Search Results

Search found 12281 results on 492 pages for 'ip blocking'.

Page 426/492 | < Previous Page | 422 423 424 425 426 427 428 429 430 431 432 433  | Next Page >

• Using "route add" to tell my computer to use a direct ethernet connexion instead of wifi ?

  - by TheSamFrom1984

  2 PCs are involved. Both are connected to the internet via Wifi on the same router. I can ping to/from each other and share folders flawlessly, but I'd like to be able to set a direct Ethernet link between them to speed up file transfers AND keep the Wifi connections (no gateway). So I plugged my RJ45 cable, and set up the connection. It works, but the PCs are only using this connection if one of them if disconnected from the Wifi. PC1 local address is 192.168.0.7 on its ethernet interface, and 192.168.1.21 on the wifi one. PC2 local address is 192.168.0.6 on its ethernet interface, and 192.168.1.22 on the wifi one. My question is : I'd like to using the route add command to tell PC1 to use the Ethernet interface when it needs to connect with PC2, by specifying "IF 2" at the end of the route add command. How can I do this ? I don't know what to put in the "gateway" parameter of the command, and everything I tried returns "the parameter is incorrect" (i don't know which one). ipconfig /all on PC1 : Windows IP Configuration Host Name . . . . . . . . . . . . : Sam-PC Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : NETGEAR WG111v3 54Mbps Wireless USB 2.0 Adapter Physical Address. . . . . . . . . : 00-22-3F-DA-51-56 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::1d33:60b:476c:d396%12(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.1.21(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : vendredi 27 novembre 2009 15:38:48 Lease Expires . . . . . . . . . . : dimanche 29 novembre 2009 07:33:04 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DHCPv6 IAID . . . . . . . . . . . : 301998655 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-7E-58-EA-00-1A-4D-59-B2-71 DNS Servers . . . . . . . . . . . : 192.168.1.1 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller Physical Address. . . . . . . . . : 00-1A-4D-59-B2-71 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::f598:c3a0:df8d:706e%11(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.0.7(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 234887757 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-7E-58-EA-00-1A-4D-59-B2-71 DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled

  Read the article

• apache name virtual host - two domains and SSL

  - by Tom

  I'm trying to setup Apache(2.2.3) to run two websites with SSL using both different domains and IP addresses. Both websites run fine on port 80 but when I tried to enable SSL for website2 I get a ssl_error_bad_cert_domain error; website2 picks up the SSL cert for website1. Here is my setup in httpd.conf: # Website1 NameVirtualHost 192.168.10.1:80 <VirtualHost 192.168.10.1:80> DocumentRoot /var/www/html ServerName www.website1.org </VirtualHost> NameVirtualHost 192.168.10.1:443 <VirtualHost 192.168.10.1:443> SSLEngine On SSLCertificateFile conf/ssl/website1.cer SSLCertificateKeyFile conf/ssl/website1.key </VirtualHost> # Website2 NameVirtualHost 192.168.10.2:80 <VirtualHost 192.168.10.2:80> DocumentRoot /var/www/html/chart ServerName www.website2.org </VirtualHost> NameVirtualHost 192.168.10.2:443 <VirtualHost 192.168.10.2:443> SSLEngine On SSLCertificateFile conf/ssl/website2.cer SSLCertificateKeyFile conf/ssl/website2.key </VirtualHost> Update: In answer to Shane (this wouldn't fit in comment box) here is the output from apachectl -S: VirtualHost configuration: 192.168.10.2:80 is a NameVirtualHost default server www.website2.org (/etc/httpd/conf/httpd.conf:1033) port 80 namevhost www.website2.org (/etc/httpd/conf/httpd.conf:1033) 192.168.10.2:443 is a NameVirtualHost default server bogus_host_without_reverse_dns (/etc/httpd/conf/httpd.conf:1040) port 443 namevhost bogus_host_without_reverse_dns (/etc/httpd/conf/httpd.conf:1040) 192.168.10.1:80 is a NameVirtualHost default server www.website1.org (/etc/httpd/conf/httpd.conf:1017) port 80 namevhost www.website1.org (/etc/httpd/conf/httpd.conf:1017) 192.168.10.1:443 is a NameVirtualHost default server bogus_host_without_reverse_dns (/etc/httpd/conf/httpd.conf:1024) port 443 namevhost bogus_host_without_reverse_dns (/etc/httpd/conf/httpd.conf:1024) wildcard NameVirtualHosts and _default_ servers: _default_:443 192.168.10.1 (/etc/httpd/conf.d/ssl.conf:81) Syntax OK

  Read the article

• Problems with X11GraphicsDevice on Suse 11

  - by Daniel

  Hi, On servers running Suse 11 I'm experiencing hangups in sun.awt.X11GraphicsDevice.getDoubleBufferVisuals(Native Method) when connecting via Citrix (and setting DISPLAY to localhost:11.0). Running exactly the same code in exactly the same environment, excepth through Exceed (with DISPLAY set to my workstation's IP) it runs like clockwork. The error is not intermittent, it happens every time Reinstalling the OS does not help Can not reproduce it on Suse 10 This is what the main thread stack looks like: [junit] "main" prio=10 tid=0x0000000040112000 nid=0x6acc runnable [0x00002b9f909ae000] [junit] java.lang.Thread.State: RUNNABLE [junit] at sun.awt.X11GraphicsDevice.getDoubleBufferVisuals(Native Method) [junit] at sun.awt.X11GraphicsDevice.makeDefaultConfiguration(X11GraphicsDevice.java:208) [junit] at sun.awt.X11GraphicsDevice.getDefaultConfiguration(X11GraphicsDevice.java:182) [junit] - locked <0x00002b9fed6b8e70 (a java.lang.Object) [junit] at sun.awt.X11.XToolkit.(XToolkit.java:92) [junit] at java.lang.Class.forName0(Native Method) [junit] at java.lang.Class.forName(Class.java:169) [junit] at java.awt.Toolkit$2.run(Toolkit.java:834) [junit] at java.security.AccessController.doPrivileged(Native Method) [junit] at java.awt.Toolkit.getDefaultToolkit(Toolkit.java:826) [junit] - locked <0x00002b9f94b8ada0 (a java.lang.Class for java.awt.Toolkit) [junit] at java.awt.Toolkit.getEventQueue(Toolkit.java:1676) [junit] at java.awt.EventQueue.invokeLater(EventQueue.java:954) [junit] at javax.swing.SwingUtilities.invokeLater(SwingUtilities.java:1264) ... Has anyone experienced something similar? Could this be a problem in Suse 11's display handling? I'm thankful for any input at this point - I'm fresh out of ideas :)

  Read the article

• Network Explorer Intermittently Fails to Display all Computers in Work Group

  - by graf_ignotiev

  I run a small computer lab of 10 computers and occasionally, when using the network explorer (a.k.a Network Browser) some or all of the remote computers will fail to appear. If I try to access a remote computer by its name I get an unspecified error (code 0x80004005), but I am still able to access it with the computer's IP address. The strangest part is that the problem will inexplicably go away after waiting awhile. Each computer is running Windows 7 x64 Enterprise and has identical hardware, software and configuration. They are all on the same subnet and in the same workgroup. I've spent days researching the problem and have tried the following solutions: Updated the BIOS, chipset and network adapter drivers Changed Power Settings in Network Adapter Properties so that the computer will not turn it off Disabled the Computer Browser service Changed the DHCP node type to broadcast Reviewed the Event Viewer logs Steps 3 and 4 have seemed to help the problem a little bit, but not completely. I'm beginning to suspect that the problem might lie with our router which is a ZyXEL ZyWALL 2WG, as the packets sent by Network Discovery may not be returning in time, but I wanted to get some perspective in the issue before I went any further.

  Read the article

• Internet doesn't work when enable local network

  - by rakesh yadav

  We have the following network setup: A) Router IP 192.168.51.49 B) Windows Server 2008 R2 with dual NIC: Lan A) WAN interface (192.168.51.50) ( Used for internet) Lan B) LAN interface (192.168.30.228) ( used for local connectivity ) When I keep both LAN Enabled than my internet doesn't work, but if I disable my local LAN then internet works fine. How can I resolve this issue? Do I need to do routing on my server Please find the below attached route print result C:\Users\Administrator>route print =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.51.49 192.168.51.50 276 0.0.0.0 0.0.0.0 192.168.30.227 192.168.30.228 266 192.168.30.224 255.255.255.240 On-link 192.168.30.228 266 192.168.30.228 255.255.255.255 On-link 192.168.30.228 266 192.168.30.239 255.255.255.255 On-link 192.168.30.228 266 192.168.51.48 255.255.255.240 On-link 192.168.51.50 276 192.168.51.50 255.255.255.255 On-link 192.168.51.50 276 192.168.51.63 255.255.255.255 On-link 192.168.51.50 276 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 202.56.230.5 255.255.255.255 192.168.51.49 192.168.51.50 21 202.56.230.6 255.255.255.255 192.168.51.49 192.168.51.50 21 192.168.26.124 255.255.255.255 192.168.51.49 192.168.51.50 21 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.51.50 276 224.0.0.0 240.0.0.0 On-link 192.168.30.228 266 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.51.50 276 255.255.255.255 255.255.255.255 On-link 192.168.30.228 266 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 192.168.30.227 Default 0.0.0.0 0.0.0.0 192.168.51.49 Default ===========================================================================

  Read the article

• Installation of Active Directory on separate VM from DNS does not entierly work - not sure why

  - by René Kåbis

  Not sure what I am doing wrong here. I have a moderately midrange server (16 cores, 2Ghz, 32GB ECC REG RAM, 6TB storage, nothing too extreme) where I am running Hyper-V (Server 2012 R2 Enterprise) in order to provision virtual machines. So why an AD separate from DNS? I want redundancy. I want to be able to move VMs and back them up individually and not have too many services on any one VM. I have already provisioned a VM with DNS, and have set it up right -- essentially, I have: Set up Static IP’s for everyone involved. Installed the DNS service on the DNS VM. Created a forward lookup zone and a reverse lookup zone (primary zone) xyz.ca Configured the zones to use nonsecure and secure dynamic updates (i will change this to secure later after the domain controller is online). Created a A record for the DC in the forward lookup zone (and a reverse ptr) Changed DC’s DNS server (network settings) to the new DNS server. Checked that I can ping the dns server from the new DC by hostname. When I went ahead and did a DCpromo on the DC, and un-cheked the “install DNS” option, everything seemed to go well (no error messages), but I saw no changes on the DNS server whatsoever (no additional settings). Plus, the DNS server seems to be unable to join the domain, as it claims that the domain is not discoverable. As a final note, I do run Symantec Endpoint Protection, which includes a firewall and most settings set as default. I have not yet tried turning this off, but my experience has been that if a service would open up a port on a Windows firewall, it would do the same through Symantec. There is pretty tight integration these days with corporate-class AV and Windows. I have a template vhdx fully set up (just short of any special roles and features) that I can use to replace the current AD VM with, so doing this all over again is not too much skin off of my nose.

  Read the article

• location of index.html CentOS 6

  - by user2118559

  Based on this http://www.servermom.com/how-to-add-new-site-into-your-apache-based-centos-server/454/ tutorial installed Apache-based CentOS Server I use putty.exe as editor vi /etc/httpd/conf/httpd.conf at very bottom modified to <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /var/www/fikitipis.com/public_html ServerName www.fikitipis.com ServerAlias fikitipis.com ErrorLog /var/www/fikitipis.com/error.log CustomLog /var/www/fikitipis.com/requests.log common </VirtualHost> So expect that index is at /var/www/fikitipis.com/public_html When in browser type ip address of server, see Apache 2 Test Page powered by CentOS and so on You may now add content to the directory /var/www/html/ Then [root@vps ~]# ls /var/www/ see cgi-bin domain.com error fikitipis.com html icons Checking content of directories ls /var/www/domain.com/public_html, ls /var/www/fikitipis.com/public_html, /var/www/html/ are empty Where is index.html? Did touch /var/www/fikitipis.com/public_html/index1.html then vi /var/www/fikitipis.com/public_html/index1.html, typed a, then wrote some text in file, then Escape and shift+zz. And in browser http://111.111.11.111/index1.html and see what I had wrote. So until now seems that all works

  Read the article

• How to set up a serial connection to a Windows 7 computer

  - by oli_arborum

  I need to set up a "dial in" connection to a Windows 7 (Ultimate) computer via a serial null-modem cable to be able to connect from a Windows XP client to that computer and exchange data over IP. Question 1: How do I do that? I did neither find the information via Google nor in the MSDN. Seems like no one tried ever before... ;-) I already managed to install a legacy modem device called "Communications cable between two computers" and found the menu entry "New Incoming Connection..." in Network and Internet Network Connections. When I finish this wizard I get the message that the "Routing and Remote Access service" cannot be started. In the event viewer I see the following error messages: "The currently configured authentication provider failed to load and initialize successfully. The requested name is valid, but no data of the requested type was found." (Source: RemoteAccess, EventID: 20152) "The Routing and Remote Access service terminated with service-specific error The requested name is valid, but no data of the requested type was found." (Source: Service Control Manager, EventID: 7024) The Windows 7 installation is "naked", i.e. no additional software or services are installed. Question 2: Am I on the right path to set up the connection? Question 3: How can I get the Routing and Remote Access service running?

  Read the article

• Plesk wildcard subdomain not working

  - by avdgaag

  I'm trying to set up a wildcard subdomain on my VPS. Ultimately I want to end up with this: main site: my.domain.tld subdomain: sub1.my.domain.tld - should end up serving my.domain.tld/sub1 I am using plesk 8.6. I have created a DNS A record pointing at my VPS' IP. I have then restarted the DNS server and waited up to 24 hours. But trying ping sub1.my.domain.tld results in an unknown host error. So I know there's more stuff involved, configuring apache etc. But so far, I cannot even get the subdomain working at all, let alone serve up the right content. I have also tried a CNAME record, to no effect. I have also tried creating a regular subdomain with a fixed name, which also does not work. Pre-configured subdomains DO work, like ftp.my.domain.tld or mail.my.domain.tld. I am clearly missing something here, but my hosting provider charges a small fortune for any support request not involving hardware physically burning down, so I'm hesitant to ask them. Any ideas?

  Read the article

• Which ports are needed for NTLM (Windows Authentication) to connect to SQL Server?

  - by Adam Bellaire

  I've got SQL server running on a machine which is not in a domain, and which is not operating in mixed mode (it's running with "Windows Authentication"). I'm trying to connect to it from a Linux web server running freetds via TCP/IP, using NTLM to authenticate. The firewall on the SQL server is very restrictive. 1433 is open to my web server, but I'm getting conflicting information from the web on what additional ports (TCP/UDP) are needed for NTLM to succeed. It is currently fail; I can talk on 1433 to request NTLM, but the actual authentication always fails. One source says 137, 138, 139, but those are just the NetBIOS ports. Do I really need those? Another source says 135. Still others seem to say 1434... I can't make heads or tails of it. Dammit Jim, I'm a programmer, not a network administrator! EDIT: The exact error message: Msg 18452, Level 14, State 1, Server , Line 0 Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection. Msg 20002, Level 9, State -1, Server OpenClient, Line -1 Adaptive Server connection failed I am attempting to connect with a remote machine username, i.e. 'servername\username'. Some sources recommend that I set up mirrored accounts on the local and remote machines, but the local machine is running Linux, not IIS under Windows.

  Read the article

• Websites down EC2 inaccessible via SSH CPU utilisation 100% last few hours - what should I do?

  - by fuzzybee

  I have multiple websites hosted on 1 single EC2 instance. 1 website "abc" were down for a few hours, sometimes threw database connection error and sometimes just took too long to respond. 1 website "def" were incredibly slow but still up and running the rest of the websites had the same symptoms has "abc" I can afford 15 min or less down time for "def". Should I then (in AWS console) reboot my instance or create an AMI image from my instance and launch it and associate my elastic IP to the new instance or "launch more like this" Background on what may have happened to my ec2 The last time I made changes for 21 hours ago. A cronjob to create snapshots ran around 19 hours ago and it has been running for a long time. Google Analytics shows traffic to my websites such as kidlander.sg has been nothing exceptional. Is there any other actions I should take or better options I could have? (I have already contacted AWS support but their turnaround is 12 hours so I appreciate all the help I could get) Update I got everything back up and running and CPU utilisation back to normal, around 30%. There is 1 difference between "def" and "abc" as well as my other websites "def"'s database is hosted on RDS "abc"'s database is hosted on an EC2 instance (different from my web server instance) configured by myself Nevertheless, I checked the EC2 instance I'm using as MySQL server yesterday and it was absolutely fine during the incident low CPU ultilisation I could log in using linux command line

  Read the article

• Two hosted servers, one public - VPN?

  - by Aquitaine

  Hello there, Web developer here who has to occasionally wear a system & network admin hat (small company). We currently have a single hosted server running Windows Server 2003 that runs both our web server (IIS/Coldfusion) and our database server (SQL Server 2008). We lock down the SQL server by allowing only specific IPs to connect to it. Not ideal but it's worked thus far. We're moving up to two distinct servers and I want to take the opportunity to 'get things right' and make only the web server face the public. What I need to be able to do is to allow only a handful of people to connect to the database server. Rather than using an IP allow list, I'd prefer to use a VPN to let people through so that access is based on the user and not simply the user's location. I'm leaning toward something like OpenVPN, just so I can stick with Server 2008 Web edition. Do I: Use the web server as a VPN server and set up the database server to only accept connections from the web server? Is there an extra step required to make connections to, say, db.mycompany.com route through the VPN rather than through a different connection? I'm ignorant of this part of network infrastructure stuff. Or, Set up a VPN server on the database server as the only public-facing server connection so that there aren't any routing issues to deal with? I know this is Network 101 stuff but I thought I'd ask before just blundering through it since it could affect the company a bit. Thanks very much!

  Read the article

• How do I connect a 2008 server to a 2003 server active directory?

  - by Matt

  Our DC is running Windows Server 2003. I've just set up Windows Server 2008 and have terminal server running on it. When setting the terminal server permissions, it was able to allow a group name that was read from the domain. In the DC the new terminal server shows up as a computer in the domain. I can also log in as a user within the domain even though that user doesn't exist locally on the new server. However, when I go to set sharing permissions on the new machine it doesn't show my domain as a location. Instead it is only looking at location "machinename" and not allowing domain to be seen or added. Is there something I'm missing? Ok, lots of errors in the event log. We have this: The winlogon notification subscriber is taking long time to handle the notification event (Logon). Followed by this: The winlogon notification subscriber took 121 second(s) to handle the notification event (Logon). Followed by: The processing of Group Policy failed because of lack of network connectivity to a domain controller. This may be a transient condition. A success message would be generated once the machine gets connected to the domain controller and Group Policy has succesfully processed. If you do not see a success message for several hours, then contact your administrator. I think this might be the same problem I'm having http://serverfault.com/questions/24420/primary-domain-controller-slow Solved. The issue was that I had changed from DHCP to static and put the wrong DNS server IP in. i.e. firewall instead of DC/DNS server.

  Read the article

• Checkpoint VPN-1 R60 and Windows 7 64 Bit Client

  - by Mohit

  As per my knowledge of checkpoint VPN-1. My company is using checkpoint VPN-1 R 60 ( I guess as I dont know how to check server version) Firewall(VPN Server). Now the problem is that I installed Windows 7 64 bit. But, after my research I found that there are not even one client (SecuRemote/SecuClient) for Win7 64 bit, when Firewall or server is R60. I thought of some open source solutions. Can you guys please suggest me some with the configuration required. As of now, I know the IP of the server. I know my username and password using which I connect and that is not my domain password. that i can confirm to you guys. I am not a network guy. I am more of a developer. But, I need some help in this.So, let me know if I can provide you more details. Please please i need urgent help on this.

  Read the article

• Reason for perpetual dynamic DNS updates?

  - by mad_vs

  I'm using dynamic DNS (the "adult" version from RFC 2136, not à la DynDNS), and for a while now I've been seeing my laptops with MacOS 10.6.x churning out updates about every 10 seconds. And seemingly redundant updates at that, as the IP is more or less stable (consumer broadband). I don't remember seeing that frequency in the (distant...) past. The lowest time-to-live that MacOS pushes on the entries is 2 minutes, so I have no clue what's going on. ... Jan 12 13:17:18 lambda named[18683]: info: client 84.208.X.X#48715: updating zone 'dynamic.foldr.org/IN': deleting rrset at 'rCosinus._afpovertcp._tcp.dynamic.foldr.org' SRV Jan 12 13:17:18 lambda named[18683]: info: client 84.208.X.X#48715: updating zone 'dynamic.foldr.org/IN': adding an RR at 'rCosinus._afpovertcp._tcp.dynamic.foldr.org' SRV Jan 12 13:17:26 lambda named[18683]: info: client 84.208.X.X#48715: updating zone 'dynamic.foldr.org/IN': deleting rrset at 'rcosinus.dynamic.foldr.org' AAAA ... Additionally, I can't find out what triggers the updates on the laptop-side. Is this a known problem, and how would I go about debugging it? One of the machines is freshly purchased and installed. The only "major" change was installation of the Miredo client for IPv6/Teredo, but even disabling it didn't make a change (except that AAAA records are no longer published).

  Read the article

• Why am I seeing MailSlot Browse messages on unrouted ports of my Linux box?

  - by nmichaels

  I have a Linux box (Debian squeeze) with several NICs. The ones of interest are: eth3 - my main link to the network (dhcp on 10.20.30.0/24) eth0 - the first connection to my test network (static: 192.168.1.2) eth4 - the second connection to my test network (static: 192.168.1.1) My routing table looks like this: $ sudo route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.20.30.0 * 255.255.255.0 U 0 0 0 eth3 default 10.20.30.254 0.0.0.0 UG 0 0 0 eth3 I have the 2 test net ports connected to each other with a crossover cable and an instance of wireshark running on each port. Every once in a while, I'll see a packet like the following show up. Who could be doing this, and how do I convince them to stop? I do have Samba running on the machine (for a cifs mount) but don't see why it would be sending packets out to unrouted ports. I had a Windows VM running in VMWare Client and thought that might be causing it, but it still happens without it. What I want is totally silent interfaces so I can run some tests with Scapy over them.

  Read the article

• High latency issue for web service call from amazon aws ec2 to local server

  - by SibzTer

  We have a legacy web application that is running in our data center on premises located in Houston. We have a developed a new .net 4 based web application in order to provide new features to customers. The new web application is hosted in amazon aws ec2 environment (N. Virginia region us-east-1b zone). In order to get seamlessly integrate with the legacy application the new web application makes web service calls to retrieve data. We are seeing an unusually high latency time in the order of 5+ seconds for these web service calls. The exact same web service call returns in less than a second on our local PCs (which makes sense given physical proximity to the actual server). The weird part is that we have developers in California who also have the same milliseconds response time. We are testing the web service response using third party tools such as SoapUI, Google Chrome extensions such as Advanced REST Client, Postman REST Client, etc. As if this wasnt weird enough, we have noticed the same low latency from certain other ec2 instances while testing which are in the same region and availability zone as well. If we experienced the high latency consistently from all the ec2 instances I could understand. But there is something else going on. Comparing the various stats and results between the low latency and high latency ec2 servers do not show any significant differences: ping (constant 40ms), tracert, winmtr, etc. We have instances that are in the VPC as well. So I tried both the public and private IP address of the web service host server and that didnt make a difference either for the above results. We need to resolve this latency issue as this is causing the resulting web pages to load very slowly (almost 15+ seconds which is simply unacceptable). The ec2 instances have Windows Server Datacenter 64 bit. Let me know if there is any other infor I can provide to help diagnose this.

  Read the article

• Why should one have a secondary DNS server?

  - by Sam Levin

  I'm very confused. I basically understand how DNS works. Here's an example that helps illustrate what I'm having trouble understanding. Right now, I run a small web-server. I use my provider's DNS manager, so I don't have a DNS server hosted on the machine. Let's say for a second, that I don't use my host's DNS, and I decide to set up a DNS server on my server. Hypothetical scenario: my server (entire) server goes down - DNS included. Why do I need backup DNS? If the server is down, who cares if the DNS server is down too, considering that even if I had DNS up (it wasn't on the crashed server), it wouldn't be able to forward requests anyway since the server would be down? Is the point of having secondary DNS, to be able to change the IP addresses that your DNS server points to, so if your webserver was down, you could redirect traffic to a backup? How would you switch to the secondary provider, in the event that your main DNS provider becomes unavailable? Is a backup DNS system basically up all the time? How is it configured? Is it just an exact clone of the DNS server you would have on your server? Do they run simultaneously? Hopefully someone can see what I'm hung up on, and provide some guidance. Thanks

  Read the article

• Sync clock on Windows XP machine to external (non-domain, non-workgroup) Windows Server 2008 R2 machine

  - by Eric

  I have two machines and I'd like their clocks to be in sync for various reasons. Machine 1 is an XP machine located in the office. Machine 2 is a VPS hosted by a third party running Windows Server 2008 R2. These machines are not in any kind of workgroup or on a domain together. They are completely separate machines. Machine 2 is currently syncing once a week to time.windows.com. The clock on Machine 2 does seem to wander a bit within that week interval. What I would like to do is have Machine 1 set its clock based on the clock of Machine 2. I have tried configuring w32tm on the XP machine. This is what I used for configuration: w32tm /config /syncfromflags:manual /manualpeerlist:"<ip address of machine 2>" However, whenever I issue the /resync command I get "The computer did not resync because no time data was available". I have made sure to start the windows time service on machine 2, and I have added firewall exceptions for UDP port 123. Is there something I need to configure on Machine 2 (other than just starting the time service) in order to get it to respond? Edit: I have also run w32tm /config /reliable:YES /update on Machine 2. I am still getting "The computer did not resync because no time data was available". Is there something else I'm missing?

  Read the article

• openvpn& iptables -- portforwarding and gateway

  - by Smith.Lai

  The problem is similar to this scenario: iptables rule still take effect after deleted Scenario: There are several clients(C1~C10) providing some services, such as SSH,HTTP..... The clients are actually a personal computer behind NAT. Their IP might be 192.168.0.x For easily access these machines through internet, I built a OpenVPN server(S1). All the C1~C10 connect to S1 with VPN address 10.8.0.x If A user(U1) wanna access C1 SSH through internet, he can connect to S1 with port "55555", and S1 port forward 55555 to 10.8.0.6:22 echo 1 /proc/sys/net/ipv4/ip_forward iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 55555 -j DNAT --to-destination 10.8.0.6:22 It works well until I mark the following in the openvpn server.conf: I marked this because I think this will make all connection go through S1 ;push "redirect-gateway" |-------(NAT)--------| (C1)--| (INTERNET)----(U1) |-----(VPN)----(S1)--| The C1~C10 have their own path to access internet resource through NAT . The server loading would be heavy if all C1~C10 connection go through S1 (for example, C1 is sending data to C2, or C1 is downloading data from a FTP site). Is there a way to solve this quandary?

  Read the article

• How have multiple web servers and IPs on the same physical network

  - by jsigned

  I do web development out of a small office and need to have multiple physical and virtual servers that can be accessed from the internet. I also have a number of devices (computers, laptops, tablets, printers, etc) that need connections as well. I have gotten a subnet of 8 IP's from my ISP and while that is adequate for the web servers its far too small for everything that needs access to the network. My router is an ASUS RT-N16 running DD-WRT. I'm just smart enough about this routing topic to be dangerous, think 2 year old with a magic marker. I would like to keep my internal network NAT'ed on the 192.168.x.x network and route the 68.69.x.x 255.255.255.248 traffic directly to the servers. The physical network consists of the 4 port DD-WRT router and an unmanaged gig switch. I have a fiber connection to the office that works as an Ethernet port. In other words I can plug my laptop directly into it and have access to the internet. There is no login or password and the router is setup to get DHCP from the ISP, and to provide DHCP addresses for the internal network. What I've done so far is google and try different configurations with little success. In the end I decided I didn't even know how to ask the questions needed. My questions are: Is this the best way to configure the network? How do you do it? VLANs? Multiple routers? I've never had to configure a router using anything more than the GUI so if this is command line stuff be gentle.

  Read the article

• SharePoint Business Connectivity Services (BCS) Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'

  - by g18c

  I am running SharePoint 2010 with SQL 2012, I am trying to get Business Connectivity Services (BCS) running but I am facing a double-hope authentication issue. Everytime I try to connect to the external BCS list created in SharePoint designer, I get the error Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. In the event viewer on the SQL server I see a login failure for an anonymous user from the SP server IP address. Background information below: I have enabled Kerberos under SharePoint Central admin. I have the following AD domain accounts: SP_Farm - main website pool SP_Services - for SharePoint services (including BCS) SQL_Engine - SQL database engine I then created the following with SetSPN: SetSPN -S http/intranet mydomain\SP_Farm SetSPN -S http/intranet.mydomain.local mydomain\SP_Farm SetSPN -S SPSvc/SPS mydomain\SP_Farm SetSPN -S MSSQLSvc/SQL1 mydomain\SQL_DatabaseEngine SetSPN -S MSSQLSvc/SQL1.mydomain.local mydomain\SQL_DatabaseEngine SetSPN -S MSSQLSvc/SQL1:1433 mydomain\SQL_DatabaseEngine SetSPN -S MSSQLSvc/SQL1.mydomain.local:1433 mydomain\SQL_DatabaseEngine I then delegated the AD accounts for any authentication protocol to the following: SP_Farm - SP_Farm (http service type, intranet) SP_Farm - SQL_DatabaseEngine (MSSQLSvc, sql1) SP_Service - SP_Service (SPSvc) SP_Service - SQL_DatabaseEngine (MSSQLSvc, sql1) I have also checked the WFE is being logged on to with Kerberos, with the WFE server event log showing event ID 4624 with Kerberos authentication, this is OK. The SQL is also showing connections authenticated as Kerberos from the WFE with the following query: Select s.session_id, s.login_name, s.host_name, c.auth_scheme from sys.dm_exec_connections c inner join sys.dm_exec_sessions s on c.session_id = s.session_id Despite the above, credentials are not passed from the client through the SharePoint server to the SQL server, only the anonymous account is used. I get the following error in the WFE server for 'BusinessData' ID 8080: Could not open connection using 'data source=sql1.mydomain.local;initial catalog=MSCRM;integrated security=SSPI;pooling=true;persist security info=false' in App Domain '/LM/W3SVC/1848937658/ROOT-1-129922939694071446'. The full exception text is: Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. If I set a username and password with the Secure Store Service and set the external list to use the impersonated credentials, the list works. Any ideas what I have missed and what can be tried next?

  Read the article

• Vista WHS Client stopped resolving local names

  - by andrewcr

  I’m running Windows Home Server PP2 in my home, with 3 client computers: two XP and one Vista. I have a router that provides my local DHCP and the server has a static IP address. The other day the Vista machine hung, and on reboot stopped resolving local names. It will show the green home server client icon in the system tray, but if I attempt to log in to the console, I get a “This computer cannot connect to your home server” message. If I ping the server name from the command line, it does not resolve, and gives a “could not find host” message. Oddly enough, if I browse the network, I can see the server, but double clicking on it fails. The other machines on the local network have no problems seeing the server, and the Vista machine has no problems resolving names from the internet, it just can’t see any local machines. I’m aware that I can work around this by adding entries to my HOSTS file (it does work), but I’d like this to work the way it’s “supposed” to. I’m an experienced computer user and developer, but not a networking whiz. Can anyone tell me how local name resolution is supposed to work in my environment and/or suggest ways to troubleshoot this? Thanks, Andy

  Read the article

• Port Forwarding(?) TD-W8961nd

  - by rich

  I have a bit of a weird internet setup. I am connected via a decent WiFi connection (from work) which I pick up using a Buffalo Airstation Wireless-G box. This simply picks up the signal and gives me 4 ethernet ports to connect to. That's all fine and works as it should. I also have a TP LINK TD-W8961nd router which used to be connected to the Airstation via an ethernet cable so I could essentially have WiFi access in my house. To cut a long story short I can't remember how the hell I got it to work and I can't find the notes I scribbled down on how to do it. I'm pretty sure I need to tell the router what ip to pick up the internet connection from and have the local wifi as a seperate network. How the hell I do that I have no idea right now. Can anyone give me some advice on this? If you need more information ask and I will be able to do so. Cheers in advance. edit I'm in work at the moment so I can't give 100% details but I will be able to later on.

  Read the article

• Amazon VPC NAT not working

  - by rpkelly

  I'm trying to create a NAT instance for my VPC to allow instances on private subnets connect to the internet (most importantly, S3). I tried following the instructions here: http://docs.amazonwebservices.com/AmazonVPC/2011-07-15/UserGuide/index.html?VPC_NAT_Instance.html . Unfortunately, the instances in the private subnet (call it 10.10.2.0/24) cannot reach the internet. I have done the following: Create a NAT instance (Amazon's ami-vpc-nat-1.0.0-beta.i386-ebs (ami-d8699bb1)) in public subnet (call it 10.10.1.0/24). Changed "Source / Dest Check" to disabled. Created a new entry in the default routing table (which is used by 10.10.2.0/24) and had it point to the ID of the newly created instance. Associated an Elastic IP address with the NAT instance. Allowed all outbound traffic on the security group of the NAT instance. Ensured that all traffic could pass between the two subnets. I've tried also doing this with an existing instance using iptables, but had no luck. And I have verified that sys.net.ipv4.ip_forward is 1, just in case anyone was wondering. And I still have no internet connectivity from the instances on 10.10.2.0/24. Does anyone have any suggestions?

  Read the article

< Previous Page | 422 423 424 425 426 427 428 429 430 431 432 433  | Next Page >