Search Results

Search found 14148 results on 566 pages for '2008'.

Page 428/566 | < Previous Page | 424 425 426 427 428 429 430 431 432 433 434 435  | Next Page >

• Windows Virtual Machine ping reply fails the first few times

  - by user28471

  I am running a windows Web Server 2008 virtual machine. When I try to ping it from another windows machine the ping reply comes straight back with 100% success. But when I try to ping it from one of the Linux boxes, the ping reply fails with partial or 100% loss the first couple of time and succeeds the third time onwards. I know it is quite strange but can any one think anything that could be causing it. Could anything in the Windows Domain Security or Firewall be "taking time" to allow responding to the ping request? In fact even the firewall is turned off on the virtual machine.

  Read the article

• Why is it taking longer to log into windows7?

  - by acidzombie24

  I installed windows 7 and it was file for weeks. Recently i created a 2nd user account, installed important updates, installed 1 game and AFAIK that is it. What did it? All three of theses doesnt seem they would cause logging in to take longer (maybe important updates did it?). It takes 90+ seconds to get a fully loaded desktop when it use to take ~30 second. Looking at msconfig and starup i see vmware, dtools, launchy and live messenger (msn). I know i had three of these and maybe all 4 during the last install how can i find out what made loggin in slow? -edit- i also installed visual studios rc1 team instead of beta2 and msvs 2008. But i hardly doubt msvs rc1 did it.

  Read the article

• Duplicate of IPSEC certificate template not displaying

  - by Tim Brigham

  I am working on getting IPSEC working on computers outside my domain. I am unable to get a duplicate of the IPSec Offline Request template to show on the web interface. My CA is 2008 R2 Enterprise and the permissions on the template should be adequate to allow me access (my account has read and enroll). If I publish the original template it functions as desired. I also have other custom templates in use (although using autoenrollment). The duplicate is almost identical to the original, excepting that it has a longer validity period and the private key is marked as exportable. How do I debug at this point?

  Read the article

• Laptop connectd to 2 VPNs (1st for Internet over WiFi, 2nd to access shared folders on another network) is failing to route traffic over 2nd VPN

  - by Triynko

  I set up a VPN on Windows Server 2008 through its routing and remote access services. I connected to the VPN, and configured the client to allow for split tunneling (Internet traffic goes to my default gateway, and traffic directed to the VPN server goes through the VPN gateway). I had to adjust the routing table, adding an entry to ensure traffic to my VPN server goes through the tunnel by running the command "route add [VPN.IP] mask 255.255.255.255 [VPN.GATEWAY.IP] IF [VPN_INTERFACE_#]". Adding the correct route makes everything work flawlessly on all my machines, except for one. The problematic machine is a laptop that's not directly connected to a network. It connects to WiFi, and then connects to a VPN to obtain internet access. Finally, it connects to the target VPN server for file sharing. The "route add" trick doesn't work for that laptop, I'm assuming because it's connected to two VPNs, and I'm getting the routing wrong. Can anyone familiar with routing explain what routes I may need to add?

  Read the article

• Why do I need to add my application pool identity to the IIS_IUSRS group?

  - by smcolligan

  I'm setting up a .NET v4.0 web application on a Windows 2008 R2/IIS 7.5 server that uses a domain account for the application pool identity. When I access the site, I get the following error: The current identity () does not have write access to 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files' According to this: http://learn.iis.net/page.aspx/140/understanding-built-in-user-and-group-accounts-in-iis/ the identity of the worker process is added to the IIS_IUSRS group when the process starts. This seems to work fine for the existing .NET v2.0 applications I have running on the same server (I have not had to add their domain account application pool identities to IIS_IUSRS group). This does not seem to be the case for the first .NET v4.0 web application I'm setting up. Once I add the identity to the group, everything works fine. I suspect something is not configured correctly that is forcing me to do this. I would like to understand this before rolling out more sites/servers. Thanks in advance for your help...

  Read the article

• Two VPN connections from the same IP address

  - by Tayles

  I have set up a server running Windows Server 2008 which two remote users can dial into using a VPN connection. It works fine unless they are both in the same location, in which case only one of them can connect. I understand this is because the PPTP protocol cannot cope with two VPN connections from the same IP address. Is this correct? If so, what can I do about it? Please note that the remote location in question is a serviced office, so we're not in a position to change or play around with their router. Thanks!

  Read the article

• WSS 3.0 fails to hide quick launch items for which the current user does not have access

  - by Nils

  I'm running a Small Business Server 2008 with Windows Sharepoint Services 3.0 (WSS 3.0). I thought WSS was supposed to hide menu items for which the current logged in user don't have access? Apparently, all users can see all links, regardless of whether they have access. This applies to both links to newly created sub-sites as well as document libraries/lists. Is this expected behaviour, or is there a misconfiguration somewhere that causes the links to stay visible even for users without access? Thanks!

  Read the article

• Problem accessing MICROSOFT##SSEE database (Error: 18456, Severity: 14, State: 16.)

  - by Philipp Schmid

  After an unexpected server shutdown due to a power failure, I can no longer connect to the internal windows database MICROSOFT##SSEE which is hosting Central Admin for my SBS 2008 server. The log shows: Error: 18456, Severity: 14, State: 16. Login failed for user 'NT AUTHORITY\NETWORK SERVICE'. [CLIENT: <named pipe>] I've tried to connect using the SQL Management studio (connecting to .pipemssql$microsoft##sseesqlquery) but no luck. The SQL Server Configuration Manager doesn't show a entry for 'Protocols for MICROSOFT##SSEE' (but shows it for 2 other database hosted on the same SQL server 2005 Express edition. I have tried to restore the master.ldf and mastlog.log files from a backup, but the issue persists.

  Read the article

• Install new version of running app using MSI

  - by Uwe

  We run a x-copy deployed .net application on our Windows 2008 R2 terminal server. If I want to deploy a new version the file handle is locked by all users running the application. I wonder if I'd deploy using MSI if I could run the installation even when the .exe file is opened and locked by the users. My goal is that each user gets the new version if he/she opens the app the next time. I don't want all users to have to close the application for deployment itself.

  Read the article

• MS Excel: Can I link images using a relative path?

  - by Port Islander 2009

  I am working on an MS Excel document that contains a lot of (around 200) images. They are currently saved within the document, so the file becomes huge and working gets very slow. Linking the pictures without saving them works very well - I now have the Excel document and a folder "pictures" next to it that contains all my image files. However, when I move the document and the folder to a new location, all my pictures disappear. This seems to be because Excel saves the link information as absolute paths. (Update: Actually, according to this thread, Excel stores the link information as relative paths as well. Now I really don't know why my links break down..) Is there a convenient way to save them as relative paths or have Excel automatically update the path information? Update: It's important that the images get displayed on the sheet and can be printed. I am working with Microsoft Excel for Mac 2008 and 2011. I really appreciate your help.

  Read the article

• recommendations for disk -> usb backup software

  - by TWood

  Recently I lost a tape drive and rather than repair the unit I decided that backups to usb external drives would be cheaper. In the past I used NTBackup and figured that the new server 2008 R2 backup wbadmin utility would be able to meet my needs. It does not. I am looking for recommendations for another utility that i can use. My requirements are: -backup local disk in addition to files on a network share -scheduled task integration (or some gui options to manage schedule) -non-incremental backup Basically I could do this all with WBAdmin if it just supported network shares. I saw some links that described attaching a vhd pointed to a network share but I am trying to avoid hacks like that. If i'm going to do all that trouble I'd just as well manually copy the directories over myself. If anyone has any software suggestions that might make this task easier for me let me know please. I am considering BackupAssist but can only find a few reviews here and there for it.

  Read the article

• Reverse Proxy Server SSL?

  - by valveLondon

  Context We currently have an Apache web server in the DMZ set up as a reverse proxy and load balancer for two machines running Windows Server 2008 (IIS) inside. The Apache server has a genuine SSL certificate and serves up both http and https, however, the balancer members in the load balancing section are set to: BalancerMember {https://server1} and {https://server2}. The IIS web servers have self-signed certificates in order to respond to the https requests. My question: Do we need to forward any requests from Apache (in the DMZ) to the inside using SSL? e.g can the reverse proxy forward the requests using HTTP? and if so, why would I choose to forward them with SSL? (how secure is the http line between the dmz and the inside); In other words, can I totally disable SSL on my inside web servers?

  Read the article

• Cisco WLAN Controller not pushing out DHCP addresses, what else could it be?

  - by Name

  On our Cisco WLAN Controller web interfaces, in Controller Interfaces, I have made a new interface with these settings: VLAN Identifier 202 IP Address 172.16.202.1 Netmask 255.255.255.0 Gateway 172.16.202.254 Primary DHCP Server 172.16.100.3 Secondary DHCP Server 172.16.100.2 Port: LAG I've also made a new WLAN and assigned it to the above interface. I have saved changes. But our wireless devices, although they seem to authenticate with the WLAN fine, they always get stuck on "obtaining DHCP address", so it seems the WLAN Controller isn't pushing out DHCP addresses to our devices. We do have a DHCP scope for the above in Windows Server 2008 R2 and everything there seems fine. If I connect a device with a static address (e.g. 172.16.202.10), it will connect. Stuck on what to do :(

  Read the article

• Running VMWare EXS(i) on Apple Xserve

  - by xzyfer

  So we're running VMWare Esx(i) (I'm not completely sure which as I'm out of the office) running on Windows Server 2008. However it turns out the machine we're running it on has serious hardware limitations, most importantly it's restricted to 4gb of ram. We've since inherited a much more powerful server. The problem being the new server is an Apple Xserver running, I believe, Snow Leopard Server. My question is, can I run VMWare Exs(i) on Xserver, or an equivalent? I'm done some hardcore Googling and the best that I can find is that it's not supported, but it might work, but there are no guarantees (this has been stated many times on the VMWare forums by the VMWare support staff). But all these search results are years old, so I can't find any recent answers regarding this. Has anyone accomplished this?

  Read the article

• Can I run Win7 virtualized for my HTPC?

  - by Daniel Schaffer

  I'm currently running Vista for my HTPC, and am planning on upgrading to Win7 soon. However, I've been considering installing it as a VM so that I can run Windows Server 2008 and/or Windows Home Server. The single requirement is that the HTPC must boot up to Windows Media Center with absolutely no user intervention. I need to be able to hit the power button have it go. I've got this working currently, so I don't need to keep a keyboard or mouse plugged in - all I use is my remote. If possible, I'd love to be able to do these other things: Use Win2k8 Server as a VM host for Win7 Pro and WHS. This also lets me run IIS7 for doing ASP.NET development Use WHS for all the wonderful things it does for a home network Are either of the two optional things possible while meeting the WMC requirement?

  Read the article

• Users own mapped network drives disappear when I set a GPP mapped drive

  - by Kim

  All the clients use Windows 7 SP1 x64 Enterprise. The domain controllers are Windows Server 2008 R2. I have configured the GPP to map "\server\data" to first available drive letter starting with I:. The action is replace and I have set the Hide/Show this drive and Hide/Show all drives to "Show". I have set targeting to a specified security group. This works as expected and the drive is mapped to the correct users. The problem is that if the user has created their own mapped drives these mappings will disappear when the GPP mapping is applied. Only the mapped drives from the GPP is shown in Explorer. I have not found any other mention of this particular problem when I search the Internet and on TechNet there is no mention of what happens to drives already mapped.

  Read the article

• KVM vs Hyper-V. Which hypervisor is best for windows guests?

  - by user198851

  I am currently testing openstack for windows guests (XP and 7). I have deployed openstack "all in one" on system with following specs Processor corei5. (4 physical cores and 8 Threads with HT Technology) RAM 8 GB. HD 500 GB. I have created 4 windows xp guests with 512MB RAM and 1VCPU. On each windows guest i have installed visual studio 2008 only. In nova.conf CPU Over-Commit ratio is 2 for better performance (as mentioned in openstack operation guide). Using KVM as hyerpvisor. I have observed poor performance when simultaneously using visual studio in four windows instances. How i can improve performance ? Should i use KVM or Hyper-V ? or any other suggestion ?

  Read the article

• Hyper-v back-up

  - by Ddave23

  We are trying to decide a good backup strategy for our new Hyper-V setup. We have 3 VMs on Windows 2008 R2 Hyper-V host. We installed Symantec BackupExec 2010 on the host and have the Hyper-V Agent installed. We would like to perform a full backup at night to tape, and an incremental twice a day to a daily tape. Our environment needs constant protection for our database (Microsoft Access). Any thoughts? Should I be looking at different software?

  Read the article

• How to monitor RAM usage for Hyper-V VMs ?

  - by Mac

  A bit of context first : on Windows 2008 Standard x64 with 8Gb RAM, I have 5 VMs running which should take up 1664Mb RAM (3*256Mb+384Mb+512Mb). There is nothing else running on this server except the basic OS components (this not a Core installation). I know that each VM will use more RAM on the host than what has been configured in Hyper-V. But when I run the task manager, it says 6.7Gb used ! If I sum up the RAM used by each process in the task manager (showing all users processes), I get to something around 1Gb... So : how can I check how much RAM each VM is really using on the host (it does not seem to be available via task manager) ? Note that I am aware of the fact that my problem could be unrelated to VM RAM usage, but I would still very much like to know how to do this.

  Read the article

• Unable to connect to vrde virtualbox VM remotely

  - by b1ackjosh

  So I've remotely created my first headless using ssh. Now I'm attempting to connect to this VM using RDP so I can install Ubuntu Server, but I cannot get connected at all. When starting the VM everything appears fine: $ vboxheadless -s WebTesting Oracle VM VirtualBox Headless Interface 4.0.16 (C) 2008-2012 Oracle Corporation All rights reserved. VRDE server is listening on port 4455. And showvminfo shows: VRDE: enabled (Address 0.0.0.0, Ports 4455, MultiConn: off, ReuseSingleConn: off, Authentication type: null) However I'm still prompted with the "enter your credentials" screen every time I attempt to connect. From reading the documentation null shouldn't prompt me with this screen at all... Any help with this is greatly appreciated. P.S. I am using ssh tunneling in putty to tunnel in to my network.

  Read the article

• Why are Full GCs not running on my gcInterval I set?

  - by Brad Wood

  ColdFusion 10 Update 10 Windows Server 2008 R2 Java 1.7.0_21 I am trying to figure Full GCs to run every 10 minutes. I have used the gcInterval JVM arg in the past on earlier versions of ColdFusion with success, but I have confirmed with verbose GC logs that Full GCs are still happening on the hour (Unless the Old Gen gets so full that it forces a full collection). Here are the full JVM args from ColdFusion10\cfusion\bin\jvm.config (line breaks added for readability) Is there something else I need to be doing to get this working on ColdFusion 10? java.args= -server -Xms4072m -Xmx4072m -XX:PermSize=512m -XX:MaxPermSize=512m -Dsun.rmi.dgc.client.gcInterval=600000 -Dsun.rmi.dgc.server.gcInterval=600000 -XX:+UseParallelGC -XX:+UseParallelOldGC -Xloggc:gc.log -verbose:gc -XX:+PrintGCDetails -XX:+PrintGCDateStamps -XX:+PrintGCTimeStamps -XX:+UseGCLogFileRotation -XX:NumberOfGCLogFiles=5 -XX:GCLogFileSize=1024K -Xbatch -Dcoldfusion.home={application.home} -Dcoldfusion.rootDir={application.home} -Dcoldfusion.libPath={application.home}/lib -Dorg.apache.coyote.USE_CUSTOM_STATUS_MSG_IN_HEADER=true -Dcoldfusion.jsafe.defaultalgo=FIPS186Random -Dcoldfusion.classPath={application.home}/lib/updates,{application.home}/lib,{application.home}/lib/axis2,{application.home}/gateway/lib/,{application.home}/wwwroot/WEB-INF/flex/jars,{application.home}/wwwroot/WEB-INF/cfform/jars

  Read the article

• reclaim space after moving indexes to file group

  - by Titan2782

  I have an extremely large database and most of the space is the index size. I moved several indexes to a different file group (just to experiment) but no matter what I do I cannot reduce the size of the MDF. I tried shrink database, shrink files, rebuilding clustered index. What can I do to reclaim that space in the MDF? I've moved 15GB worth of indexes to a different file group. Is it even possible to reduce my mdf by that same 15gb (or close to it)? SQL Server 2008 Enterprise

  Read the article

• Exchange 2007 automatically adding IP to block list

  - by Tim Anderson

  This puzzled me. We have all mail directed to an ISP's spam filter, then delivered to SBS 2008 Exchange. One of the ISP's IP numbers suddenly appeared in the ES2007 block list, set to expire in 24 hours I think, so emails started bouncing. Quick look through the typically ponderous docs, and I can't see anything that says Exchange will auto-block an IP number, but nobody is admitting to adding it manually and I think it must have done. Anyone know about this or where it is configured? Obviously one could disable block lists completely but I'd like to know exactly why this happened.

  Read the article

• Change domain password from non-domain computer (AD)

  - by Josh

  I have a domain controller on Windows Server 2008. When I set up my users, I gave them all a dummy password with the "must change on next login" checked. Everyone's machine is all on the same network as the domain controller, but we are not forcing them to join their computers to the domain. The DC has a website which requires the use of domain accounts to access it. How do I tell my users to change their domain passwords without connecting their PC to the domain or making them log in to a machine on the domain? I do not want anything I will have to install on each client to allow them to change their passwords (I have a password expiration policy). Most of these workstations are XP.

  Read the article

• How can I fully automate the creation and configuration of a SharePoint virtual machine?

  - by vnat

  I typically require multiple SharePoint virtual machines for development purposes. I currently manually build these every time I need one, either starting from a fresh OS install or using sysprep when working with SharePoint 2010 and SQL Server 2008 R2. I currently use VMWare, but am open to VirtualBox or Hyper-V. I'd like to be able to go from zero to a working VM with SharePoint, SQL and Visual Studio all through script. Is this a feasible task? Or are there more practical methods which would start from a VM with a fresh installation of an OS, and then use more standard unattended installs. Although general, I'd like to know which direction to focus my efforts. Thanks in advance, vnat

  Read the article

< Previous Page | 424 425 426 427 428 429 430 431 432 433 434 435  | Next Page >