Search Results

Search found 22576 results on 904 pages for 'microsoft dns'.

Page 426/904 | < Previous Page | 422 423 424 425 426 427 428 429 430 431 432 433  | Next Page >

  • SQL Saturday 43 in Redmond

    - by AjarnMark
    I attended my first SQLSaturday a couple of days ago, SQLSaturday #43 in Redmond (at Microsoft).  I got there really early, primarily because I forgot how fast I can get there from my home when nobody else is on the road.  On a weekday in rush hour traffic, that would have taken two hours to get there.  I gave myself 90 minutes, and actually got there in about 45.  Crazy! I made the mistake of going to the main Microsoft campus, but that’s not where the event was being held.  Instead it was in a big Microsoft conference center on the other side of the highway.  Fortunately, I had the address with me and quickly realized my mistake.  When I got back on track, I noticed that there were bright yellow signs out on the street corner that looked like they said they were for SOL Saturday, which actually was appropriate since it was the sunniest day around here in a long time. Since I was there so early, the registration was just getting setup, so I found Greg Larsen who was coordinating things and offered to help.  He put me to work with a group of people organizing the pre-printed raffle tickets and stuffing swag bags. I had never been to a SQLSaturday before this one, so I wasn’t exactly sure what to expect even though I have read about a few on some blogs.  It makes sense that each one will be a little bit different since they are almost completely volunteer driven, and the whole concept is still in its early stages.  I have been to the PASS Summit for the last several years, and was hoping for a smaller version of that.  Now, it’s not really fair to compare one free day of training run entirely by volunteers with a multi-day, $1,000+ event put on under the direction of a professional event management company.  But there are some parallels. At this SQLSaturday, there was no opening general session, just coffee and pastries in the common area / expo hallway and straight into the first group of sessions.  I don’t know if that was because there was no single room large enough to hold everyone, or for other reasons.  This worked out okay, but the organization guy in me would have preferred to have even a 15 minute welcome message from the organizers with a little overview of the day.  Even something as simple as, “Thanks to persons X, Y, and Z for helping put this together…Sessions will start in 20 minutes and are all in rooms down this hallway…the bathrooms are on the other side of the conference center…lunch today is pizza and we would like to thank sponsor Q for providing it.”  It doesn’t need to be much, certainly not a full-blown Keynote like at the PASS Summit, but something to use as a rallying point to pull everyone together and get the day off to an official start would be nice.  Again, there may have been logistical reasons why that was not feasible here.  I’m just putting out my thoughts for other SQLSaturday coordinators to consider. The event overall was great.  I believe that there were over 300 in attendance, and everything seemed to run smoothly.  At least from an attendee’s point of view where there was plenty of muffins in the morning and pizza in the afternoon, with plenty of pop to drink.  And hey, if you’ve got the food and drink covered, a lot of other stuff could go wrong and people will be very forgiving.  But as I said, everything appeared to run pretty smoothly, at least until Buck Woody showed up in his Oracle shirt.  Other than that, the volunteers did a great job! I was a little surprised by how few people in my own backyard that I know.  It makes sense if you really think about it, given how many companies must be using SQL Server around here.  I guess I just got spoiled coming into the PASS Summit with a few contacts that I already knew would be there.  Perhaps I have been spending too much time with too few people at the Summits and I need to step out and meet more folks.  Of course, it also is different since the Summit is the big national event and a number of the folks I know are spread out across the country, so the Summit is the only time we’re all in the same place at the same time.  I did make a few new contacts at SQLSaturday, and bumped into a couple of people that I knew (and a couple others that I only knew from Twitter, and didn’t even realize that they were here in the area). Other than the sheer entertainment value of Buck Woody’s session, the one that was probably the greatest value for me was a quick introduction to PowerShell.  I have not done anything with it yet, but I think it will be a good tool to use to implement my plans for automated database recovery testing.  I saw just enough at the session to take away some of the intimidation factor, and I am getting ready to jump in and see what I can put together in the next few weeks.  And that right there made the investment worthwhile.  So I encourage you, if you have the opportunity to go to a SQLSaturday event near you, go for it!

    Read the article

  • Cloud Computing Architecture Patterns: Don’t Focus on the Client

    - by BuckWoody
    Normally I try to put topics in the positive in other words "Do this" not "Don't do that". Sometimes its clearer to focus on what *not* to do. Popular development processes often start with screen mockups, or user input descriptions. In a scale-out pattern like Cloud Computing on Windows Azure, that's the wrong place to start. Start with the Data    Instead, I recommend that you start with the data that a process requires. That data might be temporary or persisted, but starting with the data and its requirements helps to define not only the storage engine you need but also drives everything from security to the integrity of the application. For instance, assume the requirements show that the user must enter their phone number, and that this datum is used in a contact management system further down the application chain. For that datum, you can determine what data type you need (U.S. only or International?) the security requirements, whether it needs ACID compliance, how it will be searched, indexed and so on. From one small data point you can extrapolate out your options for storing and processing the data. Here's the interesting part, which begins to break the patterns that we've used for decades: all of the data doesn't have the same requirements. The phone number might be best suited for a list, or an element, or a string, with either BASE or ACID requirements, based on how it is used. That means we don't have to dump everything into XML, an RDBMS, a NoSQL engine, or a flat file exclusively. In fact, one record might use all of those depending on the use-case requirements. Next Is Data Management  With the data defined, we can move on to how to store the data. Again, the requirements now dictate whether we need a full relational calculus or set-based operations, or we can choose another method based on the requirements for the data. And breaking another pattern its OK to store in more than once, in more than one location. We do this all the time for reporting systems and Business Intelligence systems, so this is a pattern we need to think about even for OLTP data. Move to Data Transport How does the data get around? We can use a connection-based method, sending the data along a transport to the storage engine, but in some cases we may want to use a cache, a queue, the Service Bus, or Complex Event Processing. Finally, Data Processing Most RDBMS engines, NoSQL, and certainly Big Data engines not only store data, but can process and manipulate it as well. Its doubtful that you'll calculate that phone number right? Well, if you're the phone company, you most certainly will. And so we see that even once we've chosen the data type, storage and engine, the same element can have different computing requirements based on how it is used. Sure, We Need A Front-End At Some Point Not all data is entered by human hands in fact most data isn't. We don't really need a Graphical User Interface (GUI) we need some way for a GUI to get data into and out of the systems listed earlier.   But when we do need to allow users to enter or examine data, that should be left to the GUI that best fits the device the user has. Ever tried to use an application designed for a web browser on a phone? Or one designed for a tablet on a phone? Its usually quite painful. The siren song of "We'll just write one interface for all devices" is strong, and has beguiled many an unsuspecting architect. But they just don't work out.   Instead, focus on the data, its transport and processing. Create API calls or a message system that allows for resilient transport to the device or interface, and let it do what it does best. References Microsoft Architecture Journal:   http://msdn.microsoft.com/en-us/architecture/bb410935.aspx Patterns and Practices:   http://msdn.microsoft.com/en-us/library/ff921345.aspx Windows Azure iOS, Android, Windows 8 Mobile Devices SDK: http://www.windowsazure.com/en-us/develop/mobile/tutorials/get-started-ios/ Windows Azure Facebook SDK: http://ntotten.com/2013/03/14/using-windows-azure-mobile-services-with-the-facebook-sdk-for-windows-phone/

    Read the article

  • Windows Azure Recipe: Enterprise LOBs

    - by Clint Edmonson
    Enterprises are more and more dependent on their specialized internal Line of Business (LOB) applications than ever before. Naturally, the more software they leverage on-premises, the more infrastructure they need manage. It’s frequently the case that our customers simply can’t scale up their hardware purchases and operational staff as fast as internal demand for software requires. The result is that getting new or enhanced applications in the hands of business users becomes slower and more expensive every day. Being able to quickly deliver applications in a rapidly changing business environment while maintaining high standards of corporate security is a challenge that can be met right now by moving enterprise LOBs out into the cloud and leveraging Azure’s Access Control services. In fact, we’re seeing many of our customers (both large and small) see huge benefits from moving their web based business applications such as corporate help desks, expense tracking, travel portals, timesheets, and more to Windows Azure. Drivers Cost Reduction Time to market Security Solution Here’s a sketch of how many Windows Azure Enterprise LOBs are being architected and deployed: Ingredients Web Role – this will host the core of the application. Each web role is a virtual machine hosting an application written in ASP.NET (or optionally php, or node.js). The number of web roles can be scaled up or down as needed to handle peak and non-peak traffic loads. Many Java based applications are also being deployed to Windows Azure with a little more effort. Database – every modern web application needs to store data. SQL Azure databases look and act exactly like their on-premise siblings but are fault tolerant and have data redundancy built in. Access Control – this service is necessary to establish federated identity between the cloud hosted application and an enterprise’s corporate network. It works in conjunction with a secure token service (STS) that is hosted on-premises to establish the corporate user’s identity and credentials. The source code for an on-premises STS is provided in the Windows Azure training kit and merely needs to be customized for the corporate environment and published on a publicly accessible corporate web site. Once set up, corporate users see a near seamless single sign-on experience. Reporting – businesses live and die by their reports and SQL Azure Reporting, based on SQL Server Reporting 2008 R2, can serve up reports with tables, charts, maps, gauges, and more. These reports can be accessed from the Windows Azure Portal, through a web browser, or directly from applications. Service Bus (optional) – if deep integration with other applications and systems is needed, the service bus is the answer. It enables secure service layer communication between applications hosted behind firewalls in on-premises or partner datacenters and applications hosted inside Windows Azure. The Service Bus provides the ability to securely expose just the information and services that are necessary to create a simpler, more secure architecture than opening up a full blown VPN. Data Sync (optional) – in cases where the data stored in the cloud needs to be shared internally, establishing a secure one-way or two-way data-sync connection between the on-premises and off-premises databases is a perfect option. It can be very granular, allowing us to specify exactly what tables and columns to synchronize, setup filters to sync only a subset of rows, set the conflict resolution policy for two-way sync, and specify how frequently data should be synchronized Training Labs These links point to online Windows Azure training labs where you can learn more about the individual ingredients described above. (Note: The entire Windows Azure Training Kit can also be downloaded for offline use.) Windows Azure (16 labs) Windows Azure is an internet-scale cloud computing and services platform hosted in Microsoft data centers, which provides an operating system and a set of developer services which can be used individually or together. It gives developers the choice to build web applications; applications running on connected devices, PCs, or servers; or hybrid solutions offering the best of both worlds. New or enhanced applications can be built using existing skills with the Visual Studio development environment and the .NET Framework. With its standards-based and interoperable approach, the services platform supports multiple internet protocols, including HTTP, REST, SOAP, and plain XML SQL Azure (7 labs) Microsoft SQL Azure delivers on the Microsoft Data Platform vision of extending the SQL Server capabilities to the cloud as web-based services, enabling you to store structured, semi-structured, and unstructured data. Windows Azure Services (9 labs) As applications collaborate across organizational boundaries, ensuring secure transactions across disparate security domains is crucial but difficult to implement. Windows Azure Services provides hosted authentication and access control using powerful, secure, standards-based infrastructure. See my Windows Azure Resource Guide for more guidance on how to get started, including links web portals, training kits, samples, and blogs related to Windows Azure.

    Read the article

  • Windows Azure Recipe: Software as a Service (SaaS)

    - by Clint Edmonson
    The cloud was tailor built for aspiring companies to create innovative internet based applications and solutions. Whether you’re a garage startup with very little capital or a Fortune 1000 company, the ability to quickly setup, deliver, and iterate on new products is key to capturing market and mind share. And if you can capture that share and go viral, having resiliency and infinite scale at your finger tips is great peace of mind. Drivers Cost avoidance Time to market Scalability Solution Here’s a sketch of how a basic Software as a Service solution might be built out: Ingredients Web Role – this hosts the core web application. Each web role will host an instance of the software and as the user base grows, additional roles can be spun up to meet demand. Access Control – this service is essential to managing user identity. It’s backed by a full blown implementation of Active Directory and allows the definition and management of users, groups, and roles. A pre-built ASP.NET membership provider is included in the training kit to leverage this capability but it’s also flexible enough to be combined with external Identity providers including Windows LiveID, Google, Yahoo!, and Facebook. The provider model provides extensibility to hook into other industry specific identity providers as well. Databases – nearly every modern SaaS application is backed by a relational database for its core operational data. If the solution is sold to organizations, there’s a good chance multi-tenancy will be needed. An emerging best practice for SaaS applications is to stand up separate SQL Azure database instances for each tenant’s proprietary data to ensure isolation from other tenants. Worker Role – this is the best place to handle autonomous background processing such as data aggregation, billing through external services, and other specialized tasks that can be performed asynchronously. Placing these tasks in a worker role frees the web roles to focus completely on user interaction and data input and provides finer grained control over the system’s scalability and throughput. Caching (optional) – as a web site traffic grows caching can be leveraged to keep frequently used read-only, user specific, and application resource data in a high-speed distributed in-memory for faster response times and ultimately higher scalability without spinning up more web and worker roles. It includes a token based security model that works alongside the Access Control service. Blobs (optional) – depending on the nature of the software, users may be creating or uploading large volumes of heterogeneous data such as documents or rich media. Blob storage provides a scalable, resilient way to store terabytes of user data. The storage facilities can also integrate with the Access Control service to ensure users’ data is delivered securely. Training & Examples These links point to online Windows Azure training labs and examples where you can learn more about the individual ingredients described above. (Note: The entire Windows Azure Training Kit can also be downloaded for offline use.) Windows Azure (16 labs) Windows Azure is an internet-scale cloud computing and services platform hosted in Microsoft data centers, which provides an operating system and a set of developer services which can be used individually or together. It gives developers the choice to build web applications; applications running on connected devices, PCs, or servers; or hybrid solutions offering the best of both worlds. New or enhanced applications can be built using existing skills with the Visual Studio development environment and the .NET Framework. With its standards-based and interoperable approach, the services platform supports multiple internet protocols, including HTTP, REST, SOAP, and plain XML SQL Azure (7 labs) Microsoft SQL Azure delivers on the Microsoft Data Platform vision of extending the SQL Server capabilities to the cloud as web-based services, enabling you to store structured, semi-structured, and unstructured data. Windows Azure Services (9 labs) As applications collaborate across organizational boundaries, ensuring secure transactions across disparate security domains is crucial but difficult to implement. Windows Azure Services provides hosted authentication and access control using powerful, secure, standards-based infrastructure. Developing Applications for the Cloud, 2nd Edition (eBook) This book demonstrates how you can create from scratch a multi-tenant, Software as a Service (SaaS) application to run in the cloud using the latest versions of the Windows Azure Platform and tools. The book is intended for any architect, developer, or information technology (IT) professional who designs, builds, or operates applications and services that run on or interact with the cloud. Fabrikam Shipping (SaaS reference application) This is a full end to end sample scenario which demonstrates how to use the Windows Azure platform for exposing an application as a service. We developed this demo just as you would: we had an existing on-premises sample, Fabrikam Shipping, and we wanted to see what it would take to transform it in a full subscription based solution. The demo you find here is the result of that investigation See my Windows Azure Resource Guide for more guidance on how to get started, including more links web portals, training kits, samples, and blogs related to Windows Azure.

    Read the article

  • Row Count Plus Transformation

    As the name suggests we have taken the current Row Count Transform that is provided by Microsoft in the Integration Services toolbox and we have recreated the functionality and extended upon it. There are two things about the current version that we thought could do with cleaning up Lack of a custom UI You have to type the variable name yourself In the Row Count Plus Transformation we solve these issues for you. Another thing we thought was missing is the ability to calculate the time taken between components in the pipeline. An example usage would be that you want to know how many rows flowed between Component A and Component B and how long it took. Again we have solved this issue. Credit must go to Erik Veerman of Solid Quality Learning for the idea behind noting the duration. We were looking at one of his packages and saw that he was doing something very similar but he was using a Script Component as a transformation. Our philosophy is that if you have to write or Copy and Paste the same piece of code more than once then you should be thinking about a custom component and here it is. The Row Count Plus Transformation populates variables with the values returned from; Counting the rows that have flowed through the path Returning the time in seconds between when it first saw a row come down this path and when it saw the final row. It is possible to leave both these boxes blank and the component will still work.   All input columns are passed through the transformation unaltered, you are not permitted to change or add to the inputs or outputs of this component. Optionally you can set the component to fire an event, which happens during the PostExecute phase of the execution. This can be useful to improve visibility of this information, such that it is captured in package logging, or can be used to drive workflow in the case of an error event. Properties Property Data Type Description OutputRowCountVariable String The name of the variable into which the amount of row read will be passed (Optional). OutputDurationVariable String The name of the variable into which the duration in seconds will be passed. (Optional). EventType RowCountPlusTransform.EventType The type of event to fire during post execute, included in which are the row count and duration values. RowCountPlusTransform.EventType Enumeration Name Value Description None 0 Do not fire any event. Information 1 Fire an Information event. Warning 2 Fire a Warning event. Error 3 Fire an Error event. Installation The component is provided as an MSI file which you can download and run to install it. This simply places the files on disk in the correct locations and also installs the assemblies in the Global Assembly Cache as per Microsoft’s recommendations. You may need to restart the SQL Server Integration Services service, as this caches information about what components are installed, as well as restarting any open instances of Business Intelligence Development Studio (BIDS) / Visual Studio that you may be using to build your SSIS packages. For 2005/2008 Only - Finally you will have to add the transformation to the Visual Studio toolbox manually. Right-click the toolbox, and select Choose Items.... Select the SSIS Data Flow Items tab, and then check the Row Count Plus Transformation in the Choose Toolbox Items window. This process has been described in detail in the related FAQ entry for How do I install a task or transform component? We recommend you follow best practice and apply the current Microsoft SQL Server Service pack to your SQL Server servers and workstations, and this component requires a minimum of SQL Server 2005 Service Pack 1. Downloads The Row Number Transformation is available for SQL Server 2005, SQL Server 2008 (includes R2) and SQL Server 2012. Please choose the version to match your SQL Server version, or you can install multiple versions and use them side by side if you have more than one version of SQL Server installed. Row Count Plus Transformation for SQL Server 2005 Row Count Plus Transformation for SQL Server 2008 Row Count Plus Transformation for SQL Server 2012 Version History SQL Server 2012 Version 3.0.0.6 - SQL Server 2012 release. Includes upgrade support for both 2005 and 2008 packages to 2012. (5 Jun 2012) SQL Server 2008 Version 2.0.0.5 - SQL Server 2008 release. (15 Oct 2008) SQL Server 2005 Version 1.1.0.43 - Bug fix for duration. For long running processes the duration second count may have been incorrect. (8 Sep 2006) Version 1.1.0.42 - SP1 Compatibility Testing. Added the ability to raise an event with the count and duration data for easier logging or workflow. (18 Jun 2006) Version 1.0.0.1 - SQL Server 2005 RTM. Made available as general public release. (20 Mar 2006) Screenshot Troubleshooting Make sure you have downloaded the version that matches your version of SQL Server. We offer separate downloads for SQL Server 2005, SQL Server 2008 and SQL Server 2012. If you get an error when you try and use the component along the lines of The component could not be added to the Data Flow task. Please verify that this component is properly installed.  ... The data flow object "Konesans ..." is not installed correctly on this computer, this usually indicates that the internal cache of SSIS components needs to be updated. This is held by the SSIS service, so you need restart the the SQL Server Integration Services service. You can do this from the Services applet in Control Panel or Administrative Tools in Windows. You can also restart the computer if you prefer. You may also need to restart any current instances of Business Intelligence Development Studio (BIDS) / Visual Studio that you may be using to build your SSIS packages. Once installation is complete you need to manually add the task to the toolbox before you will see it and to be able add it to packages - How do I install a task or transform component?

    Read the article

  • Real-world SignalR example, ditching ghetto long polling

    - by Jeff
    One of the highlights of BUILD last week was the announcement that SignalR, a framework for real-time client to server (or cloud, if you will) communication, would be a real supported thing now with the weight of Microsoft behind it. Love the open source flava! If you aren’t familiar with SignalR, watch this BUILD session with PM Damian Edwards and dev David Fowler. Go ahead, I’ll wait. You’ll be in a happy place within the first ten minutes. If you skip to the end, you’ll see that they plan to ship this as a real first version by the end of the year. Insert slow clap here. Writing a few lines of code to move around a box from one browser to the next is a way cool demo, but how about something real-world? When learning new things, I find it difficult to be abstract, and I like real stuff. So I thought about what was in my tool box and the decided to port my crappy long-polling “there are new posts” feature of POP Forums to use SignalR. A few versions back, I added a feature where a button would light up while you were pecking out a reply if someone else made a post in the interim. It kind of saves you from that awkward moment where someone else posts some snark before you. While I was proud of the feature, I hated the implementation. When you clicked the reply button, it started polling an MVC URL asking if the last post you had matched the last one the server, and it did it every second and a half until you either replied or the server told you there was a new post, at which point it would display that button. The code was not glam: // in the reply setup PopForums.replyInterval = setInterval("PopForums.pollForNewPosts(" + topicID + ")", 1500); // called from the reply setup and the handler that fetches more posts PopForums.pollForNewPosts = function (topicID) { $.ajax({ url: PopForums.areaPath + "/Forum/IsLastPostInTopic/" + topicID, type: "GET", dataType: "text", data: "lastPostID=" + PopForums.currentTopicState.lastVisiblePost, success: function (result) { var lastPostLoaded = result.toLowerCase() == "true"; if (lastPostLoaded) { $("#MorePostsBeforeReplyButton").css("visibility", "hidden"); } else { $("#MorePostsBeforeReplyButton").css("visibility", "visible"); clearInterval(PopForums.replyInterval); } }, error: function () { } }); }; What’s going on here is the creation of an interval timer to keep calling the server and bugging it about new posts, and setting the visibility of a button appropriately. It looks like this if you’re monitoring requests in FireBug: Gross. The SignalR approach was to call a message broker when a reply was made, and have that broker call back to the listening clients, via a SingalR hub, to let them know about the new post. It seemed weird at first, but the server-side hub’s only method is to add the caller to a group, so new post notifications only go to callers viewing the topic where a new post was made. Beyond that, it’s important to remember that the hub is also the means to calling methods at the client end. Starting at the server side, here’s the hub: using Microsoft.AspNet.SignalR.Hubs; namespace PopForums.Messaging { public class Topics : Hub { public void ListenTo(int topicID) { Groups.Add(Context.ConnectionId, topicID.ToString()); } } } Have I mentioned how awesomely not complicated this is? The hub acts as the channel between the server and the client, and you’ll see how JavaScript calls the above method in a moment. Next, the broker class and its associated interface: using Microsoft.AspNet.SignalR; using Topic = PopForums.Models.Topic; namespace PopForums.Messaging { public interface IBroker { void NotifyNewPosts(Topic topic, int lasPostID); } public class Broker : IBroker { public void NotifyNewPosts(Topic topic, int lasPostID) { var context = GlobalHost.ConnectionManager.GetHubContext<Topics>(); context.Clients.Group(topic.TopicID.ToString()).notifyNewPosts(lasPostID); } } } The NotifyNewPosts method uses the static GlobalHost.ConnectionManager.GetHubContext<Topics>() method to get a reference to the hub, and then makes a call to clients in the group matched by the topic ID. It’s calling the notifyNewPosts method on the client. The TopicService class, which handles the reply data from the MVC controller, has an instance of the broker new’d up by dependency injection, so it took literally one line of code in the reply action method to get things moving. _broker.NotifyNewPosts(topic, post.PostID); The JavaScript side of things wasn’t much harder. When you click the reply button (or quote button), the reply window opens up and fires up a connection to the hub: var hub = $.connection.topics; hub.client.notifyNewPosts = function (lastPostID) { PopForums.setReplyMorePosts(lastPostID); }; $.connection.hub.start().done(function () { hub.server.listenTo(topicID); }); The important part to look at here is the creation of the notifyNewPosts function. That’s the method that is called from the server in the Broker class above. Conversely, once the connection is done, the script calls the listenTo method on the server, letting it know that this particular connection is listening for new posts on this specific topic ID. This whole experiment enables a lot of ideas that would make the forum more Facebook-like, letting you know when stuff is going on around you.

    Read the article

  • Part 1 - Load Testing In The Cloud

    - by Tarun Arora
    Azure is fascinating, but even more fascinating is the marriage of Azure and TFS! Introduction Recently a client I worked for had 2 major business critical applications being delivered, with very little time budgeted for Performance testing, we immediately hit a bottleneck when the performance testing phase started, the in house infrastructure team could not support the hardware requirements in the short notice. It was suggested that the performance testing be performed on one of the QA environments which was a fraction of the production environment. This didn’t seem right, the team decided to turn to the cloud. The team took advantage of the elasticity offered by Azure, starting with a single test agent which was provisioned and ready for use with in 30 minutes the team scaled up to 17 test agents to perform a very comprehensive performance testing cycle. Issues were identified and resolved but the highlight was that the cost of running the ‘test rig’ proved to be less than if hosted on premise by the infrastructure team. Thank you for taking the time out to read this blog post, in the series of posts, I’ll try and cover the start to end of everything you need to know to use Azure to build your Test Rig in the cloud. But Why Azure? I have my own Data Centre… If the environment is provisioned in your own datacentre, - No matter what level of service agreement you may have with your infrastructure team there will be down time when the environment is patched - How fast can you scale up or down the environments (keeping the enterprise processes in mind) Administration, Cost, Flexibility and Scalability are the areas you would want to think around when taking the decision between your own Data Centre and Azure! How is Microsoft's Public Cloud Offering different from Amazon’s Public Cloud Offering? Microsoft's offering of the Cloud is a hybrid of Platform as a Service (PaaS) and Infrastructure as a Service (IaaS) which distinguishes Microsoft's offering from other providers such as Amazon (Amazon only offers IaaS). PaaS – Platform as a Service IaaS – Infrastructure as a Service Fills the needs of those who want to build and run custom applications as services. Similar to traditional hosting, where a business will use the hosted environment as a logical extension of the on-premises datacentre. A service provider offers a pre-configured, virtualized application server environment to which applications can be deployed by the development staff. Since the service providers manage the hardware (patching, upgrades and so forth), as well as application server uptime, the involvement of IT pros is minimized. On-demand scalability combined with hardware and application server management relieves developers from infrastructure concerns and allows them to focus on building applications. The servers (physical and virtual) are rented on an as-needed basis, and the IT professionals who manage the infrastructure have full control of the software configuration. This kind of flexibility increases the complexity of the IT environment, as customer IT professionals need to maintain the servers as though they are on-premises. The maintenance activities may include patching and upgrades of the OS and the application server, load balancing, failover clustering of database servers, backup and restoration, and any other activities that mitigate the risks of hardware and software failures.   The biggest advantage with PaaS is that you do not have to worry about maintaining the environment, you can focus all your time in solving the business problems with your solution rather than worrying about maintaining the environment. If you decide to use a VM Role on Azure, you are asking for IaaS, more on this later. A nice blog post here on the difference between Saas, PaaS and IaaS. Now that we are convinced why we should be turning to the cloud and why in specific Azure, let’s discuss about the Test Rig. The Load Test Rig – Topology Now the moment of truth, Of course a big part of getting value from cloud computing is identifying the most adequate workloads to take to the cloud, so I’ve decided to try to make a Load Testing rig where the Agents are running on Windows Azure.   I’ll talk you through the above Topology, - User: User kick starts the load test run from the developer workstation on premise. This passes the request to the Test Controller. - Test Controller: The Test Controller is on premise connected to the same domain as the developer workstation. As soon as the Test Controller receives the request it makes use of the Windows Azure Connect service to orchestrate the test responsibilities to all the Test Agents. The Windows Azure Connect endpoint software must be active on all Azure instances and on the Controller machine as well. This allows IP connectivity between them and, given that the firewall is properly configured, allows the Controller to send work loads to the agents. In parallel, the Controller will collect the performance data from the agents, using the traditional WMI mechanisms. - Test Agents: The Test Agents are on the Windows Azure Public Cloud, as soon as the test controller issues instructions to the test agents, the test agents start executing the load tests. The HTTP requests are issued against the web server on premise, the results are captured by the test agents. And finally the results are passed over to the controller. - Servers: The Web Server and DB Server are hosted on premise in the datacentre, this is usually the case with business critical applications, you probably want to manage them your self. Recap and What’s next? So, in the introduction in the series of blog posts on Load Testing in the cloud I highlighted why creating a test rig in the cloud is a good idea, what advantages does Windows Azure offer and the Test Rig topology that I will be using. I would also like to mention that i stumbled upon this [Video] on Azure in a nutshell, great watch if you are new to Windows Azure. In the next post I intend to start setting up the Load Test Environment and discuss pricing with respect to test agent machine types that will be used in the test rig. Hope you enjoyed this post, If you have any recommendations on things that I should consider or any questions or feedback, feel free to add to this blog post. Remember to subscribe to http://feeds.feedburner.com/TarunArora.  See you in Part II.   Share this post : CodeProject

    Read the article

  • Five development tools I can't live without

    - by bconlon
    When applying to join Geeks with Blogs I had to specify the development tools I use every day. That got me thinking, it's taken a long time to whittle my tools of choice down to the selection I use, so it might be worth sharing. Before I begin, I appreciate we all have our preferred development tools, but these are the ones that work for me. Microsoft Visual Studio Microsoft Visual Studio has been my development tool of choice for more years than I care to remember. I first used this when it was Visual C++ 1.5 (hats off to those who started on 1.0) and by 2.2 it had everything I needed from a C++ IDE. Versions 4 and 5 followed and if I had to guess I would expect more Windows applications are written in VC++ 6 and VB6 than any other language. Then came the not so great versions Visual Studio .Net 2002 (7.0) and 2003 (7.1). If I'm honest I was still using v6. 2005 was better and 2008 was simply brilliant. Everything worked, the compiler was super fast and I was happy again...then came 2010...oh dear. 2010 is a big step backwards for me. It's not encouraging for my upcoming WPF exploits that 2010 is fronted in WPF technology, with the forever growing Find/Replace dialog, the issues with C++ intellisense, and the buggy debugger. That said it is still my tool of choice but I hope they sort the issue in SP1. I've tried other IDEs like Visual Age and Eclipse, but for me Visual Studio is the best. A really great tool. Liquid XML Studio XML development is a tricky business. The W3C standards are often difficult to get to the bottom of so it's great to have a graphical tool to help. I first used Liquid Technologies 5 or 6 years back when I needed to process XML data in C++. Their excellent XML Data Binding tool has an easy to use Wizard UI (as compared to Castor or JAXB command line tools) and allows you to generate code from an XML Schema. So instead of having to deal with untyped nodes like with a DOM parser, instead you get an Object Model providing a custom API in C++, C#, VB etc. More recently they developed a graphical XML IDE with XML Editor, XSLT, XQuery debugger and other XML tools. So now I can develop an XML Schema graphically, click a button to generate a Sample XML document, and click another button to run the Wizard to generate code including a Sample Application that will then load my Sample XML document into the generated object model. This is a very cool toolset. Note: XML Data Binding is nothing to do with WPF Data Binding, but I hope to cover both in more detail another time. .Net Reflector Note: I've just noticed that starting form the end of February 2011 this will no longer be a free tool !! .Net Reflector turns .Net byte code back into C# source code. But how can it work this magic? Well the clue is in the name, it uses reflection to inspect a compiled .Net assembly. The assembly is compiled to byte code, it doesn't get compiled to native machine code until its needed using a just-in-time (JIT) compiler. The byte code still has all of the information needed to see classes, variables. methods and properties, so reflector gathers this information and puts it in a handy tree. I have used .Net Reflector for years in order to understand what the .Net Framework is doing as it sometimes has undocumented, quirky features. This really has been invaluable in certain instances and I cannot praise enough kudos on the original developer Lutz Roeder. Smart Assembly In order to stop nosy geeks looking at our code using a tool like .Net Reflector, we need to obfuscate (mess up) the byte code. Smart Assembly is a tool that does this. Again I have used this for a long time. It is very quick and easy to use. Another excellent tool. Coincidentally, .Net Reflector and Smart Assembly are now both owned by Red Gate. Again kudos goes to the original developer Jean-Sebastien Lange. TortoiseSVN SVN (Apache Subversion) is a Source Control System developed as an open source project. TortoiseSVN is a graphical UI wrapper over SVN that hooks into Windows Explorer to enable files to be Updated, Committed, Merged etc. from the right click menu. This is an essential tool for keeping my hard work safe! Many years ago I used Microsoft Source Safe and I disliked CVS type systems. But TortoiseSVN is simply the best source control tool I have ever used. --- So there you have it, my top 5 development tools that I use (nearly) every day and have helped to make my working life a little easier. I'm sure there are other great tools that I wish I used but have never heard of, but if you have not used any of the above, I would suggest you check them out as they are all very, very cool products. #

    Read the article

  • Defaulting the HLSL Vertex and Pixel Shader Levels to Feature Level 9_1 in VS 2012

    - by Michael B. McLaughlin
    I love Visual Studio 2012. But this is not a post about that. This is a post about tweaking one particular parameter that I’ve found a bit annoying. Disclaimer: You will be modifying important MSBuild files. If you screw up you will break your build tools. And maybe your computer will catch fire. I’m not responsible. No warranties or guaranties of any sort. This info is provided “as is”. By default, if you add a new vertex shader or pixel shader item to a project, it will be set to build with shader profile 4.0_level_9_3. If you need 9_3 functionality, this is all well and good. But (especially for Windows Store apps) you really want to target the lowest shader profile possible so that your game will run on as many computers as possible. So it’s a good idea to default to 9_1. To do this you could add in new HLSL files via “Add->New Item->Visual C++->HLSL->______ Shader File (.hlsl)” and then edit the shader files’ properties to set them manually to use 9_1 via “Properties->HLSL Compiler->General->Shader Model”. This is fine unless you forget to do this once and then submit your game with 9_3 shaders instead of 9_1 shaders to the Windows Store or to some other game store. Then you’d wind up with either rejection or angry “this doesn’t work on my computer! ripoff!” messages. There’s another option though. In “Program Files (x86)\Microsoft Visual Studio 11.0\Common7\IDE\ItemTemplates\VC\HLSL\1033\VertexShader” (note the path might vary slightly for you if you are using a 32-bit system or have a non-ENU version of Visual Studio 2012) you will find a “VertexShader.vstemplate” file. If you open this file in a text editor (e.g. Notepad++), then inside the CustomParameters tag within the TemplateContent tag you should see a CustomParameter tag for the ShaderType, i.e.: <CustomParameter Name="$ShaderType$" Value="Vertex"/> On a new line, we are going to add another CustomParameter tag to the CustomParameters tag. It will look like this: <CustomParameter Name="$ShaderModel$" Value="4.0_level_9_1"/> such that we now have:     <CustomParameters>       <CustomParameter Name="$ShaderType$" Value="Vertex"/>       <CustomParameter Name="$ShaderModel$" Value="4.0_level_9_1"/>     </CustomParameters> You can then save the file (you will need to be an Administrator or have Administrator access). Back in the 1033 directory (or whatever the number is for your language), go into the “PixelShader” directory. Edit the “PixelShader.vstemplate” file and make the same change (note that this time $ShaderType$ is “Pixel” not “Vertex”; you shouldn’t be changing that line anyway, but if you were to just copy and replace the above four lines then you will wind up creating pixel shaders that the HLSL compiler would try to compile as vertex shaders, with all sort of weird errors as a result). Once you’ve added the $ShaderModel$ line to “PixelShader.vstemplate” and have saved it, everything should be done. Since Feature Level 9_1 and 9_3 don’t support any of the other shader types, those are set to default to their appropriate minimums already (Compute and Geometry are set to “4.0” and Domain and Hull are set to “5.0”, which are their respective minimums (though not all 4.0 cards support Compute shaders; they were an optional feature added with DirectX 10.1 and only became required for DirectX 11 hardware). In case you are wondering where these magic values come from, you can find them all in the “fxc.xml” file in the “\Program Files (x86)\MSBuild\Microsoft.CPP\v4.0\V110\1033” directory (or whatever your language number is; 1033 is ENU and various other product languages have their own respective numbers (see: http://msdn.microsoft.com/en-us/goglobal/bb964664.aspx ) such that Japanese is 1041 (for example), though for all I know MSBuild tasks might be 1033 for everyone). If, like me, you installed VS 2012 to a drive other than the C:\ drive, you will find the vstemplate files in the drive to which you installed VS 2012 (D:\ in my case) but you will find the fxc.xml file on the C:\ drive. You should not edit fxc.xml. You will almost definitely break things by doing that; it’s just something you can look through to see all the other options that the FXC task takes such that you could, if needed, add further CustomParameter tags if you wanted to default to other supported options. I haven’t tried any others though so I don’t have any advice on how to set them.

    Read the article

  • Silverlight Relay Commands

    - by George Evjen
    v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} I am fairly new at Silverlight development and I usually have an issue that needs research every day. Which I enjoy, since I like the idea of going into a day knowing that I am  going to learn something new. The issue that I am currently working on centers around relay commands. I have a pretty good handle on Relay Commands and how we use them within our applications. <Button Command="{Binding ButtonCommand}" CommandParameter="NewRecruit" Content="New Recruit" /> Here in our xaml we have a button. The button has a Command and a CommandParameter. The command binds to the ButtonCommand that we have in our ViewModel RelayCommand _buttonCommand;         /// <summary>         /// Gets the button command.         /// </summary>         /// <value>The button command.</value>         public RelayCommand ButtonCommand         {             get             {                 if (_buttonCommand == null)                 {                     _buttonCommand = new RelayCommand(                         x => x != null && x.ToString().Length > 0 && CheckCommandAvailable(x.ToString()),                         x => ExecuteCommand(x.ToString()));                 }                 return _buttonCommand;             }         }   In our relay command we then do some checks with a lambda expression. We check if the command  parameter is null, is the length greater than 0 and we have a CheckCommandAvailable method that will tell  us if the button is even enabled. After we check on these three items we then pass the command parameter to an action method. This is all pretty straight forward, the issue that we solved a few days ago centered around having a control that needed to use a Relay Command and this control was a nested control and was using a different DataContext. The example below illustrates how we handled this scenario. In our xaml usercontrol we had to set a name to this control. <Controls3:RadTileViewItem x:Class="RecruitStatusTileView"     xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"     xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"     xmlns:d="http://schemas.microsoft.com/expression/blend/2008"     xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"      xmlns:Controls1="clr-namespace:Telerik.Windows.Controls;assembly=Telerik.Windows.Controls"      xmlns:Controls2="clr-namespace:Telerik.Windows.Controls;assembly=Telerik.Windows.Controls.Input"      xmlns:Controls3="clr-namespace:Telerik.Windows.Controls;assembly=Telerik.Windows.Controls.Navigation"      mc:Ignorable="d" d:DesignHeight="400" d:DesignWidth="800" Header="{Binding Title,Mode=TwoWay}" MinimizedHeight="100"                             x:Name="StatusView"> Here we are using a telerik RadTileViewItem. We set the name of this control to “StatusView”. In our button control we set our command parameters and commands different than the example above. <HyperlinkButton Content="{Binding BigBoardButtonText, Mode=TwoWay}" CommandParameter="{Binding 'Position.PositionName'}" Command="{Binding ElementName=StatusView, Path=DataContext.BigBoardCommand, Mode=TwoWay}" /> This hyperlink button lives in a ListBox control and this listbox has an ItemSource of PositionSelectors. The Command Parameter is binding to the Position.Position property of that PositionSelectors object. This again is pretty straight forward again. What gets a bit tricky is the Command property in the hyperlink. It is binding to the element name we created in the user control (StatusView) Because this hyperlink is in a listbox and is in the item template it doesn’t have a direct handle on the DataContext that the RadTileViewItem has so we have to make sure it does. We do that by binding to the element name of status view then set the path to DataContext.BigBoardCommand. BigBoardCommand is the name of the RelayCommand in the view model. private RelayCommand _bigBoardCommand = null;         /// <summary>         /// Gets the big board command.         /// </summary>         /// <value>The big board command.</value>         public RelayCommand BigBoardCommand         {             get             {                 if (_bigBoardCommand == null)                 {                     _bigBoardCommand = new RelayCommand(x => true, x => AddToBigBoard(x.ToString()));                 }                 return _bigBoardCommand;             }         } From there we check for true again and then call the action and pass in the parameter that we had as the command parameter. What we are working on now is a bit trickier than this second example. In the above example we are only creating this TileViewItem with this name “StatusView” once. In another part of our application we are generating multiple TileViewItems, so we cannot set the name in the control as we cant have multiple controls with the same name. When we run the application we get an error that reads that the value is out of expected range. My searching has led me to think we cannot have multiple controls with the same name. This is today’s problem and Ill post the solution to this once it is found.

    Read the article

  • Using Unity – Part 4

    - by nmarun
    In this part, I’ll be discussing about constructor and property or setter injection. I’ve created a new class – Product3: 1: public class Product3 : IProduct 2: { 3: public string Name { get; set; } 4: [Dependency] 5: public IDistributor Distributor { get; set; } 6: public ILogger Logger { get; set; } 7:  8: public Product3(ILogger logger) 9: { 10: Logger = logger; 11: Name = "Product 1"; 12: } 13:  14: public string WriteProductDetails() 15: { 16: StringBuilder productDetails = new StringBuilder(); 17: productDetails.AppendFormat("{0}<br/>", Name); 18: productDetails.AppendFormat("{0}<br/>", Logger.WriteLog()); 19: productDetails.AppendFormat("{0}<br/>", Distributor.WriteDistributorDetails()); 20: return productDetails.ToString(); 21: } 22: } This version has a property of type IDistributor and takes a constructor parameter of type ILogger. The IDistributor property has a Dependency attribute (Microsoft.Practices.Unity namespace) applied to it. IDistributor and its implementation are shown below: 1: public interface IDistributor 2: { 3: string WriteDistributorDetails(); 4: } 5:  6: public class Distributor : IDistributor 7: { 8: public List<string> DistributorNames = new List<string>(); 9:  10: public Distributor() 11: { 12: DistributorNames.Add("Distributor1"); 13: DistributorNames.Add("Distributor2"); 14: DistributorNames.Add("Distributor3"); 15: DistributorNames.Add("Distributor4"); 16: } 17: public string WriteDistributorDetails() 18: { 19: StringBuilder distributors = new StringBuilder(); 20: for (int i = 0; i < DistributorNames.Count; i++) 21: { 22: distributors.AppendFormat("{0}<br/>", DistributorNames[i]); 23: } 24: return distributors.ToString(); 25: } 26: } ILogger and the FileLogger have the following definition: 1: public interface ILogger 2: { 3: string WriteLog(); 4: } 5:  6: public class FileLogger : ILogger 7: { 8: public string WriteLog() 9: { 10: return string.Format("Type: {0}", GetType()); 11: } 12: } The Unity container creates an instance of the dependent class (the Distributor class) within the scope of the target object (an instance of Product3 class that will be called by doing a Resolve<IProduct>() in the calling code) and assign this dependent object to the attributed property of the target object. To add to it, property injection is a form of optional injection of dependent objects.The dependent object instance is generated before the container returns the target object. Unlike constructor injection, you must apply the appropriate attribute in the target class to initiate property injection. Let’s see how to change the config file to make this work. The first step is to add all the type aliases: 1: <typeAlias alias="Product3" type="ProductModel.Product3, ProductModel"/> 2: <typeAlias alias="ILogger" type="ProductModel.ILogger, ProductModel"/> 3: <typeAlias alias="FileLogger" type="ProductModel.FileLogger, ProductModel"/> 4: <typeAlias alias="IDistributor" type="ProductModel.IDistributor, ProductModel"/> 5: <typeAlias alias="Distributor" type="ProductModel.Distributor, ProductModel"/> Now define mappings for these aliases: 1: <type type="ILogger" mapTo="FileLogger" /> 2: <type type="IDistributor" mapTo="Distributor" /> Next step is to define the constructor and property injection in the config file: 1: <type type="IProduct" mapTo="Product3" name="ComplexProduct"> 2: <typeConfig extensionType="Microsoft.Practices.Unity.Configuration.TypeInjectionElement, Microsoft.Practices.Unity.Configuration"> 3: <constructor> 4: <param name="logger" parameterType="ILogger" /> 5: </constructor> 6: <property name="Distributor" propertyType="IDistributor"> 7: <dependency /> 8: </property> 9: </typeConfig> 10: </type> There you see a constructor element that tells there’s a property named ‘logger’ that is of type ILogger. By default, the type of ILogger gets resolved to type FileLogger. There’s also a property named ‘Distributor’ which is of type IDistributor and which will get resolved to type Distributor. On the calling side, I’ve added a new button, whose click event does the following: 1: protected void InjectionButton_Click(object sender, EventArgs e) 2: { 3: unityContainer.RegisterType<IProduct, Product3>(); 4: IProduct product3 = unityContainer.Resolve<IProduct>(); 5: productDetailsLabel.Text = product3.WriteProductDetails(); 6: } This renders the following output: This completes the part for constructor and property injection. In the next blog, I’ll talk about Arrays and Generics. Please see the code used here.

    Read the article

  • How to create a Subdomain in IIS7?

    - by Techboy
    In IIS7 I have a site: http://www.mydomain.com/mysite How can I get the same site to appear as: http://mysite.mydomain.com ? I already have the DNS set up and can ping it, I just do not know how to configure it in IIS7.

    Read the article

  • Network Error: no buffer space available

    - by braindump
    After some time of running fine, one of our Windows XP SP3 machines does not open some(!) new TCP/IP connections anymore. Putty says "Network Error: no buffer space available", IE won't open any new connections but e.g. network drive mappings still work, even new ones can be established. netstat does not show more open connections that usual, ping and dns lookups work fine. Any hints?

    Read the article

  • Errors when switching to specific static IP

    - by michaelc
    I had a Fedora box running using my static IP 69.169.136.6, etc, all configured according to what the ISP required. Just recently the hard drive failed (and I should have been keeping better backups) - while it is being recovered I would like to put up a webpage on my Archlinux PC explaining the problem - I presently do not have sufficient access to change the DNS record assigned to the domain. When I change my ip address while my system is running to 69.169.136.6, ifconfig reports the new ip address, but http://whatismyip.com/ does not. When I change it and reboot, I can't ping - the message I recieve is "connect: Network is unreachable" (when given one of google.com 's IP addresses - hostnames give me ping: unknown host xxx). Until I have access to the DNS system, what can I do to make this work? Edit: With new IP address, same problem, IP is now 69.169.136.29. Some commands might be useful: #ping 69.169.136.1 PING 69.169.136.1 (69.169.136.1) 56(84) bytes of data. 64 bytes from 69.169.136.1: icmp_seq=1 ttl=64 time=0.377 ms #ping 69.169.190.211 connect: Network is unreachable #ping 208.72.160.67 connect: Network is unreachable #ifconfig eth0 Link encap:Ethernet HWaddr 00:E0:4D:97:23:9B inet addr:69.169.136.29 Bcast:69.169.137.255 Mask:255.255.254.0 inet6 addr: fe80::2e0:4dff:fe97:239b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:132091 errors:0 dropped:0 overruns:0 frame:0 TX packets:17 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:9635179 (9.1 Mb) TX bytes:1322 (1.2 Kb) Interrupt:29 Base address:0x6000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:48 errors:0 dropped:0 overruns:0 frame:0 TX packets:48 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2480 (2.4 Kb) TX bytes:2480 (2.4 Kb) #ip route 69.169.136.0/23 dev eth0 proto kernel scope link src 69.169.136.29 #cat /etc/resolv.conf # Generated by dhcpcd #nameserver 208.67.222.222 #nameserver 208.67.220.220 nameserver 69.169.190.211 nameserver 208.72.160.67 # /etc/resolv.conf.tail can replace this line Update: have new static IP addresses, verified to work in Windows... Relevant portions of /etc/rc.conf below: #Static IP example #eth0="eth0 69.169.136.6 netmask 255.255.254.0 broadcast 69.169.136.1" #eth0="eth0 69.169.136.29 netmask 255.255.254.0 broadcast 69.169.137.255" eth0="eth0 69.169.136.32 netmask 255.255.254.0 broadcast 69.169.137.255" #eth0="dhcp" INTERFACES=(eth0) # Routes to start at boot-up (in this order) # Declare each route then list in ROUTES # - prefix an entry in ROUTES with a ! to disable it # #gateway="default gw 192.168.0.1" gateway="default gw 69.169.136.1" #gateway="69.169.136.1" ROUTES=(!gateway) #ROUTES=()

    Read the article

  • l2tp / ipsec debian Openswan U2.6.38 does not connect

    - by locojay
    i am trying to get ipsec/l2tp running on a debian server with an iphone as a client but always get: Dec 2 21:00:04 vpn pluto[22711]: packet from <clientip>:43598: received Vendor ID payload [RFC 3947] method set to=115 Dec 2 21:00:04 vpn pluto[22711]: packet from <clientip>:43598: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike] meth=114, but already using method 115 Dec 2 21:00:04 vpn pluto[22711]: packet from <clientip>:43598: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-08] meth=113, but already using method 115 Dec 2 21:00:04 vpn pluto[22711]: packet from <clientip>:43598: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-07] meth=112, but already using method 115 Dec 2 21:00:04 vpn pluto[22711]: packet from <clientip>:43598: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-06] meth=111, but already using method 115 Dec 2 21:00:04 vpn pluto[22711]: packet from <clientip>:43598: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-05] meth=110, but already using method 115 Dec 2 21:00:04 vpn pluto[22711]: packet from <clientip>:43598: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-04] meth=109, but already using method 115 Dec 2 21:00:04 vpn pluto[22711]: packet from <clientip>:43598: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 115 Dec 2 21:00:04 vpn pluto[22711]: packet from <clientip>:43598: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 115 Dec 2 21:00:04 vpn pluto[22711]: packet from <clientip>:43598: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02_n] meth=106, but already using method 115 Dec 2 21:00:04 vpn pluto[22711]: packet from <clientip>:43598: ignoring Vendor ID payload [FRAGMENTATION 80000000] Dec 2 21:00:04 vpn pluto[22711]: packet from <clientip>:43598: received Vendor ID payload [Dead Peer Detection] Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[4] <clientip> #20: responding to Main Mode from unknown peer <clientip> Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[4] <clientip> #20: transition from state STATE_MAIN_R0 to state STATE_MAIN_R1 Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[4] <clientip> #20: STATE_MAIN_R1: sent MR1, expecting MI2 Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[4] <clientip> #20: NAT-Traversal: Result using draft-ietf-ipsec-nat-t-ike (MacOS X): both are NATed Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[4] <clientip> #20: transition from state STATE_MAIN_R1 to state STATE_MAIN_R2 Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[4] <clientip> #20: STATE_MAIN_R2: sent MR2, expecting MI3 Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[4] <clientip> #20: ignoring informational payload, type IPSEC_INITIAL_CONTACT msgid=00000000 Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[4] <clientip> #20: Main mode peer ID is ID_IPV4_ADDR: '10.2.210.176' Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[4] <clientip> #20: switched from "L2TP-PSK-noNAT" to "L2TP-PSK-noNAT" Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #20: deleting connection "L2TP-PSK-noNAT" instance with peer <clientip> {isakmp=#0/ipsec=#0} Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #20: transition from state STATE_MAIN_R2 to state STATE_MAIN_R3 Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #20: new NAT mapping for #20, was <clientip>:43598, now <clientip>:49826 Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #20: STATE_MAIN_R3: sent MR3, ISAKMP SA established {auth=OAKLEY_PRESHARED_KEY cipher=aes_256 prf=oakley_sha group=modp1024} Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #20: Dead Peer Detection (RFC 3706): enabled Dec 2 21:00:05 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #20: the peer proposed: <public ip>/32:17/1701 -> 10.2.210.176/32:17/0 Dec 2 21:00:05 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #20: NAT-Traversal: received 2 NAT-OA. using first, ignoring others Dec 2 21:00:05 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #21: responding to Quick Mode proposal {msgid:311d3282} Dec 2 21:00:05 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #21: us: 171.138.2.13<171.138.2.13>:17/1701 Dec 2 21:00:05 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #21: them: <clientip>[10.2.210.176]:17/61719 Dec 2 21:00:05 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #21: transition from state STATE_QUICK_R0 to state STATE_QUICK_R1 Dec 2 21:00:05 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #21: STATE_QUICK_R1: sent QR1, inbound IPsec SA installed, expecting QI2 Dec 2 21:00:05 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #21: Dead Peer Detection (RFC 3706): enabled Dec 2 21:00:05 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #21: transition from state STATE_QUICK_R1 to state STATE_QUICK_R2 Dec 2 21:00:05 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #21: STATE_QUICK_R2: IPsec SA established transport mode {ESP=>0x05e23c9a <0x216077a9 xfrm=AES_256-HMAC_SHA1 NATOA=10.2.210.176 NATD=<clientip>:49826 DPD=enabled} Dec 2 21:00:26 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #20: received Delete SA(0x05e23c9a) payload: deleting IPSEC State #21 Dec 2 21:00:26 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #20: received and ignored informational message Dec 2 21:00:27 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #20: received Delete SA payload: deleting ISAKMP State #20 Dec 2 21:00:27 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip>: deleting connection "L2TP-PSK-noNAT" instance with peer <clientip> {isakmp=#0/ipsec=#0} Dec 2 21:00:27 vpn pluto[22711]: packet from <clientip>:49826: received and ignored informational message Dec 2 21:00:27 vpn pluto[22711]: ERROR: asynchronous network error report on eth0 (sport=4500) for message to <clientip> port 49826, complainant <clientip>: Connection refused [errno 111, origin ICMP type 3 code 3 (not authenticated)] my setup looks like this verizon fios actiontec -- DMZ-- ddwrt router -- debian xen instance actiontec : 192.168.1.1 ddwrt: 171.138.2.1 debian xen server: 171.138.2.13 forwarded udp 500, 4500, 1701 on ddwrt to debian xen instance. vpn passthrough is enabled /etc/ipsec.conf config setup dumpdir=/var/run/pluto/ nat_traversal=yes virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12,%v4:25.0.0.0/8,%v6:fd00::/8,%v6:fe80::/10,%v4:!171.138.2.0/24,%v4:!192.168.1.0/24 protostack=netkey # Add connections here conn L2TP-PSK-NAT rightsubnet=vhost:%priv also=L2TP-PSK-noNAT conn L2TP-PSK-noNAT authby=secret pfs=no auto=add keyingtries=3 # we cannot rekey for %any, let client rekey rekey=no # Apple iOS doesn't send delete notify so we need dead peer detection # to detect vanishing clients dpddelay=30 dpdtimeout=120 dpdaction=clear # Set ikelifetime and keylife to same defaults windows has ikelifetime=8h keylife=1h # l2tp-over-ipsec is transport mode type=transport # left=171.138.2.13 # # For updated Windows 2000/XP clients, # to support old clients as well, use leftprotoport=17/%any leftprotoport=17/1701 # # The remote user. # right=%any # Using the magic port of "%any" means "any one single port". This is # a work around required for Apple OSX clients that use a randomly # high port. rightprotoport=17/%any #force all to be nat'ed. because of ios conn passthrough-for-non-l2tp type=passthrough left=171.138.2.13 leftnexthop=171.138.2.1 right=0.0.0.0 rightsubnet=0.0.0.0/0 auto=route /etc/xl2tp/xl2tp.conf [global] ipsec saref = no listen-addr = 171.138.2.13 ;port = 1701 ;debug network = yes ;debug tunnel = yes ;debug network = yes ;debug packet = yes [lns default] ip range = 171.138.2.231-171.138.2.239 local ip = 171.138.2.13 assign ip = yes require chap = no refuse pap = no require authentication = no ;name = OpenswanVPN ppp debug = yes pppoptfile = /etc/ppp/options.xlt2tpd lenght bit = yes /etc/ppp/options.xl2tpd ;require-mschap-v2 pcp-accept-local ipcp-accept-local ipcp-accept-remote ;ms-dns 171.138.2.1 ms-dns 192.168.1.1 ms-dns 8.8.8.8 name l2tpd noccp auth crtscts idle 1800 mtu 1410 mru 1410 lock proxyarp connect-delay 5000 debug dump logfd 2 logfile /var/log/xl2tpd.log ipsec verify Checking your system to see if IPsec got installed and started correctly: Version check and ipsec on-path [OK] Linux Openswan U2.6.38/K3.0.0-1-amd64 (netkey) Checking for IPsec support in kernel [OK] SAref kernel support [N/A] NETKEY: Testing XFRM related proc values [OK] [OK] [OK] Checking that pluto is running [OK] Pluto listening for IKE on udp 500 [OK] Pluto listening for NAT-T on udp 4500 [OK] Two or more interfaces found, checking IP forwarding [FAILED] Checking NAT and MASQUERADEing [OK] Checking for 'ip' command [OK] Checking /bin/sh is not /bin/dash [WARNING] Checking for 'iptables' command [OK] Opportunistic Encryption Support [DISABLED] The failed can be ignored i guess since cat /proc/sys/net/ipv4/ip_forward returns 1 any help would be much appreciated as i don't have any idea why this is not working

    Read the article

  • 301 redirect root domain to www subdomain on godaddy windows hosting account

    - by Greg
    If I type in domain.com and www.domain.com, they both show the same website, but show different urls in the address bar. I'd like visitors and search engines that just type "domain.com" to be redirected to "www.domain.com". I'm using IIS 7 on a godaddy hosting account. How do I redirect all requests for "domain.com" to "www.domain.com"? I have the default DNS setup, "domain.com" as my "A record" and the cname "www" points to my "A record".

    Read the article

  • Remote Email Access?

    - by Tyler
    I have remote email access from an iPhone or my Android phone, but I cannot setup a Windows Email Client to check my email using the exact same information I provided in my phones. The email system is an Exchange 2003 and I hate using the cheap Outlook Web App that it has. User: [email protected] Password: 1234 Server: mail.domain.com And that works for they phones. So why can't I get it to work on my email client? Maybe a DNS problem?

    Read the article

  • Any free networking lab?

    - by Gok Demir
    I want to study network. But I don't have an access to a sample network (routers, DNS, IP4, IP6 windows linux mixed heterogenous system). Do you know any online network to study (Free as possible). Is it possible to simulate network topologies with a single PC using virtual machine. If so could you guide me?

    Read the article

  • Windows 7 extremely slow login, exchange performance, printer enumeration, etc...

    - by Jeff
    Background: I have a fresh copy of Windows 7 Professional x64 on a Dell Latitude E6500. The laptop has 8GB RAM, 250GB drive, and all Intel peripherals (net/wifi/graphics). All available Windows updates, as well as hardware drivers are installed. The IT folks where I work joined the computer to our Windows 2003-based Active Directory domain. There are no errors in any logs that we've looked at, and Group Policy templates appear to have applied properly. Problem: Every time I turn on or reboot the computer, it takes between 2 to 10 (all times are actual) minutes after successfully typing my username/password to get to my desktop. My login script does not always run. Sometimes I get a black screen, and a couple of minutes later the login script will pop up and take up to 10 minutes to complete. I can get around this by hitting cntrl-shift-esc and running explorer.exe from the Task Manager. The login script continues to hang, but I can minimize it and go on about my business. Either way, it generally throws errors prior to completing. I often get slow or failed connectivity to Exchange via Outlook. When I bring up printer dialogs, they take several minutes to populate, and block the calling app while doing so. Copies to SMB shares are very slow. On my home network, everything works fine. On both the work network and home network, I can use remote internet resources just fine. Web pages pull up, remote VPN's are fine, I can max out bandwidth on SpeakEasy Speed Test. I can get almost max bandwidth transferring FTP/HTTP over a LAN. Another symptom of the problem is that when I first log in, the work network shows as "Identifying" for a long time in the Network and Sharing Center, and will often then change to the name of the work domain, but say "Unauthenticated Network". Note that this computer previously ran Windows Vista with none of these problems. Attempts to Fix: Installed the Win7 admin pack Uninstalled/reinstalled all hardware drivers Verified Active Directory DNS settings (Vista works relatively well on the same network) Reset all TCP/IP settings on all adapters using the netsh commands to do so Disabled ipv6 on all adapters Disable wifi adapter while on work network Locked the network card to 100/Full, 1000/Full; also tried Auto Added various important addresses to hosts file (exchange, dns, ad) -- removed when didn't help My background is a jpeg (sounds unrelated but there is apparently a win7 login bug related to solid color background) More I have forgotten The IT staff at my company indicated they believe this is due to having Windows 2003 AD servers and not having any Windows 2008 R2 AD servers. Other than that, they have no advice or assistance to offer other than a rebuild (already tried that once with similar symptoms), or downgrade to Vista. Any thoughts out there?

    Read the article

  • What is the equivalent of Cisco's 'ip virtual-reassembly' for a Juniper ISG 2000

    - by 2xyo
    I tested my dns servers with the oarc test and my size limit is at least 1403 bytes. I performed the same test before my Juniper ISG 2000 and the result is 2047 bytes. According to the chapter IP "Fragments Filtered" and this article, I think I have a fragmentation problem. This article talks about ip virtual-reassembly for cisco but I can't find the equivalent for Juniper. I prefer to find the good option in JunOS before I talk about this with my net admin :-) Thanks

    Read the article

  • openstack, bridging, netfilter and dnat

    - by Craig Sanders
    In a recent upgrade (from Openstack Diablo on Ubuntu Lucid to Openstack Essex on Ubuntu Precise), we found that DNS packets were frequently (almost always) dropped on the bridge interface (br100). For our compute-node hosts, that's a Mellanox MT26428 using the mlx4_en driver module. We've found two workarounds for this: Use an old lucid kernel (e.g. 2.6.32-41-generic). This causes other problems, in particular the lack of cgroups and the old version of the kvm and kvm_amd modules (we suspect the kvm module version is the source of a bug we're seeing where occasionally a VM will use 100% CPU). We've been running with this for the last few months, but can't stay here forever. With the newer Ubuntu Precise kernels (3.2.x), we've found that if we use sysctl to disable netfilter on bridge (see sysctl settings below) that DNS started working perfectly again. We thought this was the solution to our problem until we realised that turning off netfilter on the bridge interface will, of course, mean that the DNAT rule to redirect VM requests for the nova-api-metadata server (i.e. redirect packets destined for 169.254.169.254:80 to compute-node's-IP:8775) will be completely bypassed. Long-story short: with 3.x kernels, we can have reliable networking and broken metadata service or we can have broken networking and a metadata service that would work fine if there were any VMs to service. We haven't yet found a way to have both. Anyone seen this problem or anything like it before? got a fix? or a pointer in the right direction? Our suspicion is that it's specific to the Mellanox driver, but we're not sure of that (we've tried several different versions of the mlx4_en driver, starting with the version built-in to the 3.2.x kernels all the way up to the latest 1.5.8.3 driver from the mellanox web site. The mlx4_en driver in the 3.5.x kernel from Quantal doesn't work at all) BTW, our compute nodes have supermicro H8DGT motherboards with built-in mellanox NIC: 02:00.0 InfiniBand: Mellanox Technologies MT26428 [ConnectX VPI PCIe 2.0 5GT/s - IB QDR / 10GigE] (rev b0) we're not using the other two NICs in the system, only the Mellanox and the IPMI card are connected. Bridge netfilter sysctl settings: net.bridge.bridge-nf-call-arptables = 0 net.bridge.bridge-nf-call-iptables = 0 net.bridge.bridge-nf-call-ip6tables = 0 Since discovering this bridge-nf sysctl workaround, we've found a few pages on the net recommending exactly this (including Openstack's latest network troubleshooting page and a launchpad bug report that linked to this blog-post that has a great description of the problem and the solution)....it's easier to find stuff when you know what to search for :), but we haven't found anything on the DNAT issue that it causes.

    Read the article

  • gmail dkim=neutral (no signature)

    - by Bretticus
    After testing much and retracing my steps, I still cannot get google mail to validate. My mail server is Debian 5.0 with exim Exim version 4.72 #1 built 31-Jul-2010 08:12:17 Copyright (c) University of Cambridge, 1995 - 2007 Berkeley DB: Berkeley DB 4.8.24: (August 14, 2009) Support for: crypteq iconv() IPv6 PAM Perl Expand_dlfunc GnuTLS move_frozen_messages Content_Scanning DKIM Old_Demime Lookups: lsearch wildlsearch nwildlsearch iplsearch cdb dbm dbmnz dnsdb dsearch ldap ldapdn ldapm mysql nis nis0 passwd pgsql sqlite Authenticators: cram_md5 cyrus_sasl dovecot plaintext spa Routers: accept dnslookup ipliteral iplookup manualroute queryprogram redirect Transports: appendfile/maildir/mailstore/mbx autoreply lmtp pipe smtp Fixed never_users: 0 Size of off_t: 8 GnuTLS compile-time version: 2.4.2 GnuTLS runtime version: 2.4.2 Configuration file is /var/lib/exim4/config.autogenerated My remote smtp transport configuration: remote_smtp: debug_print = "T: remote_smtp for $local_part@$domain" driver = smtp helo_data = mailer.mydomain.com dkim_domain = mydomain.com dkim_selector = mailer dkim_private_key = /etc/exim4/dkim/mailer.mydomain.com.key dkim_canon = relaxed .ifdef REMOTE_SMTP_HOSTS_AVOID_TLS hosts_avoid_tls = REMOTE_SMTP_HOSTS_AVOID_TLS .endif .ifdef REMOTE_SMTP_HEADERS_REWRITE headers_rewrite = REMOTE_SMTP_HEADERS_REWRITE .endif .ifdef REMOTE_SMTP_RETURN_PATH return_path = REMOTE_SMTP_RETURN_PATH .endif .ifdef REMOTE_SMTP_HELO_FROM_DNS helo_data=REMOTE_SMTP_HELO_DATA .endif The path to my private key is correct. I see a DKIM header in my messages as they end up in my gmail account: DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=mydomain.com; s=mailer; h=Content-Type:MIME-Version:Message-ID:Date:Subject:Reply-To:To:From; bh=nKgQAFyGv<snip>tg=; b=m84lyYvX6<snip>RBBqmW52m1ce2g=; However, gmail headers always report dkim=neutral (no signature): dkim=neutral (no signature) [email protected] My DNS results: dig +short txt mailer._domainkey.mydomain.com mailer._domainkey. mydomain.com descriptive text "v=DKIM1\; k=rsa\; t=y\; p=LS0tLS1CRUdJ<snip>M0RRRUJBUVV" "BQTRHTkFEQ0J<snip>GdLamdaaG" "JwaFZkai93b3<snip>laSCtCYmdsYlBrWkdqeVExN3gxN" "mpQTzF6OWJDN3hoY21LNFhaR0NjeENMR0FmOWI4Z<snip>tLQo=" Note that the base64 public key is 364 chars long so I had to break up the key using bind9. $ORIGIN _domainkey. mydomain.com. mailer TXT ("v=DKIM1; k=rsa; t=y; p=LS0tLS1CRUdJTiBQVUJM<snip>U0liM0RRRUJBUVV" "BQTRHTkFEQ0JpUUtCZ1<snip>15MGdLamdaaG" "JwaFZkai93b3lDK21MR<snip>YlBrWkdqeVExN3gxN" "mpQTzF6OWJDN3hoY21L<snip>Ci0tLS0tRU5E" "IFBVQkxJQyBLRVktLS0tLQo=") Can anyone point me in the right direction? I would really appreciate it.

    Read the article

  • Adding FTP publishing to IIS Website: cannot connect

    - by user46250
    I used the wizard to add ftp publishing with anonymous access and mydomain.com as binding (I followed this tut: http://www.windowsnetworking.com/articles_tutorials/IIS-FTP-Publishing-Service-Part2.html ) When I try to connect with filezilla with anonymous user I get "EAI_NODATA - No address associated with nodename". The tutorial on IIS never mentions anything like this so how to fix this ? Should I use ftp.mydomain.com instead ? If yes should I do something (add A record in dns ?)

    Read the article

  • VirtualBox guest responds to ping but all ports closed in nmap

    - by jeremyjjbrown
    I want to setup a test database on a vm for development purposes but I cannot connect to the server via the network. I've got Ubuntu 12.04vm installed on 12.04 host in Virtualbox 4.2.4 set to - Bridged network mode - Promiscuous Allow All When I try to ping the virtual guest from any network client I get the expected result. PING 192.168.1.209 (192.168.1.209) 56(84) bytes of data. 64 bytes from 192.168.1.209: icmp_req=1 ttl=64 time=0.427 ms ... Internet access inside the vm is normal But when I nmap it I get nothin! jeremy@bangkok:~$ nmap -sV -p 1-65535 192.168.1.209 Starting Nmap 5.21 ( http://nmap.org ) at 2012-11-15 18:39 CST Nmap scan report for jeremy (192.168.1.209) Host is up (0.0032s latency). All 65535 scanned ports on jeremy (192.168.1.209) are closed Service detection performed. Please report any incorrect results at http://nmap.org/submit/ Nmap done: 1 IP address (1 host up) scanned in 0.88 seconds ufw and iptables on VM... jeremy@jeremy:~$ sudo service ufw stop [sudo] password for jeremy: ufw stop/waiting jeremy@jeremy:~$ sudo iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination I have scanned around and have no reason to believe that my router is blocking internal ports. jeremy@bangkok:~$ nmap -v 192.168.1.2 Starting Nmap 5.21 ( http://nmap.org ) at 2012-11-15 18:44 CST Initiating Ping Scan at 18:44 Scanning 192.168.1.2 [2 ports] Completed Ping Scan at 18:44, 0.00s elapsed (1 total hosts) Initiating Parallel DNS resolution of 1 host. at 18:44 Completed Parallel DNS resolution of 1 host. at 18:44, 0.03s elapsed Initiating Connect Scan at 18:44 Scanning 192.168.1.2 [1000 ports] Discovered open port 445/tcp on 192.168.1.2 Discovered open port 139/tcp on 192.168.1.2 Discovered open port 3306/tcp on 192.168.1.2 Discovered open port 80/tcp on 192.168.1.2 Discovered open port 111/tcp on 192.168.1.2 Discovered open port 53/tcp on 192.168.1.2 Discovered open port 5902/tcp on 192.168.1.2 Discovered open port 8090/tcp on 192.168.1.2 Discovered open port 6881/tcp on 192.168.1.2 Completed Connect Scan at 18:44, 0.02s elapsed (1000 total ports) Nmap scan report for 192.168.1.2 Host is up (0.0017s latency). Not shown: 991 closed ports PORT STATE SERVICE 53/tcp open domain 80/tcp open http 111/tcp open rpcbind 139/tcp open netbios-ssn 445/tcp open microsoft-ds 3306/tcp open mysql 5902/tcp open vnc-2 6881/tcp open bittorrent-tracker 8090/tcp open unknown Read data files from: /usr/share/nmap Nmap done: 1 IP address (1 host up) scanned in 0.08 seconds Answer... Turns out all of the ports were open to the network. I installed open ssh and confirmed it. Then I edited my db conf to listen to external IP's and all was well.

    Read the article

  • Access Home Network Server via External Address (DSL vs Cable)

    - by Dominic Barnes
    For the last few months, I've been using a server on my home network for basic backups and hosting some small websites. Up until this past week, I've been using Comcast (cable) as an ISP and now that I've moved into an apartment, I'm using AT&T. (DSL) I've set up dynamic DNS and I can verify it works externally. However, I can't seem to access the public address from within the local network. Is there something DSL does differently from Cable that makes this frustration possible?

    Read the article

< Previous Page | 422 423 424 425 426 427 428 429 430 431 432 433  | Next Page >