Search Results

Search found 11825 results on 473 pages for 'all tech stuff'.

Page 427/473 | < Previous Page | 423 424 425 426 427 428 429 430 431 432 433 434  | Next Page >

• How to create NTFS partition in Linux to install Windows 7 from USB?

  - by Michal Stefanow

  I messed up with my computer and need help. Generally: install Windows 7 from USB. Problem: "setup was unable to create a new system partition" When first attempt to install Windows 7 failed I tried Linux live USB, installed distro to HDD, and erased all the existing partitions. Current state (fdisk -l): [writing from other computer so no copy and paste] /dev/sda1 305GB Linux /dev/sda2 7GB Extended /dev/sda5 7GB Linux Swam / Solaris To create a new, NTFS partition: fdisk /dev/sda n (for new) p (for primary) 3 (for partintion number) "No free sectors available" All the HDD was formatted couple of minutes before so there is a lot of free space but how to resize a parition? I cannot find an option for resizing in man fdisk. Some people say I should use gparted but my distro doesn't not contain this package. And my distro doesn't support wireless drivers so I have serious problems with downloading stuff. I tried also using cfdisk but any command results in: "cfdisk bad primary partition 1 partition ends in the final partial cylinder" I tried also removing partition 1 and then creating a new one (so there is no "no free sectors"). I'm receiving a warning: "Re-reading the partition table failed with error 16: Device or resource busy. The kernel still uses the old table. The new table will be used at the next reboot." After restating: "grub rescue, no known filesystem" It may indicate that some changes have been made BUT when running Windows 7 installed some another error: "Windows cannot be installed to Disk 0 Partition 1" More detailed: "Windows cannot be installed to this hard disk space. Windows must be installed to a partition formatted as NTFS." So formatting drive using Windows 7 installer BUT this time yet another error: "Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information" Apparently I cannot access logs (how?) and I am back to drawing board with my live USB (this time showing partition as HPFS/NTFS). Any suggestions how to install Windows 7? Should I reinstall Linux to HDD, erase existing partitions once again, and use Parted rather than gparted (parted is included in the distro). Or maybe should I create another bootable USB such as PartedMagic to painlessly create partitions? I just want to install Windows 7 from USB, my laptop is semi-operational and I am ready to receive some help regarding fdisk and creating NTFS partitions. UPDATE: I did as suggested (removed all the partitions) and tried to install in unallocated space. Tried to create a new partition and format it. Same error: "setup was unable to create a new system partition" Came to the conclusion it may have something to do with TrueCrypt I have recently installed. Right now trying to FIX MBR (as I haven't got possibility to create rescue disc without optical drive)

  Read the article

• Multiple OS's and GRUB chainloading

  - by Kent

  Hi, I want to have multiple OS installations and I have been advised that chain loading using GRUB is a good way to handle this. I have looked at tutorials on the web but I still have some questions before I can start. I want: Windows XP: 20 GB. For running some school stuff and a game which does not work through WINE. Xubuntu 9.04: 85 GB. My main OS. Another Linux distribution: 15 GB . For experimenting and trying Linux distributions out. I will: Wipe and install various distributions quite often on the 15 Use dd to make a copy of my Windows partition after installing it and getting things to work as I like. My experience is that Windows needs to be re-installed maybe once per year to not get bloated and slow. I have been told: To use GRUB chain loading. It will make it easier when kernel upgrades are made in the Linux distributions, as they modify the GRUB boot-menu. To my understanding I need to: (I might very well be mistaken) Install Windows first. Then install Xubuntu and let it write over the MBR with GRUB (I guess this is the default). Get the GRUB on the MBR start Windows XP if I want to (it's done by default), start Xubuntu using the kernel of my choice or defer execution to the boot sector of my other Linux distribution. The actual chain loading will only occur when I want to start my experimental install of Linux. I wonder: Is step 3 above correct and a good way to handle this? Is it also a good way to use chain-loading for both Xubuntu and my experimental Linux installation? How do I get a Linux distribution to install the boot loader it comes with to the boot sector of its partition and not to the MBR? If I can't get it to not touch the MBR. Then I could make a backup of the MBR using dd and then write it back after installing my experimental Linux installation. But then, how would I get the boot loader (lets say GRUB) into the boot sector of the experimental Linux installation? How would it work if said Linux installation gets a new kernel update and needs to update the GRUB menu?

  Read the article

• Synchronize the same set of files to 2 different locations with 2 different programs for 2 different purposes

  - by Hedgetrimmer

  Because of stupid questionable IT policies at my not-to-be-named place of occupation, I have been (and will be, for the forseeable future) carrying on an external hard drive a unison-synchronized copy of all of my documents and code, including code which resides in some of my "dotfiles" and other code which resides in ~/bin (things I've made are there because ~/bin is in my $PATH) along with some cruft generated (and to be generated) by conscript and its related "giter8" templating system for Scala project boilerplates. Despite this, I do use a symlinking program to store all of my important dotfiles in a subdirectory. Thanks to that somewhat complicated setup, I have resorted to making a directory full of symlinks to every directory (or file, as is the case with stuff under ~/bin) that I want synchronized, and then follow = True is in my unison profile. It happens to be that this collection of odds and ends—plus an automatically-generated text file containing every package installed on my system—is everything under ~ that needs to be backed up to a remote (rsync-over-ssh) host with client-side encryption and signing from GPG. I already believe that duplicity is the most appropriate program to do that. What isn't as clear-cut is how to make duplicity use the exact same set of files when it runs a backup; it would be simple if duplicity would follow symlinks, but it does not and the manpage lists no option for enabling any such behavior. Comparing unison's file selection algorithm to duplicity's, I don't think I can write a program that could compute a ruleset for one program given one for the other. For the record, I would rather not keep the symlinks manually synchronized with duplicity file-selection rules, as they can change thanks to the above-mentioned complications regarding ~/bin. I don't think running duplicity on the external hard disk is such a good idea either; I usually keep that hard disk unmounted and unplugged in case of a power failure or other physical problem with the computer, plus I'm not sure about duplicity's performance given that: the hard disk is NTFS-formatted in order to be useable at my Windows-imprisoned place of occupation. despite being a USB 3.0 disk, my computer has no USB 3.0 ports so it acts as a USB 2.0 disk. How can I have duplicity (or is there a better program that I have overlooked?) back up the exact same set of files that is bidirectionally synchronized with my external hard disk?

  Read the article

• How can I create an appointment on a shared Outlook calendar

  - by roryhewitt

  This isn't as basic a question as it may seem. Hence all the descriptive text... I and my team use Outlook 2007. I have my own personal calendar and also I share a calendar with others in my team (which is mainly used to notify everyone of vacations etc.). The others in my team are NOT technical people. I would like to create a shortcut or template that any of us can use to create an appointment in the shared calendar. My initial though was to create a new appointment, but rather than actually put it in the calendar, I would save it as an Outlook Template (.oft) file. Once created, I would send this to my team and tell them to put it in their Templates file and put a shortcut on their desktop. Then, if they want to put a vacation in the shared calendar, they just double-click on the shortcut, change the dates etc. and then save & close it. However, when I do that, it doesn't save the fact that it's an appointment on the shared calendar - it just adds the appointment to the team member's personal calendar. There doesn't seem to be a way to specify a calendar in the template. I've also tried this by saving the template as a .ics or .vcs file, with no better luck. Additionally, if a team member adds an appointment to the shared calendar, other 'sharees' aren't notified, unless the appointment is actually created as a meeting and the other sharees are explicitly invited. I found this online (http://office.microsoft.com/en-us/outlook-help/keep-everyone-informed-about-time-away-from-the-office-HA010209819.aspx) which APPEARS to say that what I want to do isn't built in functionality (since it shows a bunch of steps to go through. I'd PREFER not to have to add this stuff to everyone else's personal calendar directly. So... Is this possible to do, natively (i.e. directly in Outlook)? Would a Sharepoint calendar make more sense and allow this functionality? Is there a way to do what I want which will allow the other team members to be notified? Like I said, I'm looking for as simple an interface as possible - these people aren't going to want to do much more than open something and change dates. Additionally, they're probably not going to have any fancy software on their PC's, although they will be up to date with Java and (maybe) .NET frameworks. Also, before anyone gets funny, yes, this has to work with Outlook 2007, as it's a corporate standard - we're not able to change that, even though e.g. Google Calendar would do this wonderfully. Obviously if this functionality is available in Outlook 2010, then fantastic - we might be able to upgrade. Thanks!

  Read the article

• How to format and where to put the SPF TXT record?

  - by YellowSquirrel

  EDIT I think I more or less understand the syntax and, anyway, Google is giving, in the link below, the syntax needed. My question is really where to put that stuff. Should I quote every field? The whole line? :) I've set up Google apps for my domain: I've registered the domain with Google by adding the CNAME Google asked and I've apparently succesfully setup the MX Google mail servers. So far I haven't yet a dedicated server: I'm just having a domain at a registrar. Now I want to activate SPF and I'm confused. In the following short webpage: http://www.google.com/support/a/bin/answer.py?answer=178723 it is written that I must add a TXT record containing: v=spf1 include:_spf.google.com ~all Where should I enter this? Should this go in the zone (?) file, like I did for the CNAME and the MX records? So far I have something like this: @ 10800 IN A 217.42.42.42 @ 10800 IN MX 5 ASPMX3.GOOGLEMAIL.COM. @ 10800 IN MX 5 ASPMX2.GOOGLEMAIL.COM. @ 10800 IN MX 3 ALT2.ASPMX.L.GOOGLE.COM. @ 10800 IN MX 3 ALT1.ASPMX.L.GOOGLE.COM. @ 10800 IN MX 1 ASPMX.L.GOOGLE.COM. google8a70835987f31e34 10800 IN CNAME google.com. Does adding the SPF TXT record mean I should literally have something like that: @ 10800 IN A 217.42.42.42 @ 10800 IN MX 5 ASPMX3.GOOGLEMAIL.COM. @ 10800 IN MX 5 ASPMX2.GOOGLEMAIL.COM. @ 3600 IN TXT "v=spf1 include:_spf.google.com ~all" @ 10800 IN MX 3 ALT2.ASPMX.L.GOOGLE.COM. @ 10800 IN MX 3 ALT1.ASPMX.L.GOOGLE.COM. @ 10800 IN MX 1 ASPMX.L.GOOGLE.COM. google8a70835987f31e34 10800 IN CNAME google.com. I made that one up and included right in the middle to show how confused I am. What I'd like to know is the exact syntax and where/how I should put this TXT record.

  Read the article

• Why do I sometimes get 'sh: $'\302\211 ... ': command not found' in xterm/sh?

  - by amn

  Sometimes when I simply type a valid command like 'find ...', or anything really, I get back the following, which is completely unexpected and confusing (... is command name I type): sh: $'\302\211...': command not found There is some corruption going on I think. I don't use color in my prompt, I am using the Bash shell in POSIX mode as sh (chsh to /bin/sh and so on - $SHELL is sh). What is going on and why does this keep happening? Anything I can debug? I think this is more of an xterm issue than sh, or at least a combination of the two. Files, for context: My /etc/profile, as distributed with Arch Linux x86-64: # /etc/profile #Set our umask umask 022 # Set our default path PATH="/usr/local/sbin:/usr/local/bin:/usr/bin" export PATH # Load profiles from /etc/profile.d if test -d /etc/profile.d/; then for profile in /etc/profile.d/*.sh; do test -r "$profile" && . "$profile" done unset profile fi # Source global bash config if test "$PS1" && test "$BASH" && test -r /etc/bash.bashrc; then . /etc/bash.bashrc fi # Termcap is outdated, old, and crusty, kill it. unset TERMCAP # Man is much better than us at figuring this out unset MANPATH My /etc/shrc, which I created as a way to have sh parse some file on startup, when non-login shell. This is achieved using ENV variable set in /etc/environment with the line ENV=/etc/shrc: PS1='\u@\H \w \$ ' alias ls='ls -F --color' alias grep='grep -i --color' [ -f ~/.shrc ] && . ~/.shrc My ~/.profile, I am launching X when logging in through first virtual tty: [[ -z $DISPLAY && $XDG_VTNR -eq 1 ]] && exec xinit -- -dpi 111 My ~/.xinitc, as you can see I am using the system as a Virtual Box guest: xrdb -merge ~/.Xresources VBoxClient-all awesome & exec xterm And finally, my ~/.Xresources, no fancy stuff here I guess: *faceName: Inconsolata *faceSize: 10 xterm*VT100*translations: #override <Btn1Up>: select-end(PRIMARY, CLIPBOARD, CUT_BUFFER0) xterm*colorBDMode: true xterm*colorBD: #ff8000 xterm*cursorColor: S_red Since ~/.profile references among other things /etc/bash.bashrc, here is its content: # # /etc/bash.bashrc # # If not running interactively, don't do anything [[ $- != *i* ]] && return PS1='[\u@\h \W]\$ ' PS2='> ' PS3='> ' PS4='+ ' case ${TERM} in xterm*|rxvt*|Eterm|aterm|kterm|gnome*) PROMPT_COMMAND=${PROMPT_COMMAND:+$PROMPT_COMMAND; }'printf "\033]0;%s@%s:%s\007" "${USER}" "${HOSTNAME%%.*}" "${PWD/#$HOME/~}"' ;; screen) PROMPT_COMMAND=${PROMPT_COMMAND:+$PROMPT_COMMAND; }'printf "\033_%s@%s:%s\033\\" "${USER}" "${HOSTNAME%%.*}" "${PWD/#$HOME/~}"' ;; esac [ -r /usr/share/bash-completion/bash_completion ] && . /usr/share/bash-completion/bash_completion I have no idea what that case statement does, by the way, it does look a bit suspicious though, but then again, who am I to know.

  Read the article

• $PATH is driving me nuts

  - by Chris4d

  OK, apologies if this is something dumb, but I'm running out of ideas. Goal: prepend /usr/local/bin to $PATH Problem: $PATH won't do what I want or expect How I got here: I want to start learning to program, so I'm getting comfortable messing around under the hood, but don't have a lot of experience. I installed the fish shell (because it's friendly!) using homebrew and set it as my default shell (under system prefs>users & groups>advanced). At some point, I ran brew doctor to see if my installs were all kosher, and it suggested I move /usr/local/bin to the front of $PATH so that I could use my installation of git rather than the system copy. Fine - but between path_helper and fish, something was happening to $PATH that was out of my control, and I could never get the paths arranged in the right way. Environment: OSX 10.8.2, upgraded from 10.7ish, with xcode and devtools installed, plus x11, homebrew, and fish More info: I've set my user's default shell back to bash, and tried a variety of shells thru terminal.app - bash, fish, sh. I moved /usr/local/bin to the top of /etc/paths but it didn't change anything. I looked thru the various config.fish files and commented out stuff that might mess with $PATH, didn't help. I have the following files in /etc/paths.d/: ./10-homebrew containing /usr/local/bin ./20-fish containing /usr/local/Cellar/fish/1.23.1/bin ./40-XQuartz containing /opt/X11/bin I added set +x to my profile and when I start terminal.app I get: Last login: Mon Oct 1 13:31:06 on ttys000 + '[' -x /usr/libexec/path_helper ']' + eval '/usr/libexec/path_helper -s' ++ /usr/libexec/path_helper -s PATH="/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/Cellar/fish/1.23.1/bin:/opt/X11/bin"; export PATH; + '[' /bin/bash '!=' no ']' + '[' -r /etc/bashrc ']' + . /etc/bashrc ++ '[' -z '\s-\v\$ ' ']' ++ PS1='\h:\W \u\$ ' ++ shopt -s checkwinsize ++ '[' Apple_Terminal == Apple_Terminal ']' ++ '[' -z '' ']' ++ PROMPT_COMMAND='update_terminal_cwd; ' ++ update_terminal_cwd ++ local 'SEARCH= ' ++ local REPLACE=%20 ++ local PWD_URL=file://Chriss-iMac.local/Users/c4 ++ printf '\e]7;%s\a' file://Chriss-iMac.local/Users/c4 Chriss-iMac:~ c4$ So it looks like path_helper runs, but then running echo $PATH nets me /usr/bin:/bin:/usr/sbin:/sbin. So, it looks like path_helper isn't even doing what it's supposed to anymore? I'm sure there is some well-defined behavior here that I don't understand, or I borked something while trying to fix it. Please help!

  Read the article

• Too many Tunnel Adapter Interfaces

  - by Tomas Lycken

  If I open a command prompt on my machine and type ipconfig /all, I see lots of Tunnel adapter Local Area Connection* 9: Media state . . . . . . . . . . . . . : Media disconnected Connection-specific DNS Sufficx . . . : Description . . . . . . . . . . . . . : Microsoft 6to4 Adapter #5 Physical address. . . . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . . . : No Autoconfiguration Enabled . . . . . . : Yes In fact, they're so many that my "real" adapters are pushed out of the stack, and can't be seen anymore. Is there any flag I can use on ipconfig to hide all virtual interfaces? Or is there some other way around this problem? Since they always say "Media disconnected" I suppose disabling could be an option, but if possible I'd rather not turn any functionality off. I just want to control what output I get from ipconfig. Also, I know these are related to IPv6 stuff. However, most of what I find on google merely states what these are, and that they're harmless - nothing about hiding/removing them.

  Read the article

• Lighttpd with FastCGI configuration running ViewVC - rewrite problems

  - by 0xC0000022L

  At the moment I am struggling with the configuration of lighttpd together with ViewVC. The configuration was ported from Apache 2.2.x, which is still running on the machine, serving the WebDAV/SVN stuff, being proxied through. Now, the problem I am having appears to be with the rewrite rules and I'm not really sure what I am missing here. Here's my configuration (slightly condensed to keep it concise): var.hgwebfcgi = "/var/www/vcs/bin/hgweb.fcgi" var.viewvcfcgi = "/var/www/vcs/bin/wsgi/viewvc.fcgi" var.viewvcstatic = "/var/www/vcs/templates/docroot" var.vcs_errorlog = "/var/log/lighttpd/error.log" var.vcs_accesslog = "/var/log/lighttpd/access.log" $HTTP["host"] =~ "domain.tld" { $SERVER["socket"] == ":443" { protocol = "https://" ssl.engine = "enable" ssl.pemfile = "/etc/lighttpd/ssl/..." ssl.ca-file = "/etc/lighttpd/ssl/..." ssl.use-sslv2 = "disable" setenv.add-environment = ( "HTTPS" => "on" ) url.rewrite-once += ("^/mercurial$" => "/mercurial/" ) url.rewrite-once += ("^/$" => "/viewvc.fcgi" ) alias.url += ( "/viewvc-static" => var.viewvcstatic ) alias.url += ( "/robots.txt" => var.robots ) alias.url += ( "/favicon.ico" => var.favicon ) alias.url += ( "/mercurial" => var.hgwebfcgi ) alias.url += ( "/viewvc.fcgi" => var.viewvcfcgi ) $HTTP["url"] =~ "^/mercurial" { fastcgi.server += ( ".fcgi" => ( ( "bin-path" => var.hgwebfcgi, "socket" => "/tmp/hgwebdir.sock", "min-procs" => 1, "max-procs" => 5 ) ) ) } else $HTTP["url"] =~ "^/viewvc\.fcgi" { fastcgi.server += ( ".fcgi" => ( ( "bin-path" => var.viewvcfcgi, "socket" => "/tmp/viewvc.sock", "min-procs" => 1, "max-procs" => 5 ) ) ) } expire.url = ( "/viewvc-static" => "access plus 60 days" ) server.errorlog = var.vcs_errorlog accesslog.filename = var.vcs_accesslog } } Now, when I access the domain.tld, I correctly see the index of the repositories. However, when I look at the links for each respective repository (or click them, for that matter), it's of the form https://domain.tld/viewvc.fcgi/reponame instead of the intended https://domain.tld/reponame. What do I have to change/add to achieve this? Do I have to "abuse" the index file mechanism somehow? Goal is to keep the /mercurial alias functional. So far I've tried sifting through the lighttpd book from Packt again, also through the lighttpd documentation, but found nothing that seemed to match the problem.

  Read the article

• Echo 404 directly from nginx to improve performance

  - by user64204

  I am in charge of production servers serving static content for a website. Those servers are constantly being crawled by bots looking for potential exploits (which isn't that much of a problem security-wise because no application can be reached behind the web server) but generates thousands of 404 per day, sometimes per hour. I am looking into ways of blocking those requests but it's tricky (you want to make sure you don't block legitimate traffic and these bots are becoming more and more clever at looking like they're legit) and is going to take me a while to find an acceptable solution. In the meantime I would like to reduce the performance impact of serving those 404 pages. Indeed we're using nginx which by default is configured to serve it's 404 page from the disk (This can be changed using the error_page directive but in the end the 404 will either have to be served from disk or from another external source (e.g. upstream application which would be worst)) which isn't ideal. I ran a test with ab on my local machine with a basic configuration: in one case I echo a message directly from nginx so the disk isn't touched at all, in the other case I hit a missing page and nginx serves its 404 from disk. server { # [...] the default nginx stuff location / { } location /this_page_exists { echo "this page was found"; } } Here are the test results (my laptop has Intel(R) Core(TM) i7-2670QM + SSD in case you're wondering why they are so high): $ ab -n 500000 -c 1000 http://localhost/this_page_exists Requests per second: 25609.16 [#/sec] (mean) $ ab -n 500000 -c 1000 http://localhost/this_page_doesnt_exists Requests per second: 22905.72 [#/sec] (mean) As you can see, returning a value with echo is 11% ((25609-22905)÷22905×100) faster than serving the 404 page from disk. Accordingly I would like to echo a simple 404 Page not Found string from nginx. I tried many things so far but they all failed, essentially the idea was this: location / { try_files $uri @not_found; } location @not_found { echo "404 - Page not found"; } The problem is that as soon as the echo directive is used, the http response code is set to 200. I tried changing that by doing error_page 200 = 400 but that breaks the configuration. How can I serve a 404 page directly from nginx? (without hacking the source which may be might next step)

  Read the article

• Can't find windows 2000 domain after PDC Change

  - by Mark A Kruger

  This is a windows 2000 domain issue. I had an old win2000 PDC that was beginning to fail. So, trying to be pre-emptive, I installed a new BDC, then "demoted" the old PDC and took it off the network. Now it appears that no member server can "find" the domain anymore. No logins work (for services or a RDP or anything). What I've tried (based on googling): Verified sysvol is shared on all servers. Used nslookup to verify that DC's are being found. netdiag /fix meta data cleanup routines. verified no firewall issues (port 389 etc) seizing all roles to new PDC (I did that as part of the original promotion). LMHOST file and Netbios settings. At the moment it seems like I can get the DC's returned but cannot contact them. I'm at a loss. My latest attempt was to remove a member server from the domain and try to "re-add" it. When I do that I get this message: The query was for the SRV record for _ldap._tcp.dc._msdcs.cfwebtools.com The following domain controllers were identified by the query: db-dev1.cfwebtools.com file-prod1.cfwebtools.com cfwt-pdc2.cfwebtools.com However no domain controllers could be contacted. It then goes on to ask if I've checked my A record and made sure they are running. Is there a way to force this domain to be seen? I also shared sysvol (or double checked it) and restarted the dfsr service. More information. I got looking at sysvol and found it was not shared on 2 of these servers. Only one of them (db-dev1) has a "good" or at least "populated" sys vol store. So I tried doing a "d2" recovery of my PDC against that good sysvol. But it never synchs - or at least it does not seem to synch. I'm guessing if I could get sysvol and netlogin to kick in and replicate that would fix my issue. I think these DC's aren't responding because they are waiting for replication which is broken somehow. Would taking down all the DC's except for db-dev1 fix the issue - at least temporarily? I know I can't just copy the sysvol stuff over to the other 2 can I?

  Read the article

• Apache returns 403 Forbidden for alternative port vhost

  - by Wesley

  I'm having an issue getting vhosts to work on Apache 2.2, Debian 6. I have two VirtualHosts, one on port 80 and one on port 8888. The port 80 one has been created automatically by DirectAdmin, the 8888 is a custom one. It's configuration is as follows. <VirtualHost *:8888 > DocumentRoot /home/user/public_html/development ServerName www.myserver.nl ServerAlias myserver.nl <Directory "/home/user/public_html/development"> Options +Indexes +FollowSymLinks +MultiViews AllowOverride All Order Allow,deny Allow from all </Directory> </VirtualHost> Of course I also have a NameVirtualHost *:8888 The port 80 DocumentRoot is /home/user/public_html/production, which is perfectly accessible and works like a charm. The port 8888 docroot of /home/user/public_html/development is 403 forbidden though. I have compared the permissions for both folders. They seem fine to me. drwxr-xr-x 2 root root 4096 Aug 17 16:14 development drwxr-xr-x 4 root root 4096 Aug 18 04:29 production Also, the index.php file which is supposed to display when accessing through port 8888, located in /development/: -rwxr-xr-x 1 root root 41 Aug 17 16:14 index.html I have looked at my error_log and found many of the following entries, only being added to the log file when accessing through port 8888. [Sat Aug 18 04:35:09 2012] [error] [client 27.32.156.232] Symbolic link not allowed or link target not accessible: /home/user/public_html /home/user/public_html is a symbolic link that refers to /home/user/domains/mydomain/public_html. The symbolic link has the following permissions: lrwxrwxrwx 1 admin admin 29 Aug 17 15:56 public_html -> ./domains/mydomain/public_html I'm at a loss. It seems that everything is readable or executable. I've set the Directory to FollowSymLinks in the httpd.conf file, but that doesn't seem to make a difference. If I change that directory tag to <Directory "/home/admin/public_html"> (so it has FollowSymLinks on that as well) it still does not work. Any help is greatly appreciated. If I need to post more information, let me know. I'm pretty much a beginner at this stuff. .. .. UPDATE: I ended up changing the configuration to directly go to the actual path of the files, avoiding the public_html symlink altogether. That worked. Thanks for the suggestions folks. DocumentRoot /home/user/domains/mydomain/public_html/development instead of DocumentRoot /home/user/public_html/development

  Read the article

• Model M Keyboard inputs incorrect characters after logging in to Fedora

  - by mickburkejnr

  I recently bought a 24 year old IBM Model M keyboard. From what I gather, it'd been left on a shelf for the last 5 years, so you can imagine the amount of dust dirt and crap that was on it. Before cleaning it, I plugged it in to my laptop (running Fedora 17) using a PS/2 to USB adapter. What I found was, while it still works, the keys I press don't correspond to what is displayed on the screen. So for example, when I type S on the keyboard, I get ß display on the screen instead. At the time, I put this down to the adapter not working properly. Since then, I stripped the keys off the keyboard and cleaned the whole thing. It looks like it's just come out of a box! I then plugged it in to my computer (also running Fedora 17) via a standard PS/2 plug. The computer loaded up to the login screen, and I typed in my password. Pressed enter, and I logged straight in to my machine. At this point, I opened up a text editor and started typing some stuff. To my horror, the keystrokes I was entering weren't coming up as intended. What came up instead were characters that would map to the pressed key but only under a different keyboard language setting. I opened up a program to see what keyboard language had been selected, and the correct one for the keyboard was selected (which is UK in my case). I opened up a window that would show what characters mapped to what keys, and I pressed every single key on the keyboard, and every corresponding block representing each key lit up. I went back to the text editor to try again, but I was still getting these random characters. Whats more is that the backspace key would not work, although in the other utility it would flash when pressed. What I know is that at the login screen the keyboard must have entered the correct characters, otherwise I wouldn't have been able to log in. Further more, keys that don't respond while using a text editor as sending signals to the computer, as illustrated in that keyboard utility. The question is why random characters are displayed when they really shouldn't be? Would this be a hardware fault or a software issue?

  Read the article

• Create and manage child name servers (glue records) within my domain?

  - by basilmir

  Preface I use a top level domain provider that only allows me to add "normal" third-party name servers (a list where i can add "ns1.hostingcompany.com" type entries... nothing else) AND "child name servers" which i can later attach to my parent account ( ns1.myowndomain.com and an ip address). They do not provide other means of linking up. I want to host my own server and dns, even with just one name server (at first). My setup: Airport Extreme - get's a static ip address from my ISP Mac Mini Server - sits behind the Airport and get's a 10.0.1.2 My problem is that i can't seem to configure DNS correctly. I added a "child nameserver" with my airport's external static ip address at the top level provider, so to my understanding i should have all DNS traffic redirected to my Airport. I've opened port 53 UDP to let the traffic in. Now, what i don't get is this. My Mini Server is sitting on a 10.0.1.2 address and i have setup dns correctly, with an A record to point and resolve my server AND a reverse lookup to that 10.0.1.2. So it's ok for "internal stuff". Here is the clicker... How, when a request comes from the exterior for a reverse lookup, does the server "know" ... well look i have everything in 10.0.1.2 but the guy outside needs something from my real address. I can't begin to describe the MX record bonanza... How do i set this "right"? Do i "need" my Mini Server to sit on the external address directly (i can see how this could be the preferred solution, being close to a "real" server i have in my mind). If not... do i need a PTR record on the 10.0.1.2 server but with the external address in there? My dream: I will extend this "setup" with multiple Mini's in different cities where i work. I want a distributed something (Xgrid comes to mind). PS. Be gentle, i've read 2 books and the subject, and bought both the Lynda Essentials and DNS and Networking to boot, still i'm far from being on top of things.

  Read the article

• PHP `virtual()` with Apache MultiViews not working after upgrade to Ubuntu 12.04

  - by Izzy

  I use PHP's virtual() directive quite a lot on one of my sites, including central elements. This worked fine for the last ~10 years -- but after upgrading (or rather moving, as it is on a new machine) to Ubuntu 12.04 it somehow got broken. Example setup (simplified) To make it easier to understand, I simplify some things (contents). So say I need a HTML fragment like <P>For further instructions, please look <A HREF='foobar'>here</P> in multiple pages. 10 years ago, I used SSI for that, so it is put into a file in a central place -- so if e.g. the targeted URL changes, I only need to update it in one place. To serve multiple languages, I have Apache's MultiViews enabled -- and at $DOCUMENT_ROOT/central/ there are the files: foobar.html (English variant, and the default) foobar.html.de (German variant). Now in the PHP code, I simply placed: <? virtual("/central/foobar"); ?> and let Apache take care to deliver the correct language variant. The problem As said, this worked fine for about 10 years: German visitors got the German variant, all others the English (depending on their preferred language). But after upgrading to Ubuntu 12.04, it no longer worked: Either nothing was delivered from the virtual() command, or (in connection with framesets) it even ended up in binary gibberish. Trying to figure out what happens, I played with a lot of things. I first thought MultiViews was (somehow) not available anymore -- but calling http://<server>/central/foobar showed the right variant, depending on the configured language preferences. This also proved there was nothing wrong with file permissions. The error.log gave no clues either (no error message thrown). Finally, just as a "last ressort", I changed the PHP command to <? virtual("central/foobar.html"); ?> -- and that very same file was in fact included. So PHP's virtual() function basically worked -- but the language dependend stuff obviously did no longer work together with it as it did before. Of course I tried to find some change (most likely in PHP's virtual() command), using Google a lot, and also searching the questions here -- unfortunately to no avail. Finally: The question Putting "design questions" aside (surely today I would design things differently -- but at least currently I miss the time to change that for a quite huge amount of pages): What can be done to make it work again? I surely missed something -- but I cannot figure out what...

  Read the article

• Single domain name potentially resolving to multiple servers

  - by Jace

  first time here at Server Fault, and I apologize in advance that this domain stuff is not really my strength. Any and all suggestions are much appreciated. I am completely lost and incredibly tired! I've inherited an incredibly convoluted system from my predecessor, and I'm trying to find a way to solve it - or I need to be told that it just isn't possible. I've got an old site on ServerA (some kind of Linux distribution), with the domain SomeDomain.com There is a new site sitting on ServerB (Ubuntu), with the intention of having SomeDomain.com to serve it in the future (it is replacing the old site) ServerA also has a web app that is currently in use by other departments within the company (accessible at SomeDomain.com/web-app/) The goal: To have SomeDomain.com and all extensions of this domain name (sub-domains, URL's etc.) serve the new site on ServerB. BUT, the URL SomeDomain.com/web-app/ must serve the Web App on ServerA. The Catch: The ServerA is a shared server with a hosting company with VERY limiting restrictions in place - I cannot adjust DNS settings (apart from Name servers - but cannot set A records or anything, I have full access to ServerB to do as I wish). Therefore the web-app MUST be served from SomeDomain.com/web-app/ and not from a sub-domain or anything. These limitations make migrating the web-app from Server A to Server B rather undesirable, AND this web-app will be replaced in the near future, so it isn't worth the effort right now. Therefore, ultimately I will want 1 domain name to resolve to Server B's IP address most of the time, but in the event that the URL is SomeDomain.com/web-app/, it should resolve to Server A's IP. Note: The domain names don't, technically, have to resolve to one IP or another - but ultimately the URL's must stay consistent Some things I have tried: I've looked into mod_rewrite and .htaccess to try and achieve this effect, but it doesn't look like it's going to work for me - but I may have done it wrong (On Server B, I just checked if the request URI was /web-app/ and tried to serve the /web-app/ folder on Server A) I do have the ability to modify the name servers on both servers I am not able to make a sub domain on Server A that points back to Server A (I assume because the hosting company's servers use the URL to determine what site the serve). I figured this could be good as I'd could set an A record on Server B to point to the web app on Server A - but alas, Server A requires SomeDomain.com. If there is any more information I can give, please let me know. I need a nudge in the right direction, ideas or a solution.

  Read the article

• PC will POST whenever feels likes it

  - by kyrpas

  I'm really sick of my PC and I'd love to throw it off the 5th floor but unfortunately I don't have this luxury right now. The issues started when I moved to a new house about 2 months ago. I didn't have this problem before. Case: Arctic Cooling Silentium T1 with embedded Fusion 550 Eco 80 PSU. M/B: ASRock A790GMH/128M Gfx: ATI Radeon HD 5770 Here's what's happening almost on a daily basis: I wake up in the morning, switch on the PC and all the fans start spinning. 9/10 the graphics fan stays on 100% and I know it won't post. If I'm lucky, ATI's fan stays on full power for a second, then goes back to normal and I get a normal post but that doesn't happen often. No, instead it's just drives me crazy. When I get no POST I'm trying a lot of different things and what bothers me the most is that they all work. But not always. No... That way I could find out what the hell is going on and we don't want that.. right? So, sometimes it manages to POST if I: remove the keyboard remove the power cable for a few minutes remove the graphics card remove the HDD cables do nothing, just turn it on and off a few times Sometimes it doesn't POST even if I do all of the above. And I end up removing all power cables from the M/B, and connecting all the stuff one by one. Sometimes it works, sometimes it doesn't and I just have to pray and wait. What the hell is that? I'm getting pissed of again just thinking about it. The only solution is to leave it on 24/7 but I don't want to do that. It should be able to turn on and off when I press the power button. I'm not asking much. I'm starting to think there's some weird electricity/power issue but I really don't understand what it is. There's no logical explanation about it. At least I can't find one. Any ideas?

  Read the article

• What would cause my SendMail server not to acknowledge receiving a TCP Sequence?

  - by Mike B

  My TCP/IP Stack knowledge is a little rusty so please bear with me.... I have a CentOS 5.7 server with SendMail and am having seeing intermittent timeout issues sending email (particularly larger email) to other remote domains. It doesn't happen with all attachments or recipient domains. Just some. After some extended troubleshooting, I think I've narrowed it down to TCP Sequences not being acknowledged. Here's a breakdown of the TCP session from a packet capture I collected directly on my MTA (fooMTA): Packet 1 - 11: Standard TCP handshake followed by initial SMTP conversation. No errors. Packet #12 Recipient MTA: TCP sequence 231. Ack 91. Packet #13 FooMTA: TCP sequence 91. Ack 305. Packet #14 FooMTA: TCP sequence 1115. Ack 305. Packet #15 Recipient MTA: TCP sequence 305. Ack 2495. Packet #16 FooMTA: TCP sequence 2495. Ack 305. Packet #17 FooMTA: TCP sequence 5255. Ack 305. Packet #18: Recipient MTA: TCP sequence 305. Ack 5255. Packet #19: FooMTA: TCP sequence 6635. Ack 305. Packet #20: FooMTA: TCP sequence 8015. Ack 305. Packet #21: Recipient MTA: TCP Sequence 305. Ack 8015. Packet #22: FooMTA: TCP Sequence 10775. Ack 305. Packet #23: FooMTA: TCP Sequence 13535. Ack 305. Packet #24: Recipient MTA: TCP sequence 305. Ack 10775 Packet #25: FooMTA: TCP Sequence 14915. Ack 305 It keeps going like this with my server still thinking it hasn’t received sequence 305… in response the remote side eventually retransmits its prior data thinking that it never arrived. Eventually the gap gets so large that no new data is sent and the remote MTA keeps retransmitting old stuff. This contributes to an exponential backoff and eventually the remote side gives up. What’s strange to me is that I see the “missing” TCP sequence (305 in this case) arriving back to my server (via a packet capture collected directly from fooMTA) So I don’t get why my server keeps asking for it. Could this be firewall related? What would be the next step in troubleshooting?

  Read the article

• 20GB+ worth of emails in my /home what is a better solution for that?

  - by Skinkie

  My email storage requirements are outgrowing anything reasonable with respect to local mail storage. As we speak 99% of my home partition is filled with personal mail in Thunderbirds mail dirs. Needless to say, this is just painful, badly searchable and as history has proven me that backups work, but Thunderbird is capable of loosing a lot of mail very easily. Currently I have an remote IMAPS server (Dovecot) running for my daily mail, accessible from anywhere, which from my own practice works efficiently up to about 1000 emails. Then some archive directories should be used to move mail around. I have been looking into DBMail, but I wonder if I make my case worse or better which such solution. None of the supported database employ string deduplication or string compression out of the box, so is this going to help me with 20GB+ mail? What about falling back to a plain old IMAP server? A filesystem like ZFS would support stuff like GZIP transparently, which could help. Could someone share their thoughts? The 20GB mostly consists of mailinglists, and normal mail. Not things like attachments. To add some clarifications; As we speak, my mail is not server side indexed at all - only my new mail arrives at a remote IMAP server. It is all local storage from former POP3 accounts, local mirrored Gmail and IMAP accounts. In my perspective it is not Thunderbird that sucks, its fileformat that sucks. Regarding the 1000 mails. On the road I am using Alpine and MobileMail, quite happy with both of them, but some management is required to actually manage the mail. Sieve helps a lot with that, but browing through 10.000 e-mails is not fun, especially not on a mobile client. I am quite happy with Dovecot, never had any issues with it. I just wonder if this is the way to go. Or if there are any other better solutions. What my question is: what is the best practice solution that allows 20GB+ mails and is -on demand remotely accessible, easy to backup and archive worthy. It doesn't need to be available 24x7. The final approach I took was installing a local IMAP server (Dovecot), configured it for being my archive, using the following guide: http://en.gentoo-wiki.com/wiki/Dovecot/InstallThunderbird

  Read the article

• Cooling Server Rack with Water? Sensible? Reuse energy for small installation?

  - by TomTom

  First - this is not a shopping question, this is not so much about concrete prices but about general feasibility. Makes no sense to get looking fo ra manufacturer it the approach is bad. I am moving my company to new Offices in September, and among them we will expand and consolidate our number crunch cluster. It is so far in a data center. I have a nice room in the basement prepared now. I think about cooling. We will likely run up a power usage of around 10kw by end of the year. That is a LOT of stuff, and cooling will be expensive. I am located in south Poland, close to the German border. This is an area where water is available for relatively cheap price - "wasting water" is not a concern here. My situation is thus a lot different for example than in Spain ;) Physics tells me that to heat 1 liter of water by 1 degree I use 1 Calorie (1KCal), and a kwh power is (and we can assume 100% efficiency - water heaters are pretty efficient) 750 Calories. That means that 1 KWH is 750 liter by 1 degree. 10kw and a 20 degree heat would mean that per hour I need 375 liters. That is 6.25 liters per minute and not WHAT much ;) We talk 270 cubic meters here. Even in summer, the significant underground pipes really cool down the water a LOT more ;) Question: This such an approach feasible? Anyone done that? We talk of a 10kw installation for now. Is it feasible to reuse that heat? The alternative is a decent cooling system that WILL use around 2.5kwh for running. Dropping the water would basically (a) get me a quite cold input compared to the outside air even in summer (I.e. a lower temperature medium to drop the heat in) and (b) replace the need to actually have the outside cooling (which may b problematic - if the air is 22 degree, that is a LOT to fight off, but OTOH the water will be quite cold). I also would possibly save the investment for the outside part of the cooling circuit. Now, second question - is there a feasible way to heat a house with that? ;) After all, brutally speaking, it is a LOT of energy in that water ;) If it is a bad idea, I stop here - if it is not, I start looking for suppliers. Maybe my math is wrong?

  Read the article

• Apache certificates for some urls not working

  - by Vegaasen

  We are having a rather strange problem with a Apache-installation. Here is a short summary: Currently I'm setting up Apache with https, and server-certificates. This is fairly easy and works straight out of the box - as expected. This is the configuration for this setup: Listen 443 SSLEngine on SSLCertificateFile "/progs/apache/ssl/example-site.no.pem" SSLCertificateKeyFile "/progs/apache/ssl/example-site.no.key" SSLCACertificateFile "/progs/apache/ssl/ca/example_root.pem" SSLCADNRequestFile "/progs/apache/ssl/ca/example_intermediate.pem" SSLVerifyClient none SSLVerifyDepth 3 SSLOptions +StdEnvVars +ExportCertData RequestHeader set ssl-ClientCert-Subject-CN "%{SSL_CLIENT_S_DN}s" RewriteEngine On ProxyPreserveHost On ProxyRequests On SSLProxyEngine On ... <LocationMatch /secureStuff/$> SSLVerifyClient require Order deny,allow Allow from All </LocationMatch> ... <Proxy balancer://exBalancer> Header add Set-Cookie "EX_ROUTE=EB.%{BALANCER_WORKER_ROUTE}e; path=/" env=BALANCER_ROUTE_CHANGED BalancerMember http://10.0.0.1:7200 route=ee1 retry=300 flushpackets=off keepalive=on BalancerMember http://10.0.0.2:7200 route=ee2 retry=300 flushpackets=off keepalive=on status=+H ProxySet stickysession=EX_ROUTE scolonpathdelim=Off timeout=10 nofailover=off failonstatus=505 maxattempts=1 lbmethod=bybusyness Order deny,allow Allow from all </Proxy> RewriteCond %{REQUEST_URI} !^/index.html [NC] RewriteRule ^/(.*)$ balancer://exBalancer/$1 [P,NC] ProxyPassReverse / balancer://exBalancer/ Header edit Set-Cookie "(.*)" "$1;HttpsOnly" ... So - everything works fine and as expected for all of the pages that are not a part of the LocationMatch-directive. When requesting something that matches the LocationMatch-directive, I'm asked for a certificate (hence the SSLVerifyClient required attribute) - and getting all the correct certificates in my browser that is based on the root/intermediate chain. After choosing a certificate and clicking "OK", this is what pops up in the apache logs: [ssl:info] [pid 9530:tid 25] [client :43357] AH01998: Connection closed to child 86 with abortive shutdown ( [Thu Oct 11 09:27:36.221876 2012] [ssl:debug] [pid 9530:tid 25] ssl_engine_io.c(1171): (70014)End of file found: [client 10.235.128.55:45846] AH02007: SSL handshake interrupted by system [Hint: Stop button pressed in browser?!] And this just spams the logs. What is happening here? I can see this configuration working on my local machine, but not on one of our servers. There is no configration differences between the servers, only minor application-wise-changes. I've tried the following: 1) Removing CA-certificate-checking (works) 2) Adding required CA-certificate for the whole site (works) 3) Adding "SSLVerifyClient optional" does not work 4) ++ Server/Application Information Local: -OpenSSL v.1.0.1x -Apache 2.4.3 -Ubuntu -mpm: event -every configuration should be turned on (failing) server: -OpenSSL 0.9.8e -Apache 2.4.2 -SunOS -mpm: worker -every configuration should be turned on Please let me know if more information is needed, I'll provide it instantly. Brief sum-up: -Running apache 2.4 -Server certificates works just fine -Client certificates for some /Locations does not work, fails with errors PS: Could it be related with the OpenSSL version and the "Renegotiation" stuff related to TLS/SSLv3?

  Read the article

• Why can't we reach some (but not all) external web service via VPN connection?

  - by Paul Haldane

  At work (UK university) we use a set of Windows servers running WS2008R2 and RRAS which offer VPN service to students in our accommodation. We do this to associate the network connections with individuals. Before they've connected to the VPN all they can talk to is the stuff thats needed to setup the VPN and a local web site with documentation on how to connect. Medium term we'll probably replace this but it's what we're using at the moment. VPN on the 2008 servers allocates client a private (10.x) address. Access to external sites is through NAT on the campus routers (same as any other directly connected client on a private address). Non-VPN connections aren't seeing this problem. Older servers run WS 2003 and ISA2004. That setup works but has become unreliable under load. Big difference there was that we were allocating non-RFC1918 addresses to the clients (so no NAT required). Behaviour we're seeing is that once connected to the VPN, clients can reach local web sites (that is sites on the campus network) but only some external sites. It seems (but this may be chance) that the sites we can reach are Google ones (including YouTube). We certainly have trouble reaching Microsoft's Office 365 service (which is a pain because that's where mail for most of our students is). One odd bit of behaviour is that clients can fetch (using wget on a Windows 7 client) http://www.oracle.com/ (which gets a 301 redirect) but hangs when asked to fetch http://www.oracle.com/index.html (which is what the first URL redirects to). Access works reliably if we configure clients to use our local web proxies (Squid). My gut tells me that this is likely to be something in the chain dropping replies either based on HTTP inspection or the IP address in the reply. However I'm puzzled about why we're seeing this with the VPN clients. Plan for tomorrow (when I'm back in the office) is to setup a web server on external connection so that we can monitor behaviour at both ends of the conversation (hoping that the problem manifests itself with our test server). Any suggestions for things we should be looking at?

  Read the article

• NGINX SSL Certificate Not Working

  - by LeSamAdmin

  I've been working on SSL stuff and getting nowhere from like 4 tutorials... I've bought an SSL for pingrglobe.com, and now trying to apply it to my servers. Here's my nginx code: http { server { listen 80; server_name pingrglobe.com; rewrite ^(.*) http://www.pingrglobe.com$1 permanent; } server { listen 443; ssl on; ssl_certificate /etc/nginx/ssl/pingrglobe.crt; ssl_certificate_key /etc/nginx/ssl/pingrglobe.key; #enables SSLv3/TLSv1, but not SSLv2 which is weak and should no longer be used. ssl_protocols SSLv3 TLSv1; #Disables all weak ciphers ssl_ciphers ALL:!aNULL:!ADH:!eNULL:!LOW:!EXP:RC4+RSA:+HIGH:+MEDIUM; server_name www.pingrglobe.com; root /var/www/pingrglobe.com; index index.html index.php; location / { try_files $uri $uri/ @extensionless-php; add_header Access-Control-Allow-Origin *; } rewrite ^/blog/blogpost/(.+)$ /blog/blogpost?post=$1 last; rewrite ^/viewticket/(.+)/(.*)$ /viewticket?tid=$1&$2 last; rewrite ^/vemail/(.+)$ /vemail?eid=$1 last; rewrite ^/serversettings/(.+)$ /serversettings?srvid=$1 last; rewrite ^/notification/(.+)$ /notification?id=$1 last; rewrite ^/viewreport/(.+)$ /viewreport?srvid=$1 last; rewrite ^/removeserver/(.+)$ /removeserver?srvid=$1 last; rewrite ^/staffviewticket/(.+)/(.*)$ /staffviewticket?tid=$1&$2 last; rewrite ^/activate/(.*)/(.*)/(.*)$ /activate?user=$1&code=$2&email=$3 last; rewrite ^/activate2/(.*)/(.*)/(.*)$ /activate2?user=$1&code=$2&email=$3 last; rewrite ^/passwordtoken/(.+)/(.*)/(.*)$ /passwordtoken?user=$1&token=$2&email=$3 last; location ~ \.php$ { try_files $uri =404; fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } location @extensionless-php { rewrite ^(.*)$ $1.php last; } location ~ /\. { deny all; } } } SSL doesn't work as you see here: https://www.pingrglobe.com

  Read the article

• Lenovo Windows 8 EFI restore from image

  - by anderhil

  First time here. I have bought e530 with windows 8 and the first hour of work with it i have a problem. I have ssd with windows 7 which i want to use with my new e530. I have made a sysprep of win 7 and installed ssd to the e530. The HDD which was inside e530 i want to use as second hdd instead of my DVD Drive. I connected this HDD through usb-to-sata adapter to copy some files from ssd to the hdd. Unfortunately it didn't see the file system on the HDD (but first time i have booted to it and first boot into Windows 8) I've made some mistakes and i corrupt the filesystem on the hdd. I tried bunch of tricks to recover the GPT, but it didn't work. I have managed to recover the Lenovo_Recovery partition to my ssd using recovery tools. And now I'm stuck, with this new things to me - EFI, GPT, etc i don't how this stuff works, and i have been trying to understand this for hours - but nothing seems to work. I want to restore the Windows 8 to the hdd, so it is there alive. What i have done so far: Formated the HDD I took the PBRALL file from the Lenovo_Recovery " convert gpt create partition Primary size=1000 ID=DE94BBA4-06D1-4D40-A16A-BFD50179D6AC gpt attributes=0x8000000000000001 assign letter=W format quick LABEL=WINRE_DRV create partition efi size=260 assign letter=s format quick fs=fat32 LABEL=SYSTEM_DRV create par msr size=128 create partition primary noerr assign letter=t format quick LABEL=Windows8_OS shrink desired=12197 create partition Primary ID=DE94BBA4-06D1-4D40-A16A-BFD50179D6AC gpt attributes=0x8000000000000001 assign letter=q format quick LABEL=Lenovo_Recovery " it recreated the partitions copied contents of SDRIVE.zip to SYSTEM_DRV partition copied contents of WDRIVE.zip to WINRE_DRV partition Copied restored Lenovo_Recovery back to Lenovo_Recovery partition So now I have 3 system partitions: SYSTE_DRV BOOT boot.sdi EFI BOOT bootx64.efi LenovoBT.efi Lenovo ... Microsoft ... WINRE_DRV\Recovery\WindowsRE\winre.wim Lenovo_Recovery (whic contains install.wim and bunch of other things) So i put back the HDD inside the laptop and tried to boot - but nothing works. It just doesn't boot to anything - no errors - nothing at all. When I choose this HDD manually for boot - just black screen blinks and that's all - it returns back to the devices boot menu. SYSTEM_DRV is EFI partition, so I don't understand why it doesn't boot, it has files needed inside. Can anybody tell me what should be done to make it boot to recovery console or smth like that? How to restore the Windows 8 from the Lenovo_Recovery install.wim image? As I understand I have all the files where they should be, but why it doesn't work? How to troubleshoot such things? Also, if somebody has good link where EFI booting process is explained in details that would be great. Cause i still don't understand how it knows what partition to boot?

  Read the article

• Heroku Problem During Database Pull of Rails App: Mysql::Error MySQL server has gone away

  - by Rich Apodaca

  Attempting to pull my database from Heroku gives an error partway through the process (below). Using: Snow Leopard; heroku-1.8.2; taps-0.2.26; rails-2.3.5; mysql-5.1.42. Database is smallish, as you can see from the error message. Heroku tech support says it's a problem on my system, but offers nothing in the way of how to solve it. I've seen the issue reported before - for example here. How can I get around this problem? The error: $ heroku db:pull Auto-detected local database: mysql://[...]@localhost/[...]?encoding=utf8 Receiving schema Receiving data 17 tables, 9,609 records [...] /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/adapters/mysql.rb:166:in `query': Mysql::Error MySQL server has gone away (Sequel::DatabaseError) from /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/adapters/mysql.rb:166:in `_execute' from /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/adapters/mysql.rb:125:in `execute' from /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/connection_pool.rb:101:in `hold' from /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/database.rb:461:in `synchronize' from /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/adapters/mysql.rb:125:in `execute' from /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/database.rb:296:in `execute_dui' from /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/dataset.rb:276:in `execute_dui' from /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/adapters/mysql.rb:365:in `execute_dui' from /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/dataset/convenience.rb:126:in `import' from /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/dataset/convenience.rb:126:in `each' from /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/dataset/convenience.rb:126:in `import' from /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/adapters/mysql.rb:144:in `transaction' from /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/connection_pool.rb:108:in `hold' from /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/database.rb:461:in `synchronize' from /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/adapters/mysql.rb:138:in `transaction' from /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/dataset/convenience.rb:126:in `import' from /Library/Ruby/Gems/1.8/gems/taps-0.2.26/lib/taps/client_session.rb:211:in `cmd_receive_data' from /Library/Ruby/Gems/1.8/gems/taps-0.2.26/lib/taps/client_session.rb:203:in `loop' from /Library/Ruby/Gems/1.8/gems/taps-0.2.26/lib/taps/client_session.rb:203:in `cmd_receive_data' from /Library/Ruby/Gems/1.8/gems/taps-0.2.26/lib/taps/client_session.rb:196:in `each' from /Library/Ruby/Gems/1.8/gems/taps-0.2.26/lib/taps/client_session.rb:196:in `cmd_receive_data' from /Library/Ruby/Gems/1.8/gems/taps-0.2.26/lib/taps/client_session.rb:175:in `cmd_receive' from /Library/Ruby/Gems/1.8/gems/heroku-1.8.2/bin/../lib/heroku/commands/db.rb:17:in `pull' from /Library/Ruby/Gems/1.8/gems/heroku-1.8.2/bin/../lib/heroku/commands/db.rb:119:in `taps_client' from /Library/Ruby/Gems/1.8/gems/taps-0.2.26/lib/taps/client_session.rb:21:in `start' from /Library/Ruby/Gems/1.8/gems/heroku-1.8.2/bin/../lib/heroku/commands/db.rb:115:in `taps_client' from /Library/Ruby/Gems/1.8/gems/heroku-1.8.2/bin/../lib/heroku/commands/db.rb:16:in `pull' from /Library/Ruby/Gems/1.8/gems/heroku-1.8.2/bin/../lib/heroku/command.rb:45:in `send' from /Library/Ruby/Gems/1.8/gems/heroku-1.8.2/bin/../lib/heroku/command.rb:45:in `run_internal' from /Library/Ruby/Gems/1.8/gems/heroku-1.8.2/bin/../lib/heroku/command.rb:17:in `run' from /Library/Ruby/Gems/1.8/gems/heroku-1.8.2/bin/heroku:14 from /usr/bin/heroku:19:in `load' from /usr/bin/heroku:19

  Read the article

< Previous Page | 423 424 425 426 427 428 429 430 431 432 433 434  | Next Page >