Search Results

Search found 64721 results on 2589 pages for 'windows usb drive'.

Page 426/2589 | < Previous Page | 422 423 424 425 426 427 428 429 430 431 432 433  | Next Page >

• DVI monitor detected only on computer startup

  - by kamil

  I've recently connected a new monitor, LG M2252D-PZ, to a rather outdated computer with Windows XP and Radeon 9600. XP has SP3 installed, video drivers are the latest version back from the times the video card was still supported. My problem is that the monitor works fine only as long as I don't turn it off or switch it to a different input. When I turn it back on, it says "no signal". The key to the problem must be the DVI port, to which the new monitor is connected. The previous monitor was connected to the VGA output, and I've tested that the new one also works fine when connected to the analogue port. Apparently, the computer tests for the presence of a monitor on the DVI port only on startup. The question is, how do I change this?

  Read the article

• When I move or delete files, they occasionally appear right back where they were a day later

  - by Shane Nault

  When I move or delete files, they occasionally appear right back where they were a day later. Also, when I move files, they not only re-appear where I moved them from, they are also where I moved them to as well. Is my system duplicating files? It seems so. This problem has been occurring randomly, but with increasing regularity. Most of the issues are with downloaded music and image files, but it has happened occasionally with Word documents as well. Also, some of my desktop icons have reappeared after I have moved or deleted them. I have run extensive system scans for malware, viruses and the sort but nothing pops up. Is there something wrong with my settings or is there another problem? I use Windows 7, SP 1 with all current updates, and have a few other issues. I was worried that perhaps some of my settings were incorrect.

  Read the article

• something strange about Win-XP's command shell

  - by user1762055

  I wrote the following command in windows XP's command shell and something strange happened: C:\Folder1> copy sample.txt : Because of my typing mistake, I wrote ":" instead of "D:" ... but it copied the sample.txt to somewhere I cant find! I searched my whole HDD for sample.txt but the only instance of this file is the original one which is in C:\Folder1. Do you know where ":" path actually is in Win-XP command shell? You might say ":" is current path and the file has been copied onto itself but look at this: If you run that command for the first time, this will be the result: 1 file copied. but the next time you run that command it will ask you: overwrite sample.txt? (yes/no/all) So if it were writing the file onto itself, both results would have to be the same but they aren't. Thanks in advance for your help.

  Read the article

• How can I re-create Microsoft Cluster Service resource groups on a different cluster?

  - by PersonalNexus

  I use Microsoft Cluster Service on a cluster of Windows Server 2003 machines containing several dozen resource groups. In the process of migrating to newer hardware, I would like move resources to the new machines on resource group at a time spread out over a few days to ease the migration and minimize risk. I was wondering of there was a smarter way to do this than manually re-creating resources on the new and then deleting them on the old cluster? The cluster has already been set up properly, the only missing is the resource groups and the resources they contain (IP, network names, services...). I have looked through the options of the cluster admin GUI and cluster.exe's commandline options, but haven't found anything like an import/export feature to copy over the configuration of a resource or entire resource group. Does something like this exist?

  Read the article

• Pull/push student assignment files from computer lab computers (Windows 7)

  - by mkstreet

  I have a computer lab with about 35 PC's all running Windows 7. The students do their work and save it on the D-drive in a particular folder such as a folder with the same name as the computer's name (e.g. LABPC001). I'd like a centralized way to pull all these folders in to the teacher's computer in the lab to check the assignments. It would be best if this didn't involve using an external website (e.g. Dropbox). I would also like to be able to distribute (send) files to the students in these same folders. I've seen software applications that do this but they cost about US$1000 which is far beyond our means. Suggestions for free, or almost free, best ways to set this up?

  Read the article

• What options exist when the vendor does not supply an ADB driver for an Android device?

  - by STATUS_ACCESS_DENIED

  So I bought an Android phone and the vendor does not offer any drivers whatsoever. The Android SDK and the drivers that come with it don't seem to work with the device, but the device itself reports as Android 2.2.1. Other users have reported that the drivers of the Nook Color worked for them, but I cannot confirm this, after trying. What options do I have to connect to the device (and ultimately to root it)? Is it truly just the .inf file that I need to manipulate in order to make the device ID known to Windows? After all there are tools to figure out those strings while the device is connected (although "unknown") ...

  Read the article

• Default profile for large

  - by user63434

  Hi I am setting up a master image to clone to all same machine type Windows 7 client, I login as administrastor and installed all the programs and changed the desktop settings etc, but my local administrator profile is 244megs in size, which will become the default profile of the local machine when sysprep, we have a 2003 server that I want to use mandatory profile for all login users which means I need to copy this profile to the server so when any users login to the domain they are using this profile, loading a 244megs profile is going to be very slow since it will be removed from the client when they logoff. So next time they login it will take a long time again. Is there anything I can do, can I just copy just the bare minimum files from the default profile to the server, as I am not sure what parts I need, I read that I must copy my documents, my documents/pictures so the folder redirection will work. What else do I need to copy to the server? I have firefox xmark sync also and MS words etc. THanks

  Read the article

• Connecting via url to a server that is on the same network as me

  - by Axehead

  Good day, I'm having problems with the ftp server I've just set up. I've already managed to configure my modem and wireless router to open up port 21 and setup ftp in my server. But It seems that when I try to connect to it when I'm in the same network as the server via URL, (ftp://mydomain.com) it redirects me to the modem's web interface. But then when I try to connect to it outside the network using a different internet connection. It succeeds. It also succeeds when I'm in the same network and I go to ftp://192.168.., the server's local IP. Am I supposed to adjust something in the modem or router? Or is this a different problem altogether? BTW I'm using Windows Server 2008 r2 as my server's OS and using IIS for ftp.

  Read the article

• Restore wubi install after changing master drive

  - by Johnny

  Recently I got a 160G drive to install other Unix distributions and learn to use them for the sake of my current job. However I've got only 2 drive connectors free (on the primary channel). Therefore I've decided to remove an 80G hard drive which has the MBR and the main Windows bootloader. My problem in particular is that I've got another 250G drive which has a Wubi installation of Ubuntu 10.04 (Lucid Lynx), which I want to preserve on the bootloader that's going to be running for all the other OSes (potentially Grub). How would I do that? Since Wubi is actually sort of windows reliant, as far as I've learned so far.

  Read the article

• Only 5 simultaneously users with PPTP VPN?

  - by Plastkort

  we have a windows 2008 R2 standard server which job is to accept incoming VPN connections via PPTP. it seems to work fine, but the moment the 6th user try to connect, we get the following error: ERROR_VPN_DISCONNECT 807 The network connection between your computer and the VPN server was interrupted. This can be caused by a problem in the VPN transmission and is commonly the result of internet latency or simply that your VPN server has reached capacity. where do we find out how to increase the amount of simultaneously users?, I read somewhere that we can have over 100 connected clients at the same time, when I created this server, I did the following : Network & sharing - Network adapters - File - new incoming connections now I tried to choose and create users here, but we have a domain controller which seems to override this, so the domain users works after this I was able to connect atleast 5 clients... how and where do I increase the "capacity"?

  Read the article

• Moving to an SSD with Windows 7

  - by Nick Gerakines

  Disclaimer: I've been digging around for a few days and didn't get what I was looking for in terms of answers, so I'm asking here. I've recently purchased an 80g SSD drive to use as my boot up and OS parition. I've got a windows 7 desktop with two 1TB (raid0) disks currently and I'm not sure where to start in terms of copying / moving the OS. I suppose that doing a fresh install isn't out of the question, but I've got an upgrade disk from Vista that I'd have to deal with. Where do I begin?

  Read the article

• Windows 2008 Best Raid Configuration

  - by Brandon Wilson

  I have 4 2TB hard drives and I was thinking about using Raid 10. This would give me 4TB correct? My next question is would it be easy to add more hard drives to the raid array. For example if I bought another hard drive can I add it to the array without backing up any data? Basically I want to be able to start off with 4TB and when the space becomes full add more space as needed. If this isn't possible with Raid 10, is it possible with any Raid configuration. Any suggestions would be appreciated. Thank you.

  Read the article

• how do I determine how much VRAM is in the system?

  - by Cocoa Dev

  I just bought a Samsung Series 7 laptop but I have no idea how much VRAM the graphics card has. This is an NVIDIA OPTIMUS card. I am using Windows 7 and will upgrade to 8 within the hour. I switched from Mac to PC. So its not familiar to me. I am sorry that you guys know where to look and think this question is very trivial. Someone is selling me his laptop and claims it has 1GB VRAM. The stock # says it should have 512MB and I wanted to verify these details.

  Read the article

• Mirroring a drive in Debian

  - by James Willson

  I have a drive with data on it. I dont want to use RAID, instead I want to do hourly backups to a second drive. I basically want to mirror the data drive and resync every hour. It is inefficient to re-move the data each time so really I only want to move across what changes. I.e if I add a new file to the data drive only that file will be moved across. What tools are there for doing this on the command line? I used to use luckybackup on Ubuntu but now im on commandline debian.

  Read the article

• Updating GeForce 9200 driver on Vista (64-bit) yields installer failed

  - by weka

  OK, so I have a Windows Vista... more specifically this: http://www.newegg.com/Product/Product.aspx?Item=N82E16883103182 a Acer Aspire AX3200-U3600A Desktop. I have DirectX 11 and I am trying to update my drivers... During the update of the latest one: GeForce 306.23 Driver my screen flashes a bit and goes black. This is standard when updating GRAPHIC DRIVERS. Then... my screen shifts 50 pixels or so to the left... OFFSCREEN. Not even Auto Image Adjust will fix the screen back... Then after that happens, I get this: Help, please? I just want to update my graphic drivers....

  Read the article

• Backup restore issue

  - by rrahman_bd

  I have a windows server 2008 with exchange database full backup. Now for testing purpose i want to restore that full server to a VM. I have copied the whole backup to VM01 and took it to Private Network. And now i want to take backup from VM01 and restore it to VM02. Both are at private network. I was able to find VM02 test backup by searching in VM1. But the copyed restore file is not showing in the window !!! Is there any policy so that i can not restore except from the original location?

  Read the article

• Need to call a script at logon based on hostname. Win 2k3 Domain and XP/7 workstations.

  - by Malocchio

  I have a user logon script. I want to install printers based on hostname. Inside this folder \domain.local\SYSVOL\domain.local\Policies{DF3F608C-8D78-934F-B79F-1965F3C4409B}\User\Scripts\Logon I have cmd files for each host/workstation and the logon.cmd. Terminal Servers are honoring the environment variable %clientname% but the workstations are not. Relevant area of logon.cmd rem Delete all existing printer connections c:\windows\system32\con2prt.exe /f rem Call workstation specific script for connecting to printers %clientname%.cmd Excerpt from clientname.cmdL: rundll32 printui,PrintUIEntry /in /n\\fileserv\PhaserPS rundll32 printui,PrintUIEntry /in /n\\fileserv\CanonIR rundll32 printui,PrintUIEntry /y /n\\fileserv\CanonIR

  Read the article

• How do I get my XFX Radeon HD 7870 to work with 3 monitors using HDMI, DVI, and Mini DisplayPort?

  - by user88792

  I bought a XFX Double D FX-787A-CDFC Radeon HD 7870 and set it up using the HDMI, DVI and Mini DisplayPort (using an Apple mDP-to-VGA adapter). I hooked it up, installed the drivers and rebooted. The image came up on the third monitor in a weird resolution. Why did this happen and how can I fix it? I am using Windows 7 Ultimate and the system is completely updated. Side note: When I disconnect the Mini DisplayPort adapter it works fine, however for my work I need 3-4 monitors.

  Read the article

• Windows 7 File Transfer Speed over Gigabit is slow

  - by Adam Haile

  I've got windows 7 pro running on my file server and my main desktop. Each has a gigabit network connection and I'm connected to a gigabit switch. However, when trying to copy some large files, it's running pretty slow at a measly 12-15 MB/s The data is coming from a 7200RPM SATA drive (which I think should be good for almost 150MB/s) and going to a Drobo on the server connected via FireWire 800, so I can't think of any bottlenecks I might have in the hardware. But TeraCopy still says it's only going at 12-15 MB/s What else could be wrong here?

  Read the article

• Previous Versions delayed with SBS 2008 / Windows 7

  - by indeed005

  The SBS 2008 at this site has Previous Versions enabled on a mapped drive. The snapshots happen 3 times a day. I doubt they take very long; the diff size is only a few GB. The problem is that the users on Windows 7 cannot see their previous versions until a few hours later. Is there some indexing that has to happen before the Previous Versions are visible to the client machines? Edit: In the application log, 3 minutes after every scheduled backup, there is an event for VSS (EventID 8224) saying "The VSS service is shutting down due to idle timeout" Apparently this means it has finished successfully, even though modified files still do not show another version.

  Read the article

• Active Directoy GPO

  - by Phillip R.

  I am looking into some weird issues with active directory and group policy. This domain has been upgraded from windows NT and has a few different administrators over the years. I am looking through the Default Domain group policy and Default Domain Controller group policy. In the security areas and I will use the log on locally area as an example, it shows SIDes that begin with asterisks and are quite long they look sort of like the following *S-1-5-21-787626... Normally, when I see something like this I would think that the User account was no longer there and this was never cleaned up. Am I wrong in my assumption? Thanks in advance

  Read the article

• Access Denied of a folder on a Drive

  - by kanchan bor gohain

  I wanted to restrict access of other people in a certain drive of my computer. What I did was go to the Security Tab (under Drive Properties) and remove the All Users entry. My account is an administrator account. I left only Systems and Administrator on the list. However, when I tried to access drive D, I got an Access Denied error, and Security Tab is already missing.i resolved the problem using safe mode way but i got another problem, I'd used command prompt to hide(attrib) a folder in drive D but i can't access it, though i can access all other files. I used cmd to unhide but access denied

  Read the article

• Server's network capabilities are going into some sort of sleep mode?

  - by F4r-20

  I'm having trouble with a server (Windows Server 2008 R2) on my network. It is going down for short periods at a time, but not very often. The interesting thing: If I ping the server from my computer (we'll call this client-x) using the -t switch, I will continuously get no reply. However the second I ping client-x from the server, I can see the previous ping pick up a reply? It's almost as if pinging client-x from the server, wakes up the networking capabilities? Has anybody got any idea what is going on here?

  Read the article

• How to monitor a folder and trigger a command-line action when a file is created or edited?

  - by bigmattyh

  I need to set up some sort of a script on my Vista machine, so that whenever a file is added to a particular folder, it automatically triggers a background process that operates on the file. (The background process is just a command-line utility that takes the file name as an argument, along with some other predefined options.) I'd like to do this using native Windows features, if possible, for performance and maintenance reasons. I've looked into using Task Scheduler, but after perusing the trigger system for a while, I haven't been able to make much sense of it, and I'm not even sure if it's capable of doing what I need. I'd appreciate any suggestions. Thanks!

  Read the article

• Why my backup to USB Drive is too slow?

  - by Jonas

  I have tried several backup solutions for my data and none of them was good enough. I basically want to make a copy of my files to an attached USB Drive from time to time. I don't mind starting my backups manually, since the USB Drive is not always connected. My problem is that my data contains a lot of files (a huge amount), so backing up takes forever (more than 20 hours). Using "rsync" an other similar solutions is not working because the I/O needed to check the file for changes takes longer than the time to actually copy it. Any suggestions?

  Read the article

< Previous Page | 422 423 424 425 426 427 428 429 430 431 432 433  | Next Page >