Search Results

Search found 15247 results on 610 pages for 'state machines'.

Page 422/610 | < Previous Page | 418 419 420 421 422 423 424 425 426 427 428 429  | Next Page >

• SNMP Access on Ubuntu

  - by javano

  I am trying to use SNMP to monitor a machine locally on its self and remotely. This is the snmpd.conf (Ubuntu 8.04.1): # sec.name source comunity com2sec readonly 1.2.3.4 nicenandtight com2sec readonly 5.6.7.8 reallysafe group MyROGroup v1 readonly group MyROGroup v2c readonly group MyROGroup usm readonly view all included .1 view system included .iso.org.dod.internet.mgmt.mib-2.system access MyROGroup "" any noauth exact all none none syslocation my house syscontact me <[email protected]> exec .1.3.6.1.4.1.2021.7890.1 distro /usr/bin/distro smuxpeer .1.3.6.1.4.1.674.10892.1 includeAllDisks 95% 1.2.3.4 is the local machines IP and everything is working locally. 5.6.7.8 is the remote machine and initially I am just trying to touch SNMPD with snmpwalk from the remote machine; snmpwalk -v 2c -c reallysafe 1.2.3.4 Timeout: No Response from 1.2.3.4 I have added to iptables as the very first rule; -A INPUT -p udp -m udp --dport 161 -j ACCEPT With such a loose iptables rule I can't see why I can't even touch the SNMPD on that Uubuntu Machine. There are more specific rules further down the table but as I couldn't connect I added the above. TCPDump shows the UDP packets coming in. What could be going wrong here?

  Read the article

• Running Visual Studio 2010 in a University Campus

  - by Woondows

  We have just installed Windows 7 Enterprise x64 in one of our computer labs being used by students for programming. However, when we installed Visual Studio 2010 Ultimate on the machines, we found that to even launch the application (devenv.exe), required the student to enter the administrator password (the usual UAC prompt). Of course, we could just turn off UAC, but that would defeat the purpose of having it in Windows 7. On the other hand, we cannot really give the students local administrator privilege, as we are concerned that they will do some malicious stuff on the computers. Previously when we used Windows XP Professional running Visual Studio 2005, we had no problems. Kindly advise if there's any workaround for this. EDIT: Thanks for the answer guys. Mayank, your links may work for Visual Studio .Net, but it doesn't seem to work for Visual Studio 2010. Ryan, Tieson, I'm intrigued that you guys managed to get it working easily. FYI I don't manage the Group Policies, but I can get them changed if necessary. Any particular GP that I should be looking at? Suggestions to how to troubleshoot further why UAC is being invoked? At least now I know for sure that this is not supposed to be the default behaviour for Visual Studio 2010 so I'm going to keep digging for a solution. Will try running Procmon and see if i can find something..

  Read the article

• About to go live: virtual dedicated server or cloud?

  - by morpheous

  I am about to launch my startup company, and we will be going live in a few weeks time. We have really tight budgetary constraints, since we are bootstrapping - and would prefer not to raise external capital. I cant use shared hosting because I need more control of the server machine (for technical reasons - e.g. using proprietary extensions to PHP, Apache and in the database layer as well) - but want to control costs and dont want to go fully private server route, until we have determined the market size etc. So the only real alternatives AFAIK is between virtual server and the cloud. At the moment, cloud services seem a bit "vague" to me. My understanding is that they allow an entity to outsource its IT infrastructure, which in my mind (at least), is indistinguishable from what a hosting provider provides (at least from a functional point of view) - I would like to seek some clarification on exactly what the difference between the two is. Back to my original question, my requirements are: IT infrastructure that can scale with growth Ability to have control of the machine (for e.g. to install our internally developed libraries etc) Backup software that is flexible and comprehensive enough (yet simple to use), that allows a (secured) backup strategy to be implemented. On this issue, I have always wondered where the actual backed up data was stored (since the physical machines are remote, and one cant get access to any actual tapes etc backed onto). I would also like some advice and recommendations in this area. Regarding data size, I am expecting the dataset to be increasing by a few megabytes of data (originally, say 10Mb, in about a years time, possibly 50Mb) every day. As an aside, I have decided to deploy on a Debian server (most of my additional libraries etc were compiled and built on a Debian machine). Mindful of all of the above, I would like some advice (and reason) as to which route to take. I would also like some advice on which backup software to use, from people who have walked a similar path.

  Read the article

• Can't authorize a server for Amazon RDS

  - by Parris

  We are attempting to slowly migrate a website over to AWS among other things. We decided the first thing to move was the database. We have some dedicated server with a different hosting provider. We only have one IP. I am having trouble authorizing the ip so that the old server can connect to RDS. It simply hangs for a while while using the mysql cli, then responds: ERROR 2003 (HY000): Can't connect to MySQL server on 'db.address.us-east-1.rds.amazonaws.com' (110) It did work on my laptop though. I am not quite sure what is wrong. I have a feeling I don't quite understand CIDR/IP. I simply took the ip address and tacked on /32 at the end. Then I gleaned some information that it also has to do with subnet mask? ifconfig reports: 255.255.255.0 I found a calculator and the IP changed a bit and had /24 at the end. That still didn't work. One other note... perhaps i dont know enough about the differences between OS. The hosting provider is using centOS, while our development machines are all ubuntu. Any insight would be extremely helpful! THANKS :)

  Read the article

• Data Store/Volume disconnecting. How to resume copy of VMDK?

  - by Serge

  I'm having an issue with my ESXi 4.1 hosts losing the datastore with FC SAN after a power outage. All 3 hosts disconnect so it's definitely a SAN issue. I've tried to resolve the issue on the SAN side with the SAN software support and Adaptec hardware support. No luck there. So I'm stuck with a SAN that will randomly disconnect the volume. I need to get the virtual machines (VMDK files) from the datastore. The problem is I can only get 5-20% before the data store disconnects. I have backups that are slightly older that I can use to replicate the VMDK differences to. What has not worked so far: Powering up the VMs, will boot up for 5-15 minutes then freeze vCenter migrate or clone of VM, will fail after similar period of time vCenter copy/paste of VMDK. Was able to get one 30GB VMDK and no luck after that. vMware Data Recovery. Fails at low %, can't resume, so next backup starts from begining. Veeam Backup & Recovery. Same as above, no resume function. If I can just find a backup solution that will resume from the failed spot that would solve my issue. Anyone have any ideas that I could try? EDIT 1 The SAN is Open-E DSS 6 running on a Supermicro 24 drive enclosure with 4 port Qlogic FC. Adaptec 52445 RAID card.

  Read the article

• Issues regarding internet connectivity

  - by andySF

  Hello. My problem started when Yahoo Messenger stopped connecting. I've tried to see if Internet Explorer was working but will not load any page. The diagnostics of Internet Explorer says that is something wrong with my dns(using just ip of google or yahoo or my local webserver was not working). I use Windows 7 and at the moment i've had Internet Explorer 8 and after a lot of failing updates to ie9 I've successfully install the Romanian version of IE9(now i have ie8 after a system restore). Then I installed the service pack 1. I've done a lot of things and I will try to enumerate them, but my problem persists. Settings from Yahoo Messenger and Internet Explorer are OK. I've try to reset winsock and ip from netsh. I've scanned my pc with spybot, mallwarebytes, Trojan Remover(simplysup), Loaris Trojan Remover, Avast, Nod32, Kaspersky, Bitdefender,alot of registry cleaner including CCleaner and maybe others that I cannot remember now. I reset the registry permissions using subinacl. At a moment my files permissions was set jut to "trusted installer" and I've put the permission back to files and folders using the model of other windows 7 machine. I have try so many things that now i'm stuck in a loop using different security tools to check for problems. Oh, and my virtual machines are working just fine.(I'm using VirtualBox) Please Help. PS, Reinstalling Windows is not an option. Thank you!

  Read the article

• Cannot access shares via full domain name on Server 2008R2

  - by Stu

  Hi, I have a strange issue. We have a 2008R2 PDC and BDC. I can join the domain fine and everything seems "normal". However, on some of the other 2008R2 servers, I am unable to do things like a gpupdate. When I try, I get an error that the clocks are wrong (they aren't) and that I don't have permission. So far, this has only affected our 2008R2 servers -- the Win 7 clients are fine. The really strange things is if I browse to: \\mydomain.lan\sysvol - I get the error. But! if I browse to: \\MYDOMAIN\sysvol - it works fine. I can also access the \hostname.domain\sysvol remotely for each of the DC's and it's fine. So in short, it appears the permissions are fine since I can access them all individually on the same account. It also seems unlikely it's on the server as most clients can access it fine. The only drama I have is when I try to use the full domain name (which of course gpupdate does) on a 2008R2 server. Also, it's not just sysvol...netlogon has the same issues too on the affected machines. Any ideas? Thanks! Drew

  Read the article

• VMware ESXi 4.1 snapshot of server 2008R2 machine generates 2 indentical snapshots

  - by Peter

  I have 2 VMs that are failing to get veeam backups, and it appears that the culprit is vmware snapshots. We are running Vsphere ESXi 4.1 build 320092, we have multiple server 2008R2 machines that take snapshots fine, but when with these two VMs when I take a snapshot I get 2 identical snapshots a few seconds apart. The snapshot manager only shows 1 snapshot, but there are 2 files 1 number off, that are identical sizes. There is only one disk on each VM, so that isn't the problem. Has anyone seen this behavior before and know how to fix it? Here are the files after a bad snapshot VM-XXX-000001-ctk.vmdk VM-XXX-000001-delta.vmdk VM-XXX-000001.vmdk VM-XXX-000002-ctk.vmdk VM-XXX-000002-delta.vmdk VM-XXX-000002.vmdk VM-XXX-2a659dbf.hlog VM-XXX-2a659dbf.vswp VM-XXX-Snapshot286.vmsn VM-XXX-aux.xml VM-XXX-ctk.vmdk VM-XXX-flat.vmdk VM-XXX-vss_manifests286.zip VM-XXX.nvram VM-XXX.vmdk VM-XXX.vmsd VM-XXX.vmx VM-XXX.vmxf vmware-20.log vmware-21.log vmware-22.log vmware-23.log vmware-24.log vmware-25.log vmware.log VM-XXX-000001.vmdk and VM-XXX-000002.vmdk are the exact same size.

  Read the article

• Remote connection to a Windows 2008 Server Web edition

  - by Lorenzo

  Hello I have just installed Windows 2008 web server to have a development/test site on my office. In the test network I only have 2 machines: Windows server 2008 Web Edition Vista x64 client machine with Visual Studio The client and the server are networked using a NETGEAR router. I have enabled Remote desktop on the server and when I try to connect to it within the Vista client I get the credential window as in the following screenshot. But even if I write the correct credentials I am not able to remote login on the server. Where am I doing wrong? Update 1 I have even tried to create a folder share on the server. But I am not able to access it for the same reason. User or password invalid it says. But this is impossible as I am logging in the server with the same credentials. Update 2 If I try to browse the network from the RDP client I receive a message saying that there are no server running Terminal Services in my network.... :O

  Read the article

• big cpu load on vmware server / linux

  - by dezfafara

  Hi, I currently using a server 2.x hosting 4 virtual machines on a linux system Today, on my physical server, I saw an enormous load average: this is the "top" of the server, illustrating my 4 virtual guests. top - 11:02:02 up 194 days, 23:09, 5 users, load average: 18.78, 12.05, 13.55 Tasks: 113 total, 4 running, 109 sleeping, 0 stopped, 0 zombie Cpu0 : 71.6%us, 19.0%sy, 0.0%ni, 8.8%id, 0.0%wa, 0.3%hi, 0.3%si, 0.0%st Cpu1 : 74.3%us, 10.4%sy, 0.0%ni, 15.3%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu2 : 72.5%us, 17.6%sy, 0.0%ni, 9.8%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu3 : 79.5%us, 4.6%sy, 0.0%ni, 16.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 8178884k total, 8129980k used, 48904k free, 134904k buffers Swap: 10490436k total, 148k used, 10490288k free, 6129728k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 7312 root 6 -10 1149m 921m 559m R 97 11.5 107947:09 vmware-vmx 6995 root 6 -10 779m 687m 317m R 92 8.6 107374:31 vmware-vmx 6693 root 6 -10 880m 659m 409m S 85 8.3 76947:33 vmware-vmx 12937 root 6 -10 960m 719m 523m S 75 9.0 67219:49 vmware-vmx In bold are the cpu usage for my 4 virtuals guests These guests are running on a linux system, and the appropriate process are usually 5% - 15% of cpu I don't understang why , since a few days I have this big problem. This is the "top" on a virtual guest which is at 95% of cpu load top - 11:23:15 up 194 days, 23:13, 4 users, load average: 0.25, 0.47, 0.59 Tasks: 92 total, 2 running, 90 sleeping, 0 stopped, 0 zombie Cpu(s): 1.4%us, 7.7%sy, 0.0%ni, 90.5%id, 0.5%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 382296k total, 369732k used, 12564k free, 145156k buffers Swap: 979924k total, 13956k used, 965968k free, 86988k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 3691 root 20 0 23948 1148 960 S 13.0 0.3 15339:23 vmware-guestd 3840 root 20 0 19880 584 512 S 7.7 0.2 1729:17 hald-addon-stor This virtual guest state is ok ... If anyone has any ideas .. Thanks

  Read the article

• What are problems and pitfalls with a public facing Active Directory

  - by Ralph Shillington

  The situation that i'm faced with is this: We plan on using a number of server applications hosted on Amazon EC2 machines, mainly Microsoft Team Foundation Server. These services rely heavily on Active Directory. Since our servers are in the Amazon cloud it should go without saying (but I will) that all our users are remote. It seems that we can't setup VPN on our EC2 instance -- so the users will have to join the domain, directly over the internet then they'll be able to authenticate and once authenticated, use that token for accessing resources such as TFS. on the DC instance, I can shut down all ports, except those needed for joining/authenicating to the domain. I can also filter the IP on that machine to just those address that we are expecting our users to be at (it's a small group) On the web based application servers, I imagine all we need to open is port 80 (or 8080 in the case of TFS) One of the problems that I'm faced with is what domain name to use for this Active directory. Should I go with "ourDomainName.com" or "OurDomainName.local" If I choose the latter, does that not mean that I'll have to get all our users to change their DNS address to point to our server, so it can resolve the domain name (I guess I could also distribute a host file) Perhaps there is another alternative that I'm completely missing.

  Read the article

• Howto disable SSH local port forwarding ?

  - by SCO

  I have a server running Ubuntu and the OpenSSH daemon. Let's call it S1. I use this server from client machines (let's call one of them C1) to do an SSH reverse tunnel by using remote port forwarding, eg : ssh -R 1234:localhost:23 login@S1 On S1, I use the default sshd_config file. From what I can see, anyone having the right credentials {login,pwd} on S1 can log into S1 and either do remote port forwarding and local port forwarding. Such credentials could be a certificate in the future, so in my understanding anyone grabbing the certificate can log into S1 from anywhere else (not necessarily C1) and hence create local port forwardings. To me, allowing local port forwarding is too dangerous, since it allows to create some kind of public proxy. I'm looking for a way tto disable only -L forwardings. I tried the following, but this disables both local and remote forwarding : AllowTcpForwarding No I also tried the following, this will only allow -L to SX:1. It's better than nothing, but still not what I need, which is a "none" option. PermitOpen SX:1 So I'm wondering if there is a way, so that I can forbid all local port forwards to write something like : PermitOpen none:none Is the following a nice idea ? PermitOpen localhost:1

  Read the article

• UDP blocked by Windows XP Firewall when sending to local machine

  - by user36367

  I work for a software development company but the issue doesn't seem to be programming-related. Here is my setup: Windows XP Professional with Service Pack 3, all updated Program that sends UDP datagrams Program that receives UDP datagrams Windows Firewall set to allow inbound UDP datagrams on a specific port (Scope: Subnet) If I send a UDP datagram on any port to other, similar machines, it goes through. If I send the UDP datagram to the same computer running the program that sends (whether using broadcast, localhost IP or the specific IP of the machine), the receiver program gets nothing. I've traced the problem down to the Windows XP Firewall, as Windows 7 does not have this problem (and I do not wish to sully my hands with Vista). If the exception I create for that UDP port in the WinXP firewall is set for a Scope of Subnet the datagram is blocked, but if I set it to All Computers or specifically enter my network settings (192.168.2.161 or 192.168.2.0/255.255.255.0) it works fine. Using different UDP ports makes no difference. I've tried different programs to reproduce this problem (ServerTalk to send and either IP Port Spy or PortPeeker to receive) to make sure it's not our code that's the issue, and those programs' datagrams were blocked as well. Also, that computer only has one network interface, so there are no additional network weirdness. I receive my IP from a DHCP server, so this is a straightforward setup. Given that it doesn't happen in Windows 7 I must assume it's a defect in the Windows XP Firewall, but I'd think someone else would have encountered this problem before. Has anyone encountered anything like this? Any ideas?

  Read the article

• VirtualBox VM running web server not accessible via external IP

  - by mwigdahl

  I have a Windows 7 machine running VirtualBox with an Ubuntu guest. The guest has a Bitnami LAMP stack installed. I have the guest configured for Bridged networking, and I can access the guest web server just fine from other machines on my LAN using the guest's IP. I'm trying to configure port forwarding so that I can access the web server from outside my LAN. (The router is a 2WIRE model as I'm on ATT's UVerse). I've set up port forwarding for ports 80 and 443 to the guest's IP in a similar manner to how I had them set up for my previous, physical web server, which worked just fine. However, I cannot seem to access the new, virtual web server using my external IP on the forwarded port. I suspected Windows Firewall issues on the host, but disabling it didn't solve the issue. Anyone have advice on what I should try next? EDIT: I've now attempted disabling the firewall on the guest with sudo ufw disable -- that doesn't seem to help either. However, after checking the router's port forwarding in more detail I may see the problem. My VM is named "linux" and in the router's configuration pages it shows up inconsistently. Sometimes it reports with a valid LAN IP and other times it doesn't show up with any IP. Even when it shows the correct IP the router indicates that it is disconnected. Could this be an indication that the 2WIRE router doesn't play well with VirtualBox's bridged networking mode?

  Read the article

• Hyper-V: Dedicated NIC for Guests VMs

  - by TheLizardKing

  I have two NIC cards and created a private virtual network for my virtual machines and unchecked "Allow management operating system to share this network adapter" which basically turns my Guest NIC into this sorta shell of a NIC card on the host machine and the only thing checked in it's properties is "Microsoft Virtual Network Switch Protocol" which I am fine with. Everything works and everything is connected. My issue is that for some reason my guest (Ubuntu Server with legacy network drivers) is not talking properly to my DHCP server. Specifically my DHCP server reserves the guest's IP address using it's MAC address but the guest isn't picking it up. It's picking up any old IP it can get and I can't even ping the hostname from another PC on the network but it pings fine if I use the IP. I see the guest showing up in my DHCP table but I can't get the reservation to stick. Is there some reason it's only partially communicating with my DHCP server? Pinging it's hostname on itself reveals it's using 127.0.0.1 instead of it's network IP. Is this an issue with the legacy drivers used in Hyper-V?

  Read the article

• WinHttpCertCfg not importing certificate

  - by Ramon Zarazua

  I need to setup a deployment script that imports an SSL certificate that my service uses. I have tried importing with WinHttpCertCfg and with CertMgr to no avail. Here are the command-line arguments I have tried to use with both: winhttpcertcfg.exe -i <certname>.pfx -c LOCAL_MACHINE\My -p <password> -a <user service runs as> and CertMgr.exe -add -all -s -r localMachine -c <cert name> My It seems from what I have investigated that CertMgr does not allow you to import certificates with a password, so I'd rather get winhttpcertcfg working. When I run them I get the following output: WinHttpCertCfg: Microsoft (R) WinHTTP Certificate Configuration Tool Copyright (C) Microsoft Corporation 2001. CertMgr: CertMgr Succeeded However, when I look into the local machine certificates in MMC, try to load them from my service, or list it out through winhttpcertcfg, or even looking at the registry in HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SystemCertificates\MY\Certificates it is not found. I have tried all of the following: If I install the cert manually (Through CertMgr.msc dialogs) it works. The user installing is running as administrator The user installing has full access on the certificate The tools print out an error when something is wrong (wrong password) Tried it in multiple machines (All of them server 2008 R2) At this point I am officially out of ideas. Thank you.

  Read the article

• DNS request times out then succeeds on my local network. Why?

  - by Dan

  I have a W2K3 Server that is the Domain Controller and also the DNS server. I wanted to make another DNS zone on my network called "something.local" and then make 'A' records to point requests like 'admin.something.local' and 'www.something.local' to machines on my network. I keep getting DNS timeouts but then after 2 tries it succeeds. Why would this happen? How can I troubleshoot? From my desktop I run: nslookup admin.something.local and get: Server: server.domain.com.au.local Address: 192.168.0.10 DNS request timed out. timeout was 2 seconds. DNS request timed out. timeout was 2 seconds. Name: admin.something.local Address: 192.168.0.191 If I go back the other way: nslookup 192.168.0.191 I get: Server: server.domain.com.au.local Address: 192.168.0.10 Name: admin.something.local Address: 192.168.0.191 My DNS server address is 192.168.0.10. The new DNS zone is not hooked up to active directory. I do not have much experience with DNS. Yesterday it was working fine. I have tried doing an 'ipconfig /flushdns' on both my desktop and the DNS server

  Read the article

• My DNS works! But, what is the simplest way to add something to it?

  - by Alex

  This is my current DNS example.com.db zone file. I followed a tutorial. It works, because when I point to this DNS from another server via resolve.conf, it will actually forward me to the right IP when I do "ping example.com". ; ; BIND data file for example.com ; $TTL 604800 @ IN SOA example.com. info.example.com. ( 2007011501 ; Serial 7200 ; Refresh 120 ; Retry 2419200 ; Expire 604800) ; Default TTL ; @ IN NS ns1.example.com. @ IN NS ns2.example.com. example.com. IN MX 10 mail.example.com. example.com. IN A 192.168.254.1 www IN CNAME example.com. mail IN A 192.168.254.1 ftp IN CNAME example.com. example.com. IN TXT "v=spf1 ip4:192.168.254.1 a mx ~all" mail IN TXT "v=spf1 a -all" Right now, ping example.com....goes to 192.168.254.1. That's great!!! it works! My question is--how can I add something do this file so that when my other servers: ping dbserver1....goes to 44.245.66.222 ping cacheserver1 ....goes to 38.221.44.555 I want to use it like a universal hosts file for my machines.

  Read the article

• Google account gives ERR_SSL_BAD_RECORD_MAC_ALERT errors

  - by Kjensen

  A couple of days ago, I started being unable to connect to accounts.google.com, which handles logins to all kinds of google services. I get this error in Chrome: Error 126 (net::ERR_SSL_BAD_RECORD_MAC_ALERT): Unknown error. In IE I get this: I assume it is the same error, just wrapped up. I run Win8 RTM. On the SAME machine, using the same network card, in a VMWare workstation image running Win7, I am able to connect perfectly. On another of my machines on my network, I am also still able to connect with no problem. My girlfriend uses the same network and has also complained a couple of times about this error (google calendar) - but this is anecdotal, since her technical troubleshooting abilities stop at "xxxx is broken". Her machine runs Win7. ;) I have rebooted, cleared cookies, do not run any antivirus/firewall, have not changed network config. The first 3-4 days after installing Win8, I did not have any problems. I have also searched, and found a hint about enabling SSL2.0 in connection settings, which did not help. Anybody know something about this error and what I can do to fix it?

  Read the article

• CUPS printer on Vritual Machine can be access via CUPS admin, but not by XP?

  - by SJaguar13

  I have a Zebra label printer connected to a Linux Mint virtual machine. It was set up with CUPS and a Windows XP computer can then print to it via http://192.168.1.76:632/printers/labelprinter. That was all fine and dandy I then hooked up a Fargo Pro L PVC card printer to a Windows XP virtual machine. I had to disconnect the label printer as the server that hosted both virtual machines only has 1 parallel port. Now I plugged in the Zebra again, and it cannot print from the Windows XP computer anymore. If I go to the CUPS admin panel on the Windows XP computer, I can see it, everything looks fine, and I can send it a test page to print which works. If I try to print from Windows, I get an error that the printer is not found/cannot connect to the server. The only other thing that changed was the firewall on the router to allow remote desktop to another computer from outside the network, but all the firewall stuff was for external use. Nothing affected the IP address of the internal network. The Linux Mint VM also had a PDF pritner that was shared with CUPS. That printer is also down. I tried setting up a new CUPS installation on another VM, and when I go to share it with XP, I get the same error. I don't know what to try. It has access, it can get to the admin from that computer, it seems to be up and ready, but when Windows tries to connect, the printer isn't found even though 4 days ago everything was fine. Any ideas?

  Read the article

• UDP blocked by Windows XP Firewall when sending to local machine

  - by user36367

  Hi there, I work for a software development company but the issue doesn't seem to be programming-related. Here is my setup: - Windows XP Professional with Service Pack 3, all updated - Program that sends UDP datagrams - Program that receives UDP datagrams - Windows Firewall set to allow inbound UDP datagrams on a specific port (Scope: Subnet) If I send a UDP datagram on any port to other, similar machines, it goes through. If I send the UDP datagram to the same computer running the program that sends (whether using broadcast, localhost IP or the specific IP of the machine), the receiver program gets nothing. I've traced the problem down to the Windows XP Firewall, as Windows 7 does not have this problem (and I do not wish to sully my hands with Vista). If the exception I create for that UDP port in the WinXP firewall is set for a Scope of Subnet the datagram is blocked, but if I set it to All Computers or specifically enter my network settings (192.168.2.161 or 192.168.2.0/255.255.255.0) it works fine. Using different UDP ports makes no difference. I've tried different programs to reproduce this problem (ServerTalk to send and either IP Port Spy or PortPeeker to receive) to make sure it's not our code that's the issue, and those programs' datagrams were blocked as well. Also, that computer only has one network interface, so there are no additional network weirdness. I receive my IP from a DHCP server, so this is a straightforward setup. Given that it doesn't happen in Windows 7 I must assume it's a defect in the Windows XP Firewall, but I'd think someone else would have encountered this problem before. Has anyone encountered anything like this? Any ideas? Thanks in advance!

  Read the article

• free up not used space on a qcow2-image-file on kvm/qemu

  - by bmaeser

  we are using kvm/qemu with qcow2-images for our virtual machines. qcow2 has this nice feature where the image file only allocates the actually needed space by the virtual-machine. but how do i shrink back the image file, if the virtual machine's allocated space gets smaller? example: 1.) i create a new image with qcow2 format, size 100GB 2.) i use this image to install ubuntu. installation needs about 10 gb, the image-file grows up to about 10GB. nothing unexpected so far. 3.) i fill up the image with about 40 GB of additional data. the image-file grows up to 50GB. i am ok with that :-) 4.) this is where it gets strange: i delete all of the 40GB data on the image, but the image-size still eats up 50GB. question: how do i free up that 40GB of data and shrink the image to the only needed 10 GB? thanks in advance, berni

  Read the article

• How do you enable view source in ie8 when it gets magically diabled

  - by Tim Meers

  I have multiple computers that all seem to have View Source disabled from the content menu when you right click on a web page. Now I know it's not that the web page is some how disabling it, I'm pretty sure thats not even possible. But alas I have at least 3 machines in my office (not on AD) that have this problem. I have also worked on clients computers that have this same issue. It's down right maddening! I tried to Google for it, but it just shows results from the dawn of IE6 in all of it's "glory" with a bug where if the cache was full it would be disabled. But this is not the case in IE8. Any body have a clue why this is happening, or a fix for it? Maybe a reg setting? Update: So I got a little closer to solving it, but there was still an issue on one computer where it allowed it not is HTTP, but not in HTTPS. One other computer works correctly in both. I Found these two keys missing in the registry: [-HKEY_CURRENT_USER\SOFTWARE\Microsoft\Internet Explorer\View Source Editor] [-HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\View Source Editor]

  Read the article

• Redeploy using Active Directory

  - by Noam Gal

  I am trying to use group policy to deploy our msi through AD. For some strange reason, when I overwrite the msi with a newer version, and then go to the policy, and click on "Redeploy Application", the application gets uninstalled on the users' machines, and all reg keys, binaries and shortcuts are gone from them. The "Add/Remove Programs" still contain the application entry. I have managed to create a minimal vdproj that does nothing but write its current Product Version to a registry key, and created two versions of it (1.0.0 and 1.1.0). I still face the same problems when using this msi in my AD environment. I did check that my Package Codes and Product Codes are different for both versions, and that the Upgrade Codes are identical. I also checked the RemovePreviousVersion to true. Checking with some other msi (firefox 3.0.0 and 3.6.3) I downloaded from a site specifically for AD deploy, it worked just as expected (first installing the 3.0.0, then I over-written the msi, and clicked on "Redeploy", and the users got 3.6.3 after the next log-off-log-on). What am I missing here?

  Read the article

• virtualbox instances dedicated-server with custom dnsmasq

  - by ovanes

  I have dedicated server where I planned to run virtualbox virtual machines. Since the VMs are managed with vagrant/chef I may end up with many different ones. I thought it would be a great idea to deploy a dnsmasq on the server, which is going to dynamically assign the ip addresses to the VMs. Since each Vagrant/Chef recipe is configured to set the VM's host name I can find/reference the appropriate VM by the host name. Finally, the entire infrastructure is not directly accessible via internet, so the dedicated Server is the OpenVPN host. So the entire infrastructure may be seen as: +-------------------------------------+ | Dedicated Server | | | | +-------------+ +------------+ | +------------------+ | | DNSMasq | | OpenVPN |<==========>| Client | | +-------------+ +------------+ | | | | ^ ^ | +------------------+ | | | | | +--+ | | | | +-------+ | | | | VM1 | | | | +-------+ | | | ... | | | +-------+ | | +-| VM2 | | | +-------+ | +-------------------------------------+ Now some questions which I am struggling with: Are there any other suggestions to access private infrastructure, because I don't want to reinvent the wheel. On the Dedicated Server I don't see the vboxnet0 interface but VirtualBox is installed without GUI. Accessing of virtual boxes via ssh works fine. Did I miss smth? DNSMasq must serve the local VMs only, otherwise there is a chance that local DNSMasq start to serve other server's on the network, what I don't want. Because I don't see vboxnet0 I tend to use no-dhcp-interface=eth0 config option. Are there any thoughts on that despite, the fact that a second NW-card (which is not the case), might start serving DHCP-Requests? How should I config the VM's network interface that I am able to access it via OpenVPN and resolve the hostnames using the DNSMasq. I think it should be the host-only network card. Should I do bridging in the OpenVPN config or is it sufficient to use routing.

  Read the article

< Previous Page | 418 419 420 421 422 423 424 425 426 427 428 429  | Next Page >