Search Results

Search found 16598 results on 664 pages for 'device center'.

Page 426/664 | < Previous Page | 422 423 424 425 426 427 428 429 430 431 432 433  | Next Page >

• Efficiently installing fully-patched Windows XP, IE, and Office 2007 on an isolated PC

  - by JPaget

  I have been tasked to install Windows XP, IE, and Office 2007 on a computer that will become part of a standalone network not connected to the Internet. What is a good way to install all of the security updates? I'm installing from CD's of Windows XP SP2 and MS Office 2007. Next I plan to download Windows XP SP3 and Office 2007 SP2, burn them to CD's, and install both service packs. Finally I plan to go to the Microsoft Download Center and download all applicable security updates, burn then to CD, and install them. I estimate that there are over 100 of these updates. Is there a more efficient way to do this?

  Read the article

• Open a remote folder in windows mobile

  - by Luis

  I have a device with windows mobile 6.1 and I want to open a shared folder on my laptop with the file browser... Both are connected to the same wireless network, both have access to internet but I can't have access between them... I have used open path in the file explorer and nothing... I shut down the firewall on mi laptop but still I can't access.. I don't know anything about permissions if that is the problema because I'm a novice... if anyone can helpme I'll appreciate it a lot...Thanks...

  Read the article

• Video streaming and internet browsing on different bands/frequency

  - by user47207

  I have a Netgear WDNR37000 which allows clients on a 2ghz or 5ghz to access the internet and see every client and device on the network. I have a computer with two nics, one that is in the 2ghz range and the other on the 5ghz range. My specific problem is that I would like to serve my video streams (hulu, ps3mediaserver, playon) to my ps3 on the 5ghz band while internet browsing is routed to the 2ghz band. This is so that the video streams aren't affected by general internet use. While the easiest solution would be to disable internet access on the 5ghz apn, I would like to know of a solution that would not require that.

  Read the article

• VMware Fusion on MacBook Pro running Vista, not working after installing a wireless card

  - by Shelley

  A tech friend installed VMware on my Mac so I could use my Windows programs as well. It worked great until I inserted my Sierra 881 USB wireless card while in VMware trying to get to the internet while on the road. It worked briefly, then the AT&T Communication manager won't respond when you click on the icon, I can't open Network and Sharing center, I can't sync my palm - shows it can't connect. Looks like it messed up several things, along with not being able to connect to the internet while in windows. This wireless cards works directly from the Mac - but I need internet while in Windows for some work I am doing. How do I uninstall this - when I try - it just gives me an endless reloading circle - not doing anything. I really need to sync my palm and get back to the way it was. I don't know much about VMware at all and I don't have access to my friend right now to get help.

  Read the article

• Why can't I access the WebUI of my DNS-323 NAS after a firmware upgrade?

  - by anonymous2

  Hi Everyone, I just bought a D-Link DNS-323 NAS Enclosure, and have run into a problem. I read that the firmware that had shipped with (1.07) did not support 2TB drives, so I downloaded firmware 1.08. Turned on the device for thwe first time and went straight to the WebUI (everything looked/worked fine) Proceeded with the firmware update, completed successfully. Rebooted and I cannot access the WebUI. I can see the NAS connected via my router interface I can also ping the ip adress assigned, but I cannot access the WebUI or find it via D-Link easy search software. I have tried the factory reset button, but that does not seem to be doing anything, the square blue light just keeps flashing from the moment the unit is powered on, whether I press the reset button or not, and the symptoms remain the same... PS. I did/do not have any drives installed yet. Please help?

  Read the article

• HP DL380 G5 Predictive failure of a new drive

  - by CharlieJ

  Consolidated Error Report: Controller: Smart Array P400 in slot 3 Device: Physical Drive 1I:1:1 Message: Predictive failure. We have an HP DL380 G5 server with two 72GB 15k SAS drives configured in RAID1. A couple weeks ago, the server reported a drive failure on Drive 1. We replaced the drive with a brand new HDD -- same spares number. A few days ago, the server started reporting a predictive drive failure on the new drive, in the same bay. Is it likely the new drive is bad... or more likely we have a bay failure problem? This is a production server, so any advice would be appreciated. I have another spare drive, so I can hot swap it if this is a fluke and new drive is just bad. THANKS! CharlieJ

  Read the article

• Windows 8.1 wants to format a USB stick with an unusual but valid GPT partitioning scheme, why?

  - by DonGar

  I have a USB stick formatted with GPT partitions. Some of the partitions are ext2, some are ext4, some are custom and funky. However, there is also a standard EFI partition, and a standard vfat partition. In Windows 7, both the EFI partition and the standard VFAT partition are visible and mount normally. But Windows 8.1 prompts to reformat the drive when it's inserted. I'm not surprised if Win 8 hides the EFI partition, but I didn't expect it to prompt for reformatting. I want to leave existing partitions alone, but have a VFAT partition that Windows 7, 8, and 8.1 will mount and display normally. Exactly how does Win 8 decide if a device needs to be formatted?

  Read the article

• Computer to act as keyboard

  - by Joe

  Title explains it. Imagine this example, Host computer connects to a Client computer via male/male usb connection. Client computer acknowledges this connection as a new device, in this case a keyboard. The host computer can now send key events to the client computer and the client computer would process them as a normal keyboard event. I did a whole lot of searching in the internet and really have drove down many dead ends. Any tips would be appreciated. Note* this is a physical connection. The client computer should not have to install any software for this to function (The host will completely spoof as a keyboard).

  Read the article

• Subnetting design for a new building?

  - by Zombie

  A building with 4 floors, each floor is divided as follows; 15 users for accounting, 15 users for finance and 15 users for marketing (i.e 45 user in each floor). Data center is located on the ground floor, with 45 servers to be divided into 15 for all the accounting users in the four floors, another 15 for the finance and the last 15 for the marketing. (i.e each 15 server for each one of the above categories are separated from the other 15 and so on) What is the proper subnetting design for such scenario? Knowing that we are allowed to use anything we want!

  Read the article

• Windows 7 ATI 6470M

  - by p_piorkowski

  I have some problems with my Dell Vostro 3350. I have to graphic card - Intel and ATI radeon 6470M. I have installed this driver. It's fresh installation of Windows 7. And my problem is that in device menager I can see in section graphic cards AMD Radeon HD 6490M and Intel(R) Graphics Family. Another thing is that I'm using two screens. And I want to use ATI readeon as default. At this moment I'm event not sure if ATI is working. Another strange thing is that when I run Catalyst Control Center in section Destkop Menagement i don't see nothing.

  Read the article

• Two routers in a LAN

  - by taxi

  router A no wifi +--- pc01 +--- pc02 | +--- router B wifi +--- pc03 +--- printer In my LAN I have a modem-router (say A) (no wifi connection) acting as DHCP server, and connected to the Internet. Now, I want to add another router (say B) (with wifi connection) to the LAN, in order to connect wifi pc's and net printers. Here I would disable DCHP server functionality. Is it correct to connect router B to router A via an ethernet port? In router A I define an IP address (eg 192.168.1.100) to be assigned to router B (MAC address). I expect to see router B listed as an attached device, in router A's status, but on the contrary it is not listed.

  Read the article

• How do I listen to my microphone through my speakers in Windows 7?

  - by Gray Adams

  I've looked about and before you say it: I've used the "Listen to this device" feature built into Windows. The issue is that it is a USB microphone and there is a second delay before when it plays on the speakers, literally making me go quiet because my brain doesn't work too well hearing myself a second after I say something. I use Realtek Audio, so it works differently from the monopolistic Creative sound cards. There is no "What U Hear" or "Line In" levels. It's just "Speakers" and "Microphone". Is there a software I can use that will not have delay? I want to wear nice headphones and still hear myself

  Read the article

• Need help making a bootable portable USB hard drive. [Utility I need will only create bootable CDs or USB flash drives]

  - by Sootah

  I've got a copy of Spotmau's Bootsuite 2012, which is an utterly fantastic tool. It has completely replaced Bart PE for me, and I relied on BPE for YEARS. Anyway, the issue I'm having is that the Bootsuite installer utility will only create bootable USB flash drives, or bootable CDs. The USB hard drive is detected as a hard drive instead of as a USB device, and as such I cannot use the included app to install to the USB HDD. Is there a way of either copying the files from a bootable flash drive to a USB HDD and making that work, or of taking an .ISO of the bootable CD and using that to make the portable HD bootable? The flash drives I've made of it are great as I can always have it with me [have 16GB dangling from my keychain. :) ], but my USB hard drive is FAR faster than any flash drive I have, so I'd like to be able to use that when I'm working out of my office or happen to have it with me.

  Read the article

• What protocols will/are ISPs use for IPv6 deployment?

  - by rbeede

  Currently ISPs deal out addresses via DHCP for IPv4 dynamic (single) addresses. What protocol will/are ISPs going to use for IPv6 when they can hand a customer an entire /64 (or /48 if they are nice) block? DHCPv6, RA? For ISPs that support true end-to-end IPv6 will they provide gateway devices (similar to cable modem or true DSL bridges for example) that receive border information for that specific customer? I'm just trying to get an idea of how your common residential service customer will have to configure things in an IPv6 Internet (whenever that comes). Will it be something customers are expected to statically configure on their home wireless router? Today with IPv4 I do it like this: Modem (bridge) passes public IPv4 obtained via DHCPv4 from ISP to second device (wireless router). It in turn has its own DHCPv4 service it provides on the internal lan.

  Read the article

• Shrink NTFS Partition Windows 2003

  - by Coops

  We have an iSCSI target provided by a CentOS server attached to a Windows Server 2003 Standard box, formatted in NTFS. My question is this - I know we can resize the backend block device fine (LVM et al.), however how do you tell Windows the NTFS filesystem has shrunk afterwards? [note we want to shrink]. I'm imagining a world of pain if it's not done correctly! This is a production box, so ideally we'd like the process to keep the drive mounted and online during the process, but downtime can be scheduled if need be. 90% of what I've found on the subject so far basically involves using the 'ntfsresize' command in Linux to do the job -- but surely Windows can do this itself? Cheers!

  Read the article

• Snapshot/Save GPU Drivers

  - by ashes999

  Since I'm running XP/32-bit, my GPU drivers are quite fragile. I've spent several hours trying to back up and restore from old versions, on at least two separate occasions. Writing down the device drivers is not enough. In the short term, I would like to somehow save, zip, backup, snapshot, or something so that if I need to reinstall my OS in the short-term, I have a reliable way to get the drivers. ATI's website doesn't have the install kit anymore, and I don't have it saved; I googled, but didn't find the exact same version. How can I backup/save my drivers so that I can reinstall them later?

  Read the article

• Ultrabook graphics card for gaming

  - by Francisc

  I want to get a Windows 8 "ultrabook" that I can also use for gaming. Most seem to have Intel HD Graphics 4000 (integrated) or NVIDIA GeForce GT 620M (dedicated). From experience, are they any good? Things I enjoy playing are Call of Duty, Fifa and Skyrim for example. I'm looking for a device that will work on the next generation of those games as well, so it shouldn't just barely work on the current versions that exist now. So, would those two cards suffice? Any advice is much appreciated. Thank you.

  Read the article

• Asterisk is hacking itself [duplicate]

  - by Shirker

  This question already has an answer here: How do I deal with a compromised server? 11 answers I've got some strange logs on my asterisk (and there a lot of extensions were tried): chan_sip.c: Failed to authenticate device 6006<sip:[email protected]>;tag=f106f3fe but IP XX.XX.XX.39 is its OWN IP! cat /etc/asterisk/* | grep 6006 returns nothing. asterisk -rv Asterisk 11.4.0 How its possible, that its hacks itself? And how could I trace, where it comes from?

  Read the article

• Master Boot Record

  - by Crystal

  I'm trying to understand what an MBR is. I know it is used to boot the device, like a compact flash card. If you had five 1GB CF card from SanDisk for a camera, would there be any reason for the manufacturer to have different MBRs? It seems like to me, if for some reason one CF card wouldn't boot, you could copy the MBR from a working CF card and write it to the non-working CF card. Would this MBR for a SanDisk card work on the same size Western Digital card for the same use? Thanks!

  Read the article

• Cisco WLAN Controller not pushing out DHCP addresses, what else could it be?

  - by Name

  On our Cisco WLAN Controller web interfaces, in Controller Interfaces, I have made a new interface with these settings: VLAN Identifier 202 IP Address 172.16.202.1 Netmask 255.255.255.0 Gateway 172.16.202.254 Primary DHCP Server 172.16.100.3 Secondary DHCP Server 172.16.100.2 Port: LAG I've also made a new WLAN and assigned it to the above interface. I have saved changes. But our wireless devices, although they seem to authenticate with the WLAN fine, they always get stuck on "obtaining DHCP address", so it seems the WLAN Controller isn't pushing out DHCP addresses to our devices. We do have a DHCP scope for the above in Windows Server 2008 R2 and everything there seems fine. If I connect a device with a static address (e.g. 172.16.202.10), it will connect. Stuck on what to do :(

  Read the article

• Windows 7 - all usb devices go to sleep im idle mode

  - by dvdx

  A strange thing happened after a few updates to the system: Intel rapid storage SSD firmware update Intel Ethernet adapter update GPU Intel update When the computer turns off the screen (after 5 min), an unknown time later, all the USB devices stop working. Sound card Mouse Keybord etc. I can't turn them back on, so I can't wake up the screen or do anything except turn the computer off and back on. I checked my power save profile and all is OK there. I changed in the Device Manager, the Allow USB to sleep in all the hubs. How can I fix this??

  Read the article

• Locale setting on a Red Hat box

  - by sasuke

  Hi all, Recently our organization got a couple of server boxes which are I guess present in some data-center in UK. The problem is that for some reason the default Locale representation in Java on that server returns en_US instead of the expected en_GB (I confirmed this by running a code on that server which simply outputs Locale.default()). I am pretty sure this has got something to do the way in which the boxes were set up. My question is: what would be the approach to fix this issue now that the OS has been installed? Is there any way I can for a given SSH session set the locale as en_GB instead of the current en_US? TIA, sasuke

  Read the article

• Postgres Remote Access

  - by boot-baby-boot

  I am trying to connect to postgres remotely.I have followed this tutorial http://www.cyberciti.biz/faq/howto-fedora-linux-install-postgresql-server/ and have executed the following commands to see if the remote access is possible. [root@printmyworld ~]# egrep -i "(listen_addresses|port|tcpip_socket).*=.+" /var /lib/pgsql/data/postgresql.conf #listen_addresses = '*' # what IP address(es) to listen on; #port = 5432 [root@printmyworld ~]# lsof +c0 -anPiTCP -upostgres COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME postmaster 9323 postgres 3u IPv4 2875987353 TCP 127.0.0.1:5432 (LISTEN ) postmaster 9323 postgres 4u IPv6 2875987354 TCP [::1]:5432 (LISTEN) I am suspicious of this line: postmaster 9323 postgres 3u IPv4 2875987353 TCP 127.0.0.1:5432 (LISTEN My server ip address is 1yy.000.1xx.000 .Should it be 1yy.000.1xx.000:5432

  Read the article

• Hard drive partition size wrong. How do I resize without loss of data?

  - by BreezyChick89

  $ fsck fsck from util-linux 2.20.1 e2fsck 1.42 (29-Nov-2011) The filesystem size (according to the superblock) is 610471680 blocks The physical size of the device is 536870911 blocks Either the superblock or the partition table is likely to be corrupt! It should be 1 partition but it now shows 2.2tb partitioned and .3tb unpartitioned How do I make the first partition correctly be 2.5tb without destroying whatever is in either partition? I did not raid or anything. My devices have been getting repeatedly corrupt by thunderstorms. Looks like people recommend doing something like in other places. sudo resize2fs /dev/sdc1 610471680

  Read the article

• Is there a Google Authenticator desktop client?

  - by cwd

  I am using Google Authenticator for 2-step authentication. I like how I can use a code and verify my account using my phone: I realize that the app was designed to run on a device other than a computer to increase security for the computer (in case that it is lost or stolen), but I would like to know if there is a way I can run Google Authenticator on my Macbook. Now, per the Google Authenticator Page it will not run on a desktop: What devices does Google Authenticator work on? Android version 2.1 or later BlackBerry OS 4.5 - 6.0 iPhone iOS 3.1.3 or later However there are several emulators for developers and so I wonder if it is possible to run one of these emulators and then run Google Authenticator with that. I do realize this is not a best practice - but I'm less worried about my laptop getting stolen and more worried about someone just hacking the account. So my question is this: Is it possible to run it on the desktop, even though it is not meant to be / not recommended?

  Read the article

< Previous Page | 422 423 424 425 426 427 428 429 430 431 432 433  | Next Page >