Search Results

Search found 13313 results on 533 pages for 'hit count'.

Page 421/533 | < Previous Page | 417 418 419 420 421 422 423 424 425 426 427 428  | Next Page >

  • What determines what resolutions a laptop is willing to output over VGA?

    - by Joshua McKinnon
    I'm responsible for several conference rooms and have setup 1080p projectors and I provide both HDMI and VGA connectivity. HDMI for DisplayPort and Mini-DisplayPort, and VGA as a fallback, universal option. Contrary to what I expected, people seem to have much more trouble with the HDMI than VGA, so VGA gets used a lot more than you'd think (even as most workstation laptops made in the last 3-4 years have DisplayPort or Mini-DisplayPort...). Also to my surprise, VGA outputs over 1080p on a 50ft cable run with very minimal degradation on certain laptops - other laptops just don't offer 1080p as a resolution choice and top out at 1600x1200 or something else. Specific example: a ThinkPad W530 will do 1080p, a W520 won't, over VGA. (both do 1080p over displayport/mini-DP) What determines what resolutions a laptop is willing to output over VGA? I'm thinking this will come down to either a video driver that says it supports only certain resolutions for output, or limitations of the RAMDAC (which wouldn't be in play, at least DAC wise, on a digital output, but WOULD on VGA, an analog output). The basic reason for the question is that I noticed, say, a ThinkPad W520 with 1080p built in display, will output 1080p fine over DisplayPort to a 1080p projector, but will cap out at 1600x1200 (practically the same pixel count, just a little shy) on VGA. Now, this wouldn't be surprising at all except SOME laptops have no issue outputting 1080p over VGA, even with lower native resolutions. Why do I care? Well if there's some way I could enable it... for situations where my users end up using VGA anyway, it's preferable for display mirroring if they can output their laptop's native resolution, which, you guessed it, is very often 1080p on 15" models. DISCLAIMER: This is primarily a curiosity, I'm not claiming 1080p over VGA is ideal by any means, but hey, if it works. I've seen HDMI start artifacting more over same-length, same gauge cabling (up to 50' run in certain rooms). If you think this is better suited to SuperUser, please move it, but this is framed from an IT standpoint of something that affects a real pool of users in a multiple conference room, 50+ deployed laptop scenario.

    Read the article

  • EXCEL generate a character in one column of a row, only if other columns in the same row are not bl

    - by Simon
    My speadsheet keeps track of when patients leave a specific floor of the hospital. There are columns in which where each patient goes is documented (1 column for "home", another column for "rehab facility", another for "other floor", etc.). Only when the patient leaves the hospital altogether does it count as a discharge, in which case the “discharge” column needs to have something in it. What formula can I use to generate, say, an "x" in the "discharge" column if certain "where they went" columns in the same row contain something, but not if there is nothing in any of them? Currently, to accomplish this I am using =IF(OR(M30,N30,O30,P30,Q30,R30,S30),"x") in row 3 of the "discharge" column (rows 1 and 2 are headings), and I have used "fill down" in all subsequent rows. To suppress the "FALSE" this formula yields when the condition is not true, I have applied conditonal formatting to the entire column that if the value=FALSE then the font is white (same colour as background). Is there a more efficient, elegant and idiot-proof way of doing this? The conditional formatting of text colour could potentially confuse everyone but the person who built the spreadsheet (me).

    Read the article

  • Elevating UAC via .bat file?

    - by jslaker
    Pretty straightforward one that I'm having trouble finding an answer to. serverfault previously helped me with finding a way to automate Windows updates without using WSUS. It's working fantastically, but to run it over the network, you have to first mount a shared drive. That's pretty simple XP since you just mount the drive and run the updater. On Vista and W7, though, this all has to be done with elevated privileges to work correctly. The UAC account can't see network drives mounted by the regular user, so in order to get everything working, I have to mount the share via net use from an escalated shell. I'd like to automate mounting this share and launching the updater via a simple .bat file. I could probably just instruct everybody to right click "Run as Administrator" on the .bat file, but I'd like to keep things as simple as possible and have the .bat automatically prompt the user to escalate their privileges. Since these computers don't belong to us, I can't count on anything like Powershell being installed, so that rules any solution along those lines out and pretty much have to rely on things that would be included in an RTM Vista install. I'm hoping I'm mostly missing something obvious here. :)

    Read the article

  • Poor Write Performance in VM inside Proxmox PVE 2.0

    - by sorsenne
    I am running a PVE 2.0 on a decent Hardware (2 SATA HDDs as RAID1, 12GB RAM, i7 CPU) but the I/O Performance is very poor inside the VM (Ubuntu 11.10 Server). The very same VM was copied to another Server running simply Ubuntu Server with KVM and had better I/O Perf. this is how the HDD is shown in the Guest: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) ata1.00: ATA-8: ST3000DM001-9YN166, CC49, max UDMA/133 ata1.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST3000DM001-9YN1 CC49 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) sd 0:0:0:0: [sda] 4096-byte physical blocks sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA I tested with DD: $ dd bs=1M count=128 if=/dev/zero of=test conv=fdatasync 128+0 records in 128+0 records out 134217728 bytes (134 MB) copied, 19.2222 s, 7.0 MB/s on the Host, this same Test will result with 156 MB/s in average. PS: I am using VirtIO and see no error in dmesg.

    Read the article

  • Is it possible to mount a disk image, created with dd, to a directory on a mounted external usb hdd?

    - by Keeper Hood
    I have an image of my home (/dev/sda3) partition, which I've created using the "dd" command. dd if=/dev/sda3 of=/path/to/disk.img I've deleted the home partition via gparted in order to enlarge my /dev/root partition. Then I've recreated the /dev/sda3 partition which is smaller in size then the one I've backed up to the image. I was wondering since I have a 2TB external HDD, could it be possible to mount my backed up image on the external HDD and then copy the files into the /home directory. Since the external HDD would be already in a "mounted state", I'm unsure whether this is a good idea, mounting on a mounted device. I'm running Slackware 13.37 (64bit). used ext4 on all the partitions. resized the root partition with gparted live cd. I've tried mount -t ext4 /path/to/disk.img /mng/image -o loop It gave me an fs error (wrong fs type, bad option, bad superblock on dev/loop/0) Then i did dmesg | tail which outputs: EXT4-fs (loop0) : bad geometry: block count 29009610 exceeds size of defice (1679229 blocks) I have no idea what to do, I want to restore my /home data from the image I've backed up.

    Read the article

  • Tomcat performing terribly for no apparent reason

    - by John
    We're running a game application .WAR on Tomcat 6 on an Amazon EC2 server, 8 core processor, 7gb RAM. The application uses a MySQL database hosted on Amazon RDS. This Facebook application takes ages to access when a mere 20-30 users are playing it. Big difference from 1-2 users. The entire .WAR is ~4mb, all static content hosted elsewhere. The server has never been close to running out of RAM. The CPU utilization has never been higher than 13.5-14%. Even with ~500 users that completely slowed everything to a standstill. The thread count or threadpools isn't close to being maxed out. I heightened maxthreads but it didn't make a noticeable difference. My theory is that Tomcat can only use one processor core, which would explain why it was slowed to a halt even though CPU usage was stably at 13-14% at the activity spike. But I'm struggling to understand why it would only use one CPU core. There is no processor cap in server.xml. The app contains several servlets (4 or 5). There is no mention of SingleThreadModel in the Java code. WHAT could be causing the application to run extremely slowly? If there is only 1-5 people on the application it runs fine. With 20-30 people it's barely contactable.

    Read the article

  • Archive software for big files and fast index

    - by AkiRoss
    I'm currently using tar for archiving some files. Problem is: archives are pretty big, contains many data and tar is very slow when listing and extracting. I often need to extract single files or folders from the archive, but I don't currently have an external index of files. So, is there an alternative for Linux, allowing me to build uncompressed archive files, preserving the file attributes AND having fast access list table? I'm talking about archives of 10 to 100 GB, and it's pretty impractical to wait several minutes to access a single file. Anyway, any trick to solve this problem is welcome (but single archives are non-optional, so no rsync or similar). Thanks in advance! EDIT: I'm not compressing archives, and using tar I think they are too slow. To be precise about "slow", I'd like that: listing archive content should take time linear in files count inside the archive, but with very little constant (e.g. if a list of all the files is included at the head of the archive, it could be very fast). extraction of a target file/directory should (filesystem premitting) take time linear with the target size (e.g. if I'm extracting a 2MB PDF file in a 40GB directory, I'd really like it to take less than few minutes... If not seconds). Of course, this is just my idea and not a requirement. I guess such performances could be achievable if the archive contained an index of all the files with respective offset and such index is well organized (e.g. tree structure).

    Read the article

  • Emails sent to outlook.com not being delivered

    - by imukcedup
    I'm having an issue that is a little strange. I have a cPanel webserver that I own and have root. I was testing out emailing and noticed some issues. When I send an email to outlook.com address the email sends ok but nothing is recieved at the outlook mailbox. I also dont get an 'email delivery failure notification' in any mailbox. 2014-06-12 09:53:47 SMTP connection from [127.0.0.1]:45334 (TCP/IP connection count = 1) 2014-06-12 09:53:47 1Wv5Rr-0003rA-2K <= [email protected] H=localhost (ourdomain.com) [127.0.0.1]:45334 P=esmtpa A=dovecot_login:joe S=667 [email protected] T="This is a test message" for [email protected] 2014-06-12 09:53:47 SMTP connection from localhost (ourdomain.com) [127.0.0.1]:45334 closed by QUIT 2014-06-12 09:53:50 cwd=/var/spool/MailScanner/incoming/1029481 5 args: /usr/sbin/exim -C /etc/exim_outgoing.conf -Mc 1Wv5Rr-0003rA-2K 2014-06-12 09:53:50 1Wv5Rr-0003rA-2K SMTP connection outbound 1402581230 1Wv5Rr-0003rA-2K ourdomain.com [email protected] 2014-06-12 09:53:50 1Wv5Rr-0003rA-2K => Test Account <[email protected]> R=archive_outgoing_email T=archiver_outgoing 2014-06-12 09:53:52 1Wv5Rr-0003rA-2K => [email protected] R=dkim_lookuphost T=dkim_remote_smtp H=mx1.hotmail.com [65.54.188.110] X=UNKNOWN:AES128-SHA256:128 C="250 <[email protected]> Queued mail for delivery" 2014-06-12 09:53:52 1Wv5Rr-0003rA-2K Completed I have checked the outlook.com's spam folders and its not in there either. This is a new IP address allocation from our ISP and there was a block on gmail addresses, so we know it was used for spam. But with gmail we got a notifaction of failure and I know outlook/microsoft also send out notification. Does anyone know what could be happening here? Thanks

    Read the article

  • linux mint VIA sound issue

    - by user2699451
    So I installed linux Mint 15 "Olivia" 64 bit on my Mecer W550EU laptop I have HD Audio with a VIA chipset charles-W55xEU charles # lsmod | grep snd snd_hda_codec_hdmi 36913 1 snd_hda_codec_via 51018 1 snd_hda_intel 39619 5 snd_hda_codec 136453 3 snd_hda_codec_hdmi,snd_hda_codec_via,snd_hda_intel snd_hwdep 13602 1 snd_hda_codec snd_pcm 97451 4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel snd_page_alloc 18710 2 snd_pcm,snd_hda_intel snd_seq_midi 13324 0 snd_seq_midi_event 14899 1 snd_seq_midi snd_rawmidi 30180 1 snd_seq_midi snd_seq 61554 2 snd_seq_midi_event,snd_seq_midi snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi snd_timer 29425 2 snd_pcm,snd_seq snd 68876 19 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_via,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device soundcore 12680 1 snd And my sound card charles-W55xEU charles # aplay -l **** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: VT1802 Analog [VT1802 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 2: VT1802 HP [VT1802 HP] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 and my audio device charles-W55xEU charles # lspci -v | grep -A7 -i "audio" 00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High `Definition Audio Controller (rev 04)` Subsystem: CLEVO/KAPOK Computer Device 0550 Flags: bus master, fast devsel, latency 0, IRQ 47 Memory at f7c10000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel Sometimes when I boot up, soundworks, other times it doenst, it is completely random, so far, no-one on xchat linux help or linux mint forums was able to help me, I have always had issues with sound on VIA chipsets I have: sudo apt-get upgrade && apt-get install mint-meta-cinnamon it seemed to help but after 2-3 reboots, the problem came back, btw, everytime I checked, pulse audio is selected to Duplex Audio Input & Output and alsa mixer is always unmuted!

    Read the article

  • Handle Sysinternals software does not accept -c parameter

    - by Alex
    I am trying to close a handle to a locked file in Windows, using Sysinternals Handle software (http://technet.microsoft.com/en-us/sysinternals/bb896655). First I search for opened handle: handle.exe "C:\Temp" It issues me the following: Far.exe pid: 1144 type: File 2E8: C:\Temp Far.exe pid: 1144 type: File 3A8: C:\Temp Next I run handle.exe with -c parameter. However, whichever number I enter, it does not do anything. I have tried both: 1144, 2E8, 3A8 and 1144 in hex (478) as the software help says it accepts PID in hexademic. Whatever I enter, it just issues the following: Handle v3.46 Copyright (C) 1997-2011 Mark Russinovich Sysinternals - www.sysinternals.com usage: handle [[-a [-l]] [-u] | [-c <handle> [-y]] | [-s]] [-p <process>|<pid>] [name] -a Dump all handle information. -l Just show pagefile-backed section handles. -c Closes the specified handle (interpreted as a hexadecimal number). You must specify the process by its PID. WARNING: Closing handles can cause application or system instability. -y Don't prompt for close handle confirmation. -s Print count of each type of handle open. -u Show the owning user name when searching for handles. -p Dump handles belonging to process (partial name accepted). name Search for handles to objects with <name> (fragment accepted). No arguments will dump all file references. What am I doing wrong?

    Read the article

  • Mac Mini drive problems but SMART verified: bad hard drive or controller?

    - by Zac Thompson
    I have a 3-year-old Intel Mac Mini at home. About a month ago, it stopped booting from the hard drive (internal, SATA, 80GB). I tried booting from the Install Disc to repair the filesystem but Disk Utility was unable to do so ("invalid node structure"). I was also unable to use the hard drive in the Terminal from the Install Disc nor from an Ubuntu boot CD ("DRDY err"). I could see the contents of some directories, but others would give an error and I would get failures when trying to copy files. At this point I was sure the filesystem was hosed and I'd want to reformat at least. DiskWarrior was able to let me retrieve the data files I was interested in, which are now copied to an external hard drive, but it reported a high number of problems ("speed reduced by disk malfunction" count was over 2000) when in the process of trying to rebuild the directory for the drive. It also would not let me use the rebuilt directory to replace the one on the drive; it claimed the disk errors prevented recovery in this way. Under normal circumstances I would now assume that the drive itself was going bad: DiskWarrior's "disk malfunction" error above is supposed to imply hardware problems. My initial plan was to buy a replacement for the internal 2.5" drive. However: Disk Utility, command-line tools and DiskWarrior had reported all along that the SMART status of the drive was okay/Verified. So I'm now worried that the drive hardware is actually fine, and that the problems were due to a disk controller that has gone "bad" somehow. If this is the case, I'll probably just replace the whole computer. Any advice on how I can tell what is to blame? I don't have a lot of extra hardware sitting around, so I don't have the option of simply dropping the drive in another machine or popping another hard drive inside the Mini.

    Read the article

  • Exchange 2010: Find Move Request Log after move request completes

    - by gravyface
    EDIT: significantly changed my question here to streamline it a bit. I've gone ahead and used 100 as my corrupted item count and ran it from the Exchange Shell. So the trail of tears continues with my SBS 2003 to 2011 migration: all the mailboxes have moved mailbox store from OLDSERVER to NEWSERVER, with the Local Move Requests completing successfully, except for one. What I'd like to do now is review the previous move request log files: when they were in progress, I could right-click Properties Log View Log File, but now that they're completed, that's not available. Nor can I use: Get-MoveRequestStatistics <user> -includereport | fl MoveReport ...as the move request has now completed and it errors out with "couldn't find a move request that corresponds...". Basically what I'd like to do is present the list of baditems to the user so that they're aware of what items didn't come across and if anything important was lost, be able to check their current OST, an archive.pst, etc. to recover it if possible. If this all needs to be wrapped up in a batch Exchange power shell command to pipe the output to log files on disk somewhere, I'm all ears, and would appreciate it for the next migration we do.

    Read the article

  • Bad sectors, S.M.A.R.T., SpinRite, firmware on platter and drive id questions.

    - by Christopher Galpin
    Is it possible for S.M.A.R.T. to give false readings (say I was fiddling with lots of recovery programs, transfers, so on and so forth) or is it absolutely a read-only direct correlation to the physical status of a drive? Does SpinRite level 5 "recover bad sectors" operate on those marked at the factory? Are they on the same level as your generic bad sector, with SpinRite thus having full access? (Also I'm curious if SMART's bad sector count is zero'd afterward or if it includes factory marked sectors.) The main firmware of some drives, like a WD Passport is stored on the platter. How is it protected? Is it through marking them as bad sectors? If so, I'm wondering if SpinRite's sector recovery could bring about firmware corruption on these drives. Is the failure of a drive to report valid identity information (hdparm -I /dev/xx) consistent with corrupted firmware, or just general disk failure? I may be misunderstanding the role of firmware here. I feel I've read a drive's identity information is on the platter, just like the partition tables and so on. Is this true? (Apologizes if this is more appropriate for SuperUser.)

    Read the article

  • Home server hard drive: 186k start-stop cycles in 325 days?

    - by j-g-faustus
    I set up a home server about a year ago, using Ubuntu server (10.04 LTS at the moment), four disks in RAID 5 for storage (WD Green 1.5 TB) and a laptop drive for the OS. Today the output of smartctl, a command line utility for checking the SMART attributes of a hard drive, tells me that the primary OS drive has had no less than 186,000 start-stop cycles in 325 days and may be nearing the end of its lifespan. The smartctl output is in "normalized values", in this case a number between 200 and 000, where 200 is "brand new" and 000 means "worn out". My disk gets 001. So I wonder what happened: 186k start/stop cycles in 7820 hours is about one start/stop per 2.5 minutes around the clock. This seems somewhat excessive for a computer that sees actual use once or twice per day. (The RAID disks are normal, averaging to one start/stop per day, as expected.) Does anyone have similar experiences, or pointers to what might be the issue here? Specifically I'd like to know Why the massive start/stop count? Do I have some sort of configuration issue? Could there be a background service that is causing trouble? Could having a laptop disk as the OS drive be part of the problem? Can anyone confirm or deny this? Here is the /etc/hdparm.conf configuration /dev/sda { apm = 127 spindown_time = 120 } and the most relevant parts of smartctl --attributes /dev/sda: smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 001 001 000 Old_age Always - 185875 9 Power_On_Hours 0x0032 090 090 000 Old_age Always - 7820 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 109 193 Load_Cycle_Count 0x0032 118 118 000 Old_age Always - 246833 194 Temperature_Celsius 0x0022 107 098 000 Old_age Always - 36 As I generally prefer my drives to last more than a year, any advice is appreciated.

    Read the article

  • Ubuntu lucid, maverick high iowait

    - by netom
    I'm using Ubuntu, and I've got the same problem with Lucid and Maverick. From time to time, especially a few minutes after boot, the iowait goes between 50-100% and the box is unusable. Everything that tries to access the disk freezes. I have the following setup: Hard disk: Model Family: Western Digital Caviar Green family Device Model: WDC WD15EADS-00P8B0 Serial Number: WD-WMAVU0391287 Firmware Version: 01.00A01 User Capacity: 1.500.301.910.016 bytes I have a quad core Intel Core2 Q6600 processor, and 4G of memory. When the high iowait occurs, usually 4 processes are active: kdmflush (two procs) jbd2/dm-0-8 jbd2/db-1-8 and a few more starving user processes of course. I know this from top and iotop. Any suggestions about why this is happening? There are a lot of q/a-s about linux and high iowait, but none of them helped so far, I even tweaked the hard disk not to park the head in every 8 seconds (Load cycle count is 50334!!!!! :o ), but nothing. Problem persists. Thank you in advance.

    Read the article

  • gpg symmetric encryption using pipes

    - by Thomas
    I'm trying to generate keys to lock my drive (using DM-Crypt with LUKS) by pulling data from /dev/random and then encrypting that using GPG. In the guide I'm using, it suggests using the following command: dd if=/dev/random count=1 | gpg --symmetric -a >./[drive]_key.gpg If you do it without a pipe, and feed it a file, it will pop up an (n?)curses prompt for you to type in a password. However when I pipe in the data, it repeats the following message four times and sits there frozen: pinentry-curses: no LC_CTYPE known assuming UTF-8 It also says can't connect to '/root/.gnupg/S.gpg-agent': File or directory doesn't exist, however I am assuming that this doesn't have anything to do with it, since it shows up even when the input is from a file. So I guess my question boils down to this: is there a way to force gpg to accept the passphrase from the command line, or in some other way get this to work, or will I have to write the data from /dev/random to a temporary file, and then encrypt that file? (Which as far as I know should be alright due to the fact that I'm doing this on the LiveCD and haven't yet created the swap, so there should be no way for it to be written to disk.)

    Read the article

  • Iptables Forwarding problem

    - by ankit
    Hi all, I had initally asked question about sertting up my linux box for natting for my home network and was given suggestions in the thread here. Did not want to clutter the old question so starting a new one here. based on the earlier suggestions, i have come up with the following rules ... :PREROUTING ACCEPT [1:48] :OUTPUT ACCEPT [12:860] :POSTROUTING ACCEPT [3:228] -A POSTROUTING -o eth0 -j MASQUERADE COMMIT *filter :INPUT DROP [3:228] :FORWARD DROP [0:0] :OUTPUT DROP [0:0] -A INPUT -i lo -j ACCEPT -A INPUT -i eth0 -p icmp -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 80 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 443 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 22 -j ACCEPT -A FORWARD -i eth1 -p icmp -j ACCEPT -A FORWARD -i eth1 -p tcp -m tcp --dport 80 -j ACCEPT -A FORWARD -i eth1 -p tcp -m tcp --dport 443 -j ACCEPT -A OUTPUT -p icmp -j ACCEPT -A OUTPUT -j ACCEPT COMMIT If you notice, i do have the proper MASQURADING rule and the proper FORWARD filter rule as well. However i am facing 2 problems On the linux box itself DNS resolving is not working the lan clients connected to the linux box, are still not able to get to internet. when i ping something from them, i see the DROP count in iptables INPUT rule increasing. now my question is, when i am pinging something from the lan client, how come it is being matched by the input chain ?! should it be in the forward chain ? Chain INPUT (policy DROP 20 packets, 2314 bytes) pkts bytes target prot opt in out source destination 99 9891 ACCEPT all -- lo any anywhere anywhere 0 0 ACCEPT icmp -- eth0 any anywhere anywhere 0 0 ACCEPT tcp -- eth0 any anywhere anywhere tcp dpt:http 0 0 ACCEPT tcp -- eth0 any anywhere anywhere tcp dpt:https 122 9092 ACCEPT tcp -- eth0 any anywhere anywhere tcp dpt:ssh Thanks ankit

    Read the article

  • Google Chrome sync: limit for bookmarks & extensions?

    - by Lyubomyr Shaydariv
    Actually, Chrome is my favorite web-browser, and one of its most powerful features is synchronizing the actual data into a Google account. For the last years I gained a lot of bookmarks and from time to time browse the extensions gallery to find new valuable ones. Really, synchronizing between my work and home PC's freed me from manual sync. And for the recent months I experience strange glitches. I guess it may be caused by a lot of stored bookmarks (potentially about 3K [in estimate], but please don't ask why :)) and extensions (about 130 installed but only 10-15 daily used). I can mention the following strange things: Recently added bookmarks sometimes are not synchronized (e.g. I put a bookmark at work, but it's not guaranteed I can see it that evening), despite about:sync indicates a good sync process. Sometimes recently modified bookmarks appear in either (let's call) last at home or last at work bookmark folders. Sometimes bookmarks are not synced at all. (Moreover, Chromium versions may even crash) Extensions are not synced now at all. Perhaps, there's another reason, but Google Mail Checker and Google Reader Notifier do not show indicators of incoming e-mails and news. ... I'm not sure but it looks like I might exceed Chrome internal sync limits... Is it right? Are there any workarounds, or should I make a massive bookmarks/extensions cleanup (I really don't want it :()? I mostly use Google Chrome Canary builds, and the my current one is 12.0.732.0. Thanks in advance. Update #1 (2001-04-19): I removed about 50 extensions that I'm not interested in (or that I consider as trash), and gained pretty some results: The extensions count is below 100 (exactly 97); The chrome://extensions page does not get slow (or even frozen) any more on enabling/disabling/uninstalling extensions; The extensions are seem to be synchronized now again.

    Read the article

  • TCP: Address already in use exception - possible causes for client port? NO PORT EXHAUSTION

    - by TomTom
    Hello, stupid problem. I get those from a client connecting to a server. Sadly, the setup is complicated making debugging complex - and we run out of options. The environment: *Client/Server system, both running on the same machine. The client is actually a service doing some database manipulation at specific times. * The cnonection comes from C# going through OleDb to an EasySoft JDBC driver to a custom written JDBC server that then hosts logic in C++. Yeah, compelx - but the third party supplier decided to expose the extension mechanisms for their server through a JDBC interface. Not a lot can be done here ;) The Symptom: At (ir)regular intervals we get a "Address already in use: connect" told from the JDBC driver. They seem to come from one particular service we run. Now, I did read all the stuff about port exhaustion. This is why we have a little tool running now that counts ports and their states every minute. Last time this happened, we had an astonishing 370 ports in use, with the count rising to about 900 AFTER the error. We aleady patched the registry (it is a windows machine) to allow more than the 5000 client ports standard, but even then, we are far far from that limit to start with. Which is why I am asking here. Ayneone an ide what ELSE could cause this? It is a Windows 2003 Server machine, 64 bit. The only other thing I can see that may cause it (but this functionality is supposedly disabled) is Symantec Endpoint Protection that is installed on the server - and being capable of actinc as a firewall, it could possibly intercept network traffic. I dont want to open a can of worms by pointing to Symantec prematurely (if pointing to Symantec can ever be seen as such). So, anyone an idea what else may be the cause? Thanks

    Read the article

  • Four disks - RAID 10 or two mirrored pairs?

    - by ewwhite
    I have this discussion with developers quite often. The context is an application running in Linux that has a medium amount of disk I/O. The servers are HP ProLiant DL3x0 G6 with four disks of equal size @ 15k rpm, backed with a P410 controller and 512MB of battery or flash-based cache. There are two schools of thought here, and I wanted some feedback... 1). I'm of the mind that it makes sense to create an array containing all four disks set up in a RAID 10 (1+0) and partition as necessary. This gives the greatest headroom for growth, has the benefit of leveraging the higher spindle count and better fault-tolerance without degradation. 2). The developers think that it's better to have multiple RAID 1 pairs. One for the OS and one for the application data, citing that the spindle separation would reduce resource contention. However, this limits throughput by halving the number of drives and in this case, the OS doesn't really do much other than regular system logging. Additionally, the fact that we have the battery RAID cache and substantial RAM seems to negate the impact of disk latency... What are your thoughts?

    Read the article

  • Break all hardlinks within a folder

    - by Georges Dupéron
    I have a folder which contains a certain number of files which have hard links (in the same folder or somewhere else), and I want to de-hardlink these files, so they become independant, and changes to their contents won't affect any other file (their link count becomes 1). Below, I give a solution which basically copies each hard link to another location, then move it back in place. However this method seems rather crude and error-prone, so I'd like to know if there is some command which will de-hardlink a file for me. Crude answer : Find files which have hard links (Edit: To also find sockets, etc. that have hardlinks, use find -not -type d -links +1) : find -type f -links +1 A crude method to de-hardlink a file (copy it to another location, and move it back) : Edit: As Celada said, it's best to do a cp -p below, to avoid loosing timestamps and permissions. Edit: Create a temporary directory and copy to a file under it, instead of overwriting a temp file, it minimizes the risk to overwrite some data, though the mv command is still risky (thanks @Tobu). # This is unhardlink.sh set -e for i in "$@"; do temp="$(mktemp -d ./hardlnk-XXXXXXXX)" [ -e "$temp" ] && cp -ip "$i" "$temp/tempcopy" && mv "$temp/tempcopy" "$i" && rmdir "$temp" done So, to un-hardlink all hard links (Edit: changed -type f to -not -type d, see above) : find -not -type d -links +1 -print0 | xargs -0 unhardlink.sh

    Read the article

  • How do I calculate clock speed in multi-core processors?

    - by NReilingh
    Is it correct to say, for example, that a processor with four cores each running at 3GHz is in fact a processor running at 12GHz? I once got into a "Mac vs. PC" argument (which by the way is NOT the focus of this topic... that was back in middle school) with an acquaintance who insisted that Macs were only being advertised as 1Ghz machines because they were dual-processor G4s each running at 500MHz. At the time I knew this to be hogwash for reasons I think are apparent to most people, but I just saw a comment on this website to the effect of "6 cores x 0.2GHz = 1.2Ghz" and that got me thinking again about whether there's a real answer to this. So, this is a more-or-less philosophical/deep technical question about the semantics of clock speed calculation. I see two possibilities: Each core is in fact doing x calculations per second, thus the total number of calculations is x(cores). Clock speed is rather a count of the number of cycles the processor goes through in the space of a second, so as long as all cores are running at the same speed, the speed of each clock cycle stays the same no matter how many cores exist. In other words, Hz = (core1Hz+core2Hz+...)/cores.

    Read the article

  • Java VM problem in OpenVZ

    - by Ginnun
    Hi, I bought a vps for hosting my java needs. But I can't run java on it. Everything about java is correctly installed but when I try to run java ("java -version" forexample) I get this error : Error occurred during initialization of VM Could not reserve enough space for object heap Could not create the Java virtual machine. I don't think this is a java centered problem, Out of memory for sure. I contacted the vps admin, but he says everything is fine, you have 2gb ram, expandable to 4gb! I did a bit search on the subject, here is my BEANS file (numbers converted to humanredable form using a script). By the way do JVM heap memory allocs count on kmemsize or privvmpages ? How much ram does that configuration allows me to allocate with jvm for a single process? resource held maxheld barrier limit failcnt kmemsize 2.25 mb 2.35 mb 13.71 mb 14.10 mb 0 lockedpages 0 0 1024.00 kb 1024.00 kb 0 privvmpages 20.54 mb 21.33 mb 256.00 mb 272.00 mb 156 shmpages 5.00 mb 5.00 mb 84.00 mb 84.00 mb 0 numproc 13 14 240 240 0 physpages 9.36 mb 9.45 mb 0 MAX_ULONG 0 vmguarpages 0 0 132.00 mb MAX_ULONG 0 oomguarpages 9.36 mb 9.45 mb MAX_ULONG MAX_ULONG 0 numtcpsock 3 3 360 360 0 numflock 3 3 188 206 0 numpty 2 2 16 16 0 numsiginfo 0 1 256 256 0 tcpsndbuf 69.17 kb 69.17 kb 1.64 mb 2.58 mb 0 tcprcvbuf 48.00 kb 48.00 kb 1.64 mb 2.58 mb 0 othersockbuf 6.80 kb 6.80 kb 1.07 mb 2.00 mb 0 dgramrcvbuf 0.00 kb 0.00 kb 256.00 kb 256.00 kb 0 numothersock 9 10 360 360 0 dcachesize 0.00 kb 0.00 kb 3.25 mb 3.46 mb 0 numfile 704 746 9312 9312 0 numiptent 10 10 128 128 0 Thanks in advance!

    Read the article

  • Fixed and dynamic IPs in ISC DHPD lead to double lease

    - by GorillaPatch
    I would like to have a small dynamic adress part and the most clients are assigned a fixed IP adress. My dhcpd.conf looks like this: use-host-decl-names on; authoritative; allow client-updates; ddns-updates on; # Einstellungen fuer DHCP leases default-lease-time 3600; max-lease-time 86400; lease-file-name "/var/lib/dhcpd/dhcpd.leases"; subnet 192.168.11.0 netmask 255.255.255.0 { ddns-updates on; pool { # IP range which will be assigned statically range 192.168.11.1 192.168.11.240; deny all clients; } pool { # small dynamic range range 192.168.11.241 192.168.11.254; # used for temporary devices } } group { host pc1 { hardware ethernet xx:xx:xx:xx:xx:xx; fixed-address 192.168.11.11; } } The motivation for the pool declaration with deny all hosts comes from the ISC DHCPD homepage http://www.isc.org/files/auth.html This will allow hosts to be first added to the network, where they will receive a temporary IP from the 241-254 adress range and then later write an explicit host declaration. Upon next connect it will receive the right configuration. The problem is that I am getting error messages that 192.168.11.13 has a dynamic and a static lease. I am a bit confused as I expected the pool declaration with deny all clients would not count as dynamic. Dynamic and static leases present for 192.168.11.13. Remove host declaration pc1 or remove 192.168.11.13 from the dynamic address pool for 192.168.11.0/24 Is there a way to have the DHCP server send an DHCPNA to clients if they have a host statement and retain this dynamic range?

    Read the article

  • Windows7 shows a drive as full in summary but files, including backup folder, shown on drive are ver

    - by Rob
    I have a drive partitioned so it is seen by Windows as 2 drives: C:\ and D:\ Windows7 shows D:\ as full up in the graphical summary in 'My Computer' summary of all the drives, e.g. the bar graph indicates full and nearly all of the drive's capacity, 108Gb, is full. So I go into the D:\ drive to look at the files, I see several folders. I select them all and the right click menu Properties to count their size, expecting the value to be about the same as what Windows reports in the summary, i.e. nearly 108Gb. But the properties shows the files are very small, Kbs and Mbs, nowhere near 108Gbs. One of the folders is a backup, but its size is very small. I've checked the folder options to show all system files and hidden files too - and counted these in the properties. Something invisible is holding the space. What is happening here? I'm afraid to delete anything if it removes valuable backups. Have I got huge backups here? Why can't I see them? How do I see them?

    Read the article

< Previous Page | 417 418 419 420 421 422 423 424 425 426 427 428  | Next Page >