Search Results

Search found 12987 results on 520 pages for 'tulsa technology center'.

Page 424/520 | < Previous Page | 420 421 422 423 424 425 426 427 428 429 430 431  | Next Page >

• 3 Monitor PCI-e Graphics card on Linux (without tremendous pain)?

  - by N Rahl

  As we are all painfully aware, the only way to get multiple monitors AND compositing (Compiz) on Linux is to use a single graphics card that can drive both (or in my case all three) screens. I bought a Radeon 5750 specifically because it claims to able to drive 3 monitors. I can plug in 3 monitors (2 DVI, 1 HDMI) and the Catalyst Control Center shows all 3, but only 2 can be enabled at a time. The exact message is: The current settings cannot be applied. Possible issues may include: - Display(s) cannot be enabled. - Setting(s) cannot be applied due to insufficient video memory. So I'm going to assume that either the 5750 doesn't support 3 monitors, OR, more likely, ATI couldn't be bothered to add that support to their Linux drivers. So this is a multipart question: First, can anyone suggest a PCI Express Graphics card that can run 3 screens on linux without tremendous pain? I'm looking for something where you install the driver and all three screens "just work". Does such a card exist? Second, if you have a 5750, have you been able to get it to do 3 monitors? I'm running Ubuntu 10.04 at the moment.

  Read the article

• PHP application failed to connect after a network plugged back in

  - by tntu

  My data-center appears to have had some issues with their network and thus my server has suffered from on an off network connectivity for about an hour. After the connection has been completely re-established my code still kept reporting the same issue over and over until I have restarted the service. The code is a simple PHP code that loops forever checking the Apple feed-back server and then sleeps for a few minutes and then it begins all over again. Now I understand the error being generated if the network is down but once it got back up why did it continue until I have restarted the code? Does PHP have something that needs to be re-initialized or something?? Messges log: Dec 20 08:57:22 server kernel: r8169: eth0: link down Dec 20 08:57:28 server kernel: r8169 0000:06:00.0: eth0: link up Dec 20 08:57:29 server kernel: r8169: eth0: link down Dec 20 08:57:33 server kernel: r8169 0000:06:00.0: eth0: link up Dec 20 08:57:33 server kernel: r8169: eth0: link down Dec 20 08:57:37 server kernel: r8169 0000:06:00.0: eth0: link up Dec 20 08:57:38 server kernel: r8169: eth0: link down Dec 20 08:57:44 server kernel: r8169 0000:06:00.0: eth0: link up Dec 20 08:57:44 server kernel: r8169: eth0: link down Dec 20 08:57:52 server kernel: r8169 0000:06:00.0: eth0: link up Dec 20 08:57:52 server kernel: r8169: eth0: link down Dec 20 09:10:58 server kernel: r8169 0000:06:00.0: eth0: link up PHP Error: PHP Warning: stream_socket_client(): php_network_getaddresses: getaddrinfo failed: Name or service not known in /home/push/feedback.php on line 36 Code Line 36: $apns = stream_socket_client('ssl://feedback.sandbox.push.apple.com:2196', $errcode, $errstr, 60, STREAM_CLIENT_CONNECT, $stream_context);

  Read the article

• Large scale file replication with an option to "unsubscribe" from a replicated file on a given machine

  - by Alexander Gladysh

  I have a 100+ GB files per day incoming on one machine. (File size is arbitrary and can be adjusted as needed.) I have several other machines that do some work on these files. I need to reliably deliver each incoming file to the worker machines. A worker machine should be able to free its HDD from a file once it is done working with it. It is preferable that a file would be uploaded to the worker only once and then processed in place, and then deleted, without copying somewhere else — to minimize already high HDD load. (Worker itself requires quite a bit of bandwidth.) Please advise a solution that is not based on Java. None of existing replication solutions that I've seen can do the "free HDD from the file once processed" stuff — but maybe I'm missing something... A preferable solution should work with files (from the POV of our business logic code), not require the business logic to connect to some queue or other. (Internally the solution may use whatever technology it needs to — except Java.)

  Read the article

• How can I inject clips [ads] in a playlist every x minutes (even if previous clip is not over)

  - by azera

  Sorry for the title, I find it quite hard to describe what I want to do in a single sentence We have a few TV here linked to our computer, which we use to display clips about what we do in our sport center, what you should do to stay in good form ect ... It's running non stop, actually though vlc + playlist. Those main clips are 1-2 hours long and we have about 20 of them looping randomly all day. We would like to inject ads for some of our sponsiored products every now and then during the playlist, like say one ad every 15 minute. Does any one know how we can do that, while keeping the main clip random order ? I thought about encoding the whole thing as a single movie with ads inserted, but then it's not random. So we can put the ads in the playlist itself right ? Except clips are several hours long and we want that more often than that. Cutting the main clips in several pieces seems to work but that kind of sucks as new clips are made every month. If any one has an idea, thanks a lot

  Read the article

• What are ways to prevent files with the Right-to-Left Override Unicode character in their name (a malware spoofing method) from being written or read?

  - by galacticninja

  What are ways to avoid or prevent files with the RLO (Right-to-Left Override) Unicode character in their name (a malware method to spoof filenames) from being written or read in a Windows PC? More info on the RLO unicode character here: http://www.fileformat.info/info/unicode/char/202e/index.htm http://en.wikipedia.org/wiki/Bi-directional_text Info on the RLO unicode character when used by malware: http://www.ipa.jp/security/english/virus/press/201110/E_PR201110.html Mirror link: http://webcache.googleusercontent.com/search?q=cache:KasmfOvbVJ8J:www.ipa.jp/security/english/virus/press/201110/E_PR201110.html+&cd=1&hl=en&ct=clnk You can try this RLO character test webpage: http://www.fileformat.info/info/unicode/char/202e/browsertest.htm The RLO character is also already pasted in the 'Input Test' field in that webpage. Try typing there and notice that the characters you're typing are coming out in their reverse orders (right-to-left, instead of left-to-right). In filenames, the RLO character can be specifically positioned in the filename to spoof or masquerade as having a filename or file extension that is different than what it actually has. (Will still be hidden even if 'Hide extensions for known filetypes' is unchecked.) The only info I can find that has info on how to prevent files with the RLO character from being run is from the Information Technology Promotion Agency, Japan website: http://www.ipa.jp/security/english/virus/press/201110/E_PR201110.html (Mirror link). They adviced to use the Local Security Policy settings manager to block files with the RLO character in its name from being run. Can anyone recommend any other good solutions to prevent files with the RLO character in their names from being written or being read in the computer, or a way to alert the user if a file with the RLO character is detected? My OS is Windows 7, but I'll be looking for solutions for Windows XP, Vista and 7, or a solution that will work for all those OSes, to help people using those OSes too.

  Read the article

• Physical Debian to VMWare: vmware-converter, dd-image or otherwise?

  - by Dabu

  we have two debian Lenny production machines, both running larger commercial websites. Now these machines need to be moved, and in the process, they need to be virtualized to VMWare ESX. If you believe the internet information, there are several ways to accomplish this. The easiest for us would be to use our weekly dd backup where the whole disk, however, I have no experience with this kind of technology and if it is really possible. The second best way would be via an application on the source machine virtualizing it and generating an ESX compatible VM. However, the software is beta and unsupported, and after installation, nothing really works (the /etc/init.d/vmware-converter script doesn't actually do anything, start and stop reply with success messages, yet ps shows that there are no new processes). The worst way with the most work would be to install a new machine and set it up manually, copying files and databases as needed. This part is clear in it's execution, and my question(s) do not touch this. Is my 1st way possible? Has anyone done this yet, or better, has a page with instructions? Or is there a help page that explains how to correctly install, run and use the vmware-converter tool using a Debian installation (it's possible that I dod something wrong during installation already)? Thank you.

  Read the article

• High availability virtual machines

  - by Jeremy

  I've been reading a lot about high availability virtualization, either via Hyper-V or VMWare. In that context, essentially high availabliity means that the VM is hosted by a closter of physical servers (nodes), so if one of the physical servers goes down, the VM can still be served by other physical servers. So far so good, the physical cluster and the VM itself are highly available. However if the service being provided, let's say SQL server, MSDTC, or any other service, are actually being provided by the VM image and the virtualized operating system. So I imagine that there is still a point of failure at the virtual layer that isn't accounted for. Something could happen within the virtual machine itself that the physican cluster can not account for, correct? In that instance the physican failover cluster (Hyper-V) or VMWare host, can not fail over, because the issue is not with one of the servers in the physical cluster - failing over a physical node would not do any good. Does this necessitate building a virtual failover cluster on top of the physical one, or is this not necessary? Alternatively, I suppose you could skip the phsyical clustering, and just cluster at the virtual layer (Child based failover clustering), because that should still survive a physical failure. See image below showing parent based (left), child based (right) and a combination (center). Is parent based as far as you need to go, or is child based more appropriate?

  Read the article

• Windows-7 Ultimate 64 bit wont connect to my wired/wireless networks.

  - by A302

  Windows 7 Ultimate 64 bit. Everything was working fine & then just stopped working. The nic card Realtek PCIe GBE Family Controller is enabled but does not connect to my router (cables & router ports are good). Wireless Atheros AR5007EG is enabled but the connection is limited (encryption type / key have been verified). A laptop running XP can connect both wired / wireless. SSID is not being broadcast, connect to network if it is not broadcasting is checked. Have checked services.msc for Bonjour & did not see it listed. Network & sharing center does not list any active networks. Device manager lists both devices as functioning properly. Router configuration has not been changed. Virus scan has not found anything. I would like to fix this rather than using Acronis to do a system restore. Thanks in advance for any advice offered in solving this. 26 Jan, the nic card & wireless are working using PCLinux OS Live CD. It appears that the problem is Windows 7 related.

  Read the article

• Setting up Web server so it is easy to migrate

  - by Nyxynyx

  Hi I am about to move my site from a VPS to another host's dedicated server. One of my concern is about scaling the site in the future that involves a change of server. Now that I am starting the dedicated server from scratch with only the OS, this means that I need to install the web server stack, including Apache and its mods, PHP, MySQL, PostgreSQL, Tomcat, Solr and a few other softwares like ImageMagick and git. Question: Is there a way for me to setup this new dedicated server such that I can easily migrate the entire site, both the technology stack and the code to the a newer server (upgrade from this new dedicated server) easily without reinstalling and reconfiguring everything? The code for the website is being handled by git and github so thats not a problem. I'm more conerned about the rest of the software required. Side question: The current VPS uses CentOs with cpanel and it seems that many packages are outdated on yum and cpanel interfers with the installation of many packages. Which OS should I go with for the new server? Ubuntu?

  Read the article

• How do i play nicely with MS SQL/SQL Server 2008

  - by acidzombie24

  Big problem. I have nearly given up. I am trying to port my prototype to use MS SQL so it will work on a server once i get it (the server will be SQL Server 2008, shared, i dont know any more info). So i tried to connect to SQL Server via visual studios IDE and had no luck. I enabled TCP and named pipes and restarted the service (and computer) with still no luck. I remembered about mdf files so i made that after an obstacle of not being able to make the connect string require i figure out visual studio has it in its properties and successfully connected with that. Then i had a problem with nested transactions. After not being able to figure out how to check i wondered if i can configure it to allow it somehow. I always thought all of MS were the same except for limitations but sql server seems to support nested transactions so theres no point trying to work around the problem with .mdf files since i wont need them and really just used it to port the base of my sql code and to check if syntax is correct. I tried installing SQL Server Management Studio since people mentioned it several times (as a solution or at least help). When installing it on windows 7 it says it may not be compatible. After running it, it launched SQL Server Installation Center (64-bit) which doesnt seem to be the same thing as i dont see a way to modify any of my server (networking) configurations or edit user permissions, etc. I am clueless what to do next. Does anyone have any ideas? I'm posting here bc i think my problem is more configurations and sql server then programming.

  Read the article

• How to diagnose issue between mobo, RAID, and SSD cache drive? [migrated]

  - by goober

  Background This issue is happening on my custom-built desktop. Relevant specs: Motherboard: ASUS P8Z68-V PRO Utilizing Intel RST technology (application that uses unused SSD as cache) Processor: Intel core i7-2600k (not overclocked) HDDs: RAID1 of 2x Seagate Barracuda 1TB (ST31000524AS) (RAID performed via z68 chipset) Machine has run fine for ~1 year with no issues, and has been well-maintained (dust, etc.) What Happened Random Freezing issues -- intermittent Looked at the RST application screen to see that the acceleration cache was listed as "unavailable" -- recommended that I power down and reconnect the drive. Reconnected the drive to no avail. Attempted to move the drive to another SATA port. Acceleration option disappeared from RST software. Now, the freeze happens whenever loading something particularly data-driven (a video, a game, etc.) Steps Attempted Reconnected the drive to no avail. Updated Intel RST software to v. 11.6.0.1030 to see if that made a difference. Attempted to move the drive to another SATA port. Acceleration option disappeared from RST software. Connected the drive as its own volume. Formatted it, ran disk check errors -- all seems fine. Reconnected the drive and selected it again as the cache drive. Now, what happens when there is a freeze: Machine freezes I am unable to perform any command Screen then goes black I hit the reset button During boot, all drives show as "Disabled" and I am told no volume can be found I then hit the reset button (or power off/on) again. Either the next time (or sometimes after repeating this once more), the metadata cache is reconstructed and the system boots fine, showing the SSD as a cache. Question I believe this is an issue with the SSD itself, but how can I be sure since connecting it separately appeared to show no problems? I want to make sure it's not an issue with the motherboard, SATA ports, etc.

  Read the article

• How do I activate the F_LINE input in a transplanted HP chassis?

  - by admin

  I have an HP Pavilion Media Center PC chassis, vintage 2003 or so and I replaced the motherboard in it with a newer (vintage 2009) HP motherboard, M2N68-LA (Narra 5). I have scoured the internet trying to find pinouts for the motherboard to no avail. My question concerns the front panel audio, specifically Line In. The old chassis was built for AC97 but the new mobo is build for the newer HD audio standard. I figured out by comparison & experimentally how to connect the Mic & Headphone jacks to the HD audio header of the mobo by adding a manual switch to set the SENSE lines. Now all works fine for Mic & headphone. The old chassis also has a front panel Line In jack that the newer HP chassis does not have. However, the new mobo has a 4 pin white connector labeled F_LINE that I believe is a line input. Under Windows 7 I see the two Line Inputs in the mixer but I can't get one of them to become active. The 4 pin F_LINE connector uses the two middle pins for ground, and presumably the other two for left and right audio inputs. There are no pins for sensing on that connector. Can anyone tell me how to use that F_LINE input for the front panel, or how to activate it?

  Read the article

• ATI Radeon 5670 Won't Show Resolutions over 1400x900

  - by Phil Sandler

  Just got my new Dell computer with Windows 7 and an ATI Radeon 5670. I attached it to my current monitor, which is a Samsung 24" (2443bwt). Windows 7 does not allow me to display in resolutions greater than 1400 x 900. The setup through a VGA cable into the VGA port of the card. The card also has a DVI port, but I need to use the VGA port because a KVM that supports VGA only. My old PC (which is Windows XP, GeForce 8600 video) can display in 1900 x 1200 on the same monitor (which is what I want) and even higher. It does this through a vga cable also connected to the KVM (through the DVI port but using an adapter). I have tried the same setup (DVI = VGA adapter) on the new PC and nothing changed. I have tried: Updating the drivers via Windows "Update Driver" (says they are current) Installing the updated version of the drivers from ATI (made no difference) Installing Powerstrip (all the options I would need for a custom resolution are greyed out) Installing the drivers/software from ATI caused the ATI Catalyst Control Center software to stop functioning, so I can no longer even start it. I have found some references to other people having this problem and instructions on cleaning the software off and reinstalling it (as uninstalling normally doesn't solve it). I will try this tonight. In any case, I didn't see any options in CCC that would allow me to override the settings for max resolution. However I didn't tinker with it too much before I tried updating the drivers, so I may have missed a setting. I contacted Samsung via online chat and they say it's a problem with the video card/driver (of course--what else would they say?). Any thoughts on what else I could try?

  Read the article

• Unexpected media key behavior on new Acer Aspire

  - by Morgan May

  I'm having weird issues with the media keys (play/pause, previous, next, etc.) on a new Acer Aspire laptop. This is the first Acer I've owned and also my first Windows 7 computer, so I'm not sure whether the behavior is a result of some hidden Acer process that I haven't rooted out yet, or some Windows 7 option that I'm not aware of, or something else. I'm experiencing two issues that I suspect are related. Both problems are intermittent but happen more often than not. The media player I'm using is Winamp. I'm pretty sure I've had the same problem when using other media players, but when I tried to verify that before posting this, I only had the problems with Winamp. Because the problems are intermittent, I'm not sure if that's significant. 1) When I press the Play/Pause media key, in addition to playing or pausing the media player, it brings up a little menu in the center of the screen that lists my removable drives (CD/DVD, USB drives, etc.). To make the menu go away I have to either click away from it or hit Escape. Selecting a drive on the menu doesn't seem to do anything. 2) When I press the Previous or Next media keys, it skips 2+ tracks instead of just one (the exact number seems to vary). I've poked around all the control panel options that I can find, and looked through all the utilities that came with the computer with no luck. There's nothing that I can find in the (very slim) documentation, either. I have a hunch that the problem is caused by whatever utility manages global hotkeys, but I haven't found any way to configure that. Any guidance would be greatly appreciated. UPDATE: It looks like Winamp was the culprit. I did have the problem when using other media players, but when I uninstalled Winamp, the problem went away. I'd like to use Winamp, but I can survive with other players.

  Read the article

• Explorer constantly hanging

  - by user978122

  So I'm running Windows 7 Ultimate (x64) an AMD 8150 on an Asus Crosshair V motherboard with all the latest and greatest patches, and I am experiencing frequent Explorer freezes. I've included the information I've grepped from the Event Viewer below: The program Explorer.EXE version 6.1.7601.17567 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel. Process ID: 13a4 Start Time: 01cdb2968999c6fd Termination Time: 0 Application Path: C:\Windows\Explorer.EXE Report Id: c000ba44-1e8b-11e2-9ae7-000272ddf2b0 - System - Provider [ Name] Application Hang - EventID 1002 [ Qualifiers] 0 Level 2 Task 101 Keywords 0x80000000000000 - TimeCreated [ SystemTime] 2012-10-25T10:08:44.000000000Z EventRecordID 14626 Channel Application Computer RyanMain-PC Security - EventData Explorer.EXE 6.1.7601.17567 13a4 01cdb2968999c6fd 0 C:\Windows\Explorer.EXE c000ba44-1e8b-11e2-9ae7-000272ddf2b0 430072006F00730073002D0074006800720065006100640000000000 -------------------------------------------------------------------------------- Binary data: In Words 0000: 00720043 0073006F 002D0073 00680074 0008: 00650072 00640061 00000000 In Bytes 0000: 43 00 72 00 6F 00 73 00 C.r.o.s. 0008: 73 00 2D 00 74 00 68 00 s.-.t.h. 0010: 72 00 65 00 61 00 64 00 r.e.a.d. 0018: 00 00 00 00 .... Any idea what "Cross-thread" here means?

  Read the article

• Linux: 3 Monitor PCI-e Graphics card (without tremendous pain)?

  - by N Rahl

  As we are all painfully aware, the only way to get multiple monitors AND compositing (Compiz) on Linux is to use a single graphics card that can drive both (or in my case all three) screens. I bought a Radeon 5750 specifically because it claims to able to drive 3 monitors. I can plug in 3 monitors (2 DVI, 1 HDMI) and the Catalyst Control Center shows all 3, but only 2 can be enabled at a time. I'll post the exact error message here soon, but it's very useless. So I'm going to assume that either the 5750 doesn't support 3 monitors, OR, more likely, ATI couldn't be bothered to add that support to their Linux drivers. So this is a multipart question: First, can anyone suggest a PCI Express Graphics card that can run 3 screens on linux without tremendous pain? I'm looking for something where you install the driver and all three screens "just work". Does such a card exist? Second, if you have a 5750, have you been able to get it to do 3 monitors? I'm running Ubuntu 10.04 at the moment. Thanks, Nick

  Read the article

• How to set up Windows 7 Professional as a NAS

  - by Enyalius

  I searched and didn't find any answers, so please forgive me if this is a repeat. Anyway, I have an older computer that I'm using as an HTPC, and I was hoping that I could use it as a NAS/multimedia server, as well. My primary uses would include accessing content on my PS3 (same LAN), accessing content from other computers on my home network and (if I can) accessing content from my Android phone over the internet. I have used SubSonic to stream music to my Android phone and other computers before, but I would really like to find a way to do this natively if possible. I know that I can buy external hard disk cases that can plug in the USB port of my router, that I can get a Drobo or other network storage solution, but I would really just rather not spend the money (especially considering that I already have a computer that I should be able to use). Hardware involved: Apple AirPort Extreme base station router (most recent revision) Home Theater Personal Computer: Core 2 Duo @ 2.4GHz, 8GB DDR2 RAM, ~3.5TB hard drive space Sony Playstaiton 3 Thin 120GB HTC Thunderbolt (I have 4G coverage) rooted and running Android 2.2.1 Various Apple laptops Various Windows 7 desktops/laptops Thanks in advance! Note- I have looked at open source NAS software but I would like to preserve the Windows Media Center functionality in Windows 7, so other NAS software is not an option for me currently. .

  Read the article

• VOIP and internet connection speeds [cable vs. fiber]

  - by microchasm

  Our office is migrating to IP telephony. We have less than 10 employees that will be using the phones. We currently have cable internet, and they just bumped the speeds: There is a data center that was just recently built in our building, and we were considering co-lo'ing there in the near future. As a result, they offered us access to their triple-redundant internet, but it's quite expensive. They are offering 3mbps committed with up to 10mbps burst for $250/month (discounted). We pay ~$120 for our cable (which the plan was to keep--at least for TV). I want the phone system and LAN to be as separate as possible. Was thinking about keeping the cable for LAN, and using the other connection for the phones (until I saw the price). Now I'm thinking it might make sense to add on to our existing cable setup, and change our phone to only have DSL as a backup for the cable. Is there any real benefit to the fiber? Especially for the price? Any other suggestions or ideas? Thanks.

  Read the article

• Microphone array support in Windows. Info on performance and compatible hardware?

  - by exinocactus

  It is officially claimed by Microsoft (Audio Device Technologies for Windows), that Windows Vista has an integrated system-level support of microphone arrays for improved sound capturing by isolating a sound source in target direction and rejecting ambient noise and reverberation. In more technical terms, an implementation of an adaptive beamformer. Theoretically, microphone arrays with 2-4 mics can substantially improve SNR under some conditions like speaker in front of the laptop in noisy environment (airport, cafe). Surprisingly, though, I find very little information about commercially-available products supporting these new features. I mean products like portable usb micropone arrays or laptops or flat screens with integrated mic arrays. I could only find info about two laptop models having "noise cancelling digital array microphone". These are Dell Latitude and Eee PC 1008P-KR. Now my questions: Do you have any experience with the Windows beamformer implementation? For instance, in the above mentioned laptops. How well does it work? Are there any tests results available in the net or in print (papers?)? Do you know about other microphone array hardware? What could be the reason why mic array technology didn't get sucess Is there mic arrays support in 'Windows 7'?

  Read the article

• Disk operations in windows 7 are slow

  - by Skadlig

  My computer started lagging last Sunday. I tried to reboot it and it failed. Trying to boot into failsafe mode takes around two hours. It mainly freezes on two files: scsiport.sys and classpnp.sys When it finally has started all disc operations are really slow. When it has run for a while it goes faster, probably due to data moved into RAM instead. It froze on an other file before that was associated with Avast but uninstalling it didn't really help. A critical windows update was installed on Sunday but rolling back the update didn't help. I had a guess about the sound card but disabling the sound card drivers also didn’t help. I have an inkling of an idea that it might be Intel rapid storage technology that might be acting up but it doesn't allow me to reinstall it from failsafe mode and I haven't been able to log into normal mode for a while. I would appreciate suggestions regarding how to get into normal mode again and/or what can be the root cause.

  Read the article

• Sound doesn't work anymore after replacing RAM

  - by thejh

  Hello, today, I replaced one old RAM module with two newer, bigger ones, but now, the sound doesn't seem to work anymore. Already ran alsaconf and it didn't help. Output of lspci for the audio device: 00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1) Subsystem: Giga-byte Technology Device a002 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (500ns min, 1250ns max) Interrupt: pin A routed to IRQ 21 Region 0: Memory at f5100000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Masking: 00000000 Pending: 00000000 Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+ Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel The audio device is onboard and has six configurable outputs, two or so are also capable of being an input (if I remember it correctly), but I don't know how to control it under linux. Does somebody know how/whether replacing the RAM could be related to my problem and/or how to fix it?

  Read the article

• JavaScript settings are on but I still have issues with web sites using JavaScript.

  - by Mike

  I have two computers that are the same at home except I have installed Adobe Acrobat 9 Pro Extended on my main computer along with the 2010 Outlook (Beta). I have issues when I log into a website that uses pop up calendars to select the date. I pasted it below. I checked my other computer and it is fine. I've checked the Java setting and they are correct. I am at a loss. Any suggestions? Webpage error details User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; HPDTDF; OfficeLiveConnector.1.4; OfficeLivePatch.1.3; eMusic DLM/4; .NET4.0C) Timestamp: Mon, 26 Jul 2010 22:03:59 UTC Message: 'CalendarPopup' is undefined Line: 390 Char: 2 Code: 0 Message: 'CalendarPopup' is undefined Line: 410 Char: 2 Code: 0

  Read the article

• Software for RAID Failure Alerts?

  - by QF_Developer

  I have two 256 GB Samsung 840 Pro SSD disks in a RAID 1 array. I would like to receive a notification if one of the disks in the array fails. Can anybody recommend an application I can install on the server to fire an email if such an event occurs? Here are some additional specs: Supermicro X9SCM-IIF motherboard utilising the hardware RAID controller. OS = Windows 2012 Standard Also is it possible to simulate a disk failure by pulling it out of the bay? SSDs appear to fail close together when in a mirrored config so I'd like to know ASAP if one goes down so I can swap them out with minimum delay. UPDATE 26th June 2013 ------------------------ None of the software that ships with the Supermicro X9SCM-* motherboards offer support for RAID monitoring. As has been pointed out here, these boards are built on an Intel chipset for RAID and so I installed Intel Rapid Storage Technology that supports automated email notifications on RAID failure http://www.intel.com/support/chipsets/imsm/sb/cs-020784.htm One small issue, the software only allows you to send email notifications without SMTP authentication. There's a bunch of different workarounds here: http://communities.intel.com/thread/30771

  Read the article

• Can I install windows on an SSD and access data from my old windows HDD?

  - by nzifnab

  I purchased new computer components, switching my hardware from AMD and Radeon to Intel and Nvidia. I kept components from my old computer like the powersupply and two HDDs. Everything appeared to install correctly and the system booted into the BIOS just fine (after a brief snafu with the CPU fan). My goal was to use the two harddrives and just be able to turn on the computer and load up my old windows install with all the files, programs, and documents. I expected to have to call Microsoft to re-register the windows install for the new hardware (since I had to do that last time I upgraded w/ the same windows version). When the computer attempts to boot into windows it briefly flashes a bluescreen and then restarts. System recovery gives a message something like "BadDriver Failover" something something. I assume this is because it's trying to use amd drivers for an intel chipset (or something...?) and I've been as-yet unsuccessful in getting it to boot into my old windows partition. SO! I decided eff it, maybe I'll go visit my nearest Micro Center and buy a 200 GB SSD, install windows onto that, and then... be able to access just the contents of both of my other harddrives? I don't intend on running any of the programs but there were some saved files I would like to salvage from the 500 GB harddrive, The 1.5 TB harddrive only had files on it, no OS or applications so I'd also expect to still be able to access it. Is this possible? Can I install the SSD and only format/install windows onto it and still access the contents from my two transferred-over drives?

  Read the article

• Cisco AnyConnect VPN client - prevent connecting as work network

  - by Opmet

  From Windows 7 I'm using "Cisco AnyConnect Secure Mobility Client 3.0" to connect to our corporate network. Every time I establish the VPN connection Windows will set the type as "work network". I don't want this. So I go to "network and sharing center" and manually / interactively change it to "public network". But I have to repeat it for every new VPN connection. Is there any way to make Windows remember / persist this configuration? Can it be configured in the VPN client? Do our IT admins need to change something at server end? Motivation: A "work network" per default uses different firewall settings that allows for stuff like "network discovery" and "file shares". But I just need "remote desktop" (mstsc). Additional info: Our IT admins claimed this would be Windows default behaviour and there was nothing we could do about it: Windows would always initiate a VPN connection as "work network". Based on this statement I assume this is a "general" issue and went ahead posting here (at superuser.com).

  Read the article

< Previous Page | 420 421 422 423 424 425 426 427 428 429 430 431  | Next Page >