Search Results

Search found 2374 results on 95 pages for 'stops'.

Page 42/95 | < Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >

  • PC Speaker sounds when machine locks up.

    - by d.c
    What would cause my PC speaker to sound a low frequency continuous tone as my system locks up? Generally what will happen is I'll notice the application I'm using will stop responding but explorer will be partially responsive, then after a few more actions explorer stops responding, and the last click will cause the pc speaker to emit a low constant tone as the machine locks up completely. The only resolve at that point is to restart. Its not a thermal issue, I'm reading the cpu, and hdd temps with software and hardware monitors. AV and malware scans come up clean. I've swapped out my ram, reseated all my components. Used sfc with no results. chkdisk locks up at 3% and defragmenting does the same, but I can read the drive without trouble (I know this as I've done av/malware scans and I also backed everything up since this started happening) I'm mostly just interested to learn, if anyone knows, why the pc speaker would sound during the lock up. windows xp sp2

    Read the article

  • Windows server backup fails at 40%

    - by Abraham Borbujo
    I´m configuring windows server backup as full system backup. It starts fine, but when it´s making system drive (c:) backup it stops at 40% every time i try. It only backups 7.28 GB of the total 18.19 GB. I tried changing destination drive and also checking c: filesystem in order to find any problem, but it seems to be ok and the problem is still the same. I got a message telling that the backup is completed with warnings. The warning details says that it didn´t complete backup because of input/output error in source or destination. Thanks for your help.

    Read the article

  • Sound leaks from speaker even when headphones are inserted

    - by instantsetsuna
    I've a Dell Optiplex 960 (which I presume has a speaker inside the tower). This speaker is normally in use whenever I play music (lets call this "tower speaker"), and when I insert my headphones in the 3.5mm jack (of the tower), the tower speaker stops and the music is played through the headphones (an obvious thing to happen). But sometimes, the tower speaker starts playing the music even when the headphones are inserted! So, the music is played through both of them! This gets quite embarrassing. So, my question is - Is there a way to turn off this "tower speaker"? EDIT : I'm using Windows XP

    Read the article

  • Computer only booting after POWER ON/OFF 10 times or more?

    - by Jan Gressmann
    Hi fellow geeks, recently my computer started to behave like an old car and won't start up anymore unless I flip the power switch repeatedly. What happens when I power it on: CPU fans spins briefly and very slowly, then it stops Same with GPU fan No BIOS beeps or HDD activity Screen stays black After turning it on and off for like 10 times, it'll eventually boot like normal and run smooth without any problems what-so-ever. But I'm worried it might eventually die completely. Anyone know the most common cause of this? Maybe I should just leave the computer powered on? :)

    Read the article

  • Windows 7 Pro x64 suffering from insomnia

    - by gemisigo
    My Win 7 Pro x64 is unable to enter sleep mode. Pressing the sleep button results in strange state where the computer starts entering the sleep mode, the display is turned off but then the whole process stops, it does not switch off the hdd, the keyboard still responds to numlock/capslock, but the display does not on anymore. I have to cut power and restart. If I remove everything (wireless mouse, external hdd, usb hub, etc.) it does enter sleep mode, but if there is something left, it does not, though every one of them has "Allow the computer to turn off this device..." checked and "Allow this device to wake the computer" unchecked. Why does it not work? It was working properly in the RC.

    Read the article

  • How do I PXE Boot Only when I want it to without user intervention?

    - by troz123
    I would like to setup a PXE environment where I can re-image machines remotely without any user intervention. Only problem is when the re-imaging is completed it will do the re-imaging again and again and again. If I remove the MAC address file then I just get a error saying it can't find the MAC address file and the system stops. I also tried turning off the TFTP server and I get a error stating can't find TFTPD server. How can I make client machines only PXE boot once and after the re-imaging it will boot into Windows and everything is happy? And only PXE boot when I want it too... I'm using TFTPD32 to serve the files. I'm using a Windows 2003 DHCP server that points to pxelinux.0...

    Read the article

  • Installing OpenVPN on Windows7

    - by Darcara
    It seems I cannot install the current version of OpenVPN (2.1.2) because the TAP driver is not signed and therefore windows 7 x64 refuses to install it. It shows up in the device manager, but with a yellow exclamation mark. It's a fresh system, and OpenVPN was never installed before. When I start the OpenVPN client it seems to connect fine, but then it stops with CreateFile failed on TAP device: ... All TAP-Win32 adapters on this system are currently in use. How can I install the unsigned drivers, or are there signed drivers available somewhere ?

    Read the article

  • Sound leaks from speaker even when headphones are inserted

    - by instantsetsuna
    I've a Dell Optiplex 960 (which I presume has a speaker inside the tower). This speaker is normally in use whenever I play music (lets call this "tower speaker"), and when I insert my headphones in the 3.5mm jack (of the tower), the tower speaker stops and the music is played through the headphones (an obvious thing to happen). But sometimes, the tower speaker starts playing the music even when the headphones are inserted! So, the music is played through both of them! This gets quite embarrassing. So, my question is - Is there a way to turn off this "tower speaker"? EDIT : I'm using Windows XP

    Read the article

  • How can I find out what's uploading traffic to the internet?

    - by Nick G
    Some program I'm running is constantly uploading to the Internet. It's uploaded 300MB in the last few hours. I could reboot and see if it stops, but I'd prefer to find out what it is if possible. I've tried using the resource monitor but it's totally nonsensical - even if I run a broadband speedtest, it barely registers any traffic. Ideally I'd like to find a tool which can tell me the current bandwidth of each application. I think NetLimiter used to work on XP but it's not supported for Windows 7.

    Read the article

  • How does Windows 7 determine that a system was not shut doen correctly (Kernel-Pwer Event ID 41)

    - by Erik
    I have a strange situation that Windows 7 thinks it was not shut down correctly, and gives me a warning in the system event log like this: http://support.microsoft.com/kb/2028504/de What the KB-article does not tell is how Windows actually determines that situation. Does it parse its own system event log after reboot? Or where does it get that information from? I am currently investigating an issue where I believe the system fails to write the system event log correctly (it stops having entries, although other logs like the application event log still have entries), and after a reboot, Windows thinks it has not been shut doen correctly. Does anybody have any experience with this? ANd can you confrim that Windows determines the previous correct system shutdown by parsing its own system event log on startup?

    Read the article

  • Server browser resolves localhost, but not server name

    - by user147795
    I have a 2008 R2 server that I recently installed Solarwinds on. It is running IIS V7.5. I got the Solarwinds site loaded into IIS, however I can't resolve it when using the server name. It will however resolve when I put http:// localhost into the browser. I have tried editing the Hosts file to no avail. I have also played around with our DNS server to see if I can figure anything out there. I mess with the bindings in IIS, when I remove the binding for "localhosts" it stops resolving. But still get DNS lookup failed if I add the actual server name to the binding. Any ideas?

    Read the article

  • How can I disable automatic send / receive for Outlook 2010 for Mac?

    - by ATSiem
    There are lots of answers to disable automatic send / receive for Outlook for Windows, but not for Mac. Does anyone know how to do this for Outlook 2010 for Mac? The options offer no obvious capability, I've disabled all my 'Schedules' and defined it to 'Send All' and 'Send & Receive All' manually... but nothing stops emails from going in and out of my inbox at their will! You can see my screenshot... I've tried this both enabled and disabled. Thanks! Adam

    Read the article

  • Black screen on Windows 7 right after opening Google Sketchup or Minecraft

    - by Aero
    I get a black screen on Windows 7 right after opening Google Sketchup or Minecraft. I presume there are other applications that cause this too - but I have not tried to open them. The window initially stops responding for a few seconds, before I get a black screen and my Skype call ends abruptly. I have tried waiting for a few minutes but nothing happens. I have to power down my computer and then boot it up again. This is becoming an annoyance, and I don't know what's causing it. Here are my specs, if it helps: My graphics card is an ATI RADEON XPRESS 1100. If you need any more info or if I've missed anything please ask. Thanks :-)

    Read the article

  • Why is my Windows XP not allowing me to turn on sounds?

    - by Rookie
    This started to happen few weeks ago: Every time I start up Windows, the global sound volume is set to muted. I was able to just click the muted button to un-muted and that was fine, until now: Now I cant even click that unmute button! Every time I click the unmute button, I hear a split of a second the music I play, then it stops immediately. It is maybe 10 milliseconds until it mutes it again. In theory I could write a program to click that button continuously, but is there another solution to fix this? Or is this a broken hardware problem and Windows knows it and therefore doesn't allow me to enable sounds or my computer would break apart? Any ideas what could be causing this? A weird virus that's purpose is to piss me off? That weird this whole issue is, really, doesn't make any sense at all.

    Read the article

  • Is it possible to mod_rewrite BASED on the existence of a file/directory and uniqueID? [closed]

    - by JM4
    My site currently forces all non www. pages to use www. Ultimately, I am able to handle all unique subdomains and parse correctly but I am trying to achieve the following: (ideally with mod_rewrite): when a consumer visits www.site.com/john4, the server processes that request as: www.site.com?Agent=john4 Our requirements are: The URL should continue to show www.site.com/john4 even though it was redirected to www.site.com?index.php?Agent=john4 If a file (of any extension OR a directory) exists with the name, the entire process stops an it tries to pull that file instead: for example: www.site.com/file would pull up (www.site.com/file.php if file.php existed on the server. www.site.com/pages would go to www.site.com/pages/index.php if the pages directory exists). Thank you ahead of time. I am completely at a crapshot right now.

    Read the article

  • TrueCrypt - "Warning! Password locked: Fixed disk0" error message on boot

    - by Tibi
    TrueCrypt - "Warning! Password locked: Fixed disk0" error message on boot. When i start my laptop (Acer TravelMate 2410). after the starting memory check, the screen goes full black, and a message appears for about 3 seconds: Warning! Password locked: Fixed disk0 and after that, disappears, and next message comes out: Operating System Not Found and all stops here. Windows Xp was installed on it, before this came. TrueCrypt cd (witch was made during the process of full encryption) is not working, not in restoring MBR, no even in decrypting my drive - completely useless. Note: I detected some short of boot sector errors (i dont know the amount) on my drive before this happened. Please, i would greatfully thank every comment, or suggestion, because my computer is unusable now. The HDD is a Samsung HDD, 160Gb. Other preferences: Acer TravelMate 2410 Notebook, 2 Gb RAM, 1500 Mhz Intel Celeron M processor. Regards

    Read the article

  • Can't get iptables firewall working correctly

    - by Jay
    I'm setting up a new Centos 5.6 system and can't get my iptables firewall to work correctly. it won't let me use SSH through it. I'm new to Centos but not to Linux or iptables. I've been removing things until I have isolated the problem. I set up the firewall with a default ACCEPT rule for the INPUT chain. I can connect through to the server fine. If I change the command to only allow traffic from the interface connecting to my trusted network it stops working. Working: iptables -A INPUT -s 0/0 -d 0/0 -j ACCEPT Failing: iptables -A INPUT -i eth0 -s 0/0 -d 0/0 -j ACCEPT I've double checked the ip address I'm using corresponds to eth0 using ifconfig. Any ideas where I went wrong?

    Read the article

  • Dual Monitors don't turn off/sleep when they should

    - by Mario
    Details: Dual 25" monitors connected to HP Envy via HDMI and display port via DVI adapter. Power scheme is set up in high performance (Dim Display: Never - Turn Off Display: 15 mins - Computer Sleep: Never) Screensaver is set up to kick in after 10 mins of idle (which happens) 5 minutes later, the screensaver stops. The "Monitor Going to Sleep" notice appears on screen and monitors go to sleep briefly. All is well thus far. Suddenly, the Windows 7 alert sound when a device is unplugged is heard. Monitors then turn back on. Screens are black. Only the mouse cursor is displayed. Backlighting is back on. This only started happening after I obtained and connected the second 25" monitor a few days ago. However, I had a 24" in its place before, and this wasn't happening. Why is this happening and how do I correct this behavior? Thanks in advance.

    Read the article

  • Ubuntu Studio 10.4 boots to terminal mode only

    - by Don
    I did clean install from ISO DVD. It boots only to command line asking for login. After I login I enter STARTX and desktop appears and some of the studd actually works, but there are a lot of problems: there is no way to reboot or shut down except to stopx/logoff and enter shutdown sound system doesn't respond pulse audio volume control gives "connection failed, connection refused" DVD drives not available GDebi Package installer is grayed out and so I can't use it (but synaptic package manager works OK) Software Center won't start when clicked -- it just stops trying DBus cant run because it says /usr/local/var/run/dbus/system_bus_socket file not found (also /var/run/dbus/system_bus_socket file not found) There's just a lot of things wrong and I can't help but think something is missing or was mis-coded in the distro so that there are typos in some script somewhere. If anyone can tell me where to begin to untangle this mess I'd appreciate it, but I think it all begins when it can't start the GUI automatically and I need to enter STARTX.

    Read the article

  • Internet connection issues after installing Windows Phone 8 SDK

    - by Mosquito
    first of all I must admit, that I'm not good in all this network stuff. I am using Windows 8 OS. On my laptop (Lenovo G570) I have installed Windows Phone 8 SDK and shortly after this I started having weird issues with internet connection. When I start my laptop, internet usually works fine, but after a few minutes it starts slowing down so much, that I'm not able to open a single page. Rebooting doesn't work, after several disabling and enabling network adapter, it usually works again for a few minutes and then again it stops. I'm sure it has something to do with Windows Phone 8 SDK, because problems started with this. With SDK there was also installed "vEthernet (Internal Ethernet Port Windows Phone Emulator Internal Switch)" network adapter. It is worth to note that problems occur mostly in my school network, not at home. Both at home and school I am using Wi-Fi connection. I hope the information given are enough to help me. Thanks in advance for any answers!

    Read the article

  • OpenVPN on port 53

    - by TossUser
    I have an openvpn server setup on UDP port 53 on a public IP. All the connecting clients gets pushed external DNS servers such as 8.8.8.8 and opendns. Sometimes the resolution stops working on the connected vpn clients and I get strange packets in the openvpn log. Now my question is why is that? When a VPN client, let's say 192.168.1.22 does a DNS query that query should go to 8.8.8.8:53 and then an UDP response packet should be sent back to 192.168.1.22 on a high UDP port. Any ideas? Thanks

    Read the article

  • Can Camel Jetty proxy URL share the webapplication context

    - by user1750353
    I am struggling with Camel Jetty Proxy Routes. At times, the routes exhibits inconsistent behavior. My Proxy app deployed with context root "Proxy", however, if give that as the context path for my proxy URL I get service not found error. If change the Proxy to an arbitrary context such as "Dummy" then the route works. Is that how camel jetty component works? From Path: jetty:http://0.0.0.0:6080/Proxy/PurchaseOrder/?matchOnUriPrefix=true&disableStreamCache=true&traceEnabled=true To Path: jetty:http://localhost:7001/Provider/PurchaseOrder/?bridgeEndpoint=true&throwExceptionOnFailure=false Another issue i noticed with jetty is If deploy both Proxy and Provider on the same app container(same listening port), then the route completely stops working saying "Provider/PurchaseOrder/" service not found. The only way the routes work is, both routes have to run different ports and the from route shouldn't share the webcontext path. I have requirement that if required I should be a able run both Proxy and Provider on the same container. Any help appreciated. Thanks,

    Read the article

  • Sennheiser PC360 Microphone Suddenly Stopped Working

    - by Michaelwm
    Just recently, my Sennheiser PC360's microphone stopped working. Yesterday Night, it was working 100% fine. Muting correctly, un-muting, volume boosting, etc. I woke up this morning, and got into a skype call (After not changing a single setting on my computer), and it wasn't working. I tried mumble, and it didn't work there either. After that, I checked my sound devices and found out it was plugged in, but not responding to my voice. I unplugged the headset, and it correctly showed that it was unplugged. So, a quick run-down: Sennheiser PC360 Headset suddenly stops working after a few hours of sleep. Software is up to date I can hear the mute sound when I raise and lower the microphone arm Windows Sound Device Manager shows that it is plugged in Unplugging the headset correctly shows it is unplugged Windows Sound Device Manager shows that the microphone isn't receiving any input

    Read the article

  • Disable RDC Welcome Screen in Windows 2008 R2

    - by mikebridge
    Is there a way to disable or bypass the "Welcome" screen I see when I'm using RDC to log in to a machine using saved credentials? I have startup task which launches an RDP session automatically to localhost when the machine boots. This works, except that the remote desktop window stops and waits for an "OK" on the Welcome screen: MACHINENAME-A.B.C.D(Server ID:Console 0) Welcome [OK] This screen is preventing me from automating this login. Is there any way to get around it? EDIT: Here's the command line I'm currently using to launch it: start /min C:\windows\system32\mstsc.exe c:\rdp\ServiceRunner.rdp

    Read the article

  • Change Windows 7 Explorer's Details Pane limits

    - by Paul
    For some reason, MS decided to completely kill the status bar's functionality in Win7 (and maybe Vista, but I don't know for sure). I have tried all possible options such as Classic Shell and so on. Basically, the one thing I miss most is seeing at a glance the total size of my selected files. I know I can press Alt+Enter or whatever, but that's not the point. The point is that the so-called 'details' pane stops providing details if more than 15 files are selected! WTH? Cannot understand the reason behind such a stupid arbitrary limit, that doesn't seem to be user-configurable at all. Anyway, what I'm looking for is a way to change that limit, either via the registry or otherwise. Is this at all possible?

    Read the article

< Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >