:1 $B.$I # check here that IP is Ok ! let "I=I+1" done

  Read the article

• What is a good use case for static import of methods?

  - by Miserable Variable

  Just got a review comment that my static import of the method was not a good idea. The static import was of a method from a DA class, which has mostly static methods. So in middle of the business logic I had a da activity that apparently seemed to belong to the current class: import static some.package.DA.*; class BusinessObject { void someMethod() { .... save(this); } } The reviewer was not keen that I change the code and I didn't but I do kind of agree with him. One reason given for not static-importing was it was confusing where the method was defined, it wasn't in the current class and not in any superclass so it too some time to identify its definition (the web based review system does not have clickable links like IDE :-) I don't really think this matters, static-imports are still quite new and soon we will all get used to locating them. But the other reason, the one I agree with, is that an unqualified method call seems to belong to current object and should not jump contexts. But if it really did belong, it would make sense to extend that super class. So, when does it make sense to static import methods? When have you done it? Did/do you like the way the unqualified calls look? EDIT: The popular opinion seems to be that static-import methods if nobody is going to confuse them as methods of the current class. For example methods from java.lang.Math and java.awt.Color. But if abs and getAlpha are not ambiguous I don't see why readEmployee is. As in lot of programming choices, I think this too is a personal preference thing. Thanks for your response guys, I am closing the question.

  Read the article

• How do i mitigate DDOS attacks on static servers?

  - by acidzombie24

  Here is a slightly different take on DDOS attacks. Rather than a server with dynamic content being attack i was curious how to deal with attacks on servers with STATIC CONTENT. This means cpu tends to not be an issue. Its either bandwidth or connection problems. How would i mitigate a DDOS attack knowing nothing about the attacker (for example country, ip address or anything else). I was wondering is shorting the timeout and increasing amount of connections is an acceptable solution? Or maybe that is completely useless? Also i would limit the amount of connections per IP address. Would the above help or be pointless? Keeping in mind everything is static checking for multiple request of the same page (html, css, js, etc) could be a sign of a attack. What are some measures i can take on a static content server?

  Read the article

• Customer site is out of IP addresses, they want to go from /24 to /12 netmask... Bad idea?

  - by ewwhite

  One of my client sites called to ask me to change the subnet masks of the Linux servers I manage there while they re-IP/change the netmask of their network based on a 10.0.0.x scheme. "Can you change the server netmasks from 255.255.255.0 to 255.240.0.0?" You mean, 255.255.240.0? "No, 255.240.0.0." Are you sure you need that many IP addresses? "Yeah, we never want to run out of IP addresses." A quick check against the Subnet Cheat Sheet shows: a 255.255.255.0 netmask, a /24 provides 256 hosts. It's clear to see that an organization can exhaust that number of IP addresses. a 255.240.0.0 netmask, a /12 provides 1,048,576 hosts. This is a small < 200-user site. I doubt that they'd allocate more than 400 IP addresses. I suggested something that provides fewer hosts, like a /22 or /21 (1024 and 2048 hosts, respectively), but was unable to give a specific reason against using the /12 subnet. Is there anything this customer should be concerned about? Are there any specific reasons they shouldn't use such an incredibly large mask in their environment?

  Read the article

• char array split ip with strtok

  - by user1480139

  I'm trying to split a IP address like 127.0.0.1 from a file: using following C code: pch2 = strtok (ip,"."); printf("\npart 1 ip: %s",pch2); pch2 = strtok (NULL,"."); printf("\npart 2 ip: %s",pch2); And IP is a char ip[500], that containt an ip. When printing it prints 127 as part 1 but as part 2 it prints NULL? Can someone help me? EDIT: Whole function: FILE *file = fopen ("host.txt", "r"); char * pch; char * pch2; char ip[BUFFSIZE]; IPPart result; if (file != NULL) { char line [BUFFSIZE]; while(fgets(line,sizeof line,file) != NULL) { if(line[0] != '#') { //fputs(line,stdout); pch = strtok (line," "); printf ("%s\n",pch); strncpy(ip, pch, sizeof(pch)-1); ip[sizeof(pch)-1] = '\0'; //pch = strtok (line, " "); pch = strtok (NULL," "); printf("%s",pch); pch2 = strtok (ip,"."); printf("\nDeel 1 ip: %s",pch2); pch2 = strtok (NULL,"."); printf("\nDeel 2 ip: %s",pch2); //if(strcmp(pch,url) == 0) //{ // result.part1 = //} } } fclose(file); }

  Read the article

• TCP packets larger than 4 KB don't get a reply from Linux

  - by pts

  I'm running Linux 3.2.51 in a virtual machine (192.168.33.15). I'm sending Ethernet frames to it. I'm writing custom software trying to emulate a TCP peer, the other peer is Linux running in the virtual machine guest. I've noticed that TCP packets larger than about 4 KB are ignored (i.e. dropped without an ACK) by the Linux guest. If I decrease the packet size by 50 bytes, I get an ACK. I'm not sending new payload data until the Linux guest fully ACKs the previous one. I've increased ifconfig eth0 mtu 51000, and ping -c 1 -s 50000 goes through (from guest to my emulator) and the Linux guest gets a reply of the same size. I've also increased sysctl -w net.ipv4.tcp_rmem='70000 87380 87380 and tried with sysctl -w net.ipv4.tcp_mtu_probing=1 (and also =0). There is no IPv3 packet fragmentation, all packets have the DF flag set. It works the other way round: the Linux guest can send TCP packets of 6900 bytes of payload and my emulator understands them. This is very strange to me, because only TCP packets seem to be affected (large ICMP packets go through). Any idea what can be imposing this limit? Any idea how to do debug it in the Linux kernel? See the tcpdump -n -vv output below. tcpdump was run on the Linux guest. The last line is interesting: 4060 bytes of TCP payload is sent to the guest, and it doesn't get any reply packet from the Linux guest for half a minute. 14:59:32.000057 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 40) 192.168.33.1.36522 > 192.168.33.15.22: Flags [S], cksum 0x8da0 (correct), seq 10000000, win 14600, length 0 14:59:32.000086 IP (tos 0x10, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 44) 192.168.33.15.22 > 192.168.33.1.36522: Flags [S.], cksum 0xc37f (incorrect -> 0x5999), seq 1415680476, ack 10000001, win 19920, options [mss 9960], length 0 14:59:32.000218 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 40) 192.168.33.1.36522 > 192.168.33.15.22: Flags [.], cksum 0xa752 (correct), ack 1, win 14600, length 0 14:59:32.000948 IP (tos 0x10, ttl 64, id 53777, offset 0, flags [DF], proto TCP (6), length 66) 192.168.33.15.22 > 192.168.33.1.36522: Flags [P.], cksum 0xc395 (incorrect -> 0xfa01), seq 1:27, ack 1, win 19920, length 26 14:59:32.001575 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 40) 192.168.33.1.36522 > 192.168.33.15.22: Flags [.], cksum 0xa738 (correct), ack 27, win 14600, length 0 14:59:32.001585 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 65) 192.168.33.1.36522 > 192.168.33.15.22: Flags [P.], cksum 0x48d6 (correct), seq 1:26, ack 27, win 14600, length 25 14:59:32.001589 IP (tos 0x10, ttl 64, id 53778, offset 0, flags [DF], proto TCP (6), length 40) 192.168.33.15.22 > 192.168.33.1.36522: Flags [.], cksum 0xc37b (incorrect -> 0x9257), ack 26, win 19920, length 0 14:59:32.001680 IP (tos 0x10, ttl 64, id 53779, offset 0, flags [DF], proto TCP (6), length 496) 192.168.33.15.22 > 192.168.33.1.36522: Flags [P.], seq 27:483, ack 26, win 19920, length 456 14:59:32.001784 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 40) 192.168.33.1.36522 > 192.168.33.15.22: Flags [.], cksum 0xa557 (correct), ack 483, win 14600, length 0 14:59:32.006367 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 1136) 192.168.33.1.36522 > 192.168.33.15.22: Flags [P.], seq 26:1122, ack 483, win 14600, length 1096 14:59:32.044150 IP (tos 0x10, ttl 64, id 53780, offset 0, flags [DF], proto TCP (6), length 40) 192.168.33.15.22 > 192.168.33.1.36522: Flags [.], cksum 0xc37b (incorrect -> 0x8c47), ack 1122, win 19920, length 0 14:59:32.045310 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 312) 192.168.33.1.36522 > 192.168.33.15.22: Flags [P.], seq 1122:1394, ack 483, win 14600, length 272 14:59:32.045322 IP (tos 0x10, ttl 64, id 53781, offset 0, flags [DF], proto TCP (6), length 40) 192.168.33.15.22 > 192.168.33.1.36522: Flags [.], cksum 0xc37b (incorrect -> 0x8b37), ack 1394, win 19920, length 0 14:59:32.925726 IP (tos 0x10, ttl 64, id 53782, offset 0, flags [DF], proto TCP (6), length 1112) 192.168.33.15.22 > 192.168.33.1.36522: Flags [.], seq 483:1555, ack 1394, win 19920, length 1072 14:59:32.925750 IP (tos 0x10, ttl 64, id 53784, offset 0, flags [DF], proto TCP (6), length 312) 192.168.33.15.22 > 192.168.33.1.36522: Flags [P.], seq 1555:1827, ack 1394, win 19920, length 272 14:59:32.927131 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 40) 192.168.33.1.36522 > 192.168.33.15.22: Flags [.], cksum 0x9bcf (correct), ack 1555, win 14600, length 0 14:59:32.927148 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 40) 192.168.33.1.36522 > 192.168.33.15.22: Flags [.], cksum 0x9abf (correct), ack 1827, win 14600, length 0 14:59:32.932248 IP (tos 0x10, ttl 64, id 53785, offset 0, flags [DF], proto TCP (6), length 56) 192.168.33.15.22 > 192.168.33.1.36522: Flags [P.], cksum 0xc38b (incorrect -> 0xd247), seq 1827:1843, ack 1394, win 19920, length 16 14:59:32.932366 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 40) 192.168.33.1.36522 > 192.168.33.15.22: Flags [.], cksum 0x9aaf (correct), ack 1843, win 14600, length 0 14:59:32.964295 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 104) 192.168.33.1.36522 > 192.168.33.15.22: Flags [P.], seq 1394:1458, ack 1843, win 14600, length 64 14:59:32.964310 IP (tos 0x10, ttl 64, id 53786, offset 0, flags [DF], proto TCP (6), length 40) 192.168.33.15.22 > 192.168.33.1.36522: Flags [.], cksum 0xc37b (incorrect -> 0x85a7), ack 1458, win 19920, length 0 14:59:32.964561 IP (tos 0x10, ttl 64, id 53787, offset 0, flags [DF], proto TCP (6), length 88) 192.168.33.15.22 > 192.168.33.1.36522: Flags [P.], seq 1843:1891, ack 1458, win 19920, length 48 14:59:32.965185 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 40) 192.168.33.1.36522 > 192.168.33.15.22: Flags [.], cksum 0x9a3f (correct), ack 1891, win 14600, length 0 14:59:32.965196 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 104) 192.168.33.1.36522 > 192.168.33.15.22: Flags [P.], seq 1458:1522, ack 1891, win 14600, length 64 14:59:32.965233 IP (tos 0x10, ttl 64, id 53788, offset 0, flags [DF], proto TCP (6), length 88) 192.168.33.15.22 > 192.168.33.1.36522: Flags [P.], seq 1891:1939, ack 1522, win 19920, length 48 14:59:32.965970 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 40) 192.168.33.1.36522 > 192.168.33.15.22: Flags [.], cksum 0x99cf (correct), ack 1939, win 14600, length 0 14:59:32.965979 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 568) 192.168.33.1.36522 > 192.168.33.15.22: Flags [P.], seq 1522:2050, ack 1939, win 14600, length 528 14:59:32.966112 IP (tos 0x10, ttl 64, id 53789, offset 0, flags [DF], proto TCP (6), length 520) 192.168.33.15.22 > 192.168.33.1.36522: Flags [P.], seq 1939:2419, ack 2050, win 19920, length 480 14:59:32.970059 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 40) 192.168.33.1.36522 > 192.168.33.15.22: Flags [.], cksum 0x95df (correct), ack 2419, win 14600, length 0 14:59:32.970089 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 616) 192.168.33.1.36522 > 192.168.33.15.22: Flags [P.], seq 2050:2626, ack 2419, win 14600, length 576 14:59:32.981159 IP (tos 0x10, ttl 64, id 53790, offset 0, flags [DF], proto TCP (6), length 72) 192.168.33.15.22 > 192.168.33.1.36522: Flags [P.], cksum 0xc39b (incorrect -> 0xa84f), seq 2419:2451, ack 2626, win 19920, length 32 14:59:32.982347 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 40) 192.168.33.1.36522 > 192.168.33.15.22: Flags [.], cksum 0x937f (correct), ack 2451, win 14600, length 0 14:59:32.982357 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 104) 192.168.33.1.36522 > 192.168.33.15.22: Flags [P.], seq 2626:2690, ack 2451, win 14600, length 64 14:59:32.982401 IP (tos 0x10, ttl 64, id 53791, offset 0, flags [DF], proto TCP (6), length 88) 192.168.33.15.22 > 192.168.33.1.36522: Flags [P.], seq 2451:2499, ack 2690, win 19920, length 48 14:59:32.982570 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 40) 192.168.33.1.36522 > 192.168.33.15.22: Flags [.], cksum 0x930f (correct), ack 2499, win 14600, length 0 14:59:32.982702 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 104) 192.168.33.1.36522 > 192.168.33.15.22: Flags [P.], seq 2690:2754, ack 2499, win 14600, length 64 14:59:33.020066 IP (tos 0x10, ttl 64, id 53792, offset 0, flags [DF], proto TCP (6), length 40) 192.168.33.15.22 > 192.168.33.1.36522: Flags [.], cksum 0xc37b (incorrect -> 0x7e07), ack 2754, win 19920, length 0 14:59:33.983503 IP (tos 0x10, ttl 64, id 53793, offset 0, flags [DF], proto TCP (6), length 72) 192.168.33.15.22 > 192.168.33.1.36522: Flags [P.], cksum 0xc39b (incorrect -> 0x2aa7), seq 2499:2531, ack 2754, win 19920, length 32 14:59:33.983810 IP (tos 0x10, ttl 64, id 53794, offset 0, flags [DF], proto TCP (6), length 88) 192.168.33.15.22 > 192.168.33.1.36522: Flags [P.], seq 2531:2579, ack 2754, win 19920, length 48 14:59:33.984100 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 40) 192.168.33.1.36522 > 192.168.33.15.22: Flags [.], cksum 0x92af (correct), ack 2531, win 14600, length 0 14:59:33.984139 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 40) 192.168.33.1.36522 > 192.168.33.15.22: Flags [.], cksum 0x927f (correct), ack 2579, win 14600, length 0 14:59:34.022914 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 104) 192.168.33.1.36522 > 192.168.33.15.22: Flags [P.], seq 2754:2818, ack 2579, win 14600, length 64 14:59:34.022939 IP (tos 0x10, ttl 64, id 53795, offset 0, flags [DF], proto TCP (6), length 40) 192.168.33.15.22 > 192.168.33.1.36522: Flags [.], cksum 0xc37b (incorrect -> 0x7d77), ack 2818, win 19920, length 0 14:59:34.023554 IP (tos 0x10, ttl 64, id 53796, offset 0, flags [DF], proto TCP (6), length 88) 192.168.33.15.22 > 192.168.33.1.36522: Flags [P.], seq 2579:2627, ack 2818, win 19920, length 48 14:59:34.027571 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 40) 192.168.33.1.36522 > 192.168.33.15.22: Flags [.], cksum 0x920f (correct), ack 2627, win 14600, length 0 14:59:34.027603 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 4100) 192.168.33.1.36522 > 192.168.33.15.22: Flags [P.], seq 2818:6878, ack 2627, win 14600, length 4060

  Read the article

• Problem with TL-R480T+ and static routes

  - by Globulopolis

  Hi! I've some question about this router. Before starting, some configurations, specified by my provider. Wan1 VPN IP - 192.168.172.84 Mask - 255.255.255.0 Gateway - 192.168.172.253 DNS - 195.110.6.7 Wan2 Dynamic IP DHCP - 168.120.1.34 Mask - 255.255.255.0 Router IP 192.168.1.1 Computer IP 192.168.1.7 Routes: route -p add 192.168.0.0 mask 255.255.0.0 192.168.172.253 route -p add 195.110.6.0 mask 255.255.254.0 192.168.172.253 route -p add 88.135.112.0 mask 255.255.240.0 192.168.172.253 route -p add 178.219.160.0 mask 255.255.240.0 192.168.172.253 For first provider I need to provide a routes. 'Cause router does not support different routes for different WAN interfaces I put them in "Static routes". But when I try to save them I've got an error: Destination IP address can not be set in a same subnet with the WAN or LAN IP address. If I change IP's to local like 192.168.x.x router tell me: Gateway must be set in a same subnet with WAN or LAN IP address. Changing mask on WAN1 interface to 255.255.0.0 doesn't help. Any ideas? PS! Or maybe I'm must email to TP-Link support?

  Read the article

• Publish Static Content to WebLogic

  - by James Taylor

  Most people know WebLogic has a built in web server. Typically this is not an issue as you deploy java applications and WebLogic publishes to the web. But what if you just want to display a simple static HTML page. In WebLogic you can develop a simple web application to display static HTML content. In this example I used WLS 10.3.3. I want to display 2 files, an HTML file, and an xsd for reference. Create a directory of your choice, this is what I will call the document root. mkdir /u01/oracle/doc_root Copy the static files to this directory  In the document root directory created in step 1 create the directory WEB-INF mkdir WEB-INF In the WEB-INF directory create a file called web.xml with the following content <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/j2ee/dtds/web-app_2_3.dtd"> <web-app> </web-app> Login to the WebLogic console to deploy application Click on Deployments Click on Lock & Edit Click Install and set the path to the directory created in step 1 Leave default "Install this deployment as an application" and click Next Select a Managed Server to deploy to and click Next Accept the defaults and click Finish  Deployment completes successfully, now click the Activate Changes You should now see the application started in the deployments You can now access your static content via the following URL http://localhost:7001/doc_root/helloworld.html

  Read the article

• How to lookup an IP address in an Excel spreadsheet?

  - by Kevin Williams

  I am working with a decent sized spreadsheet of domains and server names. Another user of the spreadsheet needs the IP address for each of the DNS entries on the worksheet. Instead of manually adding and then having to maintain this list I was hoping there was an easy way to do an IPAddress lookup to display the IP address in a cell. I've seen some VBScripts that call gethostbyname, e.g.: Declare Function GetHostByName Lib "wsock32.dll" Alias "gethostbyname" (ByVal Host As String) As Long But I'm not a VB expert so I'm not sure if this is the right way to go. Any advice/links would be appreciated! also if this is a question better suited for Stack Overflow - let me know, I'm new here.

  Read the article

• Windows CE: Changing Static IP Address

  - by Bruce Eitman

  A customer contacted me recently and asked me how to change a static IP address at runtime.  Of course this is not something that I know how to do, but with a little bit of research I figure out how to do it. It turns out that the challenge is to request that the adapter update itself with the new IP Address.  Otherwise, the change in IP address is a matter of changing the address in the registry for the adapter.   The registry entry is something like: [HKEY_LOCAL_MACHINE\Comm\LAN90001\Parms\TcpIp]    "EnableDHCP"=dword:0    "IpAddress"="192.168.0.100"     "DefaultGateway"="192.168.0.1"    "Subnetmask"="255.255.255.0" Where LAN90001 would be replace with your adapter name.  I have written quite a few articles about how to modify the registry, including a registry editor that you could use. Requesting that the adapter update itself is a matter of getting a handle to the NDIS driver, and then asking it to refresh the adapter.  The code is: #include <windows.h> #include "winioctl.h" #include "ntddndis.h"   void RebindAdapter( TCHAR *adaptername ) {       HANDLE hNdis;       BOOL fResult = FALSE;       int count;         // Make this function easier to use - hide the need to have two null characters.       int length = wcslen(adaptername);       int AdapterSize = (length + 2) * sizeof( TCHAR );       TCHAR *Adapter = malloc(AdapterSize);       wcscpy( Adapter, adaptername );       Adapter[ length ] = '\0';       Adapter[ length +1 ] = '\0';           hNdis = CreateFile(DD_NDIS_DEVICE_NAME,                   GENERIC_READ | GENERIC_WRITE,                   FILE_SHARE_READ | FILE_SHARE_WRITE,                   NULL,                   OPEN_ALWAYS,                   0,                   NULL);         if (INVALID_HANDLE_VALUE != hNdis)       {             fResult = DeviceIoControl(hNdis,                         IOCTL_NDIS_REBIND_ADAPTER,                         Adapter,                         AdapterSize,                         NULL,                         0,                         &count,                         NULL);             if( !fResult )             {                   RETAILMSG( 1, (TEXT("DeviceIoControl failed %d\n"), GetLastError() ));             }             CloseHandle(hNdis);       }       else       {             RETAILMSG( 1, (TEXT("Failed to open NDIS Handle\n")));       }   }       int WINAPI WinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPWSTR    lpCmdLine, int       nCmdShow) {     RebindAdapter( TEXT("LAN90001") );     return 0; }   If you don’t want to write any code, but instead plan to use a registry editor to change the IP Address, then there is a command line utility to do the same thing.  NDISConfig.exe can be used: Ndisconfig adapter rebind LAN90001    Copyright © 2012 – Bruce Eitman All Rights Reserved

  Read the article

• Using IP Restrictions with URL Rewrite-Week 25

  - by OWScott

  URL Rewrite offers tremendous flexibility for customizing rules to your environment. One area of functionality that is often desired for URL Rewrite is to allow a large list of approved or denied IP addresses and subnet ranges. IIS’s original IP Restrictions is helpful for fully blocking an IP address, but it doesn’t offer the flexibility that URL Rewrite does. An example where URL Rewrite is helpful is where you want to allow only authorized IPs to access staging.yoursite.com, but where staging.yoursite.com is part of the same site as www.yoursite.com. This requires conditional logic for the user’s IP. This lesson covers this unique situation while also introducing Rewrite Maps, server variables, and pairing rules to add more flexibility. This is week 25 of a 52 week series for the Web Pro. Past and future videos can be found here: http://dotnetslackers.com/projects/LearnIIS7/ You can find this week’s video here.

  Read the article

• Managing JS and CSS for a static HTML web application

  - by Josh Kelley

  I'm working on a smallish web application that uses a little bit of static HTML and relies on JavaScript to load the application data as JSON and dynamically create the web page elements from that. First question: Is this a fundamentally bad idea? I'm unclear on how many web sites and web applications completely dispense with server-side generation of HTML. (There are obvious disadvantages of JS-only web apps in the areas of graceful degradation / progressive enhancement and being search engine friendly, but I don't believe that these are an issue for this particular app.) Second question: What's the best way to manage the static HTML, JS, and CSS? For my "development build," I'd like non-minified third-party code, multiple JS and CSS files for easier organization, etc. For the "release build," everything should be minified, concatenated together, etc. If I was doing server-side generation of HTML, it'd be easy to have my web framework generate different development versus release HTML that includes multiple verbose versus concatenated minified code. But given that I'm only doing any static HTML, what's the best way to manage this? (I realize I could hack something together with ERB or Perl, but I'm wondering if there are any standard solutions.) In particular, since I'm not doing any server-side HTML generation, is there an easy, semi-standard way of setting up my static HTML so that it contains code like <script src="js/vendors/jquery.js"></script> <script src="js/class_a.js"></script> <script src="js/class_b.js"></script> <script src="js/main.js"></script> at development time and <script src="http://ajax.googleapis.com/ajax/libs/jquery/1.8.2/jquery.min.js"></script> <script src="js/entire_app.min.js"></script> for release?

  Read the article

• google.com different IP in different countries. How?

  - by HeavyWave

  If you ping google.com from different countries you will get replies from local google servers. How does that work? Can a DNS record have multiple A addresses? Could someone point me to the technology they use to do that? Update. OK, so Google's DNS server gives out a different IP based on the location. But, as Alexandre Jasmin pointed out, how do they track the location? Surely their DNS won't ever see your IP address. Is the server querying Google's DNS guaranteed to be from the location it represents?

  Read the article

• Two different sites, same IP, same top-level domain, on IIS 7.5 -- one works and the other displays HTTP 404 error

  - by user717236

  I'm running a Windows 2008 R2 box with IIS 7.5 as the web server. On IIS, I have two websites: mysubsite1.mysite.com and mysubsite2.mysite.com. There is only one IP on the server and both sites share this IP. Here is how I have the bindings configured: mysubsite1.mysite.com works fine. However, mysubsite2.mysite.com gives me the following error: Not Found HTTP Error 404. The requested resource is not found. Now, if I change the Host name field for mysubsite1.mysite.com to blank and restart the web server, both sites work! The question is why is the host name field for the first site causing an HTTP 404 error for the second site when both sites' Host name fields are filled? I would appreciate any insight. Thank you.

  Read the article

• Is your IP address neighborhood important for SEO?

  - by Evgeny

  Can other websites on your shared host affect the rank of your website in the Google index? (same IP address as yours, potentially malicious/low-trust content) Can other websites on your IP class affect the rank of your website in the Google index? (different actual IP, malicious/low-trust content) Clarification: Domain class, is what you get when you run a whois query on an IP address. Example: NetRange: 69.163.128.0 - 69.163.255.255 CIDR: 69.163.128.0/17 PS: Prefer answers with experience or links to trustworthy material, over speculations, assumptions and gut feelings.

  Read the article

• how to get IP adress of google search/crawler bot to add to our white list of ip address

  - by Jayapal Chandran

  Hi, Google webmaster tools says network unreachable. When i contacted my hosting provider they said that they have installed firewall which could block frequent incoming ip addresses and they dont know the google's ip adress to unblock. so they requested me to find google search/crawler bot's ip adress so that they can add it to their whitelist. How to find the ip address of google search bot or crawler bot? My site stopped appearing in google search. My hits had gone too low. What should i do? any kind of reply would he helpful.

  Read the article

• Add static ARP entries when network is brought up

  - by jozzas

  I have some pretty dumb IP devices on a subnet with my Ubuntu server, and the server receives streaming data from each device. I have run into a problem in that when an ARP request is issued to the device while it is streaming data to the server, the request is ignored, the cache entry times out and the server stops receiving the stream. So, to prevent the server from sending ARP requests to these devices altogether, I would like to add a static ARP entry for each, something like arp -i eth2 -s ip.of.the.device mac:of:the:device But these "static" ARP entries are lost if networking is disabled / enabled or if the server is rebooted. Where is the best place to automatically add these entries, preferably somewhere that will re-add them every time the interface eth2 is brought up? I really don't want to have to write a script that monitors the output of arp and re-adds the cache entries if they're missing. Edit to add what my final script was: Created the file /etc/network/if-up.d/add-my-static-arp With the contents: #!/bin/sh arp -i eth0 -s 192.168.0.4 00:50:cc:44:55:55 arp -i eth0 -s 192.168.0.5 00:50:cc:44:55:56 arp -i eth0 -s 192.168.0.6 00:50:cc:44:55:57 And then obviously add the permission to allow it to be executed: chmod +x /etc/network/if-up.d/add-my-static-arp And these arp entries will be manually added or re-added every time any network interface is brought up.

  Read the article

• How to get two seperate remote domain controllers with same IP to work?

  - by Mr. Mister

  Hi, I have a VPN setup between multiple locations. Between each location and the central point (me), is a trust between our domain controllers. It all works great.. A new location wants to join, but their AD controller is using an IP address that is already in use by another AD in a separate location. Neither locations can change their IP addresses, but apparently there is a NAT rule that could be used to allow communication between each AD controller? The central site has a Cisco 5510 firewall which could perform the NAT, but I am unsure of the logic behind the NAT rule. Is anyone able to explain or help out? Thanks.

  Read the article

< Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >