Search Results

Search found 15966 results on 639 pages for 'connection'.

Page 420/639 | < Previous Page | 416 417 418 419 420 421 422 423 424 425 426 427  | Next Page >

• stunnel: SSL-to-SSL? (for smtp/imap)

  - by nonot1

  Hello, How can I configure stunnel to accpet SSL connections, and connect then to an SSL port on a different server? Here is my setup: Our ISP's server, "Mail Server", supports smtp/imap over SSL. (Not starttls. Just over ssl.) But, I have a bunch of client machines that will only trust a specific, internal, root certificate. Thus, they can not connect to "Mail Server". For these client machines, I'd like to make a dedicated "Mail Tunnel" host that uses stunnel to listen with an in-house signed SSL certificate, and just forward data to "Mail Server" using a 2nd SSL connection. Can this be done? What would be the specific steps for Ubuntu Server 10.10? (I'm not too familiar with persistent service configuration.) Thank you

  Read the article

• Internet Exploer 8 - Internet Access Issue

  - by Paresh.Bijvani

  Hello, I am using IE8 since last 6 months and its working fine. I am using it by providing proxy server address. Suddenly it started not working today. Strange thing is that it fails to communicate with proxy server. It still work if I use modem as internet connection, its just has problem with proxy server communicationl. Even my Firefox is working fine. And all installed application like Yahoo Messanger and skype working fine. I also uninstalled and reinstalled, but no luck. Any work around? Have anybody faced this issue? Thanks Paresh

  Read the article

• Need help connecting to SRW2024 Linksys Switch from CentOS 5.4

  - by sxanness

  I am configured a Linksys SRW2024, I accidently changed the management VLAN before changing the VLAN configuration thus I can no longer access it with the net. The only way I have read to get into it now is via a console cable, my laptop with me is a MacBook Pro with no Serial port connection, apart from driving around a town that I am unfamilar with to find an adapter I thought I would try on a Linux box. I have a CentOS 5.4 server here (PowerEdge R300) that I am trying to use to talk to the switch. I tried minicom first but I do not see the console. Another site suggested the screen command. I tried "screen /dev/ttyS0 38400" but all I get is blinking curser, I do not see the configuration. I don't know if anyone here as any tips but I hope someone does. Thank You,

  Read the article

• Websocket & HTTP proxy with server between two firewalls

  - by Dan

  I have a server ("A") running behind a firewall, which serves HTTP and websockets. I have no control over the firewall, but do have an external server ("B") to which the internal server can connect (note that the reverse connection from B to A is not possible due to the firewall). How can I set up some sort of proxy on B such that an Internet client ("C") can access the resources on A? I'd prefer something lightweight—even a Python program or an SSH tunnel (which I've tried without success)—rather than something more heavyweight but robust.

  Read the article

• Is it unethical to sell the award of a competition? [closed]

  - by Ahmet Yildirim

  This summer, i won a competition held by microsoft & nokia... Winners from each uni. received an high-end smartphone... Knowing that particular "high-end smartphone" had not much user to develop for, as soon as i receive it, i put an ad on a ebay-like site to sell it. Eventually i exchanged it with a tablet which had high developer demand & many many users to develop for , so i could make money by developing for it. I also email microsoft asking, when something technical goes wrong with the device , can i get it fixed by warranty. Which i never received a respond. Later on, after a while... I got some feedback from a connection i have from nokia, regarding sale of the device & asking for the warranty.. He says and i quote : " They say, they werent happy that you sold the device and got offended that you asked for warranty. You should not expect anything at all from microsoft or nokia in the future. " I was like what the frak, they didnt gave it to me as a gift, i won it in a competition as an award , it is my right to do whatever i want. How ethical is that , they dont respond to my email directly? Is it unethical to sell a gadget you won in a competition? Is it unethical to ask for warranty on award?

  Read the article

• Please recommend tools for PC, browser, home network performance problems?

  - by mobibob

  My client is experiencing some odd response behavior in their browser for the past few days. Classic, "nothing has changed" so I am starting at ground zero. Browsing a website will timeout or take a ridiculous time to load -- other times, the same site and query is immediately responsive. Once a connection is established, video streams are uninterrupted. The home network hosts a website, but it is not experiencing any activity in Apache's 'access.log' I am using speedtest.net to check if the ISP through the internet is 'OK' -- which looks typical (average +/-). I have to suspect the home network is beaconing or something very abnormal, but I don't know where to start.

  Read the article

• Shared block device file system (cluster file system without networking)

  - by fungs

  Is there any file system that can be mounted multiple times and supports concurrent file access for Linux? Basically I want something like a cluster file system but without the need to have a running network for a distributed lock manager. That can be very handy in connection with virtual machines that can share data with the host or another VM without the need to create a network link. This I want to avoid to keep the network architecture secure (virtual machine in DMZ) but share large files. No need to scale it up, just two machines that mount the same block device. Shouldn't it be possible to have file locking information right on the disk?

  Read the article

• No sound through DisplayPort

  - by Chris Koknat

  I'm trying to connect my Elitebook 8440p laptop to my Samsung HDTV. The laptop does not have a HDMI connection, but it does have DisplayPort. I bought a DisplayPort-to-HDMI adapter here http://www.amazon.com/gp/product/B002CSRFD8/ref=oss_product, and connected it with a 3' HDMI cable. The video shows up fine, but there is no audio. DisplayPort, HDMI, and the adapter all support audio. I contacted HP tech support, who told me to update my sound drivers. I installed the driver and rebooted. Supposedly, I should see a "HD Audio" tab. No luck, even after installing the driver again and rebooting. HP closed the case. I'm using XP Pro.

  Read the article

• Prepared statement alternatives for this middle-man program?

  - by user2813274

  I have an program that is using a prepared statement to connect and write to a database working nicely, and now need to create a middle-man program to insert between this program and the database. This middle-man program will actually write to multiple databases and handle any errors and connection issues. I would like advice as to how to replicate the prepared statements such as to create minimal impact to the existing program, however I am not sure where to start. I have thought about creating a "SQL statement class" that mimics the prepared statement, only that seems silly. The existing program is in Java, although it's going to be networked anyways so I would be open to writing it in just about anything that would make sense. The databases are currently MySQL, although I would like to be open to changing the database type in the future. My main question is what should the interface for this program look like, and does doing this even make sense? A distributed DB would be the ideal solution, but they seem overly complex and expensive for my needs. I am hoping to replicate the main functionality of a distributed DB via this middle-man. I am not too familiar with sql-based servers distributing data (or database in general...) - perhaps I am fighting an uphill battle by trying to solve it via programming, but I would like to make an attempt at least.

  Read the article

• How to make VirtualBox headless answer on rdp port?

  - by stiv

  I'd like to run windows xp on RDP: $ VBoxManage modifyvm winxp32 --vrdeport 3389 $ VBoxHeadless -s winxp32 -v on Oracle VM VirtualBox Headless Interface 4.1.18_Debian (C) 2008-2012 Oracle Corporation All rights reserved. (waiting) in another window: $ telnet localhost 3389 Trying 127.0.0.1... telnet: Unable to connect to remote host: Connection refused Yes, I've read about extension: $ sudo VBoxManage extpack install Oracle_VM_VirtualBox_Extension_Pack-4.1.20-80170.vbox-extpack 0%... Progress state: NS_ERROR_FAILURE VBoxManage: error: Failed to install "Oracle_VM_VirtualBox_Extension_Pack-4.1.20- 80170.vbox-extpack": Extension pack 'Oracle VM VirtualBox Extension Pack' is already installed. In case of a reinstallation, please uninstall it first Looked through all manuals and all help requests. No success. What's wrong? Any ideas?

  Read the article

• What port does OpenLink ODBC Driver use?

  - by user36737

  I use Avaya Reporting Services and OpenLink ODBC Drivers for db connection. I know that it uses port 5000 for handshaking but after that I believe it uses an random port for communication. I want to deploy my application and it will communicate with the client's system in their datacenter. They are asking what ports should they open on their firewalls. I can't obviously give them a range above 50,000 that I know OpenLink ODBC Drivers use. Can someone tell me what port should I tell my client to open?

  Read the article

• How do I resolve the error "The file exists" when restoring a cube backup?

  - by Ant

  I'm trying to restore a cube backup (a .abf file) using SQL Server Management Studio, but I'm getting the error message: The following system error occurred: The file exists. . (Microsoft SQL Server 2005 Analysis Services) (yes, there really are two dots) Does anyone know how to resolve this so I can restore the backup? Here are the steps I'm using: Open Microsoft SQL Server Management Studio Make the connection to the AS server Right-click on the Databases node on the server tree view Choose Restore... Type in a new database name in Restore database Select the backup file in From backup file Enter the correct password Optionally tick Allow database overwrite (it happens both ways) Press OK -- get the above error message

  Read the article

• Is there an easy way to configure an Ubuntu system to function as a proxy/file server from behind an NAT?

  - by amol.kamath

  Sorry for the long question, but the situation/desire is quite complex. Here is my setup: I have a laptop which I carry around everywhere and I have a desktop sitting at home, connected to the internet through a router using NAT. My objective is to create a connection from my laptop to my desktop that can allow me to (in order of priority): Use the desktop as a proxy server Access files on the desktop remotely Control said desktop from the laptop using VNC or similar. Now here is the scene. I have already looked up and tried several ways to achieve the above goals. Teamviewer - I used it and didn't like it. This is not an option. SSH - This seems ideal, I have figured a way to use this for both proxy and file sharing. However, I am currently unable to connect it due to the NAT. I have a separate thread trying to get that to work here. VPN - I've figured out how to use this method for proxy, but not file sharing. However this faces the same problem as the above: I can't get it to connect through the NAT. Does anyone have any other solutions for what I want? Otherwise, if there are solutions to connecting through the NAT, please tell me (in the other thread). Thanks

  Read the article

• Is there a way to submit a batch of commands to a Cisco router and have them execute from the router?

  - by atroon

  I need to change the configuration of a remote (6 hours' drive) client's Cisco 871 (IOS 12.4.15T) from my location because of some new internet service at his location. To be more precise, I need to change the default route, ip address of the outside interface (Fa4) and disable the PPPoE setup there. Unfortunately, doing any of this will (obviously) break the connection to the router. I do not have an out-of-band management modem set up (I know, I know). Is there any way to enter the commands I need to have run and have them execute one after the other, from a file on flash:? I have never tried anything like that before. Essentially a DOS-style batch file is exactly what I need. Nothing like it seems to be out there except using kron to execute CLI commands, but that is specified here as only taking EXEC commands, not configuration ones. Is there hope, or do I travel?

  Read the article

• kernel openvpn segfault

  - by Rex

  e.. I have some trouble about OPENVPN these days.. At first,I find that the OPENVPN is always down. Then I try to restart it.But after a short while,It's down again. Then I check /var/log/messages and find something below openvpn[4338]: xxx.xxx.xxx.xxx:48484 Re-using SSL/TLS context openvpn[4338]: xxx.xxx.xxx.xxx:48484 LZO compression initialized openvpn[4338]: xxx.xxx.xxx.xxx:48484 [abc.abc_] Peer Connection Initiated with xxx.xxx.xxx.xxx:48484 kernel: openvpn[4338]: segfault at 0000000000000018 rip 00002b75ca30ca2e rsp 00007fff153806a0 error 4 Obviously,OPENVPN is Down. So,I just want to know what's wrong here..... P.s. The username should be abc.abc.But it shows that is abc.abc_ Is there something wrong? CentOS 5.4 x64 Linux 2.6.18-238.9.1.el5 My English is very pool... :( Thanks~

  Read the article

• Not able to login to new AMI on EC2 - moveing from micro to small instance

  - by zengr

  I had a t1.micro instance (old_server) on Linux on EC2 and now I need to upgrade my server to m1.small Linux (new_server). So, here is what I did: Shutdown old_server and create an AMI. Launch the new AMI with m1.small configuration. (I kept the key and security group same as old_server) I tried to login by: ssh -i my_key.pem [email protected] But, it gives a connection timeout error. My login to old_server works fine. So, my question is: What is the correct way to scale up (vertically) an EC2 instance? Where am I going wrong in the above mentioned step? When I create an AMI in step 1, is the EBS (data) also copied.

  Read the article

• Nginx + PHP FASTCGI FAILS - how to debug ?

  - by Niro

  I have a server on AMAZON EC2 running Nginx +PHP with PHP FASTCGI via port 9000. The server runs fine for a few minutes and after a while (several thousands of hits in this case) FastCGI Dies and Nginx returns 502 Error. Nginx log shows 2010/01/12 16:49:24 [error] 1093#0: *9965 connect() failed (111: Connection refused) while connecting to upstream, client: 79.180.27.241, server: localhost, request: "GET /data.php?data=7781 HTTP/1.1", upstream: "fastcgi://127.0.0.1:9000", host: "site1.mysite.com", referrer: "http://www.othersite.com/subc.asp?t=10" How can I debug what is causing FastCGI to die?

  Read the article

• How to choose a web server for a Python application?

  - by Phil

  Information and prerequisites: I have a project which is, at its core, a basic CRUD application. It doesn't have long running background processes which it forks at the beginning and talks to later on, nor does it have long running queries or kept alive connection requirements. It receives a request, makes some queries to the database and then responds. In order to serve static files and cachable files fast, I am going to use Varnish in all cases. Here is my question: After reading about various Python web application servers, I have seen that they all have their "fans" for certain, usually "personal" reasons, which got me confused since each usecase differs from the next. How can I learn about the core differentiating factors of Python web servers (in order) to decide how suitable they are for my project and if one would be better than the other? What are your (technically provable) thoughts on the matter? How should I choose a Python web server? Thank you.

  Read the article

• Vmware Workstation Development Server on Laptop

  - by Koobz

  I'm running an Ubuntu guest OS on my Windows 7 laptop. Currently, I have it set up for bridged networking. The guest is os is configured for a static ip of 192.168.1.115, which depending on the network I'm connected to, may not be available. When I want to view my development work I hit that up in my web browser. I'm really looking for the following scenario: 1) My guest OS ip address stays constant. 2) I can access my guest os even if I don't have an internet connection, or a lan/router. 3) I can share files with my guest/host. How does one accomplish this using VMware Workstation?

  Read the article

• Basic networking: Centos Server Router + Ubuntu Client setup.. unable to access outside world from client

  - by ale

  I am trying to set up my Centos Server with two NICs as a router. eth0 is connected to the outside world and eth1 is connected to an Ubuntu client. Here's eth0 on the server: DEVICE=eth0 BOOTPROTO=dhcp ONBOOT=yes TYPE=Ethernet eth1 on the server: DEVICE=eth1 BOOTPROTO=static IPADDR=192.168.0.10 # a free address on my network ONBOOT=yes TYPE=Ethernet My server has IPv4 packet forwarding turned on and my iptables only contains: # iptables --table nat --append POSTROUTING --out-interface eth0 -j MASQUERADE # iptables --append FORWARD --in-interface eth1 -j ACCEPT My Ubuntu client has this in its /etc/network/interfaces auto lo iface lo inet loopback iface eth0 inet dhcp gateway 192.168.0.10 but I can't get an Internet connection from the server for my client. I can't even ping my server from the client: $ ping 192.168.0.10 Destination Host Unreachable

  Read the article

• SSH not working after Restoring Running-Config to a Replacement Cisco Router

  - by Kyle Brandt

  One of my Cisco routers died over the weekend, Cisco sent the replacement and I restored the the config using copy tftp: running-config. Everything seems to work fine but I can no longer ssh into the router (I can telnet). The connection is refused, so it isn't listening on port 22 it seems like. I had previously backed up the config by just doing ssh router 'show run' > backup_config from my workstation. So: Is there anything wrong with my method of backup vs copy running-config tftp:? I know I haven't given any debug information, but is there something typical I need to do to get ssh working?

  Read the article

• LinkSys WRT54GL + AM200 in half-bridge mode - UK setup guide recommendations?

  - by Peter Mounce

  I am basically looking for a good guide on how to set up my home network with this set of hardware. I need: Dynamic DNS Firewall + port-forwarding VPN Wake-on-LAN from outside firewall VOIP would be nice QoS would be nice (make torrents take lower priority to other services when those other services are happening) DHCP Wireless + WPA2 security Ability to play multiplayer computer games I am not a networking or computing neophyte, but the last time I messed with network gear was a few years ago, so am needing to dust off knowledge I kinda half have. I have read that I should be wanting to set up the AM200 in half-bridge mode, so that the WRT54GL gets the WAN IP - this sounds like a good idea, but I'd still like to be advised. I have read that the dd-wrt firmware will meet my needs (though I gather I'll need the vpn-specific build, which appears to preclude supporting VOIP), but I'm not wedded to using it. I live in the UK and my ISP supplies me with: a block of 8 static IPs, of which 5 are usable to me a PPPoA ADSL2+ connection

  Read the article

• LinkSys WRT54GL + AM200 in half-bridge mode - UK setup guide recommendations?

  - by Peter Mounce

  Crossposted from here I am basically looking for a good guide on how to set up my home network with this set of hardware. I need: Dynamic DNS Firewall + port-forwarding VPN Wake-on-LAN from outside firewall VOIP would be nice QoS would be nice (make torrents take lower priority to other services when those other services are happening) DHCP Wireless + WPA2 security Ability to play multiplayer computer games I am not a networking or computing neophyte, but the last time I messed with network gear was a few years ago, so am needing to dust off knowledge I kinda half have. I have read that I should be wanting to set up the AM200 in half-bridge mode, so that the WRT54GL gets the WAN IP - this sounds like a good idea, but I'd still like to be advised. I have read that the dd-wrt firmware will meet my needs (though I gather I'll need the vpn-specific build, which appears to preclude supporting VOIP), but I'm not wedded to using it. I live in the UK and my ISP supplies me with: a block of 8 static IPs, of which 5 are usable to me a PPPoA ADSL2+ connection

  Read the article

• Chain Gateways on the LAN

  - by Black2night

  I installed m0n0wall in a virtualized environment, i have 10 PCs connected to a router ( 192.168.1.0/24) which connect them to the internet through PPPoE, the problem is that this router does not have a QoS so what i want to do is the following :- let all the PCs get their IP from the Router and the default gateway will be m0n0wall the moon wall will have 2 interface (Lan 192.168.1.20) and (Wan 192.168.1.21 and default gateway 192.168.1.1) now when any PC want to access the internet it should go through m0n0wall and then m0n0wall will forward the connection to the default gateway through the wan interface which is the PPPoE running on the router (192.168.1.1) the big question is this scenario possible or not and what do you suggest? Thanks

  Read the article

• Cannot ssh anymore into FreeBSD 7.2 home server

  - by Gabi

  Somehow sshd stopped running and no amount of start, restart or onestart will make it go again. I normally ssh into it from a dual-boot laptop computer that shows up on the network as gabi-buntu when running Ubuntu Karmic, and as gabi-pc when running Windows XP Pro. Neither my Putty connection nor the Linux terminal can establish a ssh link anymore. Upon rebooting the server, I am greeted with "/etc/rc: WARNING: run_rc_command: cannot run /usr/sbin/sshd". In addition, a message will appear saying things like rpc.statd: failed to contact host gabi-buntu RPC: port mapper failure RPC: timed out Everything else works fine. The FreeBSD 7.2 box runs a print server, a Samba server, and an Apache server for the home wiki, via https. It also serves up NFS shares for Linux clients. Any suggestions? Thank you, Gabi Huiber

  Read the article

< Previous Page | 416 417 418 419 420 421 422 423 424 425 426 427  | Next Page >