Search Results

Search found 14157 results on 567 pages for 'drive failure'.

Page 428/567 | < Previous Page | 424 425 426 427 428 429 430 431 432 433 434 435  | Next Page >

• Trying to get a PC to boot off a bootable SD card that is inside an USB attached Android device.

  - by Cyril

  First, I'd like to make myself look less a madman than I may have appeared to be. I wanted to have a bootable USB stick with me at all times, but it's less convenient because it's an extra object and it's easier to lose, forget etc. Then I thought, I have an Android phone, and it has a micro SD in it; perfect. Not all PC's can boot off a card reader, but the phone itself is a card reader when attached as a disk drive. Or at least so I thought. Turns out that my netbook BIOS (tested on Asus eeePC) refuses to see it as an external harddrive; it only recognizes it as a generic USB device and doesn't offer an option to boot from it. The device has a name "Android phone" or smth, so it seems to me that it doesn't work as a "pure" card reader, and instead still manifests itself as a phone. Can it be somehow overridden?

  Read the article

• MacBook Pro screen goes dark

  - by Mike M

  I've had my MacBook Pro for two years now; no problems so far (it has had 3rd party RAM from the get go). Today, I'm copying a particularly large VM from an External disk drive to local MacBook disk. It has about 3GB to go and I take off to do some other things and when I come back my screen is "dark". The computer is still on but I can't see anything. I forced a reboot by holding down the power button, it starts up with the "chimes", but still no screen. I've done this several times. Any ideas? Do you think the hard disk activity caused it to get too hot?

  Read the article

• Deploy Windows 7 Backup set to Windows 8

  - by Matthias

  Situation: We have a laptop here that's completely fubar. I.e: The hard drive is filled to the brim with bad sectors. Luckily, backups have been made using the built-in Windows 7 backup feature. This produces folders named Backup Set 2012-11-09 003009, containing folders like Backup Files 2012-11-09 003009, containing zip-files like Backup files 1, 2, 3,... Our brand new laptop comes with Windows 8. Now: Can we, using the standard back-up and restore feature in Windows 8, restore all the documents, music, etc. using the Windows 7 backup files? Thanks. (FYI: We also took a normal backup of all the documents just to be sure of course. I'm just curious what would happen. I would test it out, but the new laptop hasn't arrived yet and I wanted to make sure my efforts would not be in vain.)

  Read the article

• Easy File Locker Locked My Desktop

  - by user20358

  I'm happy with easy file locker, it does as promised. Last night I decided to lock all my files. C:users/Barry Some how my desktop is locked. When I closed EFL my desktop went black. Safe mode is still black. Help Below are my spec's eMachines ET1161-03 CPU: Athlon 64 X2 4400+; CPU speed: 2300GHz; Graphics adapter: nVidia GeForce 6150SE; Monitor: No; Hard drive size: 320GB; WorldBench rating: Fair

  Read the article

• How do I force specific permissions for new files/folders on Linux file server?

  - by humble_coder

  I'm having an issue with my install of Ubuntu 9.10 (file server) and its samba permissions. Logging in and reading works fine. However, creation of new directories by users restricts access for other users. For instance, if Bob (Windows user who maps the drive) creates a folder in the directory, Jane (Mac user that simply smb mounts) can read from it, but can't write to it -- and vice versa. I then must go CHMOD 777 the directory for everyone to be happy. I've tried editing the "create/directory mask", and "force" options in the smb.conf file but this doesn't seem to help. I'm about to resort to CRONTABing a recursive chmod routine, although I'm sure this isn't the fix. How do I get all new items to always be 777? Does anyone have any suggestions to fix this ever-occurring situation? Best

  Read the article

• update ocz vertex le capacity via firmware update

  - by Ben Voigt

  I have an OCZ Vertex LE 100GB drive. It's actually 128GiB of NAND flash, with a whopping 28%+ reserved for write combining. Most 128GiB drives are actually ~ 115GB usable (and marketed as 120GB or 128GB). There were rumors that the reserved fraction could be decreased on OCZ 100GB drives. Can anyone provide a link to firmware that does that, or an official statement that no such firmware exists? (NB: I recently installed the 1.24 firmware from the OCZ site, it didn't affect the capacity. Possibly because the rumors say the capacity change is destructive to existing content.) Of possible interest: flashing firmware was more of a pain than it should have been -- the tool didn't detect the disk until I booted an older Windows install off a secondary hard disk, I suspect the Intel SATA driver is the issue and tool only works with the msachi.sys driver.

  Read the article

• Backup Exec backup-to-disk folder creation - Access denied

  - by ewwhite

  I'm having a difficult time creating a backup-to-disk folder in Symantec Backup Exec 12.5 and Backup Exec 2010. The backend storage is a Nexenta/ZFS-based NAS filer sharing the volume via CIFS. I've also seen the issue on other *nix-based NAS devices. I've attempted mapping the drive, providing the full paths to the folder, etc. I can browse to the share just fine from within Windows, but Backup Exec fails to create the B2D folder with different variants of a Unable to create new backup folder. Access denied error. I've attempted creating service accounts in Backup Exec to handle the authentication, but nothing seems to work. What's the key to making this work?

  Read the article

• Missing HDD space - says 65GB used, selecting all folders shows 40GB used

  - by Igor K

  Hi Running Windows Server 2008, 74GB raptor drive and noticed we only had about 500MB left - yikes! So deleted some old backups we don't need, but can't track down where about 25GB seems to be taken up. If I go to C: and select all folders and go to properties, this comes to around 40GB but in My Computer I can see 65GB is used. How can I find out whats eating the space? Just IIS + MSSQL Express + Smartermail on the server EDIT Checked to show hidden folders plus protected operating system files - 41.8GB usage, so 24.6GB is missing somewhere. Theres no system restore even installed on the server

  Read the article

• Any way to know what files were in a broken ZFS pool?

  - by Erik Tjernlund

  I have a large ZFS pool of 4 combined drives. Now, the filesystem can not be mounted: pool: tank state: UNAVAIL status: One or more devices could not be opened. There are insufficient replicas for the pool to continue functioning. action: Attach the missing device and online it using 'zpool online'. see: http://www.sun.com/msg/ZFS-8000-3C scan: none requested config: NAME STATE READ WRITE CKSUM tank UNAVAIL 0 0 0 insufficient replicas c10t0d0 ONLINE 0 0 0 c8t0d0 UNAVAIL 0 0 0 cannot open c8t1d0 ONLINE 0 0 0 c10t1d0 ONLINE 0 0 0 Probably a broken drive (c8t0d0). I'm not overly concerned by the loss of the data, but I'd love to know exactly which files were in that pool. Is there any way to get a listing of what files were there?

  Read the article

• Gparted: Copy Greyed Out

  - by David

  I booted my system to a gparted linux live CD and I have two partitions: /dev/sda1 /dev/sda2 I want to move both of them to my new physical hard drive (called /dev/sdb). When I right click on /dev/sda1, I can choose copy and then paste it onto /dev/sdb. When I right click on /dev/sda2, copy is greyed out and there is a yellow exclamation point to the left of the disk. I know that the disk works since I can boot my computer from it. Why won't gparted let me copy /dev/sda2 to my new hard disk? Since the option is greyed out, I don't even get an error message. Thanks!

  Read the article

• tradeoffs of iSCSI vs. AFP when using Time Machine with a NAS?

  - by ajit.george

  I'm setting up a home NAS device (Synology DS409) that I'm planning to use for Time Machine backups (amongst other things). What are the tradeoffs between using iSCSI or AFP to mount the backup volume? The Synology wiki suggests that iSCSI is better if the Mac will be frequently disconnected from the network or sleeping, from the point of view of the volume automatically remounting. What about filesystem consistency? Given that unplugging a USB drive without properly unmounting it often requires the Time Machine volume to be repaired, would iSCSI have the same issues? Thanks in advance.

  Read the article

• Allow READ access to local folders in 2003SBS AD

  - by Dan M.

  Have a SBS2003 client with a mess of a domain that is in process of being cleaned. But, for the life of me I cannot find a setting that will allow write access to the local hard disk for domain users with redirected profiles(to the server). This is needed only for one program that will not follow a symbolic link to the network path, instead it seems to be hard coded to the %appdata% folder but only on the c: drive.... So question is how can I allow "Domain users" write access to the local %appdata% directory? I have tried setting it manually on a machine but it kept resetting to RO no matter how many times I tried. Everytime I would uncheck the RO property it would reset sometime right after i hit OK. Thanks in advance! Dan

  Read the article

• What is the safest and least expensive way to store 10 terabytes of data?

  - by Josh T

  I'm a member of a production company and we're preparing for our first feature film. We've been discussing methods of data storage to keep all of our original content safe (for as long as possible). While we understand data is never 100% safe, we'd like to find the safest solution for us. We've considered: 16TB NAS for on-site storage 4-5 2TB hard drives (cheap, but not redundant), copy original footage to drives then seal in static free bag Burn data to Blu-Ray disks (time consuming and expensive: 200 disks == $5000) Tape drive(s)? I know the least about tape drives, except the fact that they're more reliable than disks. Any experience/knowledge with this amount of data is hugely appreciated.

  Read the article

• Iptables mark incoming packet - vpn routing

  - by Tom

  I have connected my home to my workplace for out of house backup reasons through openvpn. The connection is working nicely. At work I have 5 fixed IP addresses. Now I would like to assign one of these IP addresses to be forwarded to my home machine. I have confirmed packet arrival at my home machine with tcpdump. The problem is that my default route at home is NOT the tun0 (naturally), but eth0 to my own ISP. So I created a separate routing table to route my tun0 packets back to where they belong, but do not how to mark the incoming packet which arrive through tun0 with iptables, so I can drive them back. I do not want any port restrictions, but only what comes from tun0 should leave through tun0 thanks tom

  Read the article

• FDE with DiskCryptor V1 (TRIM Support) on Crucial M4 SSD on W7 x64 - Unpartitioned Space?

  - by JamesM

  I have a new Alienware m11 laptop with a brand new Crucial M4 128GB SSD. I have installed the SSD but not used it yet. I am thinking of using FDE with DiskCryptor 1.0.732.111. I will install Win7 Pro x64. I have read about support for TRIM in v1.0.732.111 but also about leaving unpartitioned space. My SSD drive, 'Crucual M4' does not have a manufacturer built-in reserve like other drives. My questions are: Should I leave some free unpartitioned space with v1 of DC and W7x64 even though it will support TRIM or should I not do this? Should I install DC v1 first or after installing Windows 7 (assuming it is brand new, never been used SSD)?

  Read the article

• Mount "Macrium Reflect" on a partition, boot from there ?

  - by b e

  Can Macrium's Reflect recovery CD be mounted/used with GRUB ? If the cd can be 'put' (loaded/mounted/...) in a partition, then the only disc needed would be the actual recovery disc, which could be on an external hard drive, or even on the same machine in another partition, thus allowing on to recover using only what's on the machine itself. I have WXPpro and Xubuntu8.04 double mounted, really happy with them together, use each right now to fix problems with the other when they come up. Also have a partition for the Reflect CD, but I just can't get it to load from Grub, which would be great... Thanks for any thoughts, probably someone has already done this I know !

  Read the article

• After enabling raid0, blue screen of death

  - by thegreyspot

  Hi! Im trying to get a raid0 setup going. I have a 750 gb hdd with the OS on it and two 80gb HDD. For right now, I just want to raid0 on the two 80Gb hdd. When I enable raid in my Bios, Win7 has a BSOD during boot. As far as I understand I need to install raid drivers. However how can I do this? The win7 DVD doesnt seem to have a driver install option. Any suggestions? Thanks EDIT: I saw that there was as seperate setting for the 4th and 5th sata ports. So I pluged in my OS drive into there and left it on IDE. Still didnt work though, am I miss understanding that idealogy?

  Read the article

• How to create an UEFI bootable USB stick from an ISO

  - by shiin

  I have an ISO image of my backup solution's recovery cd. When I burn the image to a CD-ROM, I can boot from it in UEFI or normal mode without problems. Unfortunately, this is no solution for my laptop, as it does not have an optical drive. Thus, I tried to create a bootable USB stick that can also boot in UEFI mode, but so far I have not been successful (note that the laptop has UEFI and boots Windows 7 in UEFI mode). So my question is, if anyone knows how I can get said ISO on my USB stick so that it boots as if I would use a CD-ROM?

  Read the article

• Choosing A Power Supply [closed]

  - by Geeks On Hugs

  Possible Duplicate: Power Supply Capacity Formula How can I check if my system needs more PSU power? I'm not sure if it's OK or not to ask a hardware question here. If not please let me know a good place but I've always got good info here so I thought I'd give it a shot. I'm custom building a new workstation for coding (Linux/Eclipse). How do I determine how much power the power supply needs? I'm building a mini ITX system on a budget and so I need to get as small as possible that is sufficient. I'll have a mini itx mobo with on board wifi and bluetooth, 8 GB RAM, an Intel i3 3.1 Ghz processor, 64 GB SSD and a slim optical drive. In the future I might add a descrete GPU, 16 GB RAM, 128 GB SSD. What is the minimum power I need and how do I calculate that?

  Read the article

• Windows 8 - Ubuntu dual boot

  - by Serkan Özkan

  I bought a new Toshiba s855 notebook with windows 8 preinstalled. Secure boot feature was enabled by default. I installed latest version of ubuntu after disabling secure boot feature(it was not possible to install ubuntu without disabling secure boot). But now when I enable secure boot, the system automatically boots into windows 8, and it boots into ubuntu when I disable secure boot. EasyBCD lists the following boot entries but I can only see Windows 8 in boot menu: Default: Windows 8 Timeout: 7 seconds EasyBCD Boot Device: C:\ Entry #1 Name: Ubuntu BCD ID: {971641cd-304a-11e2-be82-806e6f6e6963} Device: \Device\HarddiskVolume2 Bootloader Path: \EFI\ubuntu\grubx64.efi ... Entry #5 Name: Windows 8 BCD ID: {current} Drive: C:\ Bootloader Path: \windows\system32\winload.efi Any recommendations will be appreciated.

  Read the article

• Windows 7, files reappear after deletion.

  - by HeavyWave

  I'm trying to delete some files from a folder. I've taken ownership of the files and the folder. When I delete these files Windows doesn't report any errors and deletes them. BUT, after I press F5 these files reappear again. There are no messages whatsoever, they are just undeletable. I know login off will help, but how do I fix it without going through the pain of closing everything down? P.S. Files disappear from the folder after aprox. 5 minutes. Update. Turns out my version of Windows did not properly upgrade from test version, so it had some weird disk drive issues.

  Read the article

• Reading Data from the Entire Surface of a CD, DVD

  - by Hypertext

  Is it possible to retrieve data from the entire surface of a compact disc. Suppose a CD written with 300MB of data where the remaining 400MB is blank. Normally, computer doesn't bother with the 400MB region when reading it because the filesystem ends at 300MB. But, is it possible to make the CD drive retrieve data from the rest of the surface. Idea is to retrieve something from outside the image. If possible, true it might return useless 0s or 255s data. But, is it really possible?

  Read the article

• Linux only recognizes 800Mhz from 2Ghz

  - by Leo

  I tried with Suse 11 (KDE), Xubuntu 11.10 and Lubuntu 11.10 and these systems only recognizes 800Mhz from my processor of 2Ghz! The utilities I used are: linuxinfo, sysinfo, "system profiler and benchmark". And all of this only shows 800Mhz My system specs are: AMD Turion 64 Mobile MK36 512 RAM nVidia Geforce Go 6150 (I also tried with nVidia restricted drivers) 120GB Hard drive The weirdest thing is that Windows XP and 7 recognize the 2Ghz of my processor, What can I do? p.s. (It is not just the value of 800Mhz, I also feel my system very slow with linux)

  Read the article

• How do you sync photos with your family?

  - by romkyns

  We've always been trying to share photos within our family, despite all living in different countries. This has been very challenging. We have about 50GB of photos that we share with each other. Everyone organizes them differently, so rsync/Syncplicity don't work. Everyone likes their photos on the fast hard drive rather than a slow website with reduced quality, so online sharing websites are a no-go. So far we have been essentially syncing them manually, via a shared folder that new photos are placed to and collected from. This is laborious and prone to errors, that usually leave one of us without all the photos without even knowing. To those who are in a similar situation, how do you solve this?

  Read the article

• Restoring Mac-bootcamp-windows-partition image to Windows machine

  - by jpwagner

  Hi, I'm running Windows XP sp3 on my mac using bootcamp. Objective: I'd like to move this partition to a windows machine. This is what I tried: 1. create image using winclone 2. restore drive to disk partition on windows machine using paragon 3. reboot from new partition Results: it attempts to boot in XP (windows flag and progress bar load screen) but then gives me the old BSOD. safe mode just hangs while loading. (I then uninstalled KB977165 on a hunch, but that did nothing to help the issue.) Any ideas, advice, etc would be greatly appreciated. Thanks!

  Read the article

< Previous Page | 424 425 426 427 428 429 430 431 432 433 434 435  | Next Page >